Convert the nand driver to a platform_device, should only allow routerboards to use it
[librecmc/librecmc.git] / target / linux / adm5120-2.6 / files / arch / mips / adm5120 / boards / mikrotik.c
1 /*
2  *  $Id$
3  *
4  *  Mikrotik RouterBOARDs 111/112/133/133C/153
5  *
6  *  Copyright (C) 2007 OpenWrt.org
7  *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
8  *
9  *  This program is free software; you can redistribute it and/or
10  *  modify it under the terms of the GNU General Public License
11  *  as published by the Free Software Foundation; either version 2
12  *  of the License, or (at your option) any later version.
13  *
14  *  This program is distributed in the hope that it will be useful,
15  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *  GNU General Public License for more details.
18  *
19  *  You should have received a copy of the GNU General Public License
20  *  along with this program; if not, write to the
21  *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
22  *  Boston, MA  02110-1301, USA.
23  *
24  */
25
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28
29 #include <asm/bootinfo.h>
30 #include <asm/gpio.h>
31
32 #include <asm/mach-adm5120/adm5120_board.h>
33 #include <asm/mach-adm5120/adm5120_platform.h>
34
35 static struct mtd_partition rb1xx_partitions[] = {
36         {
37                 .name   = "booter",
38                 .offset = 0,
39                 .size   = 64*1024,
40                 .mask_flags = MTD_WRITEABLE,
41         } , {
42                 .name   = "firmware",
43                 .offset = MTDPART_OFS_APPEND,
44                 .size   = MTDPART_SIZ_FULL,
45         }
46 };
47
48 static struct platform_device *rb1xx_devices[] __initdata = {
49         &adm5120_flash0_device,
50         &adm5120_nand_device,
51 };
52
53 static void __init rb1xx_setup(void)
54 {
55         /* setup data for flash0 device */
56         adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions);
57         adm5120_flash0_data.parts = rb1xx_partitions;
58
59         /* TODO: setup mac address */
60 }
61
62 static struct adm5120_board rb111_board __initdata = {
63         .mach_type      = MACH_ADM5120_RB_111,
64         .name           = "Mikrotik RouterBOARD 111",
65         .board_setup    = rb1xx_setup,
66         .num_eth_ports  = 1,
67         .num_devices    = ARRAY_SIZE(rb1xx_devices),
68         .devices        = rb1xx_devices,
69 };
70
71 static struct adm5120_board rb112_board __initdata = {
72         .mach_type      = MACH_ADM5120_RB_112,
73         .name           = "Mikrotik RouterBOARD 112",
74         .board_setup    = rb1xx_setup,
75         .num_eth_ports  = 1,
76         .num_devices    = ARRAY_SIZE(rb1xx_devices),
77         .devices        = rb1xx_devices,
78 };
79
80 static struct adm5120_board rb133_board __initdata = {
81         .mach_type      = MACH_ADM5120_RB_133,
82         .name           = "Mikrotik RouterBOARD 133",
83         .board_setup    = rb1xx_setup,
84         .num_eth_ports  = 3,
85         .num_devices    = ARRAY_SIZE(rb1xx_devices),
86         .devices        = rb1xx_devices,
87 };
88
89 static struct adm5120_board rb133c_board __initdata = {
90         .mach_type      = MACH_ADM5120_RB_133C,
91         .name           = "Mikrotik RouterBOARD 133C",
92         .board_setup    = rb1xx_setup,
93         .num_eth_ports  = 1,
94         .num_devices    = ARRAY_SIZE(rb1xx_devices),
95         .devices        = rb1xx_devices,
96 };
97
98 static struct adm5120_board rb153_board __initdata = {
99         .mach_type      = MACH_ADM5120_RB_153,
100         .name           = "Mikrotik RouterBOARD 153",
101         .board_setup    = rb1xx_setup,
102         .num_eth_ports  = 5,
103         .num_devices    = ARRAY_SIZE(rb1xx_devices),
104         .devices        = rb1xx_devices,
105 };
106
107 static int __init register_boards(void)
108 {
109         adm5120_board_register(&rb111_board);
110         adm5120_board_register(&rb112_board);
111         adm5120_board_register(&rb133_board);
112         adm5120_board_register(&rb133c_board);
113         adm5120_board_register(&rb153_board);
114         return 0;
115 }
116
117 pure_initcall(register_boards);