1 // SPDX-License-Identifier: GPL-2.0-only
3 * skl-sst-cldma.c - Code Loader DMA handler
5 * Copyright (C) 2015, Intel Corporation.
6 * Author: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
7 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
10 #include <linux/device.h>
12 #include <linux/delay.h>
13 #include "../common/sst-dsp.h"
14 #include "../common/sst-dsp-priv.h"
16 static void skl_cldma_int_enable(struct sst_dsp *ctx)
18 sst_dsp_shim_update_bits_unlocked(ctx, SKL_ADSP_REG_ADSPIC,
19 SKL_ADSPIC_CL_DMA, SKL_ADSPIC_CL_DMA);
22 void skl_cldma_int_disable(struct sst_dsp *ctx)
24 sst_dsp_shim_update_bits_unlocked(ctx,
25 SKL_ADSP_REG_ADSPIC, SKL_ADSPIC_CL_DMA, 0);
28 static void skl_cldma_stream_run(struct sst_dsp *ctx, bool enable)
33 sst_dsp_shim_update_bits_unlocked(ctx,
34 SKL_ADSP_REG_CL_SD_CTL,
35 CL_SD_CTL_RUN_MASK, CL_SD_CTL_RUN(enable));
40 /* waiting for hardware to report that the stream Run bit set */
41 val = sst_dsp_shim_read(ctx, SKL_ADSP_REG_CL_SD_CTL) &
45 else if (!enable && !val)
51 dev_err(ctx->dev, "Failed to set Run bit=%d enable=%d\n", val, enable);
54 static void skl_cldma_stream_clear(struct sst_dsp *ctx)
56 /* make sure Run bit is cleared before setting stream register */
57 skl_cldma_stream_run(ctx, 0);
59 sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
60 CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(0));
61 sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
62 CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(0));
63 sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
64 CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(0));
65 sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
66 CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(0));
68 sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL, CL_SD_BDLPLBA(0));
69 sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU, 0);
71 sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, 0);
72 sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, 0);
75 /* Code loader helper APIs */
76 static void skl_cldma_setup_bdle(struct sst_dsp *ctx,
77 struct snd_dma_buffer *dmab_data,
78 __le32 **bdlp, int size, int with_ioc)
82 ctx->cl_dev.frags = 0;
84 phys_addr_t addr = virt_to_phys(dmab_data->area +
85 (ctx->cl_dev.frags * ctx->cl_dev.bufsize));
87 bdl[0] = cpu_to_le32(lower_32_bits(addr));
88 bdl[1] = cpu_to_le32(upper_32_bits(addr));
90 bdl[2] = cpu_to_le32(ctx->cl_dev.bufsize);
92 size -= ctx->cl_dev.bufsize;
93 bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01);
102 * Configure the registers to update the dma buffer address and
104 * Note: Using the channel 1 for transfer
106 static void skl_cldma_setup_controller(struct sst_dsp *ctx,
107 struct snd_dma_buffer *dmab_bdl, unsigned int max_size,
110 skl_cldma_stream_clear(ctx);
111 sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL,
112 CL_SD_BDLPLBA(dmab_bdl->addr));
113 sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU,
114 CL_SD_BDLPUBA(dmab_bdl->addr));
116 sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, max_size);
117 sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, count - 1);
118 sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
119 CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(1));
120 sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
121 CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(1));
122 sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
123 CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(1));
124 sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
125 CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(FW_CL_STREAM_NUMBER));
128 static void skl_cldma_setup_spb(struct sst_dsp *ctx,
129 unsigned int size, bool enable)
132 sst_dsp_shim_update_bits_unlocked(ctx,
133 SKL_ADSP_REG_CL_SPBFIFO_SPBFCCTL,
134 CL_SPBFIFO_SPBFCCTL_SPIBE_MASK,
135 CL_SPBFIFO_SPBFCCTL_SPIBE(1));
137 sst_dsp_shim_write_unlocked(ctx, SKL_ADSP_REG_CL_SPBFIFO_SPIB, size);
140 static void skl_cldma_cleanup_spb(struct sst_dsp *ctx)
142 sst_dsp_shim_update_bits_unlocked(ctx,
143 SKL_ADSP_REG_CL_SPBFIFO_SPBFCCTL,
144 CL_SPBFIFO_SPBFCCTL_SPIBE_MASK,
145 CL_SPBFIFO_SPBFCCTL_SPIBE(0));
147 sst_dsp_shim_write_unlocked(ctx, SKL_ADSP_REG_CL_SPBFIFO_SPIB, 0);
150 static void skl_cldma_cleanup(struct sst_dsp *ctx)
152 skl_cldma_cleanup_spb(ctx);
153 skl_cldma_stream_clear(ctx);
155 ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_data);
156 ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_bdl);
159 int skl_cldma_wait_interruptible(struct sst_dsp *ctx)
163 if (!wait_event_timeout(ctx->cl_dev.wait_queue,
164 ctx->cl_dev.wait_condition,
165 msecs_to_jiffies(SKL_WAIT_TIMEOUT))) {
166 dev_err(ctx->dev, "%s: Wait timeout\n", __func__);
171 dev_dbg(ctx->dev, "%s: Event wake\n", __func__);
172 if (ctx->cl_dev.wake_status != SKL_CL_DMA_BUF_COMPLETE) {
173 dev_err(ctx->dev, "%s: DMA Error\n", __func__);
178 ctx->cl_dev.wake_status = SKL_CL_DMA_STATUS_NONE;
182 static void skl_cldma_stop(struct sst_dsp *ctx)
184 skl_cldma_stream_run(ctx, false);
187 static void skl_cldma_fill_buffer(struct sst_dsp *ctx, unsigned int size,
188 const void *curr_pos, bool intr_enable, bool trigger)
190 dev_dbg(ctx->dev, "Size: %x, intr_enable: %d\n", size, intr_enable);
191 dev_dbg(ctx->dev, "buf_pos_index:%d, trigger:%d\n",
192 ctx->cl_dev.dma_buffer_offset, trigger);
193 dev_dbg(ctx->dev, "spib position: %d\n", ctx->cl_dev.curr_spib_pos);
196 * Check if the size exceeds buffer boundary. If it exceeds
197 * max_buffer size, then copy till buffer size and then copy
198 * remaining buffer from the start of ring buffer.
200 if (ctx->cl_dev.dma_buffer_offset + size > ctx->cl_dev.bufsize) {
201 unsigned int size_b = ctx->cl_dev.bufsize -
202 ctx->cl_dev.dma_buffer_offset;
203 memcpy(ctx->cl_dev.dmab_data.area + ctx->cl_dev.dma_buffer_offset,
207 ctx->cl_dev.dma_buffer_offset = 0;
210 memcpy(ctx->cl_dev.dmab_data.area + ctx->cl_dev.dma_buffer_offset,
213 if (ctx->cl_dev.curr_spib_pos == ctx->cl_dev.bufsize)
214 ctx->cl_dev.dma_buffer_offset = 0;
216 ctx->cl_dev.dma_buffer_offset = ctx->cl_dev.curr_spib_pos;
218 ctx->cl_dev.wait_condition = false;
221 skl_cldma_int_enable(ctx);
223 ctx->cl_dev.ops.cl_setup_spb(ctx, ctx->cl_dev.curr_spib_pos, trigger);
225 ctx->cl_dev.ops.cl_trigger(ctx, true);
229 * The CL dma doesn't have any way to update the transfer status until a BDL
230 * buffer is fully transferred
232 * So Copying is divided in two parts.
233 * 1. Interrupt on buffer done where the size to be transferred is more than
235 * 2. Polling on fw register to identify if data left to transferred doesn't
236 * fill the ring buffer. Caller takes care of polling the required status
237 * register to identify the transfer status.
238 * 3. if wait flag is set, waits for DBL interrupt to copy the next chunk till
240 * if wait flag is not set, doesn't wait for BDL interrupt. after ccopying
241 * the first chunk return the no of bytes_left to be copied.
244 skl_cldma_copy_to_buf(struct sst_dsp *ctx, const void *bin,
245 u32 total_size, bool wait)
249 unsigned int excess_bytes;
251 unsigned int bytes_left = total_size;
252 const void *curr_pos = bin;
257 dev_dbg(ctx->dev, "%s: Total binary size: %u\n", __func__, bytes_left);
260 if (bytes_left > ctx->cl_dev.bufsize) {
263 * dma transfers only till the write pointer as
266 if (ctx->cl_dev.curr_spib_pos == 0)
267 ctx->cl_dev.curr_spib_pos = ctx->cl_dev.bufsize;
269 size = ctx->cl_dev.bufsize;
270 skl_cldma_fill_buffer(ctx, size, curr_pos, true, start);
274 ret = skl_cldma_wait_interruptible(ctx);
281 skl_cldma_int_disable(ctx);
283 if ((ctx->cl_dev.curr_spib_pos + bytes_left)
284 <= ctx->cl_dev.bufsize) {
285 ctx->cl_dev.curr_spib_pos += bytes_left;
287 excess_bytes = bytes_left -
288 (ctx->cl_dev.bufsize -
289 ctx->cl_dev.curr_spib_pos);
290 ctx->cl_dev.curr_spib_pos = excess_bytes;
294 skl_cldma_fill_buffer(ctx, size,
295 curr_pos, false, start);
298 curr_pos = curr_pos + size;
306 void skl_cldma_process_intr(struct sst_dsp *ctx)
308 u8 cl_dma_intr_status;
311 sst_dsp_shim_read_unlocked(ctx, SKL_ADSP_REG_CL_SD_STS);
313 if (!(cl_dma_intr_status & SKL_CL_DMA_SD_INT_COMPLETE))
314 ctx->cl_dev.wake_status = SKL_CL_DMA_ERR;
316 ctx->cl_dev.wake_status = SKL_CL_DMA_BUF_COMPLETE;
318 ctx->cl_dev.wait_condition = true;
319 wake_up(&ctx->cl_dev.wait_queue);
322 int skl_cldma_prepare(struct sst_dsp *ctx)
327 ctx->cl_dev.bufsize = SKL_MAX_BUFFER_SIZE;
329 /* Allocate cl ops */
330 ctx->cl_dev.ops.cl_setup_bdle = skl_cldma_setup_bdle;
331 ctx->cl_dev.ops.cl_setup_controller = skl_cldma_setup_controller;
332 ctx->cl_dev.ops.cl_setup_spb = skl_cldma_setup_spb;
333 ctx->cl_dev.ops.cl_cleanup_spb = skl_cldma_cleanup_spb;
334 ctx->cl_dev.ops.cl_trigger = skl_cldma_stream_run;
335 ctx->cl_dev.ops.cl_cleanup_controller = skl_cldma_cleanup;
336 ctx->cl_dev.ops.cl_copy_to_dmabuf = skl_cldma_copy_to_buf;
337 ctx->cl_dev.ops.cl_stop_dma = skl_cldma_stop;
340 ret = ctx->dsp_ops.alloc_dma_buf(ctx->dev,
341 &ctx->cl_dev.dmab_data, ctx->cl_dev.bufsize);
343 dev_err(ctx->dev, "Alloc buffer for base fw failed: %x\n", ret);
346 /* Setup Code loader BDL */
347 ret = ctx->dsp_ops.alloc_dma_buf(ctx->dev,
348 &ctx->cl_dev.dmab_bdl, PAGE_SIZE);
350 dev_err(ctx->dev, "Alloc buffer for blde failed: %x\n", ret);
351 ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_data);
354 bdl = (__le32 *)ctx->cl_dev.dmab_bdl.area;
357 ctx->cl_dev.ops.cl_setup_bdle(ctx, &ctx->cl_dev.dmab_data,
358 &bdl, ctx->cl_dev.bufsize, 1);
359 ctx->cl_dev.ops.cl_setup_controller(ctx, &ctx->cl_dev.dmab_bdl,
360 ctx->cl_dev.bufsize, ctx->cl_dev.frags);
362 ctx->cl_dev.curr_spib_pos = 0;
363 ctx->cl_dev.dma_buffer_offset = 0;
364 init_waitqueue_head(&ctx->cl_dev.wait_queue);