1 /* vi: set sw=4 ts=4: */
3 * sh.c -- a prototype Bourne shell grammar parser
4 * Intended to follow the original Thompson and Ritchie
5 * "small and simple is beautiful" philosophy, which
6 * incidentally is a good match to today's BusyBox.
8 * Copyright (C) 2000,2001 Larry Doolittle <larry@doolittle.boa.org>
11 * The parser routines proper are all original material, first
12 * written Dec 2000 and Jan 2001 by Larry Doolittle.
13 * The execution engine, the builtins, and much of the underlying
14 * support has been adapted from busybox-0.49pre's lash,
15 * which is Copyright (C) 2000 by Lineo, Inc., and
16 * written by Erik Andersen <andersen@lineo.com>, <andersee@debian.org>.
17 * That, in turn, is based in part on ladsh.c, by Michael K. Johnson and
18 * Erik W. Troan, which they placed in the public domain. I don't know
19 * how much of the Johnson/Troan code has survived the repeated rewrites.
21 * simple_itoa() was lifted from boa-0.93.15
22 * b_addchr() derived from similar w_addchar function in glibc-2.2
23 * setup_redirect(), redirect_opt_num(), and big chunks of main()
24 * and many builtins derived from contributions by Erik Andersen
25 * miscellaneous bugfixes from Matt Kraai
27 * There are two big (and related) architecture differences between
28 * this parser and the lash parser. One is that this version is
29 * actually designed from the ground up to understand nearly all
30 * of the Bourne grammar. The second, consequential change is that
31 * the parser and input reader have been turned inside out. Now,
32 * the parser is in control, and asks for input as needed. The old
33 * way had the input reader in control, and it asked for parsing to
34 * take place as needed. The new way makes it much easier to properly
35 * handle the recursion implicit in the various substitutions, especially
36 * across continuation lines.
38 * Bash grammar not implemented: (how many of these were in original sh?)
39 * $@ (those sure look like weird quoting rules)
41 * ! negation operator for pipes
42 * &> and >& redirection of stdout+stderr
45 * fancy forms of Parameter Expansion
47 * Arithmetic Expansion
48 * <(list) and >(list) Process Substitution
49 * reserved words: case, esac, select, function
50 * Here Documents ( << word )
53 * job handling woefully incomplete and buggy
54 * reserved word execution woefully incomplete and buggy
56 * port selected bugfixes from post-0.49 busybox lash - done?
57 * finish implementing reserved words: for, while, until, do, done
58 * change { and } from special chars to reserved words
59 * builtins: break, continue, eval, return, set, trap, ulimit
61 * handle children going into background
62 * clean up recognition of null pipes
63 * check setting of global_argc and global_argv
64 * control-C handling, probably with longjmp
65 * follow IFS rules more precisely, including update semantics
66 * figure out what to do with backslash-newline
67 * explain why we use signal instead of sigaction
68 * propagate syntax errors, die on resource errors?
69 * continuation lines, both explicit and implicit - done?
70 * memory leak finding and plugging - done?
71 * more testing, especially quoting rules and redirection
72 * document how quoting rules not precisely followed for variable assignments
73 * maybe change map[] to use 2-bit entries
74 * (eventually) remove all the printf's
76 * This program is free software; you can redistribute it and/or modify
77 * it under the terms of the GNU General Public License as published by
78 * the Free Software Foundation; either version 2 of the License, or
79 * (at your option) any later version.
81 * This program is distributed in the hope that it will be useful,
82 * but WITHOUT ANY WARRANTY; without even the implied warranty of
83 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
84 * General Public License for more details.
86 * You should have received a copy of the GNU General Public License
87 * along with this program; if not, write to the Free Software
88 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
90 #include <ctype.h> /* isalpha, isdigit */
91 #include <unistd.h> /* getpid */
92 #include <stdlib.h> /* getenv, atoi */
93 #include <string.h> /* strchr */
94 #include <stdio.h> /* popen etc. */
95 #include <glob.h> /* glob, of course */
96 #include <stdarg.h> /* va_list */
99 #include <getopt.h> /* should be pretty obvious */
101 #include <sys/stat.h> /* ulimit */
102 #include <sys/types.h>
103 #include <sys/wait.h>
106 /* #include <dmalloc.h> */
107 /* #define DEBUG_SHELL */
113 #define applet_name "hush"
114 #include "standalone.h"
115 #define shell_main main
116 #undef BB_FEATURE_SH_FANCY_PROMPT
121 REDIRECT_OVERWRITE = 2,
127 /* The descrip member of this structure is only used to make debugging
129 struct {int mode; int default_fd; char *descrip;} redir_table[] = {
131 { O_RDONLY, 0, "<" },
132 { O_CREAT|O_TRUNC|O_WRONLY, 1, ">" },
133 { O_CREAT|O_APPEND|O_WRONLY, 1, ">>" },
134 { O_RDONLY, -1, "<<" },
145 /* might eventually control execution */
161 #define FLAG_END (1<<RES_NONE)
162 #define FLAG_IF (1<<RES_IF)
163 #define FLAG_THEN (1<<RES_THEN)
164 #define FLAG_ELIF (1<<RES_ELIF)
165 #define FLAG_ELSE (1<<RES_ELSE)
166 #define FLAG_FI (1<<RES_FI)
167 #define FLAG_FOR (1<<RES_FOR)
168 #define FLAG_WHILE (1<<RES_WHILE)
169 #define FLAG_UNTIL (1<<RES_UNTIL)
170 #define FLAG_DO (1<<RES_DO)
171 #define FLAG_DONE (1<<RES_DONE)
172 #define FLAG_START (1<<RES_XXXX)
174 /* This holds pointers to the various results of parsing */
176 struct child_prog *child;
177 struct pipe *list_head;
179 struct redir_struct *pending_redirect;
181 int old_flag; /* for figuring out valid reserved words */
182 struct p_context *stack;
183 /* How about quoting status? */
186 struct redir_struct {
187 redir_type type; /* type of redirection */
188 int fd; /* file descriptor being redirected */
189 int dup; /* -1, or file descriptor being duplicated */
190 struct redir_struct *next; /* pointer to the next redirect in the list */
191 glob_t word; /* *word.gl_pathv is the filename */
195 pid_t pid; /* 0 if exited */
196 char **argv; /* program name and arguments */
197 struct pipe *group; /* if non-NULL, first in group or subshell */
198 int subshell; /* flag, non-zero if group must be forked */
199 struct redir_struct *redirects; /* I/O redirections */
200 glob_t glob_result; /* result of parameter globbing */
201 int is_stopped; /* is the program currently running? */
202 struct pipe *family; /* pointer back to the child's parent pipe */
206 int jobid; /* job number */
207 int num_progs; /* total number of programs in job */
208 int running_progs; /* number of programs running */
209 char *text; /* name of job */
210 char *cmdbuf; /* buffer various argv's point into */
211 pid_t pgrp; /* process group ID for the job */
212 struct child_prog *progs; /* array of commands in pipe */
213 struct pipe *next; /* to track background commands */
214 int stopped_progs; /* number of programs alive, but stopped */
215 int job_context; /* bitmask defining current context */
216 pipe_style followup; /* PIPE_BG, PIPE_SEQ, PIPE_OR, PIPE_AND */
217 reserved_style r_mode; /* supports if, for, while, until */
222 struct close_me *next;
230 struct variables *next;
233 /* globals, connect us to the outside world
234 * the first three support $?, $#, and $1 */
236 unsigned int global_argc;
237 unsigned int last_return_code;
238 extern char **environ; /* This is in <unistd.h>, but protected with __USE_GNU */
240 /* Variables we export */
241 unsigned int shell_context; /* Used in cmdedit.c to reset the
242 * context when someone hits ^C */
244 /* "globals" within this file */
246 static char map[256];
247 static int fake_mode;
248 static int interactive;
249 static struct close_me *close_me_head;
250 static const char *cwd;
251 static struct pipe *job_list;
252 static unsigned int last_bg_pid;
253 static unsigned int last_jobid;
254 static unsigned int ctty;
257 struct variables shell_ver = { "HUSH_VERSION", "0.01", 1, 1, 0 };
258 struct variables *top_vars = &shell_ver;
261 #define B_CHUNK (100)
271 #define NULL_O_STRING {NULL,0,0,0,0}
272 /* used for initialization:
273 o_string foo = NULL_O_STRING; */
275 /* I can almost use ordinary FILE *. Is open_memstream() universally
276 * available? Where is it documented? */
283 int (*get) (struct in_str *);
284 int (*peek) (struct in_str *);
286 #define b_getch(input) ((input)->get(input))
287 #define b_peek(input) ((input)->peek(input))
289 #define JOB_STATUS_FORMAT "[%d] %-22s %.40s\n"
291 struct built_in_command {
292 char *cmd; /* name */
293 char *descr; /* description */
294 int (*function) (struct child_prog *); /* function ptr */
297 /* belongs in busybox.h */
298 static inline int max(int a, int b) {
302 /* This should be in utility.c */
304 static void debug_printf(const char *format, ...)
307 va_start(args, format);
308 vfprintf(stderr, format, args);
312 static inline void debug_printf(const char *format, ...) { }
314 #define final_printf debug_printf
316 static void __syntax(char *file, int line) {
317 error_msg("syntax error %s:%d", file, line);
319 #define syntax() __syntax(__FILE__, __LINE__)
321 /* Index of subroutines: */
322 /* function prototypes for builtins */
323 static int builtin_cd(struct child_prog *child);
324 static int builtin_env(struct child_prog *child);
325 static int builtin_exec(struct child_prog *child);
326 static int builtin_exit(struct child_prog *child);
327 static int builtin_export(struct child_prog *child);
328 static int builtin_fg_bg(struct child_prog *child);
329 static int builtin_help(struct child_prog *child);
330 static int builtin_jobs(struct child_prog *child);
331 static int builtin_pwd(struct child_prog *child);
332 static int builtin_read(struct child_prog *child);
333 static int builtin_set(struct child_prog *child);
334 static int builtin_shift(struct child_prog *child);
335 static int builtin_source(struct child_prog *child);
336 static int builtin_umask(struct child_prog *child);
337 static int builtin_unset(struct child_prog *child);
338 static int builtin_not_written(struct child_prog *child);
339 /* o_string manipulation: */
340 static int b_check_space(o_string *o, int len);
341 static int b_addchr(o_string *o, int ch);
342 static void b_reset(o_string *o);
343 static int b_addqchr(o_string *o, int ch, int quote);
344 static int b_adduint(o_string *o, unsigned int i);
345 /* in_str manipulations: */
346 static int static_get(struct in_str *i);
347 static int static_peek(struct in_str *i);
348 static int file_get(struct in_str *i);
349 static int file_peek(struct in_str *i);
350 static void setup_file_in_str(struct in_str *i, FILE *f);
351 static void setup_string_in_str(struct in_str *i, const char *s);
352 /* close_me manipulations: */
353 static void mark_open(int fd);
354 static void mark_closed(int fd);
355 static void close_all();
356 /* "run" the final data structures: */
357 static char *indenter(int i);
358 static int free_pipe_list(struct pipe *head, int indent);
359 static int free_pipe(struct pipe *pi, int indent);
360 /* really run the final data structures: */
361 static int setup_redirects(struct child_prog *prog, int squirrel[]);
362 static int run_list_real(struct pipe *pi);
363 static void pseudo_exec(struct child_prog *child) __attribute__ ((noreturn));
364 static int run_pipe_real(struct pipe *pi);
365 /* extended glob support: */
366 static int globhack(const char *src, int flags, glob_t *pglob);
367 static int glob_needed(const char *s);
368 static int xglob(o_string *dest, int flags, glob_t *pglob);
369 /* variable assignment: */
370 static int is_assignment(const char *s);
371 /* data structure manipulation: */
372 static int setup_redirect(struct p_context *ctx, int fd, redir_type style, struct in_str *input);
373 static void initialize_context(struct p_context *ctx);
374 static int done_word(o_string *dest, struct p_context *ctx);
375 static int done_command(struct p_context *ctx);
376 static int done_pipe(struct p_context *ctx, pipe_style type);
377 /* primary string parsing: */
378 static int redirect_dup_num(struct in_str *input);
379 static int redirect_opt_num(o_string *o);
380 static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end);
381 static int parse_group(o_string *dest, struct p_context *ctx, struct in_str *input, int ch);
382 static void lookup_param(o_string *dest, struct p_context *ctx, o_string *src);
383 static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input);
384 static int parse_string(o_string *dest, struct p_context *ctx, const char *src);
385 static int parse_stream(o_string *dest, struct p_context *ctx, struct in_str *input0, int end_trigger);
387 static int parse_stream_outer(struct in_str *inp);
388 static int parse_string_outer(const char *s);
389 static int parse_file_outer(FILE *f);
390 /* job management: */
391 static int checkjobs(struct pipe* fg_pipe);
392 static void insert_bg_job(struct pipe *pi);
393 static void remove_bg_job(struct pipe *pi);
394 /* local variable support */
395 static char *get_local_var(const char *var);
396 static void unset_local_var(const char *name);
397 static int set_local_var(const char *s, int flg_export);
398 static void sigchld_handler(int sig);
400 /* Table of built-in functions. They can be forked or not, depending on
401 * context: within pipes, they fork. As simple commands, they do not.
402 * When used in non-forking context, they can change global variables
403 * in the parent shell process. If forked, of course they can not.
404 * For example, 'unset foo | whatever' will parse and run, but foo will
405 * still be set at the end. */
406 static struct built_in_command bltins[] = {
407 {"bg", "Resume a job in the background", builtin_fg_bg},
408 {"break", "Exit for, while or until loop", builtin_not_written},
409 {"cd", "Change working directory", builtin_cd},
410 {"continue", "Continue for, while or until loop", builtin_not_written},
411 {"env", "Print all environment variables", builtin_env},
412 {"eval", "Construct and run shell command", builtin_not_written},
413 {"exec", "Exec command, replacing this shell with the exec'd process",
415 {"exit", "Exit from shell()", builtin_exit},
416 {"export", "Set environment variable", builtin_export},
417 {"fg", "Bring job into the foreground", builtin_fg_bg},
418 {"jobs", "Lists the active jobs", builtin_jobs},
419 {"pwd", "Print current directory", builtin_pwd},
420 {"read", "Input environment variable", builtin_read},
421 {"return", "Return from a function", builtin_not_written},
422 {"set", "Set/unset shell local variables", builtin_set},
423 {"shift", "Shift positional parameters", builtin_shift},
424 {"trap", "Trap signals", builtin_not_written},
425 {"ulimit","Controls resource limits", builtin_not_written},
426 {"umask","Sets file creation mask", builtin_umask},
427 {"unset", "Unset environment variable", builtin_unset},
428 {".", "Source-in and run commands in a file", builtin_source},
429 {"help", "List shell built-in commands", builtin_help},
433 static const char *set_cwd(void)
436 cwd = NULL; /* xgetcwd(arg) called free(arg) */
437 cwd = xgetcwd((char *)cwd);
444 /* built-in 'cd <path>' handler */
445 static int builtin_cd(struct child_prog *child)
448 if (child->argv[1] == NULL)
449 newdir = getenv("HOME");
451 newdir = child->argv[1];
453 printf("cd: %s: %s\n", newdir, strerror(errno));
460 /* built-in 'env' handler */
461 static int builtin_env(struct child_prog *dummy)
464 if (e == NULL) return EXIT_FAILURE;
471 /* built-in 'exec' handler */
472 static int builtin_exec(struct child_prog *child)
474 if (child->argv[1] == NULL)
475 return EXIT_SUCCESS; /* Really? */
481 /* built-in 'exit' handler */
482 static int builtin_exit(struct child_prog *child)
484 if (child->argv[1] == NULL)
485 exit(last_return_code);
486 exit (atoi(child->argv[1]));
489 /* built-in 'export VAR=value' handler */
490 static int builtin_export(struct child_prog *child)
493 char *name = child->argv[1];
496 return (builtin_env(child));
502 char *value = strchr(name, '=');
506 /* They are exporting something without an =VALUE */
508 value = get_local_var(name);
510 size_t ln = strlen(name);
512 tmp = realloc(name, ln+strlen(value)+2);
516 sprintf(tmp+ln, "=%s", value);
520 /* bash does not return an error when trying to export
521 * an undefined variable. Do likewise. */
527 perror_msg("export");
529 res = set_local_var(name, 1);
536 /* built-in 'fg' and 'bg' handler */
537 static int builtin_fg_bg(struct child_prog *child)
540 struct pipe *pi=NULL;
544 /* If they gave us no args, assume they want the last backgrounded task */
545 if (!child->argv[1]) {
546 for (pi = job_list; pi; pi = pi->next) {
547 if (pi->jobid == last_jobid) {
552 error_msg("%s: no current job", child->argv[0]);
556 if (sscanf(child->argv[1], "%%%d", &jobnum) != 1) {
557 error_msg("%s: bad argument '%s'", child->argv[0], child->argv[1]);
560 for (pi = job_list; pi; pi = pi->next) {
561 if (pi->jobid == jobnum) {
566 error_msg("%s: %d: no such job", child->argv[0], jobnum);
571 if (*child->argv[0] == 'f') {
572 /* Make this job the foreground job */
573 signal(SIGTTOU, SIG_IGN);
574 /* suppress messages when run from /linuxrc mag@sysgo.de */
575 if (tcsetpgrp(ctty, pi->pgrp) && errno != ENOTTY)
576 perror_msg("tcsetpgrp-1");
577 signal(SIGTTOU, SIG_DFL);
580 /* Restart the processes in the job */
581 for (i = 0; i < pi->num_progs; i++)
582 pi->progs[i].is_stopped = 0;
584 kill(-pi->pgrp, SIGCONT);
586 pi->stopped_progs = 0;
590 /* built-in 'help' handler */
591 static int builtin_help(struct child_prog *dummy)
593 struct built_in_command *x;
595 printf("\nBuilt-in commands:\n");
596 printf("-------------------\n");
597 for (x = bltins; x->cmd; x++) {
600 printf("%s\t%s\n", x->cmd, x->descr);
606 /* built-in 'jobs' handler */
607 static int builtin_jobs(struct child_prog *child)
612 for (job = job_list; job; job = job->next) {
613 if (job->running_progs == job->stopped_progs)
614 status_string = "Stopped";
616 status_string = "Running";
618 printf(JOB_STATUS_FORMAT, job->jobid, status_string, job->text);
624 /* built-in 'pwd' handler */
625 static int builtin_pwd(struct child_prog *dummy)
631 /* built-in 'read VAR' handler */
632 static int builtin_read(struct child_prog *child)
636 if (child->argv[1]) {
640 string[0] = 0; /* In case stdin has only EOF */
642 fgets(string, sizeof(string), stdin);
644 var = malloc(strlen(child->argv[1])+strlen(string)+2);
646 sprintf(var, "%s=%s", child->argv[1], string);
647 res = set_local_var(var, 0);
651 fprintf(stderr, "read: %m\n");
652 free(var); /* So not move up to avoid breaking errno */
655 do res=getchar(); while(res!='\n' && res!=EOF);
660 /* built-in 'set VAR=value' handler */
661 static int builtin_set(struct child_prog *child)
663 char *temp = child->argv[1];
667 for(e = top_vars; e; e=e->next)
668 printf("%s=%s\n", e->name, e->value);
670 set_local_var(temp, 0);
676 /* Built-in 'shift' handler */
677 static int builtin_shift(struct child_prog *child)
680 if (child->argv[1]) {
681 n=atoi(child->argv[1]);
683 if (n>=0 && n<global_argc) {
684 /* XXX This probably breaks $0 */
693 /* Built-in '.' handler (read-in and execute commands from file) */
694 static int builtin_source(struct child_prog *child)
699 if (child->argv[1] == NULL)
702 /* XXX search through $PATH is missing */
703 input = fopen(child->argv[1], "r");
705 error_msg("Couldn't open file '%s'", child->argv[1]);
709 /* Now run the file */
710 /* XXX argv and argc are broken; need to save old global_argv
711 * (pointer only is OK!) on this stack frame,
712 * set global_argv=child->argv+1, recurse, and restore. */
713 mark_open(fileno(input));
714 status = parse_file_outer(input);
715 mark_closed(fileno(input));
720 static int builtin_umask(struct child_prog *child)
723 const char *arg = child->argv[1];
726 new_umask=strtoul(arg, &end, 8);
727 if (*end!='\0' || end == arg) {
731 printf("%.3o\n", (unsigned int) (new_umask=umask(0)));
737 /* built-in 'unset VAR' handler */
738 static int builtin_unset(struct child_prog *child)
740 /* bash returned already true */
741 unset_local_var(child->argv[1]);
745 static int builtin_not_written(struct child_prog *child)
747 printf("builtin_%s not written\n",child->argv[0]);
751 static int b_check_space(o_string *o, int len)
753 /* It would be easy to drop a more restrictive policy
754 * in here, such as setting a maximum string length */
755 if (o->length + len > o->maxlen) {
756 char *old_data = o->data;
757 /* assert (data == NULL || o->maxlen != 0); */
758 o->maxlen += max(2*len, B_CHUNK);
759 o->data = realloc(o->data, 1 + o->maxlen);
760 if (o->data == NULL) {
764 return o->data == NULL;
767 static int b_addchr(o_string *o, int ch)
769 debug_printf("b_addchr: %c %d %p\n", ch, o->length, o);
770 if (b_check_space(o, 1)) return B_NOSPAC;
771 o->data[o->length] = ch;
773 o->data[o->length] = '\0';
777 static void b_reset(o_string *o)
781 if (o->data != NULL) *o->data = '\0';
784 static void b_free(o_string *o)
787 if (o->data != NULL) free(o->data);
792 /* My analysis of quoting semantics tells me that state information
793 * is associated with a destination, not a source.
795 static int b_addqchr(o_string *o, int ch, int quote)
797 if (quote && strchr("*?[\\",ch)) {
799 rc = b_addchr(o, '\\');
802 return b_addchr(o, ch);
805 /* belongs in utility.c */
806 char *simple_itoa(unsigned int i)
808 /* 21 digits plus null terminator, good for 64-bit or smaller ints */
809 static char local[22];
810 char *p = &local[21];
819 static int b_adduint(o_string *o, unsigned int i)
822 char *p = simple_itoa(i);
823 /* no escape checking necessary */
824 do r=b_addchr(o, *p++); while (r==0 && *p);
828 static int static_get(struct in_str *i)
831 if (ch=='\0') return EOF;
835 static int static_peek(struct in_str *i)
840 static inline void cmdedit_set_initial_prompt(void)
842 #ifndef BB_FEATURE_SH_FANCY_PROMPT
851 static inline void setup_prompt_string(int promptmode, char **prompt_str)
853 debug_printf("setup_prompt_string %d ",promptmode);
854 #ifndef BB_FEATURE_SH_FANCY_PROMPT
855 /* Set up the prompt */
856 if (promptmode == 1) {
859 PS1=xmalloc(strlen(cwd)+4);
860 sprintf(PS1, "%s %s", cwd, ( geteuid() != 0 ) ? "$ ":"# ");
866 *prompt_str = (promptmode==0)? PS1 : PS2;
868 debug_printf("result %s\n",*prompt_str);
871 static void get_user_input(struct in_str *i)
874 static char the_command[BUFSIZ];
876 setup_prompt_string(i->promptmode, &prompt_str);
877 #ifdef BB_FEATURE_COMMAND_EDITING
879 ** enable command line editing only while a command line
880 ** is actually being read; otherwise, we'll end up bequeathing
881 ** atexit() handlers and other unwanted stuff to our
882 ** child processes (rob@sysgo.de)
884 cmdedit_read_input(prompt_str, the_command);
887 fputs(prompt_str, stdout);
889 the_command[0]=fgetc(i->file);
896 /* This is the magic location that prints prompts
897 * and gets data back from the user */
898 static int file_get(struct in_str *i)
903 /* If there is data waiting, eat it up */
907 /* need to double check i->file because we might be doing something
908 * more complicated by now, like sourcing or substituting. */
909 if (i->__promptme && interactive && i->file == stdin) {
910 while(! i->p || (interactive && strlen(i->p)==0) ) {
922 debug_printf("b_getch: got a %d\n", ch);
924 if (ch == '\n') i->__promptme=1;
928 /* All the callers guarantee this routine will never be
929 * used right after a newline, so prompting is not needed.
931 static int file_peek(struct in_str *i)
936 i->peek_buf[0] = fgetc(i->file);
937 i->peek_buf[1] = '\0';
939 debug_printf("b_peek: got a %d\n", *i->p);
944 static void setup_file_in_str(struct in_str *i, FILE *f)
954 static void setup_string_in_str(struct in_str *i, const char *s)
956 i->peek = static_peek;
963 static void mark_open(int fd)
965 struct close_me *new = xmalloc(sizeof(struct close_me));
967 new->next = close_me_head;
971 static void mark_closed(int fd)
973 struct close_me *tmp;
974 if (close_me_head == NULL || close_me_head->fd != fd)
975 error_msg_and_die("corrupt close_me");
977 close_me_head = close_me_head->next;
981 static void close_all()
984 for (c=close_me_head; c; c=c->next) {
987 close_me_head = NULL;
990 /* squirrel != NULL means we squirrel away copies of stdin, stdout,
991 * and stderr if they are redirected. */
992 static int setup_redirects(struct child_prog *prog, int squirrel[])
995 struct redir_struct *redir;
997 for (redir=prog->redirects; redir; redir=redir->next) {
998 if (redir->dup == -1 && redir->word.gl_pathv == NULL) {
999 /* something went wrong in the parse. Pretend it didn't happen */
1002 if (redir->dup == -1) {
1003 mode=redir_table[redir->type].mode;
1004 openfd = open(redir->word.gl_pathv[0], mode, 0666);
1006 /* this could get lost if stderr has been redirected, but
1007 bash and ash both lose it as well (though zsh doesn't!) */
1008 perror_msg("error opening %s", redir->word.gl_pathv[0]);
1012 openfd = redir->dup;
1015 if (openfd != redir->fd) {
1016 if (squirrel && redir->fd < 3) {
1017 squirrel[redir->fd] = dup(redir->fd);
1022 dup2(openfd, redir->fd);
1023 if (redir->dup == -1)
1031 static void restore_redirects(int squirrel[])
1034 for (i=0; i<3; i++) {
1037 /* No error checking. I sure wouldn't know what
1038 * to do with an error if I found one! */
1046 /* XXX no exit() here. If you don't exec, use _exit instead.
1047 * The at_exit handlers apparently confuse the calling process,
1048 * in particular stdin handling. Not sure why? */
1049 static void pseudo_exec(struct child_prog *child)
1052 struct built_in_command *x;
1054 for (i=0; is_assignment(child->argv[i]); i++) {
1055 debug_printf("pid %d environment modification: %s\n",getpid(),child->argv[i]);
1056 putenv(strdup(child->argv[i]));
1058 child->argv+=i; /* XXX this hack isn't so horrible, since we are about
1059 to exit, and therefore don't need to keep data
1060 structures consistent for free() use. */
1061 /* If a variable is assigned in a forest, and nobody listens,
1062 * was it ever really set?
1064 if (child->argv[0] == NULL) {
1065 _exit(EXIT_SUCCESS);
1069 * Check if the command matches any of the builtins.
1070 * Depending on context, this might be redundant. But it's
1071 * easier to waste a few CPU cycles than it is to figure out
1072 * if this is one of those cases.
1074 for (x = bltins; x->cmd; x++) {
1075 if (strcmp(child->argv[0], x->cmd) == 0 ) {
1076 debug_printf("builtin exec %s\n", child->argv[0]);
1077 rcode = x->function(child);
1083 /* Check if the command matches any busybox internal commands
1085 * FIXME: This feature is not 100% safe, since
1086 * BusyBox is not fully reentrant, so we have no guarantee the things
1087 * from the .bss are still zeroed, or that things from .data are still
1088 * at their defaults. We could exec ourself from /proc/self/exe, but I
1089 * really dislike relying on /proc for things. We could exec ourself
1090 * from global_argv[0], but if we are in a chroot, we may not be able
1091 * to find ourself... */
1092 #ifdef BB_FEATURE_SH_STANDALONE_SHELL
1095 char** argv_l=child->argv;
1096 char *name = child->argv[0];
1098 #ifdef BB_FEATURE_SH_APPLETS_ALWAYS_WIN
1099 /* Following discussions from November 2000 on the busybox mailing
1100 * list, the default configuration, (without
1101 * get_last_path_component()) lets the user force use of an
1102 * external command by specifying the full (with slashes) filename.
1103 * If you enable BB_FEATURE_SH_APPLETS_ALWAYS_WIN, then applets
1104 * _aways_ override external commands, so if you want to run
1105 * /bin/cat, it will use BusyBox cat even if /bin/cat exists on the
1106 * filesystem and is _not_ busybox. Some systems may want this,
1108 name = get_last_path_component(name);
1110 /* Count argc for use in a second... */
1111 for(argc_l=0;*argv_l!=NULL; argv_l++, argc_l++);
1113 debug_printf("running applet %s\n", name);
1114 run_applet_by_name(name, argc_l, child->argv);
1117 debug_printf("exec of %s\n",child->argv[0]);
1118 execvp(child->argv[0],child->argv);
1119 perror_msg("couldn't exec: %s",child->argv[0]);
1121 } else if (child->group) {
1122 debug_printf("runtime nesting to group\n");
1123 interactive=0; /* crucial!!!! */
1124 rcode = run_list_real(child->group);
1125 /* OK to leak memory by not calling free_pipe_list,
1126 * since this process is about to exit */
1129 /* Can happen. See what bash does with ">foo" by itself. */
1130 debug_printf("trying to pseudo_exec null command\n");
1131 _exit(EXIT_SUCCESS);
1135 static void insert_bg_job(struct pipe *pi)
1137 struct pipe *thejob;
1139 /* Linear search for the ID of the job to use */
1141 for (thejob = job_list; thejob; thejob = thejob->next)
1142 if (thejob->jobid >= pi->jobid)
1143 pi->jobid = thejob->jobid + 1;
1145 /* add thejob to the list of running jobs */
1147 thejob = job_list = xmalloc(sizeof(*thejob));
1149 for (thejob = job_list; thejob->next; thejob = thejob->next) /* nothing */;
1150 thejob->next = xmalloc(sizeof(*thejob));
1151 thejob = thejob->next;
1154 /* physically copy the struct job */
1155 memcpy(thejob, pi, sizeof(struct pipe));
1156 thejob->next = NULL;
1157 thejob->running_progs = thejob->num_progs;
1158 thejob->stopped_progs = 0;
1159 thejob->text = xmalloc(BUFSIZ); /* cmdedit buffer size */
1161 //if (pi->progs[0] && pi->progs[0].argv && pi->progs[0].argv[0])
1163 char *bar=thejob->text;
1164 char **foo=pi->progs[0].argv;
1165 while(foo && *foo) {
1166 bar += sprintf(bar, "%s ", *foo++);
1170 /* we don't wait for background thejobs to return -- append it
1171 to the list of backgrounded thejobs and leave it alone */
1172 printf("[%d] %d\n", thejob->jobid, thejob->progs[0].pid);
1173 last_bg_pid = thejob->progs[0].pid;
1174 last_jobid = thejob->jobid;
1177 /* remove a backgrounded job */
1178 static void remove_bg_job(struct pipe *pi)
1180 struct pipe *prev_pipe;
1182 if (pi == job_list) {
1183 job_list = pi->next;
1185 prev_pipe = job_list;
1186 while (prev_pipe->next != pi)
1187 prev_pipe = prev_pipe->next;
1188 prev_pipe->next = pi->next;
1190 pi->stopped_progs = 0;
1195 /* Checks to see if any processes have exited -- if they
1196 have, figure out why and see if a job has completed */
1197 static int checkjobs(struct pipe* fg_pipe)
1205 attributes = WUNTRACED;
1206 if (fg_pipe==NULL) {
1207 attributes |= WNOHANG;
1210 while ((childpid = waitpid(-1, &status, attributes)) > 0) {
1213 for (i=0; i < fg_pipe->num_progs; i++) {
1214 if (fg_pipe->progs[i].pid == childpid) {
1215 if (i==fg_pipe->num_progs-1)
1216 rcode=WEXITSTATUS(status);
1217 (fg_pipe->num_progs)--;
1223 for (pi = job_list; pi; pi = pi->next) {
1225 while (prognum < pi->num_progs && pi->progs[prognum].pid != childpid) {
1228 if (prognum < pi->num_progs)
1233 debug_printf("checkjobs: pid %d was not in our list!\n", childpid);
1237 if (WIFEXITED(status) || WIFSIGNALED(status)) {
1239 pi->running_progs--;
1240 pi->progs[prognum].pid = 0;
1242 if (!pi->running_progs) {
1243 printf(JOB_STATUS_FORMAT, pi->jobid, "Done", pi->text);
1248 pi->stopped_progs++;
1249 pi->progs[prognum].is_stopped = 1;
1252 /* Printing this stuff is a pain, since it tends to
1253 * overwrite the prompt an inconveinient moments. So
1255 if (pi->stopped_progs == pi->num_progs) {
1256 printf("\n"JOB_STATUS_FORMAT, pi->jobid, "Stopped", pi->text);
1262 if (childpid == -1 && errno != ECHILD)
1263 perror_msg("waitpid");
1265 /* move the shell to the foreground */
1266 if (interactive && tcsetpgrp(ctty, getpgid(0)))
1267 perror_msg("tcsetpgrp-2");
1271 /* Figure out our controlling tty, checking in order stderr,
1272 * stdin, and stdout. If check_pgrp is set, also check that
1273 * we belong to the foreground process group associated with
1274 * that tty. The value of ctty is needed in order to call
1275 * tcsetpgrp(ctty, ...); */
1276 void controlling_tty(int check_pgrp)
1280 if ((curpgrp = tcgetpgrp(ctty = 2)) < 0
1281 && (curpgrp = tcgetpgrp(ctty = 0)) < 0
1282 && (curpgrp = tcgetpgrp(ctty = 1)) < 0)
1285 if (check_pgrp && curpgrp != getpgid(0))
1295 /* run_pipe_real() starts all the jobs, but doesn't wait for anything
1296 * to finish. See checkjobs().
1298 * return code is normally -1, when the caller has to wait for children
1299 * to finish to determine the exit status of the pipe. If the pipe
1300 * is a simple builtin command, however, the action is done by the
1301 * time run_pipe_real returns, and the exit code is provided as the
1304 * The input of the pipe is always stdin, the output is always
1305 * stdout. The outpipe[] mechanism in BusyBox-0.48 lash is bogus,
1306 * because it tries to avoid running the command substitution in
1307 * subshell, when that is in fact necessary. The subshell process
1308 * now has its stdout directed to the input of the appropriate pipe,
1309 * so this routine is noticeably simpler.
1311 static int run_pipe_real(struct pipe *pi)
1314 int nextin, nextout;
1315 int pipefds[2]; /* pipefds[0] is for reading */
1316 struct child_prog *child;
1317 struct built_in_command *x;
1322 /* Check if this is a simple builtin (not part of a pipe).
1323 * Builtins within pipes have to fork anyway, and are handled in
1324 * pseudo_exec. "echo foo | read bar" doesn't work on bash, either.
1326 if (pi->num_progs == 1) child = & (pi->progs[0]);
1327 if (pi->num_progs == 1 && child->group && child->subshell == 0) {
1328 int squirrel[] = {-1, -1, -1};
1330 debug_printf("non-subshell grouping\n");
1331 setup_redirects(child, squirrel);
1332 /* XXX could we merge code with following builtin case,
1333 * by creating a pseudo builtin that calls run_list_real? */
1334 rcode = run_list_real(child->group);
1335 restore_redirects(squirrel);
1337 } else if (pi->num_progs == 1 && pi->progs[0].argv != NULL) {
1338 for (i=0; is_assignment(child->argv[i]); i++) { /* nothing */ }
1339 if (i!=0 && child->argv[i]==NULL) {
1340 /* assignments, but no command: set the local environment */
1341 for (i=0; child->argv[i]!=NULL; i++) {
1343 /* Ok, this case is tricky. We have to decide if this is a
1344 * local variable, or an already exported variable. If it is
1345 * already exported, we have to export the new value. If it is
1346 * not exported, we need only set this as a local variable.
1347 * This junk is all to decide whether or not to export this
1351 name = xstrdup(child->argv[i]);
1352 debug_printf("Local environment set: %s\n", name);
1353 value = strchr(name, '=');
1356 if ( get_local_var(name)) {
1360 set_local_var(child->argv[i], export_me);
1362 return EXIT_SUCCESS; /* don't worry about errors in set_local_var() yet */
1364 for (x = bltins; x->cmd; x++) {
1365 if (strcmp(child->argv[i], x->cmd) == 0 ) {
1366 int squirrel[] = {-1, -1, -1};
1368 if (x->function == builtin_exec && child->argv[i+1]==NULL) {
1369 debug_printf("magic exec\n");
1370 setup_redirects(child,NULL);
1371 return EXIT_SUCCESS;
1373 debug_printf("builtin inline %s\n", child->argv[0]);
1374 /* XXX setup_redirects acts on file descriptors, not FILEs.
1375 * This is perfect for work that comes after exec().
1376 * Is it really safe for inline use? Experimentally,
1377 * things seem to work with glibc. */
1378 setup_redirects(child, squirrel);
1379 for (i=0; is_assignment(child->argv[i]); i++) {
1380 putenv(strdup(child->argv[i]));
1382 child->argv+=i; /* XXX horrible hack */
1383 rcode = x->function(child);
1384 child->argv-=i; /* XXX restore hack so free() can work right */
1385 restore_redirects(squirrel);
1391 for (i = 0; i < pi->num_progs; i++) {
1392 child = & (pi->progs[i]);
1394 /* pipes are inserted between pairs of commands */
1395 if ((i + 1) < pi->num_progs) {
1396 if (pipe(pipefds)<0) perror_msg_and_die("pipe");
1397 nextout = pipefds[1];
1403 /* XXX test for failed fork()? */
1404 if (!(child->pid = fork())) {
1405 signal(SIGTTOU, SIG_DFL);
1417 if (pipefds[0]!=-1) {
1418 close(pipefds[0]); /* opposite end of our output pipe */
1421 /* Like bash, explicit redirects override pipes,
1422 * and the pipe fd is available for dup'ing. */
1423 setup_redirects(child,NULL);
1425 if (interactive && pi->followup!=PIPE_BG) {
1426 /* If we (the child) win the race, put ourselves in the process
1427 * group whose leader is the first process in this pipe. */
1429 pi->pgrp = getpid();
1431 if (setpgid(0, pi->pgrp) == 0) {
1432 signal(SIGTTOU, SIG_IGN);
1433 tcsetpgrp(2, pi->pgrp);
1434 signal(SIGTTOU, SIG_DFL);
1442 /* put our child in the process group whose leader is the
1443 first process in this pipe */
1445 pi->pgrp = child->pid;
1447 /* Don't check for errors. The child may be dead already,
1448 * in which case setpgid returns error code EACCES. */
1449 setpgid(child->pid, pi->pgrp);
1456 /* If there isn't another process, nextin is garbage
1457 but it doesn't matter */
1458 nextin = pipefds[0];
1463 static int run_list_real(struct pipe *pi)
1466 int if_code=0, next_if_code=0; /* need double-buffer to handle elif */
1467 reserved_style rmode, skip_more_in_this_rmode=RES_XXXX;
1468 for (;pi;pi=pi->next) {
1470 debug_printf("rmode=%d if_code=%d next_if_code=%d skip_more=%d\n", rmode, if_code, next_if_code, skip_more_in_this_rmode);
1471 if (rmode == skip_more_in_this_rmode) continue;
1472 skip_more_in_this_rmode = RES_XXXX;
1473 if (rmode == RES_THEN || rmode == RES_ELSE) if_code = next_if_code;
1474 if (rmode == RES_THEN && if_code) continue;
1475 if (rmode == RES_ELSE && !if_code) continue;
1476 if (rmode == RES_ELIF && !if_code) continue;
1477 if (pi->num_progs == 0) continue;
1478 rcode = run_pipe_real(pi);
1479 debug_printf("run_pipe_real returned %d\n",rcode);
1481 /* We only ran a builtin: rcode was set by the return value
1482 * of run_pipe_real(), and we don't need to wait for anything. */
1483 } else if (pi->followup==PIPE_BG) {
1484 /* XXX check bash's behavior with nontrivial pipes */
1485 /* XXX compute jobid */
1486 /* XXX what does bash do with attempts to background builtins? */
1488 rcode = EXIT_SUCCESS;
1491 /* move the new process group into the foreground */
1492 if (tcsetpgrp(ctty, pi->pgrp) && errno != ENOTTY)
1493 perror_msg("tcsetpgrp-3");
1494 rcode = checkjobs(pi);
1495 /* move the shell to the foreground */
1496 if (tcsetpgrp(ctty, getpgid(0)) && errno != ENOTTY)
1497 perror_msg("tcsetpgrp-4");
1499 rcode = checkjobs(pi);
1501 debug_printf("checkjobs returned %d\n",rcode);
1503 last_return_code=rcode;
1504 if ( rmode == RES_IF || rmode == RES_ELIF )
1505 next_if_code=rcode; /* can be overwritten a number of times */
1506 if ( (rcode==EXIT_SUCCESS && pi->followup==PIPE_OR) ||
1507 (rcode!=EXIT_SUCCESS && pi->followup==PIPE_AND) )
1508 skip_more_in_this_rmode=rmode;
1514 /* broken, of course, but OK for testing */
1515 static char *indenter(int i)
1517 static char blanks[]=" ";
1518 return &blanks[sizeof(blanks)-i-1];
1521 /* return code is the exit status of the pipe */
1522 static int free_pipe(struct pipe *pi, int indent)
1525 struct child_prog *child;
1526 struct redir_struct *r, *rnext;
1527 int a, i, ret_code=0;
1528 char *ind = indenter(indent);
1530 if (pi->stopped_progs > 0)
1532 final_printf("%s run pipe: (pid %d)\n",ind,getpid());
1533 for (i=0; i<pi->num_progs; i++) {
1534 child = &pi->progs[i];
1535 final_printf("%s command %d:\n",ind,i);
1537 for (a=0,p=child->argv; *p; a++,p++) {
1538 final_printf("%s argv[%d] = %s\n",ind,a,*p);
1540 globfree(&child->glob_result);
1542 } else if (child->group) {
1543 final_printf("%s begin group (subshell:%d)\n",ind, child->subshell);
1544 ret_code = free_pipe_list(child->group,indent+3);
1545 final_printf("%s end group\n",ind);
1547 final_printf("%s (nil)\n",ind);
1549 for (r=child->redirects; r; r=rnext) {
1550 final_printf("%s redirect %d%s", ind, r->fd, redir_table[r->type].descrip);
1552 /* guard against the case >$FOO, where foo is unset or blank */
1553 if (r->word.gl_pathv) {
1554 final_printf(" %s\n", *r->word.gl_pathv);
1558 final_printf("&%d\n", r->dup);
1563 child->redirects=NULL;
1565 free(pi->progs); /* children are an array, they get freed all at once */
1570 static int free_pipe_list(struct pipe *head, int indent)
1572 int rcode=0; /* if list has no members */
1573 struct pipe *pi, *next;
1574 char *ind = indenter(indent);
1575 for (pi=head; pi; pi=next) {
1576 final_printf("%s pipe reserved mode %d\n", ind, pi->r_mode);
1577 rcode = free_pipe(pi, indent);
1578 final_printf("%s pipe followup code %d\n", ind, pi->followup);
1586 /* Select which version we will use */
1587 static int run_list(struct pipe *pi)
1591 rcode = run_list_real(pi);
1593 /* free_pipe_list has the side effect of clearing memory
1594 * In the long run that function can be merged with run_list_real,
1595 * but doing that now would hobble the debugging effort. */
1596 free_pipe_list(pi,0);
1600 /* The API for glob is arguably broken. This routine pushes a non-matching
1601 * string into the output structure, removing non-backslashed backslashes.
1602 * If someone can prove me wrong, by performing this function within the
1603 * original glob(3) api, feel free to rewrite this routine into oblivion.
1604 * Return code (0 vs. GLOB_NOSPACE) matches glob(3).
1605 * XXX broken if the last character is '\\', check that before calling.
1607 static int globhack(const char *src, int flags, glob_t *pglob)
1612 for (cnt=1, s=src; s && *s; s++) {
1613 if (*s == '\\') s++;
1617 if (!dest) return GLOB_NOSPACE;
1618 if (!(flags & GLOB_APPEND)) {
1619 pglob->gl_pathv=NULL;
1624 pathc = ++pglob->gl_pathc;
1625 pglob->gl_pathv = realloc(pglob->gl_pathv, (pathc+1)*sizeof(*pglob->gl_pathv));
1626 if (pglob->gl_pathv == NULL) return GLOB_NOSPACE;
1627 pglob->gl_pathv[pathc-1]=dest;
1628 pglob->gl_pathv[pathc]=NULL;
1629 for (s=src; s && *s; s++, dest++) {
1630 if (*s == '\\') s++;
1637 /* XXX broken if the last character is '\\', check that before calling */
1638 static int glob_needed(const char *s)
1641 if (*s == '\\') s++;
1642 if (strchr("*[?",*s)) return 1;
1648 static void globprint(glob_t *pglob)
1651 debug_printf("glob_t at %p:\n", pglob);
1652 debug_printf(" gl_pathc=%d gl_pathv=%p gl_offs=%d gl_flags=%d\n",
1653 pglob->gl_pathc, pglob->gl_pathv, pglob->gl_offs, pglob->gl_flags);
1654 for (i=0; i<pglob->gl_pathc; i++)
1655 debug_printf("pglob->gl_pathv[%d] = %p = %s\n", i,
1656 pglob->gl_pathv[i], pglob->gl_pathv[i]);
1660 static int xglob(o_string *dest, int flags, glob_t *pglob)
1664 /* short-circuit for null word */
1665 /* we can code this better when the debug_printf's are gone */
1666 if (dest->length == 0) {
1667 if (dest->nonnull) {
1668 /* bash man page calls this an "explicit" null */
1669 gr = globhack(dest->data, flags, pglob);
1670 debug_printf("globhack returned %d\n",gr);
1674 } else if (glob_needed(dest->data)) {
1675 gr = glob(dest->data, flags, NULL, pglob);
1676 debug_printf("glob returned %d\n",gr);
1677 if (gr == GLOB_NOMATCH) {
1678 /* quote removal, or more accurately, backslash removal */
1679 gr = globhack(dest->data, flags, pglob);
1680 debug_printf("globhack returned %d\n",gr);
1683 gr = globhack(dest->data, flags, pglob);
1684 debug_printf("globhack returned %d\n",gr);
1686 if (gr == GLOB_NOSPACE)
1687 error_msg_and_die("out of memory during glob");
1688 if (gr != 0) { /* GLOB_ABORTED ? */
1689 error_msg("glob(3) error %d",gr);
1691 /* globprint(glob_target); */
1695 /* This is used to get/check local shell variables */
1696 static char *get_local_var(const char *s)
1698 struct variables *cur;
1702 for (cur = top_vars; cur; cur=cur->next)
1703 if(strcmp(cur->name, s)==0)
1708 /* This is used to set local shell variables
1709 flg_export==0 if only local (not exporting) variable
1710 flg_export==1 if "new" exporting environ
1711 flg_export>1 if current startup environ (not call putenv()) */
1712 static int set_local_var(const char *s, int flg_export)
1716 struct variables *cur;
1720 /* Assume when we enter this function that we are already in
1721 * NAME=VALUE format. So the first order of business is to
1722 * split 's' on the '=' into 'name' and 'value' */
1723 value = strchr(name, '=');
1724 if (value==0 && ++value==0) {
1730 for(cur = top_vars; cur; cur = cur->next) {
1731 if(strcmp(cur->name, name)==0)
1736 if(strcmp(cur->value, value)==0) {
1737 if(flg_export>0 && cur->flg_export==0)
1738 cur->flg_export=flg_export;
1742 if(cur->flg_read_only) {
1743 error_msg("%s: readonly variable", name);
1746 if(flg_export>0 || cur->flg_export>1)
1750 cur->value = strdup(value);
1754 cur = malloc(sizeof(struct variables));
1758 cur->name = strdup(name);
1759 if(cur->name == 0) {
1763 struct variables *bottom = top_vars;
1764 cur->value = strdup(value);
1766 cur->flg_export = flg_export;
1767 cur->flg_read_only = 0;
1768 while(bottom->next) bottom=bottom->next;
1774 if(result==0 && cur->flg_export==1) {
1776 result = putenv(name);
1779 if(result>0) /* equivalent to previous set */
1785 static void unset_local_var(const char *name)
1787 struct variables *cur;
1790 for (cur = top_vars; cur; cur=cur->next) {
1791 if(strcmp(cur->name, name)==0)
1795 struct variables *next = top_vars;
1796 if(cur->flg_read_only) {
1797 error_msg("%s: readonly variable", name);
1801 unsetenv(cur->name);
1804 while (next->next != cur)
1806 next->next = cur->next;
1813 static int is_assignment(const char *s)
1815 if (s==NULL || !isalpha(*s)) return 0;
1817 while(isalnum(*s) || *s=='_') ++s;
1821 /* the src parameter allows us to peek forward to a possible &n syntax
1822 * for file descriptor duplication, e.g., "2>&1".
1823 * Return code is 0 normally, 1 if a syntax error is detected in src.
1824 * Resource errors (in xmalloc) cause the process to exit */
1825 static int setup_redirect(struct p_context *ctx, int fd, redir_type style,
1826 struct in_str *input)
1828 struct child_prog *child=ctx->child;
1829 struct redir_struct *redir = child->redirects;
1830 struct redir_struct *last_redir=NULL;
1832 /* Create a new redir_struct and drop it onto the end of the linked list */
1837 redir = xmalloc(sizeof(struct redir_struct));
1839 redir->word.gl_pathv=NULL;
1841 last_redir->next=redir;
1843 child->redirects=redir;
1847 redir->fd= (fd==-1) ? redir_table[style].default_fd : fd ;
1849 debug_printf("Redirect type %d%s\n", redir->fd, redir_table[style].descrip);
1851 /* Check for a '2>&1' type redirect */
1852 redir->dup = redirect_dup_num(input);
1853 if (redir->dup == -2) return 1; /* syntax error */
1854 if (redir->dup != -1) {
1855 /* Erik had a check here that the file descriptor in question
1856 * is legit; I postpone that to "run time"
1857 * A "-" representation of "close me" shows up as a -3 here */
1858 debug_printf("Duplicating redirect '%d>&%d'\n", redir->fd, redir->dup);
1860 /* We do _not_ try to open the file that src points to,
1861 * since we need to return and let src be expanded first.
1862 * Set ctx->pending_redirect, so we know what to do at the
1863 * end of the next parsed word.
1865 ctx->pending_redirect = redir;
1870 struct pipe *new_pipe(void) {
1872 pi = xmalloc(sizeof(struct pipe));
1876 pi->followup = 0; /* invalid */
1880 static void initialize_context(struct p_context *ctx)
1883 ctx->pending_redirect=NULL;
1885 ctx->list_head=new_pipe();
1886 ctx->pipe=ctx->list_head;
1889 done_command(ctx); /* creates the memory for working child */
1892 /* normal return is 0
1893 * if a reserved word is found, and processed, return 1
1894 * should handle if, then, elif, else, fi, for, while, until, do, done.
1895 * case, function, and select are obnoxious, save those for later.
1897 int reserved_word(o_string *dest, struct p_context *ctx)
1899 struct reserved_combo {
1904 /* Mostly a list of accepted follow-up reserved words.
1905 * FLAG_END means we are done with the sequence, and are ready
1906 * to turn the compound list into a command.
1907 * FLAG_START means the word must start a new compound list.
1909 static struct reserved_combo reserved_list[] = {
1910 { "if", RES_IF, FLAG_THEN | FLAG_START },
1911 { "then", RES_THEN, FLAG_ELIF | FLAG_ELSE | FLAG_FI },
1912 { "elif", RES_ELIF, FLAG_THEN },
1913 { "else", RES_ELSE, FLAG_FI },
1914 { "fi", RES_FI, FLAG_END },
1915 { "for", RES_FOR, FLAG_DO | FLAG_START },
1916 { "while", RES_WHILE, FLAG_DO | FLAG_START },
1917 { "until", RES_UNTIL, FLAG_DO | FLAG_START },
1918 { "do", RES_DO, FLAG_DONE },
1919 { "done", RES_DONE, FLAG_END }
1921 struct reserved_combo *r;
1922 for (r=reserved_list;
1923 #define NRES sizeof(reserved_list)/sizeof(struct reserved_combo)
1924 r<reserved_list+NRES; r++) {
1925 if (strcmp(dest->data, r->literal) == 0) {
1926 debug_printf("found reserved word %s, code %d\n",r->literal,r->code);
1927 if (r->flag & FLAG_START) {
1928 struct p_context *new = xmalloc(sizeof(struct p_context));
1929 debug_printf("push stack\n");
1930 *new = *ctx; /* physical copy */
1931 initialize_context(ctx);
1933 } else if ( ctx->w == RES_NONE || ! (ctx->old_flag & (1<<r->code))) {
1940 ctx->old_flag = r->flag;
1941 if (ctx->old_flag & FLAG_END) {
1942 struct p_context *old;
1943 debug_printf("pop stack\n");
1945 old->child->group = ctx->list_head;
1946 old->child->subshell = 0;
1947 *ctx = *old; /* physical copy */
1957 /* normal return is 0.
1958 * Syntax or xglob errors return 1. */
1959 static int done_word(o_string *dest, struct p_context *ctx)
1961 struct child_prog *child=ctx->child;
1962 glob_t *glob_target;
1965 debug_printf("done_word: %s %p\n", dest->data, child);
1966 if (dest->length == 0 && !dest->nonnull) {
1967 debug_printf(" true null, ignored\n");
1970 if (ctx->pending_redirect) {
1971 glob_target = &ctx->pending_redirect->word;
1975 return 1; /* syntax error, groups and arglists don't mix */
1978 debug_printf("checking %s for reserved-ness\n",dest->data);
1979 if (reserved_word(dest,ctx)) return ctx->w==RES_SNTX;
1981 glob_target = &child->glob_result;
1982 if (child->argv) flags |= GLOB_APPEND;
1984 gr = xglob(dest, flags, glob_target);
1985 if (gr != 0) return 1;
1988 if (ctx->pending_redirect) {
1989 ctx->pending_redirect=NULL;
1990 if (glob_target->gl_pathc != 1) {
1991 error_msg("ambiguous redirect");
1995 child->argv = glob_target->gl_pathv;
2000 /* The only possible error here is out of memory, in which case
2002 static int done_command(struct p_context *ctx)
2004 /* The child is really already in the pipe structure, so
2005 * advance the pipe counter and make a new, null child.
2006 * Only real trickiness here is that the uncommitted
2007 * child structure, to which ctx->child points, is not
2008 * counted in pi->num_progs. */
2009 struct pipe *pi=ctx->pipe;
2010 struct child_prog *prog=ctx->child;
2012 if (prog && prog->group == NULL
2013 && prog->argv == NULL
2014 && prog->redirects == NULL) {
2015 debug_printf("done_command: skipping null command\n");
2019 debug_printf("done_command: num_progs incremented to %d\n",pi->num_progs);
2021 debug_printf("done_command: initializing\n");
2023 pi->progs = xrealloc(pi->progs, sizeof(*pi->progs) * (pi->num_progs+1));
2025 prog = pi->progs + pi->num_progs;
2026 prog->redirects = NULL;
2028 prog->is_stopped = 0;
2030 prog->glob_result.gl_pathv = NULL;
2034 /* but ctx->pipe and ctx->list_head remain unchanged */
2038 static int done_pipe(struct p_context *ctx, pipe_style type)
2041 done_command(ctx); /* implicit closure of previous command */
2042 debug_printf("done_pipe, type %d\n", type);
2043 ctx->pipe->followup = type;
2044 ctx->pipe->r_mode = ctx->w;
2046 ctx->pipe->next = new_p;
2049 done_command(ctx); /* set up new pipe to accept commands */
2053 /* peek ahead in the in_str to find out if we have a "&n" construct,
2054 * as in "2>&1", that represents duplicating a file descriptor.
2055 * returns either -2 (syntax error), -1 (no &), or the number found.
2057 static int redirect_dup_num(struct in_str *input)
2061 if (ch != '&') return -1;
2063 b_getch(input); /* get the & */
2067 return -3; /* "-" represents "close me" */
2069 while (isdigit(ch)) {
2077 error_msg("ambiguous redirect");
2081 /* If a redirect is immediately preceded by a number, that number is
2082 * supposed to tell which file descriptor to redirect. This routine
2083 * looks for such preceding numbers. In an ideal world this routine
2084 * needs to handle all the following classes of redirects...
2085 * echo 2>foo # redirects fd 2 to file "foo", nothing passed to echo
2086 * echo 49>foo # redirects fd 49 to file "foo", nothing passed to echo
2087 * echo -2>foo # redirects fd 1 to file "foo", "-2" passed to echo
2088 * echo 49x>foo # redirects fd 1 to file "foo", "49x" passed to echo
2089 * A -1 output from this program means no valid number was found, so the
2090 * caller should use the appropriate default for this redirection.
2092 static int redirect_opt_num(o_string *o)
2096 if (o->length==0) return -1;
2097 for(num=0; num<o->length; num++) {
2098 if (!isdigit(*(o->data+num))) {
2102 /* reuse num (and save an int) */
2108 FILE *generate_stream_from_list(struct pipe *head)
2112 int pid, channel[2];
2113 if (pipe(channel)<0) perror_msg_and_die("pipe");
2116 perror_msg_and_die("fork");
2117 } else if (pid==0) {
2119 if (channel[1] != 1) {
2124 #define SURROGATE "surrogate response"
2125 write(1,SURROGATE,sizeof(SURROGATE));
2126 _exit(run_list(head));
2128 _exit(run_list_real(head)); /* leaks memory */
2131 debug_printf("forked child %d\n",pid);
2133 pf = fdopen(channel[0],"r");
2134 debug_printf("pipe on FILE *%p\n",pf);
2136 free_pipe_list(head,0);
2137 pf=popen("echo surrogate response","r");
2138 debug_printf("started fake pipe on FILE *%p\n",pf);
2143 /* this version hacked for testing purposes */
2144 /* return code is exit status of the process that is run. */
2145 static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end)
2148 o_string result=NULL_O_STRING;
2149 struct p_context inner;
2151 struct in_str pipe_str;
2152 initialize_context(&inner);
2154 /* recursion to generate command */
2155 retcode = parse_stream(&result, &inner, input, subst_end);
2156 if (retcode != 0) return retcode; /* syntax error or EOF */
2157 done_word(&result, &inner);
2158 done_pipe(&inner, PIPE_SEQ);
2161 p=generate_stream_from_list(inner.list_head);
2162 if (p==NULL) return 1;
2163 mark_open(fileno(p));
2164 setup_file_in_str(&pipe_str, p);
2166 /* now send results of command back into original context */
2167 retcode = parse_stream(dest, ctx, &pipe_str, '\0');
2168 /* XXX In case of a syntax error, should we try to kill the child?
2169 * That would be tough to do right, so just read until EOF. */
2171 while (b_getch(&pipe_str)!=EOF) { /* discard */ };
2174 debug_printf("done reading from pipe, pclose()ing\n");
2175 /* This is the step that wait()s for the child. Should be pretty
2176 * safe, since we just read an EOF from its stdout. We could try
2177 * to better, by using wait(), and keeping track of background jobs
2178 * at the same time. That would be a lot of work, and contrary
2179 * to the KISS philosophy of this program. */
2180 mark_closed(fileno(p));
2182 free_pipe_list(inner.list_head,0);
2183 debug_printf("pclosed, retcode=%d\n",retcode);
2184 /* XXX this process fails to trim a single trailing newline */
2188 static int parse_group(o_string *dest, struct p_context *ctx,
2189 struct in_str *input, int ch)
2192 struct p_context sub;
2193 struct child_prog *child = ctx->child;
2196 return 1; /* syntax error, groups and arglists don't mix */
2198 initialize_context(&sub);
2200 case '(': endch=')'; child->subshell=1; break;
2201 case '{': endch='}'; break;
2202 default: syntax(); /* really logic error */
2204 rcode=parse_stream(dest,&sub,input,endch);
2205 done_word(dest,&sub); /* finish off the final word in the subcontext */
2206 done_pipe(&sub, PIPE_SEQ); /* and the final command there, too */
2207 child->group = sub.list_head;
2209 /* child remains "open", available for possible redirects */
2212 /* basically useful version until someone wants to get fancier,
2213 * see the bash man page under "Parameter Expansion" */
2214 static void lookup_param(o_string *dest, struct p_context *ctx, o_string *src)
2218 p = getenv(src->data);
2220 p = get_local_var(src->data);
2222 if (p) parse_string(dest, ctx, p); /* recursion */
2226 /* return code: 0 for OK, 1 for syntax error */
2227 static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input)
2230 o_string alt=NULL_O_STRING;
2232 int ch = input->peek(input); /* first character after the $ */
2233 debug_printf("handle_dollar: ch=%c\n",ch);
2235 while(ch=b_peek(input),isalnum(ch) || ch=='_') {
2239 lookup_param(dest, ctx, &alt);
2240 } else if (isdigit(ch)) {
2241 i = ch-'0'; /* XXX is $0 special? */
2242 if (i<global_argc) {
2243 parse_string(dest, ctx, global_argv[i]); /* recursion */
2246 } else switch (ch) {
2248 b_adduint(dest,getpid());
2252 if (last_bg_pid > 0) b_adduint(dest, last_bg_pid);
2256 b_adduint(dest,last_return_code);
2260 b_adduint(dest,global_argc ? global_argc-1 : 0);
2265 /* XXX maybe someone will try to escape the '}' */
2266 while(ch=b_getch(input),ch!=EOF && ch!='}') {
2273 lookup_param(dest, ctx, &alt);
2277 process_command_subs(dest, ctx, input, ')');
2281 for (i=1; i<global_argc; i++) {
2282 parse_string(dest, ctx, global_argv[i]);
2283 if (i+1 < global_argc) parse_string(dest, ctx, sep);
2289 /* still unhandled, but should be eventually */
2290 error_msg("unhandled syntax: $%c",ch);
2294 b_addqchr(dest,'$',dest->quote);
2296 /* Eat the character if the flag was set. If the compiler
2297 * is smart enough, we could substitute "b_getch(input);"
2298 * for all the "advance = 1;" above, and also end up with
2299 * a nice size-optimized program. Hah! That'll be the day.
2301 if (advance) b_getch(input);
2305 int parse_string(o_string *dest, struct p_context *ctx, const char *src)
2308 setup_string_in_str(&foo, src);
2309 return parse_stream(dest, ctx, &foo, '\0');
2312 /* return code is 0 for normal exit, 1 for syntax error */
2313 int parse_stream(o_string *dest, struct p_context *ctx,
2314 struct in_str *input, int end_trigger)
2318 redir_type redir_style;
2321 /* Only double-quote state is handled in the state variable dest->quote.
2322 * A single-quote triggers a bypass of the main loop until its mate is
2323 * found. When recursing, quote state is passed in via dest->quote. */
2325 debug_printf("parse_stream, end_trigger=%d\n",end_trigger);
2326 while ((ch=b_getch(input))!=EOF) {
2328 next = (ch == '\n') ? 0 : b_peek(input);
2329 debug_printf("parse_stream: ch=%c (%d) m=%d quote=%d\n",
2330 ch,ch,m,dest->quote);
2331 if (m==0 || ((m==1 || m==2) && dest->quote)) {
2332 b_addqchr(dest, ch, dest->quote);
2334 if (m==2) { /* unquoted IFS */
2335 done_word(dest, ctx);
2336 /* If we aren't performing a substitution, treat a newline as a
2337 * command separator. */
2338 if (end_trigger != '\0' && ch=='\n')
2339 done_pipe(ctx,PIPE_SEQ);
2341 if (ch == end_trigger && !dest->quote && ctx->w==RES_NONE) {
2342 debug_printf("leaving parse_stream (triggered)\n");
2347 /* Yahoo! Time to run with it! */
2348 done_pipe(ctx,PIPE_SEQ);
2349 run_list(ctx->list_head);
2350 initialize_context(ctx);
2353 if (m!=2) switch (ch) {
2355 if (dest->length == 0 && !dest->quote) {
2356 while(ch=b_peek(input),ch!=EOF && ch!='\n') { b_getch(input); }
2358 b_addqchr(dest, ch, dest->quote);
2366 b_addqchr(dest, '\\', dest->quote);
2367 b_addqchr(dest, b_getch(input), dest->quote);
2370 if (handle_dollar(dest, ctx, input)!=0) return 1;
2374 while(ch=b_getch(input),ch!=EOF && ch!='\'') {
2384 dest->quote = !dest->quote;
2387 process_command_subs(dest, ctx, input, '`');
2390 redir_fd = redirect_opt_num(dest);
2391 done_word(dest, ctx);
2392 redir_style=REDIRECT_OVERWRITE;
2394 redir_style=REDIRECT_APPEND;
2396 } else if (next == '(') {
2397 syntax(); /* until we support >(list) Process Substitution */
2400 setup_redirect(ctx, redir_fd, redir_style, input);
2403 redir_fd = redirect_opt_num(dest);
2404 done_word(dest, ctx);
2405 redir_style=REDIRECT_INPUT;
2407 redir_style=REDIRECT_HEREIS;
2409 } else if (next == '>') {
2410 redir_style=REDIRECT_IO;
2412 } else if (next == '(') {
2413 syntax(); /* until we support <(list) Process Substitution */
2416 setup_redirect(ctx, redir_fd, redir_style, input);
2419 done_word(dest, ctx);
2420 done_pipe(ctx,PIPE_SEQ);
2423 done_word(dest, ctx);
2426 done_pipe(ctx,PIPE_AND);
2428 done_pipe(ctx,PIPE_BG);
2432 done_word(dest, ctx);
2435 done_pipe(ctx,PIPE_OR);
2437 /* we could pick up a file descriptor choice here
2438 * with redirect_opt_num(), but bash doesn't do it.
2439 * "echo foo 2| cat" yields "foo 2". */
2445 if (parse_group(dest, ctx, input, ch)!=0) return 1;
2449 syntax(); /* Proper use of this character caught by end_trigger */
2453 syntax(); /* this is really an internal logic error */
2458 /* complain if quote? No, maybe we just finished a command substitution
2459 * that was quoted. Example:
2460 * $ echo "`cat foo` plus more"
2461 * and we just got the EOF generated by the subshell that ran "cat foo"
2462 * The only real complaint is if we got an EOF when end_trigger != '\0',
2463 * that is, we were really supposed to get end_trigger, and never got
2464 * one before the EOF. Can't use the standard "syntax error" return code,
2465 * so that parse_stream_outer can distinguish the EOF and exit smoothly. */
2466 debug_printf("leaving parse_stream (EOF)\n");
2467 if (end_trigger != '\0') return -1;
2471 void mapset(const unsigned char *set, int code)
2473 const unsigned char *s;
2474 for (s=set; *s; s++) map[*s] = code;
2477 void update_ifs_map(void)
2479 /* char *ifs and char map[256] are both globals. */
2480 ifs = getenv("IFS");
2481 if (ifs == NULL) ifs=" \t\n";
2482 /* Precompute a list of 'flow through' behavior so it can be treated
2483 * quickly up front. Computation is necessary because of IFS.
2484 * Special case handling of IFS == " \t\n" is not implemented.
2485 * The map[] array only really needs two bits each, and on most machines
2486 * that would be faster because of the reduced L1 cache footprint.
2488 memset(map,0,sizeof(map)); /* most characters flow through always */
2489 mapset("\\$'\"`", 3); /* never flow through */
2490 mapset("<>;&|(){}#", 1); /* flow through if quoted */
2491 mapset(ifs, 2); /* also flow through if quoted */
2494 /* most recursion does not come through here, the exeception is
2495 * from builtin_source() */
2496 int parse_stream_outer(struct in_str *inp)
2499 struct p_context ctx;
2500 o_string temp=NULL_O_STRING;
2503 initialize_context(&ctx);
2506 rcode = parse_stream(&temp, &ctx, inp, '\n');
2507 done_word(&temp, &ctx);
2508 done_pipe(&ctx,PIPE_SEQ);
2509 run_list(ctx.list_head);
2511 } while (rcode != -1); /* loop on syntax errors, return on EOF */
2515 static int parse_string_outer(const char *s)
2517 struct in_str input;
2518 setup_string_in_str(&input, s);
2519 return parse_stream_outer(&input);
2522 static int parse_file_outer(FILE *f)
2525 struct in_str input;
2526 setup_file_in_str(&input, f);
2527 rcode = parse_stream_outer(&input);
2531 static void sigchld_handler(int sig)
2534 signal(SIGCHLD, sigchld_handler);
2537 static void setup_job_control()
2539 /* If we get started under a job aware app (like bash
2540 * for example), make sure we are now in charge so we
2541 * don't fight over who gets the foreground */
2542 /* don't pay any attention to this signal; it just confuses
2543 things and isn't really meant for shells anyway */
2546 signal(SIGTTOU, SIG_IGN);
2547 setpgid(0, getpid());
2548 tcsetpgrp(ctty, getpid());
2549 signal(SIGCHLD, sigchld_handler);
2553 int shell_main(int argc, char **argv)
2559 /* XXX what should these be while sourcing /etc/profile? */
2563 /* (re?) initialize globals. Sometimes shell_main() ends up calling
2564 * shell_main(), therefore we cannot rely on the BSS to zero out this
2565 * stuff. Reset these to 0 every time. */
2567 /* map[] is taken care of with call to update_ifs_map() */
2570 close_me_head = NULL;
2575 /* Initialize some more globals to non-zero values */
2577 #ifdef BB_FEATURE_COMMAND_EDITING
2578 cmdedit_set_initial_prompt();
2584 /* initialize our shell local variables with the values
2585 * currently living in the environment */
2588 set_local_var(*e, 2); /* without call putenv() */
2591 last_return_code=EXIT_SUCCESS;
2594 if (argv[0] && argv[0][0] == '-') {
2595 debug_printf("\nsourcing /etc/profile\n");
2596 input = xfopen("/etc/profile", "r");
2597 mark_open(fileno(input));
2598 parse_file_outer(input);
2599 mark_closed(fileno(input));
2604 while ((opt = getopt(argc, argv, "c:xif")) > 0) {
2608 global_argv = argv+optind;
2609 global_argc = argc-optind;
2610 opt = parse_string_outer(optarg);
2622 fprintf(stderr, "Usage: sh [FILE]...\n"
2623 " or: sh -c command [args]...\n\n");
2630 /* A shell is interactive if the `-i' flag was given, or if all of
2631 * the following conditions are met:
2633 * no arguments remaining or the -s flag given
2634 * standard input is a terminal
2635 * standard output is a terminal
2636 * Refer to Posix.2, the description of the `sh' utility. */
2637 if (argv[optind]==NULL && input==stdin &&
2638 isatty(fileno(stdin)) && isatty(fileno(stdout))) {
2642 debug_printf("\ninteractive=%d\n", interactive);
2644 /* Looks like they want an interactive shell */
2645 fprintf(stdout, "\nhush -- the humble shell v0.01 (testing)\n\n");
2646 setup_job_control();
2649 if (argv[optind]==NULL) {
2650 opt=parse_file_outer(stdin);
2654 debug_printf("\nrunning script '%s'\n", argv[optind]);
2655 global_argv = argv+optind;
2656 global_argc = argc-optind;
2657 input = xfopen(argv[optind], "r");
2658 opt = parse_file_outer(input);
2660 #ifdef BB_FEATURE_CLEAN_UP
2662 if (cwd && cwd != unknown)
2665 struct variables *cur, *tmp;
2666 for(cur = top_vars; cur; cur = tmp) {
2668 if (!cur->flg_read_only) {
2678 return(opt?opt:last_return_code);