1 /* vi: set sw=4 ts=4: */
3 * ash shell port for busybox
5 * This code is derived from software contributed to Berkeley by
8 * Original BSD copyright notice is retained at the end of this file.
10 * Copyright (c) 1989, 1991, 1993, 1994
11 * The Regents of the University of California. All rights reserved.
13 * Copyright (c) 1997-2005 Herbert Xu <herbert@gondor.apana.org.au>
14 * was re-ported from NetBSD and debianized.
16 * Licensed under GPLv2 or later, see file LICENSE in this source tree.
20 * The following should be set to reflect the type of system you have:
21 * JOBS -> 1 if you have Berkeley job control, 0 otherwise.
22 * define SYSV if you are running under System V.
23 * define DEBUG=1 to compile in debugging ('set -o debug' to turn on)
24 * define DEBUG=2 to compile in and turn on debugging.
26 * When debugging is on (DEBUG is 1 and "set -o debug" was executed),
27 * debugging info will be written to ./trace and a quit signal
28 * will generate a core dump.
31 /* Tweak debug output verbosity here */
38 #define JOBS ENABLE_ASH_JOB_CONTROL
42 #include <sys/times.h>
43 #include <sys/utsname.h> /* for setting $HOSTNAME */
45 #include "busybox.h" /* for applet_names */
47 #if defined(__ANDROID_API__) && __ANDROID_API__ <= 24
48 /* Bionic at least up to version 24 has no glob() */
49 # undef ENABLE_ASH_INTERNAL_GLOB
50 # define ENABLE_ASH_INTERNAL_GLOB 1
53 #if !ENABLE_ASH_INTERNAL_GLOB
58 #include "shell_common.h"
59 #if ENABLE_SH_MATH_SUPPORT
62 #if ENABLE_ASH_RANDOM_SUPPORT
65 # define CLEAR_RANDOM_T(rnd) ((void)0)
68 #include "NUM_APPLETS.h"
70 /* STANDALONE does not make sense, and won't compile */
71 # undef CONFIG_FEATURE_SH_STANDALONE
72 # undef ENABLE_FEATURE_SH_STANDALONE
73 # undef IF_FEATURE_SH_STANDALONE
74 # undef IF_NOT_FEATURE_SH_STANDALONE
75 # define ENABLE_FEATURE_SH_STANDALONE 0
76 # define IF_FEATURE_SH_STANDALONE(...)
77 # define IF_NOT_FEATURE_SH_STANDALONE(...) __VA_ARGS__
81 # define PIPE_BUF 4096 /* amount of buffering in a pipe */
85 # error "Do not even bother, ash will not run on NOMMU machine"
91 //config: depends on !NOMMU
93 //config: Tha 'ash' shell adds about 60k in the default configuration and is
94 //config: the most complete and most pedantically correct shell included with
95 //config: busybox. This shell is actually a derivative of the Debian 'dash'
96 //config: shell (by Herbert Xu), which was created by porting the 'ash' shell
97 //config: (written by Kenneth Almquist) from NetBSD.
99 //config:config ASH_OPTIMIZE_FOR_SIZE
100 //config: bool "Optimize for size instead of speed"
102 //config: depends on ASH
104 //config: Compile ash for reduced size at the price of speed.
106 //config:config ASH_INTERNAL_GLOB
107 //config: bool "Use internal glob() implementation"
109 //config: depends on ASH
111 //config: Do not use glob() function from libc, use internal implementation.
112 //config: Use this if you are getting "glob.h: No such file or directory"
113 //config: or similar build errors.
115 //config:config ASH_RANDOM_SUPPORT
116 //config: bool "Pseudorandom generator and $RANDOM variable"
118 //config: depends on ASH
120 //config: Enable pseudorandom generator and dynamic variable "$RANDOM".
121 //config: Each read of "$RANDOM" will generate a new pseudorandom value.
122 //config: You can reset the generator by using a specified start value.
123 //config: After "unset RANDOM" the generator will switch off and this
124 //config: variable will no longer have special treatment.
126 //config:config ASH_EXPAND_PRMT
127 //config: bool "Expand prompt string"
129 //config: depends on ASH
131 //config: "PS#" may contain volatile content, such as backquote commands.
132 //config: This option recreates the prompt string from the environment
133 //config: variable each time it is displayed.
135 //config:config ASH_BASH_COMPAT
136 //config: bool "bash-compatible extensions"
138 //config: depends on ASH
140 //config: Enable bash-compatible extensions.
142 //config:config ASH_IDLE_TIMEOUT
143 //config: bool "Idle timeout variable"
145 //config: depends on ASH
147 //config: Enables bash-like auto-logout after $TMOUT seconds of idle time.
149 //config:config ASH_JOB_CONTROL
150 //config: bool "Job control"
152 //config: depends on ASH
154 //config: Enable job control in the ash shell.
156 //config:config ASH_ALIAS
157 //config: bool "Alias support"
159 //config: depends on ASH
161 //config: Enable alias support in the ash shell.
163 //config:config ASH_GETOPTS
164 //config: bool "Builtin getopt to parse positional parameters"
166 //config: depends on ASH
168 //config: Enable support for getopts builtin in ash.
170 //config:config ASH_BUILTIN_ECHO
171 //config: bool "Builtin version of 'echo'"
173 //config: depends on ASH
175 //config: Enable support for echo builtin in ash.
177 //config:config ASH_BUILTIN_PRINTF
178 //config: bool "Builtin version of 'printf'"
180 //config: depends on ASH
182 //config: Enable support for printf builtin in ash.
184 //config:config ASH_BUILTIN_TEST
185 //config: bool "Builtin version of 'test'"
187 //config: depends on ASH
189 //config: Enable support for test builtin in ash.
191 //config:config ASH_HELP
192 //config: bool "help builtin"
194 //config: depends on ASH
196 //config: Enable help builtin in ash.
198 //config:config ASH_CMDCMD
199 //config: bool "'command' command to override shell builtins"
201 //config: depends on ASH
203 //config: Enable support for the ash 'command' builtin, which allows
204 //config: you to run the specified command with the specified arguments,
205 //config: even when there is an ash builtin command with the same name.
207 //config:config ASH_MAIL
208 //config: bool "Check for new mail on interactive shells"
210 //config: depends on ASH
212 //config: Enable "check for new mail" function in the ash shell.
215 //applet:IF_ASH(APPLET(ash, BB_DIR_BIN, BB_SUID_DROP))
216 //applet:IF_FEATURE_SH_IS_ASH(APPLET_ODDNAME(sh, ash, BB_DIR_BIN, BB_SUID_DROP, sh))
217 //applet:IF_FEATURE_BASH_IS_ASH(APPLET_ODDNAME(bash, ash, BB_DIR_BIN, BB_SUID_DROP, bash))
219 //kbuild:lib-$(CONFIG_ASH) += ash.o ash_ptr_hack.o shell_common.o
220 //kbuild:lib-$(CONFIG_ASH_RANDOM_SUPPORT) += random.o
223 /* ============ Hash table sizes. Configurable. */
227 #define CMDTABLESIZE 31 /* should be prime */
230 /* ============ Shell options */
232 static const char *const optletters_optnames[] = {
247 #if ENABLE_ASH_BASH_COMPAT
256 #define optletters(n) optletters_optnames[n][0]
257 #define optnames(n) (optletters_optnames[n] + 1)
259 enum { NOPTS = ARRAY_SIZE(optletters_optnames) };
262 /* ============ Misc data */
264 #define msg_illnum "Illegal number: %s"
267 * We enclose jmp_buf in a structure so that we can declare pointers to
268 * jump locations. The global variable handler contains the location to
269 * jump to when an exception occurs, and the global variable exception_type
270 * contains a code identifying the exception. To implement nested
271 * exception handlers, the user should save the value of handler on entry
272 * to an inner scope, set handler to point to a jmploc structure for the
273 * inner scope, and restore handler on exit from the scope.
279 struct globals_misc {
280 uint8_t exitstatus; /* exit status of last command */
281 uint8_t back_exitstatus;/* exit status of backquoted command */
282 smallint job_warning; /* user was warned about stopped jobs (can be 2, 1 or 0). */
283 int rootpid; /* pid of main shell */
284 /* shell level: 0 for the main shell, 1 for its children, and so on */
286 #define rootshell (!shlvl)
287 char *minusc; /* argument to -c option */
289 char *curdir; // = nullstr; /* current working directory */
290 char *physdir; // = nullstr; /* physical working directory */
292 char *arg0; /* value of $0 */
294 struct jmploc *exception_handler;
296 volatile int suppress_int; /* counter */
297 volatile /*sig_atomic_t*/ smallint pending_int; /* 1 = got SIGINT */
298 /* last pending signal */
299 volatile /*sig_atomic_t*/ smallint pending_sig;
300 smallint exception_type; /* kind of exception (0..5) */
302 #define EXINT 0 /* SIGINT received */
303 #define EXERROR 1 /* a generic error */
304 #define EXSHELLPROC 2 /* execute a shell procedure */
305 #define EXEXEC 3 /* command execution failed */
306 #define EXEXIT 4 /* exit the shell */
307 #define EXSIG 5 /* trapped signal in wait(1) */
310 char nullstr[1]; /* zero length string */
313 #define eflag optlist[0]
314 #define fflag optlist[1]
315 #define Iflag optlist[2]
316 #define iflag optlist[3]
317 #define mflag optlist[4]
318 #define nflag optlist[5]
319 #define sflag optlist[6]
320 #define xflag optlist[7]
321 #define vflag optlist[8]
322 #define Cflag optlist[9]
323 #define aflag optlist[10]
324 #define bflag optlist[11]
325 #define uflag optlist[12]
326 #define viflag optlist[13]
327 #if ENABLE_ASH_BASH_COMPAT
328 # define pipefail optlist[14]
333 # define nolog optlist[14 + ENABLE_ASH_BASH_COMPAT]
334 # define debug optlist[15 + ENABLE_ASH_BASH_COMPAT]
337 /* trap handler commands */
339 * Sigmode records the current value of the signal handlers for the various
340 * modes. A value of zero means that the current handler is not known.
341 * S_HARD_IGN indicates that the signal was ignored on entry to the shell.
343 char sigmode[NSIG - 1];
344 #define S_DFL 1 /* default signal handling (SIG_DFL) */
345 #define S_CATCH 2 /* signal is caught */
346 #define S_IGN 3 /* signal is ignored (SIG_IGN) */
347 #define S_HARD_IGN 4 /* signal is ignored permanently */
349 /* indicates specified signal received */
350 uint8_t gotsig[NSIG - 1]; /* offset by 1: "signal" 0 is meaningless */
351 uint8_t may_have_traps; /* 0: definitely no traps are set, 1: some traps may be set */
353 char **trap_ptr; /* used only by "trap hack" */
355 /* Rarely referenced stuff */
356 #if ENABLE_ASH_RANDOM_SUPPORT
359 pid_t backgndpid; /* pid of last background process */
361 extern struct globals_misc *const ash_ptr_to_globals_misc;
362 #define G_misc (*ash_ptr_to_globals_misc)
363 #define exitstatus (G_misc.exitstatus )
364 #define back_exitstatus (G_misc.back_exitstatus )
365 #define job_warning (G_misc.job_warning)
366 #define rootpid (G_misc.rootpid )
367 #define shlvl (G_misc.shlvl )
368 #define minusc (G_misc.minusc )
369 #define curdir (G_misc.curdir )
370 #define physdir (G_misc.physdir )
371 #define arg0 (G_misc.arg0 )
372 #define exception_handler (G_misc.exception_handler)
373 #define exception_type (G_misc.exception_type )
374 #define suppress_int (G_misc.suppress_int )
375 #define pending_int (G_misc.pending_int )
376 #define pending_sig (G_misc.pending_sig )
377 #define isloginsh (G_misc.isloginsh )
378 #define nullstr (G_misc.nullstr )
379 #define optlist (G_misc.optlist )
380 #define sigmode (G_misc.sigmode )
381 #define gotsig (G_misc.gotsig )
382 #define may_have_traps (G_misc.may_have_traps )
383 #define trap (G_misc.trap )
384 #define trap_ptr (G_misc.trap_ptr )
385 #define random_gen (G_misc.random_gen )
386 #define backgndpid (G_misc.backgndpid )
387 #define INIT_G_misc() do { \
388 (*(struct globals_misc**)&ash_ptr_to_globals_misc) = xzalloc(sizeof(G_misc)); \
396 /* ============ DEBUG */
398 static void trace_printf(const char *fmt, ...);
399 static void trace_vprintf(const char *fmt, va_list va);
400 # define TRACE(param) trace_printf param
401 # define TRACEV(param) trace_vprintf param
402 # define close(fd) do { \
404 if (close(dfd) < 0) \
405 bb_error_msg("bug on %d: closing %d(0x%x)", \
406 __LINE__, dfd, dfd); \
409 # define TRACE(param)
410 # define TRACEV(param)
414 /* ============ Utility functions */
415 #define xbarrier() do { __asm__ __volatile__ ("": : :"memory"); } while (0)
417 #define is_name(c) ((c) == '_' || isalpha((unsigned char)(c)))
418 #define is_in_name(c) ((c) == '_' || isalnum((unsigned char)(c)))
420 static int isdigit_str9(const char *str)
422 int maxlen = 9 + 1; /* max 9 digits: 999999999 */
423 while (--maxlen && isdigit(*str))
425 return (*str == '\0');
428 static const char *var_end(const char *var)
437 /* ============ Interrupts / exceptions */
439 static void exitshell(void) NORETURN;
442 * These macros allow the user to suspend the handling of interrupt signals
443 * over a period of time. This is similar to SIGHOLD or to sigblock, but
444 * much more efficient and portable. (But hacking the kernel is so much
445 * more fun than worrying about efficiency and portability. :-))
447 #define INT_OFF do { \
453 * Called to raise an exception. Since C doesn't include exceptions, we
454 * just do a longjmp to the exception handler. The type of exception is
455 * stored in the global variable "exception_type".
457 static void raise_exception(int) NORETURN;
459 raise_exception(int e)
462 if (exception_handler == NULL)
467 longjmp(exception_handler->loc, 1);
470 #define raise_exception(e) do { \
471 TRACE(("raising exception %d on line %d\n", (e), __LINE__)); \
472 raise_exception(e); \
477 * Called from trap.c when a SIGINT is received. (If the user specifies
478 * that SIGINT is to be trapped or ignored using the trap builtin, then
479 * this routine is not called.) Suppressint is nonzero when interrupts
480 * are held using the INT_OFF macro. (The test for iflag is just
481 * defensive programming.)
483 static void raise_interrupt(void) NORETURN;
485 raise_interrupt(void)
490 /* Signal is not automatically unmasked after it is raised,
491 * do it ourself - unmask all signals */
492 sigprocmask_allsigs(SIG_UNBLOCK);
493 /* pending_sig = 0; - now done in signal_handler() */
496 if (gotsig[SIGINT - 1] && !trap[SIGINT]) {
497 if (!(rootshell && iflag)) {
498 /* Kill ourself with SIGINT */
499 signal(SIGINT, SIG_DFL);
504 /* bash: ^C even on empty command line sets $? */
505 exitstatus = SIGINT + 128;
506 raise_exception(ex_type);
510 #define raise_interrupt() do { \
511 TRACE(("raising interrupt on line %d\n", __LINE__)); \
516 static IF_ASH_OPTIMIZE_FOR_SIZE(inline) void
520 if (--suppress_int == 0 && pending_int) {
524 #define INT_ON int_on()
525 static IF_ASH_OPTIMIZE_FOR_SIZE(inline) void
533 #define FORCE_INT_ON force_int_on()
535 #define SAVE_INT(v) ((v) = suppress_int)
537 #define RESTORE_INT(v) do { \
539 suppress_int = (v); \
540 if (suppress_int == 0 && pending_int) \
545 /* ============ Stdout/stderr output */
548 outstr(const char *p, FILE *file)
556 flush_stdout_stderr(void)
563 /* Was called outcslow(c,FILE*), but c was always '\n' */
565 newline_and_flush(FILE *dest)
573 static int out1fmt(const char *, ...) __attribute__((__format__(__printf__,1,2)));
575 out1fmt(const char *fmt, ...)
582 r = vprintf(fmt, ap);
588 static int fmtstr(char *, size_t, const char *, ...) __attribute__((__format__(__printf__,3,4)));
590 fmtstr(char *outbuf, size_t length, const char *fmt, ...)
597 ret = vsnprintf(outbuf, length, fmt, ap);
604 out1str(const char *p)
610 out2str(const char *p)
613 flush_stdout_stderr();
617 /* ============ Parser structures */
619 /* control characters in argument strings */
620 #define CTL_FIRST CTLESC
621 #define CTLESC ((unsigned char)'\201') /* escape next character */
622 #define CTLVAR ((unsigned char)'\202') /* variable defn */
623 #define CTLENDVAR ((unsigned char)'\203')
624 #define CTLBACKQ ((unsigned char)'\204')
625 #define CTLARI ((unsigned char)'\206') /* arithmetic expression */
626 #define CTLENDARI ((unsigned char)'\207')
627 #define CTLQUOTEMARK ((unsigned char)'\210')
628 #define CTL_LAST CTLQUOTEMARK
630 /* variable substitution byte (follows CTLVAR) */
631 #define VSTYPE 0x0f /* type of variable substitution */
632 #define VSNUL 0x10 /* colon--treat the empty string as unset */
634 /* values of VSTYPE field */
635 #define VSNORMAL 0x1 /* normal variable: $var or ${var} */
636 #define VSMINUS 0x2 /* ${var-text} */
637 #define VSPLUS 0x3 /* ${var+text} */
638 #define VSQUESTION 0x4 /* ${var?message} */
639 #define VSASSIGN 0x5 /* ${var=text} */
640 #define VSTRIMRIGHT 0x6 /* ${var%pattern} */
641 #define VSTRIMRIGHTMAX 0x7 /* ${var%%pattern} */
642 #define VSTRIMLEFT 0x8 /* ${var#pattern} */
643 #define VSTRIMLEFTMAX 0x9 /* ${var##pattern} */
644 #define VSLENGTH 0xa /* ${#var} */
645 #if ENABLE_ASH_BASH_COMPAT
646 #define VSSUBSTR 0xc /* ${var:position:length} */
647 #define VSREPLACE 0xd /* ${var/pattern/replacement} */
648 #define VSREPLACEALL 0xe /* ${var//pattern/replacement} */
651 static const char dolatstr[] ALIGN1 = {
652 CTLQUOTEMARK, CTLVAR, VSNORMAL, '@', '=', CTLQUOTEMARK, '\0'
654 #define DOLATSTRLEN 6
673 #if ENABLE_ASH_BASH_COMPAT
690 smallint type; /* Nxxxx */
693 union node *redirect;
698 smallint pipe_backgnd;
699 struct nodelist *cmdlist;
705 union node *redirect;
718 union node *elsepart;
745 struct nodelist *backquote;
748 /* nfile and ndup layout must match!
749 * NTOFD (>&fdnum) uses ndup structure, but we may discover mid-flight
750 * that it is actually NTO2 (>&file), and change its type.
767 char *_unused_expfname;
786 struct nredir nredir;
787 struct nbinary nbinary;
791 struct nclist nclist;
800 * NODE_EOF is returned by parsecmd when it encounters an end of file.
801 * It must be distinct from NULL.
803 #define NODE_EOF ((union node *) -1L)
806 struct nodelist *next;
819 freefunc(struct funcnode *f)
821 if (f && --f->count < 0)
826 /* ============ Debugging output */
830 static FILE *tracefile;
833 trace_printf(const char *fmt, ...)
840 fprintf(tracefile, "%u ", (int) time(NULL));
842 fprintf(tracefile, "[%u] ", (int) getpid());
844 fprintf(tracefile, "pending s:%d i:%d(supp:%d) ", pending_sig, pending_int, suppress_int);
846 vfprintf(tracefile, fmt, va);
851 trace_vprintf(const char *fmt, va_list va)
856 fprintf(tracefile, "%u ", (int) time(NULL));
858 fprintf(tracefile, "[%u] ", (int) getpid());
860 fprintf(tracefile, "pending s:%d i:%d(supp:%d) ", pending_sig, pending_int, suppress_int);
861 vfprintf(tracefile, fmt, va);
865 trace_puts(const char *s)
873 trace_puts_quoted(char *s)
880 putc('"', tracefile);
881 for (p = s; *p; p++) {
882 switch ((unsigned char)*p) {
883 case '\n': c = 'n'; goto backslash;
884 case '\t': c = 't'; goto backslash;
885 case '\r': c = 'r'; goto backslash;
886 case '\"': c = '\"'; goto backslash;
887 case '\\': c = '\\'; goto backslash;
888 case CTLESC: c = 'e'; goto backslash;
889 case CTLVAR: c = 'v'; goto backslash;
890 case CTLBACKQ: c = 'q'; goto backslash;
892 putc('\\', tracefile);
896 if (*p >= ' ' && *p <= '~')
899 putc('\\', tracefile);
900 putc((*p >> 6) & 03, tracefile);
901 putc((*p >> 3) & 07, tracefile);
902 putc(*p & 07, tracefile);
907 putc('"', tracefile);
911 trace_puts_args(char **ap)
918 trace_puts_quoted(*ap);
920 putc('\n', tracefile);
923 putc(' ', tracefile);
938 /* leave open because libedit might be using it */
941 strcpy(s, "./trace");
943 if (!freopen(s, "a", tracefile)) {
944 fprintf(stderr, "Can't re-open %s\n", s);
949 tracefile = fopen(s, "a");
950 if (tracefile == NULL) {
951 fprintf(stderr, "Can't open %s\n", s);
957 flags = fcntl(fileno(tracefile), F_GETFL);
959 fcntl(fileno(tracefile), F_SETFL, flags | O_APPEND);
961 setlinebuf(tracefile);
962 fputs("\nTracing started.\n", tracefile);
966 indent(int amount, char *pfx, FILE *fp)
970 for (i = 0; i < amount; i++) {
971 if (pfx && i == amount - 1)
977 /* little circular references here... */
978 static void shtree(union node *n, int ind, char *pfx, FILE *fp);
981 sharg(union node *arg, FILE *fp)
984 struct nodelist *bqlist;
985 unsigned char subtype;
987 if (arg->type != NARG) {
988 out1fmt("<node type %d>\n", arg->type);
991 bqlist = arg->narg.backquote;
992 for (p = arg->narg.text; *p; p++) {
993 switch ((unsigned char)*p) {
1002 if (subtype == VSLENGTH)
1010 if (subtype & VSNUL)
1013 switch (subtype & VSTYPE) {
1039 case VSTRIMRIGHTMAX:
1046 out1fmt("<subtype %d>", subtype);
1055 shtree(bqlist->n, -1, NULL, fp);
1066 shcmd(union node *cmd, FILE *fp)
1074 for (np = cmd->ncmd.args; np; np = np->narg.next) {
1080 for (np = cmd->ncmd.redirect; np; np = np->nfile.next) {
1084 switch (np->nfile.type) {
1085 case NTO: s = ">>"+1; dftfd = 1; break;
1086 case NCLOBBER: s = ">|"; dftfd = 1; break;
1087 case NAPPEND: s = ">>"; dftfd = 1; break;
1088 #if ENABLE_ASH_BASH_COMPAT
1091 case NTOFD: s = ">&"; dftfd = 1; break;
1092 case NFROM: s = "<"; break;
1093 case NFROMFD: s = "<&"; break;
1094 case NFROMTO: s = "<>"; break;
1095 default: s = "*error*"; break;
1097 if (np->nfile.fd != dftfd)
1098 fprintf(fp, "%d", np->nfile.fd);
1100 if (np->nfile.type == NTOFD || np->nfile.type == NFROMFD) {
1101 fprintf(fp, "%d", np->ndup.dupfd);
1103 sharg(np->nfile.fname, fp);
1110 shtree(union node *n, int ind, char *pfx, FILE *fp)
1112 struct nodelist *lp;
1118 indent(ind, pfx, fp);
1120 if (n == NODE_EOF) {
1135 shtree(n->nbinary.ch1, ind, NULL, fp);
1138 shtree(n->nbinary.ch2, ind, NULL, fp);
1146 for (lp = n->npipe.cmdlist; lp; lp = lp->next) {
1147 shtree(lp->n, 0, NULL, fp);
1151 if (n->npipe.pipe_backgnd)
1157 fprintf(fp, "<node type %d>", n->type);
1165 showtree(union node *n)
1167 trace_puts("showtree called\n");
1168 shtree(n, 1, NULL, stderr);
1174 /* ============ Parser data */
1177 * ash_vmsg() needs parsefile->fd, hence parsefile definition is moved up.
1180 struct strlist *next;
1187 struct strpush *prev; /* preceding string on stack */
1189 int prev_left_in_line;
1190 #if ENABLE_ASH_ALIAS
1191 struct alias *ap; /* if push was associated with an alias */
1193 char *string; /* remember the string since it may change */
1195 /* Remember last two characters for pungetc. */
1198 /* Number of outstanding calls to pungetc. */
1203 struct parsefile *prev; /* preceding file on stack */
1204 int linno; /* current line */
1205 int pf_fd; /* file descriptor (or -1 if string) */
1206 int left_in_line; /* number of chars left in this line */
1207 int left_in_buffer; /* number of chars left in this buffer past the line */
1208 char *next_to_pgetc; /* next char in buffer */
1209 char *buf; /* input buffer */
1210 struct strpush *strpush; /* for pushing strings at this level */
1211 struct strpush basestrpush; /* so pushing one is fast */
1213 /* Remember last two characters for pungetc. */
1216 /* Number of outstanding calls to pungetc. */
1220 static struct parsefile basepf; /* top level input file */
1221 static struct parsefile *g_parsefile = &basepf; /* current input file */
1222 static int startlinno; /* line # where last token started */
1223 static char *commandname; /* currently executing command */
1224 static struct strlist *cmdenviron; /* environment for builtin command */
1227 /* ============ Message printing */
1230 ash_vmsg(const char *msg, va_list ap)
1232 fprintf(stderr, "%s: ", arg0);
1234 if (strcmp(arg0, commandname))
1235 fprintf(stderr, "%s: ", commandname);
1236 if (!iflag || g_parsefile->pf_fd > 0)
1237 fprintf(stderr, "line %d: ", startlinno);
1239 vfprintf(stderr, msg, ap);
1240 newline_and_flush(stderr);
1244 * Exverror is called to raise the error exception. If the second argument
1245 * is not NULL then error prints an error message using printf style
1246 * formatting. It then raises the error exception.
1248 static void ash_vmsg_and_raise(int, const char *, va_list) NORETURN;
1250 ash_vmsg_and_raise(int cond, const char *msg, va_list ap)
1254 TRACE(("ash_vmsg_and_raise(%d, \"", cond));
1256 TRACE(("\") pid=%d\n", getpid()));
1258 TRACE(("ash_vmsg_and_raise(%d, NULL) pid=%d\n", cond, getpid()));
1263 flush_stdout_stderr();
1264 raise_exception(cond);
1268 static void ash_msg_and_raise_error(const char *, ...) NORETURN;
1270 ash_msg_and_raise_error(const char *msg, ...)
1275 ash_vmsg_and_raise(EXERROR, msg, ap);
1280 static void raise_error_syntax(const char *) NORETURN;
1282 raise_error_syntax(const char *msg)
1284 ash_msg_and_raise_error("syntax error: %s", msg);
1288 static void ash_msg_and_raise(int, const char *, ...) NORETURN;
1290 ash_msg_and_raise(int cond, const char *msg, ...)
1295 ash_vmsg_and_raise(cond, msg, ap);
1301 * error/warning routines for external builtins
1304 ash_msg(const char *fmt, ...)
1314 * Return a string describing an error. The returned string may be a
1315 * pointer to a static buffer that will be overwritten on the next call.
1316 * Action describes the operation that got the error.
1319 errmsg(int e, const char *em)
1321 if (e == ENOENT || e == ENOTDIR) {
1328 /* ============ Memory allocation */
1331 /* I consider these wrappers nearly useless:
1332 * ok, they return you to nearest exception handler, but
1333 * how much memory do you leak in the process, making
1334 * memory starvation worse?
1337 ckrealloc(void * p, size_t nbytes)
1339 p = realloc(p, nbytes);
1341 ash_msg_and_raise_error(bb_msg_memory_exhausted);
1346 ckmalloc(size_t nbytes)
1348 return ckrealloc(NULL, nbytes);
1352 ckzalloc(size_t nbytes)
1354 return memset(ckmalloc(nbytes), 0, nbytes);
1358 ckstrdup(const char *s)
1360 char *p = strdup(s);
1362 ash_msg_and_raise_error(bb_msg_memory_exhausted);
1366 /* Using bbox equivalents. They exit if out of memory */
1367 # define ckrealloc xrealloc
1368 # define ckmalloc xmalloc
1369 # define ckzalloc xzalloc
1370 # define ckstrdup xstrdup
1374 * It appears that grabstackstr() will barf with such alignments
1375 * because stalloc() will return a string allocated in a new stackblock.
1377 #define SHELL_ALIGN(nbytes) (((nbytes) + SHELL_SIZE) & ~SHELL_SIZE)
1379 /* Most machines require the value returned from malloc to be aligned
1380 * in some way. The following macro will get this right
1381 * on many machines. */
1382 SHELL_SIZE = sizeof(union { int i; char *cp; double d; }) - 1,
1383 /* Minimum size of a block */
1384 MINSIZE = SHELL_ALIGN(504),
1387 struct stack_block {
1388 struct stack_block *prev;
1389 char space[MINSIZE];
1393 struct stack_block *stackp;
1399 struct globals_memstack {
1400 struct stack_block *g_stackp; // = &stackbase;
1401 char *g_stacknxt; // = stackbase.space;
1402 char *sstrend; // = stackbase.space + MINSIZE;
1403 size_t g_stacknleft; // = MINSIZE;
1404 int herefd; // = -1;
1405 struct stack_block stackbase;
1407 extern struct globals_memstack *const ash_ptr_to_globals_memstack;
1408 #define G_memstack (*ash_ptr_to_globals_memstack)
1409 #define g_stackp (G_memstack.g_stackp )
1410 #define g_stacknxt (G_memstack.g_stacknxt )
1411 #define sstrend (G_memstack.sstrend )
1412 #define g_stacknleft (G_memstack.g_stacknleft)
1413 #define herefd (G_memstack.herefd )
1414 #define stackbase (G_memstack.stackbase )
1415 #define INIT_G_memstack() do { \
1416 (*(struct globals_memstack**)&ash_ptr_to_globals_memstack) = xzalloc(sizeof(G_memstack)); \
1418 g_stackp = &stackbase; \
1419 g_stacknxt = stackbase.space; \
1420 g_stacknleft = MINSIZE; \
1421 sstrend = stackbase.space + MINSIZE; \
1426 #define stackblock() ((void *)g_stacknxt)
1427 #define stackblocksize() g_stacknleft
1430 * Parse trees for commands are allocated in lifo order, so we use a stack
1431 * to make this more efficient, and also to avoid all sorts of exception
1432 * handling code to handle interrupts in the middle of a parse.
1434 * The size 504 was chosen because the Ultrix malloc handles that size
1438 stalloc(size_t nbytes)
1443 aligned = SHELL_ALIGN(nbytes);
1444 if (aligned > g_stacknleft) {
1447 struct stack_block *sp;
1449 blocksize = aligned;
1450 if (blocksize < MINSIZE)
1451 blocksize = MINSIZE;
1452 len = sizeof(struct stack_block) - MINSIZE + blocksize;
1453 if (len < blocksize)
1454 ash_msg_and_raise_error(bb_msg_memory_exhausted);
1457 sp->prev = g_stackp;
1458 g_stacknxt = sp->space;
1459 g_stacknleft = blocksize;
1460 sstrend = g_stacknxt + blocksize;
1465 g_stacknxt += aligned;
1466 g_stacknleft -= aligned;
1471 stzalloc(size_t nbytes)
1473 return memset(stalloc(nbytes), 0, nbytes);
1480 if (!p || (g_stacknxt < (char *)p) || ((char *)p < g_stackp->space)) {
1481 write(STDERR_FILENO, "stunalloc\n", 10);
1485 g_stacknleft += g_stacknxt - (char *)p;
1490 * Like strdup but works with the ash stack.
1493 sstrdup(const char *p)
1495 size_t len = strlen(p) + 1;
1496 return memcpy(stalloc(len), p, len);
1500 grabstackblock(size_t len)
1502 len = SHELL_ALIGN(len);
1504 g_stacknleft -= len;
1508 pushstackmark(struct stackmark *mark, size_t len)
1510 mark->stackp = g_stackp;
1511 mark->stacknxt = g_stacknxt;
1512 mark->stacknleft = g_stacknleft;
1513 grabstackblock(len);
1517 setstackmark(struct stackmark *mark)
1519 pushstackmark(mark, g_stacknxt == g_stackp->space && g_stackp != &stackbase);
1523 popstackmark(struct stackmark *mark)
1525 struct stack_block *sp;
1531 while (g_stackp != mark->stackp) {
1533 g_stackp = sp->prev;
1536 g_stacknxt = mark->stacknxt;
1537 g_stacknleft = mark->stacknleft;
1538 sstrend = mark->stacknxt + mark->stacknleft;
1543 * When the parser reads in a string, it wants to stick the string on the
1544 * stack and only adjust the stack pointer when it knows how big the
1545 * string is. Stackblock (defined in stack.h) returns a pointer to a block
1546 * of space on top of the stack and stackblocklen returns the length of
1547 * this block. Growstackblock will grow this space by at least one byte,
1548 * possibly moving it (like realloc). Grabstackblock actually allocates the
1549 * part of the block that has been used.
1552 growstackblock(void)
1556 newlen = g_stacknleft * 2;
1557 if (newlen < g_stacknleft)
1558 ash_msg_and_raise_error(bb_msg_memory_exhausted);
1562 if (g_stacknxt == g_stackp->space && g_stackp != &stackbase) {
1563 struct stack_block *sp;
1564 struct stack_block *prevstackp;
1569 prevstackp = sp->prev;
1570 grosslen = newlen + sizeof(struct stack_block) - MINSIZE;
1571 sp = ckrealloc(sp, grosslen);
1572 sp->prev = prevstackp;
1574 g_stacknxt = sp->space;
1575 g_stacknleft = newlen;
1576 sstrend = sp->space + newlen;
1579 char *oldspace = g_stacknxt;
1580 size_t oldlen = g_stacknleft;
1581 char *p = stalloc(newlen);
1583 /* free the space we just allocated */
1584 g_stacknxt = memcpy(p, oldspace, oldlen);
1585 g_stacknleft += newlen;
1590 * The following routines are somewhat easier to use than the above.
1591 * The user declares a variable of type STACKSTR, which may be declared
1592 * to be a register. The macro STARTSTACKSTR initializes things. Then
1593 * the user uses the macro STPUTC to add characters to the string. In
1594 * effect, STPUTC(c, p) is the same as *p++ = c except that the stack is
1595 * grown as necessary. When the user is done, she can just leave the
1596 * string there and refer to it using stackblock(). Or she can allocate
1597 * the space for it using grabstackstr(). If it is necessary to allow
1598 * someone else to use the stack temporarily and then continue to grow
1599 * the string, the user should use grabstack to allocate the space, and
1600 * then call ungrabstr(p) to return to the previous mode of operation.
1602 * USTPUTC is like STPUTC except that it doesn't check for overflow.
1603 * CHECKSTACKSPACE can be called before USTPUTC to ensure that there
1604 * is space for at least one character.
1609 size_t len = stackblocksize();
1610 if (herefd >= 0 && len >= 1024) {
1611 full_write(herefd, stackblock(), len);
1612 return stackblock();
1615 return (char *)stackblock() + len;
1619 * Called from CHECKSTRSPACE.
1622 makestrspace(size_t newlen, char *p)
1624 size_t len = p - g_stacknxt;
1630 size = stackblocksize();
1632 if (nleft >= newlen)
1636 return (char *)stackblock() + len;
1640 stack_nputstr(const char *s, size_t n, char *p)
1642 p = makestrspace(n, p);
1643 p = (char *)memcpy(p, s, n) + n;
1648 stack_putstr(const char *s, char *p)
1650 return stack_nputstr(s, strlen(s), p);
1654 _STPUTC(int c, char *p)
1662 #define STARTSTACKSTR(p) ((p) = stackblock())
1663 #define STPUTC(c, p) ((p) = _STPUTC((c), (p)))
1664 #define CHECKSTRSPACE(n, p) do { \
1667 size_t m = sstrend - q; \
1669 (p) = makestrspace(l, q); \
1671 #define USTPUTC(c, p) (*(p)++ = (c))
1672 #define STACKSTRNUL(p) do { \
1673 if ((p) == sstrend) \
1674 (p) = growstackstr(); \
1677 #define STUNPUTC(p) (--(p))
1678 #define STTOPC(p) ((p)[-1])
1679 #define STADJUST(amount, p) ((p) += (amount))
1681 #define grabstackstr(p) stalloc((char *)(p) - (char *)stackblock())
1682 #define ungrabstackstr(s, p) stunalloc(s)
1683 #define stackstrend() ((void *)sstrend)
1686 /* ============ String helpers */
1689 * prefix -- see if pfx is a prefix of string.
1692 prefix(const char *string, const char *pfx)
1695 if (*pfx++ != *string++)
1698 return (char *) string;
1702 * Check for a valid number. This should be elsewhere.
1705 is_number(const char *p)
1710 } while (*++p != '\0');
1715 * Convert a string of digits to an integer, printing an error message on
1719 number(const char *s)
1722 ash_msg_and_raise_error(msg_illnum, s);
1727 * Produce a possibly single quoted string suitable as input to the shell.
1728 * The return string is allocated on the stack.
1731 single_quote(const char *s)
1741 len = strchrnul(s, '\'') - s;
1743 q = p = makestrspace(len + 3, p);
1746 q = (char *)memcpy(q, s, len) + len;
1755 do len++; while (*++s == '\'');
1757 q = p = makestrspace(len + 3, p);
1760 q = (char *)memcpy(q, s - len, len) + len;
1768 return stackblock();
1772 /* ============ nextopt */
1774 static char **argptr; /* argument list for builtin commands */
1775 static char *optionarg; /* set by nextopt (like getopt) */
1776 static char *optptr; /* used by nextopt */
1779 * XXX - should get rid of. Have all builtins use getopt(3).
1780 * The library getopt must have the BSD extension static variable
1781 * "optreset", otherwise it can't be used within the shell safely.
1783 * Standard option processing (a la getopt) for builtin routines.
1784 * The only argument that is passed to nextopt is the option string;
1785 * the other arguments are unnecessary. It returns the character,
1786 * or '\0' on end of input.
1789 nextopt(const char *optstring)
1796 if (p == NULL || *p == '\0') {
1797 /* We ate entire "-param", take next one */
1803 if (*++p == '\0') /* just "-" ? */
1806 if (LONE_DASH(p)) /* "--" ? */
1808 /* p => next "-param" */
1810 /* p => some option char in the middle of a "-param" */
1812 for (q = optstring; *q != c;) {
1814 ash_msg_and_raise_error("illegal option -%c", c);
1822 ash_msg_and_raise_error("no arg for -%c option", c);
1832 /* ============ Shell variables */
1835 * The parsefile structure pointed to by the global variable parsefile
1836 * contains information about the current file being read.
1839 int nparam; /* # of positional parameters (without $0) */
1840 #if ENABLE_ASH_GETOPTS
1841 int optind; /* next parameter to be processed by getopts */
1842 int optoff; /* used by getopts */
1844 unsigned char malloced; /* if parameter list dynamically allocated */
1845 char **p; /* parameter list */
1849 * Free the list of positional parameters.
1852 freeparam(volatile struct shparam *param)
1854 if (param->malloced) {
1856 ap = ap1 = param->p;
1863 #if ENABLE_ASH_GETOPTS
1864 static void FAST_FUNC getoptsreset(const char *value);
1868 struct var *next; /* next entry in hash list */
1869 int flags; /* flags are defined above */
1870 const char *var_text; /* name=value */
1871 void (*var_func)(const char *) FAST_FUNC; /* function to be called when */
1872 /* the variable gets set/unset */
1876 struct localvar *next; /* next local variable in list */
1877 struct var *vp; /* the variable that was made local */
1878 int flags; /* saved flags */
1879 const char *text; /* saved text */
1883 #define VEXPORT 0x01 /* variable is exported */
1884 #define VREADONLY 0x02 /* variable cannot be modified */
1885 #define VSTRFIXED 0x04 /* variable struct is statically allocated */
1886 #define VTEXTFIXED 0x08 /* text is statically allocated */
1887 #define VSTACK 0x10 /* text is allocated on the stack */
1888 #define VUNSET 0x20 /* the variable is not set */
1889 #define VNOFUNC 0x40 /* don't call the callback function */
1890 #define VNOSET 0x80 /* do not set variable - just readonly test */
1891 #define VNOSAVE 0x100 /* when text is on the heap before setvareq */
1892 #if ENABLE_ASH_RANDOM_SUPPORT
1893 # define VDYNAMIC 0x200 /* dynamic variable */
1899 /* Need to be before varinit_data[] */
1900 #if ENABLE_LOCALE_SUPPORT
1901 static void FAST_FUNC
1902 change_lc_all(const char *value)
1904 if (value && *value != '\0')
1905 setlocale(LC_ALL, value);
1907 static void FAST_FUNC
1908 change_lc_ctype(const char *value)
1910 if (value && *value != '\0')
1911 setlocale(LC_CTYPE, value);
1915 static void chkmail(void);
1916 static void changemail(const char *var_value) FAST_FUNC;
1918 # define chkmail() ((void)0)
1920 static void changepath(const char *) FAST_FUNC;
1921 #if ENABLE_ASH_RANDOM_SUPPORT
1922 static void change_random(const char *) FAST_FUNC;
1925 static const struct {
1927 const char *var_text;
1928 void (*var_func)(const char *) FAST_FUNC;
1929 } varinit_data[] = {
1931 * Note: VEXPORT would not work correctly here for NOFORK applets:
1932 * some environment strings may be constant.
1934 { VSTRFIXED|VTEXTFIXED , defifsvar , NULL },
1936 { VSTRFIXED|VTEXTFIXED|VUNSET, "MAIL" , changemail },
1937 { VSTRFIXED|VTEXTFIXED|VUNSET, "MAILPATH" , changemail },
1939 { VSTRFIXED|VTEXTFIXED , bb_PATH_root_path, changepath },
1940 { VSTRFIXED|VTEXTFIXED , "PS1=$ " , NULL },
1941 { VSTRFIXED|VTEXTFIXED , "PS2=> " , NULL },
1942 { VSTRFIXED|VTEXTFIXED , "PS4=+ " , NULL },
1943 #if ENABLE_ASH_GETOPTS
1944 { VSTRFIXED|VTEXTFIXED , defoptindvar, getoptsreset },
1946 #if ENABLE_ASH_RANDOM_SUPPORT
1947 { VSTRFIXED|VTEXTFIXED|VUNSET|VDYNAMIC, "RANDOM", change_random },
1949 #if ENABLE_LOCALE_SUPPORT
1950 { VSTRFIXED|VTEXTFIXED|VUNSET, "LC_ALL" , change_lc_all },
1951 { VSTRFIXED|VTEXTFIXED|VUNSET, "LC_CTYPE" , change_lc_ctype },
1953 #if ENABLE_FEATURE_EDITING_SAVEHISTORY
1954 { VSTRFIXED|VTEXTFIXED|VUNSET, "HISTFILE" , NULL },
1960 struct globals_var {
1961 struct shparam shellparam; /* $@ current positional parameters */
1962 struct redirtab *redirlist;
1964 int preverrout_fd; /* save fd2 before print debug if xflag is set. */
1965 struct var *vartab[VTABSIZE];
1966 struct var varinit[ARRAY_SIZE(varinit_data)];
1968 extern struct globals_var *const ash_ptr_to_globals_var;
1969 #define G_var (*ash_ptr_to_globals_var)
1970 #define shellparam (G_var.shellparam )
1971 //#define redirlist (G_var.redirlist )
1972 #define g_nullredirs (G_var.g_nullredirs )
1973 #define preverrout_fd (G_var.preverrout_fd)
1974 #define vartab (G_var.vartab )
1975 #define varinit (G_var.varinit )
1976 #define INIT_G_var() do { \
1978 (*(struct globals_var**)&ash_ptr_to_globals_var) = xzalloc(sizeof(G_var)); \
1980 for (i = 0; i < ARRAY_SIZE(varinit_data); i++) { \
1981 varinit[i].flags = varinit_data[i].flags; \
1982 varinit[i].var_text = varinit_data[i].var_text; \
1983 varinit[i].var_func = varinit_data[i].var_func; \
1987 #define vifs varinit[0]
1989 # define vmail (&vifs)[1]
1990 # define vmpath (&vmail)[1]
1991 # define vpath (&vmpath)[1]
1993 # define vpath (&vifs)[1]
1995 #define vps1 (&vpath)[1]
1996 #define vps2 (&vps1)[1]
1997 #define vps4 (&vps2)[1]
1998 #if ENABLE_ASH_GETOPTS
1999 # define voptind (&vps4)[1]
2000 # if ENABLE_ASH_RANDOM_SUPPORT
2001 # define vrandom (&voptind)[1]
2004 # if ENABLE_ASH_RANDOM_SUPPORT
2005 # define vrandom (&vps4)[1]
2010 * The following macros access the values of the above variables.
2011 * They have to skip over the name. They return the null string
2012 * for unset variables.
2014 #define ifsval() (vifs.var_text + 4)
2015 #define ifsset() ((vifs.flags & VUNSET) == 0)
2017 # define mailval() (vmail.var_text + 5)
2018 # define mpathval() (vmpath.var_text + 9)
2019 # define mpathset() ((vmpath.flags & VUNSET) == 0)
2021 #define pathval() (vpath.var_text + 5)
2022 #define ps1val() (vps1.var_text + 4)
2023 #define ps2val() (vps2.var_text + 4)
2024 #define ps4val() (vps4.var_text + 4)
2025 #if ENABLE_ASH_GETOPTS
2026 # define optindval() (voptind.var_text + 7)
2029 #if ENABLE_ASH_GETOPTS
2030 static void FAST_FUNC
2031 getoptsreset(const char *value)
2033 shellparam.optind = number(value);
2034 shellparam.optoff = -1;
2039 * Compares two strings up to the first = or '\0'. The first
2040 * string must be terminated by '='; the second may be terminated by
2041 * either '=' or '\0'.
2044 varcmp(const char *p, const char *q)
2048 while ((c = *p) == (d = *q)) {
2049 if (c == '\0' || c == '=')
2063 * Find the appropriate entry in the hash table from the name.
2065 static struct var **
2066 hashvar(const char *p)
2070 hashval = ((unsigned char) *p) << 4;
2071 while (*p && *p != '=')
2072 hashval += (unsigned char) *p++;
2073 return &vartab[hashval % VTABSIZE];
2077 vpcmp(const void *a, const void *b)
2079 return varcmp(*(const char **)a, *(const char **)b);
2083 * This routine initializes the builtin variables.
2093 * PS1 depends on uid
2095 #if ENABLE_FEATURE_EDITING && ENABLE_FEATURE_EDITING_FANCY_PROMPT
2096 vps1.var_text = "PS1=\\w \\$ ";
2099 vps1.var_text = "PS1=# ";
2102 end = vp + ARRAY_SIZE(varinit);
2104 vpp = hashvar(vp->var_text);
2107 } while (++vp < end);
2110 static struct var **
2111 findvar(struct var **vpp, const char *name)
2113 for (; *vpp; vpp = &(*vpp)->next) {
2114 if (varcmp((*vpp)->var_text, name) == 0) {
2122 * Find the value of a variable. Returns NULL if not set.
2124 static const char* FAST_FUNC
2125 lookupvar(const char *name)
2129 v = *findvar(hashvar(name), name);
2131 #if ENABLE_ASH_RANDOM_SUPPORT
2133 * Dynamic variables are implemented roughly the same way they are
2134 * in bash. Namely, they're "special" so long as they aren't unset.
2135 * As soon as they're unset, they're no longer dynamic, and dynamic
2136 * lookup will no longer happen at that point. -- PFM.
2138 if (v->flags & VDYNAMIC)
2141 if (!(v->flags & VUNSET))
2142 return var_end(v->var_text);
2147 static void reinit_unicode_for_ash(void)
2149 /* Unicode support should be activated even if LANG is set
2150 * _during_ shell execution, not only if it was set when
2151 * shell was started. Therefore, re-check LANG every time:
2153 if (ENABLE_FEATURE_CHECK_UNICODE_IN_ENV
2154 || ENABLE_UNICODE_USING_LOCALE
2156 const char *s = lookupvar("LC_ALL");
2157 if (!s) s = lookupvar("LC_CTYPE");
2158 if (!s) s = lookupvar("LANG");
2164 * Search the environment of a builtin command.
2167 bltinlookup(const char *name)
2171 for (sp = cmdenviron; sp; sp = sp->next) {
2172 if (varcmp(sp->text, name) == 0)
2173 return var_end(sp->text);
2175 return lookupvar(name);
2179 * Same as setvar except that the variable and value are passed in
2180 * the first argument as name=value. Since the first argument will
2181 * be actually stored in the table, it should not be a string that
2183 * Called with interrupts off.
2186 setvareq(char *s, int flags)
2188 struct var *vp, **vpp;
2191 flags |= (VEXPORT & (((unsigned) (1 - aflag)) - 1));
2192 vp = *findvar(vpp, s);
2194 if ((vp->flags & (VREADONLY|VDYNAMIC)) == VREADONLY) {
2197 if (flags & VNOSAVE)
2200 ash_msg_and_raise_error("%.*s: is read only", strchrnul(n, '=') - n, n);
2206 if (vp->var_func && !(flags & VNOFUNC))
2207 vp->var_func(var_end(s));
2209 if (!(vp->flags & (VTEXTFIXED|VSTACK)))
2210 free((char*)vp->var_text);
2212 flags |= vp->flags & ~(VTEXTFIXED|VSTACK|VNOSAVE|VUNSET);
2214 /* variable s is not found */
2217 vp = ckzalloc(sizeof(*vp));
2219 /*vp->func = NULL; - ckzalloc did it */
2222 if (!(flags & (VTEXTFIXED|VSTACK|VNOSAVE)))
2229 * Set the value of a variable. The flags argument is ored with the
2230 * flags of the variable. If val is NULL, the variable is unset.
2233 setvar(const char *name, const char *val, int flags)
2241 q = endofname(name);
2242 p = strchrnul(q, '=');
2244 if (!namelen || p != q)
2245 ash_msg_and_raise_error("%.*s: bad variable name", namelen, name);
2250 vallen = strlen(val);
2254 nameeq = ckmalloc(namelen + vallen + 2);
2255 p = memcpy(nameeq, name, namelen) + namelen;
2258 p = memcpy(p, val, vallen) + vallen;
2261 setvareq(nameeq, flags | VNOSAVE);
2265 static void FAST_FUNC
2266 setvar0(const char *name, const char *val)
2268 setvar(name, val, 0);
2271 #if ENABLE_ASH_GETOPTS
2273 * Safe version of setvar, returns 1 on success 0 on failure.
2276 setvarsafe(const char *name, const char *val, int flags)
2279 volatile int saveint;
2280 struct jmploc *volatile savehandler = exception_handler;
2281 struct jmploc jmploc;
2284 if (setjmp(jmploc.loc))
2287 exception_handler = &jmploc;
2288 setvar(name, val, flags);
2291 exception_handler = savehandler;
2292 RESTORE_INT(saveint);
2298 * Unset the specified variable.
2301 unsetvar(const char *s)
2307 vpp = findvar(hashvar(s), s);
2311 int flags = vp->flags;
2314 if (flags & VREADONLY)
2316 #if ENABLE_ASH_RANDOM_SUPPORT
2317 vp->flags &= ~VDYNAMIC;
2321 if ((flags & VSTRFIXED) == 0) {
2323 if ((flags & (VTEXTFIXED|VSTACK)) == 0)
2324 free((char*)vp->var_text);
2330 vp->flags &= ~VEXPORT;
2340 * Process a linked list of variable assignments.
2343 listsetvar(struct strlist *list_set_var, int flags)
2345 struct strlist *lp = list_set_var;
2351 setvareq(lp->text, flags);
2358 * Generate a list of variables satisfying the given conditions.
2361 listvars(int on, int off, char ***end)
2372 for (vp = *vpp; vp; vp = vp->next) {
2373 if ((vp->flags & mask) == on) {
2374 if (ep == stackstrend())
2375 ep = growstackstr();
2376 *ep++ = (char*)vp->var_text;
2379 } while (++vpp < vartab + VTABSIZE);
2380 if (ep == stackstrend())
2381 ep = growstackstr();
2385 return grabstackstr(ep);
2389 /* ============ Path search helper
2391 * The variable path (passed by reference) should be set to the start
2392 * of the path before the first call; path_advance will update
2393 * this value as it proceeds. Successive calls to path_advance will return
2394 * the possible path expansions in sequence. If an option (indicated by
2395 * a percent sign) appears in the path entry then the global variable
2396 * pathopt will be set to point to it; otherwise pathopt will be set to
2399 static const char *pathopt; /* set by path_advance */
2402 path_advance(const char **path, const char *name)
2412 for (p = start; *p && *p != ':' && *p != '%'; p++)
2414 len = p - start + strlen(name) + 2; /* "2" is for '/' and '\0' */
2415 while (stackblocksize() < len)
2419 memcpy(q, start, p - start);
2427 while (*p && *p != ':')
2434 return stalloc(len);
2438 /* ============ Prompt */
2440 static smallint doprompt; /* if set, prompt the user */
2441 static smallint needprompt; /* true if interactive and at start of line */
2443 #if ENABLE_FEATURE_EDITING
2444 static line_input_t *line_input_state;
2445 static const char *cmdedit_prompt;
2447 putprompt(const char *s)
2449 if (ENABLE_ASH_EXPAND_PRMT) {
2450 free((char*)cmdedit_prompt);
2451 cmdedit_prompt = ckstrdup(s);
2458 putprompt(const char *s)
2464 #if ENABLE_ASH_EXPAND_PRMT
2465 /* expandstr() needs parsing machinery, so it is far away ahead... */
2466 static const char *expandstr(const char *ps);
2468 #define expandstr(s) s
2472 setprompt_if(smallint do_set, int whichprompt)
2475 IF_ASH_EXPAND_PRMT(struct stackmark smark;)
2482 switch (whichprompt) {
2492 #if ENABLE_ASH_EXPAND_PRMT
2493 pushstackmark(&smark, stackblocksize());
2495 putprompt(expandstr(prompt));
2496 #if ENABLE_ASH_EXPAND_PRMT
2497 popstackmark(&smark);
2502 /* ============ The cd and pwd commands */
2504 #define CD_PHYSICAL 1
2514 while ((i = nextopt("LP")) != '\0') {
2516 flags ^= CD_PHYSICAL;
2525 * Update curdir (the name of the current directory) in response to a
2529 updatepwd(const char *dir)
2536 cdcomppath = sstrdup(dir);
2539 if (curdir == nullstr)
2541 new = stack_putstr(curdir, new);
2543 new = makestrspace(strlen(dir) + 2, new);
2544 lim = (char *)stackblock() + 1;
2548 if (new > lim && *lim == '/')
2553 if (dir[1] == '/' && dir[2] != '/') {
2559 p = strtok(cdcomppath, "/");
2563 if (p[1] == '.' && p[2] == '\0') {
2575 new = stack_putstr(p, new);
2578 p = strtok(NULL, "/");
2583 return stackblock();
2587 * Find out what the current directory is. If we already know the current
2588 * directory, this routine returns immediately.
2593 char *dir = getcwd(NULL, 0); /* huh, using glibc extension? */
2594 return dir ? dir : nullstr;
2598 setpwd(const char *val, int setold)
2602 oldcur = dir = curdir;
2605 setvar("OLDPWD", oldcur, VEXPORT);
2608 if (physdir != nullstr) {
2609 if (physdir != oldcur)
2613 if (oldcur == val || !val) {
2619 dir = ckstrdup(val);
2620 if (oldcur != dir && oldcur != nullstr) {
2625 setvar("PWD", dir, VEXPORT);
2628 static void hashcd(void);
2631 * Actually do the chdir. We also call hashcd to let the routines in exec.c
2632 * know that the current directory has changed.
2635 docd(const char *dest, int flags)
2637 const char *dir = NULL;
2640 TRACE(("docd(\"%s\", %d) called\n", dest, flags));
2643 if (!(flags & CD_PHYSICAL)) {
2644 dir = updatepwd(dest);
2658 static int FAST_FUNC
2659 cdcmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
2671 dest = bltinlookup("HOME");
2672 else if (LONE_DASH(dest)) {
2673 dest = bltinlookup("OLDPWD");
2695 path = bltinlookup("CDPATH");
2704 p = path_advance(&path, dest);
2705 if (stat(p, &statb) >= 0 && S_ISDIR(statb.st_mode)) {
2709 if (!docd(p, flags))
2714 ash_msg_and_raise_error("can't cd to %s", dest);
2717 if (flags & CD_PRINT)
2718 out1fmt("%s\n", curdir);
2722 static int FAST_FUNC
2723 pwdcmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
2726 const char *dir = curdir;
2730 if (physdir == nullstr)
2734 out1fmt("%s\n", dir);
2739 /* ============ ... */
2742 #define IBUFSIZ (ENABLE_FEATURE_EDITING ? CONFIG_FEATURE_EDITING_MAX_LEN : 1024)
2744 /* Syntax classes */
2745 #define CWORD 0 /* character is nothing special */
2746 #define CNL 1 /* newline character */
2747 #define CBACK 2 /* a backslash character */
2748 #define CSQUOTE 3 /* single quote */
2749 #define CDQUOTE 4 /* double quote */
2750 #define CENDQUOTE 5 /* a terminating quote */
2751 #define CBQUOTE 6 /* backwards single quote */
2752 #define CVAR 7 /* a dollar sign */
2753 #define CENDVAR 8 /* a '}' character */
2754 #define CLP 9 /* a left paren in arithmetic */
2755 #define CRP 10 /* a right paren in arithmetic */
2756 #define CENDFILE 11 /* end of file */
2757 #define CCTL 12 /* like CWORD, except it must be escaped */
2758 #define CSPCL 13 /* these terminate a word */
2759 #define CIGN 14 /* character should be ignored */
2762 #if ENABLE_ASH_ALIAS
2766 #define USE_SIT_FUNCTION ENABLE_ASH_OPTIMIZE_FOR_SIZE
2768 #if ENABLE_SH_MATH_SUPPORT
2769 # define SIT_ITEM(a,b,c,d) (a | (b << 4) | (c << 8) | (d << 12))
2771 # define SIT_ITEM(a,b,c,d) (a | (b << 4) | (c << 8))
2773 static const uint16_t S_I_T[] ALIGN2 = {
2774 #if ENABLE_ASH_ALIAS
2775 SIT_ITEM(CSPCL , CIGN , CIGN , CIGN ), /* 0, PEOA */
2777 SIT_ITEM(CSPCL , CWORD , CWORD, CWORD ), /* 1, ' ' */
2778 SIT_ITEM(CNL , CNL , CNL , CNL ), /* 2, \n */
2779 SIT_ITEM(CWORD , CCTL , CCTL , CWORD ), /* 3, !*-/:=?[]~ */
2780 SIT_ITEM(CDQUOTE , CENDQUOTE, CWORD, CWORD ), /* 4, '"' */
2781 SIT_ITEM(CVAR , CVAR , CWORD, CVAR ), /* 5, $ */
2782 SIT_ITEM(CSQUOTE , CWORD , CENDQUOTE, CWORD), /* 6, "'" */
2783 SIT_ITEM(CSPCL , CWORD , CWORD, CLP ), /* 7, ( */
2784 SIT_ITEM(CSPCL , CWORD , CWORD, CRP ), /* 8, ) */
2785 SIT_ITEM(CBACK , CBACK , CCTL , CBACK ), /* 9, \ */
2786 SIT_ITEM(CBQUOTE , CBQUOTE , CWORD, CBQUOTE), /* 10, ` */
2787 SIT_ITEM(CENDVAR , CENDVAR , CWORD, CENDVAR), /* 11, } */
2788 #if !USE_SIT_FUNCTION
2789 SIT_ITEM(CENDFILE, CENDFILE , CENDFILE, CENDFILE),/* 12, PEOF */
2790 SIT_ITEM(CWORD , CWORD , CWORD, CWORD ), /* 13, 0-9A-Za-z */
2791 SIT_ITEM(CCTL , CCTL , CCTL , CCTL ) /* 14, CTLESC ... */
2795 /* Constants below must match table above */
2797 #if ENABLE_ASH_ALIAS
2798 CSPCL_CIGN_CIGN_CIGN , /* 0 */
2800 CSPCL_CWORD_CWORD_CWORD , /* 1 */
2801 CNL_CNL_CNL_CNL , /* 2 */
2802 CWORD_CCTL_CCTL_CWORD , /* 3 */
2803 CDQUOTE_CENDQUOTE_CWORD_CWORD , /* 4 */
2804 CVAR_CVAR_CWORD_CVAR , /* 5 */
2805 CSQUOTE_CWORD_CENDQUOTE_CWORD , /* 6 */
2806 CSPCL_CWORD_CWORD_CLP , /* 7 */
2807 CSPCL_CWORD_CWORD_CRP , /* 8 */
2808 CBACK_CBACK_CCTL_CBACK , /* 9 */
2809 CBQUOTE_CBQUOTE_CWORD_CBQUOTE , /* 10 */
2810 CENDVAR_CENDVAR_CWORD_CENDVAR , /* 11 */
2811 CENDFILE_CENDFILE_CENDFILE_CENDFILE, /* 12 */
2812 CWORD_CWORD_CWORD_CWORD , /* 13 */
2813 CCTL_CCTL_CCTL_CCTL , /* 14 */
2816 /* c in SIT(c, syntax) must be an *unsigned char* or PEOA or PEOF,
2817 * caller must ensure proper cast on it if c is *char_ptr!
2819 /* Values for syntax param */
2820 #define BASESYNTAX 0 /* not in quotes */
2821 #define DQSYNTAX 1 /* in double quotes */
2822 #define SQSYNTAX 2 /* in single quotes */
2823 #define ARISYNTAX 3 /* in arithmetic */
2824 #define PSSYNTAX 4 /* prompt. never passed to SIT() */
2826 #if USE_SIT_FUNCTION
2829 SIT(int c, int syntax)
2831 /* Used to also have '/' in this string: "\t\n !\"$&'()*-/:;<=>?[\\]`|}~" */
2832 static const char spec_symbls[] ALIGN1 = "\t\n !\"$&'()*-:;<=>?[\\]`|}~";
2834 * This causes '/' to be prepended with CTLESC in dquoted string,
2835 * making "./file"* treated incorrectly because we feed
2836 * ".\/file*" string to glob(), confusing it (see expandmeta func).
2837 * The "homegrown" glob implementation is okay with that,
2838 * but glibc one isn't. With '/' always treated as CWORD,
2841 # if ENABLE_ASH_ALIAS
2842 static const uint8_t syntax_index_table[] ALIGN1 = {
2843 1, 2, 1, 3, 4, 5, 1, 6, /* "\t\n !\"$&'" */
2844 7, 8, 3, 3,/*3,*/3, 1, 1, /* "()*-/:;<" */
2845 3, 1, 3, 3, 9, 3, 10, 1, /* "=>?[\\]`|" */
2849 static const uint8_t syntax_index_table[] ALIGN1 = {
2850 0, 1, 0, 2, 3, 4, 0, 5, /* "\t\n !\"$&'" */
2851 6, 7, 2, 2,/*2,*/2, 0, 0, /* "()*-/:;<" */
2852 2, 0, 2, 2, 8, 2, 9, 0, /* "=>?[\\]`|" */
2861 # if ENABLE_ASH_ALIAS
2867 /* Cast is purely for paranoia here,
2868 * just in case someone passed signed char to us */
2869 if ((unsigned char)c >= CTL_FIRST
2870 && (unsigned char)c <= CTL_LAST
2874 s = strchrnul(spec_symbls, c);
2877 indx = syntax_index_table[s - spec_symbls];
2879 return (S_I_T[indx] >> (syntax*4)) & 0xf;
2882 #else /* !USE_SIT_FUNCTION */
2884 static const uint8_t syntax_index_table[] ALIGN1 = {
2885 /* BASESYNTAX_DQSYNTAX_SQSYNTAX_ARISYNTAX */
2886 /* 0 */ CWORD_CWORD_CWORD_CWORD,
2887 /* 1 */ CWORD_CWORD_CWORD_CWORD,
2888 /* 2 */ CWORD_CWORD_CWORD_CWORD,
2889 /* 3 */ CWORD_CWORD_CWORD_CWORD,
2890 /* 4 */ CWORD_CWORD_CWORD_CWORD,
2891 /* 5 */ CWORD_CWORD_CWORD_CWORD,
2892 /* 6 */ CWORD_CWORD_CWORD_CWORD,
2893 /* 7 */ CWORD_CWORD_CWORD_CWORD,
2894 /* 8 */ CWORD_CWORD_CWORD_CWORD,
2895 /* 9 "\t" */ CSPCL_CWORD_CWORD_CWORD,
2896 /* 10 "\n" */ CNL_CNL_CNL_CNL,
2897 /* 11 */ CWORD_CWORD_CWORD_CWORD,
2898 /* 12 */ CWORD_CWORD_CWORD_CWORD,
2899 /* 13 */ CWORD_CWORD_CWORD_CWORD,
2900 /* 14 */ CWORD_CWORD_CWORD_CWORD,
2901 /* 15 */ CWORD_CWORD_CWORD_CWORD,
2902 /* 16 */ CWORD_CWORD_CWORD_CWORD,
2903 /* 17 */ CWORD_CWORD_CWORD_CWORD,
2904 /* 18 */ CWORD_CWORD_CWORD_CWORD,
2905 /* 19 */ CWORD_CWORD_CWORD_CWORD,
2906 /* 20 */ CWORD_CWORD_CWORD_CWORD,
2907 /* 21 */ CWORD_CWORD_CWORD_CWORD,
2908 /* 22 */ CWORD_CWORD_CWORD_CWORD,
2909 /* 23 */ CWORD_CWORD_CWORD_CWORD,
2910 /* 24 */ CWORD_CWORD_CWORD_CWORD,
2911 /* 25 */ CWORD_CWORD_CWORD_CWORD,
2912 /* 26 */ CWORD_CWORD_CWORD_CWORD,
2913 /* 27 */ CWORD_CWORD_CWORD_CWORD,
2914 /* 28 */ CWORD_CWORD_CWORD_CWORD,
2915 /* 29 */ CWORD_CWORD_CWORD_CWORD,
2916 /* 30 */ CWORD_CWORD_CWORD_CWORD,
2917 /* 31 */ CWORD_CWORD_CWORD_CWORD,
2918 /* 32 " " */ CSPCL_CWORD_CWORD_CWORD,
2919 /* 33 "!" */ CWORD_CCTL_CCTL_CWORD,
2920 /* 34 """ */ CDQUOTE_CENDQUOTE_CWORD_CWORD,
2921 /* 35 "#" */ CWORD_CWORD_CWORD_CWORD,
2922 /* 36 "$" */ CVAR_CVAR_CWORD_CVAR,
2923 /* 37 "%" */ CWORD_CWORD_CWORD_CWORD,
2924 /* 38 "&" */ CSPCL_CWORD_CWORD_CWORD,
2925 /* 39 "'" */ CSQUOTE_CWORD_CENDQUOTE_CWORD,
2926 /* 40 "(" */ CSPCL_CWORD_CWORD_CLP,
2927 /* 41 ")" */ CSPCL_CWORD_CWORD_CRP,
2928 /* 42 "*" */ CWORD_CCTL_CCTL_CWORD,
2929 /* 43 "+" */ CWORD_CWORD_CWORD_CWORD,
2930 /* 44 "," */ CWORD_CWORD_CWORD_CWORD,
2931 /* 45 "-" */ CWORD_CCTL_CCTL_CWORD,
2932 /* 46 "." */ CWORD_CWORD_CWORD_CWORD,
2933 /* "/" was CWORD_CCTL_CCTL_CWORD, see comment in SIT() function why this is changed: */
2934 /* 47 "/" */ CWORD_CWORD_CWORD_CWORD,
2935 /* 48 "0" */ CWORD_CWORD_CWORD_CWORD,
2936 /* 49 "1" */ CWORD_CWORD_CWORD_CWORD,
2937 /* 50 "2" */ CWORD_CWORD_CWORD_CWORD,
2938 /* 51 "3" */ CWORD_CWORD_CWORD_CWORD,
2939 /* 52 "4" */ CWORD_CWORD_CWORD_CWORD,
2940 /* 53 "5" */ CWORD_CWORD_CWORD_CWORD,
2941 /* 54 "6" */ CWORD_CWORD_CWORD_CWORD,
2942 /* 55 "7" */ CWORD_CWORD_CWORD_CWORD,
2943 /* 56 "8" */ CWORD_CWORD_CWORD_CWORD,
2944 /* 57 "9" */ CWORD_CWORD_CWORD_CWORD,
2945 /* 58 ":" */ CWORD_CCTL_CCTL_CWORD,
2946 /* 59 ";" */ CSPCL_CWORD_CWORD_CWORD,
2947 /* 60 "<" */ CSPCL_CWORD_CWORD_CWORD,
2948 /* 61 "=" */ CWORD_CCTL_CCTL_CWORD,
2949 /* 62 ">" */ CSPCL_CWORD_CWORD_CWORD,
2950 /* 63 "?" */ CWORD_CCTL_CCTL_CWORD,
2951 /* 64 "@" */ CWORD_CWORD_CWORD_CWORD,
2952 /* 65 "A" */ CWORD_CWORD_CWORD_CWORD,
2953 /* 66 "B" */ CWORD_CWORD_CWORD_CWORD,
2954 /* 67 "C" */ CWORD_CWORD_CWORD_CWORD,
2955 /* 68 "D" */ CWORD_CWORD_CWORD_CWORD,
2956 /* 69 "E" */ CWORD_CWORD_CWORD_CWORD,
2957 /* 70 "F" */ CWORD_CWORD_CWORD_CWORD,
2958 /* 71 "G" */ CWORD_CWORD_CWORD_CWORD,
2959 /* 72 "H" */ CWORD_CWORD_CWORD_CWORD,
2960 /* 73 "I" */ CWORD_CWORD_CWORD_CWORD,
2961 /* 74 "J" */ CWORD_CWORD_CWORD_CWORD,
2962 /* 75 "K" */ CWORD_CWORD_CWORD_CWORD,
2963 /* 76 "L" */ CWORD_CWORD_CWORD_CWORD,
2964 /* 77 "M" */ CWORD_CWORD_CWORD_CWORD,
2965 /* 78 "N" */ CWORD_CWORD_CWORD_CWORD,
2966 /* 79 "O" */ CWORD_CWORD_CWORD_CWORD,
2967 /* 80 "P" */ CWORD_CWORD_CWORD_CWORD,
2968 /* 81 "Q" */ CWORD_CWORD_CWORD_CWORD,
2969 /* 82 "R" */ CWORD_CWORD_CWORD_CWORD,
2970 /* 83 "S" */ CWORD_CWORD_CWORD_CWORD,
2971 /* 84 "T" */ CWORD_CWORD_CWORD_CWORD,
2972 /* 85 "U" */ CWORD_CWORD_CWORD_CWORD,
2973 /* 86 "V" */ CWORD_CWORD_CWORD_CWORD,
2974 /* 87 "W" */ CWORD_CWORD_CWORD_CWORD,
2975 /* 88 "X" */ CWORD_CWORD_CWORD_CWORD,
2976 /* 89 "Y" */ CWORD_CWORD_CWORD_CWORD,
2977 /* 90 "Z" */ CWORD_CWORD_CWORD_CWORD,
2978 /* 91 "[" */ CWORD_CCTL_CCTL_CWORD,
2979 /* 92 "\" */ CBACK_CBACK_CCTL_CBACK,
2980 /* 93 "]" */ CWORD_CCTL_CCTL_CWORD,
2981 /* 94 "^" */ CWORD_CWORD_CWORD_CWORD,
2982 /* 95 "_" */ CWORD_CWORD_CWORD_CWORD,
2983 /* 96 "`" */ CBQUOTE_CBQUOTE_CWORD_CBQUOTE,
2984 /* 97 "a" */ CWORD_CWORD_CWORD_CWORD,
2985 /* 98 "b" */ CWORD_CWORD_CWORD_CWORD,
2986 /* 99 "c" */ CWORD_CWORD_CWORD_CWORD,
2987 /* 100 "d" */ CWORD_CWORD_CWORD_CWORD,
2988 /* 101 "e" */ CWORD_CWORD_CWORD_CWORD,
2989 /* 102 "f" */ CWORD_CWORD_CWORD_CWORD,
2990 /* 103 "g" */ CWORD_CWORD_CWORD_CWORD,
2991 /* 104 "h" */ CWORD_CWORD_CWORD_CWORD,
2992 /* 105 "i" */ CWORD_CWORD_CWORD_CWORD,
2993 /* 106 "j" */ CWORD_CWORD_CWORD_CWORD,
2994 /* 107 "k" */ CWORD_CWORD_CWORD_CWORD,
2995 /* 108 "l" */ CWORD_CWORD_CWORD_CWORD,
2996 /* 109 "m" */ CWORD_CWORD_CWORD_CWORD,
2997 /* 110 "n" */ CWORD_CWORD_CWORD_CWORD,
2998 /* 111 "o" */ CWORD_CWORD_CWORD_CWORD,
2999 /* 112 "p" */ CWORD_CWORD_CWORD_CWORD,
3000 /* 113 "q" */ CWORD_CWORD_CWORD_CWORD,
3001 /* 114 "r" */ CWORD_CWORD_CWORD_CWORD,
3002 /* 115 "s" */ CWORD_CWORD_CWORD_CWORD,
3003 /* 116 "t" */ CWORD_CWORD_CWORD_CWORD,
3004 /* 117 "u" */ CWORD_CWORD_CWORD_CWORD,
3005 /* 118 "v" */ CWORD_CWORD_CWORD_CWORD,
3006 /* 119 "w" */ CWORD_CWORD_CWORD_CWORD,
3007 /* 120 "x" */ CWORD_CWORD_CWORD_CWORD,
3008 /* 121 "y" */ CWORD_CWORD_CWORD_CWORD,
3009 /* 122 "z" */ CWORD_CWORD_CWORD_CWORD,
3010 /* 123 "{" */ CWORD_CWORD_CWORD_CWORD,
3011 /* 124 "|" */ CSPCL_CWORD_CWORD_CWORD,
3012 /* 125 "}" */ CENDVAR_CENDVAR_CWORD_CENDVAR,
3013 /* 126 "~" */ CWORD_CCTL_CCTL_CWORD,
3014 /* 127 del */ CWORD_CWORD_CWORD_CWORD,
3015 /* 128 0x80 */ CWORD_CWORD_CWORD_CWORD,
3016 /* 129 CTLESC */ CCTL_CCTL_CCTL_CCTL,
3017 /* 130 CTLVAR */ CCTL_CCTL_CCTL_CCTL,
3018 /* 131 CTLENDVAR */ CCTL_CCTL_CCTL_CCTL,
3019 /* 132 CTLBACKQ */ CCTL_CCTL_CCTL_CCTL,
3020 /* 133 CTLQUOTE */ CCTL_CCTL_CCTL_CCTL,
3021 /* 134 CTLARI */ CCTL_CCTL_CCTL_CCTL,
3022 /* 135 CTLENDARI */ CCTL_CCTL_CCTL_CCTL,
3023 /* 136 CTLQUOTEMARK */ CCTL_CCTL_CCTL_CCTL,
3024 /* 137 */ CWORD_CWORD_CWORD_CWORD,
3025 /* 138 */ CWORD_CWORD_CWORD_CWORD,
3026 /* 139 */ CWORD_CWORD_CWORD_CWORD,
3027 /* 140 */ CWORD_CWORD_CWORD_CWORD,
3028 /* 141 */ CWORD_CWORD_CWORD_CWORD,
3029 /* 142 */ CWORD_CWORD_CWORD_CWORD,
3030 /* 143 */ CWORD_CWORD_CWORD_CWORD,
3031 /* 144 */ CWORD_CWORD_CWORD_CWORD,
3032 /* 145 */ CWORD_CWORD_CWORD_CWORD,
3033 /* 146 */ CWORD_CWORD_CWORD_CWORD,
3034 /* 147 */ CWORD_CWORD_CWORD_CWORD,
3035 /* 148 */ CWORD_CWORD_CWORD_CWORD,
3036 /* 149 */ CWORD_CWORD_CWORD_CWORD,
3037 /* 150 */ CWORD_CWORD_CWORD_CWORD,
3038 /* 151 */ CWORD_CWORD_CWORD_CWORD,
3039 /* 152 */ CWORD_CWORD_CWORD_CWORD,
3040 /* 153 */ CWORD_CWORD_CWORD_CWORD,
3041 /* 154 */ CWORD_CWORD_CWORD_CWORD,
3042 /* 155 */ CWORD_CWORD_CWORD_CWORD,
3043 /* 156 */ CWORD_CWORD_CWORD_CWORD,
3044 /* 157 */ CWORD_CWORD_CWORD_CWORD,
3045 /* 158 */ CWORD_CWORD_CWORD_CWORD,
3046 /* 159 */ CWORD_CWORD_CWORD_CWORD,
3047 /* 160 */ CWORD_CWORD_CWORD_CWORD,
3048 /* 161 */ CWORD_CWORD_CWORD_CWORD,
3049 /* 162 */ CWORD_CWORD_CWORD_CWORD,
3050 /* 163 */ CWORD_CWORD_CWORD_CWORD,
3051 /* 164 */ CWORD_CWORD_CWORD_CWORD,
3052 /* 165 */ CWORD_CWORD_CWORD_CWORD,
3053 /* 166 */ CWORD_CWORD_CWORD_CWORD,
3054 /* 167 */ CWORD_CWORD_CWORD_CWORD,
3055 /* 168 */ CWORD_CWORD_CWORD_CWORD,
3056 /* 169 */ CWORD_CWORD_CWORD_CWORD,
3057 /* 170 */ CWORD_CWORD_CWORD_CWORD,
3058 /* 171 */ CWORD_CWORD_CWORD_CWORD,
3059 /* 172 */ CWORD_CWORD_CWORD_CWORD,
3060 /* 173 */ CWORD_CWORD_CWORD_CWORD,
3061 /* 174 */ CWORD_CWORD_CWORD_CWORD,
3062 /* 175 */ CWORD_CWORD_CWORD_CWORD,
3063 /* 176 */ CWORD_CWORD_CWORD_CWORD,
3064 /* 177 */ CWORD_CWORD_CWORD_CWORD,
3065 /* 178 */ CWORD_CWORD_CWORD_CWORD,
3066 /* 179 */ CWORD_CWORD_CWORD_CWORD,
3067 /* 180 */ CWORD_CWORD_CWORD_CWORD,
3068 /* 181 */ CWORD_CWORD_CWORD_CWORD,
3069 /* 182 */ CWORD_CWORD_CWORD_CWORD,
3070 /* 183 */ CWORD_CWORD_CWORD_CWORD,
3071 /* 184 */ CWORD_CWORD_CWORD_CWORD,
3072 /* 185 */ CWORD_CWORD_CWORD_CWORD,
3073 /* 186 */ CWORD_CWORD_CWORD_CWORD,
3074 /* 187 */ CWORD_CWORD_CWORD_CWORD,
3075 /* 188 */ CWORD_CWORD_CWORD_CWORD,
3076 /* 189 */ CWORD_CWORD_CWORD_CWORD,
3077 /* 190 */ CWORD_CWORD_CWORD_CWORD,
3078 /* 191 */ CWORD_CWORD_CWORD_CWORD,
3079 /* 192 */ CWORD_CWORD_CWORD_CWORD,
3080 /* 193 */ CWORD_CWORD_CWORD_CWORD,
3081 /* 194 */ CWORD_CWORD_CWORD_CWORD,
3082 /* 195 */ CWORD_CWORD_CWORD_CWORD,
3083 /* 196 */ CWORD_CWORD_CWORD_CWORD,
3084 /* 197 */ CWORD_CWORD_CWORD_CWORD,
3085 /* 198 */ CWORD_CWORD_CWORD_CWORD,
3086 /* 199 */ CWORD_CWORD_CWORD_CWORD,
3087 /* 200 */ CWORD_CWORD_CWORD_CWORD,
3088 /* 201 */ CWORD_CWORD_CWORD_CWORD,
3089 /* 202 */ CWORD_CWORD_CWORD_CWORD,
3090 /* 203 */ CWORD_CWORD_CWORD_CWORD,
3091 /* 204 */ CWORD_CWORD_CWORD_CWORD,
3092 /* 205 */ CWORD_CWORD_CWORD_CWORD,
3093 /* 206 */ CWORD_CWORD_CWORD_CWORD,
3094 /* 207 */ CWORD_CWORD_CWORD_CWORD,
3095 /* 208 */ CWORD_CWORD_CWORD_CWORD,
3096 /* 209 */ CWORD_CWORD_CWORD_CWORD,
3097 /* 210 */ CWORD_CWORD_CWORD_CWORD,
3098 /* 211 */ CWORD_CWORD_CWORD_CWORD,
3099 /* 212 */ CWORD_CWORD_CWORD_CWORD,
3100 /* 213 */ CWORD_CWORD_CWORD_CWORD,
3101 /* 214 */ CWORD_CWORD_CWORD_CWORD,
3102 /* 215 */ CWORD_CWORD_CWORD_CWORD,
3103 /* 216 */ CWORD_CWORD_CWORD_CWORD,
3104 /* 217 */ CWORD_CWORD_CWORD_CWORD,
3105 /* 218 */ CWORD_CWORD_CWORD_CWORD,
3106 /* 219 */ CWORD_CWORD_CWORD_CWORD,
3107 /* 220 */ CWORD_CWORD_CWORD_CWORD,
3108 /* 221 */ CWORD_CWORD_CWORD_CWORD,
3109 /* 222 */ CWORD_CWORD_CWORD_CWORD,
3110 /* 223 */ CWORD_CWORD_CWORD_CWORD,
3111 /* 224 */ CWORD_CWORD_CWORD_CWORD,
3112 /* 225 */ CWORD_CWORD_CWORD_CWORD,
3113 /* 226 */ CWORD_CWORD_CWORD_CWORD,
3114 /* 227 */ CWORD_CWORD_CWORD_CWORD,
3115 /* 228 */ CWORD_CWORD_CWORD_CWORD,
3116 /* 229 */ CWORD_CWORD_CWORD_CWORD,
3117 /* 230 */ CWORD_CWORD_CWORD_CWORD,
3118 /* 231 */ CWORD_CWORD_CWORD_CWORD,
3119 /* 232 */ CWORD_CWORD_CWORD_CWORD,
3120 /* 233 */ CWORD_CWORD_CWORD_CWORD,
3121 /* 234 */ CWORD_CWORD_CWORD_CWORD,
3122 /* 235 */ CWORD_CWORD_CWORD_CWORD,
3123 /* 236 */ CWORD_CWORD_CWORD_CWORD,
3124 /* 237 */ CWORD_CWORD_CWORD_CWORD,
3125 /* 238 */ CWORD_CWORD_CWORD_CWORD,
3126 /* 239 */ CWORD_CWORD_CWORD_CWORD,
3127 /* 230 */ CWORD_CWORD_CWORD_CWORD,
3128 /* 241 */ CWORD_CWORD_CWORD_CWORD,
3129 /* 242 */ CWORD_CWORD_CWORD_CWORD,
3130 /* 243 */ CWORD_CWORD_CWORD_CWORD,
3131 /* 244 */ CWORD_CWORD_CWORD_CWORD,
3132 /* 245 */ CWORD_CWORD_CWORD_CWORD,
3133 /* 246 */ CWORD_CWORD_CWORD_CWORD,
3134 /* 247 */ CWORD_CWORD_CWORD_CWORD,
3135 /* 248 */ CWORD_CWORD_CWORD_CWORD,
3136 /* 249 */ CWORD_CWORD_CWORD_CWORD,
3137 /* 250 */ CWORD_CWORD_CWORD_CWORD,
3138 /* 251 */ CWORD_CWORD_CWORD_CWORD,
3139 /* 252 */ CWORD_CWORD_CWORD_CWORD,
3140 /* 253 */ CWORD_CWORD_CWORD_CWORD,
3141 /* 254 */ CWORD_CWORD_CWORD_CWORD,
3142 /* 255 */ CWORD_CWORD_CWORD_CWORD,
3143 /* PEOF */ CENDFILE_CENDFILE_CENDFILE_CENDFILE,
3144 # if ENABLE_ASH_ALIAS
3145 /* PEOA */ CSPCL_CIGN_CIGN_CIGN,
3149 # define SIT(c, syntax) ((S_I_T[syntax_index_table[c]] >> ((syntax)*4)) & 0xf)
3151 #endif /* !USE_SIT_FUNCTION */
3154 /* ============ Alias handling */
3156 #if ENABLE_ASH_ALIAS
3158 #define ALIASINUSE 1
3169 static struct alias **atab; // [ATABSIZE];
3170 #define INIT_G_alias() do { \
3171 atab = xzalloc(ATABSIZE * sizeof(atab[0])); \
3175 static struct alias **
3176 __lookupalias(const char *name) {
3177 unsigned int hashval;
3184 ch = (unsigned char)*p;
3188 ch = (unsigned char)*++p;
3190 app = &atab[hashval % ATABSIZE];
3192 for (; *app; app = &(*app)->next) {
3193 if (strcmp(name, (*app)->name) == 0) {
3201 static struct alias *
3202 lookupalias(const char *name, int check)
3204 struct alias *ap = *__lookupalias(name);
3206 if (check && ap && (ap->flag & ALIASINUSE))
3211 static struct alias *
3212 freealias(struct alias *ap)
3216 if (ap->flag & ALIASINUSE) {
3217 ap->flag |= ALIASDEAD;
3229 setalias(const char *name, const char *val)
3231 struct alias *ap, **app;
3233 app = __lookupalias(name);
3237 if (!(ap->flag & ALIASINUSE)) {
3240 ap->val = ckstrdup(val);
3241 ap->flag &= ~ALIASDEAD;
3244 ap = ckzalloc(sizeof(struct alias));
3245 ap->name = ckstrdup(name);
3246 ap->val = ckstrdup(val);
3247 /*ap->flag = 0; - ckzalloc did it */
3248 /*ap->next = NULL;*/
3255 unalias(const char *name)
3259 app = __lookupalias(name);
3263 *app = freealias(*app);
3274 struct alias *ap, **app;
3278 for (i = 0; i < ATABSIZE; i++) {
3280 for (ap = *app; ap; ap = *app) {
3281 *app = freealias(*app);
3291 printalias(const struct alias *ap)
3293 out1fmt("%s=%s\n", ap->name, single_quote(ap->val));
3297 * TODO - sort output
3299 static int FAST_FUNC
3300 aliascmd(int argc UNUSED_PARAM, char **argv)
3309 for (i = 0; i < ATABSIZE; i++) {
3310 for (ap = atab[i]; ap; ap = ap->next) {
3316 while ((n = *++argv) != NULL) {
3317 v = strchr(n+1, '=');
3318 if (v == NULL) { /* n+1: funny ksh stuff */
3319 ap = *__lookupalias(n);
3321 fprintf(stderr, "%s: %s not found\n", "alias", n);
3334 static int FAST_FUNC
3335 unaliascmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
3339 while ((i = nextopt("a")) != '\0') {
3345 for (i = 0; *argptr; argptr++) {
3346 if (unalias(*argptr)) {
3347 fprintf(stderr, "%s: %s not found\n", "unalias", *argptr);
3355 #endif /* ASH_ALIAS */
3358 /* ============ jobs.c */
3360 /* Mode argument to forkshell. Don't change FORK_FG or FORK_BG. */
3363 #define FORK_NOJOB 2
3365 /* mode flags for showjob(s) */
3366 #define SHOW_ONLY_PGID 0x01 /* show only pgid (jobs -p) */
3367 #define SHOW_PIDS 0x02 /* show individual pids, not just one line per job */
3368 #define SHOW_CHANGED 0x04 /* only jobs whose state has changed */
3369 #define SHOW_STDERR 0x08 /* print to stderr (else stdout) */
3372 * A job structure contains information about a job. A job is either a
3373 * single process or a set of processes contained in a pipeline. In the
3374 * latter case, pidlist will be non-NULL, and will point to a -1 terminated
3378 pid_t ps_pid; /* process id */
3379 int ps_status; /* last process status from wait() */
3380 char *ps_cmd; /* text of command being run */
3384 struct procstat ps0; /* status of process */
3385 struct procstat *ps; /* status or processes when more than one */
3387 int stopstatus; /* status of a stopped job */
3390 nprocs: 16, /* number of processes */
3392 #define JOBRUNNING 0 /* at least one proc running */
3393 #define JOBSTOPPED 1 /* all procs are stopped */
3394 #define JOBDONE 2 /* all procs are completed */
3396 sigint: 1, /* job was killed by SIGINT */
3397 jobctl: 1, /* job running under job control */
3399 waited: 1, /* true if this entry has been waited for */
3400 used: 1, /* true if this entry is in used */
3401 changed: 1; /* true if status has changed */
3402 struct job *prev_job; /* previous job */
3405 static struct job *makejob(/*union node *,*/ int);
3406 static int forkshell(struct job *, union node *, int);
3407 static int waitforjob(struct job *);
3410 enum { doing_jobctl = 0 };
3411 #define setjobctl(on) do {} while (0)
3413 static smallint doing_jobctl; //references:8
3414 static void setjobctl(int);
3421 ignoresig(int signo)
3423 /* Avoid unnecessary system calls. Is it already SIG_IGNed? */
3424 if (sigmode[signo - 1] != S_IGN && sigmode[signo - 1] != S_HARD_IGN) {
3425 /* No, need to do it */
3426 signal(signo, SIG_IGN);
3428 sigmode[signo - 1] = S_HARD_IGN;
3432 * Only one usage site - in setsignal()
3435 signal_handler(int signo)
3437 gotsig[signo - 1] = 1;
3439 if (signo == SIGINT && !trap[SIGINT]) {
3440 if (!suppress_int) {
3442 raise_interrupt(); /* does not return */
3446 pending_sig = signo;
3451 * Set the signal handler for the specified signal. The routine figures
3452 * out what it should be set to.
3455 setsignal(int signo)
3458 char cur_act, new_act;
3459 struct sigaction act;
3463 if (t != NULL) { /* trap for this sig is set */
3465 if (t[0] == '\0') /* trap is "": ignore this sig */
3469 if (rootshell && new_act == S_DFL) {
3472 if (iflag || minusc || sflag == 0)
3481 * "In all cases, bash ignores SIGQUIT. Non-builtin
3482 * commands run by bash have signal handlers
3483 * set to the values inherited by the shell
3484 * from its parent". */
3500 //TODO: if !rootshell, we reset SIGQUIT to DFL,
3501 //whereas we have to restore it to what shell got on entry
3502 //from the parent. See comment above
3504 t = &sigmode[signo - 1];
3507 /* current setting is not yet known */
3508 if (sigaction(signo, NULL, &act)) {
3509 /* pretend it worked; maybe we should give a warning,
3510 * but other shells don't. We don't alter sigmode,
3511 * so we retry every time.
3512 * btw, in Linux it never fails. --vda */
3515 if (act.sa_handler == SIG_IGN) {
3516 cur_act = S_HARD_IGN;
3518 && (signo == SIGTSTP || signo == SIGTTIN || signo == SIGTTOU)
3520 cur_act = S_IGN; /* don't hard ignore these */
3524 if (cur_act == S_HARD_IGN || cur_act == new_act)
3527 act.sa_handler = SIG_DFL;
3530 act.sa_handler = signal_handler;
3533 act.sa_handler = SIG_IGN;
3537 /* flags and mask matter only if !DFL and !IGN, but we do it
3538 * for all cases for more deterministic behavior:
3541 sigfillset(&act.sa_mask);
3543 sigaction_set(signo, &act);
3548 /* mode flags for set_curjob */
3549 #define CUR_DELETE 2
3550 #define CUR_RUNNING 1
3551 #define CUR_STOPPED 0
3553 /* mode flags for dowait */
3554 #define DOWAIT_NONBLOCK WNOHANG
3555 #define DOWAIT_BLOCK 0
3558 /* pgrp of shell on invocation */
3559 static int initialpgrp; //references:2
3560 static int ttyfd = -1; //5
3563 static struct job *jobtab; //5
3565 static unsigned njobs; //4
3567 static struct job *curjob; //lots
3568 /* number of presumed living untracked jobs */
3569 static int jobless; //4
3572 set_curjob(struct job *jp, unsigned mode)
3575 struct job **jpp, **curp;
3577 /* first remove from list */
3578 jpp = curp = &curjob;
3583 jpp = &jp1->prev_job;
3585 *jpp = jp1->prev_job;
3587 /* Then re-insert in correct position */
3595 /* job being deleted */
3598 /* newly created job or backgrounded job,
3599 * put after all stopped jobs.
3604 if (!jp1 || jp1->state != JOBSTOPPED)
3607 jpp = &jp1->prev_job;
3613 /* newly stopped job - becomes curjob */
3614 jp->prev_job = *jpp;
3622 jobno(const struct job *jp)
3624 return jp - jobtab + 1;
3629 * Convert a job name to a job structure.
3632 #define getjob(name, getctl) getjob(name)
3635 getjob(const char *name, int getctl)
3639 const char *err_msg = "%s: no such job";
3643 char *(*match)(const char *, const char *);
3658 if (c == '+' || c == '%') {
3660 err_msg = "No current job";
3666 err_msg = "No previous job";
3676 if (num > 0 && num <= njobs) {
3677 jp = jobtab + num - 1;
3692 if (match(jp->ps[0].ps_cmd, p)) {
3696 err_msg = "%s: ambiguous";
3706 err_msg = "job %s not created under job control";
3707 if (getctl && jp->jobctl == 0)
3712 ash_msg_and_raise_error(err_msg, name);
3716 * Mark a job structure as unused.
3719 freejob(struct job *jp)
3721 struct procstat *ps;
3725 for (i = jp->nprocs, ps = jp->ps; --i >= 0; ps++) {
3726 if (ps->ps_cmd != nullstr)
3729 if (jp->ps != &jp->ps0)
3732 set_curjob(jp, CUR_DELETE);
3738 xtcsetpgrp(int fd, pid_t pgrp)
3740 if (tcsetpgrp(fd, pgrp))
3741 ash_msg_and_raise_error("can't set tty process group (%m)");
3745 * Turn job control on and off.
3747 * Note: This code assumes that the third arg to ioctl is a character
3748 * pointer, which is true on Berkeley systems but not System V. Since
3749 * System V doesn't have job control yet, this isn't a problem now.
3751 * Called with interrupts off.
3759 if (on == doing_jobctl || rootshell == 0)
3763 ofd = fd = open(_PATH_TTY, O_RDWR);
3765 /* BTW, bash will try to open(ttyname(0)) if open("/dev/tty") fails.
3766 * That sometimes helps to acquire controlling tty.
3767 * Obviously, a workaround for bugs when someone
3768 * failed to provide a controlling tty to bash! :) */
3774 fd = fcntl(fd, F_DUPFD, 10);
3779 /* fd is a tty at this point */
3780 close_on_exec_on(fd);
3781 while (1) { /* while we are in the background */
3782 pgrp = tcgetpgrp(fd);
3785 ash_msg("can't access tty; job control turned off");
3789 if (pgrp == getpgrp())
3800 xtcsetpgrp(fd, pgrp);
3802 /* turning job control off */
3805 /* was xtcsetpgrp, but this can make exiting ash
3806 * loop forever if pty is already deleted */
3807 tcsetpgrp(fd, pgrp);
3821 static int FAST_FUNC
3822 killcmd(int argc, char **argv)
3824 if (argv[1] && strcmp(argv[1], "-l") != 0) {
3827 if (argv[i][0] == '%') {
3829 * "kill %N" - job kill
3830 * Converting to pgrp / pid kill
3836 jp = getjob(argv[i], 0);
3838 * In jobs started under job control, we signal
3839 * entire process group by kill -PGRP_ID.
3840 * This happens, f.e., in interactive shell.
3842 * Otherwise, we signal each child via
3843 * kill PID1 PID2 PID3.
3845 * sh -c 'sleep 1|sleep 1 & kill %1'
3846 * sh -c 'true|sleep 2 & sleep 1; kill %1'
3847 * sh -c 'true|sleep 1 & sleep 2; kill %1'
3849 n = jp->nprocs; /* can't be 0 (I hope) */
3852 dst = alloca(n * sizeof(int)*4);
3854 for (j = 0; j < n; j++) {
3855 struct procstat *ps = &jp->ps[j];
3856 /* Skip non-running and not-stopped members
3857 * (i.e. dead members) of the job
3859 if (ps->ps_status != -1 && !WIFSTOPPED(ps->ps_status))
3862 * kill_main has matching code to expect
3863 * leading space. Needed to not confuse
3864 * negative pids with "kill -SIGNAL_NO" syntax
3866 dst += sprintf(dst, jp->jobctl ? " -%u" : " %u", (int)ps->ps_pid);
3870 } while (argv[++i]);
3872 return kill_main(argc, argv);
3876 showpipe(struct job *jp /*, FILE *out*/)
3878 struct procstat *ps;
3879 struct procstat *psend;
3881 psend = jp->ps + jp->nprocs;
3882 for (ps = jp->ps + 1; ps < psend; ps++)
3883 printf(" | %s", ps->ps_cmd);
3884 newline_and_flush(stdout);
3885 flush_stdout_stderr();
3890 restartjob(struct job *jp, int mode)
3892 struct procstat *ps;
3898 if (jp->state == JOBDONE)
3900 jp->state = JOBRUNNING;
3901 pgid = jp->ps[0].ps_pid;
3902 if (mode == FORK_FG)
3903 xtcsetpgrp(ttyfd, pgid);
3904 killpg(pgid, SIGCONT);
3908 if (WIFSTOPPED(ps->ps_status)) {
3914 status = (mode == FORK_FG) ? waitforjob(jp) : 0;
3919 static int FAST_FUNC
3920 fg_bgcmd(int argc UNUSED_PARAM, char **argv)
3926 mode = (**argv == 'f') ? FORK_FG : FORK_BG;
3930 jp = getjob(*argv, 1);
3931 if (mode == FORK_BG) {
3932 set_curjob(jp, CUR_RUNNING);
3933 printf("[%d] ", jobno(jp));
3935 out1str(jp->ps[0].ps_cmd);
3936 showpipe(jp /*, stdout*/);
3937 retval = restartjob(jp, mode);
3938 } while (*argv && *++argv);
3944 sprint_status48(char *s, int status, int sigonly)
3950 if (!WIFEXITED(status)) {
3951 if (JOBS && WIFSTOPPED(status))
3952 st = WSTOPSIG(status);
3954 st = WTERMSIG(status);
3956 if (st == SIGINT || st == SIGPIPE)
3958 if (JOBS && WIFSTOPPED(status))
3962 //TODO: use bbox's get_signame? strsignal adds ~600 bytes to text+rodata
3963 col = fmtstr(s, 32, strsignal(st));
3964 if (WCOREDUMP(status)) {
3965 strcpy(s + col, " (core dumped)");
3966 col += sizeof(" (core dumped)")-1;
3968 } else if (!sigonly) {
3969 st = WEXITSTATUS(status);
3970 col = fmtstr(s, 16, (st ? "Done(%d)" : "Done"), st);
3977 dowait(int wait_flags, struct job *job)
3982 struct job *thisjob;
3984 TRACE(("dowait(0x%x) called\n", wait_flags));
3986 /* Do a wait system call. If job control is compiled in, we accept
3987 * stopped processes. wait_flags may have WNOHANG, preventing blocking.
3988 * NB: _not_ safe_waitpid, we need to detect EINTR */
3990 wait_flags |= WUNTRACED;
3991 pid = waitpid(-1, &status, wait_flags);
3992 TRACE(("wait returns pid=%d, status=0x%x, errno=%d(%s)\n",
3993 pid, status, errno, strerror(errno)));
3999 for (jp = curjob; jp; jp = jp->prev_job) {
4001 struct procstat *ps;
4002 struct procstat *psend;
4003 if (jp->state == JOBDONE)
4007 psend = ps + jp->nprocs;
4009 if (ps->ps_pid == pid) {
4010 TRACE(("Job %d: changing status of proc %d "
4011 "from 0x%x to 0x%x\n",
4012 jobno(jp), pid, ps->ps_status, status));
4013 ps->ps_status = status;
4016 if (ps->ps_status == -1)
4017 jobstate = JOBRUNNING;
4019 if (jobstate == JOBRUNNING)
4021 if (WIFSTOPPED(ps->ps_status)) {
4022 jp->stopstatus = ps->ps_status;
4023 jobstate = JOBSTOPPED;
4026 } while (++ps < psend);
4030 /* Found the job where one of its processes changed its state.
4031 * Is there at least one live and running process in this job? */
4032 if (jobstate != JOBRUNNING) {
4033 /* No. All live processes in the job are stopped
4034 * (JOBSTOPPED) or there are no live processes (JOBDONE)
4036 thisjob->changed = 1;
4037 if (thisjob->state != jobstate) {
4038 TRACE(("Job %d: changing state from %d to %d\n",
4039 jobno(thisjob), thisjob->state, jobstate));
4040 thisjob->state = jobstate;
4042 if (jobstate == JOBSTOPPED)
4043 set_curjob(thisjob, CUR_STOPPED);
4049 /* The process wasn't found in job list */
4050 if (JOBS && !WIFSTOPPED(status))
4055 if (thisjob && thisjob == job) {
4059 len = sprint_status48(s, status, 1);
4070 blocking_wait_with_raise_on_sig(void)
4072 pid_t pid = dowait(DOWAIT_BLOCK, NULL);
4073 if (pid <= 0 && pending_sig)
4074 raise_exception(EXSIG);
4080 showjob(struct job *jp, int mode)
4082 struct procstat *ps;
4083 struct procstat *psend;
4086 char s[16 + 16 + 48];
4087 FILE *out = (mode & SHOW_STDERR ? stderr : stdout);
4091 if (mode & SHOW_ONLY_PGID) { /* jobs -p */
4092 /* just output process (group) id of pipeline */
4093 fprintf(out, "%d\n", ps->ps_pid);
4097 col = fmtstr(s, 16, "[%d] ", jobno(jp));
4102 else if (curjob && jp == curjob->prev_job)
4105 if (mode & SHOW_PIDS)
4106 col += fmtstr(s + col, 16, "%d ", ps->ps_pid);
4108 psend = ps + jp->nprocs;
4110 if (jp->state == JOBRUNNING) {
4111 strcpy(s + col, "Running");
4112 col += sizeof("Running") - 1;
4114 int status = psend[-1].ps_status;
4115 if (jp->state == JOBSTOPPED)
4116 status = jp->stopstatus;
4117 col += sprint_status48(s + col, status, 0);
4119 /* By now, "[JOBID]* [maybe PID] STATUS" is printed */
4121 /* This loop either prints "<cmd1> | <cmd2> | <cmd3>" line
4122 * or prints several "PID | <cmdN>" lines,
4123 * depending on SHOW_PIDS bit.
4124 * We do not print status of individual processes
4125 * between PID and <cmdN>. bash does it, but not very well:
4126 * first line shows overall job status, not process status,
4127 * making it impossible to know 1st process status.
4131 /* for each process */
4134 if (mode & SHOW_PIDS)
4135 col = fmtstr(s, 48, "\n%*c%d ", indent_col, ' ', ps->ps_pid) - 1;
4137 fprintf(out, "%s%*c%s%s",
4139 33 - col >= 0 ? 33 - col : 0, ' ',
4140 ps == jp->ps ? "" : "| ",
4143 } while (++ps != psend);
4144 newline_and_flush(out);
4148 if (jp->state == JOBDONE) {
4149 TRACE(("showjob: freeing job %d\n", jobno(jp)));
4155 * Print a list of jobs. If "change" is nonzero, only print jobs whose
4156 * statuses have changed since the last call to showjobs.
4163 TRACE(("showjobs(0x%x) called\n", mode));
4165 /* Handle all finished jobs */
4166 while (dowait(DOWAIT_NONBLOCK, NULL) > 0)
4169 for (jp = curjob; jp; jp = jp->prev_job) {
4170 if (!(mode & SHOW_CHANGED) || jp->changed) {
4176 static int FAST_FUNC
4177 jobscmd(int argc UNUSED_PARAM, char **argv)
4182 while ((m = nextopt("lp")) != '\0') {
4186 mode |= SHOW_ONLY_PGID;
4192 showjob(getjob(*argv, 0), mode);
4202 /* Called only on finished or stopped jobs (no members are running) */
4204 getstatus(struct job *job)
4208 struct procstat *ps;
4210 /* Fetch last member's status */
4211 ps = job->ps + job->nprocs - 1;
4212 status = ps->ps_status;
4214 /* "set -o pipefail" mode: use last _nonzero_ status */
4215 while (status == 0 && --ps >= job->ps)
4216 status = ps->ps_status;
4219 retval = WEXITSTATUS(status);
4220 if (!WIFEXITED(status)) {
4222 retval = WSTOPSIG(status);
4223 if (!WIFSTOPPED(status))
4226 /* XXX: limits number of signals */
4227 retval = WTERMSIG(status);
4229 if (retval == SIGINT)
4235 TRACE(("getstatus: job %d, nproc %d, status 0x%x, retval 0x%x\n",
4236 jobno(job), job->nprocs, status, retval));
4240 static int FAST_FUNC
4241 waitcmd(int argc UNUSED_PARAM, char **argv)
4248 raise_exception(EXSIG);
4255 /* wait for all jobs */
4259 if (!jp) /* no running procs */
4261 if (jp->state == JOBRUNNING)
4266 blocking_wait_with_raise_on_sig();
4268 * "When bash is waiting for an asynchronous command via
4269 * the wait builtin, the reception of a signal for which a trap
4270 * has been set will cause the wait builtin to return immediately
4271 * with an exit status greater than 128, immediately after which
4272 * the trap is executed."
4274 * blocking_wait_with_raise_on_sig raises signal handlers
4275 * if it gets no pid (pid < 0). However,
4276 * if child sends us a signal *and immediately exits*,
4277 * blocking_wait_with_raise_on_sig gets pid > 0
4278 * and does not handle pending_sig. Check this case: */
4280 raise_exception(EXSIG);
4286 if (**argv != '%') {
4287 pid_t pid = number(*argv);
4292 if (job->ps[job->nprocs - 1].ps_pid == pid)
4294 job = job->prev_job;
4297 job = getjob(*argv, 0);
4299 /* loop until process terminated or stopped */
4300 while (job->state == JOBRUNNING)
4301 blocking_wait_with_raise_on_sig();
4303 retval = getstatus(job);
4316 struct job *jp, *jq;
4318 len = njobs * sizeof(*jp);
4320 jp = ckrealloc(jq, len + 4 * sizeof(*jp));
4322 offset = (char *)jp - (char *)jq;
4324 /* Relocate pointers */
4327 jq = (struct job *)((char *)jq + l);
4331 #define joff(p) ((struct job *)((char *)(p) + l))
4332 #define jmove(p) (p) = (void *)((char *)(p) + offset)
4333 if (joff(jp)->ps == &jq->ps0)
4334 jmove(joff(jp)->ps);
4335 if (joff(jp)->prev_job)
4336 jmove(joff(jp)->prev_job);
4346 jp = (struct job *)((char *)jp + len);
4350 } while (--jq >= jp);
4355 * Return a new job structure.
4356 * Called with interrupts off.
4359 makejob(/*union node *node,*/ int nprocs)
4364 for (i = njobs, jp = jobtab; ; jp++) {
4371 if (jp->state != JOBDONE || !jp->waited)
4380 memset(jp, 0, sizeof(*jp));
4382 /* jp->jobctl is a bitfield.
4383 * "jp->jobctl |= jobctl" likely to give awful code */
4387 jp->prev_job = curjob;
4392 jp->ps = ckmalloc(nprocs * sizeof(struct procstat));
4394 TRACE(("makejob(%d) returns %%%d\n", nprocs,
4401 * Return a string identifying a command (to be printed by the
4404 static char *cmdnextc;
4407 cmdputs(const char *s)
4409 static const char vstype[VSTYPE + 1][3] = {
4410 "", "}", "-", "+", "?", "=",
4411 "%", "%%", "#", "##"
4412 IF_ASH_BASH_COMPAT(, ":", "/", "//")
4415 const char *p, *str;
4419 unsigned char subtype = 0;
4423 nextc = makestrspace((strlen(s) + 1) * 8, cmdnextc);
4425 while ((c = *p++) != '\0') {
4433 if ((subtype & VSTYPE) == VSLENGTH)
4439 str = "\"}" + !(quoted & 1);
4446 #if ENABLE_SH_MATH_SUPPORT
4461 if ((subtype & VSTYPE) != VSNORMAL)
4463 str = vstype[subtype & VSTYPE];
4464 if (subtype & VSNUL)
4473 /* These can only happen inside quotes */
4486 while ((c = *str++) != '\0') {
4489 } /* while *p++ not NUL */
4492 USTPUTC('"', nextc);
4498 /* cmdtxt() and cmdlist() call each other */
4499 static void cmdtxt(union node *n);
4502 cmdlist(union node *np, int sep)
4504 for (; np; np = np->narg.next) {
4508 if (sep && np->narg.next)
4514 cmdtxt(union node *n)
4517 struct nodelist *lp;
4528 lp = n->npipe.cmdlist;
4546 cmdtxt(n->nbinary.ch1);
4562 cmdtxt(n->nif.test);
4564 if (n->nif.elsepart) {
4565 cmdtxt(n->nif.ifpart);
4567 n = n->nif.elsepart;
4585 cmdtxt(n->nbinary.ch1);
4595 cmdputs(n->nfor.var);
4597 cmdlist(n->nfor.args, 1);
4602 cmdputs(n->narg.text);
4606 cmdlist(n->ncmd.args, 1);
4607 cmdlist(n->ncmd.redirect, 0);
4620 cmdputs(n->ncase.expr->narg.text);
4622 for (np = n->ncase.cases; np; np = np->nclist.next) {
4623 cmdtxt(np->nclist.pattern);
4625 cmdtxt(np->nclist.body);
4639 #if ENABLE_ASH_BASH_COMPAT
4654 cmdputs(utoa(n->nfile.fd));
4656 if (n->type == NTOFD || n->type == NFROMFD) {
4657 cmdputs(utoa(n->ndup.dupfd));
4666 commandtext(union node *n)
4670 STARTSTACKSTR(cmdnextc);
4672 name = stackblock();
4673 TRACE(("commandtext: name %p, end %p\n\t\"%s\"\n",
4674 name, cmdnextc, cmdnextc));
4675 return ckstrdup(name);
4680 * Fork off a subshell. If we are doing job control, give the subshell its
4681 * own process group. Jp is a job structure that the job is to be added to.
4682 * N is the command that will be evaluated by the child. Both jp and n may
4683 * be NULL. The mode parameter can be one of the following:
4684 * FORK_FG - Fork off a foreground process.
4685 * FORK_BG - Fork off a background process.
4686 * FORK_NOJOB - Like FORK_FG, but don't give the process its own
4687 * process group even if job control is on.
4689 * When job control is turned off, background processes have their standard
4690 * input redirected to /dev/null (except for the second and later processes
4693 * Called with interrupts off.
4696 * Clear traps on a fork.
4703 for (tp = trap; tp < &trap[NSIG]; tp++) {
4704 if (*tp && **tp) { /* trap not NULL or "" (SIG_IGN) */
4706 if (trap_ptr == trap)
4708 /* else: it "belongs" to trap_ptr vector, don't free */
4710 if ((tp - trap) != 0)
4711 setsignal(tp - trap);
4718 /* Lives far away from here, needed for forkchild */
4719 static void closescript(void);
4721 /* Called after fork(), in child */
4722 static NOINLINE void
4723 forkchild(struct job *jp, union node *n, int mode)
4727 TRACE(("Child shell %d\n", getpid()));
4731 /* man bash: "Non-builtin commands run by bash have signal handlers
4732 * set to the values inherited by the shell from its parent".
4733 * Do we do it correctly? */
4737 if (mode == FORK_NOJOB /* is it `xxx` ? */
4738 && n && n->type == NCMD /* is it single cmd? */
4739 /* && n->ncmd.args->type == NARG - always true? */
4740 && n->ncmd.args && strcmp(n->ncmd.args->narg.text, "trap") == 0
4741 && n->ncmd.args->narg.next == NULL /* "trap" with no arguments */
4742 /* && n->ncmd.args->narg.backquote == NULL - do we need to check this? */
4744 TRACE(("Trap hack\n"));
4745 /* Awful hack for `trap` or $(trap).
4747 * http://www.opengroup.org/onlinepubs/009695399/utilities/trap.html
4748 * contains an example where "trap" is executed in a subshell:
4750 * save_traps=$(trap)
4752 * eval "$save_traps"
4754 * Standard does not say that "trap" in subshell shall print
4755 * parent shell's traps. It only says that its output
4756 * must have suitable form, but then, in the above example
4757 * (which is not supposed to be normative), it implies that.
4759 * bash (and probably other shell) does implement it
4760 * (traps are reset to defaults, but "trap" still shows them),
4761 * but as a result, "trap" logic is hopelessly messed up:
4764 * trap -- 'echo Ho' SIGWINCH <--- we have a handler
4765 * # (trap) <--- trap is in subshell - no output (correct, traps are reset)
4766 * # true | trap <--- trap is in subshell - no output (ditto)
4767 * # echo `true | trap` <--- in subshell - output (but traps are reset!)
4768 * trap -- 'echo Ho' SIGWINCH
4769 * # echo `(trap)` <--- in subshell in subshell - output
4770 * trap -- 'echo Ho' SIGWINCH
4771 * # echo `true | (trap)` <--- in subshell in subshell in subshell - output!
4772 * trap -- 'echo Ho' SIGWINCH
4774 * The rules when to forget and when to not forget traps
4775 * get really complex and nonsensical.
4777 * Our solution: ONLY bare $(trap) or `trap` is special.
4779 /* Save trap handler strings for trap builtin to print */
4780 trap_ptr = xmemdup(trap, sizeof(trap));
4781 /* Fall through into clearing traps */
4785 /* do job control only in root shell */
4787 if (mode != FORK_NOJOB && jp->jobctl && oldlvl == 0) {
4790 if (jp->nprocs == 0)
4793 pgrp = jp->ps[0].ps_pid;
4794 /* this can fail because we are doing it in the parent also */
4796 if (mode == FORK_FG)
4797 xtcsetpgrp(ttyfd, pgrp);
4802 if (mode == FORK_BG) {
4803 /* man bash: "When job control is not in effect,
4804 * asynchronous commands ignore SIGINT and SIGQUIT" */
4807 if (jp->nprocs == 0) {
4809 if (open(bb_dev_null, O_RDONLY) != 0)
4810 ash_msg_and_raise_error("can't open '%s'", bb_dev_null);
4814 if (iflag) { /* why if iflag only? */
4819 * "In all cases, bash ignores SIGQUIT. Non-builtin
4820 * commands run by bash have signal handlers
4821 * set to the values inherited by the shell
4823 * Take care of the second rule: */
4827 if (n && n->type == NCMD
4828 && n->ncmd.args && strcmp(n->ncmd.args->narg.text, "jobs") == 0
4830 TRACE(("Job hack\n"));
4831 /* "jobs": we do not want to clear job list for it,
4832 * instead we remove only _its_ own_ job from job list.
4833 * This makes "jobs .... | cat" more useful.
4839 for (jp = curjob; jp; jp = jp->prev_job)
4844 /* Called after fork(), in parent */
4846 #define forkparent(jp, n, mode, pid) forkparent(jp, mode, pid)
4849 forkparent(struct job *jp, union node *n, int mode, pid_t pid)
4851 TRACE(("In parent shell: child = %d\n", pid));
4853 while (jobless && dowait(DOWAIT_NONBLOCK, NULL) > 0)
4859 if (mode != FORK_NOJOB && jp->jobctl) {
4862 if (jp->nprocs == 0)
4865 pgrp = jp->ps[0].ps_pid;
4866 /* This can fail because we are doing it in the child also */
4870 if (mode == FORK_BG) {
4871 backgndpid = pid; /* set $! */
4872 set_curjob(jp, CUR_RUNNING);
4875 struct procstat *ps = &jp->ps[jp->nprocs++];
4878 ps->ps_cmd = nullstr;
4880 if (doing_jobctl && n)
4881 ps->ps_cmd = commandtext(n);
4887 forkshell(struct job *jp, union node *n, int mode)
4891 TRACE(("forkshell(%%%d, %p, %d) called\n", jobno(jp), n, mode));
4894 TRACE(("Fork failed, errno=%d", errno));
4897 ash_msg_and_raise_error("can't fork");
4900 CLEAR_RANDOM_T(&random_gen); /* or else $RANDOM repeats in child */
4901 forkchild(jp, n, mode);
4903 forkparent(jp, n, mode, pid);
4909 * Wait for job to finish.
4911 * Under job control we have the problem that while a child process
4912 * is running interrupts generated by the user are sent to the child
4913 * but not to the shell. This means that an infinite loop started by
4914 * an interactive user may be hard to kill. With job control turned off,
4915 * an interactive user may place an interactive program inside a loop.
4916 * If the interactive program catches interrupts, the user doesn't want
4917 * these interrupts to also abort the loop. The approach we take here
4918 * is to have the shell ignore interrupt signals while waiting for a
4919 * foreground process to terminate, and then send itself an interrupt
4920 * signal if the child process was terminated by an interrupt signal.
4921 * Unfortunately, some programs want to do a bit of cleanup and then
4922 * exit on interrupt; unless these processes terminate themselves by
4923 * sending a signal to themselves (instead of calling exit) they will
4924 * confuse this approach.
4926 * Called with interrupts off.
4929 waitforjob(struct job *jp)
4933 TRACE(("waitforjob(%%%d) called\n", jobno(jp)));
4936 while (jp->state == JOBRUNNING) {
4937 /* In non-interactive shells, we _can_ get
4938 * a keyboard signal here and be EINTRed,
4939 * but we just loop back, waiting for command to complete.
4942 * "If bash is waiting for a command to complete and receives
4943 * a signal for which a trap has been set, the trap
4944 * will not be executed until the command completes."
4946 * Reality is that even if trap is not set, bash
4947 * will not act on the signal until command completes.
4948 * Try this. sleep5intoff.c:
4949 * #include <signal.h>
4950 * #include <unistd.h>
4953 * sigemptyset(&set);
4954 * sigaddset(&set, SIGINT);
4955 * sigaddset(&set, SIGQUIT);
4956 * sigprocmask(SIG_BLOCK, &set, NULL);
4960 * $ bash -c './sleep5intoff; echo hi'
4961 * ^C^C^C^C <--- pressing ^C once a second
4963 * $ bash -c './sleep5intoff; echo hi'
4964 * ^\^\^\^\hi <--- pressing ^\ (SIGQUIT)
4967 dowait(DOWAIT_BLOCK, jp);
4974 xtcsetpgrp(ttyfd, rootpid);
4976 * This is truly gross.
4977 * If we're doing job control, then we did a TIOCSPGRP which
4978 * caused us (the shell) to no longer be in the controlling
4979 * session -- so we wouldn't have seen any ^C/SIGINT. So, we
4980 * intuit from the subprocess exit status whether a SIGINT
4981 * occurred, and if so interrupt ourselves. Yuck. - mycroft
4983 if (jp->sigint) /* TODO: do the same with all signals */
4984 raise(SIGINT); /* ... by raise(jp->sig) instead? */
4986 if (jp->state == JOBDONE)
4993 * return 1 if there are stopped jobs, otherwise 0
5005 if (jp && jp->state == JOBSTOPPED) {
5006 out2str("You have stopped jobs.\n");
5015 /* ============ redir.c
5017 * Code for dealing with input/output redirection.
5022 #define EMPTY -2 /* marks an unused slot in redirtab */
5023 #define CLOSED -3 /* marks a slot of previously-closed fd */
5026 * Open a file in noclobber mode.
5027 * The code was copied from bash.
5030 noclobberopen(const char *fname)
5033 struct stat finfo, finfo2;
5036 * If the file exists and is a regular file, return an error
5039 r = stat(fname, &finfo);
5040 if (r == 0 && S_ISREG(finfo.st_mode)) {
5046 * If the file was not present (r != 0), make sure we open it
5047 * exclusively so that if it is created before we open it, our open
5048 * will fail. Make sure that we do not truncate an existing file.
5049 * Note that we don't turn on O_EXCL unless the stat failed -- if the
5050 * file was not a regular file, we leave O_EXCL off.
5053 return open(fname, O_WRONLY|O_CREAT|O_EXCL, 0666);
5054 fd = open(fname, O_WRONLY|O_CREAT, 0666);
5056 /* If the open failed, return the file descriptor right away. */
5061 * OK, the open succeeded, but the file may have been changed from a
5062 * non-regular file to a regular file between the stat and the open.
5063 * We are assuming that the O_EXCL open handles the case where FILENAME
5064 * did not exist and is symlinked to an existing file between the stat
5069 * If we can open it and fstat the file descriptor, and neither check
5070 * revealed that it was a regular file, and the file has not been
5071 * replaced, return the file descriptor.
5073 if (fstat(fd, &finfo2) == 0
5074 && !S_ISREG(finfo2.st_mode)
5075 && finfo.st_dev == finfo2.st_dev
5076 && finfo.st_ino == finfo2.st_ino
5081 /* The file has been replaced. badness. */
5088 * Handle here documents. Normally we fork off a process to write the
5089 * data to a pipe. If the document is short, we can stuff the data in
5090 * the pipe without forking.
5092 /* openhere needs this forward reference */
5093 static void expandhere(union node *arg, int fd);
5095 openhere(union node *redir)
5101 ash_msg_and_raise_error("pipe call failed");
5102 if (redir->type == NHERE) {
5103 len = strlen(redir->nhere.doc->narg.text);
5104 if (len <= PIPE_BUF) {
5105 full_write(pip[1], redir->nhere.doc->narg.text, len);
5109 if (forkshell((struct job *)NULL, (union node *)NULL, FORK_NOJOB) == 0) {
5112 ignoresig(SIGINT); //signal(SIGINT, SIG_IGN);
5113 ignoresig(SIGQUIT); //signal(SIGQUIT, SIG_IGN);
5114 ignoresig(SIGHUP); //signal(SIGHUP, SIG_IGN);
5115 ignoresig(SIGTSTP); //signal(SIGTSTP, SIG_IGN);
5116 signal(SIGPIPE, SIG_DFL);
5117 if (redir->type == NHERE)
5118 full_write(pip[1], redir->nhere.doc->narg.text, len);
5120 expandhere(redir->nhere.doc, pip[1]);
5121 _exit(EXIT_SUCCESS);
5129 openredirect(union node *redir)
5134 switch (redir->nfile.type) {
5135 /* Can't happen, our single caller does this itself */
5141 return openhere(redir);
5144 /* For N[X]HERE, reading redir->nfile.expfname would touch beyond
5145 * allocated space. Do it only when we know it is safe.
5147 fname = redir->nfile.expfname;
5149 switch (redir->nfile.type) {
5155 f = open(fname, O_RDONLY);
5160 f = open(fname, O_RDWR|O_CREAT, 0666);
5165 #if ENABLE_ASH_BASH_COMPAT
5168 /* Take care of noclobber mode. */
5170 f = noclobberopen(fname);
5177 f = open(fname, O_WRONLY|O_CREAT|O_TRUNC, 0666);
5182 f = open(fname, O_WRONLY|O_CREAT|O_APPEND, 0666);
5190 ash_msg_and_raise_error("can't create %s: %s", fname, errmsg(errno, "nonexistent directory"));
5192 ash_msg_and_raise_error("can't open %s: %s", fname, errmsg(errno, "no such file"));
5196 * Copy a file descriptor to be >= to. Returns -1
5197 * if the source file descriptor is closed, EMPTY if there are no unused
5198 * file descriptors left.
5200 /* 0x800..00: bit to set in "to" to request dup2 instead of fcntl(F_DUPFD).
5201 * old code was doing close(to) prior to copyfd() to achieve the same */
5203 COPYFD_EXACT = (int)~(INT_MAX),
5204 COPYFD_RESTORE = (int)((unsigned)COPYFD_EXACT >> 1),
5207 copyfd(int from, int to)
5211 if (to & COPYFD_EXACT) {
5212 to &= ~COPYFD_EXACT;
5214 newfd = dup2(from, to);
5216 newfd = fcntl(from, F_DUPFD, to);
5219 if (errno == EMFILE)
5221 /* Happens when source fd is not open: try "echo >&99" */
5222 ash_msg_and_raise_error("%d: %m", from);
5227 /* Struct def and variable are moved down to the first usage site */
5232 struct redirtab *next;
5235 struct two_fd_t two_fd[];
5237 #define redirlist (G_var.redirlist)
5239 static int need_to_remember(struct redirtab *rp, int fd)
5243 if (!rp) /* remembering was not requested */
5246 for (i = 0; i < rp->pair_count; i++) {
5247 if (rp->two_fd[i].orig == fd) {
5248 /* already remembered */
5255 /* "hidden" fd is a fd used to read scripts, or a copy of such */
5256 static int is_hidden_fd(struct redirtab *rp, int fd)
5259 struct parsefile *pf;
5263 /* Check open scripts' fds */
5266 /* We skip pf_fd == 0 case because of the following case:
5267 * $ ash # running ash interactively
5269 * and in script.sh: "exec 9>&0".
5270 * Even though top-level pf_fd _is_ 0,
5271 * it's still ok to use it: "read" builtin uses it,
5272 * why should we cripple "exec" builtin?
5274 if (pf->pf_fd > 0 && fd == pf->pf_fd) {
5282 /* Check saved fds of redirects */
5283 fd |= COPYFD_RESTORE;
5284 for (i = 0; i < rp->pair_count; i++) {
5285 if (rp->two_fd[i].copy == fd) {
5293 * Process a list of redirection commands. If the REDIR_PUSH flag is set,
5294 * old file descriptors are stashed away so that the redirection can be
5295 * undone by calling popredir.
5297 /* flags passed to redirect */
5298 #define REDIR_PUSH 01 /* save previous values of file descriptors */
5299 #define REDIR_SAVEFD2 03 /* set preverrout */
5301 redirect(union node *redir, int flags)
5303 struct redirtab *sv;
5308 int copied_fd2 = -1;
5318 if (flags & REDIR_PUSH) {
5319 union node *tmp = redir;
5322 #if ENABLE_ASH_BASH_COMPAT
5323 if (tmp->nfile.type == NTO2)
5326 tmp = tmp->nfile.next;
5328 sv = ckmalloc(sizeof(*sv) + sv_pos * sizeof(sv->two_fd[0]));
5329 sv->next = redirlist;
5330 sv->pair_count = sv_pos;
5332 sv->nullredirs = g_nullredirs - 1;
5334 while (sv_pos > 0) {
5336 sv->two_fd[sv_pos].orig = sv->two_fd[sv_pos].copy = EMPTY;
5342 fd = redir->nfile.fd;
5343 if (redir->nfile.type == NTOFD || redir->nfile.type == NFROMFD) {
5344 right_fd = redir->ndup.dupfd;
5345 //bb_error_msg("doing %d > %d", fd, right_fd);
5346 /* redirect from/to same file descriptor? */
5349 /* "echo >&10" and 10 is a fd opened to a sh script? */
5350 if (is_hidden_fd(sv, right_fd)) {
5351 errno = EBADF; /* as if it is closed */
5352 ash_msg_and_raise_error("%d: %m", right_fd);
5356 newfd = openredirect(redir); /* always >= 0 */
5358 /* Descriptor wasn't open before redirect.
5359 * Mark it for close in the future */
5360 if (need_to_remember(sv, fd)) {
5361 goto remember_to_close;
5366 #if ENABLE_ASH_BASH_COMPAT
5369 if (need_to_remember(sv, fd)) {
5370 /* Copy old descriptor */
5371 /* Careful to not accidentally "save"
5372 * to the same fd as right side fd in N>&M */
5373 int minfd = right_fd < 10 ? 10 : right_fd + 1;
5374 i = fcntl(fd, F_DUPFD, minfd);
5375 /* You'd expect copy to be CLOEXECed. Currently these extra "saved" fds
5376 * are closed in popredir() in the child, preventing them from leaking
5377 * into child. (popredir() also cleans up the mess in case of failures)
5382 /* Strange error (e.g. "too many files" EMFILE?) */
5386 ash_msg_and_raise_error("%d: %m", fd);
5389 /* EBADF: it is not open - good, remember to close it */
5392 } else { /* fd is open, save its copy */
5393 /* "exec fd>&-" should not close fds
5394 * which point to script file(s).
5395 * Force them to be restored afterwards */
5396 if (is_hidden_fd(sv, fd))
5397 i |= COPYFD_RESTORE;
5401 sv->two_fd[sv_pos].orig = fd;
5402 sv->two_fd[sv_pos].copy = i;
5406 /* NTOFD/NFROMFD: copy redir->ndup.dupfd to fd */
5407 if (redir->ndup.dupfd < 0) { /* "fd>&-" */
5408 /* Don't want to trigger debugging */
5412 copyfd(redir->ndup.dupfd, fd | COPYFD_EXACT);
5414 } else if (fd != newfd) { /* move newfd to fd */
5415 copyfd(newfd, fd | COPYFD_EXACT);
5416 #if ENABLE_ASH_BASH_COMPAT
5417 if (!(redir->nfile.type == NTO2 && fd == 2))
5421 #if ENABLE_ASH_BASH_COMPAT
5422 if (redir->nfile.type == NTO2 && fd == 1) {
5423 /* We already redirected it to fd 1, now copy it to 2 */
5429 } while ((redir = redir->nfile.next) != NULL);
5432 if ((flags & REDIR_SAVEFD2) && copied_fd2 >= 0)
5433 preverrout_fd = copied_fd2;
5437 * Undo the effects of the last redirection.
5440 popredir(int drop, int restore)
5442 struct redirtab *rp;
5445 if (--g_nullredirs >= 0 || redirlist == NULL)
5449 for (i = 0; i < rp->pair_count; i++) {
5450 int fd = rp->two_fd[i].orig;
5451 int copy = rp->two_fd[i].copy;
5452 if (copy == CLOSED) {
5457 if (copy != EMPTY) {
5458 if (!drop || (restore && (copy & COPYFD_RESTORE))) {
5459 copy &= ~COPYFD_RESTORE;
5461 copyfd(copy, fd | COPYFD_EXACT);
5463 close(copy & ~COPYFD_RESTORE);
5466 redirlist = rp->next;
5467 g_nullredirs = rp->nullredirs;
5473 * Undo all redirections. Called on error or interrupt.
5477 * Discard all saved file descriptors.
5480 clearredir(int drop)
5486 popredir(drop, /*restore:*/ 0);
5491 redirectsafe(union node *redir, int flags)
5494 volatile int saveint;
5495 struct jmploc *volatile savehandler = exception_handler;
5496 struct jmploc jmploc;
5499 /* "echo 9>/dev/null; echo >&9; echo result: $?" - result should be 1, not 2! */
5500 err = setjmp(jmploc.loc); // huh?? was = setjmp(jmploc.loc) * 2;
5502 exception_handler = &jmploc;
5503 redirect(redir, flags);
5505 exception_handler = savehandler;
5506 if (err && exception_type != EXERROR)
5507 longjmp(exception_handler->loc, 1);
5508 RESTORE_INT(saveint);
5513 /* ============ Routines to expand arguments to commands
5515 * We have to deal with backquotes, shell variables, and file metacharacters.
5518 #if ENABLE_SH_MATH_SUPPORT
5520 ash_arith(const char *s)
5522 arith_state_t math_state;
5525 math_state.lookupvar = lookupvar;
5526 math_state.setvar = setvar0;
5527 //math_state.endofname = endofname;
5530 result = arith(&math_state, s);
5531 if (math_state.errmsg)
5532 ash_msg_and_raise_error(math_state.errmsg);
5542 #define EXP_FULL 0x1 /* perform word splitting & file globbing */
5543 #define EXP_TILDE 0x2 /* do normal tilde expansion */
5544 #define EXP_VARTILDE 0x4 /* expand tildes in an assignment */
5545 #define EXP_REDIR 0x8 /* file glob for a redirection (1 match only) */
5546 #define EXP_CASE 0x10 /* keeps quotes around for CASE pattern */
5547 #define EXP_QPAT 0x20 /* pattern in quoted parameter expansion */
5548 #define EXP_VARTILDE2 0x40 /* expand tildes after colons only */
5549 #define EXP_WORD 0x80 /* expand word in parameter expansion */
5550 #define EXP_QUOTED 0x100 /* expand word in double quotes */
5554 #define RMESCAPE_ALLOC 0x1 /* Allocate a new string */
5555 #define RMESCAPE_GLOB 0x2 /* Add backslashes for glob */
5556 #define RMESCAPE_GROW 0x8 /* Grow strings instead of stalloc */
5557 #define RMESCAPE_HEAP 0x10 /* Malloc strings instead of stalloc */
5558 #define RMESCAPE_SLASH 0x20 /* Stop globbing after slash */
5560 /* Add CTLESC when necessary. */
5561 #define QUOTES_ESC (EXP_FULL | EXP_CASE | EXP_QPAT | EXP_REDIR)
5562 /* Do not skip NUL characters. */
5563 #define QUOTES_KEEPNUL EXP_TILDE
5566 * Structure specifying which parts of the string should be searched
5567 * for IFS characters.
5570 struct ifsregion *next; /* next region in list */
5571 int begoff; /* offset of start of region */
5572 int endoff; /* offset of end of region */
5573 int nulonly; /* search for nul bytes only */
5577 struct strlist *list;
5578 struct strlist **lastp;
5581 /* output of current string */
5582 static char *expdest;
5583 /* list of back quote expressions */
5584 static struct nodelist *argbackq;
5585 /* first struct in list of ifs regions */
5586 static struct ifsregion ifsfirst;
5587 /* last struct in list */
5588 static struct ifsregion *ifslastp;
5589 /* holds expanded arg list */
5590 static struct arglist exparg;
5595 #if !ENABLE_SH_MATH_SUPPORT
5596 /* cvtnum() is used even if math support is off (to prepare $? values and such) */
5597 typedef long arith_t;
5598 # define ARITH_FMT "%ld"
5605 expdest = makestrspace(sizeof(arith_t)*3 + 2, expdest);
5606 len = fmtstr(expdest, sizeof(arith_t)*3 + 2, ARITH_FMT, num);
5607 STADJUST(len, expdest);
5612 esclen(const char *start, const char *p)
5616 while (p > start && (unsigned char)*--p == CTLESC) {
5623 * Remove any CTLESC characters from a string.
5626 rmescapes(char *str, int flag)
5628 static const char qchars[] ALIGN1 = {
5629 IF_ASH_BASH_COMPAT('/',) CTLESC, CTLQUOTEMARK, '\0' };
5633 unsigned protect_against_glob;
5635 IF_ASH_BASH_COMPAT(unsigned slash = flag & RMESCAPE_SLASH;)
5637 p = strpbrk(str, qchars IF_ASH_BASH_COMPAT(+ !slash));
5643 if (flag & RMESCAPE_ALLOC) {
5644 size_t len = p - str;
5645 size_t fulllen = len + strlen(p) + 1;
5647 if (flag & RMESCAPE_GROW) {
5648 int strloc = str - (char *)stackblock();
5649 r = makestrspace(fulllen, expdest);
5650 /* p and str may be invalidated by makestrspace */
5651 str = (char *)stackblock() + strloc;
5653 } else if (flag & RMESCAPE_HEAP) {
5654 r = ckmalloc(fulllen);
5656 r = stalloc(fulllen);
5660 q = (char *)memcpy(q, str, len) + len;
5665 globbing = flag & RMESCAPE_GLOB;
5666 protect_against_glob = globbing;
5668 if ((unsigned char)*p == CTLQUOTEMARK) {
5669 // Note: both inquotes and protect_against_glob only affect whether
5670 inquotes = ~inquotes;
5672 protect_against_glob = globbing;
5675 if ((unsigned char)*p == CTLESC) {
5679 ash_msg_and_raise_error("CTLESC at EOL (shouldn't happen)");
5681 if (protect_against_glob) {
5684 } else if (*p == '\\' && !inquotes) {
5685 /* naked back slash */
5686 protect_against_glob = 0;
5689 #if ENABLE_ASH_BASH_COMPAT
5690 else if (*p == '/' && slash) {
5691 /* stop handling globbing and mark location of slash */
5692 globbing = slash = 0;
5696 protect_against_glob = globbing;
5701 if (flag & RMESCAPE_GROW) {
5703 STADJUST(q - r + 1, expdest);
5707 #define pmatch(a, b) !fnmatch((a), (b), 0)
5710 * Prepare a pattern for a expmeta (internal glob(3)) call.
5712 * Returns an stalloced string.
5715 preglob(const char *pattern, int flag)
5717 return rmescapes((char *)pattern, flag | RMESCAPE_GLOB);
5721 * Put a string on the stack.
5724 memtodest(const char *p, size_t len, int syntax, int quotes)
5731 q = makestrspace((quotes & QUOTES_ESC) ? len * 2 : len, expdest);
5734 unsigned char c = *p++;
5736 int n = SIT(c, syntax);
5737 if ((quotes & QUOTES_ESC)
5739 || (((quotes & EXP_FULL) || syntax != BASESYNTAX)
5745 } else if (!(quotes & QUOTES_KEEPNUL))
5754 strtodest(const char *p, int syntax, int quotes)
5756 size_t len = strlen(p);
5757 memtodest(p, len, syntax, quotes);
5762 * Record the fact that we have to scan this region of the
5763 * string for IFS characters.
5766 recordregion(int start, int end, int nulonly)
5768 struct ifsregion *ifsp;
5770 if (ifslastp == NULL) {
5774 ifsp = ckzalloc(sizeof(*ifsp));
5775 /*ifsp->next = NULL; - ckzalloc did it */
5776 ifslastp->next = ifsp;
5780 ifslastp->begoff = start;
5781 ifslastp->endoff = end;
5782 ifslastp->nulonly = nulonly;
5786 removerecordregions(int endoff)
5788 if (ifslastp == NULL)
5791 if (ifsfirst.endoff > endoff) {
5792 while (ifsfirst.next) {
5793 struct ifsregion *ifsp;
5795 ifsp = ifsfirst.next->next;
5796 free(ifsfirst.next);
5797 ifsfirst.next = ifsp;
5800 if (ifsfirst.begoff > endoff) {
5803 ifslastp = &ifsfirst;
5804 ifsfirst.endoff = endoff;
5809 ifslastp = &ifsfirst;
5810 while (ifslastp->next && ifslastp->next->begoff < endoff)
5811 ifslastp = ifslastp->next;
5812 while (ifslastp->next) {
5813 struct ifsregion *ifsp;
5815 ifsp = ifslastp->next->next;
5816 free(ifslastp->next);
5817 ifslastp->next = ifsp;
5820 if (ifslastp->endoff > endoff)
5821 ifslastp->endoff = endoff;
5825 exptilde(char *startp, char *p, int flags)
5831 int quotes = flags & QUOTES_ESC;
5835 while ((c = *++p) != '\0') {
5842 if (flags & EXP_VARTILDE)
5852 if (*name == '\0') {
5853 home = lookupvar("HOME");
5855 pw = getpwnam(name);
5860 if (!home || !*home)
5863 strtodest(home, SQSYNTAX, quotes);
5871 * Execute a command inside back quotes. If it's a builtin command, we
5872 * want to save its output in a block obtained from malloc. Otherwise
5873 * we fork off a subprocess and get the output of the command via a pipe.
5874 * Should be called with interrupts off.
5876 struct backcmd { /* result of evalbackcmd */
5877 int fd; /* file descriptor to read from */
5878 int nleft; /* number of chars in buffer */
5879 char *buf; /* buffer */
5880 struct job *jp; /* job structure for command */
5883 /* These forward decls are needed to use "eval" code for backticks handling: */
5884 #define EV_EXIT 01 /* exit after evaluating tree */
5885 static int evaltree(union node *, int);
5887 static void FAST_FUNC
5888 evalbackcmd(union node *n, struct backcmd *result)
5899 saveherefd = herefd;
5907 ash_msg_and_raise_error("pipe call failed");
5908 jp = makejob(/*n,*/ 1);
5909 if (forkshell(jp, n, FORK_NOJOB) == 0) {
5914 copyfd(pip[1], 1 | COPYFD_EXACT);
5918 evaltree(n, EV_EXIT); /* actually evaltreenr... */
5922 result->fd = pip[0];
5925 herefd = saveherefd;
5927 TRACE(("evalbackcmd done: fd=%d buf=0x%x nleft=%d jp=0x%x\n",
5928 result->fd, result->buf, result->nleft, result->jp));
5932 * Expand stuff in backwards quotes.
5935 expbackq(union node *cmd, int flag)
5943 int syntax = flag & EXP_QUOTED ? DQSYNTAX : BASESYNTAX;
5944 struct stackmark smark;
5947 startloc = expdest - (char *)stackblock();
5948 pushstackmark(&smark, startloc);
5949 evalbackcmd(cmd, &in);
5950 popstackmark(&smark);
5957 memtodest(p, i, syntax, flag & QUOTES_ESC);
5961 i = nonblock_immune_read(in.fd, buf, sizeof(buf));
5962 TRACE(("expbackq: read returns %d\n", i));
5971 back_exitstatus = waitforjob(in.jp);
5975 /* Eat all trailing newlines */
5977 for (; dest > (char *)stackblock() && dest[-1] == '\n';)
5981 if (!(flag & EXP_QUOTED))
5982 recordregion(startloc, dest - (char *)stackblock(), 0);
5983 TRACE(("evalbackq: size:%d:'%.*s'\n",
5984 (int)((dest - (char *)stackblock()) - startloc),
5985 (int)((dest - (char *)stackblock()) - startloc),
5986 stackblock() + startloc));
5989 #if ENABLE_SH_MATH_SUPPORT
5991 * Expand arithmetic expression. Backup to start of expression,
5992 * evaluate, place result in (backed up) result, adjust string position.
6004 * This routine is slightly over-complicated for
6005 * efficiency. Next we scan backwards looking for the
6006 * start of arithmetic.
6008 start = stackblock();
6015 while ((unsigned char)*p != CTLARI) {
6019 ash_msg_and_raise_error("missing CTLARI (shouldn't happen)");
6024 esc = esclen(start, p);
6034 removerecordregions(begoff);
6038 if (flag & QUOTES_ESC)
6039 rmescapes(p + 1, 0);
6041 len = cvtnum(ash_arith(p + 1));
6043 if (!(flag & EXP_QUOTED))
6044 recordregion(begoff, begoff + len, 0);
6048 /* argstr needs it */
6049 static char *evalvar(char *p, int flags, struct strlist *var_str_list);
6052 * Perform variable and command substitution. If EXP_FULL is set, output CTLESC
6053 * characters to allow for further processing. Otherwise treat
6054 * $@ like $* since no splitting will be performed.
6056 * var_str_list (can be NULL) is a list of "VAR=val" strings which take precedence
6057 * over shell varables. Needed for "A=a B=$A; echo $B" case - we use it
6058 * for correct expansion of "B=$A" word.
6061 argstr(char *p, int flags, struct strlist *var_str_list)
6063 static const char spclchars[] ALIGN1 = {
6071 #if ENABLE_SH_MATH_SUPPORT
6076 const char *reject = spclchars;
6077 int breakall = (flags & (EXP_WORD | EXP_QUOTED)) == EXP_WORD;
6082 if (!(flags & EXP_VARTILDE)) {
6084 } else if (flags & EXP_VARTILDE2) {
6089 if (flags & EXP_TILDE) {
6092 flags &= ~EXP_TILDE;
6096 p = exptilde(p, q, flags);
6099 startloc = expdest - (char *)stackblock();
6103 length += strcspn(p + length, reject);
6107 IF_SH_MATH_SUPPORT(|| c == CTLENDARI)
6109 /* c == '=' || c == ':' || c == CTLENDARI */
6115 expdest = stack_nputstr(p, length, expdest);
6116 newloc = expdest - (char *)stackblock();
6117 if (breakall && !inquotes && newloc > startloc) {
6118 recordregion(startloc, newloc, 0);
6129 if (flags & EXP_VARTILDE2) {
6133 flags |= EXP_VARTILDE2;
6138 * sort of a hack - expand tildes in variable
6139 * assignments (after the first '=' and after ':'s).
6148 case CTLENDVAR: /* ??? */
6151 inquotes ^= EXP_QUOTED;
6152 /* "$@" syntax adherence hack */
6153 if (inquotes && !memcmp(p, dolatstr + 1, DOLATSTRLEN - 1)) {
6154 p = evalvar(p + 1, flags | inquotes, /* var_str_list: */ NULL) + 1;
6158 if (flags & QUOTES_ESC) {
6169 * Quoted parameter expansion pattern: remove quote
6170 * unless inside inner quotes or we have a literal
6173 if (((flags | inquotes) & (EXP_QPAT | EXP_QUOTED)) ==
6174 EXP_QPAT && *p != '\\')
6179 TRACE(("argstr: evalvar('%s')\n", p));
6180 p = evalvar(p, flags | inquotes, var_str_list);
6181 TRACE(("argstr: evalvar:'%s'\n", (char *)stackblock()));
6184 expbackq(argbackq->n, flags | inquotes);
6185 argbackq = argbackq->next;
6187 #if ENABLE_SH_MATH_SUPPORT
6190 expari(flags | inquotes);
6199 scanleft(char *startp, char *rmesc, char *rmescend UNUSED_PARAM,
6200 char *pattern, int quotes, int zero)
6209 const char *s = loc2;
6216 match = pmatch(pattern, s);
6221 if (quotes && (unsigned char)*loc == CTLESC)
6230 scanright(char *startp, char *rmesc, char *rmescend,
6231 char *pattern, int quotes, int match_at_start)
6233 #if !ENABLE_ASH_OPTIMIZE_FOR_SIZE
6234 int try2optimize = match_at_start;
6240 /* If we called by "${v/pattern/repl}" or "${v//pattern/repl}":
6241 * startp="escaped_value_of_v" rmesc="raw_value_of_v"
6242 * rmescend=""(ptr to NUL in rmesc) pattern="pattern" quotes=match_at_start=1
6244 * loc starts at NUL at the end of startp, loc2 starts at the end of rmesc,
6245 * and on each iteration they go back two/one char until they reach the beginning.
6246 * We try to find a match in "raw_value_of_v", "raw_value_of_", "raw_value_of" etc.
6248 /* TODO: document in what other circumstances we are called. */
6250 for (loc = pattern - 1, loc2 = rmescend; loc >= startp; loc2--) {
6253 const char *s = loc2;
6254 if (match_at_start) {
6258 match = pmatch(pattern, s);
6259 //bb_error_msg("pmatch(pattern:'%s',s:'%s'):%d", pattern, s, match);
6263 #if !ENABLE_ASH_OPTIMIZE_FOR_SIZE
6265 /* Maybe we can optimize this:
6266 * if pattern ends with unescaped *, we can avoid checking
6267 * shorter strings: if "foo*" doesnt match "raw_value_of_v",
6268 * it wont match truncated "raw_value_of_" strings too.
6270 unsigned plen = strlen(pattern);
6271 /* Does it end with "*"? */
6272 if (plen != 0 && pattern[--plen] == '*') {
6273 /* "xxxx*" is not escaped */
6274 /* "xxx\*" is escaped */
6275 /* "xx\\*" is not escaped */
6276 /* "x\\\*" is escaped */
6278 while (plen != 0 && pattern[--plen] == '\\')
6281 break; /* ends with unescaped "*" */
6289 esc = esclen(startp, loc);
6300 static void varunset(const char *, const char *, const char *, int) NORETURN;
6302 varunset(const char *end, const char *var, const char *umsg, int varflags)
6308 msg = "parameter not set";
6310 if ((unsigned char)*end == CTLENDVAR) {
6311 if (varflags & VSNUL)
6317 ash_msg_and_raise_error("%.*s: %s%s", (int)(end - var - 1), var, msg, tail);
6321 subevalvar(char *p, char *varname, int strloc, int subtype,
6322 int startloc, int varflags, int flag, struct strlist *var_str_list)
6324 struct nodelist *saveargbackq = argbackq;
6325 int quotes = flag & QUOTES_ESC;
6328 char *rmesc, *rmescend;
6330 IF_ASH_BASH_COMPAT(char *repl = NULL;)
6331 IF_ASH_BASH_COMPAT(int pos, len, orig_len;)
6332 int saveherefd = herefd;
6333 int amount, resetloc;
6334 IF_ASH_BASH_COMPAT(int workloc;)
6336 char *(*scan)(char*, char*, char*, char*, int, int);
6338 //bb_error_msg("subevalvar(p:'%s',varname:'%s',strloc:%d,subtype:%d,startloc:%d,varflags:%x,quotes:%d)",
6339 // p, varname, strloc, subtype, startloc, varflags, quotes);
6342 argstr(p, EXP_TILDE | (subtype != VSASSIGN && subtype != VSQUESTION ?
6343 (flag & (EXP_QUOTED | EXP_QPAT) ? EXP_QPAT : EXP_CASE) : 0),
6345 STPUTC('\0', expdest);
6346 herefd = saveherefd;
6347 argbackq = saveargbackq;
6348 startp = (char *)stackblock() + startloc;
6352 setvar0(varname, startp);
6353 amount = startp - expdest;
6354 STADJUST(amount, expdest);
6358 varunset(p, varname, startp, varflags);
6361 #if ENABLE_ASH_BASH_COMPAT
6363 //TODO: support more general format ${v:EXPR:EXPR},
6364 // where EXPR follows $(()) rules
6365 loc = str = stackblock() + strloc;
6366 /* Read POS in ${var:POS:LEN} */
6367 pos = atoi(loc); /* number(loc) errors out on "1:4" */
6368 len = str - startp - 1;
6370 /* *loc != '\0', guaranteed by parser */
6374 /* Adjust the length by the number of escapes */
6375 for (ptr = startp; ptr < (str - 1); ptr++) {
6376 if ((unsigned char)*ptr == CTLESC) {
6384 if (*loc++ == ':') {
6388 /* Skip POS in ${var:POS:LEN} */
6390 while (*loc && *loc != ':') {
6392 * bash complains on: var=qwe; echo ${var:1a:123}
6394 ash_msg_and_raise_error(msg_illnum, str);
6398 if (*loc++ == ':') {
6403 /* ${VAR:$((-n)):l} starts n chars from the end */
6404 pos = orig_len + pos;
6406 if ((unsigned)pos >= orig_len) {
6407 /* apart from obvious ${VAR:999999:l},
6408 * covers ${VAR:$((-9999999)):l} - result is ""
6414 if (len > (orig_len - pos))
6415 len = orig_len - pos;
6417 for (str = startp; pos; str++, pos--) {
6418 if (quotes && (unsigned char)*str == CTLESC)
6421 for (loc = startp; len; len--) {
6422 if (quotes && (unsigned char)*str == CTLESC)
6427 amount = loc - expdest;
6428 STADJUST(amount, expdest);
6433 resetloc = expdest - (char *)stackblock();
6435 /* We'll comeback here if we grow the stack while handling
6436 * a VSREPLACE or VSREPLACEALL, since our pointers into the
6437 * stack will need rebasing, and we'll need to remove our work
6440 IF_ASH_BASH_COMPAT(restart:)
6442 amount = expdest - ((char *)stackblock() + resetloc);
6443 STADJUST(-amount, expdest);
6444 startp = (char *)stackblock() + startloc;
6447 rmescend = (char *)stackblock() + strloc;
6449 rmesc = rmescapes(startp, RMESCAPE_ALLOC | RMESCAPE_GROW);
6450 if (rmesc != startp) {
6452 startp = (char *)stackblock() + startloc;
6456 str = (char *)stackblock() + strloc;
6458 * Example: v='a\bc'; echo ${v/\\b/_\\_\z_}
6459 * The result is a_\_z_c (not a\_\_z_c)!
6461 * The search pattern and replace string treat backslashes differently!
6462 * RMESCAPE_SLASH causes preglob to work differently on the pattern
6463 * and string. It's only used on the first call.
6465 preglob(str, IF_ASH_BASH_COMPAT(
6466 (subtype == VSREPLACE || subtype == VSREPLACEALL) && !repl ?
6467 RMESCAPE_SLASH :) 0);
6469 #if ENABLE_ASH_BASH_COMPAT
6470 workloc = expdest - (char *)stackblock();
6471 if (subtype == VSREPLACE || subtype == VSREPLACEALL) {
6475 repl = strchr(str, CTLESC);
6481 //bb_error_msg("str:'%s' repl:'%s'", str, repl);
6483 /* If there's no pattern to match, return the expansion unmolested */
6492 loc = scanright(idx, rmesc, rmescend, str, quotes, 1);
6493 //bb_error_msg("scanright('%s'):'%s'", str, loc);
6495 /* No match, advance */
6496 char *restart_detect = stackblock();
6498 STPUTC(*idx, expdest);
6499 if (quotes && (unsigned char)*idx == CTLESC) {
6502 STPUTC(*idx, expdest);
6504 if (stackblock() != restart_detect)
6509 /* continue; - prone to quadratic behavior, smarter code: */
6512 if (str[0] == '*') {
6513 /* Pattern is "*foo". If "*foo" does not match "long_string",
6514 * it would never match "ong_string" etc, no point in trying.
6521 if (subtype == VSREPLACEALL) {
6523 if (quotes && (unsigned char)*idx == CTLESC)
6532 //bb_error_msg("repl:'%s'", repl);
6533 for (loc = (char*)repl; *loc; loc++) {
6534 char *restart_detect = stackblock();
6535 if (quotes && *loc == '\\') {
6536 STPUTC(CTLESC, expdest);
6539 STPUTC(*loc, expdest);
6540 if (stackblock() != restart_detect)
6545 if (subtype == VSREPLACE) {
6546 //bb_error_msg("tail:'%s', quotes:%x", idx, quotes);
6548 char *restart_detect = stackblock();
6549 STPUTC(*idx, expdest);
6550 if (stackblock() != restart_detect)
6559 /* We've put the replaced text into a buffer at workloc, now
6560 * move it to the right place and adjust the stack.
6562 STPUTC('\0', expdest);
6563 startp = (char *)stackblock() + startloc;
6564 memmove(startp, (char *)stackblock() + workloc, len + 1);
6565 //bb_error_msg("startp:'%s'", startp);
6566 amount = expdest - (startp + len);
6567 STADJUST(-amount, expdest);
6570 #endif /* ENABLE_ASH_BASH_COMPAT */
6572 subtype -= VSTRIMRIGHT;
6574 if (subtype < 0 || subtype > 7)
6577 /* zero = (subtype == VSTRIMLEFT || subtype == VSTRIMLEFTMAX) */
6578 zero = subtype >> 1;
6579 /* VSTRIMLEFT/VSTRIMRIGHTMAX -> scanleft */
6580 scan = (subtype & 1) ^ zero ? scanleft : scanright;
6582 loc = scan(startp, rmesc, rmescend, str, quotes, zero);
6585 memmove(startp, loc, str - loc);
6586 loc = startp + (str - loc) - 1;
6589 amount = loc - expdest;
6590 STADJUST(amount, expdest);
6596 * Add the value of a specialized variable to the stack string.
6597 * name parameter (examples):
6598 * ash -c 'echo $1' name:'1='
6599 * ash -c 'echo $qwe' name:'qwe='
6600 * ash -c 'echo $$' name:'$='
6601 * ash -c 'echo ${$}' name:'$='
6602 * ash -c 'echo ${$##q}' name:'$=q'
6603 * ash -c 'echo ${#$}' name:'$='
6604 * note: examples with bad shell syntax:
6605 * ash -c 'echo ${#$1}' name:'$=1'
6606 * ash -c 'echo ${#1#}' name:'1=#'
6608 static NOINLINE ssize_t
6609 varvalue(char *name, int varflags, int flags, struct strlist *var_str_list, int *quotedp)
6616 int quoted = *quotedp;
6617 int subtype = varflags & VSTYPE;
6618 int discard = subtype == VSPLUS || subtype == VSLENGTH;
6619 int quotes = (discard ? 0 : (flags & QUOTES_ESC)) | QUOTES_KEEPNUL;
6620 int syntax = quoted ? DQSYNTAX : BASESYNTAX;
6630 num = shellparam.nparam;
6638 goto check_1char_name;
6640 expdest = makestrspace(NOPTS, expdest);
6641 for (i = NOPTS - 1; i >= 0; i--) {
6643 USTPUTC(optletters(i), expdest);
6649 /* handles cases similar to ${#$1} */
6650 if (name[2] != '\0')
6651 raise_error_syntax("bad substitution");
6659 if (quoted && (flags & EXP_FULL)) {
6660 /* note: this is not meant as PEOF value */
6661 sep = 1 << CHAR_BIT;
6666 sep = ifsset() ? (unsigned char)(ifsval()[0]) : ' ';
6669 sep |= (flags & EXP_FULL) << CHAR_BIT;
6676 while ((p = *ap++) != NULL) {
6677 len += strtodest(p, syntax, quotes);
6681 memtodest(&sepc, 1, syntax, quotes);
6685 } /* case '@' and '*' */
6696 num = atoi(name); /* number(name) fails on ${N#str} etc */
6697 if (num < 0 || num > shellparam.nparam)
6699 p = num ? shellparam.p[num - 1] : arg0;
6702 /* NB: name has form "VAR=..." */
6704 /* "A=a B=$A" case: var_str_list is a list of "A=a" strings
6705 * which should be considered before we check variables. */
6707 unsigned name_len = (strchrnul(name, '=') - name) + 1;
6711 str = var_str_list->text;
6712 eq = strchr(str, '=');
6713 if (!eq) /* stop at first non-assignment */
6716 if (name_len == (unsigned)(eq - str)
6717 && strncmp(str, name, name_len) == 0
6720 /* goto value; - WRONG! */
6721 /* think "A=1 A=2 B=$A" */
6723 var_str_list = var_str_list->next;
6724 } while (var_str_list);
6728 p = lookupvar(name);
6733 len = strtodest(p, syntax, quotes);
6734 #if ENABLE_UNICODE_SUPPORT
6735 if (subtype == VSLENGTH && len > 0) {
6736 reinit_unicode_for_ash();
6737 if (unicode_status == UNICODE_ON) {
6738 STADJUST(-len, expdest);
6740 len = unicode_strlen(p);
6748 STADJUST(-len, expdest);
6753 * Expand a variable, and return a pointer to the next character in the
6757 evalvar(char *p, int flag, struct strlist *var_str_list)
6768 varflags = (unsigned char) *p++;
6769 subtype = varflags & VSTYPE;
6770 quoted = flag & EXP_QUOTED;
6772 easy = (!quoted || (*var == '@' && shellparam.nparam));
6773 startloc = expdest - (char *)stackblock();
6774 p = strchr(p, '=') + 1; //TODO: use var_end(p)?
6777 varlen = varvalue(var, varflags, flag, var_str_list, "ed);
6778 if (varflags & VSNUL)
6781 if (subtype == VSPLUS) {
6782 varlen = -1 - varlen;
6786 if (subtype == VSMINUS) {
6791 flag | EXP_TILDE | EXP_WORD,
6799 if (subtype == VSASSIGN || subtype == VSQUESTION) {
6803 subevalvar(p, var, 0, subtype, startloc, varflags,
6804 flag & ~QUOTES_ESC, var_str_list);
6807 * Remove any recorded regions beyond
6810 removerecordregions(startloc);
6814 if (varlen < 0 && uflag)
6815 varunset(p, var, 0, 0);
6817 if (subtype == VSLENGTH) {
6818 cvtnum(varlen > 0 ? varlen : 0);
6822 if (subtype == VSNORMAL) {
6826 recordregion(startloc, expdest - (char *)stackblock(), quoted);
6835 case VSTRIMRIGHTMAX:
6836 #if ENABLE_ASH_BASH_COMPAT
6849 * Terminate the string and start recording the pattern
6852 STPUTC('\0', expdest);
6853 patloc = expdest - (char *)stackblock();
6854 if (NULL == subevalvar(p, /* varname: */ NULL, patloc, subtype,
6855 startloc, varflags, flag, var_str_list)) {
6856 int amount = expdest - (
6857 (char *)stackblock() + patloc - 1
6859 STADJUST(-amount, expdest);
6861 /* Remove any recorded regions beyond start of variable */
6862 removerecordregions(startloc);
6867 if (subtype != VSNORMAL) { /* skip to end of alternative */
6870 unsigned char c = *p++;
6873 else if (c == CTLBACKQ) {
6875 argbackq = argbackq->next;
6876 } else if (c == CTLVAR) {
6877 if ((*p++ & VSTYPE) != VSNORMAL)
6879 } else if (c == CTLENDVAR) {
6889 * Break the argument string into pieces based upon IFS and add the
6890 * strings to the argument list. The regions of the string to be
6891 * searched for IFS characters have been stored by recordregion.
6894 ifsbreakup(char *string, struct arglist *arglist)
6896 struct ifsregion *ifsp;
6901 const char *ifs, *realifs;
6906 if (ifslastp != NULL) {
6909 realifs = ifsset() ? ifsval() : defifs;
6912 p = string + ifsp->begoff;
6913 nulonly = ifsp->nulonly;
6914 ifs = nulonly ? nullstr : realifs;
6916 while (p < string + ifsp->endoff) {
6918 if ((unsigned char)*p == CTLESC)
6920 if (!strchr(ifs, *p)) {
6925 ifsspc = (strchr(defifs, *p) != NULL);
6926 /* Ignore IFS whitespace at start */
6927 if (q == start && ifsspc) {
6933 sp = stzalloc(sizeof(*sp));
6935 *arglist->lastp = sp;
6936 arglist->lastp = &sp->next;
6940 if (p >= string + ifsp->endoff) {
6944 if ((unsigned char)*p == CTLESC)
6946 if (strchr(ifs, *p) == NULL) {
6950 if (strchr(defifs, *p) == NULL) {
6965 } while (ifsp != NULL);
6974 sp = stzalloc(sizeof(*sp));
6976 *arglist->lastp = sp;
6977 arglist->lastp = &sp->next;
6983 struct ifsregion *p;
6988 struct ifsregion *ifsp;
6994 ifsfirst.next = NULL;
6999 * Add a file name to the list.
7002 addfname(const char *name)
7006 sp = stzalloc(sizeof(*sp));
7007 sp->text = sstrdup(name);
7009 exparg.lastp = &sp->next;
7012 /* If we want to use glob() from libc... */
7013 #if !ENABLE_ASH_INTERNAL_GLOB
7015 /* Add the result of glob() to the list */
7017 addglob(const glob_t *pglob)
7019 char **p = pglob->gl_pathv;
7026 expandmeta(struct strlist *str /*, int flag*/)
7028 /* TODO - EXP_REDIR */
7038 p = preglob(str->text, RMESCAPE_ALLOC | RMESCAPE_HEAP);
7040 * GLOB_NOMAGIC (GNU): if no *?[ chars in pattern, return it even if no match
7041 * TODO?: GLOB_NOCHECK: if no match, return unchanged pattern (sans \* escapes?)
7043 i = glob(p, GLOB_NOMAGIC, NULL, &pglob);
7048 /* GLOB_MAGCHAR is set if *?[ chars were seen (GNU) */
7049 if (!(pglob.gl_flags & GLOB_MAGCHAR))
7060 *exparg.lastp = str;
7061 rmescapes(str->text, 0);
7062 exparg.lastp = &str->next;
7064 default: /* GLOB_NOSPACE */
7067 ash_msg_and_raise_error(bb_msg_memory_exhausted);
7074 /* ENABLE_ASH_INTERNAL_GLOB: Homegrown globbing code. (dash also has both, uses homegrown one.) */
7077 * Do metacharacter (i.e. *, ?, [...]) expansion.
7080 expmeta(char *expdir, char *enddir, char *name)
7096 for (p = name; esc = 0, *p; p += esc + 1) {
7097 if (*p == '*' || *p == '?')
7099 else if (*p == '[') {
7106 if (*q == '/' || *q == '\0')
7116 if (p[esc] == '/') {
7119 start = p + esc + 1;
7123 if (metaflag == 0) { /* we've reached the end of the file name */
7124 if (enddir != expdir)
7132 if (metaflag == 0 || lstat(expdir, &statb) >= 0)
7143 } while (p < start);
7145 if (enddir == expdir) {
7147 } else if (enddir == expdir + 1 && *expdir == '/') {
7156 if (enddir != expdir)
7158 if (*endname == 0) {
7171 while (!pending_int && (dp = readdir(dirp)) != NULL) {
7172 if (dp->d_name[0] == '.' && !matchdot)
7174 if (pmatch(start, dp->d_name)) {
7176 strcpy(enddir, dp->d_name);
7179 for (p = enddir, cp = dp->d_name; (*p++ = *cp++) != '\0';)
7182 expmeta(expdir, p, endname);
7188 endname[-esc - 1] = esc ? '\\' : '/';
7191 static struct strlist *
7192 msort(struct strlist *list, int len)
7194 struct strlist *p, *q = NULL;
7195 struct strlist **lpp;
7203 for (n = half; --n >= 0;) {
7207 q->next = NULL; /* terminate first half of list */
7208 q = msort(list, half); /* sort first half of list */
7209 p = msort(p, len - half); /* sort second half */
7212 #if ENABLE_LOCALE_SUPPORT
7213 if (strcoll(p->text, q->text) < 0)
7215 if (strcmp(p->text, q->text) < 0)
7239 * Sort the results of file name expansion. It calculates the number of
7240 * strings to sort and then calls msort (short for merge sort) to do the
7243 static struct strlist *
7244 expsort(struct strlist *str)
7250 for (sp = str; sp; sp = sp->next)
7252 return msort(str, len);
7256 expandmeta(struct strlist *str /*, int flag*/)
7258 static const char metachars[] ALIGN1 = {
7261 /* TODO - EXP_REDIR */
7265 struct strlist **savelastp;
7271 if (!strpbrk(str->text, metachars))
7273 savelastp = exparg.lastp;
7276 p = preglob(str->text, RMESCAPE_ALLOC | RMESCAPE_HEAP);
7278 int i = strlen(str->text);
7279 //BUGGY estimation of how long expanded name can be
7280 expdir = ckmalloc(i < 2048 ? 2048 : i+1);
7282 expmeta(expdir, expdir, p);
7287 if (exparg.lastp == savelastp) {
7292 *exparg.lastp = str;
7293 rmescapes(str->text, 0);
7294 exparg.lastp = &str->next;
7296 *exparg.lastp = NULL;
7297 *savelastp = sp = expsort(*savelastp);
7298 while (sp->next != NULL)
7300 exparg.lastp = &sp->next;
7305 #endif /* ENABLE_ASH_INTERNAL_GLOB */
7308 * Perform variable substitution and command substitution on an argument,
7309 * placing the resulting list of arguments in arglist. If EXP_FULL is true,
7310 * perform splitting and file name expansion. When arglist is NULL, perform
7311 * here document expansion.
7314 expandarg(union node *arg, struct arglist *arglist, int flag)
7319 argbackq = arg->narg.backquote;
7320 STARTSTACKSTR(expdest);
7321 ifsfirst.next = NULL;
7323 TRACE(("expandarg: argstr('%s',flags:%x)\n", arg->narg.text, flag));
7324 argstr(arg->narg.text, flag,
7325 /* var_str_list: */ arglist ? arglist->list : NULL);
7326 p = _STPUTC('\0', expdest);
7328 if (arglist == NULL) {
7329 return; /* here document expanded */
7331 p = grabstackstr(p);
7332 TRACE(("expandarg: p:'%s'\n", p));
7333 exparg.lastp = &exparg.list;
7337 if (flag & EXP_FULL) {
7338 ifsbreakup(p, &exparg);
7339 *exparg.lastp = NULL;
7340 exparg.lastp = &exparg.list;
7341 expandmeta(exparg.list /*, flag*/);
7343 if (flag & EXP_REDIR) { /*XXX - for now, just remove escapes */
7345 TRACE(("expandarg: rmescapes:'%s'\n", p));
7347 sp = stzalloc(sizeof(*sp));
7350 exparg.lastp = &sp->next;
7354 *exparg.lastp = NULL;
7356 *arglist->lastp = exparg.list;
7357 arglist->lastp = exparg.lastp;
7362 * Expand shell variables and backquotes inside a here document.
7365 expandhere(union node *arg, int fd)
7368 expandarg(arg, (struct arglist *)NULL, EXP_QUOTED);
7369 full_write(fd, stackblock(), expdest - (char *)stackblock());
7373 * Returns true if the pattern matches the string.
7376 patmatch(char *pattern, const char *string)
7378 return pmatch(preglob(pattern, 0), string);
7382 * See if a pattern matches in a case statement.
7385 casematch(union node *pattern, char *val)
7387 struct stackmark smark;
7390 setstackmark(&smark);
7391 argbackq = pattern->narg.backquote;
7392 STARTSTACKSTR(expdest);
7394 argstr(pattern->narg.text, EXP_TILDE | EXP_CASE,
7395 /* var_str_list: */ NULL);
7396 STACKSTRNUL(expdest);
7397 result = patmatch(stackblock(), val);
7398 popstackmark(&smark);
7403 /* ============ find_command */
7407 int (*builtin)(int, char **) FAST_FUNC;
7408 /* unsigned flags; */
7410 #define IS_BUILTIN_SPECIAL(b) ((b)->name[0] & 1)
7411 /* "regular" builtins always take precedence over commands,
7412 * regardless of PATH=....%builtin... position */
7413 #define IS_BUILTIN_REGULAR(b) ((b)->name[0] & 2)
7414 #define IS_BUILTIN_ASSIGN(b) ((b)->name[0] & 4)
7417 smallint cmdtype; /* CMDxxx */
7420 /* index >= 0 for commands without path (slashes) */
7421 /* (TODO: what exactly does the value mean? PATH position?) */
7422 /* index == -1 for commands with slashes */
7423 /* index == (-2 - applet_no) for NOFORK applets */
7424 const struct builtincmd *cmd;
7425 struct funcnode *func;
7428 /* values of cmdtype */
7429 #define CMDUNKNOWN -1 /* no entry in table for command */
7430 #define CMDNORMAL 0 /* command is an executable program */
7431 #define CMDFUNCTION 1 /* command is a shell function */
7432 #define CMDBUILTIN 2 /* command is a shell builtin */
7434 /* action to find_command() */
7435 #define DO_ERR 0x01 /* prints errors */
7436 #define DO_ABS 0x02 /* checks absolute paths */
7437 #define DO_NOFUNC 0x04 /* don't return shell functions, for command */
7438 #define DO_ALTPATH 0x08 /* using alternate path */
7439 #define DO_ALTBLTIN 0x20 /* %builtin in alt. path */
7441 static void find_command(char *, struct cmdentry *, int, const char *);
7444 /* ============ Hashing commands */
7447 * When commands are first encountered, they are entered in a hash table.
7448 * This ensures that a full path search will not have to be done for them
7449 * on each invocation.
7451 * We should investigate converting to a linear search, even though that
7452 * would make the command name "hash" a misnomer.
7456 struct tblentry *next; /* next entry in hash chain */
7457 union param param; /* definition of builtin function */
7458 smallint cmdtype; /* CMDxxx */
7459 char rehash; /* if set, cd done since entry created */
7460 char cmdname[1]; /* name of command */
7463 static struct tblentry **cmdtable;
7464 #define INIT_G_cmdtable() do { \
7465 cmdtable = xzalloc(CMDTABLESIZE * sizeof(cmdtable[0])); \
7468 static int builtinloc = -1; /* index in path of %builtin, or -1 */
7472 tryexec(IF_FEATURE_SH_STANDALONE(int applet_no,) char *cmd, char **argv, char **envp)
7474 #if ENABLE_FEATURE_SH_STANDALONE
7475 if (applet_no >= 0) {
7476 if (APPLET_IS_NOEXEC(applet_no)) {
7480 run_applet_no_and_exit(applet_no, argv);
7482 /* re-exec ourselves with the new arguments */
7483 execve(bb_busybox_exec_path, argv, envp);
7484 /* If they called chroot or otherwise made the binary no longer
7485 * executable, fall through */
7492 execve(cmd, argv, envp);
7493 } while (errno == EINTR);
7495 execve(cmd, argv, envp);
7497 if (cmd == (char*) bb_busybox_exec_path) {
7498 /* We already visited ENOEXEC branch below, don't do it again */
7499 //TODO: try execve(initial_argv0_of_shell, argv, envp) before giving up?
7503 if (errno == ENOEXEC) {
7504 /* Run "cmd" as a shell script:
7505 * http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html
7506 * "If the execve() function fails with ENOEXEC, the shell
7507 * shall execute a command equivalent to having a shell invoked
7508 * with the command name as its first operand,
7509 * with any remaining arguments passed to the new shell"
7511 * That is, do not use $SHELL, user's shell, or /bin/sh;
7512 * just call ourselves.
7514 * Note that bash reads ~80 chars of the file, and if it sees
7515 * a zero byte before it sees newline, it doesn't try to
7516 * interpret it, but fails with "cannot execute binary file"
7517 * message and exit code 126. For one, this prevents attempts
7518 * to interpret foreign ELF binaries as shell scripts.
7523 for (ap = argv; *ap; ap++)
7525 new = ckmalloc((ap - argv + 2) * sizeof(new[0]));
7526 new[0] = (char*) "ash";
7529 while ((*ap++ = *++argv) != NULL)
7531 cmd = (char*) bb_busybox_exec_path;
7538 * Exec a program. Never returns. If you change this routine, you may
7539 * have to change the find_command routine as well.
7541 static void shellexec(char **, const char *, int) NORETURN;
7543 shellexec(char **argv, const char *path, int idx)
7549 int applet_no = -1; /* used only by FEATURE_SH_STANDALONE */
7551 clearredir(/*drop:*/ 1);
7552 envp = listvars(VEXPORT, VUNSET, /*end:*/ NULL);
7553 if (strchr(argv[0], '/') != NULL
7554 #if ENABLE_FEATURE_SH_STANDALONE
7555 || (applet_no = find_applet_by_name(argv[0])) >= 0
7558 tryexec(IF_FEATURE_SH_STANDALONE(applet_no,) argv[0], argv, envp);
7559 if (applet_no >= 0) {
7560 /* We tried execing ourself, but it didn't work.
7561 * Maybe /proc/self/exe doesn't exist?
7570 while ((cmdname = path_advance(&path, argv[0])) != NULL) {
7571 if (--idx < 0 && pathopt == NULL) {
7572 tryexec(IF_FEATURE_SH_STANDALONE(-1,) cmdname, argv, envp);
7573 if (errno != ENOENT && errno != ENOTDIR)
7580 /* Map to POSIX errors */
7592 exitstatus = exerrno;
7593 TRACE(("shellexec failed for %s, errno %d, suppress_int %d\n",
7594 argv[0], e, suppress_int));
7595 ash_msg_and_raise(EXEXEC, "%s: %s", argv[0], errmsg(e, "not found"));
7600 printentry(struct tblentry *cmdp)
7606 idx = cmdp->param.index;
7609 name = path_advance(&path, cmdp->cmdname);
7611 } while (--idx >= 0);
7612 out1fmt("%s%s\n", name, (cmdp->rehash ? "*" : nullstr));
7616 * Clear out command entries. The argument specifies the first entry in
7617 * PATH which has changed.
7620 clearcmdentry(int firstchange)
7622 struct tblentry **tblp;
7623 struct tblentry **pp;
7624 struct tblentry *cmdp;
7627 for (tblp = cmdtable; tblp < &cmdtable[CMDTABLESIZE]; tblp++) {
7629 while ((cmdp = *pp) != NULL) {
7630 if ((cmdp->cmdtype == CMDNORMAL &&
7631 cmdp->param.index >= firstchange)
7632 || (cmdp->cmdtype == CMDBUILTIN &&
7633 builtinloc >= firstchange)
7646 * Locate a command in the command hash table. If "add" is nonzero,
7647 * add the command to the table if it is not already present. The
7648 * variable "lastcmdentry" is set to point to the address of the link
7649 * pointing to the entry, so that delete_cmd_entry can delete the
7652 * Interrupts must be off if called with add != 0.
7654 static struct tblentry **lastcmdentry;
7656 static struct tblentry *
7657 cmdlookup(const char *name, int add)
7659 unsigned int hashval;
7661 struct tblentry *cmdp;
7662 struct tblentry **pp;
7665 hashval = (unsigned char)*p << 4;
7667 hashval += (unsigned char)*p++;
7669 pp = &cmdtable[hashval % CMDTABLESIZE];
7670 for (cmdp = *pp; cmdp; cmdp = cmdp->next) {
7671 if (strcmp(cmdp->cmdname, name) == 0)
7675 if (add && cmdp == NULL) {
7676 cmdp = *pp = ckzalloc(sizeof(struct tblentry)
7678 /* + 1 - already done because
7679 * tblentry::cmdname is char[1] */);
7680 /*cmdp->next = NULL; - ckzalloc did it */
7681 cmdp->cmdtype = CMDUNKNOWN;
7682 strcpy(cmdp->cmdname, name);
7689 * Delete the command entry returned on the last lookup.
7692 delete_cmd_entry(void)
7694 struct tblentry *cmdp;
7697 cmdp = *lastcmdentry;
7698 *lastcmdentry = cmdp->next;
7699 if (cmdp->cmdtype == CMDFUNCTION)
7700 freefunc(cmdp->param.func);
7706 * Add a new command entry, replacing any existing command entry for
7707 * the same name - except special builtins.
7710 addcmdentry(char *name, struct cmdentry *entry)
7712 struct tblentry *cmdp;
7714 cmdp = cmdlookup(name, 1);
7715 if (cmdp->cmdtype == CMDFUNCTION) {
7716 freefunc(cmdp->param.func);
7718 cmdp->cmdtype = entry->cmdtype;
7719 cmdp->param = entry->u;
7723 static int FAST_FUNC
7724 hashcmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
7726 struct tblentry **pp;
7727 struct tblentry *cmdp;
7729 struct cmdentry entry;
7732 if (nextopt("r") != '\0') {
7737 if (*argptr == NULL) {
7738 for (pp = cmdtable; pp < &cmdtable[CMDTABLESIZE]; pp++) {
7739 for (cmdp = *pp; cmdp; cmdp = cmdp->next) {
7740 if (cmdp->cmdtype == CMDNORMAL)
7748 while ((name = *argptr) != NULL) {
7749 cmdp = cmdlookup(name, 0);
7751 && (cmdp->cmdtype == CMDNORMAL
7752 || (cmdp->cmdtype == CMDBUILTIN && builtinloc >= 0))
7756 find_command(name, &entry, DO_ERR, pathval());
7757 if (entry.cmdtype == CMDUNKNOWN)
7765 * Called when a cd is done. Marks all commands so the next time they
7766 * are executed they will be rehashed.
7771 struct tblentry **pp;
7772 struct tblentry *cmdp;
7774 for (pp = cmdtable; pp < &cmdtable[CMDTABLESIZE]; pp++) {
7775 for (cmdp = *pp; cmdp; cmdp = cmdp->next) {
7776 if (cmdp->cmdtype == CMDNORMAL
7777 || (cmdp->cmdtype == CMDBUILTIN
7778 && !IS_BUILTIN_REGULAR(cmdp->param.cmd)
7788 * Fix command hash table when PATH changed.
7789 * Called before PATH is changed. The argument is the new value of PATH;
7790 * pathval() still returns the old value at this point.
7791 * Called with interrupts off.
7793 static void FAST_FUNC
7794 changepath(const char *new)
7802 firstchange = 9999; /* assume no change */
7808 if ((*old == '\0' && *new == ':')
7809 || (*old == ':' && *new == '\0')
7813 old = new; /* ignore subsequent differences */
7817 if (*new == '%' && idx_bltin < 0 && prefix(new + 1, "builtin"))
7824 if (builtinloc < 0 && idx_bltin >= 0)
7825 builtinloc = idx_bltin; /* zap builtins */
7826 if (builtinloc >= 0 && idx_bltin < 0)
7828 clearcmdentry(firstchange);
7829 builtinloc = idx_bltin;
7854 #if ENABLE_ASH_BASH_COMPAT
7865 typedef smallint token_id_t;
7867 /* first char is indicating which tokens mark the end of a list */
7868 static const char *const tokname_array[] = {
7882 #define KWDOFFSET 13
7883 /* the following are keywords */
7893 #if ENABLE_ASH_BASH_COMPAT
7905 /* Wrapper around strcmp for qsort/bsearch/... */
7907 pstrcmp(const void *a, const void *b)
7909 return strcmp((char*) a, (*(char**) b) + 1);
7912 static const char *const *
7913 findkwd(const char *s)
7915 return bsearch(s, tokname_array + KWDOFFSET,
7916 ARRAY_SIZE(tokname_array) - KWDOFFSET,
7917 sizeof(tokname_array[0]), pstrcmp);
7921 * Locate and print what a word is...
7924 describe_command(char *command, const char *path, int describe_command_verbose)
7926 struct cmdentry entry;
7927 struct tblentry *cmdp;
7928 #if ENABLE_ASH_ALIAS
7929 const struct alias *ap;
7932 path = path ? path : pathval();
7934 if (describe_command_verbose) {
7938 /* First look at the keywords */
7939 if (findkwd(command)) {
7940 out1str(describe_command_verbose ? " is a shell keyword" : command);
7944 #if ENABLE_ASH_ALIAS
7945 /* Then look at the aliases */
7946 ap = lookupalias(command, 0);
7948 if (!describe_command_verbose) {
7953 out1fmt(" is an alias for %s", ap->val);
7957 /* Then check if it is a tracked alias */
7958 cmdp = cmdlookup(command, 0);
7960 entry.cmdtype = cmdp->cmdtype;
7961 entry.u = cmdp->param;
7963 /* Finally use brute force */
7964 find_command(command, &entry, DO_ABS, path);
7967 switch (entry.cmdtype) {
7969 int j = entry.u.index;
7975 p = path_advance(&path, command);
7979 if (describe_command_verbose) {
7981 (cmdp ? " a tracked alias for" : nullstr), p
7990 if (describe_command_verbose) {
7991 out1str(" is a shell function");
7998 if (describe_command_verbose) {
7999 out1fmt(" is a %sshell builtin",
8000 IS_BUILTIN_SPECIAL(entry.u.cmd) ?
8001 "special " : nullstr
8009 if (describe_command_verbose) {
8010 out1str(": not found\n");
8019 static int FAST_FUNC
8020 typecmd(int argc UNUSED_PARAM, char **argv)
8026 /* type -p ... ? (we don't bother checking for 'p') */
8027 if (argv[1] && argv[1][0] == '-') {
8032 err |= describe_command(argv[i++], NULL, verbose);
8037 #if ENABLE_ASH_CMDCMD
8038 /* Is it "command [-p] PROG ARGS" bltin, no other opts? Return ptr to "PROG" if yes */
8040 parse_command_args(char **argv, const char **path)
8053 if (c == '-' && !*cp) {
8061 *path = bb_default_path;
8064 /* run 'typecmd' for other options */
8073 static int FAST_FUNC
8074 commandcmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
8082 const char *path = NULL;
8084 /* "command [-p] PROG ARGS" (that is, without -V or -v)
8085 * never reaches this function.
8088 while ((c = nextopt("pvV")) != '\0')
8090 verify |= VERIFY_VERBOSE;
8092 /*verify |= VERIFY_BRIEF*/;
8098 path = bb_default_path;
8100 /* Mimic bash: just "command -v" doesn't complain, it's a nop */
8102 if (/*verify && */ cmd)
8103 return describe_command(cmd, path, verify /* - VERIFY_BRIEF*/);
8110 /* ============ eval.c */
8112 static int funcblocksize; /* size of structures in function */
8113 static int funcstringsize; /* size of strings in node */
8114 static void *funcblock; /* block to allocate function from */
8115 static char *funcstring; /* block to allocate strings from */
8117 /* flags in argument to evaltree */
8118 #define EV_EXIT 01 /* exit after evaluating tree */
8119 #define EV_TESTED 02 /* exit status is checked; ignore -e flag */
8121 static const uint8_t nodesize[N_NUMBER] ALIGN1 = {
8122 [NCMD ] = SHELL_ALIGN(sizeof(struct ncmd)),
8123 [NPIPE ] = SHELL_ALIGN(sizeof(struct npipe)),
8124 [NREDIR ] = SHELL_ALIGN(sizeof(struct nredir)),
8125 [NBACKGND ] = SHELL_ALIGN(sizeof(struct nredir)),
8126 [NSUBSHELL] = SHELL_ALIGN(sizeof(struct nredir)),
8127 [NAND ] = SHELL_ALIGN(sizeof(struct nbinary)),
8128 [NOR ] = SHELL_ALIGN(sizeof(struct nbinary)),
8129 [NSEMI ] = SHELL_ALIGN(sizeof(struct nbinary)),
8130 [NIF ] = SHELL_ALIGN(sizeof(struct nif)),
8131 [NWHILE ] = SHELL_ALIGN(sizeof(struct nbinary)),
8132 [NUNTIL ] = SHELL_ALIGN(sizeof(struct nbinary)),
8133 [NFOR ] = SHELL_ALIGN(sizeof(struct nfor)),
8134 [NCASE ] = SHELL_ALIGN(sizeof(struct ncase)),
8135 [NCLIST ] = SHELL_ALIGN(sizeof(struct nclist)),
8136 [NDEFUN ] = SHELL_ALIGN(sizeof(struct narg)),
8137 [NARG ] = SHELL_ALIGN(sizeof(struct narg)),
8138 [NTO ] = SHELL_ALIGN(sizeof(struct nfile)),
8139 #if ENABLE_ASH_BASH_COMPAT
8140 [NTO2 ] = SHELL_ALIGN(sizeof(struct nfile)),
8142 [NCLOBBER ] = SHELL_ALIGN(sizeof(struct nfile)),
8143 [NFROM ] = SHELL_ALIGN(sizeof(struct nfile)),
8144 [NFROMTO ] = SHELL_ALIGN(sizeof(struct nfile)),
8145 [NAPPEND ] = SHELL_ALIGN(sizeof(struct nfile)),
8146 [NTOFD ] = SHELL_ALIGN(sizeof(struct ndup)),
8147 [NFROMFD ] = SHELL_ALIGN(sizeof(struct ndup)),
8148 [NHERE ] = SHELL_ALIGN(sizeof(struct nhere)),
8149 [NXHERE ] = SHELL_ALIGN(sizeof(struct nhere)),
8150 [NNOT ] = SHELL_ALIGN(sizeof(struct nnot)),
8153 static void calcsize(union node *n);
8156 sizenodelist(struct nodelist *lp)
8159 funcblocksize += SHELL_ALIGN(sizeof(struct nodelist));
8166 calcsize(union node *n)
8170 funcblocksize += nodesize[n->type];
8173 calcsize(n->ncmd.redirect);
8174 calcsize(n->ncmd.args);
8175 calcsize(n->ncmd.assign);
8178 sizenodelist(n->npipe.cmdlist);
8183 calcsize(n->nredir.redirect);
8184 calcsize(n->nredir.n);
8191 calcsize(n->nbinary.ch2);
8192 calcsize(n->nbinary.ch1);
8195 calcsize(n->nif.elsepart);
8196 calcsize(n->nif.ifpart);
8197 calcsize(n->nif.test);
8200 funcstringsize += strlen(n->nfor.var) + 1;
8201 calcsize(n->nfor.body);
8202 calcsize(n->nfor.args);
8205 calcsize(n->ncase.cases);
8206 calcsize(n->ncase.expr);
8209 calcsize(n->nclist.body);
8210 calcsize(n->nclist.pattern);
8211 calcsize(n->nclist.next);
8215 sizenodelist(n->narg.backquote);
8216 funcstringsize += strlen(n->narg.text) + 1;
8217 calcsize(n->narg.next);
8220 #if ENABLE_ASH_BASH_COMPAT
8227 calcsize(n->nfile.fname);
8228 calcsize(n->nfile.next);
8232 calcsize(n->ndup.vname);
8233 calcsize(n->ndup.next);
8237 calcsize(n->nhere.doc);
8238 calcsize(n->nhere.next);
8241 calcsize(n->nnot.com);
8247 nodeckstrdup(char *s)
8249 char *rtn = funcstring;
8251 strcpy(funcstring, s);
8252 funcstring += strlen(s) + 1;
8256 static union node *copynode(union node *);
8258 static struct nodelist *
8259 copynodelist(struct nodelist *lp)
8261 struct nodelist *start;
8262 struct nodelist **lpp;
8267 funcblock = (char *) funcblock + SHELL_ALIGN(sizeof(struct nodelist));
8268 (*lpp)->n = copynode(lp->n);
8270 lpp = &(*lpp)->next;
8277 copynode(union node *n)
8284 funcblock = (char *) funcblock + nodesize[n->type];
8288 new->ncmd.redirect = copynode(n->ncmd.redirect);
8289 new->ncmd.args = copynode(n->ncmd.args);
8290 new->ncmd.assign = copynode(n->ncmd.assign);
8293 new->npipe.cmdlist = copynodelist(n->npipe.cmdlist);
8294 new->npipe.pipe_backgnd = n->npipe.pipe_backgnd;
8299 new->nredir.redirect = copynode(n->nredir.redirect);
8300 new->nredir.n = copynode(n->nredir.n);
8307 new->nbinary.ch2 = copynode(n->nbinary.ch2);
8308 new->nbinary.ch1 = copynode(n->nbinary.ch1);
8311 new->nif.elsepart = copynode(n->nif.elsepart);
8312 new->nif.ifpart = copynode(n->nif.ifpart);
8313 new->nif.test = copynode(n->nif.test);
8316 new->nfor.var = nodeckstrdup(n->nfor.var);
8317 new->nfor.body = copynode(n->nfor.body);
8318 new->nfor.args = copynode(n->nfor.args);
8321 new->ncase.cases = copynode(n->ncase.cases);
8322 new->ncase.expr = copynode(n->ncase.expr);
8325 new->nclist.body = copynode(n->nclist.body);
8326 new->nclist.pattern = copynode(n->nclist.pattern);
8327 new->nclist.next = copynode(n->nclist.next);
8331 new->narg.backquote = copynodelist(n->narg.backquote);
8332 new->narg.text = nodeckstrdup(n->narg.text);
8333 new->narg.next = copynode(n->narg.next);
8336 #if ENABLE_ASH_BASH_COMPAT
8343 new->nfile.fname = copynode(n->nfile.fname);
8344 new->nfile.fd = n->nfile.fd;
8345 new->nfile.next = copynode(n->nfile.next);
8349 new->ndup.vname = copynode(n->ndup.vname);
8350 new->ndup.dupfd = n->ndup.dupfd;
8351 new->ndup.fd = n->ndup.fd;
8352 new->ndup.next = copynode(n->ndup.next);
8356 new->nhere.doc = copynode(n->nhere.doc);
8357 new->nhere.fd = n->nhere.fd;
8358 new->nhere.next = copynode(n->nhere.next);
8361 new->nnot.com = copynode(n->nnot.com);
8364 new->type = n->type;
8369 * Make a copy of a parse tree.
8371 static struct funcnode *
8372 copyfunc(union node *n)
8377 funcblocksize = offsetof(struct funcnode, n);
8380 blocksize = funcblocksize;
8381 f = ckmalloc(blocksize + funcstringsize);
8382 funcblock = (char *) f + offsetof(struct funcnode, n);
8383 funcstring = (char *) f + blocksize;
8390 * Define a shell function.
8393 defun(char *name, union node *func)
8395 struct cmdentry entry;
8398 entry.cmdtype = CMDFUNCTION;
8399 entry.u.func = copyfunc(func);
8400 addcmdentry(name, &entry);
8404 /* Reasons for skipping commands (see comment on breakcmd routine) */
8405 #define SKIPBREAK (1 << 0)
8406 #define SKIPCONT (1 << 1)
8407 #define SKIPFUNC (1 << 2)
8408 static smallint evalskip; /* set to SKIPxxx if we are skipping commands */
8409 static int skipcount; /* number of levels to skip */
8410 static int funcnest; /* depth of function calls */
8411 static int loopnest; /* current loop nesting level */
8413 /* Forward decl way out to parsing code - dotrap needs it */
8414 static int evalstring(char *s, int flags);
8416 /* Called to execute a trap.
8417 * Single callsite - at the end of evaltree().
8418 * If we return non-zero, evaltree raises EXEXIT exception.
8420 * Perhaps we should avoid entering new trap handlers
8421 * while we are executing a trap handler. [is it a TODO?]
8428 uint8_t last_status;
8433 last_status = exitstatus;
8437 TRACE(("dotrap entered\n"));
8438 for (sig = 1, g = gotsig; sig < NSIG; sig++, g++) {
8450 /* non-trapped SIGINT is handled separately by raise_interrupt,
8451 * don't upset it by resetting gotsig[SIGINT-1] */
8452 if (sig == SIGINT && !p)
8455 TRACE(("sig %d is active, will run handler '%s'\n", sig, p));
8461 exitstatus = last_status;
8462 TRACE(("dotrap returns\n"));
8465 /* forward declarations - evaluation is fairly recursive business... */
8466 static int evalloop(union node *, int);
8467 static int evalfor(union node *, int);
8468 static int evalcase(union node *, int);
8469 static int evalsubshell(union node *, int);
8470 static void expredir(union node *);
8471 static int evalpipe(union node *, int);
8472 static int evalcommand(union node *, int);
8473 static int evalbltin(const struct builtincmd *, int, char **, int);
8474 static void prehash(union node *);
8477 * Evaluate a parse tree. The value is left in the global variable
8481 evaltree(union node *n, int flags)
8483 struct jmploc *volatile savehandler = exception_handler;
8484 struct jmploc jmploc;
8486 int (*evalfn)(union node *, int);
8490 SAVE_INT(int_level);
8493 TRACE(("evaltree(NULL) called\n"));
8496 TRACE(("evaltree(%p: %d, %d) called\n", n, n->type, flags));
8500 exception_handler = &jmploc;
8502 int err = setjmp(jmploc.loc);
8504 /* if it was a signal, check for trap handlers */
8505 if (exception_type == EXSIG) {
8506 TRACE(("exception %d (EXSIG) in evaltree, err=%d\n",
8507 exception_type, err));
8510 /* continue on the way out */
8511 TRACE(("exception %d in evaltree, propagating err=%d\n",
8512 exception_type, err));
8513 exception_handler = savehandler;
8514 longjmp(exception_handler->loc, err);
8521 out1fmt("Node type = %d\n", n->type);
8526 status = !evaltree(n->nnot.com, EV_TESTED);
8529 expredir(n->nredir.redirect);
8530 status = redirectsafe(n->nredir.redirect, REDIR_PUSH);
8532 status = evaltree(n->nredir.n, flags & EV_TESTED);
8534 popredir(/*drop:*/ 0, /*restore:*/ 0 /* not sure */);
8537 evalfn = evalcommand;
8539 if (eflag && !(flags & EV_TESTED))
8550 evalfn = evalsubshell;
8553 evalfn = evalsubshell;
8566 #error NAND + 1 != NOR
8568 #if NOR + 1 != NSEMI
8569 #error NOR + 1 != NSEMI
8571 unsigned is_or = n->type - NAND;
8574 (flags | ((is_or >> 1) - 1)) & EV_TESTED
8576 if (!status == is_or || evalskip)
8582 status = evalfn(n, flags);
8586 status = evaltree(n->nif.test, EV_TESTED);
8593 if (n->nif.elsepart) {
8594 n = n->nif.elsepart;
8600 defun(n->narg.text, n->narg.next);
8601 /* Not necessary. To test it:
8602 * "false; f() { qwerty; }; echo $?" should print 0.
8606 exitstatus = status;
8611 exception_handler = savehandler;
8614 /* Order of checks below is important:
8615 * signal handlers trigger before exit caused by "set -e".
8619 if (checkexit & status)
8620 raise_exception(EXEXIT);
8621 if (flags & EV_EXIT)
8622 raise_exception(EXEXIT);
8624 RESTORE_INT(int_level);
8625 TRACE(("leaving evaltree (no interrupts)\n"));
8630 #if !defined(__alpha__) || (defined(__GNUC__) && __GNUC__ >= 3)
8633 int evaltreenr(union node *, int) __attribute__ ((alias("evaltree"),__noreturn__));
8635 static int skiploop(void)
8637 int skip = evalskip;
8644 if (--skipcount <= 0) {
8655 evalloop(union node *n, int flags)
8666 i = evaltree(n->nbinary.ch1, EV_TESTED);
8668 if (skip == SKIPFUNC)
8672 if (n->type != NWHILE)
8676 status = evaltree(n->nbinary.ch2, flags);
8678 } while (!(skip & ~SKIPCONT));
8685 evalfor(union node *n, int flags)
8687 struct arglist arglist;
8690 struct stackmark smark;
8693 setstackmark(&smark);
8694 arglist.list = NULL;
8695 arglist.lastp = &arglist.list;
8696 for (argp = n->nfor.args; argp; argp = argp->narg.next) {
8697 expandarg(argp, &arglist, EXP_FULL | EXP_TILDE);
8699 *arglist.lastp = NULL;
8703 for (sp = arglist.list; sp; sp = sp->next) {
8704 setvar0(n->nfor.var, sp->text);
8705 status = evaltree(n->nfor.body, flags);
8706 if (skiploop() & ~SKIPCONT)
8710 popstackmark(&smark);
8716 evalcase(union node *n, int flags)
8720 struct arglist arglist;
8721 struct stackmark smark;
8724 setstackmark(&smark);
8725 arglist.list = NULL;
8726 arglist.lastp = &arglist.list;
8727 expandarg(n->ncase.expr, &arglist, EXP_TILDE);
8728 for (cp = n->ncase.cases; cp && evalskip == 0; cp = cp->nclist.next) {
8729 for (patp = cp->nclist.pattern; patp; patp = patp->narg.next) {
8730 if (casematch(patp, arglist.list->text)) {
8731 /* Ensure body is non-empty as otherwise
8732 * EV_EXIT may prevent us from setting the
8735 if (evalskip == 0 && cp->nclist.body) {
8736 status = evaltree(cp->nclist.body, flags);
8743 popstackmark(&smark);
8749 * Kick off a subshell to evaluate a tree.
8752 evalsubshell(union node *n, int flags)
8755 int backgnd = (n->type == NBACKGND);
8758 expredir(n->nredir.redirect);
8759 if (!backgnd && (flags & EV_EXIT) && !may_have_traps)
8762 jp = makejob(/*n,*/ 1);
8763 if (forkshell(jp, n, backgnd) == 0) {
8768 flags &= ~EV_TESTED;
8770 redirect(n->nredir.redirect, 0);
8771 evaltreenr(n->nredir.n, flags);
8776 status = waitforjob(jp);
8782 * Compute the names of the files in a redirection list.
8784 static void fixredir(union node *, const char *, int);
8786 expredir(union node *n)
8790 for (redir = n; redir; redir = redir->nfile.next) {
8794 fn.lastp = &fn.list;
8795 switch (redir->type) {
8799 #if ENABLE_ASH_BASH_COMPAT
8804 expandarg(redir->nfile.fname, &fn, EXP_TILDE | EXP_REDIR);
8805 TRACE(("expredir expanded to '%s'\n", fn.list->text));
8806 #if ENABLE_ASH_BASH_COMPAT
8810 // By the design of stack allocator, the loop of this kind:
8811 // while true; do while true; do break; done </dev/null; done
8812 // will look like a memory leak: ash plans to free expfname's
8813 // of "/dev/null" as soon as it finishes running the loop
8814 // (in this case, never).
8815 // This "fix" is wrong:
8816 if (redir->nfile.expfname)
8817 stunalloc(redir->nfile.expfname);
8818 // It results in corrupted state of stacked allocations.
8820 redir->nfile.expfname = fn.list->text;
8823 case NTOFD: /* >& */
8824 if (redir->ndup.vname) {
8825 expandarg(redir->ndup.vname, &fn, EXP_FULL | EXP_TILDE);
8826 if (fn.list == NULL)
8827 ash_msg_and_raise_error("redir error");
8828 #if ENABLE_ASH_BASH_COMPAT
8829 //FIXME: we used expandarg with different args!
8830 if (!isdigit_str9(fn.list->text)) {
8831 /* >&file, not >&fd */
8832 if (redir->nfile.fd != 1) /* 123>&file - BAD */
8833 ash_msg_and_raise_error("redir error");
8835 goto store_expfname;
8838 fixredir(redir, fn.list->text, 1);
8846 * Evaluate a pipeline. All the processes in the pipeline are children
8847 * of the process creating the pipeline. (This differs from some versions
8848 * of the shell, which make the last process in a pipeline the parent
8852 evalpipe(union node *n, int flags)
8855 struct nodelist *lp;
8861 TRACE(("evalpipe(0x%lx) called\n", (long)n));
8863 for (lp = n->npipe.cmdlist; lp; lp = lp->next)
8867 jp = makejob(/*n,*/ pipelen);
8869 for (lp = n->npipe.cmdlist; lp; lp = lp->next) {
8873 if (pipe(pip) < 0) {
8875 ash_msg_and_raise_error("pipe call failed");
8878 if (forkshell(jp, lp->n, n->npipe.pipe_backgnd) == 0) {
8891 evaltreenr(lp->n, flags);
8897 /* Don't want to trigger debugging */
8901 if (n->npipe.pipe_backgnd == 0) {
8902 status = waitforjob(jp);
8903 TRACE(("evalpipe: job done exit status %d\n", status));
8911 * Controls whether the shell is interactive or not.
8914 setinteractive(int on)
8916 static smallint is_interactive;
8918 if (++on == is_interactive)
8920 is_interactive = on;
8924 #if !ENABLE_FEATURE_SH_EXTRA_QUIET
8925 if (is_interactive > 1) {
8926 /* Looks like they want an interactive shell */
8927 static smallint did_banner;
8930 /* note: ash and hush share this string */
8931 out1fmt("\n\n%s %s\n"
8932 IF_ASH_HELP("Enter 'help' for a list of built-in commands.\n")
8935 "built-in shell (ash)"
8949 setinteractive(iflag);
8951 #if ENABLE_FEATURE_EDITING_VI
8953 line_input_state->flags |= VI_MODE;
8955 line_input_state->flags &= ~VI_MODE;
8957 viflag = 0; /* forcibly keep the option off */
8961 static struct localvar *localvars;
8964 * Called after a function returns.
8965 * Interrupts must be off.
8970 struct localvar *lvp;
8973 while ((lvp = localvars) != NULL) {
8974 localvars = lvp->next;
8976 TRACE(("poplocalvar %s\n", vp ? vp->var_text : "-"));
8977 if (vp == NULL) { /* $- saved */
8978 memcpy(optlist, lvp->text, sizeof(optlist));
8979 free((char*)lvp->text);
8981 } else if ((lvp->flags & (VUNSET|VSTRFIXED)) == VUNSET) {
8982 unsetvar(vp->var_text);
8985 vp->var_func(var_end(lvp->text));
8986 if ((vp->flags & (VTEXTFIXED|VSTACK)) == 0)
8987 free((char*)vp->var_text);
8988 vp->flags = lvp->flags;
8989 vp->var_text = lvp->text;
8996 evalfun(struct funcnode *func, int argc, char **argv, int flags)
8998 volatile struct shparam saveparam;
8999 struct localvar *volatile savelocalvars;
9000 struct jmploc *volatile savehandler;
9001 struct jmploc jmploc;
9004 saveparam = shellparam;
9005 savelocalvars = localvars;
9006 savehandler = exception_handler;
9007 e = setjmp(jmploc.loc);
9012 exception_handler = &jmploc;
9014 shellparam.malloced = 0;
9018 shellparam.nparam = argc - 1;
9019 shellparam.p = argv + 1;
9020 #if ENABLE_ASH_GETOPTS
9021 shellparam.optind = 1;
9022 shellparam.optoff = -1;
9024 evaltree(&func->n, flags & EV_TESTED);
9030 localvars = savelocalvars;
9031 freeparam(&shellparam);
9032 shellparam = saveparam;
9033 exception_handler = savehandler;
9035 evalskip &= ~SKIPFUNC;
9040 * Make a variable a local variable. When a variable is made local, it's
9041 * value and flags are saved in a localvar structure. The saved values
9042 * will be restored when the shell function returns. We handle the name
9043 * "-" as a special case: it makes changes to "set +-options" local
9044 * (options will be restored on return from the function).
9049 struct localvar *lvp;
9052 char *eq = strchr(name, '=');
9055 /* Cater for duplicate "local". Examples:
9056 * x=0; f() { local x=1; echo $x; local x; echo $x; }; f; echo $x
9057 * x=0; f() { local x=1; echo $x; local x=2; echo $x; }; f; echo $x
9061 if (lvp->vp && varcmp(lvp->vp->var_text, name) == 0) {
9065 * it's a duplicate "local VAR" declaration, do nothing
9072 lvp = ckzalloc(sizeof(*lvp));
9073 if (LONE_DASH(name)) {
9075 p = ckmalloc(sizeof(optlist));
9076 lvp->text = memcpy(p, optlist, sizeof(optlist));
9079 vpp = hashvar(name);
9080 vp = *findvar(vpp, name);
9082 /* variable did not exist yet */
9084 setvareq(name, VSTRFIXED);
9086 setvar(name, NULL, VSTRFIXED);
9087 vp = *vpp; /* the new variable */
9088 lvp->flags = VUNSET;
9090 lvp->text = vp->var_text;
9091 lvp->flags = vp->flags;
9092 /* make sure neither "struct var" nor string gets freed
9093 * during (un)setting:
9095 vp->flags |= VSTRFIXED|VTEXTFIXED;
9099 /* "local VAR" unsets VAR: */
9100 setvar0(name, NULL);
9104 lvp->next = localvars;
9110 * The "local" command.
9112 static int FAST_FUNC
9113 localcmd(int argc UNUSED_PARAM, char **argv)
9118 ash_msg_and_raise_error("not in a function");
9121 while ((name = *argv++) != NULL) {
9127 static int FAST_FUNC
9128 falsecmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
9133 static int FAST_FUNC
9134 truecmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
9139 static int FAST_FUNC
9140 execcmd(int argc UNUSED_PARAM, char **argv)
9143 iflag = 0; /* exit on error */
9146 /* We should set up signals for "exec CMD"
9147 * the same way as for "CMD" without "exec".
9148 * But optschanged->setinteractive->setsignal
9149 * still thought we are a root shell. Therefore, for example,
9150 * SIGQUIT is still set to IGN. Fix it:
9154 /*setsignal(SIGTERM); - unnecessary because of iflag=0 */
9155 /*setsignal(SIGTSTP); - unnecessary because of mflag=0 */
9156 /*setsignal(SIGTTOU); - unnecessary because of mflag=0 */
9158 shellexec(argv + 1, pathval(), 0);
9165 * The return command.
9167 static int FAST_FUNC
9168 returncmd(int argc UNUSED_PARAM, char **argv)
9171 * If called outside a function, do what ksh does;
9172 * skip the rest of the file.
9174 evalskip = SKIPFUNC;
9175 return argv[1] ? number(argv[1]) : exitstatus;
9178 /* Forward declarations for builtintab[] */
9179 static int breakcmd(int, char **) FAST_FUNC;
9180 static int dotcmd(int, char **) FAST_FUNC;
9181 static int evalcmd(int, char **, int) FAST_FUNC;
9182 static int exitcmd(int, char **) FAST_FUNC;
9183 static int exportcmd(int, char **) FAST_FUNC;
9184 #if ENABLE_ASH_GETOPTS
9185 static int getoptscmd(int, char **) FAST_FUNC;
9188 static int helpcmd(int, char **) FAST_FUNC;
9191 static int historycmd(int, char **) FAST_FUNC;
9193 #if ENABLE_SH_MATH_SUPPORT
9194 static int letcmd(int, char **) FAST_FUNC;
9196 static int readcmd(int, char **) FAST_FUNC;
9197 static int setcmd(int, char **) FAST_FUNC;
9198 static int shiftcmd(int, char **) FAST_FUNC;
9199 static int timescmd(int, char **) FAST_FUNC;
9200 static int trapcmd(int, char **) FAST_FUNC;
9201 static int umaskcmd(int, char **) FAST_FUNC;
9202 static int unsetcmd(int, char **) FAST_FUNC;
9203 static int ulimitcmd(int, char **) FAST_FUNC;
9205 #define BUILTIN_NOSPEC "0"
9206 #define BUILTIN_SPECIAL "1"
9207 #define BUILTIN_REGULAR "2"
9208 #define BUILTIN_SPEC_REG "3"
9209 #define BUILTIN_ASSIGN "4"
9210 #define BUILTIN_SPEC_ASSG "5"
9211 #define BUILTIN_REG_ASSG "6"
9212 #define BUILTIN_SPEC_REG_ASSG "7"
9214 /* Stubs for calling non-FAST_FUNC's */
9215 #if ENABLE_ASH_BUILTIN_ECHO
9216 static int FAST_FUNC echocmd(int argc, char **argv) { return echo_main(argc, argv); }
9218 #if ENABLE_ASH_BUILTIN_PRINTF
9219 static int FAST_FUNC printfcmd(int argc, char **argv) { return printf_main(argc, argv); }
9221 #if ENABLE_ASH_BUILTIN_TEST
9222 static int FAST_FUNC testcmd(int argc, char **argv) { return test_main(argc, argv); }
9225 /* Keep these in proper order since it is searched via bsearch() */
9226 static const struct builtincmd builtintab[] = {
9227 { BUILTIN_SPEC_REG "." , dotcmd },
9228 { BUILTIN_SPEC_REG ":" , truecmd },
9229 #if ENABLE_ASH_BUILTIN_TEST
9230 { BUILTIN_REGULAR "[" , testcmd },
9231 #if ENABLE_ASH_BASH_COMPAT
9232 { BUILTIN_REGULAR "[[" , testcmd },
9235 #if ENABLE_ASH_ALIAS
9236 { BUILTIN_REG_ASSG "alias" , aliascmd },
9239 { BUILTIN_REGULAR "bg" , fg_bgcmd },
9241 { BUILTIN_SPEC_REG "break" , breakcmd },
9242 { BUILTIN_REGULAR "cd" , cdcmd },
9243 { BUILTIN_NOSPEC "chdir" , cdcmd },
9244 #if ENABLE_ASH_CMDCMD
9245 { BUILTIN_REGULAR "command" , commandcmd },
9247 { BUILTIN_SPEC_REG "continue", breakcmd },
9248 #if ENABLE_ASH_BUILTIN_ECHO
9249 { BUILTIN_REGULAR "echo" , echocmd },
9251 { BUILTIN_SPEC_REG "eval" , NULL }, /*evalcmd() has a differing prototype*/
9252 { BUILTIN_SPEC_REG "exec" , execcmd },
9253 { BUILTIN_SPEC_REG "exit" , exitcmd },
9254 { BUILTIN_SPEC_REG_ASSG "export" , exportcmd },
9255 { BUILTIN_REGULAR "false" , falsecmd },
9257 { BUILTIN_REGULAR "fg" , fg_bgcmd },
9259 #if ENABLE_ASH_GETOPTS
9260 { BUILTIN_REGULAR "getopts" , getoptscmd },
9262 { BUILTIN_NOSPEC "hash" , hashcmd },
9264 { BUILTIN_NOSPEC "help" , helpcmd },
9267 { BUILTIN_NOSPEC "history" , historycmd },
9270 { BUILTIN_REGULAR "jobs" , jobscmd },
9271 { BUILTIN_REGULAR "kill" , killcmd },
9273 #if ENABLE_SH_MATH_SUPPORT
9274 { BUILTIN_NOSPEC "let" , letcmd },
9276 { BUILTIN_ASSIGN "local" , localcmd },
9277 #if ENABLE_ASH_BUILTIN_PRINTF
9278 { BUILTIN_REGULAR "printf" , printfcmd },
9280 { BUILTIN_NOSPEC "pwd" , pwdcmd },
9281 { BUILTIN_REGULAR "read" , readcmd },
9282 { BUILTIN_SPEC_REG_ASSG "readonly", exportcmd },
9283 { BUILTIN_SPEC_REG "return" , returncmd },
9284 { BUILTIN_SPEC_REG "set" , setcmd },
9285 { BUILTIN_SPEC_REG "shift" , shiftcmd },
9286 #if ENABLE_ASH_BASH_COMPAT
9287 { BUILTIN_SPEC_REG "source" , dotcmd },
9289 #if ENABLE_ASH_BUILTIN_TEST
9290 { BUILTIN_REGULAR "test" , testcmd },
9292 { BUILTIN_SPEC_REG "times" , timescmd },
9293 { BUILTIN_SPEC_REG "trap" , trapcmd },
9294 { BUILTIN_REGULAR "true" , truecmd },
9295 { BUILTIN_NOSPEC "type" , typecmd },
9296 { BUILTIN_NOSPEC "ulimit" , ulimitcmd },
9297 { BUILTIN_REGULAR "umask" , umaskcmd },
9298 #if ENABLE_ASH_ALIAS
9299 { BUILTIN_REGULAR "unalias" , unaliascmd },
9301 { BUILTIN_SPEC_REG "unset" , unsetcmd },
9302 { BUILTIN_REGULAR "wait" , waitcmd },
9305 /* Should match the above table! */
9306 #define COMMANDCMD (builtintab + \
9308 /* [ */ 1 * ENABLE_ASH_BUILTIN_TEST + \
9309 /* [[ */ 1 * ENABLE_ASH_BUILTIN_TEST * ENABLE_ASH_BASH_COMPAT + \
9310 /* alias */ 1 * ENABLE_ASH_ALIAS + \
9311 /* bg */ 1 * ENABLE_ASH_JOB_CONTROL + \
9312 /* break cd cddir */ 3)
9313 #define EVALCMD (COMMANDCMD + \
9314 /* command */ 1 * ENABLE_ASH_CMDCMD + \
9315 /* continue */ 1 + \
9316 /* echo */ 1 * ENABLE_ASH_BUILTIN_ECHO + \
9318 #define EXECCMD (EVALCMD + \
9322 * Search the table of builtin commands.
9324 static struct builtincmd *
9325 find_builtin(const char *name)
9327 struct builtincmd *bp;
9330 name, builtintab, ARRAY_SIZE(builtintab), sizeof(builtintab[0]),
9337 * Execute a simple command.
9340 isassignment(const char *p)
9342 const char *q = endofname(p);
9347 static int FAST_FUNC
9348 bltincmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
9350 /* Preserve exitstatus of a previous possible redirection
9351 * as POSIX mandates */
9352 return back_exitstatus;
9355 evalcommand(union node *cmd, int flags)
9357 static const struct builtincmd null_bltin = {
9358 "\0\0", bltincmd /* why three NULs? */
9360 struct stackmark smark;
9362 struct arglist arglist;
9363 struct arglist varlist;
9366 const struct strlist *sp;
9367 struct cmdentry cmdentry;
9374 struct builtincmd *bcmd;
9375 smallint cmd_is_exec;
9376 smallint pseudovarflag = 0;
9378 /* First expand the arguments. */
9379 TRACE(("evalcommand(0x%lx, %d) called\n", (long)cmd, flags));
9380 setstackmark(&smark);
9381 back_exitstatus = 0;
9383 cmdentry.cmdtype = CMDBUILTIN;
9384 cmdentry.u.cmd = &null_bltin;
9385 varlist.lastp = &varlist.list;
9386 *varlist.lastp = NULL;
9387 arglist.lastp = &arglist.list;
9388 *arglist.lastp = NULL;
9391 if (cmd->ncmd.args) {
9392 bcmd = find_builtin(cmd->ncmd.args->narg.text);
9393 pseudovarflag = bcmd && IS_BUILTIN_ASSIGN(bcmd);
9396 for (argp = cmd->ncmd.args; argp; argp = argp->narg.next) {
9397 struct strlist **spp;
9399 spp = arglist.lastp;
9400 if (pseudovarflag && isassignment(argp->narg.text))
9401 expandarg(argp, &arglist, EXP_VARTILDE);
9403 expandarg(argp, &arglist, EXP_FULL | EXP_TILDE);
9405 for (sp = *spp; sp; sp = sp->next)
9409 argv = nargv = stalloc(sizeof(char *) * (argc + 1));
9410 for (sp = arglist.list; sp; sp = sp->next) {
9411 TRACE(("evalcommand arg: %s\n", sp->text));
9412 *nargv++ = sp->text;
9417 if (iflag && funcnest == 0 && argc > 0)
9418 lastarg = nargv[-1];
9421 expredir(cmd->ncmd.redirect);
9422 status = redirectsafe(cmd->ncmd.redirect, REDIR_PUSH | REDIR_SAVEFD2);
9424 path = vpath.var_text;
9425 for (argp = cmd->ncmd.assign; argp; argp = argp->narg.next) {
9426 struct strlist **spp;
9429 spp = varlist.lastp;
9430 expandarg(argp, &varlist, EXP_VARTILDE);
9433 * Modify the command lookup path, if a PATH= assignment
9437 if (varcmp(p, path) == 0)
9441 /* Print the command if xflag is set. */
9444 const char *p = " %s" + 1;
9446 fdprintf(preverrout_fd, p, expandstr(ps4val()));
9448 for (n = 0; n < 2; n++) {
9450 fdprintf(preverrout_fd, p, sp->text);
9456 safe_write(preverrout_fd, "\n", 1);
9462 /* Now locate the command. */
9464 int cmd_flag = DO_ERR;
9465 #if ENABLE_ASH_CMDCMD
9466 const char *oldpath = path + 5;
9470 find_command(argv[0], &cmdentry, cmd_flag, path);
9471 if (cmdentry.cmdtype == CMDUNKNOWN) {
9472 flush_stdout_stderr();
9477 /* implement bltin and command here */
9478 if (cmdentry.cmdtype != CMDBUILTIN)
9481 spclbltin = IS_BUILTIN_SPECIAL(cmdentry.u.cmd);
9482 if (cmdentry.u.cmd == EXECCMD)
9484 #if ENABLE_ASH_CMDCMD
9485 if (cmdentry.u.cmd == COMMANDCMD) {
9487 nargv = parse_command_args(argv, &path);
9490 /* It's "command [-p] PROG ARGS" (that is, no -Vv).
9491 * nargv => "PROG". path is updated if -p.
9493 argc -= nargv - argv;
9495 cmd_flag |= DO_NOFUNC;
9503 /* We have a redirection error. */
9505 raise_exception(EXERROR);
9507 exitstatus = status;
9511 /* Execute the command. */
9512 switch (cmdentry.cmdtype) {
9515 #if ENABLE_FEATURE_SH_NOFORK
9516 /* (1) BUG: if variables are set, we need to fork, or save/restore them
9517 * around run_nofork_applet() call.
9518 * (2) Should this check also be done in forkshell()?
9519 * (perhaps it should, so that "VAR=VAL nofork" at least avoids exec...)
9521 /* find_command() encodes applet_no as (-2 - applet_no) */
9522 int applet_no = (- cmdentry.u.index - 2);
9523 if (applet_no >= 0 && APPLET_IS_NOFORK(applet_no)) {
9524 listsetvar(varlist.list, VEXPORT|VSTACK);
9525 /* run <applet>_main() */
9526 exitstatus = run_nofork_applet(applet_no, argv);
9530 /* Can we avoid forking off? For example, very last command
9531 * in a script or a subshell does not need forking,
9532 * we can just exec it.
9534 if (!(flags & EV_EXIT) || may_have_traps) {
9535 /* No, forking off a child is necessary */
9537 jp = makejob(/*cmd,*/ 1);
9538 if (forkshell(jp, cmd, FORK_FG) != 0) {
9540 status = waitforjob(jp);
9542 TRACE(("forked child exited with %d\n", status));
9547 /* fall through to exec'ing external program */
9549 listsetvar(varlist.list, VEXPORT|VSTACK);
9550 shellexec(argv, path, cmdentry.u.index);
9554 cmdenviron = varlist.list;
9556 struct strlist *list = cmdenviron;
9558 if (spclbltin > 0 || argc == 0) {
9560 if (cmd_is_exec && argc > 1)
9563 listsetvar(list, i);
9565 /* Tight loop with builtins only:
9566 * "while kill -0 $child; do true; done"
9567 * will never exit even if $child died, unless we do this
9568 * to reap the zombie and make kill detect that it's gone: */
9569 dowait(DOWAIT_NONBLOCK, NULL);
9571 if (evalbltin(cmdentry.u.cmd, argc, argv, flags)) {
9573 int i = exception_type;
9574 if (i == EXEXIT || i == EXEXEC)
9578 exit_status = 128 + SIGINT;
9580 exit_status = 128 + pending_sig;
9581 exitstatus = exit_status;
9582 if (i == EXINT || spclbltin > 0) {
9584 longjmp(exception_handler->loc, 1);
9591 listsetvar(varlist.list, 0);
9592 /* See above for the rationale */
9593 dowait(DOWAIT_NONBLOCK, NULL);
9594 if (evalfun(cmdentry.u.func, argc, argv, flags))
9597 status = exitstatus;
9602 popredir(/*drop:*/ cmd_is_exec, /*restore:*/ cmd_is_exec);
9604 /* dsl: I think this is intended to be used to support
9605 * '_' in 'vi' command mode during line editing...
9606 * However I implemented that within libedit itself.
9608 setvar0("_", lastarg);
9610 popstackmark(&smark);
9616 evalbltin(const struct builtincmd *cmd, int argc, char **argv, int flags)
9618 char *volatile savecmdname;
9619 struct jmploc *volatile savehandler;
9620 struct jmploc jmploc;
9624 savecmdname = commandname;
9625 savehandler = exception_handler;
9626 i = setjmp(jmploc.loc);
9629 exception_handler = &jmploc;
9630 commandname = argv[0];
9632 optptr = NULL; /* initialize nextopt */
9634 status = evalcmd(argc, argv, flags);
9636 status = (*cmd->builtin)(argc, argv);
9637 flush_stdout_stderr();
9638 status |= ferror(stdout);
9639 exitstatus = status;
9642 commandname = savecmdname;
9643 exception_handler = savehandler;
9649 goodname(const char *p)
9651 return endofname(p)[0] == '\0';
9656 * Search for a command. This is called before we fork so that the
9657 * location of the command will be available in the parent as well as
9658 * the child. The check for "goodname" is an overly conservative
9659 * check that the name will not be subject to expansion.
9662 prehash(union node *n)
9664 struct cmdentry entry;
9666 if (n->type == NCMD && n->ncmd.args && goodname(n->ncmd.args->narg.text))
9667 find_command(n->ncmd.args->narg.text, &entry, 0, pathval());
9671 /* ============ Builtin commands
9673 * Builtin commands whose functions are closely tied to evaluation
9674 * are implemented here.
9678 * Handle break and continue commands. Break, continue, and return are
9679 * all handled by setting the evalskip flag. The evaluation routines
9680 * above all check this flag, and if it is set they start skipping
9681 * commands rather than executing them. The variable skipcount is
9682 * the number of loops to break/continue, or the number of function
9683 * levels to return. (The latter is always 1.) It should probably
9684 * be an error to break out of more loops than exist, but it isn't
9685 * in the standard shell so we don't make it one here.
9687 static int FAST_FUNC
9688 breakcmd(int argc UNUSED_PARAM, char **argv)
9690 int n = argv[1] ? number(argv[1]) : 1;
9693 ash_msg_and_raise_error(msg_illnum, argv[1]);
9697 evalskip = (**argv == 'c') ? SKIPCONT : SKIPBREAK;
9704 /* ============ input.c
9706 * This implements the input routines used by the parser.
9710 INPUT_PUSH_FILE = 1,
9711 INPUT_NOFILE_OK = 2,
9714 static smallint checkkwd;
9715 /* values of checkkwd variable */
9716 #define CHKALIAS 0x1
9721 * Push a string back onto the input at this current parsefile level.
9722 * We handle aliases this way.
9724 #if !ENABLE_ASH_ALIAS
9725 #define pushstring(s, ap) pushstring(s)
9728 pushstring(char *s, struct alias *ap)
9735 if (g_parsefile->strpush) {
9736 sp = ckzalloc(sizeof(*sp));
9737 sp->prev = g_parsefile->strpush;
9739 sp = &(g_parsefile->basestrpush);
9741 g_parsefile->strpush = sp;
9742 sp->prev_string = g_parsefile->next_to_pgetc;
9743 sp->prev_left_in_line = g_parsefile->left_in_line;
9744 sp->unget = g_parsefile->unget;
9745 memcpy(sp->lastc, g_parsefile->lastc, sizeof(sp->lastc));
9746 #if ENABLE_ASH_ALIAS
9749 ap->flag |= ALIASINUSE;
9753 g_parsefile->next_to_pgetc = s;
9754 g_parsefile->left_in_line = len;
9755 g_parsefile->unget = 0;
9762 struct strpush *sp = g_parsefile->strpush;
9765 #if ENABLE_ASH_ALIAS
9767 if (g_parsefile->next_to_pgetc[-1] == ' '
9768 || g_parsefile->next_to_pgetc[-1] == '\t'
9770 checkkwd |= CHKALIAS;
9772 if (sp->string != sp->ap->val) {
9775 sp->ap->flag &= ~ALIASINUSE;
9776 if (sp->ap->flag & ALIASDEAD) {
9777 unalias(sp->ap->name);
9781 g_parsefile->next_to_pgetc = sp->prev_string;
9782 g_parsefile->left_in_line = sp->prev_left_in_line;
9783 g_parsefile->unget = sp->unget;
9784 memcpy(g_parsefile->lastc, sp->lastc, sizeof(sp->lastc));
9785 g_parsefile->strpush = sp->prev;
9786 if (sp != &(g_parsefile->basestrpush))
9795 char *buf = g_parsefile->buf;
9797 g_parsefile->next_to_pgetc = buf;
9798 #if ENABLE_FEATURE_EDITING
9800 if (!iflag || g_parsefile->pf_fd != STDIN_FILENO)
9801 nr = nonblock_immune_read(g_parsefile->pf_fd, buf, IBUFSIZ - 1);
9804 # if ENABLE_ASH_IDLE_TIMEOUT
9806 const char *tmout_var = lookupvar("TMOUT");
9808 timeout = atoi(tmout_var) * 1000;
9814 # if ENABLE_FEATURE_TAB_COMPLETION
9815 line_input_state->path_lookup = pathval();
9817 reinit_unicode_for_ash();
9818 nr = read_line_input(line_input_state, cmdedit_prompt, buf, IBUFSIZ, timeout);
9820 /* Ctrl+C pressed */
9831 /* Ctrl+D pressed */
9834 # if ENABLE_ASH_IDLE_TIMEOUT
9835 else if (errno == EAGAIN && timeout > 0) {
9836 puts("\007timed out waiting for input: auto-logout");
9843 nr = nonblock_immune_read(g_parsefile->pf_fd, buf, IBUFSIZ - 1);
9846 #if 0 /* disabled: nonblock_immune_read() handles this problem */
9848 if (parsefile->fd == 0 && errno == EWOULDBLOCK) {
9849 int flags = fcntl(0, F_GETFL);
9850 if (flags >= 0 && (flags & O_NONBLOCK)) {
9851 flags &= ~O_NONBLOCK;
9852 if (fcntl(0, F_SETFL, flags) >= 0) {
9853 out2str("sh: turning off NDELAY mode\n");
9864 * Refill the input buffer and return the next input character:
9866 * 1) If a string was pushed back on the input, pop it;
9867 * 2) If an EOF was pushed back (g_parsefile->left_in_line < -BIGNUM)
9868 * or we are reading from a string so we can't refill the buffer,
9870 * 3) If there is more stuff in this buffer, use it else call read to fill it.
9871 * 4) Process input up to the next newline, deleting nul characters.
9873 //#define pgetc_debug(...) bb_error_msg(__VA_ARGS__)
9874 #define pgetc_debug(...) ((void)0)
9875 static int pgetc(void);
9882 if (g_parsefile->strpush) {
9883 #if ENABLE_ASH_ALIAS
9884 if (g_parsefile->left_in_line == -1
9885 && g_parsefile->strpush->ap
9886 && g_parsefile->next_to_pgetc[-1] != ' '
9887 && g_parsefile->next_to_pgetc[-1] != '\t'
9889 pgetc_debug("preadbuffer PEOA");
9896 /* on both branches above g_parsefile->left_in_line < 0.
9897 * "pgetc" needs refilling.
9900 /* -90 is our -BIGNUM. Below we use -99 to mark "EOF on read",
9901 * pungetc() may increment it a few times.
9902 * Assuming it won't increment it to less than -90.
9904 if (g_parsefile->left_in_line < -90 || g_parsefile->buf == NULL) {
9905 pgetc_debug("preadbuffer PEOF1");
9906 /* even in failure keep left_in_line and next_to_pgetc
9907 * in lock step, for correct multi-layer pungetc.
9908 * left_in_line was decremented before preadbuffer(),
9909 * must inc next_to_pgetc: */
9910 g_parsefile->next_to_pgetc++;
9914 more = g_parsefile->left_in_buffer;
9916 flush_stdout_stderr();
9920 /* don't try reading again */
9921 g_parsefile->left_in_line = -99;
9922 pgetc_debug("preadbuffer PEOF2");
9923 g_parsefile->next_to_pgetc++;
9928 /* Find out where's the end of line.
9929 * Set g_parsefile->left_in_line
9930 * and g_parsefile->left_in_buffer acordingly.
9931 * NUL chars are deleted.
9933 q = g_parsefile->next_to_pgetc;
9941 memmove(q, q + 1, more);
9945 g_parsefile->left_in_line = q - g_parsefile->next_to_pgetc - 1;
9951 g_parsefile->left_in_line = q - g_parsefile->next_to_pgetc - 1;
9952 if (g_parsefile->left_in_line < 0)
9957 g_parsefile->left_in_buffer = more;
9962 out2str(g_parsefile->next_to_pgetc);
9966 pgetc_debug("preadbuffer at %d:%p'%s'",
9967 g_parsefile->left_in_line,
9968 g_parsefile->next_to_pgetc,
9969 g_parsefile->next_to_pgetc);
9970 return (unsigned char)*g_parsefile->next_to_pgetc++;
9978 pgetc_debug("pgetc at %d:%p'%s'",
9979 g_parsefile->left_in_line,
9980 g_parsefile->next_to_pgetc,
9981 g_parsefile->next_to_pgetc);
9982 if (g_parsefile->unget)
9983 return g_parsefile->lastc[--g_parsefile->unget];
9985 if (--g_parsefile->left_in_line >= 0)
9986 c = (signed char)*g_parsefile->next_to_pgetc++;
9990 g_parsefile->lastc[1] = g_parsefile->lastc[0];
9991 g_parsefile->lastc[0] = c;
9996 #if ENABLE_ASH_ALIAS
9998 pgetc_without_PEOA(void)
10002 pgetc_debug("pgetc at %d:%p'%s'",
10003 g_parsefile->left_in_line,
10004 g_parsefile->next_to_pgetc,
10005 g_parsefile->next_to_pgetc);
10007 } while (c == PEOA);
10011 # define pgetc_without_PEOA() pgetc()
10015 * Read a line from the script.
10018 pfgets(char *line, int len)
10024 while (--nleft > 0) {
10025 c = pgetc_without_PEOA();
10040 * Undo a call to pgetc. Only two characters may be pushed back.
10041 * PEOF may be pushed back.
10046 g_parsefile->unget++;
10049 /* This one eats backslash+newline */
10055 while ((c = pgetc()) == '\\') {
10056 if (pgetc() != '\n') {
10061 g_parsefile->linno++;
10062 setprompt_if(doprompt, 2);
10069 * To handle the "." command, a stack of input files is used. Pushfile
10070 * adds a new entry to the stack and popfile restores the previous level.
10075 struct parsefile *pf;
10077 pf = ckzalloc(sizeof(*pf));
10078 pf->prev = g_parsefile;
10080 /*pf->strpush = NULL; - ckzalloc did it */
10081 /*pf->basestrpush.prev = NULL;*/
10089 struct parsefile *pf = g_parsefile;
10092 if (pf->pf_fd >= 0)
10095 while (pf->strpush)
10097 g_parsefile = pf->prev;
10103 * Return to top level.
10108 while (g_parsefile != &basepf)
10113 * Close the file(s) that the shell is reading commands from. Called
10114 * after a fork is done.
10120 if (g_parsefile->pf_fd > 0) {
10121 close(g_parsefile->pf_fd);
10122 g_parsefile->pf_fd = 0;
10127 * Like setinputfile, but takes an open file descriptor. Call this with
10131 setinputfd(int fd, int push)
10133 close_on_exec_on(fd);
10136 g_parsefile->buf = NULL;
10138 g_parsefile->pf_fd = fd;
10139 if (g_parsefile->buf == NULL)
10140 g_parsefile->buf = ckmalloc(IBUFSIZ);
10141 g_parsefile->left_in_buffer = 0;
10142 g_parsefile->left_in_line = 0;
10143 g_parsefile->linno = 1;
10147 * Set the input to take input from a file. If push is set, push the
10148 * old input onto the stack first.
10151 setinputfile(const char *fname, int flags)
10157 fd = open(fname, O_RDONLY);
10159 if (flags & INPUT_NOFILE_OK)
10161 ash_msg_and_raise_error("can't open '%s'", fname);
10164 fd2 = copyfd(fd, 10);
10167 ash_msg_and_raise_error("out of file descriptors");
10170 setinputfd(fd, flags & INPUT_PUSH_FILE);
10177 * Like setinputfile, but takes input from a string.
10180 setinputstring(char *string)
10184 g_parsefile->next_to_pgetc = string;
10185 g_parsefile->left_in_line = strlen(string);
10186 g_parsefile->buf = NULL;
10187 g_parsefile->linno = 1;
10192 /* ============ mail.c
10194 * Routines to check for mail.
10197 #if ENABLE_ASH_MAIL
10199 /* Hash of mtimes of mailboxes */
10200 static unsigned mailtime_hash;
10201 /* Set if MAIL or MAILPATH is changed. */
10202 static smallint mail_var_path_changed;
10205 * Print appropriate message(s) if mail has arrived.
10206 * If mail_var_path_changed is set,
10207 * then the value of MAIL has mail_var_path_changed,
10208 * so we just update the values.
10217 struct stackmark smark;
10220 setstackmark(&smark);
10221 mpath = mpathset() ? mpathval() : mailval();
10224 p = path_advance(&mpath, nullstr);
10229 for (q = p; *q; q++)
10235 q[-1] = '\0'; /* delete trailing '/' */
10236 if (stat(p, &statb) < 0) {
10239 /* Very simplistic "hash": just a sum of all mtimes */
10240 new_hash += (unsigned)statb.st_mtime;
10242 if (!mail_var_path_changed && mailtime_hash != new_hash) {
10243 if (mailtime_hash != 0)
10244 out2str("you have mail\n");
10245 mailtime_hash = new_hash;
10247 mail_var_path_changed = 0;
10248 popstackmark(&smark);
10251 static void FAST_FUNC
10252 changemail(const char *val UNUSED_PARAM)
10254 mail_var_path_changed = 1;
10257 #endif /* ASH_MAIL */
10260 /* ============ ??? */
10263 * Set the shell parameters.
10266 setparam(char **argv)
10272 for (nparam = 0; argv[nparam]; nparam++)
10274 ap = newparam = ckmalloc((nparam + 1) * sizeof(*ap));
10276 *ap++ = ckstrdup(*argv++);
10279 freeparam(&shellparam);
10280 shellparam.malloced = 1;
10281 shellparam.nparam = nparam;
10282 shellparam.p = newparam;
10283 #if ENABLE_ASH_GETOPTS
10284 shellparam.optind = 1;
10285 shellparam.optoff = -1;
10290 * Process shell options. The global variable argptr contains a pointer
10291 * to the argument list; we advance it past the options.
10293 * SUSv3 section 2.8.1 "Consequences of Shell Errors" says:
10294 * For a non-interactive shell, an error condition encountered
10295 * by a special built-in ... shall cause the shell to write a diagnostic message
10296 * to standard error and exit as shown in the following table:
10297 * Error Special Built-In
10299 * Utility syntax error (option or operand error) Shall exit
10301 * However, in bug 1142 (http://busybox.net/bugs/view.php?id=1142)
10302 * we see that bash does not do that (set "finishes" with error code 1 instead,
10303 * and shell continues), and people rely on this behavior!
10305 * set -o barfoo 2>/dev/null
10308 * Oh well. Let's mimic that.
10311 plus_minus_o(char *name, int val)
10316 for (i = 0; i < NOPTS; i++) {
10317 if (strcmp(name, optnames(i)) == 0) {
10322 ash_msg("illegal option %co %s", val ? '-' : '+', name);
10325 for (i = 0; i < NOPTS; i++) {
10327 out1fmt("%-16s%s\n", optnames(i), optlist[i] ? "on" : "off");
10329 out1fmt("set %co %s\n", optlist[i] ? '-' : '+', optnames(i));
10335 setoption(int flag, int val)
10339 for (i = 0; i < NOPTS; i++) {
10340 if (optletters(i) == flag) {
10345 ash_msg_and_raise_error("illegal option %c%c", val ? '-' : '+', flag);
10349 options(int cmdline)
10357 while ((p = *argptr) != NULL) {
10359 if (c != '-' && c != '+')
10362 val = 0; /* val = 0 if c == '+' */
10365 if (p[0] == '\0' || LONE_DASH(p)) {
10367 /* "-" means turn off -x and -v */
10370 /* "--" means reset params */
10371 else if (*argptr == NULL)
10374 break; /* "-" or "--" terminates options */
10377 /* first char was + or - */
10378 while ((c = *p++) != '\0') {
10379 /* bash 3.2 indeed handles -c CMD and +c CMD the same */
10380 if (c == 'c' && cmdline) {
10381 minusc = p; /* command is after shell args */
10382 } else if (c == 'o') {
10383 if (plus_minus_o(*argptr, val)) {
10384 /* it already printed err message */
10385 return 1; /* error */
10389 } else if (cmdline && (c == 'l')) { /* -l or +l == --login */
10391 /* bash does not accept +-login, we also won't */
10392 } else if (cmdline && val && (c == '-')) { /* long options */
10393 if (strcmp(p, "login") == 0)
10405 * The shift builtin command.
10407 static int FAST_FUNC
10408 shiftcmd(int argc UNUSED_PARAM, char **argv)
10415 n = number(argv[1]);
10416 if (n > shellparam.nparam)
10417 n = 0; /* bash compat, was = shellparam.nparam; */
10419 shellparam.nparam -= n;
10420 for (ap1 = shellparam.p; --n >= 0; ap1++) {
10421 if (shellparam.malloced)
10424 ap2 = shellparam.p;
10425 while ((*ap2++ = *ap1++) != NULL)
10427 #if ENABLE_ASH_GETOPTS
10428 shellparam.optind = 1;
10429 shellparam.optoff = -1;
10436 * POSIX requires that 'set' (but not export or readonly) output the
10437 * variables in lexicographic order - by the locale's collating order (sigh).
10438 * Maybe we could keep them in an ordered balanced binary tree
10439 * instead of hashed lists.
10440 * For now just roll 'em through qsort for printing...
10443 showvars(const char *sep_prefix, int on, int off)
10446 char **ep, **epend;
10448 ep = listvars(on, off, &epend);
10449 qsort(ep, epend - ep, sizeof(char *), vpcmp);
10451 sep = *sep_prefix ? " " : sep_prefix;
10453 for (; ep < epend; ep++) {
10457 p = strchrnul(*ep, '=');
10460 q = single_quote(++p);
10461 out1fmt("%s%s%.*s%s\n", sep_prefix, sep, (int)(p - *ep), *ep, q);
10467 * The set command builtin.
10469 static int FAST_FUNC
10470 setcmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
10475 return showvars(nullstr, 0, VUNSET);
10478 retval = options(/*cmdline:*/ 0);
10479 if (retval == 0) { /* if no parse error... */
10481 if (*argptr != NULL) {
10489 #if ENABLE_ASH_RANDOM_SUPPORT
10490 static void FAST_FUNC
10491 change_random(const char *value)
10495 if (value == NULL) {
10496 /* "get", generate */
10497 t = next_random(&random_gen);
10498 /* set without recursion */
10499 setvar(vrandom.var_text, utoa(t), VNOFUNC);
10500 vrandom.flags &= ~VNOFUNC;
10503 t = strtoul(value, NULL, 10);
10504 INIT_RANDOM_T(&random_gen, (t ? t : 1), t);
10509 #if ENABLE_ASH_GETOPTS
10511 getopts(char *optstr, char *optvar, char **optfirst, int *param_optind, int *optoff)
10522 if (*param_optind < 1)
10524 optnext = optfirst + *param_optind - 1;
10526 if (*param_optind <= 1 || *optoff < 0 || (int)strlen(optnext[-1]) < *optoff)
10529 p = optnext[-1] + *optoff;
10530 if (p == NULL || *p == '\0') {
10531 /* Current word is done, advance */
10533 if (p == NULL || *p != '-' || *++p == '\0') {
10540 if (LONE_DASH(p)) /* check for "--" */
10545 for (q = optstr; *q != c;) {
10547 if (optstr[0] == ':') {
10549 /*sbuf[1] = '\0'; - already is */
10550 err |= setvarsafe("OPTARG", sbuf, 0);
10552 fprintf(stderr, "Illegal option -%c\n", c);
10553 unsetvar("OPTARG");
10563 if (*p == '\0' && (p = *optnext) == NULL) {
10564 if (optstr[0] == ':') {
10566 /*sbuf[1] = '\0'; - already is */
10567 err |= setvarsafe("OPTARG", sbuf, 0);
10570 fprintf(stderr, "No arg for -%c option\n", c);
10571 unsetvar("OPTARG");
10579 err |= setvarsafe("OPTARG", p, 0);
10582 err |= setvarsafe("OPTARG", nullstr, 0);
10584 *optoff = p ? p - *(optnext - 1) : -1;
10585 *param_optind = optnext - optfirst + 1;
10586 err |= setvarsafe("OPTIND", itoa(*param_optind), VNOFUNC);
10588 /*sbuf[1] = '\0'; - already is */
10589 err |= setvarsafe(optvar, sbuf, 0);
10593 flush_stdout_stderr();
10594 raise_exception(EXERROR);
10600 * The getopts builtin. Shellparam.optnext points to the next argument
10601 * to be processed. Shellparam.optptr points to the next character to
10602 * be processed in the current argument. If shellparam.optnext is NULL,
10603 * then it's the first time getopts has been called.
10605 static int FAST_FUNC
10606 getoptscmd(int argc, char **argv)
10611 ash_msg_and_raise_error("usage: getopts optstring var [arg]");
10613 optbase = shellparam.p;
10614 if (shellparam.optind > shellparam.nparam + 1) {
10615 shellparam.optind = 1;
10616 shellparam.optoff = -1;
10619 optbase = &argv[3];
10620 if (shellparam.optind > argc - 2) {
10621 shellparam.optind = 1;
10622 shellparam.optoff = -1;
10626 return getopts(argv[1], argv[2], optbase, &shellparam.optind,
10627 &shellparam.optoff);
10629 #endif /* ASH_GETOPTS */
10632 /* ============ Shell parser */
10635 struct heredoc *next; /* next here document in list */
10636 union node *here; /* redirection node */
10637 char *eofmark; /* string indicating end of input */
10638 smallint striptabs; /* if set, strip leading tabs */
10641 static smallint tokpushback; /* last token pushed back */
10642 static smallint quoteflag; /* set if (part of) last token was quoted */
10643 static token_id_t lasttoken; /* last token read (integer id Txxx) */
10644 static struct heredoc *heredoclist; /* list of here documents to read */
10645 static char *wordtext; /* text of last word returned by readtoken */
10646 static struct nodelist *backquotelist;
10647 static union node *redirnode;
10648 static struct heredoc *heredoc;
10650 static const char *
10651 tokname(char *buf, int tok)
10654 return tokname_array[tok] + 1;
10655 sprintf(buf, "\"%s\"", tokname_array[tok] + 1);
10659 /* raise_error_unexpected_syntax:
10660 * Called when an unexpected token is read during the parse. The argument
10661 * is the token that is expected, or -1 if more than one type of token can
10662 * occur at this point.
10664 static void raise_error_unexpected_syntax(int) NORETURN;
10666 raise_error_unexpected_syntax(int token)
10672 l = sprintf(msg, "unexpected %s", tokname(buf, lasttoken));
10674 sprintf(msg + l, " (expecting %s)", tokname(buf, token));
10675 raise_error_syntax(msg);
10679 #define EOFMARKLEN 79
10681 /* parsing is heavily cross-recursive, need these forward decls */
10682 static union node *andor(void);
10683 static union node *pipeline(void);
10684 static union node *parse_command(void);
10685 static void parseheredoc(void);
10686 static int peektoken(void);
10687 static int readtoken(void);
10689 static union node *
10692 union node *n1, *n2, *n3;
10697 switch (peektoken()) {
10705 if (!n1 && (nlflag & 1))
10711 checkkwd = CHKNL | CHKKWD | CHKALIAS;
10712 if (nlflag == 2 && tokname_array[peektoken()][0])
10718 if (tok == TBACKGND) {
10719 if (n2->type == NPIPE) {
10720 n2->npipe.pipe_backgnd = 1;
10722 if (n2->type != NREDIR) {
10723 n3 = stzalloc(sizeof(struct nredir));
10725 /*n3->nredir.redirect = NULL; - stzalloc did it */
10728 n2->type = NBACKGND;
10734 n3 = stzalloc(sizeof(struct nbinary));
10736 n3->nbinary.ch1 = n1;
10737 n3->nbinary.ch2 = n2;
10750 raise_error_unexpected_syntax(-1);
10757 static union node *
10760 union node *n1, *n2, *n3;
10768 } else if (t == TOR) {
10774 checkkwd = CHKNL | CHKKWD | CHKALIAS;
10776 n3 = stzalloc(sizeof(struct nbinary));
10778 n3->nbinary.ch1 = n1;
10779 n3->nbinary.ch2 = n2;
10784 static union node *
10787 union node *n1, *n2, *pipenode;
10788 struct nodelist *lp, *prev;
10792 TRACE(("pipeline: entered\n"));
10793 if (readtoken() == TNOT) {
10795 checkkwd = CHKKWD | CHKALIAS;
10798 n1 = parse_command();
10799 if (readtoken() == TPIPE) {
10800 pipenode = stzalloc(sizeof(struct npipe));
10801 pipenode->type = NPIPE;
10802 /*pipenode->npipe.pipe_backgnd = 0; - stzalloc did it */
10803 lp = stzalloc(sizeof(struct nodelist));
10804 pipenode->npipe.cmdlist = lp;
10808 lp = stzalloc(sizeof(struct nodelist));
10809 checkkwd = CHKNL | CHKKWD | CHKALIAS;
10810 lp->n = parse_command();
10812 } while (readtoken() == TPIPE);
10818 n2 = stzalloc(sizeof(struct nnot));
10826 static union node *
10831 n = stzalloc(sizeof(struct narg));
10833 /*n->narg.next = NULL; - stzalloc did it */
10834 n->narg.text = wordtext;
10835 n->narg.backquote = backquotelist;
10840 fixredir(union node *n, const char *text, int err)
10844 TRACE(("Fix redir %s %d\n", text, err));
10846 n->ndup.vname = NULL;
10848 fd = bb_strtou(text, NULL, 10);
10849 if (!errno && fd >= 0)
10850 n->ndup.dupfd = fd;
10851 else if (LONE_DASH(text))
10852 n->ndup.dupfd = -1;
10855 raise_error_syntax("bad fd number");
10856 n->ndup.vname = makename();
10861 * Returns true if the text contains nothing to expand (no dollar signs
10865 noexpand(const char *text)
10869 while ((c = *text++) != '\0') {
10870 if (c == CTLQUOTEMARK)
10874 else if (SIT(c, BASESYNTAX) == CCTL)
10883 union node *n = redirnode;
10885 if (readtoken() != TWORD)
10886 raise_error_unexpected_syntax(-1);
10887 if (n->type == NHERE) {
10888 struct heredoc *here = heredoc;
10892 if (quoteflag == 0)
10894 TRACE(("Here document %d\n", n->type));
10895 if (!noexpand(wordtext) || (i = strlen(wordtext)) == 0 || i > EOFMARKLEN)
10896 raise_error_syntax("illegal eof marker for << redirection");
10897 rmescapes(wordtext, 0);
10898 here->eofmark = wordtext;
10900 if (heredoclist == NULL)
10901 heredoclist = here;
10903 for (p = heredoclist; p->next; p = p->next)
10907 } else if (n->type == NTOFD || n->type == NFROMFD) {
10908 fixredir(n, wordtext, 0);
10910 n->nfile.fname = makename();
10914 static union node *
10917 union node *args, **app;
10918 union node *n = NULL;
10919 union node *vars, **vpp;
10920 union node **rpp, *redir;
10922 #if ENABLE_ASH_BASH_COMPAT
10923 smallint double_brackets_flag = 0;
10924 smallint function_flag = 0;
10934 savecheckkwd = CHKALIAS;
10937 checkkwd = savecheckkwd;
10940 #if ENABLE_ASH_BASH_COMPAT
10942 if (peektoken() != TWORD)
10943 raise_error_unexpected_syntax(TWORD);
10946 case TAND: /* "&&" */
10947 case TOR: /* "||" */
10948 if (!double_brackets_flag) {
10952 wordtext = (char *) (t == TAND ? "-a" : "-o");
10955 n = stzalloc(sizeof(struct narg));
10957 /*n->narg.next = NULL; - stzalloc did it */
10958 n->narg.text = wordtext;
10959 #if ENABLE_ASH_BASH_COMPAT
10960 if (strcmp("[[", wordtext) == 0)
10961 double_brackets_flag = 1;
10962 else if (strcmp("]]", wordtext) == 0)
10963 double_brackets_flag = 0;
10965 n->narg.backquote = backquotelist;
10966 if (savecheckkwd && isassignment(wordtext)) {
10968 vpp = &n->narg.next;
10971 app = &n->narg.next;
10974 #if ENABLE_ASH_BASH_COMPAT
10975 if (function_flag) {
10976 checkkwd = CHKNL | CHKKWD;
10977 switch (peektoken()) {
10989 if (strcmp("[[", wordtext) == 0)
10993 raise_error_unexpected_syntax(-1);
10999 *rpp = n = redirnode;
11000 rpp = &n->nfile.next;
11001 parsefname(); /* read name of redirection file */
11004 IF_ASH_BASH_COMPAT(do_func:)
11005 if (args && app == &args->narg.next
11008 struct builtincmd *bcmd;
11011 /* We have a function */
11012 if (IF_ASH_BASH_COMPAT(!function_flag &&) readtoken() != TRP)
11013 raise_error_unexpected_syntax(TRP);
11014 name = n->narg.text;
11015 if (!goodname(name)
11016 || ((bcmd = find_builtin(name)) && IS_BUILTIN_SPECIAL(bcmd))
11018 raise_error_syntax("bad function name");
11021 checkkwd = CHKNL | CHKKWD | CHKALIAS;
11022 n->narg.next = parse_command();
11025 IF_ASH_BASH_COMPAT(function_flag = 0;)
11036 n = stzalloc(sizeof(struct ncmd));
11038 n->ncmd.args = args;
11039 n->ncmd.assign = vars;
11040 n->ncmd.redirect = redir;
11044 static union node *
11045 parse_command(void)
11047 union node *n1, *n2;
11048 union node *ap, **app;
11049 union node *cp, **cpp;
11050 union node *redir, **rpp;
11057 switch (readtoken()) {
11059 raise_error_unexpected_syntax(-1);
11062 n1 = stzalloc(sizeof(struct nif));
11064 n1->nif.test = list(0);
11065 if (readtoken() != TTHEN)
11066 raise_error_unexpected_syntax(TTHEN);
11067 n1->nif.ifpart = list(0);
11069 while (readtoken() == TELIF) {
11070 n2->nif.elsepart = stzalloc(sizeof(struct nif));
11071 n2 = n2->nif.elsepart;
11073 n2->nif.test = list(0);
11074 if (readtoken() != TTHEN)
11075 raise_error_unexpected_syntax(TTHEN);
11076 n2->nif.ifpart = list(0);
11078 if (lasttoken == TELSE)
11079 n2->nif.elsepart = list(0);
11081 n2->nif.elsepart = NULL;
11089 n1 = stzalloc(sizeof(struct nbinary));
11090 n1->type = (lasttoken == TWHILE) ? NWHILE : NUNTIL;
11091 n1->nbinary.ch1 = list(0);
11094 TRACE(("expecting DO got '%s' %s\n", tokname_array[got] + 1,
11095 got == TWORD ? wordtext : ""));
11096 raise_error_unexpected_syntax(TDO);
11098 n1->nbinary.ch2 = list(0);
11103 if (readtoken() != TWORD || quoteflag || !goodname(wordtext))
11104 raise_error_syntax("bad for loop variable");
11105 n1 = stzalloc(sizeof(struct nfor));
11107 n1->nfor.var = wordtext;
11108 checkkwd = CHKNL | CHKKWD | CHKALIAS;
11109 if (readtoken() == TIN) {
11111 while (readtoken() == TWORD) {
11112 n2 = stzalloc(sizeof(struct narg));
11114 /*n2->narg.next = NULL; - stzalloc did it */
11115 n2->narg.text = wordtext;
11116 n2->narg.backquote = backquotelist;
11118 app = &n2->narg.next;
11121 n1->nfor.args = ap;
11122 if (lasttoken != TNL && lasttoken != TSEMI)
11123 raise_error_unexpected_syntax(-1);
11125 n2 = stzalloc(sizeof(struct narg));
11127 /*n2->narg.next = NULL; - stzalloc did it */
11128 n2->narg.text = (char *)dolatstr;
11129 /*n2->narg.backquote = NULL;*/
11130 n1->nfor.args = n2;
11132 * Newline or semicolon here is optional (but note
11133 * that the original Bourne shell only allowed NL).
11135 if (lasttoken != TSEMI)
11138 checkkwd = CHKNL | CHKKWD | CHKALIAS;
11139 if (readtoken() != TDO)
11140 raise_error_unexpected_syntax(TDO);
11141 n1->nfor.body = list(0);
11145 n1 = stzalloc(sizeof(struct ncase));
11147 if (readtoken() != TWORD)
11148 raise_error_unexpected_syntax(TWORD);
11149 n1->ncase.expr = n2 = stzalloc(sizeof(struct narg));
11151 /*n2->narg.next = NULL; - stzalloc did it */
11152 n2->narg.text = wordtext;
11153 n2->narg.backquote = backquotelist;
11154 checkkwd = CHKNL | CHKKWD | CHKALIAS;
11155 if (readtoken() != TIN)
11156 raise_error_unexpected_syntax(TIN);
11157 cpp = &n1->ncase.cases;
11159 checkkwd = CHKNL | CHKKWD;
11161 while (t != TESAC) {
11162 if (lasttoken == TLP)
11164 *cpp = cp = stzalloc(sizeof(struct nclist));
11166 app = &cp->nclist.pattern;
11168 *app = ap = stzalloc(sizeof(struct narg));
11170 /*ap->narg.next = NULL; - stzalloc did it */
11171 ap->narg.text = wordtext;
11172 ap->narg.backquote = backquotelist;
11173 if (readtoken() != TPIPE)
11175 app = &ap->narg.next;
11178 //ap->narg.next = NULL;
11179 if (lasttoken != TRP)
11180 raise_error_unexpected_syntax(TRP);
11181 cp->nclist.body = list(2);
11183 cpp = &cp->nclist.next;
11185 checkkwd = CHKNL | CHKKWD;
11189 raise_error_unexpected_syntax(TENDCASE);
11196 n1 = stzalloc(sizeof(struct nredir));
11197 n1->type = NSUBSHELL;
11198 n1->nredir.n = list(0);
11199 /*n1->nredir.redirect = NULL; - stzalloc did it */
11206 IF_ASH_BASH_COMPAT(case TFUNCTION:)
11210 return simplecmd();
11213 if (readtoken() != t)
11214 raise_error_unexpected_syntax(t);
11217 /* Now check for redirection which may follow command */
11218 checkkwd = CHKKWD | CHKALIAS;
11220 while (readtoken() == TREDIR) {
11221 *rpp = n2 = redirnode;
11222 rpp = &n2->nfile.next;
11228 if (n1->type != NSUBSHELL) {
11229 n2 = stzalloc(sizeof(struct nredir));
11234 n1->nredir.redirect = redir;
11239 #if ENABLE_ASH_BASH_COMPAT
11240 static int decode_dollar_squote(void)
11242 static const char C_escapes[] ALIGN1 = "nrbtfav""x\\01234567";
11248 p = strchr(C_escapes, c);
11253 if ((unsigned char)(c - '0') <= 7) { /* \ooo */
11257 } while ((unsigned char)(c - '0') <= 7 && --cnt);
11259 } else if (c == 'x') { /* \xHH */
11263 } while (isxdigit(c) && --cnt);
11265 if (cnt == 3) { /* \x but next char is "bad" */
11269 } else { /* simple seq like \\ or \t */
11274 c = bb_process_escape_sequence((void*)&p);
11275 } else { /* unrecognized "\z": print both chars unless ' or " */
11276 if (c != '\'' && c != '"') {
11278 c |= 0x100; /* "please encode \, then me" */
11286 * If eofmark is NULL, read a word or a redirection symbol. If eofmark
11287 * is not NULL, read a here document. In the latter case, eofmark is the
11288 * word which marks the end of the document and striptabs is true if
11289 * leading tabs should be stripped from the document. The argument c
11290 * is the first character of the input token or document.
11292 * Because C does not have internal subroutines, I have simulated them
11293 * using goto's to implement the subroutine linkage. The following macros
11294 * will run code that appears at the end of readtoken1.
11296 #define CHECKEND() {goto checkend; checkend_return:;}
11297 #define PARSEREDIR() {goto parseredir; parseredir_return:;}
11298 #define PARSESUB() {goto parsesub; parsesub_return:;}
11299 #define PARSEBACKQOLD() {oldstyle = 1; goto parsebackq; parsebackq_oldreturn:;}
11300 #define PARSEBACKQNEW() {oldstyle = 0; goto parsebackq; parsebackq_newreturn:;}
11301 #define PARSEARITH() {goto parsearith; parsearith_return:;}
11303 readtoken1(int c, int syntax, char *eofmark, int striptabs)
11305 /* NB: syntax parameter fits into smallint */
11306 /* c parameter is an unsigned char or PEOF or PEOA */
11309 char line[EOFMARKLEN + 1];
11310 struct nodelist *bqlist;
11314 smallint prevsyntax; /* syntax before arithmetic */
11315 #if ENABLE_ASH_EXPAND_PRMT
11316 smallint pssyntax; /* we are expanding a prompt string */
11318 int varnest; /* levels of variables expansion */
11319 int arinest; /* levels of arithmetic expansion */
11320 int parenlevel; /* levels of parens in arithmetic */
11321 int dqvarnest; /* levels of variables expansion within double quotes */
11323 IF_ASH_BASH_COMPAT(smallint bash_dollar_squote = 0;)
11325 startlinno = g_parsefile->linno;
11329 #if ENABLE_ASH_EXPAND_PRMT
11330 pssyntax = (syntax == PSSYNTAX);
11334 dblquote = (syntax == DQSYNTAX);
11340 STARTSTACKSTR(out);
11342 /* For each line, until end of word */
11343 CHECKEND(); /* set c to PEOF if at end of here document */
11344 for (;;) { /* until end of line or end of word */
11345 CHECKSTRSPACE(4, out); /* permit 4 calls to USTPUTC */
11346 switch (SIT(c, syntax)) {
11347 case CNL: /* '\n' */
11348 if (syntax == BASESYNTAX)
11349 goto endword; /* exit outer loop */
11351 g_parsefile->linno++;
11352 setprompt_if(doprompt, 2);
11354 goto loop; /* continue outer loop */
11359 #if ENABLE_ASH_BASH_COMPAT
11360 if (c == '\\' && bash_dollar_squote) {
11361 c = decode_dollar_squote();
11363 /* skip $'\000', $'\x00' (like bash) */
11367 /* Unknown escape. Encode as '\z' */
11368 c = (unsigned char)c;
11369 if (eofmark == NULL || dblquote)
11370 USTPUTC(CTLESC, out);
11371 USTPUTC('\\', out);
11375 if (eofmark == NULL || dblquote)
11376 USTPUTC(CTLESC, out);
11379 case CBACK: /* backslash */
11380 c = pgetc_without_PEOA();
11382 USTPUTC(CTLESC, out);
11383 USTPUTC('\\', out);
11385 } else if (c == '\n') {
11386 setprompt_if(doprompt, 2);
11388 #if ENABLE_ASH_EXPAND_PRMT
11389 if (c == '$' && pssyntax) {
11390 USTPUTC(CTLESC, out);
11391 USTPUTC('\\', out);
11394 /* Backslash is retained if we are in "str" and next char isn't special */
11399 && (c != '"' || eofmark != NULL)
11401 USTPUTC('\\', out);
11403 USTPUTC(CTLESC, out);
11411 if (eofmark == NULL) {
11412 USTPUTC(CTLQUOTEMARK, out);
11420 IF_ASH_BASH_COMPAT(bash_dollar_squote = 0;)
11421 if (eofmark != NULL && varnest == 0) {
11424 if (dqvarnest == 0) {
11425 syntax = BASESYNTAX;
11432 case CVAR: /* '$' */
11433 PARSESUB(); /* parse substitution */
11435 case CENDVAR: /* '}' */
11438 if (dqvarnest > 0) {
11445 #if ENABLE_SH_MATH_SUPPORT
11446 case CLP: /* '(' in arithmetic */
11450 case CRP: /* ')' in arithmetic */
11451 if (parenlevel > 0) {
11454 if (pgetc_eatbnl() == ')') {
11456 if (--arinest == 0) {
11457 syntax = prevsyntax;
11461 * unbalanced parens
11462 * (don't 2nd guess - no error)
11470 case CBQUOTE: /* '`' */
11474 goto endword; /* exit outer loop */
11478 if (varnest == 0) {
11479 #if ENABLE_ASH_BASH_COMPAT
11481 //Can't call pgetc_eatbnl() here, this requires three-deep pungetc()
11482 if (pgetc() == '>')
11483 c = 0x100 + '>'; /* flag &> */
11487 goto endword; /* exit outer loop */
11489 IF_ASH_ALIAS(if (c != PEOA))
11496 #if ENABLE_SH_MATH_SUPPORT
11497 if (syntax == ARISYNTAX)
11498 raise_error_syntax("missing '))'");
11500 if (syntax != BASESYNTAX && eofmark == NULL)
11501 raise_error_syntax("unterminated quoted string");
11502 if (varnest != 0) {
11503 startlinno = g_parsefile->linno;
11505 raise_error_syntax("missing '}'");
11507 USTPUTC('\0', out);
11508 len = out - (char *)stackblock();
11509 out = stackblock();
11510 if (eofmark == NULL) {
11511 if ((c == '>' || c == '<' IF_ASH_BASH_COMPAT( || c == 0x100 + '>'))
11514 if (isdigit_str9(out)) {
11515 PARSEREDIR(); /* passed as params: out, c */
11516 lasttoken = TREDIR;
11519 /* else: non-number X seen, interpret it
11520 * as "NNNX>file" = "NNNX >file" */
11524 quoteflag = quotef;
11525 backquotelist = bqlist;
11526 grabstackblock(len);
11530 /* end of readtoken routine */
11533 * Check to see whether we are at the end of the here document. When this
11534 * is called, c is set to the first character of the next input line. If
11535 * we are at the end of the here document, this routine sets the c to PEOF.
11539 #if ENABLE_ASH_ALIAS
11541 c = pgetc_without_PEOA();
11544 while (c == '\t') {
11545 c = pgetc_without_PEOA();
11548 if (c == *eofmark) {
11549 if (pfgets(line, sizeof(line)) != NULL) {
11553 for (q = eofmark + 1; *q && *p == *q; p++, q++)
11555 if (*p == '\n' && *q == '\0') {
11557 g_parsefile->linno++;
11558 needprompt = doprompt;
11560 pushstring(line, NULL);
11565 goto checkend_return;
11569 * Parse a redirection operator. The variable "out" points to a string
11570 * specifying the fd to be redirected. The variable "c" contains the
11571 * first character of the redirection operator.
11574 /* out is already checked to be a valid number or "" */
11575 int fd = (*out == '\0' ? -1 : atoi(out));
11578 np = stzalloc(sizeof(struct nfile));
11583 np->type = NAPPEND;
11585 np->type = NCLOBBER;
11588 /* it also can be NTO2 (>&file), but we can't figure it out yet */
11594 #if ENABLE_ASH_BASH_COMPAT
11595 else if (c == 0x100 + '>') { /* this flags &> redirection */
11597 pgetc(); /* this is '>', no need to check */
11601 else { /* c == '<' */
11602 /*np->nfile.fd = 0; - stzalloc did it */
11606 if (sizeof(struct nfile) != sizeof(struct nhere)) {
11607 np = stzalloc(sizeof(struct nhere));
11608 /*np->nfile.fd = 0; - stzalloc did it */
11611 heredoc = stzalloc(sizeof(struct heredoc));
11612 heredoc->here = np;
11615 heredoc->striptabs = 1;
11617 /*heredoc->striptabs = 0; - stzalloc did it */
11623 np->type = NFROMFD;
11627 np->type = NFROMTO;
11639 goto parseredir_return;
11643 * Parse a substitution. At this point, we have read the dollar sign
11644 * and nothing else.
11647 /* is_special(c) evaluates to 1 for c in "!#$*-0123456789?@"; 0 otherwise
11648 * (assuming ascii char codes, as the original implementation did) */
11649 #define is_special(c) \
11650 (((unsigned)(c) - 33 < 32) \
11651 && ((0xc1ff920dU >> ((unsigned)(c) - 33)) & 1))
11653 unsigned char subtype;
11657 c = pgetc_eatbnl();
11658 if (c > 255 /* PEOA or PEOF */
11659 || (c != '(' && c != '{' && !is_name(c) && !is_special(c))
11661 #if ENABLE_ASH_BASH_COMPAT
11662 if (syntax != DQSYNTAX && c == '\'')
11663 bash_dollar_squote = 1;
11668 } else if (c == '(') {
11669 /* $(command) or $((arith)) */
11670 if (pgetc_eatbnl() == '(') {
11671 #if ENABLE_SH_MATH_SUPPORT
11674 raise_error_syntax("you disabled math support for $((arith)) syntax");
11681 /* $VAR, $<specialchar>, ${...}, or PEOA/PEOF */
11682 USTPUTC(CTLVAR, out);
11683 typeloc = out - (char *)stackblock();
11684 USTPUTC(VSNORMAL, out);
11685 subtype = VSNORMAL;
11687 c = pgetc_eatbnl();
11689 c = pgetc_eatbnl();
11691 c = '#'; /* ${#} - same as $# */
11693 subtype = VSLENGTH; /* ${#VAR} */
11698 if (c <= 255 /* not PEOA or PEOF */ && is_name(c)) {
11699 /* $[{[#]]NAME[}] */
11702 c = pgetc_eatbnl();
11703 } while (c <= 255 /* not PEOA or PEOF */ && is_in_name(c));
11704 } else if (isdigit(c)) {
11705 /* $[{[#]]NUM[}] */
11708 c = pgetc_eatbnl();
11709 } while (isdigit(c));
11710 } else if (is_special(c)) {
11711 /* $[{[#]]<specialchar>[}] */
11713 c = pgetc_eatbnl();
11716 raise_error_syntax("bad substitution");
11718 if (c != '}' && subtype == VSLENGTH) {
11719 /* ${#VAR didn't end with } */
11725 if (subtype == 0) {
11726 static const char types[] ALIGN1 = "}-+?=";
11727 /* ${VAR...} but not $VAR or ${#VAR} */
11728 /* c == first char after VAR */
11731 c = pgetc_eatbnl();
11732 #if ENABLE_ASH_BASH_COMPAT
11733 /* This check is only needed to not misinterpret
11734 * ${VAR:-WORD}, ${VAR:+WORD}, ${VAR:=WORD}, ${VAR:?WORD}
11737 if (!strchr(types, c)) {
11738 subtype = VSSUBSTR;
11740 break; /* "goto do_pungetc" is bigger (!) */
11746 const char *p = strchr(types, c);
11749 subtype = p - types + VSNORMAL;
11755 subtype = (c == '#' ? VSTRIMLEFT : VSTRIMRIGHT);
11756 c = pgetc_eatbnl();
11762 #if ENABLE_ASH_BASH_COMPAT
11764 /* ${v/[/]pattern/repl} */
11765 //TODO: encode pattern and repl separately.
11766 // Currently ${v/$var_with_slash/repl} is horribly broken
11767 subtype = VSREPLACE;
11768 c = pgetc_eatbnl();
11771 subtype++; /* VSREPLACEALL */
11779 ((unsigned char *)stackblock())[typeloc] = subtype | flags;
11780 if (subtype != VSNORMAL) {
11787 goto parsesub_return;
11791 * Called to parse command substitutions. Newstyle is set if the command
11792 * is enclosed inside $(...); nlpp is a pointer to the head of the linked
11793 * list of commands (passed by reference), and savelen is the number of
11794 * characters on the top of the stack which must be preserved.
11797 struct nodelist **nlpp;
11801 smallint saveprompt = 0;
11804 savelen = out - (char *)stackblock();
11807 * FIXME: this can allocate very large block on stack and SEGV.
11809 * echo "..<100kbytes>..`true` $(true) `true` ..."
11810 * allocates 100kb for every command subst. With about
11811 * a hundred command substitutions stack overflows.
11812 * With larger prepended string, SEGV happens sooner.
11814 str = alloca(savelen);
11815 memcpy(str, stackblock(), savelen);
11819 /* We must read until the closing backquote, giving special
11820 * treatment to some slashes, and then push the string and
11821 * reread it as input, interpreting it normally.
11827 STARTSTACKSTR(pout);
11831 setprompt_if(needprompt, 2);
11840 g_parsefile->linno++;
11841 setprompt_if(doprompt, 2);
11843 * If eating a newline, avoid putting
11844 * the newline into the new character
11845 * stream (via the STPUTC after the
11850 if (pc != '\\' && pc != '`' && pc != '$'
11851 && (!dblquote || pc != '"')
11853 STPUTC('\\', pout);
11855 if (pc <= 255 /* not PEOA or PEOF */) {
11861 IF_ASH_ALIAS(case PEOA:)
11862 startlinno = g_parsefile->linno;
11863 raise_error_syntax("EOF in backquote substitution");
11866 g_parsefile->linno++;
11867 needprompt = doprompt;
11876 STPUTC('\0', pout);
11877 psavelen = pout - (char *)stackblock();
11878 if (psavelen > 0) {
11879 pstr = grabstackstr(pout);
11880 setinputstring(pstr);
11885 nlpp = &(*nlpp)->next;
11886 *nlpp = stzalloc(sizeof(**nlpp));
11887 /* (*nlpp)->next = NULL; - stzalloc did it */
11890 saveprompt = doprompt;
11897 doprompt = saveprompt;
11898 else if (readtoken() != TRP)
11899 raise_error_unexpected_syntax(TRP);
11904 * Start reading from old file again, ignoring any pushed back
11905 * tokens left from the backquote parsing
11910 while (stackblocksize() <= savelen)
11912 STARTSTACKSTR(out);
11914 memcpy(out, str, savelen);
11915 STADJUST(savelen, out);
11917 USTPUTC(CTLBACKQ, out);
11919 goto parsebackq_oldreturn;
11920 goto parsebackq_newreturn;
11923 #if ENABLE_SH_MATH_SUPPORT
11925 * Parse an arithmetic expansion (indicate start of one and set state)
11928 if (++arinest == 1) {
11929 prevsyntax = syntax;
11930 syntax = ARISYNTAX;
11932 USTPUTC(CTLARI, out);
11933 goto parsearith_return;
11936 } /* end of readtoken */
11939 * Read the next input token.
11940 * If the token is a word, we set backquotelist to the list of cmds in
11941 * backquotes. We set quoteflag to true if any part of the word was
11943 * If the token is TREDIR, then we set redirnode to a structure containing
11945 * In all cases, the variable startlinno is set to the number of the line
11946 * on which the token starts.
11948 * [Change comment: here documents and internal procedures]
11949 * [Readtoken shouldn't have any arguments. Perhaps we should make the
11950 * word parsing code into a separate routine. In this case, readtoken
11951 * doesn't need to have any internal procedures, but parseword does.
11952 * We could also make parseoperator in essence the main routine, and
11953 * have parseword (readtoken1?) handle both words and redirection.]
11955 #define NEW_xxreadtoken
11956 #ifdef NEW_xxreadtoken
11957 /* singles must be first! */
11958 static const char xxreadtoken_chars[7] ALIGN1 = {
11959 '\n', '(', ')', /* singles */
11960 '&', '|', ';', /* doubles */
11964 #define xxreadtoken_singles 3
11965 #define xxreadtoken_doubles 3
11967 static const char xxreadtoken_tokens[] ALIGN1 = {
11968 TNL, TLP, TRP, /* only single occurrence allowed */
11969 TBACKGND, TPIPE, TSEMI, /* if single occurrence */
11970 TEOF, /* corresponds to trailing nul */
11971 TAND, TOR, TENDCASE /* if double occurrence */
11983 setprompt_if(needprompt, 2);
11984 startlinno = g_parsefile->linno;
11985 for (;;) { /* until token or start of word found */
11987 if (c == ' ' || c == '\t' IF_ASH_ALIAS( || c == PEOA))
11991 while ((c = pgetc()) != '\n' && c != PEOF)
11994 } else if (c == '\\') {
11995 if (pgetc() != '\n') {
11997 break; /* return readtoken1(...) */
11999 startlinno = ++g_parsefile->linno;
12000 setprompt_if(doprompt, 2);
12004 p = xxreadtoken_chars + sizeof(xxreadtoken_chars) - 1;
12007 g_parsefile->linno++;
12008 needprompt = doprompt;
12011 p = strchr(xxreadtoken_chars, c);
12013 break; /* return readtoken1(...) */
12015 if ((int)(p - xxreadtoken_chars) >= xxreadtoken_singles) {
12017 if (cc == c) { /* double occurrence? */
12018 p += xxreadtoken_doubles + 1;
12021 #if ENABLE_ASH_BASH_COMPAT
12022 if (c == '&' && cc == '>') /* &> */
12023 break; /* return readtoken1(...) */
12028 lasttoken = xxreadtoken_tokens[p - xxreadtoken_chars];
12033 return readtoken1(c, BASESYNTAX, (char *) NULL, 0);
12035 #else /* old xxreadtoken */
12036 #define RETURN(token) return lasttoken = token
12046 setprompt_if(needprompt, 2);
12047 startlinno = g_parsefile->linno;
12048 for (;;) { /* until token or start of word found */
12051 case ' ': case '\t':
12052 IF_ASH_ALIAS(case PEOA:)
12055 while ((c = pgetc()) != '\n' && c != PEOF)
12060 if (pgetc() == '\n') {
12061 startlinno = ++g_parsefile->linno;
12062 setprompt_if(doprompt, 2);
12068 g_parsefile->linno++;
12069 needprompt = doprompt;
12074 if (pgetc() == '&')
12079 if (pgetc() == '|')
12084 if (pgetc() == ';')
12097 return readtoken1(c, BASESYNTAX, (char *)NULL, 0);
12100 #endif /* old xxreadtoken */
12106 int kwd = checkkwd;
12108 smallint alreadyseen = tokpushback;
12111 #if ENABLE_ASH_ALIAS
12127 if (t != TWORD || quoteflag) {
12132 * check for keywords
12134 if (kwd & CHKKWD) {
12135 const char *const *pp;
12137 pp = findkwd(wordtext);
12139 lasttoken = t = pp - tokname_array;
12140 TRACE(("keyword '%s' recognized\n", tokname_array[t] + 1));
12145 if (checkkwd & CHKALIAS) {
12146 #if ENABLE_ASH_ALIAS
12148 ap = lookupalias(wordtext, 1);
12151 pushstring(ap->val, ap);
12161 TRACE(("token '%s' %s\n", tokname_array[t] + 1, t == TWORD ? wordtext : ""));
12163 TRACE(("reread token '%s' %s\n", tokname_array[t] + 1, t == TWORD ? wordtext : ""));
12179 * Read and parse a command. Returns NODE_EOF on end of file.
12180 * (NULL is a valid parse tree indicating a blank line.)
12182 static union node *
12183 parsecmd(int interact)
12188 doprompt = interact;
12189 setprompt_if(doprompt, doprompt);
12195 * Input any here documents.
12200 struct heredoc *here;
12203 here = heredoclist;
12204 heredoclist = NULL;
12207 setprompt_if(needprompt, 2);
12208 readtoken1(pgetc(), here->here->type == NHERE ? SQSYNTAX : DQSYNTAX,
12209 here->eofmark, here->striptabs);
12210 n = stzalloc(sizeof(struct narg));
12211 n->narg.type = NARG;
12212 /*n->narg.next = NULL; - stzalloc did it */
12213 n->narg.text = wordtext;
12214 n->narg.backquote = backquotelist;
12215 here->here->nhere.doc = n;
12222 * called by editline -- any expansions to the prompt should be added here.
12224 #if ENABLE_ASH_EXPAND_PRMT
12225 static const char *
12226 expandstr(const char *ps)
12230 /* XXX Fix (char *) cast. It _is_ a bug. ps is variable's value,
12231 * and token processing _can_ alter it (delete NULs etc). */
12232 setinputstring((char *)ps);
12233 readtoken1(pgetc(), PSSYNTAX, nullstr, 0);
12236 n.narg.type = NARG;
12237 n.narg.next = NULL;
12238 n.narg.text = wordtext;
12239 n.narg.backquote = backquotelist;
12241 expandarg(&n, NULL, EXP_QUOTED);
12242 return stackblock();
12247 * Execute a command or commands contained in a string.
12250 evalstring(char *s, int flags)
12253 struct stackmark smark;
12258 setstackmark(&smark);
12261 while ((n = parsecmd(0)) != NODE_EOF) {
12264 i = evaltree(n, flags);
12267 popstackmark(&smark);
12271 popstackmark(&smark);
12279 * The eval command.
12281 static int FAST_FUNC
12282 evalcmd(int argc UNUSED_PARAM, char **argv, int flags)
12291 STARTSTACKSTR(concat);
12293 concat = stack_putstr(p, concat);
12297 STPUTC(' ', concat);
12299 STPUTC('\0', concat);
12300 p = grabstackstr(concat);
12302 return evalstring(p, flags & EV_TESTED);
12308 * Read and execute commands.
12309 * "Top" is nonzero for the top level command loop;
12310 * it turns on prompting if the shell is interactive.
12316 struct stackmark smark;
12321 TRACE(("cmdloop(%d) called\n", top));
12325 setstackmark(&smark);
12328 showjobs(SHOW_CHANGED|SHOW_STDERR);
12331 if (iflag && top) {
12335 n = parsecmd(inter);
12337 if (DEBUG > 2 && debug && (n != NODE_EOF))
12340 if (n == NODE_EOF) {
12341 if (!top || numeof >= 50)
12343 if (!stoppedjobs()) {
12346 out2str("\nUse \"exit\" to leave shell.\n");
12349 } else if (nflag == 0) {
12352 /* job_warning can only be 2,1,0. Here 2->1, 1/0->0 */
12355 i = evaltree(n, 0);
12359 popstackmark(&smark);
12363 evalskip &= ~SKIPFUNC;
12371 * Take commands from a file. To be compatible we should do a path
12372 * search for the file, which is necessary to find sub-commands.
12375 find_dot_file(char *name)
12378 const char *path = pathval();
12381 /* don't try this for absolute or relative paths */
12382 if (strchr(name, '/'))
12385 /* IIRC standards do not say whether . is to be searched.
12386 * And it is even smaller this way, making it unconditional for now:
12388 if (1) { /* ENABLE_ASH_BASH_COMPAT */
12393 while ((fullname = path_advance(&path, name)) != NULL) {
12395 if ((stat(fullname, &statb) == 0) && S_ISREG(statb.st_mode)) {
12397 * Don't bother freeing here, since it will
12398 * be freed by the caller.
12402 if (fullname != name)
12403 stunalloc(fullname);
12406 /* not found in the PATH */
12407 ash_msg_and_raise_error("%s: not found", name);
12411 static int FAST_FUNC
12412 dotcmd(int argc, char **argv)
12415 struct strlist *sp;
12416 volatile struct shparam saveparam;
12418 for (sp = cmdenviron; sp; sp = sp->next)
12419 setvareq(ckstrdup(sp->text), VSTRFIXED | VTEXTFIXED);
12422 /* bash says: "bash: .: filename argument required" */
12423 return 2; /* bash compat */
12426 /* "false; . empty_file; echo $?" should print 0, not 1: */
12429 /* This aborts if file isn't found, which is POSIXly correct.
12430 * bash returns exitcode 1 instead.
12432 fullname = find_dot_file(argv[1]);
12435 if (argc) { /* argc > 0, argv[0] != NULL */
12436 saveparam = shellparam;
12437 shellparam.malloced = 0;
12438 shellparam.nparam = argc;
12439 shellparam.p = argv;
12442 /* This aborts if file can't be opened, which is POSIXly correct.
12443 * bash returns exitcode 1 instead.
12445 setinputfile(fullname, INPUT_PUSH_FILE);
12446 commandname = fullname;
12451 freeparam(&shellparam);
12452 shellparam = saveparam;
12458 static int FAST_FUNC
12459 exitcmd(int argc UNUSED_PARAM, char **argv)
12464 exitstatus = number(argv[1]);
12465 raise_exception(EXEXIT);
12470 * Read a file containing shell functions.
12473 readcmdfile(char *name)
12475 setinputfile(name, INPUT_PUSH_FILE);
12481 /* ============ find_command inplementation */
12484 * Resolve a command name. If you change this routine, you may have to
12485 * change the shellexec routine as well.
12488 find_command(char *name, struct cmdentry *entry, int act, const char *path)
12490 struct tblentry *cmdp;
12497 struct builtincmd *bcmd;
12499 /* If name contains a slash, don't use PATH or hash table */
12500 if (strchr(name, '/') != NULL) {
12501 entry->u.index = -1;
12502 if (act & DO_ABS) {
12503 while (stat(name, &statb) < 0) {
12505 if (errno == EINTR)
12508 entry->cmdtype = CMDUNKNOWN;
12512 entry->cmdtype = CMDNORMAL;
12516 /* #if ENABLE_FEATURE_SH_STANDALONE... moved after builtin check */
12518 updatetbl = (path == pathval());
12521 if (strstr(path, "%builtin") != NULL)
12522 act |= DO_ALTBLTIN;
12525 /* If name is in the table, check answer will be ok */
12526 cmdp = cmdlookup(name, 0);
12527 if (cmdp != NULL) {
12530 switch (cmdp->cmdtype) {
12548 } else if (cmdp->rehash == 0)
12549 /* if not invalidated by cd, we're done */
12553 /* If %builtin not in path, check for builtin next */
12554 bcmd = find_builtin(name);
12556 if (IS_BUILTIN_REGULAR(bcmd))
12557 goto builtin_success;
12558 if (act & DO_ALTPATH) {
12559 if (!(act & DO_ALTBLTIN))
12560 goto builtin_success;
12561 } else if (builtinloc <= 0) {
12562 goto builtin_success;
12566 #if ENABLE_FEATURE_SH_STANDALONE
12568 int applet_no = find_applet_by_name(name);
12569 if (applet_no >= 0) {
12570 entry->cmdtype = CMDNORMAL;
12571 entry->u.index = -2 - applet_no;
12577 /* We have to search path. */
12578 prev = -1; /* where to start */
12579 if (cmdp && cmdp->rehash) { /* doing a rehash */
12580 if (cmdp->cmdtype == CMDBUILTIN)
12583 prev = cmdp->param.index;
12589 while ((fullname = path_advance(&path, name)) != NULL) {
12590 stunalloc(fullname);
12591 /* NB: code below will still use fullname
12592 * despite it being "unallocated" */
12595 if (prefix(pathopt, "builtin")) {
12597 goto builtin_success;
12600 if ((act & DO_NOFUNC)
12601 || !prefix(pathopt, "func")
12602 ) { /* ignore unimplemented options */
12606 /* if rehash, don't redo absolute path names */
12607 if (fullname[0] == '/' && idx <= prev) {
12610 TRACE(("searchexec \"%s\": no change\n", name));
12613 while (stat(fullname, &statb) < 0) {
12615 if (errno == EINTR)
12618 if (errno != ENOENT && errno != ENOTDIR)
12622 e = EACCES; /* if we fail, this will be the error */
12623 if (!S_ISREG(statb.st_mode))
12625 if (pathopt) { /* this is a %func directory */
12626 stalloc(strlen(fullname) + 1);
12627 /* NB: stalloc will return space pointed by fullname
12628 * (because we don't have any intervening allocations
12629 * between stunalloc above and this stalloc) */
12630 readcmdfile(fullname);
12631 cmdp = cmdlookup(name, 0);
12632 if (cmdp == NULL || cmdp->cmdtype != CMDFUNCTION)
12633 ash_msg_and_raise_error("%s not defined in %s", name, fullname);
12634 stunalloc(fullname);
12637 TRACE(("searchexec \"%s\" returns \"%s\"\n", name, fullname));
12639 entry->cmdtype = CMDNORMAL;
12640 entry->u.index = idx;
12644 cmdp = cmdlookup(name, 1);
12645 cmdp->cmdtype = CMDNORMAL;
12646 cmdp->param.index = idx;
12651 /* We failed. If there was an entry for this command, delete it */
12652 if (cmdp && updatetbl)
12653 delete_cmd_entry();
12655 ash_msg("%s: %s", name, errmsg(e, "not found"));
12656 entry->cmdtype = CMDUNKNOWN;
12661 entry->cmdtype = CMDBUILTIN;
12662 entry->u.cmd = bcmd;
12666 cmdp = cmdlookup(name, 1);
12667 cmdp->cmdtype = CMDBUILTIN;
12668 cmdp->param.cmd = bcmd;
12672 entry->cmdtype = cmdp->cmdtype;
12673 entry->u = cmdp->param;
12677 /* ============ trap.c */
12680 * The trap builtin.
12682 static int FAST_FUNC
12683 trapcmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
12687 int signo, exitcode;
12692 for (signo = 0; signo < NSIG; signo++) {
12693 char *tr = trap_ptr[signo];
12695 /* note: bash adds "SIG", but only if invoked
12696 * as "bash". If called as "sh", or if set -o posix,
12697 * then it prints short signal names.
12698 * We are printing short names: */
12699 out1fmt("trap -- %s %s\n",
12701 get_signame(signo));
12702 /* trap_ptr != trap only if we are in special-cased `trap` code.
12703 * In this case, we will exit very soon, no need to free(). */
12704 /* if (trap_ptr != trap && tp[0]) */
12709 if (trap_ptr != trap) {
12722 signo = get_signum(*ap);
12724 /* Mimic bash message exactly */
12725 ash_msg("%s: invalid signal specification", *ap);
12731 if (LONE_DASH(action))
12734 action = ckstrdup(action);
12738 may_have_traps = 1;
12739 trap[signo] = action;
12750 /* ============ Builtins */
12752 #if ENABLE_ASH_HELP
12753 static int FAST_FUNC
12754 helpcmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
12760 "Built-in commands:\n"
12761 "------------------\n");
12762 for (col = 0, i = 0; i < ARRAY_SIZE(builtintab); i++) {
12763 col += out1fmt("%c%s", ((col == 0) ? '\t' : ' '),
12764 builtintab[i].name + 1);
12770 # if ENABLE_FEATURE_SH_STANDALONE
12772 const char *a = applet_names;
12774 col += out1fmt("%c%s", ((col == 0) ? '\t' : ' '), a);
12779 while (*a++ != '\0')
12785 return EXIT_SUCCESS;
12790 static int FAST_FUNC
12791 historycmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
12793 show_history(line_input_state);
12794 return EXIT_SUCCESS;
12799 * The export and readonly commands.
12801 static int FAST_FUNC
12802 exportcmd(int argc UNUSED_PARAM, char **argv)
12812 /* "readonly" in bash accepts, but ignores -n.
12813 * We do the same: it saves a conditional in nextopt's param.
12816 while ((opt = nextopt("np")) != '\0') {
12818 flag_off = VEXPORT;
12821 if (argv[0][0] == 'r') {
12823 flag_off = 0; /* readonly ignores -n */
12825 flag_off = ~flag_off;
12827 /*if (opt_p_not_specified) - bash doesnt check this. Try "export -p NAME" */
12833 p = strchr(name, '=');
12837 vp = *findvar(hashvar(name), name);
12839 vp->flags = ((vp->flags | flag) & flag_off);
12843 setvar(name, p, (flag & flag_off));
12844 } while ((name = *++aptr) != NULL);
12849 /* No arguments. Show the list of exported or readonly vars.
12852 showvars(argv[0], flag, 0);
12857 * Delete a function if it exists.
12860 unsetfunc(const char *name)
12862 struct tblentry *cmdp;
12864 cmdp = cmdlookup(name, 0);
12865 if (cmdp != NULL && cmdp->cmdtype == CMDFUNCTION)
12866 delete_cmd_entry();
12870 * The unset builtin command. We unset the function before we unset the
12871 * variable to allow a function to be unset when there is a readonly variable
12872 * with the same name.
12874 static int FAST_FUNC
12875 unsetcmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
12882 while ((i = nextopt("vf")) != 0) {
12886 for (ap = argptr; *ap; ap++) {
12899 static const unsigned char timescmd_str[] ALIGN1 = {
12900 ' ', offsetof(struct tms, tms_utime),
12901 '\n', offsetof(struct tms, tms_stime),
12902 ' ', offsetof(struct tms, tms_cutime),
12903 '\n', offsetof(struct tms, tms_cstime),
12906 static int FAST_FUNC
12907 timescmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
12909 unsigned long clk_tck, s, t;
12910 const unsigned char *p;
12913 clk_tck = bb_clk_tck();
12918 t = *(clock_t *)(((char *) &buf) + p[1]);
12921 out1fmt("%lum%lu.%03lus%c",
12923 (t * 1000) / clk_tck,
12931 #if ENABLE_SH_MATH_SUPPORT
12933 * The let builtin. Partially stolen from GNU Bash, the Bourne Again SHell.
12934 * Copyright (C) 1987, 1989, 1991 Free Software Foundation, Inc.
12936 * Copyright (C) 2003 Vladimir Oleynik <dzo@simtreas.ru>
12938 static int FAST_FUNC
12939 letcmd(int argc UNUSED_PARAM, char **argv)
12945 ash_msg_and_raise_error("expression expected");
12947 i = ash_arith(*argv);
12955 * The read builtin. Options:
12956 * -r Do not interpret '\' specially
12957 * -s Turn off echo (tty only)
12958 * -n NCHARS Read NCHARS max
12959 * -p PROMPT Display PROMPT on stderr (if input is from tty)
12960 * -t SECONDS Timeout after SECONDS (tty or pipe only)
12961 * -u FD Read from given FD instead of fd 0
12962 * This uses unbuffered input, which may be avoidable in some cases.
12963 * TODO: bash also has:
12964 * -a ARRAY Read into array[0],[1],etc
12965 * -d DELIM End on DELIM char, not newline
12966 * -e Use line editing (tty only)
12968 static int FAST_FUNC
12969 readcmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
12971 char *opt_n = NULL;
12972 char *opt_p = NULL;
12973 char *opt_t = NULL;
12974 char *opt_u = NULL;
12975 int read_flags = 0;
12979 while ((i = nextopt("p:u:rt:n:s")) != '\0') {
12988 read_flags |= BUILTIN_READ_SILENT;
12994 read_flags |= BUILTIN_READ_RAW;
13004 /* "read -s" needs to save/restore termios, can't allow ^C
13005 * to jump out of it.
13008 r = shell_builtin_read(setvar0,
13010 bltinlookup("IFS"), /* can be NULL */
13019 if ((uintptr_t)r > 1)
13020 ash_msg_and_raise_error(r);
13022 return (uintptr_t)r;
13025 static int FAST_FUNC
13026 umaskcmd(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
13028 static const char permuser[3] ALIGN1 = "ogu";
13031 int symbolic_mode = 0;
13033 while (nextopt("S") != '\0') {
13042 if (*argptr == NULL) {
13043 if (symbolic_mode) {
13044 char buf[sizeof(",u=rwx,g=rwx,o=rwx")];
13051 *p++ = permuser[i];
13053 /* mask is 0..0uuugggooo. i=2 selects uuu bits */
13054 if (!(mask & 0400)) *p++ = 'r';
13055 if (!(mask & 0200)) *p++ = 'w';
13056 if (!(mask & 0100)) *p++ = 'x';
13064 out1fmt("%04o\n", mask);
13067 char *modestr = *argptr;
13068 /* numeric umasks are taken as-is */
13069 /* symbolic umasks are inverted: "umask a=rx" calls umask(222) */
13070 if (!isdigit(modestr[0]))
13072 mask = bb_parse_mode(modestr, mask);
13073 if ((unsigned)mask > 0777) {
13074 ash_msg_and_raise_error("illegal mode: %s", modestr);
13076 if (!isdigit(modestr[0]))
13083 static int FAST_FUNC
13084 ulimitcmd(int argc UNUSED_PARAM, char **argv)
13086 return shell_builtin_ulimit(argv);
13089 /* ============ main() and helpers */
13092 * Called to exit the shell.
13101 #if ENABLE_FEATURE_EDITING_SAVE_ON_EXIT
13102 save_history(line_input_state);
13105 status = exitstatus;
13106 TRACE(("pid %d, exitshell(%d)\n", getpid(), status));
13107 if (setjmp(loc.loc)) {
13108 if (exception_type == EXEXIT)
13109 /* dash bug: it just does _exit(exitstatus) here
13110 * but we have to do setjobctl(0) first!
13111 * (bug is still not fixed in dash-0.5.3 - if you run dash
13112 * under Midnight Commander, on exit from dash MC is backgrounded) */
13113 status = exitstatus;
13116 exception_handler = &loc;
13124 flush_stdout_stderr();
13134 /* from input.c: */
13135 /* we will never free this */
13136 basepf.next_to_pgetc = basepf.buf = ckmalloc(IBUFSIZ);
13139 signal(SIGCHLD, SIG_DFL);
13140 /* bash re-enables SIGHUP which is SIG_IGNed on entry.
13141 * Try: "trap '' HUP; bash; echo RET" and type "kill -HUP $$"
13143 signal(SIGHUP, SIG_DFL);
13149 struct stat st1, st2;
13152 for (envp = environ; envp && *envp; envp++) {
13153 p = endofname(*envp);
13154 if (p != *envp && *p == '=') {
13155 setvareq(*envp, VEXPORT|VTEXTFIXED);
13159 setvareq((char*)defoptindvar, VTEXTFIXED);
13161 setvar0("PPID", utoa(getppid()));
13162 #if ENABLE_ASH_BASH_COMPAT
13163 p = lookupvar("SHLVL");
13164 setvar("SHLVL", utoa((p ? atoi(p) : 0) + 1), VEXPORT);
13165 if (!lookupvar("HOSTNAME")) {
13166 struct utsname uts;
13168 setvar0("HOSTNAME", uts.nodename);
13171 p = lookupvar("PWD");
13173 if (p[0] != '/' || stat(p, &st1) || stat(".", &st2)
13174 || st1.st_dev != st2.st_dev || st1.st_ino != st2.st_ino
13184 //usage:#define ash_trivial_usage
13185 //usage: "[-/+OPTIONS] [-/+o OPT]... [-c 'SCRIPT' [ARG0 [ARGS]] / FILE [ARGS]]"
13186 //usage:#define ash_full_usage "\n\n"
13187 //usage: "Unix shell interpreter"
13189 //usage:#if ENABLE_FEATURE_SH_IS_ASH
13190 //usage:# define sh_trivial_usage ash_trivial_usage
13191 //usage:# define sh_full_usage ash_full_usage
13193 //usage:#if ENABLE_FEATURE_BASH_IS_ASH
13194 //usage:# define bash_trivial_usage ash_trivial_usage
13195 //usage:# define bash_full_usage ash_full_usage
13199 * Process the shell command line arguments.
13202 procargs(char **argv)
13205 const char *xminusc;
13210 /* if (xargv[0]) - mmm, this is always true! */
13212 for (i = 0; i < NOPTS; i++)
13215 if (options(/*cmdline:*/ 1)) {
13216 /* it already printed err message */
13217 raise_exception(EXERROR);
13221 if (*xargv == NULL) {
13223 ash_msg_and_raise_error(bb_msg_requires_arg, "-c");
13226 if (iflag == 2 && sflag == 1 && isatty(0) && isatty(1))
13230 for (i = 0; i < NOPTS; i++)
13231 if (optlist[i] == 2)
13236 /* POSIX 1003.2: first arg after -c cmd is $0, remainder $1... */
13241 } else if (!sflag) {
13242 setinputfile(*xargv, 0);
13245 commandname = arg0;
13248 shellparam.p = xargv;
13249 #if ENABLE_ASH_GETOPTS
13250 shellparam.optind = 1;
13251 shellparam.optoff = -1;
13253 /* assert(shellparam.malloced == 0 && shellparam.nparam == 0); */
13255 shellparam.nparam++;
13262 * Read /etc/profile or .profile.
13265 read_profile(const char *name)
13267 if (setinputfile(name, INPUT_PUSH_FILE | INPUT_NOFILE_OK) < 0)
13274 * This routine is called when an error or an interrupt occurs in an
13275 * interactive shell and control is returned to the main command loop.
13283 /* from input.c: */
13284 g_parsefile->left_in_buffer = 0;
13285 g_parsefile->left_in_line = 0; /* clear input buffer */
13287 /* from parser.c: */
13290 /* from redir.c: */
13291 clearredir(/*drop:*/ 0);
13295 static short profile_buf[16384];
13296 extern int etext();
13300 * Main routine. We initialize things, parse the arguments, execute
13301 * profiles if we're a login shell, and then call cmdloop to execute
13302 * commands. The setjmp call sets up the location to jump to when an
13303 * exception occurs. When an exception occurs the variable "state"
13304 * is used to figure out how far we had gotten.
13306 int ash_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
13307 int ash_main(int argc UNUSED_PARAM, char **argv)
13309 const char *shinit;
13310 volatile smallint state;
13311 struct jmploc jmploc;
13312 struct stackmark smark;
13314 /* Initialize global data */
13318 #if ENABLE_ASH_ALIAS
13324 monitor(4, etext, profile_buf, sizeof(profile_buf), 50);
13327 #if ENABLE_FEATURE_EDITING
13328 line_input_state = new_line_input_t(FOR_SHELL | WITH_PATH_LOOKUP);
13331 if (setjmp(jmploc.loc)) {
13337 e = exception_type;
13341 if (e == EXEXIT || s == 0 || iflag == 0 || shlvl) {
13345 newline_and_flush(stderr);
13348 popstackmark(&smark);
13349 FORCE_INT_ON; /* enable interrupts */
13358 exception_handler = &jmploc;
13361 TRACE(("Shell args: "));
13362 trace_puts_args(argv);
13364 rootpid = getpid();
13367 setstackmark(&smark);
13370 if (argv[0] && argv[0][0] == '-')
13376 read_profile("/etc/profile");
13379 hp = lookupvar("HOME");
13381 hp = concat_path_file(hp, ".profile");
13390 getuid() == geteuid() && getgid() == getegid() &&
13394 shinit = lookupvar("ENV");
13395 if (shinit != NULL && *shinit != '\0') {
13396 read_profile(shinit);
13402 /* evalstring pushes parsefile stack.
13403 * Ensure we don't falsely claim that 0 (stdin)
13404 * is one of stacked source fds.
13405 * Testcase: ash -c 'exec 1>&0' must not complain. */
13406 // if (!sflag) g_parsefile->pf_fd = -1;
13407 // ^^ not necessary since now we special-case fd 0
13408 // in is_hidden_fd() to not be considered "hidden fd"
13409 evalstring(minusc, 0);
13412 if (sflag || minusc == NULL) {
13413 #if MAX_HISTORY > 0 && ENABLE_FEATURE_EDITING_SAVEHISTORY
13415 const char *hp = lookupvar("HISTFILE");
13417 hp = lookupvar("HOME");
13419 hp = concat_path_file(hp, ".ash_history");
13420 setvar0("HISTFILE", hp);
13422 hp = lookupvar("HISTFILE");
13426 line_input_state->hist_file = hp;
13427 # if ENABLE_FEATURE_SH_HISTFILESIZE
13428 hp = lookupvar("HISTFILESIZE");
13429 line_input_state->max_history = size_from_HISTFILESIZE(hp);
13433 state4: /* XXX ??? - why isn't this before the "if" statement */
13441 extern void _mcleanup(void);
13445 TRACE(("End of main reached\n"));
13452 * Copyright (c) 1989, 1991, 1993, 1994
13453 * The Regents of the University of California. All rights reserved.
13455 * This code is derived from software contributed to Berkeley by
13456 * Kenneth Almquist.
13458 * Redistribution and use in source and binary forms, with or without
13459 * modification, are permitted provided that the following conditions
13461 * 1. Redistributions of source code must retain the above copyright
13462 * notice, this list of conditions and the following disclaimer.
13463 * 2. Redistributions in binary form must reproduce the above copyright
13464 * notice, this list of conditions and the following disclaimer in the
13465 * documentation and/or other materials provided with the distribution.
13466 * 3. Neither the name of the University nor the names of its contributors
13467 * may be used to endorse or promote products derived from this software
13468 * without specific prior written permission.
13470 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
13471 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
13472 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
13473 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
13474 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
13475 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
13476 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
13477 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
13478 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
13479 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF