3 "Project-Id-Version: PACKAGE VERSION\n"
4 "Report-Msgid-Bugs-To: \n"
5 "POT-Creation-Date: 2010-03-30 17:00+0200\n"
6 "PO-Revision-Date: 2012-02-25 08:06+0200\n"
7 "Last-Translator: Cye3s <cye3s.cy@gmail.com>\n"
8 "Language-Team: QQ Group 75543259 <axishero@foxmail.com>\n"
10 "Content-Type: text/plain; charset=UTF-8\n"
11 "Content-Transfer-Encoding: 8bit\n"
13 "Plural-Forms: nplurals=1; plural=0;\n"
14 "X-Generator: Pootle 2.0.4\n"
19 msgid "(Unnamed Entry)"
22 msgid "(Unnamed Rule)"
25 msgid "(Unnamed SNAT)"
28 msgid "-- Please choose --"
34 msgid "<var>%d</var> pkts. per <var>%s</var>"
37 msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
40 msgid "<var>%s</var> and limit to %s"
49 msgid "Add and edit..."
52 msgid "Advanced Settings"
55 msgid "Allow forward from <em>source zones</em>:"
56 msgstr "允许从<em>source zones</em>转发"
58 msgid "Allow forward to <em>destination zones</em>:"
59 msgstr "允许转发到<em>source zones</em>"
64 msgid "Covered networks"
71 "Custom rules allow you to execute arbritary iptables commands which are not "
72 "otherwise covered by the firewall framework. The commands are executed after "
73 "each firewall restart, right after the default ruleset has been loaded."
79 msgid "Destination IP address"
82 msgid "Destination address"
85 msgid "Destination port"
88 msgid "Destination zone"
91 msgid "Do not rewrite"
94 msgid "Drop invalid packets"
100 msgid "Enable NAT Loopback"
103 msgid "Enable SYN-flood protection"
104 msgstr "启用SYN-flood防御"
106 msgid "Enable logging on this zone"
109 msgid "External IP address"
112 msgid "External port"
115 msgid "Extra arguments"
124 msgid "Firewall - Custom Rules"
127 msgid "Firewall - Port Forwards"
130 msgid "Firewall - Traffic Rules"
133 msgid "Firewall - Zone Settings"
136 msgid "Force connection tracking"
142 msgid "Forward to %s in %s"
143 msgstr "转发到 %s 位于 %s"
145 msgid "Forward to %s, %s in %s"
146 msgstr "转发到 %s, %s 位于 %s"
148 msgid "From %s in %s"
151 msgid "From %s in %s with source %s"
152 msgstr "来自 %s 位于 %s 带源 %s"
154 msgid "From %s in %s with source %s and %s"
155 msgstr "来自 %s 位于 %s 带源 %s 并且 %s"
157 msgid "General Settings"
163 msgid "IPv4 and IPv6"
178 msgid "Inter-Zone Forwarding"
181 msgid "Internal IP address"
184 msgid "Internal port"
187 msgid "Internal zone"
190 msgid "Limit log messages"
199 msgid "Match ICMP type"
202 msgid "Match forwarded traffic to the given destination port or port range."
206 "Match incoming traffic directed at the given destination port or port range "
208 msgstr "在这个主机上,匹配输入的信息指向给定的端口或者范围"
211 "Match incoming traffic originating from the given source port or port range "
212 "on the client host."
218 msgid "New SNAT rule"
221 msgid "New forward rule"
224 msgid "New input rule"
227 msgid "New port forward"
230 msgid "New source NAT"
233 msgid "Only match incoming traffic directed at the given IP address."
236 msgid "Only match incoming traffic from these MACs."
239 msgid "Only match incoming traffic from this IP or range."
243 "Only match incoming traffic originating from the given source port or port "
244 "range on the client host"
247 msgid "Open ports on router"
256 msgid "Passes additional arguments to iptables. Use with care!"
259 msgid "Port Forwards"
263 "Port forwarding allows remote computers on the Internet to connect to a "
264 "specific computer or service within the private LAN."
271 "Redirect matched incoming traffic to the given port on the internal host"
272 msgstr "重定向匹配到的入站流量至内部主机的指定端口"
274 msgid "Redirect matched incoming traffic to the specified internal host"
275 msgstr "重定向匹配到的入站流量至选定的内部主机"
277 msgid "Restrict Masquerading to given destination subnets"
280 msgid "Restrict Masquerading to given source subnets"
283 msgid "Restrict to address family"
286 msgid "Rewrite matched traffic to the given address."
290 "Rewrite matched traffic to the given source port. May be left empty to only "
291 "rewrite the IP address."
294 msgid "Rewrite to source %s"
297 msgid "Rewrite to source %s, %s"
303 msgid "SNAT IP address"
312 # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
313 # Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua #
314 # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
316 # msgid "Traffic Redirection"
320 # "Traffic redirection allows you to change the destination address of "
321 # "forwarded packets."
330 # msgid "Source zone"
333 # msgid "Source MAC-address"
336 # msgid "Source port"
342 msgid "Source IP address"
345 msgid "Source MAC address"
352 "Source NAT is a specific form of masquerading which allows fine grained "
353 "control over the source IP used for outgoing traffic, for example to map "
354 "multiple WAN addresses to internal subnets."
357 msgid "Source address"
367 "The firewall creates zones over your network interfaces to control network "
369 msgstr "防火墙把网络接口分为不同的区域进行管理"
372 "The options below control the forwarding policies between this zone (%s) and "
373 "other zones. <em>Destination zones</em> cover forwarded traffic "
374 "<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
375 "traffic from other zones <strong>targeted at %q</strong>. The forwarding "
376 "rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
377 "<em>not</em> imply a permission to forward from wan to lan as well."
378 msgstr "这个属性用来控制区域对区域的转发规则。"
381 "This page allows you to change advanced properties of the port forwarding "
382 "entry. In most cases there is no need to modify those settings."
386 "This page allows you to change advanced properties of the traffic rule "
387 "entry, such as matched source and destination hosts."
391 "This section defines common properties of %q. The <em>input</em> and "
392 "<em>output</em> options set the default policies for traffic entering and "
393 "leaving this zone while the <em>forward</em> option describes the policy for "
394 "forwarded traffic between different networks within the zone. <em>Covered "
395 "networks</em> specifies which available networks are member of this zone."
397 "本节定义 %q 的通用属性, <em>input</em> 和 <em>output</em>规则用于设置数据"
398 "包“进”和“出”路由器(某个接口)默认的转发原则,<em>forward</em>规则用于特定"
399 "(一个或多个)区域的不同子网之间的数据包转发而<em>Covered networks</em>是从属"
408 msgid "To %s at %s on <var>this device</var>"
414 msgid "To %s on <var>this device</var>"
417 msgid "To %s, %s in %s"
423 msgid "To source port"
426 msgid "Traffic Rules"
430 "Traffic rules define policies for packets traveling between different zones, "
431 "for example to reject traffic between certain hosts or to open WAN ports on "
439 "You may specify multiple by selecting \"-- custom --\" and then entering "
440 "protocols separated by space."
446 msgid "Zone ⇒ Forwardings"
461 msgid "any router IP"
479 #~ msgid "Do not track forward"
482 #~ msgid "Do not track input"
491 #~ msgid "(optional)"
494 #~ msgid "Intended destination address"
497 #~ msgid "Internal port (optional)"
500 #~ msgid "Advanced Options"
503 #~ msgid "Advanced Rules"
507 #~ "Advanced rules let you customize the firewall to your needs. Only new "
508 #~ "connections will be matched. Packets belonging to already open "
509 #~ "connections are automatically allowed to pass the firewall."
511 #~ "高级规则允许按需定制防火墙。此规则只限制新建立的连接,对于已建立链路的数据"
514 #~ msgid "Custom Rules (/etc/firewall.user)"
515 #~ msgstr "自定义规则(/etc/firewall.user)"
521 #~ "For DNAT, match incoming traffic directed at the given destination ip "
522 #~ "address. For SNAT rewrite the source address to the given address."
524 #~ "DNAT:将目标地址转换为指定的IP地址;SNAT:将源地址转换为指定的IP地址。"
527 #~ "Match incoming traffic originating from the given source port or port "
528 #~ "range on the client host"
529 #~ msgstr "在客户端上,比较输入通道与给定的源端口是否一致。"
534 #~ msgid "Port forwarding"
538 #~ "Port forwarding allows to provide network services in the internal "
539 #~ "network to an external network."
540 #~ msgstr "端口转发-允许外部网络访问内部网络"
542 #~ msgid "Redirection type"
545 #~ msgid "Redirections"
551 #~ msgid "Traffic Redirection"
555 #~ "Traffic redirection allows you to change the destination address of "
556 #~ "forwarded packets."
557 #~ msgstr "流量重定向允许你修改数据包转发地址"