2 # generated from ./applications/luci-olsr/luasrc/i18n/olsr.en.lua
5 "Project-Id-Version: PACKAGE VERSION\n"
6 "Report-Msgid-Bugs-To: \n"
7 "POT-Creation-Date: 2009-08-16 06:58+0200\n"
8 "PO-Revision-Date: 2009-08-16 12:39+0200\n"
9 "Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
10 "Language-Team: LANGUAGE <LL@li.org>\n"
13 "Content-Type: text/plain; charset=UTF-8\n"
14 "Content-Transfer-Encoding: 8bit\n"
15 "X-Generator: Pootle 1.1.0\n"
17 msgid "Active MID announcements"
18 msgstr "Thông báo của các MID đang hoạt động"
20 msgid "Active OLSR nodes"
21 msgstr "Những OLSR nodes đang hoạt động"
23 msgid "Active host net announcements"
24 msgstr "Thông báo của mạng host đang hoạt động"
26 msgid "Advanced Settings"
29 msgid "Announced network"
30 msgstr "Mạng lưới thông báo"
32 msgid "Broadcast address"
47 msgid "Download Config"
56 msgid "Enable this interface."
62 msgid "Expected retransmission count"
63 msgstr "Expected retransmission count"
69 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
70 "means that the metric value is always 2. This is the preferred value because "
71 "it helps the linux kernel routing to clean up older routes. \"correct\" uses "
72 "the hopcount as the metric value. \"approx\" use the hopcount as the metric "
73 "value too, but does only update the hopcount if the nexthop changes too. "
74 "Default is \"flat\"."
77 msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
83 msgid "General Settings"
86 msgid "General settings"
87 msgstr "Cài đặt tổng quát"
92 msgid "HNA Announcements"
98 msgid "HNA validity time"
99 msgstr "Thời gian hợp lệ hóa HNA "
104 msgid "Hello interval"
105 msgstr "Vùng xin chào"
107 msgid "Hello validity time"
108 msgstr "Thời gian hợp lệ hóa lời chào"
117 "Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
118 "robustness to the link sensing but delays neighbor registration. Defaults is "
126 "IP-version to use. If 6and4 is selected then one olsrd instance is started "
133 msgid "IPv4 broadcast"
134 msgstr "IPv4 broadcast"
137 "IPv4 broadcast address for outgoing OLSR packets. One useful example would "
138 "be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
139 "interface broadcast IP."
146 "IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
147 "triggers usage of the interface IP."
153 msgid "IPv6 multicast"
157 "IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
165 "IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
166 "the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
167 "of a not-linklocal interface IP."
171 "If the route to the current gateway is to be changed, the ETX value of this "
172 "gateway is multiplied with this value before it is compared to the new one. "
173 "The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
174 "if changed.<br /><b>WARNING:</b> This parameter should not be used together "
175 "with the etx_ffeth metric!<br />Defaults to \"1.0\"."
182 "Interface Mode is used to prevent unnecessary packet forwarding on switched "
183 "ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
190 msgid "Interfaces Defaults"
193 msgid "Internet protocol"
194 msgstr "Internet protocol"
197 "Interval to poll network interfaces for configuration changes (in seconds). "
198 "Default is \"2.5\"."
201 msgid "Known OLSR routes"
202 msgstr "Tuyến OLRS đã biết"
208 msgstr "LQ algorithm"
225 msgid "Link Quality Settings"
229 "Link quality aging factor (only for lq level 2). Tuning parameter for "
230 "etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
231 "(allowed values are between 0.01 and 1.0)"
235 "Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
236 "floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
237 "ext_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
238 "etx variant which use all OLSR traffic (instead of only hellos) for ETX "
239 "calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
240 "allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
244 "Link quality level switch between hopcount and cost-based (mostly ETX) "
245 "routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
246 "quality for MPR selection and routing<br />Default is \"2\""
249 msgid "LinkQuality Multiplicator"
252 msgid "Links per node (average)"
258 msgid "Local interface IP"
259 msgstr "Giao diện địa phương IP"
267 msgid "MID validity time"
268 msgstr "Thời gian hợp lệ hóa MID"
277 "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
278 "configured on port 2006 and accepts connections from \"127.0.0.1\"."
280 "Bảo đảm là OLSRd đang vận hành, the &quot;txtinfo&quot; plugin được "
281 "tải, định cấu hình trên cổng 2006 và chấp nhận kết nối từ &"
282 "quot;127.0.0.1&quot;."
291 "Multiply routes with the factor given here. Allowed values are between 0.01 "
292 "and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
293 ">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
294 "nodes on this interface by 20%: default 0.8"
297 msgid "NAT threshold"
315 msgid "Network address"
318 msgid "Nic changes poll interval"
327 msgid "OLSR - Display Options"
330 msgid "OLSR - HNA-Announcements"
331 msgstr "OLSR - HNA - Thông báo"
333 msgid "OLSR - Plugins"
334 msgstr "OLSR - Plugins"
339 msgid "OLSR Daemon - Interface"
342 msgid "OLSR connections"
343 msgstr "Kết nối OLSR"
354 msgid "Overview of currently active OLSR host net announcements"
355 msgstr "Tổng quát về các thông báo của mạng host đang hoạt động"
357 msgid "Overview of currently established OLSR connections"
358 msgstr "Tổng quát về kết nối OLSR hiện tại "
360 msgid "Overview of currently known OLSR nodes"
361 msgstr "Tổng quát của các OLSR nodes đã biết hiện tại"
363 msgid "Overview of currently known routes to other OLSR nodes"
364 msgstr "Tổng quát của các tuyến đã biết hiện tại tới những OLSR nodes khác"
366 msgid "Overview of interfaces where OLSR is running"
369 msgid "Overview of known multiple interface announcements"
370 msgstr "Tổng quát về thông báo của nhiều giao diện đã biết"
372 msgid "Overview of smart gateways in this network"
375 msgid "Plugin configuration"
376 msgstr "Cấu hình Plugin"
381 msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
397 "Resolve hostnames on status pages. It is generally safe to allow this, but "
398 "if you use public IPs and have unstable DNS-Setup then those pages will load "
399 "really slow. In this case disable it here."
408 msgid "Secondary OLSR interfaces"
409 msgstr "Giao diện OLSR thứ nhì"
412 "Sets the main IP (originator ip) of the router. This IP will NEVER change "
413 "during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
414 "IP of the first interface."
420 msgid "SmartGW announcements"
423 msgid "SmartGateway is not configured on this system."
426 msgid "Source address"
435 msgid "Success rate of packages received from the neighbour"
438 msgid "Success rate of packages sent to the neighbour"
447 msgid "TC validity time"
448 msgstr "Thời gian hợp lệ hóa TC"
454 "The OLSR daemon is an implementation of the Optimized Link State Routing "
455 "protocol. As such it allows mesh routing for any network equipment. It runs "
456 "on any wifi card that supports ad-hoc mode and of course on any ethernet "
457 "device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
462 "The fixed willingness to use. If not set willingness will be calculated "
463 "dynamically based on battery/power status. Default is \"3\"."
466 msgid "The interface OLSRd should serve."
470 "The port OLSR uses. This should usually stay at the IANA assigned port 698. "
471 "It can have a value between 1 and 65535."
474 msgid "Timing and Validity"
484 "Type of service value for the IP header of control traffic. Default is "
488 msgid "Unable to connect to the OLSR daemon!"
489 msgstr "Không thể kết nối với OLSR daemon!"
494 msgid "Use hysteresis"
495 msgstr "Dùng hysteresis"
507 "When multiple links exist between hosts the weight of interface is used to "
508 "determine the link to use. Normally the weight is automatically calculated "
509 "by olsrd based on the characteristics of the interface, but here you can "
510 "specify a fixed value. Olsrd will choose links with the lowest value.<br /"
511 "><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
512 "0. For any other value of LinkQualityLevel, the interface ETX value is used "