3 "Project-Id-Version: PACKAGE VERSION\n"
4 "Report-Msgid-Bugs-To: \n"
5 "POT-Creation-Date: 2009-06-10 03:41+0200\n"
6 "PO-Revision-Date: 2012-08-19 17:02+0200\n"
7 "Last-Translator: josevteg <josevteg@gmail.com>\n"
8 "Language-Team: LANGUAGE <LL@li.org>\n"
11 "Content-Type: text/plain; charset=UTF-8\n"
12 "Content-Transfer-Encoding: 8bit\n"
13 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
14 "X-Generator: Pootle 2.0.6\n"
16 msgid "Active MID announcements"
17 msgstr "Anuncios MID activos"
19 msgid "Active OLSR nodes"
20 msgstr "Nodos OLSR activos"
22 msgid "Active host net announcements"
23 msgstr "Anuncios activos del host de red"
25 msgid "Advanced Settings"
28 msgid "Allow gateways with NAT"
31 msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
34 msgid "Announce uplink"
37 msgid "Announced network"
38 msgstr "Red a anunciar"
40 msgid "Both values must use the dotted decimal notation."
43 msgid "Broadcast address"
58 msgid "Download Config"
68 "Enable SmartGateway. If it is disabled, then all other SmartGateway "
69 "parameters are ignored. Default is \"no\"."
72 msgid "Enable this interface."
78 msgid "Expected retransmission count"
79 msgstr "Contador de retransmisión esperado"
85 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
86 "means that the metric value is always 2. This is the preferred value because "
87 "it helps the linux kernel routing to clean up older routes. \"correct\" uses "
88 "the hopcount as the metric value. \"approx\" use the hopcount as the metric "
89 "value too, but does only update the hopcount if the nexthop changes too. "
90 "Default is \"flat\"."
93 msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
99 msgid "General Settings"
102 msgid "General settings"
103 msgstr "Configuración general"
108 msgid "HNA Announcements"
112 msgstr "Intervalo HNA"
114 msgid "HNA validity time"
115 msgstr "Timpo de validez de HNA"
120 msgid "Hello interval"
121 msgstr "Intervalo de \"Hola\""
123 msgid "Hello validity time"
124 msgstr "Tiempo de validez de \"Hola\""
139 "Hosts in a OLSR routed network can announce connecitivity to external "
140 "networks using HNA messages."
144 "Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
145 "robustness to the link sensing but delays neighbor registration. Defaults is "
153 "IP-version to use. If 6and4 is selected then one olsrd instance is started "
160 msgid "IPv4 broadcast"
161 msgstr "Dirección de transmisión IPv4"
164 "IPv4 broadcast address for outgoing OLSR packets. One useful example would "
165 "be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
166 "interface broadcast IP."
173 "IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
174 "triggers usage of the interface IP."
180 msgid "IPv6 multicast"
184 "IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
189 "IPv6 network must be given in full notation, prefix must be in CIDR notation."
196 "IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
197 "the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
198 "of a not-linklocal interface IP."
201 msgid "IPv6-Prefix of the uplink"
205 "If the route to the current gateway is to be changed, the ETX value of this "
206 "gateway is multiplied with this value before it is compared to the new one. "
207 "The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
208 "if changed.<br /><b>WARNING:</b> This parameter should not be used together "
209 "with the etx_ffeth metric!<br />Defaults to \"1.0\"."
213 "If this Node uses NAT for connections to the internet. Default is \"yes\"."
220 "Interface Mode is used to prevent unnecessary packet forwarding on switched "
221 "ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
228 msgid "Interfaces Defaults"
231 msgid "Internet protocol"
232 msgstr "Protocolo de Internet"
235 "Interval to poll network interfaces for configuration changes (in seconds). "
236 "Default is \"2.5\"."
239 msgid "Known OLSR routes"
240 msgstr "Rutas OLSR conocidas"
249 msgstr "Algoritmo LQ"
252 msgstr "Ojo de pez LQ"
258 msgstr "Último salto"
266 msgid "Link Quality Settings"
270 "Link quality aging factor (only for lq level 2). Tuning parameter for "
271 "etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
272 "(allowed values are between 0.01 and 1.0)"
276 "Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
277 "floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
278 "etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
279 "etx variant which use all OLSR traffic (instead of only hellos) for ETX "
280 "calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
281 "allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
285 "Link quality level switch between hopcount and cost-based (mostly ETX) "
286 "routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
287 "quality for MPR selection and routing<br />Default is \"2\""
290 msgid "LinkQuality Multiplicator"
293 msgid "Links per node (average)"
299 msgid "Local interface IP"
300 msgstr "IP de la interfaz local"
306 msgstr "Intervalo de MID"
308 msgid "MID validity time"
309 msgstr "Tiempo de validez de MID"
318 "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
319 "configured on port 2006 and accepts connections from \"127.0.0.1\"."
321 "Asegúrese de que olsrd se está ejecutando, qué el plugin \"txtinfo\" esté "
322 "cargado, configurado en el puerto 2006, y acepta conexiones desde 127.0.0.1."
331 "Multiply routes with the factor given here. Allowed values are between 0.01 "
332 "and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
333 ">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
334 "nodes on this interface by 20%: default 0.8"
337 msgid "NAT threshold"
353 msgstr "Máscara de red"
358 msgid "Network address"
361 msgid "Nic changes poll interval"
370 msgid "OLSR - Display Options"
373 msgid "OLSR - HNA-Announcements"
374 msgstr "Anuncios HNA de OLSR"
376 msgid "OLSR - Plugins"
377 msgstr "Plugins OLSR"
380 msgstr "Demonio OLSR"
382 msgid "OLSR Daemon - Interface"
385 msgid "OLSR connections"
386 msgstr "Conexiones OLSR"
389 msgstr "Puerta de enlace OLSR"
397 msgid "Overview of currently active OLSR host net announcements"
398 msgstr "Listado de los anuncios activos actuales de host de red de OLSR"
400 msgid "Overview of currently established OLSR connections"
402 "Detalle general acerca de las conexiones de OLSR establecidas actualmente"
404 msgid "Overview of currently known OLSR nodes"
405 msgstr "Listado de nodos actualmente conocido OLSR"
407 msgid "Overview of currently known routes to other OLSR nodes"
408 msgstr "Listado de las rutas conocidas en la actualidad a otros nodos de OLSR"
410 msgid "Overview of interfaces where OLSR is running"
413 msgid "Overview of known multiple interface announcements"
414 msgstr "Listados múltiples de anuncios sobre las internfaces"
416 msgid "Overview of smart gateways in this network"
419 msgid "Plugin configuration"
420 msgstr "Configuración del plugin"
425 msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
429 msgstr "Tasa de sondeo"
441 "Resolve hostnames on status pages. It is generally safe to allow this, but "
442 "if you use public IPs and have unstable DNS-Setup then those pages will load "
443 "really slow. In this case disable it here."
449 msgid "Secondary OLSR interfaces"
450 msgstr "Interfaces OLSR secundarias"
453 "Sets the main IP (originator ip) of the router. This IP will NEVER change "
454 "during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
455 "IP of the first interface."
461 msgid "SmartGW announcements"
464 msgid "SmartGateway is not configured on this system."
467 msgid "Source address"
471 "Specifies the speed of the uplink in kilobits/s. First parameter is "
472 "upstream, second parameter is downstream. Default is \"128 1024\"."
475 msgid "Speed of the uplink"
484 msgid "Success rate of packages received from the neighbour"
487 msgid "Success rate of packages sent to the neighbour"
494 msgstr "Intervalo TC"
496 msgid "TC validity time"
497 msgstr "Timpo de validez de TC"
503 "The OLSR daemon is an implementation of the Optimized Link State Routing "
504 "protocol. As such it allows mesh routing for any network equipment. It runs "
505 "on any wifi card that supports ad-hoc mode and of course on any ethernet "
506 "device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
511 "The fixed willingness to use. If not set willingness will be calculated "
512 "dynamically based on battery/power status. Default is \"3\"."
515 msgid "The interface OLSRd should serve."
519 "The port OLSR uses. This should usually stay at the IANA assigned port 698. "
520 "It can have a value between 1 and 65535."
524 "This can be used to signal the external IPv6 prefix of the uplink to the "
525 "clients. This might allow a client to change it's local IPv6 address to use "
526 "the IPv6 gateway without any kind of address translation. The maximum prefix "
527 "length is 64 bits. Default is \"::/0\" (no prefix)."
530 msgid "Timing and Validity"
537 "Type of service value for the IP header of control traffic. Default is \"16"
541 msgid "Unable to connect to the OLSR daemon!"
542 msgstr "No es posible conectar con el demonio de OLSR!"
547 msgid "Uplink uses NAT"
550 msgid "Use hysteresis"
551 msgstr "Uso de histéresis"
560 "Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
561 "work, please install it."
568 "When multiple links exist between hosts the weight of interface is used to "
569 "determine the link to use. Normally the weight is automatically calculated "
570 "by olsrd based on the characteristics of the interface, but here you can "
571 "specify a fixed value. Olsrd will choose links with the lowest value.<br /"
572 "><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
573 "0. For any other value of LinkQualityLevel, the interface ETX value is used "
578 "Which kind of uplink is exported to the other mesh nodes. An uplink is "
579 "detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
580 "Default setting is \"both\"."
584 msgstr "<abbr title=\"Willingness\">Voluntad</abbr>"