3 "Project-Id-Version: PACKAGE VERSION\n"
4 "Report-Msgid-Bugs-To: \n"
5 "POT-Creation-Date: 2009-06-10 03:41+0200\n"
6 "PO-Revision-Date: 2012-08-22 22:07+0200\n"
7 "Last-Translator: José Vicente <josevteg@gmail.com>\n"
8 "Language-Team: LANGUAGE <LL@li.org>\n"
11 "Content-Type: text/plain; charset=UTF-8\n"
12 "Content-Transfer-Encoding: 8bit\n"
13 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
14 "X-Generator: Pootle 2.0.6\n"
16 msgid "Active MID announcements"
17 msgstr "Declaraciones MID activas"
19 msgid "Active OLSR nodes"
20 msgstr "Nodos OLSR activos"
22 msgid "Active host net announcements"
23 msgstr "Declaraciones activas de máquinas en la red"
25 msgid "Advanced Settings"
28 msgid "Allow gateways with NAT"
31 msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
34 msgid "Announce uplink"
35 msgstr "Declarar enlace de subida"
37 msgid "Announced network"
38 msgstr "Red declarada"
40 msgid "Both values must use the dotted decimal notation."
43 msgid "Broadcast address"
44 msgstr "Dirección de propagación"
58 msgid "Download Config"
68 "Enable SmartGateway. If it is disabled, then all other SmartGateway "
69 "parameters are ignored. Default is \"no\"."
72 msgid "Enable this interface."
78 msgid "Expected retransmission count"
79 msgstr "Contador de retransmisión esperado"
85 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
86 "means that the metric value is always 2. This is the preferred value because "
87 "it helps the linux kernel routing to clean up older routes. \"correct\" uses "
88 "the hopcount as the metric value. \"approx\" use the hopcount as the metric "
89 "value too, but does only update the hopcount if the nexthop changes too. "
90 "Default is \"flat\"."
93 msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
99 msgid "General Settings"
102 msgid "General settings"
103 msgstr "Configuración general"
108 msgid "HNA Announcements"
109 msgstr "Declaraciones HNA"
112 msgstr "Intervalo HNA"
114 msgid "HNA validity time"
115 msgstr "Timpo de validez de HNA"
120 msgid "Hello interval"
121 msgstr "Intervalo de saludo"
123 msgid "Hello validity time"
124 msgstr "Tiempo de validez del saludo"
139 "Hosts in a OLSR routed network can announce connecitivity to external "
140 "networks using HNA messages."
144 "Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
145 "robustness to the link sensing but delays neighbor registration. Defaults is "
153 "IP-version to use. If 6and4 is selected then one olsrd instance is started "
160 msgid "IPv4 broadcast"
161 msgstr "Dirección de propagación IPv4"
164 "IPv4 broadcast address for outgoing OLSR packets. One useful example would "
165 "be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
166 "interface broadcast IP."
173 "IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
174 "triggers usage of the interface IP."
180 msgid "IPv6 multicast"
184 "IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
189 "IPv6 network must be given in full notation, prefix must be in CIDR notation."
196 "IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
197 "the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
198 "of a not-linklocal interface IP."
201 msgid "IPv6-Prefix of the uplink"
205 "If the route to the current gateway is to be changed, the ETX value of this "
206 "gateway is multiplied with this value before it is compared to the new one. "
207 "The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
208 "if changed.<br /><b>WARNING:</b> This parameter should not be used together "
209 "with the etx_ffeth metric!<br />Defaults to \"1.0\"."
213 "If this Node uses NAT for connections to the internet. Default is \"yes\"."
220 "Interface Mode is used to prevent unnecessary packet forwarding on switched "
221 "ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
228 msgid "Interfaces Defaults"
231 msgid "Internet protocol"
232 msgstr "Protocolo de Internet"
235 "Interval to poll network interfaces for configuration changes (in seconds). "
236 "Default is \"2.5\"."
239 msgid "Known OLSR routes"
240 msgstr "Rutas OLSR conocidas"
249 msgstr "Algoritmo LQ"
252 msgstr "Ojo de pez LQ"
258 msgstr "Último salto"
266 msgid "Link Quality Settings"
270 "Link quality aging factor (only for lq level 2). Tuning parameter for "
271 "etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
272 "(allowed values are between 0.01 and 1.0)"
276 "Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
277 "floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
278 "etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
279 "etx variant which use all OLSR traffic (instead of only hellos) for ETX "
280 "calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
281 "allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
285 "Link quality level switch between hopcount and cost-based (mostly ETX) "
286 "routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
287 "quality for MPR selection and routing<br />Default is \"2\""
290 msgid "LinkQuality Multiplicator"
293 msgid "Links per node (average)"
299 msgid "Local interface IP"
300 msgstr "IP de la interfaz local"
306 msgstr "Intervalo de MID"
308 msgid "MID validity time"
309 msgstr "Tiempo de validez de MID"
318 "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
319 "configured on port 2006 and accepts connections from \"127.0.0.1\"."
321 "Asegúrese de que olsrd se está ejecutando, que el plugin \"txtinfo\" esté "
322 "cargado, configurado en el puerto 2006 y que acepta conexiones desde "
332 "Multiply routes with the factor given here. Allowed values are between 0.01 "
333 "and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
334 ">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
335 "nodes on this interface by 20%: default 0.8"
338 msgid "NAT threshold"
354 msgstr "Máscara de red"
359 msgid "Network address"
362 msgid "Nic changes poll interval"
371 msgid "OLSR - Display Options"
374 msgid "OLSR - HNA-Announcements"
375 msgstr "Declaraciones HNA de OLSR"
377 msgid "OLSR - Plugins"
378 msgstr "Plugins OLSR"
381 msgstr "Demonio OLSR"
383 msgid "OLSR Daemon - Interface"
386 msgid "OLSR connections"
387 msgstr "Conexiones OLSR"
390 msgstr "Puerta de enlace OLSR"
398 msgid "Overview of currently active OLSR host net announcements"
399 msgstr "Resumen de declaraciones OLSR de máquinas activas"
401 msgid "Overview of currently established OLSR connections"
403 "Detalle general acerca de las conexiones de OLSR establecidas actualmente"
405 msgid "Overview of currently known OLSR nodes"
406 msgstr "Listado de nodos actualmente conocido OLSR"
408 msgid "Overview of currently known routes to other OLSR nodes"
409 msgstr "Listado de las rutas conocidas en la actualidad a otros nodos de OLSR"
411 msgid "Overview of interfaces where OLSR is running"
414 msgid "Overview of known multiple interface announcements"
415 msgstr "Declaraciones de múltiples interfaces conocidas"
417 msgid "Overview of smart gateways in this network"
420 msgid "Plugin configuration"
421 msgstr "Configuración del plugin"
426 msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
430 msgstr "Tasa de sondeo"
442 "Resolve hostnames on status pages. It is generally safe to allow this, but "
443 "if you use public IPs and have unstable DNS-Setup then those pages will load "
444 "really slow. In this case disable it here."
450 msgid "Secondary OLSR interfaces"
451 msgstr "Interfaces OLSR secundarias"
454 "Sets the main IP (originator ip) of the router. This IP will NEVER change "
455 "during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
456 "IP of the first interface."
462 msgid "SmartGW announcements"
463 msgstr "Declaraciones SmartGW"
465 msgid "SmartGateway is not configured on this system."
468 msgid "Source address"
469 msgstr "Dirección origen"
472 "Specifies the speed of the uplink in kilobits/s. First parameter is "
473 "upstream, second parameter is downstream. Default is \"128 1024\"."
476 msgid "Speed of the uplink"
485 msgid "Success rate of packages received from the neighbour"
488 msgid "Success rate of packages sent to the neighbour"
495 msgstr "Intervalo TC"
497 msgid "TC validity time"
498 msgstr "Timpo de validez de TC"
504 "The OLSR daemon is an implementation of the Optimized Link State Routing "
505 "protocol. As such it allows mesh routing for any network equipment. It runs "
506 "on any wifi card that supports ad-hoc mode and of course on any ethernet "
507 "device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
512 "The fixed willingness to use. If not set willingness will be calculated "
513 "dynamically based on battery/power status. Default is \"3\"."
516 msgid "The interface OLSRd should serve."
520 "The port OLSR uses. This should usually stay at the IANA assigned port 698. "
521 "It can have a value between 1 and 65535."
525 "This can be used to signal the external IPv6 prefix of the uplink to the "
526 "clients. This might allow a client to change it's local IPv6 address to use "
527 "the IPv6 gateway without any kind of address translation. The maximum prefix "
528 "length is 64 bits. Default is \"::/0\" (no prefix)."
531 msgid "Timing and Validity"
538 "Type of service value for the IP header of control traffic. Default is \"16"
542 msgid "Unable to connect to the OLSR daemon!"
543 msgstr "No es posible conectar con el demonio de OLSR!"
548 msgid "Uplink uses NAT"
551 msgid "Use hysteresis"
552 msgstr "Uso de histéresis"
561 "Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
562 "work, please install it."
569 "When multiple links exist between hosts the weight of interface is used to "
570 "determine the link to use. Normally the weight is automatically calculated "
571 "by olsrd based on the characteristics of the interface, but here you can "
572 "specify a fixed value. Olsrd will choose links with the lowest value.<br /"
573 "><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
574 "0. For any other value of LinkQualityLevel, the interface ETX value is used "
579 "Which kind of uplink is exported to the other mesh nodes. An uplink is "
580 "detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
581 "Default setting is \"both\"."
585 msgstr "<abbr title=\"Willingness\">Voluntad</abbr>"