4 "Project-Id-Version: PACKAGE VERSION\n"
5 "Report-Msgid-Bugs-To: \n"
6 "POT-Creation-Date: 2009-05-19 19:35+0200\n"
7 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
8 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
9 "Language-Team: LANGUAGE <LL@li.org>\n"
11 "Content-Type: text/plain; charset=UTF-8\n"
12 "Content-Transfer-Encoding: 8bit\n"
14 "X-Generator: Translate Toolkit 1.1.1\n"
16 msgid "Active MID announcements"
17 msgstr "Active MID announcements"
19 msgid "Active OLSR nodes"
20 msgstr "Active OLSR nodes"
22 msgid "Active host net announcements"
23 msgstr "Active host net announcements"
25 msgid "Advanced Settings"
28 msgid "Allow gateways with NAT"
31 msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
34 msgid "Announce uplink"
37 msgid "Announced network"
38 msgstr "Announced network"
40 msgid "Both values must use the dotted decimal notation."
43 msgid "Broadcast address"
58 msgid "Download Config"
68 "Enable SmartGateway. If it is disabled, then all other SmartGateway "
69 "parameters are ignored. Default is \"no\"."
72 msgid "Enable this interface."
78 msgid "Expected retransmission count"
79 msgstr "Expected retransmission count"
85 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
86 "means that the metric value is always 2. This is the preferred value because "
87 "it helps the linux kernel routing to clean up older routes. \"correct\" uses "
88 "the hopcount as the metric value. \"approx\" use the hopcount as the metric "
89 "value too, but does only update the hopcount if the nexthop changes too. "
90 "Default is \"flat\"."
93 msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
99 msgid "General Settings"
102 msgid "General settings"
103 msgstr "General settings"
108 msgid "HNA Announcements"
112 msgstr "HNA interval"
114 msgid "HNA validity time"
115 msgstr "HNA validity time"
120 msgid "Hello interval"
121 msgstr "Hello interval"
123 msgid "Hello validity time"
124 msgstr "Hello validity time"
139 "Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
140 "robustness to the link sensing but delays neighbor registration. Defaults is "
148 "IP-version to use. If 6and4 is selected then one olsrd instance is started "
155 msgid "IPv4 broadcast"
156 msgstr "IPv4 broadcast"
159 "IPv4 broadcast address for outgoing OLSR packets. One useful example would "
160 "be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
161 "interface broadcast IP."
168 "IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
169 "triggers usage of the interface IP."
175 msgid "IPv6 multicast"
179 "IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
184 "IPv6 network must be given in full notation, prefix must be in CIDR notation."
191 "IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
192 "the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
193 "of a not-linklocal interface IP."
196 msgid "IPv6-Prefix of the uplink"
200 "If the route to the current gateway is to be changed, the ETX value of this "
201 "gateway is multiplied with this value before it is compared to the new one. "
202 "The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
203 "if changed.<br /><b>WARNING:</b> This parameter should not be used together "
204 "with the etx_ffeth metric!<br />Defaults to \"1.0\"."
208 "If this Node uses NAT for connections to the internet. Default is \"yes\"."
215 "Interface Mode is used to prevent unnecessary packet forwarding on switched "
216 "ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
223 msgid "Interfaces Defaults"
226 msgid "Internet protocol"
227 msgstr "Internet protocol"
230 "Interval to poll network interfaces for configuration changes (in seconds). "
231 "Default is \"2.5\"."
234 msgid "Known OLSR routes"
235 msgstr "Known OLSR routes"
241 msgstr "LQ algorithm"
258 msgid "Link Quality Settings"
262 "Link quality aging factor (only for lq level 2). Tuning parameter for "
263 "etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
264 "(allowed values are between 0.01 and 1.0)"
268 "Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
269 "floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
270 "etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
271 "etx variant which use all OLSR traffic (instead of only hellos) for ETX "
272 "calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
273 "allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
277 "Link quality level switch between hopcount and cost-based (mostly ETX) "
278 "routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
279 "quality for MPR selection and routing<br />Default is \"2\""
282 msgid "LinkQuality Multiplicator"
285 msgid "Links per node (average)"
291 msgid "Local interface IP"
292 msgstr "Local interface IP"
298 msgstr "MID interval"
300 msgid "MID validity time"
301 msgstr "MID validity time"
310 "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
311 "configured on port 2006 and accepts connections from \"127.0.0.1\"."
313 "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
314 "configured on port 2006 and accepts connections from \"127.0.0.1\"."
323 "Multiply routes with the factor given here. Allowed values are between 0.01 "
324 "and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
325 ">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
326 "nodes on this interface by 20%: default 0.8"
329 msgid "NAT threshold"
336 msgstr "Neighbour IP"
347 msgid "Network address"
350 msgid "Nic changes poll interval"
359 msgid "OLSR - Display Options"
362 msgid "OLSR - HNA-Announcements"
363 msgstr "OLSR - HNA-Announcements"
365 msgid "OLSR - Plugins"
366 msgstr "OLSR - Plugins"
371 msgid "OLSR Daemon - Interface"
374 msgid "OLSR connections"
375 msgstr "OLSR connections"
378 msgstr "OLSR gateway"
386 msgid "Overview of currently active OLSR host net announcements"
387 msgstr "Overview of currently active OLSR host net announcements"
389 msgid "Overview of currently established OLSR connections"
390 msgstr "Overview of currently established OLSR connections"
392 msgid "Overview of currently known OLSR nodes"
393 msgstr "Overview of currently known OLSR nodes"
395 msgid "Overview of currently known routes to other OLSR nodes"
396 msgstr "Overview of currently known routes to other OLSR nodes"
398 msgid "Overview of interfaces where OLSR is running"
401 msgid "Overview of known multiple interface announcements"
402 msgstr "Overview of known multiple interface announcements"
404 msgid "Overview of smart gateways in this network"
407 msgid "Plugin configuration"
408 msgstr "Plugin configuration"
413 msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
429 "Resolve hostnames on status pages. It is generally safe to allow this, but "
430 "if you use public IPs and have unstable DNS-Setup then those pages will load "
431 "really slow. In this case disable it here."
437 msgid "Secondary OLSR interfaces"
438 msgstr "Secondary OLSR interfaces"
441 "Sets the main IP (originator ip) of the router. This IP will NEVER change "
442 "during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
443 "IP of the first interface."
449 msgid "SmartGW announcements"
452 msgid "SmartGateway is not configured on this system."
455 msgid "Source address"
459 "Specifies the speed of the uplink in kilobits/s. First parameter is "
460 "upstream, second parameter is downstream. Default is \"128 1024\"."
463 msgid "Speed of the uplink"
472 msgid "Success rate of packages received from the neighbour"
475 msgid "Success rate of packages sent to the neighbour"
484 msgid "TC validity time"
485 msgstr "TC validity time"
491 "The OLSR daemon is an implementation of the Optimized Link State Routing "
492 "protocol. As such it allows mesh routing for any network equipment. It runs "
493 "on any wifi card that supports ad-hoc mode and of course on any ethernet "
494 "device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
499 "The fixed willingness to use. If not set willingness will be calculated "
500 "dynamically based on battery/power status. Default is \"3\"."
503 msgid "The interface OLSRd should serve."
507 "The port OLSR uses. This should usually stay at the IANA assigned port 698. "
508 "It can have a value between 1 and 65535."
512 "This can be used to signal the external IPv6 prefix of the uplink to the "
513 "clients. This might allow a client to change it's local IPv6 address to use "
514 "the IPv6 gateway without any kind of address translation. The maximum prefix "
515 "length is 64 bits. Default is \"::/0\" (no prefix)."
518 msgid "Timing and Validity"
525 "Type of service value for the IP header of control traffic. Default is \"16"
529 msgid "Unable to connect to the OLSR daemon!"
530 msgstr "Unable to connect to the OLSR daemon!"
535 msgid "Uplink uses NAT"
538 msgid "Use hysteresis"
539 msgstr "Use hysteresis"
548 "Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
549 "work, please install it."
556 "When multiple links exist between hosts the weight of interface is used to "
557 "determine the link to use. Normally the weight is automatically calculated "
558 "by olsrd based on the characteristics of the interface, but here you can "
559 "specify a fixed value. Olsrd will choose links with the lowest value.<br /"
560 "><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
561 "0. For any other value of LinkQualityLevel, the interface ETX value is used "
566 "Which kind of uplink is exported to the other mesh nodes. An uplink is "
567 "detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
568 "Default setting is \"both\"."