2 # generated from ./applications/luci-olsr/luasrc/i18n/olsr.en.lua
5 "Project-Id-Version: PACKAGE VERSION\n"
6 "Report-Msgid-Bugs-To: \n"
7 "POT-Creation-Date: 2009-06-10 03:40+0200\n"
8 "PO-Revision-Date: 2009-05-29 01:03+0200\n"
9 "Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
10 "Language-Team: LANGUAGE <LL@li.org>\n"
13 "Content-Type: text/plain; charset=UTF-8\n"
14 "Content-Transfer-Encoding: 8bit\n"
15 "X-Generator: Pootle 1.1.0\n"
17 msgid "Active MID announcements"
18 msgstr "Anuncis MID actius"
20 msgid "Active OLSR nodes"
21 msgstr "Nodes OLSR actius"
23 msgid "Active host net announcements"
24 msgstr "Anuncis de xarxa de màquines actives"
26 msgid "Advanced Settings"
29 msgid "Announced network"
30 msgstr "Xarxa anunciada"
32 msgid "Broadcast address"
47 msgid "Download Config"
56 msgid "Enable this interface."
62 msgid "Expected retransmission count"
63 msgstr "Compte de retransmissió previst"
69 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
70 "means that the metric value is always 2. This is the preferred value because "
71 "it helps the linux kernel routing to clean up older routes. \"correct\" uses "
72 "the hopcount as the metric value. \"approx\" use the hopcount as the metric "
73 "value too, but does only update the hopcount if the nexthop changes too. "
74 "Default is \"flat\"."
77 msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
83 msgid "General Settings"
86 msgid "General settings"
87 msgstr "Configuració general"
92 msgid "HNA Announcements"
98 msgid "HNA validity time"
99 msgstr "Temps de validesa HNA"
104 msgid "Hello interval"
105 msgstr "Interval Hello"
107 msgid "Hello validity time"
108 msgstr "Temps de validesa Hello"
117 "Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
118 "robustness to the link sensing but delays neighbor registration. Defaults is "
126 "IP-version to use. If 6and4 is selected then one olsrd instance is started "
133 msgid "IPv4 broadcast"
134 msgstr "Broadcast IPv4"
137 "IPv4 broadcast address for outgoing OLSR packets. One useful example would "
138 "be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
139 "interface broadcast IP."
146 "IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
147 "triggers usage of the interface IP."
153 msgid "IPv6 multicast"
157 "IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
165 "IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
166 "the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
167 "of a not-linklocal interface IP."
171 "If the route to the current gateway is to be changed, the ETX value of this "
172 "gateway is multiplied with this value before it is compared to the new one. "
173 "The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
174 "if changed.<br /><b>WARNING:</b> This parameter should not be used together "
175 "with the etx_ffeth metric!<br />Defaults to \"1.0\"."
182 "Interface Mode is used to prevent unnecessary packet forwarding on switched "
183 "ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
190 msgid "Interfaces Defaults"
193 msgid "Internet protocol"
194 msgstr "Protocol d'Internet"
197 "Interval to poll network interfaces for configuration changes (in seconds). "
198 "Default is \"2.5\"."
201 msgid "Known OLSR routes"
202 msgstr "Rutes OLSR conegudes"
205 msgstr "Envelliment LQ"
208 msgstr "Algoritme LQ"
225 msgid "Link Quality Settings"
229 "Link quality aging factor (only for lq level 2). Tuning parameter for "
230 "etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
231 "(allowed values are between 0.01 and 1.0)"
235 "Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
236 "floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
237 "ext_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
238 "etx variant which use all OLSR traffic (instead of only hellos) for ETX "
239 "calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
240 "allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
244 "Link quality level switch between hopcount and cost-based (mostly ETX) "
245 "routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
246 "quality for MPR selection and routing<br />Default is \"2\""
249 msgid "LinkQuality Multiplicator"
252 msgid "Links per node (average)"
258 msgid "Local interface IP"
259 msgstr "IP d'interfície local"
265 msgstr "Interval MID"
267 msgid "MID validity time"
268 msgstr "Temps de validesa MID"
277 "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
278 "configured on port 2006 and accepts connections from \"127.0.0.1\"."
280 "Assegura't que l'OLSRd està corrent, que el connector \"txtinfo\" està "
281 "carregat, configurat al port 2006, i que accepta connexions de \"127.0.0.1\"."
290 "Multiply routes with the factor given here. Allowed values are between 0.01 "
291 "and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
292 ">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
293 "nodes on this interface by 20%: default 0.8"
296 msgid "NAT threshold"
309 msgstr "Màscara de xarxa"
314 msgid "Network address"
317 msgid "Nic changes poll interval"
326 msgid "OLSR - Display Options"
329 msgid "OLSR - HNA-Announcements"
330 msgstr "Anuncis OLSR - HNA"
332 msgid "OLSR - Plugins"
333 msgstr "OLSR - Connectors"
338 msgid "OLSR Daemon - Interface"
341 msgid "OLSR connections"
342 msgstr "Connexions OLSR"
345 msgstr "Passarel·la OLSR"
353 msgid "Overview of currently active OLSR host net announcements"
354 msgstr "Vista general d'anuncis de xarxa de màquines OLSR actives"
356 msgid "Overview of currently established OLSR connections"
357 msgstr "Vista general de les connexions OLSR establertes actualment"
359 msgid "Overview of currently known OLSR nodes"
360 msgstr "Vista general dels nodes OLSR coneguts actualment"
362 msgid "Overview of currently known routes to other OLSR nodes"
363 msgstr "Vista general de rutes conegudes actualment a altres nodes OLSR"
365 msgid "Overview of interfaces where OLSR is running"
368 msgid "Overview of known multiple interface announcements"
369 msgstr "Vista general d'anuncis d'interfície múltiple coneguts"
371 msgid "Overview of smart gateways in this network"
374 msgid "Plugin configuration"
375 msgstr "Configuració de connector"
380 msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
384 msgstr "Taxa de sondeig"
396 "Resolve hostnames on status pages. It is generally safe to allow this, but "
397 "if you use public IPs and have unstable DNS-Setup then those pages will load "
398 "really slow. In this case disable it here."
407 msgid "Secondary OLSR interfaces"
408 msgstr "Interfícies OSLR secundàries"
411 "Sets the main IP (originator ip) of the router. This IP will NEVER change "
412 "during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
413 "IP of the first interface."
419 msgid "SmartGW announcements"
422 msgid "SmartGateway is not configured on this system."
425 msgid "Source address"
434 msgid "Success rate of packages received from the neighbour"
437 msgid "Success rate of packages sent to the neighbour"
446 msgid "TC validity time"
447 msgstr "Temps de validesa TC"
453 "The OLSR daemon is an implementation of the Optimized Link State Routing "
454 "protocol. As such it allows mesh routing for any network equipment. It runs "
455 "on any wifi card that supports ad-hoc mode and of course on any ethernet "
456 "device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
461 "The fixed willingness to use. If not set willingness will be calculated "
462 "dynamically based on battery/power status. Default is \"3\"."
465 msgid "The interface OLSRd should serve."
469 "The port OLSR uses. This should usually stay at the IANA assigned port 698. "
470 "It can have a value between 1 and 65535."
473 msgid "Timing and Validity"
483 "Type of service value for the IP header of control traffic. Default is "
487 msgid "Unable to connect to the OLSR daemon!"
488 msgstr "No s'ha pogut connectar al dimoni OLSR"
493 msgid "Use hysteresis"
494 msgstr "Utilitza histèresi"
506 "When multiple links exist between hosts the weight of interface is used to "
507 "determine the link to use. Normally the weight is automatically calculated "
508 "by olsrd based on the characteristics of the interface, but here you can "
509 "specify a fixed value. Olsrd will choose links with the lowest value.<br /"
510 "><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
511 "0. For any other value of LinkQualityLevel, the interface ETX value is used "