2 # generated from ./applications/luci-olsr/luasrc/i18n/olsr.en.lua
5 "Project-Id-Version: PACKAGE VERSION\n"
6 "Report-Msgid-Bugs-To: \n"
7 "POT-Creation-Date: 2009-06-10 03:40+0200\n"
8 "PO-Revision-Date: 2009-05-29 01:03+0200\n"
9 "Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
10 "Language-Team: LANGUAGE <LL@li.org>\n"
13 "Content-Type: text/plain; charset=UTF-8\n"
14 "Content-Transfer-Encoding: 8bit\n"
15 "X-Generator: Pootle 1.1.0\n"
17 msgid "Active MID announcements"
18 msgstr "Anuncis MID actius"
20 msgid "Active OLSR nodes"
21 msgstr "Nodes OLSR actius"
23 msgid "Active host net announcements"
24 msgstr "Anuncis de xarxa de màquines actives"
26 msgid "Advanced Settings"
29 msgid "Announced network"
30 msgstr "Xarxa anunciada"
32 msgid "Broadcast address"
44 msgid "Download Config"
53 msgid "Enable this interface."
59 msgid "Expected retransmission count"
60 msgstr "Compte de retransmissió previst"
66 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
67 "means that the metric value is always 2. This is the preferred value because "
68 "it helps the linux kernel routing to clean up older routes. \"correct\" uses "
69 "the hopcount as the metric value. \"approx\" use the hopcount as the metric "
70 "value too, but does only update the hopcount if the nexthop changes too. "
71 "Default is \"flat\"."
74 msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
80 msgid "General Settings"
83 msgid "General settings"
84 msgstr "Configuració general"
92 msgid "HNA validity time"
93 msgstr "Temps de validesa HNA"
98 msgid "Hello interval"
99 msgstr "Interval Hello"
101 msgid "Hello validity time"
102 msgstr "Temps de validesa Hello"
111 "Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
112 "robustness to the link sensing but delays neighbor registration. Defaults is "
120 "IP-version to use. If 6and4 is selected then one olsrd instance is started "
127 msgid "IPv4 broadcast"
128 msgstr "Broadcast IPv4"
131 "IPv4 broadcast address for outgoing OLSR packets. One useful example would "
132 "be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
133 "interface broadcast IP."
140 "IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
141 "triggers usage of the interface IP."
147 msgid "IPv6 multicast"
151 "IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
159 "IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
160 "the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
161 "of a not-linklocal interface IP."
165 "If the route to the current gateway is to be changed, the ETX value of this "
166 "gateway is multiplied with this value before it is compared to the new one. "
167 "The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
168 "if changed.<br /><b>WARNING:</b> This parameter should not be used together "
169 "with the etx_ffeth metric!<br />Defaults to \"1.0\"."
176 "Interface Mode is used to prevent unnecessary packet forwarding on switched "
177 "ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
184 msgid "Interfaces Defaults"
187 msgid "Internet protocol"
188 msgstr "Protocol d'Internet"
191 "Interval to poll network interfaces for configuration changes (in seconds). "
192 "Default is \"2.5\"."
195 msgid "Known OLSR routes"
196 msgstr "Rutes OLSR conegudes"
199 msgstr "Envelliment LQ"
202 msgstr "Algoritme LQ"
219 msgid "Link Quality Settings"
223 "Link quality aging factor (only for lq level 2). Tuning parameter for "
224 "etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
225 "(allowed values are between 0.01 and 1.0)"
229 "Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
230 "floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
231 "ext_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
232 "etx variant which use all OLSR traffic (instead of only hellos) for ETX "
233 "calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
234 "allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
238 "Link quality level switch between hopcount and cost-based (mostly ETX) "
239 "routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
240 "quality for MPR selection and routing<br />Default is \"2\""
243 msgid "LinkQuality Multiplicator"
246 msgid "Links per node (average)"
252 msgid "Local interface IP"
253 msgstr "IP d'interfície local"
259 msgstr "Interval MID"
261 msgid "MID validity time"
262 msgstr "Temps de validesa MID"
271 "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
272 "configured on port 2006 and accepts connections from \"127.0.0.1\"."
274 "Assegura't que l'OLSRd està corrent, que el connector \"txtinfo\" està "
275 "carregat, configurat al port 2006, i que accepta connexions de \"127.0.0.1\"."
284 "Multiply routes with the factor given here. Allowed values are between 0.01 "
285 "and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
286 ">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
287 "nodes on this interface by 20%: default 0.8"
290 msgid "NAT threshold"
300 msgstr "Màscara de xarxa"
305 msgid "Network address"
308 msgid "Nic changes poll interval"
314 msgid "OLSR - HNA-Announcements"
315 msgstr "Anuncis OLSR - HNA"
317 msgid "OLSR - Plugins"
318 msgstr "OLSR - Connectors"
323 msgid "OLSR Daemon - Interface"
326 msgid "OLSR connections"
327 msgstr "Connexions OLSR"
330 msgstr "Passarel·la OLSR"
338 msgid "Overview of currently active OLSR host net announcements"
339 msgstr "Vista general d'anuncis de xarxa de màquines OLSR actives"
341 msgid "Overview of currently established OLSR connections"
342 msgstr "Vista general de les connexions OLSR establertes actualment"
344 msgid "Overview of currently known OLSR nodes"
345 msgstr "Vista general dels nodes OLSR coneguts actualment"
347 msgid "Overview of currently known routes to other OLSR nodes"
348 msgstr "Vista general de rutes conegudes actualment a altres nodes OLSR"
350 msgid "Overview of interfaces where OLSR is running"
353 msgid "Overview of known multiple interface announcements"
354 msgstr "Vista general d'anuncis d'interfície múltiple coneguts"
356 msgid "Overview of smart gateways in this network"
359 msgid "Plugin configuration"
360 msgstr "Configuració de connector"
365 msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
369 msgstr "Taxa de sondeig"
380 msgid "Secondary OLSR interfaces"
381 msgstr "Interfícies OSLR secundàries"
384 "Sets the main IP (originator ip) of the router. This IP will NEVER change "
385 "during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
386 "IP of the first interface."
389 msgid "SmartGW announcements"
392 msgid "Source address"
401 msgid "Success rate of packages received from the neighbour"
404 msgid "Success rate of packages sent to the neighbour"
413 msgid "TC validity time"
414 msgstr "Temps de validesa TC"
420 "The OLSR daemon is an implementation of the Optimized Link State Routing "
421 "protocol. As such it allows mesh routing for any network equipment. It runs "
422 "on any wifi card that supports ad-hoc mode and of course on any ethernet "
423 "device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
428 "The fixed willingness to use. If not set willingness will be calculated "
429 "dynamically based on battery/power status. Default is \"3\"."
432 msgid "The interface OLSRd should serve."
436 "The port OLSR uses. This should usually stay at the IANA assigned port 698. "
437 "It can have a value between 1 and 65535."
440 msgid "Timing and Validity"
447 "Type of service value for the IP header of control traffic. Default is "
451 msgid "Unable to connect to the OLSR daemon!"
452 msgstr "No s'ha pogut connectar al dimoni OLSR"
457 msgid "Use hysteresis"
458 msgstr "Utilitza histèresi"
470 "When multiple links exist between hosts the weight of interface is used to "
471 "determine the link to use. Normally the weight is automatically calculated "
472 "by olsrd based on the characteristics of the interface, but here you can "
473 "specify a fixed value. Olsrd will choose links with the lowest value.<br /"
474 "><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
475 "0. For any other value of LinkQualityLevel, the interface ETX value is used "