4 * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
6 * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc.
8 * SPDX-License-Identifier: GPL-2.0+
11 #ifndef __CONFIG_PENGWYN_H
12 #define __CONFIG_PENGWYN_H
15 #define CONFIG_SERIAL1
16 #define CONFIG_CONS_INDEX 1
18 #include <configs/ti_am335x_common.h>
21 #define V_OSCK 24000000
25 #define CONFIG_ENV_SIZE 0x4000
27 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
29 #ifndef CONFIG_SPL_BUILD
30 #define CONFIG_EXTRA_ENV_SETTINGS \
31 "loadaddr=0x80200000\0" \
32 "fdtaddr=0x80F80000\0" \
36 "fdtfile=am335x-pengwyn.dtb\0" \
37 "console=ttyO0,115200n8\0" \
40 "mmcroot=/dev/mmcblk0p2 ro\0" \
41 "mmcrootfstype=ext4 rootwait\0" \
42 "rootpath=/export/rootfs\0" \
44 "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
46 "mmcargs=setenv bootargs console=${console} " \
49 "rootfstype=${mmcrootfstype}\0" \
50 "netargs=setenv bootargs console=${console} " \
53 "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
55 "bootenv=uEnv.txt\0" \
56 "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
57 "importbootenv=echo Importing environment from mmc ...; " \
58 "env import -t $loadaddr $filesize\0" \
59 "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
60 "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
61 "mmcloados=run mmcargs; " \
62 "bootz ${loadaddr} - ${fdtaddr};\0" \
63 "mmcboot=mmc dev ${mmcdev}; " \
64 "if mmc rescan; then " \
65 "echo SD/MMC found on device ${mmcdev};" \
66 "if run loadbootenv; then " \
67 "echo Loaded environment from ${bootenv};" \
68 "run importbootenv;" \
70 "if test -n $uenvcmd; then " \
71 "echo Running uenvcmd ...;" \
74 "if run loadimage; then " \
79 "netboot=echo Booting from network ...; " \
80 "setenv autoload no; " \
82 "tftp ${loadaddr} ${bootfile}; " \
83 "tftp ${fdtaddr} ${fdtfile}; " \
85 "bootz ${loadaddr} - ${fdtaddr}\0" \
86 "mtdids=" MTDIDS_DEFAULT "\0" \
87 "mtdparts=" MTDPARTS_DEFAULT "\0" \
88 "nandargs=setenv bootargs console=${console} " \
91 "rootfstype=${nandrootfstype}\0" \
92 "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
93 "nandrootfstype=ubifs rootwait=1\0" \
94 "nandboot=echo Booting from nand ...; " \
96 "nand read ${fdtaddr} u-boot-spl-os; " \
97 "nand read ${loadaddr} kernel; " \
98 "bootz ${loadaddr} - ${fdtaddr}\0"
101 #define CONFIG_BOOTCOMMAND \
105 /* NS16550 Configuration: primary UART via FDTI */
106 #define CONFIG_SYS_NS16550_COM1 0x44e09000
107 #define CONFIG_BAUDRATE 115200
109 /* I2C Configuration */
110 #define CONFIG_SYS_I2C_SPEED 100000
111 #define CONFIG_CMD_EEPROM
112 #define CONFIG_ENV_EEPROM_IS_ON_I2C
113 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
114 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
115 #define CONFIG_SYS_I2C_MULTI_EEPROMS
118 #define CONFIG_SPL_POWER_SUPPORT
119 #define CONFIG_SPL_YMODEM_SUPPORT
121 /* General network SPL */
122 #define CONFIG_SPL_NET_SUPPORT
123 #define CONFIG_SPL_ENV_SUPPORT
124 #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
127 #define CONFIG_CMD_NAND
128 #define CONFIG_NAND_OMAP_GPMC
129 #define CONFIG_NAND_OMAP_ELM
131 /* NAND Configuration. */
132 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
133 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
134 CONFIG_SYS_NAND_PAGE_SIZE)
135 #define CONFIG_SYS_NAND_PAGE_SIZE 4096
136 #define CONFIG_SYS_NAND_OOBSIZE 224
137 #define CONFIG_SYS_NAND_ONFI_DETECTION
138 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*4096)
139 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
140 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,\
141 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\
142 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49,\
143 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65,\
144 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81,\
145 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97,\
146 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,\
147 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133,\
148 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153,\
149 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,\
150 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193,\
151 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209}
154 #define CONFIG_SYS_NAND_ECCSIZE 512
155 #define CONFIG_SYS_NAND_ECCBYTES 26
156 #define CONFIG_SYS_NAND_ECCSTEPS 8
157 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
158 CONFIG_SYS_NAND_ECCSTEPS)
159 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
160 /* END NAND Configuration. */
162 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
163 /* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */
164 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
168 #define CONFIG_CMD_MTDPARTS
170 #define CONFIG_CMD_ASKENV /* monitor functions : ask for env variable */
171 #define CONFIG_VERSION_VARIABLE /* monitor functions : u-boot version */
172 #define CONFIG_CMD_DIAG /* monitor functions : Diagnostics */
174 #define MTDIDS_DEFAULT "nand0=omap2-nand.0"
175 /* Size must be a multiple of Nand erase size (524288 b) */
176 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(SPL)," \
177 "512k(SPL.backup1)," \
178 "512k(SPL.backup2)," \
179 "512k(SPL.backup3),1536k(u-boot)," \
180 "512k(u-boot-spl-os)," \
181 "512k(u-boot-env),5m(kernel),-(rootfs)"
182 #define CONFIG_ENV_IS_IN_NAND
183 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
184 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
185 /* NAND: SPL falcon mode configs */
186 #ifdef CONFIG_SPL_OS_BOOT
187 #define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* un-assigned */
188 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
189 #define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
193 * USB configuration. We enable MUSB support, both for host and for
194 * gadget. We set USB0 as peripheral and USB1 as host, based on the
195 * board schematic and physical port wired to each. Then for host we
196 * add mass storage support.
198 #define CONFIG_USB_MUSB_DSPS
199 #define CONFIG_ARCH_MISC_INIT
200 #define CONFIG_USB_MUSB_GADGET
201 #define CONFIG_USB_MUSB_PIO_ONLY
202 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
203 #define CONFIG_USB_GADGET
204 #define CONFIG_USB_GADGET_DUALSPEED
205 #define CONFIG_USB_GADGET_VBUS_DRAW 2
206 #define CONFIG_USB_MUSB_HOST
207 #define CONFIG_AM335X_USB0
208 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
209 #define CONFIG_AM335X_USB1
210 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
212 #if defined(CONFIG_USB_MUSB_HOST)
213 #define CONFIG_CMD_USB
214 #define CONFIG_USB_STORAGE
217 #if defined(CONFIG_SPL_BUILD)
218 /* disable host part of MUSB in SPL */
219 #undef CONFIG_USB_MUSB_HOST
220 /* Disable CPSW SPL support so we fit within the 101KiB limit. */
221 #undef CONFIG_SPL_ETH_SUPPORT
225 #define CONFIG_NET_MULTI
228 #define CONFIG_CMD_MII
229 #define CONFIG_PHYLIB
230 #define CONFIG_PHY_RESET 1
231 #define CONFIG_PHY_NATSEMI
232 #define CONFIG_PHY_REALTEK
235 #define CONFIG_SPL_ETH_SUPPORT
237 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
239 #endif /* ! __CONFIG_PENGWYN_H */