2 * Real Time Clock driver for WL-HDD
4 * Copyright (C) 2007 Andreas Engel
6 * Hacked together mostly by copying the relevant code parts from:
7 * drivers/i2c/i2c-bcm5365.c
8 * drivers/i2c/i2c-algo-bit.c
12 * This module uses the standard char device (10,135), while the Asus module
13 * rtcdrv.o uses (12,0). So, both can coexist which might be handy during
14 * development (but see the comment in rtc_open()).
17 * You might need to set the clock once after loading the driver the first
18 * time because the driver switches the chip into 24h mode if it is running
22 * For compatibility reasons with the original asus driver, the time can be
23 * read and set via the /dev/rtc device entry. The only accepted data format
24 * is "YYYY:MM:DD:W:HH:MM:SS\n". See OpenWrt wiki for a script which handles
27 * In addition, this driver supports the standard ioctl() calls for setting
28 * and reading the hardware clock, so the ordinary hwclock utility can also
31 * This program is free software; you can redistribute it and/or
32 * modify it under the terms of the GNU General Public License
33 * as published by the Free Software Foundation; either version
34 * 2 of the License, or (at your option) any later version.
37 * - add a /proc/driver/rtc interface?
38 * - make the battery failure bit available through the /proc interface?
40 * $Id: rtc.c 7 2007-05-25 19:37:01Z ae $
43 #include <linux/module.h>
44 #include <linux/kmod.h>
45 #include <linux/kernel.h>
46 #include <linux/types.h>
47 #include <linux/miscdevice.h>
48 #include <linux/ioport.h>
49 #include <linux/fcntl.h>
50 #include <linux/init.h>
51 #include <linux/spinlock.h>
52 #include <linux/rtc.h>
53 #include <linux/delay.h>
54 #include <linux/version.h>
55 #include <linux/smp_lock.h>
57 #include <asm/uaccess.h>
58 #include <asm/system.h>
62 #define RTC_IS_OPEN 0x01 /* Means /dev/rtc is in use. */
64 /* Can be changed via a module parameter. */
65 static int rtc_debug = 0;
67 static unsigned long rtc_status = 0; /* Bitmapped status byte. */
69 static spinlock_t rtc_lock = SPIN_LOCK_UNLOCKED;
71 /* These settings are platform dependents. */
72 unsigned int sda_index = 0;
73 unsigned int scl_index = 0;
75 #define I2C_READ_MASK 1
76 #define I2C_WRITE_MASK 0
81 #define RTC_EPOCH 1900
82 #define RTC_I2C_ADDRESS (0x32 << 1)
83 #define RTC_24HOUR_MODE_MASK 0x20
84 #define RTC_PM_MASK 0x20
85 #define RTC_VDET_MASK 0x40
86 #define RTC_Y2K_MASK 0x80
89 * Delay in microseconds for generating the pulses on the I2C bus. We use
90 * a rather conservative setting here. See datasheet of the RTC chip.
94 /* Avoid spurious compiler warnings. */
95 #define UNUSED __attribute__((unused))
97 MODULE_AUTHOR("Andreas Engel");
98 MODULE_LICENSE("GPL");
100 /* Test stolen from switch-adm.c. */
101 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,52)
102 module_param(rtc_debug, int, 0);
104 MODULE_PARM(rtc_debug, "i");
107 static inline void sdalo(void)
109 gpio_direction_output(sda_index, 1);
113 static inline void sdahi(void)
115 gpio_direction_input(sda_index);
119 static inline void scllo(void)
121 gpio_direction_output(scl_index, 1);
125 static inline int getscl(void)
127 return (gpio_get_value(scl_index));
130 static inline int getsda(void)
132 return (gpio_get_value(sda_index));
136 * We shouldn't simply set the SCL pin to high. Like SDA, the SCL line is
137 * bidirectional too. According to the I2C spec, the slave is allowed to
138 * pull down the SCL line to slow down the clock, so we need to check this.
139 * Generally, we'd need a timeout here, but in our case, we just check the
140 * line, assuming the RTC chip behaves well.
142 static int sclhi(void)
144 gpio_direction_input(scl_index);
147 printk(KERN_ERR "SCL pin should be low\n");
153 static void i2c_start(void)
159 static void i2c_stop(void)
166 static int i2c_outb(int c)
171 /* assert: scl is low */
172 for (i = 7; i >= 0; i--) {
173 if (c & ( 1 << i )) {
178 if (sclhi() < 0) { /* timed out */
179 sdahi(); /* we don't want to block the net */
188 /* read ack: SDA should be pulled down by slave */
189 ack = getsda() == 0; /* ack: sda is pulled low ->success. */
193 printk(KERN_DEBUG "i2c_outb(0x%02x) -> %s\n",
194 c, ack ? "ACK": "NAK");
196 return ack; /* return 1 if device acked */
197 /* assert: scl is low (sda undef) */
200 static int i2c_inb(int ack)
203 unsigned int indata = 0;
205 /* assert: scl is low */
208 for (i = 0; i < 8; i++) {
231 printk(KERN_DEBUG "i2c_inb() -> 0x%02x\n", indata);
233 /* assert: scl is low */
234 return indata & 0xff;
237 static void i2c_init(void)
239 /* no gpio_control for EXTIF */
240 // gpio_control(sda_mask | scl_mask, 0);
242 gpio_set_value(sda_index, 0);
243 gpio_set_value(scl_index, 0);
248 static int rtc_open(UNUSED struct inode *inode, UNUSED struct file *filp)
250 spin_lock_irq(&rtc_lock);
252 if (rtc_status & RTC_IS_OPEN) {
253 spin_unlock_irq(&rtc_lock);
257 rtc_status |= RTC_IS_OPEN;
260 * The following call is only necessary if we use both this driver and
261 * the proprietary one from asus at the same time (which, b.t.w. only
262 * makes sense during development). Otherwise, each access via the asus
263 * driver will make access via this driver impossible.
267 spin_unlock_irq(&rtc_lock);
272 static int rtc_release(UNUSED struct inode *inode, UNUSED struct file *filp)
274 /* No need for locking here. */
275 rtc_status &= ~RTC_IS_OPEN;
279 static int from_bcd(int bcdnum)
283 for (fac = 1; bcdnum; fac *= 10) {
284 num += (bcdnum % 16) * fac;
291 static int to_bcd(int decnum)
295 for (fac = 1; decnum; fac *= 16) {
296 num += (decnum % 10) * fac;
303 static void get_rtc_time(struct rtc_time *rtc_tm)
308 * Read date and time from the RTC. We use read method (3).
312 i2c_outb(RTC_I2C_ADDRESS | I2C_READ_MASK);
313 cr2 = i2c_inb(I2C_ACK);
314 rtc_tm->tm_sec = i2c_inb(I2C_ACK);
315 rtc_tm->tm_min = i2c_inb(I2C_ACK);
316 rtc_tm->tm_hour = i2c_inb(I2C_ACK);
317 rtc_tm->tm_wday = i2c_inb(I2C_ACK);
318 rtc_tm->tm_mday = i2c_inb(I2C_ACK);
319 rtc_tm->tm_mon = i2c_inb(I2C_ACK);
320 rtc_tm->tm_year = i2c_inb(I2C_NAK);
323 if (cr2 & RTC_VDET_MASK) {
324 printk(KERN_WARNING "***RTC BATTERY FAILURE***\n");
327 /* Handle century bit */
328 if (rtc_tm->tm_mon & RTC_Y2K_MASK) {
329 rtc_tm->tm_mon &= ~RTC_Y2K_MASK;
330 rtc_tm->tm_year += 0x100;
333 rtc_tm->tm_sec = from_bcd(rtc_tm->tm_sec);
334 rtc_tm->tm_min = from_bcd(rtc_tm->tm_min);
335 rtc_tm->tm_hour = from_bcd(rtc_tm->tm_hour);
336 rtc_tm->tm_mday = from_bcd(rtc_tm->tm_mday);
337 rtc_tm->tm_mon = from_bcd(rtc_tm->tm_mon) - 1;
338 rtc_tm->tm_year = from_bcd(rtc_tm->tm_year);
340 rtc_tm->tm_isdst = -1; /* DST not known */
343 static void set_rtc_time(struct rtc_time *rtc_tm)
345 rtc_tm->tm_sec = to_bcd(rtc_tm->tm_sec);
346 rtc_tm->tm_min = to_bcd(rtc_tm->tm_min);
347 rtc_tm->tm_hour = to_bcd(rtc_tm->tm_hour);
348 rtc_tm->tm_mday = to_bcd(rtc_tm->tm_mday);
349 rtc_tm->tm_mon = to_bcd(rtc_tm->tm_mon + 1);
350 rtc_tm->tm_year = to_bcd(rtc_tm->tm_year);
352 if (rtc_tm->tm_year >= 0x100) {
353 rtc_tm->tm_year -= 0x100;
354 rtc_tm->tm_mon |= RTC_Y2K_MASK;
358 i2c_outb(RTC_I2C_ADDRESS | I2C_WRITE_MASK);
359 i2c_outb(0x00); /* set starting register to 0 (=seconds) */
360 i2c_outb(rtc_tm->tm_sec);
361 i2c_outb(rtc_tm->tm_min);
362 i2c_outb(rtc_tm->tm_hour);
363 i2c_outb(rtc_tm->tm_wday);
364 i2c_outb(rtc_tm->tm_mday);
365 i2c_outb(rtc_tm->tm_mon);
366 i2c_outb(rtc_tm->tm_year);
370 static ssize_t rtc_write(UNUSED struct file *filp, const char *buf,
371 size_t count, loff_t *ppos)
373 struct rtc_time rtc_tm;
377 if (!capable(CAP_SYS_TIME))
380 if (ppos != &filp->f_pos)
384 * For simplicity, the only acceptable format is:
385 * YYYY:MM:DD:W:HH:MM:SS\n
391 if (copy_from_user(buffer, buf, count))
394 buffer[sizeof(buffer)-1] = '\0';
398 rtc_tm.tm_year = simple_strtoul(p, &p, 10);
399 if (*p++ != ':') goto err_out;
401 rtc_tm.tm_mon = simple_strtoul(p, &p, 10) - 1;
402 if (*p++ != ':') goto err_out;
404 rtc_tm.tm_mday = simple_strtoul(p, &p, 10);
405 if (*p++ != ':') goto err_out;
407 rtc_tm.tm_wday = simple_strtoul(p, &p, 10);
408 if (*p++ != ':') goto err_out;
410 rtc_tm.tm_hour = simple_strtoul(p, &p, 10);
411 if (*p++ != ':') goto err_out;
413 rtc_tm.tm_min = simple_strtoul(p, &p, 10);
414 if (*p++ != ':') goto err_out;
416 rtc_tm.tm_sec = simple_strtoul(p, &p, 10);
417 if (*p != '\n') goto err_out;
419 rtc_tm.tm_year -= RTC_EPOCH;
421 set_rtc_time(&rtc_tm);
428 printk(KERN_ERR "invalid format: use YYYY:MM:DD:W:HH:MM:SS\\n\n");
433 static ssize_t rtc_read(UNUSED struct file *filp, char *buf, size_t count,
440 if (count == 0 || *ppos != 0)
445 len = sprintf(wbuf, "%04d:%02d:%02d:%d:%02d:%02d:%02d\n",
446 tm.tm_year + RTC_EPOCH,
454 if (len > (ssize_t)count)
457 if (copy_to_user(buf, wbuf, len))
465 static int rtc_do_ioctl(unsigned int cmd, unsigned long arg)
467 struct rtc_time rtc_tm;
471 memset(&rtc_tm, 0, sizeof(struct rtc_time));
472 get_rtc_time(&rtc_tm);
473 if (copy_to_user((void *)arg, &rtc_tm, sizeof(rtc_tm)))
478 if (!capable(CAP_SYS_TIME))
481 if (copy_from_user(&rtc_tm, (struct rtc_time *)arg,
482 sizeof(struct rtc_time)))
485 set_rtc_time(&rtc_tm);
495 static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
499 ret = rtc_do_ioctl(cmd, arg);
504 static const struct file_operations rtc_fops = {
505 .owner = THIS_MODULE,
509 .unlocked_ioctl = rtc_ioctl,
511 .release = rtc_release,
514 static struct miscdevice rtc_dev = {
520 /* Savagely ripped from diag.c. */
521 extern char *nvram_get(char *str);
522 #define getvar(str) (nvram_get(str)?:"")
523 static inline int startswith (char *source, char *cmp)
524 { return !strncmp(source,cmp,strlen(cmp)); }
525 static void platform_detect(void)
529 /* Based on "model_no". */
530 if ((buf = nvram_get("model_no"))) {
531 if (startswith(buf,"WL700")) { /* WL700* */
538 if (startswith(getvar("hardware_version"), "WL300-")) {
539 /* Either WL-300g or WL-HDD, do more extensive checks */
540 if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
541 (simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 1)) {
550 static int __init rtc_init(void)
556 if (sda_index == scl_index) {
557 printk(KERN_ERR "RTC-RV5C386A: unrecognized platform!\n");
564 * Switch RTC to 24h mode
567 i2c_outb(RTC_I2C_ADDRESS | I2C_WRITE_MASK);
568 i2c_outb(0xE4); /* start at address 0xE, transmission mode 4 */
569 cr1 = i2c_inb(I2C_NAK);
571 if ((cr1 & RTC_24HOUR_MODE_MASK) == 0) {
572 /* RTC is running in 12h mode */
573 printk(KERN_INFO "rtc.o: switching to 24h mode\n");
575 i2c_outb(RTC_I2C_ADDRESS | I2C_WRITE_MASK);
577 i2c_outb(cr1 | RTC_24HOUR_MODE_MASK);
581 misc_register(&rtc_dev);
583 printk(KERN_INFO "RV5C386A Real Time Clock Driver loaded\n");
588 static void __exit rtc_exit (void)
590 misc_deregister(&rtc_dev);
591 printk(KERN_INFO "Successfully removed RTC RV5C386A driver\n");
594 module_init(rtc_init);
595 module_exit(rtc_exit);