2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: rt2x00 generic device routines.
24 Supported chipsets: RT2460, RT2560, RT2570,
25 rt2561, rt2561s, rt2661, rt2571W & rt2671.
29 * Set enviroment defines for rt2x00.h
31 #define DRV_NAME "rt2x00lib"
33 #include <linux/kernel.h>
34 #include <linux/module.h>
35 #include <linux/version.h>
36 #include <linux/init.h>
37 #include <linux/delay.h>
38 #include <linux/etherdevice.h>
41 #include "rt2x00lib.h"
42 #include "rt2x00dev.h"
45 * Radio control handlers.
47 int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
52 * Don't enable the radio twice.
53 * or if the hardware button has been disabled.
55 if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
56 (test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags) &&
57 !test_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags)))
60 status = rt2x00dev->ops->lib->set_device_state(
61 rt2x00dev, STATE_RADIO_ON);
65 __set_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags);
67 rt2x00lib_toggle_rx(rt2x00dev, 1);
69 ieee80211_start_queues(rt2x00dev->hw);
71 if (is_interface_present(&rt2x00dev->interface))
72 rt2x00_start_link_tune(rt2x00dev);
77 void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
79 if (!__test_and_clear_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
82 rt2x00_stop_link_tune(rt2x00dev);
84 ieee80211_stop_queues(rt2x00dev->hw);
86 rt2x00lib_toggle_rx(rt2x00dev, 0);
88 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
91 void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, int enable)
94 * When we are disabling the rx, we should also stop the link tuner.
97 rt2x00_stop_link_tune(rt2x00dev);
99 rt2x00dev->ops->lib->set_device_state(rt2x00dev,
100 enable ? STATE_RADIO_RX_ON : STATE_RADIO_RX_OFF);
103 * When we are enabling the rx, we should also start the link tuner.
105 if (enable && is_interface_present(&rt2x00dev->interface))
106 rt2x00_start_link_tune(rt2x00dev);
109 static void rt2x00lib_link_tuner(struct work_struct *work)
111 struct rt2x00_dev *rt2x00dev =
112 container_of(work, struct rt2x00_dev, link.work.work);
115 * Update promisc mode (this function will first check
116 * if updating is really required).
118 rt2x00lib_config_promisc(rt2x00dev, rt2x00dev->interface.promisc);
121 * Cancel all link tuning if the eeprom has indicated
122 * it is not required.
124 if (test_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags))
127 rt2x00dev->ops->lib->link_tuner(rt2x00dev);
130 * Increase tuner counter, and reschedule the next link tuner run.
132 rt2x00dev->link.count++;
133 queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work,
140 void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, const int type)
142 if (!(is_interface_present(&rt2x00dev->interface) ^
143 test_bit(INTERFACE_ENABLED, &rt2x00dev->flags)) &&
144 !(is_monitor_present(&rt2x00dev->interface) ^
145 test_bit(INTERFACE_ENABLED_MONITOR, &rt2x00dev->flags)))
148 rt2x00dev->ops->lib->config_type(rt2x00dev, type);
150 if (type != IEEE80211_IF_TYPE_MNTR) {
151 if (is_interface_present(&rt2x00dev->interface))
152 __set_bit(INTERFACE_ENABLED, &rt2x00dev->flags);
154 __clear_bit(INTERFACE_ENABLED, &rt2x00dev->flags);
156 if (is_monitor_present(&rt2x00dev->interface))
157 __set_bit(INTERFACE_ENABLED_MONITOR,
160 __clear_bit(INTERFACE_ENABLED_MONITOR,
165 void rt2x00lib_config_phymode(struct rt2x00_dev *rt2x00dev, const int phymode)
167 if (rt2x00dev->rx_status.phymode == phymode)
170 rt2x00dev->ops->lib->config_phymode(rt2x00dev, phymode);
172 rt2x00dev->rx_status.phymode = phymode;
175 void rt2x00lib_config_channel(struct rt2x00_dev *rt2x00dev, const int value,
176 const int channel, const int freq, const int txpower)
178 if (channel == rt2x00dev->rx_status.channel)
181 rt2x00dev->ops->lib->config_channel(rt2x00dev, value, channel, txpower);
183 INFO(rt2x00dev, "Switching channel. "
184 "RF1: 0x%08x, RF2: 0x%08x, RF3: 0x%08x, RF3: 0x%08x.\n",
185 rt2x00dev->rf1, rt2x00dev->rf2,
186 rt2x00dev->rf3, rt2x00dev->rf4);
188 rt2x00dev->rx_status.freq = freq;
189 rt2x00dev->rx_status.channel = channel;
192 void rt2x00lib_config_promisc(struct rt2x00_dev *rt2x00dev, const int promisc)
195 * Monitor mode implies promisc mode enabled.
196 * In all other instances, check if we need to toggle promisc mode.
198 if (is_monitor_present(&rt2x00dev->interface) &&
199 !test_bit(INTERFACE_ENABLED_PROMISC, &rt2x00dev->flags)) {
200 rt2x00dev->ops->lib->config_promisc(rt2x00dev, 1);
201 __set_bit(INTERFACE_ENABLED_PROMISC, &rt2x00dev->flags);
204 if (test_bit(INTERFACE_ENABLED_PROMISC, &rt2x00dev->flags) != promisc) {
205 rt2x00dev->ops->lib->config_promisc(rt2x00dev, promisc);
206 __change_bit(INTERFACE_ENABLED_PROMISC, &rt2x00dev->flags);
210 void rt2x00lib_config_txpower(struct rt2x00_dev *rt2x00dev, const int txpower)
212 if (txpower == rt2x00dev->tx_power)
215 rt2x00dev->ops->lib->config_txpower(rt2x00dev, txpower);
217 rt2x00dev->tx_power = txpower;
220 void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
221 const int antenna_tx, const int antenna_rx)
223 if (rt2x00dev->rx_status.antenna == antenna_rx)
226 rt2x00dev->ops->lib->config_antenna(rt2x00dev, antenna_tx, antenna_rx);
228 rt2x00dev->rx_status.antenna = antenna_rx;
232 * Driver initialization handlers.
234 static void rt2x00lib_channel(struct ieee80211_channel *entry,
235 const int channel, const int tx_power, const int value)
237 entry->chan = channel;
239 entry->freq = 2407 + (5 * channel);
241 entry->freq = 5000 + (5 * channel);
244 IEEE80211_CHAN_W_IBSS |
245 IEEE80211_CHAN_W_ACTIVE_SCAN |
246 IEEE80211_CHAN_W_SCAN;
247 entry->power_level = tx_power;
248 entry->antenna_max = 0xff;
251 static void rt2x00lib_rate(struct ieee80211_rate *entry,
252 const int rate,const int mask, const int plcp, const int flags)
256 DEVICE_SET_RATE_FIELD(rate, RATE) |
257 DEVICE_SET_RATE_FIELD(mask, RATEMASK) |
258 DEVICE_SET_RATE_FIELD(plcp, PLCP);
259 entry->flags = flags;
260 entry->val2 = entry->val;
261 if (entry->flags & IEEE80211_RATE_PREAMBLE2)
262 entry->val2 |= DEVICE_SET_RATE_FIELD(1, PREAMBLE);
263 entry->min_rssi_ack = 0;
264 entry->min_rssi_ack_delta = 0;
267 static int rt2x00lib_init_hw_modes(struct rt2x00_dev *rt2x00dev,
268 struct hw_mode_spec *spec)
270 struct ieee80211_hw *hw = rt2x00dev->hw;
271 struct ieee80211_hw_mode *hwmodes;
272 struct ieee80211_channel *channels;
273 struct ieee80211_rate *rates;
275 unsigned char tx_power;
277 hwmodes = kzalloc(sizeof(*hwmodes) * spec->num_modes, GFP_KERNEL);
281 channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL);
283 goto exit_free_modes;
285 rates = kzalloc(sizeof(*rates) * spec->num_rates, GFP_KERNEL);
287 goto exit_free_channels;
290 * Initialize Rate list.
292 rt2x00lib_rate(&rates[0], 10, 0x001, 0x00, IEEE80211_RATE_CCK);
293 rt2x00lib_rate(&rates[1], 20, 0x003, 0x01, IEEE80211_RATE_CCK_2);
294 rt2x00lib_rate(&rates[2], 55, 0x007, 0x02, IEEE80211_RATE_CCK_2);
295 rt2x00lib_rate(&rates[3], 110, 0x00f, 0x03, IEEE80211_RATE_CCK_2);
297 if (spec->num_rates > 4) {
298 rt2x00lib_rate(&rates[4], 60, 0x01f, 0x0b, IEEE80211_RATE_OFDM);
299 rt2x00lib_rate(&rates[5], 90, 0x03f, 0x0f, IEEE80211_RATE_OFDM);
300 rt2x00lib_rate(&rates[6], 120, 0x07f, 0x0a, IEEE80211_RATE_OFDM);
301 rt2x00lib_rate(&rates[7], 180, 0x0ff, 0x0e, IEEE80211_RATE_OFDM);
302 rt2x00lib_rate(&rates[8], 240, 0x1ff, 0x09, IEEE80211_RATE_OFDM);
303 rt2x00lib_rate(&rates[9], 360, 0x3ff, 0x0d, IEEE80211_RATE_OFDM);
304 rt2x00lib_rate(&rates[10], 480, 0x7ff, 0x08, IEEE80211_RATE_OFDM);
305 rt2x00lib_rate(&rates[11], 540, 0xfff, 0x0c, IEEE80211_RATE_OFDM);
309 * Initialize Channel list.
311 for (i = 0; i < 14; i++)
312 rt2x00lib_channel(&channels[i], i + 1,
313 spec->tx_power_bg[i], spec->chan_val_bg[i]);
315 if (spec->num_channels > 14) {
316 for (i = 14; i < spec->num_channels; i++) {
318 channels[i].chan = 36;
320 channels[i].chan = 100;
322 channels[i].chan = 149;
323 channels[i].chan += ((i - 14) * 4);
325 if (spec->tx_power_a)
326 tx_power = spec->tx_power_a[i];
328 tx_power = spec->tx_power_default;
330 rt2x00lib_channel(&channels[i],
331 channels[i].chan, tx_power,
332 spec->chan_val_a[i]);
337 * Intitialize 802.11b
341 if (spec->num_modes > HWMODE_B) {
342 hwmodes[HWMODE_B].mode = MODE_IEEE80211B;
343 hwmodes[HWMODE_B].num_channels = 14;
344 hwmodes[HWMODE_B].num_rates = 4;
345 hwmodes[HWMODE_B].channels = channels;
346 hwmodes[HWMODE_B].rates = rates;
350 * Intitialize 802.11g
354 if (spec->num_modes > HWMODE_G) {
355 hwmodes[HWMODE_G].mode = MODE_IEEE80211G;
356 hwmodes[HWMODE_G].num_channels = 14;
357 hwmodes[HWMODE_G].num_rates = spec->num_rates;
358 hwmodes[HWMODE_G].channels = channels;
359 hwmodes[HWMODE_G].rates = rates;
363 * Intitialize 802.11a
365 * Channels: OFDM, UNII, HiperLAN2.
367 if (spec->num_modes > HWMODE_A) {
368 hwmodes[HWMODE_A].mode = MODE_IEEE80211A;
369 hwmodes[HWMODE_A].num_channels = spec->num_channels - 14;
370 hwmodes[HWMODE_A].num_rates = spec->num_rates - 4;
371 hwmodes[HWMODE_A].channels = &channels[14];
372 hwmodes[HWMODE_A].rates = &rates[4];
375 if (spec->num_modes > HWMODE_G &&
376 ieee80211_register_hwmode(hw, &hwmodes[HWMODE_G]))
377 goto exit_free_rates;
379 if (spec->num_modes > HWMODE_B &&
380 ieee80211_register_hwmode(hw, &hwmodes[HWMODE_B]))
381 goto exit_free_rates;
383 if (spec->num_modes > HWMODE_A &&
384 ieee80211_register_hwmode(hw, &hwmodes[HWMODE_A]))
385 goto exit_free_rates;
387 rt2x00dev->hwmodes = hwmodes;
401 ERROR(rt2x00dev, "Allocation ieee80211 modes failed.\n");
405 static void rt2x00lib_deinit_hw(struct rt2x00_dev *rt2x00dev)
407 if (test_bit(DEVICE_INITIALIZED_HW, &rt2x00dev->flags))
408 ieee80211_unregister_hw(rt2x00dev->hw);
410 if (likely(rt2x00dev->hwmodes)) {
411 kfree(rt2x00dev->hwmodes->channels);
412 kfree(rt2x00dev->hwmodes->rates);
413 kfree(rt2x00dev->hwmodes);
414 rt2x00dev->hwmodes = NULL;
418 static int rt2x00lib_init_hw(struct rt2x00_dev *rt2x00dev)
420 struct hw_mode_spec *spec = &rt2x00dev->spec;
424 * Initialize HW modes.
426 status = rt2x00lib_init_hw_modes(rt2x00dev, spec);
433 status = ieee80211_register_hw(rt2x00dev->hw);
435 rt2x00lib_deinit_hw(rt2x00dev);
439 __set_bit(DEVICE_INITIALIZED_HW, &rt2x00dev->flags);
445 * Initialization/uninitialization handlers.
447 static int rt2x00lib_alloc_ring_entries(struct data_ring *ring,
448 const u16 max_entries, const u16 data_size, const u16 desc_size)
450 struct data_entry *entry;
453 ring->stats.limit = max_entries;
454 ring->data_size = data_size;
455 ring->desc_size = desc_size;
458 * Allocate all ring entries.
460 entry = kzalloc(ring->stats.limit * sizeof(*entry), GFP_KERNEL);
464 for (i = 0; i < ring->stats.limit; i++) {
466 entry[i].ring = ring;
475 static int rt2x00lib_allocate_ring_entries(struct rt2x00_dev *rt2x00dev)
477 struct data_ring *ring;
480 * Allocate the RX ring.
482 if (rt2x00lib_alloc_ring_entries(rt2x00dev->rx,
483 RX_ENTRIES, DATA_FRAME_SIZE, rt2x00dev->ops->rxd_size))
487 * First allocate the TX rings.
489 txring_for_each(rt2x00dev, ring) {
490 if (rt2x00lib_alloc_ring_entries(ring,
491 TX_ENTRIES, DATA_FRAME_SIZE, rt2x00dev->ops->txd_size))
496 * Allocate the BEACON ring.
498 if (rt2x00lib_alloc_ring_entries(&rt2x00dev->bcn[0],
499 BEACON_ENTRIES, MGMT_FRAME_SIZE, rt2x00dev->ops->txd_size))
503 * Allocate the Atim ring.
505 if (test_bit(DEVICE_SUPPORT_ATIM, &rt2x00dev->flags)) {
506 if (rt2x00lib_alloc_ring_entries(&rt2x00dev->bcn[1],
507 ATIM_ENTRIES, DATA_FRAME_SIZE, rt2x00dev->ops->txd_size))
514 static void rt2x00lib_free_ring_entries(struct rt2x00_dev *rt2x00dev)
516 struct data_ring *ring;
518 ring_for_each(rt2x00dev, ring) {
524 int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
528 if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
532 * Allocate all data rings.
534 status = rt2x00lib_allocate_ring_entries(rt2x00dev);
536 ERROR(rt2x00dev, "DMA allocation failed.\n");
541 * Initialize the device.
543 status = rt2x00dev->ops->lib->initialize(rt2x00dev);
547 __set_bit(DEVICE_INITIALIZED, &rt2x00dev->flags);
550 * Register the rfkill handler.
552 status = rt2x00lib_register_rfkill(rt2x00dev);
554 goto exit_unitialize;
559 rt2x00lib_uninitialize(rt2x00dev);
562 rt2x00lib_free_ring_entries(rt2x00dev);
567 void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
569 if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
575 rt2x00lib_unregister_rfkill(rt2x00dev);
578 * Allow the HW to uninitialize.
580 rt2x00dev->ops->lib->uninitialize(rt2x00dev);
583 * Free allocated datarings.
585 rt2x00lib_free_ring_entries(rt2x00dev);
589 * driver allocation handlers.
591 static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev)
593 struct data_ring *ring;
594 unsigned int ring_num;
597 * We need the following rings:
601 * Atim: 1 (if supported)
603 ring_num = 2 + rt2x00dev->hw->queues +
604 test_bit(DEVICE_SUPPORT_ATIM, &rt2x00dev->flags);
606 ring = kzalloc(sizeof(*ring) * ring_num, GFP_KERNEL);
608 ERROR(rt2x00dev, "Ring allocation failed.\n");
613 * Initialize pointers
615 rt2x00dev->rx = &ring[0];
616 rt2x00dev->tx = &ring[1];
617 rt2x00dev->bcn = &ring[1 + rt2x00dev->hw->queues];
620 * Initialize ring parameters.
622 * cw_max: 2^10 = 1024.
624 ring_for_each(rt2x00dev, ring) {
625 ring->rt2x00dev = rt2x00dev;
626 ring->tx_params.aifs = 2;
627 ring->tx_params.cw_min = 5;
628 ring->tx_params.cw_max = 10;
634 int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
636 int retval = -ENOMEM;
639 * Let the driver probe the device to detect the capabilities.
641 retval = rt2x00dev->ops->lib->init_hw(rt2x00dev);
643 ERROR(rt2x00dev, "Failed to allocate device.\n");
648 * Initialize configuration work.
650 INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner);
653 * Reset current working type.
655 rt2x00dev->interface.type = -EINVAL;
658 * Allocate ring array.
660 retval = rt2x00lib_alloc_rings(rt2x00dev);
665 * Initialize ieee80211 structure.
667 retval = rt2x00lib_init_hw(rt2x00dev);
669 ERROR(rt2x00dev, "Failed to initialize hw.\n");
676 retval = rt2x00lib_allocate_rfkill(rt2x00dev);
681 * Open the debugfs entry.
683 rt2x00debug_register(rt2x00dev);
686 * Check if we need to load the firmware.
688 if (test_bit(FIRMWARE_REQUIRED, &rt2x00dev->flags)) {
690 * Request firmware and wait with further
691 * initializing of the card until the firmware
694 retval = rt2x00lib_load_firmware(rt2x00dev);
702 rt2x00lib_remove_dev(rt2x00dev);
706 EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
708 void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
713 rt2x00lib_disable_radio(rt2x00dev);
716 * Uninitialize device.
718 rt2x00lib_uninitialize(rt2x00dev);
721 * Close debugfs entry.
723 rt2x00debug_deregister(rt2x00dev);
728 rt2x00lib_free_rfkill(rt2x00dev);
731 * Free ieee80211_hw memory.
733 rt2x00lib_deinit_hw(rt2x00dev);
736 * Free ring structures.
738 kfree(rt2x00dev->rx);
739 rt2x00dev->rx = NULL;
740 rt2x00dev->tx = NULL;
741 rt2x00dev->bcn = NULL;
744 * Free EEPROM memory.
746 kfree(rt2x00dev->eeprom);
747 rt2x00dev->eeprom = NULL;
749 EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
752 * Device state handlers
754 int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev,
759 NOTICE(rt2x00dev, "Going to sleep.\n");
761 rt2x00lib_disable_radio(rt2x00dev);
764 * Set device mode to sleep for power management.
766 retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP);
770 rt2x00lib_remove_dev(rt2x00dev);
774 EXPORT_SYMBOL_GPL(rt2x00lib_suspend);
776 int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
780 NOTICE(rt2x00dev, "Waking up.\n");
782 retval = rt2x00lib_probe_dev(rt2x00dev);
784 ERROR(rt2x00dev, "Failed to allocate device.\n");
790 EXPORT_SYMBOL_GPL(rt2x00lib_resume);
793 * Interrupt context handlers.
795 void rt2x00lib_txdone(struct data_entry *entry,
796 const int status, const int retry)
798 struct rt2x00_dev *rt2x00dev = entry->ring->rt2x00dev;
799 struct ieee80211_tx_status *tx_status = &entry->tx_status;
800 struct ieee80211_low_level_stats *stats = &rt2x00dev->low_level_stats;
803 * Update TX statistics.
805 tx_status->flags = 0;
806 tx_status->ack_signal = 0;
807 tx_status->excessive_retries = (status == TX_FAIL_RETRY);
808 tx_status->retry_count = retry;
810 if (!(tx_status->control.flags & IEEE80211_TXCTL_NO_ACK)) {
811 if (status == TX_SUCCESS || status == TX_SUCCESS_RETRY)
812 tx_status->flags |= IEEE80211_TX_STATUS_ACK;
814 stats->dot11ACKFailureCount++;
817 tx_status->queue_length = entry->ring->stats.limit;
818 tx_status->queue_number = tx_status->control.queue;
820 if (tx_status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) {
821 if (status == TX_SUCCESS || status == TX_SUCCESS_RETRY)
822 stats->dot11RTSSuccessCount++;
824 stats->dot11RTSFailureCount++;
828 * Send the tx_status to mac80211,
829 * that method also cleans up the skb structure.
831 ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb, tx_status);
835 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
837 void rt2x00lib_rxdone(struct data_entry *entry, char *data,
838 const int size, const int signal, const int rssi, const int ofdm)
840 struct rt2x00_dev *rt2x00dev = entry->ring->rt2x00dev;
841 struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
842 struct ieee80211_hw_mode *mode;
843 struct ieee80211_rate *rate;
849 * Update RX statistics.
851 mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
852 for (i = 0; i < mode->num_rates; i++) {
853 rate = &mode->rates[i];
856 * When frame was received with an OFDM bitrate,
857 * the signal is the PLCP value. If it was received with
858 * a CCK bitrate the signal is the rate in 0.5kbit/s.
861 val = DEVICE_GET_RATE_FIELD(rate->val, RATE);
863 val = DEVICE_GET_RATE_FIELD(rate->val, PLCP);
867 * Check for preamble bit.
877 rx_status->rate = val;
878 rx_status->ssi = rssi;
879 rt2x00_update_link_rssi(&rt2x00dev->link, rssi);
882 * Let's allocate a sk_buff where we can store the received data in,
883 * note that if data is NULL, we still have to allocate a sk_buff
884 * but that we should use that to replace the sk_buff which is already
887 skb = dev_alloc_skb(size + NET_IP_ALIGN);
891 skb_reserve(skb, NET_IP_ALIGN);
895 memcpy(skb->data, data, size);
900 ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb, rx_status);
903 EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
906 * TX descriptor initializer
908 void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev,
909 struct data_entry *entry, struct data_desc *txd,
910 struct ieee80211_hdr *ieee80211hdr, unsigned int length,
911 struct ieee80211_tx_control *control)
913 struct data_entry_desc desc;
924 if (control->queue < rt2x00dev->hw->queues)
925 desc.queue = control->queue;
930 * Read required fields from ieee80211 header.
932 frame_control = le16_to_cpu(ieee80211hdr->frame_control);
933 seq_ctrl = le16_to_cpu(ieee80211hdr->seq_ctrl);
935 tx_rate = control->tx_rate;
938 * Check if this is a rts frame
940 if (is_rts_frame(frame_control)) {
941 __set_bit(ENTRY_TXD_RTS_FRAME, &entry->flags);
942 if (control->rts_cts_rate)
943 tx_rate = control->rts_cts_rate;
949 if (DEVICE_GET_RATE_FIELD(tx_rate, RATEMASK) & DEV_OFDM_RATE)
950 __set_bit(ENTRY_TXD_OFDM_RATE, &entry->flags);
953 * Check if more fragments are pending
955 if (ieee80211_get_morefrag(ieee80211hdr))
956 __set_bit(ENTRY_TXD_MORE_FRAG, &entry->flags);
959 * Beacons and probe responses require the tsf timestamp
960 * to be inserted into the frame.
962 if (control->queue == IEEE80211_TX_QUEUE_BEACON ||
963 is_probe_resp(frame_control))
964 __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &entry->flags);
967 * Check if ACK is required
969 if (!(control->flags & IEEE80211_TXCTL_NO_ACK))
970 __set_bit(ENTRY_TXD_REQ_ACK, &entry->flags);
973 * Determine with what IFS priority this frame should be send.
974 * Set ifs to IFS_SIFS when the this is not the first fragment,
975 * or this fragment came after RTS/CTS.
977 if ((seq_ctrl & IEEE80211_SCTL_FRAG) > 0 ||
978 test_bit(ENTRY_TXD_RTS_FRAME, &entry->flags))
981 desc.ifs = IFS_BACKOFF;
984 * How the length should be processed depends
985 * on if we are working with OFDM rates or not.
987 if (test_bit(ENTRY_TXD_OFDM_RATE, &entry->flags)) {
989 desc.length_high = ((length + FCS_LEN) >> 6) & 0x3f;
990 desc.length_low = ((length + FCS_LEN) & 0x3f);
993 bitrate = DEVICE_GET_RATE_FIELD(tx_rate, RATE);
996 * Convert length to microseconds.
998 residual = get_duration_res(length + FCS_LEN, bitrate);
999 duration = get_duration(length + FCS_LEN, bitrate);
1004 desc.length_high = duration >> 8;
1005 desc.length_low = duration & 0xff;
1009 * Create the signal and service values.
1011 desc.signal = DEVICE_GET_RATE_FIELD(tx_rate, PLCP);
1012 if (DEVICE_GET_RATE_FIELD(tx_rate, PREAMBLE))
1013 desc.signal |= 0x08;
1015 desc.service = 0x04;
1016 if (residual <= (8 % 11))
1017 desc.service |= 0x80;
1019 rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, entry, txd, &desc,
1020 ieee80211hdr, length, control);
1022 EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc);
1025 * rt2x00lib module information.
1027 MODULE_AUTHOR(DRV_PROJECT);
1028 MODULE_VERSION(DRV_VERSION);
1029 MODULE_DESCRIPTION("rt2x00 library");
1030 MODULE_LICENSE("GPL");