3 [ -n "$INCLUDE_ONLY" ] || {
9 proto_qmi_init_config() {
12 proto_config_add_string "device:device"
13 proto_config_add_string apn
14 proto_config_add_string auth
15 proto_config_add_string username
16 proto_config_add_string password
17 proto_config_add_string pincode
18 proto_config_add_int delay
19 proto_config_add_string modes
20 proto_config_add_string pdptype
21 proto_config_add_int profile
22 proto_config_add_boolean dhcpv6
23 proto_config_add_boolean autoconnect
24 proto_config_add_int plmn
25 proto_config_add_int timeout
26 proto_config_add_defaults
31 local dataformat connstat
32 local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn timeout $PROTO_DEFAULT_OPTIONS
33 local ip4table ip6table
34 local cid_4 pdh_4 cid_6 pdh_6
35 local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
36 json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn ip4table ip6table timeout $PROTO_DEFAULT_OPTIONS
38 [ "$timeout" = "" ] && timeout="10"
40 [ "$metric" = "" ] && metric="0"
42 [ -n "$ctl_device" ] && device=$ctl_device
45 echo "No control device specified"
46 proto_notify_error "$interface" NO_DEVICE
47 proto_set_available "$interface" 0
51 [ -n "$delay" ] && sleep "$delay"
53 device="$(readlink -f $device)"
55 echo "The specified control device does not exist"
56 proto_notify_error "$interface" NO_DEVICE
57 proto_set_available "$interface" 0
61 devname="$(basename "$device")"
62 devpath="$(readlink -f /sys/class/usbmisc/$devname/device/)"
63 ifname="$( ls "$devpath"/net )"
65 echo "The interface could not be found."
66 proto_notify_error "$interface" NO_IFACE
67 proto_set_available "$interface" 0
71 echo "Waiting for SIM initialization"
72 local uninitialized_timeout=0
73 while uqmi -s -d "$device" --get-pin-status | grep '"UIM uninitialized"' > /dev/null; do
74 [ -e "$device" ] || return 1
75 if [ "$uninitialized_timeout" -lt "$timeout" ]; then
76 let uninitialized_timeout++
79 echo "SIM not initialized"
80 proto_notify_error "$interface" SIM_NOT_INITIALIZED
81 proto_block_restart "$interface"
86 if uqmi -s -d "$device" --get-pin-status | grep '"Not supported"' > /dev/null; then
87 [ -n "$pincode" ] && {
88 uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null || {
89 echo "Unable to verify PIN"
90 proto_notify_error "$interface" PIN_FAILED
91 proto_block_restart "$interface"
96 . /usr/share/libubox/jshn.sh
97 json_load "$(uqmi -s -d "$device" --get-pin-status)"
98 json_get_var pin1_status pin1_status
99 json_get_var pin1_verify_tries pin1_verify_tries
101 case "$pin1_status" in
103 echo "PIN verification is disabled"
106 echo "SIM locked PUK required"
107 proto_notify_error "$interface" PUK_NEEDED
108 proto_block_restart "$interface"
112 [ "$pin1_verify_tries" -lt "3" ] && {
113 echo "PIN verify count value is $pin1_verify_tries this is below the limit of 3"
114 proto_notify_error "$interface" PIN_TRIES_BELOW_LIMIT
115 proto_block_restart "$interface"
118 if [ -n "$pincode" ]; then
119 uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null 2>&1 || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null 2>&1 || {
120 echo "Unable to verify PIN"
121 proto_notify_error "$interface" PIN_FAILED
122 proto_block_restart "$interface"
126 echo "PIN not specified but required"
127 proto_notify_error "$interface" PIN_NOT_SPECIFIED
128 proto_block_restart "$interface"
133 echo "PIN already verified"
136 echo "PIN status failed ($pin1_status)"
137 proto_notify_error "$interface" PIN_STATUS_FAILED
138 proto_block_restart "$interface"
146 if [ "$plmn" = 0 ]; then
149 echo "Setting PLMN to auto"
153 echo "Setting PLMN to $plmn"
155 uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev/null 2>&1 || {
156 echo "Unable to set PLMN"
157 proto_notify_error "$interface" PLMN_FAILED
158 proto_block_restart "$interface"
163 # Cleanup current state if any
164 uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect > /dev/null 2>&1
167 uqmi -s -d "$device" --set-data-format 802.3 > /dev/null 2>&1
168 uqmi -s -d "$device" --wda-set-data-format 802.3 > /dev/null 2>&1
169 dataformat="$(uqmi -s -d "$device" --wda-get-data-format)"
171 if [ "$dataformat" = '"raw-ip"' ]; then
173 [ -f /sys/class/net/$ifname/qmi/raw_ip ] || {
174 echo "Device only supports raw-ip mode but is missing this required driver attribute: /sys/class/net/$ifname/qmi/raw_ip"
178 echo "Device does not support 802.3 mode. Informing driver of raw-ip only for $ifname .."
179 echo "Y" > /sys/class/net/$ifname/qmi/raw_ip
182 uqmi -s -d "$device" --sync > /dev/null 2>&1
184 echo "Waiting for network registration"
185 local registration_timeout=0
186 while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > /dev/null; do
187 [ -e "$device" ] || return 1
188 if [ "$registration_timeout" -lt "$timeout" ]; then
189 let registration_timeout++
192 echo "Network registration failed"
193 proto_notify_error "$interface" NETWORK_REGISTRATION_FAILED
194 proto_block_restart "$interface"
199 [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" > /dev/null 2>&1
201 echo "Starting network $interface"
203 pdptype=$(echo "$pdptype" | awk '{print tolower($0)}')
204 [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype="ip"
206 if [ "$pdptype" = "ip" ]; then
207 [ -z "$autoconnect" ] && autoconnect=1
208 [ "$autoconnect" = 0 ] && autoconnect=""
210 [ "$autoconnect" = 1 ] || autoconnect=""
213 [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
214 cid_4=$(uqmi -s -d "$device" --get-client-id wds)
215 if ! [ "$cid_4" -eq "$cid_4" ] 2> /dev/null; then
216 echo "Unable to obtain client ID"
217 proto_notify_error "$interface" NO_CID
221 uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null 2>&1
223 pdh_4=$(uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
226 ${profile:+--profile $profile} \
227 ${auth:+--auth-type $auth} \
228 ${username:+--username $username} \
229 ${password:+--password $password} \
230 ${autoconnect:+--autoconnect})
232 # pdh_4 is a numeric value on success
233 if ! [ "$pdh_4" -eq "$pdh_4" ] 2> /dev/null; then
234 echo "Unable to connect IPv4"
235 uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds > /dev/null 2>&1
236 proto_notify_error "$interface" CALL_FAILED
240 # Check data connection state
241 connstat=$(uqmi -s -d "$device" --get-data-status)
242 [ "$connstat" == '"connected"' ] || {
244 uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds > /dev/null 2>&1
245 proto_notify_error "$interface" CALL_FAILED
250 [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
251 cid_6=$(uqmi -s -d "$device" --get-client-id wds)
252 if ! [ "$cid_6" -eq "$cid_6" ] 2> /dev/null; then
253 echo "Unable to obtain client ID"
254 proto_notify_error "$interface" NO_CID
258 uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null 2>&1
260 pdh_6=$(uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
263 ${profile:+--profile $profile} \
264 ${auth:+--auth-type $auth} \
265 ${username:+--username $username} \
266 ${password:+--password $password} \
267 ${autoconnect:+--autoconnect})
269 # pdh_6 is a numeric value on success
270 if ! [ "$pdh_6" -eq "$pdh_6" ] 2> /dev/null; then
271 echo "Unable to connect IPv6"
272 uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds > /dev/null 2>&1
273 proto_notify_error "$interface" CALL_FAILED
277 # Check data connection state
278 connstat=$(uqmi -s -d "$device" --get-data-status)
279 [ "$connstat" == '"connected"' ] || {
281 uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds > /dev/null 2>&1
282 proto_notify_error "$interface" CALL_FAILED
287 echo "Setting up $ifname"
288 proto_init_update "$ifname" 1
292 json_add_string "cid_4" "$cid_4"
293 json_add_string "pdh_4" "$pdh_4"
296 json_add_string "cid_6" "$cid_6"
297 json_add_string "pdh_6" "$pdh_6"
300 proto_send_update "$interface"
302 if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
303 json_load "$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
306 json_get_var gateway_6 gateway
307 json_get_var dns1_6 dns1
308 json_get_var dns2_6 dns2
309 json_get_var ip_prefix_length ip-prefix-length
311 proto_init_update "$ifname" 1
313 proto_add_ipv6_address "$ip_6" "128"
314 proto_add_ipv6_prefix "${ip_6}/${ip_prefix_length}"
315 proto_add_ipv6_route "$gateway_6" "128"
316 [ "$defaultroute" = 0 ] || proto_add_ipv6_route "::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
317 [ "$peerdns" = 0 ] || {
318 proto_add_dns_server "$dns1_6"
319 proto_add_dns_server "$dns2_6"
321 proto_send_update "$interface"
324 json_add_string name "${interface}_6"
325 json_add_string ifname "@$interface"
326 json_add_string proto "dhcpv6"
327 [ -n "$ip6table" ] && json_add_string ip6table "$ip6table"
328 proto_add_dynamic_defaults
329 # RFC 7278: Extend an IPv6 /64 Prefix to LAN
330 json_add_string extendprefix 1
332 ubus call network add_dynamic "$(json_dump)"
338 json_add_string name "${interface}_4"
339 json_add_string ifname "@$interface"
340 json_add_string proto "dhcp"
341 [ -n "$ip4table" ] && json_add_string ip4table "$ip4table"
342 proto_add_dynamic_defaults
344 ubus call network add_dynamic "$(json_dump)"
352 [ -n "$cid" ] || return
354 uqmi -s -d "$device" --set-client-id wds,"$cid" \
355 --stop-network 0xffffffff \
356 --autoconnect > /dev/null 2>&1
359 uqmi -s -d "$device" --set-client-id wds,"$cid" \
360 --stop-network "$pdh" > /dev/null 2>&1
363 uqmi -s -d "$device" --set-client-id wds,"$cid" \
364 --release-client-id wds > /dev/null 2>&1
367 proto_qmi_teardown() {
370 local device cid_4 pdh_4 cid_6 pdh_6
373 [ -n "$ctl_device" ] && device=$ctl_device
375 echo "Stopping network $interface"
377 json_load "$(ubus call network.interface.$interface status)"
379 json_get_vars cid_4 pdh_4 cid_6 pdh_6
381 qmi_wds_stop "$cid_4" "$pdh_4"
382 qmi_wds_stop "$cid_6" "$pdh_6"
384 proto_init_update "*" 0
385 proto_send_update "$interface"
388 [ -n "$INCLUDE_ONLY" ] || {