3 [ -n "$INCLUDE_ONLY" ] || {
9 proto_ncm_init_config() {
12 proto_config_add_string "device:device"
13 proto_config_add_string apn
14 proto_config_add_string auth
15 proto_config_add_string username
16 proto_config_add_string password
17 proto_config_add_string pincode
18 proto_config_add_string delay
19 proto_config_add_string mode
20 proto_config_add_string pdptype
21 proto_config_add_int profile
22 proto_config_add_defaults
28 local manufacturer initialize setmode connect finalize ifname devname devpath
30 local device apn auth username password pincode delay mode pdptype profile $PROTO_DEFAULT_OPTIONS
31 json_get_vars device apn auth username password pincode delay mode pdptype profile $PROTO_DEFAULT_OPTIONS
33 [ "$metric" = "" ] && metric="0"
35 [ -n "$profile" ] || profile=1
37 pdptype=$(echo "$pdptype" | awk '{print toupper($0)}')
38 [ "$pdptype" = "IP" -o "$pdptype" = "IPV6" -o "$pdptype" = "IPV4V6" ] || pdptype="IP"
40 [ -n "$ctl_device" ] && device=$ctl_device
43 echo "No control device specified"
44 proto_notify_error "$interface" NO_DEVICE
45 proto_set_available "$interface" 0
49 device="$(readlink -f $device)"
51 echo "Control device not valid"
52 proto_set_available "$interface" 0
56 devname="$(basename "$device")"
59 devpath="$(readlink -f /sys/class/tty/$devname/device)"
60 ifname="$( ls "$devpath"/../../*/net )"
63 devpath="$(readlink -f /sys/class/usbmisc/$devname/device/)"
64 ifname="$( ls "$devpath"/net )"
68 echo "The interface could not be found."
69 proto_notify_error "$interface" NO_IFACE
70 proto_set_available "$interface" 0
74 [ -n "$delay" ] && sleep "$delay"
76 manufacturer=$(gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk 'NF && $0 !~ /AT\+CGMI/ { sub(/\+CGMI: /,""); print tolower($1); exit; }')
77 [ $? -ne 0 -o -z "$manufacturer" ] && {
78 echo "Failed to get modem information"
79 proto_notify_error "$interface" GETINFO_FAILED
83 json_load "$(cat /etc/gcom/ncm.json)"
84 json_select "$manufacturer"
86 echo "Unsupported modem"
87 proto_notify_error "$interface" UNSUPPORTED_MODEM
88 proto_set_available "$interface" 0
92 json_get_values initialize initialize
93 for i in $initialize; do
94 eval COMMAND="$i" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
95 echo "Failed to initialize modem"
96 proto_notify_error "$interface" INITIALIZE_FAILED
101 [ -n "$pincode" ] && {
102 PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
103 echo "Unable to verify PIN"
104 proto_notify_error "$interface" PIN_FAILED
105 proto_block_restart "$interface"
110 json_get_values configure configure
111 echo "Configuring modem"
112 for i in $configure; do
113 eval COMMAND="$i" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
114 echo "Failed to configure modem"
115 proto_notify_error "$interface" CONFIGURE_FAILED
122 json_get_var setmode "$mode"
123 [ -n "$setmode" ] && {
125 eval COMMAND="$setmode" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
126 echo "Failed to set operating mode"
127 proto_notify_error "$interface" SETMODE_FAILED
134 echo "Starting network $interface"
135 json_get_vars connect
136 [ -n "$connect" ] && {
137 echo "Connecting modem"
138 eval COMMAND="$connect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
139 echo "Failed to connect"
140 proto_notify_error "$interface" CONNECT_FAILED
145 json_get_vars finalize
147 echo "Setting up $ifname"
148 proto_init_update "$ifname" 1
150 json_add_string "manufacturer" "$manufacturer"
152 proto_send_update "$interface"
154 local zone="$(fw3 -q network "$interface" 2>/dev/null)"
156 [ "$pdptype" = "IP" -o "$pdptype" = "IPV4V6" ] && {
158 json_add_string name "${interface}_4"
159 json_add_string ifname "@$interface"
160 json_add_string proto "dhcp"
161 proto_add_dynamic_defaults
163 json_add_string zone "$zone"
166 ubus call network add_dynamic "$(json_dump)"
169 [ "$pdptype" = "IPV6" -o "$pdptype" = "IPV4V6" ] && {
171 json_add_string name "${interface}_6"
172 json_add_string ifname "@$interface"
173 json_add_string proto "dhcpv6"
174 json_add_string extendprefix 1
175 proto_add_dynamic_defaults
177 json_add_string zone "$zone"
180 ubus call network add_dynamic "$(json_dump)"
183 [ -n "$finalize" ] && {
184 eval COMMAND="$finalize" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
185 echo "Failed to configure modem"
186 proto_notify_error "$interface" FINALIZE_FAILED
192 proto_ncm_teardown() {
195 local manufacturer disconnect
198 json_get_vars device profile
200 [ -n "$ctl_device" ] && device=$ctl_device
202 [ -n "$device" ] || {
203 echo "No control device specified"
204 proto_notify_error "$interface" NO_DEVICE
205 proto_set_available "$interface" 0
209 device="$(readlink -f $device)"
210 [ -e "$device" ] || {
211 echo "Control device not valid"
212 proto_set_available "$interface" 0
216 [ -n "$profile" ] || profile=1
218 echo "Stopping network $interface"
220 json_load "$(ubus call network.interface.$interface status)"
222 json_get_vars manufacturer
223 [ $? -ne 0 -o -z "$manufacturer" ] && {
224 # Fallback to direct detect, for proper handle device replug.
225 manufacturer=$(gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk 'NF && $0 !~ /AT\+CGMI/ { sub(/\+CGMI: /,""); print tolower($1); exit; }')
226 [ $? -ne 0 -o -z "$manufacturer" ] && {
227 echo "Failed to get modem information"
228 proto_notify_error "$interface" GETINFO_FAILED
231 json_add_string "manufacturer" "$manufacturer"
234 json_load "$(cat /etc/gcom/ncm.json)"
235 json_select "$manufacturer" || {
236 echo "Unsupported modem"
237 proto_notify_error "$interface" UNSUPPORTED_MODEM
241 json_get_vars disconnect
242 [ -n "$disconnect" ] && {
243 eval COMMAND="$disconnect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
244 echo "Failed to disconnect"
245 proto_notify_error "$interface" DISCONNECT_FAILED
250 proto_init_update "*" 0
251 proto_send_update "$interface"
253 [ -n "$INCLUDE_ONLY" ] || {