package/network/services/vpnc-scripts/files/vpnc-script

   1 #!/bin/sh
   2 # List of parameters passed through environment
   3 #* reason                       -- why this script was called, one of: pre-init connect disconnect
   4 #* VPNGATEWAY                   -- vpn gateway address (always present)
   5 #* TUNDEV                       -- tunnel device (always present)
   6 #* INTERNAL_IP4_ADDRESS         -- address (always present)
   7 #* INTERNAL_IP4_MTU             -- mtu (often unset)
   8 #* INTERNAL_IP4_NETMASK         -- netmask (often unset)
   9 #* INTERNAL_IP4_NETMASKLEN      -- netmask length (often unset)
  10 #* INTERNAL_IP4_NETADDR         -- address of network (only present if netmask is set)
  11 #* INTERNAL_IP4_DNS             -- list of dns servers
  12 #* INTERNAL_IP4_NBNS            -- list of wins servers
  13 #* INTERNAL_IP6_ADDRESS         -- IPv6 address
  14 #* INTERNAL_IP6_NETMASK         -- IPv6 netmask
  15 #* INTERNAL_IP6_DNS             -- IPv6 list of dns servers
  16 #* CISCO_DEF_DOMAIN             -- default domain name
  17 #* CISCO_BANNER                 -- banner from server
  18 #* CISCO_SPLIT_INC              -- number of networks in split-network-list
  19 #* CISCO_SPLIT_INC_%d_ADDR      -- network address
  20 #* CISCO_SPLIT_INC_%d_MASK      -- subnet mask (for example: 255.255.255.0)
  21 #* CISCO_SPLIT_INC_%d_MASKLEN   -- subnet masklen (for example: 24)
  22 #* CISCO_SPLIT_INC_%d_PROTOCOL  -- protocol (often just 0)
  23 #* CISCO_SPLIT_INC_%d_SPORT     -- source port (often just 0)
  24 #* CISCO_SPLIT_INC_%d_DPORT     -- destination port (often just 0)
  25 #* CISCO_IPV6_SPLIT_INC         -- number of networks in IPv6 split-network-list
  26 #* CISCO_IPV6_SPLIT_INC_%d_ADDR -- IPv6 network address
  27 #* CISCO_IPV6_SPLIT_INC_$%d_MASKLEN -- IPv6 subnet masklen
  28
  29 HOOKS_DIR=/etc/openconnect
  30
  31 # FIXMEs:
  32
  33 # Section A: route handling
  34
  35 # 1) The 3 values CISCO_SPLIT_INC_%d_PROTOCOL/SPORT/DPORT are currently being ignored
  36 #   In order to use them, we'll probably need os specific solutions
  37 #   * Linux: iptables -t mangle -I PREROUTING <conditions> -j ROUTE --oif $TUNDEV
  38 #       This would be an *alternative* to changing the routes (and thus 2) and 3)
  39 #       shouldn't be relevant at all)
  40 # 2) There are two different functions to set routes: generic routes and the
  41 #   default route. Why isn't the defaultroute handled via the generic route case?
  42 # 3) In the split tunnel case, all routes but the default route might get replaced
  43 #   without getting restored later. We should explicitely check and save them just
  44 #   like the defaultroute
  45 # 4) Replies to a dhcp-server should never be sent into the tunnel
  46
  47 # Section B: Split DNS handling
  48
  49 # 1) We parse CISCO_SPLIT_DNS and use dnsmasq to set it
  50
  51 do_connect() {
  52         if [ -n "$CISCO_BANNER" ]; then
  53                 logger -t openconnect "Connect Banner:"
  54                 echo "$CISCO_BANNER" | while read LINE ; do logger -t openconnect "|" "$LINE" ; done
  55         fi
  56
  57         proto_init_update "$TUNDEV" 1
  58
  59         if [ -n "$INTERNAL_IP4_MTU" ]; then
  60                 MTU=$INTERNAL_IP4_MTU
  61         fi
  62
  63         if [ -z "$MTU" ]; then
  64                 MTU=1412
  65         fi
  66
  67         proto_add_ipv4_address "$INTERNAL_IP4_ADDRESS" 32 "" "$INTERNAL_IP4_ADDRESS"
  68
  69         if [ -n "$INTERNAL_IP4_NETMASKLEN" ]; then
  70                 proto_add_ipv4_route "$INTERNAL_IP4_NETADDR" "$INTERNAL_IP4_NETMASKLEN"
  71         fi
  72
  73         # If the netmask is provided, it contains the address _and_ netmask
  74         if [ -n "$INTERNAL_IP6_ADDRESS" ] && [ -z "$INTERNAL_IP6_NETMASK" ]; then
  75             INTERNAL_IP6_NETMASK="$INTERNAL_IP6_ADDRESS/128"
  76         fi
  77
  78         if [ -n "$INTERNAL_IP6_NETMASK" ]; then
  79                 addr="${INTERNAL_IP6_NETMASK%%/*}"
  80                 mask="${INTERNAL_IP6_NETMASK##*/}"
  81                 [[ "$addr" != "$mask" ]] && proto_add_ipv6_address "$addr" "$mask"
  82         fi
  83
  84         DNSMASQ_FILE="/tmp/dnsmasq.d/openconnect.$TUNDEV"
  85         LOCAL_DOMAIN=$(uci get dhcp.@dnsmasq[0].domain)
  86         rm -f $DNSMASQ_FILE
  87         if [ -n "$CISCO_SPLIT_DNS" ] && [ -d "/tmp/dnsmasq.d/" ];then
  88                 SDNS=`echo $CISCO_SPLIT_DNS|sed 's/,/\n/g'`
  89                 echo "$SDNS" | while read i; do
  90                         if [ "$i" = "$LOCAL_DOMAIN" ];then
  91                                 continue
  92                         fi
  93                         if [ -n "$INTERNAL_IP4_DNS" ];then
  94                                 for dns in $INTERNAL_IP4_DNS;do
  95                                         echo "server=/$i/$dns" >> $DNSMASQ_FILE
  96                                 done
  97                         fi
  98                         if [ -n "$INTERNAL_IP6_DNS" ];then
  99                                 for dns in $INTERNAL_IP6_DNS;do
 100                                         echo "server=/$i/$dns" >> $DNSMASQ_FILE
 101                                 done
 102                         fi
 103                         echo "rebind-domain-ok=$i" >> $DNSMASQ_FILE
 104                 done
 105                 /etc/init.d/dnsmasq restart
 106         else
 107                 if [ -n "$INTERNAL_IP4_DNS" ];then
 108                         for dns in $INTERNAL_IP4_DNS;do
 109                                 proto_add_dns_server "$dns"
 110                         done
 111                 fi
 112                 if [ -n "$INTERNAL_IP6_DNS" ];then
 113                         for dns in $INTERNAL_IP6_DNS;do
 114                                 proto_add_dns_server "$dns"
 115                         done
 116                 fi
 117                 if [ -n "$CISCO_DEF_DOMAIN" ] && [ "$CISCO_DEF_DOMAIN" != "$LOCAL_DOMAIN" ];then
 118                         if [ -n "$INTERNAL_IP4_DNS" ];then
 119                                 for dns in $INTERNAL_IP4_DNS;do
 120                                         echo "server=/$CISCO_DEF_DOMAIN/$dns" >> $DNSMASQ_FILE
 121                                 done
 122                         fi
 123                         if [ -n "$INTERNAL_IP6_DNS" ];then
 124                                 for dns in $INTERNAL_IP6_DNS;do
 125                                         echo "server=/$CISCO_DEF_DOMAIN/$dns" >> $DNSMASQ_FILE
 126                                 done
 127                         fi
 128                         proto_add_dns_search "$CISCO_DEF_DOMAIN"
 129                 fi
 130         fi
 131
 132         if [ -n "$CISCO_SPLIT_INC" ]; then
 133                 i=0
 134                 while [ $i -lt $CISCO_SPLIT_INC ] ; do
 135                         eval NETWORK="\${CISCO_SPLIT_INC_${i}_ADDR}"
 136                         eval NETMASK="\${CISCO_SPLIT_INC_${i}_MASK}"
 137                         eval NETMASKLEN="\${CISCO_SPLIT_INC_${i}_MASKLEN}"
 138                         if [ $NETWORK != "0.0.0.0" ]; then
 139                                 proto_add_ipv4_route "$NETWORK" "$NETMASKLEN"
 140                         else
 141                                 proto_add_ipv4_route "0.0.0.0" 0
 142                         fi
 143                         i=$(($i + 1))
 144                 done
 145         elif [ -n "$INTERNAL_IP4_ADDRESS" ]; then
 146                 proto_add_ipv4_route "0.0.0.0" 0
 147         fi
 148         if [ -n "$CISCO_IPV6_SPLIT_INC" ]; then
 149                 i=0
 150                 while [ $i -lt $CISCO_IPV6_SPLIT_INC ] ; do
 151                         eval NETWORK="\${CISCO_IPV6_SPLIT_INC_${i}_ADDR}"
 152                         eval NETMASKLEN="\${CISCO_IPV6_SPLIT_INC_${i}_MASKLEN}"
 153                         if [ $NETMASKLEN -lt 128 ]; then
 154                                 proto_add_ipv6_route "$NETWORK" "$NETMASKLEN"
 155                         else
 156                                 proto_add_ipv6_route "::0" 0
 157                         fi
 158                         i=$(($i + 1))
 159                 done
 160         elif [ -n "$INTERNAL_IP6_NETMASK" -o -n "$INTERNAL_IP6_ADDRESS" ]; then
 161                 proto_add_ipv6_route "::0" 0
 162         fi
 163         proto_send_update "$INTERFACE"
 164 }
 165
 166 do_disconnect() {
 167         rm -f "/tmp/dnsmasq.d/openconnect.$TUNDEV"
 168         proto_init_update "$TUNDEV" 0
 169         proto_send_update "$INTERFACE"
 170 }
 171
 172 #### Hooks
 173 run_hooks() {
 174         HOOK="$1"
 175
 176         if [ -d ${HOOKS_DIR}/${HOOK}.d ]; then
 177                 for script in ${HOOKS_DIR}/${HOOK}.d/* ; do
 178                         [ -f $script ] && . $script
 179                 done
 180         fi
 181 }
 182
 183 #### Main
 184
 185 if [ -z "$reason" ]; then
 186         logger -t openconnect "this script must be called from vpnc" 1>&2
 187         exit 1
 188 fi
 189 if [ -z "$INTERFACE" ]; then
 190         logger -t openconnect "this script must be called for an active interface"
 191         exit 1
 192 fi
 193
 194 . /lib/netifd/netifd-proto.sh
 195
 196 case "$reason" in
 197         pre-init)
 198                 run_hooks pre-init
 199                 ;;
 200         connect)
 201                 run_hooks connect
 202                 do_connect
 203                 run_hooks post-connect
 204                 ;;
 205         disconnect)
 206                 run_hooks disconnect
 207                 do_disconnect
 208                 run_hooks post-disconnect
 209                 ;;
 210         reconnect)
 211                 run_hooks reconnect
 212                 ;;
 213         *)
 214                 logger -t openconnect "unknown reason '$reason'. Maybe vpnc-script is out of date" 1>&2
 215                 exit 1
 216                 ;;
 217 esac
 218
 219 exit 0