package/network/services/hostapd/patches/551-wpa_supplicant-Add-Multi-AP-protocol-support-to-supp.patch

   1 From 5abc7823bd01f69b8afbe1fd19f65fff86137c44 Mon Sep 17 00:00:00 2001
   2 From: Venkateswara Naralasetty <vnaralas@codeaurora.org>
   3 Date: Wed, 5 Dec 2018 11:23:53 +0100
   4 Subject: [PATCH] wpa_supplicant: Add Multi-AP backhaul STA support
   5
   6 Advertise vendor specific Multi-AP IE in (Re)Association Request frames
   7 and process Multi-AP IE from (Re)Association Response frames if the user
   8 enables Multi-AP fuctionality. If the (Re)Association Response frame
   9 does not contain the Multi-AP IE, disassociate.
  10
  11 This adds a new configuration parameter 'multi_ap_backhaul_sta' to
  12 enable/disable Multi-AP functionality.
  13
  14 Enable 4-address mode after association (if the Association Response
  15 frame contains the Multi-AP IE). Also enable the bridge in that case.
  16 This is necessary because wpa_supplicant only enables the bridge in
  17 wpa_drv_if_add(), which only gets called when an interface is added
  18 through the control interface, not when it is configured from the
  19 command line.
  20
  21 Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
  22 Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
  23 Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
  24 ---
  25  src/drivers/driver.h               |  9 ++++++
  26  src/drivers/driver_nl80211.c       | 44 ++++++++++++++++++++++++++
  27  wpa_supplicant/config.c            |  1 +
  28  wpa_supplicant/config_ssid.h       |  7 +++++
  29  wpa_supplicant/driver_i.h          |  8 +++++
  30  wpa_supplicant/events.c            | 50 ++++++++++++++++++++++++++++++
  31  wpa_supplicant/sme.c               | 16 ++++++++++
  32  wpa_supplicant/wpa_supplicant.c    | 18 +++++++++++
  33  wpa_supplicant/wpa_supplicant.conf |  7 +++++
  34  wpa_supplicant/wpa_supplicant_i.h  |  1 +
  35  10 files changed, 161 insertions(+)
  36
  37 --- a/src/drivers/driver.h
  38 +++ b/src/drivers/driver.h
  39 @@ -4100,6 +4100,15 @@ struct wpa_driver_ops {
  40          */
  41         int (*send_external_auth_status)(void *priv,
  42                                          struct external_auth *params);
  43 +
  44 +       /**
  45 +        * set_4addr_mode - Set 4-address mode
  46 +        * @priv: Private driver interface data
  47 +        * @bridge_ifname: Bridge interface name
  48 +        * @val: 0 - disable 4addr mode, 1 - enable 4addr mode
  49 +        * Returns: 0 on success, < 0 on failure
  50 +        */
  51 +       int (*set_4addr_mode)(void *priv, const char *bridge_ifname, int val);
  52  };
  53
  54  /**
  55 --- a/src/drivers/driver_nl80211.c
  56 +++ b/src/drivers/driver_nl80211.c
  57 @@ -10728,6 +10728,49 @@ fail:
  58  }
  59
  60
  61 +static int nl80211_set_4addr_mode(void *priv, const char *bridge_ifname,
  62 +                                 int val)
  63 +{
  64 +       struct i802_bss *bss = priv;
  65 +       struct wpa_driver_nl80211_data *drv = bss->drv;
  66 +       struct nl_msg *msg;
  67 +       int ret = -ENOBUFS;
  68 +
  69 +       wpa_printf(MSG_DEBUG, "nl80211: %s 4addr mode (bridge_ifname: %s)",
  70 +                  val ? "Enable" : "Disable", bridge_ifname);
  71 +
  72 +       msg = nl80211_cmd_msg(drv->first_bss, 0, NL80211_CMD_SET_INTERFACE);
  73 +       if (!msg || nla_put_u8(msg, NL80211_ATTR_4ADDR, val))
  74 +               goto fail;
  75 +
  76 +       if (bridge_ifname[0] && bss->added_if_into_bridge && !val) {
  77 +               if (linux_br_del_if(drv->global->ioctl_sock,
  78 +                                   bridge_ifname, bss->ifname)) {
  79 +                       wpa_printf(MSG_ERROR,
  80 +                                  "nl80211: Failed to remove interface %s from bridge %s",
  81 +                                  bss->ifname, bridge_ifname);
  82 +                       return -1;
  83 +               }
  84 +               bss->added_if_into_bridge = 0;
  85 +       }
  86 +
  87 +       ret = send_and_recv_msgs(drv, msg, NULL, NULL);
  88 +       msg = NULL;
  89 +       if (!ret) {
  90 +               if (bridge_ifname[0] && val &&
  91 +                   i802_check_bridge(drv, bss, bridge_ifname, bss->ifname) < 0)
  92 +                       return -1;
  93 +               return 0;
  94 +       }
  95 +
  96 +fail:
  97 +       nlmsg_free(msg);
  98 +       wpa_printf(MSG_ERROR, "nl80211: Failed to enable/disable 4addr");
  99 +
 100 +       return ret;
 101 +}
 102 +
 103 +
 104  const struct wpa_driver_ops wpa_driver_nl80211_ops = {
 105         .name = "nl80211",
 106         .desc = "Linux nl80211/cfg80211",
 107 @@ -10856,4 +10899,5 @@ const struct wpa_driver_ops wpa_driver_n
 108         .get_ext_capab = nl80211_get_ext_capab,
 109         .update_connect_params = nl80211_update_connection_params,
 110         .send_external_auth_status = nl80211_send_external_auth_status,
 111 +       .set_4addr_mode = nl80211_set_4addr_mode,
 112  };
 113 --- a/wpa_supplicant/config.c
 114 +++ b/wpa_supplicant/config.c
 115 @@ -2416,6 +2416,7 @@ static const struct parse_data ssid_fiel
 116  #endif /* CONFIG_DPP */
 117         { INT_RANGE(owe_group, 0, 65535) },
 118         { INT_RANGE(owe_only, 0, 1) },
 119 +       { INT_RANGE(multi_ap_backhaul_sta, 0, 1) },
 120  };
 121
 122  #undef OFFSET
 123 --- a/wpa_supplicant/config_ssid.h
 124 +++ b/wpa_supplicant/config_ssid.h
 125 @@ -950,6 +950,13 @@ struct wpa_ssid {
 126          * the selection attempts for OWE BSS exceed the configured threshold.
 127          */
 128         int owe_transition_bss_select_count;
 129 +
 130 +       /**
 131 +        * multi_ap_backhaul_sta - Multi-AP backhaul STA
 132 +        * 0 = normal (non-Multi-AP) station
 133 +        * 1 = Multi-AP backhaul station
 134 +        */
 135 +       int multi_ap_backhaul_sta;
 136  };
 137
 138  #endif /* CONFIG_SSID_H */
 139 --- a/wpa_supplicant/driver_i.h
 140 +++ b/wpa_supplicant/driver_i.h
 141 @@ -1046,4 +1046,12 @@ wpa_drv_send_external_auth_status(struct
 142                                                         params);
 143  }
 144
 145 +static inline int wpa_drv_set_4addr_mode(struct wpa_supplicant *wpa_s, int val)
 146 +{
 147 +       if (!wpa_s->driver->set_4addr_mode)
 148 +               return -1;
 149 +       return wpa_s->driver->set_4addr_mode(wpa_s->drv_priv,
 150 +                                            wpa_s->bridge_ifname, val);
 151 +}
 152 +
 153  #endif /* DRIVER_I_H */
 154 --- a/wpa_supplicant/events.c
 155 +++ b/wpa_supplicant/events.c
 156 @@ -324,6 +324,9 @@ void wpa_supplicant_mark_disassoc(struct
 157         os_memset(wpa_s->last_tk, 0, sizeof(wpa_s->last_tk));
 158  #endif /* CONFIG_TESTING_OPTIONS */
 159         wpa_s->ieee80211ac = 0;
 160 +
 161 +       if (wpa_s->enabled_4addr_mode && wpa_drv_set_4addr_mode(wpa_s, 0) == 0)
 162 +               wpa_s->enabled_4addr_mode = 0;
 163  }
 164
 165
 166 @@ -2267,6 +2270,50 @@ static void interworking_process_assoc_r
 167  #endif /* CONFIG_INTERWORKING */
 168
 169
 170 +static void multi_ap_process_assoc_resp(struct wpa_supplicant *wpa_s,
 171 +                                       const u8 *ies, size_t ies_len)
 172 +{
 173 +       struct ieee802_11_elems elems;
 174 +       const u8 *map_sub_elem, *pos;
 175 +       size_t len;
 176 +
 177 +       if (!wpa_s->current_ssid ||
 178 +           !wpa_s->current_ssid->multi_ap_backhaul_sta ||
 179 +           !ies ||
 180 +           ieee802_11_parse_elems(ies, ies_len, &elems, 1) == ParseFailed)
 181 +               return;
 182 +
 183 +       if (!elems.multi_ap || elems.multi_ap_len < 7) {
 184 +               wpa_printf(MSG_INFO, "AP doesn't support Multi-AP protocol");
 185 +               goto fail;
 186 +       }
 187 +
 188 +       pos = elems.multi_ap + 4;
 189 +       len = elems.multi_ap_len - 4;
 190 +
 191 +       map_sub_elem = get_ie(pos, len, MULTI_AP_SUB_ELEM_TYPE);
 192 +       if (!map_sub_elem || map_sub_elem[1] < 1) {
 193 +               wpa_printf(MSG_INFO, "invalid Multi-AP sub elem type");
 194 +               goto fail;
 195 +       }
 196 +
 197 +       if (!(map_sub_elem[2] & MULTI_AP_BACKHAUL_BSS)) {
 198 +               wpa_printf(MSG_INFO, "AP doesn't support backhaul BSS");
 199 +               goto fail;
 200 +       }
 201 +
 202 +       if (wpa_drv_set_4addr_mode(wpa_s, 1) < 0) {
 203 +               wpa_printf(MSG_ERROR, "Failed to set 4addr mode");
 204 +               goto fail;
 205 +       }
 206 +       wpa_s->enabled_4addr_mode = 1;
 207 +       return;
 208 +
 209 +fail:
 210 +       wpa_supplicant_deauthenticate(wpa_s, WLAN_REASON_DEAUTH_LEAVING);
 211 +}
 212 +
 213 +
 214  #ifdef CONFIG_FST
 215  static int wpas_fst_update_mbie(struct wpa_supplicant *wpa_s,
 216                                 const u8 *ie, size_t ie_len)
 217 @@ -2343,6 +2390,9 @@ static int wpa_supplicant_event_associnf
 218                     get_ie(data->assoc_info.resp_ies,
 219                            data->assoc_info.resp_ies_len, WLAN_EID_VHT_CAP))
 220                         wpa_s->ieee80211ac = 1;
 221 +
 222 +               multi_ap_process_assoc_resp(wpa_s, data->assoc_info.resp_ies,
 223 +                                           data->assoc_info.resp_ies_len);
 224         }
 225         if (data->assoc_info.beacon_ies)
 226                 wpa_hexdump(MSG_DEBUG, "beacon_ies",
 227 --- a/wpa_supplicant/sme.c
 228 +++ b/wpa_supplicant/sme.c
 229 @@ -1552,6 +1552,22 @@ void sme_associate(struct wpa_supplicant
 230         }
 231  #endif /* CONFIG_OWE */
 232
 233 +       if (wpa_s->current_ssid && wpa_s->current_ssid->multi_ap_backhaul_sta) {
 234 +               size_t multi_ap_ie_len;
 235 +
 236 +               multi_ap_ie_len = add_multi_ap_ie(
 237 +                       wpa_s->sme.assoc_req_ie + wpa_s->sme.assoc_req_ie_len,
 238 +                       sizeof(wpa_s->sme.assoc_req_ie) -
 239 +                       wpa_s->sme.assoc_req_ie_len,
 240 +                       MULTI_AP_BACKHAUL_STA);
 241 +               if (multi_ap_ie_len == 0) {
 242 +                       wpa_printf(MSG_ERROR,
 243 +                                  "Multi-AP: Failed to build Multi-AP IE");
 244 +                       return;
 245 +               }
 246 +               wpa_s->sme.assoc_req_ie_len += multi_ap_ie_len;
 247 +       }
 248 +
 249         params.bssid = bssid;
 250         params.ssid = wpa_s->sme.ssid;
 251         params.ssid_len = wpa_s->sme.ssid_len;
 252 --- a/wpa_supplicant/wpa_supplicant.c
 253 +++ b/wpa_supplicant/wpa_supplicant.c
 254 @@ -2893,6 +2893,21 @@ static u8 * wpas_populate_assoc_ies(
 255         }
 256  #endif /* CONFIG_IEEE80211R */
 257
 258 +       if (ssid->multi_ap_backhaul_sta) {
 259 +               size_t multi_ap_ie_len;
 260 +
 261 +               multi_ap_ie_len = add_multi_ap_ie(wpa_ie + wpa_ie_len,
 262 +                                                 max_wpa_ie_len - wpa_ie_len,
 263 +                                                 MULTI_AP_BACKHAUL_STA);
 264 +               if (multi_ap_ie_len == 0) {
 265 +                       wpa_printf(MSG_ERROR,
 266 +                                  "Multi-AP: Failed to build Multi-AP IE");
 267 +                       os_free(wpa_ie);
 268 +                       return NULL;
 269 +               }
 270 +               wpa_ie_len += multi_ap_ie_len;
 271 +       }
 272 +
 273         params->wpa_ie = wpa_ie;
 274         params->wpa_ie_len = wpa_ie_len;
 275         params->auth_alg = algs;
 276 @@ -3377,6 +3392,9 @@ void wpa_supplicant_deauthenticate(struc
 277                 zero_addr = 1;
 278         }
 279
 280 +       if (wpa_s->enabled_4addr_mode && wpa_drv_set_4addr_mode(wpa_s, 0) == 0)
 281 +               wpa_s->enabled_4addr_mode = 0;
 282 +
 283  #ifdef CONFIG_TDLS
 284         wpa_tdls_teardown_peers(wpa_s->wpa);
 285  #endif /* CONFIG_TDLS */
 286 --- a/wpa_supplicant/wpa_supplicant.conf
 287 +++ b/wpa_supplicant/wpa_supplicant.conf
 288 @@ -1399,6 +1399,13 @@ fast_reauth=1
 289  #  2: MCS 0-9
 290  #  3: not supported
 291
 292 +# multi_ap_backhaul_sta: Multi-AP backhaul STA functionality
 293 +# 0 = normal STA (default)
 294 +# 1 = backhaul STA
 295 +# A backhaul STA sends the Multi-AP IE, fails to associate if the AP does not
 296 +# support Multi-AP, and sets 4-address mode if it does. Thus, the netdev can be
 297 +# added to a bridge to allow forwarding frames over this backhaul link.
 298 +
 299  ##### Fast Session Transfer (FST) support #####################################
 300  #
 301  # The options in this section are only available when the build configuration
 302 --- a/wpa_supplicant/wpa_supplicant_i.h
 303 +++ b/wpa_supplicant/wpa_supplicant_i.h
 304 @@ -1242,6 +1242,7 @@ struct wpa_supplicant {
 305         unsigned int disable_fils:1;
 306  #endif /* CONFIG_FILS */
 307         unsigned int ieee80211ac:1;
 308 +       unsigned int enabled_4addr_mode:1;
 309  };
 310
 311