package/network/services/hostapd/files/netifd.sh

   1 . /lib/functions/network.sh
   2
   3 wpa_supplicant_add_rate() {
   4         local var="$1"
   5         local val="$(($2 / 1000))"
   6         local sub="$((($2 / 100) % 10))"
   7         append $var "$val" ","
   8         [ $sub -gt 0 ] && append $var "."
   9 }
  10
  11 hostapd_add_rate() {
  12         local var="$1"
  13         local val="$(($2 / 100))"
  14         append $var "$val" " "
  15 }
  16
  17 hostapd_append_wep_key() {
  18         local var="$1"
  19
  20         wep_keyidx=0
  21         set_default key 1
  22         case "$key" in
  23                 [1234])
  24                         for idx in 1 2 3 4; do
  25                                 local zidx
  26                                 zidx=$(($idx - 1))
  27                                 json_get_var ckey "key${idx}"
  28                                 [ -n "$ckey" ] && \
  29                                         append $var "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N$T"
  30                         done
  31                         wep_keyidx=$((key - 1))
  32                 ;;
  33                 *)
  34                         append $var "wep_key0=$(prepare_key_wep "$key")" "$N$T"
  35                 ;;
  36         esac
  37 }
  38
  39 hostapd_add_log_config() {
  40         config_add_boolean \
  41                 log_80211 \
  42                 log_8021x \
  43                 log_radius \
  44                 log_wpa \
  45                 log_driver \
  46                 log_iapp \
  47                 log_mlme
  48
  49         config_add_int log_level
  50 }
  51
  52 hostapd_common_add_device_config() {
  53         config_add_array basic_rate
  54         config_add_array supported_rates
  55
  56         config_add_string country
  57         config_add_boolean country_ie doth
  58         config_add_string require_mode
  59
  60         hostapd_add_log_config
  61 }
  62
  63 hostapd_prepare_device_config() {
  64         local config="$1"
  65         local driver="$2"
  66
  67         local base="${config%%.conf}"
  68         local base_cfg=
  69
  70         json_get_vars country country_ie beacon_int doth require_mode
  71
  72         hostapd_set_log_options base_cfg
  73
  74         set_default country_ie 1
  75         set_default doth 1
  76
  77         [ -n "$country" ] && {
  78                 append base_cfg "country_code=$country" "$N"
  79
  80                 [ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N"
  81                 [ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
  82         }
  83         [ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N"
  84
  85         local brlist= br
  86         json_get_values basic_rate_list basic_rate
  87         for br in $basic_rate_list; do
  88                 hostapd_add_rate brlist "$br"
  89         done
  90         case "$require_mode" in
  91                 g) brlist="60 120 240" ;;
  92                 n) append base_cfg "require_ht=1" "$N";;
  93                 ac) append base_cfg "require_vht=1" "$N";;
  94         esac
  95
  96         local rlist= r
  97         json_get_values rate_list supported_rates
  98         for r in $rate_list; do
  99                 hostapd_add_rate rlist "$r"
 100         done
 101
 102         [ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 103         [ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
 104         [ -n "$beacon_int" ] && append base_cfg "beacon_int=$beacon_int" "$N"
 105
 106         cat > "$config" <<EOF
 107 driver=$driver
 108 $base_cfg
 109 EOF
 110 }
 111
 112 hostapd_common_add_bss_config() {
 113         config_add_string 'bssid:macaddr' 'ssid:string'
 114         config_add_boolean wds wmm uapsd hidden
 115
 116         config_add_int maxassoc max_inactivity
 117         config_add_boolean disassoc_low_ack isolate short_preamble
 118
 119         config_add_int \
 120                 wep_rekey eap_reauth_period \
 121                 wpa_group_rekey wpa_pair_rekey wpa_master_rekey
 122
 123         config_add_boolean rsn_preauth auth_cache
 124         config_add_int ieee80211w
 125         config_add_int eapol_version
 126
 127         config_add_string 'auth_server:host' 'server:host'
 128         config_add_string auth_secret
 129         config_add_int 'auth_port:port' 'port:port'
 130
 131         config_add_string acct_server
 132         config_add_string acct_secret
 133         config_add_int acct_port
 134
 135         config_add_string dae_client
 136         config_add_string dae_secret
 137         config_add_int dae_port
 138
 139         config_add_string nasid
 140         config_add_string ownip
 141         config_add_string iapp_interface
 142         config_add_string eap_type ca_cert client_cert identity anonymous_identity auth priv_key priv_key_pwd
 143
 144         config_add_int dynamic_vlan vlan_naming
 145         config_add_string vlan_tagged_interface vlan_bridge
 146         config_add_string vlan_file
 147
 148         config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
 149
 150         config_add_string wpa_psk_file
 151
 152         config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
 153         config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
 154
 155         config_add_boolean ieee80211r pmk_r1_push
 156         config_add_int r0_key_lifetime reassociation_deadline
 157         config_add_string mobility_domain r1_key_holder
 158         config_add_array r0kh r1kh
 159
 160         config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
 161
 162         config_add_string macfilter 'macfile:file'
 163         config_add_array 'maclist:list(macaddr)'
 164
 165         config_add_array bssid_blacklist
 166         config_add_array bssid_whitelist
 167
 168         config_add_int mcast_rate
 169         config_add_array basic_rate
 170         config_add_array supported_rates
 171 }
 172
 173 hostapd_set_bss_options() {
 174         local var="$1"
 175         local phy="$2"
 176         local vif="$3"
 177
 178         wireless_vif_parse_encryption
 179
 180         local bss_conf
 181         local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
 182
 183         json_get_vars \
 184                 wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey \
 185                 maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
 186                 wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 \
 187                 wps_device_type wps_device_name wps_manufacturer wps_pin \
 188                 macfilter ssid wmm uapsd hidden short_preamble rsn_preauth \
 189                 iapp_interface eapol_version acct_server acct_secret acct_port \
 190                 dynamic_vlan
 191
 192         set_default isolate 0
 193         set_default maxassoc 0
 194         set_default max_inactivity 0
 195         set_default short_preamble 1
 196         set_default disassoc_low_ack 1
 197         set_default hidden 0
 198         set_default wmm 1
 199         set_default uapsd 1
 200         set_default eapol_version 0
 201         set_default acct_port 1813
 202
 203         append bss_conf "ctrl_interface=/var/run/hostapd"
 204         if [ "$isolate" -gt 0 ]; then
 205                 append bss_conf "ap_isolate=$isolate" "$N"
 206         fi
 207         if [ "$maxassoc" -gt 0 ]; then
 208                 append bss_conf "max_num_sta=$maxassoc" "$N"
 209         fi
 210         if [ "$max_inactivity" -gt 0 ]; then
 211                 append bss_conf "ap_max_inactivity=$max_inactivity" "$N"
 212         fi
 213
 214         append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N"
 215         append bss_conf "preamble=$short_preamble" "$N"
 216         append bss_conf "wmm_enabled=$wmm" "$N"
 217         append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
 218         append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 219
 220         [ "$wpa" -gt 0 ] && {
 221                 [ -n "$wpa_group_rekey"  ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
 222                 [ -n "$wpa_pair_rekey"   ] && append bss_conf "wpa_ptk_rekey=$wpa_pair_rekey"    "$N"
 223                 [ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey"  "$N"
 224         }
 225
 226         [ -n "$acct_server" ] && {
 227                 append bss_conf "acct_server_addr=$acct_server" "$N"
 228                 append bss_conf "acct_server_port=$acct_port" "$N"
 229                 [ -n "$acct_secret" ] && \
 230                         append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
 231         }
 232
 233         local vlan_possible=""
 234
 235         case "$auth_type" in
 236                 none)
 237                         wps_possible=1
 238                         # Here we make the assumption that if we're in open mode
 239                         # with WPS enabled, we got to be in unconfigured state.
 240                         wps_not_configured=1
 241                 ;;
 242                 psk)
 243                         json_get_vars key wpa_psk_file
 244                         if [ ${#key} -lt 8 ]; then
 245                                 wireless_setup_vif_failed INVALID_WPA_PSK
 246                                 return 1
 247                         elif [ ${#key} -eq 64 ]; then
 248                                 append bss_conf "wpa_psk=$key" "$N"
 249                         else
 250                                 append bss_conf "wpa_passphrase=$key" "$N"
 251                         fi
 252                         [ -n "$wpa_psk_file" ] && {
 253                                 [ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
 254                                 append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
 255                         }
 256                         [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
 257
 258                         wps_possible=1
 259                         append wpa_key_mgmt "WPA-PSK"
 260                 ;;
 261                 eap)
 262                         json_get_vars \
 263                                 auth_server auth_secret auth_port \
 264                                 dae_client dae_secret dae_port \
 265                                 ownip \
 266                                 eap_reauth_period
 267
 268                         # radius can provide VLAN ID for clients
 269                         vlan_possible=1
 270
 271                         # legacy compatibility
 272                         [ -n "$auth_server" ] || json_get_var auth_server server
 273                         [ -n "$auth_port" ] || json_get_var auth_port port
 274                         [ -n "$auth_secret" ] || json_get_var auth_secret key
 275
 276                         set_default auth_port 1812
 277                         set_default dae_port 3799
 278
 279
 280                         append bss_conf "auth_server_addr=$auth_server" "$N"
 281                         append bss_conf "auth_server_port=$auth_port" "$N"
 282                         append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
 283
 284                         [ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
 285
 286                         [ -n "$dae_client" -a -n "$dae_secret" ] && {
 287                                 append bss_conf "radius_das_port=$dae_port" "$N"
 288                                 append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
 289                         }
 290
 291                         [ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
 292                         append bss_conf "eapol_key_index_workaround=1" "$N"
 293                         append bss_conf "ieee8021x=1" "$N"
 294                         append wpa_key_mgmt "WPA-EAP"
 295
 296                         [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
 297                 ;;
 298                 wep)
 299                         local wep_keyidx=0
 300                         json_get_vars key
 301                         hostapd_append_wep_key bss_conf
 302                         append bss_conf "wep_default_key=$wep_keyidx" "$N"
 303                         [ -n "$wep_rekey" ] && append bss_conf "wep_rekey_period=$wep_rekey" "$N"
 304                 ;;
 305         esac
 306
 307         local auth_algs=$((($auth_mode_shared << 1) | $auth_mode_open))
 308         append bss_conf "auth_algs=${auth_algs:-1}" "$N"
 309         append bss_conf "wpa=$wpa" "$N"
 310         [ -n "$wpa_pairwise" ] && append bss_conf "wpa_pairwise=$wpa_pairwise" "$N"
 311
 312         set_default wps_pushbutton 0
 313         set_default wps_label 0
 314         set_default wps_pbc_in_m1 0
 315
 316         config_methods=
 317         [ "$wps_pushbutton" -gt 0 ] && append config_methods push_button
 318         [ "$wps_label" -gt 0 ] && append config_methods label
 319
 320         [ -n "$wps_possible" -a -n "$config_methods" ] && {
 321                 set_default ext_registrar 0
 322                 set_default wps_device_type "6-0050F204-1"
 323                 set_default wps_device_name "Lede AP"
 324                 set_default wps_manufacturer "www.lede-project.org"
 325
 326                 wps_state=2
 327                 [ -n "$wps_configured" ] && wps_state=1
 328
 329                 [ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N"
 330
 331                 append bss_conf "eap_server=1" "$N"
 332                 [ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N"
 333                 append bss_conf "wps_state=$wps_state" "$N"
 334                 append bss_conf "ap_setup_locked=0" "$N"
 335                 append bss_conf "device_type=$wps_device_type" "$N"
 336                 append bss_conf "device_name=$wps_device_name" "$N"
 337                 append bss_conf "manufacturer=$wps_manufacturer" "$N"
 338                 append bss_conf "config_methods=$config_methods" "$N"
 339                 [ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
 340         }
 341
 342         append bss_conf "ssid=$ssid" "$N"
 343         [ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge" "$N"
 344         [ -n "$iapp_interface" ] && {
 345                 local ifname
 346                 network_get_device ifname "$iapp_interface" || ifname = "$iapp_interface"
 347                 append bss_conf "iapp_interface=$ifname" "$N"
 348         }
 349
 350         if [ "$wpa" -ge "1" ]; then
 351                 json_get_vars nasid ieee80211r
 352                 set_default ieee80211r 0
 353                 [ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
 354
 355                 if [ "$ieee80211r" -gt "0" ]; then
 356                         json_get_vars mobility_domain r0_key_lifetime r1_key_holder \
 357                         reassociation_deadline pmk_r1_push
 358                         json_get_values r0kh r0kh
 359                         json_get_values r1kh r1kh
 360
 361                         set_default mobility_domain "4f57"
 362                         set_default r0_key_lifetime 10000
 363                         set_default r1_key_holder "00004f577274"
 364                         set_default reassociation_deadline 1000
 365                         set_default pmk_r1_push 0
 366
 367                         append bss_conf "mobility_domain=$mobility_domain" "$N"
 368                         append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
 369                         append bss_conf "r1_key_holder=$r1_key_holder" "$N"
 370                         append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
 371                         append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
 372
 373                         for kh in $r0kh; do
 374                                 append bss_conf "r0kh=${kh//,/ }" "$N"
 375                         done
 376                         for kh in $r1kh; do
 377                                 append bss_conf "r1kh=${kh//,/ }" "$N"
 378                         done
 379
 380                         [ "$wpa_key_mgmt" != "${wpa_key_mgmt/EAP/}" ] && append wpa_key_mgmt "FT-EAP"
 381                         [ "$wpa_key_mgmt" != "${wpa_key_mgmt/PSK/}" ] && append wpa_key_mgmt "FT-PSK"
 382                 fi
 383
 384                 [ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
 385         fi
 386
 387         if [ "$wpa" -ge "2" ]; then
 388                 if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
 389                         set_default auth_cache 1
 390                         append bss_conf "rsn_preauth=1" "$N"
 391                         append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N"
 392                 else
 393                         set_default auth_cache 0
 394                 fi
 395
 396                 append bss_conf "okc=$auth_cache" "$N"
 397                 [ "$auth_cache" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N"
 398
 399                 # RSN -> allow management frame protection
 400                 json_get_var ieee80211w ieee80211w
 401                 case "$ieee80211w" in
 402                         [012])
 403                                 json_get_vars ieee80211w_max_timeout ieee80211w_retry_timeout
 404                                 append bss_conf "ieee80211w=$ieee80211w" "$N"
 405                                 [ "$ieee80211w" -gt "0" ] && {
 406                                         [ -n "$ieee80211w_max_timeout" ] && \
 407                                                 append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
 408                                         [ -n "$ieee80211w_retry_timeout" ] && \
 409                                                 append bss_conf "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
 410                                 }
 411                         ;;
 412                 esac
 413         fi
 414
 415         _macfile="/var/run/hostapd-$ifname.maclist"
 416         case "$macfilter" in
 417                 allow)
 418                         append bss_conf "macaddr_acl=1" "$N"
 419                         append bss_conf "accept_mac_file=$_macfile" "$N"
 420                         # accept_mac_file can be used to set MAC to VLAN ID mapping
 421                         vlan_possible=1
 422                 ;;
 423                 deny)
 424                         append bss_conf "macaddr_acl=0" "$N"
 425                         append bss_conf "deny_mac_file=$_macfile" "$N"
 426                 ;;
 427                 *)
 428                         _macfile=""
 429                 ;;
 430         esac
 431
 432         [ -n "$_macfile" ] && {
 433                 json_get_vars macfile
 434                 json_get_values maclist maclist
 435
 436                 rm -f "$_macfile"
 437                 (
 438                         for mac in $maclist; do
 439                                 echo "$mac"
 440                         done
 441                         [ -n "$macfile" -a -f "$macfile" ] && cat "$macfile"
 442                 ) > "$_macfile"
 443         }
 444
 445         [ -n "$vlan_possible" -a -n "$dynamic_vlan" ] && {
 446                 json_get_vars vlan_naming vlan_tagged_interface vlan_bridge vlan_file
 447                 set_default vlan_naming 1
 448                 append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
 449                 append bss_conf "vlan_naming=$vlan_naming" "$N"
 450                 [ -n "$vlan_bridge" ] && \
 451                         append bss_conf "vlan_bridge=$vlan_bridge" "$N"
 452                 [ -n "$vlan_tagged_interface" ] && \
 453                         append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
 454                 [ -n "$vlan_file" ] && {
 455                         [ -e "$vlan_file" ] || touch "$vlan_file"
 456                         append bss_conf "vlan_file=$vlan_file" "$N"
 457                 }
 458         }
 459
 460         append "$var" "$bss_conf" "$N"
 461         return 0
 462 }
 463
 464 hostapd_set_log_options() {
 465         local var="$1"
 466
 467         local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
 468         json_get_vars log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
 469
 470         set_default log_level 2
 471         set_default log_80211  1
 472         set_default log_8021x  1
 473         set_default log_radius 1
 474         set_default log_wpa    1
 475         set_default log_driver 1
 476         set_default log_iapp   1
 477         set_default log_mlme   1
 478
 479         local log_mask=$(( \
 480                 ($log_80211  << 0) | \
 481                 ($log_8021x  << 1) | \
 482                 ($log_radius << 2) | \
 483                 ($log_wpa    << 3) | \
 484                 ($log_driver << 4) | \
 485                 ($log_iapp   << 5) | \
 486                 ($log_mlme   << 6)   \
 487         ))
 488
 489         append "$var" "logger_syslog=$log_mask" "$N"
 490         append "$var" "logger_syslog_level=$log_level" "$N"
 491         append "$var" "logger_stdout=$log_mask" "$N"
 492         append "$var" "logger_stdout_level=$log_level" "$N"
 493
 494         return 0
 495 }
 496
 497 _wpa_supplicant_common() {
 498         local ifname="$1"
 499
 500         _rpath="/var/run/wpa_supplicant"
 501         _config="${_rpath}-$ifname.conf"
 502 }
 503
 504 wpa_supplicant_teardown_interface() {
 505         _wpa_supplicant_common "$1"
 506         rm -rf "$_rpath/$1" "$_config"
 507 }
 508
 509 wpa_supplicant_prepare_interface() {
 510         local ifname="$1"
 511         _w_driver="$2"
 512
 513         _wpa_supplicant_common "$1"
 514
 515         json_get_vars mode wds
 516
 517         [ -n "$network_bridge" ] && {
 518                 fail=
 519                 case "$mode" in
 520                         adhoc)
 521                                 fail=1
 522                         ;;
 523                         sta)
 524                                 [ "$wds" = 1 ] || fail=1
 525                         ;;
 526                 esac
 527
 528                 [ -n "$fail" ] && {
 529                         wireless_setup_vif_failed BRIDGE_NOT_ALLOWED
 530                         return 1
 531                 }
 532         }
 533
 534         local ap_scan=
 535
 536         _w_mode="$mode"
 537         _w_modestr=
 538
 539         [[ "$mode" = adhoc ]] && {
 540                 ap_scan="ap_scan=2"
 541
 542                 _w_modestr="mode=1"
 543         }
 544
 545         local country_str=
 546         [ -n "$country" ] && {
 547                 country_str="country=$country"
 548         }
 549
 550         wpa_supplicant_teardown_interface "$ifname"
 551         cat > "$_config" <<EOF
 552 $ap_scan
 553 $country_str
 554 EOF
 555         return 0
 556 }
 557
 558 wpa_supplicant_add_network() {
 559         local ifname="$1"
 560
 561         _wpa_supplicant_common "$1"
 562         wireless_vif_parse_encryption
 563
 564         json_get_vars \
 565                 ssid bssid key \
 566                 basic_rate mcast_rate \
 567                 ieee80211w ieee80211r
 568
 569         set_default ieee80211r 0
 570
 571         local key_mgmt='NONE'
 572         local enc_str=
 573         local network_data=
 574         local T="       "
 575
 576         local wpa_key_mgmt="WPA-PSK"
 577         local scan_ssid="scan_ssid=1"
 578         local freq
 579
 580         [ "$ieee80211r" -gt 0 ] && wpa_key_mgmt="FT-PSK $wpa_key_mgmt"
 581
 582         [[ "$_w_mode" = "adhoc" ]] && {
 583                 append network_data "mode=1" "$N$T"
 584                 [ -n "$channel" ] && {
 585                         freq="$(get_freq "$phy" "$channel")"
 586                         append network_data "fixed_freq=1" "$N$T"
 587                         append network_data "frequency=$freq" "$N$T"
 588                 }
 589
 590                 scan_ssid="scan_ssid=0"
 591
 592                 [ "$_w_driver" = "nl80211" ] || wpa_key_mgmt="WPA-NONE"
 593         }
 594
 595         [[ "$_w_mode" = "mesh" ]] && {
 596                 json_get_vars mesh_id
 597                 ssid="${mesh_id}"
 598
 599                 append network_data "mode=5" "$N$T"
 600                 [ -n "$channel" ] && {
 601                         freq="$(get_freq "$phy" "$channel")"
 602                         append network_data "frequency=$freq" "$N$T"
 603                 }
 604                 wpa_key_mgmt="SAE"
 605                 scan_ssid=""
 606         }
 607
 608         [[ "$_w_mode" = "adhoc" -o "$_w_mode" = "mesh" ]] && append network_data "$_w_modestr" "$N$T"
 609
 610         case "$auth_type" in
 611                 none) ;;
 612                 wep)
 613                         local wep_keyidx=0
 614                         hostapd_append_wep_key network_data
 615                         append network_data "wep_tx_keyidx=$wep_keyidx" "$N$T"
 616                 ;;
 617                 psk)
 618                         local passphrase
 619
 620                         key_mgmt="$wpa_key_mgmt"
 621                         if [ ${#key} -eq 64 ]; then
 622                                 passphrase="psk=${key}"
 623                         else
 624                                 passphrase="psk=\"${key}\""
 625                         fi
 626                         append network_data "$passphrase" "$N$T"
 627                 ;;
 628                 eap)
 629                         key_mgmt='WPA-EAP'
 630                         [ "$ieee80211r" -gt 0 ] && key_mgmt="FT-EAP $key_mgmt"
 631
 632                         json_get_vars eap_type identity anonymous_identity ca_cert
 633                         [ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
 634                         [ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
 635                         [ -n "$anonymous_identity" ] && append network_data "anonymous_identity=\"$anonymous_identity\"" "$N$T"
 636                         case "$eap_type" in
 637                                 tls)
 638                                         json_get_vars client_cert priv_key priv_key_pwd
 639                                         append network_data "client_cert=\"$client_cert\"" "$N$T"
 640                                         append network_data "private_key=\"$priv_key\"" "$N$T"
 641                                         append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
 642                                 ;;
 643                                 fast|peap|ttls)
 644                                         json_get_vars auth password ca_cert2 client_cert2 priv_key2 priv_key2_pwd
 645                                         set_default auth MSCHAPV2
 646
 647                                         if [ "$auth" = "EAP-TLS" ]; then
 648                                                 [ -n "$ca_cert2" ] &&
 649                                                         append network_data "ca_cert2=\"$ca_cert2\"" "$N$T"
 650                                                 append network_data "client_cert2=\"$client_cert2\"" "$N$T"
 651                                                 append network_data "private_key2=\"$priv_key2\"" "$N$T"
 652                                                 append network_data "private_key2_passwd=\"$priv_key2_pwd\"" "$N$T"
 653                                         else
 654                                                 append network_data "password=\"$password\"" "$N$T"
 655                                         fi
 656
 657                                         phase2proto="auth="
 658                                         case "$auth" in
 659                                                 "auth"*)
 660                                                         phase2proto=""
 661                                                 ;;
 662                                                 "EAP-"*)
 663                                                         auth="$(echo $auth | cut -b 5- )"
 664                                                         [ "$eap_type" = "ttls" ] &&
 665                                                                 phase2proto="autheap="
 666                                                 ;;
 667                                         esac
 668                                         append network_data "phase2=\"$phase2proto$auth\"" "$N$T"
 669                                 ;;
 670                         esac
 671                         append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T"
 672                 ;;
 673         esac
 674
 675         [ "$mode" = mesh ] || {
 676                 case "$wpa" in
 677                         1)
 678                                 append network_data "proto=WPA" "$N$T"
 679                         ;;
 680                         2)
 681                                 append network_data "proto=RSN" "$N$T"
 682                         ;;
 683                 esac
 684
 685                 case "$ieee80211w" in
 686                         [012])
 687                                 [ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T"
 688                         ;;
 689                 esac
 690         }
 691         local beacon_int brates mrate
 692         [ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
 693         [ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
 694
 695         local bssid_blacklist bssid_whitelist
 696         json_get_values bssid_blacklist bssid_blacklist
 697         json_get_values bssid_whitelist bssid_whitelist
 698
 699         [ -n "$bssid_blacklist" ] && append network_data "bssid_blacklist=$bssid_blacklist" "$N$T"
 700         [ -n "$bssid_whitelist" ] && append network_data "bssid_whitelist=$bssid_whitelist" "$N$T"
 701
 702         [ -n "$basic_rate" ] && {
 703                 local br rate_list=
 704                 for br in $basic_rate; do
 705                         wpa_supplicant_add_rate rate_list "$br"
 706                 done
 707                 [ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T"
 708         }
 709
 710         [ -n "$mcast_rate" ] && {
 711                 local mc_rate=
 712                 wpa_supplicant_add_rate mc_rate "$mcast_rate"
 713                 append network_data "mcast_rate=$mc_rate" "$N$T"
 714         }
 715
 716         local ht_str
 717         [[ "$_w_mode" = adhoc ]] || ibss_htmode=
 718         [ -n "$ibss_htmode" ] && append network_data "htmode=$ibss_htmode" "$N$T"
 719
 720         cat >> "$_config" <<EOF
 721 network={
 722         $scan_ssid
 723         ssid="$ssid"
 724         key_mgmt=$key_mgmt
 725         $network_data
 726 }
 727 EOF
 728         return 0
 729 }
 730
 731 wpa_supplicant_run() {
 732         local ifname="$1"; shift
 733
 734         _wpa_supplicant_common "$ifname"
 735
 736         /usr/sbin/wpa_supplicant -B \
 737                 ${network_bridge:+-b $network_bridge} \
 738                 -P "/var/run/wpa_supplicant-${ifname}.pid" \
 739                 -D ${_w_driver:-wext} \
 740                 -i "$ifname" \
 741                 -c "$_config" \
 742                 -C "$_rpath" \
 743                 "$@"
 744
 745         ret="$?"
 746         wireless_add_process "$(cat "/var/run/wpa_supplicant-${ifname}.pid")" /usr/sbin/wpa_supplicant 1
 747
 748         [ "$ret" != 0 ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
 749
 750         return $ret
 751 }
 752
 753 hostapd_common_cleanup() {
 754         killall hostapd wpa_supplicant meshd-nl80211
 755 }