2 append DRIVERS "atheros"
7 local adhoc ahdemo sta ap monitor
9 config_get vifs "$device" vifs
12 config_get ifname "$vif" ifname
13 config_set "$vif" ifname "${ifname:-ath}"
15 config_get mode "$vif" mode
17 adhoc|ahdemo|sta|ap|monitor)
21 config_get ssid "$vif" ssid
22 [ -z "$ssid" ] && continue
24 config_set "$vif" wds 1
25 config_set "$vif" mode sta
28 ${addr:+append $mode "$vif"}
30 *) echo "$device($vif): Invalid mode, ignored."; continue;;
34 case "${adhoc:+1}:${sta:+1}:${ap:+1}" in
35 # valid mode combinations
38 :1:1)config_set "$device" nosbeacon 1;; # AP+STA, can't use beacon timers for STA
42 *) echo "$device: Invalid mode combination in config"; return 1;;
45 config_set "$device" vifs "${sta:+$sta }${ap:+$ap }${adhoc:+$adhoc }${ahdemo:+$ahdemo }${wds:+$wds }${monitor:+$monitor}"
52 set_wifi_down "$device"
57 grep "$device" "$dev/%parent" >/dev/null 2>/dev/null && {
58 [ -f "/var/run/wifi-${dev}.pid" ] &&
59 kill "$(cat "/var/run/wifi-${dev}.pid")"
62 wlanconfig "$dev" destroy
71 config_get regdomain "$device" regdomain
72 [ -n "$regdomain" ] && echo "$regdomain" > /proc/sys/dev/$device/regdomain
74 config_get country "$device" country
75 [ -z "$country" ] && country="0"
76 echo "$country" > /proc/sys/dev/$device/countrycode
78 config_get_bool outdoor "$device" outdoor "0"
79 echo "$outdoor" > /proc/sys/dev/$device/outdoor
81 config_get channel "$device" channel
82 config_get vifs "$device" vifs
83 config_get txpower "$device" txpower
85 [ auto = "$channel" ] && channel=0
87 config_get_bool antdiv "$device" diversity
88 config_get antrx "$device" rxantenna
89 config_get anttx "$device" txantenna
90 config_get_bool softled "$device" softled 1
92 devname="$(cat /proc/sys/dev/$device/dev_name)"
95 NanoStation2) antgpio=7;;
96 NanoStation5) antgpio=1;;
98 if [ -n "$antgpio" ]; then
100 config_get antenna "$device" antenna
102 external) antdiv=0; antrx=1; anttx=1 ;;
103 horizontal) antdiv=0; antrx=1; anttx=1 ;;
104 vertical) antdiv=0; antrx=2; anttx=2 ;;
105 auto) antdiv=1; antrx=0; anttx=0 ;;
108 [ -x "$(which gpioctl 2>/dev/null)" ] || antenna=
110 horizontal|vertical|auto)
111 gpioctl "dirout" "$antgpio" >/dev/null 2>&1
112 gpioctl "set" "$antgpio" >/dev/null 2>&1
115 gpioctl "dirout" "$antgpio" >/dev/null 2>&1
116 gpioctl "clear" "$antgpio" >/dev/null 2>&1
121 [ -n "$antdiv" ] && sysctl -w dev."$device".diversity="$antdiv" >&-
122 [ -n "$antrx" ] && sysctl -w dev."$device".rxantenna="$antrx" >&-
123 [ -n "$anttx" ] && sysctl -w dev."$device".txantenna="$anttx" >&-
124 [ -n "$softled" ] && sysctl -w dev."$device".softled="$softled" >&-
126 config_get distance "$device" distance
127 [ -n "$distance" ] && sysctl -w dev."$device".distance="$distance" >&-
131 local start_hostapd vif_txpower
133 config_get ifname "$vif" ifname
134 config_get enc "$vif" encryption
135 config_get eap_type "$vif" eap_type
136 config_get mode "$vif" mode
139 sta) config_get nosbeacon "$device" nosbeacon;;
140 adhoc) config_get nosbeacon "$vif" sw_merge;;
143 ifname=$(wlanconfig "$ifname" create wlandev "$device" wlanmode "$mode" ${nosbeacon:+nosbeacon})
145 echo "enable_atheros($device): Failed to set up $mode vif $ifname" >&2
148 config_set "$vif" ifname "$ifname"
150 # only need to change freq band and channel on the first vif
151 [ "$first" = 1 ] && {
152 config_get hwmode "$device" hwmode
153 [ -z "$hwmode" ] && config_get hwmode "$device" mode
159 *g) hwmode=11g; pureg=1;;
167 iwpriv "$ifname" mode "$hwmode"
168 iwpriv "$ifname" pureg "$pureg"
170 iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null
173 config_get_bool hidden "$vif" hidden 0
174 iwpriv "$ifname" hide_ssid "$hidden"
176 config_get ff "$vif" ff
177 if [ -n "$ff" ]; then
178 iwpriv "$ifname" ff "$ff"
181 config_get wds "$vif" wds
183 1|on|enabled) wds=1;;
186 iwpriv "$ifname" wds "$wds"
188 [ "$mode" = ap -a "$wds" = 1 ] && {
189 config_get_bool wdssep "$vif" wdssep 1
190 [ -n "$wdssep" ] && iwpriv "$ifname" wdssep "$wdssep"
195 for idx in 1 2 3 4; do
196 config_get key "$vif" "key${idx}"
197 iwconfig "$ifname" enc "[$idx]" "${key:-off}"
199 config_get key "$vif" key
202 [1234]) iwconfig "$ifname" enc "[$key]";;
203 *) iwconfig "$ifname" enc "$key";;
208 config_get key "$vif" key
214 config_get addr "$vif" bssid
216 iwconfig "$ifname" ap "$addr"
220 config_get ssid "$vif" ssid
222 config_get_bool bgscan "$vif" bgscan
223 [ -n "$bgscan" ] && iwpriv "$ifname" bgscan "$bgscan"
225 config_get_bool antdiv "$device" diversity
226 config_get antrx "$device" rxantenna
227 config_get anttx "$device" txantenna
228 config_get_bool softled "$device" softled 1
230 devname="$(cat /proc/sys/dev/$device/dev_name)"
233 NanoStation2) antgpio=7;;
234 NanoStation5) antgpio=1;;
236 if [ -n "$antgpio" ]; then
238 config_get antenna "$device" antenna
240 external) antdiv=0; antrx=1; anttx=1 ;;
241 horizontal) antdiv=0; antrx=1; anttx=1 ;;
242 vertical) antdiv=0; antrx=2; anttx=2 ;;
243 auto) antdiv=1; antrx=0; anttx=0 ;;
246 [ -x "$(which gpioctl 2>/dev/null)" ] || antenna=
248 horizontal|vertical|auto)
249 gpioctl "dirout" "$antgpio" >/dev/null 2>&1
250 gpioctl "set" "$antgpio" >/dev/null 2>&1
253 gpioctl "dirout" "$antgpio" >/dev/null 2>&1
254 gpioctl "clear" "$antgpio" >/dev/null 2>&1
259 [ -n "$antdiv" ] && sysctl -w dev."$device".diversity="$antdiv" >&-
260 [ -n "$antrx" ] && sysctl -w dev."$device".rxantenna="$antrx" >&-
261 [ -n "$anttx" ] && sysctl -w dev."$device".txantenna="$anttx" >&-
262 [ -n "$softled" ] && sysctl -w dev."$device".softled="$softled" >&-
264 config_get distance "$device" distance
265 [ -n "$distance" ] && sysctl -w dev."$device".distance="$distance" >&-
267 config_get rate "$vif" rate
268 [ -n "$rate" ] && iwconfig "$ifname" rate "${rate%%.*}"
270 config_get mcast_rate "$vif" mcast_rate
271 [ -n "$mcast_rate" ] && iwpriv "$ifname" mcast_rate "${mcast_rate%%.*}"
273 config_get frag "$vif" frag
274 [ -n "$frag" ] && iwconfig "$ifname" frag "${frag%%.*}"
276 config_get rts "$vif" rts
277 [ -n "$rts" ] && iwconfig "$ifname" rts "${rts%%.*}"
279 config_get_bool comp "$vif" compression
280 [ -n "$comp" ] && iwpriv "$ifname" compression "$comp"
282 config_get_bool minrate "$vif" minrate
283 [ -n "$minrate" ] && iwpriv "$ifname" minrate "$minrate"
285 config_get_bool maxrate "$vif" maxrate
286 [ -n "$maxrate" ] && iwpriv "$ifname" maxrate "$maxrate"
288 config_get_bool burst "$vif" bursting
289 [ -n "$burst" ] && iwpriv "$ifname" burst "$burst"
291 config_get_bool wmm "$vif" wmm
292 [ -n "$wmm" ] && iwpriv "$ifname" wmm "$wmm"
294 config_get_bool xr "$vif" xr
295 [ -n "$xr" ] && iwpriv "$ifname" xr "$xr"
297 config_get_bool ar "$vif" ar
298 [ -n "$ar" ] && iwpriv "$ifname" ar "$ar"
300 config_get_bool beacon_power "$vif" beacon_power
301 [ -n "$beacon_power" ] && iwpriv "$ifname" beacon_pwr "$beacon_power"
303 config_get_bool doth "$vif" doth 0
304 [ -n "$doth" ] && iwpriv "$ifname" doth "$doth"
306 config_get_bool probereq "$vif" probereq
307 [ -n "$probereq" ] && iwpriv "$ifname" probereq "$probereq"
309 config_get maclist "$vif" maclist
310 [ -n "$maclist" ] && {
312 iwpriv "$ifname" maccmd 3
313 for mac in $maclist; do
314 iwpriv "$ifname" addmac "$mac"
318 config_get macpolicy "$vif" macpolicy
321 iwpriv "$ifname" maccmd 1
324 iwpriv "$ifname" maccmd 2
327 # default deny policy if mac list exists
328 [ -n "$maclist" ] && iwpriv "$ifname" maccmd 2
332 ifconfig "$ifname" up
335 net_cfg="$(find_net_config "$vif")"
336 [ -z "$net_cfg" ] || {
337 bridge="$(bridge_interface "$net_cfg")"
338 config_set "$vif" bridge "$bridge"
339 start_net "$ifname" "$net_cfg"
342 iwconfig "$ifname" essid on
343 iwconfig "$ifname" essid "$ssid"
345 set_wifi_up "$vif" "$ifname"
347 # TXPower settings only work if device is up already
348 # while atheros hardware theoretically is capable of per-vif (even per-packet) txpower
349 # adjustment it does not work with the current atheros hal/madwifi driver
351 config_get vif_txpower "$vif" txpower
352 # use vif_txpower (from wifi-iface) instead of txpower (from wifi-device) if
353 # the latter doesn't exist
354 txpower="${txpower:-$vif_txpower}"
355 [ -z "$txpower" ] || iwconfig "$ifname" txpower "${txpower%%.*}"
359 config_get_bool isolate "$vif" isolate 0
360 iwpriv "$ifname" ap_bridge "$((isolate^1))"
362 if [ -n "$start_hostapd" ] && eval "type hostapd_setup_vif" 2>/dev/null >/dev/null; then
363 hostapd_setup_vif "$vif" madwifi || {
364 echo "enable_atheros($device): Failed to set up hostapd for interface $ifname" >&2
365 # make sure this wifi interface won't accidentally stay open without encryption
366 ifconfig "$ifname" down
367 wlanconfig "$ifname" destroy
373 if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
374 wpa_supplicant_setup_vif "$vif" madwifi || {
375 echo "enable_atheros($device): Failed to set up wpa_supplicant for interface $ifname" >&2
376 ifconfig "$ifname" down
377 wlanconfig "$ifname" destroy
391 for dev in $(ls -d wifi* 2>&-); do
392 config_get type "$dev" type
393 devname="$(cat /proc/sys/dev/$dev/dev_name)"
397 # Ubiquiti NanoStation features
398 option antenna auto # (auto|horizontal|vertical|external)
402 [ "$type" = atheros ] && continue
404 config wifi-device $dev
408 # REMOVE THIS LINE TO ENABLE WIFI:
416 option encryption none