2 # Copyright (C) 2006-2012 OpenWrt.org
4 # This is free software, licensed under the GNU General Public License v2.
5 # See /LICENSE for more information.
8 OTHER_MENU:=Other modules
10 WATCHDOG_DIR:=watchdog
13 define KernelPackage/bluetooth
14 SUBMENU:=$(OTHER_MENU)
15 TITLE:=Bluetooth support
16 DEPENDS:=@USB_SUPPORT +kmod-usb-core
23 CONFIG_BLUEZ_HCIUART \
34 CONFIG_BT_HCIUART_H4 \
37 $(call AddDepends/crc16)
38 $(call AddDepends/hid)
39 $(call AddDepends/rfkill)
41 $(LINUX_DIR)/net/bluetooth/bluetooth.ko \
42 $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.ko \
43 $(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
44 $(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
45 $(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
46 $(LINUX_DIR)/drivers/bluetooth/btusb.ko
47 AUTOLOAD:=$(call AutoLoad,90,bluetooth rfcomm bnep hidp hci_uart btusb)
50 define KernelPackage/bluetooth/description
51 Kernel support for Bluetooth devices
54 $(eval $(call KernelPackage,bluetooth))
57 define KernelPackage/bluetooth-hci-h4p
58 SUBMENU:=$(OTHER_MENU)
59 TITLE:=HCI driver with H4 Nokia extensions
60 DEPENDS:=@TARGET_omap24xx +kmod-bluetooth
61 KCONFIG:=CONFIG_BT_HCIH4P
62 FILES:=$(LINUX_DIR)/drivers/bluetooth/hci_h4p/hci_h4p.ko
63 AUTOLOAD:=$(call AutoLoad,91,hci_h4p)
66 define KernelPackage/bluetooth-hci-h4p/description
67 HCI driver with H4 Nokia extensions
70 $(eval $(call KernelPackage,bluetooth-hci-h4p))
73 define KernelPackage/eeprom-93cx6
74 SUBMENU:=$(OTHER_MENU)
75 TITLE:=EEPROM 93CX6 support
76 KCONFIG:=CONFIG_EEPROM_93CX6
77 FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.ko
78 AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
81 define KernelPackage/eeprom-93cx6/description
82 Kernel module for EEPROM 93CX6 support
85 $(eval $(call KernelPackage,eeprom-93cx6))
88 define KernelPackage/eeprom-at24
89 SUBMENU:=$(OTHER_MENU)
90 TITLE:=EEPROM AT24 support
91 KCONFIG:=CONFIG_EEPROM_AT24
92 DEPENDS:=+kmod-i2c-core
93 FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
94 AUTOLOAD:=$(call AutoLoad,60,at24)
97 define KernelPackage/eeprom-at24/description
98 Kernel module for most I2C EEPROMs
101 $(eval $(call KernelPackage,eeprom-at24))
104 define KernelPackage/eeprom-at25
105 SUBMENU:=$(OTHER_MENU)
106 TITLE:=EEPROM AT25 support
107 KCONFIG:=CONFIG_EEPROM_AT25
108 FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
109 AUTOLOAD:=$(call AutoLoad,61,at25)
112 define KernelPackage/eeprom-at25/description
113 Kernel module for most SPI EEPROMs
116 $(eval $(call KernelPackage,eeprom-at25))
119 define KernelPackage/gpio-dev
120 SUBMENU:=$(OTHER_MENU)
121 TITLE:=Generic GPIO char device support
122 DEPENDS:=@GPIO_SUPPORT
123 KCONFIG:=CONFIG_GPIO_DEVICE
124 FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.ko
125 AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
128 define KernelPackage/gpio-dev/description
129 Kernel module to allows control of GPIO pins using a character device.
132 $(eval $(call KernelPackage,gpio-dev))
135 define KernelPackage/gpio-nxp-74hc164
136 SUBMENU:=$(OTHER_MENU)
137 TITLE:=NXP 74HC164 GPIO expander support
138 DEPENDS:=@TARGET_brcm63xx
139 KCONFIG:=CONFIG_GPIO_NXP_74HC164
140 FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
141 AUTOLOAD:=$(call AutoLoad,99,nxp_74hc164)
144 define KernelPackage/gpio-nxp-74hc164/description
145 Kernel module for NXP 74HC164 GPIO expander
148 $(eval $(call KernelPackage,gpio-nxp-74hc164))
150 define KernelPackage/hid
151 SUBMENU:=$(OTHER_MENU)
154 FILES:=$(LINUX_DIR)/drivers/hid/hid.ko
155 AUTOLOAD:=$(call AutoLoad,61,hid)
156 $(call AddDepends/input,+kmod-input-evdev)
159 define KernelPackage/hid/description
160 Kernel modules for HID devices
163 $(eval $(call KernelPackage,hid))
166 define KernelPackage/input-core
167 SUBMENU:=$(OTHER_MENU)
168 TITLE:=Input device core
169 KCONFIG:=CONFIG_INPUT
170 FILES:=$(LINUX_DIR)/drivers/input/input-core.ko
171 AUTOLOAD:=$(call AutoLoad,19,input-core)
174 define KernelPackage/input-core/description
175 Kernel modules for support of input device
178 $(eval $(call KernelPackage,input-core))
181 define KernelPackage/input-evdev
182 SUBMENU:=$(OTHER_MENU)
183 TITLE:=Input event device
184 KCONFIG:=CONFIG_INPUT_EVDEV
185 FILES:=$(LINUX_DIR)/drivers/input/evdev.ko
186 AUTOLOAD:=$(call AutoLoad,60,evdev)
187 $(call AddDepends/input)
190 define KernelPackage/input-evdev/description
191 Kernel modules for support of input device events
194 $(eval $(call KernelPackage,input-evdev))
197 define KernelPackage/input-gpio-buttons
198 SUBMENU:=$(OTHER_MENU)
199 TITLE:=Polled GPIO buttons input device
200 DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
202 CONFIG_INPUT_GPIO_BUTTONS \
204 FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.ko
205 AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
208 define KernelPackage/input-gpio-buttons/description
209 Kernel module for support polled GPIO buttons input device
212 $(eval $(call KernelPackage,input-gpio-buttons))
215 define KernelPackage/input-gpio-keys
216 SUBMENU:=$(OTHER_MENU)
217 TITLE:=GPIO key support
218 DEPENDS:= @GPIO_SUPPORT
220 CONFIG_KEYBOARD_GPIO \
221 CONFIG_INPUT_KEYBOARD=y
222 FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.ko
223 AUTOLOAD:=$(call AutoLoad,60,gpio_keys)
224 $(call AddDepends/input)
227 define KernelPackage/input-gpio-keys/description
228 This driver implements support for buttons connected
229 to GPIO pins of various CPUs (and some other chips).
232 $(eval $(call KernelPackage,input-gpio-keys))
235 define KernelPackage/input-gpio-keys-polled
236 SUBMENU:=$(OTHER_MENU)
237 TITLE:=Polled GPIO key support
238 DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
240 CONFIG_KEYBOARD_GPIO_POLLED \
241 CONFIG_INPUT_KEYBOARD=y
242 FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys_polled.ko
243 AUTOLOAD:=$(call AutoLoad,62,gpio_keys_polled)
244 $(call AddDepends/input)
247 define KernelPackage/input-gpio-keys-polled/description
248 Kernel module for support polled GPIO keys input device
251 $(eval $(call KernelPackage,input-gpio-keys-polled))
254 define KernelPackage/input-gpio-encoder
255 SUBMENU:=$(OTHER_MENU)
256 TITLE:=GPIO rotay encoder
257 KCONFIG:=CONFIG_INPUT_GPIO_ROTARY_ENCODER
258 FILES:=$(LINUX_DIR)/drivers/input/misc/rotary_encoder.ko
259 AUTOLOAD:=$(call AutoLoad,62,rotary_encoder)
260 $(call AddDepends/input,@GPIO_SUPPORT)
263 define KernelPackage/gpio-encoder/description
264 Kernel module to use rotary encoders connected to GPIO pins
267 $(eval $(call KernelPackage,input-gpio-encoder))
270 define KernelPackage/input-joydev
271 SUBMENU:=$(OTHER_MENU)
272 TITLE:=Joystick device support
273 KCONFIG:=CONFIG_INPUT_JOYDEV
274 FILES:=$(LINUX_DIR)/drivers/input/joydev.ko
275 AUTOLOAD:=$(call AutoLoad,62,joydev)
276 $(call AddDepends/input)
279 define KernelPackage/input-joydev/description
280 Kernel module for joystick support
283 $(eval $(call KernelPackage,input-joydev))
286 define KernelPackage/input-polldev
287 SUBMENU:=$(OTHER_MENU)
288 TITLE:=Polled Input device support
289 KCONFIG:=CONFIG_INPUT_POLLDEV
290 FILES:=$(LINUX_DIR)/drivers/input/input-polldev.ko
291 AUTOLOAD:=$(call AutoLoad,20,input-polldev)
292 $(call AddDepends/input)
295 define KernelPackage/input-polldev/description
296 Kernel module for support of polled input devices
299 $(eval $(call KernelPackage,input-polldev))
302 define KernelPackage/lp
303 SUBMENU:=$(OTHER_MENU)
304 TITLE:=Parallel port and line printer support
311 $(LINUX_DIR)/drivers/parport/parport.ko \
312 $(LINUX_DIR)/drivers/char/lp.ko \
313 $(LINUX_DIR)/drivers/char/ppdev.ko
314 AUTOLOAD:=$(call AutoLoad,50,parport lp)
317 $(eval $(call KernelPackage,lp))
320 define KernelPackage/mmc
321 SUBMENU:=$(OTHER_MENU)
322 TITLE:=MMC/SD Card Support
327 CONFIG_MMC_UNSAFE_RESUME=n \
328 CONFIG_MMC_BLOCK_BOUNCE=y \
330 CONFIG_MMC_TIFM_SD=n \
334 $(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
335 $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
336 AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block,1)
339 define KernelPackage/mmc/description
340 Kernel support for MMC/SD cards
343 $(eval $(call KernelPackage,mmc))
346 define KernelPackage/mmc-atmelmci
347 SUBMENU:=$(OTHER_MENU)
348 TITLE:=Amtel MMC Support
349 DEPENDS:=@TARGET_avr32 +kmod-mmc
350 KCONFIG:=CONFIG_MMC_ATMELMCI
351 FILES:=$(LINUX_DIR)/drivers/mmc/host/atmel-mci.ko
352 AUTOLOAD:=$(call AutoLoad,90,atmel-mci)
355 define KernelPackage/mmc-atmelmci/description
356 Kernel support for Atmel Multimedia Card Interface.
359 $(eval $(call KernelPackage,mmc-atmelmci,1))
362 define KernelPackage/oprofile
363 SUBMENU:=$(OTHER_MENU)
364 TITLE:=OProfile profiling support
365 KCONFIG:=CONFIG_OPROFILE
366 FILES:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/oprofile/oprofile.ko
367 DEPENDS:=@KERNEL_PROFILING
370 define KernelPackage/oprofile/description
371 Kernel module for support for oprofile system profiling.
374 $(eval $(call KernelPackage,oprofile))
377 define KernelPackage/rfkill
378 SUBMENU:=$(OTHER_MENU)
379 TITLE:=RF switch subsystem support
382 CONFIG_RFKILL_INPUT=y \
385 $(LINUX_DIR)/net/rfkill/rfkill.ko
386 AUTOLOAD:=$(call AutoLoad,20,rfkill)
387 $(call SetDepends/rfkill)
390 define KernelPackage/rfkill/description
391 Say Y here if you want to have control over RF switches
392 found on many WiFi and Bluetooth cards.
395 $(eval $(call KernelPackage,rfkill))
398 define KernelPackage/softdog
399 SUBMENU:=$(OTHER_MENU)
400 TITLE:=Software watchdog driver
401 KCONFIG:=CONFIG_SOFT_WATCHDOG
402 FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
403 AUTOLOAD:=$(call AutoLoad,50,softdog)
406 define KernelPackage/softdog/description
407 Software watchdog driver
410 $(eval $(call KernelPackage,softdog))
413 define KernelPackage/ssb
414 SUBMENU:=$(OTHER_MENU)
415 TITLE:=Silicon Sonics Backplane glue code
416 DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
419 CONFIG_SSB_B43_PCI_BRIDGE=y \
420 CONFIG_SSB_DRIVER_MIPS=n \
421 CONFIG_SSB_DRIVER_PCICORE=y \
422 CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
423 CONFIG_SSB_PCIHOST=y \
424 CONFIG_SSB_PCIHOST_POSSIBLE=y \
425 CONFIG_SSB_POSSIBLE=y \
428 FILES:=$(LINUX_DIR)/drivers/ssb/ssb.ko
429 AUTOLOAD:=$(call AutoLoad,29,ssb)
432 define KernelPackage/ssb/description
433 Silicon Sonics Backplane glue code.
436 $(eval $(call KernelPackage,ssb))
439 define KernelPackage/bcma
440 SUBMENU:=$(OTHER_MENU)
442 DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx
445 CONFIG_BCMA_POSSIBLE=y \
446 CONFIG_BCMA_BLOCKIO=y \
447 CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
448 CONFIG_BCMA_HOST_PCI=y \
449 CONFIG_BCMA_DRIVER_MIPS=n \
450 CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \
452 FILES:=$(LINUX_DIR)/drivers/bcma/bcma.ko
453 AUTOLOAD:=$(call AutoLoad,29,bcma)
456 define KernelPackage/bcma/description
457 Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture.
460 $(eval $(call KernelPackage,bcma))
463 define KernelPackage/wdt-omap
464 SUBMENU:=$(OTHER_MENU)
465 TITLE:=OMAP Watchdog timer
466 DEPENDS:=@(TARGET_omap24xx||TARGET_omap35xx)
467 KCONFIG:=CONFIG_OMAP_WATCHDOG
468 FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/omap_wdt.ko
469 AUTOLOAD:=$(call AutoLoad,50,omap_wdt.ko)
472 define KernelPackage/wdt-omap/description
473 Kernel module for TI omap watchdog timer.
476 $(eval $(call KernelPackage,wdt-omap))
479 define KernelPackage/wdt-orion
480 SUBMENU:=$(OTHER_MENU)
481 TITLE:=Marvell Orion Watchdog timer
482 DEPENDS:=@TARGET_orion||@TARGET_kirkwood
483 KCONFIG:=CONFIG_ORION_WATCHDOG
484 FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/orion_wdt.ko
485 AUTOLOAD:=$(call AutoLoad,50,orion_wdt)
488 define KernelPackage/wdt-orion/description
489 Kernel module for Marvell orion watchdog timer.
492 $(eval $(call KernelPackage,wdt-orion))
495 define KernelPackage/wdt-ath79
496 SUBMENU:=$(OTHER_MENU)
497 TITLE:=Atheros AR7XXX/AR9XXX watchdog timer
498 DEPENDS:=@TARGET_ar71xx
499 KCONFIG:=CONFIG_ATH79_WDT
500 FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/ath79_wdt.ko
501 AUTOLOAD:=$(call AutoLoad,50,ath79_wdt)
504 define KernelPackage/wdt-ath79/description
505 Kernel module for AR7XXX/AR9XXX watchdog timer.
508 $(eval $(call KernelPackage,wdt-ath79))
511 define KernelPackage/booke-wdt
512 SUBMENU:=$(OTHER_MENU)
513 TITLE:=PowerPC Book-E Watchdog Timer
514 DEPENDS:=@(TARGET_mpc85xx||TARGET_ppc40x||TARGET_ppc44x)
515 KCONFIG:=CONFIG_BOOKE_WDT
516 FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/booke_wdt.ko
517 AUTOLOAD:=$(call AutoLoad,50,booke_wdt)
520 define KernelPackage/booke-wdt/description
521 Kernel module for PowerPC Book-E Watchdog Timer.
524 $(eval $(call KernelPackage,booke-wdt))
527 define KernelPackage/pwm
528 SUBMENU:=$(OTHER_MENU)
529 TITLE:=PWM generic API
530 KCONFIG:=CONFIG_GENERIC_PWM
531 FILES:=$(LINUX_DIR)/drivers/pwm/pwm.ko
532 AUTOLOAD:=$(call AutoLoad,50,pwm)
535 define KernelPackage/pwm/description
536 Kernel module that implement a generic PWM API
539 $(eval $(call KernelPackage,pwm))
542 define KernelPackage/pwm-gpio
543 SUBMENU:=$(OTHER_MENU)
546 KCONFIG:=CONFIG_GPIO_PWM
547 FILES:=$(LINUX_DIR)/drivers/pwm/gpio-pwm.ko
548 AUTOLOAD:=$(call AutoLoad,51,gpio-pwm)
551 define KernelPackage/pwm-gpio/description
552 Kernel module to models a single-channel PWM device using a timer and a GPIO pin
555 $(eval $(call KernelPackage,pwm-gpio))
558 define KernelPackage/rtc-marvell
559 SUBMENU:=$(OTHER_MENU)
560 TITLE:=Marvell SoC built-in RTC support
561 $(call AddDepends/rtc)
562 DEPENDS+=@TARGET_kirkwood||TARGET_orion
563 KCONFIG:=CONFIG_RTC_DRV_MV
564 FILES:=$(LINUX_DIR)/drivers/rtc/rtc-mv.ko
565 AUTOLOAD:=$(call AutoLoad,60,rtc-mv)
568 define KernelPackage/rtc-marvell/description
569 Kernel module for Marvell SoC built-in RTC.
572 $(eval $(call KernelPackage,rtc-marvell))
574 define KernelPackage/rtc-pcf8563
575 SUBMENU:=$(OTHER_MENU)
576 TITLE:=Philips PCF8563/Epson RTC8564 RTC support
577 $(call AddDepends/rtc)
578 KCONFIG:=CONFIG_RTC_DRV_PCF8563
579 FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
580 AUTOLOAD:=$(call AutoLoad,60,rtc-pcf8563)
583 define KernelPackage/rtc-pcf8563/description
584 Kernel module for Philips PCF8563 RTC chip.
585 The Epson RTC8564 should work as well.
588 $(eval $(call KernelPackage,rtc-pcf8563))
591 define KernelPackage/rtc-pcf2123
592 SUBMENU:=$(OTHER_MENU)
593 TITLE:=Philips PCF2123 RTC support
594 $(call AddDepends/rtc)
595 KCONFIG:=CONFIG_RTC_DRV_PCF2123
596 FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
597 AUTOLOAD:=$(call AutoLoad,60,rtc-pcf2123)
600 define KernelPackage/rtc-pcf2123/description
601 Kernel module for Philips PCF2123 RTC chip.
604 $(eval $(call KernelPackage,rtc-pcf2123))
606 define KernelPackage/rtc-pt7c4338
607 SUBMENU:=$(OTHER_MENU)
608 TITLE:=Pericom PT7C4338 RTC support
609 $(call AddDepends/rtc,+kmod-i2c-core)
610 KCONFIG:=CONFIG_RTC_DRV_PT7C4338
611 FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
612 AUTOLOAD:=$(call AutoLoad,60,rtc-pt7c4338)
615 define KernelPackage/rtc-pt7c4338/description
616 Kernel module for Pericom PT7C4338 i2c RTC chip.
619 $(eval $(call KernelPackage,rtc-pt7c4338))
622 define KernelPackage/mtdtests
623 SUBMENU:=$(OTHER_MENU)
624 TITLE:=MTD subsystem tests
625 KCONFIG:=CONFIG_MTD_TESTS
627 $(LINUX_DIR)/drivers/mtd/tests/mtd_nandecctest.ko \
628 $(LINUX_DIR)/drivers/mtd/tests/mtd_oobtest.ko \
629 $(LINUX_DIR)/drivers/mtd/tests/mtd_pagetest.ko \
630 $(LINUX_DIR)/drivers/mtd/tests/mtd_readtest.ko \
631 $(LINUX_DIR)/drivers/mtd/tests/mtd_speedtest.ko \
632 $(LINUX_DIR)/drivers/mtd/tests/mtd_stresstest.ko \
633 $(LINUX_DIR)/drivers/mtd/tests/mtd_subpagetest.ko \
634 $(LINUX_DIR)/drivers/mtd/tests/mtd_torturetest.ko
637 define KernelPackage/mtdtests/description
638 Kernel modules for MTD subsystem/driver testing.
641 $(eval $(call KernelPackage,mtdtests))
644 define KernelPackage/nand
645 SUBMENU:=$(OTHER_MENU)
646 TITLE:=NAND flash support
647 DEPENDS:=@!LINUX_2_6_39
648 KCONFIG:=CONFIG_MTD_NAND \
649 CONFIG_MTD_NAND_IDS \
652 $(LINUX_DIR)/drivers/mtd/nand/nand_ids.ko \
653 $(LINUX_DIR)/drivers/mtd/nand/nand_ecc.ko \
654 $(LINUX_DIR)/drivers/mtd/nand/nand.ko
655 AUTOLOAD:=$(call AutoLoad,20,nand_ids nand_ecc nand)
658 define KernelPackage/nand/description
659 Kernel module for NAND support.
662 $(eval $(call KernelPackage,nand))
665 define KernelPackage/nandsim
666 SUBMENU:=$(OTHER_MENU)
667 TITLE:=NAND simulator
669 KCONFIG:=CONFIG_MTD_NAND_NANDSIM
670 FILES:=$(LINUX_DIR)/drivers/mtd/nand/nandsim.ko
673 define KernelPackage/nandsim/description
674 Kernel module for NAND flash simulation.
677 $(eval $(call KernelPackage,nandsim))
679 define KernelPackage/serial-8250
680 SUBMENU:=$(OTHER_MENU)
682 KCONFIG:= CONFIG_SERIAL_8250 \
683 CONFIG_SERIAL_8250_NR_UARTS=16 \
684 CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
685 CONFIG_SERIAL_8250_EXTENDED=y \
686 CONFIG_SERIAL_8250_MANY_PORTS=y \
687 CONFIG_SERIAL_8250_SHARE_IRQ=y \
688 CONFIG_SERIAL_8250_DETECT_IRQ=n \
689 CONFIG_SERIAL_8250_RSA=n
690 FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko
693 define KernelPackage/serial-8250/description
694 Kernel module for 8250 UART based serial ports.
697 $(eval $(call KernelPackage,serial-8250))
700 define KernelPackage/acpi-button
701 SUBMENU:=$(OTHER_MENU)
702 TITLE:=ACPI Button Support
703 DEPENDS:=@(TARGET_x86_generic||TARGET_x86_kvm_guest||TARGET_x86_xen_domu) +kmod-input-evdev
704 KCONFIG:=CONFIG_ACPI_BUTTON
705 FILES:=$(LINUX_DIR)/drivers/acpi/button.ko
706 AUTOLOAD:=$(call AutoLoad,06,button)
709 define KernelPackage/acpi-button/description
710 Kernel module for ACPI Button support
713 $(eval $(call KernelPackage,acpi-button))
715 define KernelPackage/regmap
716 SUBMENU:=$(OTHER_MENU)
717 TITLE:=Generic register map support
718 KCONFIG:=CONFIG_REGMAP=y \
721 FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
722 $(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko
723 AUTOLOAD:=$(call AutoLoad,10,regmap-i2c regmap-spi)
726 define KernelPackage/regmap/description
727 Generic register map support
730 $(eval $(call KernelPackage,regmap))