2 # Copyright (C) 2006-2012 OpenWrt.org
4 # This is free software, licensed under the GNU General Public License v2.
5 # See /LICENSE for more information.
8 BLOCK_MENU:=Block Devices
10 define KernelPackage/aoe
11 SUBMENU:=$(BLOCK_MENU)
12 TITLE:=ATA over Ethernet support
13 KCONFIG:=CONFIG_ATA_OVER_ETH
14 FILES:=$(LINUX_DIR)/drivers/block/aoe/aoe.ko
15 AUTOLOAD:=$(call AutoLoad,30,aoe)
18 define KernelPackage/aoe/description
19 Kernel support for ATA over Ethernet
22 $(eval $(call KernelPackage,aoe))
25 define KernelPackage/ata-core
26 SUBMENU:=$(BLOCK_MENU)
27 TITLE:=Serial and Parallel ATA support
28 DEPENDS:=@PCI_SUPPORT +kmod-scsi-core
30 FILES:=$(LINUX_DIR)/drivers/ata/libata.ko
31 AUTOLOAD:=$(call AutoLoad,21,libata,1)
34 $(eval $(call KernelPackage,ata-core))
38 SUBMENU:=$(BLOCK_MENU)
39 DEPENDS+=kmod-ata-core $(1)
43 define KernelPackage/ata-ahci
44 TITLE:=AHCI Serial ATA support
45 KCONFIG:=CONFIG_SATA_AHCI
47 $(LINUX_DIR)/drivers/ata/ahci.ko \
48 $(LINUX_DIR)/drivers/ata/libahci.ko
49 AUTOLOAD:=$(call AutoLoad,41,libahci ahci,1)
50 $(call AddDepends/ata)
53 define KernelPackage/ata-ahci/description
54 Support for AHCI Serial ATA controllers.
57 $(eval $(call KernelPackage,ata-ahci))
60 define KernelPackage/ata-artop
61 TITLE:=ARTOP 6210/6260 PATA support
62 KCONFIG:=CONFIG_PATA_ARTOP
63 FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.ko
64 AUTOLOAD:=$(call AutoLoad,41,pata_artop,1)
65 $(call AddDepends/ata)
68 define KernelPackage/ata-artop/description
69 PATA support for ARTOP 6210/6260 host controllers.
72 $(eval $(call KernelPackage,ata-artop))
75 define KernelPackage/ata-marvell-sata
76 TITLE:=Marvell Serial ATA support
77 KCONFIG:=CONFIG_SATA_MV
78 FILES:=$(LINUX_DIR)/drivers/ata/sata_mv.ko
79 AUTOLOAD:=$(call AutoLoad,41,sata_mv,1)
80 $(call AddDepends/ata)
83 define KernelPackage/ata-marvell-sata/description
84 SATA support for marvell chipsets
87 $(eval $(call KernelPackage,ata-marvell-sata))
90 define KernelPackage/ata-nvidia-sata
91 TITLE:=Nvidia Serial ATA support
92 KCONFIG:=CONFIG_SATA_NV
93 FILES:=$(LINUX_DIR)/drivers/ata/sata_nv.ko
94 AUTOLOAD:=$(call AutoLoad,41,sata_nv,1)
95 $(call AddDepends/ata)
98 $(eval $(call KernelPackage,ata-nvidia-sata))
101 define KernelPackage/ata-pdc202xx-old
102 SUBMENU:=$(BLOCK_MENU)
103 TITLE:=Older Promise PATA controller support
104 DEPENDS:=kmod-ata-core
108 FILES:=$(LINUX_DIR)/drivers/ata/pata_pdc202xx_old.ko
109 AUTOLOAD:=$(call AutoLoad,41,pata_pdc202xx_old,1)
112 define KernelPackage/ata-pdc202xx-old/description
113 This option enables support for the Promise 20246, 20262, 20263,
114 20265 and 20267 adapters.
117 $(eval $(call KernelPackage,ata-pdc202xx-old))
120 define KernelPackage/ata-piix
121 TITLE:=Intel PIIX PATA/SATA support
122 KCONFIG:=CONFIG_ATA_PIIX
123 FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.ko
124 AUTOLOAD:=$(call AutoLoad,41,ata_piix,1)
125 $(call AddDepends/ata)
128 define KernelPackage/ata-piix/description
129 SATA support for Intel ICH5/6/7/8 series host controllers and
130 PATA support for Intel ESB/ICH/PIIX3/PIIX4 series host controllers.
133 $(eval $(call KernelPackage,ata-piix))
136 define KernelPackage/ata-sil
137 TITLE:=Silicon Image SATA support
138 KCONFIG:=CONFIG_SATA_SIL
139 FILES:=$(LINUX_DIR)/drivers/ata/sata_sil.ko
140 AUTOLOAD:=$(call AutoLoad,41,sata_sil,1)
141 $(call AddDepends/ata)
144 define KernelPackage/ata-sil/description
145 Support for Silicon Image Serial ATA controllers.
148 $(eval $(call KernelPackage,ata-sil))
151 define KernelPackage/ata-sil24
152 TITLE:=Silicon Image 3124/3132 SATA support
153 KCONFIG:=CONFIG_SATA_SIL24
154 FILES:=$(LINUX_DIR)/drivers/ata/sata_sil24.ko
155 AUTOLOAD:=$(call AutoLoad,41,sata_sil24,1)
156 $(call AddDepends/ata)
159 define KernelPackage/ata-sil24/description
160 Support for Silicon Image 3124/3132 Serial ATA controllers.
163 $(eval $(call KernelPackage,ata-sil24))
166 define KernelPackage/ata-sis
167 TITLE:=SIS SATA support
168 KCONFIG:=CONFIG_SATA_SIS
169 FILES:=$(LINUX_DIR)/drivers/ata/sata_sis.ko
170 AUTOLOAD:=$(call AutoLoad,41,sata_sis,1)
171 $(call AddDepends/ata)
174 define KernelPackage/ata-sis/description
175 Support for SIS Serial ATA controllers.
178 $(eval $(call KernelPackage,ata-sis))
181 define KernelPackage/ata-via-sata
182 TITLE:=VIA SATA support
183 KCONFIG:=CONFIG_SATA_VIA
184 FILES:=$(LINUX_DIR)/drivers/ata/sata_via.ko
185 AUTOLOAD:=$(call AutoLoad,41,sata_via,1)
186 $(call AddDepends/ata)
189 define KernelPackage/ata-via-sata/description
190 This option enables support for VIA Serial ATA.
193 $(eval $(call KernelPackage,ata-via-sata))
196 define KernelPackage/block2mtd
197 SUBMENU:=$(BLOCK_MENU)
198 TITLE:=Block device MTD emulation
199 KCONFIG:=CONFIG_MTD_BLOCK2MTD
200 FILES:=$(LINUX_DIR)/drivers/mtd/devices/block2mtd.ko
203 $(eval $(call KernelPackage,block2mtd))
206 define KernelPackage/dm
207 SUBMENU:=$(BLOCK_MENU)
209 # All the "=n" are unnecessary, they're only there
210 # to stop the config from asking the question.
211 # MIRROR is M because I've needed it for pvmove.
213 CONFIG_BLK_DEV_MD=n \
217 CONFIG_DM_MULTIPATH=n \
219 CONFIG_DM_SNAPSHOT=n \
220 CONFIG_DM_LOG_USERSPACE=n \
225 FILES:=$(LINUX_DIR)/drivers/md/dm-*.ko
226 AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror dm-crypt)
229 define KernelPackage/dm/description
230 Kernel module necessary for LVM2 support
233 $(eval $(call KernelPackage,dm))
236 define KernelPackage/md-mod
237 SUBMENU:=$(BLOCK_MENU)
241 CONFIG_BLK_DEV_MD=m \
242 CONFIG_MD_AUTODETECT=y \
244 FILES:=$(LINUX_DIR)/drivers/md/md-mod.ko
245 AUTOLOAD:=$(call AutoLoad,27,md-mod)
248 define KernelPackage/md-mod/description
249 Kernel RAID md module (md-mod.ko).
250 You will need to select at least one RAID level module below.
253 $(eval $(call KernelPackage,md-mod))
256 define KernelPackage/md/Depends
257 SUBMENU:=$(BLOCK_MENU)
258 DEPENDS:=kmod-md-mod $(1)
262 define KernelPackage/md-linear
263 $(call KernelPackage/md/Depends,)
264 TITLE:=RAID Linear Module
265 KCONFIG:=CONFIG_MD_LINEAR
266 FILES:=$(LINUX_DIR)/drivers/md/linear.ko
267 AUTOLOAD:=$(call AutoLoad,28,linear)
270 define KernelPackage/md-linear/description
271 RAID "Linear" or "Append" driver module (linear.ko)
274 $(eval $(call KernelPackage,md-linear))
277 define KernelPackage/md-raid0
278 $(call KernelPackage/md/Depends,)
280 KCONFIG:=CONFIG_MD_RAID0
281 FILES:=$(LINUX_DIR)/drivers/md/raid0.ko
282 AUTOLOAD:=$(call AutoLoad,28,raid0)
285 define KernelPackage/md-raid0/description
286 RAID Level 0 (Striping) driver module (raid0.ko)
289 $(eval $(call KernelPackage,md-raid0))
292 define KernelPackage/md-raid1
293 $(call KernelPackage/md/Depends,)
295 KCONFIG:=CONFIG_MD_RAID1
296 FILES:=$(LINUX_DIR)/drivers/md/raid1.ko
297 AUTOLOAD:=$(call AutoLoad,28,raid1)
300 define KernelPackage/md-raid1/description
301 RAID Level 1 (Mirroring) driver (raid1.ko)
304 $(eval $(call KernelPackage,md-raid1))
307 define KernelPackage/md-raid10
308 $(call KernelPackage/md/Depends,)
310 KCONFIG:=CONFIG_MD_RAID10
311 FILES:=$(LINUX_DIR)/drivers/md/raid10.ko
312 AUTOLOAD:=$(call AutoLoad,28,raid10)
315 define KernelPackage/md-raid10/description
316 RAID Level 10 (Mirroring+Striping) driver module (raid10.ko)
319 $(eval $(call KernelPackage,md-raid10))
322 define KernelPackage/md-raid456
323 $(call KernelPackage/md/Depends,)
324 TITLE:=RAID Level 456 Driver
328 CONFIG_ASYNC_MEMCPY \
331 CONFIG_ASYNC_RAID6_RECOV \
332 CONFIG_ASYNC_RAID6_TEST=n \
335 CONFIG_MULTICORE_RAID456=n
337 $(LINUX_DIR)/crypto/xor.ko \
338 $(LINUX_DIR)/crypto/async_tx/async_tx.ko \
339 $(LINUX_DIR)/crypto/async_tx/async_memcpy.ko \
340 $(LINUX_DIR)/crypto/async_tx/async_xor.ko \
341 $(LINUX_DIR)/crypto/async_tx/async_pq.ko \
342 $(LINUX_DIR)/crypto/async_tx/async_raid6_recov.ko \
343 $(LINUX_DIR)/drivers/md/raid456.ko \
344 $(LINUX_DIR)/lib/raid6/raid6_pq.ko
345 AUTOLOAD:=$(call AutoLoad,28, xor async_tx async_memcpy async_xor raid6_pq async_pq async_raid6_recov raid456)
348 define KernelPackage/md-raid456/description
349 RAID Level 4,5,6 kernel module (raid456.ko)
351 Includes the following modules required by
362 $(eval $(call KernelPackage,md-raid456))
365 define KernelPackage/md-multipath
366 $(call KernelPackage/md/Depends,)
367 TITLE:=MD Multipath Module
368 KCONFIG:=CONFIG_MD_MULTIPATH
369 FILES:=$(LINUX_DIR)/drivers/md/multipath.ko
370 AUTOLOAD:=$(call AutoLoad,29,multipath)
373 define KernelPackage/md-multipath/description
374 Multipath driver module (multipath.ko)
377 $(eval $(call KernelPackage,md-multipath))
380 define KernelPackage/ide-core
381 SUBMENU:=$(BLOCK_MENU)
382 TITLE:=IDE (ATA/ATAPI) device support
383 DEPENDS:=@PCI_SUPPORT
387 CONFIG_BLK_DEV_IDEDISK \
389 CONFIG_IDE_GD_ATA=y \
390 CONFIG_IDE_GD_ATAPI=n \
391 CONFIG_IDEPCI_PCIBUS_ORDER=y \
392 CONFIG_BLK_DEV_IDEDMA_PCI=y \
393 CONFIG_BLK_DEV_IDEPCI=y
395 $(LINUX_DIR)/drivers/ide/ide-core.ko \
396 $(LINUX_DIR)/drivers/ide/ide-gd_mod.ko
398 $(call AutoLoad,20,ide-core,1) \
399 $(call AutoLoad,40,ide-gd_mod,1)
402 define KernelPackage/ide-core/description
403 Kernel support for IDE, useful for usb mass storage devices (e.g. on WL-HDD)
409 $(eval $(call KernelPackage,ide-core))
412 define AddDepends/ide
413 SUBMENU:=$(BLOCK_MENU)
414 DEPENDS+=kmod-ide-core $(1)
418 define KernelPackage/ide-generic
419 SUBMENU:=$(BLOCK_MENU)
420 DEPENDS:=@PCI_SUPPORT
421 TITLE:=Kernel support for generic PCI IDE chipsets
422 KCONFIG:=CONFIG_BLK_DEV_GENERIC
423 FILES:=$(LINUX_DIR)/drivers/ide/ide-pci-generic.ko
424 AUTOLOAD:=$(call AutoLoad,30,ide-pci-generic,1)
425 $(call AddDepends/ide)
428 $(eval $(call KernelPackage,ide-generic))
431 define KernelPackage/ide-generic-old
432 SUBMENU:=$(BLOCK_MENU)
433 TITLE:=Kernel support for generic (legacy) IDE chipsets
434 KCONFIG:=CONFIG_IDE_GENERIC
435 FILES:=$(LINUX_DIR)/drivers/ide/ide-generic.ko
436 AUTOLOAD:=$(call AutoLoad,30,ide-generic,1)
437 $(call AddDepends/ide)
440 $(eval $(call KernelPackage,ide-generic-old))
443 define KernelPackage/ide-aec62xx
444 TITLE:=Acard AEC62xx IDE driver
445 DEPENDS:=@PCI_SUPPORT
446 KCONFIG:=CONFIG_BLK_DEV_AEC62XX
447 FILES:=$(LINUX_DIR)/drivers/ide/aec62xx.ko
448 AUTOLOAD:=$(call AutoLoad,30,aec62xx,1)
449 $(call AddDepends/ide)
452 define KernelPackage/ide-aec62xx/description
453 Support for Acard AEC62xx (Artop ATP8xx) IDE controllers.
456 $(eval $(call KernelPackage,ide-aec62xx,1))
459 define KernelPackage/ide-pdc202xx
460 TITLE:=Promise PDC202xx IDE driver
461 DEPENDS:=@PCI_SUPPORT
462 KCONFIG:=CONFIG_BLK_DEV_PDC202XX_OLD
463 FILES:=$(LINUX_DIR)/drivers/ide/pdc202xx_old.ko
464 AUTOLOAD:=$(call AutoLoad,30,pdc202xx_old,1)
465 $(call AddDepends/ide)
468 define KernelPackage/ide-pdc202xx/description
469 Support for the Promise Ultra 33/66/100 (PDC202{46|62|65|67|68}) IDE
473 $(eval $(call KernelPackage,ide-pdc202xx))
476 define KernelPackage/ide-it821x
477 TITLE:=ITE IT821x IDE driver
478 DEPENDS:=@PCI_SUPPORT
479 KCONFIG:=CONFIG_BLK_DEV_IT821X
480 FILES=$(LINUX_DIR)/drivers/ide/it821x.ko
481 AUTOLOAD:=$(call AutoLoad,30,it821x,1)
482 $(call AddDepends/ide)
485 define KernelPackage/ide-it821x/description
486 Kernel module for the ITE IDE821x IDE controllers.
489 $(eval $(call KernelPackage,ide-it821x))
492 define KernelPackage/libsas
493 SUBMENU:=$(BLOCK_MENU)
494 TITLE:=SAS Domain Transport Attributes
495 KCONFIG:=CONFIG_SCSI_SAS_LIBSAS \
496 CONFIG_SCSI_SAS_ATTRS \
497 CONFIG_SCSI_SAS_ATA=y \
498 CONFIG_SCSI_SAS_HOST_SMP=y \
499 CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
501 $(LINUX_DIR)/drivers/scsi/scsi_transport_sas.ko \
502 $(LINUX_DIR)/drivers/scsi/libsas/libsas.ko
503 AUTOLOAD:=$(call AutoLoad,29,scsi_transport_sas libsas,1)
506 define KernelPackage/libsas/description
507 SAS Domain Transport Attributes support.
510 $(eval $(call KernelPackage,libsas,1))
513 define KernelPackage/loop
514 SUBMENU:=$(BLOCK_MENU)
515 TITLE:=Loopback device support
517 CONFIG_BLK_DEV_LOOP \
518 CONFIG_BLK_DEV_CRYPTOLOOP=n
519 FILES:=$(LINUX_DIR)/drivers/block/loop.ko
520 AUTOLOAD:=$(call AutoLoad,30,loop)
523 define KernelPackage/loop/description
524 Kernel module for loopback device support
527 $(eval $(call KernelPackage,loop))
530 define KernelPackage/mvsas
531 SUBMENU:=$(BLOCK_MENU)
532 TITLE:=Marvell 88SE6440 SAS/SATA driver
533 DEPENDS:=@TARGET_x86 +kmod-libsas
536 CONFIG_SCSI_MVSAS_TASKLET=n
537 FILES:=$(LINUX_DIR)/drivers/scsi/mvsas/mvsas.ko
538 AUTOLOAD:=$(call AutoLoad,40,mvsas,1)
541 define KernelPackage/mvsas/description
542 Kernel support for the Marvell SAS SCSI adapters
545 $(eval $(call KernelPackage,mvsas))
548 define KernelPackage/nbd
549 SUBMENU:=$(BLOCK_MENU)
550 TITLE:=Network block device support
551 KCONFIG:=CONFIG_BLK_DEV_NBD
552 FILES:=$(LINUX_DIR)/drivers/block/nbd.ko
553 AUTOLOAD:=$(call AutoLoad,30,nbd)
556 define KernelPackage/nbd/description
557 Kernel module for network block device support
560 $(eval $(call KernelPackage,nbd))
563 define KernelPackage/scsi-core
564 SUBMENU:=$(BLOCK_MENU)
565 TITLE:=SCSI device support
570 $(if $(findstring y,$(CONFIG_SCSI)),,$(LINUX_DIR)/drivers/scsi/scsi_mod.ko) \
571 $(LINUX_DIR)/drivers/scsi/sd_mod.ko
572 AUTOLOAD:=$(call AutoLoad,20,scsi_mod,1) $(call AutoLoad,40,sd_mod,1)
575 $(eval $(call KernelPackage,scsi-core))
578 define KernelPackage/scsi-generic
579 SUBMENU:=$(BLOCK_MENU)
580 TITLE:=Kernel support for SCSI generic
581 DEPENDS:=+kmod-scsi-core
585 $(LINUX_DIR)/drivers/scsi/sg.ko
586 AUTOLOAD:=$(call AutoLoad,65,sg)
589 $(eval $(call KernelPackage,scsi-generic))
592 define KernelPackage/scsi-cdrom
593 SUBMENU:=$(BLOCK_MENU)
594 TITLE:=Kernel support for CD / DVD drives
595 DEPENDS:=+kmod-scsi-core
598 CONFIG_BLK_DEV_SR_VENDOR=n
600 $(LINUX_DIR)/drivers/cdrom/cdrom.ko \
601 $(LINUX_DIR)/drivers/scsi/sr_mod.ko
602 AUTOLOAD:=$(call AutoLoad,30,cdrom) $(call AutoLoad,45,sr_mod)
605 $(eval $(call KernelPackage,scsi-cdrom))