2 . /lib/netifd/netifd-wireless.sh
3 . /lib/netifd/hostapd.sh
5 init_wireless_driver "$@"
7 MP_CONFIG_INT="mesh_retry_timeout mesh_confirm_timeout mesh_holding_timeout mesh_max_peer_links
8 mesh_max_retries mesh_ttl mesh_element_ttl mesh_hwmp_max_preq_retries
9 mesh_path_refresh_time mesh_min_discovery_timeout mesh_hwmp_active_path_timeout
10 mesh_hwmp_preq_min_interval mesh_hwmp_net_diameter_traversal_time mesh_hwmp_rootmode
11 mesh_hwmp_rann_interval mesh_gate_announcements mesh_sync_offset_max_neighor
12 mesh_rssi_threshold mesh_hwmp_active_path_to_root_timeout mesh_hwmp_root_interval
13 mesh_hwmp_confirmation_interval mesh_awake_window mesh_plink_timeout"
14 MP_CONFIG_BOOL="mesh_auto_open_plinks mesh_fwding"
15 MP_CONFIG_STRING="mesh_power_mode"
17 drv_mac80211_init_device_config() {
18 hostapd_common_add_device_config
20 config_add_string path phy 'macaddr:macaddr'
21 config_add_string hwmode
22 config_add_int beacon_int chanbw frag rts
23 config_add_int rxantenna txantenna antenna_gain txpower distance
24 config_add_boolean noscan
25 config_add_array ht_capab
39 config_add_int vht_max_mpdu vht_max_rx_stbc vht_link_adapt vht160
42 drv_mac80211_init_iface_config() {
43 hostapd_common_add_bss_config
45 config_add_string 'macaddr:macaddr' ifname
47 config_add_boolean wds powersave
48 config_add_int maxassoc
49 config_add_int max_listen_int
50 config_add_int dtim_interval
53 config_add_string mesh_id
54 config_add_int $MP_CONFIG_INT
55 config_add_boolean $MP_CONFIG_BOOL
56 config_add_string $MP_CONFIG_STRING
59 mac80211_add_capabilities() {
60 local __var="$1"; shift
61 local __mask="$1"; shift
69 [ "$(($4))" -gt 0 ] || continue
70 [ "$(($__mask & $2))" -eq "$((${3:-$2}))" ] || continue
75 export -n -- "$__var=$__out"
78 mac80211_hostapd_setup_base() {
83 [ "$auto_channel" -gt 0 ] && channel=acs_survey
85 json_get_vars noscan htmode
86 json_get_values ht_capab_list ht_capab
92 HT40*|VHT40|VHT80|VHT160)
95 case "$(( ($channel / 4) % 2 ))" in
96 1) ht_capab="[HT40+]";;
97 0) ht_capab="[HT40-]";;
102 HT40+) ht_capab="[HT40+]";;
103 HT40-) ht_capab="[HT40-]";;
105 if [ "$channel" -lt 7 ]; then
114 [ "$auto_channel" -gt 0 ] && ht_capab="[HT40+]"
119 [ -n "$ieee80211n" ] && {
120 append base_cfg "ieee80211n=1" "$N"
132 for cap in $(iw phy "$phy" info | grep 'Capabilities:' | cut -d: -f2); do
133 ht_cap_mask="$(($ht_cap_mask | $cap))"
136 cap_rx_stbc=$((($ht_cap_mask >> 8) & 3))
137 [ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc"
138 ht_cap_mask="$(( ($ht_cap_mask & ~(0x300)) | ($cap_rx_stbc << 8) ))"
140 mac80211_add_capabilities ht_capab_flags $ht_cap_mask \
142 GF:0x10::$greenfield \
143 SHORT-GI-20:0x20::$short_gi_20 \
144 SHORT-GI-40:0x40::$short_gi_40 \
145 TX-STBC:0x80::$max_tx_stbc \
146 RX-STBC1:0x300:0x100:1 \
147 RX-STBC12:0x300:0x200:1 \
148 RX-STBC123:0x300:0x300:1 \
149 DSSS_CCK-40:0x1000::$dsss_cck_40
151 [ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab$ht_capab_flags" "$N"
160 case "$(( ($channel / 4) % 2 ))" in
161 1) idx=$(($channel + 2));;
162 0) idx=$(($channel - 2));;
165 append base_cfg "vht_oper_chwidth=0" "$N"
166 append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
169 case "$(( ($channel / 4) % 2 ))" in
170 1) idx=$(($channel + 6));;
171 2) idx=$(($channel + 2));;
172 3) idx=$(($channel - 2));;
173 0) idx=$(($channel - 6));;
176 append base_cfg "vht_oper_chwidth=1" "$N"
177 append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
181 36|40|44|48|52|56|60|64) idx=50;;
182 100|104|108|112|116|120|124|128) idx=114;;
185 append base_cfg "vht_oper_chwidth=2" "$N"
186 append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
190 if [ "$enable_ac" != "0" ]; then
202 rx_antenna_pattern:1 \
203 tx_antenna_pattern:1 \
209 append base_cfg "ieee80211ac=1" "$N"
211 for cap in $(iw phy "$phy" info | awk -F "[()]" '/VHT Capabilities/ { print $2 }'); do
212 vht_cap="$(($vht_cap | $cap))"
215 cap_rx_stbc=$((($vht_cap >> 8) & 7))
216 [ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc"
217 ht_cap_mask="$(( ($vht_cap & ~(0x700)) | ($cap_rx_stbc << 8) ))"
219 mac80211_add_capabilities vht_capab $vht_cap \
220 RXLDPC:0x10::$rxldpc \
221 SHORT-GI-80:0x20::$short_gi_80 \
222 SHORT-GI-160:0x40::$short_gi_160 \
223 TX-STBC-2BY1:0x80::$tx_stbc \
224 SU-BEAMFORMER:0x800::$su_beamformer \
225 SU-BEAMFORMEE:0x1000::$su_beamformee \
226 MU-BEAMFORMER:0x80000::$mu_beamformer \
227 MU-BEAMFORMEE:0x100000::$mu_beamformee \
228 VHT-TXOP-PS:0x200000::$vht_txop_ps \
229 HTC-VHT:0x400000::$htc_vht \
230 RX-ANTENNA-PATTERN:0x10000000::$rx_antenna_pattern \
231 TX-ANTENNA-PATTERN:0x20000000::$tx_antenna_pattern \
232 RX-STBC1:0x700:0x100:1 \
233 RX-STBC12:0x700:0x200:1 \
234 RX-STBC123:0x700:0x300:1 \
235 RX-STBC1234:0x700:0x400:1 \
237 # supported Channel widths
239 [ "$(($vht_cap & 12))" -eq 4 -a 1 -le "$vht160" ] && \
241 [ "$(($vht_cap & 12))" -eq 8 -a 2 -le "$vht160" ] && \
243 [ "$vht160_hw" = 1 ] && vht_capab="$vht_capab[VHT160]"
244 [ "$vht160_hw" = 2 ] && vht_capab="$vht_capab[VHT160-80PLUS80]"
246 # maximum MPDU length
248 [ "$(($vht_cap & 3))" -ge 1 -a 7991 -le "$vht_max_mpdu" ] && \
250 [ "$(($vht_cap & 3))" -ge 2 -a 11454 -le "$vht_max_mpdu" ] && \
251 vht_max_mpdu_hw=11454
252 [ "$vht_max_mpdu_hw" != 3895 ] && \
253 vht_capab="$vht_capab[MAX-MPDU-$vht_max_mpdu_hw]"
255 # whether or not the STA supports link adaptation using VHT variant
257 [ "$(($vht_cap & 201326592))" -ge 134217728 -a 2 -le "$vht_link_adapt" ] && \
259 [ "$(($vht_cap & 201326592))" -ge 201326592 -a 3 -le "$vht_link_adapt" ] && \
261 [ "$vht_link_adapt_hw" != 0 ] && \
262 vht_capab="$vht_capab[VHT-LINK-ADAPT-$vht_link_adapt_hw]"
264 [ -n "$vht_capab" ] && append base_cfg "vht_capab=$vht_capab" "$N"
267 hostapd_prepare_device_config "$hostapd_conf_file" nl80211
268 cat >> "$hostapd_conf_file" <<EOF
269 ${channel:+channel=$channel}
270 ${noscan:+noscan=$noscan}
277 mac80211_hostapd_setup_bss() {
284 append hostapd_cfg "$type=$ifname" "$N"
286 hostapd_set_bss_options hostapd_cfg "$vif" || return 1
287 json_get_vars wds dtim_period max_listen_int
291 [ "$wds" -gt 0 ] && append hostapd_cfg "wds_sta=1" "$N"
292 [ "$staidx" -gt 0 ] && append hostapd_cfg "start_disabled=1" "$N"
294 cat >> /var/run/hostapd-$phy.conf <<EOF
297 ${dtim_period:+dtim_period=$dtim_period}
298 ${max_listen_int:+max_listen_interval=$max_listen_int}
302 mac80211_generate_mac() {
304 local id="${macidx:-0}"
306 local ref="$(cat /sys/class/ieee80211/${phy}/macaddress)"
307 local mask="$(cat /sys/class/ieee80211/${phy}/address_mask)"
309 [ "$mask" = "00:00:00:00:00:00" ] && mask="ff:ff:ff:ff:ff:ff";
310 local oIFS="$IFS"; IFS=":"; set -- $mask; IFS="$oIFS"
315 local oIFS="$IFS"; IFS=":"; set -- $ref; IFS="$oIFS"
318 [ "$((0x$mask1))" -gt 0 ] && {
321 b1=$(($b1 ^ ((($id - 1) << 2) | 0x2)))
322 printf "%02x:%s:%s:%s:%s:%s" $b1 $2 $3 $4 $5 $6
326 [ "$((0x$mask6))" -lt 255 ] && {
327 printf "%s:%s:%s:%s:%s:%02x" $1 $2 $3 $4 $5 $(( 0x$6 ^ $id ))
331 off2=$(( (0x$6 + $id) / 0x100 ))
332 printf "%s:%s:%s:%s:%02x:%02x" \
334 $(( (0x$5 + $off2) % 0x100 )) \
335 $(( (0x$6 + $id) % 0x100 ))
339 [ -n "$phy" -a -d /sys/class/ieee80211/$phy ] && return 0
340 [ -n "$path" -a -d "/sys/devices/$path/ieee80211" ] && {
341 phy="$(ls /sys/devices/$path/ieee80211 | grep -m 1 phy)"
342 [ -n "$phy" ] && return 0
344 [ -n "$macaddr" ] && {
345 for phy in $(ls /sys/class/ieee80211 2>/dev/null); do
346 grep -i -q "$macaddr" "/sys/class/ieee80211/${phy}/macaddress" && return 0
352 mac80211_check_ap() {
356 mac80211_prepare_vif() {
359 json_get_vars ifname mode ssid wds powersave macaddr
361 [ -n "$ifname" ] || ifname="wlan${phy#phy}${if_idx:+-$if_idx}"
362 if_idx=$((${if_idx:-0} + 1))
365 set_default powersave 0
369 [ -n "$macaddr" ] || {
370 macaddr="$(mac80211_generate_mac $phy)"
371 macidx="$(($macidx + 1))"
375 json_add_string ifname "$ifname"
379 # It is far easier to delete and create the desired interface
382 iw phy "$phy" interface add "$ifname" type adhoc
385 # Hostapd will handle recreating the interface and
386 # subsequent virtual APs belonging to the same PHY
387 if [ -n "$hostapd_ctrl" ]; then
393 mac80211_hostapd_setup_bss "$phy" "$ifname" "$macaddr" "$type" || return
395 [ -n "$hostapd_ctrl" ] || {
396 iw phy "$phy" interface add "$ifname" type managed
397 hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd/$ifname}"
401 json_get_vars key mesh_id
402 if [ -n "$key" ]; then
403 iw phy "$phy" interface add "$ifname" type mp
405 iw phy "$phy" interface add "$ifname" type mp mesh_id "$mesh_id"
409 iw phy "$phy" interface add "$ifname" type monitor
413 staidx="$(($staidx + 1))"
414 [ "$wds" -gt 0 ] && wdsflag="4addr on"
415 iw phy "$phy" interface add "$ifname" type managed $wdsflag
416 [ "$powersave" -gt 0 ] && powersave="on" || powersave="off"
417 iw "$ifname" set power_save "$powersave"
423 [ "$auto_channel" -gt 0 ] || iw dev "$ifname" set channel "$channel" $htmode
427 if [ "$mode" != "ap" ]; then
428 # ALL ap functionality will be passed to hostapd
429 # All interfaces must have unique mac addresses
430 # which can either be explicitly set in the device
431 # section, or automatically generated
432 ifconfig "$ifname" hw ether "$macaddr"
438 mac80211_setup_supplicant() {
439 wpa_supplicant_prepare_interface "$ifname" nl80211 || return 1
440 wpa_supplicant_add_network "$ifname"
441 wpa_supplicant_run "$ifname" ${hostapd_ctrl:+-H $hostapd_ctrl}
444 mac80211_setup_adhoc() {
445 json_get_vars bssid ssid key mcast_rate
448 [ "$auth_type" == "wep" ] && {
453 for idx in 1 2 3 4; do
454 json_get_var ikey "key$idx"
457 ikey="$(($idx - 1)):$(prepare_key_wep "$ikey")"
458 [ $idx -eq $key ] && ikey="d:$ikey"
459 append keyspec "$ikey"
464 append keyspec "d:0:$(prepare_key_wep "$key")"
470 for br in $basic_rate_list; do
471 hostapd_add_rate brstr "$br"
475 [ -n "$mcast_rate" ] && hostapd_add_rate mcval "$mcast_rate"
477 iw dev "$ifname" ibss join "$ssid" $freq $htmode fixed-freq $bssid \
478 ${beacon_int:+beacon-interval $beacon_int} \
479 ${brstr:+basic-rates $brstr} \
480 ${mcval:+mcast-rate $mcval} \
481 ${keyspec:+keys $keyspec}
484 mac80211_setup_vif() {
494 json_get_var vif_txpower txpower
496 ifconfig "$ifname" up || {
497 wireless_setup_vif_failed IFUP_ERROR
502 set_default vif_txpower "$txpower"
503 [ -z "$vif_txpower" ] || iw dev "$ifname" set txpower fixed "${vif_txpower%%.*}00"
507 for var in $MP_CONFIG_INT $MP_CONFIG_BOOL $MP_CONFIG_STRING; do
508 json_get_var mp_val "$var"
509 [ -n "$mp_val" ] && iw dev "$ifname" set mesh_param "$var" "$mp_val"
514 if [ -n "$key" ]; then
515 if [ -e "/lib/wifi/authsae.sh" ]; then
516 . /lib/wifi/authsae.sh
517 authsae_start_interface || failed=1
519 wireless_setup_vif_failed AUTHSAE_NOT_INSTALLED
526 wireless_vif_parse_encryption
527 if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ]; then
528 mac80211_setup_supplicant || failed=1
534 mac80211_setup_supplicant || failed=1
539 [ -n "$failed" ] || wireless_add_vif "$name" "$ifname"
545 iw "$phy" info | grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep MHz | awk '{print $2}'
548 mac80211_interface_cleanup() {
551 for wdev in $(list_phy_interfaces "$phy"); do
552 ifconfig "$wdev" down 2>/dev/null
557 drv_mac80211_cleanup() {
558 hostapd_common_cleanup
561 drv_mac80211_setup() {
565 country chanbw distance \
566 txpower antenna_gain \
567 rxantenna txantenna \
569 json_get_values basic_rate_list basic_rate
573 echo "Could not find PHY for device '$1'"
578 wireless_set_data phy="$phy"
579 mac80211_interface_cleanup "$phy"
581 # convert channel to frequency
582 [ "$auto_channel" -gt 0 ] || freq="$(get_freq "$phy" "$channel")"
584 [ -n "$country" ] && {
585 iw reg get | grep -q "^country $country:" || {
586 iw reg set "$country"
591 hostapd_conf_file="/var/run/hostapd-$phy.conf"
597 [ -n "$chanbw" ] && {
598 for file in /sys/kernel/debug/ieee80211/$phy/ath9k/chanbw /sys/kernel/debug/ieee80211/$phy/ath5k/bwmode; do
599 [ -f "$file" ] && echo "$chanbw" > "$file"
603 set_default rxantenna all
604 set_default txantenna all
605 set_default distance 0
606 set_default antenna_gain 0
608 iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1
609 iw phy "$phy" set antenna_gain $antenna_gain
610 iw phy "$phy" set distance "$distance"
612 [ -n "$frag" ] && iw phy "$phy" set frag "${frag%%.*}"
613 [ -n "$rts" ] && iw phy "$phy" set rts "${rts%%.*}"
617 for_each_interface "ap" mac80211_check_ap
619 rm -f "$hostapd_conf_file"
620 [ -n "$has_ap" ] && mac80211_hostapd_setup_base "$phy"
622 for_each_interface "sta adhoc mesh monitor" mac80211_prepare_vif
623 for_each_interface "ap" mac80211_prepare_vif
625 [ -n "$hostapd_ctrl" ] && {
626 /usr/sbin/hostapd -P /var/run/wifi-$phy.pid -B "$hostapd_conf_file"
628 wireless_add_process "$(cat /var/run/wifi-$phy.pid)" "/usr/sbin/hostapd" 1
630 wireless_setup_failed HOSTAPD_START_FAILED
635 for_each_interface "ap sta adhoc mesh monitor" mac80211_setup_vif
640 list_phy_interfaces() {
642 if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then
643 ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev/null;
645 ls "/sys/class/ieee80211/${phy}/device" 2>/dev/null | grep net: | sed -e 's,net:,,g'
649 drv_mac80211_teardown() {
650 wireless_process_kill_all
656 mac80211_interface_cleanup "$phy"