package/broadcom-wl/files/lib/wifi/broadcom.sh

   1 append DRIVERS "broadcom"
   2
   3 scan_broadcom() {
   4         local device="$1"
   5         local wds
   6         local adhoc sta apmode
   7         local adhoc_if sta_if ap_if
   8
   9         config_get vifs "$device" vifs
  10         for vif in $vifs; do
  11                 config_get mode "$vif" mode
  12                 case "$mode" in
  13                         adhoc)
  14                                 adhoc=1
  15                                 adhoc_if="$vif"
  16                         ;;
  17                         sta)
  18                                 sta=1
  19                                 sta_if="$vif"
  20                         ;;
  21                         ap)
  22                                 apmode=1
  23                                 ap_if="${ap_if:+$ap_if }$vif"
  24                         ;;
  25                         wds)
  26                                 config_get addr "$vif" bssid
  27                                 [ -z "$addr" ] || append wds "$addr"
  28                         ;;
  29                         *) echo "$device($vif): Invalid mode";;
  30                 esac
  31         done
  32         config_set "$device" wds "$wds"
  33
  34         local _c=
  35         for vif in ${adhoc_if:-$sta_if $ap_if}; do
  36                 config_set "$vif" ifname "wl0${_c:+.$_c}"
  37                 _c=$((${_c:-0} + 1))
  38         done
  39         config_set "$device" vifs "${adhoc_if:-$sta_if $ap_if}"
  40
  41         ifdown="down"
  42         for vif in 0 1 2 3; do
  43                 append ifdown "vif $vif" "$N"
  44                 append ifdown "enabled 0" "$N"
  45         done
  46
  47         ap=1
  48         infra=1
  49         mssid=1
  50         apsta=0
  51         radio=1
  52         case "$adhoc:$sta:$apmode" in
  53                 1*)
  54                         ap=0
  55                         mssid=0
  56                         infra=0
  57                 ;;
  58                 :1:1)
  59                         apsta=1
  60                         wet=1
  61                 ;;
  62                 :1:)
  63                         wet=1
  64                         ap=0
  65                         mssid=0
  66                 ;;
  67                 ::)
  68                         radio=0
  69                 ;;
  70         esac
  71 }
  72
  73 disable_broadcom() {
  74         wlc down
  75         (
  76                 include /lib/network
  77
  78                 # make sure the interfaces are down and removed from all bridges
  79                 for dev in wl0 wl0.1 wl0.2 wl0.3; do
  80                         ifconfig "$dev" down 2>/dev/null >/dev/null && {
  81                                 unbridge "$dev"
  82                         }
  83                 done
  84         )
  85         true
  86 }
  87
  88 enable_broadcom() {
  89         local _c
  90         config_get channel "$device" channel
  91         config_get country "$device" country
  92         config_get maxassoc "$device" maxassoc
  93         config_get wds "$device" wds
  94         config_get vifs "$device" vifs
  95         local vif_pre_up vif_post_up vif_do_up
  96
  97         _c=0
  98         nas="$(which nas)"
  99         nas_cmd=
 100         if_up=
 101         for vif in $vifs; do
 102                 append vif_pre_up "vif $_c" "$N"
 103                 append vif_post_up "vif $_c" "$N"
 104
 105                 [ "$vif" = "$sta_if" ] || {
 106                         config_get_bool hidden "$vif" hidden 1
 107                         append vif_pre_up "closed $hidden" "$N"
 108                         config_get_bool isolate "$vif" isolate
 109                         append vif_pre_up "ap_isolate $hidden" "$N"
 110                 }
 111
 112                 wsec_r=0
 113                 eap_r=0
 114                 wsec=0
 115                 auth=0
 116                 nasopts=
 117                 config_get enc "$vif" encryption
 118                 case "$enc" in
 119                         WEP|wep)
 120                                 wsec_r=1
 121                         ;;
 122                         *psk*|*PSK*)
 123                                 wsec_r=1
 124                                 config_get key "$vif" key
 125                                 case "$enc" in
 126                                         wpa2*|WPA2*|PSK2*|psk2*) auth=128; wsec=4;;
 127                                         *) auth=4; crypto=2;;
 128                                 esac
 129                                 eval "${vif}_key=\"\$key\""
 130                                 nasopts="-k \"\$${vif}_key\""
 131                         ;;
 132                         *wpa*|*WPA*)
 133                                 wsec_r=1
 134                                 eap_r=1
 135                                 config_get key "$vif" key
 136                                 config_get server "$vif" server
 137                                 config_get port "$vif" port
 138                                 case "$enc" in
 139                                         wpa2*|WPA2*) auth=64; wsec=4;;
 140                                         *) auth=2; crypto=2;;
 141                                 esac
 142                                 eval "${vif}_key=\"\$key\""
 143                                 nasopts="-r \"\$${vif}_key\" -h $server -p $port"
 144                         ;;
 145                 esac
 146                 append vif_post_up "wsec $wsec" "$N"
 147                 append vif_post_up "wpa_auth $auth" "$N"
 148                 append vif_post_up "wsec_restrict $wsec_r" "$N"
 149                 append vif_post_up "eap_restrict $eap_r" "$N"
 150
 151                 config_get ssid "$vif" ssid
 152                 append vif_post_up "vlan_mode 0"
 153                 append vif_post_up "ssid $ssid" "$N"
 154                 [ "$wet" = 1 -o "$apsta" = 1 -o "$ap" = 0 -o "$infra" = 0 ] && \
 155                         append vif_do_up "ssid $ssid" "$N"
 156
 157                 append vif_post_up "enabled 1" "$N"
 158
 159                 config_get ifname "$vif" ifname
 160                 append if_up "ifconfig $ifname up" ";$N"
 161                 net_cfg="$(find_net_config "$vif")"
 162                 [ -z "$net_cfg" ] || {
 163                         bridge="$(bridge_interface "$net_cfg")"
 164                         append if_up "start_net '$ifname' '$net_cfg'" ";$N"
 165                 }
 166                 [ -z "$nasopts" ] || {
 167                         eval "${vif}_ssid=\"\$ssid\""
 168                         mode="-A"
 169                         [ "$vif" = "$sta_if" ] && mode="-S"
 170                         [ -z "$nas" ] || nas_cmd="${nas_cmd:+$nas_cmd$N}$nas -P /var/run/nas.$ifname.pid -H 34954 ${bridge:+ -l $bridge} -i $ifname $mode -m $auth -w $crypto -s \"\$${vif}_ssid\" -g 3600 $nasopts &"
 171                 }
 172                 _c=$(($_c + 1))
 173         done
 174         killall -KILL nas >&- 2>&-
 175         wlc stdin <<EOF
 176 $ifdown
 177
 178 ap $ap
 179 mssid $mssid
 180 apsta $apsta
 181 infra $infra
 182 ${wet:+wet 1}
 183
 184 radio ${radio:-1}
 185 macfilter 0
 186 maclist none
 187 wds ${wds:-none}
 188 channel ${channel:-0}
 189 country ${country:-IL0}
 190 maxassoc ${maxassoc:-128}
 191
 192 $vif_pre_up
 193 up
 194 $vif_post_up
 195 EOF
 196         eval "$if_up"
 197         wlc stdin <<EOF
 198 $vif_do_up
 199 EOF
 200         eval "$nas_cmd"
 201 }
 202
 203
 204 detect_broadcom() {
 205         [ -f /proc/net/wl0 ] || return
 206         config_get type wl0 type
 207         [ "$type" = broadcom ] && return
 208         cat <<EOF
 209 config wifi-device  wl0
 210         option type     broadcom
 211         option channel  5
 212
 213 config wifi-iface
 214         option device   wl0
 215         option mode     ap
 216         option ssid     OpenWrt
 217         option hidden   0
 218         option encryption none
 219
 220 EOF
 221 }