Merge pull request #2259 from pmelange/luci-app-olsr-new-json-lib
[oweals/luci.git] / modules / luci-mod-system / luasrc / controller / admin / system.lua
1 -- Copyright 2008 Steven Barth <steven@midlink.org>
2 -- Copyright 2008-2011 Jo-Philipp Wich <jow@openwrt.org>
3 -- Licensed to the public under the Apache License 2.0.
4
5 module("luci.controller.admin.system", package.seeall)
6
7 function index()
8         local fs = require "nixio.fs"
9
10         entry({"admin", "system", "system"}, cbi("admin_system/system"), _("System"), 1)
11         entry({"admin", "system", "clock_status"}, post_on({ set = true }, "action_clock_status"))
12
13         entry({"admin", "system", "admin"}, cbi("admin_system/admin"), _("Administration"), 2)
14         entry({"admin", "system", "startup"}, form("admin_system/startup"), _("Startup"), 45)
15         entry({"admin", "system", "crontab"}, form("admin_system/crontab"), _("Scheduled Tasks"), 46)
16
17         if fs.access("/sbin/block") and fs.access("/etc/config/fstab") then
18                 entry({"admin", "system", "fstab"}, cbi("admin_system/fstab"), _("Mount Points"), 50)
19                 entry({"admin", "system", "fstab", "mount"}, cbi("admin_system/fstab/mount"), nil).leaf = true
20                 entry({"admin", "system", "fstab", "swap"},  cbi("admin_system/fstab/swap"),  nil).leaf = true
21         end
22
23         local nodes, number = fs.glob("/sys/class/leds/*")
24         if number > 0 then
25                 entry({"admin", "system", "leds"}, cbi("admin_system/leds"), _("<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"), 60)
26         end
27
28         entry({"admin", "system", "flashops"}, call("action_flashops"), _("Backup / Flash Firmware"), 70)
29         entry({"admin", "system", "flashops", "reset"}, post("action_reset"))
30         entry({"admin", "system", "flashops", "backup"}, post("action_backup"))
31         entry({"admin", "system", "flashops", "backupmtdblock"}, post("action_backupmtdblock"))
32         entry({"admin", "system", "flashops", "backupfiles"}, form("admin_system/backupfiles"))
33
34         -- call() instead of post() due to upload handling!
35         entry({"admin", "system", "flashops", "restore"}, call("action_restore"))
36         entry({"admin", "system", "flashops", "sysupgrade"}, call("action_sysupgrade"))
37
38         entry({"admin", "system", "reboot"}, template("admin_system/reboot"), _("Reboot"), 90)
39         entry({"admin", "system", "reboot", "call"}, post("action_reboot"))
40 end
41
42 function action_clock_status()
43         local set = tonumber(luci.http.formvalue("set"))
44         if set ~= nil and set > 0 then
45                 local date = os.date("*t", set)
46                 if date then
47                         luci.sys.call("date -s '%04d-%02d-%02d %02d:%02d:%02d'" %{
48                                 date.year, date.month, date.day, date.hour, date.min, date.sec
49                         })
50                         luci.sys.call("/etc/init.d/sysfixtime restart")
51                 end
52         end
53
54         luci.http.prepare_content("application/json")
55         luci.http.write_json({ timestring = os.date("%c") })
56 end
57
58 local function image_supported(image)
59         return (os.execute("sysupgrade -T %q >/dev/null" % image) == 0)
60 end
61
62 local function image_checksum(image)
63         return (luci.sys.exec("md5sum %q" % image):match("^([^%s]+)"))
64 end
65
66 local function image_sha256_checksum(image)
67         return (luci.sys.exec("sha256sum %q" % image):match("^([^%s]+)"))
68 end
69
70 local function supports_sysupgrade()
71         return nixio.fs.access("/lib/upgrade/platform.sh")
72 end
73
74 local function supports_reset()
75         return (os.execute([[grep -sq "^overlayfs:/overlay / overlay " /proc/mounts]]) == 0)
76 end
77
78 local function storage_size()
79         local size = 0
80         if nixio.fs.access("/proc/mtd") then
81                 for l in io.lines("/proc/mtd") do
82                         local d, s, e, n = l:match('^([^%s]+)%s+([^%s]+)%s+([^%s]+)%s+"([^%s]+)"')
83                         if n == "linux" or n == "firmware" then
84                                 size = tonumber(s, 16)
85                                 break
86                         end
87                 end
88         elseif nixio.fs.access("/proc/partitions") then
89                 for l in io.lines("/proc/partitions") do
90                         local x, y, b, n = l:match('^%s*(%d+)%s+(%d+)%s+([^%s]+)%s+([^%s]+)')
91                         if b and n and not n:match('[0-9]') then
92                                 size = tonumber(b) * 1024
93                                 break
94                         end
95                 end
96         end
97         return size
98 end
99
100
101 function action_flashops()
102         --
103         -- Overview
104         --
105         luci.template.render("admin_system/flashops", {
106                 reset_avail   = supports_reset(),
107                 upgrade_avail = supports_sysupgrade()
108         })
109 end
110
111 function action_sysupgrade()
112         local fs = require "nixio.fs"
113         local http = require "luci.http"
114         local image_tmp = "/tmp/firmware.img"
115
116         local fp
117         http.setfilehandler(
118                 function(meta, chunk, eof)
119                         if not fp and meta and meta.name == "image" then
120                                 fp = io.open(image_tmp, "w")
121                         end
122                         if fp and chunk then
123                                 fp:write(chunk)
124                         end
125                         if fp and eof then
126                                 fp:close()
127                         end
128                 end
129         )
130
131         if not luci.dispatcher.test_post_security() then
132                 fs.unlink(image_tmp)
133                 return
134         end
135
136         --
137         -- Cancel firmware flash
138         --
139         if http.formvalue("cancel") then
140                 fs.unlink(image_tmp)
141                 http.redirect(luci.dispatcher.build_url('admin/system/flashops'))
142                 return
143         end
144
145         --
146         -- Initiate firmware flash
147         --
148         local step = tonumber(http.formvalue("step")) or 1
149         if step == 1 then
150                 local force = http.formvalue("force")
151                 if image_supported(image_tmp) or force then
152                         luci.template.render("admin_system/upgrade", {
153                                 checksum = image_checksum(image_tmp),
154                                 sha256ch = image_sha256_checksum(image_tmp),
155                                 storage  = storage_size(),
156                                 size     = (fs.stat(image_tmp, "size") or 0),
157                                 keep     = (not not http.formvalue("keep")),
158                                 force    = (not not http.formvalue("force"))
159                         })
160                 else
161                         fs.unlink(image_tmp)
162                         luci.template.render("admin_system/flashops", {
163                                 reset_avail   = supports_reset(),
164                                 upgrade_avail = supports_sysupgrade(),
165                                 image_invalid = true
166                         })
167                 end
168
169         --
170         -- Start sysupgrade flash
171         --
172         elseif step == 2 then
173                 local keep = (http.formvalue("keep") == "1") and "" or "-n"
174                 local force = (http.formvalue("force") == "1") and "-F" or ""
175                 luci.template.render("admin_system/applyreboot", {
176                         title = luci.i18n.translate("Flashing..."),
177                         msg   = luci.i18n.translate("The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
178                         addr  = (#keep > 0) and (#force > 0) and "192.168.1.1" or nil
179                 })
180                 luci.sys.process.exec({ "/bin/sh", "-c","sleep 1; killall dropbear uhttpd; sleep 1; /sbin/sysupgrade %s %s %q" %{ keep, force, image_tmp } }, nil, nil, true)
181         end
182 end
183
184 function action_backup()
185         luci.http.header('Content-Disposition', 'attachment; filename="backup-%s-%s.tar.gz"'
186                 %{ luci.sys.hostname(), os.date("%Y-%m-%d") })
187
188         luci.http.prepare_content("application/x-targz")
189         luci.sys.process.exec({ "/sbin/sysupgrade", "--create-backup", "-" }, luci.http.write)
190 end
191
192 function action_backupmtdblock()
193         local mv = luci.http.formvalue("mtdblockname") or ""
194         local m, n = mv:match('^([^%s%./"]+)/%d+/(%d+)$')
195
196         if not m and n then
197                 luci.http.status(400, "Bad Request")
198                 return
199         end
200
201         luci.http.header('Content-Disposition', 'attachment; filename="backup-%s-%s-%s.bin"'
202                 %{ luci.sys.hostname(), m, os.date("%Y-%m-%d") })
203
204         luci.http.prepare_content("application/octet-stream")
205         luci.sys.process.exec({ "/bin/dd", "if=/dev/mtd%s" % n, "conv=fsync,notrunc" }, luci.http.write)
206 end
207
208 function action_restore()
209         local fs = require "nixio.fs"
210         local http = require "luci.http"
211         local archive_tmp = "/tmp/restore.tar.gz"
212
213         local fp
214         http.setfilehandler(
215                 function(meta, chunk, eof)
216                         if not fp and meta and meta.name == "archive" then
217                                 fp = io.open(archive_tmp, "w")
218                         end
219                         if fp and chunk then
220                                 fp:write(chunk)
221                         end
222                         if fp and eof then
223                                 fp:close()
224                         end
225                 end
226         )
227
228         if not luci.dispatcher.test_post_security() then
229                 fs.unlink(archive_tmp)
230                 return
231         end
232
233         local upload = http.formvalue("archive")
234         if upload and #upload > 0 then
235                 if os.execute("gunzip -t %q >/dev/null 2>&1" % archive_tmp) == 0 then
236                         luci.template.render("admin_system/applyreboot")
237                         os.execute("tar -C / -xzf %q >/dev/null 2>&1" % archive_tmp)
238                         luci.sys.reboot()
239                 else
240                         luci.template.render("admin_system/flashops", {
241                                 reset_avail   = supports_reset(),
242                                 upgrade_avail = supports_sysupgrade(),
243                                 backup_invalid = true
244                         })
245                 end
246                 return
247         end
248
249         http.redirect(luci.dispatcher.build_url('admin/system/flashops'))
250 end
251
252 function action_reset()
253         if supports_reset() then
254                 luci.template.render("admin_system/applyreboot", {
255                         title = luci.i18n.translate("Erasing..."),
256                         msg   = luci.i18n.translate("The system is erasing the configuration partition now and will reboot itself when finished."),
257                         addr  = "192.168.1.1"
258                 })
259
260                 luci.sys.process.exec({ "/bin/sh", "-c", "sleep 1; killall dropbear uhttpd; sleep 1; jffs2reset -y && reboot" }, nil, nil, true)
261                 return
262         end
263
264         http.redirect(luci.dispatcher.build_url('admin/system/flashops'))
265 end
266
267 function action_passwd()
268         local p1 = luci.http.formvalue("pwd1")
269         local p2 = luci.http.formvalue("pwd2")
270         local stat = nil
271
272         if p1 or p2 then
273                 if p1 == p2 then
274                         stat = luci.sys.user.setpasswd("root", p1)
275                 else
276                         stat = 10
277                 end
278         end
279
280         luci.template.render("admin_system/passwd", {stat=stat})
281 end
282
283 function action_reboot()
284         luci.sys.reboot()
285 end