3 "Content-Type: text/plain; charset=UTF-8\n"
4 "Last-Translator: Hsing-Wang Liao <kuoruan@gmail.com>\n"
9 msgid "%s is untagged in multiple VLANs!"
10 msgstr "%s 在多个 VLAN 中均未标记!"
12 msgid "(%d minute window, %d second interval)"
13 msgstr "(最近 %d 分钟信息,每 %d 秒刷新)"
15 msgid "(%s available)"
21 msgid "(no interfaces attached)"
24 msgid "-- Additional Field --"
27 msgid "-- Please choose --"
33 msgid "-- match by device --"
36 msgid "-- match by label --"
39 msgid "-- match by uuid --"
40 msgstr "-- 根据 UUID 匹配 --"
42 msgid "-- please select --"
45 msgid "1 Minute Load:"
48 msgid "15 Minute Load:"
51 msgid "4-character hexadecimal ID"
54 msgid "464XLAT (CLAT)"
55 msgstr "464XLAT (CLAT)"
57 msgid "5 Minute Load:"
60 msgid "6-octet identifier as a hex string - no colons"
61 msgstr "十六进制表示的 6 字节标识符,无冒号分隔"
63 msgid "802.11r Fast Transition"
66 msgid "802.11w Association SA Query maximum timeout"
67 msgstr "802.11w 关联 SA 查询最大超时"
69 msgid "802.11w Association SA Query retry timeout"
70 msgstr "802.11w 关联 SA 查询重试超时"
72 msgid "802.11w Management Frame Protection"
73 msgstr "802.11w 管理帧保护"
75 msgid "802.11w maximum timeout"
78 msgid "802.11w retry timeout"
81 msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
82 msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
84 msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
85 msgstr "<abbr title=\"Domain Name System\">DNS</abbr> 查询端口"
87 msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
88 msgstr "<abbr title=\"Domain Name System\">DNS</abbr> 服务器端口"
91 "<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
92 "order of the resolvfile"
94 "按照“解析文件”里的顺序查询 <abbr title=\"Domain Name System\">DNS</abbr> 服务"
97 msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
98 msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
100 msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
101 msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr> 地址"
103 msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
104 msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr> 网关"
106 msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
107 msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr> 子网掩码"
110 "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
113 "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr> 地址或网段(CIDR)"
115 msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
116 msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr> 网关"
118 msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Suffix (hex)"
120 "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr> 后缀(十六进制)"
122 msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
123 msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> 配置"
125 msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
126 msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> 名称"
128 msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
129 msgstr "<abbr title=\"Media Access Control\">MAC</abbr> 地址"
131 msgid "<abbr title=\"The DHCP Unique Identifier\">DUID</abbr>"
135 "<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
136 "Protocol\">DHCP</abbr> leases"
138 "最大 <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> 租约数量"
141 "<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
142 "Domain Name System\">EDNS0</abbr> packet size"
144 "最大 <abbr title=\"Extension Mechanisms for Domain Name System\">EDNS0</"
147 msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
150 msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
151 msgstr "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
154 "<br/>Note: you need to manually restart the cron service if the crontab file "
155 "was empty before editing."
157 "<br/>注意:如果 crontab 文件在编辑前为空,则需要手动重新启动 cron 服务。"
159 msgid "A43C + J43 + A43"
160 msgstr "A43C + J43 + A43"
162 msgid "A43C + J43 + A43 + V43"
163 msgstr "A43C + J43 + A43 + V43"
174 msgid "ARP retry threshold"
177 msgid "ATM (Asynchronous Transfer Mode)"
183 msgid "ATM Virtual Channel Identifier (VCI)"
184 msgstr "ATM 虚拟通道标识(VCI)"
186 msgid "ATM Virtual Path Identifier (VPI)"
187 msgstr "ATM 虚拟路径标识(VPI)"
190 "ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
191 "Linux network interfaces which can be used in conjunction with DHCP or PPP "
192 "to dial into the provider network."
194 "ATM 桥是以 AAL5 协议封装以太网的虚拟 Linux 网桥,用于协同 DHCP 或 PPP 来拨号"
197 msgid "ATM device number"
200 msgid "ATU-C System Vendor ID"
201 msgstr "ATU-C 系统供应商 ID"
203 msgid "Access Concentrator"
212 msgid "Activate this network"
215 msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
216 msgstr "活动的 <abbr title=\"Internet Protocol Version 4\">IPv4</abbr> 路由"
218 msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
219 msgstr "活动的 <abbr title=\"Internet Protocol Version 6\">IPv6</abbr> 路由"
221 msgid "Active Connections"
224 msgid "Active DHCP Leases"
225 msgstr "已分配的 DHCP 租约"
227 msgid "Active DHCPv6 Leases"
228 msgstr "已分配的 DHCPv6 租约"
236 msgid "Add local domain suffix to names served from hosts files"
237 msgstr "添加本地域名后缀到 HOSTS 文件中的域名"
239 msgid "Add new interface..."
242 msgid "Additional Hosts files"
243 msgstr "额外的 HOSTS 文件"
245 msgid "Additional servers file"
246 msgstr "额外的 SERVERS 文件"
251 msgid "Address to access local relay bridge"
254 msgid "Administration"
257 msgid "Advanced Settings"
260 msgid "Aggregate Transmit Power(ACTATP)"
261 msgstr "总发射功率(ACTATP)"
267 "Allocate IP addresses sequentially, starting from the lowest available "
269 msgstr "从最低可用地址开始顺序分配 IP 地址"
271 msgid "Allocate IP sequentially"
274 msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
275 msgstr "允许 <abbr title=\"Secure Shell\">SSH</abbr> 密码验证"
277 msgid "Allow all except listed"
280 msgid "Allow legacy 802.11b rates"
281 msgstr "允许传统的 802.11b 速率"
283 msgid "Allow listed only"
286 msgid "Allow localhost"
289 msgid "Allow remote hosts to connect to local SSH forwarded ports"
290 msgstr "允许远程主机连接到本地 SSH 转发端口"
292 msgid "Allow root logins with password"
293 msgstr "允许 root 用户凭密码登录"
295 msgid "Allow the <em>root</em> user to login with password"
296 msgstr "允许 <em>root</em> 用户凭密码登录"
299 "Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
300 msgstr "允许 127.0.0.0/8 回环范围内的上行响应,例如:RBL 服务"
305 msgid "Always announce default router"
311 msgid "Annex A + L + M (all)"
312 msgstr "Annex A + L + M(全部)"
314 msgid "Annex A G.992.1"
315 msgstr "Annex A G.992.1"
317 msgid "Annex A G.992.2"
318 msgstr "Annex A G.992.2"
320 msgid "Annex A G.992.3"
321 msgstr "Annex A G.992.3"
323 msgid "Annex A G.992.5"
324 msgstr "Annex A G.992.5"
326 msgid "Annex B (all)"
329 msgid "Annex B G.992.1"
330 msgstr "Annex B G.992.1"
332 msgid "Annex B G.992.3"
333 msgstr "Annex B G.992.3"
335 msgid "Annex B G.992.5"
336 msgstr "Annex B G.992.5"
338 msgid "Annex J (all)"
341 msgid "Annex L G.992.3 POTS 1"
342 msgstr "Annex L G.992.3 POTS 1"
344 msgid "Annex M (all)"
347 msgid "Annex M G.992.3"
348 msgstr "Annex M G.992.3"
350 msgid "Annex M G.992.5"
351 msgstr "Annex M G.992.5"
353 msgid "Announce as default router even if no public prefix is available."
354 msgstr "即使没有可用的公网前缀,也仍通告自己为默认路由。"
356 msgid "Announced DNS domains"
359 msgid "Announced DNS servers"
362 msgid "Anonymous Identity"
365 msgid "Anonymous Mount"
366 msgstr "自动挂载未配置的磁盘分区"
368 msgid "Anonymous Swap"
369 msgstr "自动挂载未配置的 Swap 分区"
377 msgid "Antenna Configuration"
383 msgid "Apply request failed with status <code>%h</code>"
384 msgstr "应用请求失败,状态 <code>%h</code>"
386 msgid "Apply unchecked"
393 "Assign a part of given length of every public IPv6-prefix to this interface"
394 msgstr "将每个公共 IPv6 前缀的给定长度部分分配给此接口"
396 msgid "Assign interfaces..."
400 "Assign prefix parts using this hexadecimal subprefix ID for this interface."
401 msgstr "将此十六进制子 ID 前缀分配给此接口"
403 msgid "Associated Stations"
412 msgid "Authentication"
415 msgid "Authentication Type"
418 msgid "Authoritative"
421 msgid "Authorization Required"
430 msgid "Automatic Homenet (HNCP)"
431 msgstr "自动家庭网络(HNCP)"
433 msgid "Automatically check filesystem for errors before mounting"
434 msgstr "在挂载前自动检查文件系统错误"
436 msgid "Automatically mount filesystems on hotplug"
437 msgstr "通过 hotplug 自动挂载磁盘"
439 msgid "Automatically mount swap on hotplug"
440 msgstr "通过 hotplug 自动挂载 swap 分区"
442 msgid "Automount Filesystem"
445 msgid "Automount Swap"
451 msgid "Available packages"
460 msgid "B43 + B43C + V43"
461 msgstr "B43 + B43C + V43"
463 msgid "BR / DMR / AFTR"
464 msgstr "BR / DMR / AFTR"
472 msgid "Back to Overview"
475 msgid "Back to configuration"
478 msgid "Back to overview"
481 msgid "Back to scan results"
484 msgid "Backup / Flash Firmware"
487 msgid "Backup / Restore"
490 msgid "Backup file list"
493 msgid "Bad address specified!"
500 "Below is the determined list of files to backup. It consists of changed "
501 "configuration files marked by opkg, essential base files and the user "
502 "defined backup patterns."
504 "下面是待备份的文件清单。包含了更改的配置文件、必要的基础文件和用户自定义的需"
507 msgid "Bind interface"
510 msgid "Bind only to specific interfaces rather than wildcard address."
511 msgstr "仅绑定到特定接口,而不是全部地址。"
513 msgid "Bind the tunnel to this interface (optional)."
514 msgstr "将隧道绑定到此接口(可选)。"
519 msgid "Bogus NX Domain Override"
525 msgid "Bridge interfaces"
528 msgid "Bridge unit number"
531 msgid "Bring up on boot"
534 msgid "Broadcom 802.11%s Wireless Controller"
535 msgstr "Broadcom 802.11%s 无线控制器"
537 msgid "Broadcom BCM%04x 802.11 Wireless Controller"
538 msgstr "Broadcom BCM%04x 802.11 无线控制器"
544 "Build/distribution specific feed definitions. This file will NOT be "
545 "preserved in any sysupgrade."
546 msgstr "由固件指定的软件源。此处的设置在任何系统升级中都不会被保留。"
548 msgid "CA certificate; if empty it will be saved after the first connection."
549 msgstr "CA 证书,如果留空,则证书将在第一次连接后被保存。"
551 msgid "CPU usage (%)"
566 msgid "Changes applied."
569 msgid "Changes have been reverted."
572 msgid "Changes the administrator password for accessing the device"
573 msgstr "修改访问设备的管理员密码"
579 "Channel %d is not available in the %s regulatory domain and has been auto-"
581 msgstr "信道 %d 在 %s 监管区域内不可用并已自动调整到 %d。"
586 msgid "Check filesystems before mount"
589 msgid "Check this option to delete the existing networks from this radio."
590 msgstr "选中此选项以从无线中删除现有网络。"
596 "Choose the firewall zone you want to assign to this interface. Select "
597 "<em>unspecified</em> to remove the interface from the associated zone or "
598 "fill out the <em>create</em> field to define a new zone and attach the "
601 "为此接口分配所属的防火墙区域,选择“不指定”可将该接口移出已关联的区域,或者填"
602 "写“创建”栏来创建一个新的区域,并将当前接口与之建立关联。"
605 "Choose the network(s) you want to attach to this wireless interface or fill "
606 "out the <em>create</em> field to define a new network."
607 msgstr "选择指派到此无线接口的网络,或者填写“创建”栏来新建网络。"
612 msgid "Cisco UDP encapsulation"
613 msgstr "Cisco UDP 封装"
616 "Click \"Generate archive\" to download a tar archive of the current "
617 "configuration files. To reset the firmware to its initial state, click "
618 "\"Perform reset\" (only possible with squashfs images)."
620 "点击“生成备份”下载当前配置文件的 tar 存档。要将固件恢复到初始状态,请单击“执"
621 "行重置”(仅 squashfs 格式的固件有效)。"
626 msgid "Client ID to send when requesting DHCP"
627 msgstr "请求 DHCP 时发送的客户端 ID"
630 "Close inactive connection after the given amount of seconds, use 0 to "
632 msgstr "在给定时间(秒)后关闭非活动链接,0 为保持连接"
634 msgid "Close list..."
637 msgid "Collecting data..."
643 msgid "Common Configuration"
647 "Complicates key reinstallation attacks on the client side by disabling "
648 "retransmission of EAPOL-Key frames that are used to install keys. This "
649 "workaround might cause interoperability issues and reduced robustness of key "
650 "negotiation especially in environments with heavy traffic load."
652 "通过禁用用于安装密钥的 EAPOL-Key 帧的重新传输,来增加客户端密钥重安装攻击的复"
653 "杂度。此解决方法可能会导致互操作性问题,并降低密钥协商的可靠性,特别是在流量"
656 msgid "Configuration"
659 msgid "Configuration files will be kept."
662 msgid "Configuration has been applied."
665 msgid "Configuration has been rolled back!"
677 msgid "Connection Limit"
684 "Could not regain access to the device after applying the configuration "
685 "changes. You might need to reconnect if you modified network related "
686 "settings such as the IP address or wireless security credentials."
688 "应用配置更改后,无法重新获得对设备的访问权限。如果您修改了网络相关设置如 IP "
689 "地址或无线安全证书,则可能需要重新连接。"
697 msgid "Cover the following interface"
700 msgid "Cover the following interfaces"
703 msgid "Create / Assign firewall-zone"
706 msgid "Create Interface"
709 msgid "Create a bridge over multiple interfaces"
715 msgid "Cron Log Level"
718 msgid "Custom Interface"
721 msgid "Custom delegated IPv6-prefix"
722 msgstr "自定义分配的 IPv6 前缀"
725 "Custom feed definitions, e.g. private feeds. This file can be preserved in a "
727 msgstr "自定义软件源地址,例如:私有的软件源。此文件在系统升级时将被保留。"
733 "Custom files (certificates, scripts) may remain on the system. To prevent "
734 "this, perform a factory-reset first."
736 "自定义文件(证书、脚本)会保留在系统上。若无需保留,请先执行恢复出厂设置。"
739 "Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
740 "\">LED</abbr>s if possible."
741 msgstr "自定义此设备的 <abbr title=\"Light Emitting Diode\">LED</abbr> 行为。"
755 msgid "DHCPv6 client"
761 msgid "DHCPv6-Service"
767 msgid "DNS forwardings"
770 msgid "DNS-Label / FQDN"
771 msgstr "DNS-Label / FQDN"
776 msgid "DNSSEC check unsigned"
777 msgstr "DNSSEC 检查未签名"
779 msgid "DPD Idle Timeout"
782 msgid "DS-Lite AFTR address"
783 msgstr "DS-Lite AFTR 地址"
791 msgid "DSL line mode"
806 msgid "Default gateway"
809 msgid "Default is stateless + stateful"
810 msgstr "默认是无状态的 + 有状态的"
812 msgid "Default state"
815 msgid "Define a name for this network."
819 "Define additional DHCP options, for example "
820 "\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
821 "servers to clients."
823 "设置 DHCP 的附加选项,例如设定 \"<code>6,192.168.2.1,192.168.2.2</code>\" 表"
824 "示通告不同的 DNS 服务器给客户端。"
829 msgid "Delete this network"
844 msgid "Device Configuration"
847 msgid "Device is rebooting..."
850 msgid "Device unreachable"
853 msgid "Device unreachable!"
869 "Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
872 "不在此接口提供 <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
875 msgid "Disable DNS setup"
878 msgid "Disable Encryption"
884 msgid "Disabled (default)"
887 msgid "Discard upstream RFC1918 responses"
888 msgstr "丢弃 RFC1918 上行响应数据"
893 msgid "Displaying only packages containing"
896 msgid "Distance Optimization"
899 msgid "Distance to farthest network member in meters."
900 msgstr "最远网络用户的距离(米)。"
902 msgid "Distribution feeds"
909 "Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
910 "\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
911 "Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
914 "Dnsmasq 为 <abbr title=\"Network Address Translation\">NAT</abbr> 防火墙提供"
915 "了一个集成的 <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
916 "服务器和 <abbr title=\"Domain Name System\">DNS</abbr> 转发器"
918 msgid "Do not cache negative replies, e.g. for not existing domains"
919 msgstr "不缓存无用的回应, 比如:不存在的域名"
921 msgid "Do not forward requests that cannot be answered by public name servers"
922 msgstr "不转发公共域名服务器无法回应的请求"
924 msgid "Do not forward reverse lookups for local networks"
925 msgstr "不转发本地网络的反向查询"
927 msgid "Domain required"
930 msgid "Domain whitelist"
933 msgid "Don't Fragment"
937 "Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
938 "<abbr title=\"Domain Name System\">DNS</abbr>-Name"
940 "不转发没有 <abbr title=\"Domain Name System\">DNS</abbr> 名称的解析请求"
945 msgid "Download and install package"
948 msgid "Download backup"
951 msgid "Downstream SNR offset"
954 msgid "Dropbear Instance"
958 "Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
959 "and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
961 "Dropbear 提供 <abbr title=\"Secure Shell\">SSH</abbr> 访问和 <abbr title="
962 "\"Secure Copy\">SCP</abbr> 服务"
964 msgid "Dual-Stack Lite (RFC6333)"
965 msgstr "Dual-Stack Lite (RFC6333)"
967 msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
968 msgstr "动态 <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
970 msgid "Dynamic tunnel"
974 "Dynamically allocate DHCP addresses for clients. If disabled, only clients "
975 "having static leases will be served."
977 "为所有客户端提供 DHCP 服务。如果禁用,将只对具有静态租约的客户提供服务。"
979 msgid "EA-bits length"
989 "Edit the raw configuration data above to fix any error and hit \"Save\" to "
991 msgstr "编辑上方的原始配置数据来修复错误,点击“保存”按钮以重新载入此页面。"
993 msgid "Edit this interface"
996 msgid "Edit this network"
1006 "Enable <abbr title=\"Internet Group Management Protocol\">IGMP</abbr> "
1009 "启用 <abbr title=\"Internet Group Management Protocol\">IGMP</abbr> 窥探"
1011 msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
1012 msgstr "开启 <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
1014 msgid "Enable HE.net dynamic endpoint update"
1015 msgstr "启用 HE.net 动态终端更新"
1017 msgid "Enable IPv6 negotiation"
1020 msgid "Enable IPv6 negotiation on the PPP link"
1021 msgstr "在 PPP 链路上启用 IPv6 协商"
1023 msgid "Enable Jumbo Frame passthrough"
1026 msgid "Enable NTP client"
1029 msgid "Enable Single DES"
1032 msgid "Enable TFTP server"
1033 msgstr "启用 TFTP 服务器"
1035 msgid "Enable VLAN functionality"
1038 msgid "Enable WPS pushbutton, requires WPA(2)-PSK"
1039 msgstr "启用 WPS 一键加密按钮,需要 WPA(2)-PSK"
1041 msgid "Enable key reinstallation (KRACK) countermeasures"
1042 msgstr "启用密钥重新安装(KRACK)对策"
1044 msgid "Enable learning and aging"
1047 msgid "Enable mirroring of incoming packets"
1050 msgid "Enable mirroring of outgoing packets"
1053 msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
1054 msgstr "启用后报文的 DF(禁止分片)标志。"
1056 msgid "Enable this mount"
1059 msgid "Enable this network"
1062 msgid "Enable this swap"
1063 msgstr "启用此 swap 分区"
1065 msgid "Enable/Disable"
1071 msgid "Enables IGMP snooping on this bridge"
1072 msgstr "在此桥接上启用 IGMP 窥探"
1075 "Enables fast roaming among access points that belong to the same Mobility "
1077 msgstr "启用属于同一移动域的接入点之间的快速漫游"
1079 msgid "Enables the Spanning Tree Protocol on this bridge"
1080 msgstr "在此桥接上启用生成树协议"
1082 msgid "Encapsulation mode"
1088 msgid "Endpoint Host"
1091 msgid "Endpoint Port"
1094 msgid "Enter custom value"
1097 msgid "Enter custom values"
1106 msgid "Errored seconds (ES)"
1109 msgid "Ethernet Adapter"
1112 msgid "Ethernet Switch"
1115 msgid "Exclude interfaces"
1118 msgid "Expand hosts"
1119 msgstr "扩展 HOSTS 文件中的主机后缀"
1125 "Expiry time of leased addresses, minimum is 2 minutes (<code>2m</code>)."
1126 msgstr "租用地址的到期时间,最短 2 分钟(<code>2m</code>)。"
1131 msgid "External R0 Key Holder List"
1132 msgstr "外部 <abbr title=\"R0 Key Holder\">R0KH</abbr> 列表"
1134 msgid "External R1 Key Holder List"
1135 msgstr "外部 <abbr title=\"R1 Key Holder\">R1KH</abbr> 列表"
1137 msgid "External system log server"
1138 msgstr "外部系统日志服务器地址"
1140 msgid "External system log server port"
1141 msgstr "外部系统日志服务器端口"
1143 msgid "External system log server protocol"
1144 msgstr "外部系统日志服务器协议"
1146 msgid "Extra SSH command options"
1147 msgstr "额外的 SSH 命令选项"
1152 msgid "FT over the Air"
1158 msgid "Failed to confirm apply within %ds, waiting for rollback…"
1159 msgstr "在 %d 秒内确认应用失败,等待回滚..."
1164 msgid "Filename of the boot image advertised to clients"
1165 msgstr "向客户端通告的启动镜像文件名"
1173 msgid "Filter private"
1176 msgid "Filter useless"
1180 "Find all currently attached filesystems and swap and replace configuration "
1181 "with defaults based on what was detected"
1182 msgstr "查找当前系统上的所有分区和 swap 设备,并根据查找结果生成并替换现有配置"
1184 msgid "Find and join network"
1187 msgid "Find package"
1196 msgid "Firewall Mark"
1199 msgid "Firewall Settings"
1202 msgid "Firewall Status"
1205 msgid "Firmware File"
1208 msgid "Firmware Version"
1211 msgid "Fixed source port for outbound DNS queries"
1212 msgstr "指定的 DNS 查询源端口"
1214 msgid "Flash Firmware"
1217 msgid "Flash image..."
1220 msgid "Flash new firmware image"
1223 msgid "Flash operations"
1232 msgid "Force CCMP (AES)"
1233 msgstr "强制 CCMP(AES)"
1235 msgid "Force DHCP on this network even if another server is detected."
1236 msgstr "即使检测到另一台服务器,也要强制使用此网络上的 DHCP。"
1241 msgid "Force TKIP and CCMP (AES)"
1242 msgstr "强制 TKIP 和 CCMP(AES)"
1247 msgid "Force use of NAT-T"
1250 msgid "Form token mismatch"
1253 msgid "Forward DHCP traffic"
1254 msgstr "转发 DHCP 数据包"
1256 msgid "Forward Error Correction Seconds (FECS)"
1257 msgstr "前向纠错秒数(FECS)"
1259 msgid "Forward broadcast traffic"
1262 msgid "Forward mesh peer traffic"
1263 msgstr "转发 mesh 节点数据包"
1265 msgid "Forwarding mode"
1268 msgid "Fragmentation Threshold"
1271 msgid "Frame Bursting"
1281 "Further information about WireGuard interfaces and peers at <a href=\"http://"
1282 "wireguard.com\">wireguard.com</a>."
1284 "有关 WireGuard 接口和 Peer 的更多信息:<a href=\"http://wireguard.com"
1285 "\">wireguard.com</a>。"
1296 msgid "Gateway ports"
1299 msgid "General Settings"
1302 msgid "General Setup"
1305 msgid "General options for opkg"
1308 msgid "Generate Config"
1311 msgid "Generate PMK locally"
1314 msgid "Generate archive"
1317 msgid "Generic 802.11%s Wireless Controller"
1318 msgstr "通用 802.11%s 无线控制器"
1320 msgid "Given password confirmation did not match, password not changed!"
1321 msgstr "由于密码验证不匹配,密码没有更改!"
1323 msgid "Global Settings"
1326 msgid "Global network options"
1329 msgid "Go to password configuration..."
1330 msgstr "跳转到密码配置页..."
1332 msgid "Go to relevant configuration page"
1335 msgid "Group Password"
1341 msgid "HE.net password"
1344 msgid "HE.net username"
1347 msgid "HT mode (802.11n)"
1348 msgstr "HT 模式(802.11n)"
1353 msgid "Header Error Code Errors (HEC)"
1354 msgstr "请求头错误代码错误(HEC)"
1357 "Here you can configure the basic aspects of your device like its hostname or "
1359 msgstr "配置路由器的部分基础信息。"
1362 "Here you can paste public SSH-Keys (one per line) for SSH public-key "
1364 msgstr "请在此处粘贴 SSH 公钥,每行一个,用于 SSH 公钥认证。"
1366 msgid "Hermes 802.11b Wireless Controller"
1367 msgstr "Hermes 802.11b 无线控制器"
1369 msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
1370 msgstr "隐藏 <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
1375 msgid "Host entries"
1378 msgid "Host expiry timeout"
1381 msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
1382 msgstr "主机 <abbr title=\"Internet Protocol Address\">IP</abbr> 或网络"
1387 msgid "Hostname to send when requesting DHCP"
1388 msgstr "请求 DHCP 时发送的主机名"
1396 msgid "IKE DH Group"
1399 msgid "IP Addresses"
1408 msgid "IPv4 Firewall"
1411 msgid "IPv4 Upstream"
1414 msgid "IPv4 address"
1417 msgid "IPv4 and IPv6"
1418 msgstr "IPv4 和 IPv6"
1420 msgid "IPv4 assignment length"
1423 msgid "IPv4 broadcast"
1426 msgid "IPv4 gateway"
1429 msgid "IPv4 netmask"
1438 msgid "IPv4 prefix length"
1439 msgstr "IPv4 地址前缀长度"
1441 msgid "IPv4-Address"
1444 msgid "IPv4-in-IPv4 (RFC2003)"
1445 msgstr "IPv4-in-IPv4 (RFC2003)"
1450 msgid "IPv6 Firewall"
1453 msgid "IPv6 Neighbours"
1456 msgid "IPv6 Settings"
1459 msgid "IPv6 ULA-Prefix"
1460 msgstr "IPv6 ULA 前缀"
1462 msgid "IPv6 Upstream"
1465 msgid "IPv6 address"
1468 msgid "IPv6 assignment hint"
1471 msgid "IPv6 assignment length"
1474 msgid "IPv6 gateway"
1483 msgid "IPv6 prefix length"
1484 msgstr "IPv6 地址前缀长度"
1486 msgid "IPv6 routed prefix"
1492 msgid "IPv6-Address"
1498 msgid "IPv6-in-IPv4 (RFC4213)"
1499 msgstr "IPv6-in-IPv4 (RFC4213)"
1501 msgid "IPv6-over-IPv4 (6rd)"
1502 msgstr "IPv6-over-IPv4 (6rd)"
1504 msgid "IPv6-over-IPv4 (6to4)"
1505 msgstr "IPv6-over-IPv4 (6to4)"
1510 msgid "If checked, 1DES is enabled"
1513 msgid "If checked, encryption is disabled"
1517 "If specified, mount the device by its UUID instead of a fixed device node"
1518 msgstr "如果指定,则通过 UUID 而不是固定的设备文件来挂载设备"
1521 "If specified, mount the device by the partition label instead of a fixed "
1523 msgstr "如果指定,则通过分区卷标而不是固定的设备文件来挂载设备"
1525 msgid "If unchecked, no default route is configured"
1528 msgid "If unchecked, the advertised DNS server addresses are ignored"
1529 msgstr "留空则忽略所通告的 DNS 服务器地址"
1532 "If your physical memory is insufficient unused data can be temporarily "
1533 "swapped to a swap-device resulting in a higher amount of usable <abbr title="
1534 "\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
1535 "slow process as the swap-device cannot be accessed with the high datarates "
1536 "of the <abbr title=\"Random Access Memory\">RAM</abbr>."
1538 "如果物理内存不足,闲置数据可自动移到 swap 区暂存,以增加可用的 <abbr title="
1539 "\"Random Access Memory\">RAM</abbr>。请注意:swap 区的数据处理会非常慢,因为 "
1540 "swap 设备无法像 <abbr title=\"Random Access Memory\">RAM</abbr> 这样的高速率"
1543 msgid "Ignore <code>/etc/hosts</code>"
1544 msgstr "忽略 <code>/etc/hosts</code>"
1546 msgid "Ignore interface"
1549 msgid "Ignore resolve file"
1559 "In order to prevent unauthorized access to the system, your request has been "
1560 "blocked. Click \"Continue »\" below to return to the previous page."
1562 "为了防止未经授权访问系统,您的请求已被阻止。点击下面的 “继续 »” 来返回上一"
1565 msgid "Inactivity timeout"
1583 msgid "Install iputils-traceroute6 for IPv6 traceroute"
1584 msgstr "安装 iputils-traceroute6 以进行 IPv6 路由追踪"
1586 msgid "Install package %q"
1589 msgid "Install protocol extensions..."
1592 msgid "Installed packages"
1598 msgid "Interface %q device auto-migrated from %q to %q."
1599 msgstr "接口设备 %q 从 %q 自动迁移到了 %q。"
1601 msgid "Interface Configuration"
1604 msgid "Interface Overview"
1607 msgid "Interface is reconnecting..."
1608 msgstr "正在重新连接接口..."
1610 msgid "Interface is shutting down..."
1613 msgid "Interface name"
1616 msgid "Interface not present or not connected yet."
1619 msgid "Interface reconnected"
1622 msgid "Interface shut down"
1631 msgid "Internal Server Error"
1637 msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
1638 msgstr "无效的 VLAN ID!只有 %d 和 %d 之间的 ID 有效。"
1640 msgid "Invalid VLAN ID given! Only unique IDs are allowed"
1641 msgstr "无效的 VLAN ID!只允许唯一的 ID"
1643 msgid "Invalid username and/or password! Please try again."
1644 msgstr "无效的用户名和/或密码!请重试。"
1646 msgid "Isolate Clients"
1650 "It appears that you are trying to flash an image that does not fit into the "
1651 "flash memory, please verify the image file!"
1652 msgstr "您尝试刷写的固件与本路由器不兼容,请重新验证固件文件。"
1654 msgid "JavaScript required!"
1655 msgstr "需要 JavaScript!"
1657 msgid "Join Network"
1660 msgid "Join Network: Wireless Scan"
1663 msgid "Joining Network: %q"
1666 msgid "Keep settings"
1672 msgid "Kernel Version"
1690 msgid "LCP echo failure threshold"
1693 msgid "LCP echo interval"
1705 msgid "Language and Style"
1717 msgid "Lease validity time"
1723 msgid "Leasetime remaining"
1726 msgid "Leave empty to autodetect"
1729 msgid "Leave empty to use the current WAN address"
1730 msgstr "留空则使用当前 WAN 地址"
1738 msgid "Limit DNS service to subnets interfaces on which we are serving DNS."
1739 msgstr "仅在网卡所属的子网中提供 DNS 服务。"
1741 msgid "Limit listening to these interfaces, and loopback."
1742 msgstr "仅监听这些接口和环回接口。"
1744 msgid "Line Attenuation (LATN)"
1760 "List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
1763 "将请求转发到的 <abbr title=\"Domain Name System\">DNS</abbr> 服务器列表"
1766 "List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
1767 "Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
1768 "(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
1769 "from the R0KH that the STA used during the Initial Mobility Domain "
1772 "同一移动域中的 R0KH 列表。<br />格式:MAC 地址,NAS 标识符,128 位密钥(十六"
1773 "进制字符串)。<br />在从初始移动域关联期间使用的 R0KH 中请求 PMK-R1 密钥时,"
1774 "该列表用于将 R0KH-ID(NAS 标识符)映射到目标 MAC 地址。"
1777 "List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
1778 "as 6 octets with colons,128-bit key as hex string. <br />This list is used "
1779 "to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
1780 "R0KH. This is also the list of authorized R1KHs in the MD that can request "
1783 "同一移动域中的 R1KH 列表。<br />格式:MAC 地址,R1KH-ID(包含冒号的 6 个八位"
1784 "字节),128 位密钥(十六进制字符串)。<br />当从 R0KH 发送 PMK-R1 键时,此列"
1785 "表用于将 R1KH-ID 映射到目标 MAC 地址。这也是可以请求 PMK-R1 键的 MD 中授权的 "
1788 msgid "List of SSH key files for auth"
1789 msgstr "用于认证的 SSH 密钥文件列表"
1791 msgid "List of domains to allow RFC1918 responses for"
1792 msgstr "允许 RFC1918 响应的域名列表"
1794 msgid "List of hosts that supply bogus NX domain results"
1795 msgstr "允许虚假空域名响应的服务器列表"
1797 msgid "Listen Interfaces"
1803 msgid "Listen only on the given interface or, if unspecified, on all"
1804 msgstr "仅监听指定的接口,未指定则监听全部"
1806 msgid "Listening port for inbound DNS queries"
1807 msgstr "入站 DNS 查询端口"
1812 msgid "Load Average"
1818 msgid "Local IP address to assign"
1819 msgstr "要分配的本地 IP 地址"
1821 msgid "Local IPv4 address"
1824 msgid "Local IPv6 address"
1827 msgid "Local Service Only"
1830 msgid "Local Startup"
1836 msgid "Local domain"
1840 "Local domain specification. Names matching this domain are never forwarded "
1841 "and are resolved from DHCP or hosts files only"
1842 msgstr "本地域名规则。与此域匹配的名称从不转发,仅从 DHCP 或 HOSTS 文件解析"
1844 msgid "Local domain suffix appended to DHCP names and hosts file entries"
1845 msgstr "本地域名后缀将添加到 DHCP 和 HOSTS 文件条目"
1847 msgid "Local server"
1851 "Localise hostname depending on the requesting subnet if multiple IPs are "
1853 msgstr "如果有多个 IP 可用,则根据请求来源的子网来本地化主机名"
1855 msgid "Localise queries"
1858 msgid "Locked to channel %s used by: %s"
1859 msgstr "信道道已被锁定为 %s,因为该信道被 %s 使用"
1861 msgid "Log output level"
1876 msgid "Loss of Signal Seconds (LOSS)"
1877 msgstr "信号丢失秒数(LOSS)"
1879 msgid "Lowest leased address as offset from the network address."
1880 msgstr "网络地址的起始分配基址。"
1885 msgid "MAC-Address Filter"
1894 msgid "MAP / LW4over6"
1895 msgstr "MAP / LW4over6"
1910 "Make sure to clone the root filesystem using something like the commands "
1912 msgstr "确保使用以下命令来复制根文件系统:"
1917 msgid "Max. Attainable Data Rate (ATTNDR)"
1918 msgstr "最大可达数据速率(ATTNDR)"
1920 msgid "Maximum allowed number of active DHCP leases"
1921 msgstr "允许的最大 DHCP 租用数"
1923 msgid "Maximum allowed number of concurrent DNS queries"
1924 msgstr "允许的最大并发 DNS 查询数"
1926 msgid "Maximum allowed size of EDNS.0 UDP packets"
1927 msgstr "允许的最大 EDNS.0 UDP 数据包大小"
1929 msgid "Maximum amount of seconds to wait for the modem to become ready"
1930 msgstr "调制解调器就绪的最大等待时间(秒)"
1933 "Maximum length of the name is 15 characters including the automatic protocol/"
1934 "bridge prefix (br-, 6in4-, pppoe- etc.)"
1936 "名称的最大长度为 15 个字符,包含根据协议类型,网桥自动添加上的名字前缀(br-、"
1939 msgid "Maximum number of leased addresses."
1948 msgid "Memory usage (%)"
1957 msgid "Mirror monitor port"
1960 msgid "Mirror source port"
1963 msgid "Missing protocol extension for proto %q"
1964 msgstr "缺少协议 %q 的协议扩展"
1966 msgid "Mobility Domain"
1975 msgid "Modem device"
1978 msgid "Modem init timeout"
1990 msgid "Mount Points"
1993 msgid "Mount Points - Mount Entry"
1996 msgid "Mount Points - Swap Entry"
2000 "Mount Points define at which point a memory device will be attached to the "
2002 msgstr "配置存储设备挂载到文件系统中的位置和参数"
2004 msgid "Mount filesystems not specifically configured"
2005 msgstr "自动挂载未专门配置挂载点的分区"
2007 msgid "Mount options"
2013 msgid "Mount swap not specifically configured"
2014 msgstr "自动挂载未专门配置的 swap 分区"
2016 msgid "Mounted file systems"
2025 msgid "Multicast address"
2034 msgid "NAT64 Prefix"
2046 msgid "NTP server candidates"
2052 msgid "Name of the new interface"
2055 msgid "Name of the new network"
2067 msgid "Network Utilities"
2070 msgid "Network boot image"
2073 msgid "Network without interfaces."
2079 msgid "No DHCP Server configured for this interface"
2080 msgstr "本接口未配置 DHCP 服务器"
2085 msgid "No chains in this table"
2088 msgid "No files found"
2091 msgid "No information available"
2094 msgid "No negative cache"
2097 msgid "No network configured on this device"
2100 msgid "No network name specified"
2103 msgid "No package lists available"
2106 msgid "No password set!"
2109 msgid "No rules in this chain"
2112 msgid "No zone assigned"
2118 msgid "Noise Margin (SNR)"
2124 msgid "Non Pre-emtive CRC errors (CRC_P)"
2125 msgstr "非抢占 CRC 错误(CRC_P)"
2127 msgid "Non-wildcard"
2139 msgid "Not associated"
2142 msgid "Not connected"
2145 msgid "Note: Configuration files will be erased."
2146 msgstr "注意:配置文件将被删除。"
2148 msgid "Note: interface name length"
2157 msgid "Number of cached DNS entries (max is 10000, 0 is no caching)"
2158 msgstr "缓存的 DNS 条目数量(最大 10000,0 表示不缓存)"
2163 msgid "OPKG-Configuration"
2166 msgid "Obfuscated Group Password"
2169 msgid "Obfuscated Password"
2172 msgid "Obtain IPv6-Address"
2175 msgid "Off-State Delay"
2179 "On this page you can configure the network interfaces. You can bridge "
2180 "several interfaces by ticking the \"bridge interfaces\" field and enter the "
2181 "names of several network interfaces separated by spaces. You can also use "
2182 "<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
2183 "<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
2184 "<samp>eth0.1</samp>)."
2186 "在此页面,您可以配置网络接口。您可以勾选“桥接接口”,并输入由空格分隔的多个网"
2187 "络接口的名称来桥接多个接口。接口名称中可以使用 <abbr title=\"Virtual Local "
2188 "Area Network\">VLAN</abbr> 记号 <samp>INTERFACE.VLANNR</samp>(例如:"
2189 "<samp>eth0.1</samp>)。"
2191 msgid "On-State Delay"
2194 msgid "One of hostname or mac address must be specified!"
2195 msgstr "请指定主机名或MAC地址!"
2197 msgid "One or more fields contain invalid values!"
2198 msgstr "一个或多个选项值有误!"
2200 msgid "One or more invalid/required values on tab"
2201 msgstr "选项卡上存在一个或多个无效/必需值"
2203 msgid "One or more required fields have no value!"
2204 msgstr "一个或多个必选项值为空!"
2206 msgid "Open list..."
2209 msgid "OpenConnect (CISCO AnyConnect)"
2210 msgstr "OpenConnect (CISCO AnyConnect)"
2212 msgid "Operating frequency"
2215 msgid "Option changed"
2218 msgid "Option removed"
2225 "Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
2226 "starting with <code>0x</code>."
2228 "可选,传出加密数据包的 32 位标记。请输入十六进制值,以 <code>0x</code> 开头。"
2231 "Optional. Allowed values: 'eui64', 'random', fixed value like '::1' or "
2232 "'::1:2'. When IPv6 prefix (like 'a:b:c:d::') is received from a delegating "
2233 "server, use the suffix (like '::1') to form the IPv6 address ('a:b:c:d::1') "
2234 "for the interface."
2236 "可选,允许的值:'eui64'、'random' 和其他固定值(例如:'::1' 或 '::1:2')。当"
2237 "从授权服务器获取到 IPv6 前缀(如 'a:b:c:d::'),使用后缀(如 '::1')合成 "
2238 "IPv6 地址('a:b:c:d::1')分配给此接口。"
2241 "Optional. Base64-encoded preshared key. Adds in an additional layer of "
2242 "symmetric-key cryptography for post-quantum resistance."
2243 msgstr "可选,Base64 编码的预共享密钥。"
2245 msgid "Optional. Create routes for Allowed IPs for this peer."
2246 msgstr "可选,为此 Peer 创建允许 IP 的路由。"
2249 "Optional. Host of peer. Names are resolved prior to bringing up the "
2251 msgstr "可选,Peer 的主机。"
2253 msgid "Optional. Maximum Transmission Unit of tunnel interface."
2254 msgstr "可选,隧道接口的最大传输单元。"
2256 msgid "Optional. Port of peer."
2257 msgstr "可选,Peer 的端口。"
2260 "Optional. Seconds between keep alive messages. Default is 0 (disabled). "
2261 "Recommended value if this device is behind a NAT is 25."
2263 "可选,Keep-Alive 消息之间的秒数,默认为 0(禁用)。如果此设备位于 NAT 之后,"
2266 msgid "Optional. UDP port used for outgoing and incoming packets."
2267 msgstr "可选,用于传出和传入数据包的 UDP 端口。"
2281 msgid "Output Interface"
2284 msgid "Override MAC address"
2287 msgid "Override MTU"
2290 msgid "Override TOS"
2293 msgid "Override TTL"
2296 msgid "Override default interface name"
2299 msgid "Override the gateway in DHCP responses"
2300 msgstr "重设 DHCP 响应网关"
2303 "Override the netmask sent to clients. Normally it is calculated from the "
2304 "subnet that is served."
2305 msgstr "重设发送到客户端的子网掩码。"
2307 msgid "Override the table used for internal routes"
2316 msgid "PAP/CHAP password"
2317 msgstr "PAP/CHAP 密码"
2319 msgid "PAP/CHAP username"
2320 msgstr "PAP/CHAP 用户名"
2334 msgid "PPPoA Encapsulation"
2352 msgid "PSID-bits length"
2353 msgstr "PSID-bits 长度"
2355 msgid "PTM/EFM (Packet Transfer Mode)"
2356 msgstr "PTM/EFM(分组传输模式)"
2358 msgid "Package libiwinfo required!"
2359 msgstr "需要 libiwinfo 软件包!"
2361 msgid "Package lists are older than 24 hours"
2362 msgstr "软件包列表已超过 24 小时未更新"
2364 msgid "Package name"
2370 msgid "Part of zone %q"
2376 msgid "Password authentication"
2379 msgid "Password of Private Key"
2382 msgid "Password of inner Private Key"
2385 msgid "Password successfully changed!"
2391 msgid "Path to CA-Certificate"
2394 msgid "Path to Client-Certificate"
2397 msgid "Path to Private Key"
2400 msgid "Path to inner CA-Certificate"
2401 msgstr "内部 CA 证书的路径"
2403 msgid "Path to inner Client-Certificate"
2406 msgid "Path to inner Private Key"
2412 msgid "Peer IP address to assign"
2413 msgstr "要分配的 Peer IP 地址"
2418 msgid "Perfect Forward Secrecy"
2421 msgid "Perform reboot"
2424 msgid "Perform reset"
2427 msgid "Persistent Keep Alive"
2428 msgstr "持续 Keep-Alive"
2433 msgid "Physical Settings"
2442 msgid "Please enter your username and password."
2451 msgid "Port status:"
2454 msgid "Power Management Mode"
2457 msgid "Pre-emtive CRC errors (CRCP_P)"
2458 msgstr "抢占式 CRC 错误(CRCP_P)"
2466 msgid "Prefix Delegated"
2469 msgid "Preshared Key"
2473 "Presume peer to be dead after given amount of LCP echo failures, use 0 to "
2475 msgstr "在指定数量的 LCP 响应故障后假定链路已断开,0 为忽略故障"
2477 msgid "Prevent listening on these interfaces."
2480 msgid "Prevents client-to-client communication"
2483 msgid "Prism2/2.5/3 802.11b Wireless Controller"
2484 msgstr "Prism2/2.5/3 802.11b 无线控制器"
2504 msgid "Protocol family"
2507 msgid "Protocol of the new interface"
2510 msgid "Protocol support is not installed"
2513 msgid "Provide NTP server"
2514 msgstr "作为 NTP 服务器提供服务"
2516 msgid "Provide new network"
2519 msgid "Pseudo Ad-Hoc (ahdemo)"
2520 msgstr "伪装 Ad-Hoc(ahdemo)"
2525 msgid "Public prefix routed to this device for distribution to clients."
2526 msgstr "分配到此设备的公共前缀,用以分发到客户端。"
2528 msgid "QMI Cellular"
2534 msgid "R0 Key Lifetime"
2537 msgid "R1 Key Holder"
2540 msgid "RFC3947 NAT-T mode"
2541 msgstr "RFC3947 NAT-T 模式"
2543 msgid "RTS/CTS Threshold"
2552 msgid "RaLink 802.11%s Wireless Controller"
2553 msgstr "RaLink 802.11%s 无线控制器"
2555 msgid "Radius-Accounting-Port"
2556 msgstr "Radius 计费端口"
2558 msgid "Radius-Accounting-Secret"
2559 msgstr "Radius 计费密钥"
2561 msgid "Radius-Accounting-Server"
2562 msgstr "Radius 计费服务器"
2564 msgid "Radius-Authentication-Port"
2565 msgstr "Radius 认证端口"
2567 msgid "Radius-Authentication-Secret"
2568 msgstr "Radius 认证密钥"
2570 msgid "Radius-Authentication-Server"
2571 msgstr "Radius 认证服务器"
2574 "Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
2575 "Configuration Protocol\">DHCP</abbr>-Server"
2577 "根据 <code>/etc/ethers</code> 来配置 <abbr title=\"Dynamic Host "
2578 "Configuration Protocol\">DHCP</abbr> 服务器"
2581 "Really delete this interface? The deletion cannot be undone! You might lose "
2582 "access to this device if you are connected via this interface"
2586 "Really delete this wireless network? The deletion cannot be undone! You "
2587 "might lose access to this device if you are connected via this network."
2589 "确定要删除此无线网络?删除操作无法撤销!\\n删除此无线网络,可能导致无法再访问"
2592 msgid "Really reset all changes?"
2596 "Really shut down network? You might lose access to this device if you are "
2597 "connected via this interface"
2601 "Really shutdown interface \"%s\"? You might lose access to this device if "
2602 "you are connected via this interface."
2604 "确定要关闭接口 \"%s\"?\\n如果您正在使用此接口连接路由器,关闭此网络可能导致"
2607 msgid "Really switch protocol?"
2610 msgid "Realtime Connections"
2613 msgid "Realtime Graphs"
2616 msgid "Realtime Load"
2619 msgid "Realtime Traffic"
2622 msgid "Realtime Wireless"
2625 msgid "Reassociation Deadline"
2628 msgid "Rebind protection"
2634 msgid "Rebooting..."
2637 msgid "Reboots the operating system of your device"
2643 msgid "Receiver Antenna"
2646 msgid "Recommended. IP addresses of the WireGuard interface."
2647 msgstr "推荐,Wire Guard 接口的 IP 地址。"
2649 msgid "Reconnect this interface"
2652 msgid "Reconnecting interface"
2661 msgid "Relay Bridge"
2664 msgid "Relay between networks"
2667 msgid "Relay bridge"
2670 msgid "Remote IPv4 address"
2673 msgid "Remote IPv4 address or FQDN"
2674 msgstr "远程 IPv4 地址或 FQDN"
2682 msgid "Replace entry"
2685 msgid "Replace wireless configuration"
2688 msgid "Request IPv6-address"
2691 msgid "Request IPv6-prefix of length"
2692 msgstr "请求指定长度的 IPv6 前缀"
2697 msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
2698 msgstr "某些 ISP 需要,例如:同轴线网络 DOCSIS 3"
2700 msgid "Required. Base64-encoded private key for this interface."
2701 msgstr "必须,此接口的 Base64 编码私钥。"
2703 msgid "Required. Base64-encoded public key of peer."
2704 msgstr "必须,Peer 的 Base64 编码公钥。"
2707 "Required. IP addresses and prefixes that this peer is allowed to use inside "
2708 "the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
2709 "routes through the tunnel."
2711 "必须,允许该 Peer 在隧道中使用的 IP 地址和前缀,通常是该 Peer 的隧道 IP 地址"
2715 "Requires the 'full' version of wpad/hostapd and support from the wifi driver "
2716 "<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
2718 "需要完整版本的 wpad/hostapd,并且 WiFi 驱动支持<br />(截止 2017.02,已知支持"
2719 "此特性的驱动有 ath9k、ath10k,以及 LEDE 中的 mwlwifi 和 mt76)"
2722 "Requires upstream supports DNSSEC; verify unsigned domain responses really "
2723 "come from unsigned domains"
2724 msgstr "需要上级支持 DNSSEC,验证未签名的响应确实是来自未签名的域名"
2729 msgid "Reset Counters"
2732 msgid "Reset to defaults"
2735 msgid "Resolv and Hosts Files"
2736 msgstr "HOSTS 和解析文件"
2738 msgid "Resolve file"
2744 msgid "Restart Firewall"
2747 msgid "Restore backup"
2750 msgid "Reveal/hide password"
2756 msgid "Revert changes"
2759 msgid "Revert request failed with status <code>%h</code>"
2760 msgstr "恢复请求失败,状态 <code>%h</code>"
2762 msgid "Reverting configuration…"
2768 msgid "Root directory for files served via TFTP"
2769 msgstr "TFTP 服务器的根目录"
2771 msgid "Root preparation"
2774 msgid "Route Allowed IPs"
2780 msgid "Router Advertisement-Service"
2783 msgid "Router Password"
2790 "Routes specify over which interface and gateway a certain host or network "
2792 msgstr "路由表描述了数据包的可达路径。"
2794 msgid "Run a filesystem check before mounting the device"
2795 msgstr "挂载设备前运行文件系统检查"
2797 msgid "Run filesystem check"
2809 msgid "SSH server address"
2812 msgid "SSH server port"
2815 msgid "SSH username"
2827 msgid "Save & Apply"
2833 msgid "Scheduled Tasks"
2836 msgid "Section added"
2839 msgid "Section removed"
2842 msgid "See \"mount\" manpage for details"
2843 msgstr "详参 \"mount\" 联机帮助"
2846 "Send LCP echo requests at the given interval in seconds, only effective in "
2847 "conjunction with failure threshold"
2848 msgstr "定时发送 LCP 响应(秒),仅在结合了故障阈值时有效"
2850 msgid "Separate Clients"
2853 msgid "Server Settings"
2856 msgid "Service Name"
2859 msgid "Service Type"
2866 "Set interface properties regardless of the link carrier (If set, carrier "
2867 "sense events do not invoke hotplug handlers)."
2869 "不管接口的链路状态如何,总是用应用设置(如果勾选,链路状态变更将不再触发 "
2872 msgid "Set up Time Synchronization"
2875 msgid "Setup DHCP Server"
2876 msgstr "配置 DHCP 服务器"
2878 msgid "Severely Errored Seconds (SES)"
2884 msgid "Show current backup file list"
2887 msgid "Shutdown this interface"
2890 msgid "Shutdown this network"
2896 msgid "Signal Attenuation (SATN)"
2908 msgid "Size of DNS query cache"
2909 msgstr "DNS 查询缓存的大小"
2914 msgid "Skip to content"
2917 msgid "Skip to navigation"
2926 msgid "Software VLAN"
2929 msgid "Some fields are invalid, cannot save values!"
2930 msgstr "一些项目的值无效,无法保存!"
2932 msgid "Sorry, the object you requested was not found."
2933 msgstr "对不起,请求的目标未找到。"
2935 msgid "Sorry, the server encountered an unexpected error."
2936 msgstr "对不起,服务器遇到未知错误。"
2939 "Sorry, there is no sysupgrade support present; a new firmware image must be "
2940 "flashed manually. Please refer to the wiki for device specific install "
2943 "抱歉,您的设备暂不支持 sysupgrade 升级,需手动更新固件。请参考 Wiki 中关于此"
2949 msgid "Specifies the directory the device is attached to"
2952 msgid "Specifies the listening port of this <em>Dropbear</em> instance"
2953 msgstr "指定此 <em>Dropbear</em> 实例的监听端口"
2956 "Specifies the maximum amount of failed ARP requests until hosts are presumed "
2958 msgstr "判定主机已下线的最少 ARP 请求失败数"
2961 "Specifies the maximum amount of seconds after which hosts are presumed to be "
2963 msgstr "判断主机已下线的超时时间(秒)"
2965 msgid "Specify a TOS (Type of Service)."
2966 msgstr "指定 TOS(服务类型)。"
2969 "Specify a TTL (Time to Live) for the encapsulating packet other than the "
2971 msgstr "为封装数据包设置 TTL(生存时间),缺省值:64"
2974 "Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
2976 msgstr "设置 MTU(最大传输单位),缺省值:1280 bytes"
2978 msgid "Specify the secret encryption key here."
2984 msgid "Start priority"
2987 msgid "Starting configuration apply…"
2993 msgid "Static IPv4 Routes"
2996 msgid "Static IPv6 Routes"
2999 msgid "Static Leases"
3002 msgid "Static Routes"
3005 msgid "Static address"
3009 "Static leases are used to assign fixed IP addresses and symbolic hostnames "
3010 "to DHCP clients. They are also required for non-dynamic interface "
3011 "configurations where only hosts with a corresponding lease are served."
3013 "静态租约用于给 DHCP 客户端分配固定的 IP 地址和主机标识。只有指定的主机才能连"
3022 msgid "Strict order"
3028 msgid "Suppress logging"
3031 msgid "Suppress logging of the routine operation of these protocols"
3032 msgstr "不记录这些协议的常规操作日志。"
3046 msgid "Switch %q (%s)"
3050 "Switch %q has an unknown topology - the VLAN settings might not be accurate."
3051 msgstr "交换机 %q 具有未知的拓扑结构,VLAN 设置可能不正确。"
3053 msgid "Switch Port Mask"
3059 msgid "Switch protocol"
3062 msgid "Sync with browser"
3065 msgid "Synchronizing..."
3074 msgid "System Properties"
3077 msgid "System log buffer size"
3083 msgid "TFTP Settings"
3086 msgid "TFTP server root"
3087 msgstr "TFTP 服务器根目录"
3101 msgid "Target network"
3108 "The <em>Device Configuration</em> section covers physical settings of the "
3109 "radio hardware such as channel, transmit power or antenna selection which "
3110 "are shared among all defined wireless networks (if the radio hardware is "
3111 "multi-SSID capable). Per network settings like encryption or operation mode "
3112 "are grouped in the <em>Interface Configuration</em>."
3114 "“设备配置”区域可配置无线的硬件参数,比如:信道、发射功率或发射天线,如果此无"
3115 "线硬件支持多 SSID,则全部 SSID 共用此设备配置。“接口配置”区域则可配置接口各自"
3119 "The <em>libiwinfo-lua</em> package is not installed. You must install this "
3120 "component for working wireless configuration!"
3121 msgstr "软件包 <em>libiwinfo-lua</em> 未安装,必须安装此组件以配置无线!"
3124 "The HE.net endpoint update configuration changed, you must now use the plain "
3125 "username instead of the user ID!"
3126 msgstr "HE.net 客户端更新设置已经被改变,您现在必须使用用户名代替用户 ID!"
3129 "The IPv4 address or the fully-qualified domain name of the remote tunnel end."
3130 msgstr "远程隧道端的 IPv4 地址或完整域名。"
3133 "The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
3134 msgstr "运营商特定的 IPv6 前缀,通常以 <code>::</code> 为结尾"
3137 "The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
3138 "code> and <code>_</code>"
3140 "合法字符:<code>A-Z</code>, <code>a-z</code>, <code>0-9</code> 和 <code>_</"
3143 msgid "The configuration file could not be loaded due to the following error:"
3144 msgstr "由于以下错误,配置文件无法被加载:"
3147 "The device could not be reached within %d seconds after applying the pending "
3148 "changes, which caused the configuration to be rolled back for safety "
3149 "reasons. If you believe that the configuration changes are correct "
3150 "nonetheless, perform an unchecked configuration apply. Alternatively, you "
3151 "can dismiss this warning and edit changes before attempting to apply again, "
3152 "or revert all pending changes to keep the currently working configuration "
3155 "在应用挂起的更改后 %d 秒内无法到达该设备,出于安全原因导致配置回滚。如果您认"
3156 "为配置更改仍然正确,请执行未选中的配置应用。或者您可以在尝试再次应用之前解除"
3157 "此警告并编辑更改,或者还原所有未完成的更改以保持当前正在工作的配置状态。"
3160 "The device file of the memory or partition (<abbr title=\"for example\">e.g."
3161 "</abbr> <code>/dev/sda1</code>)"
3162 msgstr "存储器或分区的设备文件,(例如:<code>/dev/sda1</code>)"
3165 "The filesystem that was used to format the memory (<abbr title=\"for example"
3166 "\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
3169 "用于格式化存储器的文件系统(例如:<samp><abbr title=\"Third Extended "
3170 "Filesystem\">ext3</abbr></samp>)"
3173 "The flash image was uploaded. Below is the checksum and file size listed, "
3174 "compare them with the original file to ensure data integrity.<br /> Click "
3175 "\"Proceed\" below to start the flash procedure."
3177 "固件已上传,请注意核对文件大小和校验值!<br />点击下面的“继续”开始刷写,刷新"
3180 msgid "The following changes have been reverted"
3183 msgid "The following rules are currently active on this system."
3184 msgstr "以下规则当前在系统中处于活动状态。"
3186 msgid "The given network name is not unique"
3190 "The hardware is not multi-SSID capable and the existing configuration will "
3191 "be replaced if you proceed."
3192 msgstr "本机的硬件不支持多 SSID,如果继续,现有配置将被替换。"
3195 "The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
3197 msgstr "IPv4 前缀长度(bit),其余的用在 IPv6 地址。"
3199 msgid "The length of the IPv6 prefix in bits"
3200 msgstr "IPv6 前缀长度(bit)"
3202 msgid "The local IPv4 address over which the tunnel is created (optional)."
3203 msgstr "所创建隧道的本地 IPv4 地址(可选)。"
3206 "The network ports on this device can be combined to several <abbr title="
3207 "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
3208 "communicate directly with each other. <abbr title=\"Virtual Local Area "
3209 "Network\">VLAN</abbr>s are often used to separate different network "
3210 "segments. Often there is by default one Uplink port for a connection to the "
3211 "next greater network like the internet and other ports for a local network."
3213 "本设备可以划分为多个 <abbr title=\"Virtual Local Area Network\">VLAN</abbr>,"
3214 "并支持电脑间的直接通讯。<abbr title=\"Virtual Local Area Network\">VLAN</"
3215 "abbr> 也常用于分割不同网段。默认通常是一条上行端口连接 ISP,其余端口为本地子"
3218 msgid "The selected protocol needs a device assigned"
3219 msgstr "所选的协议需要分配设备"
3221 msgid "The submitted security token is invalid or already expired!"
3222 msgstr "提交的安全令牌无效或已过期!"
3225 "The system is erasing the configuration partition now and will reboot itself "
3227 msgstr "系统正在擦除配置分区,完成后会自动重启。"
3230 "The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
3231 "few minutes before you try to reconnect. It might be necessary to renew the "
3232 "address of your computer to reach the device again, depending on your "
3235 "正在刷新系统...<br />切勿关闭电源! DO NOT POWER OFF THE DEVICE!<br />等待数分"
3236 "钟后即可尝试重新连接到路由。您可能需要更改计算机的 IP 地址以重新连接。"
3239 "The uploaded image file does not contain a supported format. Make sure that "
3240 "you choose the generic image format for your platform."
3241 msgstr "不支持所上传的映像文件格式,请选择适合当前平台的通用映像文件。"
3243 msgid "There are no active leases."
3246 msgid "There are no changes to apply."
3249 msgid "There are no pending changes to revert!"
3252 msgid "There are no pending changes!"
3256 "There is no device assigned yet, please attach a network device in the "
3257 "\"Physical Settings\" tab"
3258 msgstr "尚未分配设备,请在“物理设置”选项卡中选择网络设备"
3261 "There is no password set on this router. Please configure a root password to "
3262 "protect the web interface and enable SSH."
3263 msgstr "尚未设置密码。请为 root 用户设置密码以保护主机并启用 SSH。"
3265 msgid "This IPv4 address of the relay"
3266 msgstr "中继的 IPv4 地址"
3269 "This file may contain lines like 'server=/domain/1.2.3.4' or "
3270 "'server=1.2.3.4' fordomain-specific or full upstream <abbr title=\"Domain "
3271 "Name System\">DNS</abbr> servers."
3273 "此文件包含类似于 'server=/domain/1.2.3.4' 或 'server=1.2.3.4' 的行,用于解析"
3274 "特定域名或指定上游 <abbr title=\"Domain Name System\">DNS</abbr> 服务器。"
3277 "This is a list of shell glob patterns for matching files and directories to "
3278 "include during sysupgrade. Modified files in /etc/config/ and certain other "
3279 "configurations are automatically preserved."
3281 "系统升级时要保存的配置文件和目录的清单。目录 /etc/config/ 内修改过的文件以及"
3285 "This is either the \"Update Key\" configured for the tunnel or the account "
3286 "password if no update key has been configured"
3287 msgstr "如果更新密钥没有设置的话,隧道的“更新密钥”或者账户密码必须填写。"
3290 "This is the content of /etc/rc.local. Insert your own commands here (in "
3291 "front of 'exit 0') to execute them at the end of the boot process."
3292 msgstr "启动脚本插入到 'exit 0' 之前即可随系统启动运行。"
3295 "This is the local endpoint address assigned by the tunnel broker, it usually "
3296 "ends with <code>...:2/64</code>"
3297 msgstr "隧道代理分配的本地终端地址,通常以 <code>...:2/64</code> 结尾"
3300 "This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
3301 "abbr> in the local network"
3303 "这是本地网络中唯一的 <abbr title=\"Dynamic Host Configuration Protocol"
3304 "\">DHCP</abbr> 服务器"
3306 msgid "This is the plain username for logging into the account"
3307 msgstr "登录账户时填写的用户名"
3310 "This is the prefix routed to you by the tunnel broker for use by clients"
3311 msgstr "这是隧道代理分配给您的路由前缀,供客户端使用"
3313 msgid "This is the system crontab in which scheduled tasks can be defined."
3314 msgstr "自定义系统 crontab 中的计划任务。"
3317 "This is usually the address of the nearest PoP operated by the tunnel broker"
3318 msgstr "这通常是隧道代理所管理的最近的 PoP 的地址"
3321 "This list gives an overview over currently running system processes and "
3323 msgstr "系统中正在运行的进程概况和它们的状态信息。"
3325 msgid "This page gives an overview over currently active network connections."
3328 msgid "This section contains no values yet"
3331 msgid "Time Synchronization"
3334 msgid "Time Synchronization is not configured yet."
3341 "To restore configuration files, you can upload a previously generated backup "
3343 msgstr "上传备份存档以恢复配置。"
3348 msgid "Total Available"
3360 msgid "Transmission Rate"
3366 msgid "Transmit Power"
3369 msgid "Transmitter Antenna"
3375 msgid "Trigger Mode"
3381 msgid "Tunnel Interface"
3397 msgstr "仅 UMTS(WCDMA)"
3399 msgid "UMTS/GPRS/EV-DO"
3400 msgstr "UMTS/GPRS/EV-DO"
3411 msgid "Unable to dispatch"
3414 msgid "Unavailable Seconds (UAS)"
3420 msgid "Unknown Error, password not changed!"
3421 msgstr "未知错误,密码未更改!"
3429 msgid "Unsaved Changes"
3432 msgid "Unsupported protocol type."
3438 msgid "Update lists"
3442 "Upload a sysupgrade-compatible image here to replace the running firmware. "
3443 "Check \"Keep settings\" to retain the current configuration (requires a "
3444 "compatible firmware image)."
3446 "上传一个 sysupgrade 格式的固件映像文件以替换当前运行的固件。勾选“保留配置”以"
3447 "使更新后的系统仍然使用当前的系统配置(新的固件需要和当前固件兼容)。"
3449 msgid "Upload archive..."
3452 msgid "Uploaded File"
3458 msgid "Use <code>/etc/ethers</code>"
3459 msgstr "使用 <code>/etc/ethers</code> 配置"
3461 msgid "Use DHCP gateway"
3464 msgid "Use DNS servers advertised by peer"
3465 msgstr "使用对端通告的 DNS 服务器"
3467 msgid "Use ISO/IEC 3166 alpha2 country codes."
3468 msgstr "参考 ISO/IEC 3166 alpha2 国家代码。"
3470 msgid "Use MTU on tunnel interface"
3473 msgid "Use TTL on tunnel interface"
3476 msgid "Use as external overlay (/overlay)"
3477 msgstr "作为外部 overlay 使用(/overlay)"
3479 msgid "Use as root filesystem (/)"
3480 msgstr "作为根文件系统使用(/)"
3482 msgid "Use broadcast flag"
3485 msgid "Use builtin IPv6-management"
3486 msgstr "使用内置的 IPv6 管理"
3488 msgid "Use custom DNS servers"
3489 msgstr "使用自定义的 DNS 服务器"
3491 msgid "Use default gateway"
3494 msgid "Use gateway metric"
3497 msgid "Use routing table"
3501 "Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
3502 "em> identifies the host, the <em>IPv4-Address</em> specifies the fixed "
3503 "address to use, and the <em>Hostname</em> is assigned as a symbolic name to "
3504 "the requesting host. The optional <em>Lease time</em> can be used to set non-"
3505 "standard host-specific lease time, e.g. 12h, 3d or infinite."
3507 "使用“添加”按钮来增加新的租约条目。“IPv4 地址”和“主机名”字段的值将被固定分配"
3508 "给“MAC 地址”字段标识的主机,“租期”是一个可选字段,可为每个主机单独设定 DHCP "
3509 "租期的时长,例如:12h、3d、inifinite,分别表示 12 小时、3 天、永久。"
3514 msgid "Used Key Slot"
3518 "Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
3519 "needed with normal WPA(2)-PSK."
3521 "用于两种不同的用途:RADIUS NAS ID 和 802.11r R0KH-ID,普通 WPA(2)-PSK 不需"
3524 msgid "User certificate (PEM encoded)"
3527 msgid "User key (PEM encoded)"
3542 msgid "VLANs on %q (%s)"
3543 msgstr "%q(%s)上的 VLAN"
3545 msgid "VPN Local address"
3548 msgid "VPN Local port"
3554 msgid "VPN Server port"
3557 msgid "VPN Server's certificate SHA1 hash"
3558 msgstr "VPN 服务器证书的 SHA1 哈希值"
3560 msgid "VPNC (CISCO 3000 (and others) VPN)"
3561 msgstr "VPNC(CISCO 3000 和其他 VPN)"
3566 msgid "Vendor Class to send when requesting DHCP"
3567 msgstr "请求 DHCP 时发送的 Vendor Class 选项"
3578 msgid "WEP Open System"
3581 msgid "WEP Shared Key"
3584 msgid "WEP passphrase"
3590 msgid "WPA passphrase"
3594 "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
3595 "and ad-hoc mode) to be installed."
3597 "WPA 加密需要安装 wpa_supplicant(客户端模式)或安装 hostapd(接入点 AP、点对"
3600 msgid "Waiting for changes to be applied..."
3603 msgid "Waiting for command to complete..."
3604 msgstr "等待命令执行完成..."
3606 msgid "Waiting for configuration to get applied… %ds"
3607 msgstr "等待应用配置... %d 秒"
3609 msgid "Waiting for device..."
3615 msgid "Warning: There are unsaved changes that will get lost on reboot!"
3616 msgstr "警告:一些未保存的配置将在重启后丢失!"
3619 "When using a PSK, the PMK can be generated locally without inter AP "
3621 msgstr "当使用 PSK 时,PMK 可以在没有 AP 间通信的情况下在本地生成"
3626 msgid "WireGuard VPN"
3627 msgstr "WireGuard VPN"
3632 msgid "Wireless Adapter"
3635 msgid "Wireless Network"
3638 msgid "Wireless Overview"
3641 msgid "Wireless Security"
3644 msgid "Wireless is disabled or not associated"
3647 msgid "Wireless is restarting..."
3650 msgid "Wireless network is disabled"
3653 msgid "Wireless network is enabled"
3656 msgid "Wireless restarted"
3659 msgid "Wireless shut down"
3662 msgid "Write received DNS requests to syslog"
3663 msgstr "将收到的 DNS 请求写入系统日志"
3665 msgid "Write system log to file"
3669 "You can enable or disable installed init scripts here. Changes will applied "
3670 "after a device reboot.<br /><strong>Warning: If you disable essential init "
3671 "scripts like \"network\", your device might become inaccessible!</strong>"
3673 "在此启用或禁用已安装的启动脚本,更改在设备重启后生效。<br /><strong>警告:如"
3674 "果禁用了必要的启动脚本,比如 \"network\",可能会导致无法访问设备!</strong>"
3677 "You must enable JavaScript in your browser or LuCI will not work properly."
3678 msgstr "必须开启浏览器的 JavaScript 支持,否则 LuCI 无法正常工作。"
3681 "Your Internet Explorer is too old to display this page correctly. Please "
3682 "upgrade it to at least version 7 or use another browser like Firefox, Opera "
3685 "您的 IE 浏览器太老了,无法正常显示这个页面!请更新到 IE7 及以上或使用其他浏览"
3686 "器,例如:Chrome、Firefox、Opera、Safari。"
3706 msgid "creates a bridge over specified interface(s)"
3725 "file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
3726 "abbr>-leases will be stored"
3728 "用于存放已分配的 <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
3746 msgid "if target is a network"
3761 msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
3762 msgstr "本地 <abbr title=\"Domain Name Syste\">DNS</abbr> 解析文件"
3806 msgid "stateful-only"
3812 msgid "stateless + stateful"
3813 msgstr "无状态的 + 有状态的"
3818 msgid "time units (TUs / 1.024 ms) [1000-65535]"
3819 msgstr "时间单位(TUs / 1.024ms)[1000-65535]"
3830 msgid "unspecified -or- create:"
3842 #~ msgid "DHCP Leases"
3845 #~ msgid "DHCPv6 Leases"
3846 #~ msgstr "DHCPv6 分配"
3849 #~ "Really delete this interface? The deletion cannot be undone! You might "
3850 #~ "lose access to this device if you are connected via this interface."
3852 #~ "确定要删除此接口?删除操作无法撤销!\\n删除此接口,可能导致无法再访问路由"
3856 #~ "Really shut down network? You might lose access to this device if you are "
3857 #~ "connected via this interface."
3859 #~ "确定要关闭此网络?\\n如果您正在使用此接口连接路由器,关闭此网络可能导致连"
3868 #~ msgid "IPv4 WAN Status"
3869 #~ msgstr "IPv4 WAN 状态"
3871 #~ msgid "IPv6 WAN Status"
3872 #~ msgstr "IPv6 WAN 状态"