1 /* vi: set sw=4 ts=4: */
3 * Termios command line History and Editing.
5 * Copyright (c) 1986-2003 may safely be consumed by a BSD or GPL license.
6 * Written by: Vladimir Oleynik <dzo@simtreas.ru>
9 * Adam Rogoyski <rogoyski@cs.utexas.edu>
10 * Dave Cinege <dcinege@psychosis.com>
11 * Jakub Jelinek (c) 1995
12 * Erik Andersen <andersen@codepoet.org> (Majorly adjusted for busybox)
14 * This code is 'as is' with no warranty.
18 * Usage and known bugs:
19 * Terminal key codes are not extensive, more needs to be added.
20 * This version was created on Debian GNU/Linux 2.x.
21 * Delete, Backspace, Home, End, and the arrow keys were tested
22 * to work in an Xterm and console. Ctrl-A also works as Home.
23 * Ctrl-E also works as End.
25 * The following readline-like commands are not implemented:
26 * ESC-b -- Move back one word
27 * ESC-f -- Move forward one word
28 * ESC-d -- Delete forward one word
29 * CTL-t -- Transpose two characters
31 * lineedit does not know that the terminal escape sequences do not
32 * take up space on the screen. The redisplay code assumes, unless
33 * told otherwise, that each character in the prompt is a printable
34 * character that takes up one character position on the screen.
35 * You need to tell lineedit that some sequences of characters
36 * in the prompt take up no screen space. Compatibly with readline,
37 * use the \[ escape to begin a sequence of non-printing characters,
38 * and the \] escape to signal the end of such a sequence. Example:
40 * PS1='\[\033[01;32m\]\u@\h\[\033[01;34m\] \w \$\[\033[00m\] '
45 /* FIXME: obsolete CONFIG item? */
46 #define ENABLE_FEATURE_NONPRINTABLE_INVERSE_PUT 0
49 # define ENABLE_FEATURE_EDITING 0
50 # define ENABLE_FEATURE_TAB_COMPLETION 0
51 # define ENABLE_FEATURE_USERNAME_COMPLETION 0
52 # define ENABLE_FEATURE_NONPRINTABLE_INVERSE_PUT 0
56 /* Entire file (except TESTing part) sits inside this #if */
57 #if ENABLE_FEATURE_EDITING
60 #define ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR \
61 (ENABLE_FEATURE_USERNAME_COMPLETION || ENABLE_FEATURE_EDITING_FANCY_PROMPT)
62 #define IF_FEATURE_GETUSERNAME_AND_HOMEDIR(...)
63 #if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
64 #undef IF_FEATURE_GETUSERNAME_AND_HOMEDIR
65 #define IF_FEATURE_GETUSERNAME_AND_HOMEDIR(...) __VA_ARGS__
69 #define SEQ_CLEAR_TILL_END_OF_SCREEN "\033[J"
70 //#define SEQ_CLEAR_TILL_END_OF_LINE "\033[K"
74 #if ENABLE_UNICODE_SUPPORT
75 # define BB_NUL ((wchar_t)0)
76 # define CHAR_T wchar_t
77 static bool BB_isspace(CHAR_T c) { return ((unsigned)c < 256 && isspace(c)); }
78 # if ENABLE_FEATURE_EDITING_VI
79 static bool BB_isalnum(CHAR_T c) { return ((unsigned)c < 256 && isalnum(c)); }
81 static bool BB_ispunct(CHAR_T c) { return ((unsigned)c < 256 && ispunct(c)); }
86 # define isspace isspace_must_not_be_used
87 # define isalnum isalnum_must_not_be_used
88 # define ispunct ispunct_must_not_be_used
89 # define isprint isprint_must_not_be_used
93 # define BB_isspace(c) isspace(c)
94 # define BB_isalnum(c) isalnum(c)
95 # define BB_ispunct(c) ispunct(c)
99 # if ENABLE_UNICODE_PRESERVE_BROKEN
100 # define unicode_mark_inv_wchar(wc) ((wc) | 0x20000000)
101 # define unicode_is_inv_wchar(wc) ((wc) & 0x20000000)
103 # define unicode_is_inv_wchar(wc) 0
108 /* We use int16_t for positions, need to limit line len */
109 MAX_LINELEN = CONFIG_FEATURE_EDITING_MAX_LEN < 0x7ff0
110 ? CONFIG_FEATURE_EDITING_MAX_LEN
114 #if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
115 static const char null_str[] ALIGN1 = "";
118 /* We try to minimize both static and stack usage. */
119 struct lineedit_statics {
122 volatile unsigned cmdedit_termw; /* = 80; */ /* actual terminal width */
123 sighandler_t previous_SIGWINCH_handler;
125 unsigned cmdedit_x; /* real x (col) terminal position */
126 unsigned cmdedit_y; /* pseudoreal y (row) terminal position */
127 unsigned cmdedit_prmt_len; /* length of prompt (without colors etc) */
130 int command_len; /* must be signed */
131 /* signed maxsize: we want x in "if (x > S.maxsize)"
132 * to _not_ be promoted to unsigned */
136 const char *cmdedit_prompt;
137 #if ENABLE_FEATURE_EDITING_FANCY_PROMPT
138 int num_ok_lines; /* = 1; */
141 #if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
143 char *home_pwd_buf; /* = (char*)null_str; */
146 #if ENABLE_FEATURE_TAB_COMPLETION
148 unsigned num_matches;
151 #if ENABLE_FEATURE_EDITING_VI
152 #define DELBUFSIZ 128
154 smallint newdelflag; /* whether delbuf should be reused yet */
155 CHAR_T delbuf[DELBUFSIZ]; /* a place to store deleted characters */
157 #if ENABLE_FEATURE_EDITING_ASK_TERMINAL
158 smallint sent_ESC_br6n;
161 /* Formerly these were big buffers on stack: */
162 #if ENABLE_FEATURE_TAB_COMPLETION
163 char exe_n_cwd_tab_completion__dirbuf[MAX_LINELEN];
164 char input_tab__matchBuf[MAX_LINELEN];
165 int16_t find_match__int_buf[MAX_LINELEN + 1]; /* need to have 9 bits at least */
166 int16_t find_match__pos_buf[MAX_LINELEN + 1];
170 /* See lineedit_ptr_hack.c */
171 extern struct lineedit_statics *const lineedit_ptr_to_statics;
173 #define S (*lineedit_ptr_to_statics)
174 #define state (S.state )
175 #define cmdedit_termw (S.cmdedit_termw )
176 #define previous_SIGWINCH_handler (S.previous_SIGWINCH_handler)
177 #define cmdedit_x (S.cmdedit_x )
178 #define cmdedit_y (S.cmdedit_y )
179 #define cmdedit_prmt_len (S.cmdedit_prmt_len)
180 #define cursor (S.cursor )
181 #define command_len (S.command_len )
182 #define command_ps (S.command_ps )
183 #define cmdedit_prompt (S.cmdedit_prompt )
184 #define num_ok_lines (S.num_ok_lines )
185 #define user_buf (S.user_buf )
186 #define home_pwd_buf (S.home_pwd_buf )
187 #define matches (S.matches )
188 #define num_matches (S.num_matches )
189 #define delptr (S.delptr )
190 #define newdelflag (S.newdelflag )
191 #define delbuf (S.delbuf )
193 #define INIT_S() do { \
194 (*(struct lineedit_statics**)&lineedit_ptr_to_statics) = xzalloc(sizeof(S)); \
196 cmdedit_termw = 80; \
197 IF_FEATURE_EDITING_FANCY_PROMPT(num_ok_lines = 1;) \
198 IF_FEATURE_GETUSERNAME_AND_HOMEDIR(home_pwd_buf = (char*)null_str;) \
200 static void deinit_S(void)
202 #if ENABLE_FEATURE_EDITING_FANCY_PROMPT
203 /* This one is allocated only if FANCY_PROMPT is on
204 * (otherwise it points to verbatim prompt (NOT malloced) */
205 free((char*)cmdedit_prompt);
207 #if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
209 if (home_pwd_buf != null_str)
212 free(lineedit_ptr_to_statics);
214 #define DEINIT_S() deinit_S()
217 #if ENABLE_UNICODE_SUPPORT
218 static size_t load_string(const char *src, int maxsize)
220 ssize_t len = mbstowcs(command_ps, src, maxsize - 1);
226 static unsigned save_string(char *dst, unsigned maxsize)
228 # if !ENABLE_UNICODE_PRESERVE_BROKEN
229 ssize_t len = wcstombs(dst, command_ps, maxsize - 1);
239 while (dstpos < maxsize) {
242 while ((wc = command_ps[srcpos]) != 0
243 && !unicode_is_inv_wchar(wc)
247 command_ps[srcpos] = 0;
248 n = wcstombs(dst + dstpos, command_ps + n, maxsize - dstpos);
249 if (n < 0) /* should not happen */
252 if (wc == 0) /* usually is */
254 /* We do have invalid byte here! */
255 command_ps[srcpos] = wc; /* restore it */
257 if (dstpos == maxsize)
259 dst[dstpos++] = (char) wc;
265 /* I thought just fputwc(c, stdout) would work. But no... */
266 static void BB_PUTCHAR(wchar_t c)
268 char buf[MB_CUR_MAX + 1];
269 mbstate_t mbst = { 0 };
272 if (unicode_is_inv_wchar(c))
273 c = CONFIG_SUBST_WCHAR;
274 len = wcrtomb(buf, c, &mbst);
281 static size_t load_string(const char *src, int maxsize)
283 safe_strncpy(command_ps, src, maxsize);
284 return strlen(command_ps);
286 # if ENABLE_FEATURE_TAB_COMPLETION
287 static void save_string(char *dst, unsigned maxsize)
289 safe_strncpy(dst, command_ps, maxsize);
292 # define BB_PUTCHAR(c) bb_putchar(c)
296 /* Put 'command_ps[cursor]', cursor++.
297 * Advance cursor on screen. If we reached right margin, scroll text up
298 * and remove terminal margin effect by printing 'next_char' */
299 #define HACK_FOR_WRONG_WIDTH 1
300 static void put_cur_glyph_and_inc_cursor(void)
302 CHAR_T c = command_ps[cursor];
305 /* erase character after end of input string */
308 /* advance cursor only if we aren't at the end yet */
313 #if ENABLE_FEATURE_NONPRINTABLE_INVERSE_PUT
314 /* Display non-printable characters in reverse */
315 if (!BB_isprint(c)) {
322 printf("\033[7m%c\033[0m", c);
328 if (cmdedit_x >= cmdedit_termw) {
329 /* terminal is scrolled down */
332 #if HACK_FOR_WRONG_WIDTH
333 /* This works better if our idea of term width is wrong
334 * and it is actually wider (often happens on serial lines).
335 * Printing CR,LF *forces* cursor to next line.
336 * OTOH if terminal width is correct AND terminal does NOT
337 * have automargin (IOW: it is moving cursor to next line
338 * by itself (which is wrong for VT-10x terminals)),
339 * this will break things: there will be one extra empty line */
340 puts("\r"); /* + implicit '\n' */
342 /* VT-10x terminals don't wrap cursor to next line when last char
343 * on the line is printed - cursor stays "over" this char.
344 * Need to print _next_ char too (first one to appear on next line)
345 * to make cursor move down to next line.
347 /* Works ok only if cmdedit_termw is correct. */
348 c = command_ps[cursor];
357 /* Move to end of line (by printing all chars till the end) */
358 static void put_till_end_and_adv_cursor(void)
360 while (cursor < command_len)
361 put_cur_glyph_and_inc_cursor();
364 /* Go to the next line */
365 static void goto_new_line(void)
367 put_till_end_and_adv_cursor();
373 static void out1str(const char *s)
379 static void beep(void)
384 /* Move back one character */
385 /* (optimized for slow terminals) */
386 static void input_backward(unsigned num)
396 if (cmdedit_x >= num) {
399 /* This is longer by 5 bytes on x86.
400 * Also gets miscompiled for ARM users
401 * (busybox.net/bugs/view.php?id=2274).
402 * printf(("\b\b\b\b" + 4) - num);
410 printf("\033[%uD", num);
414 /* Need to go one or more lines up */
417 unsigned w = cmdedit_termw; /* volatile var */
418 count_y = 1 + (num / w);
419 cmdedit_y -= count_y;
420 cmdedit_x = w * count_y - num;
422 /* go to 1st column; go up; go to correct column */
423 printf("\r" "\033[%dA" "\033[%dC", count_y, cmdedit_x);
426 static void put_prompt(void)
430 out1str(cmdedit_prompt);
433 w = cmdedit_termw; /* read volatile var once */
434 cmdedit_y = cmdedit_prmt_len / w; /* new quasireal y */
435 cmdedit_x = cmdedit_prmt_len % w;
438 /* draw prompt, editor line, and clear tail */
439 static void redraw(int y, int back_cursor)
441 if (y > 0) /* up to start y */
442 printf("\033[%uA", y);
445 put_till_end_and_adv_cursor();
446 printf(SEQ_CLEAR_TILL_END_OF_SCREEN);
447 input_backward(back_cursor);
450 /* Delete the char in front of the cursor, optionally saving it
451 * for later putback */
452 #if !ENABLE_FEATURE_EDITING_VI
453 static void input_delete(void)
454 #define input_delete(save) input_delete()
456 static void input_delete(int save)
461 if (j == (int)command_len)
464 #if ENABLE_FEATURE_EDITING_VI
470 if ((delptr - delbuf) < DELBUFSIZ)
471 *delptr++ = command_ps[j];
475 memmove(command_ps + j, command_ps + j + 1,
476 /* (command_len + 1 [because of NUL]) - (j + 1)
477 * simplified into (command_len - j) */
478 (command_len - j) * sizeof(command_ps[0]));
480 put_till_end_and_adv_cursor();
481 /* Last char is still visible, erase it (and more) */
482 printf(SEQ_CLEAR_TILL_END_OF_SCREEN);
483 input_backward(cursor - j); /* back to old pos cursor */
486 #if ENABLE_FEATURE_EDITING_VI
487 static void put(void)
490 int j = delptr - delbuf;
495 /* open hole and then fill it */
496 memmove(command_ps + cursor + j, command_ps + cursor,
497 (command_len - cursor + 1) * sizeof(command_ps[0]));
498 memcpy(command_ps + cursor, delbuf, j * sizeof(command_ps[0]));
500 put_till_end_and_adv_cursor();
501 input_backward(cursor - ocursor - j + 1); /* at end of new text */
505 /* Delete the char in back of the cursor */
506 static void input_backspace(void)
514 /* Move forward one character */
515 static void input_forward(void)
517 if (cursor < command_len)
518 put_cur_glyph_and_inc_cursor();
521 #if ENABLE_FEATURE_TAB_COMPLETION
523 static void free_tab_completion_data(void)
527 free(matches[--num_matches]);
533 static void add_match(char *matched)
535 matches = xrealloc_vector(matches, 4, num_matches);
536 matches[num_matches] = matched;
540 #if ENABLE_FEATURE_USERNAME_COMPLETION
541 static void username_tab_completion(char *ud, char *with_shash_flg)
543 struct passwd *entry;
546 ud++; /* ~user/... to user/... */
547 userlen = strlen(ud);
549 if (with_shash_flg) { /* "~/..." or "~user/..." */
550 char *sav_ud = ud - 1;
553 if (*ud == '/') { /* "~/..." */
558 temp = strchr(ud, '/');
559 *temp = '\0'; /* ~user\0 */
560 entry = getpwnam(ud);
561 *temp = '/'; /* restore ~user/... */
564 home = entry->pw_dir;
567 if ((userlen + strlen(home) + 1) < MAX_LINELEN) {
569 sprintf(sav_ud, "%s%s", home, ud);
574 /* Using _r function to avoid pulling in static buffers */
577 struct passwd *result;
580 while (!getpwent_r(&pwd, line_buff, sizeof(line_buff), &result)) {
581 /* Null usernames should result in all users as possible completions. */
582 if (/*!userlen || */ strncmp(ud, pwd.pw_name, userlen) == 0) {
583 add_match(xasprintf("~%s/", pwd.pw_name));
589 #endif /* FEATURE_COMMAND_USERNAME_COMPLETION */
597 static int path_parse(char ***p, int flags)
604 /* if not setenv PATH variable, to search cur dir "." */
605 if (flags != FIND_EXE_ONLY)
608 if (state->flags & WITH_PATH_LOOKUP)
609 pth = state->path_lookup;
611 pth = getenv("PATH");
612 /* PATH=<empty> or PATH=:<empty> */
613 if (!pth || !pth[0] || LONE_CHAR(pth, ':'))
617 npth = 1; /* path component count */
619 tmp = strchr(tmp, ':');
623 break; /* :<empty> */
627 res = xmalloc(npth * sizeof(char*));
628 res[0] = tmp = xstrdup(pth);
631 tmp = strchr(tmp, ':');
634 *tmp++ = '\0'; /* ':' -> '\0' */
636 break; /* :<empty> */
643 static void exe_n_cwd_tab_completion(char *command, int type)
649 char **paths = path1;
653 char *pfind = strrchr(command, '/');
654 /* char dirbuf[MAX_LINELEN]; */
655 #define dirbuf (S.exe_n_cwd_tab_completion__dirbuf)
658 path1[0] = (char*)".";
661 /* no dir, if flags==EXE_ONLY - get paths, else "." */
662 npaths = path_parse(&paths, type);
665 /* dirbuf = ".../.../.../" */
666 safe_strncpy(dirbuf, command, (pfind - command) + 2);
667 #if ENABLE_FEATURE_USERNAME_COMPLETION
668 if (dirbuf[0] == '~') /* ~/... or ~user/... */
669 username_tab_completion(dirbuf, dirbuf);
672 /* point to 'l' in "..../last_component" */
676 for (i = 0; i < npaths; i++) {
677 dir = opendir(paths[i]);
679 continue; /* don't print an error */
681 while ((next = readdir(dir)) != NULL) {
683 const char *str_found = next->d_name;
686 if (strncmp(str_found, pfind, strlen(pfind)))
688 /* not see .name without .match */
689 if (*str_found == '.' && *pfind == '\0') {
690 if (NOT_LONE_CHAR(paths[i], '/') || str_found[1])
692 str_found = ""; /* only "/" */
694 found = concat_path_file(paths[i], str_found);
695 /* hmm, remove in progress? */
696 /* NB: stat() first so that we see is it a directory;
697 * but if that fails, use lstat() so that
698 * we still match dangling links */
699 if (stat(found, &st) && lstat(found, &st))
701 /* find with dirs? */
702 if (paths[i] != dirbuf)
703 strcpy(found, next->d_name); /* only name */
705 len1 = strlen(found);
706 found = xrealloc(found, len1 + 2);
708 found[len1+1] = '\0';
710 if (S_ISDIR(st.st_mode)) {
711 /* name is a directory */
712 if (found[len1-1] != '/') {
716 /* not put found file if search only dirs for cd */
717 if (type == FIND_DIR_ONLY)
720 /* Add it to the list */
728 if (paths != path1) {
729 free(paths[0]); /* allocated memory is only in first member */
735 /* QUOT is used on elements of int_buf[], which are bytes,
736 * not Unicode chars. Therefore it works correctly even in Unicode mode.
738 #define QUOT (UCHAR_MAX+1)
740 #define int_buf (S.find_match__int_buf)
741 #define pos_buf (S.find_match__pos_buf)
742 /* is must be <= in */
743 static void collapse_pos(int is, int in)
745 memmove(int_buf+is, int_buf+in, (MAX_LINELEN+1-in)*sizeof(int_buf[0]));
746 memmove(pos_buf+is, pos_buf+in, (MAX_LINELEN+1-in)*sizeof(pos_buf[0]));
748 static NOINLINE int find_match(char *matchBuf, int *len_with_quotes)
753 /* Were local, but it uses too much stack */
754 /* int16_t int_buf[MAX_LINELEN + 1]; */
755 /* int16_t pos_buf[MAX_LINELEN + 1]; */
757 /* set to integer dimension characters and own positions */
759 int_buf[i] = (unsigned char)matchBuf[i];
760 if (int_buf[i] == 0) {
761 pos_buf[i] = -1; /* end-fo-line indicator */
767 /* mask \+symbol and convert '\t' to ' ' */
768 for (i = j = 0; matchBuf[i]; i++, j++)
769 if (matchBuf[i] == '\\') {
770 collapse_pos(j, j + 1);
773 #if ENABLE_FEATURE_NONPRINTABLE_INVERSE_PUT
774 if (matchBuf[i] == '\t') /* algorithm equivalent */
775 int_buf[j] = ' ' | QUOT;
778 #if ENABLE_FEATURE_NONPRINTABLE_INVERSE_PUT
779 else if (matchBuf[i] == '\t')
783 /* mask "symbols" or 'symbols' */
785 for (i = 0; int_buf[i]; i++) {
787 if (c == '\'' || c == '"') {
796 } else if (c2 != 0 && c != '$')
800 /* skip commands with arguments if line has commands delimiters */
801 /* ';' ';;' '&' '|' '&&' '||' but `>&' `<&' `>|' */
802 for (i = 0; int_buf[i]; i++) {
805 j = i ? int_buf[i - 1] : -1;
807 if (c == ';' || c == '&' || c == '|') {
808 command_mode = 1 + (c == c2);
810 if (j == '>' || j == '<')
812 } else if (c == '|' && j == '>')
816 collapse_pos(0, i + command_mode);
817 i = -1; /* hack incremet */
820 /* collapse `command...` */
821 for (i = 0; int_buf[i]; i++) {
822 if (int_buf[i] == '`') {
823 for (j = i + 1; int_buf[j]; j++)
824 if (int_buf[j] == '`') {
825 collapse_pos(i, j + 1);
830 /* not found closing ` - command mode, collapse all previous */
831 collapse_pos(0, i + 1);
834 i--; /* hack incremet */
838 /* collapse (command...(command...)...) or {command...{command...}...} */
839 c = 0; /* "recursive" level */
841 for (i = 0; int_buf[i]; i++) {
842 if (int_buf[i] == '(' || int_buf[i] == '{') {
843 if (int_buf[i] == '(')
847 collapse_pos(0, i + 1);
848 i = -1; /* hack incremet */
851 for (i = 0; pos_buf[i] >= 0 && (c > 0 || c2 > 0); i++) {
852 if ((int_buf[i] == ')' && c > 0) || (int_buf[i] == '}' && c2 > 0)) {
853 if (int_buf[i] == ')')
857 collapse_pos(0, i + 1);
858 i = -1; /* hack incremet */
862 /* skip first not quote space */
863 for (i = 0; int_buf[i]; i++)
864 if (int_buf[i] != ' ')
869 /* set find mode for completion */
870 command_mode = FIND_EXE_ONLY;
871 for (i = 0; int_buf[i]; i++) {
872 if (int_buf[i] == ' ' || int_buf[i] == '<' || int_buf[i] == '>') {
873 if (int_buf[i] == ' ' && command_mode == FIND_EXE_ONLY
874 && matchBuf[pos_buf[0]] == 'c'
875 && matchBuf[pos_buf[1]] == 'd'
877 command_mode = FIND_DIR_ONLY;
879 command_mode = FIND_FILE_ONLY;
884 for (i = 0; int_buf[i]; i++)
887 for (--i; i >= 0; i--) {
889 if (c == ' ' || c == '<' || c == '>' || c == '|' || c == '&') {
890 collapse_pos(0, i + 1);
894 /* skip first not quoted '\'' or '"' */
895 for (i = 0; int_buf[i] == '\'' || int_buf[i] == '"'; i++)
897 /* collapse quote or unquote // or /~ */
898 while ((int_buf[i] & ~QUOT) == '/'
899 && ((int_buf[i+1] & ~QUOT) == '/' || (int_buf[i+1] & ~QUOT) == '~')
904 /* set only match and destroy quotes */
906 for (c = 0; pos_buf[i] >= 0; i++) {
907 matchBuf[c++] = matchBuf[pos_buf[i]];
911 /* old length matchBuf with quotes symbols */
912 *len_with_quotes = j ? j - pos_buf[0] : 0;
920 * display by column (original idea from ls applet,
921 * very optimized by me :)
923 static void showfiles(void)
926 int column_width = 0;
927 int nfiles = num_matches;
931 /* find the longest file name - use that as the column width */
932 for (row = 0; row < nrows; row++) {
933 l = unicode_strlen(matches[row]);
934 if (column_width < l)
937 column_width += 2; /* min space for columns */
938 ncols = cmdedit_termw / column_width;
943 nrows++; /* round up fractionals */
947 for (row = 0; row < nrows; row++) {
951 for (nc = 1; nc < ncols && n+nrows < nfiles; n += nrows, nc++) {
952 printf("%s%-*s", matches[n],
953 (int)(column_width - unicode_strlen(matches[n])), ""
960 static char *add_quote_for_spec_chars(char *found)
963 char *s = xzalloc((strlen(found) + 1) * 2);
966 if (strchr(" `\"#$%^&*()=+{}[]:;'|\\<>", *found))
970 /* s[l] = '\0'; - already is */
974 /* Do TAB completion */
975 static void input_tab(smallint *lastWasTab)
977 if (!(state->flags & TAB_COMPLETION))
983 /* char matchBuf[MAX_LINELEN]; */
984 #define matchBuf (S.input_tab__matchBuf)
987 #if ENABLE_UNICODE_SUPPORT
988 /* cursor pos in command converted to multibyte form */
992 *lastWasTab = TRUE; /* flop trigger */
994 /* Make a local copy of the string --
995 * up to the position of the cursor */
996 save_string(matchBuf, cursor + 1);
997 #if ENABLE_UNICODE_SUPPORT
998 cursor_mb = strlen(matchBuf);
1002 find_type = find_match(matchBuf, &recalc_pos);
1004 /* Free up any memory already allocated */
1005 free_tab_completion_data();
1007 #if ENABLE_FEATURE_USERNAME_COMPLETION
1008 /* If the word starts with `~' and there is no slash in the word,
1009 * then try completing this word as a username. */
1010 if (state->flags & USERNAME_COMPLETION)
1011 if (matchBuf[0] == '~' && strchr(matchBuf, '/') == NULL)
1012 username_tab_completion(matchBuf, NULL);
1014 /* Try to match any executable in our path and everything
1015 * in the current working directory */
1017 exe_n_cwd_tab_completion(matchBuf, find_type);
1018 /* Sort, then remove any duplicates found */
1022 qsort_string_vector(matches, num_matches);
1023 for (i = 0; i < num_matches - 1; ++i) {
1024 if (matches[i] && matches[i+1]) { /* paranoia */
1025 if (strcmp(matches[i], matches[i+1]) == 0) {
1027 matches[i] = NULL; /* paranoia */
1029 matches[n++] = matches[i];
1033 matches[n] = matches[i];
1034 num_matches = n + 1;
1036 /* Did we find exactly one match? */
1037 if (!matches || num_matches > 1) { /* no */
1040 return; /* not found */
1041 /* find minimal match */
1042 tmp1 = xstrdup(matches[0]);
1043 for (tmp = tmp1; *tmp; tmp++) {
1044 for (len_found = 1; len_found < num_matches; len_found++) {
1045 if (matches[len_found][tmp - tmp1] != *tmp) {
1051 if (*tmp1 == '\0') { /* have unique */
1055 tmp = add_quote_for_spec_chars(tmp1);
1057 } else { /* one match */
1058 tmp = add_quote_for_spec_chars(matches[0]);
1059 /* for next completion current found */
1060 *lastWasTab = FALSE;
1062 len_found = strlen(tmp);
1063 if (tmp[len_found-1] != '/') {
1064 tmp[len_found] = ' ';
1065 tmp[len_found+1] = '\0';
1069 len_found = strlen(tmp);
1070 #if !ENABLE_UNICODE_SUPPORT
1071 /* have space to place the match? */
1072 /* The result consists of three parts with these lengths: */
1073 /* (cursor - recalc_pos) + len_found + (command_len - cursor) */
1074 /* it simplifies into: */
1075 if ((int)(len_found + command_len - recalc_pos) < S.maxsize) {
1077 strcpy(matchBuf, command_ps + cursor);
1078 /* add match and tail */
1079 sprintf(&command_ps[cursor - recalc_pos], "%s%s", tmp, matchBuf);
1080 command_len = strlen(command_ps);
1082 recalc_pos = cursor - recalc_pos + len_found;
1083 /* write out the matched command */
1084 redraw(cmdedit_y, command_len - recalc_pos);
1088 char command[MAX_LINELEN];
1089 int len = save_string(command, sizeof(command));
1090 /* have space to place the match? */
1091 /* (cursor_mb - recalc_pos) + len_found + (len - cursor_mb) */
1092 if ((int)(len_found + len - recalc_pos) < MAX_LINELEN) {
1094 strcpy(matchBuf, command + cursor_mb);
1095 /* where do we want to have cursor after all? */
1096 strcpy(&command[cursor_mb - recalc_pos], tmp);
1097 len = load_string(command, S.maxsize);
1098 /* add match and tail */
1099 sprintf(&command[cursor_mb - recalc_pos], "%s%s", tmp, matchBuf);
1100 command_len = load_string(command, S.maxsize);
1101 /* write out the matched command */
1102 redraw(cmdedit_y, command_len - len);
1109 /* Ok -- the last char was a TAB. Since they
1110 * just hit TAB again, print a list of all the
1111 * available choices... */
1112 if (matches && num_matches > 0) {
1113 /* changed by goto_new_line() */
1114 int sav_cursor = cursor;
1116 /* Go to the next line */
1119 redraw(0, command_len - sav_cursor);
1124 #endif /* FEATURE_COMMAND_TAB_COMPLETION */
1127 line_input_t* FAST_FUNC new_line_input_t(int flags)
1129 line_input_t *n = xzalloc(sizeof(*n));
1137 static void save_command_ps_at_cur_history(void)
1139 if (command_ps[0] != BB_NUL) {
1140 int cur = state->cur_history;
1141 free(state->history[cur]);
1143 # if ENABLE_UNICODE_SUPPORT
1145 char tbuf[MAX_LINELEN];
1146 save_string(tbuf, sizeof(tbuf));
1147 state->history[cur] = xstrdup(tbuf);
1150 state->history[cur] = xstrdup(command_ps);
1155 /* state->flags is already checked to be nonzero */
1156 static int get_previous_history(void)
1158 if ((state->flags & DO_HISTORY) && state->cur_history) {
1159 save_command_ps_at_cur_history();
1160 state->cur_history--;
1167 static int get_next_history(void)
1169 if (state->flags & DO_HISTORY) {
1170 if (state->cur_history < state->cnt_history) {
1171 save_command_ps_at_cur_history(); /* save the current history line */
1172 return ++state->cur_history;
1179 # if ENABLE_FEATURE_EDITING_SAVEHISTORY
1180 /* We try to ensure that concurrent additions to the history
1181 * do not overwrite each other.
1182 * Otherwise shell users get unhappy.
1184 * History file is trimmed lazily, when it grows several times longer
1185 * than configured MAX_HISTORY lines.
1188 static void free_line_input_t(line_input_t *n)
1190 int i = n->cnt_history;
1192 free(n->history[--i]);
1196 /* state->flags is already checked to be nonzero */
1197 static void load_history(line_input_t *st_parm)
1199 char *temp_h[MAX_HISTORY];
1202 unsigned idx, i, line_len;
1204 /* NB: do not trash old history if file can't be opened */
1206 fp = fopen_for_read(st_parm->hist_file);
1208 /* clean up old history */
1209 for (idx = st_parm->cnt_history; idx > 0;) {
1211 free(st_parm->history[idx]);
1212 st_parm->history[idx] = NULL;
1215 /* fill temp_h[], retaining only last MAX_HISTORY lines */
1216 memset(temp_h, 0, sizeof(temp_h));
1217 st_parm->cnt_history_in_file = idx = 0;
1218 while ((line = xmalloc_fgetline(fp)) != NULL) {
1219 if (line[0] == '\0') {
1225 st_parm->cnt_history_in_file++;
1227 if (idx == MAX_HISTORY)
1232 /* find first non-NULL temp_h[], if any */
1233 if (st_parm->cnt_history_in_file) {
1234 while (temp_h[idx] == NULL) {
1236 if (idx == MAX_HISTORY)
1241 /* copy temp_h[] to st_parm->history[] */
1242 for (i = 0; i < MAX_HISTORY;) {
1247 if (idx == MAX_HISTORY)
1249 line_len = strlen(line);
1250 if (line_len >= MAX_LINELEN)
1251 line[MAX_LINELEN-1] = '\0';
1252 st_parm->history[i++] = line;
1254 st_parm->cnt_history = i;
1258 /* state->flags is already checked to be nonzero */
1259 static void save_history(char *str)
1264 fd = open(state->hist_file, O_WRONLY | O_CREAT | O_APPEND, 0666);
1267 xlseek(fd, 0, SEEK_END); /* paranoia */
1269 str[len] = '\n'; /* we (try to) do atomic write */
1270 len2 = full_write(fd, str, len + 1);
1273 if (len2 != len + 1)
1274 return; /* "wtf?" */
1276 /* did we write so much that history file needs trimming? */
1277 state->cnt_history_in_file++;
1278 if (state->cnt_history_in_file > MAX_HISTORY * 4) {
1281 line_input_t *st_temp;
1284 /* we may have concurrently written entries from others.
1286 st_temp = new_line_input_t(state->flags);
1287 st_temp->hist_file = state->hist_file;
1288 load_history(st_temp);
1290 /* write out temp file and replace hist_file atomically */
1291 new_name = xasprintf("%s.%u.new", state->hist_file, (int) getpid());
1292 fp = fopen_for_write(new_name);
1294 for (i = 0; i < st_temp->cnt_history; i++)
1295 fprintf(fp, "%s\n", st_temp->history[i]);
1297 if (rename(new_name, state->hist_file) == 0)
1298 state->cnt_history_in_file = st_temp->cnt_history;
1301 free_line_input_t(st_temp);
1305 # define load_history(a) ((void)0)
1306 # define save_history(a) ((void)0)
1307 # endif /* FEATURE_COMMAND_SAVEHISTORY */
1309 static void remember_in_history(char *str)
1313 if (!(state->flags & DO_HISTORY))
1317 i = state->cnt_history;
1318 /* Don't save dupes */
1319 if (i && strcmp(state->history[i-1], str) == 0)
1322 free(state->history[MAX_HISTORY]); /* redundant, paranoia */
1323 state->history[MAX_HISTORY] = NULL; /* redundant, paranoia */
1325 /* If history[] is full, remove the oldest command */
1326 /* we need to keep history[MAX_HISTORY] empty, hence >=, not > */
1327 if (i >= MAX_HISTORY) {
1328 free(state->history[0]);
1329 for (i = 0; i < MAX_HISTORY-1; i++)
1330 state->history[i] = state->history[i+1];
1331 /* i == MAX_HISTORY-1 */
1333 /* i <= MAX_HISTORY-1 */
1334 state->history[i++] = xstrdup(str);
1335 /* i <= MAX_HISTORY */
1336 state->cur_history = i;
1337 state->cnt_history = i;
1338 # if MAX_HISTORY > 0 && ENABLE_FEATURE_EDITING_SAVEHISTORY
1339 if ((state->flags & SAVE_HISTORY) && state->hist_file)
1342 IF_FEATURE_EDITING_FANCY_PROMPT(num_ok_lines++;)
1345 #else /* MAX_HISTORY == 0 */
1346 # define remember_in_history(a) ((void)0)
1347 #endif /* MAX_HISTORY */
1350 #if ENABLE_FEATURE_EDITING_VI
1352 * vi mode implemented 2005 by Paul Fox <pgf@foxharp.boston.ma.us>
1355 vi_Word_motion(int eat)
1357 CHAR_T *command = command_ps;
1359 while (cursor < command_len && !BB_isspace(command[cursor]))
1361 if (eat) while (cursor < command_len && BB_isspace(command[cursor]))
1366 vi_word_motion(int eat)
1368 CHAR_T *command = command_ps;
1370 if (BB_isalnum(command[cursor]) || command[cursor] == '_') {
1371 while (cursor < command_len
1372 && (BB_isalnum(command[cursor+1]) || command[cursor+1] == '_')
1376 } else if (BB_ispunct(command[cursor])) {
1377 while (cursor < command_len && BB_ispunct(command[cursor+1]))
1381 if (cursor < command_len)
1385 while (cursor < command_len && BB_isspace(command[cursor]))
1393 CHAR_T *command = command_ps;
1396 while (cursor < command_len && BB_isspace(command[cursor]))
1398 while (cursor < command_len-1 && !BB_isspace(command[cursor+1]))
1405 CHAR_T *command = command_ps;
1407 if (cursor >= command_len-1)
1410 while (cursor < command_len-1 && BB_isspace(command[cursor]))
1412 if (cursor >= command_len-1)
1414 if (BB_isalnum(command[cursor]) || command[cursor] == '_') {
1415 while (cursor < command_len-1
1416 && (BB_isalnum(command[cursor+1]) || command[cursor+1] == '_')
1420 } else if (BB_ispunct(command[cursor])) {
1421 while (cursor < command_len-1 && BB_ispunct(command[cursor+1]))
1427 vi_Back_motion(void)
1429 CHAR_T *command = command_ps;
1431 while (cursor > 0 && BB_isspace(command[cursor-1]))
1433 while (cursor > 0 && !BB_isspace(command[cursor-1]))
1438 vi_back_motion(void)
1440 CHAR_T *command = command_ps;
1445 while (cursor > 0 && BB_isspace(command[cursor]))
1449 if (BB_isalnum(command[cursor]) || command[cursor] == '_') {
1451 && (BB_isalnum(command[cursor-1]) || command[cursor-1] == '_')
1455 } else if (BB_ispunct(command[cursor])) {
1456 while (cursor > 0 && BB_ispunct(command[cursor-1]))
1462 /* Modelled after bash 4.0 behavior of Ctrl-<arrow> */
1463 static void ctrl_left(void)
1465 CHAR_T *command = command_ps;
1473 c = command[cursor];
1474 if (c != ' ' && !BB_ispunct(c)) {
1475 /* we reached a "word" delimited by spaces/punct.
1476 * go to its beginning */
1478 c = command[cursor - 1];
1479 if (c == ' ' || BB_ispunct(c))
1489 static void ctrl_right(void)
1491 CHAR_T *command = command_ps;
1496 c = command[cursor];
1499 if (c != ' ' && !BB_ispunct(c)) {
1500 /* we reached a "word" delimited by spaces/punct.
1501 * go to its end + 1 */
1504 c = command[cursor];
1505 if (c == BB_NUL || c == ' ' || BB_ispunct(c))
1516 * read_line_input and its helpers
1519 #if ENABLE_FEATURE_EDITING_ASK_TERMINAL
1520 static void ask_terminal(void)
1522 /* Ask terminal where is the cursor now.
1523 * lineedit_read_key handles response and corrects
1524 * our idea of current cursor position.
1525 * Testcase: run "echo -n long_line_long_line_long_line",
1526 * then type in a long, wrapping command and try to
1527 * delete it using backspace key.
1528 * Note: we print it _after_ prompt, because
1529 * prompt may contain CR. Example: PS1='\[\r\n\]\w '
1531 /* Problem: if there is buffered input on stdin,
1532 * the response will be delivered later,
1533 * possibly to an unsuspecting application.
1534 * Testcase: "sleep 1; busybox ash" + press and hold [Enter].
1536 * ~/srcdevel/bbox/fix/busybox.t4 #
1537 * ~/srcdevel/bbox/fix/busybox.t4 #
1538 * ^[[59;34~/srcdevel/bbox/fix/busybox.t4 # <-- garbage
1539 * ~/srcdevel/bbox/fix/busybox.t4 #
1541 * Checking for input with poll only makes the race narrower,
1542 * I still can trigger it. Strace:
1544 * write(1, "~/srcdevel/bbox/fix/busybox.t4 # ", 33) = 33
1545 * poll([{fd=0, events=POLLIN}], 1, 0) = 0 (Timeout) <-- no input exists
1546 * write(1, "\33[6n", 4) = 4 <-- send the ESC sequence, quick!
1547 * poll([{fd=0, events=POLLIN}], 1, 4294967295) = 1 ([{fd=0, revents=POLLIN}])
1548 * read(0, "\n", 1) = 1 <-- oh crap, user's input got in first
1552 pfd.fd = STDIN_FILENO;
1553 pfd.events = POLLIN;
1554 if (safe_poll(&pfd, 1, 0) == 0) {
1555 S.sent_ESC_br6n = 1;
1556 out1str("\033" "[6n");
1557 fflush_all(); /* make terminal see it ASAP! */
1561 #define ask_terminal() ((void)0)
1564 #if !ENABLE_FEATURE_EDITING_FANCY_PROMPT
1565 static void parse_and_put_prompt(const char *prmt_ptr)
1567 cmdedit_prompt = prmt_ptr;
1568 cmdedit_prmt_len = strlen(prmt_ptr);
1572 static void parse_and_put_prompt(const char *prmt_ptr)
1575 size_t cur_prmt_len = 0;
1576 char flg_not_length = '[';
1577 char *prmt_mem_ptr = xzalloc(1);
1578 char *cwd_buf = xrealloc_getcwd_or_warn(NULL);
1583 cmdedit_prmt_len = 0;
1586 cwd_buf = (char *)bb_msg_unknown;
1589 cbuf[1] = '\0'; /* never changes */
1592 char *free_me = NULL;
1597 const char *cp = prmt_ptr;
1600 c = bb_process_escape_sequence(&prmt_ptr);
1601 if (prmt_ptr == cp) {
1607 # if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
1609 pbuf = user_buf ? user_buf : (char*)"";
1613 pbuf = free_me = safe_gethostname();
1614 *strchrnul(pbuf, '.') = '\0';
1617 c = (geteuid() == 0 ? '#' : '$');
1619 # if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
1621 /* /home/user[/something] -> ~[/something] */
1623 l = strlen(home_pwd_buf);
1625 && strncmp(home_pwd_buf, cwd_buf, l) == 0
1626 && (cwd_buf[l]=='/' || cwd_buf[l]=='\0')
1627 && strlen(cwd_buf + l) < PATH_MAX
1629 pbuf = free_me = xasprintf("~%s", cwd_buf + l);
1635 cp = strrchr(pbuf, '/');
1636 if (cp != NULL && cp != pbuf)
1637 pbuf += (cp-pbuf) + 1;
1640 pbuf = free_me = xasprintf("%d", num_ok_lines);
1642 case 'e': case 'E': /* \e \E = \033 */
1645 case 'x': case 'X': {
1647 for (l = 0; l < 3;) {
1649 buf2[l++] = *prmt_ptr;
1651 h = strtoul(buf2, &pbuf, 16);
1652 if (h > UCHAR_MAX || (pbuf - buf2) < l) {
1658 c = (char)strtoul(buf2, NULL, 16);
1665 if (c == flg_not_length) {
1666 flg_not_length = (flg_not_length == '[' ? ']' : '[');
1674 cur_prmt_len = strlen(pbuf);
1675 prmt_len += cur_prmt_len;
1676 if (flg_not_length != ']')
1677 cmdedit_prmt_len += cur_prmt_len;
1678 prmt_mem_ptr = strcat(xrealloc(prmt_mem_ptr, prmt_len+1), pbuf);
1682 if (cwd_buf != (char *)bb_msg_unknown)
1684 cmdedit_prompt = prmt_mem_ptr;
1689 static void cmdedit_setwidth(unsigned w, int redraw_flg)
1693 /* new y for current cursor */
1694 int new_y = (cursor + cmdedit_prmt_len) / w;
1696 redraw((new_y >= cmdedit_y ? new_y : cmdedit_y), command_len - cursor);
1701 static void win_changed(int nsig)
1704 get_terminal_width_height(0, &width, NULL);
1705 cmdedit_setwidth(width, nsig /* - just a yes/no flag */);
1706 if (nsig == SIGWINCH)
1707 signal(SIGWINCH, win_changed); /* rearm ourself */
1710 static int lineedit_read_key(char *read_key_buffer)
1714 #if ENABLE_UNICODE_SUPPORT
1715 char unicode_buf[MB_CUR_MAX + 1];
1716 int unicode_idx = 0;
1720 /* Wait for input. TIMEOUT = -1 makes read_key wait even
1721 * on nonblocking stdin, TIMEOUT = 50 makes sure we won't
1722 * insist on full MB_CUR_MAX buffer to declare input like
1723 * "\xff\n",pause,"ls\n" invalid and thus won't lose "ls".
1725 * Note: read_key sets errno to 0 on success.
1727 ic = read_key(STDIN_FILENO, read_key_buffer, timeout);
1729 #if ENABLE_UNICODE_SUPPORT
1730 if (errno == EAGAIN && unicode_idx != 0)
1736 #if ENABLE_FEATURE_EDITING_ASK_TERMINAL
1737 if ((int32_t)ic == KEYCODE_CURSOR_POS
1740 S.sent_ESC_br6n = 0;
1741 if (cursor == 0) { /* otherwise it may be bogus */
1742 int col = ((ic >> 32) & 0x7fff) - 1;
1743 if (col > cmdedit_prmt_len) {
1744 cmdedit_x += (col - cmdedit_prmt_len);
1745 while (cmdedit_x >= cmdedit_termw) {
1746 cmdedit_x -= cmdedit_termw;
1755 #if ENABLE_UNICODE_SUPPORT
1756 if (unicode_status == UNICODE_ON) {
1759 if ((int32_t)ic < 0) /* KEYCODE_xxx */
1761 // TODO: imagine sequence like: 0xff,<left-arrow>: we are currently losing 0xff...
1763 unicode_buf[unicode_idx++] = ic;
1764 unicode_buf[unicode_idx] = '\0';
1765 if (mbstowcs(&wc, unicode_buf, 1) != 1) {
1766 /* Not (yet?) a valid unicode char */
1767 if (unicode_idx < MB_CUR_MAX) {
1772 /* Invalid sequence. Save all "bad bytes" except first */
1773 read_key_ungets(read_key_buffer, unicode_buf + 1, unicode_idx - 1);
1774 # if !ENABLE_UNICODE_PRESERVE_BROKEN
1775 ic = CONFIG_SUBST_WCHAR;
1777 ic = unicode_mark_inv_wchar(unicode_buf[0]);
1780 /* Valid unicode char, return its code */
1791 #if ENABLE_UNICODE_BIDI_SUPPORT
1792 static int isrtl_str(void)
1796 while (idx < command_len && unicode_bidi_is_neutral_wchar(command_ps[idx]))
1798 return unicode_bidi_isrtl(command_ps[idx]);
1801 # define isrtl_str() 0
1804 /* leave out the "vi-mode"-only case labels if vi editing isn't
1806 #define vi_case(caselabel) IF_FEATURE_EDITING_VI(case caselabel)
1808 /* convert uppercase ascii to equivalent control char, for readability */
1810 #define CTRL(a) ((a) & ~0x40)
1812 /* maxsize must be >= 2.
1814 * -1 on read errors or EOF, or on bare Ctrl-D,
1815 * 0 on ctrl-C (the line entered is still returned in 'command'),
1816 * >0 length of input string, including terminating '\n'
1818 int FAST_FUNC read_line_input(const char *prompt, char *command, int maxsize, line_input_t *st)
1821 #if ENABLE_FEATURE_TAB_COMPLETION
1822 smallint lastWasTab = FALSE;
1824 smallint break_out = 0;
1825 #if ENABLE_FEATURE_EDITING_VI
1826 smallint vi_cmdmode = 0;
1828 struct termios initial_settings;
1829 struct termios new_settings;
1830 char read_key_buffer[KEYCODE_BUFFER_SIZE];
1834 if (tcgetattr(STDIN_FILENO, &initial_settings) < 0
1835 || !(initial_settings.c_lflag & ECHO)
1837 /* Happens when e.g. stty -echo was run before */
1838 parse_and_put_prompt(prompt);
1839 /* fflush_all(); - done by parse_and_put_prompt */
1840 if (fgets(command, maxsize, stdin) == NULL)
1841 len = -1; /* EOF or error */
1843 len = strlen(command);
1850 // FIXME: audit & improve this
1851 if (maxsize > MAX_LINELEN)
1852 maxsize = MAX_LINELEN;
1853 S.maxsize = maxsize;
1855 /* With null flags, no other fields are ever used */
1856 state = st ? st : (line_input_t*) &const_int_0;
1858 # if ENABLE_FEATURE_EDITING_SAVEHISTORY
1859 if ((state->flags & SAVE_HISTORY) && state->hist_file)
1860 if (state->cnt_history == 0)
1861 load_history(state);
1863 if (state->flags & DO_HISTORY)
1864 state->cur_history = state->cnt_history;
1867 /* prepare before init handlers */
1868 cmdedit_y = 0; /* quasireal y, not true if line > xt*yt */
1870 #if ENABLE_UNICODE_SUPPORT
1871 command_ps = xzalloc(maxsize * sizeof(command_ps[0]));
1873 command_ps = command;
1876 #define command command_must_not_be_used
1878 new_settings = initial_settings;
1879 new_settings.c_lflag &= ~ICANON; /* unbuffered input */
1880 /* Turn off echoing and CTRL-C, so we can trap it */
1881 new_settings.c_lflag &= ~(ECHO | ECHONL | ISIG);
1882 /* Hmm, in linux c_cc[] is not parsed if ICANON is off */
1883 new_settings.c_cc[VMIN] = 1;
1884 new_settings.c_cc[VTIME] = 0;
1885 /* Turn off CTRL-C, so we can trap it */
1886 #ifndef _POSIX_VDISABLE
1887 # define _POSIX_VDISABLE '\0'
1889 new_settings.c_cc[VINTR] = _POSIX_VDISABLE;
1890 tcsetattr_stdin_TCSANOW(&new_settings);
1892 /* Now initialize things */
1893 previous_SIGWINCH_handler = signal(SIGWINCH, win_changed);
1894 win_changed(0); /* do initial resizing */
1895 #if ENABLE_FEATURE_GETUSERNAME_AND_HOMEDIR
1897 struct passwd *entry;
1899 entry = getpwuid(geteuid());
1901 user_buf = xstrdup(entry->pw_name);
1902 home_pwd_buf = xstrdup(entry->pw_dir);
1908 for (i = 0; i <= MAX_HISTORY; i++)
1909 bb_error_msg("history[%d]:'%s'", i, state->history[i]);
1910 bb_error_msg("cur_history:%d cnt_history:%d", state->cur_history, state->cnt_history);
1913 /* Print out the command prompt, optionally ask where cursor is */
1914 parse_and_put_prompt(prompt);
1917 read_key_buffer[0] = 0;
1920 * The emacs and vi modes share much of the code in the big
1921 * command loop. Commands entered when in vi's command mode
1922 * (aka "escape mode") get an extra bit added to distinguish
1923 * them - this keeps them from being self-inserted. This
1924 * clutters the big switch a bit, but keeps all the code
1928 VI_CMDMODE_BIT = 0x40000000,
1929 /* 0x80000000 bit flags KEYCODE_xxx */
1934 ic = ic_raw = lineedit_read_key(read_key_buffer);
1936 #if ENABLE_FEATURE_EDITING_VI
1939 /* btw, since KEYCODE_xxx are all < 0, this doesn't
1940 * change ic if it contains one of them: */
1941 ic |= VI_CMDMODE_BIT;
1948 vi_case('\n'|VI_CMDMODE_BIT:)
1949 vi_case('\r'|VI_CMDMODE_BIT:)
1955 vi_case('0'|VI_CMDMODE_BIT:)
1956 /* Control-a -- Beginning of line */
1957 input_backward(cursor);
1960 vi_case('h'|VI_CMDMODE_BIT:)
1961 vi_case('\b'|VI_CMDMODE_BIT:) /* ^H */
1962 vi_case('\x7f'|VI_CMDMODE_BIT:) /* DEL */
1963 input_backward(1); /* Move back one character */
1966 vi_case('$'|VI_CMDMODE_BIT:)
1967 /* Control-e -- End of line */
1968 put_till_end_and_adv_cursor();
1971 vi_case('l'|VI_CMDMODE_BIT:)
1972 vi_case(' '|VI_CMDMODE_BIT:)
1973 input_forward(); /* Move forward one character */
1976 case '\x7f': /* DEL */
1982 case KEYCODE_DELETE:
1988 #if ENABLE_FEATURE_TAB_COMPLETION
1990 input_tab(&lastWasTab);
1994 /* Control-k -- clear to end of line */
1995 command_ps[cursor] = BB_NUL;
1996 command_len = cursor;
1997 printf(SEQ_CLEAR_TILL_END_OF_SCREEN);
2000 vi_case(CTRL('L')|VI_CMDMODE_BIT:)
2001 /* Control-l -- clear screen */
2002 printf("\033[H"); /* cursor to top,left */
2003 redraw(0, command_len - cursor);
2007 vi_case(CTRL('N')|VI_CMDMODE_BIT:)
2008 vi_case('j'|VI_CMDMODE_BIT:)
2009 /* Control-n -- Get next command in history */
2010 if (get_next_history())
2014 vi_case(CTRL('P')|VI_CMDMODE_BIT:)
2015 vi_case('k'|VI_CMDMODE_BIT:)
2016 /* Control-p -- Get previous command from history */
2017 if (get_previous_history())
2022 vi_case(CTRL('U')|VI_CMDMODE_BIT:)
2023 /* Control-U -- Clear line before cursor */
2025 command_len -= cursor;
2026 memmove(command_ps, command_ps + cursor,
2027 (command_len + 1) * sizeof(command_ps[0]));
2028 redraw(cmdedit_y, command_len);
2032 vi_case(CTRL('W')|VI_CMDMODE_BIT:)
2033 /* Control-W -- Remove the last word */
2034 while (cursor > 0 && BB_isspace(command_ps[cursor-1]))
2036 while (cursor > 0 && !BB_isspace(command_ps[cursor-1]))
2040 #if ENABLE_FEATURE_EDITING_VI
2041 case 'i'|VI_CMDMODE_BIT:
2044 case 'I'|VI_CMDMODE_BIT:
2045 input_backward(cursor);
2048 case 'a'|VI_CMDMODE_BIT:
2052 case 'A'|VI_CMDMODE_BIT:
2053 put_till_end_and_adv_cursor();
2056 case 'x'|VI_CMDMODE_BIT:
2059 case 'X'|VI_CMDMODE_BIT:
2065 case 'W'|VI_CMDMODE_BIT:
2068 case 'w'|VI_CMDMODE_BIT:
2071 case 'E'|VI_CMDMODE_BIT:
2074 case 'e'|VI_CMDMODE_BIT:
2077 case 'B'|VI_CMDMODE_BIT:
2080 case 'b'|VI_CMDMODE_BIT:
2083 case 'C'|VI_CMDMODE_BIT:
2086 case 'D'|VI_CMDMODE_BIT:
2089 case 'c'|VI_CMDMODE_BIT:
2092 case 'd'|VI_CMDMODE_BIT: {
2095 ic = lineedit_read_key(read_key_buffer);
2096 if (errno) /* error */
2097 goto prepare_to_die;
2098 if (ic == ic_raw) { /* "cc", "dd" */
2099 input_backward(cursor);
2111 case 'w': /* "dw", "cw" */
2112 vi_word_motion(vi_cmdmode);
2114 case 'W': /* 'dW', 'cW' */
2115 vi_Word_motion(vi_cmdmode);
2117 case 'e': /* 'de', 'ce' */
2121 case 'E': /* 'dE', 'cE' */
2127 input_backward(cursor - sc);
2128 while (nc-- > cursor)
2131 case 'b': /* "db", "cb" */
2132 case 'B': /* implemented as B */
2137 while (sc-- > cursor)
2140 case ' ': /* "d ", "c " */
2143 case '$': /* "d$", "c$" */
2145 while (cursor < command_len)
2151 case 'p'|VI_CMDMODE_BIT:
2154 case 'P'|VI_CMDMODE_BIT:
2157 case 'r'|VI_CMDMODE_BIT:
2158 //FIXME: unicode case?
2159 ic = lineedit_read_key(read_key_buffer);
2160 if (errno) /* error */
2161 goto prepare_to_die;
2162 if (ic < ' ' || ic > 255) {
2165 command_ps[cursor] = ic;
2170 case '\x1b': /* ESC */
2171 if (state->flags & VI_MODE) {
2172 /* insert mode --> command mode */
2177 #endif /* FEATURE_COMMAND_EDITING_VI */
2181 if (get_previous_history())
2186 if (!get_next_history())
2189 /* Rewrite the line with the selected history item */
2190 /* change command */
2191 command_len = load_string(state->history[state->cur_history] ?
2192 state->history[state->cur_history] : "", maxsize);
2193 /* redraw and go to eol (bol, in vi) */
2194 redraw(cmdedit_y, (state->flags & VI_MODE) ? 9999 : 0);
2203 case KEYCODE_CTRL_LEFT:
2206 case KEYCODE_CTRL_RIGHT:
2210 input_backward(cursor);
2213 put_till_end_and_adv_cursor();
2217 if (initial_settings.c_cc[VINTR] != 0
2218 && ic_raw == initial_settings.c_cc[VINTR]
2220 /* Ctrl-C (usually) - stop gathering input */
2223 break_out = -1; /* "do not append '\n'" */
2226 if (initial_settings.c_cc[VEOF] != 0
2227 && ic_raw == initial_settings.c_cc[VEOF]
2229 /* Ctrl-D (usually) - delete one character,
2230 * or exit if len=0 and no chars to delete */
2231 if (command_len == 0) {
2233 #if ENABLE_FEATURE_EDITING_VI
2236 break_out = command_len = -1;
2242 // /* Control-V -- force insert of next char */
2243 // if (c == CTRL('V')) {
2244 // if (safe_read(STDIN_FILENO, &c, 1) < 1)
2245 // goto prepare_to_die;
2252 || (!ENABLE_UNICODE_SUPPORT && ic >= 256)
2253 || (ENABLE_UNICODE_SUPPORT && ic >= VI_CMDMODE_BIT)
2255 /* If VI_CMDMODE_BIT is set, ic is >= 256
2256 * and vi mode ignores unexpected chars.
2257 * Otherwise, we are here if ic is a
2258 * control char or an unhandled ESC sequence,
2259 * which is also ignored.
2263 if ((int)command_len >= (maxsize - 2)) {
2264 /* Not enough space for the char and EOL */
2269 if (cursor == (command_len - 1)) {
2270 /* We are at the end, append */
2271 command_ps[cursor] = ic;
2272 command_ps[cursor + 1] = BB_NUL;
2273 put_cur_glyph_and_inc_cursor();
2274 if (unicode_bidi_isrtl(ic))
2277 /* In the middle, insert */
2280 memmove(command_ps + sc + 1, command_ps + sc,
2281 (command_len - sc) * sizeof(command_ps[0]));
2282 command_ps[sc] = ic;
2283 /* is right-to-left char, or neutral one (e.g. comma) was just added to rtl text? */
2286 put_till_end_and_adv_cursor();
2287 /* to prev x pos + 1 */
2288 input_backward(cursor - sc);
2296 #if ENABLE_FEATURE_TAB_COMPLETION
2302 #if ENABLE_FEATURE_EDITING_ASK_TERMINAL
2303 if (S.sent_ESC_br6n) {
2304 /* "sleep 1; busybox ash" + hold [Enter] to trigger.
2305 * We sent "ESC [ 6 n", but got '\n' first, and
2306 * KEYCODE_CURSOR_POS response is now buffered from terminal.
2307 * It's bad already and not much can be done with it
2308 * (it _will_ be visible for the next process to read stdin),
2309 * but without this delay it even shows up on the screen
2310 * as garbage because we restore echo settings with tcsetattr
2311 * before it comes in. UGLY!
2317 /* Stop bug catching using "command_must_not_be_used" trick */
2320 #if ENABLE_UNICODE_SUPPORT
2322 if (command_len > 0)
2323 command_len = save_string(command, maxsize - 1);
2327 if (command_len > 0)
2328 remember_in_history(command);
2330 if (break_out > 0) {
2331 command[command_len++] = '\n';
2332 command[command_len] = '\0';
2335 #if ENABLE_FEATURE_TAB_COMPLETION
2336 free_tab_completion_data();
2339 /* restore initial_settings */
2340 tcsetattr_stdin_TCSANOW(&initial_settings);
2341 /* restore SIGWINCH handler */
2342 signal(SIGWINCH, previous_SIGWINCH_handler);
2348 return len; /* can't return command_len, DEINIT_S() destroys it */
2353 #undef read_line_input
2354 int FAST_FUNC read_line_input(const char* prompt, char* command, int maxsize)
2356 fputs(prompt, stdout);
2358 fgets(command, maxsize, stdin);
2359 return strlen(command);
2362 #endif /* FEATURE_EDITING */
2373 const char *applet_name = "debug stuff usage";
2375 int main(int argc, char **argv)
2377 char buff[MAX_LINELEN];
2379 #if ENABLE_FEATURE_EDITING_FANCY_PROMPT
2380 "\\[\\033[32;1m\\]\\u@\\[\\x1b[33;1m\\]\\h:"
2381 "\\[\\033[34;1m\\]\\w\\[\\033[35;1m\\] "
2382 "\\!\\[\\e[36;1m\\]\\$ \\[\\E[0m\\]";
2387 #if ENABLE_FEATURE_NONPRINTABLE_INVERSE_PUT
2388 setlocale(LC_ALL, "");
2392 l = read_line_input(prompt, buff);
2393 if (l <= 0 || buff[l-1] != '\n')
2396 printf("*** read_line_input() returned line =%s=\n", buff);
2398 printf("*** read_line_input() detect ^D\n");