2 * (C) Copyright 2000-2004
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
38 #if (CONFIG_COMMANDS & CFG_CMD_IDE)
41 #if (CONFIG_COMMANDS & CFG_CMD_SCSI)
44 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
47 #ifdef CONFIG_STATUS_LED
48 #include <status_led.h>
51 #ifdef CFG_ALLOC_DPRAM
52 #if !(defined(CONFIG_8260)||defined(CONFIG_MPC8560))
57 #if defined(CONFIG_BAB7xx)
61 #if defined(CONFIG_POST)
64 #if defined(CONFIG_LOGBUFFER)
67 #if defined(CFG_INIT_RAM_LOCK) && defined(CONFIG_E500)
68 #include <asm/cache.h>
74 #if (CONFIG_COMMANDS & CFG_CMD_DOC)
77 #if defined(CONFIG_HARD_I2C) || \
78 defined(CONFIG_SOFT_I2C)
81 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
82 void nand_init (void);
85 static char *failed = "*** failed ***\n";
87 #if defined(CONFIG_OXC) || defined(CONFIG_PCU_E) || defined(CONFIG_RMU)
88 extern flash_info_t flash_info[];
91 #include <environment.h>
93 #if defined(CFG_ENV_IS_EMBEDDED)
94 #define TOTAL_MALLOC_LEN CFG_MALLOC_LEN
95 #elif ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
96 (CFG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
97 defined(CFG_ENV_IS_IN_NVRAM)
98 #define TOTAL_MALLOC_LEN (CFG_MALLOC_LEN + CFG_ENV_SIZE)
100 #define TOTAL_MALLOC_LEN CFG_MALLOC_LEN
103 extern ulong __init_end;
105 ulong monitor_flash_len;
107 #if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
108 #include <bedbug/type.h>
112 * Begin and End of memory area for malloc(), and current "brk"
114 static ulong mem_malloc_start = 0;
115 static ulong mem_malloc_end = 0;
116 static ulong mem_malloc_brk = 0;
118 /************************************************************************
120 ************************************************************************
124 * The Malloc area is immediately below the monitor copy in DRAM
126 static void mem_malloc_init (void)
128 DECLARE_GLOBAL_DATA_PTR;
130 ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
132 mem_malloc_end = dest_addr;
133 mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
134 mem_malloc_brk = mem_malloc_start;
136 memset ((void *) mem_malloc_start,
138 mem_malloc_end - mem_malloc_start);
141 void *sbrk (ptrdiff_t increment)
143 ulong old = mem_malloc_brk;
144 ulong new = old + increment;
146 if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
149 mem_malloc_brk = new;
150 return ((void *) old);
153 char *strmhz (char *buf, long hz)
159 l = sprintf (buf, "%ld", n);
160 m = (hz % 1000000L) / 1000L;
162 sprintf (buf + l, ".%03ld", m);
167 * All attempts to come up with a "common" initialization sequence
168 * that works for all boards and architectures failed: some of the
169 * requirements are just _too_ different. To get rid of the resulting
170 * mess of board dependend #ifdef'ed code we now make the whole
171 * initialization sequence configurable to the user.
173 * The requirements for any new initalization function is simple: it
174 * receives a pointer to the "global data" structure as it's only
175 * argument, and returns an integer return code, where 0 means
176 * "continue" and != 0 means "fatal error, hang the system".
178 typedef int (init_fnc_t) (void);
180 /************************************************************************
182 ************************************************************************
183 * Some of this code should be moved into the core functions,
184 * but let's get it working (again) first...
187 static int init_baudrate (void)
189 DECLARE_GLOBAL_DATA_PTR;
191 uchar tmp[64]; /* long enough for environment variables */
192 int i = getenv_r ("baudrate", tmp, sizeof (tmp));
194 gd->baudrate = (i > 0)
195 ? (int) simple_strtoul (tmp, NULL, 10)
200 /***********************************************************************/
202 static int init_func_ram (void)
204 DECLARE_GLOBAL_DATA_PTR;
206 #ifdef CONFIG_BOARD_TYPES
207 int board_type = gd->board_type;
209 int board_type = 0; /* use dummy arg */
213 if ((gd->ram_size = initdram (board_type)) > 0) {
214 print_size (gd->ram_size, "\n");
221 /***********************************************************************/
223 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
224 static int init_func_i2c (void)
227 i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
233 /***********************************************************************/
235 #if defined(CONFIG_WATCHDOG)
236 static int init_func_watchdog_init (void)
238 puts (" Watchdog enabled\n");
242 # define INIT_FUNC_WATCHDOG_INIT init_func_watchdog_init,
244 static int init_func_watchdog_reset (void)
249 # define INIT_FUNC_WATCHDOG_RESET init_func_watchdog_reset,
251 # define INIT_FUNC_WATCHDOG_INIT /* undef */
252 # define INIT_FUNC_WATCHDOG_RESET /* undef */
253 #endif /* CONFIG_WATCHDOG */
255 /************************************************************************
256 * Initialization sequence *
257 ************************************************************************
260 init_fnc_t *init_sequence[] = {
262 #if defined(CONFIG_BOARD_EARLY_INIT_F)
266 #if !defined(CONFIG_TQM866M)
267 get_clocks, /* get CPU and bus clocks (etc.) */
268 #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M)
269 adjust_sdram_tbs_8xx,
273 #ifdef CFG_ALLOC_DPRAM
274 #if !(defined(CONFIG_8260) || defined(CONFIG_MPC8560))
278 #if defined(CONFIG_BOARD_POSTCLK_INIT)
282 #if defined(CONFIG_TQM866M)
283 get_clocks_866, /* get CPU and bus clocks according to the environment variable */
284 sdram_adjust_866, /* adjust sdram refresh rate according to the new clock */
291 #if defined(CONFIG_8260)
294 #endif /* CONFIG_8260 */
296 #if defined(CONFIG_MPC5xxx)
298 #endif /* CONFIG_MPC5xxx */
300 INIT_FUNC_WATCHDOG_INIT
301 #if defined(CONFIG_MISC_INIT_F)
304 INIT_FUNC_WATCHDOG_RESET
305 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
308 #if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */
314 INIT_FUNC_WATCHDOG_RESET
316 #if defined(CFG_DRAM_TEST)
318 #endif /* CFG_DRAM_TEST */
319 INIT_FUNC_WATCHDOG_RESET
321 NULL, /* Terminate this list */
324 /************************************************************************
326 * This is the first part of the initialization sequence that is
327 * implemented in C, but still running from ROM.
329 * The main purpose is to provide a (serial) console interface as
330 * soon as possible (so we can see any error messages), and to
331 * initialize the RAM so that we can relocate the monitor code to
334 * Be aware of the restrictions: global data is read-only, BSS is not
335 * initialized, and stack space is limited to a few kB.
337 ************************************************************************
340 void board_init_f (ulong bootflag)
342 DECLARE_GLOBAL_DATA_PTR;
345 ulong len, addr, addr_sp;
347 init_fnc_t **init_fnc_ptr;
351 uchar tmp[64]; /* long enough for environment variables */
354 /* Pointer is writable since we allocated a register for it */
355 gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
356 /* compiler optimization barrier needed for GCC >= 3.4 */
357 __asm__ __volatile__("": : :"memory");
359 #if !(defined(CONFIG_8260) || defined(CONFIG_MPC8560))
360 /* Clear initial global data */
361 memset ((void *) gd, 0, sizeof (gd_t));
364 for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
365 if ((*init_fnc_ptr) () != 0) {
371 * Now that we have DRAM mapped and working, we can
372 * relocate the code and continue running from DRAM.
374 * Reserve memory at end of RAM for (top down in that order):
375 * - kernel log buffer
379 * - board info struct
381 len = (ulong)&_end - CFG_MONITOR_BASE;
383 #ifndef CONFIG_VERY_BIG_RAM
384 addr = CFG_SDRAM_BASE + gd->ram_size;
386 /* only allow stack below 256M */
387 addr = CFG_SDRAM_BASE +
388 (gd->ram_size > 256 << 20) ? 256 << 20 : gd->ram_size;
391 #ifdef CONFIG_LOGBUFFER
392 /* reserve kernel log buffer */
393 addr -= (LOGBUFF_RESERVE);
394 debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
399 * reserve protected RAM
401 i = getenv_r ("pram", tmp, sizeof (tmp));
402 reg = (i > 0) ? simple_strtoul (tmp, NULL, 10) : CONFIG_PRAM;
403 addr -= (reg << 10); /* size is in kB */
404 debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
405 #endif /* CONFIG_PRAM */
407 /* round down to next 4 kB limit */
409 debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
412 /* reserve memory for LCD display (always full pages) */
413 addr = lcd_setmem (addr);
415 #endif /* CONFIG_LCD */
417 #if defined(CONFIG_VIDEO) && defined(CONFIG_8xx)
418 /* reserve memory for video display (always full pages) */
419 addr = video_setmem (addr);
421 #endif /* CONFIG_VIDEO */
424 * reserve memory for U-Boot code, data & bss
425 * round down to next 4 kB limit
430 debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
432 #ifdef CONFIG_AMIGAONEG3SE
433 gd->relocaddr = addr;
437 * reserve memory for malloc() arena
439 addr_sp = addr - TOTAL_MALLOC_LEN;
440 debug ("Reserving %dk for malloc() at: %08lx\n",
441 TOTAL_MALLOC_LEN >> 10, addr_sp);
444 * (permanently) allocate a Board Info struct
445 * and a permanent copy of the "global" data
447 addr_sp -= sizeof (bd_t);
448 bd = (bd_t *) addr_sp;
450 debug ("Reserving %d Bytes for Board Info at: %08lx\n",
451 sizeof (bd_t), addr_sp);
452 addr_sp -= sizeof (gd_t);
453 id = (gd_t *) addr_sp;
454 debug ("Reserving %d Bytes for Global Data at: %08lx\n",
455 sizeof (gd_t), addr_sp);
458 * Finally, we set up a new (bigger) stack.
460 * Leave some safety gap for SP, force alignment on 16 byte boundary
461 * Clear initial stack frame
465 *((ulong *) addr_sp)-- = 0;
466 *((ulong *) addr_sp)-- = 0;
467 debug ("Stack Pointer at: %08lx\n", addr_sp);
470 * Save local variables to board info struct
473 bd->bi_memstart = CFG_SDRAM_BASE; /* start of DRAM memory */
474 bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
477 bd->bi_sramstart = SRAM_BASE; /* start of SRAM memory */
478 bd->bi_sramsize = SRAM_SIZE; /* size of SRAM memory */
480 bd->bi_sramstart = 0; /* FIXME */ /* start of SRAM memory */
481 bd->bi_sramsize = 0; /* FIXME */ /* size of SRAM memory */
484 #if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
486 bd->bi_immr_base = CFG_IMMR; /* base of IMMR register */
488 #if defined(CONFIG_MPC5xxx)
489 bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */
492 bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
495 bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
496 bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
497 #if defined(CONFIG_8260) || defined(CONFIG_MPC8560)
498 bd->bi_cpmfreq = gd->cpm_clk;
499 bd->bi_brgfreq = gd->brg_clk;
500 bd->bi_sccfreq = gd->scc_clk;
501 bd->bi_vco = gd->vco_out;
502 #endif /* CONFIG_8260 */
503 #if defined(CONFIG_MPC5xxx)
504 bd->bi_ipbfreq = gd->ipb_clk;
505 bd->bi_pcifreq = gd->pci_clk;
506 #endif /* CONFIG_MPC5xxx */
507 bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
510 strncpy (bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
511 strncpy (bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version));
513 bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */
514 bd->bi_plb_busfreq = gd->bus_clk;
515 #if defined(CONFIG_405GP) || defined(CONFIG_405EP)
516 bd->bi_pci_busfreq = get_PCI_freq ();
517 bd->bi_opbfreq = get_OPB_freq ();
518 #elif defined(CONFIG_XILINX_ML300)
519 bd->bi_pci_busfreq = get_PCI_freq ();
523 debug ("New Stack Pointer is: %08lx\n", addr_sp);
528 post_bootmode_init();
529 post_run (NULL, POST_ROM | post_bootmode_get(0));
534 memcpy (id, (void *)gd, sizeof (gd_t));
536 relocate_code (addr_sp, id, addr);
538 /* NOTREACHED - relocate_code() does not return */
542 /************************************************************************
544 * This is the next part if the initialization sequence: we are now
545 * running from RAM and have a "normal" C environment, i. e. global
546 * data can be written, BSS has been cleared, the stack size in not
547 * that critical any more, etc.
549 ************************************************************************
552 void board_init_r (gd_t *id, ulong dest_addr)
554 DECLARE_GLOBAL_DATA_PTR;
559 extern void malloc_bin_reloc (void);
560 #ifndef CFG_ENV_IS_NOWHERE
561 extern char * env_name_spec;
568 gd = id; /* initialize RAM version of global data */
571 gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
573 debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
577 #if defined(CONFIG_BOARD_EARLY_INIT_R)
578 board_early_init_r ();
581 gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
583 monitor_flash_len = (ulong)&__init_end - dest_addr;
586 * We have to relocate the command table manually
588 for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) {
590 addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
592 printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
593 cmdtp->name, (ulong) (cmdtp->cmd), addr);
596 (int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
598 addr = (ulong)(cmdtp->name) + gd->reloc_off;
599 cmdtp->name = (char *)addr;
602 addr = (ulong)(cmdtp->usage) + gd->reloc_off;
603 cmdtp->usage = (char *)addr;
607 addr = (ulong)(cmdtp->help) + gd->reloc_off;
608 cmdtp->help = (char *)addr;
612 /* there are some other pointer constants we must deal with */
613 #ifndef CFG_ENV_IS_NOWHERE
614 env_name_spec += gd->reloc_off;
619 #ifdef CONFIG_LOGBUFFER
620 logbuff_init_ptrs ();
623 post_output_backlog ();
629 #if defined(CONFIG_IP860) || defined(CONFIG_PCU_E) || defined (CONFIG_FLAGADM)
630 icache_enable (); /* it's time to enable the instruction cache */
633 #if defined(CFG_INIT_RAM_LOCK) && defined(CONFIG_E500)
634 unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */
637 #if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45)
639 * Do PCI configuration on BAB7xx and CPC45 _before_ the flash
640 * gets initialised, because we need the ISA resp. PCI_to_LOCAL bus
645 #if defined(CONFIG_BAB7xx)
647 * Initialise the ISA bridge
649 initialise_w83c553f ();
652 asm ("sync ; isync");
655 * Setup trap handlers
657 trap_init (dest_addr);
659 #if !defined(CFG_NO_FLASH)
662 if ((flash_size = flash_init ()) > 0) {
663 # ifdef CFG_FLASH_CHECKSUM
664 print_size (flash_size, "");
666 * Compute and print flash CRC if flashchecksum is set to 'y'
668 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
670 s = getenv ("flashchecksum");
671 if (s && (*s == 'y')) {
672 printf (" CRC: %08lX",
673 crc32 (0, (const unsigned char *) CFG_FLASH_BASE, flash_size)
677 # else /* !CFG_FLASH_CHECKSUM */
678 print_size (flash_size, "\n");
679 # endif /* CFG_FLASH_CHECKSUM */
685 bd->bi_flashstart = CFG_FLASH_BASE; /* update start of FLASH memory */
686 bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */
687 # if defined(CONFIG_PCU_E) || defined(CONFIG_OXC) || defined(CONFIG_RMU)
688 /* flash mapped at end of memory map */
689 bd->bi_flashoffset = TEXT_BASE + flash_size;
690 # elif CFG_MONITOR_BASE == CFG_FLASH_BASE
691 bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */
693 bd->bi_flashoffset = 0;
695 #else /* CFG_NO_FLASH */
697 bd->bi_flashsize = 0;
698 bd->bi_flashstart = 0;
699 bd->bi_flashoffset = 0;
700 #endif /* !CFG_NO_FLASH */
704 /* initialize higher level parts of CPU like time base and timers */
709 /* initialize malloc() area */
714 # if !defined(CFG_ENV_IS_IN_EEPROM)
720 /* relocate environment function pointers etc. */
724 * Fill in missing fields of bd_info.
725 * We do this here, where we have "normal" access to the
726 * environment; we used to do this still running from ROM,
727 * where had to use getenv_r(), which can be pretty slow when
728 * the environment is in EEPROM.
731 #if defined(CFG_EXTBDINFO)
732 #if defined(CONFIG_405GP) || defined(CONFIG_405EP)
733 #if defined(CONFIG_I2CFAST)
735 * set bi_iic_fast for linux taking environment variable
736 * "i2cfast" into account
739 char *s = getenv ("i2cfast");
740 if (s && ((*s == 'y') || (*s == 'Y'))) {
741 bd->bi_iic_fast[0] = 1;
742 bd->bi_iic_fast[1] = 1;
744 bd->bi_iic_fast[0] = 0;
745 bd->bi_iic_fast[1] = 0;
749 bd->bi_iic_fast[0] = 0;
750 bd->bi_iic_fast[1] = 0;
751 #endif /* CONFIG_I2CFAST */
752 #endif /* CONFIG_405GP, CONFIG_405EP */
753 #endif /* CFG_EXTBDINFO */
755 s = getenv ("ethaddr");
756 #if defined (CONFIG_MBX) || defined (CONFIG_RPXCLASSIC) || defined(CONFIG_IAD210)
758 board_get_enetaddr (bd->bi_enetaddr);
761 for (i = 0; i < 6; ++i) {
762 bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
764 s = (*e) ? e + 1 : e;
767 if ((gd->board_type >> 16) == 2)
768 bd->bi_ethspeed = gd->board_type & 0xFFFF;
770 bd->bi_ethspeed = 0xFFFF;
774 load_sernum_ethaddr ();
777 #if defined(CFG_GT_6426x) || defined(CONFIG_PN62) || defined(CONFIG_PPCHAMELEONEVB) || \
778 defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8560ADS) || defined(CONFIG_440_GX)
779 /* handle the 2nd ethernet address */
781 s = getenv ("eth1addr");
783 for (i = 0; i < 6; ++i) {
784 bd->bi_enet1addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
786 s = (*e) ? e + 1 : e;
789 #if defined(CFG_GT_6426x) || defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8560ADS) || \
790 defined(CONFIG_440_GX)
791 /* handle the 3rd ethernet address */
793 s = getenv ("eth2addr");
794 #if defined(CONFIG_XPEDITE1K)
796 board_get_enetaddr(bd->bi_enet2addr);
799 for (i = 0; i < 6; ++i) {
800 bd->bi_enet2addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
802 s = (*e) ? e + 1 : e;
806 #if defined(CONFIG_440_GX)
807 /* handle 4th ethernet address */
808 s = getenv("eth3addr");
809 #if defined(CONFIG_XPEDITE1K)
811 board_get_enetaddr(bd->bi_enet3addr);
814 for (i = 0; i < 6; ++i) {
815 bd->bi_enet3addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
817 s = (*e) ? e + 1 : e;
821 #if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
822 defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
823 load_sernum_ethaddr ();
826 bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
830 #if defined(CONFIG_PCI) && !defined(CONFIG_BAB7xx) && !defined(CONFIG_CPC45)
832 * Do pci configuration
837 /** leave this here (after malloc(), environment and PCI are working) **/
838 /* Initialize devices */
841 /* Initialize the jump table for applications */
844 /* Initialize the console (after the relocation and devices init) */
847 #if defined(CONFIG_CCM) || \
848 defined(CONFIG_COGENT) || \
849 defined(CONFIG_CPCI405) || \
850 defined(CONFIG_EVB64260) || \
851 defined(CONFIG_KUP4K) || \
852 defined(CONFIG_KUP4X) || \
853 defined(CONFIG_LWMON) || \
854 defined(CONFIG_PCU_E) || \
855 defined(CONFIG_W7O) || \
856 defined(CONFIG_MISC_INIT_R)
857 /* miscellaneous platform dependent initialisations */
862 if (bd->bi_ethspeed != 0xFFFF)
863 hermes_start_lxt980 ((int) bd->bi_ethspeed);
866 #if (CONFIG_COMMANDS & CFG_CMD_NET) && ( \
867 defined(CONFIG_CCM) || \
868 defined(CONFIG_ELPT860) || \
869 defined(CONFIG_EP8260) || \
870 defined(CONFIG_IP860) || \
871 defined(CONFIG_IVML24) || \
872 defined(CONFIG_IVMS8) || \
873 defined(CONFIG_LWMON) || \
874 defined(CONFIG_MPC8260ADS) || \
875 defined(CONFIG_MPC8266ADS) || \
876 defined(CONFIG_MPC8560ADS) || \
877 defined(CONFIG_PCU_E) || \
878 defined(CONFIG_RPXSUPER) || \
879 defined(CONFIG_STXGP3) || \
880 defined(CONFIG_SPD823TS) )
883 debug ("Reset Ethernet PHY\n");
887 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
893 debug ("U-Boot relocated to %08lx\n", dest_addr);
900 /* Must happen after interrupts are initialized since
901 * an irq handler gets installed
903 #ifdef CONFIG_SERIAL_SOFTWARE_FIFO
904 serial_buffered_init();
907 #ifdef CONFIG_STATUS_LED
908 status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
915 /* Initialize from environment */
916 if ((s = getenv ("loadaddr")) != NULL) {
917 load_addr = simple_strtoul (s, NULL, 16);
919 #if (CONFIG_COMMANDS & CFG_CMD_NET)
920 if ((s = getenv ("bootfile")) != NULL) {
921 copy_filename (BootFile, s, sizeof (BootFile));
923 #endif /* CFG_CMD_NET */
927 #if (CONFIG_COMMANDS & CFG_CMD_SCSI)
933 #if (CONFIG_COMMANDS & CFG_CMD_DOC)
939 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
942 nand_init(); /* go init the NAND */
945 #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
952 post_run (NULL, POST_RAM | post_bootmode_get(0));
955 #if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) && !(CONFIG_COMMANDS & CFG_CMD_IDE)
961 #if (CONFIG_COMMANDS & CFG_CMD_IDE)
963 # ifdef CONFIG_IDE_8xx_PCCARD
969 #endif /* CFG_CMD_IDE */
971 #ifdef CONFIG_LAST_STAGE_INIT
974 * Some parts can be only initialized if all others (like
975 * Interrupts) are up and running (i.e. the PC-style ISA
981 #if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
986 #if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
988 * Export available size of memory for Linux,
989 * taking into account the protected RAM at top of memory
997 if ((s = getenv ("pram")) != NULL) {
998 pram = simple_strtoul (s, NULL, 10);
1005 #ifdef CONFIG_LOGBUFFER
1006 /* Also take the logbuffer into account (pram is in kB) */
1007 pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
1009 sprintf (memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
1010 setenv ("mem", memsz);
1014 #ifdef CONFIG_PS2KBD
1019 #ifdef CONFIG_MODEM_SUPPORT
1021 extern int do_mdm_init;
1022 do_mdm_init = gd->do_mdm_init;
1026 /* Initialization complete - start the monitor */
1028 /* main_loop() can return to retry autoboot, if so just run it again. */
1034 /* NOTREACHED - no way out of command loop except booting */
1039 puts ("### ERROR ### Please RESET the board ###\n");
1040 #ifdef CONFIG_SHOW_BOOT_PROGRESS
1041 show_boot_progress(-30);
1046 #ifdef CONFIG_MODEM_SUPPORT
1047 /* called from main loop (common/main.c) */
1048 extern void dbg(const char *fmt, ...);
1054 extern char console_buffer[];
1055 static inline void mdm_readline(char *buf, int bufsiz);
1056 extern void enable_putc(void);
1057 extern int hwflow_onoff(int);
1059 enable_putc(); /* enable serial_putc() */
1061 #ifdef CONFIG_HWFLOW
1062 init_str = getenv("mdm_flow_control");
1063 if (init_str && (strcmp(init_str, "rts/cts") == 0))
1070 sprintf(env_str, "mdm_init%d", i);
1071 if ((init_str = getenv(env_str)) != NULL) {
1072 serial_puts(init_str);
1075 mdm_readline(console_buffer, CFG_CBSIZE);
1076 dbg("ini%d: [%s]", i, console_buffer);
1078 if ((strcmp(console_buffer, "OK") == 0) ||
1079 (strcmp(console_buffer, "ERROR") == 0)) {
1080 dbg("ini%d: cmd done", i);
1082 } else /* in case we are originating call ... */
1083 if (strncmp(console_buffer, "CONNECT", 7) == 0) {
1084 dbg("ini%d: connect", i);
1089 break; /* no init string - stop modem init */
1096 /* final stage - wait for connect */
1097 for(;i > 1;) { /* if 'i' > 1 - wait for connection
1098 message from modem */
1099 mdm_readline(console_buffer, CFG_CBSIZE);
1100 dbg("ini_f: [%s]", console_buffer);
1101 if (strncmp(console_buffer, "CONNECT", 7) == 0) {
1102 dbg("ini_f: connected");
1110 /* 'inline' - We have to do it fast */
1111 static inline void mdm_readline(char *buf, int bufsiz)
1122 /* dbg("(%c)", c); */
1134 return; /* sanity check */
1144 #if 0 /* We could use plain global data, but the resulting code is bigger */
1146 * Pointer to initial global data area
1148 * Here we initialize it.
1150 #undef XTRN_DECLARE_GLOBAL_DATA_PTR
1151 #define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */
1152 DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
1155 /************************************************************************/