Revert "video: mxsfb: Configure the clock after eLCDIF reset"
[oweals/u-boot.git] / lib / optee / optee.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2017 Linaro
4  * Bryan O'Donoghue <bryan.odonoghue@linaro.org>
5  */
6
7 #include <common.h>
8 #include <malloc.h>
9 #include <linux/libfdt.h>
10 #include <tee/optee.h>
11
12 #define optee_hdr_err_msg \
13         "OPTEE verification error:" \
14         "\n\thdr=%p image=0x%08lx magic=0x%08x tzdram 0x%08lx-0x%08lx " \
15         "\n\theader lo=0x%08x hi=0x%08x size=0x%08lx arch=0x%08x" \
16         "\n\tuimage params 0x%08lx-0x%08lx\n"
17
18 int optee_verify_image(struct optee_header *hdr, unsigned long tzdram_start,
19                        unsigned long tzdram_len, unsigned long image_len)
20 {
21         unsigned long tzdram_end = tzdram_start + tzdram_len;
22         uint32_t tee_file_size;
23
24         tee_file_size = hdr->init_size + hdr->paged_size +
25                         sizeof(struct optee_header);
26
27         if (hdr->magic != OPTEE_MAGIC ||
28             hdr->version != OPTEE_VERSION ||
29             hdr->init_load_addr_hi > tzdram_end ||
30             hdr->init_load_addr_lo < tzdram_start ||
31             tee_file_size > tzdram_len ||
32             tee_file_size != image_len ||
33             (hdr->init_load_addr_lo + tee_file_size) > tzdram_end) {
34                 return -EINVAL;
35         }
36
37         return 0;
38 }
39
40 int optee_verify_bootm_image(unsigned long image_addr,
41                              unsigned long image_load_addr,
42                              unsigned long image_len)
43 {
44         struct optee_header *hdr = (struct optee_header *)image_addr;
45         unsigned long tzdram_start = CONFIG_OPTEE_TZDRAM_BASE;
46         unsigned long tzdram_len = CONFIG_OPTEE_TZDRAM_SIZE;
47
48         int ret;
49
50         ret = optee_verify_image(hdr, tzdram_start, tzdram_len, image_len);
51         if (ret)
52                 goto error;
53
54         if (image_load_addr + sizeof(*hdr) != hdr->init_load_addr_lo) {
55                 ret = -EINVAL;
56                 goto error;
57         }
58
59         return ret;
60 error:
61         printf(optee_hdr_err_msg, hdr, image_addr, hdr->magic, tzdram_start,
62                tzdram_start + tzdram_len, hdr->init_load_addr_lo,
63                hdr->init_load_addr_hi, image_len, hdr->arch, image_load_addr,
64                image_load_addr + image_len);
65
66         return ret;
67 }
68
69 #if defined(CONFIG_OF_LIBFDT)
70 static int optee_copy_firmware_node(const void *old_blob, void *fdt_blob)
71 {
72         int old_offs, offs, ret, len;
73         const void *prop;
74
75         old_offs = fdt_path_offset(old_blob, "/firmware/optee");
76         if (old_offs < 0) {
77                 debug("Original OP-TEE Device Tree node not found");
78                 return old_offs;
79         }
80
81         offs = fdt_path_offset(fdt_blob, "/firmware");
82         if (offs < 0) {
83                 offs = fdt_path_offset(fdt_blob, "/");
84                 if (offs < 0)
85                         return offs;
86
87                 offs = fdt_add_subnode(fdt_blob, offs, "firmware");
88                 if (offs < 0)
89                         return offs;
90         }
91
92         offs = fdt_add_subnode(fdt_blob, offs, "optee");
93         if (offs < 0)
94                 return ret;
95
96         /* copy the compatible property */
97         prop = fdt_getprop(old_blob, old_offs, "compatible", &len);
98         if (!prop) {
99                 debug("missing OP-TEE compatible property");
100                 return -EINVAL;
101         }
102
103         ret = fdt_setprop(fdt_blob, offs, "compatible", prop, len);
104         if (ret < 0)
105                 return ret;
106
107         /* copy the method property */
108         prop = fdt_getprop(old_blob, old_offs, "method", &len);
109         if (!prop) {
110                 debug("missing OP-TEE method property");
111                 return -EINVAL;
112         }
113
114         ret = fdt_setprop(fdt_blob, offs, "method", prop, len);
115         if (ret < 0)
116                 return ret;
117
118         return 0;
119 }
120
121 int optee_copy_fdt_nodes(const void *old_blob, void *new_blob)
122 {
123         int nodeoffset, subnode, ret;
124         struct fdt_resource res;
125
126         if (fdt_check_header(old_blob))
127                 return -EINVAL;
128
129         if (fdt_check_header(new_blob))
130                 return -EINVAL;
131
132         /* only proceed if there is an /firmware/optee node */
133         if (fdt_path_offset(old_blob, "/firmware/optee") < 0) {
134                 debug("No OP-TEE firmware node in old fdt, nothing to do");
135                 return 0;
136         }
137
138         /*
139          * Do not proceed if the target dt already has an OP-TEE node.
140          * In this case assume that the system knows better somehow,
141          * so do not interfere.
142          */
143         if (fdt_path_offset(new_blob, "/firmware/optee") >= 0) {
144                 debug("OP-TEE Device Tree node already exists in target");
145                 return 0;
146         }
147
148         ret = optee_copy_firmware_node(old_blob, new_blob);
149         if (ret < 0) {
150                 printf("Failed to add OP-TEE firmware node\n");
151                 return ret;
152         }
153
154         /* optee inserts its memory regions as reserved-memory nodes */
155         nodeoffset = fdt_subnode_offset(old_blob, 0, "reserved-memory");
156         if (nodeoffset >= 0) {
157                 subnode = fdt_first_subnode(old_blob, nodeoffset);
158                 while (subnode >= 0) {
159                         const char *name = fdt_get_name(old_blob,
160                                                         subnode, NULL);
161                         if (!name)
162                                 return -EINVAL;
163
164                         /* only handle optee reservations */
165                         if (strncmp(name, "optee", 5))
166                                 continue;
167
168                         /* check if this subnode has a reg property */
169                         ret = fdt_get_resource(old_blob, subnode, "reg", 0,
170                                                &res);
171                         if (!ret) {
172                                 struct fdt_memory carveout = {
173                                         .start = res.start,
174                                         .end = res.end,
175                                 };
176                                 char *oldname, *nodename, *tmp;
177
178                                 oldname = strdup(name);
179                                 if (!oldname)
180                                         return -ENOMEM;
181
182                                 tmp = oldname;
183                                 nodename = strsep(&tmp, "@");
184                                 if (!nodename) {
185                                         free(oldname);
186                                         return -EINVAL;
187                                 }
188
189                                 ret = fdtdec_add_reserved_memory(new_blob,
190                                                                  nodename,
191                                                                  &carveout,
192                                                                  NULL);
193                                 free(oldname);
194
195                                 if (ret < 0)
196                                         return ret;
197                         }
198
199                         subnode = fdt_next_subnode(old_blob, subnode);
200                 }
201         }
202
203         return 0;
204 }
205 #endif