efi_selftest: make tests easier to read
[oweals/u-boot.git] / lib / efi_selftest / efi_selftest_tpl.c
1 /*
2  * efi_selftest_events
3  *
4  * Copyright (c) 2017 Heinrich Schuchardt <xypron.glpk@gmx.de>
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  *
8  * This unit test uses timer events to check the handling of
9  * task priority levels.
10  */
11
12 #include <efi_selftest.h>
13
14 static struct efi_event *event_notify;
15 static struct efi_event *event_wait;
16 static unsigned int notification_count;
17 static struct efi_boot_services *boottime;
18
19 /*
20  * Notification function, increments the notification count.
21  *
22  * @event       notified event
23  * @context     pointer to the notification count
24  */
25 static void EFIAPI notify(struct efi_event *event, void *context)
26 {
27         unsigned int *count = context;
28
29         ++*count;
30 }
31
32 /*
33  * Setup unit test.
34  *
35  * Create two timer events.
36  * One with EVT_NOTIFY_SIGNAL, the other with EVT_NOTIFY_WAIT.
37  *
38  * @handle:     handle of the loaded image
39  * @systable:   system table
40  * @return:     EFI_ST_SUCCESS for success
41  */
42 static int setup(const efi_handle_t handle,
43                  const struct efi_system_table *systable)
44 {
45         efi_status_t ret;
46
47         boottime = systable->boottime;
48
49         ret = boottime->create_event(EVT_TIMER | EVT_NOTIFY_SIGNAL,
50                                      TPL_CALLBACK, notify,
51                                      (void *)&notification_count,
52                                      &event_notify);
53         if (ret != EFI_SUCCESS) {
54                 efi_st_error("could not create event\n");
55                 return EFI_ST_FAILURE;
56         }
57         ret = boottime->create_event(EVT_TIMER | EVT_NOTIFY_WAIT,
58                                      TPL_HIGH_LEVEL, notify, NULL, &event_wait);
59         if (ret != EFI_SUCCESS) {
60                 efi_st_error("could not create event\n");
61                 return EFI_ST_FAILURE;
62         }
63         return EFI_ST_SUCCESS;
64 }
65
66 /*
67  * Tear down unit test.
68  *
69  * Close the events created in setup.
70  *
71  * @return:     EFI_ST_SUCCESS for success
72  */
73 static int teardown(void)
74 {
75         efi_status_t ret;
76
77         if (event_notify) {
78                 ret = boottime->close_event(event_notify);
79                 event_notify = NULL;
80                 if (ret != EFI_SUCCESS) {
81                         efi_st_error("could not close event\n");
82                         return EFI_ST_FAILURE;
83                 }
84         }
85         if (event_wait) {
86                 ret = boottime->close_event(event_wait);
87                 event_wait = NULL;
88                 if (ret != EFI_SUCCESS) {
89                         efi_st_error("could not close event\n");
90                         return EFI_ST_FAILURE;
91                 }
92         }
93         boottime->restore_tpl(TPL_APPLICATION);
94         return EFI_ST_SUCCESS;
95 }
96
97 /*
98  * Execute unit test.
99  *
100  * Run a 10 ms periodic timer and check that it is called 10 times
101  * while waiting for 100 ms single shot timer.
102  *
103  * Raise the TPL level to the level of the 10 ms timer and observe
104  * that the notification function is not called again.
105  *
106  * Lower the TPL level and check that the queued notification
107  * function is called.
108  *
109  * @return:     EFI_ST_SUCCESS for success
110  */
111 static int execute(void)
112 {
113         unsigned long index;
114         efi_status_t ret;
115         UINTN old_tpl;
116
117         /* Set 10 ms timer */
118         notification_count = 0;
119         ret = boottime->set_timer(event_notify, EFI_TIMER_PERIODIC, 100000);
120         if (ret != EFI_SUCCESS) {
121                 efi_st_error("Could not set timer\n");
122                 return EFI_ST_FAILURE;
123         }
124         /* Set 100 ms timer */
125         ret = boottime->set_timer(event_wait, EFI_TIMER_RELATIVE, 1000000);
126         if (ret != EFI_SUCCESS) {
127                 efi_st_error("Could not set timer\n");
128                 return EFI_ST_FAILURE;
129         }
130         index = 5;
131         ret = boottime->wait_for_event(1, &event_wait, &index);
132         if (ret != EFI_SUCCESS) {
133                 efi_st_error("Could not wait for event\n");
134                 return EFI_ST_FAILURE;
135         }
136         ret = boottime->check_event(event_wait);
137         if (ret != EFI_NOT_READY) {
138                 efi_st_error("Signaled state was not cleared.\n");
139                 efi_st_printf("ret = %u\n", (unsigned int)ret);
140                 return EFI_ST_FAILURE;
141         }
142         if (index != 0) {
143                 efi_st_error("WaitForEvent returned wrong index\n");
144                 return EFI_ST_FAILURE;
145         }
146         efi_st_printf("Notification count with TPL level TPL_APPLICATION: %u\n",
147                       notification_count);
148         if (notification_count < 8 || notification_count > 12) {
149                 efi_st_error("Incorrect timing of events\n");
150                 return EFI_ST_FAILURE;
151         }
152         ret = boottime->set_timer(event_notify, EFI_TIMER_STOP, 0);
153         if (index != 0) {
154                 efi_st_error("Could not cancel timer\n");
155                 return EFI_ST_FAILURE;
156         }
157         /* Raise TPL level */
158         old_tpl = boottime->raise_tpl(TPL_CALLBACK);
159         if (old_tpl != TPL_APPLICATION) {
160                 efi_st_error("Initial TPL level was not TPL_APPLICATION");
161                 return EFI_ST_FAILURE;
162         }
163         /* Set 10 ms timer */
164         notification_count = 0;
165         ret = boottime->set_timer(event_notify, EFI_TIMER_PERIODIC, 100000);
166         if (index != 0) {
167                 efi_st_error("Could not set timer\n");
168                 return EFI_ST_FAILURE;
169         }
170         /* Set 100 ms timer */
171         ret = boottime->set_timer(event_wait, EFI_TIMER_RELATIVE, 1000000);
172         if (ret != EFI_SUCCESS) {
173                 efi_st_error("Could not set timer\n");
174                 return EFI_ST_FAILURE;
175         }
176         do {
177                 ret = boottime->check_event(event_wait);
178         } while (ret == EFI_NOT_READY);
179         if (ret != EFI_SUCCESS) {
180                 efi_st_error("Could not check event\n");
181                 return EFI_ST_FAILURE;
182         }
183         efi_st_printf("Notification count with TPL level TPL_CALLBACK: %u\n",
184                       notification_count);
185         if (notification_count != 0) {
186                 efi_st_error("Suppressed timer fired\n");
187                 return EFI_ST_FAILURE;
188         }
189         /* Set 1 ms timer */
190         ret = boottime->set_timer(event_wait, EFI_TIMER_RELATIVE, 1000);
191         if (ret != EFI_SUCCESS) {
192                 efi_st_error("Could not set timer\n");
193                 return EFI_ST_FAILURE;
194         }
195         /* Restore the old TPL level */
196         boottime->restore_tpl(TPL_APPLICATION);
197         ret = boottime->wait_for_event(1, &event_wait, &index);
198         if (ret != EFI_SUCCESS) {
199                 efi_st_error("Could not wait for event\n");
200                 return EFI_ST_FAILURE;
201         }
202         efi_st_printf("Notification count with TPL level TPL_APPLICATION: %u\n",
203                       notification_count);
204         if (notification_count < 1) {
205                 efi_st_error("Queued timer event did not fire\n");
206                 return EFI_ST_FAILURE;
207         }
208         ret = boottime->set_timer(event_wait, EFI_TIMER_STOP, 0);
209         if (index != 0) {
210                 efi_st_error("Could not cancel timer\n");
211                 return EFI_ST_FAILURE;
212         }
213
214         return EFI_ST_SUCCESS;
215 }
216
217 EFI_UNIT_TEST(tpl) = {
218         .name = "task priority levels",
219         .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
220         .setup = setup,
221         .execute = execute,
222         .teardown = teardown,
223 };