1 /* vi: set sw=8 ts=8: */
3 * This file suffers from chronically incorrect tabification
4 * of messages. Before editing this file:
5 * 1. Switch you editor to 8-space tab mode.
6 * 2. Do not use \t in messages, use real tab character.
7 * 3. Start each source line with message as follows:
8 * |<7 spaces>"text with tabs"....
10 * |<5 spaces>"\ntext with tabs"....
16 #define NOUSAGE_STR "\b"
20 #define acpid_trivial_usage \
21 "[-d] [-c CONFDIR] [-l LOGFILE] [-a ACTIONFILE] [-M MAPFILE] [-e PROC_EVENT_FILE] [-p PIDFILE]"
22 #define acpid_full_usage "\n\n" \
23 "Listen to ACPI events and spawn specific helpers on event arrival\n" \
25 "\n -c DIR Config directory [/etc/acpi]" \
26 "\n -d Don't daemonize, (implies -f)" \
27 "\n -e FILE /proc event file [/proc/acpi/event]" \
28 "\n -f Run in foreground" \
29 "\n -l FILE Log file [/var/log/acpid.log]" \
30 "\n -p FILE Pid file [/var/run/acpid.pid]" \
31 "\n -a FILE Action file [/etc/acpid.conf]" \
32 "\n -M FILE Map file [/etc/acpi.map]" \
33 IF_FEATURE_ACPID_COMPAT( \
34 "\n\nAccept and ignore compatibility options -g -m -s -S -v" \
37 #define acpid_example_usage \
38 "Without -e option, acpid uses all /dev/input/event* files\n" \
40 "# acpid -l /var/log/my-acpi-log\n" \
41 "# acpid -e /proc/acpi/event\n"
43 #define addgroup_trivial_usage \
44 "[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[USER] ") "GROUP"
45 #define addgroup_full_usage "\n\n" \
46 "Add a group " IF_FEATURE_ADDUSER_TO_GROUP("or add a user to a group") "\n" \
48 "\n -g GID Group id" \
49 "\n -S Create a system group" \
51 #define adduser_trivial_usage \
53 #define adduser_full_usage "\n\n" \
56 "\n -h DIR Home directory" \
57 "\n -g GECOS GECOS field" \
58 "\n -s SHELL Login shell" \
59 "\n -G GRP Add user to existing group" \
60 "\n -S Create a system user" \
61 "\n -D Don't assign a password" \
62 "\n -H Don't create home directory" \
65 #define adjtimex_trivial_usage \
66 "[-q] [-o OFF] [-f FREQ] [-p TCONST] [-t TICK]"
67 #define adjtimex_full_usage "\n\n" \
68 "Read and optionally set system timebase parameters. See adjtimex(2)\n" \
71 "\n -o OFF Time offset, microseconds" \
72 "\n -f FREQ Frequency adjust, integer kernel units (65536 is 1ppm)" \
73 "\n (positive values make clock run faster)" \
74 "\n -t TICK Microseconds per tick, usually 10000" \
77 #define ar_trivial_usage \
78 "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
79 #define ar_full_usage "\n\n" \
80 "Extract or list FILES from an ar archive\n" \
82 "\n -o Preserve original dates" \
83 "\n -p Extract to stdout" \
88 #define arp_trivial_usage \
89 "\n[-vn] [-H HWTYPE] [-i IF] -a [HOSTNAME]" \
90 "\n[-v] [-i IF] -d HOSTNAME [pub]" \
91 "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]" \
92 "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub" \
93 "\n[-v] [-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub"
94 #define arp_full_usage "\n\n" \
95 "Manipulate ARP cache\n" \
97 "\n -a Display (all) hosts" \
98 "\n -s Set new ARP entry" \
99 "\n -d Delete a specified entry" \
101 "\n -n Don't resolve names" \
102 "\n -i IF Network interface" \
103 "\n -D Read <hwaddr> from given device" \
104 "\n -A,-p AF Protocol family" \
105 "\n -H HWTYPE Hardware address type" \
107 #define arping_trivial_usage \
108 "[-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP"
109 #define arping_full_usage "\n\n" \
110 "Send ARP requests/replies\n" \
112 "\n -f Quit on first ARP reply" \
114 "\n -b Keep broadcasting, don't go unicast" \
115 "\n -D Duplicated address detection mode" \
116 "\n -U Unsolicited ARP mode, update your neighbors" \
117 "\n -A ARP answer mode, update your neighbors" \
118 "\n -c N Stop after sending N ARP requests" \
119 "\n -w TIMEOUT Time to wait for ARP reply, seconds" \
120 "\n -I IFACE Interface to use (default eth0)" \
121 "\n -s SRC_IP Sender IP address" \
122 "\n DST_IP Target IP address" \
124 #define awk_trivial_usage \
125 "[OPTIONS] [AWK_PROGRAM] [FILE]..."
126 #define awk_full_usage "\n\n" \
128 "\n -v VAR=VAL Set variable" \
129 "\n -F SEP Use SEP as field separator" \
130 "\n -f FILE Read program from FILE" \
132 #define basename_trivial_usage \
134 #define basename_full_usage "\n\n" \
135 "Strip directory path and .SUFFIX from FILE\n"
136 #define basename_example_usage \
137 "$ basename /usr/local/bin/foo\n" \
139 "$ basename /usr/local/bin/\n" \
141 "$ basename /foo/bar.txt .txt\n" \
144 #define beep_trivial_usage \
145 "-f FREQ -l LEN -d DELAY -r COUNT -n"
146 #define beep_full_usage "\n\n" \
148 "\n -f Frequency in Hz" \
149 "\n -l Length in ms" \
150 "\n -d Delay in ms" \
151 "\n -r Repetitions" \
152 "\n -n Start new tone" \
154 #define blkid_trivial_usage \
156 #define blkid_full_usage "\n\n" \
157 "Print UUIDs of all filesystems"
159 #define brctl_trivial_usage \
160 "COMMAND [BRIDGE [INTERFACE]]"
161 #define brctl_full_usage "\n\n" \
162 "Manage ethernet bridges\n" \
164 IF_FEATURE_BRCTL_SHOW( \
165 "\n show Show a list of bridges" \
167 "\n addbr BRIDGE Create BRIDGE" \
168 "\n delbr BRIDGE Delete BRIDGE" \
169 "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \
170 "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \
171 IF_FEATURE_BRCTL_FANCY( \
172 "\n setageing BRIDGE TIME Set ageing time" \
173 "\n setfd BRIDGE TIME Set bridge forward delay" \
174 "\n sethello BRIDGE TIME Set hello time" \
175 "\n setmaxage BRIDGE TIME Set max message age" \
176 "\n setpathcost BRIDGE COST Set path cost" \
177 "\n setportprio BRIDGE PRIO Set port priority" \
178 "\n setbridgeprio BRIDGE PRIO Set bridge priority" \
179 "\n stp BRIDGE [1/yes/on|0/no/off] STP on/off" \
182 #define bzip2_trivial_usage \
183 "[OPTIONS] [FILE]..."
184 #define bzip2_full_usage "\n\n" \
185 "Compress FILEs (or stdin) with bzip2 algorithm\n" \
187 "\n -1..9 Compression level" \
189 "\n -c Write to stdout" \
192 #define busybox_notes_usage \
195 #define lzop_trivial_usage \
196 "[-cfvd123456789CF] [FILE]..."
197 #define lzop_full_usage "\n\n" \
199 "\n -1..9 Compression level" \
201 "\n -c Write to stdout" \
204 "\n -F Don't store or verify checksum" \
205 "\n -C Also write checksum of compressed block" \
207 #define lzopcat_trivial_usage \
209 #define lzopcat_full_usage "\n\n" \
211 "\n -F Don't store or verify checksum" \
213 #define unlzop_trivial_usage \
215 #define unlzop_full_usage "\n\n" \
217 "\n -c Write to stdout" \
220 "\n -F Don't store or verify checksum" \
222 #define unlzma_trivial_usage \
224 #define unlzma_full_usage "\n\n" \
225 "Decompress FILE (or stdin)\n" \
227 "\n -c Write to stdout" \
230 #define lzma_trivial_usage \
232 #define lzma_full_usage "\n\n" \
233 "Decompress FILE (or stdin)\n" \
236 "\n -c Write to stdout" \
239 #define lzcat_trivial_usage \
241 #define lzcat_full_usage "\n\n" \
242 "Decompress to stdout"
244 #define unxz_trivial_usage \
246 #define unxz_full_usage "\n\n" \
247 "Decompress FILE (or stdin)\n" \
249 "\n -c Write to stdout" \
252 #define xz_trivial_usage \
254 #define xz_full_usage "\n\n" \
255 "Decompress FILE (or stdin)\n" \
258 "\n -c Write to stdout" \
261 #define xzcat_trivial_usage \
263 #define xzcat_full_usage "\n\n" \
264 "Decompress to stdout"
266 #define cal_trivial_usage \
267 "[-jy] [[MONTH] YEAR]"
268 #define cal_full_usage "\n\n" \
269 "Display a calendar\n" \
271 "\n -j Use julian dates" \
272 "\n -y Display the entire year" \
274 #define cat_trivial_usage \
276 #define cat_full_usage "\n\n" \
277 "Concatenate FILEs and print them to stdout" \
279 #define cat_example_usage \
280 "$ cat /proc/uptime\n" \
283 #define catv_trivial_usage \
285 #define catv_full_usage "\n\n" \
286 "Display nonprinting characters as ^x or M-x\n" \
288 "\n -e End each line with $" \
289 "\n -t Show tabs as ^I" \
290 "\n -v Don't use ^x or M-x escapes" \
292 #define chat_trivial_usage \
293 "EXPECT [SEND [EXPECT [SEND...]]]"
294 #define chat_full_usage "\n\n" \
295 "Useful for interacting with a modem connected to stdin/stdout.\n" \
296 "A script consists of one or more \"expect-send\" pairs of strings,\n" \
297 "each pair is a pair of arguments. Example:\n" \
298 "chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \
300 #define chattr_trivial_usage \
301 "[-R] [-+=AacDdijsStTu] [-v VERSION] [FILE]..."
302 #define chattr_full_usage "\n\n" \
303 "Change file attributes on an ext2 fs\n" \
305 "\n - Remove attributes" \
306 "\n + Add attributes" \
307 "\n = Set attributes" \
309 "\n A Don't track atime" \
310 "\n a Append mode only" \
311 "\n c Enable compress" \
312 "\n D Write dir contents synchronously" \
313 "\n d Don't backup with dump" \
314 "\n i Cannot be modified (immutable)" \
315 "\n j Write all data to journal first" \
316 "\n s Zero disk storage when deleted" \
317 "\n S Write file contents synchronously" \
318 "\n t Disable tail-merging of partial blocks with other files" \
319 "\n u Allow file to be undeleted" \
322 "\n -v Set the file's version/generation number" \
324 #define chcon_trivial_usage \
325 "[OPTIONS] CONTEXT FILE..." \
326 "\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \
327 IF_FEATURE_CHCON_LONG_OPTIONS( \
328 "\n chcon [OPTIONS] --reference=RFILE FILE..." \
330 #define chcon_full_usage "\n\n" \
331 "Change the security context of each FILE to CONTEXT\n" \
332 IF_FEATURE_CHCON_LONG_OPTIONS( \
333 "\n -v,--verbose Verbose" \
334 "\n -c,--changes Report changes made" \
335 "\n -h,--no-dereference Affect symlinks instead of their targets" \
336 "\n -f,--silent,--quiet Suppress most error messages" \
337 "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
338 "\n -u,--user=USER Set user/role/type/range in the target" \
339 "\n -r,--role=ROLE security context" \
340 "\n -t,--type=TYPE" \
341 "\n -l,--range=RANGE" \
342 "\n -R,--recursive Recurse" \
344 IF_NOT_FEATURE_CHCON_LONG_OPTIONS( \
346 "\n -c Report changes made" \
347 "\n -h Affect symlinks instead of their targets" \
348 "\n -f Suppress most error messages" \
349 "\n -u USER Set user/role/type/range in the target security context" \
356 #define chmod_trivial_usage \
357 "[-R"IF_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
358 #define chmod_full_usage "\n\n" \
359 "Each MODE is one or more of the letters ugoa, one of the\n" \
360 "symbols +-= and one or more of the letters rwxst\n" \
364 "\n -c List changed files" \
365 "\n -v List all files" \
366 "\n -f Hide errors" \
368 #define chmod_example_usage \
369 "$ ls -l /tmp/foo\n" \
370 "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
371 "$ chmod u+x /tmp/foo\n" \
372 "$ ls -l /tmp/foo\n" \
373 "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
374 "$ chmod 444 /tmp/foo\n" \
375 "$ ls -l /tmp/foo\n" \
376 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
378 #define chgrp_trivial_usage \
379 "[-RhLHP"IF_DESKTOP("cvf")"]... GROUP FILE..."
380 #define chgrp_full_usage "\n\n" \
381 "Change the group membership of each FILE to GROUP\n" \
384 "\n -h Affect symlinks instead of symlink targets" \
385 "\n -L Traverse all symlinks to directories" \
386 "\n -H Traverse symlinks on command line only" \
387 "\n -P Don't traverse symlinks (default)" \
389 "\n -c List changed files" \
391 "\n -f Hide errors" \
393 #define chgrp_example_usage \
394 "$ ls -l /tmp/foo\n" \
395 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
396 "$ chgrp root /tmp/foo\n" \
397 "$ ls -l /tmp/foo\n" \
398 "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
400 #define chown_trivial_usage \
401 "[-RhLHP"IF_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
402 #define chown_full_usage "\n\n" \
403 "Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \
406 "\n -h Affect symlinks instead of symlink targets" \
407 "\n -L Traverse all symlinks to directories" \
408 "\n -H Traverse symlinks on command line only" \
409 "\n -P Don't traverse symlinks (default)" \
411 "\n -c List changed files" \
412 "\n -v List all files" \
413 "\n -f Hide errors" \
415 #define chown_example_usage \
416 "$ ls -l /tmp/foo\n" \
417 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
418 "$ chown root /tmp/foo\n" \
419 "$ ls -l /tmp/foo\n" \
420 "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
421 "$ chown root.root /tmp/foo\n" \
423 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
425 #define chpst_trivial_usage \
426 "[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \
427 " [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \
428 " [-p N] [-f BYTES] [-c BYTES] PROG ARGS"
429 #define chpst_full_usage "\n\n" \
430 "Change the process state, run PROG\n" \
432 "\n -u USER[:GRP] Set uid and gid" \
433 "\n -U USER[:GRP] Set $UID and $GID in environment" \
434 "\n -e DIR Set environment variables as specified by files" \
435 "\n in DIR: file=1st_line_of_file" \
436 "\n -/ DIR Chroot to DIR" \
437 "\n -n NICE Add NICE to nice value" \
438 "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \
439 "\n -d BYTES Limit data segment" \
440 "\n -o N Limit number of open files per process" \
441 "\n -p N Limit number of processes per uid" \
442 "\n -f BYTES Limit output file sizes" \
443 "\n -c BYTES Limit core file size" \
445 "\n -P Create new process group" \
446 "\n -0 Close stdin" \
447 "\n -1 Close stdout" \
448 "\n -2 Close stderr" \
450 #define setuidgid_trivial_usage \
452 #define setuidgid_full_usage "\n\n" \
453 "Set uid and gid to USER's uid and gid, drop supplementary group ids,\n" \
455 #define envuidgid_trivial_usage \
457 #define envuidgid_full_usage "\n\n" \
458 "Set $UID to USER's uid and $GID to USER's gid, run PROG"
459 #define envdir_trivial_usage \
461 #define envdir_full_usage "\n\n" \
462 "Set various environment variables as specified by files\n" \
463 "in the directory DIR, run PROG"
464 #define softlimit_trivial_usage \
465 "[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \
466 " [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \
468 #define softlimit_full_usage "\n\n" \
469 "Set soft resource limits, then run PROG\n" \
471 "\n -a BYTES Limit total size of all segments" \
472 "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \
473 "\n -d BYTES Limit data segment" \
474 "\n -s BYTES Limit stack segment" \
475 "\n -l BYTES Limit locked memory size" \
476 "\n -o N Limit number of open files per process" \
477 "\n -p N Limit number of processes per uid" \
478 "\nOptions controlling file sizes:" \
479 "\n -f BYTES Limit output file sizes" \
480 "\n -c BYTES Limit core file size" \
481 "\nEfficiency opts:" \
482 "\n -r BYTES Limit resident set size" \
483 "\n -t N Limit CPU time, process receives" \
484 "\n a SIGXCPU after N seconds" \
486 #define chroot_trivial_usage \
487 "NEWROOT [PROG ARGS]"
488 #define chroot_full_usage "\n\n" \
489 "Run PROG with root directory set to NEWROOT"
490 #define chroot_example_usage \
491 "$ ls -l /bin/ls\n" \
492 "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
493 "# mount /dev/hdc1 /mnt -t minix\n" \
495 "# ls -l /bin/ls\n" \
496 "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
498 #define chvt_trivial_usage \
500 #define chvt_full_usage "\n\n" \
501 "Change the foreground virtual terminal to /dev/ttyN"
503 #define cksum_trivial_usage \
505 #define cksum_full_usage "\n\n" \
506 "Calculate the CRC32 checksums of FILES"
508 #define clear_trivial_usage \
510 #define clear_full_usage "\n\n" \
513 #define cmp_trivial_usage \
514 "[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]]") "]"
515 #define cmp_full_usage "\n\n" \
516 "Compare FILE1 with FILE2 (or stdin)\n" \
518 "\n -l Write the byte numbers (decimal) and values (octal)" \
519 "\n for all differing bytes" \
522 #define comm_trivial_usage \
524 #define comm_full_usage "\n\n" \
525 "Compare FILE1 with FILE2\n" \
527 "\n -1 Suppress lines unique to FILE1" \
528 "\n -2 Suppress lines unique to FILE2" \
529 "\n -3 Suppress lines common to both files" \
531 #define bbconfig_trivial_usage \
533 #define bbconfig_full_usage "\n\n" \
534 "Print the config file used by busybox build"
536 #define chrt_trivial_usage \
537 "[-prfom] [PRIO] [PID | PROG ARGS]"
538 #define chrt_full_usage "\n\n" \
539 "Change scheduling priority and class for a process\n" \
541 "\n -p Operate on PID" \
542 "\n -r Set SCHED_RR class" \
543 "\n -f Set SCHED_FIFO class" \
544 "\n -o Set SCHED_OTHER class" \
545 "\n -m Show min/max priorities" \
547 #define chrt_example_usage \
548 "$ chrt -r 4 sleep 900; x=$!\n" \
549 "$ chrt -f -p 3 $x\n" \
550 "You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
552 #define nice_trivial_usage \
553 "[-n ADJUST] [PROG ARGS]"
554 #define nice_full_usage "\n\n" \
555 "Change scheduling priority, run PROG\n" \
557 "\n -n ADJUST Adjust priority by ADJUST" \
559 #define renice_trivial_usage \
560 "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]"
561 #define renice_full_usage "\n\n" \
562 "Change scheduling priority for a running process\n" \
564 "\n -n Adjust current nice value (smaller is faster)" \
565 "\n -p Process id(s) (default)" \
566 "\n -g Process group id(s)" \
567 "\n -u Process user name(s) and/or id(s)" \
569 #define ionice_trivial_usage \
570 "[-c 1-3] [-n 0-7] [-p PID] [PROG]"
571 #define ionice_full_usage "\n\n" \
572 "Change I/O priority and class\n" \
574 "\n -c Class. 1:realtime 2:best-effort 3:idle" \
577 #define cp_trivial_usage \
578 "[OPTIONS] SOURCE DEST"
579 #define cp_full_usage "\n\n" \
580 "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \
582 "\n -a Same as -dpR" \
584 "\n -c Preserve security context" \
587 "\n -d,-P Preserve symlinks (default if -R)" \
588 "\n -L Follow all symlinks" \
589 "\n -H Follow symlinks on command line" \
590 "\n -p Preserve file attributes if possible" \
592 "\n -i Prompt before overwrite" \
593 "\n -l,-s Create (sym)links" \
595 #define crond_trivial_usage \
596 "-fbS -l N " IF_FEATURE_CROND_D("-d N ") "-L LOGFILE -c DIR"
597 #define crond_full_usage "\n\n" \
599 "\n -b Background (default)" \
600 "\n -S Log to syslog (default)" \
601 "\n -l Set log level. 0 is the most verbose, default 8" \
602 IF_FEATURE_CROND_D( \
603 "\n -d Set log level, log to stderr" \
605 "\n -L Log to file" \
606 "\n -c Working dir" \
608 #define crontab_trivial_usage \
609 "[-c DIR] [-u USER] [-ler]|[FILE]"
610 #define crontab_full_usage "\n\n" \
611 " -c Crontab directory" \
613 "\n -l List crontab" \
614 "\n -e Edit crontab" \
615 "\n -r Delete crontab" \
616 "\n FILE Replace crontab by FILE ('-': stdin)" \
618 #define cryptpw_trivial_usage \
619 "[OPTIONS] [PASSWORD] [SALT]"
620 /* We do support -s, we just don't mention it */
621 #define cryptpw_full_usage "\n\n" \
622 "Crypt the PASSWORD using crypt(3)\n" \
625 "\n -P,--password-fd=N Read password from fd N" \
626 /* "\n -s,--stdin Use stdin; like -P0" */ \
627 "\n -m,--method=TYPE Encryption method TYPE" \
628 "\n -S,--salt=SALT" \
631 "\n -P N Read password from fd N" \
632 /* "\n -s Use stdin; like -P0" */ \
633 "\n -m TYPE Encryption method TYPE" \
637 /* mkpasswd is an alias to cryptpw */
639 #define mkpasswd_trivial_usage \
640 "[OPTIONS] [PASSWORD] [SALT]"
641 /* We do support -s, we just don't mention it */
642 #define mkpasswd_full_usage "\n\n" \
643 "Crypt the PASSWORD using crypt(3)\n" \
646 "\n -P,--password-fd=N Read password from fd N" \
647 /* "\n -s,--stdin Use stdin; like -P0" */ \
648 "\n -m,--method=TYPE Encryption method TYPE" \
649 "\n -S,--salt=SALT" \
652 "\n -P N Read password from fd N" \
653 /* "\n -s Use stdin; like -P0" */ \
654 "\n -m TYPE Encryption method TYPE" \
658 #define cut_trivial_usage \
659 "[OPTIONS] [FILE]..."
660 #define cut_full_usage "\n\n" \
661 "Print selected fields from each input FILE to stdout\n" \
663 "\n -b LIST Output only bytes from LIST" \
664 "\n -c LIST Output only characters from LIST" \
665 "\n -d CHAR Use CHAR instead of tab as the field delimiter" \
666 "\n -s Output only the lines containing delimiter" \
667 "\n -f N Print only these fields" \
670 #define cut_example_usage \
671 "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
673 "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
676 #define dd_trivial_usage \
677 "[if=FILE] [of=FILE] " IF_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
678 " [seek=N]" IF_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync|fsync]")
679 #define dd_full_usage "\n\n" \
680 "Copy a file with converting and formatting\n" \
682 "\n if=FILE Read from FILE instead of stdin" \
683 "\n of=FILE Write to FILE instead of stdout" \
684 "\n bs=N Read and write N bytes at a time" \
685 IF_FEATURE_DD_IBS_OBS( \
686 "\n ibs=N Read N bytes at a time" \
688 IF_FEATURE_DD_IBS_OBS( \
689 "\n obs=N Write N bytes at a time" \
691 "\n count=N Copy only N input blocks" \
692 "\n skip=N Skip N input blocks" \
693 "\n seek=N Skip N output blocks" \
694 IF_FEATURE_DD_IBS_OBS( \
695 "\n conv=notrunc Don't truncate output file" \
696 "\n conv=noerror Continue after read errors" \
697 "\n conv=sync Pad blocks with zeros" \
698 "\n conv=fsync Physically write data out before finishing" \
701 "\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \
702 "\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \
704 #define dd_example_usage \
705 "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
709 #define deallocvt_trivial_usage \
711 #define deallocvt_full_usage "\n\n" \
712 "Deallocate unused virtual terminal /dev/ttyN"
714 #define delgroup_trivial_usage \
715 IF_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
716 #define delgroup_full_usage "\n\n" \
717 "Delete group GROUP from the system" \
718 IF_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
720 #define deluser_trivial_usage \
722 #define deluser_full_usage "\n\n" \
723 "Delete USER from the system"
725 #define devmem_trivial_usage \
726 "ADDRESS [WIDTH [VALUE]]"
728 #define devmem_full_usage "\n\n" \
729 "Read/write from physical address\n" \
730 "\n ADDRESS Address to act upon" \
731 "\n WIDTH Width (8/16/...)" \
732 "\n VALUE Data to be written" \
734 #define devfsd_trivial_usage \
735 "mntpnt [-v]" IF_DEVFSD_FG_NP("[-fg][-np]")
736 #define devfsd_full_usage "\n\n" \
737 "Manage devfs permissions and old device name symlinks\n" \
739 "\n mntpnt The mount point where devfs is mounted" \
740 "\n -v Print the protocol version numbers for devfsd" \
741 "\n and the kernel-side protocol version and exit" \
743 "\n -fg Run in foreground" \
744 "\n -np Exit after parsing the configuration file" \
745 "\n and processing synthetic REGISTER events," \
746 "\n don't poll for events" \
749 #define df_trivial_usage \
751 IF_FEATURE_HUMAN_READABLE("mh") \
752 IF_FEATURE_DF_FANCY("ai] [-B SIZE") \
754 #define df_full_usage "\n\n" \
755 "Print filesystem usage statistics\n" \
757 "\n -P POSIX output format" \
758 "\n -k 1024-byte blocks (default)" \
759 IF_FEATURE_HUMAN_READABLE( \
760 "\n -m 1M-byte blocks" \
761 "\n -h Human readable (e.g. 1K 243M 2G)" \
763 IF_FEATURE_DF_FANCY( \
764 "\n -a Show all filesystems" \
766 "\n -B SIZE Blocksize" \
769 #define df_example_usage \
771 "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
772 "/dev/sda3 8690864 8553540 137324 98% /\n" \
773 "/dev/sda1 64216 36364 27852 57% /boot\n" \
775 "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
776 "/dev/sda3 8690864 8553540 137324 98% /\n" \
777 "$ POSIXLY_CORRECT=sure df /dev/sda3\n" \
778 "Filesystem 512B-blocks Used Available Use% Mounted on\n" \
779 "/dev/sda3 17381728 17107080 274648 98% /\n" \
780 "$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" \
781 "Filesystem 512-blocks Used Available Capacity Mounted on\n" \
782 "/dev/sda3 17381728 17107080 274648 98% /\n"
784 #define dhcprelay_trivial_usage \
785 "CLIENT_IFACE[,CLIENT_IFACE2]... SERVER_IFACE [SERVER_IP]"
786 #define dhcprelay_full_usage "\n\n" \
787 "Relay DHCP requests between clients and server" \
789 #define diff_trivial_usage \
790 "[-abBdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
791 #define diff_full_usage "\n\n" \
792 "Compare files line by line and output the differences between them.\n" \
793 "This implementation supports unified diffs only.\n" \
795 "\n -a Treat all files as text" \
796 "\n -b Ignore changes in the amount of whitespace" \
797 "\n -B Ignore changes whose lines are all blank" \
798 "\n -d Try hard to find a smaller set of changes" \
799 "\n -i Ignore case differences" \
800 "\n -L Use LABEL instead of the filename in the unified header" \
801 "\n -N Treat absent files as empty" \
802 "\n -q Output only whether files differ" \
804 "\n -S Start with FILE when comparing directories" \
805 "\n -T Make tabs line up by prefixing a tab when necessary" \
806 "\n -s Report when two files are the same" \
807 "\n -t Expand tabs to spaces in output" \
808 "\n -U Output LINES lines of context" \
809 "\n -w Ignore all whitespace" \
811 #define dirname_trivial_usage \
813 #define dirname_full_usage "\n\n" \
814 "Strip non-directory suffix from FILENAME"
815 #define dirname_example_usage \
816 "$ dirname /tmp/foo\n" \
818 "$ dirname /tmp/foo/\n" \
821 #define dmesg_trivial_usage \
822 "[-c] [-n LEVEL] [-s SIZE]"
823 #define dmesg_full_usage "\n\n" \
824 "Print or control the kernel ring buffer\n" \
826 "\n -c Clear ring buffer after printing" \
827 "\n -n LEVEL Set console logging level" \
828 "\n -s SIZE Buffer size" \
830 #define dnsd_trivial_usage \
831 "[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]"
832 #define dnsd_full_usage "\n\n" \
833 "Small static DNS server daemon\n" \
835 "\n -c FILE Config file" \
837 "\n -p PORT Listen on PORT" \
838 "\n -i ADDR Listen on ADDR" \
841 "\n -s Send successful replies only. Use this if you want" \
842 "\n to use /etc/resolv.conf with two nameserver lines:" \
843 "\n nameserver DNSD_SERVER" \
844 "\n nameserver NORNAL_DNS_SERVER" \
846 #define dos2unix_trivial_usage \
848 #define dos2unix_full_usage "\n\n" \
849 "Convert FILE in-place from DOS to Unix format.\n" \
850 "When no file is given, use stdin/stdout.\n" \
855 #define unix2dos_trivial_usage \
857 #define unix2dos_full_usage "\n\n" \
858 "Convert FILE in-place from Unix to DOS format.\n" \
859 "When no file is given, use stdin/stdout.\n" \
864 #define dpkg_trivial_usage \
865 "[-ilCPru] [-F OPT] PACKAGE"
866 #define dpkg_full_usage "\n\n" \
867 "Install, remove and manage Debian packages\n" \
870 "\n -i,--install Install the package" \
871 "\n -l,--list List of installed packages" \
872 "\n --configure Configure an unpackaged package" \
873 "\n -P,--purge Purge all files of a package" \
874 "\n -r,--remove Remove all but the configuration files for a package" \
875 "\n --unpack Unpack a package, but don't configure it" \
876 "\n --force-depends Ignore dependency problems" \
877 "\n --force-confnew Overwrite existing config files when installing" \
878 "\n --force-confold Keep old config files when installing" \
881 "\n -i Install the package" \
882 "\n -l List of installed packages" \
883 "\n -C Configure an unpackaged package" \
884 "\n -P Purge all files of a package" \
885 "\n -r Remove all but the configuration files for a package" \
886 "\n -u Unpack a package, but don't configure it" \
887 "\n -F depends Ignore dependency problems" \
888 "\n -F confnew Overwrite existing config files when installing" \
889 "\n -F confold Keep old config files when installing" \
892 #define dpkg_deb_trivial_usage \
893 "[-cefxX] FILE [argument]"
894 #define dpkg_deb_full_usage "\n\n" \
895 "Perform actions on Debian packages (.debs)\n" \
897 "\n -c List contents of filesystem tree" \
898 "\n -e Extract control files to [argument] directory" \
899 "\n -f Display control field name starting with [argument]" \
900 "\n -x Extract packages filesystem tree to directory" \
901 "\n -X Verbose extract" \
903 #define dpkg_deb_example_usage \
904 "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
906 #define du_trivial_usage \
907 "[-aHLdclsx" IF_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
908 #define du_full_usage "\n\n" \
909 "Summarize disk space used for each FILE and/or directory.\n" \
910 "Disk space is printed in units of " \
911 IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
912 IF_NOT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
915 "\n -a Show file sizes too" \
916 "\n -L Follow all symlinks" \
917 "\n -H Follow symlinks on command line" \
918 "\n -d N Limit output to directories (and files with -a) of depth < N" \
919 "\n -c Show grand total" \
920 "\n -l Count sizes many times if hard linked" \
921 "\n -s Display only a total for each argument" \
922 "\n -x Skip directories on different filesystems" \
923 IF_FEATURE_HUMAN_READABLE( \
924 "\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \
925 "\n -m Sizes in megabytes" \
927 "\n -k Sizes in kilobytes" \
928 IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \
930 #define du_example_usage \
933 "12 ./kernel-patches/CVS\n" \
934 "80 ./kernel-patches\n" \
937 "12 ./scripts/CVS\n" \
943 #define dumpkmap_trivial_usage \
945 #define dumpkmap_full_usage "\n\n" \
946 "Print a binary keyboard translation table to stdout"
947 #define dumpkmap_example_usage \
948 "$ dumpkmap > keymap\n"
950 #define dumpleases_trivial_usage \
951 "[-r|-a] [-f LEASEFILE]"
952 #define dumpleases_full_usage "\n\n" \
953 "Display DHCP leases granted by udhcpd\n" \
956 "\n -f,--file=FILE Lease file" \
957 "\n -r,--remaining Show remaining time" \
958 "\n -a,--absolute Show expiration time" \
961 "\n -f FILE Lease file" \
962 "\n -r Show remaining time" \
963 "\n -a Show expiration time" \
967 #define e2fsck_trivial_usage \
968 "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
969 "[-I inode_buffer_blocks] [-P process_inode_size] " \
970 "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
971 "[-E extended-options] device"
972 #define e2fsck_full_usage "\n\n" \
973 "Check ext2/ext3 file system\n" \
975 "\n -p Automatic repair (no questions)" \
976 "\n -n Make no changes to the filesystem" \
977 "\n -y Assume 'yes' to all questions" \
978 "\n -c Check for bad blocks and add them to the badblock list" \
979 "\n -f Force checking even if filesystem is marked clean" \
981 "\n -b superblock Use alternative superblock" \
982 "\n -B blocksize Force blocksize when looking for superblock" \
983 "\n -j journal Set location of the external journal" \
984 "\n -l file Add to badblocks list" \
985 "\n -L file Set badblocks list" \
988 #define echo_trivial_usage \
989 IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG]..."
990 #define echo_full_usage "\n\n" \
991 "Print the specified ARGs to stdout" \
992 IF_FEATURE_FANCY_ECHO( "\n" \
994 "\n -n Suppress trailing newline" \
995 "\n -e Interpret backslash escapes (i.e., \\t=tab)" \
996 "\n -E Don't interpret backslash escapes (default)" \
998 #define echo_example_usage \
999 "$ echo \"Erik is cool\"\n" \
1001 IF_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
1005 "$ echo \"Erik\\nis\\ncool\"\n" \
1006 "Erik\\nis\\ncool\n")
1008 #define eject_trivial_usage \
1009 "[-t] [-T] [DEVICE]"
1010 #define eject_full_usage "\n\n" \
1011 "Eject DEVICE or default /dev/cdrom\n" \
1013 IF_FEATURE_EJECT_SCSI( \
1014 "\n -s SCSI device" \
1016 "\n -t Close tray" \
1017 "\n -T Open/close tray (toggle)" \
1019 #define ed_trivial_usage ""
1020 #define ed_full_usage ""
1022 #define env_trivial_usage \
1023 "[-iu] [-] [name=value]... [PROG ARGS]"
1024 #define env_full_usage "\n\n" \
1025 "Print the current environment or run PROG after setting up\n" \
1026 "the specified environment\n" \
1028 "\n -, -i Start with an empty environment" \
1029 "\n -u Remove variable from the environment" \
1031 #define ether_wake_trivial_usage \
1032 "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
1033 #define ether_wake_full_usage "\n\n" \
1034 "Send a magic packet to wake up sleeping machines.\n" \
1035 "MAC must be a station address (00:11:22:33:44:55) or\n" \
1036 "a hostname with a known 'ethers' entry.\n" \
1038 "\n -b Send wake-up packet to the broadcast address" \
1039 "\n -i iface Interface to use (default eth0)" \
1040 "\n -p pass Append four or six byte password PW to the packet" \
1042 #define expand_trivial_usage \
1043 "[-i] [-t N] [FILE]..."
1044 #define expand_full_usage "\n\n" \
1045 "Convert tabs to spaces, writing to stdout\n" \
1047 IF_FEATURE_EXPAND_LONG_OPTIONS( \
1048 "\n -i,--initial Don't convert tabs after non blanks" \
1049 "\n -t,--tabs=N Tabstops every N chars" \
1051 IF_NOT_FEATURE_EXPAND_LONG_OPTIONS( \
1052 "\n -i Don't convert tabs after non blanks" \
1053 "\n -t Tabstops every N chars" \
1056 #define expr_trivial_usage \
1058 #define expr_full_usage "\n\n" \
1059 "Print the value of EXPRESSION to stdout\n" \
1061 "EXPRESSION may be:\n" \
1062 " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
1063 " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
1064 " ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \
1070 " ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \
1075 " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
1076 " match STRING REGEXP Same as STRING : REGEXP\n" \
1077 " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
1078 " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
1079 " length STRING Length of STRING\n" \
1080 " quote TOKEN Interpret TOKEN as a string, even if\n" \
1081 " it is a keyword like 'match' or an\n" \
1082 " operator like '/'\n" \
1083 " (EXPRESSION) Value of EXPRESSION\n" \
1085 "Beware that many operators need to be escaped or quoted for shells.\n" \
1086 "Comparisons are arithmetic if both ARGs are numbers, else\n" \
1087 "lexicographical. Pattern matches return the string matched between\n" \
1088 "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
1089 "of characters matched or 0."
1091 #define fakeidentd_trivial_usage \
1092 "[-fiw] [-b ADDR] [STRING]"
1093 #define fakeidentd_full_usage "\n\n" \
1094 "Provide fake ident (auth) service\n" \
1096 "\n -f Run in foreground" \
1097 "\n -i Inetd mode" \
1098 "\n -w Inetd 'wait' mode" \
1099 "\n -b ADDR Bind to specified address" \
1100 "\n STRING Ident answer string (default: nobody)" \
1102 #define false_trivial_usage \
1104 #define false_full_usage "\n\n" \
1105 "Return an exit code of FALSE (1)"
1107 #define false_example_usage \
1112 #define fbsplash_trivial_usage \
1113 "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
1114 #define fbsplash_full_usage "\n\n" \
1117 "\n -c Hide cursor" \
1118 "\n -d Framebuffer device (default /dev/fb0)" \
1119 "\n -i Config file (var=value):" \
1120 "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
1121 "\n BAR_R,BAR_G,BAR_B" \
1122 "\n -f Control pipe (else exit after drawing image)" \
1123 "\n commands: 'NN' (% for progress bar) or 'exit'" \
1125 #define fbset_trivial_usage \
1127 #define fbset_full_usage "\n\n" \
1128 "Show and modify frame buffer settings"
1130 #define fbset_example_usage \
1132 "mode \"1024x768-76\"\n" \
1133 " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
1134 " geometry 1024 768 1024 768 16\n" \
1135 " timings 12714 128 32 16 4 128 4\n" \
1137 " rgba 5/11,6/5,5/0,0/0\n" \
1140 #define fdflush_trivial_usage \
1142 #define fdflush_full_usage "\n\n" \
1143 "Force floppy disk drive to detect disk change"
1145 #define fdformat_trivial_usage \
1147 #define fdformat_full_usage "\n\n" \
1148 "Format floppy disk\n" \
1150 "\n -n Don't verify after format" \
1152 /* Looks like someone forgot to add this to config system */
1153 #ifndef ENABLE_FEATURE_FDISK_BLKSIZE
1154 # define ENABLE_FEATURE_FDISK_BLKSIZE 0
1155 # define IF_FEATURE_FDISK_BLKSIZE(a)
1158 #define fdisk_trivial_usage \
1159 "[-ul" IF_FEATURE_FDISK_BLKSIZE("s") "] " \
1160 "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
1161 #define fdisk_full_usage "\n\n" \
1162 "Change partition table\n" \
1164 "\n -u Start and End are in sectors (instead of cylinders)" \
1165 "\n -l Show partition table for each DISK, then exit" \
1166 IF_FEATURE_FDISK_BLKSIZE( \
1167 "\n -s Show partition sizes in kb for each DISK, then exit" \
1169 "\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
1170 "\n -C CYLINDERS Set number of cylinders/heads/sectors" \
1174 #define fgconsole_trivial_usage \
1176 #define fgconsole_full_usage "\n\n" \
1177 "Get active console"
1179 #define findfs_trivial_usage \
1180 "LABEL=label or UUID=uuid"
1181 #define findfs_full_usage "\n\n" \
1182 "Find a filesystem device based on a label or UUID"
1183 #define findfs_example_usage \
1184 "$ findfs LABEL=MyDevice"
1186 #define flash_lock_trivial_usage \
1187 "MTD_DEVICE OFFSET SECTORS"
1188 #define flash_lock_full_usage "\n\n" \
1189 "Lock part or all of an MTD device. If SECTORS is -1, then all sectors\n" \
1190 "will be locked, regardless of the value of OFFSET"
1192 #define flash_unlock_trivial_usage \
1194 #define flash_unlock_full_usage "\n\n" \
1195 "Unlock an MTD device"
1197 #define flash_eraseall_trivial_usage \
1199 #define flash_eraseall_full_usage "\n\n" \
1200 "Erase an MTD device\n" \
1202 "\n -j Format the device for jffs2" \
1203 "\n -q Don't display progress messages" \
1205 #define flashcp_trivial_usage \
1206 "-v FILE MTD_DEVICE"
1207 #define flashcp_full_usage "\n\n" \
1208 "Copy an image to MTD device\n" \
1212 #define flock_trivial_usage \
1213 "[-sxun] FD|{FILE [-c] PROG ARGS}"
1214 #define flock_full_usage "\n\n" \
1215 "[Un]lock file descriptor, or lock FILE, run PROG\n" \
1217 "\n -s Shared lock" \
1218 "\n -x Exclusive lock (default)" \
1220 "\n -n Fail rather than wait" \
1222 #define fold_trivial_usage \
1223 "[-bs] [-w WIDTH] [FILE]..."
1224 #define fold_full_usage "\n\n" \
1225 "Wrap input lines in each FILE (or stdin), writing to stdout\n" \
1227 "\n -b Count bytes rather than columns" \
1228 "\n -s Break at spaces" \
1229 "\n -w Use WIDTH columns instead of 80" \
1231 #define free_trivial_usage \
1232 "" IF_DESKTOP("[-b/k/m/g]")
1233 #define free_full_usage "\n\n" \
1234 "Display the amount of free and used system memory"
1235 #define free_example_usage \
1237 " total used free shared buffers\n" \
1238 " Mem: 257628 248724 8904 59644 93124\n" \
1239 " Swap: 128516 8404 120112\n" \
1240 "Total: 386144 257128 129016\n" \
1242 #define freeramdisk_trivial_usage \
1244 #define freeramdisk_full_usage "\n\n" \
1245 "Free all memory used by the specified ramdisk"
1246 #define freeramdisk_example_usage \
1247 "$ freeramdisk /dev/ram2\n"
1249 #define fsck_trivial_usage \
1250 "[-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]..."
1251 #define fsck_full_usage "\n\n" \
1252 "Check and repair filesystems\n" \
1254 "\n -A Walk /etc/fstab and check all filesystems" \
1255 "\n -N Don't execute, just show what would be done" \
1256 "\n -P With -A, check filesystems in parallel" \
1257 "\n -R With -A, skip the root filesystem" \
1258 "\n -T Don't show title on startup" \
1260 "\n -C n Write status information to specified filedescriptor" \
1261 "\n -t TYPE List of filesystem types to check" \
1263 #define fsck_minix_trivial_usage \
1264 "[-larvsmf] BLOCKDEV"
1265 #define fsck_minix_full_usage "\n\n" \
1266 "Check MINIX filesystem\n" \
1268 "\n -l List all filenames" \
1269 "\n -r Perform interactive repairs" \
1270 "\n -a Perform automatic repairs" \
1272 "\n -s Output superblock information" \
1273 "\n -m Show \"mode not cleared\" warnings" \
1274 "\n -f Force file system check" \
1276 #define ftpd_trivial_usage \
1277 "[-wvS] [-t N] [-T N] [DIR]"
1278 #define ftpd_full_usage "\n\n" \
1279 "Anonymous FTP server\n" \
1281 "ftpd should be used as an inetd service.\n" \
1282 "ftpd's line for inetd.conf:\n" \
1283 " 21 stream tcp nowait root ftpd ftpd /files/to/serve\n" \
1284 "It also can be ran from tcpsvd:\n" \
1285 " tcpsvd -vE 0.0.0.0 21 ftpd /files/to/serve\n" \
1287 "\n -w Allow upload" \
1288 "\n -v Log to stderr" \
1289 "\n -S Log to syslog" \
1290 "\n -t,-T Idle and absolute timeouts" \
1291 "\n DIR Change root to this directory" \
1293 #define ftpget_trivial_usage \
1294 "[OPTIONS] HOST [LOCAL_FILE] REMOTE_FILE"
1295 #define ftpget_full_usage "\n\n" \
1296 "Retrieve a remote file via FTP\n" \
1298 IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1299 "\n -c,--continue Continue previous transfer" \
1300 "\n -v,--verbose Verbose" \
1301 "\n -u,--username Username" \
1302 "\n -p,--password Password" \
1303 "\n -P,--port Port number" \
1305 IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1306 "\n -c Continue previous transfer" \
1310 "\n -P Port number" \
1313 #define ftpput_trivial_usage \
1314 "[OPTIONS] HOST [REMOTE_FILE] LOCAL_FILE"
1315 #define ftpput_full_usage "\n\n" \
1316 "Store a local file on a remote machine via FTP\n" \
1318 IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1319 "\n -v,--verbose Verbose" \
1320 "\n -u,--username Username" \
1321 "\n -p,--password Password" \
1322 "\n -P,--port Port number" \
1324 IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1328 "\n -P Port number" \
1331 #define fuser_trivial_usage \
1332 "[OPTIONS] FILE or PORT/PROTO"
1333 #define fuser_full_usage "\n\n" \
1334 "Find processes which use FILEs or PORTs\n" \
1336 "\n -m Find processes which use same fs as FILEs" \
1337 "\n -4,-6 Search only IPv4/IPv6 space" \
1338 "\n -s Don't display PIDs" \
1339 "\n -k Kill found processes" \
1340 "\n -SIGNAL Signal to send (default: KILL)" \
1342 #define getenforce_trivial_usage NOUSAGE_STR
1343 #define getenforce_full_usage ""
1345 #define getopt_trivial_usage \
1347 #define getopt_full_usage "\n\n" \
1350 "\n -a,--alternative Allow long options starting with single -" \
1351 "\n -l,--longoptions=longopts Long options to be recognized" \
1352 "\n -n,--name=progname The name under which errors are reported" \
1353 "\n -o,--options=optstring Short options to be recognized" \
1354 "\n -q,--quiet Disable error reporting by getopt(3)" \
1355 "\n -Q,--quiet-output No normal output" \
1356 "\n -s,--shell=shell Set shell quoting conventions" \
1357 "\n -T,--test Test for getopt(1) version" \
1358 "\n -u,--unquoted Don't quote the output" \
1361 "\n -a Allow long options starting with single -" \
1362 "\n -l longopts Long options to be recognized" \
1363 "\n -n progname The name under which errors are reported" \
1364 "\n -o optstring Short options to be recognized" \
1365 "\n -q Disable error reporting by getopt(3)" \
1366 "\n -Q No normal output" \
1367 "\n -s shell Set shell quoting conventions" \
1368 "\n -T Test for getopt(1) version" \
1369 "\n -u Don't quote the output" \
1371 #define getopt_example_usage \
1372 "$ cat getopt.test\n" \
1374 "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
1375 " -n 'example.busybox' -- \"$@\"`\n" \
1376 "if [ $? != 0 ]; then exit 1; fi\n" \
1377 "eval set -- \"$GETOPT\"\n" \
1378 "while true; do\n" \
1380 " -a|--a-long) echo \"Option a\"; shift;;\n" \
1381 " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \
1383 " case \"$2\" in\n" \
1384 " \"\") echo \"Option c, no argument\"; shift 2;;\n" \
1385 " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \
1387 " --) shift; break;;\n" \
1388 " *) echo \"Internal error!\"; exit 1;;\n" \
1392 #define getsebool_trivial_usage \
1393 "-a or getsebool boolean..."
1394 #define getsebool_full_usage "\n\n" \
1395 " -a Show all selinux booleans"
1397 #define getty_trivial_usage \
1398 "[OPTIONS] BAUD_RATE TTY [TERMTYPE]"
1399 #define getty_full_usage "\n\n" \
1400 "Open a tty, prompt for a login name, then invoke /bin/login\n" \
1402 "\n -h Enable hardware (RTS/CTS) flow control" \
1403 "\n -i Don't display /etc/issue before running login" \
1404 "\n -L Local line, don't do carrier detect" \
1405 "\n -m Get baud rate from modem's CONNECT status message" \
1406 "\n -w Wait for a CR or LF before sending /etc/issue" \
1407 "\n -n Don't prompt the user for a login name" \
1408 "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
1409 "\n -l LOGIN Invoke LOGIN instead of /bin/login" \
1410 "\n -t SEC Terminate after SEC if no username is read" \
1411 "\n -I INITSTR Send INITSTR before anything else" \
1412 "\n -H HOST Log HOST into the utmp file as the hostname" \
1414 #define gunzip_trivial_usage \
1416 #define gunzip_full_usage "\n\n" \
1417 "Decompress FILEs (or stdin)\n" \
1419 "\n -c Write to stdout" \
1421 "\n -t Test file integrity" \
1423 #define gunzip_example_usage \
1424 "$ ls -la /tmp/BusyBox*\n" \
1425 "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
1426 "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
1427 "$ ls -la /tmp/BusyBox*\n" \
1428 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
1430 #define gzip_trivial_usage \
1432 #define gzip_full_usage "\n\n" \
1433 "Compress FILEs (or stdin)\n" \
1435 "\n -d Decompress" \
1436 "\n -c Write to stdout" \
1439 #define gzip_example_usage \
1440 "$ ls -la /tmp/busybox*\n" \
1441 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
1442 "$ gzip /tmp/busybox.tar\n" \
1443 "$ ls -la /tmp/busybox*\n" \
1444 "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
1446 #define hdparm_trivial_usage \
1447 "[OPTIONS] [DEVICE]"
1448 #define hdparm_full_usage "\n\n" \
1450 "\n -a Get/set fs readahead" \
1451 "\n -A Set drive read-lookahead flag (0/1)" \
1452 "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \
1453 "\n -B Set Advanced Power Management setting (1-255)" \
1454 "\n -c Get/set IDE 32-bit IO setting" \
1455 "\n -C Check IDE power mode status" \
1456 IF_FEATURE_HDPARM_HDIO_GETSET_DMA( \
1457 "\n -d Get/set using_dma flag") \
1458 "\n -D Enable/disable drive defect-mgmt" \
1459 "\n -f Flush buffer cache for device on exit" \
1460 "\n -g Display drive geometry" \
1461 "\n -h Display terse usage information" \
1462 IF_FEATURE_HDPARM_GET_IDENTITY( \
1463 "\n -i Display drive identification") \
1464 IF_FEATURE_HDPARM_GET_IDENTITY( \
1465 "\n -I Detailed/current information directly from drive") \
1466 "\n -k Get/set keep_settings_over_reset flag (0/1)" \
1467 "\n -K Set drive keep_features_over_reset flag (0/1)" \
1468 "\n -L Set drive doorlock (0/1) (removable harddisks only)" \
1469 "\n -m Get/set multiple sector count" \
1470 "\n -n Get/set ignore-write-errors flag (0/1)" \
1471 "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \
1472 "\n -P Set drive prefetch count" \
1473 /* "\n -q Change next setting quietly" - not supported ib bbox */ \
1474 "\n -Q Get/set DMA tagged-queuing depth (if supported)" \
1475 "\n -r Get/set readonly flag (DANGEROUS to set)" \
1476 IF_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
1477 "\n -R Register an IDE interface (DANGEROUS)") \
1478 "\n -S Set standby (spindown) timeout" \
1479 "\n -t Perform device read timings" \
1480 "\n -T Perform cache read timings" \
1481 "\n -u Get/set unmaskirq flag (0/1)" \
1482 IF_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
1483 "\n -U Unregister an IDE interface (DANGEROUS)") \
1484 "\n -v Defaults; same as -mcudkrag for IDE drives" \
1485 "\n -V Display program version and exit immediately" \
1486 IF_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
1487 "\n -w Perform device reset (DANGEROUS)") \
1488 "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \
1489 IF_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
1490 "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \
1491 "\n -X Set IDE xfer mode (DANGEROUS)" \
1492 "\n -y Put IDE drive in standby mode" \
1493 "\n -Y Put IDE drive to sleep" \
1494 "\n -Z Disable Seagate auto-powersaving mode" \
1495 "\n -z Reread partition table" \
1497 #define head_trivial_usage \
1498 "[OPTIONS] [FILE]..."
1499 #define head_full_usage "\n\n" \
1500 "Print first 10 lines of each FILE (or stdin) to stdout.\n" \
1501 "With more than one FILE, precede each with a filename header.\n" \
1503 "\n -n N[kbm] Print first N lines" \
1504 IF_FEATURE_FANCY_HEAD( \
1505 "\n -c N[kbm] Print first N bytes" \
1506 "\n -q Never print headers" \
1507 "\n -v Always print headers" \
1510 "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
1512 #define head_example_usage \
1513 "$ head -n 2 /etc/passwd\n" \
1514 "root:x:0:0:root:/root:/bin/bash\n" \
1515 "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
1517 #define tail_trivial_usage \
1518 "[OPTIONS] [FILE]..."
1519 #define tail_full_usage "\n\n" \
1520 "Print last 10 lines of each FILE (or stdin) to stdout.\n" \
1521 "With more than one FILE, precede each with a filename header.\n" \
1523 "\n -f Print data as file grows" \
1524 IF_FEATURE_FANCY_TAIL( \
1525 "\n -s SECONDS Wait SECONDS between reads with -f" \
1527 "\n -n N[kbm] Print last N lines" \
1528 IF_FEATURE_FANCY_TAIL( \
1529 "\n -c N[kbm] Print last N bytes" \
1530 "\n -q Never print headers" \
1531 "\n -v Always print headers" \
1533 "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
1534 "\nIf N starts with a '+', output begins with the Nth item from the start" \
1535 "\nof each file, not from the end." \
1538 #define tail_example_usage \
1539 "$ tail -n 1 /etc/resolv.conf\n" \
1540 "nameserver 10.0.0.1\n"
1542 #define hexdump_trivial_usage \
1543 "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..."
1544 #define hexdump_full_usage "\n\n" \
1545 "Display FILEs (or stdin) in a user specified format\n" \
1547 "\n -b One-byte octal display" \
1548 "\n -c One-byte character display" \
1549 "\n -C Canonical hex+ASCII, 16 bytes per line" \
1550 "\n -d Two-byte decimal display" \
1551 "\n -e FORMAT_STRING" \
1552 "\n -f FORMAT_FILE" \
1553 "\n -n LENGTH Interpret only LENGTH bytes of input" \
1554 "\n -o Two-byte octal display" \
1555 "\n -s OFFSET Skip OFFSET bytes" \
1556 "\n -v Display all input data" \
1557 "\n -x Two-byte hexadecimal display" \
1558 IF_FEATURE_HEXDUMP_REVERSE( \
1559 "\n -R Reverse of 'hexdump -Cv'") \
1561 #define hd_trivial_usage \
1563 #define hd_full_usage "\n\n" \
1564 "hd is an alias for hexdump -C"
1566 #define hostid_trivial_usage \
1568 #define hostid_full_usage "\n\n" \
1569 "Print out a unique 32-bit identifier for the machine"
1571 #define hostname_trivial_usage \
1572 "[OPTIONS] [HOSTNAME | -F FILE]"
1573 #define hostname_full_usage "\n\n" \
1574 "Get or set hostname or DNS domain name\n" \
1577 "\n -i Addresses for the hostname" \
1578 "\n -d DNS domain name" \
1579 "\n -f Fully qualified domain name" \
1580 "\n -F FILE Use FILE's content as hostname" \
1582 #define hostname_example_usage \
1586 #define dnsdomainname_trivial_usage NOUSAGE_STR
1587 #define dnsdomainname_full_usage ""
1589 #define httpd_trivial_usage \
1593 IF_FEATURE_HTTPD_SETUID(" [-u USER[:GRP]]") \
1594 IF_FEATURE_HTTPD_BASIC_AUTH(" [-r REALM]") \
1596 "or httpd -d/-e" IF_FEATURE_HTTPD_AUTH_MD5("/-m") " STRING"
1597 #define httpd_full_usage "\n\n" \
1598 "Listen for incoming HTTP requests\n" \
1600 "\n -i Inetd mode" \
1601 "\n -f Don't daemonize" \
1602 "\n -v[v] Verbose" \
1603 "\n -p [IP:]PORT Bind to IP:PORT (default *:80)" \
1604 IF_FEATURE_HTTPD_SETUID( \
1605 "\n -u USER[:GRP] Set uid/gid after binding to port") \
1606 IF_FEATURE_HTTPD_BASIC_AUTH( \
1607 "\n -r REALM Authentication Realm for Basic Authentication") \
1608 "\n -h HOME Home directory (default .)" \
1609 "\n -c FILE Configuration file (default {/etc,HOME}/httpd.conf)" \
1610 IF_FEATURE_HTTPD_AUTH_MD5( \
1611 "\n -m STRING MD5 crypt STRING") \
1612 "\n -e STRING HTML encode STRING" \
1613 "\n -d STRING URL decode STRING" \
1615 #define hwclock_trivial_usage \
1616 IF_FEATURE_HWCLOCK_LONG_OPTIONS( \
1617 "[-r|--show] [-s|--hctosys] [-w|--systohc]" \
1618 " [-l|--localtime] [-u|--utc]" \
1621 IF_NOT_FEATURE_HWCLOCK_LONG_OPTIONS( \
1622 "[-r] [-s] [-w] [-l] [-u] [-f FILE]" \
1624 #define hwclock_full_usage "\n\n" \
1625 "Query and set hardware clock (RTC)\n" \
1627 "\n -r Show hardware clock time" \
1628 "\n -s Set system time from hardware clock" \
1629 "\n -w Set hardware clock to system time" \
1630 "\n -u Hardware clock is in UTC" \
1631 "\n -l Hardware clock is in local time" \
1632 "\n -f FILE Use specified device (e.g. /dev/rtc2)" \
1634 #define id_trivial_usage \
1636 #define id_full_usage "\n\n" \
1637 "Print information about USER or the current user\n" \
1640 "\n -Z Security context" \
1644 "\n -G Supplementary group IDs" \
1645 "\n -n Print names instead of numbers" \
1646 "\n -r Print real ID instead of effective ID" \
1648 #define id_example_usage \
1650 "uid=1000(andersen) gid=1000(andersen)\n"
1652 #define ifconfig_trivial_usage \
1653 IF_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
1654 #define ifconfig_full_usage "\n\n" \
1655 "Configure a network interface\n" \
1659 " [add ADDRESS[/PREFIXLEN]]\n") \
1661 " [del ADDRESS[/PREFIXLEN]]\n") \
1662 " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \
1663 " [netmask ADDRESS] [dstaddr ADDRESS]\n" \
1664 IF_FEATURE_IFCONFIG_SLIP( \
1665 " [outfill NN] [keepalive NN]\n") \
1666 " " IF_FEATURE_IFCONFIG_HW("[hw ether" IF_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \
1667 " [[-]trailers] [[-]arp] [[-]allmulti]\n" \
1668 " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \
1669 IF_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
1670 " [mem_start NN] [io_addr NN] [irq NN]\n") \
1673 #define ifenslave_trivial_usage \
1674 "[-cdf] MASTER_IFACE SLAVE_IFACE..."
1675 #define ifenslave_full_usage "\n\n" \
1676 "Configure network interfaces for parallel routing\n" \
1678 "\n -c,--change-active Change active slave" \
1679 "\n -d,--detach Remove slave interface from bonding device" \
1680 "\n -f,--force Force, even if interface is not Ethernet" \
1681 /* "\n -r,--receive-slave Create a receive-only slave" */
1683 #define ifenslave_example_usage \
1684 "To create a bond device, simply follow these three steps:\n" \
1685 "- ensure that the required drivers are properly loaded:\n" \
1686 " # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \
1687 "- assign an IP address to the bond device:\n" \
1688 " # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n" \
1689 "- attach all the interfaces you need to the bond device:\n" \
1690 " # ifenslave bond0 eth0 eth1 eth2\n" \
1691 " If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \
1692 " interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \
1693 " To detach a dead interface without setting the bond device down:\n" \
1694 " # ifenslave -d bond0 eth1\n\n" \
1695 " To set the bond device down and automatically release all the slaves:\n" \
1696 " # ifconfig bond0 down\n\n" \
1697 " To change active slave:\n" \
1698 " # ifenslave -c bond0 eth0\n" \
1700 #define ifplugd_trivial_usage \
1702 #define ifplugd_full_usage "\n\n" \
1703 "Network interface plug detection daemon\n" \
1705 "\n -n Don't daemonize" \
1706 "\n -s Don't log to syslog" \
1707 "\n -i IFACE Interface" \
1708 "\n -f/-F Treat link detection error as link down/link up" \
1709 "\n (otherwise exit on error)" \
1710 "\n -a Don't up interface at each link probe" \
1711 "\n -M Monitor creation/destruction of interface" \
1712 "\n (otherwise it must exist)" \
1713 "\n -r PROG Script to run" \
1714 "\n -x ARG Extra argument for script" \
1715 "\n -I Don't exit on nonzero exit code from script" \
1716 "\n -p Don't run script on daemon startup" \
1717 "\n -q Don't run script on daemon quit" \
1718 "\n -l Run script on startup even if no cable is detected" \
1719 "\n -t SECS Poll time in seconds" \
1720 "\n -u SECS Delay before running script after link up" \
1721 "\n -d SECS Delay after link down" \
1722 "\n -m MODE API mode (mii, priv, ethtool, wlan, iff, auto)" \
1723 "\n -k Kill running daemon" \
1725 #define ifup_trivial_usage \
1726 "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..."
1727 #define ifup_full_usage "\n\n" \
1729 "\n -a De/configure all interfaces automatically" \
1730 "\n -i FILE Use FILE for interface definitions" \
1731 "\n -n Print out what would happen, but don't do it" \
1732 IF_FEATURE_IFUPDOWN_MAPPING( \
1733 "\n (note: doesn't disable mappings)" \
1734 "\n -m Don't run any mappings" \
1736 "\n -v Print out what would happen before doing it" \
1737 "\n -f Force de/configuration" \
1739 #define ifdown_trivial_usage \
1740 "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..."
1741 #define ifdown_full_usage "\n\n" \
1743 "\n -a De/configure all interfaces automatically" \
1744 "\n -i FILE Use FILE for interface definitions" \
1745 "\n -n Print out what would happen, but don't do it" \
1746 IF_FEATURE_IFUPDOWN_MAPPING( \
1747 "\n (note: doesn't disable mappings)" \
1748 "\n -m Don't run any mappings" \
1750 "\n -v Print out what would happen before doing it" \
1751 "\n -f Force de/configuration" \
1753 #define inetd_trivial_usage \
1754 "[-fe] [-q N] [-R N] [CONFFILE]"
1755 #define inetd_full_usage "\n\n" \
1756 "Listen for network connections and launch programs\n" \
1758 "\n -f Run in foreground" \
1759 "\n -e Log to stderr" \
1760 "\n -q N Socket listen queue (default: 128)" \
1761 "\n -R N Pause services after N connects/min" \
1762 "\n (default: 0 - disabled)" \
1764 #define inotifyd_trivial_usage \
1765 "PROG FILE1[:MASK]..."
1766 #define inotifyd_full_usage "\n\n" \
1767 "Run PROG on filesystem changes." \
1768 "\nWhen a filesystem event matching MASK occurs on FILEn," \
1769 "\nPROG ACTUAL_EVENTS FILEn [SUBFILE] is run." \
1771 "\n a File is accessed" \
1772 "\n c File is modified" \
1773 "\n e Metadata changed" \
1774 "\n w Writable file is closed" \
1775 "\n 0 Unwritable file is closed" \
1776 "\n r File is opened" \
1777 "\n D File is deleted" \
1778 "\n M File is moved" \
1779 "\n u Backing fs is unmounted" \
1780 "\n o Event queue overflowed" \
1781 "\n x File can't be watched anymore" \
1782 "\nIf watching a directory:" \
1783 "\n m Subfile is moved into dir" \
1784 "\n y Subfile is moved out of dir" \
1785 "\n n Subfile is created" \
1786 "\n d Subfile is deleted" \
1788 "\ninotifyd waits for PROG to exit." \
1789 "\nWhen x event happens for all FILEs, inotifyd exits." \
1791 /* -v, -b, -c are ignored */
1792 #define install_trivial_usage \
1793 "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [SOURCE]... DEST"
1794 #define install_full_usage "\n\n" \
1795 "Copy files and set attributes\n" \
1797 "\n -c Just copy (default)" \
1798 "\n -d Create directories" \
1799 "\n -D Create leading target directories" \
1800 "\n -s Strip symbol table" \
1801 "\n -p Preserve date" \
1802 "\n -o USER Set ownership" \
1803 "\n -g GRP Set group ownership" \
1804 "\n -m MODE Set permissions" \
1806 "\n -Z Set security context" \
1809 /* would need to make the " | " optional depending on more than one selected: */
1810 #define ip_trivial_usage \
1812 IF_FEATURE_IP_ADDRESS("address | ") \
1813 IF_FEATURE_IP_ROUTE("route | ") \
1814 IF_FEATURE_IP_LINK("link | ") \
1815 IF_FEATURE_IP_TUNNEL("tunnel | ") \
1816 IF_FEATURE_IP_RULE("rule") \
1818 #define ip_full_usage "\n\n" \
1819 "ip [OPTIONS] OBJECT {COMMAND}\n" \
1820 "where OBJECT := {" \
1821 IF_FEATURE_IP_ADDRESS("address | ") \
1822 IF_FEATURE_IP_ROUTE("route | ") \
1823 IF_FEATURE_IP_LINK("link | ") \
1824 IF_FEATURE_IP_TUNNEL("tunnel | ") \
1825 IF_FEATURE_IP_RULE("rule") \
1827 "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \
1829 #define ipaddr_trivial_usage \
1830 "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
1831 " [dev STRING] [to PREFIX] }"
1832 #define ipaddr_full_usage "\n\n" \
1833 "ipaddr {add|delete} IFADDR dev STRING\n" \
1834 "ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \
1835 " [to PREFIX] [label PATTERN]\n" \
1836 " IFADDR := PREFIX | ADDR peer PREFIX\n" \
1837 " [broadcast ADDR] [anycast ADDR]\n" \
1838 " [label STRING] [scope SCOPE-ID]\n" \
1839 " SCOPE-ID := [host | link | global | NUMBER]" \
1841 #define ipcalc_trivial_usage \
1842 "[OPTIONS] ADDRESS[[/]NETMASK] [NETMASK]"
1843 #define ipcalc_full_usage "\n\n" \
1844 "Calculate IP network settings from a IP address\n" \
1846 IF_FEATURE_IPCALC_LONG_OPTIONS( \
1847 "\n -b,--broadcast Display calculated broadcast address" \
1848 "\n -n,--network Display calculated network address" \
1849 "\n -m,--netmask Display default netmask for IP" \
1850 IF_FEATURE_IPCALC_FANCY( \
1851 "\n -p,--prefix Display the prefix for IP/NETMASK" \
1852 "\n -h,--hostname Display first resolved host name" \
1853 "\n -s,--silent Don't ever display error messages" \
1856 IF_NOT_FEATURE_IPCALC_LONG_OPTIONS( \
1857 "\n -b Display calculated broadcast address" \
1858 "\n -n Display calculated network address" \
1859 "\n -m Display default netmask for IP" \
1860 IF_FEATURE_IPCALC_FANCY( \
1861 "\n -p Display the prefix for IP/NETMASK" \
1862 "\n -h Display first resolved host name" \
1863 "\n -s Don't ever display error messages" \
1867 #define ipcrm_trivial_usage \
1868 "[-MQS key] [-mqs id]"
1869 #define ipcrm_full_usage "\n\n" \
1870 "Upper-case options MQS remove an object by shmkey value.\n" \
1871 "Lower-case options remove an object by shmid value.\n" \
1873 "\n -mM Remove memory segment after last detach" \
1874 "\n -qQ Remove message queue" \
1875 "\n -sS Remove semaphore" \
1877 #define ipcs_trivial_usage \
1878 "[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
1879 #define ipcs_full_usage "\n\n" \
1880 " -i Show specific resource" \
1881 "\nResource specification:" \
1882 "\n -m Shared memory segments" \
1883 "\n -q Message queues" \
1884 "\n -s Semaphore arrays" \
1885 "\n -a All (default)" \
1886 "\nOutput format:" \
1893 #define iplink_trivial_usage \
1894 "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }"
1895 #define iplink_full_usage "\n\n" \
1896 "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
1897 " dynamic { on | off } |\n" \
1899 "iplink show [DEVICE]" \
1901 #define iproute_trivial_usage \
1902 "{ list | flush | { add | del | change | append |\n" \
1903 " replace | monitor } ROUTE }"
1904 #define iproute_full_usage "\n\n" \
1905 "iproute { list | flush } SELECTOR\n" \
1906 "iproute get ADDRESS [from ADDRESS iif STRING]\n" \
1907 " [oif STRING] [tos TOS]\n" \
1908 "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
1909 " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \
1910 " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]\n" \
1911 " [metric METRIC]" \
1913 #define iprule_trivial_usage \
1914 "{[list | add | del] RULE}"
1915 #define iprule_full_usage "\n\n" \
1916 "iprule [list | add | del] SELECTOR ACTION\n" \
1917 " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \
1918 " [dev STRING] [pref NUMBER]\n" \
1919 " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \
1920 " [prohibit | reject | unreachable]\n" \
1921 " [realms [SRCREALM/]DSTREALM]\n" \
1922 " TABLE_ID := [local | main | default | NUMBER]" \
1924 #define iptunnel_trivial_usage \
1925 "{ add | change | del | show } [NAME]\n" \
1926 " [mode { ipip | gre | sit }]\n" \
1927 " [remote ADDR] [local ADDR] [ttl TTL]"
1928 #define iptunnel_full_usage "\n\n" \
1929 "iptunnel { add | change | del | show } [NAME]\n" \
1930 " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \
1931 " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
1932 " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \
1934 #define kbd_mode_trivial_usage \
1935 "[-a|k|s|u] [-C TTY]"
1936 #define kbd_mode_full_usage "\n\n" \
1937 "Report or set the keyboard mode\n" \
1939 "\n -a Default (ASCII)" \
1940 "\n -k Medium-raw (keyboard)" \
1941 "\n -s Raw (scancode)" \
1942 "\n -u Unicode (utf-8)" \
1943 "\n -C TTY Affect TTY instead of /dev/tty" \
1945 #define kill_trivial_usage \
1946 "[-l] [-SIG] PID..."
1947 #define kill_full_usage "\n\n" \
1948 "Send a signal (default: TERM) to given PIDs\n" \
1950 "\n -l List all signal names and numbers" \
1951 /* "\n -s SIG Yet another way of specifying SIG" */ \
1953 #define kill_example_usage \
1954 "$ ps | grep apache\n" \
1955 "252 root root S [apache]\n" \
1956 "263 www-data www-data S [apache]\n" \
1957 "264 www-data www-data S [apache]\n" \
1958 "265 www-data www-data S [apache]\n" \
1959 "266 www-data www-data S [apache]\n" \
1960 "267 www-data www-data S [apache]\n" \
1963 #define killall_trivial_usage \
1964 "[-l] [-q] [-SIG] PROCESS_NAME..."
1965 #define killall_full_usage "\n\n" \
1966 "Send a signal (default: TERM) to given processes\n" \
1968 "\n -l List all signal names and numbers" \
1969 /* "\n -s SIG Yet another way of specifying SIG" */ \
1970 "\n -q Don't complain if no processes were killed" \
1972 #define killall_example_usage \
1973 "$ killall apache\n"
1975 #define killall5_trivial_usage \
1976 "[-l] [-SIG] [-o PID]..."
1977 #define killall5_full_usage "\n\n" \
1978 "Send a signal (default: TERM) to all processes outside current session\n" \
1980 "\n -l List all signal names and numbers" \
1981 "\n -o PID Don't signal this PID" \
1982 /* "\n -s SIG Yet another way of specifying SIG" */ \
1984 #define klogd_trivial_usage \
1986 #define klogd_full_usage "\n\n" \
1989 "\n -c N Only messages with level < N are printed to console" \
1990 "\n -n Run in foreground" \
1992 #define length_trivial_usage \
1994 #define length_full_usage "\n\n" \
1995 "Print STRING's length"
1997 #define length_example_usage \
1998 "$ length Hello\n" \
2001 #define less_trivial_usage \
2002 "[-EMNmh~I?] [FILE]..."
2003 #define less_full_usage "\n\n" \
2004 "View FILE (or stdin) one screenful at a time\n" \
2006 "\n -E Quit once the end of a file is reached" \
2007 "\n -M,-m Display status line with line numbers" \
2008 "\n and percentage through the file" \
2009 "\n -N Prefix line number to each line" \
2010 "\n -I Ignore case in all searches" \
2011 "\n -~ Suppress ~s displayed past the end of the file" \
2013 #define linux32_trivial_usage NOUSAGE_STR
2014 #define linux32_full_usage ""
2015 #define linux64_trivial_usage NOUSAGE_STR
2016 #define linux64_full_usage ""
2018 #define setarch_trivial_usage \
2019 "personality PROG ARGS"
2020 #define setarch_full_usage "\n\n" \
2021 "Personality may be:\n" \
2022 " linux32 Set 32bit uname emulation\n" \
2023 " linux64 Set 64bit uname emulation" \
2025 #define ln_trivial_usage \
2026 "[OPTIONS] TARGET... LINK|DIR"
2027 #define ln_full_usage "\n\n" \
2028 "Create a link LINK or DIR/TARGET to the specified TARGET(s)\n" \
2030 "\n -s Make symlinks instead of hardlinks" \
2031 "\n -f Remove existing destinations" \
2032 "\n -n Don't dereference symlinks - treat like normal file" \
2033 "\n -b Make a backup of the target (if exists) before link operation" \
2034 "\n -S suf Use suffix instead of ~ when making backup files" \
2036 #define ln_example_usage \
2037 "$ ln -s BusyBox /tmp/ls\n" \
2038 "$ ls -l /tmp/ls\n" \
2039 "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
2041 #define load_policy_trivial_usage NOUSAGE_STR
2042 #define load_policy_full_usage ""
2044 #define loadfont_trivial_usage \
2046 #define loadfont_full_usage "\n\n" \
2047 "Load a console font from stdin" \
2048 /* "\n -C TTY Affect TTY instead of /dev/tty" */ \
2050 #define loadfont_example_usage \
2051 "$ loadfont < /etc/i18n/fontname\n"
2053 #define loadkmap_trivial_usage \
2055 #define loadkmap_full_usage "\n\n" \
2056 "Load a binary keyboard translation table from stdin\n" \
2057 /* "\n -C TTY Affect TTY instead of /dev/tty" */ \
2059 #define loadkmap_example_usage \
2060 "$ loadkmap < /etc/i18n/lang-keymap\n"
2062 #define logger_trivial_usage \
2063 "[OPTIONS] [MESSAGE]"
2064 #define logger_full_usage "\n\n" \
2065 "Write MESSAGE (or stdin) to syslog\n" \
2067 "\n -s Log to stderr as well as the system log" \
2068 "\n -t TAG Log using the specified tag (defaults to user name)" \
2069 "\n -p PRIO Priority (numeric or facility.level pair)" \
2071 #define logger_example_usage \
2072 "$ logger \"hello\"\n"
2074 #define login_trivial_usage \
2075 "[-p] [-h HOST] [[-f] USER]"
2076 #define login_full_usage "\n\n" \
2077 "Begin a new session on the system\n" \
2079 "\n -f Don't authenticate (user already authenticated)" \
2080 "\n -h Name of the remote host" \
2081 "\n -p Preserve environment" \
2083 #define logname_trivial_usage \
2085 #define logname_full_usage "\n\n" \
2086 "Print the name of the current user"
2087 #define logname_example_usage \
2091 #define logread_trivial_usage \
2093 #define logread_full_usage "\n\n" \
2094 "Show messages in syslogd's circular buffer\n" \
2096 "\n -f Output data as log grows" \
2098 #define losetup_trivial_usage \
2099 "[-o OFS] LOOPDEV FILE - associate loop devices\n" \
2100 " losetup -d LOOPDEV - disassociate\n" \
2101 " losetup [-f] - show"
2102 #define losetup_full_usage "\n\n" \
2104 "\n -o OFS Start OFS bytes into FILE" \
2105 "\n -f Show first free loop device" \
2107 #define losetup_notes_usage \
2108 "No arguments will display all current associations.\n" \
2109 "One argument (losetup /dev/loop1) will display the current association\n" \
2110 "(if any), or disassociate it (with -d). The display shows the offset\n" \
2111 "and filename of the file the loop device is currently bound to.\n\n" \
2112 "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
2113 "with an optional offset (-o 12345). Encryption is not yet supported.\n" \
2114 "losetup -f will show the first loop free loop device\n\n"
2116 #define lpd_trivial_usage \
2117 "SPOOLDIR [HELPER [ARGS]]"
2118 #define lpd_full_usage "\n\n" \
2119 "SPOOLDIR must contain (symlinks to) device nodes or directories" \
2120 "\nwith names matching print queue names. In the first case, jobs are" \
2121 "\nsent directly to the device. Otherwise each job is stored in queue" \
2122 "\ndirectory and HELPER program is called. Name of file to print" \
2123 "\nis passed in $DATAFILE variable." \
2125 "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \
2127 #define lpq_trivial_usage \
2128 "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID]... [-fs]"
2129 #define lpq_full_usage "\n\n" \
2131 "\n -P lp service to connect to (else uses $PRINTER)" \
2132 "\n -d Delete jobs" \
2133 "\n -f Force any waiting job to be printed" \
2134 "\n -s Short display" \
2136 #define lpr_trivial_usage \
2137 "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE]..."
2138 /* -C CLASS exists too, not shown.
2139 * CLASS is supposed to be printed on banner page, if one is requested */
2140 #define lpr_full_usage "\n\n" \
2142 "\n -P lp service to connect to (else uses $PRINTER)"\
2143 "\n -m Send mail on completion" \
2144 "\n -h Print banner page too" \
2147 #define lsattr_trivial_usage \
2148 "[-Radlv] [FILE]..."
2149 #define lsattr_full_usage "\n\n" \
2150 "List file attributes on an ext2 fs\n" \
2153 "\n -a Don't hide entries starting with ." \
2154 "\n -d List directory entries instead of contents" \
2155 "\n -l List long flag names" \
2156 "\n -v List the file's version/generation number" \
2158 #define lspci_trivial_usage \
2160 #define lspci_full_usage "\n\n" \
2161 "List all PCI devices" \
2163 "\n -m Parseable output" \
2164 "\n -k Show driver" \
2166 #define lsusb_trivial_usage NOUSAGE_STR
2167 #define lsusb_full_usage ""
2169 #if ENABLE_FEATURE_MAKEDEVS_LEAF
2170 #define makedevs_trivial_usage \
2171 "NAME TYPE MAJOR MINOR FIRST LAST [s]"
2172 #define makedevs_full_usage "\n\n" \
2173 "Create a range of block or character special files" \
2176 "\n b Block device" \
2177 "\n c Character device" \
2178 "\n f FIFO, MAJOR and MINOR are ignored" \
2180 "\nFIRST..LAST specify numbers appended to NAME." \
2181 "\nIf 's' is the last argument, the base device is created as well." \
2184 "\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \
2185 "\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
2186 #define makedevs_example_usage \
2187 "# makedevs /dev/ttyS c 4 66 2 63\n" \
2188 "[creates ttyS2-ttyS63]\n" \
2189 "# makedevs /dev/hda b 3 0 0 8 s\n" \
2190 "[creates hda,hda1-hda8]\n"
2193 #if ENABLE_FEATURE_MAKEDEVS_TABLE
2194 #define makedevs_trivial_usage \
2195 "[-d device_table] rootdir"
2196 #define makedevs_full_usage "\n\n" \
2197 "Create a range of special files as specified in a device table.\n" \
2198 "Device table entries take the form of:\n" \
2199 "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
2200 "Where name is the file name, type can be one of:\n" \
2201 " f Regular file\n" \
2203 " c Character device\n" \
2204 " b Block device\n" \
2205 " p Fifo (named pipe)\n" \
2206 "uid is the user id for the target file, gid is the group id for the\n" \
2207 "target file. The rest of the entries (major, minor, etc) apply to\n" \
2208 "to device special files. A '-' may be used for blank entries."
2209 #define makedevs_example_usage \
2211 "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
2212 "/dev d 755 0 0 - - - - -\n" \
2213 "/dev/console c 666 0 0 5 1 - - -\n" \
2214 "/dev/null c 666 0 0 1 3 0 0 -\n" \
2215 "/dev/zero c 666 0 0 1 5 0 0 -\n" \
2216 "/dev/hda b 640 0 0 3 0 0 0 -\n" \
2217 "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
2227 #define makemime_trivial_usage \
2228 "[OPTIONS] [FILE]..."
2229 #define makemime_full_usage "\n\n" \
2230 "Create multipart MIME-encoded message from FILEs\n" \
2231 /* "Transfer encoding is base64, disposition is inline (not attachment)\n" */ \
2233 "\n -o FILE Output. Default: stdout" \
2234 "\n -a HDR Add header. Examples:" \
2235 "\n \"From: user@host.org\", \"Date: `date -R`\"" \
2236 "\n -c CT Content type. Default: text/plain" \
2237 "\n -C CS Charset. Default: " CONFIG_FEATURE_MIME_CHARSET \
2238 /* "\n -e ENC Transfer encoding. Ignored. base64 is assumed" */ \
2240 "\nOther options are silently ignored" \
2242 #define man_trivial_usage \
2243 "[-aw] [MANPAGE]..."
2244 #define man_full_usage "\n\n" \
2245 "Format and display manual page\n" \
2247 "\n -a Display all pages" \
2248 "\n -w Show page locations" \
2250 #define matchpathcon_trivial_usage \
2251 "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
2252 #define matchpathcon_full_usage "\n\n" \
2253 " -n Don't display path" \
2254 "\n -N Don't use translations" \
2255 "\n -f Use alternate file_context file" \
2256 "\n -p Use prefix to speed translations" \
2257 "\n -V Verify file context on disk matches defaults" \
2259 #define md5sum_trivial_usage \
2261 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum -c [-sw] [FILE]")
2262 #define md5sum_full_usage "\n\n" \
2263 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
2264 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2266 "\n -c Check sums against given list" \
2267 "\n -s Don't output anything, status code shows success" \
2268 "\n -w Warn about improperly formatted checksum lines" \
2271 #define md5sum_example_usage \
2272 "$ md5sum < busybox\n" \
2273 "6fd11e98b98a58f64ff3398d7b324003\n" \
2274 "$ md5sum busybox\n" \
2275 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
2277 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
2281 #define sha1sum_trivial_usage \
2283 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum -c [-sw] [FILE]")
2284 #define sha1sum_full_usage "\n\n" \
2285 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums" \
2286 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2288 "\n -c Check sums against given list" \
2289 "\n -s Don't output anything, status code shows success" \
2290 "\n -w Warn about improperly formatted checksum lines" \
2293 #define sha256sum_trivial_usage \
2295 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha256sum -c [-sw] [FILE]")
2296 #define sha256sum_full_usage "\n\n" \
2297 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA256 checksums" \
2298 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2300 "\n -c Check sums against given list" \
2301 "\n -s Don't output anything, status code shows success" \
2302 "\n -w Warn about improperly formatted checksum lines" \
2305 #define sha512sum_trivial_usage \
2307 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha512sum -c [-sw] [FILE]")
2308 #define sha512sum_full_usage "\n\n" \
2309 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA512 checksums" \
2310 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2312 "\n -c Check sums against given list" \
2313 "\n -s Don't output anything, status code shows success" \
2314 "\n -w Warn about improperly formatted checksum lines" \
2317 #define mdev_trivial_usage \
2319 #define mdev_full_usage "\n\n" \
2320 " -s Scan /sys and populate /dev during system boot\n" \
2322 "It can be run by kernel as a hotplug helper. To activate it:\n" \
2323 " echo /sbin/mdev > /proc/sys/kernel/hotplug\n" \
2324 IF_FEATURE_MDEV_CONF( \
2325 "It uses /etc/mdev.conf with lines\n" \
2326 "[-]DEVNAME UID:GID PERM" \
2327 IF_FEATURE_MDEV_RENAME(" [>|=PATH]") \
2328 IF_FEATURE_MDEV_EXEC(" [@|$|*PROG]") \
2331 #define mdev_notes_usage "" \
2332 IF_FEATURE_MDEV_CONFIG( \
2333 "The mdev config file contains lines that look like:\n" \
2334 " hd[a-z][0-9]* 0:3 660\n\n" \
2335 "That's device name (with regex match), uid:gid, and permissions.\n\n" \
2336 IF_FEATURE_MDEV_EXEC( \
2337 "Optionally, that can be followed (on the same line) by a special character\n" \
2338 "and a command line to run after creating/before deleting the corresponding\n" \
2339 "device(s). The environment variable $MDEV indicates the active device node\n" \
2340 "(which is useful if it's a regex match). For example:\n\n" \
2341 " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
2342 "The special characters are @ (run after creating), $ (run before deleting),\n" \
2343 "and * (run both after creating and before deleting). The commands run in\n" \
2344 "the /dev directory, and use system() which calls /bin/sh.\n\n" \
2346 "Config file parsing stops on the first matching line. If no config\n" \
2347 "entry is matched, devices are created with default 0:0 660. (Make\n" \
2348 "the last line match .* to override this.)\n\n" \
2351 #define microcom_trivial_usage \
2352 "[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY"
2353 #define microcom_full_usage "\n\n" \
2354 "Copy bytes for stdin to TTY and from TTY to stdout\n" \
2356 "\n -d Wait up to DELAY ms for TTY output before sending every" \
2357 "\n next byte to it" \
2358 "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \
2359 "\n -s Set serial line to SPEED" \
2360 "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \
2362 #define mkdir_trivial_usage \
2363 "[OPTIONS] DIRECTORY..."
2364 #define mkdir_full_usage "\n\n" \
2365 "Create DIRECTORY\n" \
2368 "\n -p No error if exists; make parent directories as needed" \
2370 "\n -Z Set security context" \
2373 #define mkdir_example_usage \
2374 "$ mkdir /tmp/foo\n" \
2375 "$ mkdir /tmp/foo\n" \
2376 "/tmp/foo: File exists\n" \
2377 "$ mkdir /tmp/foo/bar/baz\n" \
2378 "/tmp/foo/bar/baz: No such file or directory\n" \
2379 "$ mkdir -p /tmp/foo/bar/baz\n"
2381 #define mkfifo_trivial_usage \
2382 "[-m MODE] " IF_SELINUX("[-Z] ") "NAME"
2383 #define mkfifo_full_usage "\n\n" \
2384 "Create named pipe\n" \
2386 "\n -m MODE Mode (default a=rw)" \
2388 "\n -Z Set security context" \
2391 #define mkfs_ext2_trivial_usage \
2393 /* "[-c|-l filename] " */ \
2395 /* "[-f fragment-size] [-g blocks-per-group] " */ \
2396 "[-i INODE_RATIO] [-I INODE_SIZE] " \
2397 /* "[-j] [-J journal-options] [-N number-of-inodes] " */ \
2398 "[-m RESERVED_PERCENT] " \
2399 /* "[-o creator-os] [-O feature[,...]] [-q] " */ \
2400 /* "[r fs-revision-level] [-E extended-options] [-v] [-F] " */ \
2402 /* "[-M last-mounted-directory] [-S] [-T filesystem-type] " */ \
2404 #define mkfs_ext2_full_usage "\n\n" \
2405 " -b BLK_SIZE Block size, bytes" \
2406 /* "\n -c Check device for bad blocks" */ \
2407 /* "\n -E opts Set extended options" */ \
2408 /* "\n -f size Fragment size in bytes" */ \
2410 /* "\n -g N Number of blocks in a block group" */ \
2411 "\n -i RATIO Max number of files is filesystem_size / RATIO" \
2412 "\n -I BYTES Inode size (min 128)" \
2413 /* "\n -j Create a journal (ext3)" */ \
2414 /* "\n -J opts Set journal options (size/device)" */ \
2415 /* "\n -l file Read bad blocks list from file" */ \
2416 "\n -L LBL Volume label" \
2417 "\n -m PERCENT Percent of blocks to reserve for admin" \
2418 /* "\n -M dir Set last mounted directory" */ \
2420 /* "\n -N N Number of inodes to create" */ \
2421 /* "\n -o os Set the 'creator os' field" */ \
2422 /* "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" */ \
2423 /* "\n -q Quiet" */ \
2424 /* "\n -r rev Set filesystem revision" */ \
2425 /* "\n -S Write superblock and group descriptors only" */ \
2426 /* "\n -T fs-type Set usage type (news/largefile/largefile4)" */ \
2427 /* "\n -v Verbose" */ \
2429 #define mkfs_minix_trivial_usage \
2430 "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]"
2431 #define mkfs_minix_full_usage "\n\n" \
2432 "Make a MINIX filesystem\n" \
2434 "\n -c Check device for bad blocks" \
2435 "\n -n [14|30] Maximum length of filenames" \
2436 "\n -i INODES Number of inodes for the filesystem" \
2437 "\n -l FILE Read bad blocks list from FILE" \
2438 "\n -v Make version 2 filesystem" \
2440 #define mkfs_reiser_trivial_usage \
2441 "[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]"
2443 #define mkfs_reiser_full_usage "\n\n" \
2444 "Make a ReiserFS V3 filesystem\n" \
2447 "\n -l LBL Volume label" \
2449 #define mkfs_vfat_trivial_usage \
2450 "[-v] [-n LABEL] BLOCKDEV [KBYTES]"
2451 /* Accepted but ignored:
2452 "[-c] [-C] [-I] [-l bad-block-file] [-b backup-boot-sector] "
2453 "[-m boot-msg-file] [-i volume-id] "
2454 "[-s sectors-per-cluster] [-S logical-sector-size] [-f number-of-FATs] "
2455 "[-h hidden-sectors] [-F fat-size] [-r root-dir-entries] [-R reserved-sectors] "
2457 #define mkfs_vfat_full_usage "\n\n" \
2458 "Make a FAT32 filesystem\n" \
2460 /* "\n -c Check device for bad blocks" */ \
2462 /* "\n -I Allow to use entire disk device (e.g. /dev/hda)" */ \
2463 "\n -n LBL Volume label" \
2465 #define mknod_trivial_usage \
2466 "[-m MODE] " IF_SELINUX("[-Z] ") "NAME TYPE MAJOR MINOR"
2467 #define mknod_full_usage "\n\n" \
2468 "Create a special file (block, character, or pipe)\n" \
2470 "\n -m MODE Creation mode (default a=rw)" \
2472 "\n -Z Set security context" \
2475 "\n b Block device" \
2476 "\n c or u Character device" \
2477 "\n p Named pipe (MAJOR and MINOR are ignored)" \
2479 #define mknod_example_usage \
2480 "$ mknod /dev/fd0 b 2 0\n" \
2481 "$ mknod -m 644 /tmp/pipe p\n"
2483 #define mkswap_trivial_usage \
2484 "[-L LBL] BLOCKDEV [KBYTES]"
2485 #define mkswap_full_usage "\n\n" \
2486 "Prepare BLOCKDEV to be used as swap partition\n" \
2490 #define mktemp_trivial_usage \
2491 "[-dt] [-p DIR] [TEMPLATE]"
2492 #define mktemp_full_usage "\n\n" \
2493 "Create a temporary file with name based on TEMPLATE and print its name.\n" \
2494 "TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" \
2496 "\n -d Make a directory instead of a file" \
2497 /* "\n -q Fail silently if an error occurs" - we ignore it */ \
2498 "\n -t Generate a path rooted in temporary directory" \
2499 "\n -p DIR Use DIR as a temporary directory (implies -t)" \
2501 "\nFor -t or -p, directory is chosen as follows:" \
2502 "\n$TMPDIR if set, else -p DIR, else /tmp" \
2504 #define mktemp_example_usage \
2505 "$ mktemp /tmp/temp.XXXXXX\n" \
2506 "/tmp/temp.mWiLjM\n" \
2507 "$ ls -la /tmp/temp.mWiLjM\n" \
2508 "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
2510 #define more_trivial_usage \
2512 #define more_full_usage "\n\n" \
2513 "View FILE (or stdin) one screenful at a time"
2515 #define more_example_usage \
2518 #define mount_trivial_usage \
2519 "[OPTIONS] [-o OPTS] DEVICE NODE"
2520 #define mount_full_usage "\n\n" \
2521 "Mount a filesystem. Filesystem autodetection requires /proc.\n" \
2523 "\n -a Mount all filesystems in fstab" \
2524 IF_FEATURE_MOUNT_FAKE( \
2525 IF_FEATURE_MTAB_SUPPORT( \
2526 "\n -f Update /etc/mtab, but don't mount" \
2528 IF_NOT_FEATURE_MTAB_SUPPORT( \
2532 IF_FEATURE_MOUNT_HELPERS( \
2533 "\n -i Don't run mount helper" \
2535 IF_FEATURE_MTAB_SUPPORT( \
2536 "\n -n Don't update /etc/mtab" \
2538 "\n -r Read-only mount" \
2539 "\n -w Read-write mount (default)" \
2540 "\n -t FSTYPE Filesystem type" \
2541 "\n -O OPT Mount only filesystems with option OPT (-a only)" \
2543 IF_FEATURE_MOUNT_LOOP( \
2544 "\n loop Ignored (loop devices are autodetected)" \
2546 IF_FEATURE_MOUNT_FLAGS( \
2547 "\n [a]sync Writes are [a]synchronous" \
2548 "\n [no]atime Disable/enable updates to inode access times" \
2549 "\n [no]diratime Disable/enable atime updates to directories" \
2550 "\n [no]relatime Disable/enable atime updates relative to modification time" \
2551 "\n [no]dev (Dis)allow use of special device files" \
2552 "\n [no]exec (Dis)allow use of executable files" \
2553 "\n [no]suid (Dis)allow set-user-id-root programs" \
2554 "\n [r]shared Convert [recursively] to a shared subtree" \
2555 "\n [r]slave Convert [recursively] to a slave subtree" \
2556 "\n [r]private Convert [recursively] to a private subtree" \
2557 "\n [un]bindable Make mount point [un]able to be bind mounted" \
2558 "\n bind Bind a file or directory to another location" \
2559 "\n move Relocate an existing mount point" \
2561 "\n remount Remount a mounted filesystem, changing flags" \
2562 "\n ro/rw Same as -r/-w" \
2564 "\nThere are filesystem-specific -o flags." \
2566 #define mount_example_usage \
2568 "/dev/hda3 on / type minix (rw)\n" \
2569 "proc on /proc type proc (rw)\n" \
2570 "devpts on /dev/pts type devpts (rw)\n" \
2571 "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
2572 "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
2573 "$ mount cd_image.iso mydir\n"
2574 #define mount_notes_usage \
2575 "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
2577 #define mountpoint_trivial_usage \
2578 "[-q] <[-dn] DIR | -x DEVICE>"
2579 #define mountpoint_full_usage "\n\n" \
2580 "Check if the directory is a mountpoint\n" \
2583 "\n -d Print major/minor device number of the filesystem" \
2584 "\n -n Print device name of the filesystem" \
2585 "\n -x Print major/minor device number of the blockdevice" \
2587 #define mountpoint_example_usage \
2588 "$ mountpoint /proc\n" \
2589 "/proc is not a mountpoint\n" \
2590 "$ mountpoint /sys\n" \
2591 "/sys is a mountpoint\n"
2593 #define mt_trivial_usage \
2594 "[-f device] opcode value"
2595 #define mt_full_usage "\n\n" \
2596 "Control magnetic tape drive operation\n" \
2598 "Available Opcodes:\n" \
2600 "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
2601 "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
2602 "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
2603 "setpart tell unload unlock weof wset" \
2605 #define nameif_trivial_usage \
2606 "[-s] [-c FILE] [{IFNAME MACADDR}]"
2607 #define nameif_full_usage "\n\n" \
2608 "Rename network interface while it in the down state\n" \
2610 "\n -c FILE Use configuration file (default: /etc/mactab)" \
2611 "\n -s Use syslog (LOCAL0 facility)" \
2612 "\n IFNAME MACADDR new_interface_name interface_mac_address" \
2614 #define nameif_example_usage \
2615 "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
2617 "$ nameif -c /etc/my_mactab_file\n" \
2619 #define nohup_trivial_usage \
2621 #define nohup_full_usage "\n\n" \
2622 "Run PROG immune to hangups, with output to a non-tty"
2623 #define nohup_example_usage \
2626 #define nslookup_trivial_usage \
2628 #define nslookup_full_usage "\n\n" \
2629 "Query the nameserver for the IP address of the given HOST\n" \
2630 "optionally using a specified DNS server"
2631 #define nslookup_example_usage \
2632 "$ nslookup localhost\n" \
2633 "Server: default\n" \
2634 "Address: default\n" \
2637 "Address: 127.0.0.1\n"
2639 #define ntpd_trivial_usage \
2640 "[-dnqNw"IF_FEATURE_NTPD_SERVER("l")"] [-S PROG] [-p PEER]..."
2641 #define ntpd_full_usage "\n\n" \
2642 "NTP client/server\n" \
2645 "\n -n Do not daemonize" \
2646 "\n -q Quit after clock is set" \
2647 "\n -N Run at high priority" \
2648 "\n -w Do not set time (only query peers), implies -n" \
2649 IF_FEATURE_NTPD_SERVER( \
2650 "\n -l Run as server on port 123" \
2652 "\n -S PROG Run PROG after stepping time, stratum change, and every 11 mins" \
2653 "\n -p PEER Obtain time from PEER (may be repeated)" \
2655 #define od_trivial_usage \
2656 "[-aBbcDdeFfHhIiLlOovXx] " IF_DESKTOP("[-t TYPE] ") "[FILE]"
2657 #define od_full_usage "\n\n" \
2658 "Write an unambiguous representation, octal bytes by default, of FILE\n" \
2659 "(or stdin) to stdout"
2661 #define openvt_trivial_usage \
2662 "[-c N] [-sw] [PROG ARGS]"
2663 #define openvt_full_usage "\n\n" \
2664 "Start PROG on a new virtual terminal\n" \
2666 "\n -c N Use specified VT" \
2667 "\n -s Switch to the VT" \
2668 /* "\n -l Run PROG as login shell (by prepending '-')" */ \
2669 "\n -w Wait for PROG to exit" \
2671 #define openvt_example_usage \
2672 "openvt 2 /bin/ash\n"
2675 #define parse_trivial_usage \
2676 "[-n MAXTOKENS] [-m MINTOKENS] [-d DELIMS] [-f FLAGS] FILE..."
2677 #define parse_full_usage ""
2680 #define passwd_trivial_usage \
2682 #define passwd_full_usage "\n\n" \
2683 "Change USER's password. If no USER is specified,\n" \
2684 "changes the password for the current user.\n" \
2686 "\n -a ALG Algorithm to use for password (des, md5)" /* ", sha1)" */ \
2687 "\n -d Delete password for the account" \
2688 "\n -l Lock (disable) account" \
2689 "\n -u Unlock (re-enable) account" \
2691 #define chpasswd_trivial_usage \
2692 IF_LONG_OPTS("[--md5|--encrypted]") IF_NOT_LONG_OPTS("[-m|-e]")
2693 #define chpasswd_full_usage "\n\n" \
2694 "Read user:password from stdin and update /etc/passwd\n" \
2697 "\n -e,--encrypted Supplied passwords are in encrypted form" \
2698 "\n -m,--md5 Use MD5 encryption instead of DES" \
2701 "\n -e Supplied passwords are in encrypted form" \
2702 "\n -m Use MD5 encryption instead of DES" \
2705 #define pgrep_trivial_usage \
2706 "[-flnovx] [-s SID|-P PPID|PATTERN]"
2707 #define pgrep_full_usage "\n\n" \
2708 "Display process(es) selected by regex PATTERN\n" \
2710 "\n -l Show command name too" \
2711 "\n -f Match against entire command line" \
2712 "\n -n Show the newest process only" \
2713 "\n -o Show the oldest process only" \
2714 "\n -v Negate the match" \
2715 "\n -x Match whole name (not substring)" \
2716 "\n -s Match session ID (0 for current)" \
2717 "\n -P Match parent process ID" \
2719 #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
2720 #define pidof_trivial_usage \
2721 "[OPTIONS] [NAME]..."
2722 #define USAGE_PIDOF "\n\nOptions:"
2724 #define pidof_trivial_usage \
2726 #define USAGE_PIDOF /* none */
2728 #define pidof_full_usage "\n\n" \
2729 "List PIDs of all processes with names that match NAMEs" \
2731 IF_FEATURE_PIDOF_SINGLE( \
2732 "\n -s Show only one PID" \
2734 IF_FEATURE_PIDOF_OMIT( \
2735 "\n -o PID Omit given pid" \
2736 "\n Use %PPID to omit pid of pidof's parent" \
2739 #define pidof_example_usage \
2742 IF_FEATURE_PIDOF_OMIT( \
2743 "$ pidof /bin/sh\n20351 5973 5950\n") \
2744 IF_FEATURE_PIDOF_OMIT( \
2745 "$ pidof /bin/sh -o %PPID\n20351 5950")
2747 #define pipe_progress_trivial_usage NOUSAGE_STR
2748 #define pipe_progress_full_usage ""
2750 #define pivot_root_trivial_usage \
2752 #define pivot_root_full_usage "\n\n" \
2753 "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
2754 "the new root file system"
2756 #define pkill_trivial_usage \
2757 "[-l|-SIGNAL] [-fnovx] [-s SID|-P PPID|PATTERN]"
2758 #define pkill_full_usage "\n\n" \
2759 "Send a signal to process(es) selected by regex PATTERN\n" \
2761 "\n -l List all signals" \
2762 "\n -f Match against entire command line" \
2763 "\n -n Signal the newest process only" \
2764 "\n -o Signal the oldest process only" \
2765 "\n -v Negate the match" \
2766 "\n -x Match whole name (not substring)" \
2767 "\n -s Match session ID (0 for current)" \
2768 "\n -P Match parent process ID" \
2770 #define popmaildir_trivial_usage \
2771 "[OPTIONS] MAILDIR [CONN_HELPER ARGS]"
2772 #define popmaildir_full_usage "\n\n" \
2773 "Fetch content of remote mailbox to local maildir\n" \
2775 /* "\n -b Binary mode. Ignored" */ \
2776 /* "\n -d Debug. Ignored" */ \
2777 /* "\n -m Show used memory. Ignored" */ \
2778 /* "\n -V Show version. Ignored" */ \
2779 /* "\n -c Use tcpclient. Ignored" */ \
2780 /* "\n -a Use APOP protocol. Implied. If server supports APOP -> use it" */ \
2781 "\n -s Skip authorization" \
2782 "\n -T Get messages with TOP instead of RETR" \
2783 "\n -k Keep retrieved messages on the server" \
2784 "\n -t SEC Network timeout" \
2785 IF_FEATURE_POPMAILDIR_DELIVERY( \
2786 "\n -F \"PROG ARGS\" Filter program (may be repeated)" \
2787 "\n -M \"PROG ARGS\" Delivery program" \
2790 "\nFetch from plain POP3 server:" \
2791 "\npopmaildir -k DIR nc pop3.server.com 110 <user_and_pass.txt" \
2792 "\nFetch from SSLed POP3 server and delete fetched emails:" \
2793 "\npopmaildir DIR -- openssl s_client -quiet -connect pop3.server.com:995 <user_and_pass.txt"
2794 /* "\n -R BYTES Remove old messages on the server >= BYTES. Ignored" */
2795 /* "\n -Z N1-N2 Remove messages from N1 to N2 (dangerous). Ignored" */
2796 /* "\n -L BYTES Don't retrieve new messages >= BYTES. Ignored" */
2797 /* "\n -H LINES Type first LINES of a message. Ignored" */
2798 #define popmaildir_example_usage \
2799 "$ popmaildir -k ~/Maildir -- nc pop.drvv.ru 110 [<password_file]\n" \
2800 "$ popmaildir ~/Maildir -- openssl s_client -quiet -connect pop.gmail.com:995 [<password_file]\n"
2802 #define printenv_trivial_usage \
2804 #define printenv_full_usage "\n\n" \
2805 "Print environment VARIABLEs.\n" \
2806 "If no VARIABLE specified, print all."
2808 #define printf_trivial_usage \
2809 "FORMAT [ARGUMENT]..."
2810 #define printf_full_usage "\n\n" \
2811 "Format and print ARGUMENT(s) according to FORMAT,\n" \
2812 "where FORMAT controls the output exactly as in C printf"
2813 #define printf_example_usage \
2814 "$ printf \"Val=%d\\n\" 5\n" \
2820 #define ps_trivial_usage \
2821 "[-o COL1,COL2=HEADER]" IF_FEATURE_SHOW_THREADS(" [-T]")
2822 #define ps_full_usage "\n\n" \
2823 "Show list of processes\n" \
2825 "\n -o COL1,COL2=HEADER Select columns for display" \
2826 IF_FEATURE_SHOW_THREADS( \
2827 "\n -T Show threads" \
2830 #else /* !ENABLE_DESKTOP */
2832 #if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE
2833 #define USAGE_PS "\nThis version of ps accepts no options"
2835 #define USAGE_PS "\nOptions:"
2838 #define ps_trivial_usage \
2840 #define ps_full_usage "\n\n" \
2841 "Show list of processes\n" \
2844 "\n -Z Show selinux context" \
2846 IF_FEATURE_PS_WIDE( \
2847 "\n w Wide output" \
2850 #endif /* ENABLE_DESKTOP */
2852 #define ps_example_usage \
2854 " PID Uid Gid State Command\n" \
2855 " 1 root root S init\n" \
2856 " 2 root root S [kflushd]\n" \
2857 " 3 root root S [kupdate]\n" \
2858 " 4 root root S [kpiod]\n" \
2859 " 5 root root S [kswapd]\n" \
2860 " 742 andersen andersen S [bash]\n" \
2861 " 743 andersen andersen S -bash\n" \
2862 " 745 root root S [getty]\n" \
2863 " 2990 andersen andersen R ps\n" \
2865 #define pscan_trivial_usage \
2866 "[-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST"
2867 #define pscan_full_usage "\n\n" \
2868 "Scan a host, print all open ports\n" \
2870 "\n -c Show closed ports too" \
2871 "\n -b Show blocked ports too" \
2872 "\n -p Scan from this port (default 1)" \
2873 "\n -P Scan up to this port (default 1024)" \
2874 "\n -t Timeout (default 5000 ms)" \
2875 "\n -T Minimum rtt (default 5 ms, increase for congested hosts)" \
2877 #define pwd_trivial_usage \
2879 #define pwd_full_usage "\n\n" \
2880 "Print the full filename of the current working directory"
2881 #define pwd_example_usage \
2885 #define raidautorun_trivial_usage \
2887 #define raidautorun_full_usage "\n\n" \
2888 "Tell the kernel to automatically search and start RAID arrays"
2889 #define raidautorun_example_usage \
2890 "$ raidautorun /dev/md0"
2892 #define rdate_trivial_usage \
2894 #define rdate_full_usage "\n\n" \
2895 "Get and possibly set the system date and time from a remote HOST\n" \
2897 "\n -s Set the system date and time (default)" \
2898 "\n -p Print the date and time" \
2900 #define rdev_trivial_usage \
2902 #define rdev_full_usage "\n\n" \
2903 "Print the device node associated with the filesystem mounted at '/'"
2904 #define rdev_example_usage \
2906 "/dev/mtdblock9 /\n"
2908 #define readahead_trivial_usage \
2910 #define readahead_full_usage "\n\n" \
2911 "Preload FILEs to RAM"
2913 #define readlink_trivial_usage \
2914 IF_FEATURE_READLINK_FOLLOW("[-fnv] ") "FILE"
2915 #define readlink_full_usage "\n\n" \
2916 "Display the value of a symlink" \
2917 IF_FEATURE_READLINK_FOLLOW( "\n" \
2919 "\n -f Canonicalize by following all symlinks" \
2920 "\n -n Don't add newline" \
2924 #define readprofile_trivial_usage \
2926 #define readprofile_full_usage "\n\n" \
2928 "\n -m mapfile (Default: /boot/System.map)" \
2929 "\n -p profile (Default: /proc/profile)" \
2930 "\n -M NUM Set the profiling multiplier to NUM" \
2931 "\n -i Print only info about the sampling step" \
2933 "\n -a Print all symbols, even if count is 0" \
2934 "\n -b Print individual histogram-bin counts" \
2935 "\n -s Print individual counters within functions" \
2936 "\n -r Reset all the counters (root only)" \
2937 "\n -n Disable byte order auto-detection" \
2939 #define realpath_trivial_usage \
2941 #define realpath_full_usage "\n\n" \
2942 "Return the absolute pathnames of given FILE"
2944 #define reformime_trivial_usage \
2945 "[OPTIONS] [FILE]..."
2946 #define reformime_full_usage "\n\n" \
2947 "Parse MIME-encoded message\n" \
2949 "\n -x PREFIX Extract content of MIME sections to files" \
2950 "\n -X PROG ARGS Filter content of MIME sections through PROG" \
2951 "\n Must be the last option" \
2953 "\nOther options are silently ignored" \
2955 #define scriptreplay_trivial_usage \
2956 "timingfile [typescript [divisor]]"
2957 #define scriptreplay_full_usage "\n\n" \
2958 "Play back typescripts, using timing information"
2960 #define reset_trivial_usage \
2962 #define reset_full_usage "\n\n" \
2965 #define resize_trivial_usage \
2967 #define resize_full_usage "\n\n" \
2970 #define restorecon_trivial_usage \
2971 "[-iFnRv] [-e EXCLUDEDIR]... [-o FILE] [-f FILE]"
2972 #define restorecon_full_usage "\n\n" \
2973 "Reset security contexts of files in pathname\n" \
2974 "\n -i Ignore files that don't exist" \
2975 "\n -f FILE File with list of files to process" \
2976 "\n -e DIR Directory to exclude" \
2977 "\n -R,-r Recurse" \
2978 "\n -n Don't change any file labels" \
2979 "\n -o FILE Save list of files with incorrect context" \
2981 "\n -vv Show changed labels" \
2982 "\n -F Force reset of context to match file_context" \
2983 "\n for customizable files, or the user section," \
2984 "\n if it has changed" \
2986 #define rfkill_trivial_usage \
2987 "COMMAND [INDEX|TYPE]"
2988 #define rfkill_full_usage "\n\n" \
2989 "Enable/disable wireless devices\n" \
2991 "\n list [INDEX|TYPE] List current state" \
2992 "\n block INDEX|TYPE Disable device" \
2993 "\n unblock INDEX|TYPE Enable device" \
2995 "\n TYPE: all, wlan(wifi), bluetooth, uwb(ultrawideband)," \
2996 "\n wimax, wwan, gps, fm" \
2998 #define rm_trivial_usage \
3000 #define rm_full_usage "\n\n" \
3001 "Remove (unlink) FILEs\n" \
3003 "\n -i Always prompt before removing" \
3004 "\n -f Never prompt" \
3005 "\n -R,-r Recurse" \
3007 #define rm_example_usage \
3008 "$ rm -rf /tmp/foo\n"
3010 #define rmdir_trivial_usage \
3011 "[OPTIONS] DIRECTORY..."
3012 #define rmdir_full_usage "\n\n" \
3013 "Remove DIRECTORY if it is empty\n" \
3015 IF_FEATURE_RMDIR_LONG_OPTIONS( \
3016 "\n -p|--parents Include parents" \
3017 "\n --ignore-fail-on-non-empty" \
3019 IF_NOT_FEATURE_RMDIR_LONG_OPTIONS( \
3020 "\n -p Include parents" \
3023 #define rmdir_example_usage \
3024 "# rmdir /tmp/foo\n"
3026 #define route_trivial_usage \
3027 "[{add|del|delete}]"
3028 #define route_full_usage "\n\n" \
3029 "Edit kernel routing tables\n" \
3031 "\n -n Don't resolve names" \
3032 "\n -e Display other/more information" \
3033 "\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family" \
3035 #define rpm_trivial_usage \
3036 "-i PACKAGE.rpm; rpm -qp[ildc] PACKAGE.rpm"
3037 #define rpm_full_usage "\n\n" \
3038 "Manipulate RPM packages\n" \
3040 "\n -i Install package" \
3041 "\n -qp Query package" \
3043 "\n -i Show information" \
3044 "\n -l List contents" \
3045 "\n -d List documents" \
3046 "\n -c List config files" \
3048 #define rpm2cpio_trivial_usage \
3050 #define rpm2cpio_full_usage "\n\n" \
3051 "Output a cpio archive of the rpm file"
3053 #define rtcwake_trivial_usage \
3054 "[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]"
3055 #define rtcwake_full_usage "\n\n" \
3056 "Enter a system sleep state until specified wakeup time\n" \
3058 "\n -a,--auto Read clock mode from adjtime" \
3059 "\n -l,--local Clock is set to local time" \
3060 "\n -u,--utc Clock is set to UTC time" \
3061 "\n -d,--device=DEV Specify the RTC device" \
3062 "\n -m,--mode=MODE Set the sleep state (default: standby)" \
3063 "\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \
3064 "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \
3067 "\n -a Read clock mode from adjtime" \
3068 "\n -l Clock is set to local time" \
3069 "\n -u Clock is set to UTC time" \
3070 "\n -d DEV Specify the RTC device" \
3071 "\n -m MODE Set the sleep state (default: standby)" \
3072 "\n -s SEC Set the timeout in SEC seconds from now" \
3073 "\n -t TIME Set the timeout to TIME seconds from epoch" \
3076 #define runcon_trivial_usage \
3077 "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG ARGS\n" \
3078 "runcon CONTEXT PROG ARGS"
3079 #define runcon_full_usage "\n\n" \
3080 "Run PROG in a different security context\n" \
3081 "\n CONTEXT Complete security context\n" \
3082 IF_FEATURE_RUNCON_LONG_OPTIONS( \
3083 "\n -c,--compute Compute process transition context before modifying" \
3084 "\n -t,--type=TYPE Type (for same role as parent)" \
3085 "\n -u,--user=USER User identity" \
3086 "\n -r,--role=ROLE Role" \
3087 "\n -l,--range=RNG Levelrange" \
3089 IF_NOT_FEATURE_RUNCON_LONG_OPTIONS( \
3090 "\n -c Compute process transition context before modifying" \
3091 "\n -t TYPE Type (for same role as parent)" \
3092 "\n -u USER User identity" \
3094 "\n -l RNG Levelrange" \
3097 #define run_parts_trivial_usage \
3098 "[-t] "IF_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
3099 #define run_parts_full_usage "\n\n" \
3100 "Run a bunch of scripts in DIRECTORY\n" \
3102 "\n -t Print what would be run, but don't actually run anything" \
3103 "\n -a ARG Pass ARG as argument for every program" \
3104 "\n -u MASK Set the umask to MASK before running every program" \
3105 IF_FEATURE_RUN_PARTS_FANCY( \
3106 "\n -l Print names of all matching files even if they are not executable" \
3109 #define run_parts_example_usage \
3110 "$ run-parts -a start /etc/init.d\n" \
3111 "$ run-parts -a stop=now /etc/init.d\n\n" \
3112 "Let's assume you have a script foo/dosomething:\n" \
3114 "for i in $*; do eval $i; done; unset i\n" \
3115 "case \"$1\" in\n" \
3116 "start*) echo starting something;;\n" \
3117 "stop*) set -x; shutdown -h $stop;;\n" \
3119 "Running this yields:\n" \
3120 "$run-parts -a stop=+4m foo/\n" \
3123 #define runlevel_trivial_usage \
3125 #define runlevel_full_usage "\n\n" \
3126 "Find the current and previous system runlevel\n" \
3128 "If no utmp FILE exists or if no runlevel record can be found,\n" \
3130 #define runlevel_example_usage \
3131 "$ runlevel /var/run/utmp\n" \
3134 #define runsv_trivial_usage \
3136 #define runsv_full_usage "\n\n" \
3137 "Start and monitor a service and optionally an appendant log service"
3139 #define runsvdir_trivial_usage \
3140 "[-P] [-s SCRIPT] DIR"
3141 #define runsvdir_full_usage "\n\n" \
3142 "Start a runsv process for each subdirectory. If it exits, restart it.\n" \
3143 "\n -P Put each runsv in a new session" \
3144 "\n -s SCRIPT Run SCRIPT <signo> after signal is processed" \
3146 #define rx_trivial_usage \
3148 #define rx_full_usage "\n\n" \
3149 "Receive a file using the xmodem protocol"
3150 #define rx_example_usage \
3153 #define script_trivial_usage \
3154 "[-afq" IF_SCRIPTREPLAY("t") "] [-c PROG] [OUTFILE]"
3155 #define script_full_usage "\n\n" \
3157 "\n -a Append output" \
3158 "\n -c PROG Run PROG, not shell" \
3159 "\n -f Flush output after each write" \
3162 "\n -t Send timing to stderr" \
3165 #define sed_trivial_usage \
3166 "[-efinr] SED_CMD [FILE]..."
3167 #define sed_full_usage "\n\n" \
3169 "\n -e CMD Add CMD to sed commands to be executed" \
3170 "\n -f FILE Add FILE contents to sed commands to be executed" \
3171 "\n -i Edit files in-place (else sends result to stdout)" \
3172 "\n -n Suppress automatic printing of pattern space" \
3173 "\n -r Use extended regex syntax" \
3175 "\nIf no -e or -f, the first non-option argument is the sed command string." \
3176 "\nRemaining arguments are input files (stdin if none)."
3178 #define sed_example_usage \
3179 "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
3182 #define selinuxenabled_trivial_usage NOUSAGE_STR
3183 #define selinuxenabled_full_usage ""
3185 #define seq_trivial_usage \
3186 "[-w] [-s SEP] [FIRST [INC]] LAST"
3187 #define seq_full_usage "\n\n" \
3188 "Print numbers from FIRST to LAST, in steps of INC.\n" \
3189 "FIRST, INC default to 1.\n" \
3191 "\n -w Pad to last with leading zeros" \
3192 "\n -s SEP String separator" \
3194 #define sestatus_trivial_usage \
3196 #define sestatus_full_usage "\n\n" \
3198 "\n -b Display current state of booleans" \
3200 #define setconsole_trivial_usage \
3201 "[-r" IF_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]"
3202 #define setconsole_full_usage "\n\n" \
3203 "Redirect system console output to DEVICE (default: /dev/tty)\n" \
3205 "\n -r Reset output to /dev/console" \
3207 #define setenforce_trivial_usage \
3208 "[Enforcing | Permissive | 1 | 0]"
3209 #define setenforce_full_usage ""
3211 #define setfiles_trivial_usage \
3212 "[-dnpqsvW] [-e DIR]... [-o FILE] [-r alt_root_path]" \
3213 IF_FEATURE_SETFILES_CHECK_OPTION( \
3214 " [-c policyfile] spec_file" \
3217 #define setfiles_full_usage "\n\n" \
3218 "Reset file contexts under pathname according to spec_file\n" \
3219 IF_FEATURE_SETFILES_CHECK_OPTION( \
3220 "\n -c FILE Check the validity of the contexts against the specified binary policy" \
3222 "\n -d Show which specification matched each file" \
3223 "\n -l Log changes in file labels to syslog" \
3224 "\n -n Don't change any file labels" \
3225 "\n -q Suppress warnings" \
3226 "\n -r DIR Use an alternate root path" \
3227 "\n -e DIR Exclude DIR" \
3228 "\n -F Force reset of context to match file_context for customizable files" \
3229 "\n -o FILE Save list of files with incorrect context" \
3230 "\n -s Take a list of files from stdin (instead of command line)" \
3231 "\n -v Show changes in file labels, if type or role are changing" \
3232 "\n -vv Show changes in file labels, if type, role, or user are changing" \
3233 "\n -W Display warnings about entries that had no matching files" \
3235 #define setfont_trivial_usage \
3236 "FONT [-m MAPFILE] [-C TTY]"
3237 #define setfont_full_usage "\n\n" \
3238 "Load a console font\n" \
3240 "\n -m MAPFILE Load console screen map" \
3241 "\n -C TTY Affect TTY instead of /dev/tty" \
3243 #define setfont_example_usage \
3244 "$ setfont -m koi8-r /etc/i18n/fontname\n"
3246 #define setkeycodes_trivial_usage \
3247 "SCANCODE KEYCODE..."
3248 #define setkeycodes_full_usage "\n\n" \
3249 "Set entries into the kernel's scancode-to-keycode map,\n" \
3250 "allowing unusual keyboards to generate usable keycodes.\n\n" \
3251 "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
3252 "and KEYCODE is given in decimal." \
3254 #define setkeycodes_example_usage \
3255 "$ setkeycodes e030 127\n"
3257 #define setlogcons_trivial_usage \
3259 #define setlogcons_full_usage "\n\n" \
3260 "Redirect the kernel output to console N (0 for current)"
3262 #define setsebool_trivial_usage \
3265 #define setsebool_full_usage "\n\n" \
3266 "Change boolean setting"
3268 #define setsid_trivial_usage \
3270 #define setsid_full_usage "\n\n" \
3271 "Run PROG in a new session. PROG will have no controlling terminal\n" \
3272 "and will not be affected by keyboard signals (Ctrl-C etc).\n" \
3273 "See setsid(2) for details." \
3275 #define last_trivial_usage \
3276 ""IF_FEATURE_LAST_FANCY("[-HW] [-f FILE]")
3277 #define last_full_usage "\n\n" \
3278 "Show listing of the last users that logged into the system" \
3279 IF_FEATURE_LAST_FANCY( "\n" \
3281 /* "\n -H Show header line" */ \
3282 "\n -W Display with no host column truncation" \
3283 "\n -f FILE Read from FILE instead of /var/log/wtmp" \
3286 #define showkey_trivial_usage \
3288 #define showkey_full_usage "\n\n" \
3289 "Show keys pressed\n" \
3291 "\n -a Display decimal/octal/hex values of the keys" \
3292 "\n -k Display interpreted keycodes (default)" \
3293 "\n -s Display raw scan-codes" \
3295 #define slattach_trivial_usage \
3296 "[-cehmLF] [-s SPEED] [-p PROTOCOL] DEVICE"
3297 #define slattach_full_usage "\n\n" \
3298 "Attach network interface(s) to serial line(s)\n" \
3300 "\n -p PROT Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \
3301 "\n -s SPD Set line speed" \
3302 "\n -e Exit after initializing device" \
3303 "\n -h Exit when the carrier is lost" \
3304 "\n -c PROG Run PROG when the line is hung up" \
3305 "\n -m Do NOT initialize the line in raw 8 bits mode" \
3306 "\n -L Enable 3-wire operation" \
3307 "\n -F Disable RTS/CTS flow control" \
3309 #define sleep_trivial_usage \
3310 IF_FEATURE_FANCY_SLEEP("[") "N" IF_FEATURE_FANCY_SLEEP("]...")
3311 #define sleep_full_usage "\n\n" \
3312 IF_NOT_FEATURE_FANCY_SLEEP("Pause for N seconds") \
3313 IF_FEATURE_FANCY_SLEEP( \
3314 "Pause for a time equal to the total of the args given, where each arg can\n" \
3315 "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays")
3316 #define sleep_example_usage \
3318 "[2 second delay results]\n" \
3319 IF_FEATURE_FANCY_SLEEP( \
3320 "$ sleep 1d 3h 22m 8s\n" \
3321 "[98528 second delay results]\n")
3323 #define sort_trivial_usage \
3325 IF_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \
3327 #define sort_full_usage "\n\n" \
3328 "Sort lines of text\n" \
3330 IF_FEATURE_SORT_BIG( \
3331 "\n -b Ignore leading blanks" \
3332 "\n -c Check whether input is sorted" \
3333 "\n -d Dictionary order (blank or alphanumeric only)" \
3334 "\n -f Ignore case" \
3335 "\n -g General numerical sort" \
3336 "\n -i Ignore unprintable characters" \
3338 "\n -M Sort month" \
3340 "\n -n Sort numbers" \
3341 IF_FEATURE_SORT_BIG( \
3342 "\n -o Output to file" \
3343 "\n -k Sort by key" \
3344 "\n -t CHAR Key separator" \
3346 "\n -r Reverse sort order" \
3347 IF_FEATURE_SORT_BIG( \
3348 "\n -s Stable (don't sort ties alphabetically)" \
3350 "\n -u Suppress duplicate lines" \
3351 IF_FEATURE_SORT_BIG( \
3352 "\n -z Lines are terminated by NUL, not newline" \
3353 "\n -mST Ignored for GNU compatibility") \
3355 #define sort_example_usage \
3356 "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
3363 IF_FEATURE_SORT_BIG( \
3364 "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \
3371 #define split_trivial_usage \
3372 "[OPTIONS] [INPUT [PREFIX]]"
3373 #define split_full_usage "\n\n" \
3375 "\n -b N[k|m] Split by N (kilo|mega)bytes" \
3376 "\n -l N Split by N lines" \
3377 "\n -a N Use N letters as suffix" \
3379 #define split_example_usage \
3380 "$ split TODO foo\n" \
3381 "$ cat TODO | split -a 2 -l 2 TODO_\n"
3383 #define start_stop_daemon_trivial_usage \
3384 "[OPTIONS] [-S|-K] ... [-- ARGS...]"
3385 #define start_stop_daemon_full_usage "\n\n" \
3386 "Search for matching processes, and then\n" \
3387 "-K: stop all matching processes.\n" \
3388 "-S: start a process unless a matching process is found.\n" \
3389 IF_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
3390 "\nProcess matching:" \
3391 "\n -u,--user USERNAME|UID Match only this user's processes" \
3392 "\n -n,--name NAME Match processes with NAME" \
3393 "\n in comm field in /proc/PID/stat" \
3394 "\n -x,--exec EXECUTABLE Match processes with this command" \
3395 "\n in /proc/PID/cmdline" \
3396 "\n -p,--pidfile FILE Match a process with PID from the file" \
3397 "\n All specified conditions must match" \
3399 "\n -x,--exec EXECUTABLE Program to run" \
3400 "\n -a,--startas NAME Zeroth argument" \
3401 "\n -b,--background Background" \
3402 IF_FEATURE_START_STOP_DAEMON_FANCY( \
3403 "\n -N,--nicelevel N Change nice level" \
3405 "\n -c,--chuid USER[:[GRP]] Change to user/group" \
3406 "\n -m,--make-pidfile Write PID to the pidfile specified by -p" \
3408 "\n -s,--signal SIG Signal to send" \
3409 "\n -t,--test Match only, exit with 0 if a process is found" \
3411 IF_FEATURE_START_STOP_DAEMON_FANCY( \
3412 "\n -o,--oknodo Exit with status 0 if nothing is done" \
3413 "\n -v,--verbose Verbose" \
3415 "\n -q,--quiet Quiet" \
3417 IF_NOT_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
3418 "\nProcess matching:" \
3419 "\n -u USERNAME|UID Match only this user's processes" \
3420 "\n -n NAME Match processes with NAME" \
3421 "\n in comm field in /proc/PID/stat" \
3422 "\n -x EXECUTABLE Match processes with this command" \
3423 "\n command in /proc/PID/cmdline" \
3424 "\n -p FILE Match a process with PID from the file" \
3425 "\n All specified conditions must match" \
3427 "\n -x EXECUTABLE Program to run" \
3428 "\n -a NAME Zeroth argument" \
3429 "\n -b Background" \
3430 IF_FEATURE_START_STOP_DAEMON_FANCY( \
3431 "\n -N N Change nice level" \
3433 "\n -c USER[:[GRP]] Change to user/group" \
3434 "\n -m Write PID to the pidfile specified by -p" \
3436 "\n -s SIG Signal to send" \
3437 "\n -t Match only, exit with 0 if a process is found" \
3439 IF_FEATURE_START_STOP_DAEMON_FANCY( \
3440 "\n -o Exit with status 0 if nothing is done" \
3446 #define stat_trivial_usage \
3448 #define stat_full_usage "\n\n" \
3449 "Display file (default) or filesystem status\n" \
3451 IF_FEATURE_STAT_FORMAT( \
3452 "\n -c fmt Use the specified format" \
3454 "\n -f Display filesystem status" \
3455 "\n -L Follow links" \
3456 "\n -t Display info in terse form" \
3458 "\n -Z Print security context" \
3460 IF_FEATURE_STAT_FORMAT( \
3461 "\n\nValid format sequences for files:\n" \
3462 " %a Access rights in octal\n" \
3463 " %A Access rights in human readable form\n" \
3464 " %b Number of blocks allocated (see %B)\n" \
3465 " %B The size in bytes of each block reported by %b\n" \
3466 " %d Device number in decimal\n" \
3467 " %D Device number in hex\n" \
3468 " %f Raw mode in hex\n" \
3470 " %g Group ID of owner\n" \
3471 " %G Group name of owner\n" \
3472 " %h Number of hard links\n" \
3473 " %i Inode number\n" \
3475 " %N File name, with -> TARGET if symlink\n" \
3476 " %o I/O block size\n" \
3477 " %s Total size, in bytes\n" \
3478 " %t Major device type in hex\n" \
3479 " %T Minor device type in hex\n" \
3480 " %u User ID of owner\n" \
3481 " %U User name of owner\n" \
3482 " %x Time of last access\n" \
3483 " %X Time of last access as seconds since Epoch\n" \
3484 " %y Time of last modification\n" \
3485 " %Y Time of last modification as seconds since Epoch\n" \
3486 " %z Time of last change\n" \
3487 " %Z Time of last change as seconds since Epoch\n" \
3488 "\nValid format sequences for file systems:\n" \
3489 " %a Free blocks available to non-superuser\n" \
3490 " %b Total data blocks in file system\n" \
3491 " %c Total file nodes in file system\n" \
3492 " %d Free file nodes in file system\n" \
3493 " %f Free blocks in file system\n" \
3495 " %C Security context in selinux\n" \
3497 " %i File System ID in hex\n" \
3498 " %l Maximum length of filenames\n" \
3500 " %s Block size (for faster transfer)\n" \
3501 " %S Fundamental block size (for block counts)\n" \
3502 " %t Type in hex\n" \
3503 " %T Type in human readable form" \
3506 #define strings_trivial_usage \
3507 "[-afo] [-n LEN] [FILE]..."
3508 #define strings_full_usage "\n\n" \
3509 "Display printable strings in a binary file\n" \
3511 "\n -a Scan whole file (default)" \
3512 "\n -f Precede strings with filenames" \
3513 "\n -n LEN At least LEN characters form a string (default 4)" \
3514 "\n -o Precede strings with decimal offsets" \
3516 #define stty_trivial_usage \
3517 "[-a|g] [-F DEVICE] [SETTING]..."
3518 #define stty_full_usage "\n\n" \
3519 "Without arguments, prints baud rate, line discipline,\n" \
3520 "and deviations from stty sane\n" \
3522 "\n -F DEVICE Open device instead of stdin" \
3523 "\n -a Print all current settings in human-readable form" \
3524 "\n -g Print in stty-readable form" \
3525 "\n [SETTING] See manpage" \
3527 #define sulogin_trivial_usage \
3529 #define sulogin_full_usage "\n\n" \
3530 "Single user login\n" \
3534 #define sum_trivial_usage \
3536 #define sum_full_usage "\n\n" \
3537 "Checksum and count the blocks in a file\n" \
3539 "\n -r Use BSD sum algorithm (1K blocks)" \
3540 "\n -s Use System V sum algorithm (512byte blocks)" \
3542 #define sv_trivial_usage \
3543 "[-v] [-w SEC] CMD SERVICE_DIR..."
3544 #define sv_full_usage "\n\n" \
3545 "Control services monitored by runsv supervisor.\n" \
3546 "Commands (only first character is enough):\n" \
3548 "status: query service status\n" \
3549 "up: if service isn't running, start it. If service stops, restart it\n" \
3550 "once: like 'up', but if service stops, don't restart it\n" \
3551 "down: send TERM and CONT signals. If ./run exits, start ./finish\n" \
3552 " if it exists. After it stops, don't restart service\n" \
3553 "exit: send TERM and CONT signals to service and log service. If they exit,\n" \
3554 " runsv exits too\n" \
3555 "pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \
3556 "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \
3558 #define svlogd_trivial_usage \
3559 "[-ttv] [-r C] [-R CHARS] [-l MATCHLEN] [-b BUFLEN] DIR..."
3560 #define svlogd_full_usage "\n\n" \
3561 "Continuously read log data from stdin, optionally\n" \
3562 "filter log messages, and write the data to one or more automatically\n" \
3565 #define swapoff_trivial_usage \
3567 #define swapoff_full_usage "\n\n" \
3568 "Stop swapping on DEVICE\n" \
3570 "\n -a Stop swapping on all swap devices" \
3572 #define swapon_trivial_usage \
3573 "[-a]" IF_FEATURE_SWAPON_PRI(" [-p PRI]") " [DEVICE]"
3574 #define swapon_full_usage "\n\n" \
3575 "Start swapping on DEVICE\n" \
3577 "\n -a Start swapping on all swap devices" \
3578 IF_FEATURE_SWAPON_PRI( \
3579 "\n -p PRI Set swap device priority" \
3582 #define switch_root_trivial_usage \
3583 "[-c /dev/console] NEW_ROOT NEW_INIT [ARGS]"
3584 #define switch_root_full_usage "\n\n" \
3585 "Free initramfs and switch to another root fs:\n" \
3586 "chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,\n" \
3587 "execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.\n" \
3589 "\n -c DEV Reopen stdio to DEV after switch" \
3591 #define sync_trivial_usage \
3593 #define sync_full_usage "\n\n" \
3594 "Write all buffered blocks to disk"
3596 #define fsync_trivial_usage \
3598 #define fsync_full_usage "\n\n" \
3599 "Write files' buffered blocks to disk\n" \
3601 "\n -d Avoid syncing metadata"
3603 #define sysctl_trivial_usage \
3604 "[OPTIONS] [VALUE]..."
3605 #define sysctl_full_usage "\n\n" \
3606 "Configure kernel parameters at runtime\n" \
3608 "\n -n Don't print key names" \
3609 "\n -e Don't warn about unknown keys" \
3610 "\n -w Change sysctl setting" \
3611 "\n -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)" \
3612 "\n -a Display all values" \
3613 "\n -A Display all values in table form" \
3615 #define sysctl_example_usage \
3616 "sysctl [-n] [-e] variable...\n" \
3617 "sysctl [-n] [-e] -w variable=value...\n" \
3618 "sysctl [-n] [-e] -a\n" \
3619 "sysctl [-n] [-e] -p file (default /etc/sysctl.conf)\n" \
3620 "sysctl [-n] [-e] -A\n"
3622 #define syslogd_trivial_usage \
3624 #define syslogd_full_usage "\n\n" \
3625 "System logging utility.\n" \
3626 "This version of syslogd ignores /etc/syslog.conf\n" \
3628 "\n -n Run in foreground" \
3629 "\n -O FILE Log to given file (default:/var/log/messages)" \
3630 "\n -l N Set local log level" \
3631 "\n -S Smaller logging output" \
3632 IF_FEATURE_ROTATE_LOGFILE( \
3633 "\n -s SIZE Max size (KB) before rotate (default:200KB, 0=off)" \
3634 "\n -b N N rotated logs to keep (default:1, max=99, 0=purge)") \
3635 IF_FEATURE_REMOTE_LOG( \
3636 "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
3637 "\n -L Log locally and via network (default is network only if -R)") \
3638 IF_FEATURE_SYSLOGD_DUP( \
3639 "\n -D Drop duplicates") \
3640 IF_FEATURE_IPC_SYSLOG( \
3641 "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") \
3642 /* NB: -Csize shouldn't have space (because size is optional) */
3643 /* "\n -m MIN Minutes between MARK lines (default:20, 0=off)" */
3645 #define syslogd_example_usage \
3646 "$ syslogd -R masterlog:514\n" \
3647 "$ syslogd -R 192.168.1.1:601\n"
3649 #define tac_trivial_usage \
3651 #define tac_full_usage "\n\n" \
3652 "Concatenate FILEs and print them in reverse"
3654 #define taskset_trivial_usage \
3655 "[-p] [MASK] [PID | PROG ARGS]"
3656 #define taskset_full_usage "\n\n" \
3657 "Set or get CPU affinity\n" \
3659 "\n -p Operate on an existing PID" \
3661 #define taskset_example_usage \
3662 "$ taskset 0x7 ./dgemm_test&\n" \
3663 "$ taskset -p 0x1 $!\n" \
3664 "pid 4790's current affinity mask: 7\n" \
3665 "pid 4790's new affinity mask: 1\n" \
3666 "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
3667 "pid 6671's current affinity mask: 1\n" \
3668 "pid 6671's new affinity mask: 1\n" \
3669 "$ taskset -p 1\n" \
3670 "pid 1's current affinity mask: 3\n"
3672 #define tee_trivial_usage \
3674 #define tee_full_usage "\n\n" \
3675 "Copy stdin to each FILE, and also to stdout\n" \
3677 "\n -a Append to the given FILEs, don't overwrite" \
3678 "\n -i Ignore interrupt signals (SIGINT)" \
3680 #define tee_example_usage \
3681 "$ echo \"Hello\" | tee /tmp/foo\n" \
3682 "$ cat /tmp/foo\n" \
3685 #if ENABLE_FEATURE_TELNET_AUTOLOGIN
3686 #define telnet_trivial_usage \
3687 "[-a] [-l USER] HOST [PORT]"
3688 #define telnet_full_usage "\n\n" \
3689 "Connect to telnet server\n" \
3691 "\n -a Automatic login with $USER variable" \
3692 "\n -l USER Automatic login as USER" \
3695 #define telnet_trivial_usage \
3697 #define telnet_full_usage "\n\n" \
3698 "Connect to telnet server"
3701 #define telnetd_trivial_usage \
3703 #define telnetd_full_usage "\n\n" \
3704 "Handle incoming telnet connections" \
3705 IF_NOT_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \
3707 "\n -l LOGIN Exec LOGIN on connect" \
3708 "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
3709 "\n -K Close connection as soon as login exits" \
3710 "\n (normally wait until all programs close slave pty)" \
3711 IF_FEATURE_TELNETD_STANDALONE( \
3712 "\n -p PORT Port to listen on" \
3713 "\n -b ADDR[:PORT] Address to bind to" \
3714 "\n -F Run in foreground" \
3715 "\n -i Inetd mode" \
3716 IF_FEATURE_TELNETD_INETD_WAIT( \
3717 "\n -w SEC Inetd 'wait' mode, linger time SEC" \
3718 "\n -S Log to syslog (implied by -i or without -F and -w)" \
3722 /* "test --help" does not print help (POSIX compat), only "[ --help" does.
3723 * We display "<applet> EXPRESSION ]" here (not "<applet> EXPRESSION")
3724 * Unfortunately, it screws up generated BusyBox.html. TODO. */
3725 #define test_trivial_usage \
3727 #define test_full_usage "\n\n" \
3728 "Check file types, compare values etc. Return a 0/1 exit code\n" \
3729 "depending on logical value of EXPRESSION"
3730 #define test_example_usage \
3731 "$ test 1 -eq 2\n" \
3734 "$ test 1 -eq 1\n" \
3740 "$ [ -d /junk ]\n" \
3744 #define tc_trivial_usage \
3745 /*"[OPTIONS] "*/"OBJECT CMD [dev STRING]"
3746 #define tc_full_usage "\n\n" \
3747 "OBJECT: {qdisc|class|filter}\n" \
3748 "CMD: {add|del|change|replace|show}\n" \
3750 "qdisc [ handle QHANDLE ] [ root |"IF_FEATURE_TC_INGRESS(" ingress |")" parent CLASSID ]\n" \
3751 /* "[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
3752 " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
3753 " QDISC_KIND := { [p|b]fifo | tbf | prio | cbq | red | etc. }\n" \
3754 "qdisc show [ dev STRING ]"IF_FEATURE_TC_INGRESS(" [ingress]")"\n" \
3755 "class [ classid CLASSID ] [ root | parent CLASSID ]\n" \
3756 " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
3757 "class show [ dev STRING ] [ root | parent CLASSID ]\n" \
3758 "filter [ pref PRIO ] [ protocol PROTO ]\n" \
3759 /* "\t[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
3760 " [ root | classid CLASSID ] [ handle FILTERID ]\n" \
3761 " [ [ FILTER_TYPE ] [ help | OPTIONS ] ]\n" \
3762 "filter show [ dev STRING ] [ root | parent CLASSID ]"
3764 #define tcpsvd_trivial_usage \
3765 "[-hEv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] IP PORT PROG"
3766 /* with not-implemented options: */
3767 /* "[-hpEvv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] [-i DIR|-x CDB] [-t SEC] IP PORT PROG" */
3768 #define tcpsvd_full_usage "\n\n" \
3769 "Create TCP socket, bind to IP:PORT and listen\n" \
3770 "for incoming connection. Run PROG for each connection.\n" \
3771 "\n IP IP to listen on. '0' = all" \
3772 "\n PORT Port to listen on" \
3773 "\n PROG ARGS Program to run" \
3774 "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
3775 "\n -u USER[:GRP] Change to user/group after bind" \
3776 "\n -c N Handle up to N connections simultaneously" \
3777 "\n -b N Allow a backlog of approximately N TCP SYNs" \
3778 "\n -C N[:MSG] Allow only up to N connections from the same IP." \
3779 "\n New connections from this IP address are closed" \
3780 "\n immediately. MSG is written to the peer before close" \
3781 "\n -h Look up peer's hostname" \
3782 "\n -E Don't set up environment variables" \
3785 #define udpsvd_trivial_usage \
3786 "[-hEv] [-c N] [-u USER] [-l NAME] IP PORT PROG"
3787 #define udpsvd_full_usage "\n\n" \
3788 "Create UDP socket, bind to IP:PORT and wait\n" \
3789 "for incoming packets. Run PROG for each packet,\n" \
3790 "redirecting all further packets with same peer ip:port to it.\n" \
3791 "\n IP IP to listen on. '0' = all" \
3792 "\n PORT Port to listen on" \
3793 "\n PROG ARGS Program to run" \
3794 "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
3795 "\n -u USER[:GRP] Change to user/group after bind" \
3796 "\n -c N Handle up to N connections simultaneously" \
3797 "\n -h Look up peer's hostname" \
3798 "\n -E Don't set up environment variables" \
3801 #define tftp_trivial_usage \
3802 "[OPTIONS] HOST [PORT]"
3803 #define tftp_full_usage "\n\n" \
3804 "Transfer a file from/to tftp server\n" \
3806 "\n -l FILE Local FILE" \
3807 "\n -r FILE Remote FILE" \
3808 IF_FEATURE_TFTP_GET( \
3811 IF_FEATURE_TFTP_PUT( \
3814 IF_FEATURE_TFTP_BLOCKSIZE( \
3815 "\n -b SIZE Transfer blocks of SIZE octets" \
3818 #define tftpd_trivial_usage \
3819 "[-cr] [-u USER] [DIR]"
3820 #define tftpd_full_usage "\n\n" \
3821 "Transfer a file on tftp client's request\n" \
3823 "tftpd should be used as an inetd service.\n" \
3824 "tftpd's line for inetd.conf:\n" \
3825 " 69 dgram udp nowait root tftpd tftpd /files/to/serve\n" \
3826 "It also can be ran from udpsvd:\n" \
3827 " udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve\n" \
3829 "\n -r Prohibit upload" \
3830 "\n -c Allow file creation via upload" \
3831 "\n -u Access files as USER" \
3833 #define time_trivial_usage \
3835 #define time_full_usage "\n\n" \
3836 "Run PROG, display resource usage when it exits\n" \
3840 #define timeout_trivial_usage \
3841 "[-t SECS] [-s SIG] PROG ARGS"
3842 #define timeout_full_usage "\n\n" \
3843 "Runs PROG. Sends SIG to it if it is not gone in SECS seconds.\n" \
3844 "Defaults: SECS: 10, SIG: TERM." \
3846 #define top_trivial_usage \
3847 "[-b] [-nCOUNT] [-dSECONDS]" IF_FEATURE_TOPMEM(" [-m]")
3848 #define top_full_usage "\n\n" \
3849 "Provide a view of process activity in real time.\n" \
3850 "Read the status of all processes from /proc each SECONDS\n" \
3851 "and display a screenful of them." \
3852 //TODO: add options and keyboard commands
3854 #define tr_trivial_usage \
3855 "[-cds] STRING1 [STRING2]"
3856 #define tr_full_usage "\n\n" \
3857 "Translate, squeeze, or delete characters from stdin, writing to stdout\n" \
3859 "\n -c Take complement of STRING1" \
3860 "\n -d Delete input characters coded STRING1" \
3861 "\n -s Squeeze multiple output characters of STRING2 into one character" \
3863 #define tr_example_usage \
3864 "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
3867 #define traceroute_trivial_usage \
3868 "[-"IF_TRACEROUTE6("46")"FIldnrv] [-f 1ST_TTL] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
3869 " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-g GATEWAY] [-i IFACE]\n" \
3870 " [-z PAUSE_MSEC] HOST [BYTES]"
3871 #define traceroute_full_usage "\n\n" \
3872 "Trace the route to HOST\n" \
3875 "\n -4,-6 Force IP or IPv6 name resolution" \
3877 "\n -F Set the don't fragment bit" \
3878 "\n -I Use ICMP ECHO instead of UDP datagrams" \
3879 "\n -l Display the TTL value of the returned packet" \
3880 "\n -d Set SO_DEBUG options to socket" \
3881 "\n -n Print numeric addresses" \
3882 "\n -r Bypass routing tables, send directly to HOST" \
3884 "\n -m Max time-to-live (max number of hops)" \
3885 "\n -p Base UDP port number used in probes" \
3886 "\n (default 33434)" \
3887 "\n -q Number of probes per TTL (default 3)" \
3888 "\n -s IP address to use as the source address" \
3889 "\n -t Type-of-service in probe packets (default 0)" \
3890 "\n -w Time in seconds to wait for a response (default 3)" \
3891 "\n -g Loose source route gateway (8 max)" \
3893 #define traceroute6_trivial_usage \
3894 "[-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
3895 " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-i IFACE]\n" \
3897 #define traceroute6_full_usage "\n\n" \
3898 "Trace the route to HOST\n" \
3900 "\n -d Set SO_DEBUG options to socket" \
3901 "\n -n Print numeric addresses" \
3902 "\n -r Bypass routing tables, send directly to HOST" \
3904 "\n -m Max time-to-live (max number of hops)" \
3905 "\n -p Base UDP port number used in probes" \
3906 "\n (default is 33434)" \
3907 "\n -q Number of probes per TTL (default 3)" \
3908 "\n -s IP address to use as the source address" \
3909 "\n -t Type-of-service in probe packets (default 0)" \
3910 "\n -w Time in seconds to wait for a response (default 3)" \
3912 #define true_trivial_usage \
3914 #define true_full_usage "\n\n" \
3915 "Return an exit code of TRUE (0)"
3916 #define true_example_usage \
3921 #define tty_trivial_usage \
3923 #define tty_full_usage "\n\n" \
3924 "Print file name of stdin's terminal" \
3925 IF_INCLUDE_SUSv2( "\n" \
3927 "\n -s Print nothing, only return exit status" \
3929 #define tty_example_usage \
3933 #define ttysize_trivial_usage \
3935 #define ttysize_full_usage "\n\n" \
3936 "Print dimension(s) of stdin's terminal, on error return 80x25"
3938 #define tunctl_trivial_usage \
3939 "[-f device] ([-t name] | -d name)" IF_FEATURE_TUNCTL_UG(" [-u owner] [-g group] [-b]")
3940 #define tunctl_full_usage "\n\n" \
3941 "Create or delete tun interfaces\n" \
3943 "\n -f name tun device (/dev/net/tun)" \
3944 "\n -t name Create iface 'name'" \
3945 "\n -d name Delete iface 'name'" \
3946 IF_FEATURE_TUNCTL_UG( \
3947 "\n -u owner Set iface owner" \
3948 "\n -g group Set iface group" \
3949 "\n -b Brief output" \
3951 #define tunctl_example_usage \
3953 "# tunctl -d tun0\n"
3955 #define udhcpd_trivial_usage \
3956 "[-fS]" IF_FEATURE_UDHCP_PORT(" [-P N]") " [CONFFILE]" \
3958 #define udhcpd_full_usage "\n\n" \
3960 "\n -f Run in foreground" \
3961 "\n -S Log to syslog too" \
3962 IF_FEATURE_UDHCP_PORT( \
3963 "\n -P N Use port N (default 67)" \
3966 #define umount_trivial_usage \
3967 "[OPTIONS] FILESYSTEM|DIRECTORY"
3968 #define umount_full_usage "\n\n" \
3969 "Unmount file systems\n" \
3971 IF_FEATURE_UMOUNT_ALL( \
3972 "\n -a Unmount all file systems" IF_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
3974 IF_FEATURE_MTAB_SUPPORT( \
3975 "\n -n Don't erase /etc/mtab entries" \
3977 "\n -r Try to remount devices as read-only if mount is busy" \
3978 "\n -l Lazy umount (detach filesystem)" \
3979 "\n -f Force umount (i.e., unreachable NFS server)" \
3980 IF_FEATURE_MOUNT_LOOP( \
3981 "\n -d Free loop device if it has been used" \
3984 #define umount_example_usage \
3985 "$ umount /dev/hdc1\n"
3987 #define uname_trivial_usage \
3989 #define uname_full_usage "\n\n" \
3990 "Print system information\n" \
3993 "\n -m The machine (hardware) type" \
3995 "\n -r OS release" \
3996 "\n -s OS name (default)" \
3997 "\n -p Processor type" \
3998 "\n -v OS version" \
4000 #define uname_example_usage \
4002 "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
4004 #define uncompress_trivial_usage \
4006 #define uncompress_full_usage "\n\n" \
4007 "Decompress .Z file[s]\n" \
4009 "\n -c Write to stdout" \
4012 #define unexpand_trivial_usage \
4013 "[-fa][-t N] [FILE]..."
4014 #define unexpand_full_usage "\n\n" \
4015 "Convert spaces to tabs, writing to stdout\n" \
4017 IF_FEATURE_UNEXPAND_LONG_OPTIONS( \
4018 "\n -a,--all Convert all blanks" \
4019 "\n -f,--first-only Convert only leading blanks" \
4020 "\n -t,--tabs=N Tabstops every N chars" \
4022 IF_NOT_FEATURE_UNEXPAND_LONG_OPTIONS( \
4023 "\n -a Convert all blanks" \
4024 "\n -f Convert only leading blanks" \
4025 "\n -t N Tabstops every N chars" \
4028 #define uniq_trivial_usage \
4029 "[-cdu][-f,s,w N] [INPUT [OUTPUT]]"
4030 #define uniq_full_usage "\n\n" \
4031 "Discard duplicate lines\n" \
4033 "\n -c Prefix lines by the number of occurrences" \
4034 "\n -d Only print duplicate lines" \
4035 "\n -u Only print unique lines" \
4036 "\n -f N Skip first N fields" \
4037 "\n -s N Skip first N chars (after any skipped fields)" \
4038 "\n -w N Compare N characters in line" \
4040 #define uniq_example_usage \
4041 "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
4046 #define unzip_trivial_usage \
4047 "[-opts[modifiers]] FILE[.zip] [LIST] [-x XLIST] [-d DIR]"
4048 #define unzip_full_usage "\n\n" \
4049 "Extract files from ZIP archives\n" \
4051 "\n -l List archive contents (with -q for short form)" \
4052 "\n -n Never overwrite files (default)" \
4054 "\n -p Send output to stdout" \
4056 "\n -x XLST Exclude these files" \
4057 "\n -d DIR Extract files into DIR" \
4059 #define uptime_trivial_usage \
4061 #define uptime_full_usage "\n\n" \
4062 "Display the time since the last boot"
4064 #define uptime_example_usage \
4066 " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
4068 #define usleep_trivial_usage \
4070 #define usleep_full_usage "\n\n" \
4071 "Pause for N microseconds"
4073 #define usleep_example_usage \
4074 "$ usleep 1000000\n" \
4075 "[pauses for 1 second]\n"
4077 #define uudecode_trivial_usage \
4078 "[-o OUTFILE] [INFILE]"
4079 #define uudecode_full_usage "\n\n" \
4080 "Uudecode a file\n" \
4081 "Finds outfile name in uuencoded source unless -o is given"
4083 #define uudecode_example_usage \
4084 "$ uudecode -o busybox busybox.uu\n" \
4085 "$ ls -l busybox\n" \
4086 "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
4088 #define uuencode_trivial_usage \
4089 "[-m] [INFILE] STORED_FILENAME"
4090 #define uuencode_full_usage "\n\n" \
4091 "Uuencode a file to stdout\n" \
4093 "\n -m Use base64 encoding per RFC1521" \
4095 #define uuencode_example_usage \
4096 "$ uuencode busybox busybox\n" \
4097 "begin 755 busybox\n" \
4098 "<encoded file snipped>\n" \
4099 "$ uudecode busybox busybox > busybox.uu\n" \
4102 #define vconfig_trivial_usage \
4104 #define vconfig_full_usage "\n\n" \
4105 "Create and remove virtual ethernet devices\n" \
4107 "\n add [interface-name] [vlan_id]" \
4108 "\n rem [vlan-name]" \
4109 "\n set_flag [interface-name] [flag-num] [0 | 1]" \
4110 "\n set_egress_map [vlan-name] [skb_priority] [vlan_qos]" \
4111 "\n set_ingress_map [vlan-name] [skb_priority] [vlan_qos]" \
4112 "\n set_name_type [name-type]" \
4114 #define vi_trivial_usage \
4115 "[OPTIONS] [FILE]..."
4116 #define vi_full_usage "\n\n" \
4119 IF_FEATURE_VI_COLON( \
4120 "\n -c Initial command to run ($EXINIT also available)" \
4122 IF_FEATURE_VI_READONLY( \
4125 "\n -H Short help regarding available features" \
4127 #define vlock_trivial_usage \
4129 #define vlock_full_usage "\n\n" \
4130 "Lock a virtual terminal. A password is required to unlock.\n" \
4132 "\n -a Lock all VTs" \
4134 #define volname_trivial_usage \
4136 #define volname_full_usage "\n\n" \
4137 "Show CD volume name of the DEVICE (default /dev/cdrom)"
4139 #define wall_trivial_usage \
4141 #define wall_full_usage "\n\n" \
4142 "Write content of FILE or stdin to all logged-in users"
4143 #define wall_sample_usage \
4144 "echo foo | wall\n" \
4147 #define watch_trivial_usage \
4148 "[-n SEC] [-t] PROG ARGS"
4149 #define watch_full_usage "\n\n" \
4150 "Run PROG periodically\n" \
4152 "\n -n Loop period in seconds (default 2)" \
4153 "\n -t Don't print header" \
4155 #define watch_example_usage \
4157 "Mon Dec 17 10:31:40 GMT 2000\n" \
4158 "Mon Dec 17 10:31:42 GMT 2000\n" \
4159 "Mon Dec 17 10:31:44 GMT 2000"
4161 #define watchdog_trivial_usage \
4162 "[-t N[ms]] [-T N[ms]] [-F] DEV"
4163 #define watchdog_full_usage "\n\n" \
4164 "Periodically write to watchdog device DEV\n" \
4166 "\n -T N Reboot after N seconds if not reset (default 60)" \
4167 "\n -t N Reset every N seconds (default 30)" \
4168 "\n -F Run in foreground" \
4170 "\nUse 500ms to specify period in milliseconds" \
4172 #define wget_trivial_usage \
4173 IF_FEATURE_WGET_LONG_OPTIONS( \
4174 "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document FILE]\n" \
4175 " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
4176 " [--no-check-certificate] [-U|--user-agent AGENT]" \
4177 IF_FEATURE_WGET_TIMEOUT("[-T SEC] ") " URL" \
4179 IF_NOT_FEATURE_WGET_LONG_OPTIONS( \
4180 "[-csq] [-O FILE] [-Y on/off] [-P DIR] [-U AGENT]" \
4181 IF_FEATURE_WGET_TIMEOUT("[-T SEC] ") " URL" \
4183 #define wget_full_usage "\n\n" \
4184 "Retrieve files via HTTP or FTP\n" \
4186 "\n -s Spider mode - only check file existence" \
4187 "\n -c Continue retrieval of aborted transfer" \
4189 "\n -P DIR Save to DIR (default .)" \
4190 IF_FEATURE_WGET_TIMEOUT( \
4191 "\n -T SEC Network read timeout is SEC seconds" \
4193 "\n -O FILE Save to FILE ('-' for stdout)" \
4194 "\n -U STR Use STR for User-Agent header" \
4195 "\n -Y Use proxy ('on' or 'off')" \
4197 #define which_trivial_usage \
4199 #define which_full_usage "\n\n" \
4201 #define which_example_usage \
4205 #define who_trivial_usage \
4207 #define who_full_usage "\n\n" \
4208 "Show who is logged on\n" \
4212 #define whoami_trivial_usage \
4214 #define whoami_full_usage "\n\n" \
4215 "Print the user name associated with the current effective user id"
4217 #define zcat_trivial_usage \
4219 #define zcat_full_usage "\n\n" \
4220 "Decompress to stdout"
4222 #define zcip_trivial_usage \
4223 "[OPTIONS] IFACE SCRIPT"
4224 #define zcip_full_usage "\n\n" \
4225 "Manage a ZeroConf IPv4 link-local address\n" \
4227 "\n -f Run in foreground" \
4228 "\n -q Quit after obtaining address" \
4229 "\n -r 169.254.x.x Request this address first" \
4232 "\nWith no -q, runs continuously monitoring for ARP conflicts," \
4233 "\nexits only on I/O errors (link down etc)" \
projects / oweals / busybox.git / blob