1 /* vi: set sw=8 ts=8: */
3 * This file suffers from chronically incorrect tabification
4 * of messages. Before editing this file:
5 * 1. Switch you editor to 8-space tab mode.
6 * 2. Do not use \t in messages, use real tab character.
7 * 3. Start each source line with message as follows:
8 * |<7 spaces>"text with tabs"....
10 * |<5 spaces>"\ntext with tabs"....
16 #define NOUSAGE_STR "\b"
20 #define acpid_trivial_usage \
21 "[-d] [-c CONFDIR] [-l LOGFILE] [-e PROC_EVENT_FILE] [EVDEV_EVENT_FILE]..."
22 #define acpid_full_usage "\n\n" \
23 "Listen to ACPI events and spawn specific helpers on event arrival\n" \
25 "\n -d Don't daemonize, log to stderr" \
26 "\n -c DIR Config directory [/etc/acpi]" \
27 "\n -e FILE /proc event file [/proc/acpi/event]" \
28 "\n -l FILE Log file [/var/log/acpid]" \
29 IF_FEATURE_ACPID_COMPAT( \
30 "\n\nAccept and ignore compatibility options -g -m -s -S -v" \
33 #define acpid_example_usage \
34 "# acpid -l /var/log/my-acpi-log\n" \
35 "# acpid -d /dev/input/event*\n"
37 #define addgroup_trivial_usage \
38 "[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[USER] ") "GROUP"
39 #define addgroup_full_usage "\n\n" \
40 "Add a group " IF_FEATURE_ADDUSER_TO_GROUP("or add a user to a group") "\n" \
42 "\n -g GID Group id" \
43 "\n -S Create a system group" \
45 #define adduser_trivial_usage \
47 #define adduser_full_usage "\n\n" \
50 "\n -h DIR Home directory" \
51 "\n -g GECOS GECOS field" \
52 "\n -s SHELL Login shell" \
53 "\n -G GRP Add user to existing group" \
54 "\n -S Create a system user" \
55 "\n -D Don't assign a password" \
56 "\n -H Don't create home directory" \
59 #define adjtimex_trivial_usage \
60 "[-q] [-o OFF] [-f FREQ] [-p TCONST] [-t TICK]"
61 #define adjtimex_full_usage "\n\n" \
62 "Read and optionally set system timebase parameters. See adjtimex(2)\n" \
65 "\n -o OFF Time offset, microseconds" \
66 "\n -f FREQ Frequency adjust, integer kernel units (65536 is 1ppm)" \
67 "\n (positive values make clock run faster)" \
68 "\n -t TICK Microseconds per tick, usually 10000" \
71 #define ar_trivial_usage \
72 "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
73 #define ar_full_usage "\n\n" \
74 "Extract or list FILES from an ar archive\n" \
76 "\n -o Preserve original dates" \
77 "\n -p Extract to stdout" \
82 #define arp_trivial_usage \
83 "\n[-vn] [-H HWTYPE] [-i IF] -a [HOSTNAME]" \
84 "\n[-v] [-i IF] -d HOSTNAME [pub]" \
85 "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]" \
86 "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub" \
87 "\n[-v] [-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub"
88 #define arp_full_usage "\n\n" \
89 "Manipulate ARP cache\n" \
91 "\n -a Display (all) hosts" \
92 "\n -s Set new ARP entry" \
93 "\n -d Delete a specified entry" \
95 "\n -n Don't resolve names" \
96 "\n -i IF Network interface" \
97 "\n -D Read <hwaddr> from given device" \
98 "\n -A, -p AF Protocol family" \
99 "\n -H HWTYPE Hardware address type" \
101 #define arping_trivial_usage \
102 "[-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP"
103 #define arping_full_usage "\n\n" \
104 "Send ARP requests/replies\n" \
106 "\n -f Quit on first ARP reply" \
108 "\n -b Keep broadcasting, don't go unicast" \
109 "\n -D Duplicated address detection mode" \
110 "\n -U Unsolicited ARP mode, update your neighbors" \
111 "\n -A ARP answer mode, update your neighbors" \
112 "\n -c N Stop after sending N ARP requests" \
113 "\n -w TIMEOUT Time to wait for ARP reply, seconds" \
114 "\n -I IFACE Interface to use (default eth0)" \
115 "\n -s SRC_IP Sender IP address" \
116 "\n DST_IP Target IP address" \
118 #define sh_trivial_usage NOUSAGE_STR
119 #define sh_full_usage ""
120 #define ash_trivial_usage NOUSAGE_STR
121 #define ash_full_usage ""
122 #define hush_trivial_usage NOUSAGE_STR
123 #define hush_full_usage ""
124 #define lash_trivial_usage NOUSAGE_STR
125 #define lash_full_usage ""
126 #define msh_trivial_usage NOUSAGE_STR
127 #define msh_full_usage ""
128 #define bash_trivial_usage NOUSAGE_STR
129 #define bash_full_usage ""
131 #define awk_trivial_usage \
132 "[OPTIONS] [AWK_PROGRAM] [FILE]..."
133 #define awk_full_usage "\n\n" \
135 "\n -v VAR=VAL Set variable" \
136 "\n -F SEP Use SEP as field separator" \
137 "\n -f FILE Read program from FILE" \
139 #define basename_trivial_usage \
141 #define basename_full_usage "\n\n" \
142 "Strip directory path and .SUFFIX from FILE\n"
143 #define basename_example_usage \
144 "$ basename /usr/local/bin/foo\n" \
146 "$ basename /usr/local/bin/\n" \
148 "$ basename /foo/bar.txt .txt\n" \
151 #define beep_trivial_usage \
152 "-f FREQ -l LEN -d DELAY -r COUNT -n"
153 #define beep_full_usage "\n\n" \
155 "\n -f Frequency in Hz" \
156 "\n -l Length in ms" \
157 "\n -d Delay in ms" \
158 "\n -r Repetitions" \
159 "\n -n Start new tone" \
161 #define blkid_trivial_usage \
163 #define blkid_full_usage "\n\n" \
164 "Print UUIDs of all filesystems"
166 #define bootchartd_trivial_usage \
167 "start [PROG ARGS]|stop|init"
168 #define bootchartd_full_usage "\n\n" \
169 "Create /var/log/bootchart.tgz with boot chart data\n" \
171 "\nstart: start background logging; with PROG, run PROG, then kill logging with USR1" \
172 "\nstop: send USR1 to all bootchartd processes" \
173 "\ninit: start background logging; stop when getty/xdm is seen (for init scripts)" \
174 "\nUnder PID 1: as init, then exec $bootchart_init, /init, /sbin/init" \
176 #define brctl_trivial_usage \
177 "COMMAND [BRIDGE [INTERFACE]]"
178 #define brctl_full_usage "\n\n" \
179 "Manage ethernet bridges\n" \
181 IF_FEATURE_BRCTL_SHOW( \
182 "\n show Show a list of bridges" \
184 "\n addbr BRIDGE Create BRIDGE" \
185 "\n delbr BRIDGE Delete BRIDGE" \
186 "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \
187 "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \
188 IF_FEATURE_BRCTL_FANCY( \
189 "\n setageing BRIDGE TIME Set ageing time" \
190 "\n setfd BRIDGE TIME Set bridge forward delay" \
191 "\n sethello BRIDGE TIME Set hello time" \
192 "\n setmaxage BRIDGE TIME Set max message age" \
193 "\n setpathcost BRIDGE COST Set path cost" \
194 "\n setportprio BRIDGE PRIO Set port priority" \
195 "\n setbridgeprio BRIDGE PRIO Set bridge priority" \
196 "\n stp BRIDGE [1/yes/on|0/no/off] STP on/off" \
199 #define bzip2_trivial_usage \
200 "[OPTIONS] [FILE]..."
201 #define bzip2_full_usage "\n\n" \
202 "Compress FILEs (or stdin) with bzip2 algorithm\n" \
204 "\n -1..9 Compression level" \
206 "\n -c Write to stdout" \
209 #define busybox_notes_usage \
212 #define lzop_trivial_usage \
213 "[-cfvd123456789CF] [FILE]..."
214 #define lzop_full_usage "\n\n" \
216 "\n -1..9 Compression level" \
218 "\n -c Write to stdout" \
221 "\n -F Don't store or verify checksum" \
222 "\n -C Also write checksum of compressed block" \
224 #define lzopcat_trivial_usage \
226 #define lzopcat_full_usage "\n\n" \
228 "\n -F Don't store or verify checksum" \
230 #define unlzop_trivial_usage \
232 #define unlzop_full_usage "\n\n" \
234 "\n -c Write to stdout" \
237 "\n -F Don't store or verify checksum" \
239 #define unlzma_trivial_usage \
240 "[OPTIONS] [FILE]..."
241 #define unlzma_full_usage "\n\n" \
242 "Decompress FILE (or stdin)\n" \
244 "\n -c Write to stdout" \
247 #define lzma_trivial_usage \
248 "-d [OPTIONS] [FILE]..."
249 #define lzma_full_usage "\n\n" \
250 "Decompress FILE (or stdin)\n" \
253 "\n -c Write to stdout" \
256 #define lzcat_trivial_usage \
258 #define lzcat_full_usage "\n\n" \
259 "Decompress to stdout"
261 #define unxz_trivial_usage \
262 "[OPTIONS] [FILE]..."
263 #define unxz_full_usage "\n\n" \
264 "Decompress FILE (or stdin)\n" \
266 "\n -c Write to stdout" \
269 #define xz_trivial_usage \
270 "-d [OPTIONS] [FILE]..."
271 #define xz_full_usage "\n\n" \
272 "Decompress FILE (or stdin)\n" \
275 "\n -c Write to stdout" \
278 #define xzcat_trivial_usage \
280 #define xzcat_full_usage "\n\n" \
281 "Decompress to stdout"
283 #define cal_trivial_usage \
284 "[-jy] [[MONTH] YEAR]"
285 #define cal_full_usage "\n\n" \
286 "Display a calendar\n" \
288 "\n -j Use julian dates" \
289 "\n -y Display the entire year" \
291 #define cat_trivial_usage \
293 #define cat_full_usage "\n\n" \
294 "Concatenate FILEs and print them to stdout" \
296 #define cat_example_usage \
297 "$ cat /proc/uptime\n" \
300 #define catv_trivial_usage \
302 #define catv_full_usage "\n\n" \
303 "Display nonprinting characters as ^x or M-x\n" \
305 "\n -e End each line with $" \
306 "\n -t Show tabs as ^I" \
307 "\n -v Don't use ^x or M-x escapes" \
309 #define chat_trivial_usage \
310 "EXPECT [SEND [EXPECT [SEND...]]]"
311 #define chat_full_usage "\n\n" \
312 "Useful for interacting with a modem connected to stdin/stdout.\n" \
313 "A script consists of one or more \"expect-send\" pairs of strings,\n" \
314 "each pair is a pair of arguments. Example:\n" \
315 "chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \
317 #define chattr_trivial_usage \
318 "[-R] [-+=AacDdijsStTu] [-v VERSION] [FILE]..."
319 #define chattr_full_usage "\n\n" \
320 "Change file attributes on an ext2 fs\n" \
322 "\n - Remove attributes" \
323 "\n + Add attributes" \
324 "\n = Set attributes" \
326 "\n A Don't track atime" \
327 "\n a Append mode only" \
328 "\n c Enable compress" \
329 "\n D Write dir contents synchronously" \
330 "\n d Don't backup with dump" \
331 "\n i Cannot be modified (immutable)" \
332 "\n j Write all data to journal first" \
333 "\n s Zero disk storage when deleted" \
334 "\n S Write file contents synchronously" \
335 "\n t Disable tail-merging of partial blocks with other files" \
336 "\n u Allow file to be undeleted" \
339 "\n -v Set the file's version/generation number" \
341 #define chcon_trivial_usage \
342 "[OPTIONS] CONTEXT FILE..." \
343 "\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \
344 IF_FEATURE_CHCON_LONG_OPTIONS( \
345 "\n chcon [OPTIONS] --reference=RFILE FILE..." \
347 #define chcon_full_usage "\n\n" \
348 "Change the security context of each FILE to CONTEXT\n" \
349 IF_FEATURE_CHCON_LONG_OPTIONS( \
350 "\n -v,--verbose Verbose" \
351 "\n -c,--changes Report changes made" \
352 "\n -h,--no-dereference Affect symlinks instead of their targets" \
353 "\n -f,--silent,--quiet Suppress most error messages" \
354 "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
355 "\n -u,--user=USER Set user/role/type/range in the target" \
356 "\n -r,--role=ROLE security context" \
357 "\n -t,--type=TYPE" \
358 "\n -l,--range=RANGE" \
359 "\n -R,--recursive Recurse" \
361 IF_NOT_FEATURE_CHCON_LONG_OPTIONS( \
363 "\n -c Report changes made" \
364 "\n -h Affect symlinks instead of their targets" \
365 "\n -f Suppress most error messages" \
366 "\n -u USER Set user/role/type/range in the target security context" \
373 #define chmod_trivial_usage \
374 "[-R"IF_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
375 #define chmod_full_usage "\n\n" \
376 "Each MODE is one or more of the letters ugoa, one of the\n" \
377 "symbols +-= and one or more of the letters rwxst\n" \
381 "\n -c List changed files" \
382 "\n -v List all files" \
383 "\n -f Hide errors" \
385 #define chmod_example_usage \
386 "$ ls -l /tmp/foo\n" \
387 "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
388 "$ chmod u+x /tmp/foo\n" \
389 "$ ls -l /tmp/foo\n" \
390 "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
391 "$ chmod 444 /tmp/foo\n" \
392 "$ ls -l /tmp/foo\n" \
393 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
395 #define chgrp_trivial_usage \
396 "[-RhLHP"IF_DESKTOP("cvf")"]... GROUP FILE..."
397 #define chgrp_full_usage "\n\n" \
398 "Change the group membership of each FILE to GROUP\n" \
401 "\n -h Affect symlinks instead of symlink targets" \
402 "\n -L Traverse all symlinks to directories" \
403 "\n -H Traverse symlinks on command line only" \
404 "\n -P Don't traverse symlinks (default)" \
406 "\n -c List changed files" \
408 "\n -f Hide errors" \
410 #define chgrp_example_usage \
411 "$ ls -l /tmp/foo\n" \
412 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
413 "$ chgrp root /tmp/foo\n" \
414 "$ ls -l /tmp/foo\n" \
415 "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
417 #define chown_trivial_usage \
418 "[-RhLHP"IF_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
419 #define chown_full_usage "\n\n" \
420 "Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \
423 "\n -h Affect symlinks instead of symlink targets" \
424 "\n -L Traverse all symlinks to directories" \
425 "\n -H Traverse symlinks on command line only" \
426 "\n -P Don't traverse symlinks (default)" \
428 "\n -c List changed files" \
429 "\n -v List all files" \
430 "\n -f Hide errors" \
432 #define chown_example_usage \
433 "$ ls -l /tmp/foo\n" \
434 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
435 "$ chown root /tmp/foo\n" \
436 "$ ls -l /tmp/foo\n" \
437 "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
438 "$ chown root.root /tmp/foo\n" \
440 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
442 #define chpst_trivial_usage \
443 "[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \
444 " [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \
445 " [-p N] [-f BYTES] [-c BYTES] PROG ARGS"
446 #define chpst_full_usage "\n\n" \
447 "Change the process state and run PROG\n" \
449 "\n -u USER[:GRP] Set uid and gid" \
450 "\n -U USER[:GRP] Set $UID and $GID in environment" \
451 "\n -e DIR Set environment variables as specified by files" \
452 "\n in DIR: file=1st_line_of_file" \
453 "\n -/ DIR Chroot to DIR" \
454 "\n -n NICE Add NICE to nice value" \
455 "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \
456 "\n -d BYTES Limit data segment" \
457 "\n -o N Limit number of open files per process" \
458 "\n -p N Limit number of processes per uid" \
459 "\n -f BYTES Limit output file sizes" \
460 "\n -c BYTES Limit core file size" \
462 "\n -P Create new process group" \
463 "\n -0 Close stdin" \
464 "\n -1 Close stdout" \
465 "\n -2 Close stderr" \
467 #define setuidgid_trivial_usage \
469 #define setuidgid_full_usage "\n\n" \
470 "Set uid and gid to USER's uid and gid, removing all supplementary\n" \
471 "groups and run PROG"
472 #define envuidgid_trivial_usage \
474 #define envuidgid_full_usage "\n\n" \
475 "Set $UID to USER's uid and $GID to USER's gid and run PROG"
476 #define envdir_trivial_usage \
478 #define envdir_full_usage "\n\n" \
479 "Set various environment variables as specified by files\n" \
480 "in the directory dir and run PROG"
481 #define softlimit_trivial_usage \
482 "[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \
483 " [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \
485 #define softlimit_full_usage "\n\n" \
486 "Set soft resource limits, then run PROG\n" \
488 "\n -a BYTES Limit total size of all segments" \
489 "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \
490 "\n -d BYTES Limit data segment" \
491 "\n -s BYTES Limit stack segment" \
492 "\n -l BYTES Limit locked memory size" \
493 "\n -o N Limit number of open files per process" \
494 "\n -p N Limit number of processes per uid" \
495 "\nOptions controlling file sizes:" \
496 "\n -f BYTES Limit output file sizes" \
497 "\n -c BYTES Limit core file size" \
498 "\nEfficiency opts:" \
499 "\n -r BYTES Limit resident set size" \
500 "\n -t N Limit CPU time, process receives" \
501 "\n a SIGXCPU after N seconds" \
503 #define chroot_trivial_usage \
504 "NEWROOT [PROG ARGS]"
505 #define chroot_full_usage "\n\n" \
506 "Run PROG with root directory set to NEWROOT"
507 #define chroot_example_usage \
508 "$ ls -l /bin/ls\n" \
509 "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
510 "# mount /dev/hdc1 /mnt -t minix\n" \
512 "# ls -l /bin/ls\n" \
513 "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
515 #define chvt_trivial_usage \
517 #define chvt_full_usage "\n\n" \
518 "Change the foreground virtual terminal to /dev/ttyN"
520 #define cksum_trivial_usage \
522 #define cksum_full_usage "\n\n" \
523 "Calculate the CRC32 checksums of FILES"
525 #define clear_trivial_usage \
527 #define clear_full_usage "\n\n" \
530 #define cmp_trivial_usage \
531 "[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]]") "]"
532 #define cmp_full_usage "\n\n" \
533 "Compare FILE1 with FILE2 (or stdin)\n" \
535 "\n -l Write the byte numbers (decimal) and values (octal)" \
536 "\n for all differing bytes" \
539 #define comm_trivial_usage \
541 #define comm_full_usage "\n\n" \
542 "Compare FILE1 with FILE2\n" \
544 "\n -1 Suppress lines unique to FILE1" \
545 "\n -2 Suppress lines unique to FILE2" \
546 "\n -3 Suppress lines common to both files" \
548 #define bbconfig_trivial_usage \
550 #define bbconfig_full_usage "\n\n" \
551 "Print the config file which built busybox"
553 #define chrt_trivial_usage \
554 "[OPTIONS] [PRIO] [PID | PROG ARGS]"
555 #define chrt_full_usage "\n\n" \
556 "Manipulate real-time attributes of a process\n" \
558 "\n -p Operate on PID" \
559 "\n -r Set SCHED_RR scheduling" \
560 "\n -f Set SCHED_FIFO scheduling" \
561 "\n -o Set SCHED_OTHER scheduling" \
562 "\n -m Show min and max priorities" \
564 #define chrt_example_usage \
565 "$ chrt -r 4 sleep 900; x=$!\n" \
566 "$ chrt -f -p 3 $x\n" \
567 "You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
569 #define cp_trivial_usage \
570 "[OPTIONS] SOURCE DEST"
571 #define cp_full_usage "\n\n" \
572 "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \
574 "\n -a Same as -dpR" \
576 "\n -c Preserve security context" \
579 "\n -d,-P Preserve symlinks (default if -R)" \
580 "\n -L Follow all symlinks" \
581 "\n -H Follow symlinks on command line" \
582 "\n -p Preserve file attributes if possible" \
584 "\n -i Prompt before overwrite" \
585 "\n -l,-s Create (sym)links" \
587 #define cpio_trivial_usage \
588 "[-dmvu] [-F FILE]" IF_FEATURE_CPIO_O(" [-H newc]") \
589 " [-ti"IF_FEATURE_CPIO_O("o")"]" IF_FEATURE_CPIO_P(" [-p DIR]")
590 #define cpio_full_usage "\n\n" \
591 "Extract or list files from a cpio archive" \
592 IF_FEATURE_CPIO_O(", or" \
593 "\ncreate an archive" IF_FEATURE_CPIO_P(" (-o) or copy files (-p)") \
594 " using file list on stdin" \
597 "\nMain operation mode:" \
601 "\n -o Create (requires -H newc)" \
604 "\n -p DIR Copy files to DIR" \
607 "\n -d Make leading directories" \
608 "\n -m Preserve mtime" \
611 "\n -F FILE Input (-t,-i,-p) or output (-o) file" \
613 "\n -H newc Archive format" \
616 #define crond_trivial_usage \
617 "-fbS -l N " IF_FEATURE_CROND_D("-d N ") "-L LOGFILE -c DIR"
618 #define crond_full_usage "\n\n" \
620 "\n -b Background (default)" \
621 "\n -S Log to syslog (default)" \
622 "\n -l Set log level. 0 is the most verbose, default 8" \
623 IF_FEATURE_CROND_D( \
624 "\n -d Set log level, log to stderr" \
626 "\n -L Log to file" \
627 "\n -c Working dir" \
629 #define crontab_trivial_usage \
630 "[-c DIR] [-u USER] [-ler]|[FILE]"
631 #define crontab_full_usage "\n\n" \
632 " -c Crontab directory" \
634 "\n -l List crontab" \
635 "\n -e Edit crontab" \
636 "\n -r Delete crontab" \
637 "\n FILE Replace crontab by FILE ('-': stdin)" \
639 #define cryptpw_trivial_usage \
640 "[OPTIONS] [PASSWORD] [SALT]"
641 /* We do support -s, we just don't mention it */
642 #define cryptpw_full_usage "\n\n" \
643 "Crypt the PASSWORD using crypt(3)\n" \
646 "\n -P,--password-fd=N Read password from fd N" \
647 /* "\n -s,--stdin Use stdin; like -P0" */ \
648 "\n -m,--method=TYPE Encryption method TYPE" \
649 "\n -S,--salt=SALT" \
652 "\n -P N Read password from fd N" \
653 /* "\n -s Use stdin; like -P0" */ \
654 "\n -m TYPE Encryption method TYPE" \
658 /* mkpasswd is an alias to cryptpw */
660 #define mkpasswd_trivial_usage \
661 "[OPTIONS] [PASSWORD] [SALT]"
662 /* We do support -s, we just don't mention it */
663 #define mkpasswd_full_usage "\n\n" \
664 "Crypt the PASSWORD using crypt(3)\n" \
667 "\n -P,--password-fd=N Read password from fd N" \
668 /* "\n -s,--stdin Use stdin; like -P0" */ \
669 "\n -m,--method=TYPE Encryption method TYPE" \
670 "\n -S,--salt=SALT" \
673 "\n -P N Read password from fd N" \
674 /* "\n -s Use stdin; like -P0" */ \
675 "\n -m TYPE Encryption method TYPE" \
679 #define cttyhack_trivial_usage \
681 #define cttyhack_full_usage "\n\n" \
682 "Give PROG a controlling tty if possible." \
683 "\nExample for /etc/inittab (for busybox init):" \
684 "\n ::respawn:/bin/cttyhack /bin/sh" \
685 "\nGiving controlling tty to shell running with PID 1:" \
686 "\n $ exec cttyhack sh" \
687 "\nStarting interactive shell from boot shell script:" \
688 "\n setsid cttyhack sh" \
690 #define cut_trivial_usage \
691 "[OPTIONS] [FILE]..."
692 #define cut_full_usage "\n\n" \
693 "Print selected fields from each input FILE to stdout\n" \
695 "\n -b LIST Output only bytes from LIST" \
696 "\n -c LIST Output only characters from LIST" \
697 "\n -d CHAR Use CHAR instead of tab as the field delimiter" \
698 "\n -s Output only the lines containing delimiter" \
699 "\n -f N Print only these fields" \
702 #define cut_example_usage \
703 "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
705 "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
708 #define date_trivial_usage \
709 "[OPTIONS] [+FMT] [TIME]"
710 #define date_full_usage "\n\n" \
711 "Display time (using +FMT), or set time\n" \
714 "\n [-s] TIME Set time to TIME" \
715 "\n -u Work in UTC (don't convert to local time)" \
716 "\n -R Output RFC-2822 compliant date string" \
718 "\n [-s,--set] TIME Set time to TIME" \
719 "\n -u,--utc Work in UTC (don't convert to local time)" \
720 "\n -R,--rfc-2822 Output RFC-2822 compliant date string" \
722 IF_FEATURE_DATE_ISOFMT( \
723 "\n -I[SPEC] Output ISO-8601 compliant date string" \
724 "\n SPEC='date' (default) for date only," \
725 "\n 'hours', 'minutes', or 'seconds' for date and" \
726 "\n time to the indicated precision" \
727 ) IF_NOT_LONG_OPTS( \
728 "\n -r FILE Display last modification time of FILE" \
729 "\n -d TIME Display TIME, not 'now'" \
731 "\n -r,--reference FILE Display last modification time of FILE" \
732 "\n -d,--date TIME Display TIME, not 'now'" \
734 IF_FEATURE_DATE_ISOFMT( \
735 "\n -D FMT Use FMT for -d TIME conversion" \
738 "\nRecognized TIME formats:" \
740 "\n [YYYY.]MM.DD-hh:mm[:ss]" \
741 "\n YYYY-MM-DD hh:mm[:ss]" \
742 "\n [[[[[YY]YY]MM]DD]hh]mm[.ss]" \
744 #define date_example_usage \
746 "Wed Apr 12 18:52:41 MDT 2000\n"
748 #define dc_trivial_usage \
750 #define dc_full_usage "\n\n" \
751 "Tiny RPN calculator. Operations:\n" \
752 "+, add, -, sub, *, mul, /, div, %, mod, **, exp, and, or, not, eor,\n" \
753 "p - print top of the stack (without altering the stack),\n" \
754 "f - print entire stack, o - pop the value and set output radix\n" \
755 "(value must be 10 or 16).\n" \
756 "Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16\n" \
758 #define dc_example_usage \
761 "$ dc 8 8 \\* 2 2 + / p\n" \
767 "$ echo 72 9 div 8 mul p | dc\n" \
770 #define dd_trivial_usage \
771 "[if=FILE] [of=FILE] " IF_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
772 " [seek=N]" IF_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync|fsync]")
773 #define dd_full_usage "\n\n" \
774 "Copy a file with converting and formatting\n" \
776 "\n if=FILE Read from FILE instead of stdin" \
777 "\n of=FILE Write to FILE instead of stdout" \
778 "\n bs=N Read and write N bytes at a time" \
779 IF_FEATURE_DD_IBS_OBS( \
780 "\n ibs=N Read N bytes at a time" \
782 IF_FEATURE_DD_IBS_OBS( \
783 "\n obs=N Write N bytes at a time" \
785 "\n count=N Copy only N input blocks" \
786 "\n skip=N Skip N input blocks" \
787 "\n seek=N Skip N output blocks" \
788 IF_FEATURE_DD_IBS_OBS( \
789 "\n conv=notrunc Don't truncate output file" \
790 "\n conv=noerror Continue after read errors" \
791 "\n conv=sync Pad blocks with zeros" \
792 "\n conv=fsync Physically write data out before finishing" \
795 "\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \
796 "\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \
798 #define dd_example_usage \
799 "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
803 #define deallocvt_trivial_usage \
805 #define deallocvt_full_usage "\n\n" \
806 "Deallocate unused virtual terminal /dev/ttyN"
808 #define delgroup_trivial_usage \
809 IF_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
810 #define delgroup_full_usage "\n\n" \
811 "Delete group GROUP from the system" \
812 IF_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
814 #define deluser_trivial_usage \
816 #define deluser_full_usage "\n\n" \
817 "Delete USER from the system"
819 #define depmod_trivial_usage NOUSAGE_STR
820 #define depmod_full_usage ""
822 #define devmem_trivial_usage \
823 "ADDRESS [WIDTH [VALUE]]"
825 #define devmem_full_usage "\n\n" \
826 "Read/write from physical address\n" \
827 "\n ADDRESS Address to act upon" \
828 "\n WIDTH Width (8/16/...)" \
829 "\n VALUE Data to be written" \
831 #define devfsd_trivial_usage \
832 "mntpnt [-v]" IF_DEVFSD_FG_NP("[-fg][-np]")
833 #define devfsd_full_usage "\n\n" \
834 "Manage devfs permissions and old device name symlinks\n" \
836 "\n mntpnt The mount point where devfs is mounted" \
837 "\n -v Print the protocol version numbers for devfsd" \
838 "\n and the kernel-side protocol version and exit" \
840 "\n -fg Run in foreground" \
841 "\n -np Exit after parsing the configuration file" \
842 "\n and processing synthetic REGISTER events," \
843 "\n don't poll for events" \
846 #define df_trivial_usage \
848 IF_FEATURE_HUMAN_READABLE("mh") \
849 IF_FEATURE_DF_FANCY("ai] [-B SIZE") \
851 #define df_full_usage "\n\n" \
852 "Print filesystem usage statistics\n" \
854 "\n -P POSIX output format" \
855 "\n -k 1024-byte blocks (default)" \
856 IF_FEATURE_HUMAN_READABLE( \
857 "\n -m 1M-byte blocks" \
858 "\n -h Human readable (e.g. 1K 243M 2G)" \
860 IF_FEATURE_DF_FANCY( \
861 "\n -a Show all filesystems" \
863 "\n -B SIZE Blocksize" \
866 #define df_example_usage \
868 "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
869 "/dev/sda3 8690864 8553540 137324 98% /\n" \
870 "/dev/sda1 64216 36364 27852 57% /boot\n" \
872 "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
873 "/dev/sda3 8690864 8553540 137324 98% /\n" \
874 "$ POSIXLY_CORRECT=sure df /dev/sda3\n" \
875 "Filesystem 512B-blocks Used Available Use% Mounted on\n" \
876 "/dev/sda3 17381728 17107080 274648 98% /\n" \
877 "$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" \
878 "Filesystem 512-blocks Used Available Capacity Mounted on\n" \
879 "/dev/sda3 17381728 17107080 274648 98% /\n"
881 #define dhcprelay_trivial_usage \
882 "CLIENT_IFACE[,CLIENT_IFACE2]... SERVER_IFACE [SERVER_IP]"
883 #define dhcprelay_full_usage "\n\n" \
884 "Relay DHCP requests between clients and server" \
886 #define diff_trivial_usage \
887 "[-abBdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
888 #define diff_full_usage "\n\n" \
889 "Compare files line by line and output the differences between them.\n" \
890 "This implementation supports unified diffs only.\n" \
892 "\n -a Treat all files as text" \
893 "\n -b Ignore changes in the amount of whitespace" \
894 "\n -B Ignore changes whose lines are all blank" \
895 "\n -d Try hard to find a smaller set of changes" \
896 "\n -i Ignore case differences" \
897 "\n -L Use LABEL instead of the filename in the unified header" \
898 "\n -N Treat absent files as empty" \
899 "\n -q Output only whether files differ" \
901 "\n -S Start with FILE when comparing directories" \
902 "\n -T Make tabs line up by prefixing a tab when necessary" \
903 "\n -s Report when two files are the same" \
904 "\n -t Expand tabs to spaces in output" \
905 "\n -U Output LINES lines of context" \
906 "\n -w Ignore all whitespace" \
908 #define dirname_trivial_usage \
910 #define dirname_full_usage "\n\n" \
911 "Strip non-directory suffix from FILENAME"
912 #define dirname_example_usage \
913 "$ dirname /tmp/foo\n" \
915 "$ dirname /tmp/foo/\n" \
918 #define dmesg_trivial_usage \
919 "[-c] [-n LEVEL] [-s SIZE]"
920 #define dmesg_full_usage "\n\n" \
921 "Print or control the kernel ring buffer\n" \
923 "\n -c Clear ring buffer after printing" \
924 "\n -n LEVEL Set console logging level" \
925 "\n -s SIZE Buffer size" \
927 #define dnsd_trivial_usage \
928 "[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]"
929 #define dnsd_full_usage "\n\n" \
930 "Small static DNS server daemon\n" \
932 "\n -c FILE Config file" \
934 "\n -p PORT Listen on PORT" \
935 "\n -i ADDR Listen on ADDR" \
938 "\n -s Send successful replies only. Use this if you want" \
939 "\n to use /etc/resolv.conf with two nameserver lines:" \
940 "\n nameserver DNSD_SERVER" \
941 "\n nameserver NORNAL_DNS_SERVER" \
943 #define dos2unix_trivial_usage \
945 #define dos2unix_full_usage "\n\n" \
946 "Convert FILE in-place from DOS to Unix format.\n" \
947 "When no file is given, use stdin/stdout.\n" \
952 #define unix2dos_trivial_usage \
954 #define unix2dos_full_usage "\n\n" \
955 "Convert FILE in-place from Unix to DOS format.\n" \
956 "When no file is given, use stdin/stdout.\n" \
961 #define dpkg_trivial_usage \
962 "[-ilCPru] [-F OPT] PACKAGE"
963 #define dpkg_full_usage "\n\n" \
964 "Install, remove and manage Debian packages\n" \
967 "\n -i,--install Install the package" \
968 "\n -l,--list List of installed packages" \
969 "\n --configure Configure an unpackaged package" \
970 "\n -P,--purge Purge all files of a package" \
971 "\n -r,--remove Remove all but the configuration files for a package" \
972 "\n --unpack Unpack a package, but don't configure it" \
973 "\n --force-depends Ignore dependency problems" \
974 "\n --force-confnew Overwrite existing config files when installing" \
975 "\n --force-confold Keep old config files when installing" \
978 "\n -i Install the package" \
979 "\n -l List of installed packages" \
980 "\n -C Configure an unpackaged package" \
981 "\n -P Purge all files of a package" \
982 "\n -r Remove all but the configuration files for a package" \
983 "\n -u Unpack a package, but don't configure it" \
984 "\n -F depends Ignore dependency problems" \
985 "\n -F confnew Overwrite existing config files when installing" \
986 "\n -F confold Keep old config files when installing" \
989 #define dpkg_deb_trivial_usage \
990 "[-cefxX] FILE [argument]"
991 #define dpkg_deb_full_usage "\n\n" \
992 "Perform actions on Debian packages (.debs)\n" \
994 "\n -c List contents of filesystem tree" \
995 "\n -e Extract control files to [argument] directory" \
996 "\n -f Display control field name starting with [argument]" \
997 "\n -x Extract packages filesystem tree to directory" \
998 "\n -X Verbose extract" \
1000 #define dpkg_deb_example_usage \
1001 "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
1003 #define du_trivial_usage \
1004 "[-aHLdclsx" IF_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
1005 #define du_full_usage "\n\n" \
1006 "Summarize disk space used for each FILE and/or directory.\n" \
1007 "Disk space is printed in units of " \
1008 IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
1009 IF_NOT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
1012 "\n -a Show file sizes too" \
1013 "\n -L Follow all symlinks" \
1014 "\n -H Follow symlinks on command line" \
1015 "\n -d N Limit output to directories (and files with -a) of depth < N" \
1016 "\n -c Show grand total" \
1017 "\n -l Count sizes many times if hard linked" \
1018 "\n -s Display only a total for each argument" \
1019 "\n -x Skip directories on different filesystems" \
1020 IF_FEATURE_HUMAN_READABLE( \
1021 "\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \
1022 "\n -m Sizes in megabytes" \
1024 "\n -k Sizes in kilobytes" \
1025 IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \
1027 #define du_example_usage \
1030 "12 ./kernel-patches/CVS\n" \
1031 "80 ./kernel-patches\n" \
1032 "12 ./tests/CVS\n" \
1034 "12 ./scripts/CVS\n" \
1040 #define dumpkmap_trivial_usage \
1042 #define dumpkmap_full_usage "\n\n" \
1043 "Print a binary keyboard translation table to stdout"
1044 #define dumpkmap_example_usage \
1045 "$ dumpkmap > keymap\n"
1047 #define dumpleases_trivial_usage \
1048 "[-r|-a] [-f LEASEFILE]"
1049 #define dumpleases_full_usage "\n\n" \
1050 "Display DHCP leases granted by udhcpd\n" \
1053 "\n -f,--file=FILE Lease file" \
1054 "\n -r,--remaining Show remaining time" \
1055 "\n -a,--absolute Show expiration time" \
1058 "\n -f FILE Lease file" \
1059 "\n -r Show remaining time" \
1060 "\n -a Show expiration time" \
1064 #define e2fsck_trivial_usage \
1065 "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
1066 "[-I inode_buffer_blocks] [-P process_inode_size] " \
1067 "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
1068 "[-E extended-options] device"
1069 #define e2fsck_full_usage "\n\n" \
1070 "Check ext2/ext3 file system\n" \
1072 "\n -p Automatic repair (no questions)" \
1073 "\n -n Make no changes to the filesystem" \
1074 "\n -y Assume 'yes' to all questions" \
1075 "\n -c Check for bad blocks and add them to the badblock list" \
1076 "\n -f Force checking even if filesystem is marked clean" \
1078 "\n -b superblock Use alternative superblock" \
1079 "\n -B blocksize Force blocksize when looking for superblock" \
1080 "\n -j journal Set location of the external journal" \
1081 "\n -l file Add to badblocks list" \
1082 "\n -L file Set badblocks list" \
1085 #define echo_trivial_usage \
1086 IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG]..."
1087 #define echo_full_usage "\n\n" \
1088 "Print the specified ARGs to stdout" \
1089 IF_FEATURE_FANCY_ECHO( "\n" \
1091 "\n -n Suppress trailing newline" \
1092 "\n -e Interpret backslash escapes (i.e., \\t=tab)" \
1093 "\n -E Don't interpret backslash escapes (default)" \
1095 #define echo_example_usage \
1096 "$ echo \"Erik is cool\"\n" \
1098 IF_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
1102 "$ echo \"Erik\\nis\\ncool\"\n" \
1103 "Erik\\nis\\ncool\n")
1105 #define eject_trivial_usage \
1106 "[-t] [-T] [DEVICE]"
1107 #define eject_full_usage "\n\n" \
1108 "Eject DEVICE or default /dev/cdrom\n" \
1110 IF_FEATURE_EJECT_SCSI( \
1111 "\n -s SCSI device" \
1113 "\n -t Close tray" \
1114 "\n -T Open/close tray (toggle)" \
1116 #define ed_trivial_usage ""
1117 #define ed_full_usage ""
1119 #define env_trivial_usage \
1120 "[-iu] [-] [name=value]... [PROG ARGS]"
1121 #define env_full_usage "\n\n" \
1122 "Print the current environment or run PROG after setting up\n" \
1123 "the specified environment\n" \
1125 "\n -, -i Start with an empty environment" \
1126 "\n -u Remove variable from the environment" \
1128 #define ether_wake_trivial_usage \
1129 "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
1130 #define ether_wake_full_usage "\n\n" \
1131 "Send a magic packet to wake up sleeping machines.\n" \
1132 "MAC must be a station address (00:11:22:33:44:55) or\n" \
1133 "a hostname with a known 'ethers' entry.\n" \
1135 "\n -b Send wake-up packet to the broadcast address" \
1136 "\n -i iface Interface to use (default eth0)" \
1137 "\n -p pass Append four or six byte password PW to the packet" \
1139 #define expand_trivial_usage \
1140 "[-i] [-t N] [FILE]..."
1141 #define expand_full_usage "\n\n" \
1142 "Convert tabs to spaces, writing to stdout\n" \
1144 IF_FEATURE_EXPAND_LONG_OPTIONS( \
1145 "\n -i,--initial Don't convert tabs after non blanks" \
1146 "\n -t,--tabs=N Tabstops every N chars" \
1148 IF_NOT_FEATURE_EXPAND_LONG_OPTIONS( \
1149 "\n -i Don't convert tabs after non blanks" \
1150 "\n -t Tabstops every N chars" \
1153 #define expr_trivial_usage \
1155 #define expr_full_usage "\n\n" \
1156 "Print the value of EXPRESSION to stdout\n" \
1158 "EXPRESSION may be:\n" \
1159 " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
1160 " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
1161 " ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \
1167 " ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \
1172 " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
1173 " match STRING REGEXP Same as STRING : REGEXP\n" \
1174 " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
1175 " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
1176 " length STRING Length of STRING\n" \
1177 " quote TOKEN Interpret TOKEN as a string, even if\n" \
1178 " it is a keyword like 'match' or an\n" \
1179 " operator like '/'\n" \
1180 " (EXPRESSION) Value of EXPRESSION\n" \
1182 "Beware that many operators need to be escaped or quoted for shells.\n" \
1183 "Comparisons are arithmetic if both ARGs are numbers, else\n" \
1184 "lexicographical. Pattern matches return the string matched between\n" \
1185 "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
1186 "of characters matched or 0."
1188 #define fakeidentd_trivial_usage \
1189 "[-fiw] [-b ADDR] [STRING]"
1190 #define fakeidentd_full_usage "\n\n" \
1191 "Provide fake ident (auth) service\n" \
1193 "\n -f Run in foreground" \
1194 "\n -i Inetd mode" \
1195 "\n -w Inetd 'wait' mode" \
1196 "\n -b ADDR Bind to specified address" \
1197 "\n STRING Ident answer string (default: nobody)" \
1199 #define false_trivial_usage \
1201 #define false_full_usage "\n\n" \
1202 "Return an exit code of FALSE (1)"
1204 #define false_example_usage \
1209 #define fbsplash_trivial_usage \
1210 "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
1211 #define fbsplash_full_usage "\n\n" \
1214 "\n -c Hide cursor" \
1215 "\n -d Framebuffer device (default /dev/fb0)" \
1216 "\n -i Config file (var=value):" \
1217 "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
1218 "\n BAR_R,BAR_G,BAR_B" \
1219 "\n -f Control pipe (else exit after drawing image)" \
1220 "\n commands: 'NN' (% for progress bar) or 'exit'" \
1222 #define fbset_trivial_usage \
1224 #define fbset_full_usage "\n\n" \
1225 "Show and modify frame buffer settings"
1227 #define fbset_example_usage \
1229 "mode \"1024x768-76\"\n" \
1230 " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
1231 " geometry 1024 768 1024 768 16\n" \
1232 " timings 12714 128 32 16 4 128 4\n" \
1234 " rgba 5/11,6/5,5/0,0/0\n" \
1237 #define fdflush_trivial_usage \
1239 #define fdflush_full_usage "\n\n" \
1240 "Force floppy disk drive to detect disk change"
1242 #define fdformat_trivial_usage \
1244 #define fdformat_full_usage "\n\n" \
1245 "Format floppy disk\n" \
1247 "\n -n Don't verify after format" \
1249 /* Looks like someone forgot to add this to config system */
1250 #ifndef ENABLE_FEATURE_FDISK_BLKSIZE
1251 # define ENABLE_FEATURE_FDISK_BLKSIZE 0
1252 # define IF_FEATURE_FDISK_BLKSIZE(a)
1255 #define fdisk_trivial_usage \
1256 "[-ul" IF_FEATURE_FDISK_BLKSIZE("s") "] " \
1257 "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
1258 #define fdisk_full_usage "\n\n" \
1259 "Change partition table\n" \
1261 "\n -u Start and End are in sectors (instead of cylinders)" \
1262 "\n -l Show partition table for each DISK, then exit" \
1263 IF_FEATURE_FDISK_BLKSIZE( \
1264 "\n -s Show partition sizes in kb for each DISK, then exit" \
1266 "\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
1267 "\n -C CYLINDERS Set number of cylinders/heads/sectors" \
1271 #define fgconsole_trivial_usage \
1273 #define fgconsole_full_usage "\n\n" \
1274 "Get active console"
1276 #define findfs_trivial_usage \
1277 "LABEL=label or UUID=uuid"
1278 #define findfs_full_usage "\n\n" \
1279 "Find a filesystem device based on a label or UUID"
1280 #define findfs_example_usage \
1281 "$ findfs LABEL=MyDevice"
1283 #define find_trivial_usage \
1284 "[PATH]... [EXPRESSION]"
1285 #define find_full_usage "\n\n" \
1286 "Search for files. The default PATH is the current directory,\n" \
1287 "default EXPRESSION is '-print'\n" \
1288 "\nEXPRESSION may consist of:" \
1289 "\n -follow Follow symlinks" \
1290 IF_FEATURE_FIND_XDEV( \
1291 "\n -xdev Don't descend directories on other filesystems") \
1292 IF_FEATURE_FIND_MAXDEPTH( \
1293 "\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \
1294 "\n tests/actions to command line arguments only") \
1295 "\n -mindepth N Don't act on first N levels" \
1296 "\n -name PATTERN File name (w/o directory name) matches PATTERN" \
1297 "\n -iname PATTERN Case insensitive -name" \
1298 IF_FEATURE_FIND_PATH( \
1299 "\n -path PATTERN Path matches PATTERN") \
1300 IF_FEATURE_FIND_REGEX( \
1301 "\n -regex PATTERN Path matches regex PATTERN") \
1302 IF_FEATURE_FIND_TYPE( \
1303 "\n -type X File type is X (X is one of: f,d,l,b,c,...)") \
1304 IF_FEATURE_FIND_PERM( \
1305 "\n -perm NNN Permissions match any of (+NNN), all of (-NNN)," \
1306 "\n or exactly NNN") \
1307 IF_FEATURE_FIND_MTIME( \
1308 "\n -mtime DAYS Modified time is greater than (+N), less than (-N)," \
1309 "\n or exactly N days") \
1310 IF_FEATURE_FIND_MMIN( \
1311 "\n -mmin MINS Modified time is greater than (+N), less than (-N)," \
1312 "\n or exactly N minutes") \
1313 IF_FEATURE_FIND_NEWER( \
1314 "\n -newer FILE Modified time is more recent than FILE's") \
1315 IF_FEATURE_FIND_INUM( \
1316 "\n -inum N File has inode number N") \
1317 IF_FEATURE_FIND_USER( \
1318 "\n -user NAME File is owned by user NAME (numeric user ID allowed)") \
1319 IF_FEATURE_FIND_GROUP( \
1320 "\n -group NAME File belongs to group NAME (numeric group ID allowed)") \
1321 IF_FEATURE_FIND_DEPTH( \
1322 "\n -depth Process directory name after traversing it") \
1323 IF_FEATURE_FIND_SIZE( \
1324 "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))" \
1325 "\n +/-N: file size is bigger/smaller than N") \
1326 IF_FEATURE_FIND_LINKS( \
1327 "\n -links N Number of links is greater than (+N), less than (-N)," \
1328 "\n or exactly N") \
1329 "\n -print Print (default and assumed)" \
1330 IF_FEATURE_FIND_PRINT0( \
1331 "\n -print0 Delimit output with null characters rather than" \
1333 IF_FEATURE_FIND_CONTEXT ( \
1334 "\n -context File has specified security context") \
1335 IF_FEATURE_FIND_EXEC( \
1336 "\n -exec CMD ARG ; Run CMD with all instances of {} replaced by the" \
1337 "\n matching files") \
1338 IF_FEATURE_FIND_PRUNE( \
1339 "\n -prune Stop traversing current subtree") \
1340 IF_FEATURE_FIND_DELETE( \
1341 "\n -delete Delete files, turns on -depth option") \
1342 IF_FEATURE_FIND_PAREN( \
1343 "\n (EXPR) Group an expression") \
1345 #define find_example_usage \
1346 "$ find / -name passwd\n" \
1349 #define flash_lock_trivial_usage \
1350 "MTD_DEVICE OFFSET SECTORS"
1351 #define flash_lock_full_usage "\n\n" \
1352 "Lock part or all of an MTD device. If SECTORS is -1, then all sectors\n" \
1353 "will be locked, regardless of the value of OFFSET"
1355 #define flash_unlock_trivial_usage \
1357 #define flash_unlock_full_usage "\n\n" \
1358 "Unlock an MTD device"
1360 #define flash_eraseall_trivial_usage \
1362 #define flash_eraseall_full_usage "\n\n" \
1363 "Erase an MTD device\n" \
1365 "\n -j Format the device for jffs2" \
1366 "\n -q Don't display progress messages" \
1368 #define flashcp_trivial_usage \
1369 "-v FILE MTD_DEVICE"
1370 #define flashcp_full_usage "\n\n" \
1371 "Copy an image to MTD device\n" \
1375 #define flock_trivial_usage \
1376 "[-sxun] FD|{FILE [-c] PROG ARGS}"
1377 #define flock_full_usage "\n\n" \
1378 "[Un]lock file descriptor, or lock FILE and run PROG\n" \
1380 "\n -s Shared lock" \
1381 "\n -x Exclusive lock (default)" \
1383 "\n -n Fail rather than wait" \
1385 #define fold_trivial_usage \
1386 "[-bs] [-w WIDTH] [FILE]..."
1387 #define fold_full_usage "\n\n" \
1388 "Wrap input lines in each FILE (or stdin), writing to stdout\n" \
1390 "\n -b Count bytes rather than columns" \
1391 "\n -s Break at spaces" \
1392 "\n -w Use WIDTH columns instead of 80" \
1394 #define free_trivial_usage \
1396 #define free_full_usage "\n\n" \
1397 "Display the amount of free and used system memory"
1398 #define free_example_usage \
1400 " total used free shared buffers\n" \
1401 " Mem: 257628 248724 8904 59644 93124\n" \
1402 " Swap: 128516 8404 120112\n" \
1403 "Total: 386144 257128 129016\n" \
1405 #define freeramdisk_trivial_usage \
1407 #define freeramdisk_full_usage "\n\n" \
1408 "Free all memory used by the specified ramdisk"
1409 #define freeramdisk_example_usage \
1410 "$ freeramdisk /dev/ram2\n"
1412 #define fsck_trivial_usage \
1413 "[-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]..."
1414 #define fsck_full_usage "\n\n" \
1415 "Check and repair filesystems\n" \
1417 "\n -A Walk /etc/fstab and check all filesystems" \
1418 "\n -N Don't execute, just show what would be done" \
1419 "\n -P With -A, check filesystems in parallel" \
1420 "\n -R With -A, skip the root filesystem" \
1421 "\n -T Don't show title on startup" \
1423 "\n -C n Write status information to specified filedescriptor" \
1424 "\n -t TYPE List of filesystem types to check" \
1426 #define fsck_minix_trivial_usage \
1427 "[-larvsmf] BLOCKDEV"
1428 #define fsck_minix_full_usage "\n\n" \
1429 "Check MINIX filesystem\n" \
1431 "\n -l List all filenames" \
1432 "\n -r Perform interactive repairs" \
1433 "\n -a Perform automatic repairs" \
1435 "\n -s Output superblock information" \
1436 "\n -m Show \"mode not cleared\" warnings" \
1437 "\n -f Force file system check" \
1439 #define ftpd_trivial_usage \
1440 "[-wvS] [-t N] [-T N] [DIR]"
1441 #define ftpd_full_usage "\n\n" \
1442 "Anonymous FTP server\n" \
1444 "ftpd should be used as an inetd service.\n" \
1445 "ftpd's line for inetd.conf:\n" \
1446 " 21 stream tcp nowait root ftpd ftpd /files/to/serve\n" \
1447 "It also can be ran from tcpsvd:\n" \
1448 " tcpsvd -vE 0.0.0.0 21 ftpd /files/to/serve\n" \
1450 "\n -w Allow upload" \
1451 "\n -v Log to stderr" \
1452 "\n -S Log to syslog" \
1453 "\n -t,-T Idle and absolute timeouts" \
1454 "\n DIR Change root to this directory" \
1456 #define ftpget_trivial_usage \
1457 "[OPTIONS] HOST [LOCAL_FILE] REMOTE_FILE"
1458 #define ftpget_full_usage "\n\n" \
1459 "Retrieve a remote file via FTP\n" \
1461 IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1462 "\n -c,--continue Continue previous transfer" \
1463 "\n -v,--verbose Verbose" \
1464 "\n -u,--username Username" \
1465 "\n -p,--password Password" \
1466 "\n -P,--port Port number" \
1468 IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1469 "\n -c Continue previous transfer" \
1473 "\n -P Port number" \
1476 #define ftpput_trivial_usage \
1477 "[OPTIONS] HOST [REMOTE_FILE] LOCAL_FILE"
1478 #define ftpput_full_usage "\n\n" \
1479 "Store a local file on a remote machine via FTP\n" \
1481 IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1482 "\n -v,--verbose Verbose" \
1483 "\n -u,--username Username" \
1484 "\n -p,--password Password" \
1485 "\n -P,--port Port number" \
1487 IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1491 "\n -P Port number" \
1494 #define fuser_trivial_usage \
1495 "[OPTIONS] FILE or PORT/PROTO"
1496 #define fuser_full_usage "\n\n" \
1497 "Find processes which use FILEs or PORTs\n" \
1499 "\n -m Find processes which use same fs as FILEs" \
1500 "\n -4 Search only IPv4 space" \
1501 "\n -6 Search only IPv6 space" \
1502 "\n -s Don't display PIDs" \
1503 "\n -k Kill found processes" \
1504 "\n -SIGNAL Signal to send (default: KILL)" \
1506 #define getenforce_trivial_usage NOUSAGE_STR
1507 #define getenforce_full_usage ""
1509 #define getopt_trivial_usage \
1511 #define getopt_full_usage "\n\n" \
1514 "\n -a,--alternative Allow long options starting with single -" \
1515 "\n -l,--longoptions=longopts Long options to be recognized" \
1516 "\n -n,--name=progname The name under which errors are reported" \
1517 "\n -o,--options=optstring Short options to be recognized" \
1518 "\n -q,--quiet Disable error reporting by getopt(3)" \
1519 "\n -Q,--quiet-output No normal output" \
1520 "\n -s,--shell=shell Set shell quoting conventions" \
1521 "\n -T,--test Test for getopt(1) version" \
1522 "\n -u,--unquoted Don't quote the output" \
1525 "\n -a Allow long options starting with single -" \
1526 "\n -l longopts Long options to be recognized" \
1527 "\n -n progname The name under which errors are reported" \
1528 "\n -o optstring Short options to be recognized" \
1529 "\n -q Disable error reporting by getopt(3)" \
1530 "\n -Q No normal output" \
1531 "\n -s shell Set shell quoting conventions" \
1532 "\n -T Test for getopt(1) version" \
1533 "\n -u Don't quote the output" \
1535 #define getopt_example_usage \
1536 "$ cat getopt.test\n" \
1538 "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
1539 " -n 'example.busybox' -- \"$@\"`\n" \
1540 "if [ $? != 0 ]; then exit 1; fi\n" \
1541 "eval set -- \"$GETOPT\"\n" \
1542 "while true; do\n" \
1544 " -a|--a-long) echo \"Option a\"; shift;;\n" \
1545 " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \
1547 " case \"$2\" in\n" \
1548 " \"\") echo \"Option c, no argument\"; shift 2;;\n" \
1549 " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \
1551 " --) shift; break;;\n" \
1552 " *) echo \"Internal error!\"; exit 1;;\n" \
1556 #define getsebool_trivial_usage \
1557 "-a or getsebool boolean..."
1558 #define getsebool_full_usage "\n\n" \
1559 " -a Show all selinux booleans"
1561 #define getty_trivial_usage \
1562 "[OPTIONS] BAUD_RATE TTY [TERMTYPE]"
1563 #define getty_full_usage "\n\n" \
1564 "Open a tty, prompt for a login name, then invoke /bin/login\n" \
1566 "\n -h Enable hardware (RTS/CTS) flow control" \
1567 "\n -i Don't display /etc/issue before running login" \
1568 "\n -L Local line, don't do carrier detect" \
1569 "\n -m Get baud rate from modem's CONNECT status message" \
1570 "\n -w Wait for a CR or LF before sending /etc/issue" \
1571 "\n -n Don't prompt the user for a login name" \
1572 "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
1573 "\n -l LOGIN Invoke LOGIN instead of /bin/login" \
1574 "\n -t SEC Terminate after SEC if no username is read" \
1575 "\n -I INITSTR Send INITSTR before anything else" \
1576 "\n -H HOST Log HOST into the utmp file as the hostname" \
1578 #define grep_trivial_usage \
1581 IF_FEATURE_GREP_EGREP_ALIAS("E") \
1582 IF_EXTRA_COMPAT("z") \
1584 IF_FEATURE_GREP_CONTEXT("[-A/B/C N] ") \
1585 "PATTERN/-e PATTERN.../-f FILE [FILE]..."
1586 #define grep_full_usage "\n\n" \
1587 "Search for PATTERN in FILEs (or stdin)\n" \
1589 "\n -H Add 'filename:' prefix" \
1590 "\n -h Do not add 'filename:' prefix" \
1591 "\n -n Add 'line_no:' prefix" \
1592 "\n -l Show only names of files that match" \
1593 "\n -L Show only names of files that don't match" \
1594 "\n -c Show only count of matching lines" \
1595 "\n -o Show only the matching part of line" \
1596 "\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \
1597 "\n -v Select non-matching lines" \
1598 "\n -s Suppress open and read errors" \
1600 "\n -i Ignore case" \
1601 "\n -w Match whole words only" \
1602 "\n -F PATTERN is a literal (not regexp)" \
1603 IF_FEATURE_GREP_EGREP_ALIAS( \
1604 "\n -E PATTERN is an extended regexp" \
1607 "\n -z Input is NUL terminated" \
1609 "\n -m N Match up to N times per file" \
1610 IF_FEATURE_GREP_CONTEXT( \
1611 "\n -A N Print N lines of trailing context" \
1612 "\n -B N Print N lines of leading context" \
1613 "\n -C N Same as '-A N -B N'" \
1615 "\n -e PTRN Pattern to match" \
1616 "\n -f FILE Read pattern from file" \
1618 #define grep_example_usage \
1619 "$ grep root /etc/passwd\n" \
1620 "root:x:0:0:root:/root:/bin/bash\n" \
1621 "$ grep ^[rR]oo. /etc/passwd\n" \
1622 "root:x:0:0:root:/root:/bin/bash\n"
1624 #define egrep_trivial_usage NOUSAGE_STR
1625 #define egrep_full_usage ""
1627 #define fgrep_trivial_usage NOUSAGE_STR
1628 #define fgrep_full_usage ""
1630 #define gunzip_trivial_usage \
1631 "[OPTIONS] [FILE]..."
1632 #define gunzip_full_usage "\n\n" \
1633 "Decompress FILEs (or stdin)\n" \
1635 "\n -c Write to stdout" \
1637 "\n -t Test file integrity" \
1639 #define gunzip_example_usage \
1640 "$ ls -la /tmp/BusyBox*\n" \
1641 "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
1642 "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
1643 "$ ls -la /tmp/BusyBox*\n" \
1644 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
1646 #define gzip_trivial_usage \
1647 "[OPTIONS] [FILE]..."
1648 #define gzip_full_usage "\n\n" \
1649 "Compress FILEs (or stdin)\n" \
1651 "\n -d Decompress" \
1652 "\n -c Write to stdout" \
1655 #define gzip_example_usage \
1656 "$ ls -la /tmp/busybox*\n" \
1657 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
1658 "$ gzip /tmp/busybox.tar\n" \
1659 "$ ls -la /tmp/busybox*\n" \
1660 "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
1662 #define halt_trivial_usage \
1663 "[-d DELAY] [-n] [-f]" IF_FEATURE_WTMP(" [-w]")
1664 #define halt_full_usage "\n\n" \
1665 "Halt the system\n" \
1667 "\n -d Delay interval for halting" \
1668 "\n -n No call to sync()" \
1669 "\n -f Force halt (don't go through init)" \
1671 "\n -w Only write a wtmp record" \
1674 #define hdparm_trivial_usage \
1675 "[OPTIONS] [DEVICE]"
1676 #define hdparm_full_usage "\n\n" \
1678 "\n -a Get/set fs readahead" \
1679 "\n -A Set drive read-lookahead flag (0/1)" \
1680 "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \
1681 "\n -B Set Advanced Power Management setting (1-255)" \
1682 "\n -c Get/set IDE 32-bit IO setting" \
1683 "\n -C Check IDE power mode status" \
1684 IF_FEATURE_HDPARM_HDIO_GETSET_DMA( \
1685 "\n -d Get/set using_dma flag") \
1686 "\n -D Enable/disable drive defect-mgmt" \
1687 "\n -f Flush buffer cache for device on exit" \
1688 "\n -g Display drive geometry" \
1689 "\n -h Display terse usage information" \
1690 IF_FEATURE_HDPARM_GET_IDENTITY( \
1691 "\n -i Display drive identification") \
1692 IF_FEATURE_HDPARM_GET_IDENTITY( \
1693 "\n -I Detailed/current information directly from drive") \
1694 "\n -k Get/set keep_settings_over_reset flag (0/1)" \
1695 "\n -K Set drive keep_features_over_reset flag (0/1)" \
1696 "\n -L Set drive doorlock (0/1) (removable harddisks only)" \
1697 "\n -m Get/set multiple sector count" \
1698 "\n -n Get/set ignore-write-errors flag (0/1)" \
1699 "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \
1700 "\n -P Set drive prefetch count" \
1701 /* "\n -q Change next setting quietly" - not supported ib bbox */ \
1702 "\n -Q Get/set DMA tagged-queuing depth (if supported)" \
1703 "\n -r Get/set readonly flag (DANGEROUS to set)" \
1704 IF_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
1705 "\n -R Register an IDE interface (DANGEROUS)") \
1706 "\n -S Set standby (spindown) timeout" \
1707 "\n -t Perform device read timings" \
1708 "\n -T Perform cache read timings" \
1709 "\n -u Get/set unmaskirq flag (0/1)" \
1710 IF_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
1711 "\n -U Unregister an IDE interface (DANGEROUS)") \
1712 "\n -v Defaults; same as -mcudkrag for IDE drives" \
1713 "\n -V Display program version and exit immediately" \
1714 IF_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
1715 "\n -w Perform device reset (DANGEROUS)") \
1716 "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \
1717 IF_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
1718 "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \
1719 "\n -X Set IDE xfer mode (DANGEROUS)" \
1720 "\n -y Put IDE drive in standby mode" \
1721 "\n -Y Put IDE drive to sleep" \
1722 "\n -Z Disable Seagate auto-powersaving mode" \
1723 "\n -z Reread partition table" \
1725 #define head_trivial_usage \
1726 "[OPTIONS] [FILE]..."
1727 #define head_full_usage "\n\n" \
1728 "Print first 10 lines of each FILE (or stdin) to stdout.\n" \
1729 "With more than one FILE, precede each with a filename header.\n" \
1731 "\n -n N[kbm] Print first N lines" \
1732 IF_FEATURE_FANCY_HEAD( \
1733 "\n -c N[kbm] Print first N bytes" \
1734 "\n -q Never print headers" \
1735 "\n -v Always print headers" \
1738 "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
1740 #define head_example_usage \
1741 "$ head -n 2 /etc/passwd\n" \
1742 "root:x:0:0:root:/root:/bin/bash\n" \
1743 "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
1745 #define tail_trivial_usage \
1746 "[OPTIONS] [FILE]..."
1747 #define tail_full_usage "\n\n" \
1748 "Print last 10 lines of each FILE (or stdin) to stdout.\n" \
1749 "With more than one FILE, precede each with a filename header.\n" \
1751 "\n -f Print data as file grows" \
1752 IF_FEATURE_FANCY_TAIL( \
1753 "\n -s SECONDS Wait SECONDS between reads with -f" \
1755 "\n -n N[kbm] Print last N lines" \
1756 IF_FEATURE_FANCY_TAIL( \
1757 "\n -c N[kbm] Print last N bytes" \
1758 "\n -q Never print headers" \
1759 "\n -v Always print headers" \
1761 "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
1762 "\nIf N starts with a '+', output begins with the Nth item from the start" \
1763 "\nof each file, not from the end." \
1766 #define tail_example_usage \
1767 "$ tail -n 1 /etc/resolv.conf\n" \
1768 "nameserver 10.0.0.1\n"
1770 #define hexdump_trivial_usage \
1771 "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..."
1772 #define hexdump_full_usage "\n\n" \
1773 "Display FILEs (or stdin) in a user specified format\n" \
1775 "\n -b One-byte octal display" \
1776 "\n -c One-byte character display" \
1777 "\n -C Canonical hex+ASCII, 16 bytes per line" \
1778 "\n -d Two-byte decimal display" \
1779 "\n -e FORMAT STRING" \
1780 "\n -f FORMAT FILE" \
1781 "\n -n LENGTH Interpret only LENGTH bytes of input" \
1782 "\n -o Two-byte octal display" \
1783 "\n -s OFFSET Skip OFFSET bytes" \
1784 "\n -v Display all input data" \
1785 "\n -x Two-byte hexadecimal display" \
1786 IF_FEATURE_HEXDUMP_REVERSE( \
1787 "\n -R Reverse of 'hexdump -Cv'") \
1789 #define hd_trivial_usage \
1791 #define hd_full_usage "\n\n" \
1792 "hd is an alias for hexdump -C"
1794 #define hostid_trivial_usage \
1796 #define hostid_full_usage "\n\n" \
1797 "Print out a unique 32-bit identifier for the machine"
1799 #define hostname_trivial_usage \
1800 "[OPTIONS] [HOSTNAME | -F FILE]"
1801 #define hostname_full_usage "\n\n" \
1802 "Get or set hostname or DNS domain name\n" \
1805 "\n -i Addresses for the hostname" \
1806 "\n -d DNS domain name" \
1807 "\n -f Fully qualified domain name" \
1808 "\n -F FILE Use FILE's content as hostname" \
1810 #define hostname_example_usage \
1814 #define dnsdomainname_trivial_usage NOUSAGE_STR
1815 #define dnsdomainname_full_usage ""
1817 #define httpd_trivial_usage \
1821 IF_FEATURE_HTTPD_SETUID(" [-u USER[:GRP]]") \
1822 IF_FEATURE_HTTPD_BASIC_AUTH(" [-r REALM]") \
1824 "or httpd -d/-e" IF_FEATURE_HTTPD_AUTH_MD5("/-m") " STRING"
1825 #define httpd_full_usage "\n\n" \
1826 "Listen for incoming HTTP requests\n" \
1828 "\n -i Inetd mode" \
1829 "\n -f Don't daemonize" \
1830 "\n -v[v] Verbose" \
1831 "\n -p [IP:]PORT Bind to ip:port (default *:80)" \
1832 IF_FEATURE_HTTPD_SETUID( \
1833 "\n -u USER[:GRP] Set uid/gid after binding to port") \
1834 IF_FEATURE_HTTPD_BASIC_AUTH( \
1835 "\n -r REALM Authentication Realm for Basic Authentication") \
1836 "\n -h HOME Home directory (default .)" \
1837 "\n -c FILE Configuration file (default {/etc,HOME}/httpd.conf)" \
1838 IF_FEATURE_HTTPD_AUTH_MD5( \
1839 "\n -m STRING MD5 crypt STRING") \
1840 "\n -e STRING HTML encode STRING" \
1841 "\n -d STRING URL decode STRING" \
1843 #define hwclock_trivial_usage \
1844 IF_FEATURE_HWCLOCK_LONG_OPTIONS( \
1845 "[-r|--show] [-s|--hctosys] [-w|--systohc]" \
1846 " [-l|--localtime] [-u|--utc]" \
1849 IF_NOT_FEATURE_HWCLOCK_LONG_OPTIONS( \
1850 "[-r] [-s] [-w] [-l] [-u] [-f FILE]" \
1852 #define hwclock_full_usage "\n\n" \
1853 "Query and set hardware clock (RTC)\n" \
1855 "\n -r Show hardware clock time" \
1856 "\n -s Set system time from hardware clock" \
1857 "\n -w Set hardware clock to system time" \
1858 "\n -u Hardware clock is in UTC" \
1859 "\n -l Hardware clock is in local time" \
1860 "\n -f FILE Use specified device (e.g. /dev/rtc2)" \
1862 #define id_trivial_usage \
1864 #define id_full_usage "\n\n" \
1865 "Print information about USER or the current user\n" \
1868 "\n -Z Print the security context" \
1870 "\n -u Print user ID" \
1871 "\n -g Print group ID" \
1872 "\n -G Print supplementary group IDs" \
1873 "\n -n Print name instead of a number" \
1874 "\n -r Print real user ID instead of effective ID" \
1876 #define id_example_usage \
1878 "uid=1000(andersen) gid=1000(andersen)\n"
1880 #define ifconfig_trivial_usage \
1881 IF_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
1882 #define ifconfig_full_usage "\n\n" \
1883 "Configure a network interface\n" \
1887 " [add ADDRESS[/PREFIXLEN]]\n") \
1889 " [del ADDRESS[/PREFIXLEN]]\n") \
1890 " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \
1891 " [netmask ADDRESS] [dstaddr ADDRESS]\n" \
1892 IF_FEATURE_IFCONFIG_SLIP( \
1893 " [outfill NN] [keepalive NN]\n") \
1894 " " IF_FEATURE_IFCONFIG_HW("[hw ether" IF_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \
1895 " [[-]trailers] [[-]arp] [[-]allmulti]\n" \
1896 " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \
1897 IF_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
1898 " [mem_start NN] [io_addr NN] [irq NN]\n") \
1901 #define ifenslave_trivial_usage \
1902 "[-cdf] MASTER_IFACE SLAVE_IFACE..."
1903 #define ifenslave_full_usage "\n\n" \
1904 "Configure network interfaces for parallel routing\n" \
1906 "\n -c, --change-active Change active slave" \
1907 "\n -d, --detach Remove slave interface from bonding device" \
1908 "\n -f, --force Force, even if interface is not Ethernet" \
1909 /* "\n -r, --receive-slave Create a receive-only slave" */
1911 #define ifenslave_example_usage \
1912 "To create a bond device, simply follow these three steps:\n" \
1913 "- ensure that the required drivers are properly loaded:\n" \
1914 " # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \
1915 "- assign an IP address to the bond device:\n" \
1916 " # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n" \
1917 "- attach all the interfaces you need to the bond device:\n" \
1918 " # ifenslave bond0 eth0 eth1 eth2\n" \
1919 " If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \
1920 " interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \
1921 " To detach a dead interface without setting the bond device down:\n" \
1922 " # ifenslave -d bond0 eth1\n\n" \
1923 " To set the bond device down and automatically release all the slaves:\n" \
1924 " # ifconfig bond0 down\n\n" \
1925 " To change active slave:\n" \
1926 " # ifenslave -c bond0 eth0\n" \
1928 #define ifplugd_trivial_usage \
1930 #define ifplugd_full_usage "\n\n" \
1931 "Network interface plug detection daemon\n" \
1933 "\n -n Don't daemonize" \
1934 "\n -s Don't log to syslog" \
1935 "\n -i IFACE Interface" \
1936 "\n -f/-F Treat link detection error as link down/link up" \
1937 "\n (otherwise exit on error)" \
1938 "\n -a Don't up interface at each link probe" \
1939 "\n -M Monitor creation/destruction of interface" \
1940 "\n (otherwise it must exist)" \
1941 "\n -r PROG Script to run" \
1942 "\n -x ARG Extra argument for script" \
1943 "\n -I Don't exit on nonzero exit code from script" \
1944 "\n -p Don't run script on daemon startup" \
1945 "\n -q Don't run script on daemon quit" \
1946 "\n -l Run script on startup even if no cable is detected" \
1947 "\n -t SECS Poll time in seconds" \
1948 "\n -u SECS Delay before running script after link up" \
1949 "\n -d SECS Delay after link down" \
1950 "\n -m MODE API mode (mii, priv, ethtool, wlan, iff, auto)" \
1951 "\n -k Kill running daemon" \
1953 #define ifup_trivial_usage \
1954 "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] IFACE..."
1955 #define ifup_full_usage "\n\n" \
1957 "\n -a De/configure all interfaces automatically" \
1958 "\n -i FILE Use FILE for interface definitions" \
1959 "\n -n Print out what would happen, but don't do it" \
1960 IF_FEATURE_IFUPDOWN_MAPPING( \
1961 "\n (note: doesn't disable mappings)" \
1962 "\n -m Don't run any mappings" \
1964 "\n -v Print out what would happen before doing it" \
1965 "\n -f Force de/configuration" \
1967 #define ifdown_trivial_usage \
1968 "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..."
1969 #define ifdown_full_usage "\n\n" \
1971 "\n -a De/configure all interfaces automatically" \
1972 "\n -i FILE Use FILE for interface definitions" \
1973 "\n -n Print out what would happen, but don't do it" \
1974 IF_FEATURE_IFUPDOWN_MAPPING( \
1975 "\n (note: doesn't disable mappings)" \
1976 "\n -m Don't run any mappings" \
1978 "\n -v Print out what would happen before doing it" \
1979 "\n -f Force de/configuration" \
1981 #define inetd_trivial_usage \
1982 "[-fe] [-q N] [-R N] [CONFFILE]"
1983 #define inetd_full_usage "\n\n" \
1984 "Listen for network connections and launch programs\n" \
1986 "\n -f Run in foreground" \
1987 "\n -e Log to stderr" \
1988 "\n -q N Socket listen queue (default: 128)" \
1989 "\n -R N Pause services after N connects/min" \
1990 "\n (default: 0 - disabled)" \
1992 #define init_trivial_usage \
1994 #define init_full_usage "\n\n" \
1995 "Init is the parent of all processes"
1997 #define init_notes_usage \
1998 "This version of init is designed to be run only by the kernel.\n" \
2000 "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
2001 "the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \
2002 "runlevels, use sysvinit.\n" \
2004 "BusyBox init works just fine without an inittab. If no inittab is found,\n" \
2005 "it has the following default behavior:\n" \
2007 " ::sysinit:/etc/init.d/rcS\n" \
2008 " ::askfirst:/bin/sh\n" \
2009 " ::ctrlaltdel:/sbin/reboot\n" \
2010 " ::shutdown:/sbin/swapoff -a\n" \
2011 " ::shutdown:/bin/umount -a -r\n" \
2012 " ::restart:/sbin/init\n" \
2014 "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
2016 " tty2::askfirst:/bin/sh\n" \
2017 " tty3::askfirst:/bin/sh\n" \
2018 " tty4::askfirst:/bin/sh\n" \
2020 "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
2022 " <id>:<runlevels>:<action>:<process>\n" \
2026 " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
2027 " The id field is used by BusyBox init to specify the controlling tty for\n" \
2028 " the specified process to run on. The contents of this field are\n" \
2029 " appended to \"/dev/\" and used as-is. There is no need for this field to\n" \
2030 " be unique, although if it isn't you may have strange results. If this\n" \
2031 " field is left blank, the controlling tty is set to the console. Also\n" \
2032 " note that if BusyBox detects that a serial console is in use, then only\n" \
2033 " entries whose controlling tty is either the serial console or /dev/null\n" \
2034 " will be run. BusyBox init does nothing with utmp. We don't need no\n" \
2035 " stinkin' utmp.\n" \
2039 " The runlevels field is completely ignored.\n" \
2043 " Valid actions include: sysinit, respawn, askfirst, wait,\n" \
2044 " once, restart, ctrlaltdel, and shutdown.\n" \
2046 " The available actions can be classified into two groups: actions\n" \
2047 " that are run only once, and actions that are re-run when the specified\n" \
2048 " process exits.\n" \
2050 " Run only-once actions:\n" \
2052 " 'sysinit' is the first item run on boot. init waits until all\n" \
2053 " sysinit actions are completed before continuing. Following the\n" \
2054 " completion of all sysinit actions, all 'wait' actions are run.\n" \
2055 " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
2056 " the specified task completes. 'once' actions are asynchronous,\n" \
2057 " therefore, init does not wait for them to complete. 'restart' is\n" \
2058 " the action taken to restart the init process. By default this should\n" \
2059 " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
2060 " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
2061 " actions are run when the system detects that someone on the system\n" \
2062 " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
2063 " wants to run 'reboot' at this point to cause the system to reboot.\n" \
2064 " Finally the 'shutdown' action specifies the actions to taken when\n" \
2065 " init is told to reboot. Unmounting filesystems and disabling swap\n" \
2066 " is a very good here.\n" \
2068 " Run repeatedly actions:\n" \
2070 " 'respawn' actions are run after the 'once' actions. When a process\n" \
2071 " started with a 'respawn' action exits, init automatically restarts\n" \
2072 " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
2073 " respawning out of control. The 'askfirst' actions acts just like\n" \
2074 " respawn, except that before running the specified process it\n" \
2075 " displays the line \"Please press Enter to activate this console.\"\n" \
2076 " and then waits for the user to press enter before starting the\n" \
2077 " specified process.\n" \
2079 " Unrecognized actions (like initdefault) will cause init to emit an\n" \
2080 " error message, and then go along with its business. All actions are\n" \
2081 " run in the order they appear in /etc/inittab.\n" \
2085 " Specifies the process to be executed and its command line.\n" \
2087 "Example /etc/inittab file:\n" \
2089 " # This is run first except when booting in single-user mode\n" \
2091 " ::sysinit:/etc/init.d/rcS\n" \
2093 " # /bin/sh invocations on selected ttys\n" \
2095 " # Start an \"askfirst\" shell on the console (whatever that may be)\n" \
2096 " ::askfirst:-/bin/sh\n" \
2097 " # Start an \"askfirst\" shell on /dev/tty2-4\n" \
2098 " tty2::askfirst:-/bin/sh\n" \
2099 " tty3::askfirst:-/bin/sh\n" \
2100 " tty4::askfirst:-/bin/sh\n" \
2102 " # /sbin/getty invocations for selected ttys\n" \
2104 " tty4::respawn:/sbin/getty 38400 tty4\n" \
2105 " tty5::respawn:/sbin/getty 38400 tty5\n" \
2108 " # Example of how to put a getty on a serial line (for a terminal)\n" \
2110 " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
2111 " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
2113 " # Example how to put a getty on a modem line\n" \
2114 " #::respawn:/sbin/getty 57600 ttyS2\n" \
2116 " # Stuff to do when restarting the init process\n" \
2117 " ::restart:/sbin/init\n" \
2119 " # Stuff to do before rebooting\n" \
2120 " ::ctrlaltdel:/sbin/reboot\n" \
2121 " ::shutdown:/bin/umount -a -r\n" \
2122 " ::shutdown:/sbin/swapoff -a\n"
2124 #define inotifyd_trivial_usage \
2125 "PROG FILE1[:MASK]..."
2126 #define inotifyd_full_usage "\n\n" \
2127 "Run PROG on filesystem changes." \
2128 "\nWhen a filesystem event matching MASK occurs on FILEn," \
2129 "\nPROG ACTUAL_EVENTS FILEn [SUBFILE] is run." \
2131 "\n a File is accessed" \
2132 "\n c File is modified" \
2133 "\n e Metadata changed" \
2134 "\n w Writable file is closed" \
2135 "\n 0 Unwritable file is closed" \
2136 "\n r File is opened" \
2137 "\n D File is deleted" \
2138 "\n M File is moved" \
2139 "\n u Backing fs is unmounted" \
2140 "\n o Event queue overflowed" \
2141 "\n x File can't be watched anymore" \
2142 "\nIf watching a directory:" \
2143 "\n m Subfile is moved into dir" \
2144 "\n y Subfile is moved out of dir" \
2145 "\n n Subfile is created" \
2146 "\n d Subfile is deleted" \
2148 "\ninotifyd waits for PROG to exit." \
2149 "\nWhen x event happens for all FILEs, inotifyd exits." \
2151 /* -v, -b, -c are ignored */
2152 #define install_trivial_usage \
2153 "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [SOURCE]... DEST"
2154 #define install_full_usage "\n\n" \
2155 "Copy files and set attributes\n" \
2157 "\n -c Just copy (default)" \
2158 "\n -d Create directories" \
2159 "\n -D Create leading target directories" \
2160 "\n -s Strip symbol table" \
2161 "\n -p Preserve date" \
2162 "\n -o USER Set ownership" \
2163 "\n -g GRP Set group ownership" \
2164 "\n -m MODE Set permissions" \
2166 "\n -Z Set security context" \
2169 #define ionice_trivial_usage \
2170 "[-c 1-3] [-n 0-7] [-p PID] [PROG]"
2171 #define ionice_full_usage "\n\n" \
2172 "Change I/O scheduling class and priority\n" \
2174 "\n -c Class. 1:realtime 2:best-effort 3:idle" \
2177 /* would need to make the " | " optional depending on more than one selected: */
2178 #define ip_trivial_usage \
2180 IF_FEATURE_IP_ADDRESS("address | ") \
2181 IF_FEATURE_IP_ROUTE("route | ") \
2182 IF_FEATURE_IP_LINK("link | ") \
2183 IF_FEATURE_IP_TUNNEL("tunnel | ") \
2184 IF_FEATURE_IP_RULE("rule") \
2186 #define ip_full_usage "\n\n" \
2187 "ip [OPTIONS] OBJECT {COMMAND}\n" \
2188 "where OBJECT := {" \
2189 IF_FEATURE_IP_ADDRESS("address | ") \
2190 IF_FEATURE_IP_ROUTE("route | ") \
2191 IF_FEATURE_IP_LINK("link | ") \
2192 IF_FEATURE_IP_TUNNEL("tunnel | ") \
2193 IF_FEATURE_IP_RULE("rule") \
2195 "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \
2197 #define ipaddr_trivial_usage \
2198 "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
2199 " [dev STRING] [to PREFIX] }"
2200 #define ipaddr_full_usage "\n\n" \
2201 "ipaddr {add|delete} IFADDR dev STRING\n" \
2202 "ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \
2203 " [to PREFIX] [label PATTERN]\n" \
2204 " IFADDR := PREFIX | ADDR peer PREFIX\n" \
2205 " [broadcast ADDR] [anycast ADDR]\n" \
2206 " [label STRING] [scope SCOPE-ID]\n" \
2207 " SCOPE-ID := [host | link | global | NUMBER]" \
2209 #define ipcalc_trivial_usage \
2210 "[OPTIONS] ADDRESS[[/]NETMASK] [NETMASK]"
2211 #define ipcalc_full_usage "\n\n" \
2212 "Calculate IP network settings from a IP address\n" \
2214 IF_FEATURE_IPCALC_LONG_OPTIONS( \
2215 "\n -b,--broadcast Display calculated broadcast address" \
2216 "\n -n,--network Display calculated network address" \
2217 "\n -m,--netmask Display default netmask for IP" \
2218 IF_FEATURE_IPCALC_FANCY( \
2219 "\n -p,--prefix Display the prefix for IP/NETMASK" \
2220 "\n -h,--hostname Display first resolved host name" \
2221 "\n -s,--silent Don't ever display error messages" \
2224 IF_NOT_FEATURE_IPCALC_LONG_OPTIONS( \
2225 "\n -b Display calculated broadcast address" \
2226 "\n -n Display calculated network address" \
2227 "\n -m Display default netmask for IP" \
2228 IF_FEATURE_IPCALC_FANCY( \
2229 "\n -p Display the prefix for IP/NETMASK" \
2230 "\n -h Display first resolved host name" \
2231 "\n -s Don't ever display error messages" \
2235 #define ipcrm_trivial_usage \
2236 "[-MQS key] [-mqs id]"
2237 #define ipcrm_full_usage "\n\n" \
2238 "Upper-case options MQS remove an object by shmkey value.\n" \
2239 "Lower-case options remove an object by shmid value.\n" \
2241 "\n -mM Remove memory segment after last detach" \
2242 "\n -qQ Remove message queue" \
2243 "\n -sS Remove semaphore" \
2245 #define ipcs_trivial_usage \
2246 "[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
2247 #define ipcs_full_usage "\n\n" \
2248 " -i Show specific resource" \
2249 "\nResource specification:" \
2250 "\n -m Shared memory segments" \
2251 "\n -q Message queues" \
2252 "\n -s Semaphore arrays" \
2253 "\n -a All (default)" \
2254 "\nOutput format:" \
2261 #define iplink_trivial_usage \
2262 "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }"
2263 #define iplink_full_usage "\n\n" \
2264 "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
2265 " dynamic { on | off } |\n" \
2267 "iplink show [DEVICE]" \
2269 #define iproute_trivial_usage \
2270 "{ list | flush | { add | del | change | append |\n" \
2271 " replace | monitor } ROUTE }"
2272 #define iproute_full_usage "\n\n" \
2273 "iproute { list | flush } SELECTOR\n" \
2274 "iproute get ADDRESS [from ADDRESS iif STRING]\n" \
2275 " [oif STRING] [tos TOS]\n" \
2276 "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
2277 " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \
2278 " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]\n" \
2279 " [metric METRIC]" \
2281 #define iprule_trivial_usage \
2282 "{[list | add | del] RULE}"
2283 #define iprule_full_usage "\n\n" \
2284 "iprule [list | add | del] SELECTOR ACTION\n" \
2285 " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \
2286 " [dev STRING] [pref NUMBER]\n" \
2287 " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \
2288 " [prohibit | reject | unreachable]\n" \
2289 " [realms [SRCREALM/]DSTREALM]\n" \
2290 " TABLE_ID := [local | main | default | NUMBER]" \
2292 #define iptunnel_trivial_usage \
2293 "{ add | change | del | show } [NAME]\n" \
2294 " [mode { ipip | gre | sit }]\n" \
2295 " [remote ADDR] [local ADDR] [ttl TTL]"
2296 #define iptunnel_full_usage "\n\n" \
2297 "iptunnel { add | change | del | show } [NAME]\n" \
2298 " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \
2299 " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
2300 " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \
2302 #define kbd_mode_trivial_usage \
2303 "[-a|k|s|u] [-C TTY]"
2304 #define kbd_mode_full_usage "\n\n" \
2305 "Report or set the keyboard mode\n" \
2307 "\n -a Default (ASCII)" \
2308 "\n -k Medium-raw (keyboard)" \
2309 "\n -s Raw (scancode)" \
2310 "\n -u Unicode (utf-8)" \
2311 "\n -C TTY Affect TTY instead of /dev/tty" \
2313 #define kill_trivial_usage \
2314 "[-l] [-SIG] PID..."
2315 #define kill_full_usage "\n\n" \
2316 "Send a signal (default: TERM) to given PIDs\n" \
2318 "\n -l List all signal names and numbers" \
2319 /* "\n -s SIG Yet another way of specifying SIG" */ \
2321 #define kill_example_usage \
2322 "$ ps | grep apache\n" \
2323 "252 root root S [apache]\n" \
2324 "263 www-data www-data S [apache]\n" \
2325 "264 www-data www-data S [apache]\n" \
2326 "265 www-data www-data S [apache]\n" \
2327 "266 www-data www-data S [apache]\n" \
2328 "267 www-data www-data S [apache]\n" \
2331 #define killall_trivial_usage \
2332 "[-l] [-q] [-SIG] PROCESS_NAME..."
2333 #define killall_full_usage "\n\n" \
2334 "Send a signal (default: TERM) to given processes\n" \
2336 "\n -l List all signal names and numbers" \
2337 /* "\n -s SIG Yet another way of specifying SIG" */ \
2338 "\n -q Don't complain if no processes were killed" \
2340 #define killall_example_usage \
2341 "$ killall apache\n"
2343 #define killall5_trivial_usage \
2344 "[-l] [-SIG] [-o PID]..."
2345 #define killall5_full_usage "\n\n" \
2346 "Send a signal (default: TERM) to all processes outside current session\n" \
2348 "\n -l List all signal names and numbers" \
2349 "\n -o PID Don't signal this PID" \
2350 /* "\n -s SIG Yet another way of specifying SIG" */ \
2352 #define klogd_trivial_usage \
2354 #define klogd_full_usage "\n\n" \
2357 "\n -c N Only messages with level < N are printed to console" \
2358 "\n -n Run in foreground" \
2360 #define length_trivial_usage \
2362 #define length_full_usage "\n\n" \
2363 "Print STRING's length"
2365 #define length_example_usage \
2366 "$ length Hello\n" \
2369 #define less_trivial_usage \
2370 "[-EMNmh~I?] [FILE]..."
2371 #define less_full_usage "\n\n" \
2372 "View FILE (or stdin) one screenful at a time\n" \
2374 "\n -E Quit once the end of a file is reached" \
2375 "\n -M,-m Display status line with line numbers" \
2376 "\n and percentage through the file" \
2377 "\n -N Prefix line number to each line" \
2378 "\n -I Ignore case in all searches" \
2379 "\n -~ Suppress ~s displayed past the end of the file" \
2381 #define linux32_trivial_usage NOUSAGE_STR
2382 #define linux32_full_usage ""
2383 #define linux64_trivial_usage NOUSAGE_STR
2384 #define linux64_full_usage ""
2386 #define linuxrc_trivial_usage NOUSAGE_STR
2387 #define linuxrc_full_usage ""
2389 #define setarch_trivial_usage \
2390 "personality PROG ARGS"
2391 #define setarch_full_usage "\n\n" \
2392 "Personality may be:\n" \
2393 " linux32 Set 32bit uname emulation\n" \
2394 " linux64 Set 64bit uname emulation" \
2396 #define ln_trivial_usage \
2397 "[OPTIONS] TARGET... LINK|DIR"
2398 #define ln_full_usage "\n\n" \
2399 "Create a link LINK or DIR/TARGET to the specified TARGET(s)\n" \
2401 "\n -s Make symlinks instead of hardlinks" \
2402 "\n -f Remove existing destinations" \
2403 "\n -n Don't dereference symlinks - treat like normal file" \
2404 "\n -b Make a backup of the target (if exists) before link operation" \
2405 "\n -S suf Use suffix instead of ~ when making backup files" \
2407 #define ln_example_usage \
2408 "$ ln -s BusyBox /tmp/ls\n" \
2409 "$ ls -l /tmp/ls\n" \
2410 "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
2412 #define load_policy_trivial_usage NOUSAGE_STR
2413 #define load_policy_full_usage ""
2415 #define loadfont_trivial_usage \
2417 #define loadfont_full_usage "\n\n" \
2418 "Load a console font from stdin" \
2419 /* "\n -C TTY Affect TTY instead of /dev/tty" */ \
2421 #define loadfont_example_usage \
2422 "$ loadfont < /etc/i18n/fontname\n"
2424 #define loadkmap_trivial_usage \
2426 #define loadkmap_full_usage "\n\n" \
2427 "Load a binary keyboard translation table from stdin\n" \
2428 /* "\n -C TTY Affect TTY instead of /dev/tty" */ \
2430 #define loadkmap_example_usage \
2431 "$ loadkmap < /etc/i18n/lang-keymap\n"
2433 #define logger_trivial_usage \
2434 "[OPTIONS] [MESSAGE]"
2435 #define logger_full_usage "\n\n" \
2436 "Write MESSAGE (or stdin) to syslog\n" \
2438 "\n -s Log to stderr as well as the system log" \
2439 "\n -t TAG Log using the specified tag (defaults to user name)" \
2440 "\n -p PRIO Priority (numeric or facility.level pair)" \
2442 #define logger_example_usage \
2443 "$ logger \"hello\"\n"
2445 #define login_trivial_usage \
2446 "[-p] [-h HOST] [[-f] USER]"
2447 #define login_full_usage "\n\n" \
2448 "Begin a new session on the system\n" \
2450 "\n -f Don't authenticate (user already authenticated)" \
2451 "\n -h Name of the remote host" \
2452 "\n -p Preserve environment" \
2454 #define logname_trivial_usage \
2456 #define logname_full_usage "\n\n" \
2457 "Print the name of the current user"
2458 #define logname_example_usage \
2462 #define logread_trivial_usage \
2464 #define logread_full_usage "\n\n" \
2465 "Show messages in syslogd's circular buffer\n" \
2467 "\n -f Output data as log grows" \
2469 #define losetup_trivial_usage \
2470 "[-o OFS] LOOPDEV FILE - associate loop devices\n" \
2471 " losetup -d LOOPDEV - disassociate\n" \
2472 " losetup [-f] - show"
2473 #define losetup_full_usage "\n\n" \
2475 "\n -o OFS Start OFS bytes into FILE" \
2476 "\n -f Show first free loop device" \
2478 #define losetup_notes_usage \
2479 "No arguments will display all current associations.\n" \
2480 "One argument (losetup /dev/loop1) will display the current association\n" \
2481 "(if any), or disassociate it (with -d). The display shows the offset\n" \
2482 "and filename of the file the loop device is currently bound to.\n\n" \
2483 "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
2484 "with an optional offset (-o 12345). Encryption is not yet supported.\n" \
2485 "losetup -f will show the first loop free loop device\n\n"
2487 #define lpd_trivial_usage \
2488 "SPOOLDIR [HELPER [ARGS]]"
2489 #define lpd_full_usage "\n\n" \
2490 "SPOOLDIR must contain (symlinks to) device nodes or directories" \
2491 "\nwith names matching print queue names. In the first case, jobs are" \
2492 "\nsent directly to the device. Otherwise each job is stored in queue" \
2493 "\ndirectory and HELPER program is called. Name of file to print" \
2494 "\nis passed in $DATAFILE variable." \
2496 "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \
2498 #define lpq_trivial_usage \
2499 "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID]... [-fs]"
2500 #define lpq_full_usage "\n\n" \
2502 "\n -P lp service to connect to (else uses $PRINTER)" \
2503 "\n -d Delete jobs" \
2504 "\n -f Force any waiting job to be printed" \
2505 "\n -s Short display" \
2507 #define lpr_trivial_usage \
2508 "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE]..."
2509 /* -C CLASS exists too, not shown.
2510 * CLASS is supposed to be printed on banner page, if one is requested */
2511 #define lpr_full_usage "\n\n" \
2513 "\n -P lp service to connect to (else uses $PRINTER)"\
2514 "\n -m Send mail on completion" \
2515 "\n -h Print banner page too" \
2518 #define ls_trivial_usage \
2519 "[-1Aa" IF_FEATURE_LS_TIMESTAMPS("c") "Cd" \
2520 IF_FEATURE_LS_TIMESTAMPS("e") IF_FEATURE_LS_FILETYPES("F") "iln" \
2521 IF_FEATURE_LS_FILETYPES("p") IF_FEATURE_LS_FOLLOWLINKS("L") \
2522 IF_FEATURE_LS_RECURSIVE("R") IF_FEATURE_LS_SORTFILES("rS") "s" \
2523 IF_FEATURE_AUTOWIDTH("T") IF_FEATURE_LS_TIMESTAMPS("tu") \
2524 IF_FEATURE_LS_SORTFILES("v") IF_FEATURE_AUTOWIDTH("w") "x" \
2525 IF_FEATURE_LS_SORTFILES("X") IF_FEATURE_HUMAN_READABLE("h") "k" \
2526 IF_SELINUX("K") "] [FILE]..."
2527 #define ls_full_usage "\n\n" \
2528 "List directory contents\n" \
2530 "\n -1 List in a single column" \
2531 "\n -A Don't list . and .." \
2532 "\n -a Don't hide entries starting with ." \
2533 "\n -C List by columns" \
2534 IF_FEATURE_LS_TIMESTAMPS( \
2535 "\n -c With -l: sort by ctime") \
2536 IF_FEATURE_LS_COLOR( \
2537 "\n --color[={always,never,auto}] Control coloring") \
2538 "\n -d List directory entries instead of contents" \
2539 IF_FEATURE_LS_TIMESTAMPS( \
2540 "\n -e List full date and time") \
2541 IF_FEATURE_LS_FILETYPES( \
2542 "\n -F Append indicator (one of */=@|) to entries") \
2543 "\n -i List inode numbers" \
2544 "\n -l Long listing format" \
2545 "\n -n List numeric UIDs and GIDs instead of names" \
2546 IF_FEATURE_LS_FILETYPES( \
2547 "\n -p Append indicator (one of /=@|) to entries") \
2548 IF_FEATURE_LS_FOLLOWLINKS( \
2549 "\n -L List entries pointed to by symlinks") \
2550 IF_FEATURE_LS_RECURSIVE( \
2552 IF_FEATURE_LS_SORTFILES( \
2553 "\n -r Sort in reverse order") \
2554 IF_FEATURE_LS_SORTFILES( \
2555 "\n -S Sort by file size") \
2556 "\n -s List the size of each file, in blocks" \
2557 IF_FEATURE_AUTOWIDTH( \
2558 "\n -T N Assume tabstop every N columns") \
2559 IF_FEATURE_LS_TIMESTAMPS( \
2560 "\n -t With -l: sort by modification time") \
2561 IF_FEATURE_LS_TIMESTAMPS( \
2562 "\n -u With -l: sort by access time") \
2563 IF_FEATURE_LS_SORTFILES( \
2564 "\n -v Sort by version") \
2565 IF_FEATURE_AUTOWIDTH( \
2566 "\n -w N Assume the terminal is N columns wide") \
2567 "\n -x List by lines" \
2568 IF_FEATURE_LS_SORTFILES( \
2569 "\n -X Sort by extension") \
2570 IF_FEATURE_HUMAN_READABLE( \
2571 "\n -h List sizes in human readable format (1K 243M 2G)") \
2573 "\n -k List security context") \
2575 "\n -K List security context in long format") \
2577 "\n -Z List security context and permission") \
2579 #define lsattr_trivial_usage \
2580 "[-Radlv] [FILE]..."
2581 #define lsattr_full_usage "\n\n" \
2582 "List file attributes on an ext2 fs\n" \
2585 "\n -a Don't hide entries starting with ." \
2586 "\n -d List directory entries instead of contents" \
2587 "\n -l List long flag names" \
2588 "\n -v List the file's version/generation number" \
2590 #define lsmod_trivial_usage \
2592 #define lsmod_full_usage "\n\n" \
2593 "List the currently loaded kernel modules"
2595 #define lspci_trivial_usage \
2597 #define lspci_full_usage "\n\n" \
2598 "List all PCI devices" \
2600 "\n -m Parseable output" \
2601 "\n -k Show driver" \
2603 #define lsusb_trivial_usage NOUSAGE_STR
2604 #define lsusb_full_usage ""
2606 #if ENABLE_FEATURE_MAKEDEVS_LEAF
2607 #define makedevs_trivial_usage \
2608 "NAME TYPE MAJOR MINOR FIRST LAST [s]"
2609 #define makedevs_full_usage "\n\n" \
2610 "Create a range of block or character special files" \
2613 "\n b Block device" \
2614 "\n c Character device" \
2615 "\n f FIFO, MAJOR and MINOR are ignored" \
2617 "\nFIRST..LAST specify numbers appended to NAME." \
2618 "\nIf 's' is the last argument, the base device is created as well." \
2621 "\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \
2622 "\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
2623 #define makedevs_example_usage \
2624 "# makedevs /dev/ttyS c 4 66 2 63\n" \
2625 "[creates ttyS2-ttyS63]\n" \
2626 "# makedevs /dev/hda b 3 0 0 8 s\n" \
2627 "[creates hda,hda1-hda8]\n"
2630 #if ENABLE_FEATURE_MAKEDEVS_TABLE
2631 #define makedevs_trivial_usage \
2632 "[-d device_table] rootdir"
2633 #define makedevs_full_usage "\n\n" \
2634 "Create a range of special files as specified in a device table.\n" \
2635 "Device table entries take the form of:\n" \
2636 "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
2637 "Where name is the file name, type can be one of:\n" \
2638 " f Regular file\n" \
2640 " c Character device\n" \
2641 " b Block device\n" \
2642 " p Fifo (named pipe)\n" \
2643 "uid is the user id for the target file, gid is the group id for the\n" \
2644 "target file. The rest of the entries (major, minor, etc) apply to\n" \
2645 "to device special files. A '-' may be used for blank entries."
2646 #define makedevs_example_usage \
2648 "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
2649 "/dev d 755 0 0 - - - - -\n" \
2650 "/dev/console c 666 0 0 5 1 - - -\n" \
2651 "/dev/null c 666 0 0 1 3 0 0 -\n" \
2652 "/dev/zero c 666 0 0 1 5 0 0 -\n" \
2653 "/dev/hda b 640 0 0 3 0 0 0 -\n" \
2654 "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
2664 #define makemime_trivial_usage \
2665 "[OPTIONS] [FILE]..."
2666 #define makemime_full_usage "\n\n" \
2667 "Create multipart MIME-encoded message from FILEs\n" \
2668 /* "Transfer encoding is base64, disposition is inline (not attachment)\n" */ \
2670 "\n -o FILE Output. Default: stdout" \
2671 "\n -a HDR Add header. Examples:" \
2672 "\n \"From: user@host.org\", \"Date: `date -R`\"" \
2673 "\n -c CT Content type. Default: text/plain" \
2674 "\n -C CS Charset. Default: " CONFIG_FEATURE_MIME_CHARSET \
2675 /* "\n -e ENC Transfer encoding. Ignored. base64 is assumed" */ \
2677 "\nOther options are silently ignored" \
2679 #define man_trivial_usage \
2680 "[OPTIONS] [MANPAGE]..."
2681 #define man_full_usage "\n\n" \
2682 "Format and display manual page\n" \
2684 "\n -a Display all pages" \
2685 "\n -w Show page locations" \
2687 #define matchpathcon_trivial_usage \
2688 "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
2689 #define matchpathcon_full_usage "\n\n" \
2690 " -n Don't display path" \
2691 "\n -N Don't use translations" \
2692 "\n -f Use alternate file_context file" \
2693 "\n -p Use prefix to speed translations" \
2694 "\n -V Verify file context on disk matches defaults" \
2696 #define md5sum_trivial_usage \
2697 "[OPTIONS] [FILE]..." \
2698 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTIONS] -c [FILE]")
2699 #define md5sum_full_usage "\n\n" \
2700 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
2701 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2703 "\n -c Check sums against given list" \
2704 "\n -s Don't output anything, status code shows success" \
2705 "\n -w Warn about improperly formatted checksum lines" \
2708 #define md5sum_example_usage \
2709 "$ md5sum < busybox\n" \
2710 "6fd11e98b98a58f64ff3398d7b324003\n" \
2711 "$ md5sum busybox\n" \
2712 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
2714 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
2718 #define sha1sum_trivial_usage \
2719 "[OPTIONS] [FILE]..." \
2720 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTIONS] -c [FILE]")
2721 #define sha1sum_full_usage "\n\n" \
2722 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums" \
2723 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2725 "\n -c Check sums against given list" \
2726 "\n -s Don't output anything, status code shows success" \
2727 "\n -w Warn about improperly formatted checksum lines" \
2730 #define sha256sum_trivial_usage \
2731 "[OPTIONS] [FILE]..." \
2732 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha256sum [OPTIONS] -c [FILE]")
2733 #define sha256sum_full_usage "\n\n" \
2734 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA256 checksums" \
2735 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2737 "\n -c Check sums against given list" \
2738 "\n -s Don't output anything, status code shows success" \
2739 "\n -w Warn about improperly formatted checksum lines" \
2742 #define sha512sum_trivial_usage \
2743 "[OPTIONS] [FILE]..." \
2744 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha512sum [OPTIONS] -c [FILE]")
2745 #define sha512sum_full_usage "\n\n" \
2746 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA512 checksums" \
2747 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2749 "\n -c Check sums against given list" \
2750 "\n -s Don't output anything, status code shows success" \
2751 "\n -w Warn about improperly formatted checksum lines" \
2754 #define mdev_trivial_usage \
2756 #define mdev_full_usage "\n\n" \
2757 " -s Scan /sys and populate /dev during system boot\n" \
2759 "It can be run by kernel as a hotplug helper. To activate it:\n" \
2760 " echo /sbin/mdev > /proc/sys/kernel/hotplug\n" \
2761 IF_FEATURE_MDEV_CONF( \
2762 "It uses /etc/mdev.conf with lines\n" \
2763 "[-]DEVNAME UID:GID PERM" \
2764 IF_FEATURE_MDEV_RENAME(" [>|=PATH]") \
2765 IF_FEATURE_MDEV_EXEC(" [@|$|*PROG]") \
2768 #define mdev_notes_usage "" \
2769 IF_FEATURE_MDEV_CONFIG( \
2770 "The mdev config file contains lines that look like:\n" \
2771 " hd[a-z][0-9]* 0:3 660\n\n" \
2772 "That's device name (with regex match), uid:gid, and permissions.\n\n" \
2773 IF_FEATURE_MDEV_EXEC( \
2774 "Optionally, that can be followed (on the same line) by a special character\n" \
2775 "and a command line to run after creating/before deleting the corresponding\n" \
2776 "device(s). The environment variable $MDEV indicates the active device node\n" \
2777 "(which is useful if it's a regex match). For example:\n\n" \
2778 " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
2779 "The special characters are @ (run after creating), $ (run before deleting),\n" \
2780 "and * (run both after creating and before deleting). The commands run in\n" \
2781 "the /dev directory, and use system() which calls /bin/sh.\n\n" \
2783 "Config file parsing stops on the first matching line. If no config\n" \
2784 "entry is matched, devices are created with default 0:0 660. (Make\n" \
2785 "the last line match .* to override this.)\n\n" \
2788 #define mesg_trivial_usage \
2790 #define mesg_full_usage "\n\n" \
2791 "Control write access to your terminal\n" \
2792 " y Allow write access to your terminal\n" \
2793 " n Disallow write access to your terminal"
2795 #define microcom_trivial_usage \
2796 "[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY"
2797 #define microcom_full_usage "\n\n" \
2798 "Copy bytes for stdin to TTY and from TTY to stdout\n" \
2800 "\n -d Wait up to DELAY ms for TTY output before sending every" \
2801 "\n next byte to it" \
2802 "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \
2803 "\n -s Set serial line to SPEED" \
2804 "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \
2806 #define mkdir_trivial_usage \
2807 "[OPTIONS] DIRECTORY..."
2808 #define mkdir_full_usage "\n\n" \
2809 "Create DIRECTORY\n" \
2812 "\n -p No error if exists; make parent directories as needed" \
2814 "\n -Z Set security context" \
2817 #define mkdir_example_usage \
2818 "$ mkdir /tmp/foo\n" \
2819 "$ mkdir /tmp/foo\n" \
2820 "/tmp/foo: File exists\n" \
2821 "$ mkdir /tmp/foo/bar/baz\n" \
2822 "/tmp/foo/bar/baz: No such file or directory\n" \
2823 "$ mkdir -p /tmp/foo/bar/baz\n"
2825 #define mkfifo_trivial_usage \
2827 #define mkfifo_full_usage "\n\n" \
2828 "Create named pipe (identical to 'mknod name p')\n" \
2830 "\n -m MODE Mode (default a=rw)" \
2832 "\n -Z Set security context" \
2835 #define mkfs_ext2_trivial_usage \
2837 /* "[-c|-l filename] " */ \
2839 /* "[-f fragment-size] [-g blocks-per-group] " */ \
2840 "[-i INODE_RATIO] [-I INODE_SIZE] " \
2841 /* "[-j] [-J journal-options] [-N number-of-inodes] " */ \
2842 "[-m RESERVED_PERCENT] " \
2843 /* "[-o creator-os] [-O feature[,...]] [-q] " */ \
2844 /* "[r fs-revision-level] [-E extended-options] [-v] [-F] " */ \
2846 /* "[-M last-mounted-directory] [-S] [-T filesystem-type] " */ \
2848 #define mkfs_ext2_full_usage "\n\n" \
2849 " -b BLK_SIZE Block size, bytes" \
2850 /* "\n -c Check device for bad blocks" */ \
2851 /* "\n -E opts Set extended options" */ \
2852 /* "\n -f size Fragment size in bytes" */ \
2854 /* "\n -g N Number of blocks in a block group" */ \
2855 "\n -i RATIO Max number of files is filesystem_size / RATIO" \
2856 "\n -I BYTES Inode size (min 128)" \
2857 /* "\n -j Create a journal (ext3)" */ \
2858 /* "\n -J opts Set journal options (size/device)" */ \
2859 /* "\n -l file Read bad blocks list from file" */ \
2860 "\n -L LBL Volume label" \
2861 "\n -m PERCENT Percent of blocks to reserve for admin" \
2862 /* "\n -M dir Set last mounted directory" */ \
2864 /* "\n -N N Number of inodes to create" */ \
2865 /* "\n -o os Set the 'creator os' field" */ \
2866 /* "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" */ \
2867 /* "\n -q Quiet" */ \
2868 /* "\n -r rev Set filesystem revision" */ \
2869 /* "\n -S Write superblock and group descriptors only" */ \
2870 /* "\n -T fs-type Set usage type (news/largefile/largefile4)" */ \
2871 /* "\n -v Verbose" */ \
2873 #define mkfs_minix_trivial_usage \
2874 "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]"
2875 #define mkfs_minix_full_usage "\n\n" \
2876 "Make a MINIX filesystem\n" \
2878 "\n -c Check device for bad blocks" \
2879 "\n -n [14|30] Maximum length of filenames" \
2880 "\n -i INODES Number of inodes for the filesystem" \
2881 "\n -l FILE Read bad blocks list from FILE" \
2882 "\n -v Make version 2 filesystem" \
2884 #define mkfs_reiser_trivial_usage \
2885 "[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]"
2887 #define mkfs_reiser_full_usage "\n\n" \
2888 "Make a ReiserFS V3 filesystem\n" \
2891 "\n -l LBL Volume label" \
2893 #define mkfs_vfat_trivial_usage \
2894 "[-v] [-n LABEL] BLOCKDEV [KBYTES]"
2895 /* Accepted but ignored:
2896 "[-c] [-C] [-I] [-l bad-block-file] [-b backup-boot-sector] "
2897 "[-m boot-msg-file] [-i volume-id] "
2898 "[-s sectors-per-cluster] [-S logical-sector-size] [-f number-of-FATs] "
2899 "[-h hidden-sectors] [-F fat-size] [-r root-dir-entries] [-R reserved-sectors] "
2901 #define mkfs_vfat_full_usage "\n\n" \
2902 "Make a FAT32 filesystem\n" \
2904 /* "\n -c Check device for bad blocks" */ \
2906 /* "\n -I Allow to use entire disk device (e.g. /dev/hda)" */ \
2907 "\n -n LBL Volume label" \
2909 #define mknod_trivial_usage \
2910 "[OPTIONS] NAME TYPE MAJOR MINOR"
2911 #define mknod_full_usage "\n\n" \
2912 "Create a special file (block, character, or pipe)\n" \
2914 "\n -m Create the special file using the specified mode (default a=rw)" \
2915 "\nTYPEs include:" \
2916 "\n b: Make a block device" \
2917 "\n c or u: Make a character device" \
2918 "\n p: Make a named pipe (MAJOR and MINOR are ignored)" \
2920 "\n -Z Set security context" \
2923 #define mknod_example_usage \
2924 "$ mknod /dev/fd0 b 2 0\n" \
2925 "$ mknod -m 644 /tmp/pipe p\n"
2927 #define mkswap_trivial_usage \
2928 "[OPTIONS] BLOCKDEV [KBYTES]"
2929 #define mkswap_full_usage "\n\n" \
2930 "Prepare BLOCKDEV to be used as swap partition\n" \
2934 #define mktemp_trivial_usage \
2935 "[-dt] [-p DIR] [TEMPLATE]"
2936 #define mktemp_full_usage "\n\n" \
2937 "Create a temporary file with name based on TEMPLATE and print its name.\n" \
2938 "TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" \
2940 "\n -d Make a directory instead of a file" \
2941 /* "\n -q Fail silently if an error occurs" - we ignore it */ \
2942 "\n -t Generate a path rooted in temporary directory" \
2943 "\n -p DIR Use DIR as a temporary directory (implies -t)" \
2945 "\nFor -t or -p, directory is chosen as follows:" \
2946 "\n$TMPDIR if set, else -p DIR, else /tmp" \
2948 #define mktemp_example_usage \
2949 "$ mktemp /tmp/temp.XXXXXX\n" \
2950 "/tmp/temp.mWiLjM\n" \
2951 "$ ls -la /tmp/temp.mWiLjM\n" \
2952 "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
2954 #define more_trivial_usage \
2956 #define more_full_usage "\n\n" \
2957 "View FILE (or stdin) one screenful at a time"
2959 #define more_example_usage \
2962 #define mount_trivial_usage \
2963 "[OPTIONS] [-o OPTS] DEVICE NODE"
2964 #define mount_full_usage "\n\n" \
2965 "Mount a filesystem. Filesystem autodetection requires /proc.\n" \
2967 "\n -a Mount all filesystems in fstab" \
2968 IF_FEATURE_MOUNT_FAKE( \
2969 IF_FEATURE_MTAB_SUPPORT( \
2970 "\n -f Update /etc/mtab, but don't mount" \
2972 IF_NOT_FEATURE_MTAB_SUPPORT( \
2976 IF_FEATURE_MOUNT_HELPERS( \
2977 "\n -i Don't run mount helper" \
2979 IF_FEATURE_MTAB_SUPPORT( \
2980 "\n -n Don't update /etc/mtab" \
2982 "\n -r Read-only mount" \
2983 "\n -w Read-write mount (default)" \
2984 "\n -t FSTYPE Filesystem type" \
2985 "\n -O OPT Mount only filesystems with option OPT (-a only)" \
2987 IF_FEATURE_MOUNT_LOOP( \
2988 "\n loop Ignored (loop devices are autodetected)" \
2990 IF_FEATURE_MOUNT_FLAGS( \
2991 "\n [a]sync Writes are [a]synchronous" \
2992 "\n [no]atime Disable/enable updates to inode access times" \
2993 "\n [no]diratime Disable/enable atime updates to directories" \
2994 "\n [no]relatime Disable/enable atime updates relative to modification time" \
2995 "\n [no]dev (Dis)allow use of special device files" \
2996 "\n [no]exec (Dis)allow use of executable files" \
2997 "\n [no]suid (Dis)allow set-user-id-root programs" \
2998 "\n [r]shared Convert [recursively] to a shared subtree" \
2999 "\n [r]slave Convert [recursively] to a slave subtree" \
3000 "\n [r]private Convert [recursively] to a private subtree" \
3001 "\n [un]bindable Make mount point [un]able to be bind mounted" \
3002 "\n bind Bind a file or directory to another location" \
3003 "\n move Relocate an existing mount point" \
3005 "\n remount Remount a mounted filesystem, changing flags" \
3006 "\n ro/rw Same as -r/-w" \
3008 "\nThere are filesystem-specific -o flags." \
3010 #define mount_example_usage \
3012 "/dev/hda3 on / type minix (rw)\n" \
3013 "proc on /proc type proc (rw)\n" \
3014 "devpts on /dev/pts type devpts (rw)\n" \
3015 "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
3016 "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
3017 "$ mount cd_image.iso mydir\n"
3018 #define mount_notes_usage \
3019 "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
3021 #define mountpoint_trivial_usage \
3022 "[-q] <[-dn] DIR | -x DEVICE>"
3023 #define mountpoint_full_usage "\n\n" \
3024 "Check if the directory is a mountpoint\n" \
3027 "\n -d Print major/minor device number of the filesystem" \
3028 "\n -n Print device name of the filesystem" \
3029 "\n -x Print major/minor device number of the blockdevice" \
3031 #define mountpoint_example_usage \
3032 "$ mountpoint /proc\n" \
3033 "/proc is not a mountpoint\n" \
3034 "$ mountpoint /sys\n" \
3035 "/sys is a mountpoint\n"
3037 #define mt_trivial_usage \
3038 "[-f device] opcode value"
3039 #define mt_full_usage "\n\n" \
3040 "Control magnetic tape drive operation\n" \
3042 "Available Opcodes:\n" \
3044 "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
3045 "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
3046 "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
3047 "setpart tell unload unlock weof wset" \
3049 #define mv_trivial_usage \
3050 "[OPTIONS] SOURCE DEST\n" \
3051 "or: mv [OPTIONS] SOURCE... DIRECTORY"
3052 #define mv_full_usage "\n\n" \
3053 "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY\n" \
3055 "\n -f Don't prompt before overwriting" \
3056 "\n -i Interactive, prompt before overwrite" \
3058 #define mv_example_usage \
3059 "$ mv /tmp/foo /bin/bar\n"
3061 #define nameif_trivial_usage \
3062 "[-s] [-c FILE] [{IFNAME MACADDR}]"
3063 #define nameif_full_usage "\n\n" \
3064 "Rename network interface while it in the down state\n" \
3066 "\n -c FILE Use configuration file (default: /etc/mactab)" \
3067 "\n -s Use syslog (LOCAL0 facility)" \
3068 "\n IFNAME MACADDR new_interface_name interface_mac_address" \
3070 #define nameif_example_usage \
3071 "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
3073 "$ nameif -c /etc/my_mactab_file\n" \
3077 #if ENABLE_NC_SERVER || ENABLE_NC_EXTRA
3078 #define NC_OPTIONS_STR "\n\nOptions:"
3080 #define NC_OPTIONS_STR
3083 #define nc_trivial_usage \
3084 IF_NC_EXTRA("[-iN] [-wN] ")IF_NC_SERVER("[-l] [-p PORT] ") \
3085 "["IF_NC_EXTRA("-f FILENAME|")"IPADDR PORT]"IF_NC_EXTRA(" [-e PROG]")
3086 #define nc_full_usage "\n\n" \
3087 "Open a pipe to IP:port" IF_NC_EXTRA(" or file") \
3090 "\n -e PROG Run PROG after connect" \
3091 "\n -i SEC Delay interval for lines sent" \
3092 "\n -w SEC Timeout for connect" \
3093 "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \
3096 "\n -l Listen mode, for inbound connects" \
3098 "\n (use -l twice with -e for persistent server)") \
3099 "\n -p PORT Local port" \
3102 #define nc_notes_usage "" \
3104 "To use netcat as a terminal emulator on a serial port:\n\n" \
3105 "$ stty 115200 -F /dev/ttyS0\n" \
3106 "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
3109 #define nc_example_usage \
3110 "$ nc foobar.somedomain.com 25\n" \
3111 "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
3113 "214-Commands supported:\n" \
3114 "214- HELO EHLO MAIL RCPT DATA AUTH\n" \
3115 "214 NOOP QUIT RSET HELP\n" \
3117 "221 foobar closing connection\n"
3119 #else /* DESKTOP nc - much more compatible with nc 1.10 */
3121 #define nc_trivial_usage \
3122 "[OPTIONS] HOST PORT - connect" \
3124 "nc [OPTIONS] -l -p PORT [HOST] [PORT] - listen")
3125 #define nc_full_usage "\n\n" \
3127 "\n -e PROG Run PROG after connect (must be last)" \
3129 "\n -l Listen mode, for inbound connects" \
3131 "\n -n Don't do DNS resolution" \
3132 "\n -s ADDR Local address" \
3133 "\n -p PORT Local port" \
3136 "\n -w SEC Timeout for connects and final net reads" \
3138 "\n -i SEC Delay interval for lines sent" /* ", ports scanned" */ \
3139 "\n -o FILE Hex dump traffic" \
3140 "\n -z Zero-I/O mode (scanning)" \
3142 /* "\n -r Randomize local and remote ports" */
3143 /* "\n -g gateway Source-routing hop point[s], up to 8" */
3144 /* "\n -G num Source-routing pointer: 4, 8, 12, ..." */
3145 /* "\nport numbers can be individual or ranges: lo-hi [inclusive]" */
3147 /* -e PROG can take ARGS too: "nc ... -e ls -l", but we don't document it
3148 * in help text: nc 1.10 does not allow that. We don't want to entice
3149 * users to use this incompatibility */
3153 #define netstat_trivial_usage \
3154 "[-laentuwxr"IF_FEATURE_NETSTAT_WIDE("W")IF_FEATURE_NETSTAT_PRG("p")"]"
3155 #define netstat_full_usage "\n\n" \
3156 "Display networking information\n" \
3158 "\n -l Display listening server sockets" \
3159 "\n -a Display all sockets (default: connected)" \
3160 "\n -e Display other/more information" \
3161 "\n -n Don't resolve names" \
3162 "\n -t Tcp sockets" \
3163 "\n -u Udp sockets" \
3164 "\n -w Raw sockets" \
3165 "\n -x Unix sockets" \
3166 "\n -r Display routing table" \
3167 IF_FEATURE_NETSTAT_WIDE( \
3168 "\n -W Display with no column truncation" \
3170 IF_FEATURE_NETSTAT_PRG( \
3171 "\n -p Display PID/Program name for sockets" \
3174 #define nice_trivial_usage \
3175 "[-n ADJUST] [PROG ARGS]"
3176 #define nice_full_usage "\n\n" \
3177 "Run PROG with modified scheduling priority\n" \
3179 "\n -n ADJUST Adjust priority by ADJUST" \
3181 #define nmeter_trivial_usage \
3183 #define nmeter_full_usage "\n\n" \
3184 "Monitor system in real time\n\n" \
3185 "Format specifiers:\n" \
3186 " %Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \
3187 " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \
3188 " %[niface] Monitor network interface 'iface'\n" \
3189 " %m Monitor allocated memory\n" \
3190 " %[mf] Monitor free memory\n" \
3191 " %[mt] Monitor total memory\n" \
3192 " %s Monitor allocated swap\n" \
3193 " %f Monitor number of used file descriptors\n" \
3194 " %Ni Monitor total/specific IRQ rate\n" \
3195 " %x Monitor context switch rate\n" \
3196 " %p Monitor forks\n" \
3197 " %[pn] Monitor # of processes\n" \
3198 " %b Monitor block io\n" \
3199 " %Nt Show time (with N decimal points)\n" \
3200 " %Nd Milliseconds between updates (default:1000)\n" \
3201 " %r Print <cr> instead of <lf> at EOL" \
3203 #define nmeter_example_usage \
3204 "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
3206 #define nohup_trivial_usage \
3208 #define nohup_full_usage "\n\n" \
3209 "Run PROG immune to hangups, with output to a non-tty"
3210 #define nohup_example_usage \
3213 #define nslookup_trivial_usage \
3215 #define nslookup_full_usage "\n\n" \
3216 "Query the nameserver for the IP address of the given HOST\n" \
3217 "optionally using a specified DNS server"
3218 #define nslookup_example_usage \
3219 "$ nslookup localhost\n" \
3220 "Server: default\n" \
3221 "Address: default\n" \
3224 "Address: 127.0.0.1\n"
3226 #define ntpd_trivial_usage \
3227 "[-dnqwl] [-S PROG] [-p PEER]..."
3228 #define ntpd_full_usage "\n\n" \
3229 "NTP client/server\n" \
3232 "\n -n Do not daemonize" \
3233 "\n -q Quit after clock is set" \
3234 /* -N exists for mostly compat reasons, thus not essential to inform */ \
3235 /* the user that it exists: user may use nice as well */ \
3236 /* "\n -N Run at high priority" */ \
3237 "\n -w Do not set time (only query peers), implies -n" \
3238 "\n -l Run as server on port 123" \
3239 "\n -S PROG Run PROG after stepping time, stratum change, and every 11 mins" \
3240 "\n -p PEER Obtain time from PEER (may be repeated)" \
3242 #define od_trivial_usage \
3243 "[-aBbcDdeFfHhIiLlOovXx] " IF_DESKTOP("[-t TYPE] ") "[FILE]"
3244 #define od_full_usage "\n\n" \
3245 "Write an unambiguous representation, octal bytes by default, of FILE\n" \
3246 "(or stdin) to stdout"
3248 #define openvt_trivial_usage \
3249 "[-c N] [-sw] [PROG ARGS]"
3250 #define openvt_full_usage "\n\n" \
3251 "Start PROG on a new virtual terminal\n" \
3253 "\n -c N Use specified VT" \
3254 "\n -s Switch to the VT" \
3255 /* "\n -l Run PROG as login shell (by prepending '-')" */ \
3256 "\n -w Wait for PROG to exit" \
3258 #define openvt_example_usage \
3259 "openvt 2 /bin/ash\n"
3262 #define parse_trivial_usage \
3263 "[-n MAXTOKENS] [-m MINTOKENS] [-d DELIMS] [-f FLAGS] FILE..."
3264 #define parse_full_usage ""
3267 #define passwd_trivial_usage \
3269 #define passwd_full_usage "\n\n" \
3270 "Change USER's password. If no USER is specified,\n" \
3271 "changes the password for the current user.\n" \
3273 "\n -a Algorithm to use for password (des, md5)" /* ", sha1)" */ \
3274 "\n -d Delete password for the account" \
3275 "\n -l Lock (disable) account" \
3276 "\n -u Unlock (re-enable) account" \
3278 #define chpasswd_trivial_usage \
3279 IF_LONG_OPTS("[--md5|--encrypted]") IF_NOT_LONG_OPTS("[-m|-e]")
3280 #define chpasswd_full_usage "\n\n" \
3281 "Read user:password from stdin and update /etc/passwd\n" \
3284 "\n -e,--encrypted Supplied passwords are in encrypted form" \
3285 "\n -m,--md5 Use MD5 encryption instead of DES" \
3288 "\n -e Supplied passwords are in encrypted form" \
3289 "\n -m Use MD5 encryption instead of DES" \
3292 #define patch_trivial_usage \
3293 "[OPTIONS] [ORIGFILE [PATCHFILE]]"
3294 #define patch_full_usage "\n\n" \
3296 " -p,--strip N Strip N leading components from file names" \
3297 "\n -i,--input DIFF Read DIFF instead of stdin" \
3298 "\n -R,--reverse Reverse patch" \
3299 "\n -N,--forward Ignore already applied patches" \
3300 "\n --dry-run Don't actually change files" \
3303 " -p N Strip N leading components from file names" \
3304 "\n -i DIFF Read DIFF instead of stdin" \
3305 "\n -R Reverse patch" \
3306 "\n -N Ignore already applied patches" \
3309 #define patch_example_usage \
3310 "$ patch -p1 < example.diff\n" \
3311 "$ patch -p0 -i example.diff"
3313 #define pgrep_trivial_usage \
3314 "[-flnovx] [-s SID|-P PPID|PATTERN]"
3315 #define pgrep_full_usage "\n\n" \
3316 "Display process(es) selected by regex PATTERN\n" \
3318 "\n -l Show command name too" \
3319 "\n -f Match against entire command line" \
3320 "\n -n Show the newest process only" \
3321 "\n -o Show the oldest process only" \
3322 "\n -v Negate the match" \
3323 "\n -x Match whole name (not substring)" \
3324 "\n -s Match session ID (0 for current)" \
3325 "\n -P Match parent process ID" \
3327 #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
3328 #define pidof_trivial_usage \
3329 "[OPTIONS] [NAME]..."
3330 #define USAGE_PIDOF "\n\nOptions:"
3332 #define pidof_trivial_usage \
3334 #define USAGE_PIDOF /* none */
3336 #define pidof_full_usage "\n\n" \
3337 "List PIDs of all processes with names that match NAMEs" \
3339 IF_FEATURE_PIDOF_SINGLE( \
3340 "\n -s Show only one PID") \
3341 IF_FEATURE_PIDOF_OMIT( \
3342 "\n -o PID Omit given pid" \
3343 "\n Use %PPID to omit pid of pidof's parent") \
3345 #define pidof_example_usage \
3348 IF_FEATURE_PIDOF_OMIT( \
3349 "$ pidof /bin/sh\n20351 5973 5950\n") \
3350 IF_FEATURE_PIDOF_OMIT( \
3351 "$ pidof /bin/sh -o %PPID\n20351 5950")
3353 #if !ENABLE_FEATURE_FANCY_PING
3354 #define ping_trivial_usage \
3356 #define ping_full_usage "\n\n" \
3357 "Send ICMP ECHO_REQUEST packets to network hosts"
3358 #define ping6_trivial_usage \
3360 #define ping6_full_usage "\n\n" \
3361 "Send ICMP ECHO_REQUEST packets to network hosts"
3363 #define ping_trivial_usage \
3365 #define ping_full_usage "\n\n" \
3366 "Send ICMP ECHO_REQUEST packets to network hosts\n" \
3368 "\n -4, -6 Force IP or IPv6 name resolution" \
3369 "\n -c CNT Send only CNT pings" \
3370 "\n -s SIZE Send SIZE data bytes in packets (default:56)" \
3371 "\n -I IFACE/IP Use interface or IP address as source" \
3372 "\n -W SEC Seconds to wait for the first response (default:10)" \
3373 "\n (after all -c CNT packets are sent)" \
3374 "\n -w SEC Seconds until ping exits (default:infinite)" \
3375 "\n (can exit earlier with -c CNT)" \
3376 "\n -q Quiet, only displays output at start" \
3377 "\n and when finished" \
3379 #define ping6_trivial_usage \
3381 #define ping6_full_usage "\n\n" \
3382 "Send ICMP ECHO_REQUEST packets to network hosts\n" \
3384 "\n -c CNT Send only CNT pings" \
3385 "\n -s SIZE Send SIZE data bytes in packets (default:56)" \
3386 "\n -I IFACE/IP Use interface or IP address as source" \
3387 "\n -q Quiet, only displays output at start" \
3388 "\n and when finished" \
3391 #define ping_example_usage \
3392 "$ ping localhost\n" \
3393 "PING slag (127.0.0.1): 56 data bytes\n" \
3394 "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
3396 "--- debian ping statistics ---\n" \
3397 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
3398 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
3399 #define ping6_example_usage \
3400 "$ ping6 ip6-localhost\n" \
3401 "PING ip6-localhost (::1): 56 data bytes\n" \
3402 "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
3404 "--- ip6-localhost ping statistics ---\n" \
3405 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
3406 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
3408 #define pipe_progress_trivial_usage NOUSAGE_STR
3409 #define pipe_progress_full_usage ""
3411 #define pivot_root_trivial_usage \
3413 #define pivot_root_full_usage "\n\n" \
3414 "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
3415 "the new root file system"
3417 #define pkill_trivial_usage \
3418 "[-l|-SIGNAL] [-fnovx] [-s SID|-P PPID|PATTERN]"
3419 #define pkill_full_usage "\n\n" \
3420 "Send a signal to process(es) selected by regex PATTERN\n" \
3422 "\n -l List all signals" \
3423 "\n -f Match against entire command line" \
3424 "\n -n Signal the newest process only" \
3425 "\n -o Signal the oldest process only" \
3426 "\n -v Negate the match" \
3427 "\n -x Match whole name (not substring)" \
3428 "\n -s Match session ID (0 for current)" \
3429 "\n -P Match parent process ID" \
3431 #define popmaildir_trivial_usage \
3432 "[OPTIONS] MAILDIR [CONN_HELPER ARGS]"
3433 #define popmaildir_full_usage "\n\n" \
3434 "Fetch content of remote mailbox to local maildir\n" \
3436 /* "\n -b Binary mode. Ignored" */ \
3437 /* "\n -d Debug. Ignored" */ \
3438 /* "\n -m Show used memory. Ignored" */ \
3439 /* "\n -V Show version. Ignored" */ \
3440 /* "\n -c Use tcpclient. Ignored" */ \
3441 /* "\n -a Use APOP protocol. Implied. If server supports APOP -> use it" */ \
3442 "\n -s Skip authorization" \
3443 "\n -T Get messages with TOP instead of RETR" \
3444 "\n -k Keep retrieved messages on the server" \
3445 "\n -t SEC Network timeout" \
3446 IF_FEATURE_POPMAILDIR_DELIVERY( \
3447 "\n -F \"PROG ARGS\" Filter program (may be repeated)" \
3448 "\n -M \"PROG ARGS\" Delivery program" \
3451 "\nFetch from plain POP3 server:" \
3452 "\npopmaildir -k DIR nc pop3.server.com 110 <user_and_pass.txt" \
3453 "\nFetch from SSLed POP3 server and delete fetched emails:" \
3454 "\npopmaildir DIR -- openssl s_client -quiet -connect pop3.server.com:995 <user_and_pass.txt"
3455 /* "\n -R BYTES Remove old messages on the server >= BYTES. Ignored" */
3456 /* "\n -Z N1-N2 Remove messages from N1 to N2 (dangerous). Ignored" */
3457 /* "\n -L BYTES Don't retrieve new messages >= BYTES. Ignored" */
3458 /* "\n -H LINES Type first LINES of a message. Ignored" */
3459 #define popmaildir_example_usage \
3460 "$ popmaildir -k ~/Maildir -- nc pop.drvv.ru 110 [<password_file]\n" \
3461 "$ popmaildir ~/Maildir -- openssl s_client -quiet -connect pop.gmail.com:995 [<password_file]\n"
3463 #define poweroff_trivial_usage \
3464 "[-d DELAY] [-n] [-f]"
3465 #define poweroff_full_usage "\n\n" \
3466 "Halt and shut off power\n" \
3468 "\n -d Delay interval for halting" \
3469 "\n -n Do not sync" \
3470 "\n -f Force power off (don't go through init)" \
3472 #define printenv_trivial_usage \
3474 #define printenv_full_usage "\n\n" \
3475 "Print environment VARIABLEs.\n" \
3476 "If no VARIABLE specified, print all."
3478 #define printf_trivial_usage \
3479 "FORMAT [ARGUMENT]..."
3480 #define printf_full_usage "\n\n" \
3481 "Format and print ARGUMENT(s) according to FORMAT,\n" \
3482 "where FORMAT controls the output exactly as in C printf"
3483 #define printf_example_usage \
3484 "$ printf \"Val=%d\\n\" 5\n" \
3490 #define ps_trivial_usage \
3491 "[-o COL1,COL2=HEADER]" IF_FEATURE_SHOW_THREADS(" [-T]")
3492 #define ps_full_usage "\n\n" \
3493 "Show list of processes\n" \
3495 "\n -o COL1,COL2=HEADER Select columns for display" \
3496 IF_FEATURE_SHOW_THREADS( \
3497 "\n -T Show threads" \
3500 #else /* !ENABLE_DESKTOP */
3502 #if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE
3503 #define USAGE_PS "\nThis version of ps accepts no options"
3505 #define USAGE_PS "\nOptions:"
3508 #define ps_trivial_usage \
3510 #define ps_full_usage "\n\n" \
3511 "Show list of processes\n" \
3514 "\n -Z Show selinux context" \
3516 IF_FEATURE_PS_WIDE( \
3517 "\n w Wide output" \
3520 #endif /* ENABLE_DESKTOP */
3522 #define ps_example_usage \
3524 " PID Uid Gid State Command\n" \
3525 " 1 root root S init\n" \
3526 " 2 root root S [kflushd]\n" \
3527 " 3 root root S [kupdate]\n" \
3528 " 4 root root S [kpiod]\n" \
3529 " 5 root root S [kswapd]\n" \
3530 " 742 andersen andersen S [bash]\n" \
3531 " 743 andersen andersen S -bash\n" \
3532 " 745 root root S [getty]\n" \
3533 " 2990 andersen andersen R ps\n" \
3535 #define pscan_trivial_usage \
3536 "[-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST"
3537 #define pscan_full_usage "\n\n" \
3538 "Scan a host, print all open ports\n" \
3540 "\n -c Show closed ports too" \
3541 "\n -b Show blocked ports too" \
3542 "\n -p Scan from this port (default 1)" \
3543 "\n -P Scan up to this port (default 1024)" \
3544 "\n -t Timeout (default 5000 ms)" \
3545 "\n -T Minimum rtt (default 5 ms, increase for congested hosts)" \
3547 #define pwd_trivial_usage \
3549 #define pwd_full_usage "\n\n" \
3550 "Print the full filename of the current working directory"
3551 #define pwd_example_usage \
3555 #define raidautorun_trivial_usage \
3557 #define raidautorun_full_usage "\n\n" \
3558 "Tell the kernel to automatically search and start RAID arrays"
3559 #define raidautorun_example_usage \
3560 "$ raidautorun /dev/md0"
3562 #define rdate_trivial_usage \
3564 #define rdate_full_usage "\n\n" \
3565 "Get and possibly set the system date and time from a remote HOST\n" \
3567 "\n -s Set the system date and time (default)" \
3568 "\n -p Print the date and time" \
3570 #define rdev_trivial_usage \
3572 #define rdev_full_usage "\n\n" \
3573 "Print the device node associated with the filesystem mounted at '/'"
3574 #define rdev_example_usage \
3576 "/dev/mtdblock9 /\n"
3578 #define readahead_trivial_usage \
3580 #define readahead_full_usage "\n\n" \
3581 "Preload FILEs to RAM"
3583 #define readlink_trivial_usage \
3584 IF_FEATURE_READLINK_FOLLOW("[-fnv] ") "FILE"
3585 #define readlink_full_usage "\n\n" \
3586 "Display the value of a symlink" \
3587 IF_FEATURE_READLINK_FOLLOW( "\n" \
3589 "\n -f Canonicalize by following all symlinks" \
3590 "\n -n Don't add newline" \
3594 #define readprofile_trivial_usage \
3596 #define readprofile_full_usage "\n\n" \
3598 "\n -m mapfile (Default: /boot/System.map)" \
3599 "\n -p profile (Default: /proc/profile)" \
3600 "\n -M NUM Set the profiling multiplier to NUM" \
3601 "\n -i Print only info about the sampling step" \
3603 "\n -a Print all symbols, even if count is 0" \
3604 "\n -b Print individual histogram-bin counts" \
3605 "\n -s Print individual counters within functions" \
3606 "\n -r Reset all the counters (root only)" \
3607 "\n -n Disable byte order auto-detection" \
3609 #define realpath_trivial_usage \
3611 #define realpath_full_usage "\n\n" \
3612 "Return the absolute pathnames of given FILE"
3614 #define reboot_trivial_usage \
3615 "[-d DELAY] [-n] [-f]"
3616 #define reboot_full_usage "\n\n" \
3617 "Reboot the system\n" \
3619 "\n -d Delay interval for rebooting" \
3620 "\n -n No call to sync()" \
3621 "\n -f Force reboot (don't go through init)" \
3623 #define reformime_trivial_usage \
3624 "[OPTIONS] [FILE]..."
3625 #define reformime_full_usage "\n\n" \
3626 "Parse MIME-encoded message\n" \
3628 "\n -x PREFIX Extract content of MIME sections to files" \
3629 "\n -X PROG ARGS Filter content of MIME sections through PROG" \
3630 "\n Must be the last option" \
3632 "\nOther options are silently ignored" \
3634 #define renice_trivial_usage \
3635 "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]"
3636 #define renice_full_usage "\n\n" \
3637 "Change priority of running processes\n" \
3639 "\n -n Adjust current nice value (smaller is faster)" \
3640 "\n -p Process id(s) (default)" \
3641 "\n -g Process group id(s)" \
3642 "\n -u Process user name(s) and/or id(s)" \
3644 #define scriptreplay_trivial_usage \
3645 "timingfile [typescript [divisor]]"
3646 #define scriptreplay_full_usage "\n\n" \
3647 "Play back typescripts, using timing information"
3649 #define reset_trivial_usage \
3651 #define reset_full_usage "\n\n" \
3654 #define resize_trivial_usage \
3656 #define resize_full_usage "\n\n" \
3659 #define restorecon_trivial_usage \
3660 "[-iFnRv] [-e EXCLUDEDIR]... [-o FILE] [-f FILE]"
3661 #define restorecon_full_usage "\n\n" \
3662 "Reset security contexts of files in pathname\n" \
3663 "\n -i Ignore files that don't exist" \
3664 "\n -f FILE File with list of files to process" \
3665 "\n -e DIR Directory to exclude" \
3666 "\n -R,-r Recurse" \
3667 "\n -n Don't change any file labels" \
3668 "\n -o FILE Save list of files with incorrect context" \
3670 "\n -vv Show changed labels" \
3671 "\n -F Force reset of context to match file_context" \
3672 "\n for customizable files, or the user section," \
3673 "\n if it has changed" \
3675 #define rfkill_trivial_usage \
3676 "COMMAND [INDEX|TYPE]"
3677 #define rfkill_full_usage "\n\n" \
3678 "Enable/disable wireless devices\n" \
3680 "\n list [INDEX|TYPE] List current state" \
3681 "\n block INDEX|TYPE Disable device" \
3682 "\n unblock INDEX|TYPE Enable device" \
3684 "\n TYPE: all, wlan(wifi), bluetooth, uwb(ultrawideband)," \
3685 "\n wimax, wwan, gps, fm" \
3687 #define rm_trivial_usage \
3689 #define rm_full_usage "\n\n" \
3690 "Remove (unlink) FILEs\n" \
3692 "\n -i Always prompt before removing" \
3693 "\n -f Never prompt" \
3694 "\n -R,-r Recurse" \
3696 #define rm_example_usage \
3697 "$ rm -rf /tmp/foo\n"
3699 #define rmdir_trivial_usage \
3700 "[OPTIONS] DIRECTORY..."
3701 #define rmdir_full_usage "\n\n" \
3702 "Remove DIRECTORY if it is empty\n" \
3704 IF_FEATURE_RMDIR_LONG_OPTIONS( \
3705 "\n -p|--parents Include parents" \
3706 "\n --ignore-fail-on-non-empty" \
3708 IF_NOT_FEATURE_RMDIR_LONG_OPTIONS( \
3709 "\n -p Include parents" \
3712 #define rmdir_example_usage \
3713 "# rmdir /tmp/foo\n"
3715 #define rmmod_trivial_usage \
3716 "[OPTIONS] [MODULE]..."
3717 #define rmmod_full_usage "\n\n" \
3718 "Unload the specified kernel modules from the kernel\n" \
3720 "\n -w Wait until the module is no longer used" \
3721 "\n -f Force unloading" \
3722 "\n -a Remove all unused modules (recursively)" \
3724 #define rmmod_example_usage \
3727 #define route_trivial_usage \
3728 "[{add|del|delete}]"
3729 #define route_full_usage "\n\n" \
3730 "Edit kernel routing tables\n" \
3732 "\n -n Don't resolve names" \
3733 "\n -e Display other/more information" \
3734 "\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family" \
3736 #define rpm_trivial_usage \
3737 "-i PACKAGE.rpm; rpm -qp[ildc] PACKAGE.rpm"
3738 #define rpm_full_usage "\n\n" \
3739 "Manipulate RPM packages\n" \
3741 "\n -i Install package" \
3742 "\n -qp Query package" \
3744 "\n -i Show information" \
3745 "\n -l List contents" \
3746 "\n -d List documents" \
3747 "\n -c List config files" \
3749 #define rpm2cpio_trivial_usage \
3751 #define rpm2cpio_full_usage "\n\n" \
3752 "Output a cpio archive of the rpm file"
3754 #define rtcwake_trivial_usage \
3755 "[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]"
3756 #define rtcwake_full_usage "\n\n" \
3757 "Enter a system sleep state until specified wakeup time\n" \
3759 "\n -a,--auto Read clock mode from adjtime" \
3760 "\n -l,--local Clock is set to local time" \
3761 "\n -u,--utc Clock is set to UTC time" \
3762 "\n -d,--device=DEV Specify the RTC device" \
3763 "\n -m,--mode=MODE Set the sleep state (default: standby)" \
3764 "\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \
3765 "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \
3768 "\n -a Read clock mode from adjtime" \
3769 "\n -l Clock is set to local time" \
3770 "\n -u Clock is set to UTC time" \
3771 "\n -d DEV Specify the RTC device" \
3772 "\n -m MODE Set the sleep state (default: standby)" \
3773 "\n -s SEC Set the timeout in SEC seconds from now" \
3774 "\n -t TIME Set the timeout to TIME seconds from epoch" \
3777 #define runcon_trivial_usage \
3778 "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG ARGS\n" \
3779 "runcon CONTEXT PROG ARGS"
3780 #define runcon_full_usage "\n\n" \
3781 "Run PROG in a different security context\n" \
3782 "\n CONTEXT Complete security context\n" \
3783 IF_FEATURE_RUNCON_LONG_OPTIONS( \
3784 "\n -c,--compute Compute process transition context before modifying" \
3785 "\n -t,--type=TYPE Type (for same role as parent)" \
3786 "\n -u,--user=USER User identity" \
3787 "\n -r,--role=ROLE Role" \
3788 "\n -l,--range=RNG Levelrange" \
3790 IF_NOT_FEATURE_RUNCON_LONG_OPTIONS( \
3791 "\n -c Compute process transition context before modifying" \
3792 "\n -t TYPE Type (for same role as parent)" \
3793 "\n -u USER User identity" \
3795 "\n -l RNG Levelrange" \
3798 #define run_parts_trivial_usage \
3799 "[-t] "IF_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
3800 #define run_parts_full_usage "\n\n" \
3801 "Run a bunch of scripts in DIRECTORY\n" \
3803 "\n -t Print what would be run, but don't actually run anything" \
3804 "\n -a ARG Pass ARG as argument for every program" \
3805 "\n -u MASK Set the umask to MASK before running every program" \
3806 IF_FEATURE_RUN_PARTS_FANCY( \
3807 "\n -l Print names of all matching files even if they are not executable" \
3810 #define run_parts_example_usage \
3811 "$ run-parts -a start /etc/init.d\n" \
3812 "$ run-parts -a stop=now /etc/init.d\n\n" \
3813 "Let's assume you have a script foo/dosomething:\n" \
3815 "for i in $*; do eval $i; done; unset i\n" \
3816 "case \"$1\" in\n" \
3817 "start*) echo starting something;;\n" \
3818 "stop*) set -x; shutdown -h $stop;;\n" \
3820 "Running this yields:\n" \
3821 "$run-parts -a stop=+4m foo/\n" \
3824 #define runlevel_trivial_usage \
3826 #define runlevel_full_usage "\n\n" \
3827 "Find the current and previous system runlevel\n" \
3829 "If no utmp FILE exists or if no runlevel record can be found,\n" \
3831 #define runlevel_example_usage \
3832 "$ runlevel /var/run/utmp\n" \
3835 #define runsv_trivial_usage \
3837 #define runsv_full_usage "\n\n" \
3838 "Start and monitor a service and optionally an appendant log service"
3840 #define runsvdir_trivial_usage \
3841 "[-P] [-s SCRIPT] DIR"
3842 #define runsvdir_full_usage "\n\n" \
3843 "Start a runsv process for each subdirectory. If it exits, restart it.\n" \
3844 "\n -P Put each runsv in a new session" \
3845 "\n -s SCRIPT Run SCRIPT <signo> after signal is processed" \
3847 #define rx_trivial_usage \
3849 #define rx_full_usage "\n\n" \
3850 "Receive a file using the xmodem protocol"
3851 #define rx_example_usage \
3854 #define script_trivial_usage \
3855 "[-afq" IF_SCRIPTREPLAY("t") "] [-c PROG] [OUTFILE]"
3856 #define script_full_usage "\n\n" \
3858 "\n -a Append output" \
3859 "\n -c PROG Run PROG, not shell" \
3860 "\n -f Flush output after each write" \
3863 "\n -t Send timing to stderr" \
3866 #define sed_trivial_usage \
3867 "[-efinr] SED_CMD [FILE]..."
3868 #define sed_full_usage "\n\n" \
3870 "\n -e CMD Add CMD to sed commands to be executed" \
3871 "\n -f FILE Add FILE contents to sed commands to be executed" \
3872 "\n -i Edit files in-place (else sends result to stdout)" \
3873 "\n -n Suppress automatic printing of pattern space" \
3874 "\n -r Use extended regex syntax" \
3876 "\nIf no -e or -f, the first non-option argument is the sed command string." \
3877 "\nRemaining arguments are input files (stdin if none)."
3879 #define sed_example_usage \
3880 "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
3883 #define selinuxenabled_trivial_usage NOUSAGE_STR
3884 #define selinuxenabled_full_usage ""
3886 #define sendmail_trivial_usage \
3887 "[OPTIONS] [RECIPIENT_EMAIL]..."
3888 #define sendmail_full_usage "\n\n" \
3889 "Read email from stdin and send it\n" \
3890 "\nStandard options:" \
3891 "\n -t Read additional recipients from message body" \
3892 "\n -f sender Sender (required)" \
3893 "\n -o options Various options. -oi implied, others are ignored" \
3894 "\n -i -oi synonym. implied and ignored" \
3896 "\nBusybox specific options:" \
3897 "\n -w seconds Network timeout" \
3898 "\n -H 'PROG ARGS' Run connection helper" \
3900 "\n -H 'exec openssl s_client -quiet -tls1 -starttls smtp" \
3901 "\n -connect smtp.gmail.com:25' <email.txt" \
3902 "\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
3903 "\n -H 'exec openssl s_client -quiet -tls1" \
3904 "\n -connect smtp.gmail.com:465' <email.txt" \
3905 "\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
3906 "\n -S server[:port] Server" \
3907 "\n -au<username> Username for AUTH LOGIN" \
3908 "\n -ap<password> Password for AUTH LOGIN" \
3909 "\n -am<method> Authentication method. Ignored. LOGIN is implied" \
3911 "\nOther options are silently ignored; -oi -t is implied" \
3913 "\nUse makemime applet to create message with attachments" \
3916 #define seq_trivial_usage \
3917 "[-w] [-s SEP] [FIRST [INC]] LAST"
3918 #define seq_full_usage "\n\n" \
3919 "Print numbers from FIRST to LAST, in steps of INC.\n" \
3920 "FIRST, INC default to 1.\n" \
3922 "\n -w Pad to last with leading zeros" \
3923 "\n -s SEP String separator" \
3925 #define sestatus_trivial_usage \
3927 #define sestatus_full_usage "\n\n" \
3929 "\n -b Display current state of booleans" \
3931 #define setconsole_trivial_usage \
3932 "[-r" IF_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]"
3933 #define setconsole_full_usage "\n\n" \
3934 "Redirect system console output to DEVICE (default: /dev/tty)\n" \
3936 "\n -r Reset output to /dev/console" \
3938 #define setenforce_trivial_usage \
3939 "[Enforcing | Permissive | 1 | 0]"
3940 #define setenforce_full_usage ""
3942 #define setfiles_trivial_usage \
3943 "[-dnpqsvW] [-e DIR]... [-o FILE] [-r alt_root_path]" \
3944 IF_FEATURE_SETFILES_CHECK_OPTION( \
3945 " [-c policyfile] spec_file" \
3948 #define setfiles_full_usage "\n\n" \
3949 "Reset file contexts under pathname according to spec_file\n" \
3950 IF_FEATURE_SETFILES_CHECK_OPTION( \
3951 "\n -c FILE Check the validity of the contexts against the specified binary policy" \
3953 "\n -d Show which specification matched each file" \
3954 "\n -l Log changes in file labels to syslog" \
3955 "\n -n Don't change any file labels" \
3956 "\n -q Suppress warnings" \
3957 "\n -r DIR Use an alternate root path" \
3958 "\n -e DIR Exclude DIR" \
3959 "\n -F Force reset of context to match file_context for customizable files" \
3960 "\n -o FILE Save list of files with incorrect context" \
3961 "\n -s Take a list of files from stdin (instead of command line)" \
3962 "\n -v Show changes in file labels, if type or role are changing" \
3963 "\n -vv Show changes in file labels, if type, role, or user are changing" \
3964 "\n -W Display warnings about entries that had no matching files" \
3966 #define setfont_trivial_usage \
3967 "FONT [-m MAPFILE] [-C TTY]"
3968 #define setfont_full_usage "\n\n" \
3969 "Load a console font\n" \
3971 "\n -m MAPFILE Load console screen map" \
3972 "\n -C TTY Affect TTY instead of /dev/tty" \
3974 #define setfont_example_usage \
3975 "$ setfont -m koi8-r /etc/i18n/fontname\n"
3977 #define setkeycodes_trivial_usage \
3978 "SCANCODE KEYCODE..."
3979 #define setkeycodes_full_usage "\n\n" \
3980 "Set entries into the kernel's scancode-to-keycode map,\n" \
3981 "allowing unusual keyboards to generate usable keycodes.\n\n" \
3982 "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
3983 "and KEYCODE is given in decimal." \
3985 #define setkeycodes_example_usage \
3986 "$ setkeycodes e030 127\n"
3988 #define setlogcons_trivial_usage \
3990 #define setlogcons_full_usage "\n\n" \
3991 "Redirect the kernel output to console N (0 for current)"
3993 #define setsebool_trivial_usage \
3996 #define setsebool_full_usage "\n\n" \
3997 "Change boolean setting"
3999 #define setsid_trivial_usage \
4001 #define setsid_full_usage "\n\n" \
4002 "Run PROG in a new session. PROG will have no controlling terminal\n" \
4003 "and will not be affected by keyboard signals (Ctrl-C etc).\n" \
4004 "See setsid(2) for details." \
4006 #define last_trivial_usage \
4007 ""IF_FEATURE_LAST_FANCY("[-HW] [-f FILE]")
4008 #define last_full_usage "\n\n" \
4009 "Show listing of the last users that logged into the system" \
4010 IF_FEATURE_LAST_FANCY( "\n" \
4012 /* "\n -H Show header line" */ \
4013 "\n -W Display with no host column truncation" \
4014 "\n -f FILE Read from FILE instead of /var/log/wtmp" \
4017 #define showkey_trivial_usage \
4019 #define showkey_full_usage "\n\n" \
4020 "Show keys pressed\n" \
4022 "\n -a Display decimal/octal/hex values of the keys" \
4023 "\n -k Display interpreted keycodes (default)" \
4024 "\n -s Display raw scan-codes" \
4026 #define slattach_trivial_usage \
4027 "[-cehmLF] [-s SPEED] [-p PROTOCOL] DEVICE"
4028 #define slattach_full_usage "\n\n" \
4029 "Attach network interface(s) to serial line(s)\n" \
4031 "\n -p PROT Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \
4032 "\n -s SPD Set line speed" \
4033 "\n -e Exit after initializing device" \
4034 "\n -h Exit when the carrier is lost" \
4035 "\n -c PROG Run PROG when the line is hung up" \
4036 "\n -m Do NOT initialize the line in raw 8 bits mode" \
4037 "\n -L Enable 3-wire operation" \
4038 "\n -F Disable RTS/CTS flow control" \
4040 #define sleep_trivial_usage \
4041 IF_FEATURE_FANCY_SLEEP("[") "N" IF_FEATURE_FANCY_SLEEP("]...")
4042 #define sleep_full_usage "\n\n" \
4043 IF_NOT_FEATURE_FANCY_SLEEP("Pause for N seconds") \
4044 IF_FEATURE_FANCY_SLEEP( \
4045 "Pause for a time equal to the total of the args given, where each arg can\n" \
4046 "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays")
4047 #define sleep_example_usage \
4049 "[2 second delay results]\n" \
4050 IF_FEATURE_FANCY_SLEEP( \
4051 "$ sleep 1d 3h 22m 8s\n" \
4052 "[98528 second delay results]\n")
4054 #define sort_trivial_usage \
4056 IF_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \
4058 #define sort_full_usage "\n\n" \
4059 "Sort lines of text\n" \
4061 IF_FEATURE_SORT_BIG( \
4062 "\n -b Ignore leading blanks" \
4063 "\n -c Check whether input is sorted" \
4064 "\n -d Dictionary order (blank or alphanumeric only)" \
4065 "\n -f Ignore case" \
4066 "\n -g General numerical sort" \
4067 "\n -i Ignore unprintable characters" \
4069 "\n -M Sort month" \
4071 "\n -n Sort numbers" \
4072 IF_FEATURE_SORT_BIG( \
4073 "\n -o Output to file" \
4074 "\n -k Sort by key" \
4075 "\n -t CHAR Key separator" \
4077 "\n -r Reverse sort order" \
4078 IF_FEATURE_SORT_BIG( \
4079 "\n -s Stable (don't sort ties alphabetically)" \
4081 "\n -u Suppress duplicate lines" \
4082 IF_FEATURE_SORT_BIG( \
4083 "\n -z Lines are terminated by NUL, not newline" \
4084 "\n -mST Ignored for GNU compatibility") \
4086 #define sort_example_usage \
4087 "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
4094 IF_FEATURE_SORT_BIG( \
4095 "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \
4102 #define split_trivial_usage \
4103 "[OPTIONS] [INPUT [PREFIX]]"
4104 #define split_full_usage "\n\n" \
4106 "\n -b n[k|m] Split by bytes" \
4107 "\n -l n Split by lines" \
4108 "\n -a n Use n letters as suffix" \
4110 #define split_example_usage \
4111 "$ split TODO foo\n" \
4112 "$ cat TODO | split -a 2 -l 2 TODO_\n"
4114 #define start_stop_daemon_trivial_usage \
4115 "[OPTIONS] [-S|-K] ... [-- ARGS...]"
4116 #define start_stop_daemon_full_usage "\n\n" \
4117 "Search for matching processes, and then\n" \
4118 "-K: stop all matching processes.\n" \
4119 "-S: start a process unless a matching process is found.\n" \
4120 IF_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
4121 "\nProcess matching:" \
4122 "\n -u,--user USERNAME|UID Match only this user's processes" \
4123 "\n -n,--name NAME Match processes with NAME" \
4124 "\n in comm field in /proc/PID/stat" \
4125 "\n -x,--exec EXECUTABLE Match processes with this command" \
4126 "\n in /proc/PID/cmdline" \
4127 "\n -p,--pidfile FILE Match a process with PID from the file" \
4128 "\n All specified conditions must match" \
4130 "\n -x,--exec EXECUTABLE Program to run" \
4131 "\n -a,--startas NAME Zeroth argument" \
4132 "\n -b,--background Background" \
4133 IF_FEATURE_START_STOP_DAEMON_FANCY( \
4134 "\n -N,--nicelevel N Change nice level" \
4136 "\n -c,--chuid USER[:[GRP]] Change to user/group" \
4137 "\n -m,--make-pidfile Write PID to the pidfile specified by -p" \
4139 "\n -s,--signal SIG Signal to send" \
4140 "\n -t,--test Match only, exit with 0 if a process is found" \
4142 IF_FEATURE_START_STOP_DAEMON_FANCY( \
4143 "\n -o,--oknodo Exit with status 0 if nothing is done" \
4144 "\n -v,--verbose Verbose" \
4146 "\n -q,--quiet Quiet" \
4148 IF_NOT_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
4149 "\nProcess matching:" \
4150 "\n -u USERNAME|UID Match only this user's processes" \
4151 "\n -n NAME Match processes with NAME" \
4152 "\n in comm field in /proc/PID/stat" \
4153 "\n -x EXECUTABLE Match processes with this command" \
4154 "\n command in /proc/PID/cmdline" \
4155 "\n -p FILE Match a process with PID from the file" \
4156 "\n All specified conditions must match" \
4158 "\n -x EXECUTABLE Program to run" \
4159 "\n -a NAME Zeroth argument" \
4160 "\n -b Background" \
4161 IF_FEATURE_START_STOP_DAEMON_FANCY( \
4162 "\n -N N Change nice level" \
4164 "\n -c USER[:[GRP]] Change to user/group" \
4165 "\n -m Write PID to the pidfile specified by -p" \
4167 "\n -s SIG Signal to send" \
4168 "\n -t Match only, exit with 0 if a process is found" \
4170 IF_FEATURE_START_STOP_DAEMON_FANCY( \
4171 "\n -o Exit with status 0 if nothing is done" \
4177 #define stat_trivial_usage \
4179 #define stat_full_usage "\n\n" \
4180 "Display file (default) or filesystem status\n" \
4182 IF_FEATURE_STAT_FORMAT( \
4183 "\n -c fmt Use the specified format" \
4185 "\n -f Display filesystem status" \
4186 "\n -L Follow links" \
4187 "\n -t Display info in terse form" \
4189 "\n -Z Print security context" \
4191 IF_FEATURE_STAT_FORMAT( \
4192 "\n\nValid format sequences for files:\n" \
4193 " %a Access rights in octal\n" \
4194 " %A Access rights in human readable form\n" \
4195 " %b Number of blocks allocated (see %B)\n" \
4196 " %B The size in bytes of each block reported by %b\n" \
4197 " %d Device number in decimal\n" \
4198 " %D Device number in hex\n" \
4199 " %f Raw mode in hex\n" \
4201 " %g Group ID of owner\n" \
4202 " %G Group name of owner\n" \
4203 " %h Number of hard links\n" \
4204 " %i Inode number\n" \
4206 " %N File name, with -> TARGET if symlink\n" \
4207 " %o I/O block size\n" \
4208 " %s Total size, in bytes\n" \
4209 " %t Major device type in hex\n" \
4210 " %T Minor device type in hex\n" \
4211 " %u User ID of owner\n" \
4212 " %U User name of owner\n" \
4213 " %x Time of last access\n" \
4214 " %X Time of last access as seconds since Epoch\n" \
4215 " %y Time of last modification\n" \
4216 " %Y Time of last modification as seconds since Epoch\n" \
4217 " %z Time of last change\n" \
4218 " %Z Time of last change as seconds since Epoch\n" \
4219 "\nValid format sequences for file systems:\n" \
4220 " %a Free blocks available to non-superuser\n" \
4221 " %b Total data blocks in file system\n" \
4222 " %c Total file nodes in file system\n" \
4223 " %d Free file nodes in file system\n" \
4224 " %f Free blocks in file system\n" \
4226 " %C Security context in selinux\n" \
4228 " %i File System ID in hex\n" \
4229 " %l Maximum length of filenames\n" \
4231 " %s Block size (for faster transfer)\n" \
4232 " %S Fundamental block size (for block counts)\n" \
4233 " %t Type in hex\n" \
4234 " %T Type in human readable form" \
4237 #define strings_trivial_usage \
4238 "[-afo] [-n LEN] [FILE]..."
4239 #define strings_full_usage "\n\n" \
4240 "Display printable strings in a binary file\n" \
4242 "\n -a Scan whole file (default)" \
4243 "\n -f Precede strings with filenames" \
4244 "\n -n LEN At least LEN characters form a string (default 4)" \
4245 "\n -o Precede strings with decimal offsets" \
4247 #define stty_trivial_usage \
4248 "[-a|g] [-F DEVICE] [SETTING]..."
4249 #define stty_full_usage "\n\n" \
4250 "Without arguments, prints baud rate, line discipline,\n" \
4251 "and deviations from stty sane\n" \
4253 "\n -F DEVICE Open device instead of stdin" \
4254 "\n -a Print all current settings in human-readable form" \
4255 "\n -g Print in stty-readable form" \
4256 "\n [SETTING] See manpage" \
4258 #define su_trivial_usage \
4259 "[OPTIONS] [-] [USERNAME]"
4260 #define su_full_usage "\n\n" \
4261 "Change user id or become root\n" \
4263 "\n -p,-m Preserve environment" \
4264 "\n -c CMD Command to pass to 'sh -c'" \
4265 "\n -s SH Shell to use instead of default shell" \
4267 #define sulogin_trivial_usage \
4269 #define sulogin_full_usage "\n\n" \
4270 "Single user login\n" \
4274 #define sum_trivial_usage \
4276 #define sum_full_usage "\n\n" \
4277 "Checksum and count the blocks in a file\n" \
4279 "\n -r Use BSD sum algorithm (1K blocks)" \
4280 "\n -s Use System V sum algorithm (512byte blocks)" \
4282 #define sv_trivial_usage \
4283 "[-v] [-w SEC] CMD SERVICE_DIR..."
4284 #define sv_full_usage "\n\n" \
4285 "Control services monitored by runsv supervisor.\n" \
4286 "Commands (only first character is enough):\n" \
4288 "status: query service status\n" \
4289 "up: if service isn't running, start it. If service stops, restart it\n" \
4290 "once: like 'up', but if service stops, don't restart it\n" \
4291 "down: send TERM and CONT signals. If ./run exits, start ./finish\n" \
4292 " if it exists. After it stops, don't restart service\n" \
4293 "exit: send TERM and CONT signals to service and log service. If they exit,\n" \
4294 " runsv exits too\n" \
4295 "pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \
4296 "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \
4298 #define svlogd_trivial_usage \
4299 "[-ttv] [-r C] [-R CHARS] [-l MATCHLEN] [-b BUFLEN] DIR..."
4300 #define svlogd_full_usage "\n\n" \
4301 "Continuously read log data from stdin, optionally\n" \
4302 "filter log messages, and write the data to one or more automatically\n" \
4305 #define swapoff_trivial_usage \
4307 #define swapoff_full_usage "\n\n" \
4308 "Stop swapping on DEVICE\n" \
4310 "\n -a Stop swapping on all swap devices" \
4312 #define swapon_trivial_usage \
4313 "[-a]" IF_FEATURE_SWAPON_PRI(" [-p PRI]") " [DEVICE]"
4314 #define swapon_full_usage "\n\n" \
4315 "Start swapping on DEVICE\n" \
4317 "\n -a Start swapping on all swap devices" \
4318 IF_FEATURE_SWAPON_PRI( \
4319 "\n -p PRI Set swap device priority" \
4322 #define switch_root_trivial_usage \
4323 "[-c /dev/console] NEW_ROOT NEW_INIT [ARGS]"
4324 #define switch_root_full_usage "\n\n" \
4325 "Free initramfs and switch to another root fs:\n" \
4326 "chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,\n" \
4327 "execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.\n" \
4329 "\n -c DEV Reopen stdio to DEV after switch" \
4331 #define sync_trivial_usage \
4333 #define sync_full_usage "\n\n" \
4334 "Write all buffered blocks to disk"
4336 #define fsync_trivial_usage \
4338 #define fsync_full_usage "\n\n" \
4339 "Write files' buffered blocks to disk\n" \
4341 "\n -d Avoid syncing metadata"
4343 #define sysctl_trivial_usage \
4344 "[OPTIONS] [VALUE]..."
4345 #define sysctl_full_usage "\n\n" \
4346 "Configure kernel parameters at runtime\n" \
4348 "\n -n Don't print key names" \
4349 "\n -e Don't warn about unknown keys" \
4350 "\n -w Change sysctl setting" \
4351 "\n -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)" \
4352 "\n -a Display all values" \
4353 "\n -A Display all values in table form" \
4355 #define sysctl_example_usage \
4356 "sysctl [-n] [-e] variable...\n" \
4357 "sysctl [-n] [-e] -w variable=value...\n" \
4358 "sysctl [-n] [-e] -a\n" \
4359 "sysctl [-n] [-e] -p file (default /etc/sysctl.conf)\n" \
4360 "sysctl [-n] [-e] -A\n"
4362 #define syslogd_trivial_usage \
4364 #define syslogd_full_usage "\n\n" \
4365 "System logging utility.\n" \
4366 "This version of syslogd ignores /etc/syslog.conf\n" \
4368 "\n -n Run in foreground" \
4369 "\n -O FILE Log to given file (default:/var/log/messages)" \
4370 "\n -l N Set local log level" \
4371 "\n -S Smaller logging output" \
4372 IF_FEATURE_ROTATE_LOGFILE( \
4373 "\n -s SIZE Max size (KB) before rotate (default:200KB, 0=off)" \
4374 "\n -b N N rotated logs to keep (default:1, max=99, 0=purge)") \
4375 IF_FEATURE_REMOTE_LOG( \
4376 "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
4377 "\n -L Log locally and via network (default is network only if -R)") \
4378 IF_FEATURE_SYSLOGD_DUP( \
4379 "\n -D Drop duplicates") \
4380 IF_FEATURE_IPC_SYSLOG( \
4381 "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") \
4382 /* NB: -Csize shouldn't have space (because size is optional) */
4383 /* "\n -m MIN Minutes between MARK lines (default:20, 0=off)" */
4385 #define syslogd_example_usage \
4386 "$ syslogd -R masterlog:514\n" \
4387 "$ syslogd -R 192.168.1.1:601\n"
4389 #define tac_trivial_usage \
4391 #define tac_full_usage "\n\n" \
4392 "Concatenate FILEs and print them in reverse"
4394 #define tar_trivial_usage \
4395 "-[" IF_FEATURE_TAR_CREATE("c") "xt" IF_FEATURE_SEAMLESS_GZ("z") \
4396 IF_FEATURE_SEAMLESS_BZ2("j") IF_FEATURE_SEAMLESS_LZMA("a") \
4397 IF_FEATURE_SEAMLESS_Z("Z") IF_FEATURE_TAR_NOPRESERVE_TIME("m") "vO] " \
4398 IF_FEATURE_TAR_FROM("[-X FILE] ") \
4399 "[-f TARFILE] [-C DIR] [FILE]..."
4400 #define tar_full_usage "\n\n" \
4401 IF_FEATURE_TAR_CREATE("Create, extract, ") \
4402 IF_NOT_FEATURE_TAR_CREATE("Extract ") \
4403 "or list files from a tar file\n" \
4405 IF_FEATURE_TAR_CREATE( \
4410 "\nArchive format selection:" \
4411 IF_FEATURE_SEAMLESS_GZ( \
4412 "\n z Filter the archive through gzip" \
4414 IF_FEATURE_SEAMLESS_BZ2( \
4415 "\n j Filter the archive through bzip2" \
4417 IF_FEATURE_SEAMLESS_LZMA( \
4418 "\n a Filter the archive through lzma" \
4420 IF_FEATURE_SEAMLESS_Z( \
4421 "\n Z Filter the archive through compress" \
4423 IF_FEATURE_TAR_NOPRESERVE_TIME( \
4424 "\n m Do not restore mtime" \
4426 "\nFile selection:" \
4427 "\n f Name of TARFILE or \"-\" for stdin" \
4428 "\n O Extract to stdout" \
4429 IF_FEATURE_TAR_FROM( \
4430 IF_FEATURE_TAR_LONG_OPTIONS( \
4431 "\n exclude File to exclude" \
4433 "\n X File with names to exclude" \
4435 "\n C Change to DIR before operation" \
4438 #define tar_example_usage \
4439 "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
4440 "$ tar -cf /tmp/tarball.tar /usr/local\n"
4442 #define taskset_trivial_usage \
4443 "[-p] [MASK] [PID | PROG ARGS]"
4444 #define taskset_full_usage "\n\n" \
4445 "Set or get CPU affinity\n" \
4447 "\n -p Operate on an existing PID" \
4449 #define taskset_example_usage \
4450 "$ taskset 0x7 ./dgemm_test&\n" \
4451 "$ taskset -p 0x1 $!\n" \
4452 "pid 4790's current affinity mask: 7\n" \
4453 "pid 4790's new affinity mask: 1\n" \
4454 "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
4455 "pid 6671's current affinity mask: 1\n" \
4456 "pid 6671's new affinity mask: 1\n" \
4457 "$ taskset -p 1\n" \
4458 "pid 1's current affinity mask: 3\n"
4460 #define tee_trivial_usage \
4461 "[OPTIONS] [FILE]..."
4462 #define tee_full_usage "\n\n" \
4463 "Copy stdin to each FILE, and also to stdout\n" \
4465 "\n -a Append to the given FILEs, don't overwrite" \
4466 "\n -i Ignore interrupt signals (SIGINT)" \
4468 #define tee_example_usage \
4469 "$ echo \"Hello\" | tee /tmp/foo\n" \
4470 "$ cat /tmp/foo\n" \
4473 #if ENABLE_FEATURE_TELNET_AUTOLOGIN
4474 #define telnet_trivial_usage \
4475 "[-a] [-l USER] HOST [PORT]"
4476 #define telnet_full_usage "\n\n" \
4477 "Connect to telnet server\n" \
4479 "\n -a Automatic login with $USER variable" \
4480 "\n -l USER Automatic login as USER" \
4483 #define telnet_trivial_usage \
4485 #define telnet_full_usage "\n\n" \
4486 "Connect to telnet server"
4489 #define telnetd_trivial_usage \
4491 #define telnetd_full_usage "\n\n" \
4492 "Handle incoming telnet connections" \
4493 IF_NOT_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \
4495 "\n -l LOGIN Exec LOGIN on connect" \
4496 "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
4497 "\n -K Close connection as soon as login exits" \
4498 "\n (normally wait until all programs close slave pty)" \
4499 IF_FEATURE_TELNETD_STANDALONE( \
4500 "\n -p PORT Port to listen on" \
4501 "\n -b ADDR[:PORT] Address to bind to" \
4502 "\n -F Run in foreground" \
4503 "\n -i Inetd mode" \
4504 IF_FEATURE_TELNETD_INETD_WAIT( \
4505 "\n -w SEC Inetd 'wait' mode, linger time SEC" \
4506 "\n -S Log to syslog (implied by -i or without -F and -w)" \
4510 /* "test --help" does not print help (POSIX compat), only "[ --help" does.
4511 * We display "<applet> EXPRESSION ]" here (not "<applet> EXPRESSION")
4512 * Unfortunately, it screws up generated BusyBox.html. TODO. */
4513 #define test_trivial_usage \
4515 #define test_full_usage "\n\n" \
4516 "Check file types, compare values etc. Return a 0/1 exit code\n" \
4517 "depending on logical value of EXPRESSION"
4518 #define test_example_usage \
4519 "$ test 1 -eq 2\n" \
4522 "$ test 1 -eq 1\n" \
4528 "$ [ -d /junk ]\n" \
4532 #define tc_trivial_usage \
4533 /*"[OPTIONS] "*/"OBJECT CMD [dev STRING]"
4534 #define tc_full_usage "\n\n" \
4535 "OBJECT: {qdisc|class|filter}\n" \
4536 "CMD: {add|del|change|replace|show}\n" \
4538 "qdisc [ handle QHANDLE ] [ root |"IF_FEATURE_TC_INGRESS(" ingress |")" parent CLASSID ]\n" \
4539 /* "[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
4540 " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
4541 " QDISC_KIND := { [p|b]fifo | tbf | prio | cbq | red | etc. }\n" \
4542 "qdisc show [ dev STRING ]"IF_FEATURE_TC_INGRESS(" [ingress]")"\n" \
4543 "class [ classid CLASSID ] [ root | parent CLASSID ]\n" \
4544 " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
4545 "class show [ dev STRING ] [ root | parent CLASSID ]\n" \
4546 "filter [ pref PRIO ] [ protocol PROTO ]\n" \
4547 /* "\t[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
4548 " [ root | classid CLASSID ] [ handle FILTERID ]\n" \
4549 " [ [ FILTER_TYPE ] [ help | OPTIONS ] ]\n" \
4550 "filter show [ dev STRING ] [ root | parent CLASSID ]"
4552 #define tcpsvd_trivial_usage \
4553 "[-hEv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] IP PORT PROG"
4554 /* with not-implemented options: */
4555 /* "[-hpEvv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] [-i DIR|-x CDB] [-t SEC] IP PORT PROG" */
4556 #define tcpsvd_full_usage "\n\n" \
4557 "Create TCP socket, bind to IP:PORT and listen\n" \
4558 "for incoming connection. Run PROG for each connection.\n" \
4559 "\n IP IP to listen on. '0' = all" \
4560 "\n PORT Port to listen on" \
4561 "\n PROG ARGS Program to run" \
4562 "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
4563 "\n -u USER[:GRP] Change to user/group after bind" \
4564 "\n -c N Handle up to N connections simultaneously" \
4565 "\n -b N Allow a backlog of approximately N TCP SYNs" \
4566 "\n -C N[:MSG] Allow only up to N connections from the same IP" \
4567 "\n New connections from this IP address are closed" \
4568 "\n immediately. MSG is written to the peer before close" \
4569 "\n -h Look up peer's hostname" \
4570 "\n -E Don't set up environment variables" \
4573 #define udpsvd_trivial_usage \
4574 "[-hEv] [-c N] [-u USER] [-l NAME] IP PORT PROG"
4575 #define udpsvd_full_usage "\n\n" \
4576 "Create UDP socket, bind to IP:PORT and wait\n" \
4577 "for incoming packets. Run PROG for each packet,\n" \
4578 "redirecting all further packets with same peer ip:port to it.\n" \
4579 "\n IP IP to listen on. '0' = all" \
4580 "\n PORT Port to listen on" \
4581 "\n PROG ARGS Program to run" \
4582 "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
4583 "\n -u USER[:GRP] Change to user/group after bind" \
4584 "\n -c N Handle up to N connections simultaneously" \
4585 "\n -h Look up peer's hostname" \
4586 "\n -E Don't set up environment variables" \
4589 #define tftp_trivial_usage \
4590 "[OPTIONS] HOST [PORT]"
4591 #define tftp_full_usage "\n\n" \
4592 "Transfer a file from/to tftp server\n" \
4594 "\n -l FILE Local FILE" \
4595 "\n -r FILE Remote FILE" \
4596 IF_FEATURE_TFTP_GET( \
4599 IF_FEATURE_TFTP_PUT( \
4602 IF_FEATURE_TFTP_BLOCKSIZE( \
4603 "\n -b SIZE Transfer blocks of SIZE octets" \
4606 #define tftpd_trivial_usage \
4607 "[-cr] [-u USER] [DIR]"
4608 #define tftpd_full_usage "\n\n" \
4609 "Transfer a file on tftp client's request\n" \
4611 "tftpd should be used as an inetd service.\n" \
4612 "tftpd's line for inetd.conf:\n" \
4613 " 69 dgram udp nowait root tftpd tftpd /files/to/serve\n" \
4614 "It also can be ran from udpsvd:\n" \
4615 " udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve\n" \
4617 "\n -r Prohibit upload" \
4618 "\n -c Allow file creation via upload" \
4619 "\n -u Access files as USER" \
4621 #define time_trivial_usage \
4622 "[OPTIONS] PROG ARGS"
4623 #define time_full_usage "\n\n" \
4624 "Run PROG, display resource usage when it exits\n" \
4628 #define timeout_trivial_usage \
4629 "[-t SECS] [-s SIG] PROG ARGS"
4630 #define timeout_full_usage "\n\n" \
4631 "Runs PROG. Sends SIG to it if it is not gone in SECS seconds.\n" \
4632 "Defaults: SECS: 10, SIG: TERM." \
4634 #define top_trivial_usage \
4635 "[-b] [-nCOUNT] [-dSECONDS]" IF_FEATURE_TOPMEM(" [-m]")
4636 #define top_full_usage "\n\n" \
4637 "Provide a view of process activity in real time.\n" \
4638 "Read the status of all processes from /proc each SECONDS\n" \
4639 "and display a screenful of them." \
4640 //TODO: add options and keyboard commands
4642 #define touch_trivial_usage \
4643 "[-c] [-d DATE] FILE [FILE]..."
4644 #define touch_full_usage "\n\n" \
4645 "Update the last-modified date on the given FILE[s]\n" \
4647 "\n -c Don't create files" \
4648 "\n -d DT Date/time to use" \
4650 #define touch_example_usage \
4651 "$ ls -l /tmp/foo\n" \
4652 "/bin/ls: /tmp/foo: No such file or directory\n" \
4653 "$ touch /tmp/foo\n" \
4654 "$ ls -l /tmp/foo\n" \
4655 "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
4657 #define tr_trivial_usage \
4658 "[-cds] STRING1 [STRING2]"
4659 #define tr_full_usage "\n\n" \
4660 "Translate, squeeze, or delete characters from stdin, writing to stdout\n" \
4662 "\n -c Take complement of STRING1" \
4663 "\n -d Delete input characters coded STRING1" \
4664 "\n -s Squeeze multiple output characters of STRING2 into one character" \
4666 #define tr_example_usage \
4667 "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
4670 #define traceroute_trivial_usage \
4671 "[-"IF_TRACEROUTE6("46")"FIldnrv] [-f 1ST_TTL] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
4672 " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-g GATEWAY] [-i IFACE]\n" \
4673 " [-z PAUSE_MSEC] HOST [BYTES]"
4674 #define traceroute_full_usage "\n\n" \
4675 "Trace the route to HOST\n" \
4678 "\n -4, -6 Force IP or IPv6 name resolution" \
4680 "\n -F Set the don't fragment bit" \
4681 "\n -I Use ICMP ECHO instead of UDP datagrams" \
4682 "\n -l Display the TTL value of the returned packet" \
4683 "\n -d Set SO_DEBUG options to socket" \
4684 "\n -n Print numeric addresses" \
4685 "\n -r Bypass routing tables, send directly to HOST" \
4687 "\n -m Max time-to-live (max number of hops)" \
4688 "\n -p Base UDP port number used in probes" \
4689 "\n (default 33434)" \
4690 "\n -q Number of probes per TTL (default 3)" \
4691 "\n -s IP address to use as the source address" \
4692 "\n -t Type-of-service in probe packets (default 0)" \
4693 "\n -w Time in seconds to wait for a response (default 3)" \
4694 "\n -g Loose source route gateway (8 max)" \
4696 #define traceroute6_trivial_usage \
4697 "[-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
4698 " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-i IFACE]\n" \
4700 #define traceroute6_full_usage "\n\n" \
4701 "Trace the route to HOST\n" \
4703 "\n -d Set SO_DEBUG options to socket" \
4704 "\n -n Print numeric addresses" \
4705 "\n -r Bypass routing tables, send directly to HOST" \
4707 "\n -m Max time-to-live (max number of hops)" \
4708 "\n -p Base UDP port number used in probes" \
4709 "\n (default is 33434)" \
4710 "\n -q Number of probes per TTL (default 3)" \
4711 "\n -s IP address to use as the source address" \
4712 "\n -t Type-of-service in probe packets (default 0)" \
4713 "\n -w Time in seconds to wait for a response (default 3)" \
4715 #define true_trivial_usage \
4717 #define true_full_usage "\n\n" \
4718 "Return an exit code of TRUE (0)"
4719 #define true_example_usage \
4724 #define tty_trivial_usage \
4726 #define tty_full_usage "\n\n" \
4727 "Print file name of stdin's terminal" \
4728 IF_INCLUDE_SUSv2( "\n" \
4730 "\n -s Print nothing, only return exit status" \
4732 #define tty_example_usage \
4736 #define ttysize_trivial_usage \
4738 #define ttysize_full_usage "\n\n" \
4739 "Print dimension(s) of stdin's terminal, on error return 80x25"
4741 #define tunctl_trivial_usage \
4742 "[-f device] ([-t name] | -d name)" IF_FEATURE_TUNCTL_UG(" [-u owner] [-g group] [-b]")
4743 #define tunctl_full_usage "\n\n" \
4744 "Create or delete tun interfaces\n" \
4746 "\n -f name tun device (/dev/net/tun)" \
4747 "\n -t name Create iface 'name'" \
4748 "\n -d name Delete iface 'name'" \
4749 IF_FEATURE_TUNCTL_UG( \
4750 "\n -u owner Set iface owner" \
4751 "\n -g group Set iface group" \
4752 "\n -b Brief output" \
4754 #define tunctl_example_usage \
4756 "# tunctl -d tun0\n"
4758 #define tune2fs_trivial_usage \
4759 /* "[-c max-mounts-count] [-e errors-behavior] [-g group] " */ \
4760 /* "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " */ \
4761 /* "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " */ \
4762 /* "[-r reserved-blocks-count] [-u user] [-C mount-count] " */ \
4764 /* "[-M last-mounted-dir] [-O [^]feature[,...]] " */ \
4765 /* "[-T last-check-time] [-U UUID] " */ \
4767 #define tune2fs_full_usage "\n\n" \
4768 "Adjust filesystem options on ext[23] filesystems"
4770 #define udhcpc_trivial_usage \
4771 "[-fbnqvoCR] [-i IFACE] [-r IP] [-s PROG] [-p PIDFILE]\n" \
4772 " [-H HOSTNAME] [-c CID] [-V VENDOR] [-O DHCP_OPT]..." IF_FEATURE_UDHCP_PORT(" [-P N]")
4773 #define udhcpc_full_usage "\n" \
4775 "\n -i,--interface IFACE Interface to use (default eth0)" \
4776 "\n -p,--pidfile FILE Create pidfile" \
4777 "\n -r,--request IP IP address to request" \
4778 "\n -s,--script PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
4779 "\n -t,--retries N Send up to N discover packets" \
4780 "\n -T,--timeout N Pause between packets (default 3 seconds)" \
4781 "\n -A,--tryagain N Wait N seconds after failure (default 20)" \
4782 "\n -f,--foreground Run in foreground" \
4784 "\n -b,--background Background if lease is not obtained" \
4786 "\n -S,--syslog Log to syslog too" \
4787 "\n -n,--now Exit if lease is not obtained" \
4788 "\n -q,--quit Exit after obtaining lease" \
4789 "\n -R,--release Release IP on exit" \
4790 IF_FEATURE_UDHCP_PORT( \
4791 "\n -P,--client-port N Use port N (default 68)" \
4793 IF_FEATURE_UDHCPC_ARPING( \
4794 "\n -a,--arping Use arping to validate offered address" \
4796 "\n -O,--request-option OPT Request DHCP option OPT (cumulative)" \
4797 "\n -o,--no-default-options Don't request any options (unless -O is given)" \
4798 "\n -x OPT:VAL Include option OPT in sent packets (cumulative)" \
4799 "\n -F,--fqdn NAME Ask server to update DNS mapping for NAME" \
4800 "\n -H,-h,--hostname NAME Send NAME as client hostname (default none)" \
4801 "\n -V,--vendorclass VENDOR Vendor identifier (default 'udhcp VERSION')" \
4802 "\n -c,--clientid CLIENTID Client identifier (default own MAC)" \
4803 "\n -C,--clientid-none Don't send client identifier" \
4806 "\n -i IFACE Interface to use (default eth0)" \
4807 "\n -p FILE Create pidfile" \
4808 "\n -r IP IP address to request" \
4809 "\n -s PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
4810 "\n -t N Send up to N discover packets" \
4811 "\n -T N Pause between packets (default 3 seconds)" \
4812 "\n -A N Wait N seconds (default 20) after failure" \
4813 "\n -x OPT:VAL Include option OPT in sent packets" \
4814 "\n -O OPT Request DHCP option OPT (cumulative)" \
4815 "\n -o Don't request any options (unless -O is given)" \
4816 "\n -f Run in foreground" \
4818 "\n -b Background if lease is not obtained" \
4820 "\n -S Log to syslog too" \
4821 "\n -n Exit if lease is not obtained" \
4822 "\n -q Exit after obtaining lease" \
4823 "\n -R Release IP on exit" \
4824 IF_FEATURE_UDHCP_PORT( \
4825 "\n -P N Use port N (default 68)" \
4827 IF_FEATURE_UDHCPC_ARPING( \
4828 "\n -a Use arping to validate offered address" \
4830 "\n -F NAME Ask server to update DNS mapping for NAME" \
4831 "\n -H,-h NAME Send NAME as client hostname (default none)" \
4832 "\n -V VENDOR Vendor identifier (default 'udhcp VERSION')" \
4833 "\n -c CLIENTID Client identifier (default own MAC)" \
4834 "\n -C Don't send client identifier" \
4837 #define udhcpd_trivial_usage \
4838 "[-fS]" IF_FEATURE_UDHCP_PORT(" [-P N]") " [configfile]" \
4840 #define udhcpd_full_usage "\n\n" \
4842 "\n -f Run in foreground" \
4843 "\n -S Log to syslog too" \
4844 IF_FEATURE_UDHCP_PORT( \
4845 "\n -P N Use port N (default 67)" \
4848 #define umount_trivial_usage \
4849 "[OPTIONS] FILESYSTEM|DIRECTORY"
4850 #define umount_full_usage "\n\n" \
4851 "Unmount file systems\n" \
4853 IF_FEATURE_UMOUNT_ALL( \
4854 "\n -a Unmount all file systems" IF_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
4856 IF_FEATURE_MTAB_SUPPORT( \
4857 "\n -n Don't erase /etc/mtab entries" \
4859 "\n -r Try to remount devices as read-only if mount is busy" \
4860 "\n -l Lazy umount (detach filesystem)" \
4861 "\n -f Force umount (i.e., unreachable NFS server)" \
4862 IF_FEATURE_MOUNT_LOOP( \
4863 "\n -d Free loop device if it has been used" \
4866 #define umount_example_usage \
4867 "$ umount /dev/hdc1\n"
4869 #define uname_trivial_usage \
4871 #define uname_full_usage "\n\n" \
4872 "Print system information\n" \
4875 "\n -m The machine (hardware) type" \
4877 "\n -r OS release" \
4878 "\n -s OS name (default)" \
4879 "\n -p Processor type" \
4880 "\n -v OS version" \
4882 #define uname_example_usage \
4884 "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
4886 #define uncompress_trivial_usage \
4888 #define uncompress_full_usage "\n\n" \
4889 "Decompress .Z file[s]\n" \
4891 "\n -c Write to stdout" \
4894 #define unexpand_trivial_usage \
4895 "[-fa][-t N] [FILE]..."
4896 #define unexpand_full_usage "\n\n" \
4897 "Convert spaces to tabs, writing to stdout\n" \
4899 IF_FEATURE_UNEXPAND_LONG_OPTIONS( \
4900 "\n -a,--all Convert all blanks" \
4901 "\n -f,--first-only Convert only leading blanks" \
4902 "\n -t,--tabs=N Tabstops every N chars" \
4904 IF_NOT_FEATURE_UNEXPAND_LONG_OPTIONS( \
4905 "\n -a Convert all blanks" \
4906 "\n -f Convert only leading blanks" \
4907 "\n -t N Tabstops every N chars" \
4910 #define uniq_trivial_usage \
4911 "[-cdu][-f,s,w N] [INPUT [OUTPUT]]"
4912 #define uniq_full_usage "\n\n" \
4913 "Discard duplicate lines\n" \
4915 "\n -c Prefix lines by the number of occurrences" \
4916 "\n -d Only print duplicate lines" \
4917 "\n -u Only print unique lines" \
4918 "\n -f N Skip first N fields" \
4919 "\n -s N Skip first N chars (after any skipped fields)" \
4920 "\n -w N Compare N characters in line" \
4922 #define uniq_example_usage \
4923 "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
4928 #define unzip_trivial_usage \
4929 "[-opts[modifiers]] FILE[.zip] [LIST] [-x XLIST] [-d DIR]"
4930 #define unzip_full_usage "\n\n" \
4931 "Extract files from ZIP archives\n" \
4933 "\n -l List archive contents (with -q for short form)" \
4934 "\n -n Never overwrite files (default)" \
4936 "\n -p Send output to stdout" \
4938 "\n -x XLST Exclude these files" \
4939 "\n -d DIR Extract files into DIR" \
4941 #define uptime_trivial_usage \
4943 #define uptime_full_usage "\n\n" \
4944 "Display the time since the last boot"
4946 #define uptime_example_usage \
4948 " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
4950 #define usleep_trivial_usage \
4952 #define usleep_full_usage "\n\n" \
4953 "Pause for N microseconds"
4955 #define usleep_example_usage \
4956 "$ usleep 1000000\n" \
4957 "[pauses for 1 second]\n"
4959 #define uudecode_trivial_usage \
4960 "[-o OUTFILE] [INFILE]"
4961 #define uudecode_full_usage "\n\n" \
4962 "Uudecode a file\n" \
4963 "Finds outfile name in uuencoded source unless -o is given"
4965 #define uudecode_example_usage \
4966 "$ uudecode -o busybox busybox.uu\n" \
4967 "$ ls -l busybox\n" \
4968 "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
4970 #define uuencode_trivial_usage \
4971 "[-m] [INFILE] STORED_FILENAME"
4972 #define uuencode_full_usage "\n\n" \
4973 "Uuencode a file to stdout\n" \
4975 "\n -m Use base64 encoding per RFC1521" \
4977 #define uuencode_example_usage \
4978 "$ uuencode busybox busybox\n" \
4979 "begin 755 busybox\n" \
4980 "<encoded file snipped>\n" \
4981 "$ uudecode busybox busybox > busybox.uu\n" \
4984 #define vconfig_trivial_usage \
4986 #define vconfig_full_usage "\n\n" \
4987 "Create and remove virtual ethernet devices\n" \
4989 "\n add [interface-name] [vlan_id]" \
4990 "\n rem [vlan-name]" \
4991 "\n set_flag [interface-name] [flag-num] [0 | 1]" \
4992 "\n set_egress_map [vlan-name] [skb_priority] [vlan_qos]" \
4993 "\n set_ingress_map [vlan-name] [skb_priority] [vlan_qos]" \
4994 "\n set_name_type [name-type]" \
4996 #define vi_trivial_usage \
4997 "[OPTIONS] [FILE]..."
4998 #define vi_full_usage "\n\n" \
5001 IF_FEATURE_VI_COLON( \
5002 "\n -c Initial command to run ($EXINIT also available)") \
5003 IF_FEATURE_VI_READONLY( \
5004 "\n -R Read-only") \
5005 "\n -H Short help regarding available features" \
5007 #define vlock_trivial_usage \
5009 #define vlock_full_usage "\n\n" \
5010 "Lock a virtual terminal. A password is required to unlock.\n" \
5012 "\n -a Lock all VTs" \
5014 #define volname_trivial_usage \
5016 #define volname_full_usage "\n\n" \
5017 "Show CD volume name of the DEVICE (default /dev/cdrom)"
5019 #define wall_trivial_usage \
5021 #define wall_full_usage "\n\n" \
5022 "Write content of FILE or stdin to all logged-in users"
5023 #define wall_sample_usage \
5024 "echo foo | wall\n" \
5027 #define watch_trivial_usage \
5028 "[-n SEC] [-t] PROG ARGS"
5029 #define watch_full_usage "\n\n" \
5030 "Run PROG periodically\n" \
5032 "\n -n Loop period in seconds (default 2)" \
5033 "\n -t Don't print header" \
5035 #define watch_example_usage \
5037 "Mon Dec 17 10:31:40 GMT 2000\n" \
5038 "Mon Dec 17 10:31:42 GMT 2000\n" \
5039 "Mon Dec 17 10:31:44 GMT 2000"
5041 #define watchdog_trivial_usage \
5042 "[-t N[ms]] [-T N[ms]] [-F] DEV"
5043 #define watchdog_full_usage "\n\n" \
5044 "Periodically write to watchdog device DEV\n" \
5046 "\n -T N Reboot after N seconds if not reset (default 60)" \
5047 "\n -t N Reset every N seconds (default 30)" \
5048 "\n -F Run in foreground" \
5050 "\nUse 500ms to specify period in milliseconds" \
5052 #define wc_trivial_usage \
5053 "[OPTIONS] [FILE]..."
5054 #define wc_full_usage "\n\n" \
5055 "Print line, word, and byte counts for each FILE (or stdin),\n" \
5056 "and a total line if more than one FILE is specified\n" \
5058 "\n -c Print the byte counts" \
5059 "\n -l Print the newline counts" \
5060 "\n -L Print the length of the longest line" \
5061 "\n -w Print the word counts" \
5063 #define wc_example_usage \
5064 "$ wc /etc/passwd\n" \
5065 " 31 46 1365 /etc/passwd\n"
5067 #define wget_trivial_usage \
5068 IF_FEATURE_WGET_LONG_OPTIONS( \
5069 "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document FILE]\n" \
5070 " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
5071 " [--no-check-certificate] [-U|--user-agent AGENT] URL" \
5073 IF_NOT_FEATURE_WGET_LONG_OPTIONS( \
5074 "[-csq] [-O FILE] [-Y on/off] [-P DIR] [-U AGENT] URL" \
5076 #define wget_full_usage "\n\n" \
5077 "Retrieve files via HTTP or FTP\n" \
5079 "\n -s Spider mode - only check file existence" \
5080 "\n -c Continue retrieval of aborted transfer" \
5082 "\n -P Set directory prefix to DIR" \
5083 "\n -O FILE Save to FILE ('-' for stdout)" \
5084 "\n -U STR Use STR for User-Agent header" \
5085 "\n -Y Use proxy ('on' or 'off')" \
5087 #define which_trivial_usage \
5089 #define which_full_usage "\n\n" \
5091 #define which_example_usage \
5095 #define who_trivial_usage \
5097 #define who_full_usage "\n\n" \
5098 "Show who is logged on\n" \
5102 #define whoami_trivial_usage \
5104 #define whoami_full_usage "\n\n" \
5105 "Print the user name associated with the current effective user id"
5107 #define xargs_trivial_usage \
5108 "[OPTIONS] [PROG ARGS]"
5109 #define xargs_full_usage "\n\n" \
5110 "Run PROG on every item given by stdin\n" \
5112 IF_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
5113 "\n -p Ask user whether to run each command") \
5114 "\n -r Don't run command if input is empty" \
5115 IF_FEATURE_XARGS_SUPPORT_ZERO_TERM( \
5116 "\n -0 Input is separated by NUL characters") \
5117 "\n -t Print the command on stderr before execution" \
5118 "\n -e[STR] STR stops input processing" \
5119 "\n -n N Pass no more than N args to PROG" \
5120 "\n -s N Pass command line of no more than N bytes" \
5121 IF_FEATURE_XARGS_SUPPORT_TERMOPT( \
5122 "\n -x Exit if size is exceeded") \
5124 #define xargs_example_usage \
5125 "$ ls | xargs gzip\n" \
5126 "$ find . -name '*.c' -print | xargs rm\n"
5128 #define zcat_trivial_usage \
5130 #define zcat_full_usage "\n\n" \
5131 "Decompress to stdout"
5133 #define zcip_trivial_usage \
5134 "[OPTIONS] IFACE SCRIPT"
5135 #define zcip_full_usage "\n\n" \
5136 "Manage a ZeroConf IPv4 link-local address\n" \
5138 "\n -f Run in foreground" \
5139 "\n -q Quit after obtaining address" \
5140 "\n -r 169.254.x.x Request this address first" \
5143 "\nWith no -q, runs continuously monitoring for ARP conflicts," \
5144 "\nexits only on I/O errors (link down etc)" \
projects / oweals / busybox.git / blob