1 /* vi: set sw=8 ts=8: */
3 * This file suffers from chronically incorrect tabification
4 * of messages. Before editing this file:
5 * 1. Switch you editor to 8-space tab mode.
6 * 2. Do not use \t in messages, use real tab character.
7 * 3. Start each source line with message as follows:
8 * |<7 spaces>"text with tabs"....
10 * |<5 spaces>"\ntext with tabs"....
16 #define NOUSAGE_STR "\b"
18 #define acpid_trivial_usage \
19 "[-d] [-c CONFDIR] [-l LOGFILE] [-e PROC_EVENT_FILE] [EVDEV_EVENT_FILE]..."
20 #define acpid_full_usage "\n\n" \
21 "Listen to ACPI events and spawn specific helpers on event arrival\n" \
23 "\n -d Don't daemonize, log to stderr" \
24 "\n -c DIR Config directory [/etc/acpi]" \
25 "\n -e FILE /proc event file [/proc/acpi/event]" \
26 "\n -l FILE Log file [/var/log/acpid]" \
27 IF_FEATURE_ACPID_COMPAT( \
28 "\n\nAccept and ignore compatibility options -g -m -s -S -v" \
31 #define acpid_example_usage \
32 "# acpid -l /var/log/my-acpi-log\n" \
33 "# acpid -d /dev/input/event*\n"
35 #define addgroup_trivial_usage \
36 "[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[USER] ") "GROUP"
37 #define addgroup_full_usage "\n\n" \
38 "Add a group " IF_FEATURE_ADDUSER_TO_GROUP("or add a user to a group") "\n" \
40 "\n -g GID Group id" \
41 "\n -S Create a system group" \
43 #define adduser_trivial_usage \
45 #define adduser_full_usage "\n\n" \
48 "\n -h DIR Home directory" \
49 "\n -g GECOS GECOS field" \
50 "\n -s SHELL Login shell" \
51 "\n -G GRP Add user to existing group" \
52 "\n -S Create a system user" \
53 "\n -D Don't assign a password" \
54 "\n -H Don't create home directory" \
57 #define adjtimex_trivial_usage \
58 "[-q] [-o OFF] [-f FREQ] [-p TCONST] [-t TICK]"
59 #define adjtimex_full_usage "\n\n" \
60 "Read and optionally set system timebase parameters. See adjtimex(2)\n" \
63 "\n -o OFF Time offset, microseconds" \
64 "\n -f FREQ Frequency adjust, integer kernel units (65536 is 1ppm)" \
65 "\n (positive values make clock run faster)" \
66 "\n -t TICK Microseconds per tick, usually 10000" \
69 #define ar_trivial_usage \
70 "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
71 #define ar_full_usage "\n\n" \
72 "Extract or list FILES from an ar archive\n" \
74 "\n -o Preserve original dates" \
75 "\n -p Extract to stdout" \
80 #define arp_trivial_usage \
81 "\n[-vn] [-H HWTYPE] [-i IF] -a [HOSTNAME]" \
82 "\n[-v] [-i IF] -d HOSTNAME [pub]" \
83 "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]" \
84 "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub" \
85 "\n[-v] [-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub"
86 #define arp_full_usage "\n\n" \
87 "Manipulate ARP cache\n" \
89 "\n -a Display (all) hosts" \
90 "\n -s Set new ARP entry" \
91 "\n -d Delete a specified entry" \
93 "\n -n Don't resolve names" \
94 "\n -i IF Network interface" \
95 "\n -D Read <hwaddr> from given device" \
96 "\n -A, -p AF Protocol family" \
97 "\n -H HWTYPE Hardware address type" \
99 #define arping_trivial_usage \
100 "[-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP"
101 #define arping_full_usage "\n\n" \
102 "Send ARP requests/replies\n" \
104 "\n -f Quit on first ARP reply" \
106 "\n -b Keep broadcasting, don't go unicast" \
107 "\n -D Duplicated address detection mode" \
108 "\n -U Unsolicited ARP mode, update your neighbors" \
109 "\n -A ARP answer mode, update your neighbors" \
110 "\n -c N Stop after sending N ARP requests" \
111 "\n -w TIMEOUT Time to wait for ARP reply, seconds" \
112 "\n -I IFACE Interface to use (default eth0)" \
113 "\n -s SRC_IP Sender IP address" \
114 "\n DST_IP Target IP address" \
116 #define sh_trivial_usage NOUSAGE_STR
117 #define sh_full_usage ""
118 #define ash_trivial_usage NOUSAGE_STR
119 #define ash_full_usage ""
120 #define hush_trivial_usage NOUSAGE_STR
121 #define hush_full_usage ""
122 #define lash_trivial_usage NOUSAGE_STR
123 #define lash_full_usage ""
124 #define msh_trivial_usage NOUSAGE_STR
125 #define msh_full_usage ""
127 #define awk_trivial_usage \
128 "[OPTIONS] [AWK_PROGRAM] [FILE]..."
129 #define awk_full_usage "\n\n" \
131 "\n -v VAR=VAL Set variable" \
132 "\n -F SEP Use SEP as field separator" \
133 "\n -f FILE Read program from FILE" \
135 #define basename_trivial_usage \
137 #define basename_full_usage "\n\n" \
138 "Strip directory path and .SUFFIX from FILE\n"
139 #define basename_example_usage \
140 "$ basename /usr/local/bin/foo\n" \
142 "$ basename /usr/local/bin/\n" \
144 "$ basename /foo/bar.txt .txt\n" \
147 #define beep_trivial_usage \
148 "-f FREQ -l LEN -d DELAY -r COUNT -n"
149 #define beep_full_usage "\n\n" \
151 "\n -f Frequency in Hz" \
152 "\n -l Length in ms" \
153 "\n -d Delay in ms" \
154 "\n -r Repetitions" \
155 "\n -n Start new tone" \
157 #define fbsplash_trivial_usage \
158 "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
159 #define fbsplash_full_usage "\n\n" \
162 "\n -c Hide cursor" \
163 "\n -d Framebuffer device (default /dev/fb0)" \
164 "\n -i Config file (var=value):" \
165 "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
166 "\n BAR_R,BAR_G,BAR_B" \
167 "\n -f Control pipe (else exit after drawing image)" \
168 "\n commands: 'NN' (% for progress bar) or 'exit'" \
170 #define brctl_trivial_usage \
171 "COMMAND [BRIDGE [INTERFACE]]"
172 #define brctl_full_usage "\n\n" \
173 "Manage ethernet bridges\n" \
175 IF_FEATURE_BRCTL_SHOW( \
176 "\n show Show a list of bridges" \
178 "\n addbr BRIDGE Create BRIDGE" \
179 "\n delbr BRIDGE Delete BRIDGE" \
180 "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \
181 "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \
182 IF_FEATURE_BRCTL_FANCY( \
183 "\n setageing BRIDGE TIME Set ageing time" \
184 "\n setfd BRIDGE TIME Set bridge forward delay" \
185 "\n sethello BRIDGE TIME Set hello time" \
186 "\n setmaxage BRIDGE TIME Set max message age" \
187 "\n setpathcost BRIDGE COST Set path cost" \
188 "\n setportprio BRIDGE PRIO Set port priority" \
189 "\n setbridgeprio BRIDGE PRIO Set bridge priority" \
190 "\n stp BRIDGE [1|0] STP on/off" \
193 #define bunzip2_trivial_usage \
194 "[OPTIONS] [FILE]..."
195 #define bunzip2_full_usage "\n\n" \
196 "Uncompress FILEs (or stdin)\n" \
198 "\n -c Write to stdout" \
201 #define bzip2_trivial_usage \
202 "[OPTIONS] [FILE]..."
203 #define bzip2_full_usage "\n\n" \
204 "Compress FILEs (or stdin) with bzip2 algorithm\n" \
206 "\n -c Write to stout" \
209 "\n -1..-9 Compression level" \
211 #define busybox_notes_usage \
214 #define lzop_trivial_usage \
215 "[-cfvd123456789CF] [FILE]..."
216 #define lzop_full_usage "\n\n" \
217 " -c Write to stdout" \
221 "\n -F Don't store or verify checksum" \
222 "\n -C Also write checksum of compressed block" \
223 "\n -1..9 Compression level" \
225 #define lzopcat_trivial_usage \
227 #define lzopcat_full_usage "\n\n" \
229 "\n -F Don't store or verify checksum" \
231 #define unlzop_trivial_usage \
233 #define unlzop_full_usage "\n\n" \
234 " -c Write to stdout" \
237 "\n -F Don't store or verify checksum" \
239 #define bzcat_trivial_usage \
241 #define bzcat_full_usage "\n\n" \
242 "Uncompress to stdout"
244 #define unlzma_trivial_usage \
245 "[OPTIONS] [FILE]..."
246 #define unlzma_full_usage "\n\n" \
247 "Uncompress FILE (or stdin)\n" \
249 "\n -c Write to stdout" \
252 #define lzmacat_trivial_usage \
254 #define lzmacat_full_usage "\n\n" \
255 "Uncompress to stdout"
257 #define cal_trivial_usage \
258 "[-jy] [[MONTH] YEAR]"
259 #define cal_full_usage "\n\n" \
260 "Display a calendar\n" \
262 "\n -j Use julian dates" \
263 "\n -y Display the entire year" \
265 #define cat_trivial_usage \
267 #define cat_full_usage "\n\n" \
268 "Concatenate FILEs and print them to stdout\n" \
270 "\n -u Use unbuffered i/o (ignored)" \
272 #define cat_example_usage \
273 "$ cat /proc/uptime\n" \
276 #define catv_trivial_usage \
278 #define catv_full_usage "\n\n" \
279 "Display nonprinting characters as ^x or M-x\n" \
281 "\n -e End each line with $" \
282 "\n -t Show tabs as ^I" \
283 "\n -v Don't use ^x or M-x escapes" \
285 #define chat_trivial_usage \
286 "EXPECT [SEND [EXPECT [SEND...]]]"
287 #define chat_full_usage "\n\n" \
288 "Useful for interacting with a modem connected to stdin/stdout.\n" \
289 "A script consists of one or more \"expect-send\" pairs of strings,\n" \
290 "each pair is a pair of arguments. Example:\n" \
291 "chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \
293 #define chattr_trivial_usage \
294 "[-R] [-+=AacDdijsStTu] [-v VERSION] [FILE]..."
295 #define chattr_full_usage "\n\n" \
296 "Change file attributes on an ext2 fs\n" \
298 "\n - Remove attributes" \
299 "\n + Add attributes" \
300 "\n = Set attributes" \
302 "\n A Don't track atime" \
303 "\n a Append mode only" \
304 "\n c Enable compress" \
305 "\n D Write dir contents synchronously" \
306 "\n d Don't backup with dump" \
307 "\n i Cannot be modified (immutable)" \
308 "\n j Write all data to journal first" \
309 "\n s Zero disk storage when deleted" \
310 "\n S Write file contents synchronously" \
311 "\n t Disable tail-merging of partial blocks with other files" \
312 "\n u Allow file to be undeleted" \
315 "\n -v Set the file's version/generation number" \
317 #define chcon_trivial_usage \
318 "[OPTIONS] CONTEXT FILE..." \
319 "\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \
320 IF_FEATURE_CHCON_LONG_OPTIONS( \
321 "\n chcon [OPTIONS] --reference=RFILE FILE..." \
323 #define chcon_full_usage "\n\n" \
324 "Change the security context of each FILE to CONTEXT\n" \
325 IF_FEATURE_CHCON_LONG_OPTIONS( \
326 "\n -v,--verbose Verbose" \
327 "\n -c,--changes Report changes made" \
328 "\n -h,--no-dereference Affect symlinks instead of their targets" \
329 "\n -f,--silent,--quiet Suppress most error messages" \
330 "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
331 "\n -u,--user=USER Set user/role/type/range in the target" \
332 "\n -r,--role=ROLE security context" \
333 "\n -t,--type=TYPE" \
334 "\n -l,--range=RANGE" \
335 "\n -R,--recursive Recurse" \
337 IF_NOT_FEATURE_CHCON_LONG_OPTIONS( \
339 "\n -c Report changes made" \
340 "\n -h Affect symlinks instead of their targets" \
341 "\n -f Suppress most error messages" \
342 "\n -u USER Set user/role/type/range in the target security context" \
349 #define chmod_trivial_usage \
350 "[-R"IF_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
351 #define chmod_full_usage "\n\n" \
352 "Each MODE is one or more of the letters ugoa, one of the\n" \
353 "symbols +-= and one or more of the letters rwxst\n" \
357 "\n -c List changed files" \
358 "\n -v List all files" \
359 "\n -f Hide errors" \
361 #define chmod_example_usage \
362 "$ ls -l /tmp/foo\n" \
363 "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
364 "$ chmod u+x /tmp/foo\n" \
365 "$ ls -l /tmp/foo\n" \
366 "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
367 "$ chmod 444 /tmp/foo\n" \
368 "$ ls -l /tmp/foo\n" \
369 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
371 #define chgrp_trivial_usage \
372 "[-RhLHP"IF_DESKTOP("cvf")"]... GROUP FILE..."
373 #define chgrp_full_usage "\n\n" \
374 "Change the group membership of each FILE to GROUP\n" \
377 "\n -h Affect symlinks instead of symlink targets" \
378 "\n -L Traverse all symlinks to directories" \
379 "\n -H Traverse symlinks on command line only" \
380 "\n -P Don't traverse symlinks (default)" \
382 "\n -c List changed files" \
384 "\n -f Hide errors" \
386 #define chgrp_example_usage \
387 "$ ls -l /tmp/foo\n" \
388 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
389 "$ chgrp root /tmp/foo\n" \
390 "$ ls -l /tmp/foo\n" \
391 "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
393 #define chown_trivial_usage \
394 "[-RhLHP"IF_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
395 #define chown_full_usage "\n\n" \
396 "Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \
399 "\n -h Affect symlinks instead of symlink targets" \
400 "\n -L Traverse all symlinks to directories" \
401 "\n -H Traverse symlinks on command line only" \
402 "\n -P Don't traverse symlinks (default)" \
404 "\n -c List changed files" \
405 "\n -v List all files" \
406 "\n -f Hide errors" \
408 #define chown_example_usage \
409 "$ ls -l /tmp/foo\n" \
410 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
411 "$ chown root /tmp/foo\n" \
412 "$ ls -l /tmp/foo\n" \
413 "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
414 "$ chown root.root /tmp/foo\n" \
416 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
418 #define chpst_trivial_usage \
419 "[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \
420 " [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \
421 " [-p N] [-f BYTES] [-c BYTES] PROG ARGS"
422 #define chpst_full_usage "\n\n" \
423 "Change the process state and run PROG\n" \
425 "\n -u USER[:GRP] Set uid and gid" \
426 "\n -U USER[:GRP] Set $UID and $GID in environment" \
427 "\n -e DIR Set environment variables as specified by files" \
428 "\n in DIR: file=1st_line_of_file" \
429 "\n -/ DIR Chroot to DIR" \
430 "\n -n NICE Add NICE to nice value" \
431 "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \
432 "\n -d BYTES Limit data segment" \
433 "\n -o N Limit number of open files per process" \
434 "\n -p N Limit number of processes per uid" \
435 "\n -f BYTES Limit output file sizes" \
436 "\n -c BYTES Limit core file size" \
438 "\n -P Create new process group" \
439 "\n -0 Close stdin" \
440 "\n -1 Close stdout" \
441 "\n -2 Close stderr" \
443 #define setuidgid_trivial_usage \
445 #define setuidgid_full_usage "\n\n" \
446 "Set uid and gid to USER's uid and gid, removing all supplementary\n" \
447 "groups and run PROG"
448 #define envuidgid_trivial_usage \
450 #define envuidgid_full_usage "\n\n" \
451 "Set $UID to USER's uid and $GID to USER's gid and run PROG"
452 #define envdir_trivial_usage \
454 #define envdir_full_usage "\n\n" \
455 "Set various environment variables as specified by files\n" \
456 "in the directory dir and run PROG"
457 #define softlimit_trivial_usage \
458 "[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \
459 " [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \
461 #define softlimit_full_usage "\n\n" \
462 "Set soft resource limits, then run PROG\n" \
464 "\n -a BYTES Limit total size of all segments" \
465 "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \
466 "\n -d BYTES Limit data segment" \
467 "\n -s BYTES Limit stack segment" \
468 "\n -l BYTES Limit locked memory size" \
469 "\n -o N Limit number of open files per process" \
470 "\n -p N Limit number of processes per uid" \
471 "\nOptions controlling file sizes:" \
472 "\n -f BYTES Limit output file sizes" \
473 "\n -c BYTES Limit core file size" \
474 "\nEfficiency opts:" \
475 "\n -r BYTES Limit resident set size" \
476 "\n -t N Limit CPU time, process receives" \
477 "\n a SIGXCPU after N seconds" \
479 #define chroot_trivial_usage \
480 "NEWROOT [PROG ARGS]"
481 #define chroot_full_usage "\n\n" \
482 "Run PROG with root directory set to NEWROOT"
483 #define chroot_example_usage \
484 "$ ls -l /bin/ls\n" \
485 "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
486 "# mount /dev/hdc1 /mnt -t minix\n" \
488 "# ls -l /bin/ls\n" \
489 "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
491 #define chvt_trivial_usage \
493 #define chvt_full_usage "\n\n" \
494 "Change the foreground virtual terminal to /dev/ttyN"
496 #define cksum_trivial_usage \
498 #define cksum_full_usage "\n\n" \
499 "Calculate the CRC32 checksums of FILES"
501 #define clear_trivial_usage \
503 #define clear_full_usage "\n\n" \
506 #define cmp_trivial_usage \
507 "[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]") "]]"
508 #define cmp_full_usage "\n\n" \
509 "Compares FILE1 vs stdin if FILE2 is not specified\n" \
511 "\n -l Write the byte numbers (decimal) and values (octal)" \
512 "\n for all differing bytes" \
515 #define comm_trivial_usage \
517 #define comm_full_usage "\n\n" \
518 "Compare FILE1 to FILE2, or to stdin if - is specified\n" \
520 "\n -1 Suppress lines unique to FILE1" \
521 "\n -2 Suppress lines unique to FILE2" \
522 "\n -3 Suppress lines common to both files" \
524 #define bbconfig_trivial_usage \
526 #define bbconfig_full_usage "\n\n" \
527 "Print the config file which built busybox"
529 #define chrt_trivial_usage \
530 "[OPTIONS] [PRIO] [PID | PROG ARGS]"
531 #define chrt_full_usage "\n\n" \
532 "Manipulate real-time attributes of a process\n" \
534 "\n -p Operate on PID" \
535 "\n -r Set SCHED_RR scheduling" \
536 "\n -f Set SCHED_FIFO scheduling" \
537 "\n -o Set SCHED_OTHER scheduling" \
538 "\n -m Show min and max priorities" \
540 #define chrt_example_usage \
541 "$ chrt -r 4 sleep 900; x=$!\n" \
542 "$ chrt -f -p 3 $x\n" \
543 "You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
545 #define cp_trivial_usage \
546 "[OPTIONS] SOURCE DEST"
547 #define cp_full_usage "\n\n" \
548 "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \
550 "\n -a Same as -dpR" \
552 "\n -c Preserve security context" \
555 "\n -d,-P Preserve symlinks (default if -R)" \
556 "\n -L Follow all symlinks" \
557 "\n -H Follow symlinks on command line" \
558 "\n -p Preserve file attributes if possible" \
559 "\n -f Force overwrite" \
560 "\n -i Prompt before overwrite" \
561 "\n -l,-s Create (sym)links" \
563 #define cpio_trivial_usage \
564 "[-dmvu] [-F FILE]" IF_FEATURE_CPIO_O(" [-H newc]") \
565 " [-ti"IF_FEATURE_CPIO_O("o")"]" IF_FEATURE_CPIO_P(" [-p DIR]")
566 #define cpio_full_usage "\n\n" \
567 "Extract or list files from a cpio archive" \
568 IF_FEATURE_CPIO_O(", or" \
569 "\ncreate an archive" IF_FEATURE_CPIO_P(" (-o) or copy files (-p)") \
570 " using file list on stdin" \
573 "\nMain operation mode:" \
577 "\n -o Create (requires -H newc)" \
580 "\n -p DIR Copy files to DIR" \
583 "\n -d Make leading directories" \
584 "\n -m Preserve mtime" \
587 "\n -F FILE Input (-t,-i,-p) or output (-o) file" \
589 "\n -H newc Archive format" \
592 #define crond_trivial_usage \
593 "-fbS -l N " IF_FEATURE_CROND_D("-d N ") "-L LOGFILE -c DIR"
594 #define crond_full_usage "\n\n" \
596 "\n -b Background (default)" \
597 "\n -S Log to syslog (default)" \
598 "\n -l Set log level. 0 is the most verbose, default 8" \
599 IF_FEATURE_CROND_D( \
600 "\n -d Set log level, log to stderr" \
602 "\n -L Log to file" \
603 "\n -c Working dir" \
605 #define crontab_trivial_usage \
606 "[-c DIR] [-u USER] [-ler]|[FILE]"
607 #define crontab_full_usage "\n\n" \
608 " -c Crontab directory" \
610 "\n -l List crontab" \
611 "\n -e Edit crontab" \
612 "\n -r Delete crontab" \
613 "\n FILE Replace crontab by FILE ('-': stdin)" \
615 #define cryptpw_trivial_usage \
616 "[OPTIONS] [PASSWORD] [SALT]"
617 /* We do support -s, we just don't mention it */
618 #define cryptpw_full_usage "\n\n" \
619 "Crypt the PASSWORD using crypt(3)\n" \
622 "\n -P,--password-fd=N Read password from fd N" \
623 /* "\n -s,--stdin Use stdin; like -P0" */ \
624 "\n -m,--method=TYPE Encryption method TYPE" \
625 "\n -S,--salt=SALT" \
628 "\n -P N Read password from fd N" \
629 /* "\n -s Use stdin; like -P0" */ \
630 "\n -m TYPE Encryption method TYPE" \
634 /* mkpasswd is an alias to cryptpw */
636 #define mkpasswd_trivial_usage \
637 "[OPTIONS] [PASSWORD] [SALT]"
638 /* We do support -s, we just don't mention it */
639 #define mkpasswd_full_usage "\n\n" \
640 "Crypt the PASSWORD using crypt(3)\n" \
643 "\n -P,--password-fd=N Read password from fd N" \
644 /* "\n -s,--stdin Use stdin; like -P0" */ \
645 "\n -m,--method=TYPE Encryption method TYPE" \
646 "\n -S,--salt=SALT" \
649 "\n -P N Read password from fd N" \
650 /* "\n -s Use stdin; like -P0" */ \
651 "\n -m TYPE Encryption method TYPE" \
655 #define cttyhack_trivial_usage NOUSAGE_STR
656 #define cttyhack_full_usage ""
658 #define cut_trivial_usage \
659 "[OPTIONS] [FILE]..."
660 #define cut_full_usage "\n\n" \
661 "Print selected fields from each input FILE to stdout\n" \
663 "\n -b LIST Output only bytes from LIST" \
664 "\n -c LIST Output only characters from LIST" \
665 "\n -d CHAR Use CHAR instead of tab as the field delimiter" \
666 "\n -s Output only the lines containing delimiter" \
667 "\n -f N Print only these fields" \
670 #define cut_example_usage \
671 "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
673 "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
676 #define date_trivial_usage \
677 "[OPTIONS] [+FMT] [TIME]"
678 #define date_full_usage "\n\n" \
679 "Display time (using +FMT), or set time\n" \
682 "\n [-s] TIME Set time to TIME" \
683 "\n -u Work in UTC (don't convert to local time)" \
684 "\n -R Output RFC-2822 compliant date string" \
686 "\n [-s,--set] TIME Set time to TIME" \
687 "\n -u,--utc Work in UTC (don't convert to local time)" \
688 "\n -R,--rfc-2822 Output RFC-2822 compliant date string" \
690 IF_FEATURE_DATE_ISOFMT( \
691 "\n -I[SPEC] Output ISO-8601 compliant date string" \
692 "\n SPEC='date' (default) for date only," \
693 "\n 'hours', 'minutes', or 'seconds' for date and" \
694 "\n time to the indicated precision" \
695 ) IF_NOT_LONG_OPTS( \
696 "\n -r FILE Display last modification time of FILE" \
697 "\n -d TIME Display TIME, not 'now'" \
699 "\n -r,--reference FILE Display last modification time of FILE" \
700 "\n -d,--date TIME Display TIME, not 'now'" \
702 IF_FEATURE_DATE_ISOFMT( \
703 "\n -D FMT Use FMT for -d TIME conversion" \
706 "\nRecognized TIME formats:" \
708 "\n [YYYY.]MM.DD-hh:mm[:ss]" \
709 "\n YYYY-MM-DD hh:mm[:ss]" \
710 "\n [[[[[YY]YY]MM]DD]hh]mm[.ss]" \
712 #define date_example_usage \
714 "Wed Apr 12 18:52:41 MDT 2000\n"
716 #define dc_trivial_usage \
718 #define dc_full_usage "\n\n" \
719 "Tiny RPN calculator. Operations:\n" \
720 "+, add, -, sub, *, mul, /, div, %, mod, **, exp, and, or, not, eor,\n" \
721 "p - print top of the stack (without altering the stack),\n" \
722 "f - print entire stack, o - pop the value and set output radix\n" \
723 "(value must be 10 or 16).\n" \
724 "Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16\n" \
726 #define dc_example_usage \
729 "$ dc 8 8 \\* 2 2 + / p\n" \
735 "$ echo 72 9 div 8 mul p | dc\n" \
738 #define dd_trivial_usage \
739 "[if=FILE] [of=FILE] " IF_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
740 " [seek=N]" IF_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync|fsync]")
741 #define dd_full_usage "\n\n" \
742 "Copy a file with converting and formatting\n" \
744 "\n if=FILE Read from FILE instead of stdin" \
745 "\n of=FILE Write to FILE instead of stdout" \
746 "\n bs=N Read and write N bytes at a time" \
747 IF_FEATURE_DD_IBS_OBS( \
748 "\n ibs=N Read N bytes at a time" \
750 IF_FEATURE_DD_IBS_OBS( \
751 "\n obs=N Write N bytes at a time" \
753 "\n count=N Copy only N input blocks" \
754 "\n skip=N Skip N input blocks" \
755 "\n seek=N Skip N output blocks" \
756 IF_FEATURE_DD_IBS_OBS( \
757 "\n conv=notrunc Don't truncate output file" \
758 "\n conv=noerror Continue after read errors" \
759 "\n conv=sync Pad blocks with zeros" \
760 "\n conv=fsync Physically write data out before finishing" \
763 "\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \
764 "\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \
766 #define dd_example_usage \
767 "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
771 #define deallocvt_trivial_usage \
773 #define deallocvt_full_usage "\n\n" \
774 "Deallocate unused virtual terminal /dev/ttyN"
776 #define delgroup_trivial_usage \
777 IF_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
778 #define delgroup_full_usage "\n\n" \
779 "Delete group GROUP from the system" \
780 IF_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
782 #define deluser_trivial_usage \
784 #define deluser_full_usage "\n\n" \
785 "Delete USER from the system"
787 #define depmod_trivial_usage NOUSAGE_STR
788 #define depmod_full_usage ""
790 #define devmem_trivial_usage \
791 "ADDRESS [WIDTH [VALUE]]"
793 #define devmem_full_usage "\n\n" \
794 "Read/write from physical address\n" \
795 "\n ADDRESS Address to act upon" \
796 "\n WIDTH Width (8/16/...)" \
797 "\n VALUE Data to be written" \
799 #define devfsd_trivial_usage \
800 "mntpnt [-v]" IF_DEVFSD_FG_NP("[-fg][-np]")
801 #define devfsd_full_usage "\n\n" \
802 "Manage devfs permissions and old device name symlinks\n" \
804 "\n mntpnt The mount point where devfs is mounted" \
805 "\n -v Print the protocol version numbers for devfsd" \
806 "\n and the kernel-side protocol version and exit" \
808 "\n -fg Run in foreground" \
809 "\n -np Exit after parsing the configuration file" \
810 "\n and processing synthetic REGISTER events," \
811 "\n don't poll for events" \
814 #define df_trivial_usage \
816 IF_FEATURE_HUMAN_READABLE("mh") \
817 IF_FEATURE_DF_FANCY("ai] [-B SIZE") \
819 #define df_full_usage "\n\n" \
820 "Print filesystem usage statistics\n" \
822 "\n -P POSIX output format" \
823 "\n -k 1024-byte blocks (default)" \
824 IF_FEATURE_HUMAN_READABLE( \
825 "\n -m 1M-byte blocks" \
826 "\n -h Human readable (e.g. 1K 243M 2G)" \
828 IF_FEATURE_DF_FANCY( \
829 "\n -a Show all filesystems" \
831 "\n -B SIZE Blocksize" \
834 #define df_example_usage \
836 "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
837 "/dev/sda3 8690864 8553540 137324 98% /\n" \
838 "/dev/sda1 64216 36364 27852 57% /boot\n" \
840 "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
841 "/dev/sda3 8690864 8553540 137324 98% /\n" \
842 "$ POSIXLY_CORRECT=sure df /dev/sda3\n" \
843 "Filesystem 512B-blocks Used Available Use% Mounted on\n" \
844 "/dev/sda3 17381728 17107080 274648 98% /\n" \
845 "$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" \
846 "Filesystem 512-blocks Used Available Capacity Mounted on\n" \
847 "/dev/sda3 17381728 17107080 274648 98% /\n"
849 #define dhcprelay_trivial_usage \
850 "CLIENT_IFACE[,CLIENT_IFACE2]... SERVER_IFACE [SERVER_IP]"
851 #define dhcprelay_full_usage "\n\n" \
852 "Relay DHCP requests between clients and server" \
854 #define diff_trivial_usage \
855 "[-abBdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
856 #define diff_full_usage "\n\n" \
857 "Compare files line by line and output the differences between them.\n" \
858 "This implementation supports unified diffs only.\n" \
860 "\n -a Treat all files as text" \
861 "\n -b Ignore changes in the amount of whitespace" \
862 "\n -B Ignore changes whose lines are all blank" \
863 "\n -d Try hard to find a smaller set of changes" \
864 "\n -i Ignore case differences" \
865 "\n -L Use LABEL instead of the filename in the unified header" \
866 "\n -N Treat absent files as empty" \
867 "\n -q Output only whether files differ" \
869 "\n -S Start with FILE when comparing directories" \
870 "\n -T Make tabs line up by prefixing a tab when necessary" \
871 "\n -s Report when two files are the same" \
872 "\n -t Expand tabs to spaces in output" \
873 "\n -U Output LINES lines of context" \
874 "\n -w Ignore all whitespace" \
876 #define dirname_trivial_usage \
878 #define dirname_full_usage "\n\n" \
879 "Strip non-directory suffix from FILENAME"
880 #define dirname_example_usage \
881 "$ dirname /tmp/foo\n" \
883 "$ dirname /tmp/foo/\n" \
886 #define dmesg_trivial_usage \
887 "[-c] [-n LEVEL] [-s SIZE]"
888 #define dmesg_full_usage "\n\n" \
889 "Print or control the kernel ring buffer\n" \
891 "\n -c Clear ring buffer after printing" \
892 "\n -n LEVEL Set console logging level" \
893 "\n -s SIZE Buffer size" \
895 #define dnsd_trivial_usage \
896 "[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]"
897 #define dnsd_full_usage "\n\n" \
898 "Small static DNS server daemon\n" \
900 "\n -c FILE Config file" \
902 "\n -p PORT Listen on PORT" \
903 "\n -i ADDR Listen on ADDR" \
906 "\n -s Send successful replies only. Use this if you want" \
907 "\n to use /etc/resolv.conf with two nameserver lines:" \
908 "\n nameserver DNSD_SERVER" \
909 "\n nameserver NORNAL_DNS_SERVER" \
911 #define dos2unix_trivial_usage \
913 #define dos2unix_full_usage "\n\n" \
914 "Convert FILE in-place from DOS to Unix format.\n" \
915 "When no file is given, use stdin/stdout.\n" \
920 #define unix2dos_trivial_usage \
922 #define unix2dos_full_usage "\n\n" \
923 "Convert FILE in-place from Unix to DOS format.\n" \
924 "When no file is given, use stdin/stdout.\n" \
929 #define dpkg_trivial_usage \
930 "[-ilCPru] [-F OPT] PACKAGE"
931 #define dpkg_full_usage "\n\n" \
932 "Install, remove and manage Debian packages\n" \
934 "\n -i Install the package" \
935 "\n -l List of installed packages" \
936 "\n -C Configure an unpackaged package" \
937 "\n -F depends Ignore dependency problems" \
938 "\n -P Purge all files of a package" \
939 "\n -r Remove all but the configuration files for a package" \
940 "\n -u Unpack a package, but don't configure it" \
942 #define dpkg_deb_trivial_usage \
943 "[-cefxX] FILE [argument]"
944 #define dpkg_deb_full_usage "\n\n" \
945 "Perform actions on Debian packages (.debs)\n" \
947 "\n -c List contents of filesystem tree" \
948 "\n -e Extract control files to [argument] directory" \
949 "\n -f Display control field name starting with [argument]" \
950 "\n -x Extract packages filesystem tree to directory" \
951 "\n -X Verbose extract" \
953 #define dpkg_deb_example_usage \
954 "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
956 #define du_trivial_usage \
957 "[-aHLdclsx" IF_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
958 #define du_full_usage "\n\n" \
959 "Summarize disk space used for each FILE and/or directory.\n" \
960 "Disk space is printed in units of " \
961 IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
962 IF_NOT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
965 "\n -a Show file sizes too" \
966 "\n -L Follow all symlinks" \
967 "\n -H Follow symlinks on command line" \
968 "\n -d N Limit output to directories (and files with -a) of depth < N" \
969 "\n -c Show grand total" \
970 "\n -l Count sizes many times if hard linked" \
971 "\n -s Display only a total for each argument" \
972 "\n -x Skip directories on different filesystems" \
973 IF_FEATURE_HUMAN_READABLE( \
974 "\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \
975 "\n -m Sizes in megabytes" \
977 "\n -k Sizes in kilobytes" \
978 IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \
980 #define du_example_usage \
983 "12 ./kernel-patches/CVS\n" \
984 "80 ./kernel-patches\n" \
987 "12 ./scripts/CVS\n" \
993 #define dumpkmap_trivial_usage \
995 #define dumpkmap_full_usage "\n\n" \
996 "Print a binary keyboard translation table to stdout"
997 #define dumpkmap_example_usage \
998 "$ dumpkmap > keymap\n"
1000 #define dumpleases_trivial_usage \
1001 "[-r|-a] [-f LEASEFILE]"
1002 #define dumpleases_full_usage "\n\n" \
1003 "Display DHCP leases granted by udhcpd\n" \
1006 "\n -f,--file=FILE Leases file to load" \
1007 "\n -r,--remaining Interpret lease times as time remaining" \
1008 "\n -a,--absolute Interpret lease times as expire time" \
1011 "\n -f FILE Leases file to load" \
1012 "\n -r Interpret lease times as time remaining" \
1013 "\n -a Interpret lease times as expire time" \
1017 #define e2fsck_trivial_usage \
1018 "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
1019 "[-I inode_buffer_blocks] [-P process_inode_size] " \
1020 "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
1021 "[-E extended-options] device"
1022 #define e2fsck_full_usage "\n\n" \
1023 "Check ext2/ext3 file system\n" \
1025 "\n -p Automatic repair (no questions)" \
1026 "\n -n Make no changes to the filesystem" \
1027 "\n -y Assume 'yes' to all questions" \
1028 "\n -c Check for bad blocks and add them to the badblock list" \
1029 "\n -f Force checking even if filesystem is marked clean" \
1031 "\n -b superblock Use alternative superblock" \
1032 "\n -B blocksize Force blocksize when looking for superblock" \
1033 "\n -j journal Set location of the external journal" \
1034 "\n -l file Add to badblocks list" \
1035 "\n -L file Set badblocks list" \
1038 #define echo_trivial_usage \
1039 IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG]..."
1040 #define echo_full_usage "\n\n" \
1041 "Print the specified ARGs to stdout" \
1042 IF_FEATURE_FANCY_ECHO( "\n" \
1044 "\n -n Suppress trailing newline" \
1045 "\n -e Interpret backslash-escaped characters (i.e., \\t=tab)" \
1046 "\n -E Disable interpretation of backslash-escaped characters" \
1048 #define echo_example_usage \
1049 "$ echo \"Erik is cool\"\n" \
1051 IF_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
1055 "$ echo \"Erik\\nis\\ncool\"\n" \
1056 "Erik\\nis\\ncool\n")
1058 #define eject_trivial_usage \
1059 "[-t] [-T] [DEVICE]"
1060 #define eject_full_usage "\n\n" \
1061 "Eject DEVICE or default /dev/cdrom\n" \
1063 IF_FEATURE_EJECT_SCSI( \
1064 "\n -s SCSI device" \
1066 "\n -t Close tray" \
1067 "\n -T Open/close tray (toggle)" \
1069 #define ed_trivial_usage ""
1070 #define ed_full_usage ""
1072 #define env_trivial_usage \
1073 "[-iu] [-] [name=value]... [PROG ARGS]"
1074 #define env_full_usage "\n\n" \
1075 "Print the current environment or run PROG after setting up\n" \
1076 "the specified environment\n" \
1078 "\n -, -i Start with an empty environment" \
1079 "\n -u Remove variable from the environment" \
1081 #define ether_wake_trivial_usage \
1082 "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
1083 #define ether_wake_full_usage "\n\n" \
1084 "Send a magic packet to wake up sleeping machines.\n" \
1085 "MAC must be a station address (00:11:22:33:44:55) or\n" \
1086 "a hostname with a known 'ethers' entry.\n" \
1088 "\n -b Send wake-up packet to the broadcast address" \
1089 "\n -i iface Interface to use (default eth0)" \
1090 "\n -p pass Append four or six byte password PW to the packet" \
1092 #define expand_trivial_usage \
1093 "[-i] [-t N] [FILE|-]"
1094 #define expand_full_usage "\n\n" \
1095 "Convert tabs to spaces, writing to stdout\n" \
1097 IF_FEATURE_EXPAND_LONG_OPTIONS( \
1098 "\n -i,--initial Don't convert tabs after non blanks" \
1099 "\n -t,--tabs=N Tabstops every N chars" \
1101 IF_NOT_FEATURE_EXPAND_LONG_OPTIONS( \
1102 "\n -i Don't convert tabs after non blanks" \
1103 "\n -t Tabstops every N chars" \
1106 #define expr_trivial_usage \
1108 #define expr_full_usage "\n\n" \
1109 "Print the value of EXPRESSION to stdout\n" \
1111 "EXPRESSION may be:\n" \
1112 " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
1113 " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
1114 " ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \
1120 " ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \
1125 " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
1126 " match STRING REGEXP Same as STRING : REGEXP\n" \
1127 " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
1128 " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
1129 " length STRING Length of STRING\n" \
1130 " quote TOKEN Interpret TOKEN as a string, even if\n" \
1131 " it is a keyword like 'match' or an\n" \
1132 " operator like '/'\n" \
1133 " (EXPRESSION) Value of EXPRESSION\n" \
1135 "Beware that many operators need to be escaped or quoted for shells.\n" \
1136 "Comparisons are arithmetic if both ARGs are numbers, else\n" \
1137 "lexicographical. Pattern matches return the string matched between\n" \
1138 "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
1139 "of characters matched or 0."
1141 #define fakeidentd_trivial_usage \
1142 "[-fiw] [-b ADDR] [STRING]"
1143 #define fakeidentd_full_usage "\n\n" \
1144 "Provide fake ident (auth) service\n" \
1146 "\n -f Run in foreground" \
1147 "\n -i Inetd mode" \
1148 "\n -w Inetd 'wait' mode" \
1149 "\n -b ADDR Bind to specified address" \
1150 "\n STRING Ident answer string (default: nobody)" \
1152 #define false_trivial_usage \
1154 #define false_full_usage "\n\n" \
1155 "Return an exit code of FALSE (1)"
1157 #define false_example_usage \
1162 #define fbset_trivial_usage \
1164 #define fbset_full_usage "\n\n" \
1165 "Show and modify frame buffer settings"
1167 #define fbset_example_usage \
1169 "mode \"1024x768-76\"\n" \
1170 " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
1171 " geometry 1024 768 1024 768 16\n" \
1172 " timings 12714 128 32 16 4 128 4\n" \
1174 " rgba 5/11,6/5,5/0,0/0\n" \
1177 #define fdflush_trivial_usage \
1179 #define fdflush_full_usage "\n\n" \
1180 "Force floppy disk drive to detect disk change"
1182 #define fdformat_trivial_usage \
1184 #define fdformat_full_usage "\n\n" \
1185 "Format floppy disk\n" \
1187 "\n -n Don't verify after format" \
1189 /* Looks like someone forgot to add this to config system */
1190 #ifndef ENABLE_FEATURE_FDISK_BLKSIZE
1191 # define ENABLE_FEATURE_FDISK_BLKSIZE 0
1192 # define IF_FEATURE_FDISK_BLKSIZE(a)
1195 #define fdisk_trivial_usage \
1196 "[-ul" IF_FEATURE_FDISK_BLKSIZE("s") "] " \
1197 "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
1198 #define fdisk_full_usage "\n\n" \
1199 "Change partition table\n" \
1201 "\n -u Start and End are in sectors (instead of cylinders)" \
1202 "\n -l Show partition table for each DISK, then exit" \
1203 IF_FEATURE_FDISK_BLKSIZE( \
1204 "\n -s Show partition sizes in kb for each DISK, then exit" \
1206 "\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
1207 "\n -C CYLINDERS Set number of cylinders/heads/sectors" \
1211 #define blkid_trivial_usage \
1213 #define blkid_full_usage "\n\n" \
1214 "Print UUIDs of all filesystems"
1216 #define findfs_trivial_usage \
1217 "LABEL=label or UUID=uuid"
1218 #define findfs_full_usage "\n\n" \
1219 "Find a filesystem device based on a label or UUID"
1220 #define findfs_example_usage \
1221 "$ findfs LABEL=MyDevice"
1223 #define find_trivial_usage \
1224 "[PATH]... [EXPRESSION]"
1225 #define find_full_usage "\n\n" \
1226 "Search for files. The default PATH is the current directory,\n" \
1227 "default EXPRESSION is '-print'\n" \
1228 "\nEXPRESSION may consist of:" \
1229 "\n -follow Follow symlinks" \
1230 IF_FEATURE_FIND_XDEV( \
1231 "\n -xdev Don't descend directories on other filesystems") \
1232 IF_FEATURE_FIND_MAXDEPTH( \
1233 "\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \
1234 "\n tests/actions to command line arguments only") \
1235 "\n -mindepth N Don't act on first N levels" \
1236 "\n -name PATTERN File name (w/o directory name) matches PATTERN" \
1237 "\n -iname PATTERN Case insensitive -name" \
1238 IF_FEATURE_FIND_PATH( \
1239 "\n -path PATTERN Path matches PATTERN") \
1240 IF_FEATURE_FIND_REGEX( \
1241 "\n -regex PATTERN Path matches regex PATTERN") \
1242 IF_FEATURE_FIND_TYPE( \
1243 "\n -type X File type is X (X is one of: f,d,l,b,c,...)") \
1244 IF_FEATURE_FIND_PERM( \
1245 "\n -perm NNN Permissions match any of (+NNN), all of (-NNN)," \
1246 "\n or exactly NNN") \
1247 IF_FEATURE_FIND_MTIME( \
1248 "\n -mtime DAYS Modified time is greater than (+N), less than (-N)," \
1249 "\n or exactly N days") \
1250 IF_FEATURE_FIND_MMIN( \
1251 "\n -mmin MINS Modified time is greater than (+N), less than (-N)," \
1252 "\n or exactly N minutes") \
1253 IF_FEATURE_FIND_NEWER( \
1254 "\n -newer FILE Modified time is more recent than FILE's") \
1255 IF_FEATURE_FIND_INUM( \
1256 "\n -inum N File has inode number N") \
1257 IF_FEATURE_FIND_USER( \
1258 "\n -user NAME File is owned by user NAME (numeric user ID allowed)") \
1259 IF_FEATURE_FIND_GROUP( \
1260 "\n -group NAME File belongs to group NAME (numeric group ID allowed)") \
1261 IF_FEATURE_FIND_DEPTH( \
1262 "\n -depth Process directory name after traversing it") \
1263 IF_FEATURE_FIND_SIZE( \
1264 "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))" \
1265 "\n +/-N: file size is bigger/smaller than N") \
1266 IF_FEATURE_FIND_LINKS( \
1267 "\n -links N Number of links is greater than (+N), less than (-N)," \
1268 "\n or exactly N") \
1269 "\n -print Print (default and assumed)" \
1270 IF_FEATURE_FIND_PRINT0( \
1271 "\n -print0 Delimit output with null characters rather than" \
1273 IF_FEATURE_FIND_CONTEXT ( \
1274 "\n -context File has specified security context") \
1275 IF_FEATURE_FIND_EXEC( \
1276 "\n -exec CMD ARG ; Run CMD with all instances of {} replaced by the" \
1277 "\n matching files") \
1278 IF_FEATURE_FIND_PRUNE( \
1279 "\n -prune Stop traversing current subtree") \
1280 IF_FEATURE_FIND_DELETE( \
1281 "\n -delete Delete files, turns on -depth option") \
1282 IF_FEATURE_FIND_PAREN( \
1283 "\n (EXPR) Group an expression") \
1285 #define find_example_usage \
1286 "$ find / -name passwd\n" \
1289 #define flash_lock_trivial_usage \
1290 "MTD_DEVICE OFFSET SECTORS"
1291 #define flash_lock_full_usage "\n\n" \
1292 "Lock part or all of an MTD device. If SECTORS is -1, then all sectors\n" \
1293 "will be locked, regardless of the value of OFFSET"
1295 #define flash_unlock_trivial_usage \
1297 #define flash_unlock_full_usage "\n\n" \
1298 "Unlock an MTD device"
1300 #define flash_eraseall_trivial_usage \
1302 #define flash_eraseall_full_usage "\n\n" \
1303 "Erase an MTD device\n" \
1305 "\n -j Format the device for jffs2" \
1306 "\n -q Don't display progress messages" \
1308 #define flashcp_trivial_usage \
1309 "-v FILE MTD_DEVICE"
1310 #define flashcp_full_usage "\n\n" \
1311 "Copy an image to MTD device\n" \
1315 #define fold_trivial_usage \
1316 "[-bs] [-w WIDTH] [FILE]..."
1317 #define fold_full_usage "\n\n" \
1318 "Wrap input lines in each FILE (or stdin), writing to stdout\n" \
1320 "\n -b Count bytes rather than columns" \
1321 "\n -s Break at spaces" \
1322 "\n -w Use WIDTH columns instead of 80" \
1324 #define free_trivial_usage \
1326 #define free_full_usage "\n\n" \
1327 "Display the amount of free and used system memory"
1328 #define free_example_usage \
1330 " total used free shared buffers\n" \
1331 " Mem: 257628 248724 8904 59644 93124\n" \
1332 " Swap: 128516 8404 120112\n" \
1333 "Total: 386144 257128 129016\n" \
1335 #define freeramdisk_trivial_usage \
1337 #define freeramdisk_full_usage "\n\n" \
1338 "Free all memory used by the specified ramdisk"
1339 #define freeramdisk_example_usage \
1340 "$ freeramdisk /dev/ram2\n"
1342 #define fsck_trivial_usage \
1343 "[-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]..."
1344 #define fsck_full_usage "\n\n" \
1345 "Check and repair filesystems\n" \
1347 "\n -A Walk /etc/fstab and check all filesystems" \
1348 "\n -N Don't execute, just show what would be done" \
1349 "\n -P With -A, check filesystems in parallel" \
1350 "\n -R With -A, skip the root filesystem" \
1351 "\n -T Don't show title on startup" \
1353 "\n -C n Write status information to specified filedescriptor" \
1354 "\n -t TYPE List of filesystem types to check" \
1356 #define fsck_minix_trivial_usage \
1357 "[-larvsmf] BLOCKDEV"
1358 #define fsck_minix_full_usage "\n\n" \
1359 "Check MINIX filesystem\n" \
1361 "\n -l List all filenames" \
1362 "\n -r Perform interactive repairs" \
1363 "\n -a Perform automatic repairs" \
1365 "\n -s Output superblock information" \
1366 "\n -m Show \"mode not cleared\" warnings" \
1367 "\n -f Force file system check" \
1369 #define ftpd_trivial_usage \
1370 "[-wvS] [-t N] [-T N] [DIR]"
1371 #define ftpd_full_usage "\n\n" \
1372 "Anonymous FTP server\n" \
1374 "ftpd should be used as an inetd service.\n" \
1375 "ftpd's line for inetd.conf:\n" \
1376 " 21 stream tcp nowait root ftpd ftpd /files/to/serve\n" \
1377 "It also can be ran from tcpsvd:\n" \
1378 " tcpsvd -vE 0.0.0.0 21 ftpd /files/to/serve\n" \
1380 "\n -w Allow upload" \
1381 "\n -v Log to stderr" \
1382 "\n -S Log to syslog" \
1383 "\n -t,-T Idle and absolute timeouts" \
1384 "\n DIR Change root to this directory" \
1386 #define ftpget_trivial_usage \
1387 "[OPTIONS] HOST [LOCAL_FILE] REMOTE_FILE"
1388 #define ftpget_full_usage "\n\n" \
1389 "Retrieve a remote file via FTP\n" \
1391 IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1392 "\n -c,--continue Continue previous transfer" \
1393 "\n -v,--verbose Verbose" \
1394 "\n -u,--username Username" \
1395 "\n -p,--password Password" \
1396 "\n -P,--port Port number" \
1398 IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1399 "\n -c Continue previous transfer" \
1403 "\n -P Port number" \
1406 #define ftpput_trivial_usage \
1407 "[OPTIONS] HOST [REMOTE_FILE] LOCAL_FILE"
1408 #define ftpput_full_usage "\n\n" \
1409 "Store a local file on a remote machine via FTP\n" \
1411 IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1412 "\n -v,--verbose Verbose" \
1413 "\n -u,--username Username" \
1414 "\n -p,--password Password" \
1415 "\n -P,--port Port number" \
1417 IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1421 "\n -P Port number" \
1424 #define fuser_trivial_usage \
1425 "[OPTIONS] FILE or PORT/PROTO"
1426 #define fuser_full_usage "\n\n" \
1427 "Find processes which use FILEs or PORTs\n" \
1429 "\n -m Find processes which use same fs as FILEs" \
1430 "\n -4 Search only IPv4 space" \
1431 "\n -6 Search only IPv6 space" \
1432 "\n -s Silent: just exit with 0 if any processes are found" \
1433 "\n -k Kill found processes (otherwise display PIDs)" \
1434 "\n -SIGNAL Signal to send (default: TERM)" \
1436 #define getenforce_trivial_usage NOUSAGE_STR
1437 #define getenforce_full_usage ""
1439 #define getopt_trivial_usage \
1441 #define getopt_full_usage "\n\n" \
1444 "\n -a,--alternative Allow long options starting with single -" \
1445 "\n -l,--longoptions=longopts Long options to be recognized" \
1446 "\n -n,--name=progname The name under which errors are reported" \
1447 "\n -o,--options=optstring Short options to be recognized" \
1448 "\n -q,--quiet Disable error reporting by getopt(3)" \
1449 "\n -Q,--quiet-output No normal output" \
1450 "\n -s,--shell=shell Set shell quoting conventions" \
1451 "\n -T,--test Test for getopt(1) version" \
1452 "\n -u,--unquoted Don't quote the output" \
1455 "\n -a Allow long options starting with single -" \
1456 "\n -l longopts Long options to be recognized" \
1457 "\n -n progname The name under which errors are reported" \
1458 "\n -o optstring Short options to be recognized" \
1459 "\n -q Disable error reporting by getopt(3)" \
1460 "\n -Q No normal output" \
1461 "\n -s shell Set shell quoting conventions" \
1462 "\n -T Test for getopt(1) version" \
1463 "\n -u Don't quote the output" \
1465 #define getopt_example_usage \
1466 "$ cat getopt.test\n" \
1468 "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
1469 " -n 'example.busybox' -- \"$@\"`\n" \
1470 "if [ $? != 0 ]; then exit 1; fi\n" \
1471 "eval set -- \"$GETOPT\"\n" \
1472 "while true; do\n" \
1474 " -a|--a-long) echo \"Option a\"; shift;;\n" \
1475 " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \
1477 " case \"$2\" in\n" \
1478 " \"\") echo \"Option c, no argument\"; shift 2;;\n" \
1479 " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \
1481 " --) shift; break;;\n" \
1482 " *) echo \"Internal error!\"; exit 1;;\n" \
1486 #define getsebool_trivial_usage \
1487 "-a or getsebool boolean..."
1488 #define getsebool_full_usage "\n\n" \
1489 " -a Show all SELinux booleans"
1491 #define getty_trivial_usage \
1492 "[OPTIONS] BAUD_RATE TTY [TERMTYPE]"
1493 #define getty_full_usage "\n\n" \
1494 "Open a tty, prompt for a login name, then invoke /bin/login\n" \
1496 "\n -h Enable hardware (RTS/CTS) flow control" \
1497 "\n -i Don't display /etc/issue before running login" \
1498 "\n -L Local line, don't do carrier detect" \
1499 "\n -m Get baud rate from modem's CONNECT status message" \
1500 "\n -w Wait for a CR or LF before sending /etc/issue" \
1501 "\n -n Don't prompt the user for a login name" \
1502 "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
1503 "\n -l LOGIN Invoke LOGIN instead of /bin/login" \
1504 "\n -t SEC Terminate after SEC if no username is read" \
1505 "\n -I INITSTR Send INITSTR before anything else" \
1506 "\n -H HOST Log HOST into the utmp file as the hostname" \
1508 #define grep_trivial_usage \
1512 IF_FEATURE_GREP_EGREP_ALIAS("E") \
1513 IF_EXTRA_COMPAT("z") \
1515 IF_FEATURE_GREP_CONTEXT("[-A/B/C N] ") \
1516 "PATTERN/-e PATTERN.../-f FILE [FILE]..."
1517 #define grep_full_usage "\n\n" \
1518 "Search for PATTERN in FILEs (or stdin)\n" \
1520 "\n -H Add 'filename:' prefix" \
1521 "\n -h Do not add 'filename:' prefix" \
1522 "\n -n Add 'line_no:' prefix" \
1523 "\n -l Show only names of files that match" \
1524 "\n -L Show only names of files that don't match" \
1525 "\n -c Show only count of matching lines" \
1526 "\n -o Show only the matching part of line" \
1527 "\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \
1528 "\n -v Select non-matching lines" \
1529 "\n -s Suppress open and read errors" \
1531 "\n -i Ignore case" \
1533 "\n -w Match whole words only" \
1535 "\n -F PATTERN is a literal (not regexp)" \
1536 IF_FEATURE_GREP_EGREP_ALIAS( \
1537 "\n -E PATTERN is an extended regexp" \
1540 "\n -z Input is NUL terminated" \
1542 "\n -m N Match up to N times per file" \
1543 IF_FEATURE_GREP_CONTEXT( \
1544 "\n -A N Print N lines of trailing context" \
1545 "\n -B N Print N lines of leading context" \
1546 "\n -C N Same as '-A N -B N'" \
1548 "\n -e PTRN Pattern to match" \
1549 "\n -f FILE Read pattern from file" \
1551 #define grep_example_usage \
1552 "$ grep root /etc/passwd\n" \
1553 "root:x:0:0:root:/root:/bin/bash\n" \
1554 "$ grep ^[rR]oo. /etc/passwd\n" \
1555 "root:x:0:0:root:/root:/bin/bash\n"
1557 #define egrep_trivial_usage NOUSAGE_STR
1558 #define egrep_full_usage ""
1560 #define fgrep_trivial_usage NOUSAGE_STR
1561 #define fgrep_full_usage ""
1563 #define gunzip_trivial_usage \
1564 "[OPTIONS] [FILE]..."
1565 #define gunzip_full_usage "\n\n" \
1566 "Uncompress FILEs (or stdin)\n" \
1568 "\n -c Write to stdout" \
1570 "\n -t Test file integrity" \
1572 #define gunzip_example_usage \
1573 "$ ls -la /tmp/BusyBox*\n" \
1574 "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
1575 "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
1576 "$ ls -la /tmp/BusyBox*\n" \
1577 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
1579 #define gzip_trivial_usage \
1580 "[OPTIONS] [FILE]..."
1581 #define gzip_full_usage "\n\n" \
1582 "Compress FILEs (or stdin)\n" \
1584 "\n -c Write to stdout" \
1585 "\n -d Decompress" \
1588 #define gzip_example_usage \
1589 "$ ls -la /tmp/busybox*\n" \
1590 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
1591 "$ gzip /tmp/busybox.tar\n" \
1592 "$ ls -la /tmp/busybox*\n" \
1593 "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
1595 #define halt_trivial_usage \
1596 "[-d DELAY] [-n] [-f]" IF_FEATURE_WTMP(" [-w]")
1597 #define halt_full_usage "\n\n" \
1598 "Halt the system\n" \
1600 "\n -d Delay interval for halting" \
1601 "\n -n No call to sync()" \
1602 "\n -f Force halt (don't go through init)" \
1604 "\n -w Only write a wtmp record" \
1607 #define hdparm_trivial_usage \
1608 "[OPTIONS] [DEVICE]"
1609 #define hdparm_full_usage "\n\n" \
1611 "\n -a Get/set fs readahead" \
1612 "\n -A Set drive read-lookahead flag (0/1)" \
1613 "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \
1614 "\n -B Set Advanced Power Management setting (1-255)" \
1615 "\n -c Get/set IDE 32-bit IO setting" \
1616 "\n -C Check IDE power mode status" \
1617 IF_FEATURE_HDPARM_HDIO_GETSET_DMA( \
1618 "\n -d Get/set using_dma flag") \
1619 "\n -D Enable/disable drive defect-mgmt" \
1620 "\n -f Flush buffer cache for device on exit" \
1621 "\n -g Display drive geometry" \
1622 "\n -h Display terse usage information" \
1623 IF_FEATURE_HDPARM_GET_IDENTITY( \
1624 "\n -i Display drive identification") \
1625 IF_FEATURE_HDPARM_GET_IDENTITY( \
1626 "\n -I Detailed/current information directly from drive") \
1627 "\n -k Get/set keep_settings_over_reset flag (0/1)" \
1628 "\n -K Set drive keep_features_over_reset flag (0/1)" \
1629 "\n -L Set drive doorlock (0/1) (removable harddisks only)" \
1630 "\n -m Get/set multiple sector count" \
1631 "\n -n Get/set ignore-write-errors flag (0/1)" \
1632 "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \
1633 "\n -P Set drive prefetch count" \
1634 /* "\n -q Change next setting quietly" - not supported ib bbox */ \
1635 "\n -Q Get/set DMA tagged-queuing depth (if supported)" \
1636 "\n -r Get/set readonly flag (DANGEROUS to set)" \
1637 IF_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
1638 "\n -R Register an IDE interface (DANGEROUS)") \
1639 "\n -S Set standby (spindown) timeout" \
1640 "\n -t Perform device read timings" \
1641 "\n -T Perform cache read timings" \
1642 "\n -u Get/set unmaskirq flag (0/1)" \
1643 IF_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
1644 "\n -U Unregister an IDE interface (DANGEROUS)") \
1645 "\n -v Defaults; same as -mcudkrag for IDE drives" \
1646 "\n -V Display program version and exit immediately" \
1647 IF_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
1648 "\n -w Perform device reset (DANGEROUS)") \
1649 "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \
1650 IF_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
1651 "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \
1652 "\n -X Set IDE xfer mode (DANGEROUS)" \
1653 "\n -y Put IDE drive in standby mode" \
1654 "\n -Y Put IDE drive to sleep" \
1655 "\n -Z Disable Seagate auto-powersaving mode" \
1656 "\n -z Reread partition table" \
1658 #define head_trivial_usage \
1659 "[OPTIONS] [FILE]..."
1660 #define head_full_usage "\n\n" \
1661 "Print first 10 lines of each FILE (or stdin) to stdout.\n" \
1662 "With more than one FILE, precede each with a header giving the file name.\n" \
1664 "\n -n N Print first N lines instead of first 10" \
1665 IF_FEATURE_FANCY_HEAD( \
1666 "\n -c N Output the first N bytes" \
1667 "\n -q Never output headers giving file names" \
1668 "\n -v Always output headers giving file names") \
1670 #define head_example_usage \
1671 "$ head -n 2 /etc/passwd\n" \
1672 "root:x:0:0:root:/root:/bin/bash\n" \
1673 "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
1675 #define hexdump_trivial_usage \
1676 "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..."
1677 #define hexdump_full_usage "\n\n" \
1678 "Display FILEs (or stdin) in a user specified format\n" \
1680 "\n -b One-byte octal display" \
1681 "\n -c One-byte character display" \
1682 "\n -C Canonical hex+ASCII, 16 bytes per line" \
1683 "\n -d Two-byte decimal display" \
1684 "\n -e FORMAT STRING" \
1685 "\n -f FORMAT FILE" \
1686 "\n -n LENGTH Interpret only LENGTH bytes of input" \
1687 "\n -o Two-byte octal display" \
1688 "\n -s OFFSET Skip OFFSET bytes" \
1689 "\n -v Display all input data" \
1690 "\n -x Two-byte hexadecimal display" \
1691 IF_FEATURE_HEXDUMP_REVERSE( \
1692 "\n -R Reverse of 'hexdump -Cv'") \
1694 #define hd_trivial_usage \
1696 #define hd_full_usage "\n\n" \
1697 "hd is an alias for hexdump -C"
1699 #define hostid_trivial_usage \
1701 #define hostid_full_usage "\n\n" \
1702 "Print out a unique 32-bit identifier for the machine"
1704 #define hostname_trivial_usage \
1705 "[OPTIONS] [HOSTNAME | -F FILE]"
1706 #define hostname_full_usage "\n\n" \
1707 "Get or set hostname or DNS domain name\n" \
1710 "\n -i Addresses for the hostname" \
1711 "\n -d DNS domain name" \
1712 "\n -f Fully qualified domain name" \
1713 "\n -F FILE Use FILE's content as hostname" \
1715 #define hostname_example_usage \
1719 #define dnsdomainname_trivial_usage NOUSAGE_STR
1720 #define dnsdomainname_full_usage ""
1722 #define httpd_trivial_usage \
1726 IF_FEATURE_HTTPD_SETUID(" [-u USER[:GRP]]") \
1727 IF_FEATURE_HTTPD_BASIC_AUTH(" [-r REALM]") \
1729 "or httpd -d/-e" IF_FEATURE_HTTPD_AUTH_MD5("/-m") " STRING"
1730 #define httpd_full_usage "\n\n" \
1731 "Listen for incoming HTTP requests\n" \
1733 "\n -i Inetd mode" \
1734 "\n -f Don't daemonize" \
1735 "\n -v[v] Verbose" \
1736 "\n -c FILE Configuration file (default httpd.conf)" \
1737 "\n -p [IP:]PORT Bind to ip:port (default *:80)" \
1738 IF_FEATURE_HTTPD_SETUID( \
1739 "\n -u USER[:GRP] Set uid/gid after binding to port") \
1740 IF_FEATURE_HTTPD_BASIC_AUTH( \
1741 "\n -r REALM Authentication Realm for Basic Authentication") \
1742 "\n -h HOME Home directory (default .)" \
1743 IF_FEATURE_HTTPD_AUTH_MD5( \
1744 "\n -m STRING MD5 crypt STRING") \
1745 "\n -e STRING HTML encode STRING" \
1746 "\n -d STRING URL decode STRING" \
1748 #define hwclock_trivial_usage \
1749 IF_FEATURE_HWCLOCK_LONG_OPTIONS( \
1750 "[-r|--show] [-s|--hctosys] [-w|--systohc]" \
1751 " [-l|--localtime] [-u|--utc]" \
1754 IF_NOT_FEATURE_HWCLOCK_LONG_OPTIONS( \
1755 "[-r] [-s] [-w] [-l] [-u] [-f FILE]" \
1757 #define hwclock_full_usage "\n\n" \
1758 "Query and set hardware clock (RTC)\n" \
1760 "\n -r Show hardware clock time" \
1761 "\n -s Set system time from hardware clock" \
1762 "\n -w Set hardware clock to system time" \
1763 "\n -u Hardware clock is in UTC" \
1764 "\n -l Hardware clock is in local time" \
1765 "\n -f FILE Use specified device (e.g. /dev/rtc2)" \
1767 #define id_trivial_usage \
1769 #define id_full_usage "\n\n" \
1770 "Print information about USER or the current user\n" \
1773 "\n -Z Print the security context" \
1775 "\n -u Print user ID" \
1776 "\n -g Print group ID" \
1777 "\n -G Print supplementary group IDs" \
1778 "\n -n Print name instead of a number" \
1779 "\n -r Print real user ID instead of effective ID" \
1781 #define id_example_usage \
1783 "uid=1000(andersen) gid=1000(andersen)\n"
1785 #define ifconfig_trivial_usage \
1786 IF_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
1787 #define ifconfig_full_usage "\n\n" \
1788 "Configure a network interface\n" \
1792 " [add ADDRESS[/PREFIXLEN]]\n") \
1794 " [del ADDRESS[/PREFIXLEN]]\n") \
1795 " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \
1796 " [netmask ADDRESS] [dstaddr ADDRESS]\n" \
1797 IF_FEATURE_IFCONFIG_SLIP( \
1798 " [outfill NN] [keepalive NN]\n") \
1799 " " IF_FEATURE_IFCONFIG_HW("[hw ether" IF_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \
1800 " [[-]trailers] [[-]arp] [[-]allmulti]\n" \
1801 " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \
1802 IF_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
1803 " [mem_start NN] [io_addr NN] [irq NN]\n") \
1806 #define ifenslave_trivial_usage \
1807 "[-cdf] MASTER_IFACE SLAVE_IFACE..."
1808 #define ifenslave_full_usage "\n\n" \
1809 "Configure network interfaces for parallel routing\n" \
1811 "\n -c, --change-active Change active slave" \
1812 "\n -d, --detach Remove slave interface from bonding device" \
1813 "\n -f, --force Force, even if interface is not Ethernet" \
1814 /* "\n -r, --receive-slave Create a receive-only slave" */
1816 #define ifenslave_example_usage \
1817 "To create a bond device, simply follow these three steps:\n" \
1818 "- ensure that the required drivers are properly loaded:\n" \
1819 " # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \
1820 "- assign an IP address to the bond device:\n" \
1821 " # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n" \
1822 "- attach all the interfaces you need to the bond device:\n" \
1823 " # ifenslave bond0 eth0 eth1 eth2\n" \
1824 " If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \
1825 " interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \
1826 " To detach a dead interface without setting the bond device down:\n" \
1827 " # ifenslave -d bond0 eth1\n\n" \
1828 " To set the bond device down and automatically release all the slaves:\n" \
1829 " # ifconfig bond0 down\n\n" \
1830 " To change active slave:\n" \
1831 " # ifenslave -c bond0 eth0\n" \
1833 #define ifplugd_trivial_usage \
1835 #define ifplugd_full_usage "\n\n" \
1836 "Network interface plug detection daemon\n" \
1838 "\n -n Don't daemonize" \
1839 "\n -s Don't log to syslog" \
1840 "\n -i IFACE Interface" \
1841 "\n -f/-F Treat link detection error as link down/link up" \
1842 "\n (otherwise exit on error)" \
1843 "\n -a Don't up interface at each link probe" \
1844 "\n -M Monitor creation/destruction of interface" \
1845 "\n (otherwise it must exist)" \
1846 "\n -r PROG Script to run" \
1847 "\n -x ARG Extra argument for script" \
1848 "\n -I Don't exit on nonzero exit code from script" \
1849 "\n -p Don't run script on daemon startup" \
1850 "\n -q Don't run script on daemon quit" \
1851 "\n -l Run script on startup even if no cable is detected" \
1852 "\n -t SECS Poll time in seconds" \
1853 "\n -u SECS Delay before running script after link up" \
1854 "\n -d SECS Delay after link down" \
1855 "\n -m MODE API mode (mii, priv, ethtool, wlan, iff, auto)" \
1856 "\n -k Kill running daemon" \
1858 #define ifup_trivial_usage \
1859 "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] IFACE..."
1860 #define ifup_full_usage "\n\n" \
1862 "\n -a De/configure all interfaces automatically" \
1863 "\n -i FILE Use FILE for interface definitions" \
1864 "\n -n Print out what would happen, but don't do it" \
1865 IF_FEATURE_IFUPDOWN_MAPPING( \
1866 "\n (note: doesn't disable mappings)" \
1867 "\n -m Don't run any mappings" \
1869 "\n -v Print out what would happen before doing it" \
1870 "\n -f Force de/configuration" \
1872 #define ifdown_trivial_usage \
1873 "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..."
1874 #define ifdown_full_usage "\n\n" \
1876 "\n -a De/configure all interfaces automatically" \
1877 "\n -i FILE Use FILE for interface definitions" \
1878 "\n -n Print out what would happen, but don't do it" \
1879 IF_FEATURE_IFUPDOWN_MAPPING( \
1880 "\n (note: doesn't disable mappings)" \
1881 "\n -m Don't run any mappings" \
1883 "\n -v Print out what would happen before doing it" \
1884 "\n -f Force de/configuration" \
1886 #define inetd_trivial_usage \
1887 "[-fe] [-q N] [-R N] [CONFFILE]"
1888 #define inetd_full_usage "\n\n" \
1889 "Listen for network connections and launch programs\n" \
1891 "\n -f Run in foreground" \
1892 "\n -e Log to stderr" \
1893 "\n -q N Socket listen queue (default: 128)" \
1894 "\n -R N Pause services after N connects/min" \
1895 "\n (default: 0 - disabled)" \
1897 #define init_trivial_usage \
1899 #define init_full_usage "\n\n" \
1900 "Init is the parent of all processes"
1902 #define init_notes_usage \
1903 "This version of init is designed to be run only by the kernel.\n" \
1905 "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
1906 "the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \
1907 "runlevels, use sysvinit.\n" \
1909 "BusyBox init works just fine without an inittab. If no inittab is found,\n" \
1910 "it has the following default behavior:\n" \
1912 " ::sysinit:/etc/init.d/rcS\n" \
1913 " ::askfirst:/bin/sh\n" \
1914 " ::ctrlaltdel:/sbin/reboot\n" \
1915 " ::shutdown:/sbin/swapoff -a\n" \
1916 " ::shutdown:/bin/umount -a -r\n" \
1917 " ::restart:/sbin/init\n" \
1919 "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
1921 " tty2::askfirst:/bin/sh\n" \
1922 " tty3::askfirst:/bin/sh\n" \
1923 " tty4::askfirst:/bin/sh\n" \
1925 "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
1927 " <id>:<runlevels>:<action>:<process>\n" \
1931 " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
1932 " The id field is used by BusyBox init to specify the controlling tty for\n" \
1933 " the specified process to run on. The contents of this field are\n" \
1934 " appended to \"/dev/\" and used as-is. There is no need for this field to\n" \
1935 " be unique, although if it isn't you may have strange results. If this\n" \
1936 " field is left blank, the controlling tty is set to the console. Also\n" \
1937 " note that if BusyBox detects that a serial console is in use, then only\n" \
1938 " entries whose controlling tty is either the serial console or /dev/null\n" \
1939 " will be run. BusyBox init does nothing with utmp. We don't need no\n" \
1940 " stinkin' utmp.\n" \
1944 " The runlevels field is completely ignored.\n" \
1948 " Valid actions include: sysinit, respawn, askfirst, wait,\n" \
1949 " once, restart, ctrlaltdel, and shutdown.\n" \
1951 " The available actions can be classified into two groups: actions\n" \
1952 " that are run only once, and actions that are re-run when the specified\n" \
1953 " process exits.\n" \
1955 " Run only-once actions:\n" \
1957 " 'sysinit' is the first item run on boot. init waits until all\n" \
1958 " sysinit actions are completed before continuing. Following the\n" \
1959 " completion of all sysinit actions, all 'wait' actions are run.\n" \
1960 " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
1961 " the specified task completes. 'once' actions are asynchronous,\n" \
1962 " therefore, init does not wait for them to complete. 'restart' is\n" \
1963 " the action taken to restart the init process. By default this should\n" \
1964 " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
1965 " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
1966 " actions are run when the system detects that someone on the system\n" \
1967 " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
1968 " wants to run 'reboot' at this point to cause the system to reboot.\n" \
1969 " Finally the 'shutdown' action specifies the actions to taken when\n" \
1970 " init is told to reboot. Unmounting filesystems and disabling swap\n" \
1971 " is a very good here.\n" \
1973 " Run repeatedly actions:\n" \
1975 " 'respawn' actions are run after the 'once' actions. When a process\n" \
1976 " started with a 'respawn' action exits, init automatically restarts\n" \
1977 " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
1978 " respawning out of control. The 'askfirst' actions acts just like\n" \
1979 " respawn, except that before running the specified process it\n" \
1980 " displays the line \"Please press Enter to activate this console.\"\n" \
1981 " and then waits for the user to press enter before starting the\n" \
1982 " specified process.\n" \
1984 " Unrecognized actions (like initdefault) will cause init to emit an\n" \
1985 " error message, and then go along with its business. All actions are\n" \
1986 " run in the order they appear in /etc/inittab.\n" \
1990 " Specifies the process to be executed and its command line.\n" \
1992 "Example /etc/inittab file:\n" \
1994 " # This is run first except when booting in single-user mode\n" \
1996 " ::sysinit:/etc/init.d/rcS\n" \
1998 " # /bin/sh invocations on selected ttys\n" \
2000 " # Start an \"askfirst\" shell on the console (whatever that may be)\n" \
2001 " ::askfirst:-/bin/sh\n" \
2002 " # Start an \"askfirst\" shell on /dev/tty2-4\n" \
2003 " tty2::askfirst:-/bin/sh\n" \
2004 " tty3::askfirst:-/bin/sh\n" \
2005 " tty4::askfirst:-/bin/sh\n" \
2007 " # /sbin/getty invocations for selected ttys\n" \
2009 " tty4::respawn:/sbin/getty 38400 tty4\n" \
2010 " tty5::respawn:/sbin/getty 38400 tty5\n" \
2013 " # Example of how to put a getty on a serial line (for a terminal)\n" \
2015 " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
2016 " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
2018 " # Example how to put a getty on a modem line\n" \
2019 " #::respawn:/sbin/getty 57600 ttyS2\n" \
2021 " # Stuff to do when restarting the init process\n" \
2022 " ::restart:/sbin/init\n" \
2024 " # Stuff to do before rebooting\n" \
2025 " ::ctrlaltdel:/sbin/reboot\n" \
2026 " ::shutdown:/bin/umount -a -r\n" \
2027 " ::shutdown:/sbin/swapoff -a\n"
2029 #define inotifyd_trivial_usage \
2030 "PROG FILE1[:MASK]..."
2031 #define inotifyd_full_usage "\n\n" \
2032 "Run PROG on filesystem changes." \
2033 "\nWhen a filesystem event matching MASK occurs on FILEn," \
2034 "\nPROG ACTUAL_EVENTS FILEn [SUBFILE] is run." \
2036 "\n a File is accessed" \
2037 "\n c File is modified" \
2038 "\n e Metadata changed" \
2039 "\n w Writable file is closed" \
2040 "\n 0 Unwritable file is closed" \
2041 "\n r File is opened" \
2042 "\n D File is deleted" \
2043 "\n M File is moved" \
2044 "\n u Backing fs is unmounted" \
2045 "\n o Event queue overflowed" \
2046 "\n x File can't be watched anymore" \
2047 "\nIf watching a directory:" \
2048 "\n m Subfile is moved into dir" \
2049 "\n y Subfile is moved out of dir" \
2050 "\n n Subfile is created" \
2051 "\n d Subfile is deleted" \
2053 "\ninotifyd waits for PROG to exit." \
2054 "\nWhen x event happens for all FILEs, inotifyd exits." \
2056 /* 2.6 style insmod has no options and required filename
2057 * (not module name - .ko can't be omitted) */
2058 #define insmod_trivial_usage \
2059 IF_FEATURE_2_4_MODULES("[OPTIONS] MODULE ") \
2060 IF_NOT_FEATURE_2_4_MODULES("FILE ") \
2062 #define insmod_full_usage "\n\n" \
2063 "Load the specified kernel modules into the kernel" \
2064 IF_FEATURE_2_4_MODULES( "\n" \
2066 "\n -f Force module to load into the wrong kernel version" \
2067 "\n -k Make module autoclean-able" \
2070 "\n -L Lock to prevent simultaneous loads of a module" \
2071 IF_FEATURE_INSMOD_LOAD_MAP( \
2072 "\n -m Output load map to stdout" \
2074 "\n -o NAME Set internal module name to NAME" \
2075 "\n -x Don't export externs" \
2078 /* -v, -b, -c are ignored */
2079 #define install_trivial_usage \
2080 "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [SOURCE]... DEST"
2081 #define install_full_usage "\n\n" \
2082 "Copy files and set attributes\n" \
2084 "\n -c Just copy (default)" \
2085 "\n -d Create directories" \
2086 "\n -D Create leading target directories" \
2087 "\n -s Strip symbol table" \
2088 "\n -p Preserve date" \
2089 "\n -o USER Set ownership" \
2090 "\n -g GRP Set group ownership" \
2091 "\n -m MODE Set permissions" \
2093 "\n -Z Set security context" \
2096 #define ionice_trivial_usage \
2097 "[-c 1-3] [-n 0-7] [-p PID] [PROG]"
2098 #define ionice_full_usage "\n\n" \
2099 "Change I/O scheduling class and priority\n" \
2101 "\n -c Class. 1:realtime 2:best-effort 3:idle" \
2104 /* would need to make the " | " optional depending on more than one selected: */
2105 #define ip_trivial_usage \
2107 IF_FEATURE_IP_ADDRESS("address | ") \
2108 IF_FEATURE_IP_ROUTE("route | ") \
2109 IF_FEATURE_IP_LINK("link | ") \
2110 IF_FEATURE_IP_TUNNEL("tunnel | ") \
2111 IF_FEATURE_IP_RULE("rule") \
2113 #define ip_full_usage "\n\n" \
2114 "ip [OPTIONS] OBJECT {COMMAND}\n" \
2115 "where OBJECT := {" \
2116 IF_FEATURE_IP_ADDRESS("address | ") \
2117 IF_FEATURE_IP_ROUTE("route | ") \
2118 IF_FEATURE_IP_LINK("link | ") \
2119 IF_FEATURE_IP_TUNNEL("tunnel | ") \
2120 IF_FEATURE_IP_RULE("rule") \
2122 "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \
2124 #define ipaddr_trivial_usage \
2125 "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
2126 " [dev STRING] [to PREFIX] }"
2127 #define ipaddr_full_usage "\n\n" \
2128 "ipaddr {add|delete} IFADDR dev STRING\n" \
2129 "ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \
2130 " [to PREFIX] [label PATTERN]\n" \
2131 " IFADDR := PREFIX | ADDR peer PREFIX\n" \
2132 " [broadcast ADDR] [anycast ADDR]\n" \
2133 " [label STRING] [scope SCOPE-ID]\n" \
2134 " SCOPE-ID := [host | link | global | NUMBER]" \
2136 #define ipcalc_trivial_usage \
2137 "[OPTIONS] ADDRESS[[/]NETMASK] [NETMASK]"
2138 #define ipcalc_full_usage "\n\n" \
2139 "Calculate IP network settings from a IP address\n" \
2141 IF_FEATURE_IPCALC_LONG_OPTIONS( \
2142 "\n -b,--broadcast Display calculated broadcast address" \
2143 "\n -n,--network Display calculated network address" \
2144 "\n -m,--netmask Display default netmask for IP" \
2145 IF_FEATURE_IPCALC_FANCY( \
2146 "\n -p,--prefix Display the prefix for IP/NETMASK" \
2147 "\n -h,--hostname Display first resolved host name" \
2148 "\n -s,--silent Don't ever display error messages" \
2151 IF_NOT_FEATURE_IPCALC_LONG_OPTIONS( \
2152 "\n -b Display calculated broadcast address" \
2153 "\n -n Display calculated network address" \
2154 "\n -m Display default netmask for IP" \
2155 IF_FEATURE_IPCALC_FANCY( \
2156 "\n -p Display the prefix for IP/NETMASK" \
2157 "\n -h Display first resolved host name" \
2158 "\n -s Don't ever display error messages" \
2162 #define ipcrm_trivial_usage \
2163 "[-MQS key] [-mqs id]"
2164 #define ipcrm_full_usage "\n\n" \
2165 "Upper-case options MQS remove an object by shmkey value.\n" \
2166 "Lower-case options remove an object by shmid value.\n" \
2168 "\n -mM Remove memory segment after last detach" \
2169 "\n -qQ Remove message queue" \
2170 "\n -sS Remove semaphore" \
2172 #define ipcs_trivial_usage \
2173 "[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
2174 #define ipcs_full_usage "\n\n" \
2175 " -i Show specific resource" \
2176 "\nResource specification:" \
2177 "\n -m Shared memory segments" \
2178 "\n -q Message queues" \
2179 "\n -s Semaphore arrays" \
2180 "\n -a All (default)" \
2181 "\nOutput format:" \
2188 #define iplink_trivial_usage \
2189 "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }"
2190 #define iplink_full_usage "\n\n" \
2191 "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
2192 " dynamic { on | off } |\n" \
2194 "iplink show [DEVICE]" \
2196 #define iproute_trivial_usage \
2197 "{ list | flush | { add | del | change | append |\n" \
2198 " replace | monitor } ROUTE }"
2199 #define iproute_full_usage "\n\n" \
2200 "iproute { list | flush } SELECTOR\n" \
2201 "iproute get ADDRESS [from ADDRESS iif STRING]\n" \
2202 " [oif STRING] [tos TOS]\n" \
2203 "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
2204 " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \
2205 " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]\n" \
2206 " [metric METRIC]" \
2208 #define iprule_trivial_usage \
2209 "{[list | add | del] RULE}"
2210 #define iprule_full_usage "\n\n" \
2211 "iprule [list | add | del] SELECTOR ACTION\n" \
2212 " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \
2213 " [dev STRING] [pref NUMBER]\n" \
2214 " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \
2215 " [prohibit | reject | unreachable]\n" \
2216 " [realms [SRCREALM/]DSTREALM]\n" \
2217 " TABLE_ID := [local | main | default | NUMBER]" \
2219 #define iptunnel_trivial_usage \
2220 "{ add | change | del | show } [NAME]\n" \
2221 " [mode { ipip | gre | sit }]\n" \
2222 " [remote ADDR] [local ADDR] [ttl TTL]"
2223 #define iptunnel_full_usage "\n\n" \
2224 "iptunnel { add | change | del | show } [NAME]\n" \
2225 " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \
2226 " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
2227 " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \
2229 #define kbd_mode_trivial_usage \
2230 "[-a|k|s|u] [-C TTY]"
2231 #define kbd_mode_full_usage "\n\n" \
2232 "Report or set the keyboard mode\n" \
2234 "\n -a Default (ASCII)" \
2235 "\n -k Medium-raw (keyboard)" \
2236 "\n -s Raw (scancode)" \
2237 "\n -u Unicode (utf-8)" \
2238 "\n -C TTY Affect TTY instead of /dev/tty" \
2240 #define kill_trivial_usage \
2241 "[-l] [-SIG] PID..."
2242 #define kill_full_usage "\n\n" \
2243 "Send a signal (default: TERM) to given PIDs\n" \
2245 "\n -l List all signal names and numbers" \
2246 /* "\n -s SIG Yet another way of specifying SIG" */ \
2248 #define kill_example_usage \
2249 "$ ps | grep apache\n" \
2250 "252 root root S [apache]\n" \
2251 "263 www-data www-data S [apache]\n" \
2252 "264 www-data www-data S [apache]\n" \
2253 "265 www-data www-data S [apache]\n" \
2254 "266 www-data www-data S [apache]\n" \
2255 "267 www-data www-data S [apache]\n" \
2258 #define killall_trivial_usage \
2259 "[-l] [-q] [-SIG] PROCESS_NAME..."
2260 #define killall_full_usage "\n\n" \
2261 "Send a signal (default: TERM) to given processes\n" \
2263 "\n -l List all signal names and numbers" \
2264 /* "\n -s SIG Yet another way of specifying SIG" */ \
2265 "\n -q Don't complain if no processes were killed" \
2267 #define killall_example_usage \
2268 "$ killall apache\n"
2270 #define killall5_trivial_usage \
2271 "[-l] [-SIG] [-o PID]..."
2272 #define killall5_full_usage "\n\n" \
2273 "Send a signal (default: TERM) to all processes outside current session\n" \
2275 "\n -l List all signal names and numbers" \
2276 "\n -o PID Don't signal this PID" \
2277 /* "\n -s SIG Yet another way of specifying SIG" */ \
2279 #define klogd_trivial_usage \
2281 #define klogd_full_usage "\n\n" \
2284 "\n -c N Only messages with level < N are printed to console" \
2285 "\n -n Run in foreground" \
2287 #define length_trivial_usage \
2289 #define length_full_usage "\n\n" \
2290 "Print STRING's length"
2292 #define length_example_usage \
2293 "$ length Hello\n" \
2296 #define less_trivial_usage \
2297 "[-EMNmh~I?] [FILE]..."
2298 #define less_full_usage "\n\n" \
2299 "View FILE (or stdin) one screenful at a time\n" \
2301 "\n -E Quit once the end of a file is reached" \
2302 "\n -M,-m Display status line with line numbers" \
2303 "\n and percentage through the file" \
2304 "\n -N Prefix line number to each line" \
2305 "\n -I Ignore case in all searches" \
2306 "\n -~ Suppress ~s displayed past the end of the file" \
2308 #define linux32_trivial_usage NOUSAGE_STR
2309 #define linux32_full_usage ""
2310 #define linux64_trivial_usage NOUSAGE_STR
2311 #define linux64_full_usage ""
2313 #define linuxrc_trivial_usage NOUSAGE_STR
2314 #define linuxrc_full_usage ""
2316 #define setarch_trivial_usage \
2317 "personality PROG ARGS"
2318 #define setarch_full_usage "\n\n" \
2319 "Personality may be:\n" \
2320 " linux32 Set 32bit uname emulation\n" \
2321 " linux64 Set 64bit uname emulation" \
2323 #define ln_trivial_usage \
2324 "[OPTIONS] TARGET... LINK|DIR"
2325 #define ln_full_usage "\n\n" \
2326 "Create a link LINK or DIR/TARGET to the specified TARGET(s)\n" \
2328 "\n -s Make symlinks instead of hardlinks" \
2329 "\n -f Remove existing destinations" \
2330 "\n -n Don't dereference symlinks - treat like normal file" \
2331 "\n -b Make a backup of the target (if exists) before link operation" \
2332 "\n -S suf Use suffix instead of ~ when making backup files" \
2334 #define ln_example_usage \
2335 "$ ln -s BusyBox /tmp/ls\n" \
2336 "$ ls -l /tmp/ls\n" \
2337 "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
2339 #define load_policy_trivial_usage NOUSAGE_STR
2340 #define load_policy_full_usage ""
2342 #define loadfont_trivial_usage \
2344 #define loadfont_full_usage "\n\n" \
2345 "Load a console font from stdin" \
2346 /* "\n -C TTY Affect TTY instead of /dev/tty" */ \
2348 #define loadfont_example_usage \
2349 "$ loadfont < /etc/i18n/fontname\n"
2351 #define loadkmap_trivial_usage \
2353 #define loadkmap_full_usage "\n\n" \
2354 "Load a binary keyboard translation table from stdin\n" \
2355 /* "\n -C TTY Affect TTY instead of /dev/tty" */ \
2357 #define loadkmap_example_usage \
2358 "$ loadkmap < /etc/i18n/lang-keymap\n"
2360 #define logger_trivial_usage \
2361 "[OPTIONS] [MESSAGE]"
2362 #define logger_full_usage "\n\n" \
2363 "Write MESSAGE (or stdin) to syslog\n" \
2365 "\n -s Log to stderr as well as the system log" \
2366 "\n -t TAG Log using the specified tag (defaults to user name)" \
2367 "\n -p PRIO Priority (numeric or facility.level pair)" \
2369 #define logger_example_usage \
2370 "$ logger \"hello\"\n"
2372 #define login_trivial_usage \
2373 "[-p] [-h HOST] [[-f] USER]"
2374 #define login_full_usage "\n\n" \
2375 "Begin a new session on the system\n" \
2377 "\n -f Don't authenticate (user already authenticated)" \
2378 "\n -h Name of the remote host" \
2379 "\n -p Preserve environment" \
2381 #define logname_trivial_usage \
2383 #define logname_full_usage "\n\n" \
2384 "Print the name of the current user"
2385 #define logname_example_usage \
2389 #define logread_trivial_usage \
2391 #define logread_full_usage "\n\n" \
2392 "Show messages in syslogd's circular buffer\n" \
2394 "\n -f Output data as log grows" \
2396 #define losetup_trivial_usage \
2397 "[-o OFS] LOOPDEV FILE - associate loop devices\n" \
2398 " losetup -d LOOPDEV - disassociate\n" \
2399 " losetup [-f] - show"
2400 #define losetup_full_usage "\n\n" \
2402 "\n -o OFS Start OFS bytes into FILE" \
2403 "\n -f Show first free loop device" \
2405 #define losetup_notes_usage \
2406 "No arguments will display all current associations.\n" \
2407 "One argument (losetup /dev/loop1) will display the current association\n" \
2408 "(if any), or disassociate it (with -d). The display shows the offset\n" \
2409 "and filename of the file the loop device is currently bound to.\n\n" \
2410 "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
2411 "with an optional offset (-o 12345). Encryption is not yet supported.\n" \
2412 "losetup -f will show the first loop free loop device\n\n"
2414 #define lpd_trivial_usage \
2415 "SPOOLDIR [HELPER [ARGS]]"
2416 #define lpd_full_usage "\n\n" \
2417 "SPOOLDIR must contain (symlinks to) device nodes or directories" \
2418 "\nwith names matching print queue names. In the first case, jobs are" \
2419 "\nsent directly to the device. Otherwise each job is stored in queue" \
2420 "\ndirectory and HELPER program is called. Name of file to print" \
2421 "\nis passed in $DATAFILE variable." \
2423 "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \
2425 #define lpq_trivial_usage \
2426 "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID]... [-fs]"
2427 #define lpq_full_usage "\n\n" \
2429 "\n -P lp service to connect to (else uses $PRINTER)" \
2430 "\n -d Delete jobs" \
2431 "\n -f Force any waiting job to be printed" \
2432 "\n -s Short display" \
2434 #define lpr_trivial_usage \
2435 "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE]..."
2436 /* -C CLASS exists too, not shown.
2437 * CLASS is supposed to be printed on banner page, if one is requested */
2438 #define lpr_full_usage "\n\n" \
2440 "\n -P lp service to connect to (else uses $PRINTER)"\
2441 "\n -m Send mail on completion" \
2442 "\n -h Print banner page too" \
2445 #define ls_trivial_usage \
2446 "[-1Aa" IF_FEATURE_LS_TIMESTAMPS("c") "Cd" \
2447 IF_FEATURE_LS_TIMESTAMPS("e") IF_FEATURE_LS_FILETYPES("F") "iln" \
2448 IF_FEATURE_LS_FILETYPES("p") IF_FEATURE_LS_FOLLOWLINKS("L") \
2449 IF_FEATURE_LS_RECURSIVE("R") IF_FEATURE_LS_SORTFILES("rS") "s" \
2450 IF_FEATURE_AUTOWIDTH("T") IF_FEATURE_LS_TIMESTAMPS("tu") \
2451 IF_FEATURE_LS_SORTFILES("v") IF_FEATURE_AUTOWIDTH("w") "x" \
2452 IF_FEATURE_LS_SORTFILES("X") IF_FEATURE_HUMAN_READABLE("h") "k" \
2453 IF_SELINUX("K") "] [FILE]..."
2454 #define ls_full_usage "\n\n" \
2455 "List directory contents\n" \
2457 "\n -1 List in a single column" \
2458 "\n -A Don't list . and .." \
2459 "\n -a Don't hide entries starting with ." \
2460 "\n -C List by columns" \
2461 IF_FEATURE_LS_TIMESTAMPS( \
2462 "\n -c With -l: sort by ctime") \
2463 IF_FEATURE_LS_COLOR( \
2464 "\n --color[={always,never,auto}] Control coloring") \
2465 "\n -d List directory entries instead of contents" \
2466 IF_FEATURE_LS_TIMESTAMPS( \
2467 "\n -e List full date and time") \
2468 IF_FEATURE_LS_FILETYPES( \
2469 "\n -F Append indicator (one of */=@|) to entries") \
2470 "\n -i List inode numbers" \
2471 "\n -l Long listing format" \
2472 "\n -n List numeric UIDs and GIDs instead of names" \
2473 IF_FEATURE_LS_FILETYPES( \
2474 "\n -p Append indicator (one of /=@|) to entries") \
2475 IF_FEATURE_LS_FOLLOWLINKS( \
2476 "\n -L List entries pointed to by symlinks") \
2477 IF_FEATURE_LS_RECURSIVE( \
2479 IF_FEATURE_LS_SORTFILES( \
2480 "\n -r Sort in reverse order") \
2481 IF_FEATURE_LS_SORTFILES( \
2482 "\n -S Sort by file size") \
2483 "\n -s List the size of each file, in blocks" \
2484 IF_FEATURE_AUTOWIDTH( \
2485 "\n -T N Assume tabstop every N columns") \
2486 IF_FEATURE_LS_TIMESTAMPS( \
2487 "\n -t With -l: sort by modification time") \
2488 IF_FEATURE_LS_TIMESTAMPS( \
2489 "\n -u With -l: sort by access time") \
2490 IF_FEATURE_LS_SORTFILES( \
2491 "\n -v Sort by version") \
2492 IF_FEATURE_AUTOWIDTH( \
2493 "\n -w N Assume the terminal is N columns wide") \
2494 "\n -x List by lines" \
2495 IF_FEATURE_LS_SORTFILES( \
2496 "\n -X Sort by extension") \
2497 IF_FEATURE_HUMAN_READABLE( \
2498 "\n -h List sizes in human readable format (1K 243M 2G)") \
2500 "\n -k List security context") \
2502 "\n -K List security context in long format") \
2504 "\n -Z List security context and permission") \
2506 #define lsattr_trivial_usage \
2507 "[-Radlv] [FILE]..."
2508 #define lsattr_full_usage "\n\n" \
2509 "List file attributes on an ext2 fs\n" \
2512 "\n -a Don't hide entries starting with ." \
2513 "\n -d List directory entries instead of contents" \
2514 "\n -l List long flag names" \
2515 "\n -v List the file's version/generation number" \
2517 #define lsmod_trivial_usage \
2519 #define lsmod_full_usage "\n\n" \
2520 "List the currently loaded kernel modules"
2522 #define lspci_trivial_usage \
2524 #define lspci_full_usage "\n\n" \
2525 "List all PCI devices" \
2527 "\n -m Parseable output" \
2528 "\n -k Show driver" \
2530 #define lsusb_trivial_usage NOUSAGE_STR
2531 #define lsusb_full_usage ""
2533 #if ENABLE_FEATURE_MAKEDEVS_LEAF
2534 #define makedevs_trivial_usage \
2535 "NAME TYPE MAJOR MINOR FIRST LAST [s]"
2536 #define makedevs_full_usage "\n\n" \
2537 "Create a range of block or character special files" \
2540 "\n b Block device" \
2541 "\n c Character device" \
2542 "\n f FIFO, MAJOR and MINOR are ignored" \
2544 "\nFIRST..LAST specify numbers appended to NAME." \
2545 "\nIf 's' is the last argument, the base device is created as well." \
2548 "\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \
2549 "\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
2550 #define makedevs_example_usage \
2551 "# makedevs /dev/ttyS c 4 66 2 63\n" \
2552 "[creates ttyS2-ttyS63]\n" \
2553 "# makedevs /dev/hda b 3 0 0 8 s\n" \
2554 "[creates hda,hda1-hda8]\n"
2557 #if ENABLE_FEATURE_MAKEDEVS_TABLE
2558 #define makedevs_trivial_usage \
2559 "[-d device_table] rootdir"
2560 #define makedevs_full_usage "\n\n" \
2561 "Create a range of special files as specified in a device table.\n" \
2562 "Device table entries take the form of:\n" \
2563 "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
2564 "Where name is the file name, type can be one of:\n" \
2565 " f Regular file\n" \
2567 " c Character device\n" \
2568 " b Block device\n" \
2569 " p Fifo (named pipe)\n" \
2570 "uid is the user id for the target file, gid is the group id for the\n" \
2571 "target file. The rest of the entries (major, minor, etc) apply to\n" \
2572 "to device special files. A '-' may be used for blank entries."
2573 #define makedevs_example_usage \
2575 "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
2576 "/dev d 755 0 0 - - - - -\n" \
2577 "/dev/console c 666 0 0 5 1 - - -\n" \
2578 "/dev/null c 666 0 0 1 3 0 0 -\n" \
2579 "/dev/zero c 666 0 0 1 5 0 0 -\n" \
2580 "/dev/hda b 640 0 0 3 0 0 0 -\n" \
2581 "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
2591 #define makemime_trivial_usage \
2592 "[OPTIONS] [FILE]..."
2593 #define makemime_full_usage "\n\n" \
2594 "Create multipart MIME-encoded message from FILEs\n" \
2595 /* "Transfer encoding is base64, disposition is inline (not attachment)\n" */ \
2597 "\n -o FILE Output. Default: stdout" \
2598 "\n -a HDR Add header. Examples:" \
2599 "\n \"From: user@host.org\", \"Date: `date -R`\"" \
2600 "\n -c CT Content type. Default: text/plain" \
2601 "\n -C CS Charset. Default: " CONFIG_FEATURE_MIME_CHARSET \
2602 /* "\n -e ENC Transfer encoding. Ignored. base64 is assumed" */ \
2604 "\nOther options are silently ignored" \
2606 #define man_trivial_usage \
2607 "[OPTIONS] [MANPAGE]..."
2608 #define man_full_usage "\n\n" \
2609 "Format and display manual page\n" \
2611 "\n -a Display all pages" \
2612 "\n -w Show page locations" \
2614 #define matchpathcon_trivial_usage \
2615 "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
2616 #define matchpathcon_full_usage "\n\n" \
2617 " -n Don't display path" \
2618 "\n -N Don't use translations" \
2619 "\n -f Use alternate file_context file" \
2620 "\n -p Use prefix to speed translations" \
2621 "\n -V Verify file context on disk matches defaults" \
2623 #define md5sum_trivial_usage \
2624 "[OPTIONS] [FILE]..." \
2625 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTIONS] -c [FILE]")
2626 #define md5sum_full_usage "\n\n" \
2627 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
2628 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2630 "\n -c Check sums against given list" \
2631 "\n -s Don't output anything, status code shows success" \
2632 "\n -w Warn about improperly formatted checksum lines" \
2635 #define md5sum_example_usage \
2636 "$ md5sum < busybox\n" \
2637 "6fd11e98b98a58f64ff3398d7b324003\n" \
2638 "$ md5sum busybox\n" \
2639 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
2641 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
2645 #define sha1sum_trivial_usage \
2646 "[OPTIONS] [FILE]..." \
2647 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTIONS] -c [FILE]")
2648 #define sha1sum_full_usage "\n\n" \
2649 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums" \
2650 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2652 "\n -c Check sums against given list" \
2653 "\n -s Don't output anything, status code shows success" \
2654 "\n -w Warn about improperly formatted checksum lines" \
2657 #define sha256sum_trivial_usage \
2658 "[OPTIONS] [FILE]..." \
2659 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha256sum [OPTIONS] -c [FILE]")
2660 #define sha256sum_full_usage "\n\n" \
2661 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA256 checksums" \
2662 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2664 "\n -c Check sums against given list" \
2665 "\n -s Don't output anything, status code shows success" \
2666 "\n -w Warn about improperly formatted checksum lines" \
2669 #define sha512sum_trivial_usage \
2670 "[OPTIONS] [FILE]..." \
2671 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha512sum [OPTIONS] -c [FILE]")
2672 #define sha512sum_full_usage "\n\n" \
2673 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA512 checksums" \
2674 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2676 "\n -c Check sums against given list" \
2677 "\n -s Don't output anything, status code shows success" \
2678 "\n -w Warn about improperly formatted checksum lines" \
2681 #define mdev_trivial_usage \
2683 #define mdev_full_usage "\n\n" \
2684 " -s Scan /sys and populate /dev during system boot\n" \
2686 "It can be run by kernel as a hotplug helper. To activate it:\n" \
2687 " echo /sbin/mdev > /proc/sys/kernel/hotplug\n" \
2688 IF_FEATURE_MDEV_CONF( \
2689 "It uses /etc/mdev.conf with lines\n" \
2690 "[-]DEVNAME UID:GID PERM" \
2691 IF_FEATURE_MDEV_RENAME(" [>|=PATH]") \
2692 IF_FEATURE_MDEV_EXEC(" [@|$|*PROG]") \
2695 #define mdev_notes_usage "" \
2696 IF_FEATURE_MDEV_CONFIG( \
2697 "The mdev config file contains lines that look like:\n" \
2698 " hd[a-z][0-9]* 0:3 660\n\n" \
2699 "That's device name (with regex match), uid:gid, and permissions.\n\n" \
2700 IF_FEATURE_MDEV_EXEC( \
2701 "Optionally, that can be followed (on the same line) by a special character\n" \
2702 "and a command line to run after creating/before deleting the corresponding\n" \
2703 "device(s). The environment variable $MDEV indicates the active device node\n" \
2704 "(which is useful if it's a regex match). For example:\n\n" \
2705 " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
2706 "The special characters are @ (run after creating), $ (run before deleting),\n" \
2707 "and * (run both after creating and before deleting). The commands run in\n" \
2708 "the /dev directory, and use system() which calls /bin/sh.\n\n" \
2710 "Config file parsing stops on the first matching line. If no config\n" \
2711 "entry is matched, devices are created with default 0:0 660. (Make\n" \
2712 "the last line match .* to override this.)\n\n" \
2715 #define mesg_trivial_usage \
2717 #define mesg_full_usage "\n\n" \
2718 "Control write access to your terminal\n" \
2719 " y Allow write access to your terminal\n" \
2720 " n Disallow write access to your terminal"
2722 #define microcom_trivial_usage \
2723 "[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY"
2724 #define microcom_full_usage "\n\n" \
2725 "Copy bytes for stdin to TTY and from TTY to stdout\n" \
2727 "\n -d Wait up to DELAY ms for TTY output before sending every" \
2728 "\n next byte to it" \
2729 "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \
2730 "\n -s Set serial line to SPEED" \
2731 "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \
2733 #define mkdir_trivial_usage \
2734 "[OPTIONS] DIRECTORY..."
2735 #define mkdir_full_usage "\n\n" \
2736 "Create DIRECTORY\n" \
2739 "\n -p No error if exists; make parent directories as needed" \
2741 "\n -Z Set security context" \
2744 #define mkdir_example_usage \
2745 "$ mkdir /tmp/foo\n" \
2746 "$ mkdir /tmp/foo\n" \
2747 "/tmp/foo: File exists\n" \
2748 "$ mkdir /tmp/foo/bar/baz\n" \
2749 "/tmp/foo/bar/baz: No such file or directory\n" \
2750 "$ mkdir -p /tmp/foo/bar/baz\n"
2752 #define mkfifo_trivial_usage \
2754 #define mkfifo_full_usage "\n\n" \
2755 "Create named pipe (identical to 'mknod name p')\n" \
2757 "\n -m MODE Mode (default a=rw)" \
2759 "\n -Z Set security context" \
2762 #define mkfs_ext2_trivial_usage \
2764 /* "[-c|-l filename] " */ \
2766 /* "[-f fragment-size] [-g blocks-per-group] " */ \
2767 "[-i INODE_RATIO] [-I INODE_SIZE] " \
2768 /* "[-j] [-J journal-options] [-N number-of-inodes] " */ \
2769 "[-m RESERVED_PERCENT] " \
2770 /* "[-o creator-os] [-O feature[,...]] [-q] " */ \
2771 /* "[r fs-revision-level] [-E extended-options] [-v] [-F] " */ \
2773 /* "[-M last-mounted-directory] [-S] [-T filesystem-type] " */ \
2775 #define mkfs_ext2_full_usage "\n\n" \
2776 " -b BLK_SIZE Block size, bytes" \
2777 /* "\n -c Check device for bad blocks" */ \
2778 /* "\n -E opts Set extended options" */ \
2779 /* "\n -f size Fragment size in bytes" */ \
2781 /* "\n -g N Number of blocks in a block group" */ \
2782 "\n -i RATIO Max number of files is filesystem_size / RATIO" \
2783 "\n -I BYTES Inode size (min 128)" \
2784 /* "\n -j Create a journal (ext3)" */ \
2785 /* "\n -J opts Set journal options (size/device)" */ \
2786 /* "\n -l file Read bad blocks list from file" */ \
2787 "\n -L LBL Volume label" \
2788 "\n -m PERCENT Percent of blocks to reserve for admin" \
2789 /* "\n -M dir Set last mounted directory" */ \
2791 /* "\n -N N Number of inodes to create" */ \
2792 /* "\n -o os Set the 'creator os' field" */ \
2793 /* "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" */ \
2794 /* "\n -q Quiet" */ \
2795 /* "\n -r rev Set filesystem revision" */ \
2796 /* "\n -S Write superblock and group descriptors only" */ \
2797 /* "\n -T fs-type Set usage type (news/largefile/largefile4)" */ \
2798 /* "\n -v Verbose" */ \
2800 #define mkfs_minix_trivial_usage \
2801 "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]"
2802 #define mkfs_minix_full_usage "\n\n" \
2803 "Make a MINIX filesystem\n" \
2805 "\n -c Check device for bad blocks" \
2806 "\n -n [14|30] Maximum length of filenames" \
2807 "\n -i INODES Number of inodes for the filesystem" \
2808 "\n -l FILE Read bad blocks list from FILE" \
2809 "\n -v Make version 2 filesystem" \
2811 #define mkfs_reiser_trivial_usage \
2812 "[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]"
2814 #define mkfs_reiser_full_usage "\n\n" \
2815 "Make a ReiserFS V3 filesystem\n" \
2818 "\n -l LBL Volume label" \
2820 #define mkfs_vfat_trivial_usage \
2821 "[-v] [-n LABEL] BLOCKDEV [KBYTES]"
2822 /* Accepted but ignored:
2823 "[-c] [-C] [-I] [-l bad-block-file] [-b backup-boot-sector] "
2824 "[-m boot-msg-file] [-i volume-id] "
2825 "[-s sectors-per-cluster] [-S logical-sector-size] [-f number-of-FATs] "
2826 "[-h hidden-sectors] [-F fat-size] [-r root-dir-entries] [-R reserved-sectors] "
2828 #define mkfs_vfat_full_usage "\n\n" \
2829 "Make a FAT32 filesystem\n" \
2831 /* "\n -c Check device for bad blocks" */ \
2833 /* "\n -I Allow to use entire disk device (e.g. /dev/hda)" */ \
2834 "\n -n LBL Volume label" \
2836 #define mknod_trivial_usage \
2837 "[OPTIONS] NAME TYPE MAJOR MINOR"
2838 #define mknod_full_usage "\n\n" \
2839 "Create a special file (block, character, or pipe)\n" \
2841 "\n -m Create the special file using the specified mode (default a=rw)" \
2842 "\nTYPEs include:" \
2843 "\n b: Make a block device" \
2844 "\n c or u: Make a character device" \
2845 "\n p: Make a named pipe (MAJOR and MINOR are ignored)" \
2847 "\n -Z Set security context" \
2850 #define mknod_example_usage \
2851 "$ mknod /dev/fd0 b 2 0\n" \
2852 "$ mknod -m 644 /tmp/pipe p\n"
2854 #define mkswap_trivial_usage \
2855 "[OPTIONS] BLOCKDEV [KBYTES]"
2856 #define mkswap_full_usage "\n\n" \
2857 "Prepare BLOCKDEV to be used as swap partition\n" \
2861 #define mktemp_trivial_usage \
2862 "[-dt] [-p DIR] [TEMPLATE]"
2863 #define mktemp_full_usage "\n\n" \
2864 "Create a temporary file with name based on TEMPLATE and print its name.\n" \
2865 "TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" \
2867 "\n -d Make a directory instead of a file" \
2868 /* "\n -q Fail silently if an error occurs" - we ignore it */ \
2869 "\n -t Generate a path rooted in temporary directory" \
2870 "\n -p DIR Use DIR as a temporary directory (implies -t)" \
2872 "\nFor -t or -p, directory is chosen as follows:" \
2873 "\n$TMPDIR if set, else -p DIR, else /tmp" \
2875 #define mktemp_example_usage \
2876 "$ mktemp /tmp/temp.XXXXXX\n" \
2877 "/tmp/temp.mWiLjM\n" \
2878 "$ ls -la /tmp/temp.mWiLjM\n" \
2879 "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
2881 #define modprobe_trivial_usage \
2882 IF_MODPROBE_SMALL("[-qfwrsv] MODULE [symbol=value]...") \
2883 IF_NOT_MODPROBE_SMALL("[-" \
2884 IF_FEATURE_2_4_MODULES("k")"nqrsv" \
2885 IF_FEATURE_MODPROBE_BLACKLIST("b")"] MODULE [symbol=value]...")
2886 #define modprobe_full_usage "\n\n" \
2888 IF_MODPROBE_SMALL( \
2891 "\n -w Wait for unload" \
2892 "\n -r Remove module (stacks) or do autoclean" \
2893 "\n -s Report via syslog instead of stderr" \
2896 IF_NOT_MODPROBE_SMALL( \
2897 IF_FEATURE_2_4_MODULES( \
2898 "\n -k Make module autoclean-able" \
2902 "\n -r Remove module (stacks) or do autoclean" \
2903 "\n -s Report via syslog instead of stderr" \
2905 IF_FEATURE_MODPROBE_BLACKLIST( \
2906 "\n -b Apply blacklist to module names too" \
2910 #define modprobe_notes_usage \
2911 "modprobe can (un)load a stack of modules, passing each module options (when\n" \
2912 "loading). modprobe uses a configuration file to determine what option(s) to\n" \
2913 "pass each module it loads.\n" \
2915 "The configuration file is searched (in this order):\n" \
2917 " /etc/modprobe.conf (2.6 only)\n" \
2918 " /etc/modules.conf\n" \
2919 " /etc/conf.modules (deprecated)\n" \
2921 "They all have the same syntax (see below). If none is present, it is\n" \
2922 "_not_ an error; each loaded module is then expected to load without\n" \
2923 "options. Once a file is found, the others are tested for.\n" \
2925 "/etc/modules.conf entry format:\n" \
2927 " alias <alias_name> <mod_name>\n" \
2928 " Makes it possible to modprobe alias_name, when there is no such module.\n" \
2929 " It makes sense if your mod_name is long, or you want a more representative\n" \
2930 " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \
2931 " This makes it also possible to use a different set of options (below) for\n" \
2932 " the module and the alias.\n" \
2933 " A module can be aliased more than once.\n" \
2935 " options <mod_name|alias_name> <symbol=value...>\n" \
2936 " When loading module mod_name (or the module aliased by alias_name), pass\n" \
2937 " the \"symbol=value\" pairs as option to that module.\n" \
2939 "Sample /etc/modules.conf file:\n" \
2941 " options tulip irq=3\n" \
2942 " alias tulip tulip2\n" \
2943 " options tulip2 irq=4 io=0x308\n" \
2945 "Other functionality offered by 'classic' modprobe is not available in\n" \
2946 "this implementation.\n" \
2948 "If module options are present both in the config file, and on the command line,\n" \
2949 "then the options from the command line will be passed to the module _after_\n" \
2950 "the options from the config file. That way, you can have defaults in the config\n" \
2951 "file, and override them for a specific usage from the command line.\n"
2952 #define modprobe_example_usage \
2953 "(with the above /etc/modules.conf):\n\n" \
2954 "$ modprobe tulip\n" \
2955 " will load the module 'tulip' with default option 'irq=3'\n\n" \
2956 "$ modprobe tulip irq=5\n" \
2957 " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \
2958 "$ modprobe tulip2\n" \
2959 " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \
2960 " which are the default for alias 'tulip2'\n\n" \
2961 "$ modprobe tulip2 irq=8\n" \
2962 " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \
2963 " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \
2964 " from the command line\n\n" \
2965 "$ modprobe tulip2 irq=2 io=0x210\n" \
2966 " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \
2967 " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \
2968 " from the command line\n"
2970 #define more_trivial_usage \
2972 #define more_full_usage "\n\n" \
2973 "View FILE (or stdin) one screenful at a time"
2975 #define more_example_usage \
2978 #define mount_trivial_usage \
2979 "[OPTIONS] [-o OPTS] DEVICE NODE"
2980 #define mount_full_usage "\n\n" \
2981 "Mount a filesystem. Filesystem autodetection requires /proc.\n" \
2983 "\n -a Mount all filesystems in fstab" \
2984 IF_FEATURE_MOUNT_FAKE( \
2985 IF_FEATURE_MTAB_SUPPORT( \
2986 "\n -f Update /etc/mtab, but don't mount" \
2988 IF_NOT_FEATURE_MTAB_SUPPORT( \
2992 IF_FEATURE_MOUNT_HELPERS( \
2993 "\n -i Don't run mount helper" \
2995 IF_FEATURE_MTAB_SUPPORT( \
2996 "\n -n Don't update /etc/mtab" \
2998 "\n -r Read-only mount" \
2999 "\n -w Read-write mount (default)" \
3000 "\n -t FSTYPE Filesystem type" \
3001 "\n -O OPT Mount only filesystems with option OPT (-a only)" \
3003 IF_FEATURE_MOUNT_LOOP( \
3004 "\n loop Ignored (loop devices are autodetected)" \
3006 IF_FEATURE_MOUNT_FLAGS( \
3007 "\n [a]sync Writes are [a]synchronous" \
3008 "\n [no]atime Disable/enable updates to inode access times" \
3009 "\n [no]diratime Disable/enable atime updates to directories" \
3010 "\n [no]relatime Disable/enable atime updates relative to modification time" \
3011 "\n [no]dev (Dis)allow use of special device files" \
3012 "\n [no]exec (Dis)allow use of executable files" \
3013 "\n [no]suid (Dis)allow set-user-id-root programs" \
3014 "\n [r]shared Convert [recursively] to a shared subtree" \
3015 "\n [r]slave Convert [recursively] to a slave subtree" \
3016 "\n [r]private Convert [recursively] to a private subtree" \
3017 "\n [un]bindable Make mount point [un]able to be bind mounted" \
3018 "\n bind Bind a file or directory to another location" \
3019 "\n move Relocate an existing mount point" \
3021 "\n remount Remount a mounted filesystem, changing flags" \
3022 "\n ro/rw Same as -r/-w" \
3024 "\nThere are filesystem-specific -o flags." \
3026 #define mount_example_usage \
3028 "/dev/hda3 on / type minix (rw)\n" \
3029 "proc on /proc type proc (rw)\n" \
3030 "devpts on /dev/pts type devpts (rw)\n" \
3031 "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
3032 "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
3033 "$ mount cd_image.iso mydir\n"
3034 #define mount_notes_usage \
3035 "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
3037 #define mountpoint_trivial_usage \
3038 "[-q] <[-dn] DIR | -x DEVICE>"
3039 #define mountpoint_full_usage "\n\n" \
3040 "Check if the directory is a mountpoint\n" \
3043 "\n -d Print major/minor device number of the filesystem" \
3044 "\n -n Print device name of the filesystem" \
3045 "\n -x Print major/minor device number of the blockdevice" \
3047 #define mountpoint_example_usage \
3048 "$ mountpoint /proc\n" \
3049 "/proc is not a mountpoint\n" \
3050 "$ mountpoint /sys\n" \
3051 "/sys is a mountpoint\n"
3053 #define mt_trivial_usage \
3054 "[-f device] opcode value"
3055 #define mt_full_usage "\n\n" \
3056 "Control magnetic tape drive operation\n" \
3058 "Available Opcodes:\n" \
3060 "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
3061 "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
3062 "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
3063 "setpart tell unload unlock weof wset" \
3065 #define mv_trivial_usage \
3066 "[OPTIONS] SOURCE DEST\n" \
3067 "or: mv [OPTIONS] SOURCE... DIRECTORY"
3068 #define mv_full_usage "\n\n" \
3069 "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY\n" \
3071 "\n -f Don't prompt before overwriting" \
3072 "\n -i Interactive, prompt before overwrite" \
3074 #define mv_example_usage \
3075 "$ mv /tmp/foo /bin/bar\n"
3077 #define nameif_trivial_usage \
3078 "[-s] [-c FILE] [{IFNAME MACADDR}]"
3079 #define nameif_full_usage "\n\n" \
3080 "Rename network interface while it in the down state\n" \
3082 "\n -c FILE Use configuration file (default: /etc/mactab)" \
3083 "\n -s Use syslog (LOCAL0 facility)" \
3084 "\n IFNAME MACADDR new_interface_name interface_mac_address" \
3086 #define nameif_example_usage \
3087 "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
3089 "$ nameif -c /etc/my_mactab_file\n" \
3093 #if ENABLE_NC_SERVER || ENABLE_NC_EXTRA
3094 #define NC_OPTIONS_STR "\n\nOptions:"
3096 #define NC_OPTIONS_STR
3099 #define nc_trivial_usage \
3100 IF_NC_EXTRA("[-iN] [-wN] ")IF_NC_SERVER("[-l] [-p PORT] ") \
3101 "["IF_NC_EXTRA("-f FILENAME|")"IPADDR PORT]"IF_NC_EXTRA(" [-e PROG]")
3102 #define nc_full_usage "\n\n" \
3103 "Open a pipe to IP:port" IF_NC_EXTRA(" or file") \
3106 "\n -e PROG Run PROG after connect" \
3107 "\n -i SEC Delay interval for lines sent" \
3108 "\n -w SEC Timeout for connect" \
3109 "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \
3112 "\n -l Listen mode, for inbound connects" \
3114 "\n (use -l twice with -e for persistent server)") \
3115 "\n -p PORT Local port" \
3118 #define nc_notes_usage "" \
3120 "To use netcat as a terminal emulator on a serial port:\n\n" \
3121 "$ stty 115200 -F /dev/ttyS0\n" \
3122 "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
3125 #define nc_example_usage \
3126 "$ nc foobar.somedomain.com 25\n" \
3127 "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
3129 "214-Commands supported:\n" \
3130 "214- HELO EHLO MAIL RCPT DATA AUTH\n" \
3131 "214 NOOP QUIT RSET HELP\n" \
3133 "221 foobar closing connection\n"
3135 #else /* DESKTOP nc - much more compatible with nc 1.10 */
3137 #define nc_trivial_usage \
3138 "[OPTIONS] HOST PORT - connect" \
3140 "nc [OPTIONS] -l -p PORT [HOST] [PORT] - listen")
3141 #define nc_full_usage "\n\n" \
3143 "\n -e PROG Run PROG after connect (must be last)" \
3145 "\n -l Listen mode, for inbound connects" \
3147 "\n -n Don't do DNS resolution" \
3148 "\n -s ADDR Local address" \
3149 "\n -p PORT Local port" \
3152 "\n -w SEC Timeout for connects and final net reads" \
3154 "\n -i SEC Delay interval for lines sent" /* ", ports scanned" */ \
3155 "\n -o FILE Hex dump traffic" \
3156 "\n -z Zero-I/O mode (scanning)" \
3158 /* "\n -r Randomize local and remote ports" */
3159 /* "\n -g gateway Source-routing hop point[s], up to 8" */
3160 /* "\n -G num Source-routing pointer: 4, 8, 12, ..." */
3161 /* "\nport numbers can be individual or ranges: lo-hi [inclusive]" */
3163 /* -e PROG can take ARGS too: "nc ... -e ls -l", but we don't document it
3164 * in help text: nc 1.10 does not allow that. We don't want to entice
3165 * users to use this incompatibility */
3169 #define netstat_trivial_usage \
3170 "[-laentuwxr"IF_FEATURE_NETSTAT_WIDE("W")IF_FEATURE_NETSTAT_PRG("p")"]"
3171 #define netstat_full_usage "\n\n" \
3172 "Display networking information\n" \
3174 "\n -l Display listening server sockets" \
3175 "\n -a Display all sockets (default: connected)" \
3176 "\n -e Display other/more information" \
3177 "\n -n Don't resolve names" \
3178 "\n -t Tcp sockets" \
3179 "\n -u Udp sockets" \
3180 "\n -w Raw sockets" \
3181 "\n -x Unix sockets" \
3182 "\n -r Display routing table" \
3183 IF_FEATURE_NETSTAT_WIDE( \
3184 "\n -W Display with no column truncation" \
3186 IF_FEATURE_NETSTAT_PRG( \
3187 "\n -p Display PID/Program name for sockets" \
3190 #define nice_trivial_usage \
3191 "[-n ADJUST] [PROG ARGS]"
3192 #define nice_full_usage "\n\n" \
3193 "Run PROG with modified scheduling priority\n" \
3195 "\n -n ADJUST Adjust priority by ADJUST" \
3197 #define nmeter_trivial_usage \
3199 #define nmeter_full_usage "\n\n" \
3200 "Monitor system in real time\n\n" \
3201 "Format specifiers:\n" \
3202 " %Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \
3203 " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \
3204 " %[niface] Monitor network interface 'iface'\n" \
3205 " %m Monitor allocated memory\n" \
3206 " %[mf] Monitor free memory\n" \
3207 " %[mt] Monitor total memory\n" \
3208 " %s Monitor allocated swap\n" \
3209 " %f Monitor number of used file descriptors\n" \
3210 " %Ni Monitor total/specific IRQ rate\n" \
3211 " %x Monitor context switch rate\n" \
3212 " %p Monitor forks\n" \
3213 " %[pn] Monitor # of processes\n" \
3214 " %b Monitor block io\n" \
3215 " %Nt Show time (with N decimal points)\n" \
3216 " %Nd Milliseconds between updates (default:1000)\n" \
3217 " %r Print <cr> instead of <lf> at EOL" \
3219 #define nmeter_example_usage \
3220 "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
3222 #define nohup_trivial_usage \
3224 #define nohup_full_usage "\n\n" \
3225 "Run PROG immune to hangups, with output to a non-tty"
3226 #define nohup_example_usage \
3229 #define nslookup_trivial_usage \
3231 #define nslookup_full_usage "\n\n" \
3232 "Query the nameserver for the IP address of the given HOST\n" \
3233 "optionally using a specified DNS server"
3234 #define nslookup_example_usage \
3235 "$ nslookup localhost\n" \
3236 "Server: default\n" \
3237 "Address: default\n" \
3240 "Address: 127.0.0.1\n"
3242 #define ntpd_trivial_usage \
3243 "[-dnqwl] [-S PROG] [-p PEER]..."
3244 #define ntpd_full_usage "\n\n" \
3245 "NTP client/server\n" \
3248 "\n -n Do not daemonize" \
3249 "\n -q Quit after clock is set" \
3250 /* -N exists for mostly compat reasons, thus not essential to inform */ \
3251 /* the user that it exists: user may use nice as well */ \
3252 /* "\n -N Run at high priority" */ \
3253 "\n -w Do not set time (only query peers), implies -n" \
3254 "\n -l Run as server on port 123" \
3255 "\n -S PROG Run PROG after stepping time, stratum change, and every 11 mins" \
3256 "\n -p PEER Obtain time from PEER (may be repeated)" \
3258 #define od_trivial_usage \
3259 "[-aBbcDdeFfHhIiLlOovXx] " IF_DESKTOP("[-t TYPE] ") "[FILE]"
3260 #define od_full_usage "\n\n" \
3261 "Write an unambiguous representation, octal bytes by default, of FILE\n" \
3262 "(or stdin) to stdout"
3264 #define openvt_trivial_usage \
3265 "[-c N] [-sw] [PROG ARGS]"
3266 #define openvt_full_usage "\n\n" \
3267 "Start PROG on a new virtual terminal\n" \
3269 "\n -c N Use specified VT" \
3270 "\n -s Switch to the VT" \
3271 /* "\n -l Run PROG as login shell (by prepending '-')" */ \
3272 "\n -w Wait for PROG to exit" \
3274 #define openvt_example_usage \
3275 "openvt 2 /bin/ash\n"
3278 #define parse_trivial_usage \
3279 "[-n MAXTOKENS] [-m MINTOKENS] [-d DELIMS] [-f FLAGS] FILE..."
3280 #define parse_full_usage ""
3283 #define passwd_trivial_usage \
3285 #define passwd_full_usage "\n\n" \
3286 "Change USER's password. If no USER is specified,\n" \
3287 "changes the password for the current user.\n" \
3289 "\n -a Algorithm to use for password (des, md5)" /* ", sha1)" */ \
3290 "\n -d Delete password for the account" \
3291 "\n -l Lock (disable) account" \
3292 "\n -u Unlock (re-enable) account" \
3294 #define chpasswd_trivial_usage \
3295 IF_LONG_OPTS("[--md5|--encrypted]") IF_NOT_LONG_OPTS("[-m|-e]")
3296 #define chpasswd_full_usage "\n\n" \
3297 "Read user:password from stdin and update /etc/passwd\n" \
3300 "\n -e,--encrypted Supplied passwords are in encrypted form" \
3301 "\n -m,--md5 Use MD5 encryption instead of DES" \
3304 "\n -e Supplied passwords are in encrypted form" \
3305 "\n -m Use MD5 encryption instead of DES" \
3308 #define patch_trivial_usage \
3309 "[OPTIONS] [ORIGFILE [PATCHFILE]]"
3310 #define patch_full_usage "\n\n" \
3312 " -p,--strip N Strip N leading components from file names" \
3313 "\n -i,--input DIFF Read DIFF instead of stdin" \
3314 "\n -R,--reverse Reverse patch" \
3315 "\n -N,--forward Ignore already applied patches" \
3316 "\n --dry-run Don't actually change files" \
3319 " -p N Strip N leading components from file names" \
3320 "\n -i DIFF Read DIFF instead of stdin" \
3321 "\n -R Reverse patch" \
3322 "\n -N Ignore already applied patches" \
3325 #define patch_example_usage \
3326 "$ patch -p1 < example.diff\n" \
3327 "$ patch -p0 -i example.diff"
3329 #define pgrep_trivial_usage \
3330 "[-flnovx] [-s SID|-P PPID|PATTERN]"
3331 #define pgrep_full_usage "\n\n" \
3332 "Display process(es) selected by regex PATTERN\n" \
3334 "\n -l Show command name too" \
3335 "\n -f Match against entire command line" \
3336 "\n -n Show the newest process only" \
3337 "\n -o Show the oldest process only" \
3338 "\n -v Negate the match" \
3339 "\n -x Match whole name (not substring)" \
3340 "\n -s Match session ID (0 for current)" \
3341 "\n -P Match parent process ID" \
3343 #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
3344 #define pidof_trivial_usage \
3345 "[OPTIONS] [NAME]..."
3346 #define USAGE_PIDOF "\n\nOptions:"
3348 #define pidof_trivial_usage \
3350 #define USAGE_PIDOF /* none */
3352 #define pidof_full_usage "\n\n" \
3353 "List PIDs of all processes with names that match NAMEs" \
3355 IF_FEATURE_PIDOF_SINGLE( \
3356 "\n -s Show only one PID") \
3357 IF_FEATURE_PIDOF_OMIT( \
3358 "\n -o PID Omit given pid" \
3359 "\n Use %PPID to omit pid of pidof's parent") \
3361 #define pidof_example_usage \
3364 IF_FEATURE_PIDOF_OMIT( \
3365 "$ pidof /bin/sh\n20351 5973 5950\n") \
3366 IF_FEATURE_PIDOF_OMIT( \
3367 "$ pidof /bin/sh -o %PPID\n20351 5950")
3369 #if !ENABLE_FEATURE_FANCY_PING
3370 #define ping_trivial_usage \
3372 #define ping_full_usage "\n\n" \
3373 "Send ICMP ECHO_REQUEST packets to network hosts"
3374 #define ping6_trivial_usage \
3376 #define ping6_full_usage "\n\n" \
3377 "Send ICMP ECHO_REQUEST packets to network hosts"
3379 #define ping_trivial_usage \
3381 #define ping_full_usage "\n\n" \
3382 "Send ICMP ECHO_REQUEST packets to network hosts\n" \
3384 "\n -4, -6 Force IP or IPv6 name resolution" \
3385 "\n -c CNT Send only CNT pings" \
3386 "\n -s SIZE Send SIZE data bytes in packets (default:56)" \
3387 "\n -I IFACE/IP Use interface or IP address as source" \
3388 "\n -W SEC Seconds to wait for the first response (default:10)" \
3389 "\n (after all -c CNT packets are sent)" \
3390 "\n -w SEC Seconds until ping exits (default:infinite)" \
3391 "\n (can exit earlier with -c CNT)" \
3392 "\n -q Quiet, only displays output at start" \
3393 "\n and when finished" \
3395 #define ping6_trivial_usage \
3397 #define ping6_full_usage "\n\n" \
3398 "Send ICMP ECHO_REQUEST packets to network hosts\n" \
3400 "\n -c CNT Send only CNT pings" \
3401 "\n -s SIZE Send SIZE data bytes in packets (default:56)" \
3402 "\n -I IFACE/IP Use interface or IP address as source" \
3403 "\n -q Quiet, only displays output at start" \
3404 "\n and when finished" \
3407 #define ping_example_usage \
3408 "$ ping localhost\n" \
3409 "PING slag (127.0.0.1): 56 data bytes\n" \
3410 "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
3412 "--- debian ping statistics ---\n" \
3413 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
3414 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
3415 #define ping6_example_usage \
3416 "$ ping6 ip6-localhost\n" \
3417 "PING ip6-localhost (::1): 56 data bytes\n" \
3418 "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
3420 "--- ip6-localhost ping statistics ---\n" \
3421 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
3422 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
3424 #define pipe_progress_trivial_usage NOUSAGE_STR
3425 #define pipe_progress_full_usage ""
3427 #define pivot_root_trivial_usage \
3429 #define pivot_root_full_usage "\n\n" \
3430 "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
3431 "the new root file system"
3433 #define pkill_trivial_usage \
3434 "[-l|-SIGNAL] [-fnovx] [-s SID|-P PPID|PATTERN]"
3435 #define pkill_full_usage "\n\n" \
3436 "Send a signal to process(es) selected by regex PATTERN\n" \
3438 "\n -l List all signals" \
3439 "\n -f Match against entire command line" \
3440 "\n -n Signal the newest process only" \
3441 "\n -o Signal the oldest process only" \
3442 "\n -v Negate the match" \
3443 "\n -x Match whole name (not substring)" \
3444 "\n -s Match session ID (0 for current)" \
3445 "\n -P Match parent process ID" \
3447 #define popmaildir_trivial_usage \
3448 "[OPTIONS] MAILDIR [CONN_HELPER ARGS]"
3449 #define popmaildir_full_usage "\n\n" \
3450 "Fetch content of remote mailbox to local maildir\n" \
3452 /* "\n -b Binary mode. Ignored" */ \
3453 /* "\n -d Debug. Ignored" */ \
3454 /* "\n -m Show used memory. Ignored" */ \
3455 /* "\n -V Show version. Ignored" */ \
3456 /* "\n -c Use tcpclient. Ignored" */ \
3457 /* "\n -a Use APOP protocol. Implied. If server supports APOP -> use it" */ \
3458 "\n -s Skip authorization" \
3459 "\n -T Get messages with TOP instead with RETR" \
3460 "\n -k Keep retrieved messages on the server" \
3461 "\n -t SEC Network timeout" \
3462 IF_FEATURE_POPMAILDIR_DELIVERY( \
3463 "\n -F \"PROG ARGS\" Filter program. May be multiple" \
3464 "\n -M \"PROG ARGS\" Delivery program" \
3466 /* "\n -R BYTES Remove old messages on the server >= BYTES. Ignored" */
3467 /* "\n -Z N1-N2 Remove messages from N1 to N2 (dangerous). Ignored" */
3468 /* "\n -L BYTES Don't retrieve new messages >= BYTES. Ignored" */
3469 /* "\n -H LINES Type first LINES of a message. Ignored" */
3470 #define popmaildir_example_usage \
3471 "$ popmaildir -k ~/Maildir -- nc pop.drvv.ru 110 [<password_file]\n" \
3472 "$ popmaildir ~/Maildir -- openssl s_client -quiet -connect pop.gmail.com:995 [<password_file]\n"
3474 #define poweroff_trivial_usage \
3475 "[-d DELAY] [-n] [-f]"
3476 #define poweroff_full_usage "\n\n" \
3477 "Halt and shut off power\n" \
3479 "\n -d Delay interval for halting" \
3480 "\n -n No call to sync()" \
3481 "\n -f Force power off (don't go through init)" \
3483 #define printenv_trivial_usage \
3485 #define printenv_full_usage "\n\n" \
3486 "Print environment VARIABLEs.\n" \
3487 "If no VARIABLE specified, print all."
3489 #define printf_trivial_usage \
3490 "FORMAT [ARGUMENT]..."
3491 #define printf_full_usage "\n\n" \
3492 "Format and print ARGUMENT(s) according to FORMAT,\n" \
3493 "where FORMAT controls the output exactly as in C printf"
3494 #define printf_example_usage \
3495 "$ printf \"Val=%d\\n\" 5\n" \
3501 #define ps_trivial_usage \
3503 #define ps_full_usage "\n\n" \
3504 "Report process status\n" \
3506 "\n -o col1,col2=header Select columns for display" \
3507 IF_FEATURE_SHOW_THREADS( \
3508 "\n -T Show threads" \
3511 #else /* !ENABLE_DESKTOP */
3513 #if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE
3514 #define USAGE_PS "\nThis version of ps accepts no options"
3516 #define USAGE_PS "\nOptions:"
3519 #define ps_trivial_usage \
3521 #define ps_full_usage "\n\n" \
3522 "Report process status\n" \
3525 "\n -Z Show SE Linux context" \
3527 IF_FEATURE_PS_WIDE( \
3528 "\n w Wide output" \
3531 #endif /* ENABLE_DESKTOP */
3533 #define ps_example_usage \
3535 " PID Uid Gid State Command\n" \
3536 " 1 root root S init\n" \
3537 " 2 root root S [kflushd]\n" \
3538 " 3 root root S [kupdate]\n" \
3539 " 4 root root S [kpiod]\n" \
3540 " 5 root root S [kswapd]\n" \
3541 " 742 andersen andersen S [bash]\n" \
3542 " 743 andersen andersen S -bash\n" \
3543 " 745 root root S [getty]\n" \
3544 " 2990 andersen andersen R ps\n" \
3546 #define pscan_trivial_usage \
3547 "[-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST"
3548 #define pscan_full_usage "\n\n" \
3549 "Scan a host, print all open ports\n" \
3551 "\n -c Show closed ports too" \
3552 "\n -b Show blocked ports too" \
3553 "\n -p Scan from this port (default 1)" \
3554 "\n -P Scan up to this port (default 1024)" \
3555 "\n -t Timeout (default 5000 ms)" \
3556 "\n -T Minimum rtt (default 5 ms, increase for congested hosts)" \
3558 #define pwd_trivial_usage \
3560 #define pwd_full_usage "\n\n" \
3561 "Print the full filename of the current working directory"
3562 #define pwd_example_usage \
3566 #define raidautorun_trivial_usage \
3568 #define raidautorun_full_usage "\n\n" \
3569 "Tell the kernel to automatically search and start RAID arrays"
3570 #define raidautorun_example_usage \
3571 "$ raidautorun /dev/md0"
3573 #define rdate_trivial_usage \
3575 #define rdate_full_usage "\n\n" \
3576 "Get and possibly set the system date and time from a remote HOST\n" \
3578 "\n -s Set the system date and time (default)" \
3579 "\n -p Print the date and time" \
3581 #define rdev_trivial_usage \
3583 #define rdev_full_usage "\n\n" \
3584 "Print the device node associated with the filesystem mounted at '/'"
3585 #define rdev_example_usage \
3587 "/dev/mtdblock9 /\n"
3589 #define readahead_trivial_usage \
3591 #define readahead_full_usage "\n\n" \
3592 "Preload FILEs to RAM"
3594 #define readlink_trivial_usage \
3595 IF_FEATURE_READLINK_FOLLOW("[-fnv] ") "FILE"
3596 #define readlink_full_usage "\n\n" \
3597 "Display the value of a symlink" \
3598 IF_FEATURE_READLINK_FOLLOW( "\n" \
3600 "\n -f Canonicalize by following all symlinks" \
3601 "\n -n Don't add newline" \
3605 #define readprofile_trivial_usage \
3607 #define readprofile_full_usage "\n\n" \
3609 "\n -m mapfile (Default: /boot/System.map)" \
3610 "\n -p profile (Default: /proc/profile)" \
3611 "\n -M mult Set the profiling multiplier to mult" \
3612 "\n -i Print only info about the sampling step" \
3614 "\n -a Print all symbols, even if count is 0" \
3615 "\n -b Print individual histogram-bin counts" \
3616 "\n -s Print individual counters within functions" \
3617 "\n -r Reset all the counters (root only)" \
3618 "\n -n Disable byte order auto-detection" \
3620 #define realpath_trivial_usage \
3622 #define realpath_full_usage "\n\n" \
3623 "Return the absolute pathnames of given FILE"
3625 #define reboot_trivial_usage \
3626 "[-d DELAY] [-n] [-f]"
3627 #define reboot_full_usage "\n\n" \
3628 "Reboot the system\n" \
3630 "\n -d Delay interval for rebooting" \
3631 "\n -n No call to sync()" \
3632 "\n -f Force reboot (don't go through init)" \
3634 #define reformime_trivial_usage \
3635 "[OPTIONS] [FILE]..."
3636 #define reformime_full_usage "\n\n" \
3637 "Parse MIME-encoded message\n" \
3639 "\n -x PREFIX Extract content of MIME sections to files" \
3640 "\n -X PROG ARGS Filter content of MIME sections through PROG" \
3641 "\n Must be the last option" \
3643 "\nOther options are silently ignored" \
3645 #define renice_trivial_usage \
3646 "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]"
3647 #define renice_full_usage "\n\n" \
3648 "Change priority of running processes\n" \
3650 "\n -n Adjust current nice value (smaller is faster)" \
3651 "\n -p Process id(s) (default)" \
3652 "\n -g Process group id(s)" \
3653 "\n -u Process user name(s) and/or id(s)" \
3655 #define scriptreplay_trivial_usage \
3656 "timingfile [typescript [divisor]]"
3657 #define scriptreplay_full_usage "\n\n" \
3658 "Play back typescripts, using timing information"
3660 #define reset_trivial_usage \
3662 #define reset_full_usage "\n\n" \
3665 #define resize_trivial_usage \
3667 #define resize_full_usage "\n\n" \
3670 #define restorecon_trivial_usage \
3671 "[-iFnrRv] [-e excludedir]... [-o filename] [-f filename | pathname]"
3672 #define restorecon_full_usage "\n\n" \
3673 "Reset security contexts of files in pathname\n" \
3674 "\n -i Ignore files that don't exist" \
3675 "\n -f file File with list of files to process. Use - for stdin" \
3676 "\n -e directory Directory to exclude" \
3677 "\n -R,-r Recurse" \
3678 "\n -n Don't change any file labels" \
3679 "\n -o file Save list of files with incorrect context" \
3681 "\n -vv Show changed labels" \
3682 "\n -F Force reset of context to match file_context" \
3683 "\n for customizable files, or the user section," \
3684 "\n if it has changed" \
3686 #define rm_trivial_usage \
3688 #define rm_full_usage "\n\n" \
3689 "Remove (unlink) FILEs\n" \
3691 "\n -i Always prompt before removing" \
3692 "\n -f Never prompt" \
3693 "\n -R,-r Recurse" \
3695 #define rm_example_usage \
3696 "$ rm -rf /tmp/foo\n"
3698 #define rmdir_trivial_usage \
3699 "[OPTIONS] DIRECTORY..."
3700 #define rmdir_full_usage "\n\n" \
3701 "Remove DIRECTORY if it is empty\n" \
3703 IF_FEATURE_RMDIR_LONG_OPTIONS( \
3704 "\n -p|--parents Include parents" \
3705 "\n --ignore-fail-on-non-empty" \
3707 IF_NOT_FEATURE_RMDIR_LONG_OPTIONS( \
3708 "\n -p Include parents" \
3711 #define rmdir_example_usage \
3712 "# rmdir /tmp/foo\n"
3714 #define rmmod_trivial_usage \
3715 "[OPTIONS] [MODULE]..."
3716 #define rmmod_full_usage "\n\n" \
3717 "Unload the specified kernel modules from the kernel\n" \
3719 "\n -w Wait until the module is no longer used" \
3720 "\n -f Force unloading" \
3721 "\n -a Remove all unused modules (recursively)" \
3723 #define rmmod_example_usage \
3726 #define route_trivial_usage \
3727 "[{add|del|delete}]"
3728 #define route_full_usage "\n\n" \
3729 "Edit kernel routing tables\n" \
3731 "\n -n Don't resolve names" \
3732 "\n -e Display other/more information" \
3733 "\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family" \
3735 #define rpm_trivial_usage \
3736 "-i -q[ildc]p PACKAGE.rpm"
3737 #define rpm_full_usage "\n\n" \
3738 "Manipulate RPM packages\n" \
3740 "\n -i Install package" \
3741 "\n -q Query package" \
3742 "\n -p Query uninstalled package" \
3743 "\n -i Show information" \
3744 "\n -l List contents" \
3745 "\n -d List documents" \
3746 "\n -c List config files" \
3748 #define rpm2cpio_trivial_usage \
3750 #define rpm2cpio_full_usage "\n\n" \
3751 "Output a cpio archive of the rpm file"
3753 #define rtcwake_trivial_usage \
3754 "[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]"
3755 #define rtcwake_full_usage "\n\n" \
3756 "Enter a system sleep state until specified wakeup time\n" \
3758 "\n -a,--auto Read clock mode from adjtime" \
3759 "\n -l,--local Clock is set to local time" \
3760 "\n -u,--utc Clock is set to UTC time" \
3761 "\n -d,--device=DEV Specify the RTC device" \
3762 "\n -m,--mode=MODE Set the sleep state (default: standby)" \
3763 "\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \
3764 "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \
3767 "\n -a Read clock mode from adjtime" \
3768 "\n -l Clock is set to local time" \
3769 "\n -u Clock is set to UTC time" \
3770 "\n -d DEV Specify the RTC device" \
3771 "\n -m MODE Set the sleep state (default: standby)" \
3772 "\n -s SEC Set the timeout in SEC seconds from now" \
3773 "\n -t TIME Set the timeout to TIME seconds from epoch" \
3776 #define runcon_trivial_usage \
3777 "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG ARGS\n" \
3778 " runcon CONTEXT PROG ARGS"
3779 #define runcon_full_usage "\n\n" \
3780 "Run PROG in a different security context\n" \
3781 "\n CONTEXT Complete security context\n" \
3782 IF_FEATURE_RUNCON_LONG_OPTIONS( \
3783 "\n -c,--compute Compute process transition context before modifying" \
3784 "\n -t,--type=TYPE Type (for same role as parent)" \
3785 "\n -u,--user=USER User identity" \
3786 "\n -r,--role=ROLE Role" \
3787 "\n -l,--range=RNG Levelrange" \
3789 IF_NOT_FEATURE_RUNCON_LONG_OPTIONS( \
3790 "\n -c Compute process transition context before modifying" \
3791 "\n -t TYPE Type (for same role as parent)" \
3792 "\n -u USER User identity" \
3794 "\n -l RNG Levelrange" \
3797 #define run_parts_trivial_usage \
3798 "[-t] "IF_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
3799 #define run_parts_full_usage "\n\n" \
3800 "Run a bunch of scripts in DIRECTORY\n" \
3802 "\n -t Print what would be run, but don't actually run anything" \
3803 "\n -a ARG Pass ARG as argument for every program" \
3804 "\n -u MASK Set the umask to MASK before running every program" \
3805 IF_FEATURE_RUN_PARTS_FANCY( \
3806 "\n -l Print names of all matching files even if they are not executable" \
3809 #define run_parts_example_usage \
3810 "$ run-parts -a start /etc/init.d\n" \
3811 "$ run-parts -a stop=now /etc/init.d\n\n" \
3812 "Let's assume you have a script foo/dosomething:\n" \
3814 "for i in $*; do eval $i; done; unset i\n" \
3815 "case \"$1\" in\n" \
3816 "start*) echo starting something;;\n" \
3817 "stop*) set -x; shutdown -h $stop;;\n" \
3819 "Running this yields:\n" \
3820 "$run-parts -a stop=+4m foo/\n" \
3823 #define runlevel_trivial_usage \
3825 #define runlevel_full_usage "\n\n" \
3826 "Find the current and previous system runlevel\n" \
3828 "If no utmp FILE exists or if no runlevel record can be found,\n" \
3830 #define runlevel_example_usage \
3831 "$ runlevel /var/run/utmp\n" \
3834 #define runsv_trivial_usage \
3836 #define runsv_full_usage "\n\n" \
3837 "Start and monitor a service and optionally an appendant log service"
3839 #define runsvdir_trivial_usage \
3840 "[-P] [-s SCRIPT] DIR"
3841 #define runsvdir_full_usage "\n\n" \
3842 "Start a runsv process for each subdirectory. If it exits, restart it.\n" \
3843 "\n -P Put each runsv in a new session" \
3844 "\n -s SCRIPT Run SCRIPT <signo> after signal is processed" \
3846 #define rx_trivial_usage \
3848 #define rx_full_usage "\n\n" \
3849 "Receive a file using the xmodem protocol"
3850 #define rx_example_usage \
3853 #define script_trivial_usage \
3854 "[-afq" IF_SCRIPTREPLAY("t") "] [-c PROG] [OUTFILE]"
3855 #define script_full_usage "\n\n" \
3857 "\n -a Append output" \
3858 "\n -c Run PROG, not shell" \
3859 "\n -f Flush output after each write" \
3862 "\n -t Send timing to stderr" \
3865 #define sed_trivial_usage \
3866 "[-efinr] SED_CMD [FILE]..."
3867 #define sed_full_usage "\n\n" \
3869 "\n -e CMD Add CMD to sed commands to be executed" \
3870 "\n -f FILE Add FILE contents to sed commands to be executed" \
3871 "\n -i Edit files in-place (else sends result to stdout)" \
3872 "\n -n Suppress automatic printing of pattern space" \
3873 "\n -r Use extended regex syntax" \
3875 "\nIf no -e or -f, the first non-option argument is the sed command string." \
3876 "\nRemaining arguments are input files (stdin if none)."
3878 #define sed_example_usage \
3879 "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
3882 #define selinuxenabled_trivial_usage NOUSAGE_STR
3883 #define selinuxenabled_full_usage ""
3885 #define sendmail_trivial_usage \
3886 "[OPTIONS] [RECIPIENT_EMAIL]..."
3887 #define sendmail_full_usage "\n\n" \
3888 "Read email from stdin and send it\n" \
3889 "\nStandard options:" \
3890 "\n -t Read additional recipients from message body" \
3891 "\n -f sender Sender (required)" \
3892 "\n -o options Various options. -oi implied, others are ignored" \
3893 "\n -i -oi synonym. implied and ignored" \
3895 "\nBusybox specific options:" \
3896 "\n -w seconds Network timeout" \
3897 "\n -H 'PROG ARGS' Run connection helper" \
3899 "\n -H 'exec openssl s_client -quiet -tls1 -starttls smtp" \
3900 "\n -connect smtp.gmail.com:25' <email.txt" \
3901 "\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
3902 "\n -H 'exec openssl s_client -quiet -tls1" \
3903 "\n -connect smtp.gmail.com:465' <email.txt" \
3904 "\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
3905 "\n -S server[:port] Server" \
3906 "\n -au<username> Username for AUTH LOGIN" \
3907 "\n -ap<password> Password for AUTH LOGIN" \
3908 "\n -am<method> Authentication method. Ignored. LOGIN is implied" \
3910 "\nOther options are silently ignored; -oi -t is implied" \
3912 "\nUse makemime applet to create message with attachments" \
3915 #define seq_trivial_usage \
3916 "[-w] [-s SEP] [FIRST [INC]] LAST"
3917 #define seq_full_usage "\n\n" \
3918 "Print numbers from FIRST to LAST, in steps of INC.\n" \
3919 "FIRST, INC default to 1.\n" \
3921 "\n -w Pad to last with leading zeros" \
3922 "\n -s SEP String separator" \
3924 #define sestatus_trivial_usage \
3926 #define sestatus_full_usage "\n\n" \
3928 "\n -b Display current state of booleans" \
3930 #define setconsole_trivial_usage \
3931 "[-r" IF_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]"
3932 #define setconsole_full_usage "\n\n" \
3933 "Redirect system console output to DEVICE (default: /dev/tty)\n" \
3935 "\n -r Reset output to /dev/console" \
3937 #define setenforce_trivial_usage \
3938 "[Enforcing | Permissive | 1 | 0]"
3939 #define setenforce_full_usage ""
3941 #define setfiles_trivial_usage \
3942 "[-dnpqsvW] [-e DIR]... [-o FILE] [-r alt_root_path]" \
3943 IF_FEATURE_SETFILES_CHECK_OPTION( \
3944 " [-c policyfile] spec_file" \
3947 #define setfiles_full_usage "\n\n" \
3948 "Reset file contexts under pathname according to spec_file\n" \
3949 IF_FEATURE_SETFILES_CHECK_OPTION( \
3950 "\n -c FILE Check the validity of the contexts against the specified binary policy" \
3952 "\n -d Show which specification matched each file" \
3953 "\n -l Log changes in file labels to syslog" \
3954 "\n -n Don't change any file labels" \
3955 "\n -q Suppress warnings" \
3956 "\n -r DIR Use an alternate root path" \
3957 "\n -e DIR Exclude DIR" \
3958 "\n -F Force reset of context to match file_context for customizable files" \
3959 "\n -o FILE Save list of files with incorrect context" \
3960 "\n -s Take a list of files from stdin (instead of command line)" \
3961 "\n -v Show changes in file labels, if type or role are changing" \
3962 "\n -vv Show changes in file labels, if type, role, or user are changing" \
3963 "\n -W Display warnings about entries that had no matching files" \
3965 #define setfont_trivial_usage \
3966 "FONT [-m MAPFILE] [-C TTY]"
3967 #define setfont_full_usage "\n\n" \
3968 "Load a console font\n" \
3970 "\n -m MAPFILE Load console screen map" \
3971 "\n -C TTY Affect TTY instead of /dev/tty" \
3973 #define setfont_example_usage \
3974 "$ setfont -m koi8-r /etc/i18n/fontname\n"
3976 #define setkeycodes_trivial_usage \
3977 "SCANCODE KEYCODE..."
3978 #define setkeycodes_full_usage "\n\n" \
3979 "Set entries into the kernel's scancode-to-keycode map,\n" \
3980 "allowing unusual keyboards to generate usable keycodes.\n\n" \
3981 "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
3982 "and KEYCODE is given in decimal." \
3984 #define setkeycodes_example_usage \
3985 "$ setkeycodes e030 127\n"
3987 #define setlogcons_trivial_usage \
3989 #define setlogcons_full_usage "\n\n" \
3990 "Redirect the kernel output to console N (0 for current)"
3992 #define setsebool_trivial_usage \
3995 #define setsebool_full_usage "\n\n" \
3996 "Change boolean setting"
3998 #define setsid_trivial_usage \
4000 #define setsid_full_usage "\n\n" \
4001 "Run PROG in a new session. PROG will have no controlling terminal\n" \
4002 "and will not be affected by keyboard signals (Ctrl-C etc).\n" \
4003 "See setsid(2) for details." \
4005 #define last_trivial_usage \
4006 ""IF_FEATURE_LAST_FANCY("[-HW] [-f file]")
4007 #define last_full_usage "\n\n" \
4008 "Show listing of the last users that logged into the system" \
4009 IF_FEATURE_LAST_FANCY( "\n" \
4011 /* "\n -H Show header line" */ \
4012 "\n -W Display with no host column truncation" \
4013 "\n -f file Read from file instead of /var/log/wtmp" \
4016 #define showkey_trivial_usage \
4018 #define showkey_full_usage "\n\n" \
4019 "Show keys pressed\n" \
4021 "\n -a Display decimal/octal/hex values of the keys" \
4022 "\n -k Display interpreted keycodes (default)" \
4023 "\n -s Display raw scan-codes" \
4025 #define slattach_trivial_usage \
4026 "[-cehmLF] [-s SPEED] [-p PROTOCOL] DEVICE"
4027 #define slattach_full_usage "\n\n" \
4028 "Attach network interface(s) to serial line(s)\n" \
4030 "\n -p PROT Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \
4031 "\n -s SPD Set line speed" \
4032 "\n -e Exit after initializing device" \
4033 "\n -h Exit when the carrier is lost" \
4034 "\n -c PROG Run PROG when the line is hung up" \
4035 "\n -m Do NOT initialize the line in raw 8 bits mode" \
4036 "\n -L Enable 3-wire operation" \
4037 "\n -F Disable RTS/CTS flow control" \
4039 #define sleep_trivial_usage \
4040 IF_FEATURE_FANCY_SLEEP("[") "N" IF_FEATURE_FANCY_SLEEP("]...")
4041 #define sleep_full_usage "\n\n" \
4042 IF_NOT_FEATURE_FANCY_SLEEP("Pause for N seconds") \
4043 IF_FEATURE_FANCY_SLEEP( \
4044 "Pause for a time equal to the total of the args given, where each arg can\n" \
4045 "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays")
4046 #define sleep_example_usage \
4048 "[2 second delay results]\n" \
4049 IF_FEATURE_FANCY_SLEEP( \
4050 "$ sleep 1d 3h 22m 8s\n" \
4051 "[98528 second delay results]\n")
4053 #define sort_trivial_usage \
4055 IF_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \
4057 #define sort_full_usage "\n\n" \
4058 "Sort lines of text\n" \
4060 IF_FEATURE_SORT_BIG( \
4061 "\n -b Ignore leading blanks" \
4062 "\n -c Check whether input is sorted" \
4063 "\n -d Dictionary order (blank or alphanumeric only)" \
4064 "\n -f Ignore case" \
4065 "\n -g General numerical sort" \
4066 "\n -i Ignore unprintable characters" \
4068 "\n -M Sort month" \
4070 "\n -n Sort numbers" \
4071 IF_FEATURE_SORT_BIG( \
4072 "\n -o Output to file" \
4073 "\n -k Sort by key" \
4074 "\n -t CHAR Key separator" \
4076 "\n -r Reverse sort order" \
4077 IF_FEATURE_SORT_BIG( \
4078 "\n -s Stable (don't sort ties alphabetically)" \
4080 "\n -u Suppress duplicate lines" \
4081 IF_FEATURE_SORT_BIG( \
4082 "\n -z Lines are terminated by NUL, not newline" \
4083 "\n -mST Ignored for GNU compatibility") \
4085 #define sort_example_usage \
4086 "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
4093 IF_FEATURE_SORT_BIG( \
4094 "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \
4101 #define split_trivial_usage \
4102 "[OPTIONS] [INPUT [PREFIX]]"
4103 #define split_full_usage "\n\n" \
4105 "\n -b n[k|m] Split by bytes" \
4106 "\n -l n Split by lines" \
4107 "\n -a n Use n letters as suffix" \
4109 #define split_example_usage \
4110 "$ split TODO foo\n" \
4111 "$ cat TODO | split -a 2 -l 2 TODO_\n"
4113 #define start_stop_daemon_trivial_usage \
4114 "[OPTIONS] [-S|-K] ... [-- ARGS...]"
4115 #define start_stop_daemon_full_usage "\n\n" \
4116 "Search for matching processes, and then\n" \
4117 "-K: stop all matching processes.\n" \
4118 "-S: start a process unless a matching process is found.\n" \
4119 IF_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
4120 "\nProcess matching:" \
4121 "\n -u,--user USERNAME|UID Match only this user's processes" \
4122 "\n -n,--name NAME Match processes with NAME" \
4123 "\n in comm field in /proc/PID/stat" \
4124 "\n -x,--exec EXECUTABLE Match processes with this command" \
4125 "\n in /proc/PID/cmdline" \
4126 "\n -p,--pidfile FILE Match a process with PID from the file" \
4127 "\n All specified conditions must match" \
4129 "\n -x,--exec EXECUTABLE Program to run" \
4130 "\n -a,--startas NAME Zeroth argument" \
4131 "\n -b,--background Background" \
4132 IF_FEATURE_START_STOP_DAEMON_FANCY( \
4133 "\n -N,--nicelevel N Change nice level" \
4135 "\n -c,--chuid USER[:[GRP]] Change to user/group" \
4136 "\n -m,--make-pidfile Write PID to the pidfile specified by -p" \
4138 "\n -s,--signal SIG Signal to send" \
4139 "\n -t,--test Match only, exit with 0 if a process is found" \
4141 IF_FEATURE_START_STOP_DAEMON_FANCY( \
4142 "\n -o,--oknodo Exit with status 0 if nothing is done" \
4143 "\n -v,--verbose Verbose" \
4145 "\n -q,--quiet Quiet" \
4147 IF_NOT_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
4148 "\nProcess matching:" \
4149 "\n -u USERNAME|UID Match only this user's processes" \
4150 "\n -n NAME Match processes with NAME" \
4151 "\n in comm field in /proc/PID/stat" \
4152 "\n -x EXECUTABLE Match processes with this command" \
4153 "\n command in /proc/PID/cmdline" \
4154 "\n -p FILE Match a process with PID from the file" \
4155 "\n All specified conditions must match" \
4157 "\n -x EXECUTABLE Program to run" \
4158 "\n -a NAME Zeroth argument" \
4159 "\n -b Background" \
4160 IF_FEATURE_START_STOP_DAEMON_FANCY( \
4161 "\n -N N Change nice level" \
4163 "\n -c USER[:[GRP]] Change to user/group" \
4164 "\n -m Write PID to the pidfile specified by -p" \
4166 "\n -s SIG Signal to send" \
4167 "\n -t Match only, exit with 0 if a process is found" \
4169 IF_FEATURE_START_STOP_DAEMON_FANCY( \
4170 "\n -o Exit with status 0 if nothing is done" \
4176 #define stat_trivial_usage \
4178 #define stat_full_usage "\n\n" \
4179 "Display file (default) or filesystem status\n" \
4181 IF_FEATURE_STAT_FORMAT( \
4182 "\n -c fmt Use the specified format" \
4184 "\n -f Display filesystem status" \
4185 "\n -L Follow links" \
4186 "\n -t Display info in terse form" \
4188 "\n -Z Print security context" \
4190 IF_FEATURE_STAT_FORMAT( \
4191 "\n\nValid format sequences for files:\n" \
4192 " %a Access rights in octal\n" \
4193 " %A Access rights in human readable form\n" \
4194 " %b Number of blocks allocated (see %B)\n" \
4195 " %B The size in bytes of each block reported by %b\n" \
4196 " %d Device number in decimal\n" \
4197 " %D Device number in hex\n" \
4198 " %f Raw mode in hex\n" \
4200 " %g Group ID of owner\n" \
4201 " %G Group name of owner\n" \
4202 " %h Number of hard links\n" \
4203 " %i Inode number\n" \
4205 " %N File name, with -> TARGET if symlink\n" \
4206 " %o I/O block size\n" \
4207 " %s Total size, in bytes\n" \
4208 " %t Major device type in hex\n" \
4209 " %T Minor device type in hex\n" \
4210 " %u User ID of owner\n" \
4211 " %U User name of owner\n" \
4212 " %x Time of last access\n" \
4213 " %X Time of last access as seconds since Epoch\n" \
4214 " %y Time of last modification\n" \
4215 " %Y Time of last modification as seconds since Epoch\n" \
4216 " %z Time of last change\n" \
4217 " %Z Time of last change as seconds since Epoch\n" \
4218 "\nValid format sequences for file systems:\n" \
4219 " %a Free blocks available to non-superuser\n" \
4220 " %b Total data blocks in file system\n" \
4221 " %c Total file nodes in file system\n" \
4222 " %d Free file nodes in file system\n" \
4223 " %f Free blocks in file system\n" \
4225 " %C Security context in SELinux\n" \
4227 " %i File System ID in hex\n" \
4228 " %l Maximum length of filenames\n" \
4230 " %s Block size (for faster transfer)\n" \
4231 " %S Fundamental block size (for block counts)\n" \
4232 " %t Type in hex\n" \
4233 " %T Type in human readable form" \
4236 #define strings_trivial_usage \
4237 "[-afo] [-n LEN] [FILE]..."
4238 #define strings_full_usage "\n\n" \
4239 "Display printable strings in a binary file\n" \
4241 "\n -a Scan whole file (default)" \
4242 "\n -f Precede strings with filenames" \
4243 "\n -n LEN At least LEN characters form a string (default 4)" \
4244 "\n -o Precede strings with decimal offsets" \
4246 #define stty_trivial_usage \
4247 "[-a|g] [-F DEVICE] [SETTING]..."
4248 #define stty_full_usage "\n\n" \
4249 "Without arguments, prints baud rate, line discipline,\n" \
4250 "and deviations from stty sane\n" \
4252 "\n -F DEVICE Open device instead of stdin" \
4253 "\n -a Print all current settings in human-readable form" \
4254 "\n -g Print in stty-readable form" \
4255 "\n [SETTING] See manpage" \
4257 #define su_trivial_usage \
4258 "[OPTIONS] [-] [USERNAME]"
4259 #define su_full_usage "\n\n" \
4260 "Change user id or become root\n" \
4262 "\n -p,-m Preserve environment" \
4263 "\n -c CMD Command to pass to 'sh -c'" \
4264 "\n -s SH Shell to use instead of default shell" \
4266 #define sulogin_trivial_usage \
4268 #define sulogin_full_usage "\n\n" \
4269 "Single user login\n" \
4273 #define sum_trivial_usage \
4275 #define sum_full_usage "\n\n" \
4276 "Checksum and count the blocks in a file\n" \
4278 "\n -r Use BSD sum algorithm (1K blocks)" \
4279 "\n -s Use System V sum algorithm (512byte blocks)" \
4281 #define sv_trivial_usage \
4282 "[-v] [-w SEC] CMD SERVICE_DIR..."
4283 #define sv_full_usage "\n\n" \
4284 "Control services monitored by runsv supervisor.\n" \
4285 "Commands (only first character is enough):\n" \
4287 "status: query service status\n" \
4288 "up: if service isn't running, start it. If service stops, restart it\n" \
4289 "once: like 'up', but if service stops, don't restart it\n" \
4290 "down: send TERM and CONT signals. If ./run exits, start ./finish\n" \
4291 " if it exists. After it stops, don't restart service\n" \
4292 "exit: send TERM and CONT signals to service and log service. If they exit,\n" \
4293 " runsv exits too\n" \
4294 "pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \
4295 "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \
4297 #define svlogd_trivial_usage \
4298 "[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..."
4299 #define svlogd_full_usage "\n\n" \
4300 "Continuously read log data from stdin, optionally\n" \
4301 "filter log messages, and write the data to one or more automatically\n" \
4304 #define swapoff_trivial_usage \
4306 #define swapoff_full_usage "\n\n" \
4307 "Stop swapping on DEVICE\n" \
4309 "\n -a Stop swapping on all swap devices" \
4311 #define swapon_trivial_usage \
4312 "[-a]" IF_FEATURE_SWAPON_PRI(" [-p PRI]") " [DEVICE]"
4313 #define swapon_full_usage "\n\n" \
4314 "Start swapping on DEVICE\n" \
4316 "\n -a Start swapping on all swap devices" \
4317 IF_FEATURE_SWAPON_PRI( \
4318 "\n -p PRI Set swap device priority" \
4321 #define switch_root_trivial_usage \
4322 "[-c /dev/console] NEW_ROOT NEW_INIT [ARGS]"
4323 #define switch_root_full_usage "\n\n" \
4324 "Free initramfs and switch to another root fs:\n" \
4325 "chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,\n" \
4326 "execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.\n" \
4328 "\n -c DEV Reopen stdio to DEV after switch" \
4330 #define sync_trivial_usage \
4332 #define sync_full_usage "\n\n" \
4333 "Write all buffered blocks to disk"
4335 #define fsync_trivial_usage \
4337 #define fsync_full_usage "\n\n" \
4338 "Write files' buffered blocks to disk\n" \
4340 "\n -d Avoid syncing metadata"
4342 #define sysctl_trivial_usage \
4343 "[OPTIONS] [VALUE]..."
4344 #define sysctl_full_usage "\n\n" \
4345 "Configure kernel parameters at runtime\n" \
4347 "\n -n Don't print key names" \
4348 "\n -e Don't warn about unknown keys" \
4349 "\n -w Change sysctl setting" \
4350 "\n -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)" \
4351 "\n -a Display all values" \
4352 "\n -A Display all values in table form" \
4354 #define sysctl_example_usage \
4355 "sysctl [-n] [-e] variable...\n" \
4356 "sysctl [-n] [-e] -w variable=value...\n" \
4357 "sysctl [-n] [-e] -a\n" \
4358 "sysctl [-n] [-e] -p file (default /etc/sysctl.conf)\n" \
4359 "sysctl [-n] [-e] -A\n"
4361 #define syslogd_trivial_usage \
4363 #define syslogd_full_usage "\n\n" \
4364 "System logging utility.\n" \
4365 "This version of syslogd ignores /etc/syslog.conf\n" \
4367 "\n -n Run in foreground" \
4368 "\n -O FILE Log to given file (default:/var/log/messages)" \
4369 "\n -l N Set local log level" \
4370 "\n -S Smaller logging output" \
4371 IF_FEATURE_ROTATE_LOGFILE( \
4372 "\n -s SIZE Max size (KB) before rotate (default:200KB, 0=off)" \
4373 "\n -b N N rotated logs to keep (default:1, max=99, 0=purge)") \
4374 IF_FEATURE_REMOTE_LOG( \
4375 "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
4376 "\n -L Log locally and via network (default is network only if -R)") \
4377 IF_FEATURE_SYSLOGD_DUP( \
4378 "\n -D Drop duplicates") \
4379 IF_FEATURE_IPC_SYSLOG( \
4380 "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") \
4381 /* NB: -Csize shouldn't have space (because size is optional) */
4382 /* "\n -m MIN Minutes between MARK lines (default:20, 0=off)" */
4384 #define syslogd_example_usage \
4385 "$ syslogd -R masterlog:514\n" \
4386 "$ syslogd -R 192.168.1.1:601\n"
4388 #define tac_trivial_usage \
4390 #define tac_full_usage "\n\n" \
4391 "Concatenate FILEs and print them in reverse"
4393 #define tail_trivial_usage \
4394 "[OPTIONS] [FILE]..."
4395 #define tail_full_usage "\n\n" \
4396 "Print last 10 lines of each FILE (or stdin) to stdout.\n" \
4397 "With more than one FILE, precede each with a header giving the file name.\n" \
4399 IF_FEATURE_FANCY_TAIL( \
4400 "\n -c N[kbm] Output last N bytes") \
4401 "\n -n N[kbm] Print last N lines instead of last 10" \
4402 "\n -f Output data as the file grows" \
4403 IF_FEATURE_FANCY_TAIL( \
4404 "\n -q Never output headers giving file names" \
4405 "\n -s SEC Wait SEC seconds between reads with -f" \
4406 "\n -v Always output headers giving file names" \
4408 "\nIf the first character of N (bytes or lines) is a '+', output begins with" \
4409 "\nthe Nth item from the start of each file, otherwise, print the last N items" \
4410 "\nin the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) \
4412 #define tail_example_usage \
4413 "$ tail -n 1 /etc/resolv.conf\n" \
4414 "nameserver 10.0.0.1\n"
4416 #define tar_trivial_usage \
4417 "-[" IF_FEATURE_TAR_CREATE("c") "xt" IF_FEATURE_SEAMLESS_GZ("z") \
4418 IF_FEATURE_SEAMLESS_BZ2("j") IF_FEATURE_SEAMLESS_LZMA("a") \
4419 IF_FEATURE_SEAMLESS_Z("Z") IF_FEATURE_TAR_NOPRESERVE_TIME("m") "vO] " \
4420 IF_FEATURE_TAR_FROM("[-X FILE] ") \
4421 "[-f TARFILE] [-C DIR] [FILE]..."
4422 #define tar_full_usage "\n\n" \
4423 IF_FEATURE_TAR_CREATE("Create, extract, ") \
4424 IF_NOT_FEATURE_TAR_CREATE("Extract ") \
4425 "or list files from a tar file\n" \
4427 IF_FEATURE_TAR_CREATE( \
4432 "\nArchive format selection:" \
4433 IF_FEATURE_SEAMLESS_GZ( \
4434 "\n z Filter the archive through gzip" \
4436 IF_FEATURE_SEAMLESS_BZ2( \
4437 "\n j Filter the archive through bzip2" \
4439 IF_FEATURE_SEAMLESS_LZMA( \
4440 "\n a Filter the archive through lzma" \
4442 IF_FEATURE_SEAMLESS_Z( \
4443 "\n Z Filter the archive through compress" \
4445 IF_FEATURE_TAR_NOPRESERVE_TIME( \
4446 "\n m Do not restore mtime" \
4448 "\nFile selection:" \
4449 "\n f Name of TARFILE or \"-\" for stdin" \
4450 "\n O Extract to stdout" \
4451 IF_FEATURE_TAR_FROM( \
4452 IF_FEATURE_TAR_LONG_OPTIONS( \
4453 "\n exclude File to exclude" \
4455 "\n X File with names to exclude" \
4457 "\n C Change to DIR before operation" \
4460 #define tar_example_usage \
4461 "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
4462 "$ tar -cf /tmp/tarball.tar /usr/local\n"
4464 #define taskset_trivial_usage \
4465 "[-p] [MASK] [PID | PROG ARGS]"
4466 #define taskset_full_usage "\n\n" \
4467 "Set or get CPU affinity\n" \
4469 "\n -p Operate on an existing PID" \
4471 #define taskset_example_usage \
4472 "$ taskset 0x7 ./dgemm_test&\n" \
4473 "$ taskset -p 0x1 $!\n" \
4474 "pid 4790's current affinity mask: 7\n" \
4475 "pid 4790's new affinity mask: 1\n" \
4476 "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
4477 "pid 6671's current affinity mask: 1\n" \
4478 "pid 6671's new affinity mask: 1\n" \
4479 "$ taskset -p 1\n" \
4480 "pid 1's current affinity mask: 3\n"
4482 #define tee_trivial_usage \
4483 "[OPTIONS] [FILE]..."
4484 #define tee_full_usage "\n\n" \
4485 "Copy stdin to each FILE, and also to stdout\n" \
4487 "\n -a Append to the given FILEs, don't overwrite" \
4488 "\n -i Ignore interrupt signals (SIGINT)" \
4490 #define tee_example_usage \
4491 "$ echo \"Hello\" | tee /tmp/foo\n" \
4492 "$ cat /tmp/foo\n" \
4495 #if ENABLE_FEATURE_TELNET_AUTOLOGIN
4496 #define telnet_trivial_usage \
4497 "[-a] [-l USER] HOST [PORT]"
4498 #define telnet_full_usage "\n\n" \
4499 "Connect to telnet server\n" \
4501 "\n -a Automatic login with $USER variable" \
4502 "\n -l USER Automatic login as USER" \
4505 #define telnet_trivial_usage \
4507 #define telnet_full_usage "\n\n" \
4508 "Connect to telnet server"
4511 #define telnetd_trivial_usage \
4513 #define telnetd_full_usage "\n\n" \
4514 "Handle incoming telnet connections" \
4515 IF_NOT_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \
4517 "\n -l LOGIN Exec LOGIN on connect" \
4518 "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
4519 "\n -K Close connection as soon as login exits" \
4520 "\n (normally wait until all programs close slave pty)" \
4521 IF_FEATURE_TELNETD_STANDALONE( \
4522 "\n -p PORT Port to listen on" \
4523 "\n -b ADDR[:PORT] Address to bind to" \
4524 "\n -F Run in foreground" \
4525 "\n -i Inetd mode" \
4526 IF_FEATURE_TELNETD_INETD_WAIT( \
4527 "\n -w SEC Inetd 'wait' mode, linger time SEC" \
4528 "\n -S Log to syslog (implied by -i or without -F and -w)" \
4532 /* "test --help" does not print help (POSIX compat), only "[ --help" does.
4533 * We display "<applet> EXPRESSION ]" here (not "<applet> EXPRESSION")
4534 * Unfortunately, it screws up generated BusyBox.html. TODO. */
4535 #define test_trivial_usage \
4537 #define test_full_usage "\n\n" \
4538 "Check file types, compare values etc. Return a 0/1 exit code\n" \
4539 "depending on logical value of EXPRESSION"
4540 #define test_example_usage \
4541 "$ test 1 -eq 2\n" \
4544 "$ test 1 -eq 1\n" \
4550 "$ [ -d /junk ]\n" \
4554 #define tc_trivial_usage \
4555 /*"[OPTIONS] "*/"OBJECT CMD [dev STRING]"
4556 #define tc_full_usage "\n\n" \
4557 "OBJECT: {qdisc|class|filter}\n" \
4558 "CMD: {add|del|change|replace|show}\n" \
4560 "qdisc [ handle QHANDLE ] [ root |"IF_FEATURE_TC_INGRESS(" ingress |")" parent CLASSID ]\n" \
4561 /* "[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
4562 " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
4563 " QDISC_KIND := { [p|b]fifo | tbf | prio | cbq | red | etc. }\n" \
4564 "qdisc show [ dev STRING ]"IF_FEATURE_TC_INGRESS(" [ingress]")"\n" \
4565 "class [ classid CLASSID ] [ root | parent CLASSID ]\n" \
4566 " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
4567 "class show [ dev STRING ] [ root | parent CLASSID ]\n" \
4568 "filter [ pref PRIO ] [ protocol PROTO ]\n" \
4569 /* "\t[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
4570 " [ root | classid CLASSID ] [ handle FILTERID ]\n" \
4571 " [ [ FILTER_TYPE ] [ help | OPTIONS ] ]\n" \
4572 "filter show [ dev STRING ] [ root | parent CLASSID ]"
4574 #define tcpsvd_trivial_usage \
4575 "[-hEv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] IP PORT PROG"
4576 /* with not-implemented options: */
4577 /* "[-hpEvv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] [-i DIR|-x CDB] [-t SEC] IP PORT PROG" */
4578 #define tcpsvd_full_usage "\n\n" \
4579 "Create TCP socket, bind to IP:PORT and listen\n" \
4580 "for incoming connection. Run PROG for each connection.\n" \
4581 "\n IP IP to listen on. '0' = all" \
4582 "\n PORT Port to listen on" \
4583 "\n PROG ARGS Program to run" \
4584 "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
4585 "\n -u USER[:GRP] Change to user/group after bind" \
4586 "\n -c N Handle up to N connections simultaneously" \
4587 "\n -b N Allow a backlog of approximately N TCP SYNs" \
4588 "\n -C N[:MSG] Allow only up to N connections from the same IP" \
4589 "\n New connections from this IP address are closed" \
4590 "\n immediately. MSG is written to the peer before close" \
4591 "\n -h Look up peer's hostname" \
4592 "\n -E Don't set up environment variables" \
4595 #define udpsvd_trivial_usage \
4596 "[-hEv] [-c N] [-u USER] [-l NAME] IP PORT PROG"
4597 #define udpsvd_full_usage "\n\n" \
4598 "Create UDP socket, bind to IP:PORT and wait\n" \
4599 "for incoming packets. Run PROG for each packet,\n" \
4600 "redirecting all further packets with same peer ip:port to it.\n" \
4601 "\n IP IP to listen on. '0' = all" \
4602 "\n PORT Port to listen on" \
4603 "\n PROG ARGS Program to run" \
4604 "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
4605 "\n -u USER[:GRP] Change to user/group after bind" \
4606 "\n -c N Handle up to N connections simultaneously" \
4607 "\n -h Look up peer's hostname" \
4608 "\n -E Don't set up environment variables" \
4611 #define tftp_trivial_usage \
4612 "[OPTIONS] HOST [PORT]"
4613 #define tftp_full_usage "\n\n" \
4614 "Transfer a file from/to tftp server\n" \
4616 "\n -l FILE Local FILE" \
4617 "\n -r FILE Remote FILE" \
4618 IF_FEATURE_TFTP_GET( \
4621 IF_FEATURE_TFTP_PUT( \
4624 IF_FEATURE_TFTP_BLOCKSIZE( \
4625 "\n -b SIZE Transfer blocks of SIZE octets" \
4628 #define tftpd_trivial_usage \
4629 "[-cr] [-u USER] [DIR]"
4630 #define tftpd_full_usage "\n\n" \
4631 "Transfer a file on tftp client's request\n" \
4633 "tftpd should be used as an inetd service.\n" \
4634 "tftpd's line for inetd.conf:\n" \
4635 " 69 dgram udp nowait root tftpd tftpd /files/to/serve\n" \
4636 "It also can be ran from udpsvd:\n" \
4637 " udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve\n" \
4639 "\n -r Prohibit upload" \
4640 "\n -c Allow file creation via upload" \
4641 "\n -u Access files as USER" \
4643 #define time_trivial_usage \
4644 "[OPTIONS] PROG ARGS"
4645 #define time_full_usage "\n\n" \
4646 "Run PROG, display resource usage when it exits\n" \
4650 #define timeout_trivial_usage \
4651 "[-t SECS] [-s SIG] PROG ARGS"
4652 #define timeout_full_usage "\n\n" \
4653 "Runs PROG. Sends SIG to it if it is not gone in SECS seconds.\n" \
4654 "Defaults: SECS: 10, SIG: TERM." \
4656 #define top_trivial_usage \
4657 "[-b] [-nCOUNT] [-dSECONDS]" IF_FEATURE_TOPMEM(" [-m]")
4658 #define top_full_usage "\n\n" \
4659 "Provide a view of process activity in real time.\n" \
4660 "Read the status of all processes from /proc each SECONDS\n" \
4661 "and display a screenful of them." \
4662 //TODO: add options and keyboard commands
4664 #define touch_trivial_usage \
4665 "[-c] [-d DATE] FILE [FILE]..."
4666 #define touch_full_usage "\n\n" \
4667 "Update the last-modified date on the given FILE[s]\n" \
4669 "\n -c Don't create files" \
4670 "\n -d DT Date/time to use" \
4672 #define touch_example_usage \
4673 "$ ls -l /tmp/foo\n" \
4674 "/bin/ls: /tmp/foo: No such file or directory\n" \
4675 "$ touch /tmp/foo\n" \
4676 "$ ls -l /tmp/foo\n" \
4677 "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
4679 #define tr_trivial_usage \
4680 "[-cds] STRING1 [STRING2]"
4681 #define tr_full_usage "\n\n" \
4682 "Translate, squeeze, or delete characters from stdin, writing to stdout\n" \
4684 "\n -c Take complement of STRING1" \
4685 "\n -d Delete input characters coded STRING1" \
4686 "\n -s Squeeze multiple output characters of STRING2 into one character" \
4688 #define tr_example_usage \
4689 "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
4692 #define traceroute_trivial_usage \
4693 "[-"IF_TRACEROUTE6("46")"FIldnrv] [-f 1ST_TTL] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
4694 " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-g GATEWAY] [-i IFACE]\n" \
4695 " [-z PAUSE_MSEC] HOST [BYTES]"
4696 #define traceroute_full_usage "\n\n" \
4697 "Trace the route to HOST\n" \
4700 "\n -4, -6 Force IP or IPv6 name resolution" \
4702 "\n -F Set the don't fragment bit" \
4703 "\n -I Use ICMP ECHO instead of UDP datagrams" \
4704 "\n -l Display the TTL value of the returned packet" \
4705 "\n -d Set SO_DEBUG options to socket" \
4706 "\n -n Print numeric addresses" \
4707 "\n -r Bypass routing tables, send directly to HOST" \
4709 "\n -m Max time-to-live (max number of hops)" \
4710 "\n -p Base UDP port number used in probes" \
4711 "\n (default 33434)" \
4712 "\n -q Number of probes per TTL (default 3)" \
4713 "\n -s IP address to use as the source address" \
4714 "\n -t Type-of-service in probe packets (default 0)" \
4715 "\n -w Time in seconds to wait for a response (default 3)" \
4716 "\n -g Loose source route gateway (8 max)" \
4718 #define traceroute6_trivial_usage \
4719 "[-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
4720 " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-i IFACE]\n" \
4722 #define traceroute6_full_usage "\n\n" \
4723 "Trace the route to HOST\n" \
4725 "\n -d Set SO_DEBUG options to socket" \
4726 "\n -n Print numeric addresses" \
4727 "\n -r Bypass routing tables, send directly to HOST" \
4729 "\n -m Max time-to-live (max number of hops)" \
4730 "\n -p Base UDP port number used in probes" \
4731 "\n (default is 33434)" \
4732 "\n -q Number of probes per TTL (default 3)" \
4733 "\n -s IP address to use as the source address" \
4734 "\n -t Type-of-service in probe packets (default 0)" \
4735 "\n -w Time in seconds to wait for a response (default 3)" \
4737 #define true_trivial_usage \
4739 #define true_full_usage "\n\n" \
4740 "Return an exit code of TRUE (0)"
4741 #define true_example_usage \
4746 #define tty_trivial_usage \
4748 #define tty_full_usage "\n\n" \
4749 "Print file name of stdin's terminal" \
4750 IF_INCLUDE_SUSv2( "\n" \
4752 "\n -s Print nothing, only return exit status" \
4754 #define tty_example_usage \
4758 #define ttysize_trivial_usage \
4760 #define ttysize_full_usage "\n\n" \
4761 "Print dimension(s) of stdin's terminal, on error return 80x25"
4763 #define tunctl_trivial_usage \
4764 "[-f device] ([-t name] | -d name)" IF_FEATURE_TUNCTL_UG(" [-u owner] [-g group] [-b]")
4765 #define tunctl_full_usage "\n\n" \
4766 "Create or delete tun interfaces\n" \
4768 "\n -f name tun device (/dev/net/tun)" \
4769 "\n -t name Create iface 'name'" \
4770 "\n -d name Delete iface 'name'" \
4771 IF_FEATURE_TUNCTL_UG( \
4772 "\n -u owner Set iface owner" \
4773 "\n -g group Set iface group" \
4774 "\n -b Brief output" \
4776 #define tunctl_example_usage \
4778 "# tunctl -d tun0\n"
4780 #define tune2fs_trivial_usage \
4781 /* "[-c max-mounts-count] [-e errors-behavior] [-g group] " */ \
4782 /* "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " */ \
4783 /* "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " */ \
4784 /* "[-r reserved-blocks-count] [-u user] [-C mount-count] " */ \
4786 /* "[-M last-mounted-dir] [-O [^]feature[,...]] " */ \
4787 /* "[-T last-check-time] [-U UUID] " */ \
4789 #define tune2fs_full_usage "\n\n" \
4790 "Adjust filesystem options on ext[23] filesystems"
4792 #define udhcpc_trivial_usage \
4793 "[-Cfbnqtvo] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n" \
4794 " [-p pidfile] [-r IP] [-s script] [-O dhcp-option]..." IF_FEATURE_UDHCP_PORT(" [-P N]")
4795 #define udhcpc_full_usage "\n\n" \
4797 " -V,--vendorclass=CLASSID Vendor class identifier" \
4798 "\n -i,--interface=INTERFACE Interface to use (default eth0)" \
4799 "\n -H,-h,--hostname=HOSTNAME Client hostname" \
4800 "\n -c,--clientid=CLIENTID Client identifier" \
4801 "\n -C,--clientid-none Suppress default client identifier" \
4802 "\n -p,--pidfile=FILE Create pidfile" \
4803 "\n -r,--request=IP IP address to request" \
4804 "\n -s,--script=FILE Run FILE at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
4805 "\n -t,--retries=N Send up to N discover packets" \
4806 "\n -T,--timeout=N Pause between packets (default 3 seconds)" \
4807 "\n -A,--tryagain=N Wait N seconds (default 20) after failure" \
4808 "\n -O,--request-option=OPT Request DHCP option OPT (cumulative)" \
4809 "\n -o,--no-default-options Don't request any options (unless -O is also given)" \
4810 "\n -f,--foreground Run in foreground" \
4812 "\n -b,--background Background if lease is not immediately obtained" \
4814 "\n -S,--syslog Log to syslog too" \
4815 "\n -n,--now Exit with failure if lease is not immediately obtained" \
4816 "\n -q,--quit Quit after obtaining lease" \
4817 "\n -R,--release Release IP on quit" \
4818 IF_FEATURE_UDHCP_PORT( \
4819 "\n -P,--client-port N Use port N instead of default 68" \
4821 IF_FEATURE_UDHCPC_ARPING( \
4822 "\n -a,--arping Use arping to validate offered address" \
4826 " -V CLASSID Vendor class identifier" \
4827 "\n -i INTERFACE Interface to use (default: eth0)" \
4828 "\n -H,-h HOSTNAME Client hostname" \
4829 "\n -c CLIENTID Client identifier" \
4830 "\n -C Suppress default client identifier" \
4831 "\n -p FILE Create pidfile" \
4832 "\n -r IP IP address to request" \
4833 "\n -s FILE Run FILE at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
4834 "\n -t N Send up to N request packets" \
4835 "\n -T N Try to get a lease for N seconds (default 3)" \
4836 "\n -A N Wait N seconds (default 20) after failure" \
4837 "\n -O OPT Request DHCP option OPT (cumulative)" \
4838 "\n -o Don't request any options (unless -O is also given)" \
4839 "\n -f Run in foreground" \
4841 "\n -b Background if lease is not immediately obtained" \
4843 "\n -S Log to syslog too" \
4844 "\n -n Exit with failure if lease is not immediately obtained" \
4845 "\n -q Quit after obtaining lease" \
4846 "\n -R Release IP on quit" \
4847 IF_FEATURE_UDHCP_PORT( \
4848 "\n -P N Use port N instead of default 68" \
4850 IF_FEATURE_UDHCPC_ARPING( \
4851 "\n -a Use arping to validate offered address" \
4855 #define udhcpd_trivial_usage \
4856 "[-fS]" IF_FEATURE_UDHCP_PORT(" [-P N]") " [configfile]" \
4858 #define udhcpd_full_usage "\n\n" \
4860 "\n -f Run in foreground" \
4861 "\n -S Log to syslog too" \
4862 IF_FEATURE_UDHCP_PORT( \
4863 "\n -P N Use port N instead of default 67" \
4866 #define umount_trivial_usage \
4867 "[OPTIONS] FILESYSTEM|DIRECTORY"
4868 #define umount_full_usage "\n\n" \
4869 "Unmount file systems\n" \
4871 IF_FEATURE_UMOUNT_ALL( \
4872 "\n -a Unmount all file systems" IF_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
4874 IF_FEATURE_MTAB_SUPPORT( \
4875 "\n -n Don't erase /etc/mtab entries" \
4877 "\n -r Try to remount devices as read-only if mount is busy" \
4878 "\n -l Lazy umount (detach filesystem)" \
4879 "\n -f Force umount (i.e., unreachable NFS server)" \
4880 IF_FEATURE_MOUNT_LOOP( \
4881 "\n -d Free loop device if it has been used" \
4884 #define umount_example_usage \
4885 "$ umount /dev/hdc1\n"
4887 #define uname_trivial_usage \
4889 #define uname_full_usage "\n\n" \
4890 "Print system information\n" \
4893 "\n -m The machine (hardware) type" \
4895 "\n -r OS release" \
4896 "\n -s OS name (default)" \
4897 "\n -p Processor type" \
4898 "\n -v OS version" \
4900 #define uname_example_usage \
4902 "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
4904 #define uncompress_trivial_usage \
4905 "[-c] [-f] [FILE]..."
4906 #define uncompress_full_usage "\n\n" \
4907 "Uncompress .Z file[s]\n" \
4909 "\n -c Extract to stdout" \
4910 "\n -f Overwrite an existing file" \
4912 #define unexpand_trivial_usage \
4913 "[-f][-a][-t N] [FILE|-]"
4914 #define unexpand_full_usage "\n\n" \
4915 "Convert spaces to tabs, writing to stdout\n" \
4917 IF_FEATURE_UNEXPAND_LONG_OPTIONS( \
4918 "\n -a,--all Convert all blanks" \
4919 "\n -f,--first-only Convert only leading blanks" \
4920 "\n -t,--tabs=N Tabstops every N chars" \
4922 IF_NOT_FEATURE_UNEXPAND_LONG_OPTIONS( \
4923 "\n -a Convert all blanks" \
4924 "\n -f Convert only leading blanks" \
4925 "\n -t N Tabstops every N chars" \
4928 #define uniq_trivial_usage \
4929 "[-fscduw]... [INPUT [OUTPUT]]"
4930 #define uniq_full_usage "\n\n" \
4931 "Discard duplicate lines\n" \
4933 "\n -c Prefix lines by the number of occurrences" \
4934 "\n -d Only print duplicate lines" \
4935 "\n -u Only print unique lines" \
4936 "\n -f N Skip first N fields" \
4937 "\n -s N Skip first N chars (after any skipped fields)" \
4938 "\n -w N Compare N characters in line" \
4940 #define uniq_example_usage \
4941 "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
4946 #define unzip_trivial_usage \
4947 "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
4948 #define unzip_full_usage "\n\n" \
4949 "Extract files from ZIP archives\n" \
4951 "\n -l List archive contents (with -q for short form)" \
4952 "\n -n Never overwrite existing files (default)" \
4953 "\n -o Overwrite files without prompting" \
4954 "\n -p Send output to stdout" \
4956 "\n -x Exclude these files" \
4957 "\n -d Extract files into this directory" \
4959 #define uptime_trivial_usage \
4961 #define uptime_full_usage "\n\n" \
4962 "Display the time since the last boot"
4964 #define uptime_example_usage \
4966 " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
4968 #define usleep_trivial_usage \
4970 #define usleep_full_usage "\n\n" \
4971 "Pause for N microseconds"
4973 #define usleep_example_usage \
4974 "$ usleep 1000000\n" \
4975 "[pauses for 1 second]\n"
4977 #define uudecode_trivial_usage \
4978 "[-o OUTFILE] [INFILE]"
4979 #define uudecode_full_usage "\n\n" \
4980 "Uudecode a file\n" \
4981 "Finds outfile name in uuencoded source unless -o is given"
4983 #define uudecode_example_usage \
4984 "$ uudecode -o busybox busybox.uu\n" \
4985 "$ ls -l busybox\n" \
4986 "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
4988 #define uuencode_trivial_usage \
4989 "[-m] [INFILE] STORED_FILENAME"
4990 #define uuencode_full_usage "\n\n" \
4991 "Uuencode a file to stdout\n" \
4993 "\n -m Use base64 encoding per RFC1521" \
4995 #define uuencode_example_usage \
4996 "$ uuencode busybox busybox\n" \
4997 "begin 755 busybox\n" \
4998 "<encoded file snipped>\n" \
4999 "$ uudecode busybox busybox > busybox.uu\n" \
5002 #define vconfig_trivial_usage \
5004 #define vconfig_full_usage "\n\n" \
5005 "Create and remove virtual ethernet devices\n" \
5007 "\n add [interface-name] [vlan_id]" \
5008 "\n rem [vlan-name]" \
5009 "\n set_flag [interface-name] [flag-num] [0 | 1]" \
5010 "\n set_egress_map [vlan-name] [skb_priority] [vlan_qos]" \
5011 "\n set_ingress_map [vlan-name] [skb_priority] [vlan_qos]" \
5012 "\n set_name_type [name-type]" \
5014 #define vi_trivial_usage \
5015 "[OPTIONS] [FILE]..."
5016 #define vi_full_usage "\n\n" \
5019 IF_FEATURE_VI_COLON( \
5020 "\n -c Initial command to run ($EXINIT also available)") \
5021 IF_FEATURE_VI_READONLY( \
5022 "\n -R Read-only") \
5023 "\n -H Short help regarding available features" \
5025 #define vlock_trivial_usage \
5027 #define vlock_full_usage "\n\n" \
5028 "Lock a virtual terminal. A password is required to unlock.\n" \
5030 "\n -a Lock all VTs" \
5032 #define volname_trivial_usage \
5034 #define volname_full_usage "\n\n" \
5035 "Show CD volume name of the DEVICE (default /dev/cdrom)"
5037 #define wall_trivial_usage \
5039 #define wall_full_usage "\n\n" \
5040 "Write content of FILE or stdin to all logged-in users"
5041 #define wall_sample_usage \
5042 "echo foo | wall\n" \
5045 #define watch_trivial_usage \
5046 "[-n SEC] [-t] PROG ARGS"
5047 #define watch_full_usage "\n\n" \
5048 "Run PROG periodically\n" \
5050 "\n -n Loop period in seconds (default 2)" \
5051 "\n -t Don't print header" \
5053 #define watch_example_usage \
5055 "Mon Dec 17 10:31:40 GMT 2000\n" \
5056 "Mon Dec 17 10:31:42 GMT 2000\n" \
5057 "Mon Dec 17 10:31:44 GMT 2000"
5059 #define watchdog_trivial_usage \
5060 "[-t N[ms]] [-T N[ms]] [-F] DEV"
5061 #define watchdog_full_usage "\n\n" \
5062 "Periodically write to watchdog device DEV\n" \
5064 "\n -T N Reboot after N seconds if not reset (default 60)" \
5065 "\n -t N Reset every N seconds (default 30)" \
5066 "\n -F Run in foreground" \
5068 "\nUse 500ms to specify period in milliseconds" \
5070 #define wc_trivial_usage \
5071 "[OPTIONS] [FILE]..."
5072 #define wc_full_usage "\n\n" \
5073 "Print line, word, and byte counts for each FILE (or stdin),\n" \
5074 "and a total line if more than one FILE is specified\n" \
5076 "\n -c Print the byte counts" \
5077 "\n -l Print the newline counts" \
5078 "\n -L Print the length of the longest line" \
5079 "\n -w Print the word counts" \
5081 #define wc_example_usage \
5082 "$ wc /etc/passwd\n" \
5083 " 31 46 1365 /etc/passwd\n"
5085 #define wget_trivial_usage \
5086 IF_FEATURE_WGET_LONG_OPTIONS( \
5087 "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document file]\n" \
5088 " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
5089 " [--no-check-certificate] [-U|--user-agent agent] url" \
5091 IF_NOT_FEATURE_WGET_LONG_OPTIONS( \
5092 "[-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url" \
5094 #define wget_full_usage "\n\n" \
5095 "Retrieve files via HTTP or FTP\n" \
5097 "\n -s Spider mode - only check file existence" \
5098 "\n -c Continue retrieval of aborted transfer" \
5100 "\n -P Set directory prefix to DIR" \
5101 "\n -O Save to filename ('-' for stdout)" \
5102 "\n -U Adjust 'User-Agent' field" \
5103 "\n -Y Use proxy ('on' or 'off')" \
5105 #define which_trivial_usage \
5107 #define which_full_usage "\n\n" \
5109 #define which_example_usage \
5113 #define who_trivial_usage \
5115 #define who_full_usage "\n\n" \
5116 "Show who is logged on\n" \
5120 #define whoami_trivial_usage \
5122 #define whoami_full_usage "\n\n" \
5123 "Print the user name associated with the current effective user id"
5125 #define xargs_trivial_usage \
5126 "[OPTIONS] [PROG ARGS]"
5127 #define xargs_full_usage "\n\n" \
5128 "Run PROG on every item given by stdin\n" \
5130 IF_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
5131 "\n -p Ask user whether to run each command") \
5132 "\n -r Don't run command if input is empty" \
5133 IF_FEATURE_XARGS_SUPPORT_ZERO_TERM( \
5134 "\n -0 Input is separated by NUL characters") \
5135 "\n -t Print the command on stderr before execution" \
5136 "\n -e[STR] STR stops input processing" \
5137 "\n -n N Pass no more than N args to PROG" \
5138 "\n -s N Pass command line of no more than N bytes" \
5139 IF_FEATURE_XARGS_SUPPORT_TERMOPT( \
5140 "\n -x Exit if size is exceeded") \
5142 #define xargs_example_usage \
5143 "$ ls | xargs gzip\n" \
5144 "$ find . -name '*.c' -print | xargs rm\n"
5146 #define yes_trivial_usage \
5147 "[OPTIONS] [STRING]"
5148 #define yes_full_usage "\n\n" \
5149 "Repeatedly output a line with STRING, or 'y'"
5151 #define zcat_trivial_usage \
5153 #define zcat_full_usage "\n\n" \
5154 "Uncompress to stdout"
5156 #define zcip_trivial_usage \
5157 "[OPTIONS] IFACE SCRIPT"
5158 #define zcip_full_usage "\n\n" \
5159 "Manage a ZeroConf IPv4 link-local address\n" \
5161 "\n -f Run in foreground" \
5162 "\n -q Quit after obtaining address" \
5163 "\n -r 169.254.x.x Request this address first" \
5166 "\nWith no -q, runs continuously monitoring for ARP conflicts," \
5167 "\nexits only on I/O errors (link down etc)" \
projects / oweals / busybox.git / blob