1 #define addgroup_trivial_usage \
2 "[OPTIONS] group_name [user_name]"
3 #define addgroup_full_usage \
4 "Adds a group to the system" \
6 "\t-g\t\tspecify gid\n"
8 #define adduser_trivial_usage \
10 #define adduser_full_usage \
11 "Adds a user to the system" \
13 "\t-h DIR\t\tAssign home directory DIR\n" \
14 "\t-g GECOS\t\tAssign gecos field GECOS\n" \
15 "\t-s SHELL\t\tAssign login shell SHELL\n" \
16 "\t-G\t\tAdd the user to existing group GROUP\n" \
17 "\t-S\t\tcreate a system user (ignored)\n" \
18 "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \
19 "\t-H\t\tDo not create the home directory\n"
21 #define adjtimex_trivial_usage \
22 "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
23 #define adjtimex_full_usage \
24 "Reads and optionally sets system timebase parameters.\n" \
25 "See adjtimex(2).\n\n" \
27 "\t-q\t\tquiet mode - do not print\n" \
28 "\t-o offset\ttime offset, microseconds\n" \
29 "\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \
30 "\t\t\t(positive values make the system clock run fast)\n" \
31 "\t-t tick\t\tmicroseconds per tick, usually 10000\n" \
34 #define ar_trivial_usage \
35 "-[ov][ptx] ARCHIVE FILES"
36 #define ar_full_usage \
37 "Extract or list FILES from an ar archive.\n\n" \
39 "\t-o\t\tpreserve original dates\n" \
40 "\t-p\t\textract to stdout\n" \
43 "\t-v\t\tverbosely list files processed\n"
45 #define arping_trivial_usage \
46 "[-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target\n"
47 #define arping_full_usage \
48 "Ping hosts by ARP requests/replies.\n\n" \
50 "\t-f\t\tQuit on first ARP reply\n" \
51 "\t-q\t\tBe quiet\n" \
52 "\t-b\t\tKeep broadcasting, don't go unicast\n" \
53 "\t-D\t\tDuplicated address detection mode\n" \
54 "\t-U\t\tUnsolicited ARP mode, update your neighbours\n" \
55 "\t-A\t\tARP answer mode, update your neighbours\n" \
56 "\t-c count\tStop after sending count ARP request packets\n" \
57 "\t-w timeout\tTime to wait for ARP reply, in seconds\n" \
58 "\t-I device\tOutgoing interface name, default is eth0\n" \
59 "\t-s sender\tSet specific sender IP address\n" \
60 "\ttarget\t\tTarget IP address of ARP request\n"
62 #define awk_trivial_usage \
63 "[-v var=val][-F sep] { -f progname | 'programtext' } [FILE ...]"
64 #define awk_full_usage \
66 "\t-v var=val\tassign value 'val' to variable 'var'\n" \
67 "\t-F sep\t\tuse 'sep' as field separator\n" \
68 "\t-f progname\tread program source from file 'progname'\n"
70 #define basename_trivial_usage \
72 #define basename_full_usage \
73 "Strips directory path and suffixes from FILE.\n" \
74 "If specified, also removes any trailing SUFFIX."
75 #define basename_example_usage \
76 "$ basename /usr/local/bin/foo\n" \
78 "$ basename /usr/local/bin/\n" \
80 "$ basename /foo/bar.txt .txt\n" \
83 #define bunzip2_trivial_usage \
85 #define bunzip2_full_usage \
86 "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \
88 "\t-c\tWrite output to standard output\n" \
91 #define bzcat_trivial_usage \
93 #define bzcat_full_usage \
94 "Uncompress to stdout."
96 #define cal_trivial_usage \
97 "[-jy] [[month] year]"
98 #define cal_full_usage \
99 "Display a calendar.\n" \
101 "\t-j\tUse julian dates.\n" \
102 "\t-y\tDisplay the entire year."
104 #define cat_trivial_usage \
106 #define cat_full_usage \
107 "Concatenates FILE(s) and prints them to stdout.\n\n" \
109 "\t-u\tignored since unbuffered i/o is always used"
110 #define cat_example_usage \
111 "$ cat /proc/uptime\n" \
114 #define chgrp_trivial_usage \
115 "[OPTION]... GROUP FILE..."
116 #define chgrp_full_usage \
117 "Change the group membership of each FILE to GROUP.\n" \
119 "\t-R\tChanges files and directories recursively."
120 #define chgrp_example_usage \
121 "$ ls -l /tmp/foo\n" \
122 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
123 "$ chgrp root /tmp/foo\n" \
124 "$ ls -l /tmp/foo\n" \
125 "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
127 #define chmod_trivial_usage \
128 "[-R] MODE[,MODE]... FILE..."
129 #define chmod_full_usage \
130 "Each MODE is one or more of the letters ugoa, one of the\n" \
131 "symbols +-= and one or more of the letters rwxst.\n\n" \
133 "\t-R\tChanges files and directories recursively."
134 #define chmod_example_usage \
135 "$ ls -l /tmp/foo\n" \
136 "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
137 "$ chmod u+x /tmp/foo\n" \
138 "$ ls -l /tmp/foo\n" \
139 "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
140 "$ chmod 444 /tmp/foo\n" \
141 "$ ls -l /tmp/foo\n" \
142 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
144 #define chown_trivial_usage \
145 "[ -Rh ]... OWNER[<.|:>[GROUP]] FILE..."
146 #define chown_full_usage \
147 "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \
149 "\t-R\tChanges files and directories recursively.\n" \
150 "\t-h\tDo not dereference symbolic links."
151 #define chown_example_usage \
152 "$ ls -l /tmp/foo\n" \
153 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
154 "$ chown root /tmp/foo\n" \
155 "$ ls -l /tmp/foo\n" \
156 "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
157 "$ chown root.root /tmp/foo\n" \
159 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
161 #define chroot_trivial_usage \
162 "NEWROOT [COMMAND...]"
163 #define chroot_full_usage \
164 "Run COMMAND with root directory set to NEWROOT."
165 #define chroot_example_usage \
166 "$ ls -l /bin/ls\n" \
167 "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
168 "$ mount /dev/hdc1 /mnt -t minix\n" \
170 "$ ls -l /bin/ls\n" \
171 "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
173 #define chvt_trivial_usage \
175 #define chvt_full_usage \
176 "Changes the foreground virtual terminal to /dev/ttyN"
178 #define clear_trivial_usage \
180 #define clear_full_usage \
183 #define cmp_trivial_usage \
184 "[OPTION]... FILE1 [FILE2]"
185 #define cmp_full_usage \
186 "Compare files.\n\n" \
188 "\t-l\tWrite the byte numbers (decimal) and values (octal)\n" \
189 "\t\t for all differing bytes.\n" \
190 "\t-s\tquiet mode - do not print"
192 #define cp_trivial_usage \
193 "[OPTION]... SOURCE DEST"
194 #define cp_full_usage \
195 "Copies SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" \
197 "\t-a\tSame as -dpR\n" \
198 "\t-d\tPreserves links\n" \
199 "\t-p\tPreserves file attributes if possible\n" \
200 "\t-f\tforce (implied; ignored) - always set\n" \
201 "\t-i\tinteractive, prompt before overwrite\n" \
202 "\t-R,-r\tCopies directories recursively"
204 #define cpio_trivial_usage \
205 "-[dimtuv][F cpiofile]"
206 #define cpio_full_usage \
207 "Extract or list files from a cpio archive\n" \
208 "Main operation mode:\n" \
209 "\td\t\tmake leading directories\n" \
211 "\tm\t\tpreserve mtime\n" \
213 "\tu\t\tunconditional overwrite\n" \
214 "\tF\t\tinput from file"
216 #define crond_trivial_usage \
217 "-d[#] -c <crondir> -f -b"
218 #define crond_full_usage \
219 "\t-d [#] -l [#] -S -L logfile -f -b -c dir\n" \
220 "\t-d num\tdebug level\n" \
221 "\t-l num\tlog level (8 - default)\n" \
222 "\t-S\tlog to syslod (default)\n" \
223 "\t-L file\tlog to file\n" \
224 "\t-f\trun in fordeground\n" \
225 "\t-b\trun in background (default)\n" \
226 "\t-c dir\tworking dir"
228 #define crontab_trivial_usage \
229 "crontab [-c dir] {file|-}|[-u|-l|-e|-d user]"
230 #define crontab_full_usage \
231 "\tfile <opts> replace crontab from file\n" \
232 "\t- <opts> replace crontab from stdin\n" \
233 "\t-u user specify user\n" \
234 "\t-l [user] list crontab for user\n" \
235 "\t-e [user] edit crontab for user\n" \
236 "\t-d [user] delete crontab for user\n" \
237 "\t-c dir specify crontab directory"
240 #define cut_trivial_usage \
241 "[OPTION]... [FILE]..."
242 #define cut_full_usage \
243 "Prints selected fields from each input FILE to standard output.\n\n" \
245 "\t-b LIST\t\tOutput only bytes from LIST\n" \
246 "\t-c LIST\t\tOutput only characters from LIST\n" \
247 "\t-d CHAR\t\tUse CHAR instead of tab as the field delimiter\n" \
248 "\t-s\t\tOutput only the lines containing delimiter\n" \
249 "\t-f N\t\tPrint only these fields\n" \
251 #define cut_example_usage \
252 "$ echo "Hello world" | cut -f 1 -d ' '\n" \
254 "$ echo "Hello world" | cut -f 2 -d ' '\n" \
257 #ifdef CONFIG_FEATURE_DATE_ISOFMT
258 #define USAGE_DATE_ISOFMT(a) a
260 #define USAGE_DATE_ISOFMT(a)
263 #define date_trivial_usage \
264 "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
265 #define date_full_usage \
266 "Displays the current time in the given FORMAT, or sets the system date.\n" \
268 "\t-R\t\tOutputs RFC-822 compliant date string\n" \
269 "\t-d STRING\tDisplays time described by STRING, not `now'\n" \
270 USAGE_DATE_ISOFMT("\t-I[TIMESPEC]\tOutputs an ISO-8601 compliant date/time string.\n" \
271 "\t\t\tTIMESPEC=`date' (or missing) for date only,\n" \
272 "\t\t\t`hours', `minutes', or `seconds' for date and,\n" \
273 "\t\t\ttime to the indicated precision.\n") \
274 "\t-s\t\tSets time described by STRING\n" \
275 "\t-u\t\tPrints or sets Coordinated Universal Time"
276 #define date_example_usage \
278 "Wed Apr 12 18:52:41 MDT 2000\n"
280 #define dc_trivial_usage \
282 #define dc_full_usage \
283 "This is a Tiny RPN calculator that understands the\n" \
284 "following operations: +, add, -, sub, *, mul, /, div, %, mod, "\
285 "**, exp, and, or, not, eor.\n" \
286 "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \
288 "p - Prints the value on the top of the stack, without altering the stack.\n" \
289 "f - Prints the entire contents of the stack without altering anything.\n" \
290 "o - Pops the value off the top of the stack and uses it to set the output radix.\n" \
291 " Only 10 and 16 are supported.\n"
293 #define dc_example_usage \
296 "$ dc 8 8 * 2 2 + /\n" \
302 "$ echo 72 9 div 8 mul | dc\n" \
305 #define dd_trivial_usage \
306 "[if=FILE] [of=FILE] [bs=N] [count=N] [skip=N]\n" \
307 "\t [seek=N] [conv=notrunc|noerror|sync]"
308 #define dd_full_usage \
309 "Copy a file, converting and formatting according to options\n\n" \
310 "\tif=FILE\t\tread from FILE instead of stdin\n" \
311 "\tof=FILE\t\twrite to FILE instead of stdout\n" \
312 "\tbs=N\t\tread and write N bytes at a time\n" \
313 "\tcount=N\t\tcopy only N input blocks\n" \
314 "\tskip=N\t\tskip N input blocks\n" \
315 "\tseek=N\t\tskip N output blocks\n" \
316 "\tconv=notrunc\tdon't truncate output file\n" \
317 "\tconv=noerror\tcontinue after read errors\n" \
318 "\tconv=sync\tpad blocks with zeros\n" \
320 "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
321 "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)."
322 #define dd_example_usage \
323 "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
327 #define deallocvt_trivial_usage \
329 #define deallocvt_full_usage \
330 "Deallocate unused virtual terminal /dev/ttyN"
332 #define delgroup_trivial_usage \
334 #define delgroup_full_usage \
335 "Deletes group GROUP from the system"
337 #define deluser_trivial_usage \
339 #define deluser_full_usage \
340 "Deletes user USER from the system"
342 #ifdef CONFIG_DEVFSD_FG_NP
343 #define USAGE_DEVFSD_FG_NP(a) a
345 #define USAGE_DEVFSD_FG_NP(a)
348 #define devfsd_trivial_usage \
350 USAGE_DEVFSD_FG_NP("[-fg][-np]" )
351 #define devfsd_full_usage \
352 "Optional daemon for managing devfs (the Linux Device Filesystem).\n" \
354 "\tmntpnt\tThe mount point where devfs is mounted.\n\n" \
355 "\t-v\tPrint the protocol version numbers for devfsd\n" \
356 "\t\tand the kernel-side protocol version and exits." \
357 USAGE_DEVFSD_FG_NP( "\n\n\t-fg\tRun the daemon in the foreground.\n\n" \
358 "\t-np\tExit after parsing the configuration file\n" \
359 "\t\tand processing synthetic REGISTER events.\n" \
360 "\t\tDo not poll for events.")
362 #ifdef CONFIG_FEATURE_HUMAN_READABLE
363 #define USAGE_HUMAN_READABLE(a) a
364 #define USAGE_NOT_HUMAN_READABLE(a)
366 #define USAGE_HUMAN_READABLE(a)
367 #define USAGE_NOT_HUMAN_READABLE(a) a
369 #define df_trivial_usage \
370 "[-" USAGE_HUMAN_READABLE("hm") USAGE_NOT_HUMAN_READABLE("") "k] [FILESYSTEM ...]"
371 #define df_full_usage \
372 "Print the filesystem space used and space available.\n\n" \
374 USAGE_HUMAN_READABLE( \
375 "\n\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
376 "\t-m\tprint sizes in megabytes\n" \
377 "\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \
378 "\n\t-k\tprint sizes in kilobytes(compatibility)")
379 #define df_example_usage \
381 "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
382 "/dev/sda3 8690864 8553540 137324 98% /\n" \
383 "/dev/sda1 64216 36364 27852 57% /boot\n" \
385 "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
386 "/dev/sda3 8690864 8553540 137324 98% /\n"
388 #define dirname_trivial_usage \
390 #define dirname_full_usage \
391 "Strips non-directory suffix from FILENAME"
392 #define dirname_example_usage \
393 "$ dirname /tmp/foo\n" \
395 "$ dirname /tmp/foo/\n" \
398 #define dmesg_trivial_usage \
399 "[-c] [-n LEVEL] [-s SIZE]"
400 #define dmesg_full_usage \
401 "Prints or controls the kernel ring buffer\n\n" \
403 "\t-c\t\tClears the ring buffer's contents after printing\n" \
404 "\t-n LEVEL\tSets console logging level\n" \
405 "\t-s SIZE\t\tUse a buffer of size SIZE"
407 #define dos2unix_trivial_usage \
409 #define dos2unix_full_usage \
410 "Converts FILE from dos format to unix format. When no option\n" \
411 "is given, the input is converted to the opposite output format.\n" \
412 "When no file is given, uses stdin for input and stdout for output.\n\n" \
414 "\t-u\toutput will be in UNIX format\n" \
415 "\t-d\toutput will be in DOS format"
417 #define dpkg_trivial_usage \
418 "-i package_file\n" \
419 "[-CPru] package_name"
420 #define dpkg_full_usage \
421 "\t-i\tInstall the package\n" \
422 "\t-C\tConfigure an unpackaged package\n" \
423 "\t-P\tPurge all files of a package\n" \
424 "\t-r\tRemove all but the configuration files for a package\n" \
425 "\t-u\tUnpack a package, but dont configure it\n"
427 #define dpkg_deb_trivial_usage \
428 "[-cefItxX] FILE [argument]"
429 #define dpkg_deb_full_usage \
430 "Perform actions on debian packages (.debs)\n\n" \
432 "\t-c\tList contents of filesystem tree\n" \
433 "\t-e\tExtract control files to [argument] directory\n" \
434 "\t-f\tDisplay control field name starting with [argument]\n" \
435 "\t-I\tDisplay the control filenamed [argument]\n" \
436 "\t-t\tExtract filesystem tree to stdout in tar format\n" \
437 "\t-x\tExtract packages filesystem tree to directory\n" \
438 "\t-X\tVerbose extract"
439 #define dpkg_deb_example_usage \
440 "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
442 #define dpkg_divert_trivial_usage \
444 #define dpkg_divert_full_usage \
447 #ifdef CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K
448 #define USAGE_DU_DEFALT_BLOCKSIZE_1k(a) a
449 #define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a)
451 #define USAGE_DU_DEFALT_BLOCKSIZE_1k(a)
452 #define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a) a
455 #define du_trivial_usage \
456 "[-aHLdclsx" USAGE_HUMAN_READABLE("hm") "k] [FILE]..."
457 #define du_full_usage \
458 "Summarizes disk space used for each FILE and/or directory.\n" \
459 "Disk space is printed in units of " \
460 USAGE_DU_DEFALT_BLOCKSIZE_1k("1024") USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k("512") \
463 "\t-a\tshow sizes of files in addition to directories\n" \
464 "\t-H\tfollow symbolic links that are FILE command line args\n" \
465 "\t-L\tfollow all symbolic links encountered\n" \
466 "\t-d N\tlimit output to directories (and files with -a) of depth < N\n" \
467 "\t-c\toutput a grand total\n" \
468 "\t-l\tcount sizes many times if hard linked\n" \
469 "\t-s\tdisplay only a total for each argument\n" \
470 "\t-x\tskip directories on different filesystems\n" \
471 USAGE_HUMAN_READABLE( \
472 "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
473 "\t-m\tprint sizes in megabytes\n" ) \
474 "\t-k\tprint sizes in kilobytes" USAGE_DU_DEFALT_BLOCKSIZE_1k("(default)")
475 #define du_example_usage \
478 "12 ./kernel-patches/CVS\n" \
479 "80 ./kernel-patches\n" \
482 "12 ./scripts/CVS\n" \
488 #define dumpkmap_trivial_usage \
490 #define dumpkmap_full_usage \
491 "Prints out a binary keyboard translation table to standard output."
492 #define dumpkmap_example_usage \
493 "$ dumpkmap > keymap\n"
495 #define dumpleases_trivial_usage \
496 "[-r|-a] [-f LEASEFILE]"
497 #define dumpleases_full_usage \
498 "\t-f,\t--file=FILENAME\tLeases file to load\n" \
499 "\t-r,\t--remaining\tInterepret lease times as time remaing\n" \
500 "\t-a,\t--absolute\tInterepret lease times as expire time\n"
502 #ifdef CONFIG_FEATURE_FANCY_ECHO
503 #define USAGE_FANCY_ECHO(a) a
505 #define USAGE_FANCY_ECHO(a)
508 #define echo_trivial_usage \
509 USAGE_FANCY_ECHO("[-neE] ") "[ARG ...]"
510 #define echo_full_usage \
511 "Prints the specified ARGs to stdout\n\n" \
512 USAGE_FANCY_ECHO("Options:\n" \
513 "\t-n\tsuppress trailing newline\n" \
514 "\t-e\tinterpret backslash-escaped characters (i.e., \\t=tab)\n" \
515 "\t-E\tdisable interpretation of backslash-escaped characters")
516 #define echo_example_usage \
517 "$ echo "Erik is cool"\n" \
519 USAGE_FANCY_ECHO("$ echo -e "Erik\\nis\\ncool"\n" \
523 "$ echo "Erik\\nis\\ncool"\n" \
524 "Erik\\nis\\ncool\n")
526 #define env_trivial_usage \
527 "[-iu] [-] [name=value]... [command]"
528 #define env_full_usage \
529 "Prints the current environment or runs a program after setting\n" \
530 "up the specified environment.\n\n" \
532 "\t-, -i\tstart with an empty environment\n" \
533 "\t-u\tremove variable from the environment\n"
535 #define expr_trivial_usage \
537 #define expr_full_usage \
538 "Prints the value of EXPRESSION to standard output.\n\n" \
539 "EXPRESSION may be:\n" \
540 "\tARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
541 "\tARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
542 "\tARG1 < ARG2 ARG1 is less than ARG2\n" \
543 "\tARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \
544 "\tARG1 = ARG2 ARG1 is equal to ARG2\n" \
545 "\tARG1 != ARG2 ARG1 is unequal to ARG2\n" \
546 "\tARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \
547 "\tARG1 > ARG2 ARG1 is greater than ARG2\n" \
548 "\tARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" \
549 "\tARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" \
550 "\tARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" \
551 "\tARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" \
552 "\tARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" \
553 "\tSTRING : REGEXP anchored pattern match of REGEXP in STRING\n" \
554 "\tmatch STRING REGEXP same as STRING : REGEXP\n" \
555 "\tsubstr STRING POS LENGTH substring of STRING, POS counted from 1\n" \
556 "\tindex STRING CHARS index in STRING where any CHARS is found,\n" \
558 "\tlength STRING length of STRING\n" \
559 "\tquote TOKEN interpret TOKEN as a string, even if\n" \
560 "\t it is a keyword like `match' or an\n" \
561 "\t operator like `/'\n" \
562 "\t( EXPRESSION ) value of EXPRESSION\n\n" \
563 "Beware that many operators need to be escaped or quoted for shells.\n" \
564 "Comparisons are arithmetic if both ARGs are numbers, else\n" \
565 "lexicographical. Pattern matches return the string matched between \n" \
566 "\\( and \\) or null; if \\( and \\) are not used, they return the number \n" \
567 "of characters matched or 0."
569 #define false_trivial_usage \
571 #define false_full_usage \
572 "Return an exit code of FALSE (1)."
573 #define false_example_usage \
578 #define fbset_trivial_usage \
580 #define fbset_full_usage \
581 "Show and modify frame buffer settings"
582 #define fbset_example_usage \
584 "mode "1024x768-76"\n" \
585 "\t# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
586 "\tgeometry 1024 768 1024 768 16\n" \
587 "\ttimings 12714 128 32 16 4 128 4\n" \
589 "\trgba 5/11,6/5,5/0,0/0\n" \
592 #define fdflush_trivial_usage \
594 #define fdflush_full_usage \
595 "Forces floppy disk drive to detect disk change"
597 #define fdformat_trivial_usage \
599 #define fdformat_full_usage \
600 "Low-level formats a floppy disk\n\n" \
602 "\t-n\tDon't verify after format"
604 #define fdisk_trivial_usage \
605 "[-l] [-v] [-b SSZ] [-u] DISK"
606 #define fdisk_full_usage \
607 "Change partition table\n" \
609 "-l List partition table(s)\n" \
610 "-u Give Start and End in sector (instead of cylinder) units\n" \
611 "-s PARTITION Give partition size(s) in blocks\n" \
612 "-b 2048: (for certain MO disks) use 2048-byte sectors\n" \
613 "-v Give fdisk version"
615 #ifdef CONFIG_FEATURE_FIND_TYPE
616 #define USAGE_FIND_TYPE(a) a
618 #define USAGE_FIND_TYPE(a)
620 #ifdef CONFIG_FEATURE_FIND_PERM
621 #define USAGE_FIND_PERM(a) a
623 #define USAGE_FIND_PERM(a)
625 #ifdef CONFIG_FEATURE_FIND_MTIME
626 #define USAGE_FIND_MTIME(a) a
628 #define USAGE_FIND_MTIME(a)
630 #ifdef CONFIG_FEATURE_FIND_NEWER
631 #define USAGE_FIND_NEWER(a) a
633 #define USAGE_FIND_NEWER(a)
635 #ifdef CONFIG_FEATURE_FIND_INUM
636 #define USAGE_FIND_INUM(a) a
638 #define USAGE_FIND_INUM(a)
641 #define find_trivial_usage \
642 "[PATH...] [EXPRESSION]"
643 #define find_full_usage \
644 "Search for files in a directory hierarchy. The default PATH is\n" \
645 "the current directory; default EXPRESSION is '-print'\n" \
646 "\nEXPRESSION may consist of:\n" \
647 "\t-follow\t\tDereference symbolic links.\n" \
648 "\t-name PATTERN\tFile name (leading directories removed) matches PATTERN.\n" \
649 "\t-print\t\tPrint (default and assumed).\n" \
651 "\n\t-type X\t\tFiletype matches X (where X is one of: f,d,l,b,c,...)" \
653 "\n\t-perm PERMS\tPermissions match any of (+NNN); all of (-NNN);\n\t\t\tor exactly (NNN)" \
654 ) USAGE_FIND_MTIME( \
655 "\n\t-mtime TIME\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) days" \
656 ) USAGE_FIND_NEWER( \
657 "\n\t-newer FILE\tModified time is more recent than FILE's" \
659 "\n\t-inum N\t\tFile has inode number N")
660 #define find_example_usage \
661 "$ find / -name /etc/passwd\n" \
664 #define fold_trivial_usage \
666 #define fold_full_usage \
667 "Wrap input lines in each FILE (standard input by default), writing to\n" \
668 "standard output.\n\n" \
670 "\t-b\tcount bytes rather than columns\n" \
671 "\t-s\tbreak at spaces\n" \
672 "\t-w\tuse WIDTH columns instead of 80\n"
674 #define free_trivial_usage \
676 #define free_full_usage \
677 "Displays the amount of free and used system memory"
678 #define free_example_usage \
680 " total used free shared buffers\n" \
681 " Mem: 257628 248724 8904 59644 93124\n" \
682 " Swap: 128516 8404 120112\n" \
683 "Total: 386144 257128 129016\n" \
685 #define freeramdisk_trivial_usage \
687 #define freeramdisk_full_usage \
688 "Frees all memory used by the specified ramdisk."
689 #define freeramdisk_example_usage \
690 "$ freeramdisk /dev/ram2\n"
692 #define fsck_minix_trivial_usage \
693 "[-larvsmf] /dev/name"
694 #define fsck_minix_full_usage \
695 "Performs a consistency check for MINIX filesystems.\n\n" \
697 "\t-l\tLists all filenames\n" \
698 "\t-r\tPerform interactive repairs\n" \
699 "\t-a\tPerform automatic repairs\n" \
701 "\t-s\tOutputs super-block information\n" \
702 "\t-m\tActivates MINIX-like \"mode not cleared\" warnings\n" \
703 "\t-f\tForce file system check."
705 #define ftpget_trivial_usage \
706 "[options] remote-host local-file remote-file"
707 #define ftpget_full_usage \
708 "Retrieve a remote file via FTP.\n\n" \
710 "\t-c, --continue Continue a previous transfer\n" \
711 "\t-v, --verbose Verbose\n" \
712 "\t-u, --username Username to be used\n" \
713 "\t-p, --password Password to be used\n" \
714 "\t-P, --port Port number to be used\n"
716 #define ftpput_trivial_usage \
717 "[options] remote-host remote-file local-file"
718 #define ftpput_full_usage \
719 "Store a local file on a remote machine via FTP.\n\n" \
721 "\t-v, --verbose Verbose\n" \
722 "\t-u, --username Username to be used\n" \
723 "\t-p, --password Password to be used\n" \
724 "\t-P, --port Port number to be used\n"
726 #define getopt_trivial_usage \
728 #define getopt_full_usage \
729 "Parse command options\n" \
730 "\t-a, --alternative Allow long options starting with single -\n" \
731 "\t-l, --longoptions=longopts Long options to be recognized\n" \
732 "\t-n, --name=progname The name under which errors are reported\n" \
733 "\t-o, --options=optstring Short options to be recognized\n" \
734 "\t-q, --quiet Disable error reporting by getopt(3)\n" \
735 "\t-Q, --quiet-output No normal output\n" \
736 "\t-s, --shell=shell Set shell quoting conventions\n" \
737 "\t-T, --test Test for getopt(1) version\n" \
738 "\t-u, --unqote Do not quote the output"
739 #define getopt_example_usage \
740 "$ cat getopt.test\n" \
742 "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
743 " -n 'example.busybox' -- "$@"`\n" \
744 "if [ $? != 0 ] ; then exit 1 ; fi\n" \
745 "eval set -- "$GETOPT"\n" \
746 "while true ; do\n" \
748 " -a|--a-long) echo \"Option a\" ; shift ;;\n" \
749 " -b|--b-long) echo \"Option b, argument `$2'\" ; shift 2 ;;\n" \
752 " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \
753 " *) echo \"Option c, argument `$2'\" ; shift 2 ;;\n" \
755 " --) shift ; break ;;\n" \
756 " *) echo \"Internal error!\" ; exit 1 ;;\n" \
760 #define getty_trivial_usage \
761 "getty [OPTIONS]... baud_rate,... line [termtype]"
762 #define getty_full_usage \
763 "\nOpens a tty, prompts for a login name, then invokes /bin/login\n\n" \
765 "\t-h\t\tEnable hardware (RTS/CTS) flow control.\n" \
766 "\t-i\t\tDo not display /etc/issue before running login.\n" \
767 "\t-L\t\tLocal line, so do not do carrier detect.\n" \
768 "\t-m\t\tGet baud rate from modem's CONNECT status message.\n" \
769 "\t-w\t\tWait for a CR or LF before sending /etc/issue.\n" \
770 "\t-n\t\tDo not prompt the user for a login name.\n" \
771 "\t-f issue_file\tDisplay issue_file instead of /etc/issue.\n" \
772 "\t-l login_app\tInvoke login_app instead of /bin/login.\n" \
773 "\t-t timeout\tTerminate after timeout if no username is read.\n" \
774 "\t-I initstring\tSets the init string to send before anything else.\n" \
775 "\t-H login_host\tLog login_host into the utmp file as the hostname."
778 #define grep_trivial_usage \
779 "[-ihHnqvs] PATTERN [FILEs...]"
780 #define grep_full_usage \
781 "Search for PATTERN in each FILE or standard input.\n\n" \
783 "\t-H\tprefix output lines with filename where match was found\n" \
784 "\t-h\tsuppress the prefixing filename on output\n" \
785 "\t-i\tignore case distinctions\n" \
786 "\t-l\tlist names of files that match\n" \
787 "\t-n\tprint line number with output lines\n" \
788 "\t-q\tbe quiet. Returns 0 if result was found, 1 otherwise\n" \
789 "\t-v\tselect non-matching lines\n" \
790 "\t-s\tsuppress file open/read error messages"
791 #define grep_example_usage \
792 "$ grep root /etc/passwd\n" \
793 "root:x:0:0:root:/root:/bin/bash\n" \
794 "$ grep ^[rR]oo. /etc/passwd\n" \
795 "root:x:0:0:root:/root:/bin/bash\n"
797 #define gunzip_trivial_usage \
799 #define gunzip_full_usage \
800 "Uncompress FILE (or standard input if FILE is '-').\n\n" \
802 "\t-c\tWrite output to standard output\n" \
803 "\t-t\tTest compressed file integrity"
804 #define gunzip_example_usage \
805 "$ ls -la /tmp/BusyBox*\n" \
806 "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
807 "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
808 "$ ls -la /tmp/BusyBox*\n" \
809 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
811 #define gzip_trivial_usage \
812 "[OPTION]... [FILE]..."
813 #define gzip_full_usage \
814 "Compress FILE(s) with maximum compression.\n" \
815 "When FILE is '-' or unspecified, reads standard input. Implies -c.\n\n" \
817 "\t-c\tWrite output to standard output instead of FILE.gz\n" \
819 #define gzip_example_usage \
820 "$ ls -la /tmp/busybox*\n" \
821 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
822 "$ gzip /tmp/busybox.tar\n" \
823 "$ ls -la /tmp/busybox*\n" \
824 "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
826 #define halt_trivial_usage \
828 #define halt_full_usage \
831 #ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY
832 #define USAGE_HDPARM_IDENT(a) a
834 #define USAGE_HDPARM_IDENT(a)
837 #ifdef CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
838 #define USAGE_SCAN_HWIF(a) a
840 #define USAGE_SCAN_HWIF(a)
843 #ifdef CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
844 #define USAGE_UNREGISTER_HWIF(a) a
846 #define USAGE_UNREGISTER_HWIF(a)
849 #ifdef CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
850 #define USAGE_DRIVE_RESET(a) a
852 #define USAGE_DRIVE_RESET(a)
855 #ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
856 #define USAGE_TRISTATE_HWIF(a) a
858 #define USAGE_TRISTATE_HWIF(a)
861 #ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
862 #define USAGE_GETSET_DMA(a) a
864 #define USAGE_GETSET_DMA(a)
867 #define hdparm_trivial_usage \
868 "[options] [device] .."
869 #define hdparm_full_usage \
871 " -a get/set fs readahead\n" \
872 " -A set drive read-lookahead flag (0/1)\n" \
873 " -b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
874 " -B set Advanced Power Management setting (1-255)\n" \
875 " -c get/set IDE 32-bit IO setting\n" \
876 " -C check IDE power mode status\n" \
877 USAGE_GETSET_DMA(" -d get/set using_dma flag\n") \
878 " -D enable/disable drive defect-mgmt\n" \
879 " -f flush buffer cache for device on exit\n" \
880 " -g display drive geometry\n" \
881 " -h display terse usage information\n" \
882 " -i display drive identification\n" \
883 USAGE_HDPARM_IDENT(" -I detailed/current information directly from drive\n") \
884 USAGE_HDPARM_IDENT(" -Istdin similar to -I, but wants /proc/ide/" "*" "/hd?/identify as input\n") \
885 " -k get/set keep_settings_over_reset flag (0/1)\n" \
886 " -K set drive keep_features_over_reset flag (0/1)\n" \
887 " -L set drive doorlock (0/1) (removable harddisks only)\n" \
888 " -m get/set multiple sector count\n" \
889 " -n get/set ignore-write-errors flag (0/1)\n" \
890 " -p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
891 " -P set drive prefetch count\n" \
892 " -q change next setting quietly\n" \
893 " -Q get/set DMA tagged-queuing depth (if supported)\n" \
894 " -r get/set readonly flag (DANGEROUS to set)\n" \
895 USAGE_SCAN_HWIF(" -R register an IDE interface (DANGEROUS)\n") \
896 " -S set standby (spindown) timeout\n" \
897 " -t perform device read timings\n" \
898 " -T perform cache read timings\n" \
899 " -u get/set unmaskirq flag (0/1)\n" \
900 USAGE_UNREGISTER_HWIF(" -U un-register an IDE interface (DANGEROUS)\n") \
901 " -v defaults; same as -mcudkrag for IDE drives\n" \
902 " -V display program version and exit immediately\n" \
903 USAGE_DRIVE_RESET(" -w perform device reset (DANGEROUS)\n") \
904 " -W set drive write-caching flag (0/1) (DANGEROUS)\n" \
905 USAGE_TRISTATE_HWIF(" -x tristate device for hotswap (0/1) (DANGEROUS)\n") \
906 " -X set IDE xfer mode (DANGEROUS)\n" \
907 " -y put IDE drive in standby mode\n" \
908 " -Y put IDE drive to sleep\n" \
909 " -Z disable Seagate auto-powersaving mode\n" \
910 " -z re-read partition table\n"
912 #ifdef CONFIG_FEATURE_FANCY_HEAD
913 #define USAGE_FANCY_HEAD(a) a
915 #define USAGE_FANCY_HEAD(a)
918 #define head_trivial_usage \
919 "[OPTION]... [FILE]..."
920 #define head_full_usage \
921 "Print first 10 lines of each FILE to standard output.\n" \
922 "With more than one FILE, precede each with a header giving the\n" \
923 "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
925 "\t-n NUM\t\tPrint first NUM lines instead of first 10" \
927 "\n\t-c NUM\t\toutput the first NUM bytes\n" \
928 "\t-q\t\tnever output headers giving file names\n" \
929 "\t-v\t\talways output headers giving file names" )
930 #define head_example_usage \
931 "$ head -n 2 /etc/passwd\n" \
932 "root:x:0:0:root:/root:/bin/bash\n" \
933 "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
935 #define hexdump_trivial_usage \
936 "[-[bcdefnosvx]] [OPTION] FILE"
937 #define hexdump_full_usage \
938 "The hexdump utility is a filter which displays the specified files,\n" \
939 "or the standard input, if no files are specified, in a user specified\n"\
941 "\t-b\t\tOne-byte octal display\n" \
942 "\t-c\t\tOne-byte character display\n" \
943 "\t-d\t\tTwo-byte decimal display\n" \
944 "\t-e FORMAT STRING\n" \
945 "\t-f FORMAT FILE\n" \
946 "\t-n LENGTH\tInterpret only length bytes of input\n" \
947 "\t-o\t\tTwo-byte octal display\n" \
948 "\t-s OFFSET\tSkip offset byte\n" \
949 "\t-v\t\tdisplay all input data\n" \
950 "\t-x\t\tTwo-byte hexadecimal display\n"
952 #define hostid_trivial_usage \
954 #define hostid_full_usage \
955 "Print out a unique 32-bit identifier for the machine."
957 #define hostname_trivial_usage \
958 "[OPTION] {hostname | -F FILE}"
959 #define hostname_full_usage \
960 "Get or set the hostname or DNS domain name. If a hostname is given\n" \
961 "(or FILE with the -F parameter), the host name will be set.\n\n" \
964 "\t-i\tAddresses for the hostname\n" \
965 "\t-d\tDNS domain name\n" \
966 "\t-f\tFully qualified domain name\n" \
967 "\t-F FILE\tUse the contents of FILE to specify the hostname"
968 #define hostname_example_usage \
972 #ifdef CONFIG_FEATURE_HTTPD_BASIC_AUTH
973 #define USAGE_HTTPD_BASIC_AUTH(a) a
974 #ifdef CONFIG_FEATURE_HTTPD_AUTH_MD5
975 #define USAGE_HTTPD_AUTH_MD5(a) a
977 #define USAGE_HTTPD_AUTH_MD5(a)
980 #define USAGE_HTTPD_BASIC_AUTH(a)
981 #define USAGE_HTTPD_AUTH_MD5(a)
983 #ifdef CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
984 #define USAGE_HTTPD_STANDALONE(a)
985 #define USAGE_HTTPD_SETUID(a)
987 #define USAGE_HTTPD_STANDALONE(a) a
988 #ifdef CONFIG_FEATURE_HTTPD_SETUID
989 #define USAGE_HTTPD_SETUID(a) a
991 #define USAGE_HTTPD_SETUID(a)
994 #define httpd_trivial_usage \
996 USAGE_HTTPD_STANDALONE(" [-p <port>]") \
997 USAGE_HTTPD_SETUID(" [-u user]") \
998 USAGE_HTTPD_BASIC_AUTH(" [-r <realm>]") \
999 USAGE_HTTPD_AUTH_MD5(" [-m pass]") \
1001 #define httpd_full_usage \
1002 "Listens for incoming http server requests.\n"\
1004 "\t-c FILE\tSpecifies configuration file. (default httpd.conf)\n" \
1005 USAGE_HTTPD_STANDALONE("\t-p PORT\tServer port (default 80)\n") \
1006 USAGE_HTTPD_SETUID("\t-u USER\tSet uid to USER after listening privilegies port\n") \
1007 USAGE_HTTPD_BASIC_AUTH("\t-r REALM\tAuthentication Realm for Basic Authentication\n") \
1008 USAGE_HTTPD_AUTH_MD5("\t-m PASS\tCrypt PASS with md5 algorithm\n") \
1009 "\t-e STRING\tHtml encode STRING\n" \
1010 "\t-d STRING\tURL decode STRING"
1012 #define hwclock_trivial_usage \
1013 "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
1014 #define hwclock_full_usage \
1015 "Query and set the hardware clock (RTC)\n\n" \
1017 "\t-r\tread hardware clock and print result\n" \
1018 "\t-s\tset the system time from the hardware clock\n" \
1019 "\t-w\tset the hardware clock to the current system time\n" \
1020 "\t-u\tthe hardware clock is kept in coordinated universal time\n" \
1021 "\t-l\tthe hardware clock is kept in local time"
1023 #ifdef CONFIG_SELINUX
1024 #define USAGE_SELINUX(a, b) a
1026 #define USAGE_SELINUX(a, b) b
1029 #define id_trivial_usage \
1030 "[OPTIONS]... [USERNAME]"
1031 #define id_full_usage \
1032 "Print information for USERNAME or the current user\n\n" \
1034 "\t-g\tprints only the group ID\n" \
1035 "\t-u\tprints only the user ID\n" \
1036 USAGE_SELINUX("\t-c\tprints only the security context\n", "") \
1037 "\t-n\tprint a name instead of a number (with for -ug)\n" \
1038 "\t-r\tprints the real user ID instead of the effective ID (with -ug)"
1039 #define id_example_usage \
1041 "uid=1000(andersen) gid=1000(andersen)\n"
1043 #ifdef CONFIG_FEATURE_IFCONFIG_SLIP
1044 #define USAGE_SIOCSKEEPALIVE(a) a
1046 #define USAGE_SIOCSKEEPALIVE(a)
1048 #ifdef CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
1049 #define USAGE_IFCONFIG_MII(a) a
1051 #define USAGE_IFCONFIG_MII(a)
1053 #ifdef CONFIG_FEATURE_IFCONFIG_HW
1054 #define USAGE_IFCONFIG_HW(a) a
1056 #define USAGE_IFCONFIG_HW(a)
1058 #ifdef CONFIG_FEATURE_IFCONFIG_STATUS
1059 #define USAGE_IFCONFIG_OPT_A(a) a
1061 #define USAGE_IFCONFIG_OPT_A(a)
1063 #ifdef CONFIG_FEATURE_IPV6
1064 #define USAGE_IPV6(a) a
1066 #define USAGE_IPV6(a)
1069 #define ifconfig_trivial_usage \
1070 USAGE_IFCONFIG_OPT_A("[-a]") " <interface> [<address>]"
1071 #define ifconfig_full_usage \
1072 "configure a network interface\n\n" \
1074 USAGE_IPV6("[add <address>[/<prefixlen>]]\n") \
1075 USAGE_IPV6("[del <address>[/<prefixlen>]]\n") \
1076 "\t[[-]broadcast [<address>]] [[-]pointopoint [<address>]]\n" \
1077 "\t[netmask <address>] [dstaddr <address>]\n" \
1078 USAGE_SIOCSKEEPALIVE("\t[outfill <NN>] [keepalive <NN>]\n") \
1079 "\t" USAGE_IFCONFIG_HW("[hw ether <address>] ") \
1080 "[metric <NN>] [mtu <NN>]\n" \
1081 "\t[[-]trailers] [[-]arp] [[-]allmulti]\n" \
1082 "\t[multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]\n" \
1083 USAGE_IFCONFIG_MII("\t[mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \
1086 #define ifup_trivial_usage \
1087 "<-ahinv> <ifaces...>"
1088 #define ifup_full_usage \
1089 "Usage: ifup <options> <ifaces...>\n\n" \
1091 "\t-h\tthis help\n" \
1092 "\t-a\tde/configure all interfaces automatically\n" \
1093 "\t-i FILE\tuse FILE for interface definitions\n" \
1094 "\t-n\tprint out what would happen, but don't do it\n" \
1095 "\t\t\t(note that this option doesn't disable mappings)\n" \
1096 "\t-v\tprint out what would happen before doing it\n" \
1097 "\t-m\tdon't run any mappings\n" \
1098 "\t-f\tforce de/configuration\n"
1100 #define ifdown_trivial_usage \
1101 "<-ahinv> <ifaces...>"
1102 #define ifdown_full_usage \
1103 "Usage: ifdown <options> <ifaces...>\n\n" \
1105 "\t-h\tthis help\n" \
1106 "\t-a\tde/configure all interfaces automatically\n" \
1107 "\t-i FILE\tuse FILE for interface definitions\n" \
1108 "\t-n\tprint out what would happen, but don't do it\n" \
1109 "\t\t(note that this option doesn't disable mappings)\n" \
1110 "\t-v\tprint out what would happen before doing it\n" \
1111 "\t-m\tdon't run any mappings\n" \
1112 "\t-f\tforce de/configuration\n"
1114 #define inetd_trivial_usage \
1116 #define inetd_full_usage \
1117 "Usage: [-q len] [conf]\n\n" \
1119 "\t-q\tSets the size of the socket listen queue to\n" \
1120 "the specified value. Default is 128."
1122 #define init_trivial_usage \
1124 #define init_full_usage \
1125 "Init is the parent of all processes."
1126 #define init_notes_usage \
1127 "This version of init is designed to be run only by the kernel.\n" \
1129 "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
1130 "the /etc/inittab file is completely ignored by BusyBox init. If you want \n" \
1131 "runlevels, use sysvinit.\n" \
1133 "BusyBox init works just fine without an inittab. If no inittab is found, \n" \
1134 "it has the following default behavior:\n" \
1136 " ::sysinit:/etc/init.d/rcS\n" \
1137 " ::askfirst:/bin/sh\n" \
1138 " ::ctrlaltdel:/sbin/reboot\n" \
1139 " ::shutdown:/sbin/swapoff -a\n" \
1140 " ::shutdown:/bin/umount -a -r\n" \
1141 " ::restart:/sbin/init\n" \
1143 "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
1145 " tty2::askfirst:/bin/sh\n" \
1146 " tty3::askfirst:/bin/sh\n" \
1147 " tty4::askfirst:/bin/sh\n" \
1149 "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
1151 " <id>:<runlevels>:<action>:<process>\n" \
1155 " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
1156 " The id field is used by BusyBox init to specify the controlling tty for\n" \
1157 " the specified process to run on. The contents of this field are\n" \
1158 " appended to "/dev/" and used as-is. There is no need for this field to\n" \
1159 " be unique, although if it isn't you may have strange results. If this\n" \
1160 " field is left blank, the controlling tty is set to the console. Also\n" \
1161 " note that if BusyBox detects that a serial console is in use, then only\n" \
1162 " entries whose controlling tty is either the serial console or /dev/null\n" \
1163 " will be run. BusyBox init does nothing with utmp. We don't need no\n" \
1164 " stinkin' utmp.\n" \
1166 " <runlevels>: \n" \
1168 " The runlevels field is completely ignored.\n" \
1172 " Valid actions include: sysinit, respawn, askfirst, wait, \n" \
1173 " once, restart, ctrlaltdel, and shutdown.\n" \
1175 " The available actions can be classified into two groups: actions\n" \
1176 " that are run only once, and actions that are re-run when the specified\n" \
1177 " process exits.\n" \
1179 " Run only-once actions:\n" \
1181 " 'sysinit' is the first item run on boot. init waits until all\n" \
1182 " sysinit actions are completed before continuing. Following the\n" \
1183 " completion of all sysinit actions, all 'wait' actions are run.\n" \
1184 " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
1185 " the specified task completes. 'once' actions are asynchronous,\n" \
1186 " therefore, init does not wait for them to complete. 'restart' is\n" \
1187 " the action taken to restart the init process. By default this should\n" \
1188 " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
1189 " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
1190 " actions are run when the system detects that someone on the system\n" \
1191 " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
1192 " wants to run 'reboot' at this point to cause the system to reboot.\n" \
1193 " Finally the 'shutdown' action specifies the actions to taken when\n" \
1194 " init is told to reboot. Unmounting filesystems and disabling swap\n" \
1195 " is a very good here\n" \
1197 " Run repeatedly actions:\n" \
1199 " 'respawn' actions are run after the 'once' actions. When a process\n" \
1200 " started with a 'respawn' action exits, init automatically restarts\n" \
1201 " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
1202 " respawning out of control. The 'askfirst' actions acts just like\n" \
1203 " respawn, except that before running the specified process it\n" \
1204 " displays the line "Please press Enter to activate this console."\n" \
1205 " and then waits for the user to press enter before starting the\n" \
1206 " specified process. \n" \
1208 " Unrecognized actions (like initdefault) will cause init to emit an\n" \
1209 " error message, and then go along with its business. All actions are\n" \
1210 " run in the order they appear in /etc/inittab.\n" \
1214 " Specifies the process to be executed and it's command line.\n" \
1216 "Example /etc/inittab file:\n" \
1218 " # This is run first except when booting in single-user mode.\n" \
1220 " ::sysinit:/etc/init.d/rcS\n" \
1222 " # /bin/sh invocations on selected ttys\n" \
1224 " # Start an "askfirst" shell on the console (whatever that may be)\n" \
1225 " ::askfirst:-/bin/sh\n" \
1226 " # Start an "askfirst" shell on /dev/tty2-4\n" \
1227 " tty2::askfirst:-/bin/sh\n" \
1228 " tty3::askfirst:-/bin/sh\n" \
1229 " tty4::askfirst:-/bin/sh\n" \
1231 " # /sbin/getty invocations for selected ttys\n" \
1233 " tty4::respawn:/sbin/getty 38400 tty4\n" \
1234 " tty5::respawn:/sbin/getty 38400 tty5\n" \
1237 " # Example of how to put a getty on a serial line (for a terminal)\n" \
1239 " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
1240 " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
1242 " # Example how to put a getty on a modem line.\n" \
1243 " #::respawn:/sbin/getty 57600 ttyS2\n" \
1245 " # Stuff to do when restarting the init process\n" \
1246 " ::restart:/sbin/init\n" \
1248 " # Stuff to do before rebooting\n" \
1249 " ::ctrlaltdel:/sbin/reboot\n" \
1250 " ::shutdown:/bin/umount -a -r\n" \
1251 " ::shutdown:/sbin/swapoff -a\n"
1253 #ifdef CONFIG_FEATURE_INSMOD_LOAD_MAP
1254 #define USAGE_INSMOD_MAP(a) a
1256 #define USAGE_INSMOD_MAP(a)
1258 #define insmod_trivial_usage \
1259 "[OPTION]... MODULE [symbol=value]..."
1260 #define insmod_full_usage \
1261 "Loads the specified kernel modules into the kernel.\n\n" \
1263 "\t-f\tForce module to load into the wrong kernel version.\n" \
1264 "\t-k\tMake module autoclean-able.\n" \
1265 "\t-v\tverbose output\n" \
1266 "\t-L\tLock to prevent simultaneous loads of a module\n" \
1267 USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout") \
1268 "\t-x\tdo not export externs\n"
1270 #define install_trivial_usage \
1271 "[cgmops] [sources] <dest|directory>"
1272 #define install_full_usage \
1273 "copy files and set attributes\n\n" \
1275 "\t-c\tcopy the file, default\n" \
1276 "\t-g\tset group ownership\n" \
1277 "\t-m\tset permission modes\n" \
1278 "\t-o\tset ownership\n" \
1279 "\t-p\tpreserve date\n" \
1280 "\t-s\tstrip symbol tables\n"
1282 #define ip_trivial_usage \
1283 "[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }"
1284 #define ip_full_usage \
1285 "ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \
1286 "where OBJECT := { link | addr | route | tunnel }\n" \
1287 "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }\n"
1289 #define ipaddr_trivial_usage \
1290 "{ {add|del} IFADDR dev STRING | {show|flush} [ dev STRING ] [ to PREFIX ] }"
1291 #define ipaddr_full_usage \
1292 "ipaddr {add|del} IFADDR dev STRING\n" \
1293 "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
1294 " [ to PREFIX ] [ label PATTERN ]\n" \
1295 "IFADDR := PREFIX | ADDR peer PREFIX\n" \
1296 " [ broadcast ADDR ] [ anycast ADDR ]\n" \
1297 " [ label STRING ] [ scope SCOPE-ID ]\n" \
1298 "SCOPE-ID := [ host | link | global | NUMBER ]\n"
1300 #ifndef CONFIG_FEATURE_IPCALC_FANCY
1301 #define ipcalc_trivial_usage \
1302 "[--broadcast] [--netmask] [--network] ipaddr <netmask>"
1304 #define ipcalc_full_usage \
1305 "Calculate IP network settings from a IP address\n\n" \
1307 "\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \
1308 "\t-n\t--netmask\tDisplay default netmask for IP.\n" \
1309 "\t-w\t--network\tDisplay calculated network address."
1311 #define ipcalc_trivial_usage \
1312 "[OPTION]... ipaddr <netmask>"
1314 #define ipcalc_full_usage \
1315 "Calculate IP network settings from a IP address\n\n" \
1317 "\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \
1318 "\t-n\t--netmask\tDisplay default netmask for IP.\n" \
1319 "\t-w\t--network\tDisplay calculated network address.\n" \
1320 "\t-h\t--hostname\tDisplay first resolved host name.\n" \
1321 "\t-s\t--silent\tDon't ever display error messages."
1324 #define ipcalc_notes_usage \
1325 "ipcalc provides a simple way to calculate IP information for\n" \
1326 "a host. The various options specify what information ipcalc\n" \
1327 "should display on standard out. Multiple options may be\n" \
1330 #define iplink_trivial_usage \
1331 "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
1332 #define iplink_full_usage \
1333 "iplink set DEVICE { up | down | arp { on | off } |\n" \
1334 " dynamic { on | off } |\n" \
1336 "iplink show [ DEVICE ]\n"
1338 #define iproute_trivial_usage \
1339 "{ list | flush | { add | del | change | append | replace | monitor } ROUTE }"
1340 #define iproute_full_usage \
1341 "iproute { list | flush } SELECTOR\n" \
1342 "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
1343 " [ oif STRING ] [ tos TOS ]\n" \
1344 "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
1345 "SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
1346 "ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]\n"
1348 #define iptunnel_trivial_usage \
1349 "{ add | change | del | show } [ NAME ] [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
1350 #define iptunnel_full_usage \
1351 "iptunnel { add | change | del | show } [ NAME ]\n" \
1352 " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
1353 " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
1354 " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]\n"
1356 #define insmod_ng_trivial_usage \
1357 "MODULE [symbol=value]..."
1358 #define insmod_ng_full_usage \
1359 "Loads the specified kernel modules into the kernel."
1361 #define kill_trivial_usage \
1362 "[-signal] process-id [process-id ...]"
1363 #define kill_full_usage \
1364 "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
1366 "\t-l\tList all signal names and numbers."
1367 #define kill_example_usage \
1368 "$ ps | grep apache\n" \
1369 "252 root root S [apache]\n" \
1370 "263 www-data www-data S [apache]\n" \
1371 "264 www-data www-data S [apache]\n" \
1372 "265 www-data www-data S [apache]\n" \
1373 "266 www-data www-data S [apache]\n" \
1374 "267 www-data www-data S [apache]\n" \
1377 #define killall_trivial_usage \
1378 "[-signal] process-name [process-name ...]"
1379 #define killall_full_usage \
1380 "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
1382 "\t-l\tList all signal names and numbers."
1383 #define killall_example_usage \
1384 "$ killall apache\n"
1386 #define klogd_trivial_usage \
1388 #define klogd_full_usage \
1391 "\t-c n\tSets the default log level of console messages to n.\n"\
1392 "\t-n\tRun as a foreground process."
1394 #define length_trivial_usage \
1396 #define length_full_usage \
1397 "Prints out the length of the specified STRING."
1398 #define length_example_usage \
1399 "$ length Hello\n" \
1402 #define ln_trivial_usage \
1403 "[OPTION] TARGET... LINK_NAME|DIRECTORY"
1404 #define ln_full_usage \
1405 "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n"\
1406 "\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \
1408 "\t-s\tmake symbolic links instead of hard links\n" \
1409 "\t-f\tremove existing destination files\n" \
1410 "\t-n\tno dereference symlinks - treat like normal file"
1411 #define ln_example_usage \
1412 "$ ln -s BusyBox /tmp/ls\n" \
1413 "$ ls -l /tmp/ls\n" \
1414 "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
1416 #define loadfont_trivial_usage \
1418 #define loadfont_full_usage \
1419 "Loads a console font from standard input."
1420 #define loadfont_example_usage \
1421 "$ loadfont < /etc/i18n/fontname\n"
1423 #define loadkmap_trivial_usage \
1425 #define loadkmap_full_usage \
1426 "Loads a binary keyboard translation table from standard input."
1427 #define loadkmap_example_usage \
1428 "$ loadkmap < /etc/i18n/lang-keymap\n"
1430 #define logger_trivial_usage \
1431 "[OPTION]... [MESSAGE]"
1432 #define logger_full_usage \
1433 "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \
1435 "\t-s\tLog to stderr as well as the system log.\n" \
1436 "\t-t\tLog using the specified tag (defaults to user name).\n" \
1437 "\t-p\tEnter the message with the specified priority.\n" \
1438 "\t\tThis may be numerical or a ``facility.level'' pair."
1439 #define logger_example_usage \
1440 "$ logger "hello"\n"
1442 #define login_trivial_usage \
1443 "[OPTION]... [username] [ENV=VAR ...]"
1444 #define login_full_usage \
1445 "Begin a new session on the system\n\n" \
1447 "\t-f\tDo not authenticate (user already authenticated)\n" \
1448 "\t-h\tName of the remote host for this login.\n" \
1449 "\t-p\tPreserve environment."
1451 #define logname_trivial_usage \
1453 #define logname_full_usage \
1454 "Print the name of the current user."
1455 #define logname_example_usage \
1459 #define logread_trivial_usage \
1462 #define logread_full_usage \
1463 "Shows the messages from syslogd (using circular buffer).\n\n"
1465 "\t-f\t\toutput data as the log grows"
1467 #define losetup_trivial_usage \
1468 "[OPTION]... LOOPDEVICE FILE\n" \
1469 "or: losetup [OPTION]... -d LOOPDEVICE"
1470 #define losetup_full_usage \
1471 "Associate LOOPDEVICE with FILE.\n\n" \
1473 "\t-d\t\tDisassociate LOOPDEVICE.\n" \
1474 "\t-o OFFSET\tStart OFFSET bytes into FILE.\n"
1476 #ifdef CONFIG_FEATURE_LS_TIMESTAMPS
1477 #define USAGE_LS_TIMESTAMPS(a) a
1479 #define USAGE_LS_TIMESTAMPS(a)
1481 #ifdef CONFIG_FEATURE_LS_FILETYPES
1482 #define USAGE_LS_FILETYPES(a) a
1484 #define USAGE_LS_FILETYPES(a)
1486 #ifdef CONFIG_FEATURE_LS_FOLLOWLINKS
1487 #define USAGE_LS_FOLLOWLINKS(a) a
1489 #define USAGE_LS_FOLLOWLINKS(a)
1491 #ifdef CONFIG_FEATURE_LS_RECURSIVE
1492 #define USAGE_LS_RECURSIVE(a) a
1494 #define USAGE_LS_RECURSIVE(a)
1496 #ifdef CONFIG_FEATURE_LS_SORTFILES
1497 #define USAGE_LS_SORTFILES(a) a
1499 #define USAGE_LS_SORTFILES(a)
1501 #ifdef CONFIG_FEATURE_AUTOWIDTH
1502 #define USAGE_AUTOWIDTH(a) a
1504 #define USAGE_AUTOWIDTH(a)
1506 #define ls_trivial_usage \
1507 "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USAGE_HUMAN_READABLE("h") USAGE_NOT_HUMAN_READABLE("") "k" USAGE_SELINUX("K", "") "] [filenames...]"
1508 #define ls_full_usage \
1509 "List directory contents\n\n" \
1511 "\t-1\tlist files in a single column\n" \
1512 "\t-A\tdo not list implied . and ..\n" \
1513 "\t-a\tdo not hide entries starting with .\n" \
1514 "\t-C\tlist entries by columns\n" \
1515 USAGE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \
1516 "\t-d\tlist directory entries instead of contents\n" \
1517 USAGE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \
1518 USAGE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \
1519 "\t-i\tlist the i-node for each file\n" \
1520 "\t-l\tuse a long listing format\n" \
1521 "\t-n\tlist numeric UIDs and GIDs instead of names\n" \
1522 USAGE_LS_FILETYPES("\t-p\tappend indicator (one of /=@|) to entries\n") \
1523 USAGE_LS_FOLLOWLINKS("\t-L\tlist entries pointed to by symbolic links\n") \
1524 USAGE_LS_RECURSIVE("\t-R\tlist subdirectories recursively\n") \
1525 USAGE_LS_SORTFILES("\t-r\tsort the listing in reverse order\n") \
1526 USAGE_LS_SORTFILES("\t-S\tsort the listing by file size\n") \
1527 "\t-s\tlist the size of each file, in blocks\n" \
1528 USAGE_AUTOWIDTH("\t-T NUM\tassume Tabstop every NUM columns\n") \
1529 USAGE_LS_TIMESTAMPS("\t-t\twith -l: show modification time\n") \
1530 USAGE_LS_TIMESTAMPS("\t-u\twith -l: show access time\n") \
1531 USAGE_LS_SORTFILES("\t-v\tsort the listing by version\n") \
1532 USAGE_AUTOWIDTH("\t-w NUM\tassume the terminal is NUM columns wide\n") \
1533 "\t-x\tlist entries by lines instead of by columns\n" \
1534 USAGE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \
1535 USAGE_HUMAN_READABLE( \
1536 "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
1537 USAGE_SELINUX("\t-k\tprint security context\n\t-K\tprint security context in long format\n", ""))
1539 #define lsmod_trivial_usage \
1541 #define lsmod_full_usage \
1542 "List the currently loaded kernel modules."
1544 #define makedevs_trivial_usage \
1545 "NAME TYPE MAJOR MINOR FIRST LAST [s]"
1546 #define makedevs_full_usage \
1547 "Creates a range of block or character special files\n\n" \
1548 "TYPEs include:\n" \
1549 "\tb:\tMake a block (buffered) device.\n" \
1550 "\tc or u:\tMake a character (un-buffered) device.\n" \
1551 "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes.\n\n" \
1552 "FIRST specifies the number appended to NAME to create the first device.\n" \
1553 "LAST specifies the number of the last item that should be created.\n" \
1554 "If 's' is the last argument, the base device is created as well.\n\n" \
1556 "\tmakedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \
1557 "\tmakedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
1558 #define makedevs_example_usage \
1559 "$ makedevs /dev/ttyS c 4 66 2 63\n" \
1560 "[creates ttyS2-ttyS63]\n" \
1561 "$ makedevs /dev/hda b 3 0 0 8 s\n" \
1562 "[creates hda,hda1-hda8]\n"
1564 #ifdef CONFIG_FEATURE_MD5_SHA1_SUM_CHECK
1565 #define USAGE_MD5_SHA1_SUM_CHECK(a) a
1567 #define USAGE_MD5_SHA1_SUM_CHECK(a)
1570 #define md5sum_trivial_usage \
1571 "[OPTION] [FILEs...]" \
1572 USAGE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
1573 #define md5sum_full_usage \
1574 "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums.\n\n" \
1576 "With no FILE, or when FILE is -, read standard input." \
1577 USAGE_MD5_SHA1_SUM_CHECK("\n\n" \
1578 "\t-c\tcheck MD5 sums against given list\n" \
1579 "\nThe following two options are useful only when verifying checksums:\n" \
1580 "\t-s\tdon't output anything, status code shows success\n" \
1581 "\t-w\twarn about improperly formated MD5 checksum lines")
1582 #define md5sum_example_usage \
1583 "$ md5sum < busybox\n" \
1584 "6fd11e98b98a58f64ff3398d7b324003\n" \
1585 "$ md5sum busybox\n" \
1586 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
1588 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
1592 #define mesg_trivial_usage \
1594 #define mesg_full_usage \
1595 "mesg [Y|N], controls write access to your terminal\n" \
1596 "\ty\tAllow write access to your terminal.\n" \
1597 "\tn\tDisallow write access to your terminal.\n"
1599 #define minit_trivial_usage \
1601 #define minit_full_usage \
1604 #define mkdir_trivial_usage \
1605 "[OPTION] DIRECTORY..."
1606 #define mkdir_full_usage \
1607 "Create the DIRECTORY(ies) if they do not already exist\n\n" \
1609 "\t-m\tset permission mode (as in chmod), not rwxrwxrwx - umask\n" \
1610 "\t-p\tno error if existing, make parent directories as needed"
1611 #define mkdir_example_usage \
1612 "$ mkdir /tmp/foo\n" \
1613 "$ mkdir /tmp/foo\n" \
1614 "/tmp/foo: File exists\n" \
1615 "$ mkdir /tmp/foo/bar/baz\n" \
1616 "/tmp/foo/bar/baz: No such file or directory\n" \
1617 "$ mkdir -p /tmp/foo/bar/baz\n"
1619 #define mkfifo_trivial_usage \
1621 #define mkfifo_full_usage \
1622 "Creates a named pipe (identical to 'mknod name p')\n\n" \
1624 "\t-m\tcreate the pipe using the specified mode (default a=rw)"
1626 #define mkfs_minix_trivial_usage \
1627 "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
1628 #define mkfs_minix_full_usage \
1629 "Make a MINIX filesystem.\n\n" \
1631 "\t-c\t\tCheck the device for bad blocks\n" \
1632 "\t-n [14|30]\tSpecify the maximum length of filenames\n" \
1633 "\t-i INODES\tSpecify the number of inodes for the filesystem\n" \
1634 "\t-l FILENAME\tRead the bad blocks list from FILENAME\n" \
1635 "\t-v\t\tMake a Minix version 2 filesystem"
1637 #define mknod_trivial_usage \
1638 "[OPTIONS] NAME TYPE MAJOR MINOR"
1639 #define mknod_full_usage \
1640 "Create a special file (block, character, or pipe).\n\n" \
1642 "\t-m\tcreate the special file using the specified mode (default a=rw)\n\n" \
1643 "TYPEs include:\n" \
1644 "\tb:\tMake a block (buffered) device.\n" \
1645 "\tc or u:\tMake a character (un-buffered) device.\n" \
1646 "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes."
1647 #define mknod_example_usage \
1648 "$ mknod /dev/fd0 b 2 0 \n" \
1649 "$ mknod -m 644 /tmp/pipe p\n"
1651 #define mkswap_trivial_usage \
1652 "[-c] [-v0|-v1] device [block-count]"
1653 #define mkswap_full_usage \
1654 "Prepare a disk partition to be used as a swap partition.\n\n" \
1656 "\t-c\t\tCheck for read-ability.\n" \
1657 "\t-v0\t\tMake version 0 swap [max 128 Megs].\n" \
1658 "\t-v1\t\tMake version 1 swap [big!] (default for kernels >\n\t\t\t2.1.117).\n" \
1659 "\tblock-count\tNumber of block to use (default is entire partition)."
1661 #define mktemp_trivial_usage \
1663 #define mktemp_full_usage \
1664 "Creates a temporary file with its name based on TEMPLATE.\n" \
1665 "TEMPLATE is any name with six `Xs' (i.e., /tmp/temp.XXXXXX)."
1666 #define mktemp_example_usage \
1667 "$ mktemp /tmp/temp.XXXXXX\n" \
1668 "/tmp/temp.mWiLjM\n" \
1669 "$ ls -la /tmp/temp.mWiLjM\n" \
1670 "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
1672 #define modprobe_trivial_usage \
1674 #define modprobe_full_usage \
1675 "Used for high level module loading and unloading."
1676 #define modprobe_example_usage \
1677 "$ modprobe cdrom\n"
1679 #define more_trivial_usage \
1681 #define more_full_usage \
1682 "More is a filter for viewing FILE one screenful at a time."
1683 #define more_example_usage \
1686 #ifdef CONFIG_FEATURE_MOUNT_LOOP
1687 #define USAGE_MOUNT_LOOP(a) a
1689 #define USAGE_MOUNT_LOOP(a)
1691 #ifdef CONFIG_FEATURE_MTAB_SUPPORT
1692 #define USAGE_MTAB(a) a
1694 #define USAGE_MTAB(a)
1696 #define mount_trivial_usage \
1697 "[flags] DEVICE NODE [-o options,more-options]"
1698 #define mount_full_usage \
1699 "Mount a filesystem\n\n" \
1701 "\t-a:\t\tMount all filesystems in fstab.\n" \
1703 "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it.\n" \
1704 "\t-n:\t\tDon't write a mount table entry.\n" \
1706 "\t-o option:\tOne of many filesystem options, listed below.\n" \
1707 "\t-r:\t\tMount the filesystem read-only.\n" \
1708 "\t-t fs-type:\tSpecify the filesystem type.\n" \
1709 "\t-w:\t\tMount for reading and writing (default).\n" \
1711 "Options for use with the \"-o\" flag:\n" \
1712 "\tasync/sync:\tWrites are asynchronous / synchronous.\n" \
1713 "\tatime/noatime:\tEnable / disable updates to inode access times.\n" \
1714 "\tdev/nodev:\tAllow use of special device files / disallow them.\n" \
1715 "\texec/noexec:\tAllow use of executable files / disallow them.\n" \
1717 "\tloop:\t\tMounts a file via loop device.\n" \
1719 "\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them.\n" \
1720 "\tremount:\tRe-mount a mounted filesystem, changing its flags.\n" \
1721 "\tro/rw:\t\tMount for read-only / read-write.\n" \
1722 "\tbind:\t\tUse the linux 2.4.x \"bind\" feature.\n" \
1723 "\nThere are EVEN MORE flags that are specific to each filesystem.\n" \
1724 "You'll have to see the written documentation for those filesystems."
1725 #define mount_example_usage \
1727 "/dev/hda3 on / type minix (rw)\n" \
1728 "proc on /proc type proc (rw)\n" \
1729 "devpts on /dev/pts type devpts (rw)\n" \
1730 "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
1731 "$ mount /tmp/diskimage /opt -t ext2 -o loop\n"
1733 #define msvc_trivial_usage \
1734 "-[udorspchaitkx] service"
1735 #define msvc_full_usage \
1736 "[option] service\n" \
1737 "Where option is one of\n" \
1738 "\t-u\tUp. If the service is not running, start it. If the service stops, restart it.\n" \
1739 "\t-d\tDown. If the service is running, stop it, do not restart it.\n" \
1740 "\t-o\tOnce. If the service is not running, start it. Do not restart it if it stops.\n" \
1741 "\t-r\tTell supervise that the service is normally running; this affects status messages.\n" \
1742 "\t-s\tTell supervise that the service is normally stopped; this affects status messages.\n" \
1743 "\t-p\tPause. Send the service a STOP signal.\n" \
1744 "\t-c\tContinue. Send the service a CONT signal.\n" \
1745 "\t-h\tHangup. Send the service a HUP signal.\n" \
1746 "\t-a\tAlarm. Send the service an ALRM signal.\n" \
1747 "\t-i\tInterrupt. Send the service an INT signal.\n" \
1748 "\t-t\tTerminate. Send the service a TERM signal.\n" \
1749 "\t-k\tKill. Send the service a KILL signal.\n" \
1750 "\t-x\tExit. supervise will quit as soon as the service is down.\n"
1752 #define mt_trivial_usage \
1753 "[-f device] opcode value"
1754 #define mt_full_usage \
1755 "Control magnetic tape drive operation\n" \
1756 "\nAvailable Opcodes:\n\n" \
1757 "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
1758 "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
1759 "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
1760 "setpart tell unload unlock weof wset"
1762 #define mv_trivial_usage \
1764 "or: mv SOURCE... DIRECTORY"
1765 #define mv_full_usage \
1766 "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY."
1767 #define mv_example_usage \
1768 "$ mv /tmp/foo /bin/bar\n"
1770 #define nameif_trivial_usage \
1771 "[-s] [-c FILE] [{IFNAME MACADDR}]"
1772 #define nameif_full_usage \
1773 "Nameif renaming network interface while it in the down state.\n\n" \
1775 "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \
1776 "\t-s\t\tUse syslog (LOCAL0 facility).\n" \
1777 "\tIFNAME MACADDR\tnew_interface_name interface_mac_address\n"
1778 #define nameif_example_usage \
1779 "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
1781 "$ nameif -c /etc/my_mactab_file\n" \
1783 #define nc_trivial_usage \
1784 "[OPTIONS] [IP] [port]"
1785 #define nc_full_usage \
1786 "Netcat opens a pipe to IP:port\n\n" \
1788 "\t-l\t\tlisten mode, for inbound connects\n" \
1789 "\t-p PORT\t\tlocal port number\n" \
1790 "\t-i SECS\t\tdelay interval for lines sent\n" \
1791 "\t-e PROG\t\tprogram to exec after connect (dangerous!)"
1792 #define nc_example_usage \
1793 "$ nc foobar.somedomain.com 25\n" \
1794 "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
1796 "214-Commands supported:\n" \
1797 "214- HELO EHLO MAIL RCPT DATA AUTH\n" \
1798 "214 NOOP QUIT RSET HELP\n" \
1800 "221 foobar closing connection\n"
1802 #define netstat_trivial_usage \
1804 #define netstat_full_usage \
1805 "-l display listening server sockets\n" \
1806 "-a display all sockets (default: connected)\n" \
1807 "-e display other/more information\n" \
1808 "-n don't resolve names\n" \
1809 "-r display routing table\n" \
1810 "-t tcp sockets\n" \
1811 "-u udp sockets\n" \
1812 "-w raw sockets\n" \
1815 #define nslookup_trivial_usage \
1817 #define nslookup_full_usage \
1818 "Queries the nameserver for the IP address of the given HOST\n" \
1819 "optionally using a specified DNS server"
1820 #define nslookup_example_usage \
1821 "$ nslookup localhost\n" \
1822 "Server: default\n" \
1823 "Address: default\n" \
1826 "Address: 127.0.0.1\n"
1828 #define od_trivial_usage \
1829 "[-aBbcDdeFfHhIiLlOovXx] [FILE]"
1830 #define od_full_usage \
1831 "Write an unambiguous representation, octal bytes by default, of FILE\n"\
1832 "to standard output. With no FILE, or when FILE is -, read standard input."
1834 #define openvt_trivial_usage \
1835 "<vtnum> <COMMAND> [ARGS...]"
1836 #define openvt_full_usage \
1837 "Start a command on a new virtual terminal"
1838 #define openvt_example_usage \
1839 "openvt 2 /bin/ash\n"
1841 #ifdef CONFIG_FEATURE_SHA1_PASSWORDS
1842 #define PASSWORD_ALG_TYPES(a) a
1844 #define PASSWORD_ALG_TYPES(a)
1846 #define passwd_trivial_usage \
1848 #define passwd_full_usage \
1849 "Change a user password. If no name is specified,\n" \
1850 "changes the password for the current user.\n" \
1852 "\t-a\tDefine which algorithm shall be used for the password.\n" \
1853 "\t\t\t(Choices: des, md5" \
1854 PASSWORD_ALG_TYPES(", sha1") \
1855 ")\n\t-d\tDelete the password for the specified user account.\n" \
1856 "\t-l\tLocks (disables) the specified user account.\n" \
1857 "\t-u\tUnlocks (re-enables) the specified user account."
1859 #define patch_trivial_usage \
1861 #define patch_full_usage \
1863 #define patch_example_usage \
1864 "$ patch -p1 <example.diff"
1866 #define pidfilehack_trivial_usage \
1867 "[daemon.pid] [daemon]"
1868 #define pidfilehack_full_usage \
1869 "service /var/run/daemon.pid /usr/sbin/daemon args...\n"
1871 #define pidof_trivial_usage \
1872 "process-name [process-name ...]"
1873 #define pidof_full_usage \
1874 "Lists the PIDs of all processes with names that match the names on the command line"
1875 #define pidof_example_usage \
1879 #ifndef CONFIG_FEATURE_FANCY_PING
1880 #define ping_trivial_usage "host"
1881 #define ping_full_usage "Send ICMP ECHO_REQUEST packets to network hosts"
1883 #define ping_trivial_usage \
1885 #define ping_full_usage \
1886 "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
1888 "\t-c COUNT\tSend only COUNT pings.\n" \
1889 "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
1890 "\t-q\t\tQuiet mode, only displays output at start\n" \
1891 "\t\t\tand when finished."
1893 #define ping_example_usage \
1894 "$ ping localhost\n" \
1895 "PING slag (127.0.0.1): 56 data bytes\n" \
1896 "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
1898 "--- debian ping statistics ---\n" \
1899 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
1900 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
1902 #ifndef CONFIG_FEATURE_FANCY_PING6
1903 #define ping6_trivial_usage "host"
1904 #define ping6_full_usage "Send ICMP ECHO_REQUEST packets to network hosts"
1906 #define ping6_trivial_usage \
1908 #define ping6_full_usage \
1909 "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
1911 "\t-c COUNT\tSend only COUNT pings.\n" \
1912 "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
1913 "\t-q\t\tQuiet mode, only displays output at start\n" \
1914 "\t\t\tand when finished."
1916 #define ping6_example_usage \
1917 "$ ping6 ip6-localhost\n" \
1918 "PING ip6-localhost (::1): 56 data bytes\n" \
1919 "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
1921 "--- ip6-localhost ping statistics ---\n" \
1922 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
1923 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
1925 #define pivot_root_trivial_usage \
1927 #define pivot_root_full_usage \
1928 "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
1929 "the new root file system."
1931 #define poweroff_trivial_usage \
1933 #define poweroff_full_usage \
1934 "Halt the system and request that the kernel shut off the power."
1936 #define printf_trivial_usage \
1937 "FORMAT [ARGUMENT...]"
1938 #define printf_full_usage \
1939 "Formats and prints ARGUMENT(s) according to FORMAT,\n" \
1940 "Where FORMAT controls the output exactly as in C printf."
1941 #define printf_example_usage \
1942 "$ printf "Val=%d\\n" 5\n" \
1945 #define ps_trivial_usage \
1947 #define ps_full_usage \
1948 "Report process status\n" \
1949 USAGE_SELINUX("\nOptions:\n\t-c\tshow SE Linux context", "\nThis version of ps accepts no options.")
1951 #define ps_example_usage \
1953 " PID Uid Gid State Command\n" \
1954 " 1 root root S init\n" \
1955 " 2 root root S [kflushd]\n" \
1956 " 3 root root S [kupdate]\n" \
1957 " 4 root root S [kpiod]\n" \
1958 " 5 root root S [kswapd]\n" \
1959 " 742 andersen andersen S [bash]\n" \
1960 " 743 andersen andersen S -bash\n" \
1961 " 745 root root S [getty]\n" \
1962 " 2990 andersen andersen R ps\n"
1964 #define pwd_trivial_usage \
1966 #define pwd_full_usage \
1967 "Print the full filename of the current working directory."
1968 #define pwd_example_usage \
1972 #define raid_start_trivial_usage \
1973 "MD_DEVICE DISK_DEVICE"
1974 #define raid_start_full_usage \
1975 "Start MD_DEVICE, taking superblock from DISK_DEVICE.\n" \
1976 "Example: raid_start /dev/md0 /dev/sdb"
1978 #define rdate_trivial_usage \
1980 #define rdate_full_usage \
1981 "Get and possibly set the system date and time from a remote HOST.\n\n" \
1983 "\t-s\tSet the system date and time (default).\n" \
1984 "\t-p\tPrint the date and time."
1986 #define readlink_trivial_usage \
1988 #define readlink_full_usage \
1989 "Read a symbolic link."
1991 #define realpath_trivial_usage \
1993 #define realpath_full_usage \
1994 "return the canonicalized absolute pathnames of given arguments\n\n"
1996 #define reboot_trivial_usage \
1998 #define reboot_full_usage \
1999 "Reboot the system."
2001 #define renice_trivial_usage \
2002 "priority pid [pid ...]"
2003 #define renice_full_usage \
2004 "Changes priority of running processes. Allowed priorities range\n" \
2005 "from 20 (the process runs only when nothing else is running) to 0\n" \
2006 "(default priority) to -20 (almost nothing else ever gets to run)."
2008 #define reset_trivial_usage \
2010 #define reset_full_usage \
2011 "Resets the screen."
2013 #define rm_trivial_usage \
2014 "[OPTION]... FILE..."
2015 #define rm_full_usage \
2016 "Remove (unlink) the FILE(s). You may use '--' to\n" \
2017 "indicate that all following arguments are non-options.\n\n" \
2019 "\t-i\t\talways prompt before removing each destination\n" \
2020 "\t-f\t\tremove existing destinations, never prompt\n" \
2021 "\t-r or -R\tremove the contents of directories recursively"
2022 #define rm_example_usage \
2023 "$ rm -rf /tmp/foo\n"
2025 #define rmdir_trivial_usage \
2026 "[OPTION]... DIRECTORY..."
2027 #define rmdir_full_usage \
2028 "Remove the DIRECTORY(ies), if they are empty."
2029 #define rmdir_example_usage \
2030 "# rmdir /tmp/foo\n"
2032 #define rmmod_trivial_usage \
2033 "[OPTION]... [MODULE]..."
2034 #define rmmod_full_usage \
2035 "Unloads the specified kernel modules from the kernel.\n\n" \
2037 "\t-a\tRemove all unused modules (recursively)"
2038 #define rmmod_example_usage \
2041 #define route_trivial_usage \
2043 #define route_full_usage \
2044 "Edit the kernel's routing tables.\n\n" \
2046 "\t-n\tDont resolve names.\n" \
2047 "\t-e\tDisplay other/more information"
2049 #define rpm_trivial_usage \
2050 "-i -q[ildc]p package.rpm"
2051 #define rpm_full_usage \
2052 "Manipulates RPM packages" \
2054 "\n\t-i Install package" \
2055 "\n\t-q Query package" \
2056 "\n\t-p Query uninstalled package" \
2057 "\n\t-i Show information" \
2058 "\n\t-l List contents" \
2059 "\n\t-d List documents" \
2060 "\n\t-c List config files"
2062 #define rpm2cpio_trivial_usage \
2064 #define rpm2cpio_full_usage \
2065 "Outputs a cpio archive of the rpm file."
2067 #define run_parts_trivial_usage \
2068 "[-t] [-a ARG] [-u MASK] DIRECTORY"
2069 #define run_parts_full_usage \
2070 "Run a bunch of scripts in a directory.\n\n" \
2072 "\t-t\t\tTest only what file will be executed, without execute them.\n" \
2073 "\t-a ARG\tPass ARG as an argument for every program invoked.\n" \
2074 "\t-u MASK\tSet the umask to MASK before executing every program."
2076 #define rx_trivial_usage \
2078 #define rx_full_usage \
2079 "Receive a file using the xmodem protocol."
2080 #define rx_example_usage \
2083 #define sed_trivial_usage \
2084 "[-nef] pattern [files...]"
2085 #define sed_full_usage \
2087 "\t-n\t\tsuppress automatic printing of pattern space\n" \
2088 "\t-e script\tadd the script to the commands to be executed\n" \
2089 "\t-f scriptfile\tadd the contents of script-file to the commands to be executed\n" \
2091 "If no -e or -f is given, the first non-option argument is taken as the\n" \
2092 "sed script to interpret. All remaining arguments are names of input\n" \
2093 "files; if no input files are specified, then the standard input is read."
2094 #define sed_example_usage \
2095 "$ echo "foo" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
2098 #define seq_trivial_usage \
2099 "[first [increment]] last"
2100 #define seq_full_usage \
2101 "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \
2102 "FIRST, INCREMENT default to 1\n" \
2106 "\tFIRST\tINCREMENT\tLAST\n"
2108 #define setkeycodes_trivial_usage \
2109 "SCANCODE KEYCODE ..."
2110 #define setkeycodes_full_usage \
2111 "Set entries into the kernel's scancode-to-keycode map,\n" \
2112 "allowing unusual keyboards to generate usable keycodes.\n\n" \
2113 "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
2114 "and KEYCODE is given in decimal"
2115 #define setkeycodes_example_usage \
2116 "$ setkeycodes e030 127\n"
2118 #define lash_trivial_usage \
2120 "or: sh -c command [args]..."
2121 #define lash_full_usage \
2122 "The BusyBox LAme SHell (command interpreter)"
2123 #define lash_notes_usage \
2124 "This command does not yet have proper documentation.\n" \
2126 "Use lash just as you would use any other shell. It properly handles pipes,\n" \
2127 "redirects, job control, can be used as the shell for scripts, and has a\n" \
2128 "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
2129 "Bourne Shell syntax. If you need things like "if-then-else", "while", and such\n" \
2130 "use ash or bash. If you just need a very simple and extremely small shell,\n" \
2131 "this will do the job."
2133 #define last_trivial_usage \
2135 #define last_full_usage \
2136 "Shows listing of the last users that logged into the system"
2138 #define sha1sum_trivial_usage \
2139 "[OPTION] [FILEs...]" \
2140 USAGE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
2141 #define sha1sum_full_usage \
2142 "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n\n" \
2144 "With no FILE, or when FILE is -, read standard input." \
2145 USAGE_MD5_SHA1_SUM_CHECK("\n\n" \
2146 "\t-c\tcheck SHA1 sums against given list\n" \
2147 "\nThe following two options are useful only when verifying checksums:\n" \
2148 "\t-s\tdon't output anything, status code shows success\n" \
2149 "\t-w\twarn about improperly formated SHA1 checksum lines")
2151 #ifdef CONFIG_FEATURE_FANCY_SLEEP
2152 #define USAGE_FANCY_SLEEP(a) a
2153 #define USAGE_NOT_FANCY_SLEEP(a)
2155 #define USAGE_FANCY_SLEEP(a)
2156 #define USAGE_NOT_FANCY_SLEEP(a) a
2159 #define sleep_trivial_usage \
2160 USAGE_FANCY_SLEEP("[") "N" USAGE_FANCY_SLEEP("]...")
2161 #define sleep_full_usage \
2162 USAGE_NOT_FANCY_SLEEP("Pause for N seconds.") \
2163 USAGE_FANCY_SLEEP( \
2164 "Pause for a time equal to the total of the args given, where each arg can\n" \
2165 "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
2166 #define sleep_example_usage \
2168 "[2 second delay results]\n" \
2169 USAGE_FANCY_SLEEP("$ sleep 1d 3h 22m 8s\n" \
2170 "[98528 second delay results]\n")
2172 #ifdef CONFIG_FEATURE_SORT_UNIQUE
2173 #define USAGE_SORT_UNIQUE(a) a
2175 #define USAGE_SORT_UNIQUE(a)
2177 #ifdef CONFIG_FEATURE_SORT_REVERSE
2178 #define USAGE_SORT_REVERSE(a) a
2180 #define USAGE_SORT_REVERSE(a)
2182 #define sort_trivial_usage \
2183 "[-n" USAGE_SORT_REVERSE("r") USAGE_SORT_UNIQUE("u") "] [FILE]..."
2184 #define sort_full_usage \
2185 "Sorts lines of text in the specified files\n\n"\
2187 USAGE_SORT_UNIQUE("\t-u\tsuppress duplicate lines\n") \
2188 USAGE_SORT_REVERSE("\t-r\tsort in reverse order\n") \
2189 "\t-n\tsort numerics"
2190 #define sort_example_usage \
2191 "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
2199 #define start_stop_daemon_trivial_usage \
2201 #define start_stop_daemon_full_usage \
2202 "Program to start and stop services.\n"\
2206 "-b\t\t\tforce process into background (daemonize)\n"\
2207 "-x <executable>\t\tprogram to start/check if it is running\n"\
2208 "-u <username>|<uid>\tstop this user's processes\n"\
2209 "-n <process-name>\tstop processes with this name\n"\
2210 "-s <signal>\t\tsignal to send (default 15)\n"\
2211 "-a <pathname>\t\tprogram to start (default <executable>)\n"
2213 #define strings_trivial_usage \
2214 "[-afo] [-n length] [file ... ]"
2215 #define strings_full_usage \
2216 "Display printable strings in a binary file." \
2218 "\n\t-f\tPrecede each string with the name of the file where it was found." \
2219 "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \
2220 "\n\t-o\tEach string is preceded by its decimal offset in the file."
2222 #define stty_trivial_usage \
2223 "[-a|g] [-F DEVICE] [SETTING]..."
2224 #define stty_full_usage \
2225 "Without arguments, prints baud rate, line discipline," \
2226 "\nand deviations from stty sane." \
2228 "\n\t-F DEVICE\topen device instead of stdin" \
2229 "\n\t-a\t\tprint all current settings in human-readable form" \
2230 "\n\t-g\t\tprint in stty-readable form" \
2231 "\n\t[SETTING]\tsee manpage"
2233 #define su_trivial_usage \
2234 "[OPTION]... [-] [username]"
2235 #define su_full_usage \
2236 "Change user id or become root.\n" \
2238 "\t-p\tPreserve environment"
2240 #define sulogin_trivial_usage \
2241 "[OPTION]... [tty-device]"
2242 #define sulogin_full_usage \
2243 "Single user login\n" \
2245 "\t-f\tDo not authenticate (user already authenticated)\n" \
2246 "\t-h\tName of the remote host for this login.\n" \
2247 "\t-p\tPreserve environment."
2249 #define swapoff_trivial_usage \
2251 #define swapoff_full_usage \
2252 "Stop swapping virtual memory pages on DEVICE.\n\n" \
2254 "\t-a\tStop swapping on all swap devices"
2256 #define swapon_trivial_usage \
2258 #define swapon_full_usage \
2259 "Start swapping virtual memory pages on DEVICE.\n\n" \
2261 "\t-a\tStart swapping on all swap devices"
2263 #define sync_trivial_usage \
2265 #define sync_full_usage \
2266 "Write all buffered filesystem blocks to disk."
2269 #ifdef CONFIG_FEATURE_ROTATE_LOGFILE
2270 #define USAGE_ROTATE_LOGFILE(a) a
2272 #define USAGE_ROTATE_LOGFILE(a)
2274 #ifdef CONFIG_FEATURE_REMOTE_LOG
2275 #define USAGE_REMOTE_LOG(a) a
2277 #define USAGE_REMOTE_LOG(a)
2279 #ifdef CONFIG_FEATURE_IPC_SYSLOG
2280 #define USAGE_IPC_LOG(a) a
2282 #define USAGE_IPC_LOG(a)
2285 #ifdef CONFIG_SYSCTL
2286 #define sysctl_trivial_usage \
2287 "[OPTIONS]... [VALUE]...\n"
2288 #define sysctl_full_usage
2289 "sysctl - configure kernel parameters at runtime\n\n" \
2291 "\t-n\tUse this option to disable printing of the key name when printing values.\n" \
2292 "\t-e\tUse this option to ignore errors about unknown keys.\n" \
2293 "\t-w\tUse this option when you want to change a sysctl setting.\n" \
2294 "\t-p\tLoad in sysctl settings from the file specified or /etc/sysctl.conf if none given.\n" \
2295 "\t-a\tDisplay all values currently available.\n" \
2296 "\t-A\tDisplay all values currently available in table form."
2298 #define sysctl_example_usage
2299 "sysctl [-n] [-e] variable ...\n" \
2300 "sysctl [-n] [-e] -w variable=value ...\n" \
2301 "sysctl [-n] [-e] -a\n" \
2302 "sysctl [-n] [-e] -p <file>\t(default /etc/sysctl.conf)\n" \
2303 "sysctl [-n] [-e] -A\n"
2306 #define syslogd_trivial_usage \
2308 #define syslogd_full_usage \
2309 "Linux system and kernel logging utility.\n" \
2310 "Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \
2312 "\t-m NUM\t\tInterval between MARK lines (default=20min, 0=off)\n" \
2313 "\t-n\t\tRun as a foreground process\n" \
2314 "\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)" \
2315 USAGE_ROTATE_LOGFILE( \
2316 "\n\t-s SIZE\t\tMax size (KB) bevor rotate (default=200KB, 0=off)\n" \
2317 "\t-b NUM\t\tNumber of rotated log files (default=1, 0=purge log)") \
2319 "\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \
2320 "\t-L\t\tLog locally and via network logging (default is network only)") \
2322 "\n\t-C [size(KiB)]\tLog to a circular buffer (read the buffer using logread)")
2323 #define syslogd_example_usage \
2324 "$ syslogd -R masterlog:514\n" \
2325 "$ syslogd -R 192.168.1.1:601\n"
2328 #ifndef CONFIG_FEATURE_FANCY_TAIL
2329 #define USAGE_UNSIMPLE_TAIL(a)
2331 #define USAGE_UNSIMPLE_TAIL(a) a
2333 #define tail_trivial_usage \
2334 "[OPTION]... [FILE]..."
2335 #define tail_full_usage \
2336 "Print last 10 lines of each FILE to standard output.\n" \
2337 "With more than one FILE, precede each with a header giving the\n" \
2338 "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
2340 USAGE_UNSIMPLE_TAIL("\t-c N[kbm]\toutput the last N bytes\n") \
2341 "\t-n N[kbm]\tprint last N lines instead of last 10\n" \
2342 "\t-f\t\toutput data as the file grows" \
2343 USAGE_UNSIMPLE_TAIL( "\n\t-q\t\tnever output headers giving file names\n" \
2344 "\t-s SEC\t\twait SEC seconds between reads with -f\n" \
2345 "\t-v\t\talways output headers giving file names\n\n" \
2346 "If the first character of N (bytes or lines) is a '+', output begins with \n" \
2347 "the Nth item from the start of each file, otherwise, print the last N items\n" \
2348 "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
2349 #define tail_example_usage \
2350 "$ tail -n 1 /etc/resolv.conf\n" \
2351 "nameserver 10.0.0.1\n"
2353 #ifdef CONFIG_FEATURE_TAR_CREATE
2354 #define USAGE_TAR_CREATE(a) a
2356 #define USAGE_TAR_CREATE(a)
2358 #ifdef CONFIG_FEATURE_TAR_EXCLUDE
2359 #define USAGE_TAR_EXCLUDE(a) a
2361 #define USAGE_TAR_EXCLUDE(a)
2363 #ifdef CONFIG_FEATURE_TAR_GZIP
2364 #define USAGE_TAR_GZIP(a) a
2366 #define USAGE_TAR_GZIP(a)
2368 #ifdef CONFIG_FEATURE_TAR_BZIP2
2369 #define USAGE_TAR_BZIP2(a) a
2371 #define USAGE_TAR_BZIP2(a)
2373 #ifdef CONFIG_FEATURE_TAR_COMPRESS
2374 #define USAGE_TAR_COMPRESS(a) a
2376 #define USAGE_TAR_COMPRESS(a)
2379 #define tar_trivial_usage \
2380 "-[" USAGE_TAR_CREATE("c") USAGE_TAR_GZIP("z") USAGE_TAR_BZIP2("j") USAGE_TAR_COMPRESS("Z") "xtvO] " \
2381 USAGE_TAR_EXCLUDE("[-X FILE]") \
2382 "[-f TARFILE] [-C DIR] [FILE(s)] ..."
2383 #define tar_full_usage \
2384 "Create, extract, or list files from a tar file.\n\n" \
2386 USAGE_TAR_CREATE("\tc\t\tcreate\n") \
2387 "\tx\t\textract\n" \
2389 "\nArchive format selection:\n" \
2390 USAGE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \
2391 USAGE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \
2392 USAGE_TAR_COMPRESS("\tZ\t\tFilter the archive through compress\n") \
2393 "\nFile selection:\n" \
2394 "\tf\t\tname of TARFILE or \"-\" for stdin\n" \
2395 "\tO\t\textract to stdout\n" \
2396 USAGE_TAR_EXCLUDE( \
2397 "\texclude\t\tfile to exclude\n" \
2398 "\tX\t\tfile with names to exclude\n" \
2400 "\tC\t\tchange to directory DIR before operation\n" \
2401 "\tv\t\tverbosely list files processed"
2402 #define tar_example_usage \
2403 "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
2404 "$ tar -cf /tmp/tarball.tar /usr/local\n"
2406 #define tee_trivial_usage \
2407 "[OPTION]... [FILE]..."
2408 #define tee_full_usage \
2409 "Copy standard input to each FILE, and also to standard output.\n\n" \
2411 "\t-a\tappend to the given FILEs, do not overwrite\n" \
2412 "\t-i\tignore interrupt signals (SIGINT)"
2413 #define tee_example_usage \
2414 "$ echo "Hello" | tee /tmp/foo\n" \
2415 "$ cat /tmp/foo\n" \
2418 #ifdef CONFIG_FEATURE_TELNET_AUTOLOGIN
2419 #define telnet_trivial_usage \
2420 "[-a] [-l USER] HOST [PORT]"
2421 #define telnet_full_usage \
2422 "Telnet is used to establish interactive communication with another\n" \
2423 "computer over a network using the TELNET protocol.\n\n" \
2425 "\t-a\t\tAttempt an automatic login with the USER variable.\n" \
2426 "\t-l USER\t\tAttempt an automatic login with the USER argument.\n" \
2427 "\tHOST\t\tThe official name, alias or the IP address of the\n" \
2428 "\t\t\tremote host.\n" \
2429 "\tPORT\t\tThe remote port number to connect to. If it is not\n" \
2430 "\t\t\tspecified, the default telnet (23) port is used.\n"
2432 #define telnet_trivial_usage \
2434 #define telnet_full_usage \
2435 "Telnet is used to establish interactive communication with another\n"\
2436 "computer over a network using the TELNET protocol."
2439 #ifdef CONFIG_FEATURE_TELNETD_INETD
2440 #define telnetd_trivial_usage \
2441 "(inetd mode) [OPTION]"
2442 #define telnetd_full_usage \
2443 "Telnetd uses incoming TELNET connections via inetd.\n"\
2445 "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)"
2447 #define telnetd_trivial_usage \
2449 #define telnetd_full_usage \
2450 "Telnetd listens for incoming TELNET connections on PORT.\n"\
2452 "\t-p PORT\tlisten for connections on PORT (default 23)\n"\
2453 "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)"
2456 #define test_trivial_usage \
2457 "EXPRESSION\n or [ EXPRESSION ]"
2458 #define test_full_usage \
2459 "Checks file types and compares values returning an exit\n" \
2460 "code determined by the value of EXPRESSION."
2461 #define test_example_usage \
2462 "$ test 1 -eq 2\n" \
2465 "$ test 1 -eq 1\n" \
2471 "$ [ -d /junk ]\n" \
2475 #ifdef CONFIG_FEATURE_TFTP_GET
2476 #define USAGE_TFTP_GET(a) a
2478 #define USAGE_TFTP_GET(a)
2480 #ifdef CONFIG_FEATURE_TFTP_PUT
2481 #define USAGE_TFTP_PUT(a) a
2483 #define USAGE_TFTP_PUT(a)
2485 #ifdef CONFIG_FEATURE_TFTP_BLOCKSIZE
2486 #define USAGE_TFTP_BS(a) a
2488 #define USAGE_TFTP_BS(a)
2491 #define tftp_trivial_usage \
2492 "[OPTION]... HOST [PORT]"
2493 #define tftp_full_usage \
2494 "Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \
2496 "\t-l FILE\tLocal FILE.\n" \
2497 "\t-r FILE\tRemote FILE.\n" \
2499 "\t-g\tGet file.\n" \
2502 "\t-p\tPut file.\n" \
2505 "\t-b SIZE\tTransfer blocks of SIZE octets.\n" \
2507 #define time_trivial_usage \
2508 "[OPTION]... COMMAND [ARGS...]"
2509 #define time_full_usage \
2510 "Runs the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
2511 "COMMAND's resource usage information is displayed\n\n" \
2513 "\t-v\tDisplays verbose resource usage information."
2515 #define top_trivial_usage \
2517 #define top_full_usage \
2518 "top provides an view of processor activity in real time.\n" \
2519 "This utility reads the status for all processes in /proc each <seconds>\n" \
2520 "and shows the status for however many processes will fit on the screen.\n" \
2521 "This utility will not show processes that are started after program startup,\n" \
2522 "but it will show the EXIT status for and PIDs that exit while it is running."
2524 #define touch_trivial_usage \
2525 "[-c] FILE [FILE ...]"
2526 #define touch_full_usage \
2527 "Update the last-modified date on the given FILE[s].\n\n" \
2529 "\t-c\tDo not create any files"
2530 #define touch_example_usage \
2531 "$ ls -l /tmp/foo\n" \
2532 "/bin/ls: /tmp/foo: No such file or directory\n" \
2533 "$ touch /tmp/foo\n" \
2534 "$ ls -l /tmp/foo\n" \
2535 "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
2537 #define tr_trivial_usage \
2538 "[-cds] STRING1 [STRING2]"
2539 #define tr_full_usage \
2540 "Translate, squeeze, and/or delete characters from\n" \
2541 "standard input, writing to standard output.\n\n" \
2543 "\t-c\ttake complement of STRING1\n" \
2544 "\t-d\tdelete input characters coded STRING1\n" \
2545 "\t-s\tsqueeze multiple output characters of STRING2 into one character"
2546 #define tr_example_usage \
2547 "$ echo "gdkkn vnqkc" | tr [a-y] [b-z]\n" \
2550 #define traceroute_trivial_usage \
2551 "[-dnrv] [-m max_ttl] [-p port#] [-q nqueries]\n\
2552 [-s src_addr] [-t tos] [-w wait] host [data size]"
2553 #define traceroute_full_usage \
2554 "trace the route ip packets follow going to \"host\"\n" \
2556 "\t-d\tset SO_DEBUG options to socket\n" \
2557 "\t-n\tPrint hop addresses numerically rather than symbolically\n" \
2558 "\t-r\tBypass the normal routing tables and send directly to a host\n" \
2559 "\t-v\tVerbose output\n" \
2560 "\t-m max_ttl\tSet the max time-to-live (max number of hops)\n" \
2561 "\t-p port#\tSet the base UDP port number used in probes\n" \
2562 "\t\t(default is 33434)\n" \
2563 "\t-q nqueries\tSet the number of probes per ``ttl'' to nqueries\n" \
2564 "\t\t(default is 3)\n" \
2565 "\t-s src_addr\tUse the following IP address as the source address\n" \
2566 "\t-t tos\tSet the type-of-service in probe packets to the following value\n" \
2567 "\t\t(default 0)\n" \
2568 "\t-w wait\tSet the time (in seconds) to wait for a response to a probe\n" \
2569 "\t\t(default 3 sec.)."
2572 #define true_trivial_usage \
2574 #define true_full_usage \
2575 "Return an exit code of TRUE (0)."
2576 #define true_example_usage \
2581 #define tty_trivial_usage \
2583 #define tty_full_usage \
2584 "Print the file name of the terminal connected to standard input.\n\n"\
2586 "\t-s\tprint nothing, only return an exit status"
2587 #define tty_example_usage \
2591 #define udhcpc_trivial_usage \
2592 "[-fbnqv] [-c CLIENTID] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
2593 #define udhcpc_full_usage \
2594 "\t-c,\t--clientid=CLIENTID\tClient identifier\n" \
2595 "\t-H,\t--hostname=HOSTNAME\tClient hostname\n" \
2596 "\t-h,\t \tAlias for -H\n" \
2597 "\t-f,\t--foreground\tDo not fork after getting lease\n" \
2598 "\t-b,\t--background\tFork to background if lease cannot be immediately negotiated.\n" \
2599 "\t-i,\t--interface=INTERFACE\tInterface to use (default: eth0)\n" \
2600 "\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated.\n" \
2601 "\t-p,\t--pidfile=file\tStore process ID of daemon in file\n" \
2602 "\t-q,\t--quit\tQuit after obtaining lease\n" \
2603 "\t-r,\t--request=IP\tIP address to request (default: none)\n" \
2604 "\t-s,\t--script=file\tRun file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \
2605 "\t-v,\t--version\tDisplay version"
2607 #define udhcpd_trivial_usage \
2610 #define udhcpd_full_usage \
2613 #ifdef CONFIG_FEATURE_MOUNT_FORCE
2614 #define USAGE_MOUNT_FORCE(a) a
2616 #define USAGE_MOUNT_FORCE(a)
2618 #define umount_trivial_usage \
2619 "[flags] FILESYSTEM|DIRECTORY"
2620 #define umount_full_usage \
2621 "Unmount file systems\n" \
2622 "\nFlags:\n" "\t-a\tUnmount all file systems" \
2623 USAGE_MTAB(" in /etc/mtab\n\t-n\tDon't erase /etc/mtab entries") \
2624 "\n\t-r\tTry to remount devices as read-only if mount is busy" \
2625 USAGE_MOUNT_FORCE("\n\t-f\tForce umount (i.e., unreachable NFS server)") \
2626 USAGE_MOUNT_LOOP("\n\t-l\tDo not free loop device (if a loop device has been used)")
2627 #define umount_example_usage \
2628 "$ umount /dev/hdc1 \n"
2630 #define uname_trivial_usage \
2632 #define uname_full_usage \
2633 "Print certain system information. With no OPTION, same as -s.\n\n" \
2635 "\t-a\tprint all information\n" \
2636 "\t-m\tthe machine (hardware) type\n" \
2637 "\t-n\tprint the machine's network node hostname\n" \
2638 "\t-r\tprint the operating system release\n" \
2639 "\t-s\tprint the operating system name\n" \
2640 "\t-p\tprint the host processor type\n" \
2641 "\t-v\tprint the operating system version"
2642 #define uname_example_usage \
2644 "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
2646 #define uncompress_trivial_usage \
2647 "[-c] [-f] [ name ... ]"
2648 #define uncompress_full_usage \
2649 "Uncompress .Z file[s]\n" \
2651 "\t-c\textract to stdout\n" \
2652 "\t-f\tforce overwrite an existing file\n"
2654 #define uniq_trivial_usage \
2655 "[OPTION]... [INPUT [OUTPUT]]"
2656 #define uniq_full_usage \
2657 "Discard all but one of successive identical lines from INPUT\n" \
2658 "(or standard input), writing to OUTPUT (or standard output).\n\n" \
2660 "\t-c\tprefix lines by the number of occurrences\n" \
2661 "\t-d\tonly print duplicate lines\n" \
2662 "\t-u\tonly print unique lines\n" \
2663 "\t-f N\tskip the first N fields\n" \
2664 "\t-s N\tskip the first N chars (after any skipped fields)"
2665 #define uniq_example_usage \
2666 "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
2671 #define unix2dos_trivial_usage \
2673 #define unix2dos_full_usage \
2674 "Converts FILE from unix format to dos format. When no option\n" \
2675 "is given, the input is converted to the opposite output format.\n" \
2676 "When no file is given, uses stdin for input and stdout for output.\n" \
2678 "\t-u\toutput will be in UNIX format\n" \
2679 "\t-d\toutput will be in DOS format"
2681 #define unzip_trivial_usage \
2682 "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
2683 #define unzip_full_usage \
2684 "Extracts files from ZIP archives.\n\n" \
2686 "\t-l\tlist archive contents (short form)\n" \
2687 "\t-n\tnever overwrite existing files (default)\n" \
2688 "\t-o\toverwrite files without prompting\n" \
2689 "\t-p\tsend output to stdout\n" \
2690 "\t-q\tbe quiet\n" \
2691 "\t-x\texclude these files\n" \
2692 "\t-d\textract files into this directory"
2694 #define uptime_trivial_usage \
2696 #define uptime_full_usage \
2697 "Display the time since the last boot."
2698 #define uptime_example_usage \
2700 " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
2702 #define usleep_trivial_usage \
2704 #define usleep_full_usage \
2705 "Pause for N microseconds."
2706 #define usleep_example_usage \
2707 "$ usleep 1000000\n" \
2708 "[pauses for 1 second]\n"
2710 #define uudecode_trivial_usage \
2712 #define uudecode_full_usage \
2713 "Uudecode a file that is uuencoded.\n\n" \
2715 "\t-o FILE\tdirect output to FILE"
2716 #define uudecode_example_usage \
2717 "$ uudecode -o busybox busybox.uu\n" \
2718 "$ ls -l busybox\n" \
2719 "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
2721 #define uuencode_trivial_usage \
2722 "[OPTION] [INFILE] REMOTEFILE"
2723 #define uuencode_full_usage \
2724 "Uuencode a file.\n\n" \
2726 "\t-m\tuse base64 encoding per RFC1521"
2727 #define uuencode_example_usage \
2728 "$ uuencode busybox busybox\n" \
2729 "begin 755 busybox\n" \
2730 "<encoded file snipped>\n" \
2731 "$ uudecode busybox busybox > busybox.uu\n" \
2734 #define vconfig_trivial_usage \
2735 "COMMAND [OPTIONS] ..."
2737 #define vconfig_full_usage \
2738 "Usage: add [interface-name] [vlan_id] \n" \
2739 " rem [vlan-name] \n" \
2740 " set_flag [interface-name] [flag-num] [0 | 1] \n" \
2741 " set_egress_map [vlan-name] [skb_priority] [vlan_qos] \n" \
2742 " set_ingress_map [vlan-name] [skb_priority] [vlan_qos] \n" \
2743 " set_name_type [name-type] \n"
2745 #define vi_trivial_usage \
2746 "[OPTION] [FILE]..."
2747 #define vi_full_usage \
2750 "\t-R\tRead-only- do not write to the file."
2752 #define vlock_trivial_usage \
2754 #define vlock_full_usage \
2755 "Lock a virtual terminal. A password is required to unlock\n" \
2757 "\t-a\tLock all VTs"
2759 #define watch_trivial_usage \
2760 "[-n <seconds>] COMMAND..."
2761 #define watch_full_usage \
2762 "Executes a program periodically.\n" \
2764 "\t-n\tLoop period in seconds - default is 2."
2765 #define watch_example_usage \
2767 "Mon Dec 17 10:31:40 GMT 2000\n" \
2768 "Mon Dec 17 10:31:42 GMT 2000\n" \
2769 "Mon Dec 17 10:31:44 GMT 2000"
2771 #define watchdog_trivial_usage \
2772 "[-t <seconds>] DEV"
2773 #define watchdog_full_usage \
2774 "Periodically write to watchdog device DEV.\n" \
2776 "\t-t\tTimer period in seconds - default is 30."
2778 #define wc_trivial_usage \
2779 "[OPTION]... [FILE]..."
2780 #define wc_full_usage \
2781 "Print line, word, and byte counts for each FILE, and a total line if\n" \
2782 "more than one FILE is specified. With no FILE, read standard input.\n\n" \
2784 "\t-c\tprint the byte counts\n" \
2785 "\t-l\tprint the newline counts\n" \
2786 "\t-L\tprint the length of the longest line\n" \
2787 "\t-w\tprint the word counts"
2788 #define wc_example_usage \
2789 "$ wc /etc/passwd\n" \
2790 " 31 46 1365 /etc/passwd\n"
2792 #define wget_trivial_usage \
2793 "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url"
2794 #define wget_full_usage \
2795 "wget retrieves files via HTTP or FTP\n\n" \
2797 "\t-c\tcontinue retrieval of aborted transfers\n" \
2798 "\t-q\tquiet mode - do not print\n" \
2799 "\t-P\tSet directory prefix to DIR\n" \
2800 "\t-O\tsave to filename ('-' for stdout)\n" \
2801 "\t-Y\tuse proxy ('on' or 'off')"
2803 #define which_trivial_usage \
2805 #define which_full_usage \
2806 "Locates a COMMAND."
2807 #define which_example_usage \
2811 #define who_trivial_usage \
2813 #define who_full_usage \
2814 "Prints the current user names and related information"
2816 #define whoami_trivial_usage \
2818 #define whoami_full_usage \
2819 "Prints the user name associated with the current effective user id."
2821 #ifdef CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION
2822 #define USAGE_XARGS_CONFIRMATION(a) a
2824 #define USAGE_XARGS_CONFIRMATION(a)
2826 #ifdef CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT
2827 #define USAGE_XARGS_TERMOPT(a) a
2829 #define USAGE_XARGS_TERMOPT(a)
2831 #ifdef CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM
2832 #define USAGE_XARGS_ZERO_TERM(a) a
2834 #define USAGE_XARGS_ZERO_TERM(a)
2838 #define xargs_trivial_usage \
2839 "[COMMAND] [OPTIONS] [ARGS...]"
2840 #define xargs_full_usage \
2841 "Executes COMMAND on every item given by standard input.\n\n" \
2843 USAGE_XARGS_CONFIRMATION("\t-p\tPrompt the user about whether to run each command\n") \
2844 "\t-r\tDo not run command for empty readed lines\n" \
2845 USAGE_XARGS_TERMOPT("\t-x\tExit if the size is exceeded\n") \
2846 USAGE_XARGS_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \
2847 "\t-t\tPrint the command line on stderr before executing it."
2848 #define xargs_example_usage \
2849 "$ ls | xargs gzip\n" \
2850 "$ find . -name '*.c' -print | xargs rm\n"
2852 #define yes_trivial_usage \
2853 "[OPTION]... [STRING]..."
2854 #define yes_full_usage \
2855 "Repeatedly outputs a line with all specified STRING(s), or 'y'."
2857 #define zcat_trivial_usage \
2859 #define zcat_full_usage \
2860 "Uncompress to stdout."