4 #define addgroup_trivial_usage \
5 "[-g GID] group_name [user_name]"
6 #define addgroup_full_usage \
7 "Adds a group to the system" \
9 "\t-g GID\t\tspecify gid"
11 #define adduser_trivial_usage \
13 #define adduser_full_usage \
14 "Adds a user to the system" \
16 "\t-h DIR\t\tAssign home directory DIR\n" \
17 "\t-g GECOS\tAssign gecos field GECOS\n" \
18 "\t-s SHELL\tAssign login shell SHELL\n" \
19 "\t-G\t\tAdd the user to existing group GROUP\n" \
20 "\t-S\t\tcreate a system user (ignored)\n" \
21 "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \
22 "\t-H\t\tDo not create the home directory"
24 #define adjtimex_trivial_usage \
25 "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
26 #define adjtimex_full_usage \
27 "Reads and optionally sets system timebase parameters.\n" \
28 "See adjtimex(2).\n\n" \
30 "\t-q\t\tquiet mode - do not print\n" \
31 "\t-o offset\ttime offset, microseconds\n" \
32 "\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \
33 "\t\t\t(positive values make the system clock run fast)\n" \
34 "\t-t tick\t\tmicroseconds per tick, usually 10000\n" \
37 #define ar_trivial_usage \
38 "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
39 #define ar_full_usage \
40 "Extract or list FILES from an ar archive.\n\n" \
42 "\t-o\t\tpreserve original dates\n" \
43 "\t-p\t\textract to stdout\n" \
46 "\t-v\t\tverbosely list files processed"
48 #define arping_trivial_usage \
49 "[-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target\n"
50 #define arping_full_usage \
51 "Ping hosts by ARP requests/replies.\n\n" \
53 "\t-f\t\tQuit on first ARP reply\n" \
54 "\t-q\t\tBe quiet\n" \
55 "\t-b\t\tKeep broadcasting, don't go unicast\n" \
56 "\t-D\t\tDuplicated address detection mode\n" \
57 "\t-U\t\tUnsolicited ARP mode, update your neighbours\n" \
58 "\t-A\t\tARP answer mode, update your neighbours\n" \
59 "\t-c count\tStop after sending count ARP request packets\n" \
60 "\t-w timeout\tTime to wait for ARP reply, in seconds\n" \
61 "\t-I device\tOutgoing interface name, default is eth0\n" \
62 "\t-s sender\tSet specific sender IP address\n" \
63 "\ttarget\t\tTarget IP address of ARP request"
65 #define ash_trivial_usage \
67 "or: ash -c command [args]...\n"
68 #define ash_full_usage \
69 "The ash shell (command interpreter)"
71 #define awk_trivial_usage \
72 "[OPTION]... [program-text] [FILE ...]"
73 #define awk_full_usage \
75 "\t-v var=val\t\tassign value 'val' to variable 'var'\n" \
76 "\t-F sep\t\tuse 'sep' as field separator\n" \
77 "\t-f progname\t\tread program source from file 'progname'"
79 #define basename_trivial_usage \
81 #define basename_full_usage \
82 "Strips directory path and suffixes from FILE.\n" \
83 "If specified, also removes any trailing SUFFIX."
84 #define basename_example_usage \
85 "$ basename /usr/local/bin/foo\n" \
87 "$ basename /usr/local/bin/\n" \
89 "$ basename /foo/bar.txt .txt\n" \
92 #define bunzip2_trivial_usage \
94 #define bunzip2_full_usage \
95 "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \
97 "\t-c\tWrite output to standard output\n" \
100 #define bzcat_trivial_usage \
102 #define bzcat_full_usage \
103 "Uncompress to stdout."
105 #define cal_trivial_usage \
106 "[-jy] [[month] year]"
107 #define cal_full_usage \
108 "Display a calendar.\n" \
110 "\t-j\tUse julian dates.\n" \
111 "\t-y\tDisplay the entire year."
113 #define cat_trivial_usage \
115 #define cat_full_usage \
116 "Concatenates FILE(s) and prints them to stdout.\n\n" \
118 "\t-u\tignored since unbuffered i/o is always used"
119 #define cat_example_usage \
120 "$ cat /proc/uptime\n" \
123 #define chgrp_trivial_usage \
124 "[OPTION]... GROUP FILE..."
125 #define chgrp_full_usage \
126 "Change the group membership of each FILE to GROUP.\n" \
128 "\t-R\tChanges files and directories recursively."
129 #define chgrp_example_usage \
130 "$ ls -l /tmp/foo\n" \
131 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
132 "$ chgrp root /tmp/foo\n" \
133 "$ ls -l /tmp/foo\n" \
134 "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
136 #define chmod_trivial_usage \
137 "[-R] MODE[,MODE]... FILE..."
138 #define chmod_full_usage \
139 "Each MODE is one or more of the letters ugoa, one of the\n" \
140 "symbols +-= and one or more of the letters rwxst.\n\n" \
142 "\t-R\tChanges files and directories recursively."
143 #define chmod_example_usage \
144 "$ ls -l /tmp/foo\n" \
145 "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
146 "$ chmod u+x /tmp/foo\n" \
147 "$ ls -l /tmp/foo\n" \
148 "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
149 "$ chmod 444 /tmp/foo\n" \
150 "$ ls -l /tmp/foo\n" \
151 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
153 #define chown_trivial_usage \
154 "[ -Rh ]... OWNER[<.|:>[GROUP]] FILE..."
155 #define chown_full_usage \
156 "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \
158 "\t-R\tChanges files and directories recursively.\n" \
159 "\t-h\tDo not dereference symbolic links."
160 #define chown_example_usage \
161 "$ ls -l /tmp/foo\n" \
162 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
163 "$ chown root /tmp/foo\n" \
164 "$ ls -l /tmp/foo\n" \
165 "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
166 "$ chown root.root /tmp/foo\n" \
168 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
170 #define chroot_trivial_usage \
171 "NEWROOT [COMMAND...]"
172 #define chroot_full_usage \
173 "Run COMMAND with root directory set to NEWROOT."
174 #define chroot_example_usage \
175 "$ ls -l /bin/ls\n" \
176 "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
177 "# mount /dev/hdc1 /mnt -t minix\n" \
179 "# ls -l /bin/ls\n" \
180 "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
182 #define chvt_trivial_usage \
184 #define chvt_full_usage \
185 "Changes the foreground virtual terminal to /dev/ttyN"
187 #define clear_trivial_usage \
189 #define clear_full_usage \
192 #define cmp_trivial_usage \
193 "[-l] [-s] FILE1 [FILE2]"
194 #define cmp_full_usage \
195 "Compare files. Compares FILE1 vs stdin if FILE2 is not specified.\n\n" \
197 "\t-l\tWrite the byte numbers (decimal) and values (octal)\n" \
198 "\t\t for all differing bytes.\n" \
199 "\t-s\tquiet mode - do not print"
201 #define cp_trivial_usage \
202 "[OPTION]... SOURCE DEST"
203 #define cp_full_usage \
204 "Copies SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" \
206 "\t-a\tSame as -dpR\n" \
207 "\t-d\tPreserves links\n" \
208 "\t-p\tPreserves file attributes if possible\n" \
209 "\t-f\tforce (implied; ignored) - always set\n" \
210 "\t-i\tinteractive, prompt before overwrite\n" \
211 "\t-R,-r\tCopies directories recursively"
213 #define cpio_trivial_usage \
214 "-[dimtuv][F cpiofile]"
215 #define cpio_full_usage \
216 "Extract or list files from a cpio archive\n" \
217 "Main operation mode:\n" \
218 "\td\t\tmake leading directories\n" \
220 "\tm\t\tpreserve mtime\n" \
222 "\tu\t\tunconditional overwrite\n" \
223 "\tF\t\tinput from file"
225 #define crond_trivial_usage \
226 "-d[#] -c <crondir> -f -b"
227 #define crond_full_usage \
228 "\t-d [#] -l [#] -S -L logfile -f -b -c dir\n" \
229 "\t-d num\tdebug level\n" \
230 "\t-l num\tlog level (8 - default)\n" \
231 "\t-S\tlog to syslod (default)\n" \
232 "\t-L file\tlog to file\n" \
233 "\t-f\trun in fordeground\n" \
234 "\t-b\trun in background (default)\n" \
235 "\t-c dir\tworking dir"
237 #define crontab_trivial_usage \
238 "[-c dir] {file|-}|[-u|-l|-e|-d user]"
239 #define crontab_full_usage \
240 "\tfile <opts> replace crontab from file\n" \
241 "\t- <opts> replace crontab from stdin\n" \
242 "\t-u user specify user\n" \
243 "\t-l [user] list crontab for user\n" \
244 "\t-e [user] edit crontab for user\n" \
245 "\t-d [user] delete crontab for user\n" \
246 "\t-c dir specify crontab directory"
249 #define cut_trivial_usage \
250 "[OPTION]... [FILE]..."
251 #define cut_full_usage \
252 "Prints selected fields from each input FILE to standard output.\n\n" \
254 "\t-b LIST\t\tOutput only bytes from LIST\n" \
255 "\t-c LIST\t\tOutput only characters from LIST\n" \
256 "\t-d CHAR\t\tUse CHAR instead of tab as the field delimiter\n" \
257 "\t-s\t\tOutput only the lines containing delimiter\n" \
258 "\t-f N\t\tPrint only these fields\n" \
260 #define cut_example_usage \
261 "$ echo "Hello world" | cut -f 1 -d ' '\n" \
263 "$ echo "Hello world" | cut -f 2 -d ' '\n" \
266 #ifdef CONFIG_FEATURE_DATE_ISOFMT
267 #define USAGE_DATE_ISOFMT(a) a
269 #define USAGE_DATE_ISOFMT(a)
272 #define date_trivial_usage \
273 "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
274 #define date_full_usage \
275 "Displays the current time in the given FORMAT, or sets the system date.\n" \
277 "\t-R\t\tOutputs RFC-822 compliant date string\n" \
278 "\t-d STRING\tDisplays time described by STRING, not `now'\n" \
279 USAGE_DATE_ISOFMT("\t-I[TIMESPEC]\tOutputs an ISO-8601 compliant date/time string.\n" \
280 "\t\t\tTIMESPEC=`date' (or missing) for date only,\n" \
281 "\t\t\t`hours', `minutes', or `seconds' for date and,\n" \
282 "\t\t\ttime to the indicated precision.\n") \
283 "\t-s\t\tSets time described by STRING\n" \
284 "\t-u\t\tPrints or sets Coordinated Universal Time"
285 #define date_example_usage \
287 "Wed Apr 12 18:52:41 MDT 2000\n"
289 #define dc_trivial_usage \
291 #define dc_full_usage \
292 "This is a Tiny RPN calculator that understands the\n" \
293 "following operations: +, add, -, sub, *, mul, /, div, %, mod, "\
294 "**, exp, and, or, not, eor.\n" \
295 "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \
297 "p - Prints the value on the top of the stack, without altering the stack.\n" \
298 "f - Prints the entire contents of the stack without altering anything.\n" \
299 "o - Pops the value off the top of the stack and uses it to set the output radix.\n" \
300 " Only 10 and 16 are supported."
301 #define dc_example_usage \
304 "$ dc 8 8 * 2 2 + /\n" \
310 "$ echo 72 9 div 8 mul | dc\n" \
313 #define dd_trivial_usage \
314 "[if=FILE] [of=FILE] [bs=N] [count=N] [skip=N]\n" \
315 "\t [seek=N] [conv=notrunc|noerror|sync]"
316 #define dd_full_usage \
317 "Copy a file, converting and formatting according to options\n\n" \
318 "\tif=FILE\t\tread from FILE instead of stdin\n" \
319 "\tof=FILE\t\twrite to FILE instead of stdout\n" \
320 "\tbs=N\t\tread and write N bytes at a time\n" \
321 "\tcount=N\t\tcopy only N input blocks\n" \
322 "\tskip=N\t\tskip N input blocks\n" \
323 "\tseek=N\t\tskip N output blocks\n" \
324 "\tconv=notrunc\tdon't truncate output file\n" \
325 "\tconv=noerror\tcontinue after read errors\n" \
326 "\tconv=sync\tpad blocks with zeros\n" \
328 "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
329 "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)."
330 #define dd_example_usage \
331 "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
335 #define deallocvt_trivial_usage \
337 #define deallocvt_full_usage \
338 "Deallocate unused virtual terminal /dev/ttyN"
340 #define delgroup_trivial_usage \
342 #define delgroup_full_usage \
343 "Deletes group GROUP from the system"
345 #define deluser_trivial_usage \
347 #define deluser_full_usage \
348 "Deletes user USER from the system"
350 #ifdef CONFIG_DEVFSD_FG_NP
351 #define USAGE_DEVFSD_FG_NP(a) a
353 #define USAGE_DEVFSD_FG_NP(a)
356 #define devfsd_trivial_usage \
358 USAGE_DEVFSD_FG_NP("[-fg][-np]" )
359 #define devfsd_full_usage \
360 "Optional daemon for managing devfs permissions and old device name symlinks.\n" \
362 "\tmntpnt\tThe mount point where devfs is mounted.\n\n" \
363 "\t-v\tPrint the protocol version numbers for devfsd\n" \
364 "\t\tand the kernel-side protocol version and exits." \
365 USAGE_DEVFSD_FG_NP( "\n\n\t-fg\tRun the daemon in the foreground.\n\n" \
366 "\t-np\tExit after parsing the configuration file\n" \
367 "\t\tand processing synthetic REGISTER events.\n" \
368 "\t\tDo not poll for events.")
370 #ifdef CONFIG_FEATURE_HUMAN_READABLE
371 #define USAGE_HUMAN_READABLE(a) a
372 #define USAGE_NOT_HUMAN_READABLE(a)
374 #define USAGE_HUMAN_READABLE(a)
375 #define USAGE_NOT_HUMAN_READABLE(a) a
377 #define df_trivial_usage \
378 "[-" USAGE_HUMAN_READABLE("hm") USAGE_NOT_HUMAN_READABLE("") "k] [FILESYSTEM ...]"
379 #define df_full_usage \
380 "Print the filesystem space used and space available.\n\n" \
382 USAGE_HUMAN_READABLE( \
383 "\n\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
384 "\t-m\tprint sizes in megabytes\n" \
385 "\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \
386 "\n\t-k\tprint sizes in kilobytes(compatibility)")
387 #define df_example_usage \
389 "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
390 "/dev/sda3 8690864 8553540 137324 98% /\n" \
391 "/dev/sda1 64216 36364 27852 57% /boot\n" \
393 "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
394 "/dev/sda3 8690864 8553540 137324 98% /\n"
396 #define dirname_trivial_usage \
398 #define dirname_full_usage \
399 "Strips non-directory suffix from FILENAME"
400 #define dirname_example_usage \
401 "$ dirname /tmp/foo\n" \
403 "$ dirname /tmp/foo/\n" \
406 #define dmesg_trivial_usage \
407 "[-c] [-n LEVEL] [-s SIZE]"
408 #define dmesg_full_usage \
409 "Prints or controls the kernel ring buffer\n\n" \
411 "\t-c\t\tClears the ring buffer's contents after printing\n" \
412 "\t-n LEVEL\tSets console logging level\n" \
413 "\t-s SIZE\t\tUse a buffer of size SIZE"
415 #define dos2unix_trivial_usage \
417 #define dos2unix_full_usage \
418 "Converts FILE from dos format to unix format. When no option\n" \
419 "is given, the input is converted to the opposite output format.\n" \
420 "When no file is given, uses stdin for input and stdout for output.\n\n" \
422 "\t-u\toutput will be in UNIX format\n" \
423 "\t-d\toutput will be in DOS format"
425 #define dpkg_trivial_usage \
426 "[-iCPru] package_name"
427 #define dpkg_full_usage \
428 "dpkg is a utility to install, remove and manage Debian packages.\n\n" \
430 "\t-i\tInstall the package\n" \
431 "\t-C\tConfigure an unpackaged package\n" \
432 "\t-P\tPurge all files of a package\n" \
433 "\t-r\tRemove all but the configuration files for a package\n" \
434 "\t-u\tUnpack a package, but dont configure it"
436 #define dpkg_deb_trivial_usage \
437 "[-cefItxX] FILE [argument]"
438 #define dpkg_deb_full_usage \
439 "Perform actions on Debian packages (.debs)\n\n" \
441 "\t-c\tList contents of filesystem tree\n" \
442 "\t-e\tExtract control files to [argument] directory\n" \
443 "\t-f\tDisplay control field name starting with [argument]\n" \
444 "\t-I\tDisplay the control filenamed [argument]\n" \
445 "\t-t\tExtract filesystem tree to stdout in tar format\n" \
446 "\t-x\tExtract packages filesystem tree to directory\n" \
447 "\t-X\tVerbose extract"
448 #define dpkg_deb_example_usage \
449 "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
451 #ifdef CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K
452 #define USAGE_DU_DEFALT_BLOCKSIZE_1k(a) a
453 #define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a)
455 #define USAGE_DU_DEFALT_BLOCKSIZE_1k(a)
456 #define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a) a
459 #define du_trivial_usage \
460 "[-aHLdclsx" USAGE_HUMAN_READABLE("hm") "k] [FILE]..."
461 #define du_full_usage \
462 "Summarizes disk space used for each FILE and/or directory.\n" \
463 "Disk space is printed in units of " \
464 USAGE_DU_DEFALT_BLOCKSIZE_1k("1024") USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k("512") \
467 "\t-a\tshow sizes of files in addition to directories\n" \
468 "\t-H\tfollow symbolic links that are FILE command line args\n" \
469 "\t-L\tfollow all symbolic links encountered\n" \
470 "\t-d N\tlimit output to directories (and files with -a) of depth < N\n" \
471 "\t-c\toutput a grand total\n" \
472 "\t-l\tcount sizes many times if hard linked\n" \
473 "\t-s\tdisplay only a total for each argument\n" \
474 "\t-x\tskip directories on different filesystems\n" \
475 USAGE_HUMAN_READABLE( \
476 "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
477 "\t-m\tprint sizes in megabytes\n" ) \
478 "\t-k\tprint sizes in kilobytes" USAGE_DU_DEFALT_BLOCKSIZE_1k("(default)")
479 #define du_example_usage \
482 "12 ./kernel-patches/CVS\n" \
483 "80 ./kernel-patches\n" \
486 "12 ./scripts/CVS\n" \
492 #define dumpkmap_trivial_usage \
494 #define dumpkmap_full_usage \
495 "Prints out a binary keyboard translation table to standard output."
496 #define dumpkmap_example_usage \
497 "$ dumpkmap > keymap\n"
499 #define dumpleases_trivial_usage \
500 "[-r|-a] [-f LEASEFILE]"
501 #define dumpleases_full_usage \
502 "Displays the DHCP leases granted by udhcpd.\n\n" \
504 "\t-f,\t--file=FILENAME\tLeases file to load\n" \
505 "\t-r,\t--remaining\tInterepret lease times as time remaing\n" \
506 "\t-a,\t--absolute\tInterepret lease times as expire time"
508 #ifdef CONFIG_FEATURE_FANCY_ECHO
509 #define USAGE_FANCY_ECHO(a) a
511 #define USAGE_FANCY_ECHO(a)
514 #define echo_trivial_usage \
515 USAGE_FANCY_ECHO("[-neE] ") "[ARG ...]"
516 #define echo_full_usage \
517 "Prints the specified ARGs to stdout\n\n" \
518 USAGE_FANCY_ECHO("Options:\n" \
519 "\t-n\tsuppress trailing newline\n" \
520 "\t-e\tinterpret backslash-escaped characters (i.e., \\t=tab)\n" \
521 "\t-E\tdisable interpretation of backslash-escaped characters")
522 #define echo_example_usage \
523 "$ echo "Erik is cool"\n" \
525 USAGE_FANCY_ECHO("$ echo -e "Erik\\nis\\ncool"\n" \
529 "$ echo "Erik\\nis\\ncool"\n" \
530 "Erik\\nis\\ncool\n")
532 #define env_trivial_usage \
533 "[-iu] [-] [name=value]... [command]"
534 #define env_full_usage \
535 "Prints the current environment or runs a program after setting\n" \
536 "up the specified environment.\n\n" \
538 "\t-, -i\tstart with an empty environment\n" \
539 "\t-u\tremove variable from the environment"
541 #define expr_trivial_usage \
543 #define expr_full_usage \
544 "Prints the value of EXPRESSION to standard output.\n\n" \
545 "EXPRESSION may be:\n" \
546 "\tARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
547 "\tARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
548 "\tARG1 < ARG2 ARG1 is less than ARG2\n" \
549 "\tARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \
550 "\tARG1 = ARG2 ARG1 is equal to ARG2\n" \
551 "\tARG1 != ARG2 ARG1 is unequal to ARG2\n" \
552 "\tARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \
553 "\tARG1 > ARG2 ARG1 is greater than ARG2\n" \
554 "\tARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" \
555 "\tARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" \
556 "\tARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" \
557 "\tARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" \
558 "\tARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" \
559 "\tSTRING : REGEXP anchored pattern match of REGEXP in STRING\n" \
560 "\tmatch STRING REGEXP same as STRING : REGEXP\n" \
561 "\tsubstr STRING POS LENGTH substring of STRING, POS counted from 1\n" \
562 "\tindex STRING CHARS index in STRING where any CHARS is found,\n" \
564 "\tlength STRING length of STRING\n" \
565 "\tquote TOKEN interpret TOKEN as a string, even if\n" \
566 "\t it is a keyword like `match' or an\n" \
567 "\t operator like `/'\n" \
568 "\t( EXPRESSION ) value of EXPRESSION\n\n" \
569 "Beware that many operators need to be escaped or quoted for shells.\n" \
570 "Comparisons are arithmetic if both ARGs are numbers, else\n" \
571 "lexicographical. Pattern matches return the string matched between \n" \
572 "\\( and \\) or null; if \\( and \\) are not used, they return the number \n" \
573 "of characters matched or 0."
575 #define false_trivial_usage \
577 #define false_full_usage \
578 "Return an exit code of FALSE (1)."
579 #define false_example_usage \
584 #define fbset_trivial_usage \
586 #define fbset_full_usage \
587 "Show and modify frame buffer settings"
588 #define fbset_example_usage \
590 "mode "1024x768-76"\n" \
591 "\t# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
592 "\tgeometry 1024 768 1024 768 16\n" \
593 "\ttimings 12714 128 32 16 4 128 4\n" \
595 "\trgba 5/11,6/5,5/0,0/0\n" \
598 #define fdflush_trivial_usage \
600 #define fdflush_full_usage \
601 "Forces floppy disk drive to detect disk change"
603 #define fdformat_trivial_usage \
605 #define fdformat_full_usage \
606 "Low-level formats a floppy disk\n\n" \
608 "\t-n\tDon't verify after format"
610 #define fdisk_trivial_usage \
611 "[-l] [-v] [-b SSZ] [-u] DISK"
612 #define fdisk_full_usage \
613 "Change partition table\n" \
615 "\t-l List partition table(s)\n" \
616 "\t-u Give Start and End in sector (instead of cylinder) units\n" \
617 "\t-s PARTITION Give partition size(s) in blocks\n" \
618 "\t-b 2048: (for certain MO disks) use 2048-byte sectors\n" \
619 "\t-v Give fdisk version"
621 #ifdef CONFIG_FEATURE_FIND_TYPE
622 #define USAGE_FIND_TYPE(a) a
624 #define USAGE_FIND_TYPE(a)
626 #ifdef CONFIG_FEATURE_FIND_PERM
627 #define USAGE_FIND_PERM(a) a
629 #define USAGE_FIND_PERM(a)
631 #ifdef CONFIG_FEATURE_FIND_MTIME
632 #define USAGE_FIND_MTIME(a) a
634 #define USAGE_FIND_MTIME(a)
636 #ifdef CONFIG_FEATURE_FIND_NEWER
637 #define USAGE_FIND_NEWER(a) a
639 #define USAGE_FIND_NEWER(a)
641 #ifdef CONFIG_FEATURE_FIND_INUM
642 #define USAGE_FIND_INUM(a) a
644 #define USAGE_FIND_INUM(a)
647 #define find_trivial_usage \
648 "[PATH...] [EXPRESSION]"
649 #define find_full_usage \
650 "Search for files in a directory hierarchy. The default PATH is\n" \
651 "the current directory; default EXPRESSION is '-print'\n" \
652 "\nEXPRESSION may consist of:\n" \
653 "\t-follow\t\tDereference symbolic links.\n" \
654 "\t-name PATTERN\tFile name (leading directories removed) matches PATTERN.\n" \
655 "\t-print\t\tPrint (default and assumed).\n" \
657 "\n\t-type X\t\tFiletype matches X (where X is one of: f,d,l,b,c,...)" \
659 "\n\t-perm PERMS\tPermissions match any of (+NNN); all of (-NNN);\n\t\t\tor exactly (NNN)" \
660 ) USAGE_FIND_MTIME( \
661 "\n\t-mtime TIME\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) days" \
662 ) USAGE_FIND_NEWER( \
663 "\n\t-newer FILE\tModified time is more recent than FILE's" \
665 "\n\t-inum N\t\tFile has inode number N")
666 #define find_example_usage \
667 "$ find / -name passwd\n" \
670 #define fold_trivial_usage \
672 #define fold_full_usage \
673 "Wrap input lines in each FILE (standard input by default), writing to\n" \
674 "standard output.\n\n" \
676 "\t-b\tcount bytes rather than columns\n" \
677 "\t-s\tbreak at spaces\n" \
678 "\t-w\tuse WIDTH columns instead of 80"
680 #define free_trivial_usage \
682 #define free_full_usage \
683 "Displays the amount of free and used system memory"
684 #define free_example_usage \
686 " total used free shared buffers\n" \
687 " Mem: 257628 248724 8904 59644 93124\n" \
688 " Swap: 128516 8404 120112\n" \
689 "Total: 386144 257128 129016\n" \
691 #define freeramdisk_trivial_usage \
693 #define freeramdisk_full_usage \
694 "Frees all memory used by the specified ramdisk."
695 #define freeramdisk_example_usage \
696 "$ freeramdisk /dev/ram2\n"
698 #define fsck_minix_trivial_usage \
699 "[-larvsmf] /dev/name"
700 #define fsck_minix_full_usage \
701 "Performs a consistency check for MINIX filesystems.\n\n" \
703 "\t-l\tLists all filenames\n" \
704 "\t-r\tPerform interactive repairs\n" \
705 "\t-a\tPerform automatic repairs\n" \
707 "\t-s\tOutputs super-block information\n" \
708 "\t-m\tActivates MINIX-like \"mode not cleared\" warnings\n" \
709 "\t-f\tForce file system check."
711 #define ftpget_trivial_usage \
712 "[options] remote-host local-file remote-file"
713 #define ftpget_full_usage \
714 "Retrieve a remote file via FTP.\n\n" \
716 "\t-c, --continue Continue a previous transfer\n" \
717 "\t-v, --verbose Verbose\n" \
718 "\t-u, --username Username to be used\n" \
719 "\t-p, --password Password to be used\n" \
720 "\t-P, --port Port number to be used"
722 #define ftpput_trivial_usage \
723 "[options] remote-host remote-file local-file"
724 #define ftpput_full_usage \
725 "Store a local file on a remote machine via FTP.\n\n" \
727 "\t-v, --verbose Verbose\n" \
728 "\t-u, --username Username to be used\n" \
729 "\t-p, --password Password to be used\n" \
730 "\t-P, --port Port number to be used"
732 #define getopt_trivial_usage \
734 #define getopt_full_usage \
735 "Parse command options\n" \
736 "\t-a, --alternative Allow long options starting with single -\n" \
737 "\t-l, --longoptions=longopts Long options to be recognized\n" \
738 "\t-n, --name=progname The name under which errors are reported\n" \
739 "\t-o, --options=optstring Short options to be recognized\n" \
740 "\t-q, --quiet Disable error reporting by getopt(3)\n" \
741 "\t-Q, --quiet-output No normal output\n" \
742 "\t-s, --shell=shell Set shell quoting conventions\n" \
743 "\t-T, --test Test for getopt(1) version\n" \
744 "\t-u, --unqote Do not quote the output"
745 #define getopt_example_usage \
746 "$ cat getopt.test\n" \
748 "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
749 " -n 'example.busybox' -- "$@"`\n" \
750 "if [ $? != 0 ] ; then exit 1 ; fi\n" \
751 "eval set -- "$GETOPT"\n" \
752 "while true ; do\n" \
754 " -a|--a-long) echo \"Option a\" ; shift ;;\n" \
755 " -b|--b-long) echo \"Option b, argument `$2'\" ; shift 2 ;;\n" \
758 " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \
759 " *) echo \"Option c, argument `$2'\" ; shift 2 ;;\n" \
761 " --) shift ; break ;;\n" \
762 " *) echo \"Internal error!\" ; exit 1 ;;\n" \
766 #define getty_trivial_usage \
767 "[OPTIONS]... baud_rate,... line [termtype]"
768 #define getty_full_usage \
769 "Opens a tty, prompts for a login name, then invokes /bin/login\n\n" \
771 "\t-h\t\tEnable hardware (RTS/CTS) flow control.\n" \
772 "\t-i\t\tDo not display /etc/issue before running login.\n" \
773 "\t-L\t\tLocal line, so do not do carrier detect.\n" \
774 "\t-m\t\tGet baud rate from modem's CONNECT status message.\n" \
775 "\t-w\t\tWait for a CR or LF before sending /etc/issue.\n" \
776 "\t-n\t\tDo not prompt the user for a login name.\n" \
777 "\t-f issue_file\tDisplay issue_file instead of /etc/issue.\n" \
778 "\t-l login_app\tInvoke login_app instead of /bin/login.\n" \
779 "\t-t timeout\tTerminate after timeout if no username is read.\n" \
780 "\t-I initstring\tSets the init string to send before anything else.\n" \
781 "\t-H login_host\tLog login_host into the utmp file as the hostname."
784 #define grep_trivial_usage \
785 "[-ihHnqvs] PATTERN [FILEs...]"
786 #define grep_full_usage \
787 "Search for PATTERN in each FILE or standard input.\n\n" \
789 "\t-H\tprefix output lines with filename where match was found\n" \
790 "\t-h\tsuppress the prefixing filename on output\n" \
791 "\t-i\tignore case distinctions\n" \
792 "\t-l\tlist names of files that match\n" \
793 "\t-n\tprint line number with output lines\n" \
794 "\t-q\tbe quiet. Returns 0 if result was found, 1 otherwise\n" \
795 "\t-v\tselect non-matching lines\n" \
796 "\t-s\tsuppress file open/read error messages"
797 #define grep_example_usage \
798 "$ grep root /etc/passwd\n" \
799 "root:x:0:0:root:/root:/bin/bash\n" \
800 "$ grep ^[rR]oo. /etc/passwd\n" \
801 "root:x:0:0:root:/root:/bin/bash\n"
803 #define gunzip_trivial_usage \
805 #define gunzip_full_usage \
806 "Uncompress FILE (or standard input if FILE is '-').\n\n" \
808 "\t-c\tWrite output to standard output\n" \
809 "\t-t\tTest compressed file integrity"
810 #define gunzip_example_usage \
811 "$ ls -la /tmp/BusyBox*\n" \
812 "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
813 "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
814 "$ ls -la /tmp/BusyBox*\n" \
815 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
817 #define gzip_trivial_usage \
818 "[OPTION]... [FILE]..."
819 #define gzip_full_usage \
820 "Compress FILE(s) with maximum compression.\n" \
821 "When FILE is '-' or unspecified, reads standard input. Implies -c.\n\n" \
823 "\t-c\tWrite output to standard output instead of FILE.gz\n" \
825 #define gzip_example_usage \
826 "$ ls -la /tmp/busybox*\n" \
827 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
828 "$ gzip /tmp/busybox.tar\n" \
829 "$ ls -la /tmp/busybox*\n" \
830 "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
832 #define halt_trivial_usage \
834 #define halt_full_usage \
837 #ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY
838 #define USAGE_HDPARM_IDENT(a) a
840 #define USAGE_HDPARM_IDENT(a)
843 #ifdef CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
844 #define USAGE_SCAN_HWIF(a) a
846 #define USAGE_SCAN_HWIF(a)
849 #ifdef CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
850 #define USAGE_UNREGISTER_HWIF(a) a
852 #define USAGE_UNREGISTER_HWIF(a)
855 #ifdef CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
856 #define USAGE_DRIVE_RESET(a) a
858 #define USAGE_DRIVE_RESET(a)
861 #ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
862 #define USAGE_TRISTATE_HWIF(a) a
864 #define USAGE_TRISTATE_HWIF(a)
867 #ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
868 #define USAGE_GETSET_DMA(a) a
870 #define USAGE_GETSET_DMA(a)
873 #define hdparm_trivial_usage \
874 "[options] [device] .."
875 #define hdparm_full_usage \
877 "\t-a get/set fs readahead\n" \
878 "\t-A set drive read-lookahead flag (0/1)\n" \
879 "\t-b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
880 "\t-B set Advanced Power Management setting (1-255)\n" \
881 "\t-c get/set IDE 32-bit IO setting\n" \
882 "\t-C check IDE power mode status\n" \
883 USAGE_GETSET_DMA("\t-d get/set using_dma flag\n") \
884 "\t-D enable/disable drive defect-mgmt\n" \
885 "\t-f flush buffer cache for device on exit\n" \
886 "\t-g display drive geometry\n" \
887 "\t-h display terse usage information\n" \
888 "\t-i display drive identification\n" \
889 USAGE_HDPARM_IDENT("\t-I detailed/current information directly from drive\n") \
890 USAGE_HDPARM_IDENT("\t-Istdin similar to -I, but wants /proc/ide/" "*" "/hd?/identify as input\n") \
891 "\t-k get/set keep_settings_over_reset flag (0/1)\n" \
892 "\t-K set drive keep_features_over_reset flag (0/1)\n" \
893 "\t-L set drive doorlock (0/1) (removable harddisks only)\n" \
894 "\t-m get/set multiple sector count\n" \
895 "\t-n get/set ignore-write-errors flag (0/1)\n" \
896 "\t-p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
897 "\t-P set drive prefetch count\n" \
898 "\t-q change next setting quietly\n" \
899 "\t-Q get/set DMA tagged-queuing depth (if supported)\n" \
900 "\t-r get/set readonly flag (DANGEROUS to set)\n" \
901 USAGE_SCAN_HWIF("\t-R register an IDE interface (DANGEROUS)\n") \
902 "\t-S set standby (spindown) timeout\n" \
903 "\t-t perform device read timings\n" \
904 "\t-T perform cache read timings\n" \
905 "\t-u get/set unmaskirq flag (0/1)\n" \
906 USAGE_UNREGISTER_HWIF("\t-U un-register an IDE interface (DANGEROUS)\n") \
907 "\t-v defaults; same as -mcudkrag for IDE drives\n" \
908 "\t-V display program version and exit immediately\n" \
909 USAGE_DRIVE_RESET("\t-w perform device reset (DANGEROUS)\n") \
910 "\t-W set drive write-caching flag (0/1) (DANGEROUS)\n" \
911 USAGE_TRISTATE_HWIF("\t-x tristate device for hotswap (0/1) (DANGEROUS)\n") \
912 "\t-X set IDE xfer mode (DANGEROUS)\n" \
913 "\t-y put IDE drive in standby mode\n" \
914 "\t-Y put IDE drive to sleep\n" \
915 "\t-Z disable Seagate auto-powersaving mode\n" \
916 "\t-z re-read partition table"
918 #ifdef CONFIG_FEATURE_FANCY_HEAD
919 #define USAGE_FANCY_HEAD(a) a
921 #define USAGE_FANCY_HEAD(a)
924 #define head_trivial_usage \
925 "[OPTION]... [FILE]..."
926 #define head_full_usage \
927 "Print first 10 lines of each FILE to standard output.\n" \
928 "With more than one FILE, precede each with a header giving the\n" \
929 "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
931 "\t-n NUM\t\tPrint first NUM lines instead of first 10" \
933 "\n\t-c NUM\t\toutput the first NUM bytes\n" \
934 "\t-q\t\tnever output headers giving file names\n" \
935 "\t-v\t\talways output headers giving file names" )
936 #define head_example_usage \
937 "$ head -n 2 /etc/passwd\n" \
938 "root:x:0:0:root:/root:/bin/bash\n" \
939 "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
941 #define hexdump_trivial_usage \
942 "[-[bcdefnosvx]] [OPTION] FILE"
943 #define hexdump_full_usage \
944 "The hexdump utility is a filter which displays the specified files,\n" \
945 "or the standard input, if no files are specified, in a user specified\n"\
947 "\t-b\t\tOne-byte octal display\n" \
948 "\t-c\t\tOne-byte character display\n" \
949 "\t-d\t\tTwo-byte decimal display\n" \
950 "\t-e FORMAT STRING\n" \
951 "\t-f FORMAT FILE\n" \
952 "\t-n LENGTH\tInterpret only length bytes of input\n" \
953 "\t-o\t\tTwo-byte octal display\n" \
954 "\t-s OFFSET\tSkip offset byte\n" \
955 "\t-v\t\tdisplay all input data\n" \
956 "\t-x\t\tTwo-byte hexadecimal display"
958 #define hostid_trivial_usage \
960 #define hostid_full_usage \
961 "Print out a unique 32-bit identifier for the machine."
963 #define hostname_trivial_usage \
964 "[OPTION] {hostname | -F FILE}"
965 #define hostname_full_usage \
966 "Get or set the hostname or DNS domain name. If a hostname is given\n" \
967 "(or FILE with the -F parameter), the host name will be set.\n\n" \
970 "\t-i\tAddresses for the hostname\n" \
971 "\t-d\tDNS domain name\n" \
972 "\t-f\tFully qualified domain name\n" \
973 "\t-F FILE\tUse the contents of FILE to specify the hostname"
974 #define hostname_example_usage \
978 #ifdef CONFIG_FEATURE_HTTPD_BASIC_AUTH
979 #define USAGE_HTTPD_BASIC_AUTH(a) a
980 #ifdef CONFIG_FEATURE_HTTPD_AUTH_MD5
981 #define USAGE_HTTPD_AUTH_MD5(a) a
983 #define USAGE_HTTPD_AUTH_MD5(a)
986 #define USAGE_HTTPD_BASIC_AUTH(a)
987 #define USAGE_HTTPD_AUTH_MD5(a)
989 #ifdef CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
990 #define USAGE_HTTPD_STANDALONE(a)
991 #define USAGE_HTTPD_SETUID(a)
993 #define USAGE_HTTPD_STANDALONE(a) a
994 #ifdef CONFIG_FEATURE_HTTPD_SETUID
995 #define USAGE_HTTPD_SETUID(a) a
997 #define USAGE_HTTPD_SETUID(a)
1000 #define httpd_trivial_usage \
1001 "[-c <conf file>]" \
1002 USAGE_HTTPD_STANDALONE(" [-p <port>]") \
1003 USAGE_HTTPD_SETUID(" [-u user]") \
1004 USAGE_HTTPD_BASIC_AUTH(" [-r <realm>]") \
1005 USAGE_HTTPD_AUTH_MD5(" [-m pass]") \
1007 #define httpd_full_usage \
1008 "Listens for incoming http server requests.\n\n"\
1010 "\t-c FILE\t\tSpecifies configuration file. (default httpd.conf)\n" \
1011 USAGE_HTTPD_STANDALONE("\t-p PORT\tServer port (default 80)\n") \
1012 USAGE_HTTPD_SETUID("\t-u USER\tSet uid to USER after listening privilegies port\n") \
1013 USAGE_HTTPD_BASIC_AUTH("\t-r REALM\tAuthentication Realm for Basic Authentication\n") \
1014 USAGE_HTTPD_AUTH_MD5("\t-m PASS\t\tCrypt PASS with md5 algorithm\n") \
1015 "\t-e STRING\tHtml encode STRING\n" \
1016 "\t-d STRING\tURL decode STRING"
1018 #define hwclock_trivial_usage \
1019 "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
1020 #define hwclock_full_usage \
1021 "Query and set the hardware clock (RTC)\n\n" \
1023 "\t-r\tread hardware clock and print result\n" \
1024 "\t-s\tset the system time from the hardware clock\n" \
1025 "\t-w\tset the hardware clock to the current system time\n" \
1026 "\t-u\tthe hardware clock is kept in coordinated universal time\n" \
1027 "\t-l\tthe hardware clock is kept in local time"
1029 #ifdef CONFIG_SELINUX
1030 #define USAGE_SELINUX(a) a
1032 #define USAGE_SELINUX(a)
1035 #define id_trivial_usage \
1036 "[OPTIONS]... [USERNAME]"
1037 #define id_full_usage \
1038 "Print information for USERNAME or the current user\n\n" \
1040 USAGE_SELINUX("\t-c\tprints only the security context\n") \
1041 "\t-g\tprints only the group ID\n" \
1042 "\t-u\tprints only the user ID\n" \
1043 "\t-n\tprint a name instead of a number\n" \
1044 "\t-r\tprints the real user ID instead of the effective ID"
1045 #define id_example_usage \
1047 "uid=1000(andersen) gid=1000(andersen)\n"
1049 #ifdef CONFIG_FEATURE_IFCONFIG_SLIP
1050 #define USAGE_SIOCSKEEPALIVE(a) a
1052 #define USAGE_SIOCSKEEPALIVE(a)
1054 #ifdef CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
1055 #define USAGE_IFCONFIG_MII(a) a
1057 #define USAGE_IFCONFIG_MII(a)
1059 #ifdef CONFIG_FEATURE_IFCONFIG_HW
1060 #define USAGE_IFCONFIG_HW(a) a
1062 #define USAGE_IFCONFIG_HW(a)
1064 #ifdef CONFIG_FEATURE_IFCONFIG_STATUS
1065 #define USAGE_IFCONFIG_OPT_A(a) a
1067 #define USAGE_IFCONFIG_OPT_A(a)
1069 #ifdef CONFIG_FEATURE_IPV6
1070 #define USAGE_IPV6(a) a
1072 #define USAGE_IPV6(a)
1075 #define ifconfig_trivial_usage \
1076 USAGE_IFCONFIG_OPT_A("[-a]") " <interface> [<address>]"
1077 #define ifconfig_full_usage \
1078 "configure a network interface\n\n" \
1080 USAGE_IPV6("[add <address>[/<prefixlen>]]\n") \
1081 USAGE_IPV6("[del <address>[/<prefixlen>]]\n") \
1082 "\t[[-]broadcast [<address>]] [[-]pointopoint [<address>]]\n" \
1083 "\t[netmask <address>] [dstaddr <address>]\n" \
1084 USAGE_SIOCSKEEPALIVE("\t[outfill <NN>] [keepalive <NN>]\n") \
1085 "\t" USAGE_IFCONFIG_HW("[hw ether <address>] ") \
1086 "[metric <NN>] [mtu <NN>]\n" \
1087 "\t[[-]trailers] [[-]arp] [[-]allmulti]\n" \
1088 "\t[multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]\n" \
1089 USAGE_IFCONFIG_MII("\t[mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \
1092 #define ifup_trivial_usage \
1093 "<-ahinv> <ifaces...>"
1094 #define ifup_full_usage \
1095 "ifup <options> <ifaces...>\n\n" \
1097 "\t-h\tthis help\n" \
1098 "\t-a\tde/configure all interfaces automatically\n" \
1099 "\t-i FILE\tuse FILE for interface definitions\n" \
1100 "\t-n\tprint out what would happen, but don't do it\n" \
1101 "\t\t\t(note that this option doesn't disable mappings)\n" \
1102 "\t-v\tprint out what would happen before doing it\n" \
1103 "\t-m\tdon't run any mappings\n" \
1104 "\t-f\tforce de/configuration"
1106 #define ifdown_trivial_usage \
1107 "<-ahinv> <ifaces...>"
1108 #define ifdown_full_usage \
1109 "ifdown <options> <ifaces...>\n\n" \
1111 "\t-h\tthis help\n" \
1112 "\t-a\tde/configure all interfaces automatically\n" \
1113 "\t-i FILE\tuse FILE for interface definitions\n" \
1114 "\t-n\tprint out what would happen, but don't do it\n" \
1115 "\t\t(note that this option doesn't disable mappings)\n" \
1116 "\t-v\tprint out what would happen before doing it\n" \
1117 "\t-m\tdon't run any mappings\n" \
1118 "\t-f\tforce de/configuration"
1120 #define inetd_trivial_usage \
1122 #define inetd_full_usage \
1123 "Listens for network connections and launches programs\n\n" \
1125 "\t-q\tSets the size of the socket listen queue to\n" \
1126 "\t\tthe specified value. Default is 128."
1128 #define init_trivial_usage \
1130 #define init_full_usage \
1131 "Init is the parent of all processes."
1132 #define init_notes_usage \
1133 "This version of init is designed to be run only by the kernel.\n" \
1135 "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
1136 "the /etc/inittab file is completely ignored by BusyBox init. If you want \n" \
1137 "runlevels, use sysvinit.\n" \
1139 "BusyBox init works just fine without an inittab. If no inittab is found, \n" \
1140 "it has the following default behavior:\n" \
1142 " ::sysinit:/etc/init.d/rcS\n" \
1143 " ::askfirst:/bin/sh\n" \
1144 " ::ctrlaltdel:/sbin/reboot\n" \
1145 " ::shutdown:/sbin/swapoff -a\n" \
1146 " ::shutdown:/bin/umount -a -r\n" \
1147 " ::restart:/sbin/init\n" \
1149 "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
1151 " tty2::askfirst:/bin/sh\n" \
1152 " tty3::askfirst:/bin/sh\n" \
1153 " tty4::askfirst:/bin/sh\n" \
1155 "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
1157 " <id>:<runlevels>:<action>:<process>\n" \
1161 " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
1162 " The id field is used by BusyBox init to specify the controlling tty for\n" \
1163 " the specified process to run on. The contents of this field are\n" \
1164 " appended to "/dev/" and used as-is. There is no need for this field to\n" \
1165 " be unique, although if it isn't you may have strange results. If this\n" \
1166 " field is left blank, the controlling tty is set to the console. Also\n" \
1167 " note that if BusyBox detects that a serial console is in use, then only\n" \
1168 " entries whose controlling tty is either the serial console or /dev/null\n" \
1169 " will be run. BusyBox init does nothing with utmp. We don't need no\n" \
1170 " stinkin' utmp.\n" \
1174 " The runlevels field is completely ignored.\n" \
1178 " Valid actions include: sysinit, respawn, askfirst, wait,\n" \
1179 " once, restart, ctrlaltdel, and shutdown.\n" \
1181 " The available actions can be classified into two groups: actions\n" \
1182 " that are run only once, and actions that are re-run when the specified\n" \
1183 " process exits.\n" \
1185 " Run only-once actions:\n" \
1187 " 'sysinit' is the first item run on boot. init waits until all\n" \
1188 " sysinit actions are completed before continuing. Following the\n" \
1189 " completion of all sysinit actions, all 'wait' actions are run.\n" \
1190 " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
1191 " the specified task completes. 'once' actions are asynchronous,\n" \
1192 " therefore, init does not wait for them to complete. 'restart' is\n" \
1193 " the action taken to restart the init process. By default this should\n" \
1194 " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
1195 " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
1196 " actions are run when the system detects that someone on the system\n" \
1197 " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
1198 " wants to run 'reboot' at this point to cause the system to reboot.\n" \
1199 " Finally the 'shutdown' action specifies the actions to taken when\n" \
1200 " init is told to reboot. Unmounting filesystems and disabling swap\n" \
1201 " is a very good here\n" \
1203 " Run repeatedly actions:\n" \
1205 " 'respawn' actions are run after the 'once' actions. When a process\n" \
1206 " started with a 'respawn' action exits, init automatically restarts\n" \
1207 " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
1208 " respawning out of control. The 'askfirst' actions acts just like\n" \
1209 " respawn, except that before running the specified process it\n" \
1210 " displays the line "Please press Enter to activate this console."\n" \
1211 " and then waits for the user to press enter before starting the\n" \
1212 " specified process.\n" \
1214 " Unrecognized actions (like initdefault) will cause init to emit an\n" \
1215 " error message, and then go along with its business. All actions are\n" \
1216 " run in the order they appear in /etc/inittab.\n" \
1220 " Specifies the process to be executed and it's command line.\n" \
1222 "Example /etc/inittab file:\n" \
1224 " # This is run first except when booting in single-user mode.\n" \
1226 " ::sysinit:/etc/init.d/rcS\n" \
1228 " # /bin/sh invocations on selected ttys\n" \
1230 " # Start an "askfirst" shell on the console (whatever that may be)\n" \
1231 " ::askfirst:-/bin/sh\n" \
1232 " # Start an "askfirst" shell on /dev/tty2-4\n" \
1233 " tty2::askfirst:-/bin/sh\n" \
1234 " tty3::askfirst:-/bin/sh\n" \
1235 " tty4::askfirst:-/bin/sh\n" \
1237 " # /sbin/getty invocations for selected ttys\n" \
1239 " tty4::respawn:/sbin/getty 38400 tty4\n" \
1240 " tty5::respawn:/sbin/getty 38400 tty5\n" \
1243 " # Example of how to put a getty on a serial line (for a terminal)\n" \
1245 " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
1246 " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
1248 " # Example how to put a getty on a modem line.\n" \
1249 " #::respawn:/sbin/getty 57600 ttyS2\n" \
1251 " # Stuff to do when restarting the init process\n" \
1252 " ::restart:/sbin/init\n" \
1254 " # Stuff to do before rebooting\n" \
1255 " ::ctrlaltdel:/sbin/reboot\n" \
1256 " ::shutdown:/bin/umount -a -r\n" \
1257 " ::shutdown:/sbin/swapoff -a\n"
1259 #ifdef CONFIG_FEATURE_INSMOD_LOAD_MAP
1260 #define USAGE_INSMOD_MAP(a) a
1262 #define USAGE_INSMOD_MAP(a)
1264 #define insmod_trivial_usage \
1265 "[OPTION]... MODULE [symbol=value]..."
1266 #define insmod_full_usage \
1267 "Loads the specified kernel modules into the kernel.\n\n" \
1269 "\t-f\tForce module to load into the wrong kernel version.\n" \
1270 "\t-k\tMake module autoclean-able.\n" \
1271 "\t-v\tverbose output\n" \
1272 "\t-L\tLock to prevent simultaneous loads of a module\n" \
1273 USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout\n") \
1274 "\t-o NAME\tSet internal module name to NAME\n" \
1275 "\t-x\tdo not export externs"
1277 #define install_trivial_usage \
1278 "[-cgmops] [sources] <dest|directory>"
1279 #define install_full_usage \
1280 "Copies files and set attributes\n\n" \
1282 "\t-c\tcopy the file, default\n" \
1283 "\t-g\tset group ownership\n" \
1284 "\t-m\tset permission modes\n" \
1285 "\t-o\tset ownership\n" \
1286 "\t-p\tpreserve date\n" \
1287 "\t-s\tstrip symbol tables"
1289 #define ip_trivial_usage \
1290 "[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }"
1291 #define ip_full_usage \
1292 "ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \
1293 "where OBJECT := { link | addr | route | tunnel }\n" \
1294 "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }"
1296 #define ipaddr_trivial_usage \
1297 "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
1298 "\t\t[ dev STRING ] [ to PREFIX ] }"
1299 #define ipaddr_full_usage \
1300 "ipaddr {add|del} IFADDR dev STRING\n" \
1301 "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
1302 "\t\t\t[ to PREFIX ] [ label PATTERN ]\n" \
1303 "\t\t\tIFADDR := PREFIX | ADDR peer PREFIX\n" \
1304 "\t\t\t[ broadcast ADDR ] [ anycast ADDR ]\n" \
1305 "\t\t\t[ label STRING ] [ scope SCOPE-ID ]\n" \
1306 "\t\t\tSCOPE-ID := [ host | link | global | NUMBER ]"
1308 #ifdef CONFIG_FEATURE_IPCALC_FANCY
1309 #define XUSAGE_IPCALC_FANCY(a) a
1311 #define XUSAGE_IPCALC_FANCY(a)
1313 #define ipcalc_trivial_usage \
1314 "[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
1315 #define ipcalc_full_usage \
1316 "Calculate IP network settings from a IP address\n\n" \
1318 "\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \
1319 "\t-n\t--network\tDisplay calculated network address.\n" \
1320 "\t-m\t--netmask\tDisplay default netmask for IP." \
1321 XUSAGE_IPCALC_FANCY(\
1322 "\n\t-p\t--prefix\tDisplay the prefix for IP/NETMASK." \
1323 "\t-h\t--hostname\tDisplay first resolved host name.\n" \
1324 "\t-s\t--silent\tDon't ever display error messages.")
1326 #define iplink_trivial_usage \
1327 "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
1328 #define iplink_full_usage \
1329 "iplink set DEVICE { up | down | arp { on | off } |\n" \
1330 "\t\t\tdynamic { on | off } |\n" \
1331 "\t\t\tmtu MTU }\n" \
1332 "\tiplink show [ DEVICE ]"
1334 #define iproute_trivial_usage \
1335 "{ list | flush | { add | del | change | append |\n" \
1336 "\t\treplace | monitor } ROUTE }"
1337 #define iproute_full_usage \
1338 "iproute { list | flush } SELECTOR\n" \
1339 "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
1340 "\t\t\t[ oif STRING ] [ tos TOS ]\n" \
1341 "\tiproute { add | del | change | append | replace | monitor } ROUTE\n" \
1342 "\t\t\tSELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
1343 "\t\t\tROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]"
1345 #define iptunnel_trivial_usage \
1346 "{ add | change | del | show } [ NAME ]\n" \
1347 "\t\t[ mode { ipip | gre | sit } ]\n" \
1348 "\t\t[ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
1349 #define iptunnel_full_usage \
1350 "iptunnel { add | change | del | show } [ NAME ]\n" \
1351 "\t\t\t[ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
1352 "\t\t\t[ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
1353 "\t\t\t[ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]"
1355 #define kill_trivial_usage \
1356 "[-signal] process-id [process-id ...]"
1357 #define kill_full_usage \
1358 "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
1360 "\t-l\tList all signal names and numbers."
1361 #define kill_example_usage \
1362 "$ ps | grep apache\n" \
1363 "252 root root S [apache]\n" \
1364 "263 www-data www-data S [apache]\n" \
1365 "264 www-data www-data S [apache]\n" \
1366 "265 www-data www-data S [apache]\n" \
1367 "266 www-data www-data S [apache]\n" \
1368 "267 www-data www-data S [apache]\n" \
1371 #define killall_trivial_usage \
1372 "[-signal] process-name [process-name ...]"
1373 #define killall_full_usage \
1374 "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
1376 "\t-l\tList all signal names and numbers."
1377 #define killall_example_usage \
1378 "$ killall apache\n"
1380 #define klogd_trivial_usage \
1382 #define klogd_full_usage \
1385 "\t-c n\tSets the default log level of console messages to n.\n"\
1386 "\t-n\tRun as a foreground process."
1388 #define length_trivial_usage \
1390 #define length_full_usage \
1391 "Prints out the length of the specified STRING."
1392 #define length_example_usage \
1393 "$ length Hello\n" \
1396 #define ln_trivial_usage \
1397 "[OPTION] TARGET... LINK_NAME|DIRECTORY"
1398 #define ln_full_usage \
1399 "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n"\
1400 "\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \
1402 "\t-s\tmake symbolic links instead of hard links\n" \
1403 "\t-f\tremove existing destination files\n" \
1404 "\t-n\tno dereference symlinks - treat like normal file"
1405 #define ln_example_usage \
1406 "$ ln -s BusyBox /tmp/ls\n" \
1407 "$ ls -l /tmp/ls\n" \
1408 "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
1410 #define loadfont_trivial_usage \
1412 #define loadfont_full_usage \
1413 "Loads a console font from standard input."
1414 #define loadfont_example_usage \
1415 "$ loadfont < /etc/i18n/fontname\n"
1417 #define loadkmap_trivial_usage \
1419 #define loadkmap_full_usage \
1420 "Loads a binary keyboard translation table from standard input."
1421 #define loadkmap_example_usage \
1422 "$ loadkmap < /etc/i18n/lang-keymap\n"
1424 #define logger_trivial_usage \
1425 "[OPTION]... [MESSAGE]"
1426 #define logger_full_usage \
1427 "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \
1429 "\t-s\tLog to stderr as well as the system log.\n" \
1430 "\t-t TAG\tLog using the specified tag (defaults to user name).\n" \
1431 "\t-p PRIORITY\tEnter the message with the specified priority.\n" \
1432 "\t\tThis may be numerical or a ``facility.level'' pair."
1433 #define logger_example_usage \
1434 "$ logger "hello"\n"
1436 #define login_trivial_usage \
1437 "[OPTION]... [username] [ENV=VAR ...]"
1438 #define login_full_usage \
1439 "Begin a new session on the system\n\n" \
1441 "\t-f\tDo not authenticate (user already authenticated)\n" \
1442 "\t-h\tName of the remote host for this login.\n" \
1443 "\t-p\tPreserve environment."
1445 #define logname_trivial_usage \
1447 #define logname_full_usage \
1448 "Print the name of the current user."
1449 #define logname_example_usage \
1453 #define logread_trivial_usage \
1455 #define logread_full_usage \
1456 "Shows the messages from syslogd (using circular buffer).\n\n" \
1458 "\t-f\t\toutput data as the log grows"
1460 #define losetup_trivial_usage \
1461 "[OPTION]... LOOPDEVICE FILE\n" \
1462 "or: losetup [OPTION]... -d LOOPDEVICE"
1463 #define losetup_full_usage \
1464 "Associate LOOPDEVICE with FILE.\n\n" \
1466 "\t-d\t\tDisassociate LOOPDEVICE.\n" \
1467 "\t-o OFFSET\tStart OFFSET bytes into FILE."
1469 #ifdef CONFIG_FEATURE_LS_TIMESTAMPS
1470 #define USAGE_LS_TIMESTAMPS(a) a
1472 #define USAGE_LS_TIMESTAMPS(a)
1474 #ifdef CONFIG_FEATURE_LS_FILETYPES
1475 #define USAGE_LS_FILETYPES(a) a
1477 #define USAGE_LS_FILETYPES(a)
1479 #ifdef CONFIG_FEATURE_LS_FOLLOWLINKS
1480 #define USAGE_LS_FOLLOWLINKS(a) a
1482 #define USAGE_LS_FOLLOWLINKS(a)
1484 #ifdef CONFIG_FEATURE_LS_RECURSIVE
1485 #define USAGE_LS_RECURSIVE(a) a
1487 #define USAGE_LS_RECURSIVE(a)
1489 #ifdef CONFIG_FEATURE_LS_SORTFILES
1490 #define USAGE_LS_SORTFILES(a) a
1492 #define USAGE_LS_SORTFILES(a)
1494 #ifdef CONFIG_FEATURE_AUTOWIDTH
1495 #define USAGE_AUTOWIDTH(a) a
1497 #define USAGE_AUTOWIDTH(a)
1500 #define ls_trivial_usage \
1501 "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USAGE_HUMAN_READABLE("h") USAGE_NOT_HUMAN_READABLE("") "k" USAGE_SELINUX("K") "] [filenames...]"
1502 #define ls_full_usage \
1503 "List directory contents\n\n" \
1505 "\t-1\tlist files in a single column\n" \
1506 "\t-A\tdo not list implied . and ..\n" \
1507 "\t-a\tdo not hide entries starting with .\n" \
1508 "\t-C\tlist entries by columns\n" \
1509 USAGE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \
1510 "\t-d\tlist directory entries instead of contents\n" \
1511 USAGE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \
1512 USAGE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \
1513 "\t-i\tlist the i-node for each file\n" \
1514 "\t-l\tuse a long listing format\n" \
1515 "\t-n\tlist numeric UIDs and GIDs instead of names\n" \
1516 USAGE_LS_FILETYPES("\t-p\tappend indicator (one of /=@|) to entries\n") \
1517 USAGE_LS_FOLLOWLINKS("\t-L\tlist entries pointed to by symbolic links\n") \
1518 USAGE_LS_RECURSIVE("\t-R\tlist subdirectories recursively\n") \
1519 USAGE_LS_SORTFILES("\t-r\tsort the listing in reverse order\n") \
1520 USAGE_LS_SORTFILES("\t-S\tsort the listing by file size\n") \
1521 "\t-s\tlist the size of each file, in blocks\n" \
1522 USAGE_AUTOWIDTH("\t-T NUM\tassume Tabstop every NUM columns\n") \
1523 USAGE_LS_TIMESTAMPS("\t-t\twith -l: show modification time\n") \
1524 USAGE_LS_TIMESTAMPS("\t-u\twith -l: show access time\n") \
1525 USAGE_LS_SORTFILES("\t-v\tsort the listing by version\n") \
1526 USAGE_AUTOWIDTH("\t-w NUM\tassume the terminal is NUM columns wide\n") \
1527 "\t-x\tlist entries by lines instead of by columns\n" \
1528 USAGE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \
1529 USAGE_HUMAN_READABLE( \
1530 "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n") \
1531 USAGE_SELINUX("\t-k\tprint security context\n") \
1532 USAGE_SELINUX("\t-K\tprint security context in long format\n")
1534 #define lsmod_trivial_usage \
1536 #define lsmod_full_usage \
1537 "List the currently loaded kernel modules."
1539 #define makedevs_trivial_usage \
1540 "NAME TYPE MAJOR MINOR FIRST LAST [s]"
1541 #define makedevs_full_usage \
1542 "Creates a range of block or character special files\n\n" \
1543 "TYPEs include:\n" \
1544 "\tb:\tMake a block (buffered) device.\n" \
1545 "\tc or u:\tMake a character (un-buffered) device.\n" \
1546 "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes.\n\n" \
1547 "FIRST specifies the number appended to NAME to create the first device.\n" \
1548 "LAST specifies the number of the last item that should be created.\n" \
1549 "If 's' is the last argument, the base device is created as well.\n\n" \
1551 "\tmakedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \
1552 "\tmakedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
1553 #define makedevs_example_usage \
1554 "# makedevs /dev/ttyS c 4 66 2 63\n" \
1555 "[creates ttyS2-ttyS63]\n" \
1556 "# makedevs /dev/hda b 3 0 0 8 s\n" \
1557 "[creates hda,hda1-hda8]\n"
1559 #ifdef CONFIG_FEATURE_MD5_SHA1_SUM_CHECK
1560 #define USAGE_MD5_SHA1_SUM_CHECK(a) a
1562 #define USAGE_MD5_SHA1_SUM_CHECK(a)
1565 #define md5sum_trivial_usage \
1566 "[OPTION] [FILEs...]" \
1567 USAGE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
1568 #define md5sum_full_usage \
1569 "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums.\n\n" \
1571 "With no FILE, or when FILE is -, read standard input." \
1572 USAGE_MD5_SHA1_SUM_CHECK("\n\n" \
1573 "\t-c\tcheck MD5 sums against given list\n" \
1574 "\nThe following two options are useful only when verifying checksums:\n" \
1575 "\t-s\tdon't output anything, status code shows success\n" \
1576 "\t-w\twarn about improperly formated MD5 checksum lines")
1577 #define md5sum_example_usage \
1578 "$ md5sum < busybox\n" \
1579 "6fd11e98b98a58f64ff3398d7b324003\n" \
1580 "$ md5sum busybox\n" \
1581 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
1583 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
1587 #define mesg_trivial_usage \
1589 #define mesg_full_usage \
1590 "mesg controls write access to your terminal\n" \
1591 "\ty\tAllow write access to your terminal.\n" \
1592 "\tn\tDisallow write access to your terminal.\n"
1594 #define minit_trivial_usage \
1596 #define minit_full_usage \
1597 "A small replacement for SysV init"
1599 #define mkdir_trivial_usage \
1600 "[OPTION] DIRECTORY..."
1601 #define mkdir_full_usage \
1602 "Create the DIRECTORY(ies) if they do not already exist\n\n" \
1604 "\t-m\tset permission mode (as in chmod), not rwxrwxrwx - umask\n" \
1605 "\t-p\tno error if existing, make parent directories as needed"
1606 #define mkdir_example_usage \
1607 "$ mkdir /tmp/foo\n" \
1608 "$ mkdir /tmp/foo\n" \
1609 "/tmp/foo: File exists\n" \
1610 "$ mkdir /tmp/foo/bar/baz\n" \
1611 "/tmp/foo/bar/baz: No such file or directory\n" \
1612 "$ mkdir -p /tmp/foo/bar/baz\n"
1614 #define mkfifo_trivial_usage \
1616 #define mkfifo_full_usage \
1617 "Creates a named pipe (identical to 'mknod name p')\n\n" \
1619 "\t-m\tcreate the pipe using the specified mode (default a=rw)"
1621 #define mkfs_minix_trivial_usage \
1622 "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
1623 #define mkfs_minix_full_usage \
1624 "Make a MINIX filesystem.\n\n" \
1626 "\t-c\t\tCheck the device for bad blocks\n" \
1627 "\t-n [14|30]\tSpecify the maximum length of filenames\n" \
1628 "\t-i INODES\tSpecify the number of inodes for the filesystem\n" \
1629 "\t-l FILENAME\tRead the bad blocks list from FILENAME\n" \
1630 "\t-v\t\tMake a Minix version 2 filesystem"
1632 #define mknod_trivial_usage \
1633 "[OPTIONS] NAME TYPE MAJOR MINOR"
1634 #define mknod_full_usage \
1635 "Create a special file (block, character, or pipe).\n\n" \
1637 "\t-m\tcreate the special file using the specified mode (default a=rw)\n\n" \
1638 "TYPEs include:\n" \
1639 "\tb:\tMake a block (buffered) device.\n" \
1640 "\tc or u:\tMake a character (un-buffered) device.\n" \
1641 "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes."
1642 #define mknod_example_usage \
1643 "$ mknod /dev/fd0 b 2 0\n" \
1644 "$ mknod -m 644 /tmp/pipe p\n"
1646 #define mkswap_trivial_usage \
1647 "[-c] [-v0|-v1] device [block-count]"
1648 #define mkswap_full_usage \
1649 "Prepare a disk partition to be used as a swap partition.\n\n" \
1651 "\t-c\t\tCheck for read-ability.\n" \
1652 "\t-v0\t\tMake version 0 swap [max 128 Megs].\n" \
1653 "\t-v1\t\tMake version 1 swap [big!] (default for kernels >\n\t\t\t2.1.117).\n" \
1654 "\tblock-count\tNumber of block to use (default is entire partition)."
1656 #define mktemp_trivial_usage \
1658 #define mktemp_full_usage \
1659 "Creates a temporary file with its name based on TEMPLATE.\n" \
1660 "TEMPLATE is any name with six `Xs' (i.e., /tmp/temp.XXXXXX)."
1661 #define mktemp_example_usage \
1662 "$ mktemp /tmp/temp.XXXXXX\n" \
1663 "/tmp/temp.mWiLjM\n" \
1664 "$ ls -la /tmp/temp.mWiLjM\n" \
1665 "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
1667 #define modprobe_trivial_usage \
1669 #define modprobe_full_usage \
1670 "Used for high level module loading and unloading."
1671 #define modprobe_example_usage \
1672 "$ modprobe cdrom\n"
1674 #define more_trivial_usage \
1676 #define more_full_usage \
1677 "More is a filter for viewing FILE one screenful at a time."
1678 #define more_example_usage \
1681 #ifdef CONFIG_FEATURE_MOUNT_LOOP
1682 #define USAGE_MOUNT_LOOP(a) a
1684 #define USAGE_MOUNT_LOOP(a)
1686 #ifdef CONFIG_FEATURE_MTAB_SUPPORT
1687 #define USAGE_MTAB(a) a
1689 #define USAGE_MTAB(a)
1691 #define mount_trivial_usage \
1692 "[flags] DEVICE NODE [-o options,more-options]"
1693 #define mount_full_usage \
1694 "Mount a filesystem. Autodetection of filesystem type requires the\n" \
1695 "/proc filesystem be already mounted.\n\n" \
1697 "\t-a:\t\tMount all filesystems in fstab.\n" \
1699 "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it.\n" \
1700 "\t-n:\t\tDon't write a mount table entry.\n" \
1702 "\t-o option:\tOne of many filesystem options, listed below.\n" \
1703 "\t-r:\t\tMount the filesystem read-only.\n" \
1704 "\t-t fs-type:\tSpecify the filesystem type.\n" \
1705 "\t-w:\t\tMount for reading and writing (default).\n" \
1707 "Options for use with the \"-o\" flag:\n" \
1708 "\tasync/sync:\tWrites are asynchronous / synchronous.\n" \
1709 "\tatime/noatime:\tEnable / disable updates to inode access times.\n" \
1710 "\tdev/nodev:\tAllow use of special device files / disallow them.\n" \
1711 "\texec/noexec:\tAllow use of executable files / disallow them.\n" \
1713 "\tloop:\t\tMounts a file via loop device.\n" \
1715 "\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them.\n" \
1716 "\tremount:\tRe-mount a mounted filesystem, changing its flags.\n" \
1717 "\tro/rw:\t\tMount for read-only / read-write.\n" \
1718 "\tbind:\t\tUse the linux 2.4.x \"bind\" feature.\n" \
1719 "\nThere are EVEN MORE flags that are specific to each filesystem.\n" \
1720 "You'll have to see the written documentation for those filesystems."
1721 #define mount_example_usage \
1723 "/dev/hda3 on / type minix (rw)\n" \
1724 "proc on /proc type proc (rw)\n" \
1725 "devpts on /dev/pts type devpts (rw)\n" \
1726 "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
1727 "$ mount /tmp/diskimage /opt -t ext2 -o loop\n"
1729 #define msvc_trivial_usage \
1730 "-[udorspchaitkx] service"
1731 #define msvc_full_usage \
1732 "[option] service\n" \
1733 "Where option is one of\n" \
1734 "\t-u\tUp. If the service is not running, start it. If the service stops, restart it.\n" \
1735 "\t-d\tDown. If the service is running, stop it, do not restart it.\n" \
1736 "\t-o\tOnce. If the service is not running, start it. Do not restart it if it stops.\n" \
1737 "\t-r\tTell supervise that the service is normally running; this affects status messages.\n" \
1738 "\t-s\tTell supervise that the service is normally stopped; this affects status messages.\n" \
1739 "\t-p\tPause. Send the service a STOP signal.\n" \
1740 "\t-c\tContinue. Send the service a CONT signal.\n" \
1741 "\t-h\tHangup. Send the service a HUP signal.\n" \
1742 "\t-a\tAlarm. Send the service an ALRM signal.\n" \
1743 "\t-i\tInterrupt. Send the service an INT signal.\n" \
1744 "\t-t\tTerminate. Send the service a TERM signal.\n" \
1745 "\t-k\tKill. Send the service a KILL signal.\n" \
1746 "\t-x\tExit. supervise will quit as soon as the service is down."
1748 #define mt_trivial_usage \
1749 "[-f device] opcode value"
1750 #define mt_full_usage \
1751 "Control magnetic tape drive operation\n" \
1752 "\nAvailable Opcodes:\n\n" \
1753 "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
1754 "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
1755 "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
1756 "setpart tell unload unlock weof wset"
1758 #define mv_trivial_usage \
1760 "or: mv SOURCE... DIRECTORY"
1761 #define mv_full_usage \
1762 "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY."
1763 #define mv_example_usage \
1764 "$ mv /tmp/foo /bin/bar\n"
1766 #define nameif_trivial_usage \
1767 "[-s] [-c FILE] [{IFNAME MACADDR}]"
1768 #define nameif_full_usage \
1769 "Nameif renaming network interface while it in the down state.\n\n" \
1771 "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \
1772 "\t-s\t\tUse syslog (LOCAL0 facility).\n" \
1773 "\tIFNAME MACADDR\tnew_interface_name interface_mac_address"
1774 #define nameif_example_usage \
1775 "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
1777 "$ nameif -c /etc/my_mactab_file\n" \
1779 #define nc_trivial_usage \
1780 "[OPTIONS] [IP] [port]"
1781 #define nc_full_usage \
1782 "Netcat opens a pipe to IP:port\n\n" \
1784 "\t-l\t\tlisten mode, for inbound connects\n" \
1785 "\t-p PORT\t\tlocal port number\n" \
1786 "\t-i SECS\t\tdelay interval for lines sent\n" \
1787 "\t-e PROG\t\tprogram to exec after connect (dangerous!)"
1788 #define nc_example_usage \
1789 "$ nc foobar.somedomain.com 25\n" \
1790 "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
1792 "214-Commands supported:\n" \
1793 "214- HELO EHLO MAIL RCPT DATA AUTH\n" \
1794 "214 NOOP QUIT RSET HELP\n" \
1796 "221 foobar closing connection\n"
1798 #define netstat_trivial_usage \
1800 #define netstat_full_usage \
1801 "Netstat displays Linux networking information.\n\n" \
1803 "\t-l display listening server sockets\n" \
1804 "\t-a display all sockets (default: connected)\n" \
1805 "\t-e display other/more information\n" \
1806 "\t-n don't resolve names\n" \
1807 "\t-r display routing table\n" \
1808 "\t-t tcp sockets\n" \
1809 "\t-u udp sockets\n" \
1810 "\t-w raw sockets\n" \
1813 #define nslookup_trivial_usage \
1815 #define nslookup_full_usage \
1816 "Queries the nameserver for the IP address of the given HOST\n" \
1817 "optionally using a specified DNS server"
1818 #define nslookup_example_usage \
1819 "$ nslookup localhost\n" \
1820 "Server: default\n" \
1821 "Address: default\n" \
1824 "Address: 127.0.0.1\n"
1826 #define od_trivial_usage \
1827 "[-aBbcDdeFfHhIiLlOovXx] [FILE]"
1828 #define od_full_usage \
1829 "Write an unambiguous representation, octal bytes by default, of FILE\n"\
1830 "to standard output. With no FILE, or when FILE is -, read standard input."
1832 #define openvt_trivial_usage \
1833 "<vtnum> <COMMAND> [ARGS...]"
1834 #define openvt_full_usage \
1835 "Start a command on a new virtual terminal"
1836 #define openvt_example_usage \
1837 "openvt 2 /bin/ash\n"
1839 #ifdef CONFIG_FEATURE_SHA1_PASSWORDS
1840 #define PASSWORD_ALG_TYPES(a) a
1842 #define PASSWORD_ALG_TYPES(a)
1844 #define passwd_trivial_usage \
1846 #define passwd_full_usage \
1847 "Change a user password. If no name is specified,\n" \
1848 "changes the password for the current user.\n" \
1850 "\t-a\tDefine which algorithm shall be used for the password.\n" \
1851 "\t\t\t(Choices: des, md5" \
1852 PASSWORD_ALG_TYPES(", sha1") \
1853 ")\n\t-d\tDelete the password for the specified user account.\n" \
1854 "\t-l\tLocks (disables) the specified user account.\n" \
1855 "\t-u\tUnlocks (re-enables) the specified user account."
1857 #define patch_trivial_usage \
1859 #define patch_full_usage \
1861 #define patch_example_usage \
1862 "$ patch -p1 <example.diff"
1864 #define pidfilehack_trivial_usage \
1865 "[daemon.pid] [daemon]"
1866 #define pidfilehack_full_usage \
1867 "service /var/run/daemon.pid /usr/sbin/daemon args...\n"
1869 #define pidof_trivial_usage \
1870 "process-name [process-name ...]"
1871 #define pidof_full_usage \
1872 "Lists the PIDs of all processes with names that match the\n" \
1873 "names on the command line"
1874 #define pidof_example_usage \
1878 #ifndef CONFIG_FEATURE_FANCY_PING
1879 #define ping_trivial_usage "host"
1880 #define ping_full_usage "Send ICMP ECHO_REQUEST packets to network hosts"
1882 #define ping_trivial_usage \
1884 #define ping_full_usage \
1885 "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
1887 "\t-c COUNT\tSend only COUNT pings.\n" \
1888 "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
1889 "\t-q\t\tQuiet mode, only displays output at start\n" \
1890 "\t\t\tand when finished."
1892 #define ping_example_usage \
1893 "$ ping localhost\n" \
1894 "PING slag (127.0.0.1): 56 data bytes\n" \
1895 "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
1897 "--- debian ping statistics ---\n" \
1898 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
1899 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
1901 #ifndef CONFIG_FEATURE_FANCY_PING6
1902 #define ping6_trivial_usage "host"
1903 #define ping6_full_usage "Send ICMP ECHO_REQUEST packets to network hosts"
1905 #define ping6_trivial_usage \
1907 #define ping6_full_usage \
1908 "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
1910 "\t-c COUNT\tSend only COUNT pings.\n" \
1911 "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
1912 "\t-q\t\tQuiet mode, only displays output at start\n" \
1913 "\t\t\tand when finished."
1915 #define ping6_example_usage \
1916 "$ ping6 ip6-localhost\n" \
1917 "PING ip6-localhost (::1): 56 data bytes\n" \
1918 "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
1920 "--- ip6-localhost ping statistics ---\n" \
1921 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
1922 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
1924 #define pivot_root_trivial_usage \
1926 #define pivot_root_full_usage \
1927 "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
1928 "the new root file system."
1930 #define poweroff_trivial_usage \
1932 #define poweroff_full_usage \
1933 "Halt the system and request that the kernel shut off the power."
1935 #define printf_trivial_usage \
1936 "FORMAT [ARGUMENT...]"
1937 #define printf_full_usage \
1938 "Formats and prints ARGUMENT(s) according to FORMAT,\n" \
1939 "Where FORMAT controls the output exactly as in C printf."
1940 #define printf_example_usage \
1941 "$ printf "Val=%d\\n" 5\n" \
1944 #ifdef CONFIG_SELINUX
1945 #define USAGE_NONSELINUX(a)
1947 #define USAGE_NONSELINUX(a) a
1950 #define ps_trivial_usage \
1952 #define ps_full_usage \
1953 "Report process status\n" \
1954 USAGE_NONSELINUX("\n\tThis version of ps accepts no options.") \
1955 USAGE_SELINUX("\nOptions:\n\t-c\tshow SE Linux context")
1957 #define ps_example_usage \
1959 " PID Uid Gid State Command\n" \
1960 " 1 root root S init\n" \
1961 " 2 root root S [kflushd]\n" \
1962 " 3 root root S [kupdate]\n" \
1963 " 4 root root S [kpiod]\n" \
1964 " 5 root root S [kswapd]\n" \
1965 " 742 andersen andersen S [bash]\n" \
1966 " 743 andersen andersen S -bash\n" \
1967 " 745 root root S [getty]\n" \
1968 " 2990 andersen andersen R ps\n"
1970 #define pwd_trivial_usage \
1972 #define pwd_full_usage \
1973 "Print the full filename of the current working directory."
1974 #define pwd_example_usage \
1978 #define raid_start_trivial_usage \
1979 "MD_DEVICE DISK_DEVICE"
1980 #define raid_start_full_usage \
1981 "Start MD_DEVICE, taking superblock from DISK_DEVICE.\n" \
1982 "Example: raid_start /dev/md0 /dev/sdb"
1984 #define rdate_trivial_usage \
1986 #define rdate_full_usage \
1987 "Get and possibly set the system date and time from a remote HOST.\n\n" \
1989 "\t-s\tSet the system date and time (default).\n" \
1990 "\t-p\tPrint the date and time."
1992 #define readlink_trivial_usage \
1994 #define readlink_full_usage \
1995 "Displays the value of a symbolic link."
1997 #define realpath_trivial_usage \
1999 #define realpath_full_usage \
2000 "Returns the absolute pathnames of given argument."
2002 #define reboot_trivial_usage \
2004 #define reboot_full_usage \
2005 "Reboot the system."
2007 #define renice_trivial_usage \
2008 "priority pid [pid ...]"
2009 #define renice_full_usage \
2010 "Changes priority of running processes. Allowed priorities range\n" \
2011 "from 20 (the process runs only when nothing else is running) to 0\n" \
2012 "(default priority) to -20 (almost nothing else ever gets to run)."
2014 #define reset_trivial_usage \
2016 #define reset_full_usage \
2017 "Resets the screen."
2019 #define rm_trivial_usage \
2020 "[OPTION]... FILE..."
2021 #define rm_full_usage \
2022 "Remove (unlink) the FILE(s). You may use '--' to\n" \
2023 "indicate that all following arguments are non-options.\n\n" \
2025 "\t-i\t\talways prompt before removing each destination\n" \
2026 "\t-f\t\tremove existing destinations, never prompt\n" \
2027 "\t-r or -R\tremove the contents of directories recursively"
2028 #define rm_example_usage \
2029 "$ rm -rf /tmp/foo\n"
2031 #define rmdir_trivial_usage \
2032 "[OPTION]... DIRECTORY..."
2033 #define rmdir_full_usage \
2034 "Remove the DIRECTORY(ies), if they are empty."
2035 #define rmdir_example_usage \
2036 "# rmdir /tmp/foo\n"
2038 #define rmmod_trivial_usage \
2039 "[OPTION]... [MODULE]..."
2040 #define rmmod_full_usage \
2041 "Unloads the specified kernel modules from the kernel.\n\n" \
2043 "\t-a\tRemove all unused modules (recursively)"
2044 #define rmmod_example_usage \
2047 #ifdef CONFIG_FEATURE_IPV6
2048 #define USAGE_ROUTE_IPV6(a) a
2050 #define USAGE_ROUTE_IPV6(a) "\t"
2054 #define route_trivial_usage \
2055 "[{add|del|delete}]"
2056 #define route_full_usage \
2057 "Edit the kernel's routing tables.\n\n" \
2059 "\t-n\t\tDont resolve names.\n" \
2060 "\t-e\t\tDisplay other/more information.\n" \
2061 "\t-A inet" USAGE_ROUTE_IPV6("{6}") "\tSelect address family."
2063 #define rpm_trivial_usage \
2064 "-i -q[ildc]p package.rpm"
2065 #define rpm_full_usage \
2066 "Manipulates RPM packages" \
2068 "\n\t-i Install package" \
2069 "\n\t-q Query package" \
2070 "\n\t-p Query uninstalled package" \
2071 "\n\t-i Show information" \
2072 "\n\t-l List contents" \
2073 "\n\t-d List documents" \
2074 "\n\t-c List config files"
2076 #define rpm2cpio_trivial_usage \
2078 #define rpm2cpio_full_usage \
2079 "Outputs a cpio archive of the rpm file."
2081 #define run_parts_trivial_usage \
2082 "[-t] [-a ARG] [-u MASK] DIRECTORY"
2083 #define run_parts_full_usage \
2084 "Run a bunch of scripts in a directory.\n\n" \
2086 "\t-t\tPrints what would be run, but does not actually run anything.\n" \
2087 "\t-a ARG\tPass ARG as an argument for every program invoked.\n" \
2088 "\t-u MASK\tSet the umask to MASK before executing every program."
2090 #define rx_trivial_usage \
2092 #define rx_full_usage \
2093 "Receive a file using the xmodem protocol."
2094 #define rx_example_usage \
2097 #define sed_trivial_usage \
2098 "[-nef] pattern [files...]"
2099 #define sed_full_usage \
2101 "\t-n\t\tsuppress automatic printing of pattern space\n" \
2102 "\t-e script\tadd the script to the commands to be executed\n" \
2103 "\t-f scriptfile\tadd script-file contents to the\n" \
2104 "\t\t\tcommands to be executed\n" \
2105 "\t-i\t\tEdit files in-place\n" \
2107 "If no -e or -f is given, the first non-option argument is taken as the sed\n"\
2108 "script to interpret. All remaining arguments are names of input files; if no\n"\
2109 "input files are specified, then the standard input is read. Source files\n" \
2110 "will not be modified unless -i option is given."
2112 #define sed_example_usage \
2113 "$ echo "foo" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
2116 #define seq_trivial_usage \
2117 "[first [increment]] last"
2118 #define seq_full_usage \
2119 "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \
2120 "FIRST, INCREMENT default to 1\n" \
2124 "\tFIRST\tINCREMENT\tLAST"
2126 #define setkeycodes_trivial_usage \
2127 "SCANCODE KEYCODE ..."
2128 #define setkeycodes_full_usage \
2129 "Set entries into the kernel's scancode-to-keycode map,\n" \
2130 "allowing unusual keyboards to generate usable keycodes.\n\n" \
2131 "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
2132 "and KEYCODE is given in decimal"
2133 #define setkeycodes_example_usage \
2134 "$ setkeycodes e030 127\n"
2136 #define lash_trivial_usage \
2138 "or: sh -c command [args]..."
2139 #define lash_full_usage \
2140 "The BusyBox LAme SHell (command interpreter)"
2141 #define lash_notes_usage \
2142 "This command does not yet have proper documentation.\n\n" \
2143 "Use lash just as you would use any other shell. It properly handles pipes,\n" \
2144 "redirects, job control, can be used as the shell for scripts, and has a\n" \
2145 "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
2146 "Bourne Shell syntax. If you need things like "if-then-else", "while", and such\n" \
2147 "use ash or bash. If you just need a very simple and extremely small shell,\n" \
2148 "this will do the job."
2150 #define last_trivial_usage \
2152 #define last_full_usage \
2153 "Shows listing of the last users that logged into the system"
2155 #define sha1sum_trivial_usage \
2156 "[OPTION] [FILEs...]" \
2157 USAGE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
2158 #define sha1sum_full_usage \
2159 "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n\n" \
2161 "With no FILE, or when FILE is -, read standard input." \
2162 USAGE_MD5_SHA1_SUM_CHECK("\n\n" \
2163 "\t-c\tcheck SHA1 sums against given list\n" \
2164 "\nThe following two options are useful only when verifying checksums:\n" \
2165 "\t-s\tdon't output anything, status code shows success\n" \
2166 "\t-w\twarn about improperly formated SHA1 checksum lines")
2168 #ifdef CONFIG_FEATURE_FANCY_SLEEP
2169 #define USAGE_FANCY_SLEEP(a) a
2170 #define USAGE_NOT_FANCY_SLEEP(a)
2172 #define USAGE_FANCY_SLEEP(a)
2173 #define USAGE_NOT_FANCY_SLEEP(a) a
2176 #define sleep_trivial_usage \
2177 USAGE_FANCY_SLEEP("[") "N" USAGE_FANCY_SLEEP("]...")
2178 #define sleep_full_usage \
2179 USAGE_NOT_FANCY_SLEEP("Pause for N seconds.") \
2180 USAGE_FANCY_SLEEP( \
2181 "Pause for a time equal to the total of the args given, where each arg can\n" \
2182 "\t\thave an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
2183 #define sleep_example_usage \
2185 "[2 second delay results]\n" \
2186 USAGE_FANCY_SLEEP("$ sleep 1d 3h 22m 8s\n" \
2187 "[98528 second delay results]\n")
2189 #ifdef CONFIG_FEATURE_SORT_UNIQUE
2190 #define USAGE_SORT_UNIQUE(a) a
2192 #define USAGE_SORT_UNIQUE(a)
2194 #ifdef CONFIG_FEATURE_SORT_REVERSE
2195 #define USAGE_SORT_REVERSE(a) a
2197 #define USAGE_SORT_REVERSE(a)
2199 #define sort_trivial_usage \
2200 "[-n" USAGE_SORT_REVERSE("r") USAGE_SORT_UNIQUE("u") "] [FILE]..."
2201 #define sort_full_usage \
2202 "Sorts lines of text in the specified files\n\n"\
2204 USAGE_SORT_UNIQUE("\t-u\tsuppress duplicate lines\n") \
2205 USAGE_SORT_REVERSE("\t-r\tsort in reverse order\n") \
2206 "\t-n\tsort numerics"
2207 #define sort_example_usage \
2208 "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
2216 #define start_stop_daemon_trivial_usage \
2217 "[OPTIONS] [--start|--stop] ... [-- arguments...]\n"
2218 #define start_stop_daemon_full_usage \
2219 "Program to start and stop services."\
2221 "\n\t-S|--start\t\t\tstart"\
2222 "\n\t-K|--stop\t\t\tstop"\
2223 "\n\t-a|--startas <pathname>\t\tstarts process specified by pathname"\
2224 "\n\t-b|--background\t\t\tforce process into background"\
2225 "\n\t-u|--user <username>|<uid>\tstop this user's processes"\
2226 "\n\t-x|--exec <executable>\t\tprogram to either start or check"\
2227 "\n\t-m|--make-pidfile <filename>\tcreate the -p file and enter pid in it"\
2228 "\n\t-n|--name <process-name>\tstop processes with this name"\
2229 "\n\t-p|--pidfile <pid-file>\t\tsave or load pid using a pid-file"\
2230 "\n\t-q|--quiet\t\t\tbe quiet" \
2231 "\n\t-s|--signal <signal>\t\tsignal to send (default TERM)"
2233 #define strings_trivial_usage \
2234 "[-afo] [-n length] [file ... ]"
2235 #define strings_full_usage \
2236 "Display printable strings in a binary file." \
2238 "\n\t-f\tPrecede each string with the name of the file where it was found." \
2239 "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \
2240 "\n\t-o\tEach string is preceded by its decimal offset in the file."
2242 #define stty_trivial_usage \
2243 "[-a|g] [-F DEVICE] [SETTING]..."
2244 #define stty_full_usage \
2245 "Without arguments, prints baud rate, line discipline," \
2246 "\nand deviations from stty sane." \
2248 "\n\t-F DEVICE\topen device instead of stdin" \
2249 "\n\t-a\t\tprint all current settings in human-readable form" \
2250 "\n\t-g\t\tprint in stty-readable form" \
2251 "\n\t[SETTING]\tsee manpage"
2253 #define su_trivial_usage \
2254 "[OPTION]... [-] [username]"
2255 #define su_full_usage \
2256 "Change user id or become root.\n" \
2258 "\t-p\tPreserve environment"
2260 #define sulogin_trivial_usage \
2261 "[OPTION]... [tty-device]"
2262 #define sulogin_full_usage \
2263 "Single user login\n" \
2265 "\t-f\tDo not authenticate (user already authenticated)\n" \
2266 "\t-h\tName of the remote host for this login.\n" \
2267 "\t-p\tPreserve environment."
2269 #define swapoff_trivial_usage \
2271 #define swapoff_full_usage \
2272 "Stop swapping virtual memory pages on DEVICE.\n\n" \
2274 "\t-a\tStop swapping on all swap devices"
2276 #define swapon_trivial_usage \
2278 #define swapon_full_usage \
2279 "Start swapping virtual memory pages on DEVICE.\n\n" \
2281 "\t-a\tStart swapping on all swap devices"
2283 #define sync_trivial_usage \
2285 #define sync_full_usage \
2286 "Write all buffered filesystem blocks to disk."
2289 #ifdef CONFIG_FEATURE_ROTATE_LOGFILE
2290 #define USAGE_ROTATE_LOGFILE(a) a
2292 #define USAGE_ROTATE_LOGFILE(a)
2294 #ifdef CONFIG_FEATURE_REMOTE_LOG
2295 #define USAGE_REMOTE_LOG(a) a
2297 #define USAGE_REMOTE_LOG(a)
2299 #ifdef CONFIG_FEATURE_IPC_SYSLOG
2300 #define USAGE_IPC_LOG(a) a
2302 #define USAGE_IPC_LOG(a)
2305 #ifdef CONFIG_SYSCTL
2306 #define sysctl_trivial_usage \
2307 "[OPTIONS]... [VALUE]...\n"
2308 #define sysctl_full_usage
2309 "sysctl - configure kernel parameters at runtime\n\n" \
2311 "\t-n\tUse this option to disable printing of the key name when printing values.\n" \
2312 "\t-e\tUse this option to ignore errors about unknown keys.\n" \
2313 "\t-w\tUse this option when you want to change a sysctl setting.\n" \
2314 "\t-p\tLoad in sysctl settings from the file specified or /etc/sysctl.conf if none given.\n" \
2315 "\t-a\tDisplay all values currently available.\n" \
2316 "\t-A\tDisplay all values currently available in table form."
2317 #define sysctl_example_usage
2318 "sysctl [-n] [-e] variable ...\n" \
2319 "sysctl [-n] [-e] -w variable=value ...\n" \
2320 "sysctl [-n] [-e] -a\n" \
2321 "sysctl [-n] [-e] -p <file>\t(default /etc/sysctl.conf)\n" \
2322 "sysctl [-n] [-e] -A\n"
2325 #define syslogd_trivial_usage \
2327 #define syslogd_full_usage \
2328 "Linux system and kernel logging utility.\n" \
2329 "Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \
2331 "\t-m MIN\t\tMinutes between MARK lines (default=20, 0=off)\n" \
2332 "\t-n\t\tRun as a foreground process\n" \
2333 "\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)" \
2334 USAGE_ROTATE_LOGFILE( \
2335 "\n\t-s SIZE\t\tMax size (KB) before rotate (default=200KB, 0=off)\n" \
2336 "\t-b NUM\t\tNumber of rotated logs to keep (default=1, max=99, 0=purge)") \
2338 "\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \
2339 "\t-L\t\tLog locally and via network logging (default is network only)") \
2341 "\n\t-C [size(KiB)]\tLog to a circular buffer (read the buffer using logread)")
2342 #define syslogd_example_usage \
2343 "$ syslogd -R masterlog:514\n" \
2344 "$ syslogd -R 192.168.1.1:601\n"
2347 #ifndef CONFIG_FEATURE_FANCY_TAIL
2348 #define USAGE_UNSIMPLE_TAIL(a)
2350 #define USAGE_UNSIMPLE_TAIL(a) a
2352 #define tail_trivial_usage \
2353 "[OPTION]... [FILE]..."
2354 #define tail_full_usage \
2355 "Print last 10 lines of each FILE to standard output.\n" \
2356 "With more than one FILE, precede each with a header giving the\n" \
2357 "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
2359 USAGE_UNSIMPLE_TAIL("\t-c N[kbm]\toutput the last N bytes\n") \
2360 "\t-n N[kbm]\tprint last N lines instead of last 10\n" \
2361 "\t-f\t\toutput data as the file grows" \
2362 USAGE_UNSIMPLE_TAIL( "\n\t-q\t\tnever output headers giving file names\n" \
2363 "\t-s SEC\t\twait SEC seconds between reads with -f\n" \
2364 "\t-v\t\talways output headers giving file names\n\n" \
2365 "If the first character of N (bytes or lines) is a '+', output begins with \n" \
2366 "the Nth item from the start of each file, otherwise, print the last N items\n" \
2367 "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
2368 #define tail_example_usage \
2369 "$ tail -n 1 /etc/resolv.conf\n" \
2370 "nameserver 10.0.0.1\n"
2372 #ifdef CONFIG_FEATURE_TAR_CREATE
2373 #define USAGE_TAR_CREATE(a) a
2375 #define USAGE_TAR_CREATE(a)
2377 #ifdef CONFIG_FEATURE_TAR_EXCLUDE
2378 #define USAGE_TAR_EXCLUDE(a) a
2380 #define USAGE_TAR_EXCLUDE(a)
2382 #ifdef CONFIG_FEATURE_TAR_GZIP
2383 #define USAGE_TAR_GZIP(a) a
2385 #define USAGE_TAR_GZIP(a)
2387 #ifdef CONFIG_FEATURE_TAR_BZIP2
2388 #define USAGE_TAR_BZIP2(a) a
2390 #define USAGE_TAR_BZIP2(a)
2392 #ifdef CONFIG_FEATURE_TAR_COMPRESS
2393 #define USAGE_TAR_COMPRESS(a) a
2395 #define USAGE_TAR_COMPRESS(a)
2398 #define tar_trivial_usage \
2399 "-[" USAGE_TAR_CREATE("c") USAGE_TAR_GZIP("z") USAGE_TAR_BZIP2("j") USAGE_TAR_COMPRESS("Z") "xtvO] " \
2400 USAGE_TAR_EXCLUDE("[-X FILE]") \
2401 "[-f TARFILE] [-C DIR] [FILE(s)] ..."
2402 #define tar_full_usage \
2403 "Create, extract, or list files from a tar file.\n\n" \
2405 USAGE_TAR_CREATE("\tc\t\tcreate\n") \
2406 "\tx\t\textract\n" \
2408 "\nArchive format selection:\n" \
2409 USAGE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \
2410 USAGE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \
2411 USAGE_TAR_COMPRESS("\tZ\t\tFilter the archive through compress\n") \
2412 "\nFile selection:\n" \
2413 "\tf\t\tname of TARFILE or \"-\" for stdin\n" \
2414 "\tO\t\textract to stdout\n" \
2415 USAGE_TAR_EXCLUDE( \
2416 "\texclude\t\tfile to exclude\n" \
2417 "\tX\t\tfile with names to exclude\n" \
2419 "\tC\t\tchange to directory DIR before operation\n" \
2420 "\tv\t\tverbosely list files processed"
2421 #define tar_example_usage \
2422 "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
2423 "$ tar -cf /tmp/tarball.tar /usr/local\n"
2425 #define tee_trivial_usage \
2426 "[OPTION]... [FILE]..."
2427 #define tee_full_usage \
2428 "Copy standard input to each FILE, and also to standard output.\n\n" \
2430 "\t-a\tappend to the given FILEs, do not overwrite\n" \
2431 "\t-i\tignore interrupt signals (SIGINT)"
2432 #define tee_example_usage \
2433 "$ echo "Hello" | tee /tmp/foo\n" \
2434 "$ cat /tmp/foo\n" \
2437 #ifdef CONFIG_FEATURE_TELNET_AUTOLOGIN
2438 #define telnet_trivial_usage \
2439 "[-a] [-l USER] HOST [PORT]"
2440 #define telnet_full_usage \
2441 "Telnet is used to establish interactive communication with another\n" \
2442 "computer over a network using the TELNET protocol.\n\n" \
2444 "\t-a\t\tAttempt an automatic login with the USER variable.\n" \
2445 "\t-l USER\t\tAttempt an automatic login with the USER argument.\n" \
2446 "\tHOST\t\tThe official name, alias or the IP address of the\n" \
2447 "\t\t\tremote host.\n" \
2448 "\tPORT\t\tThe remote port number to connect to. If it is not\n" \
2449 "\t\t\tspecified, the default telnet (23) port is used."
2451 #define telnet_trivial_usage \
2453 #define telnet_full_usage \
2454 "Telnet is used to establish interactive communication with another\n"\
2455 "computer over a network using the TELNET protocol."
2458 #ifdef CONFIG_FEATURE_TELNETD_INETD
2459 #define telnetd_trivial_usage \
2460 "(inetd mode) [OPTION]"
2461 #define telnetd_full_usage \
2462 "Telnetd uses incoming TELNET connections via inetd.\n"\
2464 "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)"
2466 #define telnetd_trivial_usage \
2468 #define telnetd_full_usage \
2469 "Telnetd listens for incoming TELNET connections on PORT.\n"\
2471 "\t-p PORT\tlisten for connections on PORT (default 23)\n"\
2472 "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)"
2475 #define test_trivial_usage \
2476 "EXPRESSION\n or [ EXPRESSION ]"
2477 #define test_full_usage \
2478 "Checks file types and compares values returning an exit\n" \
2479 "code determined by the value of EXPRESSION."
2480 #define test_example_usage \
2481 "$ test 1 -eq 2\n" \
2484 "$ test 1 -eq 1\n" \
2490 "$ [ -d /junk ]\n" \
2494 #ifdef CONFIG_FEATURE_TFTP_GET
2495 #define USAGE_TFTP_GET(a) a
2497 #define USAGE_TFTP_GET(a)
2499 #ifdef CONFIG_FEATURE_TFTP_PUT
2500 #define USAGE_TFTP_PUT(a) a
2502 #define USAGE_TFTP_PUT(a)
2504 #ifdef CONFIG_FEATURE_TFTP_BLOCKSIZE
2505 #define USAGE_TFTP_BS(a) a
2507 #define USAGE_TFTP_BS(a)
2510 #define tftp_trivial_usage \
2511 "[OPTION]... HOST [PORT]"
2512 #define tftp_full_usage \
2513 "Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \
2515 "\t-l FILE\tLocal FILE.\n" \
2516 "\t-r FILE\tRemote FILE." \
2518 "\n\t-g\tGet file." \
2521 "\n\t-p\tPut file." \
2524 "\n\t-b SIZE\tTransfer blocks of SIZE octets." \
2526 #define time_trivial_usage \
2527 "[OPTION]... COMMAND [ARGS...]"
2528 #define time_full_usage \
2529 "Runs the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
2530 "COMMAND's resource usage information is displayed\n\n" \
2532 "\t-v\tDisplays verbose resource usage information."
2534 #define top_trivial_usage \
2536 #define top_full_usage \
2537 "top provides an view of processor activity in real time.\n" \
2538 "This utility reads the status for all processes in /proc each <seconds>\n" \
2539 "and shows the status for however many processes will fit on the screen.\n" \
2540 "This utility will not show processes that are started after program startup,\n" \
2541 "but it will show the EXIT status for and PIDs that exit while it is running."
2543 #define touch_trivial_usage \
2544 "[-c] FILE [FILE ...]"
2545 #define touch_full_usage \
2546 "Update the last-modified date on the given FILE[s].\n\n" \
2548 "\t-c\tDo not create any files"
2549 #define touch_example_usage \
2550 "$ ls -l /tmp/foo\n" \
2551 "/bin/ls: /tmp/foo: No such file or directory\n" \
2552 "$ touch /tmp/foo\n" \
2553 "$ ls -l /tmp/foo\n" \
2554 "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
2556 #define tr_trivial_usage \
2557 "[-cds] STRING1 [STRING2]"
2558 #define tr_full_usage \
2559 "Translate, squeeze, and/or delete characters from\n" \
2560 "standard input, writing to standard output.\n\n" \
2562 "\t-c\ttake complement of STRING1\n" \
2563 "\t-d\tdelete input characters coded STRING1\n" \
2564 "\t-s\tsqueeze multiple output characters of STRING2 into one character"
2565 #define tr_example_usage \
2566 "$ echo "gdkkn vnqkc" | tr [a-y] [b-z]\n" \
2569 #define traceroute_trivial_usage \
2570 "[-dnrv] [-m max_ttl] [-p port#] [-q nqueries]\n"\
2571 "\t[-s src_addr] [-t tos] [-w wait] host [data size]"
2572 #define traceroute_full_usage \
2573 "trace the route ip packets follow going to \"host\"\n" \
2575 "\t-d\tset SO_DEBUG options to socket\n" \
2576 "\t-n\tPrint hop addresses numerically rather than symbolically\n" \
2577 "\t-r\tBypass the normal routing tables and send directly to a host\n" \
2578 "\t-v\tVerbose output\n" \
2579 "\t-m max_ttl\tSet the max time-to-live (max number of hops)\n" \
2580 "\t-p port#\tSet the base UDP port number used in probes\n" \
2581 "\t\t(default is 33434)\n" \
2582 "\t-q nqueries\tSet the number of probes per ``ttl'' to nqueries\n" \
2583 "\t\t(default is 3)\n" \
2584 "\t-s src_addr\tUse the following IP address as the source address\n" \
2585 "\t-t tos\tSet the type-of-service in probe packets to the following value\n" \
2586 "\t\t(default 0)\n" \
2587 "\t-w wait\tSet the time (in seconds) to wait for a response to a probe\n" \
2588 "\t\t(default 3 sec.)."
2591 #define true_trivial_usage \
2593 #define true_full_usage \
2594 "Return an exit code of TRUE (0)."
2595 #define true_example_usage \
2600 #define tty_trivial_usage \
2602 #define tty_full_usage \
2603 "Print the file name of the terminal connected to standard input.\n\n"\
2605 "\t-s\tprint nothing, only return an exit status"
2606 #define tty_example_usage \
2610 #define udhcpc_trivial_usage \
2611 "[-fbnqv] [-c CLIENTID] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
2612 #define udhcpc_full_usage \
2613 "\t-c,\t--clientid=CLIENTID\tClient identifier\n" \
2614 "\t-H,\t--hostname=HOSTNAME\tClient hostname\n" \
2615 "\t-h,\t \tAlias for -H\n" \
2616 "\t-f,\t--foreground\tDo not fork after getting lease\n" \
2617 "\t-b,\t--background\tFork to background if lease cannot be immediately negotiated.\n" \
2618 "\t-i,\t--interface=INTERFACE\tInterface to use (default: eth0)\n" \
2619 "\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated.\n" \
2620 "\t-p,\t--pidfile=file\tStore process ID of daemon in file\n" \
2621 "\t-q,\t--quit\tQuit after obtaining lease\n" \
2622 "\t-r,\t--request=IP\tIP address to request (default: none)\n" \
2623 "\t-s,\t--script=file\tRun file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \
2624 "\t-v,\t--version\tDisplay version"
2626 #define udhcpd_trivial_usage \
2629 #define udhcpd_full_usage \
2632 #ifdef CONFIG_FEATURE_MOUNT_FORCE
2633 #define USAGE_MOUNT_FORCE(a) a
2635 #define USAGE_MOUNT_FORCE(a)
2637 #define umount_trivial_usage \
2638 "[flags] FILESYSTEM|DIRECTORY"
2639 #define umount_full_usage \
2640 "Unmount file systems\n" \
2641 "\nFlags:\n" "\t-a\tUnmount all file systems" \
2642 USAGE_MTAB(" in /etc/mtab\n\t-n\tDon't erase /etc/mtab entries") \
2643 "\n\t-r\tTry to remount devices as read-only if mount is busy" \
2644 USAGE_MOUNT_FORCE("\n\t-f\tForce umount (i.e., unreachable NFS server)") \
2645 USAGE_MOUNT_LOOP("\n\t-l\tDo not free loop device (if a loop device has been used)")
2646 #define umount_example_usage \
2647 "$ umount /dev/hdc1 \n"
2649 #define uname_trivial_usage \
2651 #define uname_full_usage \
2652 "Print certain system information. With no OPTION, same as -s.\n\n" \
2654 "\t-a\tprint all information\n" \
2655 "\t-m\tthe machine (hardware) type\n" \
2656 "\t-n\tprint the machine's network node hostname\n" \
2657 "\t-r\tprint the operating system release\n" \
2658 "\t-s\tprint the operating system name\n" \
2659 "\t-p\tprint the host processor type\n" \
2660 "\t-v\tprint the operating system version"
2661 #define uname_example_usage \
2663 "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
2665 #define uncompress_trivial_usage \
2666 "[-c] [-f] [ name ... ]"
2667 #define uncompress_full_usage \
2668 "Uncompress .Z file[s]\n" \
2670 "\t-c\textract to stdout\n" \
2671 "\t-f\tforce overwrite an existing file"
2673 #define uniq_trivial_usage \
2674 "[OPTION]... [INPUT [OUTPUT]]"
2675 #define uniq_full_usage \
2676 "Discard all but one of successive identical lines from INPUT\n" \
2677 "(or standard input), writing to OUTPUT (or standard output).\n\n" \
2679 "\t-c\tprefix lines by the number of occurrences\n" \
2680 "\t-d\tonly print duplicate lines\n" \
2681 "\t-u\tonly print unique lines\n" \
2682 "\t-f N\tskip the first N fields\n" \
2683 "\t-s N\tskip the first N chars (after any skipped fields)"
2684 #define uniq_example_usage \
2685 "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
2690 #define unix2dos_trivial_usage \
2692 #define unix2dos_full_usage \
2693 "Converts FILE from unix format to dos format. When no option\n" \
2694 "is given, the input is converted to the opposite output format.\n" \
2695 "When no file is given, uses stdin for input and stdout for output.\n" \
2697 "\t-u\toutput will be in UNIX format\n" \
2698 "\t-d\toutput will be in DOS format"
2700 #define unzip_trivial_usage \
2701 "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
2702 #define unzip_full_usage \
2703 "Extracts files from ZIP archives.\n\n" \
2705 "\t-l\tlist archive contents (short form)\n" \
2706 "\t-n\tnever overwrite existing files (default)\n" \
2707 "\t-o\toverwrite files without prompting\n" \
2708 "\t-p\tsend output to stdout\n" \
2709 "\t-q\tbe quiet\n" \
2710 "\t-x\texclude these files\n" \
2711 "\t-d\textract files into this directory"
2713 #define uptime_trivial_usage \
2715 #define uptime_full_usage \
2716 "Display the time since the last boot."
2717 #define uptime_example_usage \
2719 " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
2721 #define usleep_trivial_usage \
2723 #define usleep_full_usage \
2724 "Pause for N microseconds."
2725 #define usleep_example_usage \
2726 "$ usleep 1000000\n" \
2727 "[pauses for 1 second]\n"
2729 #define uudecode_trivial_usage \
2731 #define uudecode_full_usage \
2732 "Uudecode a file that is uuencoded.\n\n" \
2734 "\t-o FILE\tdirect output to FILE"
2735 #define uudecode_example_usage \
2736 "$ uudecode -o busybox busybox.uu\n" \
2737 "$ ls -l busybox\n" \
2738 "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
2740 #define uuencode_trivial_usage \
2741 "[OPTION] [INFILE] REMOTEFILE"
2742 #define uuencode_full_usage \
2743 "Uuencode a file.\n\n" \
2745 "\t-m\tuse base64 encoding per RFC1521"
2746 #define uuencode_example_usage \
2747 "$ uuencode busybox busybox\n" \
2748 "begin 755 busybox\n" \
2749 "<encoded file snipped>\n" \
2750 "$ uudecode busybox busybox > busybox.uu\n" \
2753 #define vconfig_trivial_usage \
2754 "COMMAND [OPTIONS] ..."
2755 #define vconfig_full_usage \
2756 "vconfig lets you create and remove virtual ethernet devices.\n\n" \
2758 "\tadd [interface-name] [vlan_id]\n" \
2759 "\trem [vlan-name]\n" \
2760 "\tset_flag [interface-name] [flag-num] [0 | 1]\n" \
2761 "\tset_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
2762 "\tset_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
2763 "\tset_name_type [name-type]"
2765 #define vi_trivial_usage \
2766 "[OPTION] [FILE]..."
2767 #define vi_full_usage \
2770 "\t-R\tRead-only- do not write to the file."
2772 #define vlock_trivial_usage \
2774 #define vlock_full_usage \
2775 "Lock a virtual terminal. A password is required to unlock\n" \
2777 "\t-a\tLock all VTs"
2779 #define watch_trivial_usage \
2780 "[-n <seconds>] COMMAND..."
2781 #define watch_full_usage \
2782 "Executes a program periodically.\n" \
2784 "\t-n\tLoop period in seconds - default is 2."
2785 #define watch_example_usage \
2787 "Mon Dec 17 10:31:40 GMT 2000\n" \
2788 "Mon Dec 17 10:31:42 GMT 2000\n" \
2789 "Mon Dec 17 10:31:44 GMT 2000"
2791 #define watchdog_trivial_usage \
2792 "[-t <seconds>] DEV"
2793 #define watchdog_full_usage \
2794 "Periodically write to watchdog device DEV.\n" \
2796 "\t-t\tTimer period in seconds - default is 30."
2798 #define wc_trivial_usage \
2799 "[OPTION]... [FILE]..."
2800 #define wc_full_usage \
2801 "Print line, word, and byte counts for each FILE, and a total line if\n" \
2802 "more than one FILE is specified. With no FILE, read standard input.\n\n" \
2804 "\t-c\tprint the byte counts\n" \
2805 "\t-l\tprint the newline counts\n" \
2806 "\t-L\tprint the length of the longest line\n" \
2807 "\t-w\tprint the word counts"
2808 #define wc_example_usage \
2809 "$ wc /etc/passwd\n" \
2810 " 31 46 1365 /etc/passwd\n"
2812 #define wget_trivial_usage \
2813 "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \
2814 "\t\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url"
2815 #define wget_full_usage \
2816 "wget retrieves files via HTTP or FTP\n\n" \
2818 "\t-c\tcontinue retrieval of aborted transfers\n" \
2819 "\t-q\tquiet mode - do not print\n" \
2820 "\t-P\tSet directory prefix to DIR\n" \
2821 "\t-O\tsave to filename ('-' for stdout)\n" \
2822 "\t-Y\tuse proxy ('on' or 'off')"
2824 #define which_trivial_usage \
2826 #define which_full_usage \
2827 "Locates a COMMAND."
2828 #define which_example_usage \
2832 #define who_trivial_usage \
2834 #define who_full_usage \
2835 "Prints the current user names and related information"
2837 #define whoami_trivial_usage \
2839 #define whoami_full_usage \
2840 "Prints the user name associated with the current effective user id."
2842 #ifdef CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION
2843 #define USAGE_XARGS_CONFIRMATION(a) a
2845 #define USAGE_XARGS_CONFIRMATION(a)
2847 #ifdef CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT
2848 #define USAGE_XARGS_TERMOPT(a) a
2850 #define USAGE_XARGS_TERMOPT(a)
2852 #ifdef CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM
2853 #define USAGE_XARGS_ZERO_TERM(a) a
2855 #define USAGE_XARGS_ZERO_TERM(a)
2859 #define xargs_trivial_usage \
2860 "[COMMAND] [OPTIONS] [ARGS...]"
2861 #define xargs_full_usage \
2862 "Executes COMMAND on every item given by standard input.\n\n" \
2864 USAGE_XARGS_CONFIRMATION("\t-p\tPrompt the user about whether to run each command\n") \
2865 "\t-r\tDo not run command for empty readed lines\n" \
2866 USAGE_XARGS_TERMOPT("\t-x\tExit if the size is exceeded\n") \
2867 USAGE_XARGS_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \
2868 "\t-t\tPrint the command line on stderr before executing it."
2869 #define xargs_example_usage \
2870 "$ ls | xargs gzip\n" \
2871 "$ find . -name '*.c' -print | xargs rm\n"
2873 #define yes_trivial_usage \
2874 "[OPTION]... [STRING]..."
2875 #define yes_full_usage \
2876 "Repeatedly outputs a line with all specified STRING(s), or 'y'."
2878 #define zcat_trivial_usage \
2880 #define zcat_full_usage \
2881 "Uncompress to stdout."
2883 #endif /* __BB_USAGE_H__ */