1 /* vi: set sw=8 ts=8: */
3 * This file suffers from chronically incorrect tabification
4 * of messages. Before editing this file:
5 * 1. Switch you editor to 8-space tab mode.
6 * 2. Do not use \t in messages, use real tab character.
7 * 3. Start each source line with message as follows:
8 * |<7 spaces>"text with tabs"....
11 #ifndef __BB_USAGE_H__
12 #define __BB_USAGE_H__
14 #define addgroup_trivial_usage \
15 "[-g GID] group_name [user_name]"
16 #define addgroup_full_usage \
17 "Add a group to the system" \
21 #define adduser_trivial_usage \
23 #define adduser_full_usage \
24 "Add a user to the system" \
26 " -h DIR Assign home directory DIR\n" \
27 " -g GECOS Assign gecos field GECOS\n" \
28 " -s SHELL Assign login shell SHELL\n" \
29 " -G Add the user to existing group GROUP\n" \
30 " -S Create a system user (ignored)\n" \
31 " -D Do not assign a password (logins still possible via ssh)\n" \
32 " -H Do not create the home directory"
34 #define adjtimex_trivial_usage \
35 "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
36 #define adjtimex_full_usage \
37 "Read and optionally set system timebase parameters.\n" \
41 " -o offset Time offset, microseconds\n" \
42 " -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)\n" \
43 " (positive values make the system clock run fast)\n" \
44 " -t tick Microseconds per tick, usually 10000\n" \
47 #define ar_trivial_usage \
48 "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
49 #define ar_full_usage \
50 "Extract or list FILES from an ar archive" \
52 " -o Preserve original dates\n" \
53 " -p Extract to stdout\n" \
58 #define arp_trivial_usage \
60 "[-vn] [-H type] [-i if] -a [hostname]\n" \
61 "[-v] [-i if] -d hostname [pub]\n" \
62 "[-v] [-H type] [-i if] -s hostname hw_addr [temp]\n" \
63 "[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \
64 "[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n"
65 #define arp_full_usage \
66 "Manipulate the system ARP cache" \
68 "\n -a Display (all) hosts" \
69 "\n -s Set a new ARP entry" \
70 "\n -d Delete a specified entry" \
72 "\n -n Don't resolve names" \
73 "\n -i if Specify network interface (e.g. eth0)" \
74 "\n -D Read <hwaddr> from given device" \
75 "\n -A, -p Specify protocol family" \
76 "\n -H hwtype Specify hardware address type"
78 #define arping_trivial_usage \
79 "[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target"
80 #define arping_full_usage \
81 "Ping hosts by ARP requests/replies" \
83 " -f Quit on first ARP reply\n" \
85 " -b Keep broadcasting, don't go unicast\n" \
86 " -D Duplicated address detection mode\n" \
87 " -U Unsolicited ARP mode, update your neighbours\n" \
88 " -A ARP answer mode, update your neighbours\n" \
89 " -c count Stop after sending count ARP request packets\n" \
90 " -w timeout Time to wait for ARP reply, in seconds\n" \
91 " -i device Outgoing interface name, default is eth0\n" \
92 " -s sender Set specific sender IP address\n" \
93 " target Target IP address of ARP request"
95 #define ash_trivial_usage \
97 "or: ash -c command [args]..."
98 #define ash_full_usage \
99 "The ash shell (command interpreter)"
101 #define awk_trivial_usage \
102 "[OPTION]... [program-text] [FILE ...]"
103 #define awk_full_usage \
105 " -v var=val Assign value 'val' to variable 'var'\n" \
106 " -F sep Use 'sep' as field separator\n" \
107 " -f progname Read program source from file 'progname'"
109 #define basename_trivial_usage \
111 #define basename_full_usage \
112 "Strip directory path and suffixes from FILE.\n" \
113 "If specified, also remove any trailing SUFFIX."
114 #define basename_example_usage \
115 "$ basename /usr/local/bin/foo\n" \
117 "$ basename /usr/local/bin/\n" \
119 "$ basename /foo/bar.txt .txt\n" \
122 #define bunzip2_trivial_usage \
124 #define bunzip2_full_usage \
125 "Uncompress FILE (or standard input if FILE is '-' or omitted)" \
127 " -c Write output to standard output\n" \
130 #define busybox_notes_usage \
133 #define bzcat_trivial_usage \
135 #define bzcat_full_usage \
136 "Uncompress to stdout"
138 #define unlzma_trivial_usage \
140 #define unlzma_full_usage \
141 "Uncompress FILE (or standard input if FILE is '-' or omitted)" \
143 " -c Write output to standard output\n" \
146 #define lzmacat_trivial_usage \
148 #define lzmacat_full_usage \
149 "Uncompress to stdout"
151 #define cal_trivial_usage \
152 "[-jy] [[month] year]"
153 #define cal_full_usage \
154 "Display a calendar" \
156 "\n -j Use julian dates" \
157 "\n -y Display the entire year"
159 #define cat_trivial_usage \
161 #define cat_full_usage \
162 "Concatenate FILE(s) and print them to stdout" \
164 "\n -u Ignored since unbuffered i/o is always used"
165 #define cat_example_usage \
166 "$ cat /proc/uptime\n" \
169 #define catv_trivial_usage \
171 #define catv_full_usage \
172 "Display nonprinting characters as ^x or M-x" \
174 " -e End each line with $\n" \
175 " -t Show tabs as ^I\n" \
176 " -v Don't use ^x or M-x escapes"
177 #define chattr_trivial_usage \
178 "[-R] [-+=AacDdijsStTu] [-v version] files..."
179 #define chattr_full_usage \
180 "Change file attributes on an ext2 fs\n\n" \
182 " - Remove attributes\n" \
183 " + Add attributes\n" \
184 " = Set attributes\n" \
186 " A Don't track atime\n" \
187 " a Append mode only\n" \
188 " c Enable compress\n" \
189 " D Write dir contents synchronously\n" \
190 " d Do not backup with dump\n" \
191 " i Cannot be modified (immutable)\n" \
192 " j Write all data to journal first\n" \
193 " s Zero disk storage when deleted\n" \
194 " S Write file contents synchronously\n" \
195 " t Disable tail-merging of partial blocks with other files\n" \
196 " u Allow file to be undeleted\n" \
198 " -R Recursively list subdirectories\n" \
199 " -v Set the file's version/generation number"
201 #define chcon_trivial_usage \
202 "[OPTIONS] CONTEXT FILE...\n" \
203 " chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE...\n" \
204 " chcon [OPTIONS] --reference=RFILE FILE...\n"
205 #define chcon_full_usage \
206 "Change the security context of each FILE to CONTEXT\n" \
207 "\n -v, --verbose Verbose" \
208 "\n -c, --changes Report changes made" \
209 "\n -h, --no-dereference Affect symlinks instead of their targets" \
210 "\n -f, --silent, --quiet Suppress most error messages" \
211 "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
212 "\n -u, --user=USER Set user USER in the target security context" \
213 "\n -r, --role=ROLE Set role ROLE in the target security context" \
214 "\n -t, --type=TYPE Set type TYPE in the target security context" \
215 "\n -l, --range=RANGE Set range RANGE in the target security context" \
216 "\n -R, --recursive Recurse subdirectories" \
218 #define chmod_trivial_usage \
219 "[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
220 #define chmod_full_usage \
221 "Each MODE is one or more of the letters ugoa, one of the\n" \
222 "symbols +-= and one or more of the letters rwxst" \
224 "\n -R Changes files and directories recursively" \
226 "\n -c List changed files" \
227 "\n -v List all files" \
228 "\n -f Hide errors" \
230 #define chmod_example_usage \
231 "$ ls -l /tmp/foo\n" \
232 "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
233 "$ chmod u+x /tmp/foo\n" \
234 "$ ls -l /tmp/foo\n" \
235 "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
236 "$ chmod 444 /tmp/foo\n" \
237 "$ ls -l /tmp/foo\n" \
238 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
240 #define chgrp_trivial_usage \
241 "[-RhLHP"USE_DESKTOP("cvf")"]... GROUP FILE..."
242 #define chgrp_full_usage \
243 "Change the group membership of each FILE to GROUP" \
245 "\n -R Recurse directories" \
246 "\n -h Affect symlinks instead of symlink targets" \
247 "\n -L Traverse all symlinks to directories" \
248 "\n -H Traverse symlinks on command line only" \
249 "\n -P Do not traverse symlinks (default)" \
251 "\n -c List changed files" \
253 "\n -f Hide errors" \
255 #define chgrp_example_usage \
256 "$ ls -l /tmp/foo\n" \
257 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
258 "$ chgrp root /tmp/foo\n" \
259 "$ ls -l /tmp/foo\n" \
260 "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
262 #define chown_trivial_usage \
263 "[-RhLHP"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
264 #define chown_full_usage \
265 "Change the owner and/or group of each FILE to OWNER and/or GROUP" \
267 "\n -R Recurse directories" \
268 "\n -h Affect symlinks instead of symlink targets" \
269 "\n -L Traverse all symlinks to directories" \
270 "\n -H Traverse symlinks on command line only" \
271 "\n -P Do not traverse symlinks (default)" \
273 "\n -c List changed files" \
274 "\n -v List all files" \
275 "\n -f Hide errors" \
277 #define chown_example_usage \
278 "$ ls -l /tmp/foo\n" \
279 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
280 "$ chown root /tmp/foo\n" \
281 "$ ls -l /tmp/foo\n" \
282 "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
283 "$ chown root.root /tmp/foo\n" \
285 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
287 #define chpst_trivial_usage \
288 "[-vP012] [-u user[:group]] [-U user[:group]] [-e dir] " \
289 "[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \
290 "[-p processes] [-f bytes] [-c bytes] prog args"
291 #define chpst_full_usage \
292 "Change the process state and run specified program" \
294 " -u user[:grp] Set uid and gid\n" \
295 " -U user[:grp] Set environment variables UID and GID\n" \
296 " -e dir Set environment variables as specified by files\n" \
297 " in the directory: file=1st_line_of_file\n" \
298 " -/ dir Chroot to dir\n" \
299 " -n inc Add inc to nice value\n" \
300 " -m bytes Limit data segment, stack segment, locked physical pages,\n" \
301 " and total of all segment per process to bytes bytes each\n" \
302 " -d bytes Limit data segment\n" \
303 " -o n Limit the number of open file descriptors per process to n\n" \
304 " -p n Limit number of processes per uid to n\n" \
305 " -f bytes Limit output file size to bytes bytes\n" \
306 " -c bytes Limit core file size to bytes bytes\n" \
308 " -P Run prog in a new process group\n" \
309 " -0 Close standard input\n" \
310 " -1 Close standard output\n" \
311 " -2 Close standard error"
312 #define setuidgid_trivial_usage \
314 #define setuidgid_full_usage \
315 "Set uid and gid to account's uid and gid, removing all supplementary\n" \
316 "groups, then run prog"
317 #define envuidgid_trivial_usage \
319 #define envuidgid_full_usage \
320 "Set $UID to account's uid and $GID to account's gid, then run prog"
321 #define envdir_trivial_usage \
323 #define envdir_full_usage \
324 "Set various environment variables as specified by files\n" \
325 "in the directory dir, then run prog"
326 #define softlimit_trivial_usage \
327 "[-a allbytes] [-c corebytes] [-d databytes] [-f filebytes] " \
328 "[-l lockbytes] [-m membytes] [-o openfiles] [-p processes] " \
329 "[-r residentbytes] [-s stackbytes] [-t cpusecs] prog args"
330 #define softlimit_full_usage \
331 "Set soft resource limits, then run prog" \
333 " -m n Same as -d n -s n -l n -a n\n" \
334 " -d n Limit the data segment per process to n bytes\n" \
335 " -s n Limit the stack segment per process to n bytes\n" \
336 " -l n Limit the locked physical pages per process to n bytes\n" \
337 " -a n Limit the total of all segments per process to n bytes\n" \
338 " -o n Limit the number of open file descriptors per process to n\n" \
339 " -p n Limit the number of processes per uid to n\n" \
340 "Options controlling file sizes:\n" \
341 " -f n Limit output file sizes to n bytes\n" \
342 " -c n Limit core file sizes to n bytes\n" \
343 "Efficiency opts:\n" \
344 " -r n Limit the resident set size to n bytes. This limit is not\n" \
345 " enforced unless physical memory is full\n" \
346 " -t n Limit the CPU time to n seconds. This limit is not enforced\n" \
347 " except that the process receives a SIGXCPU signal after n seconds\n" \
349 "Some options may have no effect on some operating systems\n" \
350 "n may be =, indicating that soft limit should be set equal to hard limit"
352 #define chroot_trivial_usage \
353 "NEWROOT [COMMAND...]"
354 #define chroot_full_usage \
355 "Run COMMAND with root directory set to NEWROOT"
356 #define chroot_example_usage \
357 "$ ls -l /bin/ls\n" \
358 "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
359 "# mount /dev/hdc1 /mnt -t minix\n" \
361 "# ls -l /bin/ls\n" \
362 "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
364 #define chvt_trivial_usage \
366 #define chvt_full_usage \
367 "Change the foreground virtual terminal to /dev/ttyN"
369 #define cksum_trivial_usage \
371 #define cksum_full_usage \
372 "Calculate the CRC32 checksums of FILES"
374 #define clear_trivial_usage \
376 #define clear_full_usage \
379 #define cmp_trivial_usage \
380 "[-l] [-s] FILE1 [FILE2" USE_DESKTOP(" [SKIP1 [SKIP2]") "]]"
381 #define cmp_full_usage \
382 "Compares FILE1 vs stdin if FILE2 is not specified" \
384 " -l Write the byte numbers (decimal) and values (octal)\n" \
385 " for all differing bytes\n" \
388 #define comm_trivial_usage \
390 #define comm_full_usage \
391 "Compare FILE1 to FILE2, or to stdin if - is specified" \
393 " -1 Suppress lines unique to FILE1\n" \
394 " -2 Suppress lines unique to FILE2\n" \
395 " -3 Suppress lines common to both files"
397 #define bbconfig_trivial_usage \
399 #define bbconfig_full_usage \
400 "Print the config file which built busybox"
402 #define bbsh_trivial_usage \
404 "or: bbsh -c command [args]..."
405 #define bbsh_full_usage \
406 "The bbsh shell (command interpreter)"
408 #define chrt_trivial_usage \
409 "[OPTION]... [prio] [pid | command [arg]...]"
410 #define chrt_full_usage \
411 "manipulate real-time attributes of a process" \
413 " -p operate on pid\n" \
414 " -r set scheduling policy to SCHED_RR\n" \
415 " -f set scheduling policy to SCHED_FIFO\n" \
416 " -o set scheduling policy to SCHED_OTHER\n" \
417 " -m show min and max priorities"
419 #define chrt_example_usage \
420 "$ chrt -r 4 sleep 900 ; x=$!\n" \
421 "$ chrt -f -p 3 $x\n" \
422 "You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
424 #define cp_trivial_usage \
425 "[OPTION]... SOURCE DEST"
426 #define cp_full_usage \
427 "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY" \
429 "\n -a Same as -dpR" \
431 "\n -c Preserves security context" \
433 "\n -d,-P Preserve links" \
434 "\n -H,-L Dereference all symlinks (default)" \
435 "\n -p Preserve file attributes if possible" \
436 "\n -f Force overwrite" \
437 "\n -i Prompt before overwrite" \
438 "\n -R,-r Recurse directories" \
439 "\n -l,-s Create (sym)links"
441 #define cpio_trivial_usage \
442 "-[dimtuv][F cpiofile]"
443 #define cpio_full_usage \
444 "Extract or list files from a cpio archive\n" \
445 "Main operation mode:\n" \
446 " d Make leading directories\n" \
448 " m Preserve mtime\n" \
451 " u Unconditional overwrite\n" \
454 #define crond_trivial_usage \
455 "-d[#] -c <crondir> -f -b"
456 #define crond_full_usage \
457 " -d [#] -l [#] -S -L logfile -f -b -c dir\n" \
458 " -d num Debug level\n" \
459 " -l num Log level (8 - default)\n" \
460 " -S Log to syslogd (default)\n" \
461 " -L file Log to file\n" \
462 " -f Run in foreground\n" \
463 " -b Run in background (default)\n" \
464 " -c dir Working dir"
466 #define crontab_trivial_usage \
467 "[-c dir] {file|-}|[-u|-l|-e|-d user]"
468 #define crontab_full_usage \
469 " File <opts> replace crontab from file\n" \
470 " - <opts> replace crontab from stdin\n" \
471 " -u user specify user\n" \
472 " -l [user] list crontab for user\n" \
473 " -e [user] edit crontab for user\n" \
474 " -d [user] delete crontab for user\n" \
475 " -c dir specify crontab directory"
478 #define cut_trivial_usage \
479 "[OPTION]... [FILE]..."
480 #define cut_full_usage \
481 "Print selected fields from each input FILE to standard output" \
483 " -b LIST Output only bytes from LIST\n" \
484 " -c LIST Output only characters from LIST\n" \
485 " -d CHAR Use CHAR instead of tab as the field delimiter\n" \
486 " -s Output only the lines containing delimiter\n" \
487 " -f N Print only these fields\n" \
489 #define cut_example_usage \
490 "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
492 "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
495 #define date_trivial_usage \
496 "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
497 #define date_full_usage \
498 "Display current time in the given FORMAT, or set system date" \
500 " -R Outputs RFC-822 compliant date string\n" \
501 " -d STRING Displays time described by STRING, not 'now'\n" \
502 USE_FEATURE_DATE_ISOFMT( \
503 " -I[TIMESPEC] Outputs an ISO-8601 compliant date/time string\n" \
504 " TIMESPEC='date' (or missing) for date only,\n" \
505 " 'hours', 'minutes', or 'seconds' for date and,\n" \
506 " time to the indicated precision\n" \
507 " -D hint Use 'hint' as date format, via strptime()\n" \
509 " -s Sets time described by STRING\n" \
510 " -r FILE Displays the last modification time of FILE\n" \
511 " -u Prints or sets Coordinated Universal Time"
512 #define date_example_usage \
514 "Wed Apr 12 18:52:41 MDT 2000\n"
516 #define dc_trivial_usage \
518 #define dc_full_usage \
519 "This is a Tiny RPN calculator that understands the\n" \
520 "following operations: +, add, -, sub, *, mul, /, div, %, mod, " \
521 "**, exp, and, or, not, eor.\n" \
522 "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16." \
524 "p - Prints the value on the top of the stack, without altering the stack\n" \
525 "f - Prints the entire contents of the stack without altering anything\n" \
526 "o - Pops the value off the top of the stack and uses it to set the output radix\n" \
527 " Only 10 and 16 are supported"
528 #define dc_example_usage \
531 "$ dc 8 8 \\* 2 2 + / p\n" \
537 "$ echo 72 9 div 8 mul p | dc\n" \
540 #define dd_trivial_usage \
541 "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
542 " [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]")
543 #define dd_full_usage \
544 "Copy a file with converting and formatting" \
546 " if=FILE Read from FILE instead of stdin\n" \
547 " of=FILE Write to FILE instead of stdout\n" \
548 " bs=N Read and write N bytes at a time\n" \
549 USE_FEATURE_DD_IBS_OBS( \
550 " ibs=N Read N bytes at a time\n") \
551 USE_FEATURE_DD_IBS_OBS( \
552 " obs=N Write N bytes at a time\n") \
553 " count=N Copy only N input blocks\n" \
554 " skip=N Skip N input blocks\n" \
555 " seek=N Skip N output blocks\n" \
556 USE_FEATURE_DD_IBS_OBS( \
557 " conv=notrunc Don't truncate output file\n" \
558 " conv=noerror Continue after read errors\n" \
559 " conv=sync Pad blocks with zeros\n") \
561 "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
562 "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)"
563 #define dd_example_usage \
564 "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
568 #define deallocvt_trivial_usage \
570 #define deallocvt_full_usage \
571 "Deallocate unused virtual terminal /dev/ttyN"
573 #define delgroup_trivial_usage \
575 #define delgroup_full_usage \
576 "Delete group GROUP from the system"
578 #define deluser_trivial_usage \
580 #define deluser_full_usage \
581 "Delete user USER from the system"
583 #define devfsd_trivial_usage \
585 USE_DEVFSD_FG_NP("[-fg][-np]" )
586 #define devfsd_full_usage \
587 "Manage devfs permissions and old device name symlinks" \
589 "\n mntpnt The mount point where devfs is mounted" \
590 "\n -v Print the protocol version numbers for devfsd" \
591 "\n and the kernel-side protocol version and exits" \
593 "\n -fg Run the daemon in the foreground" \
594 "\n -np Exit after parsing the configuration file" \
595 "\n and processing synthetic REGISTER events," \
596 "\n do not poll for events")
598 #define df_trivial_usage \
599 "[-" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILESYSTEM ...]"
600 #define df_full_usage \
601 "Print the filesystem space used and space available" \
603 USE_FEATURE_HUMAN_READABLE( \
604 "\n -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \
605 " -m Print sizes in megabytes\n" \
606 " -k Print sizes in kilobytes(default)") \
607 SKIP_FEATURE_HUMAN_READABLE( \
609 #define df_example_usage \
611 "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
612 "/dev/sda3 8690864 8553540 137324 98% /\n" \
613 "/dev/sda1 64216 36364 27852 57% /boot\n" \
615 "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
616 "/dev/sda3 8690864 8553540 137324 98% /\n"
618 #define dhcprelay_trivial_usage \
619 "[client_device_list] [server_device]"
620 #define dhcprelay_full_usage \
621 "Relay dhcp requests from client devices to server device"
623 #define dhcprelay_trivial_usage \
624 "[client_device_list] [server_device]"
625 #define dhcprelay_full_usage \
626 "Relay dhcp requests from client devices to server device"
628 #define diff_trivial_usage \
629 "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
630 #define diff_full_usage \
631 "Compare files line by line and output the differences between them.\n" \
632 "This diff implementation only supports unified diffs." \
634 " -a Treat all files as text\n" \
635 " -b Ignore changes in the amount of whitespace\n" \
636 " -d Try hard to find a smaller set of changes\n" \
637 " -i Ignore case differences\n" \
638 " -L Use LABEL instead of the filename in the unified header\n" \
639 " -N Treat absent files as empty\n" \
640 " -q Output only whether files differ\n" \
641 " -r Recursively compare subdirectories\n" \
642 " -S Start with FILE when comparing directories\n" \
643 " -T Make tabs line up by prefixing a tab when necessary\n" \
644 " -s Report when two files are the same\n" \
645 " -t Expand tabs to spaces in output\n" \
646 " -U Output LINES lines of context\n" \
647 " -w Ignore all whitespace"
649 #define dirname_trivial_usage \
651 #define dirname_full_usage \
652 "Strip non-directory suffix from FILENAME"
653 #define dirname_example_usage \
654 "$ dirname /tmp/foo\n" \
656 "$ dirname /tmp/foo/\n" \
659 #define dmesg_trivial_usage \
660 "[-c] [-n LEVEL] [-s SIZE]"
661 #define dmesg_full_usage \
662 "Print or control the kernel ring buffer" \
664 " -c Clears the ring buffer's contents after printing\n" \
665 " -n LEVEL Sets console logging level\n" \
666 " -s SIZE Use a buffer of size SIZE"
668 #define dnsd_trivial_usage \
669 "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]"
670 #define dnsd_full_usage \
671 "Small and static DNS server daemon" \
673 " -c Config filename\n" \
674 " -t TTL in seconds\n" \
675 " -p Listening port\n" \
676 " -i Listening ip (default all)\n" \
679 #define dos2unix_trivial_usage \
681 #define dos2unix_full_usage \
682 "Convert FILE from dos format to unix format. When no option\n" \
683 "is given, the input is converted to the opposite output format.\n" \
684 "When no file is given, use stdin for input and stdout for output." \
686 " -u Output will be in UNIX format\n" \
687 " -d Output will be in DOS format"
689 #define dpkg_trivial_usage \
690 "[-ilCPru] [-F option] package_name"
691 #define dpkg_full_usage \
692 "Install, remove and manage Debian packages" \
694 " -i Install the package\n" \
695 " -l List of installed packages\n" \
696 " -C Configure an unpackaged package\n" \
697 " -F depends Ignore dependency problems\n" \
698 " -P Purge all files of a package\n" \
699 " -r Remove all but the configuration files for a package\n" \
700 " -u Unpack a package, but don't configure it"
702 #define dpkg_deb_trivial_usage \
703 "[-cefxX] FILE [argument]"
704 #define dpkg_deb_full_usage \
705 "Perform actions on Debian packages (.debs)" \
707 " -c List contents of filesystem tree\n" \
708 " -e Extract control files to [argument] directory\n" \
709 " -f Display control field name starting with [argument]\n" \
710 " -x Extract packages filesystem tree to directory\n" \
711 " -X Verbose extract"
712 #define dpkg_deb_example_usage \
713 "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
715 #define du_trivial_usage \
716 "[-aHLdclsx" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
717 #define du_full_usage \
718 "Summarize disk space used for each FILE and/or directory.\n" \
719 "Disk space is printed in units of " \
720 USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
721 SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
724 " -a Show sizes of files in addition to directories\n" \
725 " -H Follow symlinks that are FILE command line args\n" \
726 " -L Follow all symlinks encountered\n" \
727 " -d N Limit output to directories (and files with -a) of depth < N\n" \
728 " -c Output a grand total\n" \
729 " -l Count sizes many times if hard linked\n" \
730 " -s Display only a total for each argument\n" \
731 " -x Skip directories on different filesystems\n" \
732 USE_FEATURE_HUMAN_READABLE( \
733 " -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \
734 " -m Print sizes in megabytes\n" \
736 " -k Print sizes in kilobytes" \
737 USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("(default)")
738 #define du_example_usage \
741 "12 ./kernel-patches/CVS\n" \
742 "80 ./kernel-patches\n" \
745 "12 ./scripts/CVS\n" \
751 #define dumpkmap_trivial_usage \
753 #define dumpkmap_full_usage \
754 "Print out a binary keyboard translation table to standard output"
755 #define dumpkmap_example_usage \
756 "$ dumpkmap > keymap\n"
758 #define dumpleases_trivial_usage \
759 "[-r|-a] [-f LEASEFILE]"
760 #define dumpleases_full_usage \
761 "Display DHCP leases granted by udhcpd" \
763 " -f, --file=FILENAME Leases file to load\n" \
764 " -r, --remaining Interpret lease times as time remaining\n" \
765 " -a, --absolute Interpret lease times as expire time"
767 #define e2fsck_trivial_usage \
768 "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
769 "[-I inode_buffer_blocks] [-P process_inode_size] " \
770 "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
771 "[-E extended-options] device"
772 #define e2fsck_full_usage \
773 "Check ext2/ext3 file system" \
775 " -p Automatic repair (no questions)\n" \
776 " -n Make no changes to the filesystem\n" \
777 " -y Assume 'yes' to all questions\n" \
778 " -c Check for bad blocks and add them to the badblock list\n" \
779 " -f Force checking even if filesystem is marked clean\n" \
781 " -b superblock Use alternative superblock\n" \
782 " -B blocksize Force blocksize when looking for superblock\n" \
783 " -j journal Set location of the external journal\n" \
784 " -l file Add to badblocks list\n" \
785 " -L file Set badblocks list"
787 #define echo_trivial_usage \
788 USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG ...]"
789 #define echo_full_usage \
790 "Print the specified ARGs to stdout" \
791 USE_FEATURE_FANCY_ECHO( \
793 " -n Suppress trailing newline\n" \
794 " -e Interpret backslash-escaped characters (i.e., \\t=tab)\n" \
795 " -E Disable interpretation of backslash-escaped characters" \
797 #define echo_example_usage \
798 "$ echo \"Erik is cool\"\n" \
800 USE_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
804 "$ echo \"Erik\\nis\\ncool\"\n" \
805 "Erik\\nis\\ncool\n")
807 #define eject_trivial_usage \
809 #define eject_full_usage \
810 "Eject specified DEVICE (or default /dev/cdrom)" \
813 " -T Open/close tray (toggle)"
815 #define ed_trivial_usage ""
816 #define ed_full_usage ""
818 #define env_trivial_usage \
819 "[-iu] [-] [name=value]... [command]"
820 #define env_full_usage \
821 "Print the current environment or run a program after setting\n" \
822 "up the specified environment" \
824 " -, -i Start with an empty environment\n" \
825 " -u Remove variable from the environment"
827 #define ether_wake_trivial_usage \
828 "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
829 #define ether_wake_full_usage \
830 "Send a magic packet to wake up sleeping machines.\n" \
831 "MAC must be a station address (00:11:22:33:44:55) or\n" \
832 "a hostname with a known 'ethers' entry." \
834 " -b Send wake-up packet to the broadcast address\n" \
835 " -i iface Use interface ifname instead of the default \"eth0\"\n" \
836 " -p pass Append the four or six byte password PW to the packet"
838 #define expr_trivial_usage \
840 #define expr_full_usage \
841 "Print the value of EXPRESSION to standard output.\n\n" \
842 "EXPRESSION may be:\n" \
843 " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
844 " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
845 " ARG1 < ARG2 ARG1 is less than ARG2\n" \
846 " ARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \
847 " ARG1 = ARG2 ARG1 is equal to ARG2\n" \
848 " ARG1 != ARG2 ARG1 is unequal to ARG2\n" \
849 " ARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \
850 " ARG1 > ARG2 ARG1 is greater than ARG2\n" \
851 " ARG1 + ARG2 Sum of ARG1 and ARG2\n" \
852 " ARG1 - ARG2 Difference of ARG1 and ARG2\n" \
853 " ARG1 * ARG2 Product of ARG1 and ARG2\n" \
854 " ARG1 / ARG2 Quotient of ARG1 divided by ARG2\n" \
855 " ARG1 % ARG2 Remainder of ARG1 divided by ARG2\n" \
856 " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
857 " match STRING REGEXP Same as STRING : REGEXP\n" \
858 " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
859 " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
860 " length STRING Length of STRING\n" \
861 " quote TOKEN Interpret TOKEN as a string, even if\n" \
862 " it is a keyword like 'match' or an\n" \
863 " operator like '/'\n" \
864 " (EXPRESSION) Value of EXPRESSION\n\n" \
865 "Beware that many operators need to be escaped or quoted for shells.\n" \
866 "Comparisons are arithmetic if both ARGs are numbers, else\n" \
867 "lexicographical. Pattern matches return the string matched between\n" \
868 "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
869 "of characters matched or 0."
871 #define fakeidentd_trivial_usage \
872 "[-fiw] [-b ADDR] [STRING]"
873 #define fakeidentd_full_usage \
874 "Provide fake ident (auth) service" \
876 "\n -f Run in foreground" \
878 "\n -w Inetd 'wait' mode" \
879 "\n -b ADDR Bind to specified address" \
880 "\n STRING Ident answer string (default is 'nobody')"
882 #define false_trivial_usage \
884 #define false_full_usage \
885 "Return an exit code of FALSE (1)"
886 #define false_example_usage \
891 #define fbset_trivial_usage \
893 #define fbset_full_usage \
894 "Show and modify frame buffer settings"
895 #define fbset_example_usage \
897 "mode \"1024x768-76\"\n" \
898 " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
899 " geometry 1024 768 1024 768 16\n" \
900 " timings 12714 128 32 16 4 128 4\n" \
902 " rgba 5/11,6/5,5/0,0/0\n" \
905 #define fdflush_trivial_usage \
907 #define fdflush_full_usage \
908 "Force floppy disk drive to detect disk change"
910 #define fdformat_trivial_usage \
912 #define fdformat_full_usage \
913 "Format floppy disk" \
915 " -n Don't verify after format"
917 #define fdisk_trivial_usage \
918 "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
919 #define fdisk_full_usage \
920 "Change partition table" \
922 " -l List partition table(s)\n" \
923 " -u Give Start and End in sector (instead of cylinder) units\n" \
924 " -s PARTITION Give partition size(s) in blocks\n" \
925 " -b 2048 (for certain MO disks) use 2048-byte sectors\n" \
926 " -C CYLINDERS Set the number of cylinders\n" \
927 " -H HEADS Set the number of heads\n" \
928 " -S SECTORS Set the number of sectors\n" \
929 " -v Give fdisk version"
931 #define find_trivial_usage \
932 "[PATH...] [EXPRESSION]"
933 #define find_full_usage \
934 "Search for files in a directory hierarchy. The default PATH is\n" \
935 "the current directory; default EXPRESSION is '-print'\n" \
936 "\nEXPRESSION may consist of:\n" \
937 " -follow Dereference symlinks\n" \
938 " -name PATTERN File name (leading directories removed) matches PATTERN\n" \
939 " -print Print (default and assumed)" \
940 USE_FEATURE_FIND_PRINT0( \
941 "\n -print0 Delimit output with null characters rather than" \
943 ) USE_FEATURE_FIND_TYPE( \
944 "\n -type X Filetype matches X (where X is one of: f,d,l,b,c,...)" \
945 ) USE_FEATURE_FIND_PERM( \
946 "\n -perm PERMS Permissions match any of (+NNN); all of (-NNN);" \
947 "\n or exactly (NNN)" \
948 ) USE_FEATURE_FIND_MTIME( \
949 "\n -mtime DAYS Modified time is greater than (+N); less than (-N);" \
950 "\n Or exactly (N) days" \
951 ) USE_FEATURE_FIND_MMIN( \
952 "\n -mmin MINS Modified time is greater than (+N); less than (-N);" \
953 "\n or exactly (N) minutes" \
954 ) USE_FEATURE_FIND_NEWER( \
955 "\n -newer FILE Modified time is more recent than FILE's" \
956 ) USE_FEATURE_FIND_INUM( \
957 "\n -inum N File has inode number N" \
958 ) USE_FEATURE_FIND_EXEC( \
959 "\n -exec CMD Execute CMD with all instances of {} replaced by the" \
960 "\n files matching EXPRESSION" \
961 ) USE_FEATURE_FIND_SIZE( \
962 "\n -size N File size is N" \
963 ) USE_FEATURE_FIND_PRUNE( \
964 "\n -prune Stop traversing current subtree" \
965 ) USE_FEATURE_FIND_PAREN( \
969 #define find_example_usage \
970 "$ find / -name passwd\n" \
973 #define fold_trivial_usage \
974 "[-bs] [-w WIDTH] [FILE]"
975 #define fold_full_usage \
976 "Wrap input lines in each FILE (standard input by default), writing to\n" \
979 " -b Count bytes rather than columns\n" \
980 " -s Break at spaces\n" \
981 " -w Use WIDTH columns instead of 80"
983 #define free_trivial_usage \
985 #define free_full_usage \
986 "Display the amount of free and used system memory"
987 #define free_example_usage \
989 " total used free shared buffers\n" \
990 " Mem: 257628 248724 8904 59644 93124\n" \
991 " Swap: 128516 8404 120112\n" \
992 "Total: 386144 257128 129016\n" \
994 #define freeramdisk_trivial_usage \
996 #define freeramdisk_full_usage \
997 "Free all memory used by the specified ramdisk"
998 #define freeramdisk_example_usage \
999 "$ freeramdisk /dev/ram2\n"
1001 #define fsck_trivial_usage \
1002 "[-ANPRTV] [ -C fd ] [-t fstype] [fs-options] [filesys ...]"
1003 #define fsck_full_usage \
1004 "Check and repair filesystems" \
1006 " -A Walk /etc/fstab and check all filesystems\n" \
1007 " -N Don't execute, just show what would be done\n" \
1008 " -P When using -A, check filesystems in parallel\n" \
1009 " -R When using -A, skip the root filesystem\n" \
1010 " -T Don't show title on startup\n" \
1012 " -C n Write status information to specified filedescriptor\n" \
1013 " -t type List of filesystem types to check"
1015 #define fsck_minix_trivial_usage \
1016 "[-larvsmf] /dev/name"
1017 #define fsck_minix_full_usage \
1018 "Perform a consistency check for MINIX filesystems" \
1020 " -l Lists all filenames\n" \
1021 " -r Perform interactive repairs\n" \
1022 " -a Perform automatic repairs\n" \
1024 " -s Outputs super-block information\n" \
1025 " -m Activates MINIX-like \"mode not cleared\" warnings\n" \
1026 " -f Force file system check"
1028 #define ftpget_trivial_usage \
1029 "[options] remote-host local-file remote-file"
1030 #define ftpget_full_usage \
1031 "Retrieve a remote file via FTP" \
1033 " -c, --continue Continue a previous transfer\n" \
1034 " -v, --verbose Verbose\n" \
1035 " -u, --username Username to be used\n" \
1036 " -p, --password Password to be used\n" \
1037 " -P, --port Port number to be used"
1039 #define ftpput_trivial_usage \
1040 "[options] remote-host remote-file local-file"
1041 #define ftpput_full_usage \
1042 "Store a local file on a remote machine via FTP" \
1044 " -v, --verbose Verbose\n" \
1045 " -u, --username Username to be used\n" \
1046 " -p, --password Password to be used\n" \
1047 " -P, --port Port number to be used"
1049 #define fuser_trivial_usage \
1050 "[options] file OR port/proto"
1051 #define fuser_full_usage \
1053 " -m Show all processes on the same mounted fs\n" \
1054 " -k Kill all processes that match\n" \
1055 " -s Don't print or kill anything\n" \
1056 " -4 When using port/proto only search IPv4 space\n" \
1057 " -6 When using port/proto only search IPv6 space\n" \
1058 " -SIGNAL When used with -k, this signal will be used to kill"
1060 #define getenforce_trivial_usage
1061 #define getenforce_full_usage
1063 #define getopt_trivial_usage \
1065 #define getopt_full_usage \
1066 "Parse command options\n" \
1067 " -a, --alternative Allow long options starting with single -\n" \
1068 " -l, --longoptions=longopts Long options to be recognized\n" \
1069 " -n, --name=progname The name under which errors are reported\n" \
1070 " -o, --options=optstring Short options to be recognized\n" \
1071 " -q, --quiet Disable error reporting by getopt(3)\n" \
1072 " -Q, --quiet-output No normal output\n" \
1073 " -s, --shell=shell Set shell quoting conventions\n" \
1074 " -T, --test Test for getopt(1) version\n" \
1075 " -u, --unquoted Do not quote the output"
1076 #define getopt_example_usage \
1077 "$ cat getopt.test\n" \
1079 "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
1080 " -n 'example.busybox' -- \"$@\"`\n" \
1081 "if [ $? != 0 ] ; then exit 1 ; fi\n" \
1082 "eval set -- \"$GETOPT\"\n" \
1083 "while true ; do\n" \
1085 " -a|--a-long) echo \"Option a\" ; shift ;;\n" \
1086 " -b|--b-long) echo \"Option b, argument '$2'\" ; shift 2 ;;\n" \
1088 " case \"$2\" in\n" \
1089 " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \
1090 " *) echo \"Option c, argument '$2'\" ; shift 2 ;;\n" \
1092 " --) shift ; break ;;\n" \
1093 " *) echo \"Internal error!\" ; exit 1 ;;\n" \
1097 #define getsebool_trivial_usage \
1098 "-a or getsebool boolean..."
1099 #define getsebool_full_usage \
1100 " -a Show all SELinux booleans"
1102 #define getty_trivial_usage \
1103 "[OPTIONS]... baud_rate,... line [termtype]"
1104 #define getty_full_usage \
1105 "Open a tty, prompt for a login name, then invoke /bin/login" \
1107 " -h Enable hardware (RTS/CTS) flow control\n" \
1108 " -i Do not display /etc/issue before running login\n" \
1109 " -L Local line, so do not do carrier detect\n" \
1110 " -m Get baud rate from modem's CONNECT status message\n" \
1111 " -w Wait for a CR or LF before sending /etc/issue\n" \
1112 " -n Do not prompt the user for a login name\n" \
1113 " -f issue_file Display issue_file instead of /etc/issue\n" \
1114 " -l login_app Invoke login_app instead of /bin/login\n" \
1115 " -t timeout Terminate after timeout if no username is read\n" \
1116 " -I initstring Sets the init string to send before anything else\n" \
1117 " -H login_host Log login_host into the utmp file as the hostname"
1119 #define grep_trivial_usage \
1123 USE_FEATURE_GREP_EGREP_ALIAS("E") \
1124 USE_FEATURE_GREP_CONTEXT("ABC") \
1125 "] PATTERN [FILEs...]"
1126 #define grep_full_usage \
1127 "Search for PATTERN in each FILE or standard input" \
1129 "\n -H Prefix output lines with filename where match was found" \
1130 "\n -h Suppress the prefixing filename on output" \
1131 "\n -r Recurse subdirectories" \
1132 "\n -i Ignore case distinctions" \
1133 "\n -l List names of files that match" \
1134 "\n -L List names of files that do not match" \
1135 "\n -n Print line number with output lines" \
1136 "\n -q Quiet. Returns 0 if PATTERN was found, 1 otherwise" \
1137 "\n -v Select non-matching lines" \
1138 "\n -s Suppress file open/read error messages" \
1139 "\n -c Only print count of matching lines" \
1140 "\n -f Read PATTERN from file" \
1141 "\n -o Show only the part of a line that matches PATTERN" \
1143 "\n -w Match whole words only") \
1144 "\n -e PATTERN is a regular expression" \
1145 "\n -F PATTERN is a set of newline-separated strings" \
1146 USE_FEATURE_GREP_EGREP_ALIAS( \
1147 "\n -E PATTERN is an extended regular expression") \
1148 USE_FEATURE_GREP_CONTEXT( \
1149 "\n -A Print NUM lines of trailing context" \
1150 "\n -B Print NUM lines of leading context" \
1151 "\n -C Print NUM lines of output context") \
1153 #define grep_example_usage \
1154 "$ grep root /etc/passwd\n" \
1155 "root:x:0:0:root:/root:/bin/bash\n" \
1156 "$ grep ^[rR]oo. /etc/passwd\n" \
1157 "root:x:0:0:root:/root:/bin/bash\n"
1159 #define gunzip_trivial_usage \
1161 #define gunzip_full_usage \
1162 "Uncompress FILE (or standard input if FILE is '-')" \
1164 " -c Write output to standard output\n" \
1165 " -f Force read when source is a terminal\n" \
1166 " -t Test compressed file integrity"
1167 #define gunzip_example_usage \
1168 "$ ls -la /tmp/BusyBox*\n" \
1169 "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
1170 "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
1171 "$ ls -la /tmp/BusyBox*\n" \
1172 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
1174 #define gzip_trivial_usage \
1175 "[OPTION]... [FILE]..."
1176 #define gzip_full_usage \
1177 "Compress FILE(s) with maximum compression.\n" \
1178 "When FILE is '-' or unspecified, reads standard input. Implies -c." \
1180 " -c Write output to standard output instead of FILE.gz\n" \
1181 " -d Decompress\n" \
1182 " -f Force write when destination is a terminal"
1183 #define gzip_example_usage \
1184 "$ ls -la /tmp/busybox*\n" \
1185 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
1186 "$ gzip /tmp/busybox.tar\n" \
1187 "$ ls -la /tmp/busybox*\n" \
1188 "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
1190 #define halt_trivial_usage \
1191 "[-d<delay>] [-n<nosync>] [-f<force>]"
1192 #define halt_full_usage \
1195 " -d Delay interval for halting\n" \
1196 " -n No call to sync()\n" \
1197 " -f Force halt (don't go through init)"
1199 #define hdparm_trivial_usage \
1200 "[options] [device] .."
1201 #define hdparm_full_usage \
1202 USE_FEATURE_HDPARM_GET_IDENTITY( \
1203 "If no device name is specified try to read from stdin.\n\n") \
1205 " -a Get/set fs readahead\n" \
1206 " -A Set drive read-lookahead flag (0/1)\n" \
1207 " -b Get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
1208 " -B Set Advanced Power Management setting (1-255)\n" \
1209 " -c Get/set IDE 32-bit IO setting\n" \
1210 " -C Check IDE power mode status\n" \
1211 USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \
1212 " -d Get/set using_dma flag\n") \
1213 " -D Enable/disable drive defect-mgmt\n" \
1214 " -f Flush buffer cache for device on exit\n" \
1215 " -g Display drive geometry\n" \
1216 " -h Display terse usage information\n" \
1217 USE_FEATURE_HDPARM_GET_IDENTITY( \
1218 " -i Display drive identification\n") \
1219 USE_FEATURE_HDPARM_GET_IDENTITY( \
1220 " -I Detailed/current information directly from drive\n") \
1221 " -k Get/set keep_settings_over_reset flag (0/1)\n" \
1222 " -K Set drive keep_features_over_reset flag (0/1)\n" \
1223 " -L Set drive doorlock (0/1) (removable harddisks only)\n" \
1224 " -m Get/set multiple sector count\n" \
1225 " -n Get/set ignore-write-errors flag (0/1)\n" \
1226 " -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
1227 " -P Set drive prefetch count\n" \
1228 " -q Change next setting quietly\n" \
1229 " -Q Get/set DMA tagged-queuing depth (if supported)\n" \
1230 " -r Get/set readonly flag (DANGEROUS to set)\n" \
1231 USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
1232 " -R Register an IDE interface (DANGEROUS)\n") \
1233 " -S Set standby (spindown) timeout\n" \
1234 " -t Perform device read timings\n" \
1235 " -T Perform cache read timings\n" \
1236 " -u Get/set unmaskirq flag (0/1)\n" \
1237 USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
1238 " -U Un-register an IDE interface (DANGEROUS)\n") \
1239 " -v Defaults; same as -mcudkrag for IDE drives\n" \
1240 " -V Display program version and exit immediately\n" \
1241 USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
1242 " -w Perform device reset (DANGEROUS)\n") \
1243 " -W Set drive write-caching flag (0/1) (DANGEROUS)\n" \
1244 USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
1245 " -x Tristate device for hotswap (0/1) (DANGEROUS)\n") \
1246 " -X Set IDE xfer mode (DANGEROUS)\n" \
1247 " -y Put IDE drive in standby mode\n" \
1248 " -Y Put IDE drive to sleep\n" \
1249 " -Z Disable Seagate auto-powersaving mode\n" \
1250 " -z Re-read partition table"
1252 #define head_trivial_usage \
1253 "[OPTION]... [FILE]..."
1254 #define head_full_usage \
1255 "Print first 10 lines of each FILE to standard output.\n" \
1256 "With more than one FILE, precede each with a header giving the\n" \
1257 "file name. With no FILE, or when FILE is -, read standard input." \
1259 "\n -n NUM Print first NUM lines instead of first 10" \
1260 USE_FEATURE_FANCY_HEAD( \
1261 "\n -c NUM Output the first NUM bytes" \
1262 "\n -q Never output headers giving file names" \
1263 "\n -v Always output headers giving file names")
1264 #define head_example_usage \
1265 "$ head -n 2 /etc/passwd\n" \
1266 "root:x:0:0:root:/root:/bin/bash\n" \
1267 "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
1269 #define hexdump_trivial_usage \
1270 "[-[bcCdefnosvx]] [OPTION] FILE"
1271 #define hexdump_full_usage \
1272 "Display file(s) or standard input in a user specified format" \
1274 " -b One-byte octal display\n" \
1275 " -c One-byte character display\n" \
1276 " -C Canonical hex+ASCII, 16 bytes per line\n" \
1277 " -d Two-byte decimal display\n" \
1278 " -e FORMAT STRING\n" \
1279 " -f FORMAT FILE\n" \
1280 " -n LENGTH Interpret only length bytes of input\n" \
1281 " -o Two-byte octal display\n" \
1282 " -s OFFSET Skip offset bytes\n" \
1283 " -v Display all input data\n" \
1284 " -x Two-byte hexadecimal display"
1286 #define hostid_trivial_usage \
1288 #define hostid_full_usage \
1289 "Print out a unique 32-bit identifier for the machine"
1291 #define hostname_trivial_usage \
1292 "[OPTION] {hostname | -F FILE}"
1293 #define hostname_full_usage \
1294 "Get or set the hostname or DNS domain name. If a hostname is given\n" \
1295 "(or FILE with the -F parameter), the host name will be set." \
1298 " -i Addresses for the hostname\n" \
1299 " -d DNS domain name\n" \
1300 " -f Fully qualified domain name\n" \
1301 " -F FILE Use the contents of FILE to specify the hostname"
1302 #define hostname_example_usage \
1306 #define httpd_trivial_usage \
1307 "[-c <conf file>]" \
1310 USE_FEATURE_HTTPD_SETUID(" [-u user[:grp]]") \
1311 USE_FEATURE_HTTPD_BASIC_AUTH(" [-r <realm>]") \
1312 USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \
1315 #define httpd_full_usage \
1316 "Listen for incoming http server requests" \
1318 " -c FILE Specifies configuration file. (default httpd.conf)\n" \
1319 " -p PORT Server port (default 80)\n" \
1320 " -i Assume that we are started from inetd\n" \
1321 " -f Do not daemonize\n" \
1322 USE_FEATURE_HTTPD_SETUID( \
1323 " -u USER[:GRP] Set uid/gid after binding to port\n") \
1324 USE_FEATURE_HTTPD_BASIC_AUTH( \
1325 " -r REALM Authentication Realm for Basic Authentication\n") \
1326 USE_FEATURE_HTTPD_AUTH_MD5( \
1327 " -m PASS Crypt PASS with md5 algorithm\n") \
1328 " -h HOME Specifies http HOME directory (default ./)\n" \
1329 " -e STRING HTML encode STRING\n" \
1330 " -d STRING URL decode STRING"
1332 #define hwclock_trivial_usage \
1333 "[-r|--show] [-s|--hctosys] [-w|--systohc]" \
1334 " [-l|--localtime] [-u|--utc]" \
1336 #define hwclock_full_usage \
1337 "Query and set a hardware clock (RTC)" \
1339 " -r Read hardware clock and print result\n" \
1340 " -s Set the system time from the hardware clock\n" \
1341 " -w Set the hardware clock to the current system time\n" \
1342 " -u The hardware clock is kept in coordinated universal time\n" \
1343 " -l The hardware clock is kept in local time\n" \
1344 " -f FILE Use the specified clock (e.g. /dev/rtc2)"
1346 #define id_trivial_usage \
1347 "[OPTIONS]... [USERNAME]"
1348 #define id_full_usage \
1349 "Print information for USERNAME or the current user" \
1352 " -Z prints only the security context\n" \
1354 " -g Prints only the group ID\n" \
1355 " -u Prints only the user ID\n" \
1356 " -n Print a name instead of a number\n" \
1357 " -r Prints the real user ID instead of the effective ID"
1358 #define id_example_usage \
1360 "uid=1000(andersen) gid=1000(andersen)\n"
1362 #define ifconfig_trivial_usage \
1363 USE_FEATURE_IFCONFIG_STATUS("[-a]") " <interface> [<address>]"
1364 #define ifconfig_full_usage \
1365 "Configure a network interface" \
1368 " [add <address>[/<prefixlen>]]\n") \
1370 " [del <address>[/<prefixlen>]]\n") \
1371 " [[-]broadcast [<address>]] [[-]pointopoint [<address>]]\n" \
1372 " [netmask <address>] [dstaddr <address>]\n" \
1373 USE_FEATURE_IFCONFIG_SLIP( \
1374 " [outfill <NN>] [keepalive <NN>]\n") \
1375 " " USE_FEATURE_IFCONFIG_HW("[hw ether <address>] ") "[metric <NN>] [mtu <NN>]\n" \
1376 " [[-]trailers] [[-]arp] [[-]allmulti]\n" \
1377 " [multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]\n" \
1378 USE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
1379 " [mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \
1382 #define ifup_trivial_usage \
1383 "<-ahinv> <ifaces...>"
1384 #define ifup_full_usage \
1386 " -a De/configure all interfaces automatically\n" \
1387 " -i FILE Use FILE for interface definitions\n" \
1388 " -n Print out what would happen, but don't do it\n" \
1389 " (note that this option doesn't disable mappings)\n" \
1390 " -v Print out what would happen before doing it\n" \
1391 " -m Don't run any mappings\n" \
1392 " -f Force de/configuration"
1394 #define ifdown_trivial_usage \
1395 "<-ahinv> <ifaces...>"
1396 #define ifdown_full_usage \
1398 " -a De/configure all interfaces automatically\n" \
1399 " -i FILE Use FILE for interface definitions\n" \
1400 " -n Print out what would happen, but don't do it\n" \
1401 " (note that this option doesn't disable mappings)\n" \
1402 " -v Print out what would happen before doing it\n" \
1403 " -m Don't run any mappings\n" \
1404 " -f Force de/configuration"
1406 #define inetd_trivial_usage \
1407 "[-f] [-q len] [conf]"
1408 #define inetd_full_usage \
1409 "Listen for network connections and launch programs" \
1411 " -f Run in foreground\n" \
1412 " -q N Set the size of the socket listen queue to N\n" \
1415 #define init_trivial_usage \
1417 #define init_full_usage \
1418 "Init is the parent of all processes"
1419 #define init_notes_usage \
1420 "This version of init is designed to be run only by the kernel.\n" \
1422 "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
1423 "the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \
1424 "runlevels, use sysvinit.\n" \
1426 "BusyBox init works just fine without an inittab. If no inittab is found,\n" \
1427 "it has the following default behavior:\n" \
1429 " ::sysinit:/etc/init.d/rcS\n" \
1430 " ::askfirst:/bin/sh\n" \
1431 " ::ctrlaltdel:/sbin/reboot\n" \
1432 " ::shutdown:/sbin/swapoff -a\n" \
1433 " ::shutdown:/bin/umount -a -r\n" \
1434 " ::restart:/sbin/init\n" \
1436 "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
1438 " tty2::askfirst:/bin/sh\n" \
1439 " tty3::askfirst:/bin/sh\n" \
1440 " tty4::askfirst:/bin/sh\n" \
1442 "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
1444 " <id>:<runlevels>:<action>:<process>\n" \
1448 " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
1449 " The id field is used by BusyBox init to specify the controlling tty for\n" \
1450 " the specified process to run on. The contents of this field are\n" \
1451 " appended to \"/dev/\" and used as-is. There is no need for this field to\n" \
1452 " be unique, although if it isn't you may have strange results. If this\n" \
1453 " field is left blank, the controlling tty is set to the console. Also\n" \
1454 " note that if BusyBox detects that a serial console is in use, then only\n" \
1455 " entries whose controlling tty is either the serial console or /dev/null\n" \
1456 " will be run. BusyBox init does nothing with utmp. We don't need no\n" \
1457 " stinkin' utmp.\n" \
1461 " The runlevels field is completely ignored.\n" \
1465 " Valid actions include: sysinit, respawn, askfirst, wait,\n" \
1466 " once, restart, ctrlaltdel, and shutdown.\n" \
1468 " The available actions can be classified into two groups: actions\n" \
1469 " that are run only once, and actions that are re-run when the specified\n" \
1470 " process exits.\n" \
1472 " Run only-once actions:\n" \
1474 " 'sysinit' is the first item run on boot. init waits until all\n" \
1475 " sysinit actions are completed before continuing. Following the\n" \
1476 " completion of all sysinit actions, all 'wait' actions are run.\n" \
1477 " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
1478 " the specified task completes. 'once' actions are asynchronous,\n" \
1479 " therefore, init does not wait for them to complete. 'restart' is\n" \
1480 " the action taken to restart the init process. By default this should\n" \
1481 " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
1482 " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
1483 " actions are run when the system detects that someone on the system\n" \
1484 " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
1485 " wants to run 'reboot' at this point to cause the system to reboot.\n" \
1486 " Finally the 'shutdown' action specifies the actions to taken when\n" \
1487 " init is told to reboot. Unmounting filesystems and disabling swap\n" \
1488 " is a very good here.\n" \
1490 " Run repeatedly actions:\n" \
1492 " 'respawn' actions are run after the 'once' actions. When a process\n" \
1493 " started with a 'respawn' action exits, init automatically restarts\n" \
1494 " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
1495 " respawning out of control. The 'askfirst' actions acts just like\n" \
1496 " respawn, except that before running the specified process it\n" \
1497 " displays the line \"Please press Enter to activate this console.\"\n" \
1498 " and then waits for the user to press enter before starting the\n" \
1499 " specified process.\n" \
1501 " Unrecognized actions (like initdefault) will cause init to emit an\n" \
1502 " error message, and then go along with its business. All actions are\n" \
1503 " run in the order they appear in /etc/inittab.\n" \
1507 " Specifies the process to be executed and its command line.\n" \
1509 "Example /etc/inittab file:\n" \
1511 " # This is run first except when booting in single-user mode\n" \
1513 " ::sysinit:/etc/init.d/rcS\n" \
1515 " # /bin/sh invocations on selected ttys\n" \
1517 " # Start an \"askfirst\" shell on the console (whatever that may be)\n" \
1518 " ::askfirst:-/bin/sh\n" \
1519 " # Start an \"askfirst\" shell on /dev/tty2-4\n" \
1520 " tty2::askfirst:-/bin/sh\n" \
1521 " tty3::askfirst:-/bin/sh\n" \
1522 " tty4::askfirst:-/bin/sh\n" \
1524 " # /sbin/getty invocations for selected ttys\n" \
1526 " tty4::respawn:/sbin/getty 38400 tty4\n" \
1527 " tty5::respawn:/sbin/getty 38400 tty5\n" \
1530 " # Example of how to put a getty on a serial line (for a terminal)\n" \
1532 " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
1533 " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
1535 " # Example how to put a getty on a modem line\n" \
1536 " #::respawn:/sbin/getty 57600 ttyS2\n" \
1538 " # Stuff to do when restarting the init process\n" \
1539 " ::restart:/sbin/init\n" \
1541 " # Stuff to do before rebooting\n" \
1542 " ::ctrlaltdel:/sbin/reboot\n" \
1543 " ::shutdown:/bin/umount -a -r\n" \
1544 " ::shutdown:/sbin/swapoff -a\n"
1546 #define insmod_trivial_usage \
1547 "[OPTION]... MODULE [symbol=value]..."
1548 #define insmod_full_usage \
1549 "Load the specified kernel modules into the kernel" \
1551 " -f Force module to load into the wrong kernel version\n" \
1552 " -k Make module autoclean-able\n" \
1555 " -L Lock to prevent simultaneous loads of a module\n" \
1556 USE_FEATURE_INSMOD_LOAD_MAP( \
1557 " -m Output load map to stdout\n") \
1558 " -o NAME Set internal module name to NAME\n" \
1559 " -x Do not export externs"
1561 #define install_trivial_usage \
1562 "[-cgmops] [sources] <dest|directory>"
1563 #define install_full_usage \
1564 "Copy files and set attributes" \
1566 " -c Copy the file, default\n" \
1567 " -d Create directories\n" \
1568 " -g Set group ownership\n" \
1569 " -m Set permission modes\n" \
1570 " -o Set ownership\n" \
1571 " -p Preserve date\n" \
1572 " -s Strip symbol tables" \
1574 "\n -Z Set security context of copy" \
1577 #define ip_trivial_usage \
1578 "[OPTIONS] {address | link | route | tunnel | rule} {COMMAND}"
1579 #define ip_full_usage \
1580 "ip [OPTIONS] OBJECT {COMMAND}\n" \
1581 "where OBJECT := {link | addr | route | tunnel |rule}\n" \
1582 "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }"
1584 #define ipaddr_trivial_usage \
1585 "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
1586 " [ dev STRING ] [ to PREFIX ] }"
1587 #define ipaddr_full_usage \
1588 "ipaddr {add|delete} IFADDR dev STRING\n" \
1589 "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
1590 " [ to PREFIX ] [ label PATTERN ]\n" \
1591 " IFADDR := PREFIX | ADDR peer PREFIX\n" \
1592 " [ broadcast ADDR ] [ anycast ADDR ]\n" \
1593 " [ label STRING ] [ scope SCOPE-ID ]\n" \
1594 " SCOPE-ID := [ host | link | global | NUMBER ]"
1596 #define ipcalc_trivial_usage \
1597 "[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
1598 #define ipcalc_full_usage \
1599 "Calculate IP network settings from a IP address" \
1601 "\n -b --broadcast Display calculated broadcast address" \
1602 "\n -n --network Display calculated network address" \
1603 "\n -m --netmask Display default netmask for IP" \
1604 USE_FEATURE_IPCALC_FANCY( \
1605 "\n -p --prefix Display the prefix for IP/NETMASK" \
1606 "\n -h --hostname Display first resolved host name" \
1607 "\n -s --silent Don't ever display error messages")
1609 #define ipcrm_trivial_usage \
1610 "[-[MQS] key] [-[mqs] id]"
1611 #define ipcrm_full_usage \
1612 "The upper-case options MQS are used to remove a shared memory segment by a\n" \
1613 "segment by a shmkey value. The lower-case options mqs are used\n" \
1614 "to remove a segment by shmid value.\n" \
1616 " -[mM] Remove the memory segment after the last detach\n" \
1617 " -[qQ] Remove the message queue\n" \
1618 " -[sS] Remove the semaphore"
1620 #define ipcs_trivial_usage \
1621 "[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
1622 #define ipcs_full_usage \
1623 " -i Specify a specific resource id\n" \
1624 "Resource specification:\n" \
1625 " -m Shared memory segments\n" \
1626 " -q Message queues\n" \
1627 " -s Semaphore arrays\n" \
1628 " -a All (default)\n" \
1629 "Output format:\n" \
1636 #define iplink_trivial_usage \
1637 "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
1638 #define iplink_full_usage \
1639 "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
1640 " dynamic { on | off } |\n" \
1642 "iplink show [ DEVICE ]"
1644 #define iproute_trivial_usage \
1645 "{ list | flush | { add | del | change | append |\n" \
1646 " replace | monitor } ROUTE }"
1647 #define iproute_full_usage \
1648 "iproute { list | flush } SELECTOR\n" \
1649 "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
1650 " [ oif STRING ] [ tos TOS ]\n" \
1651 "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
1652 " SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
1653 " ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]"
1655 #define iprule_trivial_usage \
1656 "{[ list | add | del ] RULE}"
1657 #define iprule_full_usage \
1658 "iprule [ list | add | del ] SELECTOR ACTION\n" \
1659 " SELECTOR := [ from PREFIX ] [ to PREFIX ] [ tos TOS ] [ fwmark FWMARK ]\n" \
1660 " [ dev STRING ] [ pref NUMBER ]\n" \
1661 " ACTION := [ table TABLE_ID ] [ nat ADDRESS ]\n" \
1662 " [ prohibit | reject | unreachable ]\n" \
1663 " [ realms [SRCREALM/]DSTREALM ]\n" \
1664 " TABLE_ID := [ local | main | default | NUMBER ]"
1666 #define iptunnel_trivial_usage \
1667 "{ add | change | del | show } [ NAME ]\n" \
1668 " [ mode { ipip | gre | sit } ]\n" \
1669 " [ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
1670 #define iptunnel_full_usage \
1671 "iptunnel { add | change | del | show } [ NAME ]\n" \
1672 " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
1673 " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
1674 " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]"
1676 #define kill_trivial_usage \
1677 "[-l] [-signal] process-id [process-id ...]"
1678 #define kill_full_usage \
1679 "Send a signal (default is TERM) to the specified process(es)" \
1681 " -l List all signal names and numbers"
1682 #define kill_example_usage \
1683 "$ ps | grep apache\n" \
1684 "252 root root S [apache]\n" \
1685 "263 www-data www-data S [apache]\n" \
1686 "264 www-data www-data S [apache]\n" \
1687 "265 www-data www-data S [apache]\n" \
1688 "266 www-data www-data S [apache]\n" \
1689 "267 www-data www-data S [apache]\n" \
1692 #define killall_trivial_usage \
1693 "[-l] [-q] [-signal] process-name [process-name ...]"
1694 #define killall_full_usage \
1695 "Send a signal (default is TERM) to the specified process(es)" \
1697 " -l List all signal names and numbers\n" \
1698 " -q Do not complain if no processes were killed"
1699 #define killall_example_usage \
1700 "$ killall apache\n"
1702 #define killall5_trivial_usage \
1704 #define killall5_full_usage \
1705 "Send a signal (default is TERM) to all processes outside current session" \
1707 " -l List all signal names and numbers\n" \
1709 #define klogd_trivial_usage \
1711 #define klogd_full_usage \
1714 " -c n Sets the default log level of console messages to n\n" \
1715 " -n Run as foreground process"
1717 #define length_trivial_usage \
1719 #define length_full_usage \
1720 "Print out the length of the specified STRING"
1721 #define length_example_usage \
1722 "$ length Hello\n" \
1725 #define less_trivial_usage \
1726 "[-EMNmh~?] FILE1 FILE2..."
1727 #define less_full_usage \
1728 "View a file or list of files. The position within files can be\n" \
1729 "changed, and files can be manipulated in various ways." \
1731 " -E Quit once the end of a file is reached\n" \
1732 " -M Display a status line containing the current line numbers\n" \
1733 " and the percentage through the file\n" \
1734 " -N Prefix line numbers to each line\n" \
1735 " -m Display a status line containing the percentage through the\n" \
1737 " -~ Suppress ~s displayed when input past the end of the file is\n" \
1740 #define setarch_trivial_usage \
1741 "<personality> <program> [args ...]"
1742 #define setarch_full_usage \
1743 "Personality may be:\n" \
1744 " linux32 Set 32bit uname emulation\n" \
1745 " linux64 Set 64bit uname emulation"
1747 #define ln_trivial_usage \
1748 "[OPTION] TARGET... LINK_NAME|DIRECTORY"
1749 #define ln_full_usage \
1750 "Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \
1751 "You may use '--' to indicate that all following arguments are non-options." \
1753 " -s Make symlinks instead of hardlinks\n" \
1754 " -f Remove existing destination files\n" \
1755 " -n No dereference symlinks - treat like normal file\n" \
1756 " -b Make a backup of the target (if exists) before link operation\n" \
1757 " -S suf Use suffix instead of ~ when making backup files"
1758 #define ln_example_usage \
1759 "$ ln -s BusyBox /tmp/ls\n" \
1760 "$ ls -l /tmp/ls\n" \
1761 "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
1763 #define load_policy_trivial_usage \
1765 #define load_policy_full_usage
1767 #define loadfont_trivial_usage \
1769 #define loadfont_full_usage \
1770 "Load a console font from standard input"
1771 #define loadfont_example_usage \
1772 "$ loadfont < /etc/i18n/fontname\n"
1774 #define loadkmap_trivial_usage \
1776 #define loadkmap_full_usage \
1777 "Load a binary keyboard translation table from standard input"
1778 #define loadkmap_example_usage \
1779 "$ loadkmap < /etc/i18n/lang-keymap\n"
1781 #define logger_trivial_usage \
1782 "[OPTION]... [MESSAGE]"
1783 #define logger_full_usage \
1784 "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin." \
1786 " -s Log to stderr as well as the system log\n" \
1787 " -t TAG Log using the specified tag (defaults to user name)\n" \
1788 " -p PRIO Enter the message with the specified priority.\n" \
1789 " This may be numerical or a 'facility.level' pair."
1790 #define logger_example_usage \
1791 "$ logger \"hello\"\n"
1793 #define login_trivial_usage \
1794 "[OPTION]... [username] [ENV=VAR ...]"
1795 #define login_full_usage \
1796 "Begin a new session on the system" \
1798 " -f Do not authenticate (user already authenticated)\n" \
1799 " -h Name of the remote host for this login\n" \
1800 " -p Preserve environment"
1802 #define logname_trivial_usage \
1804 #define logname_full_usage \
1805 "Print the name of the current user"
1806 #define logname_example_usage \
1810 #define logread_trivial_usage \
1812 #define logread_full_usage \
1813 "Show the messages from syslogd (using circular buffer)" \
1815 " -f Output data as the log grows"
1817 #define losetup_trivial_usage \
1818 "[-o OFFSET] [-d] LOOPDEVICE [FILE]]"
1819 #define losetup_full_usage \
1820 "(Dis)associate LOOPDEVICE with FILE, or display current associations" \
1822 " -d Disassociate LOOPDEVICE\n" \
1823 " -o OFFSET Start OFFSET bytes into FILE"
1824 #define losetup_notes_usage \
1825 "No arguments will display all current associations.\n" \
1826 "One argument (losetup /dev/loop1) will display the current association\n" \
1827 "(if any), or disassociate it (with -d). The display shows the offset\n" \
1828 "and filename of the file the loop device is currently bound to.\n\n" \
1829 "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
1830 "with an optional offset (-o 12345). Encryption is not yet supported.\n\n"
1832 #define ls_trivial_usage \
1833 "[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \
1834 USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \
1835 USE_FEATURE_LS_FILETYPES("p") USE_FEATURE_LS_FOLLOWLINKS("L") \
1836 USE_FEATURE_LS_RECURSIVE("R") USE_FEATURE_LS_SORTFILES("rS") "s" \
1837 USE_FEATURE_AUTOWIDTH("T") USE_FEATURE_LS_TIMESTAMPS("tu") \
1838 USE_FEATURE_LS_SORTFILES("v") USE_FEATURE_AUTOWIDTH("w") "x" \
1839 USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \
1840 USE_SELINUX("K") "] [filenames...]"
1841 #define ls_full_usage \
1842 "List directory contents" \
1844 "\n -1 List files in a single column" \
1845 "\n -A Do not list implied . and .." \
1846 "\n -a Do not hide entries starting with ." \
1847 "\n -C List entries by columns" \
1848 USE_FEATURE_LS_TIMESTAMPS( \
1849 "\n -c With -l: show ctime") \
1850 USE_FEATURE_LS_COLOR( \
1851 "\n --color[={always,never,auto}] Control coloring") \
1852 "\n -d List directory entries instead of contents" \
1853 USE_FEATURE_LS_TIMESTAMPS( \
1854 "\n -e List both full date and full time") \
1855 USE_FEATURE_LS_FILETYPES( \
1856 "\n -F Append indicator (one of */=@|) to entries") \
1857 "\n -i List the i-node for each file" \
1858 "\n -l Use a long listing format" \
1859 "\n -n List numeric UIDs and GIDs instead of names" \
1860 USE_FEATURE_LS_FILETYPES( \
1861 "\n -p Append indicator (one of /=@|) to entries") \
1862 USE_FEATURE_LS_FOLLOWLINKS( \
1863 "\n -L List entries pointed to by symlinks") \
1864 USE_FEATURE_LS_RECURSIVE( \
1865 "\n -R List subdirectories recursively") \
1866 USE_FEATURE_LS_SORTFILES( \
1867 "\n -r Sort the listing in reverse order") \
1868 USE_FEATURE_LS_SORTFILES( \
1869 "\n -S Sort the listing by file size") \
1870 "\n -s List the size of each file, in blocks" \
1871 USE_FEATURE_AUTOWIDTH( \
1872 "\n -T NUM Assume Tabstop every NUM columns") \
1873 USE_FEATURE_LS_TIMESTAMPS( \
1874 "\n -t With -l: show modification time") \
1875 USE_FEATURE_LS_TIMESTAMPS( \
1876 "\n -u With -l: show access time") \
1877 USE_FEATURE_LS_SORTFILES( \
1878 "\n -v Sort the listing by version") \
1879 USE_FEATURE_AUTOWIDTH( \
1880 "\n -w NUM Assume the terminal is NUM columns wide") \
1881 "\n -x List entries by lines instead of by columns" \
1882 USE_FEATURE_LS_SORTFILES( \
1883 "\n -X Sort the listing by extension") \
1884 USE_FEATURE_HUMAN_READABLE( \
1885 "\n -h Print sizes in human readable format (e.g., 1K 243M 2G)") \
1887 "\n -k Print security context") \
1889 "\n -K Print security context in long format") \
1891 "\n -Z Print security context and permission")
1893 #define lsattr_trivial_usage \
1894 "[-Radlv] [files...]"
1895 #define lsattr_full_usage \
1896 "List file attributes on an ext2 fs" \
1898 " -R Recursively list subdirectories\n" \
1899 " -a Do not hide entries starting with .\n" \
1900 " -d List directory entries instead of contents\n" \
1901 " -l Print long flag names\n" \
1902 " -v List the file's version/generation number"
1904 #define lsmod_trivial_usage \
1906 #define lsmod_full_usage \
1907 "List the currently loaded kernel modules"
1909 #ifdef CONFIG_FEATURE_MAKEDEVS_LEAF
1910 #define makedevs_trivial_usage \
1911 "NAME TYPE MAJOR MINOR FIRST LAST [s]"
1912 #define makedevs_full_usage \
1913 "Create a range of block or character special files\n\n" \
1914 "TYPEs include:\n" \
1915 " b: Make a block (buffered) device\n" \
1916 " c or u: Make a character (un-buffered) device\n" \
1917 " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes\n" \
1919 "FIRST specifies the number appended to NAME to create the first device.\n" \
1920 "LAST specifies the number of the last item that should be created\n" \
1921 "If 's' is the last argument, the base device is created as well.\n\n" \
1923 " makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \
1924 " makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
1925 #define makedevs_example_usage \
1926 "# makedevs /dev/ttyS c 4 66 2 63\n" \
1927 "[creates ttyS2-ttyS63]\n" \
1928 "# makedevs /dev/hda b 3 0 0 8 s\n" \
1929 "[creates hda,hda1-hda8]\n"
1932 #ifdef CONFIG_FEATURE_MAKEDEVS_TABLE
1933 #define makedevs_trivial_usage \
1934 "[-d device_table] rootdir"
1935 #define makedevs_full_usage \
1936 "Create a range of special files as specified in a device table.\n" \
1937 "Device table entries take the form of:\n" \
1938 "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
1939 "Where name is the file name, type can be one of:\n" \
1940 " f A regular file\n" \
1942 " c Character special device file\n" \
1943 " b Block special device file\n" \
1944 " p Fifo (named pipe)\n" \
1945 "uid is the user id for the target file, gid is the group id for the\n" \
1946 "target file. The rest of the entries (major, minor, etc) apply to\n" \
1947 "to device special files. A '-' may be used for blank entries."
1948 #define makedevs_example_usage \
1950 "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
1951 "/dev d 755 0 0 - - - - -\n" \
1952 "/dev/console c 666 0 0 5 1 - - -\n" \
1953 "/dev/null c 666 0 0 1 3 0 0 -\n" \
1954 "/dev/zero c 666 0 0 1 5 0 0 -\n" \
1955 "/dev/hda b 640 0 0 3 0 0 0 -\n" \
1956 "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
1966 #define matchpathcon_trivial_usage \
1967 "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
1968 #define matchpathcon_full_usage \
1969 " -n Do not display path" \
1970 "\n -N Do not use translations" \
1971 "\n -f Use alternate file_context file" \
1972 "\n -p Use prefix to speed translations" \
1973 "\n -V Verify file context on disk matches defaults"
1975 #define md5sum_trivial_usage \
1976 "[OPTION] [FILEs...]" \
1977 USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
1978 #define md5sum_full_usage \
1979 "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
1981 "With no FILE, or when FILE is -, read standard input." \
1982 USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \
1983 " -c Check MD5 sums against given list\n" \
1984 "\nThe following two options are useful only when verifying checksums:\n" \
1985 " -s Don't output anything, status code shows success\n" \
1986 " -w Warn about improperly formatted MD5 checksum lines")
1987 #define md5sum_example_usage \
1988 "$ md5sum < busybox\n" \
1989 "6fd11e98b98a58f64ff3398d7b324003\n" \
1990 "$ md5sum busybox\n" \
1991 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
1993 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
1997 #define mdev_trivial_usage \
1999 #define mdev_full_usage \
2000 " -s Scan /sys and populate /dev during system boot\n\n" \
2001 "Called with no options (via hotplug) it uses environment variables\n" \
2002 "to determine which device to add/remove."
2003 #define mdev_notes_usage "" \
2004 USE_FEATURE_MDEV_CONFIG( \
2005 "The mdev config file contains lines that look like:\n" \
2006 " hd[a-z][0-9]* 0:3 660\n\n" \
2007 "That's device name (with regex match), uid:gid, and permissions.\n\n" \
2008 USE_FEATURE_MDEV_EXEC( \
2009 "Optionally, that can be followed (on the same line) by a special character\n" \
2010 "and a command line to run after creating/before deleting the corresponding\n" \
2011 "device(s). The environment variable $MDEV indicates the active device node\n" \
2012 "(which is useful if it's a regex match). For example:\n\n" \
2013 " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
2014 "The special characters are @ (run after creating), $ (run before deleting),\n" \
2015 "and * (run both after creating and before deleting). The commands run in\n" \
2016 "the /dev directory, and use system() which calls /bin/sh.\n\n" \
2018 "Config file parsing stops on the first matching line. If no config\n"\
2019 "entry is matched, devices are created with default 0:0 660. (Make\n"\
2020 "the last line match .* to override this.)\n\n" \
2023 #define mesg_trivial_usage \
2025 #define mesg_full_usage \
2026 "Control write access to your terminal\n" \
2027 " y Allow write access to your terminal\n" \
2028 " n Disallow write access to your terminal"
2030 #define mkdir_trivial_usage \
2031 "[OPTION] DIRECTORY..."
2032 #define mkdir_full_usage \
2033 "Create the DIRECTORY(ies) if they do not already exist" \
2035 " -m Set permission mode (as in chmod), not rwxrwxrwx - umask\n" \
2036 " -p No error if existing, make parent directories as needed" \
2038 "\n -Z Set security context" \
2041 #define mkdir_example_usage \
2042 "$ mkdir /tmp/foo\n" \
2043 "$ mkdir /tmp/foo\n" \
2044 "/tmp/foo: File exists\n" \
2045 "$ mkdir /tmp/foo/bar/baz\n" \
2046 "/tmp/foo/bar/baz: No such file or directory\n" \
2047 "$ mkdir -p /tmp/foo/bar/baz\n"
2049 #define mke2fs_trivial_usage \
2050 "[-c|-l filename] [-b block-size] [-f fragment-size] [-g blocks-per-group] " \
2051 "[-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] " \
2052 "[-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] " \
2053 "[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \
2054 "[-M last-mounted-directory] [-S] [-T filesystem-type] " \
2055 "device [blocks-count]"
2056 #define mke2fs_full_usage \
2057 " -b size Block size in bytes\n" \
2058 " -c Check for bad blocks before creating\n" \
2059 " -E opts Set extended options\n" \
2060 " -f size Fragment size in bytes\n" \
2061 " -F Force (ignore sanity checks)\n" \
2062 " -g num Number of blocks in a block group\n" \
2063 " -i ratio The bytes/inode ratio\n" \
2064 " -j Create a journal (ext3)\n" \
2065 " -J opts Set journal options (size/device)\n" \
2066 " -l file Read bad blocks list from file\n" \
2067 " -L lbl Set the volume label\n" \
2068 " -m percent Percent of fs blocks to reserve for admin\n" \
2069 " -M dir Set last mounted directory\n" \
2070 " -n Do not actually create anything\n" \
2071 " -N num Number of inodes to create\n" \
2072 " -o os Set the 'creator os' field\n" \
2073 " -O features Dir_index/filetype/has_journal/journal_dev/sparse_super\n" \
2075 " -r rev Set filesystem revision\n" \
2076 " -S Write superblock and group descriptors only\n" \
2077 " -T fs-type Set usage type (news/largefile/largefile4)\n" \
2080 #define mkfifo_trivial_usage \
2082 #define mkfifo_full_usage \
2083 "Create a named pipe (identical to 'mknod name p')" \
2085 " -m Create the pipe using the specified mode (default a=rw)" \
2087 "\n -Z Set security context" \
2090 #define mkfs_minix_trivial_usage \
2091 "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
2092 #define mkfs_minix_full_usage \
2093 "Make a MINIX filesystem" \
2095 " -c Check the device for bad blocks\n" \
2096 " -n [14|30] Specify the maximum length of filenames\n" \
2097 " -i INODES Specify the number of inodes for the filesystem\n" \
2098 " -l FILENAME Read the bad blocks list from FILENAME\n" \
2099 " -v Make a Minix version 2 filesystem"
2101 #define mknod_trivial_usage \
2102 "[OPTIONS] NAME TYPE MAJOR MINOR"
2103 #define mknod_full_usage \
2104 "Create a special file (block, character, or pipe)" \
2106 " -m Create the special file using the specified mode (default a=rw)" \
2107 "\n\nTYPEs include:\n" \
2108 " b: Make a block (buffered) device\n" \
2109 " c or u: Make a character (un-buffered) device\n" \
2110 " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes" \
2112 "\n -Z Set security context" \
2115 #define mknod_example_usage \
2116 "$ mknod /dev/fd0 b 2 0\n" \
2117 "$ mknod -m 644 /tmp/pipe p\n"
2119 #define mkswap_trivial_usage \
2120 "[-c] [-v0|-v1] device [block-count]"
2121 #define mkswap_full_usage \
2122 "Prepare a disk partition to be used as swap partition" \
2124 " -c Check for read-ability\n" \
2125 " -v0 Make version 0 swap [max 128 Megs]\n" \
2126 " -v1 Make version 1 swap [big!] (default for kernels > 2.1.117)\n" \
2127 " block-count Number of block to use (default is entire partition)"
2129 #define mktemp_trivial_usage \
2131 #define mktemp_full_usage \
2132 "Create a temporary file with its name based on TEMPLATE.\n" \
2133 "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX)." \
2135 " -d Make a directory instead of a file\n" \
2136 " -q Fail silently if an error occurs"
2137 #define mktemp_example_usage \
2138 "$ mktemp /tmp/temp.XXXXXX\n" \
2139 "/tmp/temp.mWiLjM\n" \
2140 "$ ls -la /tmp/temp.mWiLjM\n" \
2141 "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
2143 #define modprobe_trivial_usage \
2144 "[-knqrsv] MODULE [symbol=value ...]"
2145 #define modprobe_full_usage \
2147 " -k Make module autoclean-able\n" \
2148 " -n Just show what would be done\n" \
2150 " -r Remove module (stacks) or do autoclean\n" \
2151 " -s Report via syslog instead of stderr\n" \
2153 #define modprobe_notes_usage \
2154 "modprobe can (un)load a stack of modules, passing each module options (when\n" \
2155 "loading). modprobe uses a configuration file to determine what option(s) to\n" \
2156 "pass each module it loads.\n" \
2158 "The configuration file is searched (in order) amongst:\n" \
2160 " /etc/modprobe.conf (2.6 only)\n" \
2161 " /etc/modules.conf\n" \
2162 " /etc/conf.modules (deprecated)\n" \
2164 "They all have the same syntax (see below). If none is present, it is\n" \
2165 "_not_ an error; each loaded module is then expected to load without\n" \
2166 "options. Once a file is found, the others are tested for.\n" \
2168 "/etc/modules.conf entry format:\n" \
2170 " alias <alias_name> <mod_name>\n" \
2171 " Makes it possible to modprobe alias_name, when there is no such module.\n" \
2172 " It makes sense if your mod_name is long, or you want a more representative\n" \
2173 " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \
2174 " This makes it also possible to use a different set of options (below) for\n" \
2175 " the module and the alias.\n" \
2176 " A module can be aliased more than once.\n" \
2178 " options <mod_name|alias_name> <symbol=value ...>\n" \
2179 " When loading module mod_name (or the module aliased by alias_name), pass\n" \
2180 " the \"symbol=value\" pairs as option to that module.\n" \
2182 "Sample /etc/modules.conf file:\n" \
2184 " options tulip irq=3\n" \
2185 " alias tulip tulip2\n" \
2186 " options tulip2 irq=4 io=0x308\n" \
2188 "Other functionality offered by 'classic' modprobe is not available in\n" \
2189 "this implementation.\n" \
2191 "If module options are present both in the config file, and on the command line,\n" \
2192 "then the options from the command line will be passed to the module _after_\n" \
2193 "the options from the config file. That way, you can have defaults in the config\n" \
2194 "file, and override them for a specific usage from the command line.\n"
2195 #define modprobe_example_usage \
2196 "(with the above /etc/modules.conf):\n\n" \
2197 "$ modprobe tulip\n" \
2198 " will load the module 'tulip' with default option 'irq=3'\n\n" \
2199 "$ modprobe tulip irq=5\n" \
2200 " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \
2201 "$ modprobe tulip2\n" \
2202 " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \
2203 " which are the default for alias 'tulip2'\n\n" \
2204 "$ modprobe tulip2 irq=8\n" \
2205 " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \
2206 " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \
2207 " from the command line\n\n" \
2208 "$ modprobe tulip2 irq=2 io=0x210\n" \
2209 " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \
2210 " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \
2211 " from the command line\n"
2213 #define more_trivial_usage \
2215 #define more_full_usage \
2216 "View FILE or standard input one screenful at a time"
2217 #define more_example_usage \
2220 #define mount_trivial_usage \
2221 "[flags] DEVICE NODE [-o options,more-options]"
2222 #define mount_full_usage \
2223 "Mount a filesystem. Filesystem autodetection requires /proc be mounted." \
2225 " -a Mount all filesystems in fstab\n" \
2226 USE_FEATURE_MTAB_SUPPORT( \
2227 " -f \"Fake\" Add entry to mount table but don't mount it\n" \
2228 " -n Don't write a mount table entry\n" \
2230 " -o option One of many filesystem options, listed below\n" \
2231 " -r Mount the filesystem read-only\n" \
2232 " -t fs-type Specify the filesystem type\n" \
2233 " -w Mount for reading and writing (default)\n" \
2235 "Options for use with the \"-o\" flag:\n" \
2236 USE_FEATURE_MOUNT_LOOP( \
2237 " loop Ignored (loop devices are autodetected)\n" \
2239 USE_FEATURE_MOUNT_FLAGS( \
2240 " [a]sync Writes are asynchronous / synchronous\n" \
2241 " [no]atime Disable / enable updates to inode access times\n" \
2242 " [no]diratime Disable / enable atime updates to directories\n" \
2243 " [no]dev Allow use of special device files / disallow them\n" \
2244 " [no]exec Allow use of executable files / disallow them\n" \
2245 " [no]suid Allow set-user-id-root programs / disallow them\n" \
2246 " [r]shared Convert [recursively] to a shared subtree\n" \
2247 " [r]slave Convert [recursively] to a slave subtree\n" \
2248 " [r]private Convert [recursively] to a private subtree\n" \
2249 " [un]bindable Make mount point [un]able to be bind mounted\n" \
2250 " bind Bind a directory to an additional location\n" \
2251 " move Relocate an existing mount point\n" \
2253 " remount Remount a mounted filesystem, changing its flags\n" \
2254 " ro/rw Mount for read-only / read-write\n" \
2256 "There are EVEN MORE flags that are specific to each filesystem\n" \
2257 "You'll have to see the written documentation for those filesystems"
2258 #define mount_example_usage \
2260 "/dev/hda3 on / type minix (rw)\n" \
2261 "proc on /proc type proc (rw)\n" \
2262 "devpts on /dev/pts type devpts (rw)\n" \
2263 "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
2264 "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
2265 "$ mount cd_image.iso mydir\n"
2266 #define mount_notes_usage \
2267 "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
2269 #define mountpoint_trivial_usage \
2270 "[-q] <[-d] DIR | -x DEVICE>"
2271 #define mountpoint_full_usage \
2272 "mountpoint checks if the directory is a mountpoint" \
2275 " -d Print major/minor device number of the filesystem\n" \
2276 " -x Print major/minor device number of the blockdevice"
2277 #define mountpoint_example_usage \
2278 "$ mountpoint /proc\n" \
2279 "/proc is not a mountpoint\n" \
2280 "$ mountpoint /sys\n" \
2281 "/sys is a mountpoint\n"
2283 #define mt_trivial_usage \
2284 "[-f device] opcode value"
2285 #define mt_full_usage \
2286 "Control magnetic tape drive operation\n" \
2287 "\nAvailable Opcodes:\n\n" \
2288 "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
2289 "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
2290 "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
2291 "setpart tell unload unlock weof wset"
2293 #define mv_trivial_usage \
2294 "[OPTION]... SOURCE DEST\n" \
2295 "or: mv [OPTION]... SOURCE... DIRECTORY"
2296 #define mv_full_usage \
2297 "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY" \
2299 " -f Don't prompt before overwriting\n" \
2300 " -i Interactive, prompt before overwrite"
2301 #define mv_example_usage \
2302 "$ mv /tmp/foo /bin/bar\n"
2304 #define nameif_trivial_usage \
2305 "[-s] [-c FILE] [{IFNAME MACADDR}]"
2306 #define nameif_full_usage \
2307 "Rename network interface while it in the down state" \
2309 " -c FILE Use configuration file (default is /etc/mactab)\n" \
2310 " -s Use syslog (LOCAL0 facility)\n" \
2311 " IFNAME MACADDR new_interface_name interface_mac_address"
2312 #define nameif_example_usage \
2313 "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
2315 "$ nameif -c /etc/my_mactab_file\n" \
2317 #if ENABLE_NC_SERVER || ENABLE_NC_EXTRA
2318 #define NC_OPTIONS_STR "\n\nOptions:"
2320 #define NC_OPTIONS_STR
2323 #define nc_trivial_usage \
2324 USE_NC_EXTRA("[-iN] [-wN] ")USE_NC_SERVER("[-l] [-p PORT] ") \
2325 "["USE_NC_EXTRA("-f FILENAME|")"IPADDR PORTNUM]"USE_NC_EXTRA(" [-e COMMAND]")
2326 #define nc_full_usage \
2327 "Open a pipe to IP:port" USE_NC_EXTRA(" or file") \
2330 "\n -e Exec rest of command line after connect" \
2331 "\n -i SECS Delay interval for lines sent" \
2332 "\n -w SECS Timeout for connect" \
2333 "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \
2336 "\n -l Listen mode, for inbound connects" \
2338 "\n (use -l twice with -e for persistent server)") \
2339 "\n -p PORT Local port number" \
2342 #define nc_notes_usage "" \
2344 "To use netcat as a terminal emulator on a serial port:\n\n" \
2345 "$ stty 115200 -F /dev/ttyS0\n" \
2346 "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
2349 #define nc_example_usage \
2350 "$ nc foobar.somedomain.com 25\n" \
2351 "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
2353 "214-Commands supported:\n" \
2354 "214- HELO EHLO MAIL RCPT DATA AUTH\n" \
2355 "214 NOOP QUIT RSET HELP\n" \
2357 "221 foobar closing connection\n"
2359 #define netstat_trivial_usage \
2361 #define netstat_full_usage \
2362 "Display networking information" \
2364 " -l Display listening server sockets\n" \
2365 " -a Display all sockets (default: connected)\n" \
2366 " -e Display other/more information\n" \
2367 " -n Don't resolve names\n" \
2368 " -r Display routing table\n" \
2369 " -t Tcp sockets\n" \
2370 " -u Udp sockets\n" \
2371 " -w Raw sockets\n" \
2374 #define nice_trivial_usage \
2375 "[-n ADJUST] [COMMAND [ARG] ...]"
2376 #define nice_full_usage \
2377 "Run a program with modified scheduling priority" \
2379 " -n ADJUST Adjust the scheduling priority by ADJUST"
2381 #define nmeter_trivial_usage \
2383 #define nmeter_full_usage \
2384 "Monitor system in real time\n\n" \
2385 "Format specifiers:\n" \
2386 "%Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \
2387 " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \
2388 "%[niface] Monitor network interface 'iface'\n" \
2389 "%m Monitor allocated memory\n" \
2390 "%[mf] Monitor free memory\n" \
2391 "%[mt] Monitor total memory\n" \
2392 "%s Monitor allocated swap\n" \
2393 "%f Monitor number of used file descriptors\n" \
2394 "%Ni Monitor total/specific IRQ rate\n" \
2395 "%x Monitor context switch rate\n" \
2396 "%p Monitor forks\n" \
2397 "%[pn] Monitor # of processes\n" \
2398 "%b Monitor block io\n" \
2399 "%Nt Show time (with N decimal points)\n" \
2400 "%Nd Milliseconds between updates (default=1000)\n" \
2401 "%r Print <cr> instead of <lf> at EOL"
2402 #define nmeter_example_usage \
2403 "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
2405 #define nohup_trivial_usage \
2407 #define nohup_full_usage \
2408 "Run a command immune to hangups, with output to a non-tty"
2409 #define nohup_example_usage \
2412 #define nslookup_trivial_usage \
2414 #define nslookup_full_usage \
2415 "Query the nameserver for the IP address of the given HOST\n" \
2416 "optionally using a specified DNS server"
2417 #define nslookup_example_usage \
2418 "$ nslookup localhost\n" \
2419 "Server: default\n" \
2420 "Address: default\n" \
2423 "Address: 127.0.0.1\n"
2425 #define od_trivial_usage \
2426 "[-aBbcDdeFfHhIiLlOovXx] [FILE]"
2427 #define od_full_usage \
2428 "Write an unambiguous representation, octal bytes by default, of FILE\n" \
2429 "to standard output. With no FILE, or when FILE is -, read standard input."
2431 #define openvt_trivial_usage \
2432 "<vtnum> <COMMAND> [ARGS...]"
2433 #define openvt_full_usage \
2434 "Start a command on a new virtual terminal"
2435 #define openvt_example_usage \
2436 "openvt 2 /bin/ash\n"
2438 #define passwd_trivial_usage \
2440 #define passwd_full_usage \
2441 "Change a user password. If no name is specified,\n" \
2442 "changes the password for the current user." \
2444 " -a Define which algorithm shall be used for the password\n" \
2445 " (choices: des, md5)\n" /* ", sha1)" */ \
2446 " -d Delete the password for the specified user account\n" \
2447 " -l Locks (disables) the specified user account\n" \
2448 " -u Unlocks (re-enables) the specified user account"
2450 #define patch_trivial_usage \
2451 "[-p<num>] [-i <diff>]"
2452 #define patch_full_usage \
2453 " -p NUM Strip NUM leading components from file names\n" \
2454 " -i DIFF Read DIFF instead of stdin"
2455 #define patch_example_usage \
2456 "$ patch -p1 < example.diff\n" \
2457 "$ patch -p0 -i example.diff"
2459 #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
2460 #define USAGE_PIDOF "Options:"
2462 #define USAGE_PIDOF "\nThis version of pidof accepts no options."
2465 #define pidof_trivial_usage \
2466 "process-name [OPTION] [process-name ...]"
2468 #define pidof_full_usage \
2469 "List the PIDs of all processes with names that match the\n" \
2470 "names on the command line\n" \
2472 USE_FEATURE_PIDOF_SINGLE( \
2473 "\n -s Display only a single PID") \
2474 USE_FEATURE_PIDOF_OMIT( \
2475 "\n -o Omit given pid") \
2476 USE_FEATURE_PIDOF_OMIT( \
2477 "\n Use %PPID to omit the parent pid of pidof itself")
2478 #define pidof_example_usage \
2481 USE_FEATURE_PIDOF_OMIT( \
2482 "$ pidof /bin/sh\n20351 5973 5950\n") \
2483 USE_FEATURE_PIDOF_OMIT( \
2484 "$ pidof /bin/sh -o %PPID\n20351 5950")
2486 #ifndef CONFIG_FEATURE_FANCY_PING
2487 #define ping_trivial_usage \
2489 #define ping_full_usage \
2490 "Send ICMP ECHO_REQUEST packets to network hosts"
2491 #define ping6_trivial_usage \
2493 #define ping6_full_usage \
2494 "Send ICMP ECHO_REQUEST packets to network hosts"
2496 #define ping_trivial_usage \
2498 #define ping_full_usage \
2499 "Send ICMP ECHO_REQUEST packets to network hosts" \
2501 " -4, -6 Force IPv4 or IPv6 hostname resolution\n" \
2502 " -c CNT Send only CNT pings\n" \
2503 " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
2504 " -I iface/IP Use interface or IP address as source\n" \
2505 " -q Quiet, only displays output at start\n" \
2506 " and when finished"
2507 #define ping6_trivial_usage \
2509 #define ping6_full_usage \
2510 "Send ICMP ECHO_REQUEST packets to network hosts" \
2512 " -c CNT Send only CNT pings\n" \
2513 " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
2514 " -I iface/IP Use interface or IP address as source\n" \
2515 " -q Quiet, only displays output at start\n" \
2516 " and when finished"
2518 #define ping_example_usage \
2519 "$ ping localhost\n" \
2520 "PING slag (127.0.0.1): 56 data bytes\n" \
2521 "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
2523 "--- debian ping statistics ---\n" \
2524 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
2525 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
2526 #define ping6_example_usage \
2527 "$ ping6 ip6-localhost\n" \
2528 "PING ip6-localhost (::1): 56 data bytes\n" \
2529 "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
2531 "--- ip6-localhost ping statistics ---\n" \
2532 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
2533 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
2535 #define pivot_root_trivial_usage \
2537 #define pivot_root_full_usage \
2538 "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
2539 "the new root file system"
2541 #define poweroff_trivial_usage \
2542 "[-d<delay>] [-n<nosync>] [-f<force>]"
2543 #define poweroff_full_usage \
2544 "Halt and shut off power" \
2546 " -d Delay interval for halting\n" \
2547 " -n No call to sync()\n" \
2548 " -f Force power off (don't go through init)"
2550 #define printenv_trivial_usage \
2552 #define printenv_full_usage \
2553 "Print all or part of environment.\n" \
2554 "If no environment VARIABLE specified, print them all."
2556 #define printf_trivial_usage \
2557 "FORMAT [ARGUMENT...]"
2558 #define printf_full_usage \
2559 "Format and print ARGUMENT(s) according to FORMAT,\n" \
2560 "where FORMAT controls the output exactly as in C printf"
2561 #define printf_example_usage \
2562 "$ printf \"Val=%d\\n\" 5\n" \
2568 #define ps_trivial_usage \
2570 #define ps_full_usage \
2571 "Report process status" \
2573 "\n -o col1,col2=header Select columns for display" \
2575 #else /* !ENABLE_DESKTOP */
2577 #if !defined CONFIG_SELINUX && !ENABLE_FEATURE_PS_WIDE
2578 #define USAGE_PS "\nThis version of ps accepts no options"
2580 #define USAGE_PS "\nOptions:"
2583 #define ps_trivial_usage \
2585 #define ps_full_usage \
2586 "Report process status\n" \
2589 "\n -Z Show SE Linux context") \
2590 USE_FEATURE_PS_WIDE( \
2593 #endif /* ENABLE_DESKTOP */
2595 #define ps_example_usage \
2597 " PID Uid Gid State Command\n" \
2598 " 1 root root S init\n" \
2599 " 2 root root S [kflushd]\n" \
2600 " 3 root root S [kupdate]\n" \
2601 " 4 root root S [kpiod]\n" \
2602 " 5 root root S [kswapd]\n" \
2603 " 742 andersen andersen S [bash]\n" \
2604 " 743 andersen andersen S -bash\n" \
2605 " 745 root root S [getty]\n" \
2606 " 2990 andersen andersen R ps\n"
2609 #define pwd_trivial_usage \
2611 #define pwd_full_usage \
2612 "Print the full filename of the current working directory"
2613 #define pwd_example_usage \
2617 #define raidautorun_trivial_usage \
2619 #define raidautorun_full_usage \
2620 "Tell the kernel to automatically search and start RAID arrays"
2621 #define raidautorun_example_usage \
2622 "$ raidautorun /dev/md0"
2624 #define rdate_trivial_usage \
2626 #define rdate_full_usage \
2627 "Get and possibly set the system date and time from a remote HOST" \
2629 " -s Set the system date and time (default)\n" \
2630 " -p Print the date and time"
2632 #define readahead_trivial_usage \
2634 #define readahead_full_usage \
2635 "Preload FILE(s) in RAM cache so that subsequent reads for those" \
2636 "files do not block on disk I/O"
2638 #define readlink_trivial_usage \
2639 USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE"
2640 #define readlink_full_usage \
2641 "Display the value of a symlink" \
2642 USE_FEATURE_READLINK_FOLLOW( \
2644 " -f Canonicalize by following all symlinks")
2646 #define readprofile_trivial_usage \
2648 #define readprofile_full_usage \
2650 " -m <mapfile> (Default: /boot/System.map)\n" \
2651 " -p <profile> (Default: /proc/profile)\n" \
2652 " -M <mult> Set the profiling multiplier to <mult>\n" \
2653 " -i Print only info about the sampling step\n" \
2655 " -a Print all symbols, even if count is 0\n" \
2656 " -b Print individual histogram-bin counts\n" \
2657 " -s Print individual counters within functions\n" \
2658 " -r Reset all the counters (root only)\n" \
2659 " -n Disable byte order auto-detection"
2661 #define realpath_trivial_usage \
2663 #define realpath_full_usage \
2664 "Return the absolute pathnames of given argument"
2666 #define reboot_trivial_usage \
2667 "[-d<delay>] [-n<nosync>] [-f<force>]"
2668 #define reboot_full_usage \
2669 "Reboot the system" \
2671 " -d Delay interval for rebooting\n" \
2672 " -n No call to sync()\n" \
2673 " -f Force reboot (don't go through init)"
2675 #define renice_trivial_usage \
2676 "{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]"
2677 #define renice_full_usage \
2678 "Change priority of running processes" \
2680 " -n Adjusts current nice value (smaller is faster)\n" \
2681 " -p Process id(s) (default)\n" \
2682 " -g Process group id(s)\n" \
2683 " -u Process user name(s) and/or id(s)"
2685 #define reset_trivial_usage \
2687 #define reset_full_usage \
2690 #define resize_trivial_usage \
2692 #define resize_full_usage \
2695 #define rm_trivial_usage \
2696 "[OPTION]... FILE..."
2697 #define rm_full_usage \
2698 "Remove (unlink) the FILE(s). You may use '--' to\n" \
2699 "indicate that all following arguments are non-options." \
2701 " -i Always prompt before removing each destination\n" \
2702 " -f Remove existing destinations, never prompt\n" \
2703 " -r,-R Remove the contents of directories recursively"
2704 #define rm_example_usage \
2705 "$ rm -rf /tmp/foo\n"
2707 #define rmdir_trivial_usage \
2708 "[OPTION]... DIRECTORY..."
2709 #define rmdir_full_usage \
2710 "Remove the DIRECTORY, if it is empty"
2711 #define rmdir_example_usage \
2712 "# rmdir /tmp/foo\n"
2714 #define rmmod_trivial_usage \
2715 "[OPTION]... [MODULE]..."
2716 #define rmmod_full_usage \
2717 "Unload the specified kernel modules from the kernel" \
2719 " -a Remove all unused modules (recursively)"
2720 #define rmmod_example_usage \
2723 #define route_trivial_usage \
2724 "[{add|del|delete}]"
2725 #define route_full_usage \
2726 "Edit the kernel's routing tables" \
2728 " -n Dont resolve names\n" \
2729 " -e Display other/more information\n" \
2730 " -A inet" USE_FEATURE_IPV6("{6}") " Select address family"
2732 #define rpm_trivial_usage \
2733 "-i -q[ildc]p package.rpm"
2734 #define rpm_full_usage \
2735 "Manipulate RPM packages" \
2737 "\n -i Install package" \
2738 "\n -q Query package" \
2739 "\n -p Query uninstalled package" \
2740 "\n -i Show information" \
2741 "\n -l List contents" \
2742 "\n -d List documents" \
2743 "\n -c List config files"
2745 #define rpm2cpio_trivial_usage \
2747 #define rpm2cpio_full_usage \
2748 "Output a cpio archive of the rpm file"
2750 #define runcon_trivial_usage \
2751 "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \
2752 " runcon CONTEXT COMMAND [args]"
2753 #define runcon_full_usage \
2754 "runcon [-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \
2755 "runcon CONTEXT COMMAND [args]\n" \
2756 "Run a program in a different security context\n\n" \
2757 " CONTEXT Complete security context\n" \
2758 " -c, --compute Compute process transition context before modifying\n" \
2759 " -t, --type=TYPE Type (for same role as parent)\n" \
2760 " -u, --user=USER User identity\n" \
2761 " -r, --role=ROLE Role\n" \
2762 " -l, --range=RNG Levelrange" \
2764 #define run_parts_trivial_usage \
2765 "[-t] "USE_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
2766 #define run_parts_full_usage \
2767 "Run a bunch of scripts in a directory" \
2769 " -t Prints what would be run, but does not actually run anything\n" \
2770 " -a ARG Pass ARG as an argument for every program invoked\n" \
2771 " -u MASK Set the umask to MASK before executing every program" \
2772 USE_FEATURE_RUN_PARTS_FANCY("\n -l Prints names of all matching files even when they are not executable")
2774 #define run_parts_example_usage \
2775 "$ run-parts -a start /etc/init.d\n" \
2776 "$ run-parts -a stop=now /etc/init.d\n\n" \
2777 "Let's assume you have a script foo/dosomething:\n" \
2779 "for i in $*; do eval $i; done ; unset i\n" \
2780 "case \"$1\" in\n" \
2781 "start*) echo starting something ;;\n" \
2782 "stop*) set -x ; shutdown -h $stop ;;\n" \
2784 "Running this yields:\n" \
2785 "$run-parts -a stop=+4m foo/\n" \
2788 #define runlevel_trivial_usage \
2790 #define runlevel_full_usage \
2791 "Find the current and previous system runlevel.\n\n" \
2792 "If no utmp file exists or if no runlevel record can be found,\n" \
2794 #define runlevel_example_usage \
2795 "$ runlevel /var/run/utmp\n" \
2798 #define runsv_trivial_usage \
2800 #define runsv_full_usage \
2801 "Start and monitor a service and optionally an appendant log service"
2803 #define runsvdir_trivial_usage \
2805 #define runsvdir_full_usage \
2806 "Start a runsv process for each subdirectory"
2808 #define rx_trivial_usage \
2810 #define rx_full_usage \
2811 "Receive a file using the xmodem protocol"
2812 #define rx_example_usage \
2815 #define sed_trivial_usage \
2816 "[-efinr] pattern [files...]"
2817 #define sed_full_usage \
2819 " -e script Add the script to the commands to be executed\n" \
2820 " -f scriptfile Add script-file contents to the\n" \
2821 " commands to be executed\n" \
2822 " -i Edit files in-place\n" \
2823 " -n Suppress automatic printing of pattern space\n" \
2824 " -r Use extended regular expression syntax\n" \
2826 "If no -e or -f is given, the first non-option argument is taken as the sed\n" \
2827 "script to interpret. All remaining arguments are names of input files; if no\n" \
2828 "input files are specified, then the standard input is read. Source files\n" \
2829 "will not be modified unless -i option is given."
2831 #define sed_example_usage \
2832 "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
2835 #define selinuxenabled_trivial_usage
2836 #define selinuxenabled_full_usage
2838 #define seq_trivial_usage \
2839 "[first [increment]] last"
2840 #define seq_full_usage \
2841 "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \
2842 "FIRST, INCREMENT default to 1" \
2843 "\n\nArguments:\n" \
2846 " FIRST INCREMENT LAST"
2848 #define setconsole_trivial_usage \
2849 "[-r|--reset] [DEVICE]"
2850 #define setconsole_full_usage \
2851 "Redirect system console output to DEVICE (default: /dev/tty)" \
2853 " -r Reset output to /dev/console"
2855 #define setenforce_trivial_usage \
2856 "[ Enforcing | Permissive | 1 | 0 ]"
2857 #define setenforce_full_usage
2859 #define setkeycodes_trivial_usage \
2860 "SCANCODE KEYCODE ..."
2861 #define setkeycodes_full_usage \
2862 "Set entries into the kernel's scancode-to-keycode map,\n" \
2863 "allowing unusual keyboards to generate usable keycodes.\n\n" \
2864 "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
2865 "and KEYCODE is given in decimal"
2866 #define setkeycodes_example_usage \
2867 "$ setkeycodes e030 127\n"
2869 #define setlogcons_trivial_usage \
2871 #define setlogcons_full_usage \
2872 "Redirect the kernel output to console N (0 for current)"
2874 #define setsid_trivial_usage \
2876 #define setsid_full_usage \
2877 "Run any program in a new session by calling setsid() before\n" \
2878 "exec'ing the rest of its arguments. See setsid(2) for details."
2880 #define lash_trivial_usage \
2882 "or: sh -c command [args]..."
2883 #define lash_full_usage \
2884 "The BusyBox LAme SHell (command interpreter)"
2885 #define lash_notes_usage \
2886 "This command does not yet have proper documentation.\n\n" \
2887 "Use lash just as you would use any other shell. It properly handles pipes,\n" \
2888 "redirects, job control, can be used as the shell for scripts, and has a\n" \
2889 "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
2890 "Bourne Shell syntax. If you need things like \"if-then-else\", \"while\", and such\n" \
2891 "use ash or bash. If you just need a very simple and extremely small shell,\n" \
2892 "this will do the job."
2894 #define last_trivial_usage \
2896 #define last_full_usage \
2897 "Show listing of the last users that logged into the system"
2899 #define sha1sum_trivial_usage \
2900 "[OPTION] [FILEs...]" \
2901 USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
2902 #define sha1sum_full_usage \
2903 "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n" \
2904 "With no FILE, or when FILE is -, read standard input." \
2906 USE_FEATURE_MD5_SHA1_SUM_CHECK( \
2907 " -c Check SHA1 sums against given list\n" \
2908 "\nThe following two options are useful only when verifying checksums:\n" \
2909 " -s Don't output anything, status code shows success\n" \
2910 " -w Warn about improperly formatted SHA1 checksum lines")
2912 #define sleep_trivial_usage \
2913 USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...")
2914 #define sleep_full_usage \
2915 SKIP_FEATURE_FANCY_SLEEP("Pause for N seconds") \
2916 USE_FEATURE_FANCY_SLEEP( \
2917 "Pause for a time equal to the total of the args given, where each arg can\n" \
2918 "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays")
2919 #define sleep_example_usage \
2921 "[2 second delay results]\n" \
2922 USE_FEATURE_FANCY_SLEEP( \
2923 "$ sleep 1d 3h 22m 8s\n" \
2924 "[98528 second delay results]\n")
2926 #define sort_trivial_usage \
2928 USE_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o outfile] [-k start[.offset][opts][,end[.offset][opts]] [-t char") \
2930 #define sort_full_usage \
2931 "Sort lines of text in the specified files" \
2933 USE_FEATURE_SORT_BIG( \
2934 " -b Ignore leading blanks\n" \
2935 " -c Check whether input is sorted\n" \
2936 " -d Dictionary order (blank or alphanumeric only)\n" \
2937 " -f Ignore case\n" \
2938 " -g General numerical sort\n" \
2939 " -i Ignore unprintable characters\n" \
2940 " -k Specify sort key\n" \
2941 " -M Sort month\n") \
2942 " -n Sort numbers\n" \
2943 USE_FEATURE_SORT_BIG( \
2944 " -o Output to file\n" \
2945 " -k Sort by key\n" \
2946 " -t Use key separator other than whitespace\n") \
2947 " -r Reverse sort order\n" \
2948 USE_FEATURE_SORT_BIG( \
2949 " -s Stable (don't sort ties alphabetically)\n") \
2950 " -u Suppress duplicate lines" \
2951 USE_FEATURE_SORT_BIG( \
2952 "\n -z Input terminated by nulls, not newlines\n") \
2953 USE_FEATURE_SORT_BIG( \
2954 " -mST Ignored for GNU compatibility") \
2956 #define sort_example_usage \
2957 "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
2964 USE_FEATURE_SORT_BIG( \
2965 "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \
2972 #define split_trivial_usage \
2973 "[OPTION] [INPUT [PREFIX]]"
2974 #define split_full_usage \
2976 "\n -b n[k|m] Split by bytes" \
2977 "\n -l n Split by lines" \
2978 "\n -a n Use n letters as suffix"
2979 #define split_example_usage \
2980 "$ split TODO foo\n" \
2981 "$ cat TODO | split -a 2 -l 2 TODO_\n"
2983 #define start_stop_daemon_trivial_usage \
2984 "[OPTIONS] [--start|--stop] ... [-- arguments...]"
2985 #define start_stop_daemon_full_usage \
2986 "Start and stop services" \
2988 "\n -S|--start Start" \
2989 "\n -K|--stop Stop" \
2990 "\n -a|--startas <pathname> Starts process specified by pathname" \
2991 "\n -b|--background Force process into background" \
2992 "\n -u|--user <username>|<uid> Stop this user's processes" \
2993 "\n -x|--exec <executable> Program to either start or check" \
2994 "\n -m|--make-pidfile Create the -p file and enter pid in it" \
2995 "\n -n|--name <process-name> Stop processes with this name" \
2996 "\n -p|--pidfile <pid-file> Save or load pid using a pid-file" \
2997 "\n -q|--quiet Quiet" \
2998 USE_FEATURE_START_STOP_DAEMON_FANCY( \
2999 "\n -o|--oknodo Exit status 0 if nothing done" \
3000 "\n -v|--verbose Verbose" \
3001 "\n -N|--nicelevel <N> Add N to process's nice level" \
3003 "\n -s|--signal <signal> Signal to send (default TERM)" \
3004 "\n -c|--chuid <user>[:[<group>]] Change to specified user/group"
3006 #define stat_trivial_usage \
3008 #define stat_full_usage \
3009 "Display file (default) or filesystem status" \
3011 USE_FEATURE_STAT_FORMAT( \
3012 " -c fmt Use the specified format\n") \
3013 " -f Display filesystem status\n" \
3014 " -L,-l Dereference links\n" \
3015 " -t Display info in terse form" \
3017 "\n -Z Print security context" \
3019 USE_FEATURE_STAT_FORMAT( \
3020 "\n\nValid format sequences for files:\n" \
3021 " %a Access rights in octal\n" \
3022 " %A Access rights in human readable form\n" \
3023 " %b Number of blocks allocated (see %B)\n" \
3024 " %B The size in bytes of each block reported by %b\n" \
3025 " %d Device number in decimal\n" \
3026 " %D Device number in hex\n" \
3027 " %f Raw mode in hex\n" \
3029 " %g Group ID of owner\n" \
3030 " %G Group name of owner\n" \
3031 " %h Number of hard links\n" \
3032 " %i Inode number\n" \
3034 " %N Quoted file name with dereference if symlink\n" \
3035 " %o I/O block size\n" \
3036 " %s Total size, in bytes\n" \
3037 " %t Major device type in hex\n" \
3038 " %T Minor device type in hex\n" \
3039 " %u User ID of owner\n" \
3040 " %U User name of owner\n" \
3041 " %x Time of last access\n" \
3042 " %X Time of last access as seconds since Epoch\n" \
3043 " %y Time of last modification\n" \
3044 " %Y Time of last modification as seconds since Epoch\n" \
3045 " %z Time of last change\n" \
3046 " %Z Time of last change as seconds since Epoch\n" \
3047 "\nValid format sequences for file systems:\n" \
3048 " %a Free blocks available to non-superuser\n" \
3049 " %b Total data blocks in file system\n" \
3050 " %c Total file nodes in file system\n" \
3051 " %d Free file nodes in file system\n" \
3052 " %f Free blocks in file system\n" \
3054 " %C Security context in SELinux\n" \
3056 " %i File System ID in hex\n" \
3057 " %l Maximum length of filenames\n" \
3059 " %s Block size (for faster transfer)\n" \
3060 " %S Fundamental block size (for block counts)\n" \
3061 " %t Type in hex\n" \
3062 " %T Type in human readable form" \
3065 #define strings_trivial_usage \
3066 "[-afo] [-n length] [file ... ]"
3067 #define strings_full_usage \
3068 "Display printable strings in a binary file" \
3070 "\n -a Scan the whole files (this is the default)" \
3071 "\n -f Precede each string with the name of the file where it was found" \
3072 "\n -n N Specifies that at least N characters forms a sequence (default 4)" \
3073 "\n -o Each string is preceded by its decimal offset in the file"
3075 #define stty_trivial_usage \
3076 "[-a|g] [-F DEVICE] [SETTING]..."
3077 #define stty_full_usage \
3078 "Without arguments, prints baud rate, line discipline,\n" \
3079 "and deviations from stty sane" \
3081 "\n -F DEVICE Open device instead of stdin" \
3082 "\n -a Print all current settings in human-readable form" \
3083 "\n -g Print in stty-readable form" \
3084 "\n [SETTING] See manpage"
3086 #define su_trivial_usage \
3087 "[OPTION]... [-] [username]"
3088 #define su_full_usage \
3089 "Change user id or become root" \
3091 "\n -p, -m Preserve environment" \
3092 "\n -c Command to pass to 'sh -c'" \
3093 "\n -s Shell to use instead of default shell"
3095 #define sulogin_trivial_usage \
3096 "[OPTION]... [tty-device]"
3097 #define sulogin_full_usage \
3098 "Single user login" \
3102 #define sum_trivial_usage \
3104 #define sum_full_usage \
3105 "Checksum and count the blocks in a file" \
3107 " -r Use BSD sum algorithm (1K blocks)\n" \
3108 " -s Use System V sum algorithm (512byte blocks)"
3110 #define sv_trivial_usage \
3111 "[-v] [-w sec] command service..."
3112 #define sv_full_usage \
3113 "Report the current status and control the state of services " \
3114 "monitored by the runsv supervisor"
3116 #define svlogd_trivial_usage \
3117 "[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..."
3118 #define svlogd_full_usage \
3119 "Continuously read log data from standard input, optionally " \
3120 "filter log messages, and write the data to one or more automatically " \
3123 #define swapoff_trivial_usage \
3125 #define swapoff_full_usage \
3126 "Stop swapping virtual memory pages on DEVICE" \
3128 " -a Stop swapping on all swap devices"
3130 #define swapon_trivial_usage \
3132 #define swapon_full_usage \
3133 "Start swapping virtual memory pages on DEVICE" \
3135 " -a Start swapping on all swap devices"
3137 #define switch_root_trivial_usage \
3138 "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]"
3139 #define switch_root_full_usage \
3140 "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \
3141 "and exec NEW_INIT" \
3143 " -c Redirect console to device on new root"
3145 #define sync_trivial_usage \
3147 #define sync_full_usage \
3148 "Write all buffered filesystem blocks to disk"
3150 #define sysctl_trivial_usage \
3151 "[OPTIONS]... [VALUE]..."
3152 #define sysctl_full_usage \
3153 "Configure kernel parameters at runtime" \
3155 " -n Use this option to disable printing of the key name when printing values\n" \
3156 " -w Use this option when you want to change a sysctl setting\n" \
3157 " -p Load in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \
3158 " -a Display all values currently available\n" \
3159 " -A Display all values currently available in table form"
3160 #define sysctl_example_usage \
3161 "sysctl [-n] variable ...\n" \
3162 "sysctl [-n] -w variable=value ...\n" \
3163 "sysctl [-n] -a\n" \
3164 "sysctl [-n] -p <file> (default /etc/sysctl.conf)\n" \
3167 #define syslogd_trivial_usage \
3169 #define syslogd_full_usage \
3170 "System logging utility.\n" \
3171 "Note that this version of syslogd ignores /etc/syslog.conf." \
3173 "\n -n Run as foreground process" \
3174 "\n -O FILE Use an alternate log file (default=/var/log/messages)" \
3175 "\n -l n Sets the local log level of messages to n" \
3176 "\n -S Make logging output smaller" \
3177 USE_FEATURE_ROTATE_LOGFILE( \
3178 "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \
3179 "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \
3180 USE_FEATURE_REMOTE_LOG( \
3181 "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
3182 "\n -L Log locally and via network logging (default is network only)") \
3183 USE_FEATURE_IPC_SYSLOG( \
3184 "\n -C[size(KiB)] Log to a shared mem buffer (read the buffer using logread)")
3185 /* NB: -Csize shouldn't have space (because size is optional) */
3186 /* "\n -m MIN Minutes between MARK lines (default=20, 0=off)" */
3187 #define syslogd_example_usage \
3188 "$ syslogd -R masterlog:514\n" \
3189 "$ syslogd -R 192.168.1.1:601\n"
3191 #define tail_trivial_usage \
3192 "[OPTION]... [FILE]..."
3193 #define tail_full_usage \
3194 "Print last 10 lines of each FILE to standard output.\n" \
3195 "With more than one FILE, precede each with a header giving the\n" \
3196 "file name. With no FILE, or when FILE is -, read standard input." \
3198 USE_FEATURE_FANCY_TAIL( \
3199 "\n -c N[kbm] Output the last N bytes") \
3200 "\n -n N[kbm] Print last N lines instead of last 10" \
3201 "\n -f Output data as the file grows" \
3202 USE_FEATURE_FANCY_TAIL( \
3203 "\n -q Never output headers giving file names" \
3204 "\n -s SEC Wait SEC seconds between reads with -f" \
3205 "\n -v Always output headers giving file names" \
3207 "If the first character of N (bytes or lines) is a '+', output begins with\n" \
3208 "the Nth item from the start of each file, otherwise, print the last N items\n" \
3209 "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
3210 #define tail_example_usage \
3211 "$ tail -n 1 /etc/resolv.conf\n" \
3212 "nameserver 10.0.0.1\n"
3214 #define tar_trivial_usage \
3215 "-[" USE_FEATURE_TAR_CREATE("c") USE_FEATURE_TAR_GZIP("z") \
3216 USE_FEATURE_TAR_BZIP2("j") USE_FEATURE_TAR_LZMA("a") \
3217 USE_FEATURE_TAR_COMPRESS("Z") "xtvO] " \
3218 USE_FEATURE_TAR_FROM("[-X FILE] ") \
3219 "[-f TARFILE] [-C DIR] [FILE(s)] ..."
3220 #define tar_full_usage \
3221 "Create, extract, or list files from a tar file" \
3223 USE_FEATURE_TAR_CREATE( \
3227 "\nArchive format selection:\n" \
3228 USE_FEATURE_TAR_GZIP( \
3229 " z Filter the archive through gzip\n") \
3230 USE_FEATURE_TAR_BZIP2( \
3231 " j Filter the archive through bzip2\n") \
3232 USE_FEATURE_TAR_LZMA( \
3233 " a Filter the archive through lzma\n") \
3234 USE_FEATURE_TAR_COMPRESS( \
3235 " Z Filter the archive through compress\n") \
3236 "\nFile selection:\n" \
3237 " f Name of TARFILE or \"-\" for stdin\n" \
3238 " O Extract to stdout\n" \
3239 USE_FEATURE_TAR_FROM( \
3240 " exclude File to exclude\n" \
3241 " X File with names to exclude\n") \
3242 " C Change to directory DIR before operation\n" \
3244 #define tar_example_usage \
3245 "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
3246 "$ tar -cf /tmp/tarball.tar /usr/local\n"
3248 #define taskset_trivial_usage \
3249 "[OPTIONS] [mask] [pid | command [arg]...]"
3250 #define taskset_full_usage \
3251 "Set or get CPU affinity" \
3253 " -p Operate on an existing PID"
3254 #define taskset_example_usage \
3255 "$ taskset 0x7 ./dgemm_test&\n" \
3256 "$ taskset -p 0x1 $!\n" \
3257 "pid 4790's current affinity mask: 7\n" \
3258 "pid 4790's new affinity mask: 1\n" \
3259 "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
3260 "pid 6671's current affinity mask: 1\n" \
3261 "pid 6671's new affinity mask: 1\n" \
3262 "$ taskset -p 1\n" \
3263 "pid 1's current affinity mask: 3\n"
3265 #define tee_trivial_usage \
3266 "[OPTION]... [FILE]..."
3267 #define tee_full_usage \
3268 "Copy standard input to each FILE, and also to standard output" \
3270 " -a Append to the given FILEs, do not overwrite\n" \
3271 " -i Ignore interrupt signals (SIGINT)"
3272 #define tee_example_usage \
3273 "$ echo \"Hello\" | tee /tmp/foo\n" \
3274 "$ cat /tmp/foo\n" \
3277 #ifdef CONFIG_FEATURE_TELNET_AUTOLOGIN
3278 #define telnet_trivial_usage \
3279 "[-a] [-l USER] HOST [PORT]"
3280 #define telnet_full_usage \
3281 "Connect to remote telnet server" \
3283 " -a Attempt an automatic login with the USER variable\n" \
3284 " -l USER Attempt an automatic login with the USER argument\n" \
3285 " HOST The official name, alias or the IP address of the\n" \
3287 " PORT The remote port number to connect to. If it is not\n" \
3288 " specified, the default telnet (23) port is used."
3290 #define telnet_trivial_usage \
3292 #define telnet_full_usage \
3293 "Connect to remote telnet server"
3296 #define telnetd_trivial_usage \
3298 #define telnetd_full_usage \
3299 "Handle incoming telnet connections" \
3300 SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") \
3302 "\n -l LOGIN Exec LOGIN on connect" \
3303 "\n -f issue_file Display issue_file instead of /etc/issue" \
3304 USE_FEATURE_TELNETD_STANDALONE( \
3305 "\n -p PORT Port to listen to" \
3306 "\n -b ADDR Address to bind to" \
3307 "\n -F Stay in foreground" \
3308 "\n -i Run as inetd subservice" \
3311 #define test_trivial_usage \
3312 "EXPRESSION\n or [ EXPRESSION ]"
3313 #define test_full_usage \
3314 "Check file types and compares values returning an exit code\n" \
3315 "determined by the value of EXPRESSION"
3316 #define test_example_usage \
3317 "$ test 1 -eq 2\n" \
3320 "$ test 1 -eq 1\n" \
3326 "$ [ -d /junk ]\n" \
3330 #define tcpsvd_trivial_usage \
3331 "[-hEv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] ip port prog..."
3332 /* with not-implemented options: */
3333 /* "[-hpEvv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] [-i dir|-x cdb] [ -t sec] ip port prog..." */
3334 #define tcpsvd_full_usage \
3335 "Creates TCP socket, binds it to ip:port and listens on it\n" \
3336 "for incoming connections. For each connection it runs prog." \
3338 "\nip IP to listen on. '0' = all" \
3339 "\nport Port to listen on" \
3340 "\nprog [arg] Program to run" \
3341 "\n-l name Local hostname (else looks up local hostname in DNS)" \
3342 "\n-u user[:group] Change to user/group after bind" \
3343 "\n-c n Handle up to n connections simultaneously" \
3344 "\n-b n Allow a backlog of approximately n TCP SYNs" \
3345 "\n-C n[:msg] Allow only up to n connections from the same IP" \
3346 "\n New connections from this IP address are closed" \
3347 "\n immediately. 'msg' is written to the peer before close" \
3348 "\n-h Look up peer's hostname" \
3349 "\n-E Do not set up environment variables" \
3352 #define udpsvd_trivial_usage \
3353 "[-hEv] [-c n] [-u user] [-l name] ip port prog"
3354 #define udpsvd_full_usage \
3355 "Creates UDP socket, binds it to ip:port and listens on it\n" \
3356 "for incoming packets. For each packet it runs prog\n" \
3357 "(redirecting all further packets with same peer ip:port to it)." \
3359 "\nip IP to listen on. '0' = all" \
3360 "\nport Port to listen on" \
3361 "\nprog [arg] Program to run" \
3362 "\n-l name Local hostname (else looks up local hostname in DNS)" \
3363 "\n-u user[:group] Change to user/group after bind" \
3364 "\n-c n Handle up to n connections simultaneously" \
3365 "\n-h Look up peer's hostname" \
3366 "\n-E Do not set up environment variables" \
3369 #define tftp_trivial_usage \
3370 "[OPTION]... HOST [PORT]"
3371 #define tftp_full_usage \
3372 "Transfer a file from/to tftp server using \"octet\" mode" \
3374 "\n -l FILE Local FILE" \
3375 "\n -r FILE Remote FILE" \
3376 USE_FEATURE_TFTP_GET( \
3379 USE_FEATURE_TFTP_PUT( \
3382 USE_FEATURE_TFTP_BLOCKSIZE( \
3383 "\n -b SIZE Transfer blocks of SIZE octets" \
3385 #define time_trivial_usage \
3386 "[OPTION]... COMMAND [ARGS...]"
3387 #define time_full_usage \
3388 "Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
3389 "COMMAND's resource usage information is displayed." \
3393 #define top_trivial_usage \
3394 "[-b] [-n count] [-d seconds]"
3395 #define top_full_usage \
3396 "Provide a view of process activity in real time.\n" \
3397 "Read the status of all processes from /proc each <seconds>\n" \
3398 "and show the status for however many processes will fit on the screen."
3400 #define touch_trivial_usage \
3401 "[-c] FILE [FILE ...]"
3402 #define touch_full_usage \
3403 "Update the last-modified date on the given FILE[s]" \
3405 " -c Do not create any files"
3406 #define touch_example_usage \
3407 "$ ls -l /tmp/foo\n" \
3408 "/bin/ls: /tmp/foo: No such file or directory\n" \
3409 "$ touch /tmp/foo\n" \
3410 "$ ls -l /tmp/foo\n" \
3411 "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
3413 #define tr_trivial_usage \
3414 "[-cds] STRING1 [STRING2]"
3415 #define tr_full_usage \
3416 "Translate, squeeze, and/or delete characters from\n" \
3417 "standard input, writing to standard output" \
3419 " -c Take complement of STRING1\n" \
3420 " -d Delete input characters coded STRING1\n" \
3421 " -s Squeeze multiple output characters of STRING2 into one character"
3422 #define tr_example_usage \
3423 "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
3426 #define traceroute_trivial_usage \
3427 "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \
3428 " [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \
3429 " [-z pausemsecs] host [data size]"
3430 #define traceroute_full_usage \
3431 "Trace the route ip packets follow going to \"host\"" \
3433 " -F Set the don't fragment bit\n" \
3434 " -I Use ICMP ECHO instead of UDP datagrams\n" \
3435 " -l Display the ttl value of the returned packet\n" \
3436 " -d Set SO_DEBUG options to socket\n" \
3437 " -n Print hop addresses numerically rather than symbolically\n" \
3438 " -r Bypass the normal routing tables and send directly to a host\n" \
3440 " -m max_ttl Max time-to-live (max number of hops)\n" \
3441 " -p port# Base UDP port number used in probes\n" \
3442 " (default is 33434)\n" \
3443 " -q nqueries Number of probes per 'ttl' (default 3)\n" \
3444 " -s src_addr IP address to use as the source address\n" \
3445 " -t tos Type-of-service in probe packets (default 0)\n" \
3446 " -w wait Time in seconds to wait for a response to a probe\n" \
3447 " (default 3 sec)\n" \
3448 " -g Specify a loose source route gateway (8 max)"
3451 #define true_trivial_usage \
3453 #define true_full_usage \
3454 "Return an exit code of TRUE (0)"
3455 #define true_example_usage \
3460 #define tty_trivial_usage \
3462 #define tty_full_usage \
3463 "Print the file name of the terminal connected to standard input" \
3464 USE_INCLUDE_SUSv2( \
3466 " -s Print nothing, only return an exit status")
3467 #define tty_example_usage \
3471 #define tune2fs_trivial_usage \
3472 "[-c max-mounts-count] [-e errors-behavior] [-g group] " \
3473 "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " \
3474 "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " \
3475 "[-r reserved-blocks-count] [-u user] [-C mount-count] " \
3476 "[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \
3477 "[-T last-check-time] [-U UUID] device"
3478 #define tune2fs_full_usage \
3479 "Adjust filesystem options on ext[23] filesystems"
3481 #define udhcpc_trivial_usage \
3482 "[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
3483 #define udhcpc_full_usage \
3484 " -V,--vendorclass=CLASSID Set vendor class identifier\n" \
3485 " -i,--interface=INTERFACE Interface to use (default: eth0)\n" \
3486 " -H,-h,--hostname=HOSTNAME Client hostname\n" \
3487 " -c,--clientid=CLIENTID Set client identifier\n" \
3488 " -C,--clientid-none Suppress default client identifier\n" \
3489 " -p,--pidfile=file Store process ID of daemon in file\n" \
3490 " -r,--request=IP IP address to request (default: none)\n" \
3491 " -s,--script=file Run file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \
3492 " -t,--retries=NUM Send up to NUM request packets\n"\
3493 " -f,--foreground Do not fork after getting lease\n" \
3494 " -b,--background Fork to background if lease cannot be immediately negotiated\n" \
3495 " -n,--now Exit with failure if lease cannot be immediately negotiated\n" \
3496 " -q,--quit Quit after obtaining lease\n" \
3497 " -R,--release Release IP on quit\n" \
3498 " -v,--version Display version" \
3500 #define udhcpd_trivial_usage \
3503 #define udhcpd_full_usage \
3506 #define umount_trivial_usage \
3507 "[flags] FILESYSTEM|DIRECTORY"
3508 #define umount_full_usage \
3509 "Unmount file systems" \
3511 USE_FEATURE_UMOUNT_ALL( \
3512 "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab")) \
3513 USE_FEATURE_MTAB_SUPPORT( \
3514 "\n -n Don't erase /etc/mtab entries") \
3515 "\n -r Try to remount devices as read-only if mount is busy" \
3516 "\n -l Lazy umount (detach filesystem)" \
3517 "\n -f Force umount (i.e., unreachable NFS server)" \
3518 USE_FEATURE_MOUNT_LOOP( \
3519 "\n -D Do not free loop device (if a loop device has been used)")
3520 #define umount_example_usage \
3521 "$ umount /dev/hdc1\n"
3523 #define uname_trivial_usage \
3525 #define uname_full_usage \
3526 "Print certain system information. With no OPTION, same as -s." \
3528 " -a Print all information\n" \
3529 " -m The machine (hardware) type\n" \
3530 " -n Print the machine's network node hostname\n" \
3531 " -r Print the operating system release\n" \
3532 " -s Print the operating system name\n" \
3533 " -p Print the host processor type\n" \
3534 " -v Print the operating system version"
3535 #define uname_example_usage \
3537 "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
3539 #define uncompress_trivial_usage \
3540 "[-c] [-f] [ name ... ]"
3541 #define uncompress_full_usage \
3542 "Uncompress .Z file[s]" \
3544 " -c Extract to stdout\n" \
3545 " -f Force overwrite an existing file"
3547 #define uniq_trivial_usage \
3548 "[-fscdu]... [INPUT [OUTPUT]]"
3549 #define uniq_full_usage \
3550 "Discard all but one of successive identical lines from INPUT\n" \
3551 "(or standard input), writing to OUTPUT (or standard output)" \
3553 " -c Prefix lines by the number of occurrences\n" \
3554 " -d Only print duplicate lines\n" \
3555 " -u Only print unique lines\n" \
3556 " -f N Skip the first N fields\n" \
3557 " -s N Skip the first N chars (after any skipped fields)"
3558 #define uniq_example_usage \
3559 "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
3564 #define unix2dos_trivial_usage \
3566 #define unix2dos_full_usage \
3567 "Convert FILE from unix format to dos format. When no option\n" \
3568 "is given, the input is converted to the opposite output format.\n" \
3569 "When no file is given, use stdin/stdout." \
3571 " -u Output will be in UNIX format\n" \
3572 " -d Output will be in DOS format"
3574 #define unzip_trivial_usage \
3575 "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
3576 #define unzip_full_usage \
3577 "Extract files from ZIP archives" \
3579 " -l List archive contents (short form)\n" \
3580 " -n Never overwrite existing files (default)\n" \
3581 " -o Overwrite files without prompting\n" \
3582 " -p Send output to stdout\n" \
3584 " -x Exclude these files\n" \
3585 " -d Extract files into this directory"
3587 #define uptime_trivial_usage \
3589 #define uptime_full_usage \
3590 "Display the time since the last boot"
3591 #define uptime_example_usage \
3593 " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
3595 #define usleep_trivial_usage \
3597 #define usleep_full_usage \
3598 "Pause for N microseconds"
3599 #define usleep_example_usage \
3600 "$ usleep 1000000\n" \
3601 "[pauses for 1 second]\n"
3603 #define uudecode_trivial_usage \
3605 #define uudecode_full_usage \
3608 " -o FILE Direct output to FILE"
3609 #define uudecode_example_usage \
3610 "$ uudecode -o busybox busybox.uu\n" \
3611 "$ ls -l busybox\n" \
3612 "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
3614 #define uuencode_trivial_usage \
3615 "[OPTION] [INFILE] REMOTEFILE"
3616 #define uuencode_full_usage \
3619 " -m Use base64 encoding per RFC1521"
3620 #define uuencode_example_usage \
3621 "$ uuencode busybox busybox\n" \
3622 "begin 755 busybox\n" \
3623 "<encoded file snipped>\n" \
3624 "$ uudecode busybox busybox > busybox.uu\n" \
3627 #define vconfig_trivial_usage \
3628 "COMMAND [OPTIONS] ..."
3629 #define vconfig_full_usage \
3630 "Create and remove virtual ethernet devices" \
3632 " add [interface-name] [vlan_id]\n" \
3633 " rem [vlan-name]\n" \
3634 " set_flag [interface-name] [flag-num] [0 | 1]\n" \
3635 " set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
3636 " set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
3637 " set_name_type [name-type]"
3639 #define vi_trivial_usage \
3640 "[OPTION] [FILE]..."
3641 #define vi_full_usage \
3644 " -R Read-only - do not write to the file"
3646 #define vlock_trivial_usage \
3648 #define vlock_full_usage \
3649 "Lock a virtual terminal. A password is required to unlock." \
3653 #define watch_trivial_usage \
3654 "[-n <seconds>] [-t] COMMAND..."
3655 #define watch_full_usage \
3656 "Execute a program periodically" \
3658 " -n Loop period in seconds - default is 2\n" \
3659 " -t Don't print header"
3660 #define watch_example_usage \
3662 "Mon Dec 17 10:31:40 GMT 2000\n" \
3663 "Mon Dec 17 10:31:42 GMT 2000\n" \
3664 "Mon Dec 17 10:31:44 GMT 2000"
3666 #define watchdog_trivial_usage \
3667 "[-t <seconds>] [-F] DEV"
3668 #define watchdog_full_usage \
3669 "Periodically write to watchdog device DEV" \
3671 " -t Timer period in seconds - default is 30\n" \
3672 " -F Stay in the foreground and don't fork"
3674 #define wc_trivial_usage \
3675 "[OPTION]... [FILE]..."
3676 #define wc_full_usage \
3677 "Print line, word, and byte counts for each FILE, and a total line if\n" \
3678 "more than one FILE is specified. With no FILE, read standard input." \
3680 " -c Print the byte counts\n" \
3681 " -l Print the newline counts\n" \
3682 " -L Print the length of the longest line\n" \
3683 " -w Print the word counts"
3684 #define wc_example_usage \
3685 "$ wc /etc/passwd\n" \
3686 " 31 46 1365 /etc/passwd\n"
3688 #define wget_trivial_usage \
3689 "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document file]\n" \
3690 " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
3691 " [-U|--user-agent agent] url"
3692 #define wget_full_usage \
3693 "Retrieve files via HTTP or FTP" \
3695 " -s Spider mode - only check file existence\n" \
3696 " -c Continue retrieval of aborted transfer\n" \
3698 " -P Set directory prefix to DIR\n" \
3699 " -O Save to filename ('-' for stdout)\n" \
3700 " -U Adjust 'User-Agent' field\n" \
3701 " -Y Use proxy ('on' or 'off')"
3703 #define which_trivial_usage \
3705 #define which_full_usage \
3707 #define which_example_usage \
3711 #define who_trivial_usage \
3713 #define who_full_usage \
3714 "Print the current user names and related information"
3716 #define whoami_trivial_usage \
3718 #define whoami_full_usage \
3719 "Print the user name associated with the current effective user id"
3721 #define xargs_trivial_usage \
3722 "[OPTIONS] [COMMAND] [ARGS...]"
3723 #define xargs_full_usage \
3724 "Execute COMMAND on every item given by standard input" \
3726 USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
3727 " -p Prompt the user about whether to run each command\n") \
3728 " -r Do not run command for empty read lines\n" \
3729 USE_FEATURE_XARGS_SUPPORT_TERMOPT( \
3730 " -x Exit if the size is exceeded\n") \
3731 USE_FEATURE_XARGS_SUPPORT_ZERO_TERM( \
3732 " -0 Input filenames are terminated by a null character\n") \
3733 " -t Print the command line on stderr before executing it"
3734 #define xargs_example_usage \
3735 "$ ls | xargs gzip\n" \
3736 "$ find . -name '*.c' -print | xargs rm\n"
3738 #define yes_trivial_usage \
3739 "[OPTION]... [STRING]..."
3740 #define yes_full_usage \
3741 "Repeatedly output a line with all specified STRING(s), or 'y'"
3743 #define zcat_trivial_usage \
3745 #define zcat_full_usage \
3746 "Uncompress to stdout"
3748 #define zcip_trivial_usage \
3749 "[OPTIONS] ifname script"
3750 #define zcip_full_usage \
3751 "Manage a ZeroConf IPv4 link-local address" \
3753 " -f Foreground mode\n" \
3754 " -q Quit after address (no daemon)\n" \
3755 " -r 169.254.x.x Request this address first\n" \
3758 #endif /* __BB_USAGE_H__ */
projects / oweals / busybox.git / blob