1 #define addgroup_trivial_usage \
2 "[OPTIONS] group_name [user_name]"
3 #define addgroup_full_usage \
4 "Adds a group to the system" \
6 "\t-g\t\tspecify gid\n"
8 #define adduser_trivial_usage \
10 #define adduser_full_usage \
11 "Adds a user to the system" \
13 "\t-h\t\thome directory\n" \
15 "\t-g\t\tGECOS string\n"
17 #define adjtimex_trivial_usage \
18 "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
19 #define adjtimex_full_usage \
20 "Reads and optionally sets system timebase parameters.\n" \
21 "See adjtimex(2).\n\n" \
23 "\t-q\t\tquiet mode - do not print\n" \
24 "\t-o offset\ttime offset, microseconds\n" \
25 "\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \
26 "\t\t\t(positive values make the system clock run fast)\n" \
27 "\t-t tick\t\tmicroseconds per tick, usually 10000\n" \
30 #define ar_trivial_usage \
31 "-[ov][ptx] ARCHIVE FILES"
32 #define ar_full_usage \
33 "Extract or list FILES from an ar archive.\n\n" \
35 "\t-o\t\tpreserve original dates\n" \
36 "\t-p\t\textract to stdout\n" \
39 "\t-v\t\tverbosely list files processed\n"
41 #define arping_trivial_usage \
42 "[-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target\n"
43 #define arping_full_usage \
44 "Ping hosts by ARP requests/replies.\n\n" \
46 "\t-f\t\tQuit on first ARP reply\n" \
47 "\t-q\t\tBe quiet\n" \
48 "\t-b\t\tKeep broadcasting, don't go unicast\n" \
49 "\t-D\t\tDuplicated address detection mode\n" \
50 "\t-U\t\tUnsolicited ARP mode, update your neighbours\n" \
51 "\t-A\t\tARP answer mode, update your neighbours\n" \
52 "\t-c count\tStop after sending count ARP request packets\n" \
53 "\t-w timeout\tTime to wait for ARP reply, in seconds\n" \
54 "\t-I device\tOutgoing interface name, default is eth0\n" \
55 "\t-s sender\tSet specific sender IP address\n" \
56 "\ttarget\t\tTarget IP address of ARP request\n"
58 #define awk_trivial_usage \
59 "[-v var=val][-F sep] { -f progname | 'programtext' } [FILE ...]"
60 #define awk_full_usage \
62 "\t-v var=val\tassign value 'val' to variable 'var'\n" \
63 "\t-F sep\t\tuse 'sep' as field separator\n" \
64 "\t-f progname\tread program source from file 'progname'\n"
66 #define basename_trivial_usage \
68 #define basename_full_usage \
69 "Strips directory path and suffixes from FILE.\n" \
70 "If specified, also removes any trailing SUFFIX."
71 #define basename_example_usage \
72 "$ basename /usr/local/bin/foo\n" \
74 "$ basename /usr/local/bin/\n" \
76 "$ basename /foo/bar.txt .txt\n" \
79 #define bunzip2_trivial_usage \
81 #define bunzip2_full_usage \
82 "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \
84 "\t-c\tWrite output to standard output\n" \
87 #define bzcat_trivial_usage \
89 #define bzcat_full_usage \
90 "Uncompress to stdout."
92 #define cal_trivial_usage \
93 "[-jy] [[month] year]"
94 #define cal_full_usage \
95 "Display a calendar.\n" \
97 "\t-j\tUse julian dates.\n" \
98 "\t-y\tDisplay the entire year."
100 #define cat_trivial_usage \
102 #define cat_full_usage \
103 "Concatenates FILE(s) and prints them to stdout.\n\n" \
105 "\t-u\tignored since unbuffered i/o is always used"
106 #define cat_example_usage \
107 "$ cat /proc/uptime\n" \
110 #define chgrp_trivial_usage \
111 "[OPTION]... GROUP FILE..."
112 #define chgrp_full_usage \
113 "Change the group membership of each FILE to GROUP.\n" \
115 "\t-R\tChanges files and directories recursively."
116 #define chgrp_example_usage \
117 "$ ls -l /tmp/foo\n" \
118 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
119 "$ chgrp root /tmp/foo\n" \
120 "$ ls -l /tmp/foo\n" \
121 "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
123 #define chmod_trivial_usage \
124 "[-R] MODE[,MODE]... FILE..."
125 #define chmod_full_usage \
126 "Each MODE is one or more of the letters ugoa, one of the\n" \
127 "symbols +-= and one or more of the letters rwxst.\n\n" \
129 "\t-R\tChanges files and directories recursively."
130 #define chmod_example_usage \
131 "$ ls -l /tmp/foo\n" \
132 "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
133 "$ chmod u+x /tmp/foo\n" \
134 "$ ls -l /tmp/foo\n" \
135 "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
136 "$ chmod 444 /tmp/foo\n" \
137 "$ ls -l /tmp/foo\n" \
138 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
140 #define chown_trivial_usage \
141 "[ -Rh ]... OWNER[<.|:>[GROUP]] FILE..."
142 #define chown_full_usage \
143 "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \
145 "\t-R\tChanges files and directories recursively.\n" \
146 "\t-h\tDo not dereference symbolic links."
147 #define chown_example_usage \
148 "$ ls -l /tmp/foo\n" \
149 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
150 "$ chown root /tmp/foo\n" \
151 "$ ls -l /tmp/foo\n" \
152 "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
153 "$ chown root.root /tmp/foo\n" \
155 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
157 #define chroot_trivial_usage \
158 "NEWROOT [COMMAND...]"
159 #define chroot_full_usage \
160 "Run COMMAND with root directory set to NEWROOT."
161 #define chroot_example_usage \
162 "$ ls -l /bin/ls\n" \
163 "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
164 "$ mount /dev/hdc1 /mnt -t minix\n" \
166 "$ ls -l /bin/ls\n" \
167 "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
169 #define chvt_trivial_usage \
171 #define chvt_full_usage \
172 "Changes the foreground virtual terminal to /dev/ttyN"
174 #define clear_trivial_usage \
176 #define clear_full_usage \
179 #define cmp_trivial_usage \
180 "[OPTION]... FILE1 [FILE2]"
181 #define cmp_full_usage \
182 "Compare files.\n\n" \
184 "\t-l\tWrite the byte numbers (decimal) and values (octal)\n" \
185 "\t\t for all differing bytes.\n" \
186 "\t-s\tquiet mode - do not print"
188 #define cp_trivial_usage \
189 "[OPTION]... SOURCE DEST"
190 #define cp_full_usage \
191 "Copies SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" \
193 "\t-a\tSame as -dpR\n" \
194 "\t-d\tPreserves links\n" \
195 "\t-p\tPreserves file attributes if possible\n" \
196 "\t-f\tforce (implied; ignored) - always set\n" \
197 "\t-R\tCopies directories recursively"
199 #define cpio_trivial_usage \
200 "-[dimtuv][F cpiofile]"
201 #define cpio_full_usage \
202 "Extract or list files from a cpio archive\n" \
203 "Main operation mode:\n" \
204 "\td\t\tmake leading directories\n" \
206 "\tm\t\tpreserve mtime\n" \
208 "\tu\t\tunconditional overwrite\n" \
209 "\tF\t\tinput from file"
211 #define crond_trivial_usage \
212 "-d[#] -c <crondir> -f -b"
213 #define crond_full_usage \
214 "\t-d [#] -l [#] -S -L logfile -f -b -c dir\n" \
215 "\t-d num\tdebug level\n" \
216 "\t-l num\tlog level (8 - default)\n" \
217 "\t-S\tlog to syslod (defualt)\n" \
218 "\t-L file\tlog to file\n" \
219 "\t-f\trun in fordeground\n" \
220 "\t-b\trun in background (default)\n" \
221 "\t-c dir\tworking dir"
223 #define crontab_trivial_usage \
224 "crontab [-c dir] {file|-}|[-u|-l|-e|-d user]"
225 #define crontab_full_usage \
226 "\tfile <opts> replace crontab from file\n" \
227 "\t- <opts> replace crontab from stdin\n" \
228 "\t-u user specify user\n" \
229 "\t-l [user] list crontab for user\n" \
230 "\t-e [user] edit crontab for user\n" \
231 "\t-d [user] delete crontab for user\n" \
232 "\t-c dir specify crontab directory"
235 #define cut_trivial_usage \
236 "[OPTION]... [FILE]..."
237 #define cut_full_usage \
238 "Prints selected fields from each input FILE to standard output.\n\n" \
240 "\t-b LIST\t\tOutput only bytes from LIST\n" \
241 "\t-c LIST\t\tOutput only characters from LIST\n" \
242 "\t-d CHAR\t\tUse CHAR instead of tab as the field delimiter\n" \
243 "\t-s\t\tOutput only the lines containing delimiter\n" \
244 "\t-f N\t\tPrint only these fields\n" \
246 #define cut_example_usage \
247 "$ echo "Hello world" | cut -f 1 -d ' '\n" \
249 "$ echo "Hello world" | cut -f 2 -d ' '\n" \
252 #define date_trivial_usage \
253 "[OPTION]... [+FORMAT]"
254 #define date_full_usage \
255 "Displays the current time in the given FORMAT, or sets the system date.\n" \
257 "\t-R\t\tOutputs RFC-822 compliant date string\n" \
258 "\t-d STRING\tdisplay time described by STRING, not `now'\n" \
259 "\t-s\t\tSets time described by STRING\n" \
260 "\t-u\t\tPrints or sets Coordinated Universal Time"
261 #define date_example_usage \
263 "Wed Apr 12 18:52:41 MDT 2000\n"
265 #define dc_trivial_usage \
267 #define dc_full_usage \
268 "This is a Tiny RPN calculator that understands the\n" \
269 "following operations: +, -, /, *, and, or, not, eor.\n" \
270 "i.e., 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16" \
271 "p - Prints the value on the top of the stack, without altering the stack.\n" \
272 "f - Prints the entire contents of the stack without altering anything.\n" \
273 "o - Pops the value off the top of the stack and uses it to set the output radix.\n" \
274 " Only 10 and 16 are supported.\n"
276 #define dc_example_usage \
279 "$ dc 8 8 * 2 2 + /\n" \
285 "$ echo 72 9 div 8 mul | dc\n" \
288 #define dd_trivial_usage \
289 "[if=FILE] [of=FILE] [bs=N] [count=N] [skip=N]\n" \
290 "\t [seek=N] [conv=notrunc|noerror|sync]"
291 #define dd_full_usage \
292 "Copy a file, converting and formatting according to options\n\n" \
293 "\tif=FILE\t\tread from FILE instead of stdin\n" \
294 "\tof=FILE\t\twrite to FILE instead of stdout\n" \
295 "\tbs=N\t\tread and write N bytes at a time\n" \
296 "\tcount=N\t\tcopy only N input blocks\n" \
297 "\tskip=N\t\tskip N input blocks\n" \
298 "\tseek=N\t\tskip N output blocks\n" \
299 "\tconv=notrunc\tdon't truncate output file\n" \
300 "\tconv=noerror\tcontinue after read errors\n" \
301 "\tconv=sync\tpad blocks with zeros\n" \
303 "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
304 "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)."
305 #define dd_example_usage \
306 "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
310 #define deallocvt_trivial_usage \
312 #define deallocvt_full_usage \
313 "Deallocate unused virtual terminal /dev/ttyN"
315 #define delgroup_trivial_usage \
317 #define delgroup_full_usage \
318 "Deletes group GROUP from the system"
320 #define deluser_trivial_usage \
322 #define deluser_full_usage \
323 "Deletes user USER from the system"
325 #ifdef CONFIG_FEATURE_HUMAN_READABLE
326 #define USAGE_HUMAN_READABLE(a) a
327 #define USAGE_NOT_HUMAN_READABLE(a)
329 #define USAGE_HUMAN_READABLE(a)
330 #define USAGE_NOT_HUMAN_READABLE(a) a
332 #define df_trivial_usage \
333 "[-" USAGE_HUMAN_READABLE("hm") USAGE_NOT_HUMAN_READABLE("") "k] [FILESYSTEM ...]"
334 #define df_full_usage \
335 "Print the filesystem space used and space available.\n\n" \
337 USAGE_HUMAN_READABLE( \
338 "\n\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
339 "\t-m\tprint sizes in megabytes\n" \
340 "\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \
341 "\n\t-k\tprint sizes in kilobytes(compatibility)")
342 #define df_example_usage \
344 "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
345 "/dev/sda3 8690864 8553540 137324 98% /\n" \
346 "/dev/sda1 64216 36364 27852 57% /boot\n" \
348 "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
349 "/dev/sda3 8690864 8553540 137324 98% /\n"
351 #define dirname_trivial_usage \
353 #define dirname_full_usage \
354 "Strips non-directory suffix from FILENAME"
355 #define dirname_example_usage \
356 "$ dirname /tmp/foo\n" \
358 "$ dirname /tmp/foo/\n" \
361 #define dmesg_trivial_usage \
362 "[-c] [-n LEVEL] [-s SIZE]"
363 #define dmesg_full_usage \
364 "Prints or controls the kernel ring buffer\n\n" \
366 "\t-c\t\tClears the ring buffer's contents after printing\n" \
367 "\t-n LEVEL\tSets console logging level\n" \
368 "\t-s SIZE\t\tUse a buffer of size SIZE"
370 #define dos2unix_trivial_usage \
372 #define dos2unix_full_usage \
373 "Converts FILE from dos format to unix format. When no option\n" \
374 "is given, the input is converted to the opposite output format.\n" \
375 "When no file is given, uses stdin for input and stdout for output.\n\n" \
377 "\t-u\toutput will be in UNIX format\n" \
378 "\t-d\toutput will be in DOS format"
380 #define dpkg_trivial_usage \
381 "-i package_file\n" \
382 "[-CPru] package_name"
383 #define dpkg_full_usage \
384 "\t-i\tInstall the package\n" \
385 "\t-C\tConfigure an unpackaged package\n" \
386 "\t-P\tPurge all files of a package\n" \
387 "\t-r\tRemove all but the configuration files for a package\n" \
388 "\t-u\tUnpack a package, but dont configure it\n"
390 #define dpkg_deb_trivial_usage \
391 "[-cefItxX] FILE [argument]"
392 #define dpkg_deb_full_usage \
393 "Perform actions on debian packages (.debs)\n\n" \
395 "\t-c\tList contents of filesystem tree\n" \
396 "\t-e\tExtract control files to [argument] directory\n" \
397 "\t-f\tDisplay control field name starting with [argument]\n" \
398 "\t-I\tDisplay the control filenamed [argument]\n" \
399 "\t-t\tExtract filesystem tree to stdout in tar format\n" \
400 "\t-x\tExtract packages filesystem tree to directory\n" \
401 "\t-X\tVerbose extract"
402 #define dpkg_deb_example_usage \
403 "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
405 #ifdef CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K
406 #define USAGE_DU_DEFALT_BLOCKSIZE_1k(a) a
407 #define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a)
409 #define USAGE_DU_DEFALT_BLOCKSIZE_1k(a)
410 #define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a) a
413 #define du_trivial_usage \
414 "[-aHLdclsx" USAGE_HUMAN_READABLE("hm") "k] [FILE]..."
415 #define du_full_usage \
416 "Summarizes disk space used for each FILE and/or directory.\n" \
417 "Disk space is printed in units of " \
418 USAGE_DU_DEFALT_BLOCKSIZE_1k("1024") USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k("512") \
421 "\t-a\tshow sizes of files in addition to directories\n" \
422 "\t-H\tfollow symbolic links that are FILE command line args\n" \
423 "\t-L\tfollow all symbolic links encountered\n" \
424 "\t-d N\tlimit output to directories (and files with -a) of depth < N\n" \
425 "\t-c\toutput a grand total\n" \
426 "\t-l\tcount sizes many times if hard linked\n" \
427 "\t-s\tdisplay only a total for each argument\n" \
428 "\t-x\tskip directories on different filesystems\n" \
429 USAGE_HUMAN_READABLE( \
430 "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
431 "\t-m\tprint sizes in megabytes\n" ) \
432 "\t-k\tprint sizes in kilobytes" USAGE_DU_DEFALT_BLOCKSIZE_1k("(default)")
433 #define du_example_usage \
436 "12 ./kernel-patches/CVS\n" \
437 "80 ./kernel-patches\n" \
440 "12 ./scripts/CVS\n" \
446 #define dumpkmap_trivial_usage \
448 #define dumpkmap_full_usage \
449 "Prints out a binary keyboard translation table to standard output."
450 #define dumpkmap_example_usage \
451 "$ dumpkmap > keymap\n"
453 #define dumpleases_trivial_usage \
454 "[-r|-a] [-f LEASEFILE]"
455 #define dumpleases_full_usage \
456 "\t-f,\t--file=FILENAME\tLeases file to load\n" \
457 "\t-r,\t--remaining\tInterepret lease times as time remaing\n" \
458 "\t-a,\t--absolute\tInterepret lease times as expire time\n"
460 #define dutmp_trivial_usage \
462 #define dutmp_full_usage \
463 "Dump utmp file format (pipe delimited) from FILE\n" \
464 "or stdin to stdout. (i.e., 'dutmp /var/run/utmp')"
465 #define dutmp_example_usage \
466 "$ dutmp /var/run/utmp\n" \
467 "8|7||si|||0|0|0|955637625|760097|0\n" \
468 "2|0|~|~~|reboot||0|0|0|955637625|782235|0\n" \
469 "1|20020|~|~~|runlevel||0|0|0|955637625|800089|0\n" \
470 "8|125||l4|||0|0|0|955637629|998367|0\n" \
471 "6|245|tty1|1|LOGIN||0|0|0|955637630|998974|0\n" \
472 "6|246|tty2|2|LOGIN||0|0|0|955637630|999498|0\n" \
473 "7|336|pts/0|vt00|andersen|:0.0|0|0|0|955637763|0|0\n"
475 #ifdef CONFIG_FEATURE_FANCY_ECHO
476 #define USAGE_FANCY_ECHO(a) a
478 #define USAGE_FANCY_ECHO(a)
481 #define echo_trivial_usage \
482 USAGE_FANCY_ECHO("[-neE] ") "[ARG ...]"
483 #define echo_full_usage \
484 "Prints the specified ARGs to stdout\n\n" \
485 USAGE_FANCY_ECHO("Options:\n" \
486 "\t-n\tsuppress trailing newline\n" \
487 "\t-e\tinterpret backslash-escaped characters (i.e., \\t=tab)\n" \
488 "\t-E\tdisable interpretation of backslash-escaped characters")
489 #define echo_example_usage \
490 "$ echo "Erik is cool"\n" \
492 USAGE_FANCY_ECHO("$ echo -e "Erik\\nis\\ncool"\n" \
496 "$ echo "Erik\\nis\\ncool"\n" \
497 "Erik\\nis\\ncool\n")
499 #define env_trivial_usage \
500 "[-iu] [-] [name=value]... [command]"
501 #define env_full_usage \
502 "Prints the current environment or runs a program after setting\n" \
503 "up the specified environment.\n\n" \
505 "\t-, -i\tstart with an empty environment\n" \
506 "\t-u\tremove variable from the environment\n"
508 #define expr_trivial_usage \
510 #define expr_full_usage \
511 "Prints the value of EXPRESSION to standard output.\n\n" \
512 "EXPRESSION may be:\n" \
513 "\tARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
514 "\tARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
515 "\tARG1 < ARG2 ARG1 is less than ARG2\n" \
516 "\tARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \
517 "\tARG1 = ARG2 ARG1 is equal to ARG2\n" \
518 "\tARG1 != ARG2 ARG1 is unequal to ARG2\n" \
519 "\tARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \
520 "\tARG1 > ARG2 ARG1 is greater than ARG2\n" \
521 "\tARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" \
522 "\tARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" \
523 "\tARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" \
524 "\tARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" \
525 "\tARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" \
526 "\tSTRING : REGEXP anchored pattern match of REGEXP in STRING\n" \
527 "\tmatch STRING REGEXP same as STRING : REGEXP\n" \
528 "\tsubstr STRING POS LENGTH substring of STRING, POS counted from 1\n" \
529 "\tindex STRING CHARS index in STRING where any CHARS is found,\n" \
531 "\tlength STRING length of STRING\n" \
532 "\tquote TOKEN interpret TOKEN as a string, even if\n" \
533 "\t it is a keyword like `match' or an\n" \
534 "\t operator like `/'\n" \
535 "\t( EXPRESSION ) value of EXPRESSION\n\n" \
536 "Beware that many operators need to be escaped or quoted for shells.\n" \
537 "Comparisons are arithmetic if both ARGs are numbers, else\n" \
538 "lexicographical. Pattern matches return the string matched between \n" \
539 "\\( and \\) or null; if \\( and \\) are not used, they return the number \n" \
540 "of characters matched or 0."
542 #define false_trivial_usage \
544 #define false_full_usage \
545 "Return an exit code of FALSE (1)."
546 #define false_example_usage \
551 #define fbset_trivial_usage \
553 #define fbset_full_usage \
554 "Show and modify frame buffer settings"
555 #define fbset_example_usage \
557 "mode "1024x768-76"\n" \
558 "\t# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
559 "\tgeometry 1024 768 1024 768 16\n" \
560 "\ttimings 12714 128 32 16 4 128 4\n" \
562 "\trgba 5/11,6/5,5/0,0/0\n" \
565 #define fdflush_trivial_usage \
567 #define fdflush_full_usage \
568 "Forces floppy disk drive to detect disk change"
570 #define fdisk_trivial_usage \
571 "[-l] [-v] [-b SSZ] [-u] DISK"
572 #define fdisk_full_usage \
573 "Change partition table\n" \
575 "-l List partition table(s)\n" \
576 "-u Give Start and End in sector (instead of cylinder) units\n" \
577 "-s PARTITION Give partition size(s) in blocks\n" \
578 "-b 2048: (for certain MO disks) use 2048-byte sectors\n" \
579 "-v Give fdisk version"
581 #ifdef CONFIG_FEATURE_FIND_TYPE
582 #define USAGE_FIND_TYPE(a) a
584 #define USAGE_FIND_TYPE(a)
586 #ifdef CONFIG_FEATURE_FIND_PERM
587 #define USAGE_FIND_PERM(a) a
589 #define USAGE_FIND_PERM(a)
591 #ifdef CONFIG_FEATURE_FIND_MTIME
592 #define USAGE_FIND_MTIME(a) a
594 #define USAGE_FIND_MTIME(a)
596 #ifdef CONFIG_FEATURE_FIND_NEWER
597 #define USAGE_FIND_NEWER(a) a
599 #define USAGE_FIND_NEWER(a)
601 #ifdef CONFIG_FEATURE_FIND_INUM
602 #define USAGE_FIND_INUM(a) a
604 #define USAGE_FIND_INUM(a)
607 #define find_trivial_usage \
608 "[PATH...] [EXPRESSION]"
609 #define find_full_usage \
610 "Search for files in a directory hierarchy. The default PATH is\n" \
611 "the current directory; default EXPRESSION is '-print'\n" \
612 "\nEXPRESSION may consist of:\n" \
613 "\t-follow\t\tDereference symbolic links.\n" \
614 "\t-name PATTERN\tFile name (leading directories removed) matches PATTERN.\n" \
615 "\t-print\t\tPrint (default and assumed).\n" \
617 "\n\t-type X\t\tFiletype matches X (where X is one of: f,d,l,b,c,...)" \
619 "\n\t-perm PERMS\tPermissions match any of (+NNN); all of (-NNN);\n\t\t\tor exactly (NNN)" \
620 ) USAGE_FIND_MTIME( \
621 "\n\t-mtime TIME\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) days" \
622 ) USAGE_FIND_NEWER( \
623 "\n\t-newer FILE\tModified time is more recent than FILE's" \
625 "\n\t-inum N\t\tFile has inode number N")
626 #define find_example_usage \
627 "$ find / -name /etc/passwd\n" \
630 #define free_trivial_usage \
632 #define free_full_usage \
633 "Displays the amount of free and used system memory"
634 #define free_example_usage \
636 " total used free shared buffers\n" \
637 " Mem: 257628 248724 8904 59644 93124\n" \
638 " Swap: 128516 8404 120112\n" \
639 "Total: 386144 257128 129016\n" \
641 #define freeramdisk_trivial_usage \
643 #define freeramdisk_full_usage \
644 "Frees all memory used by the specified ramdisk."
645 #define freeramdisk_example_usage \
646 "$ freeramdisk /dev/ram2\n"
648 #define fsck_minix_trivial_usage \
649 "[-larvsmf] /dev/name"
650 #define fsck_minix_full_usage \
651 "Performs a consistency check for MINIX filesystems.\n\n" \
653 "\t-l\tLists all filenames\n" \
654 "\t-r\tPerform interactive repairs\n" \
655 "\t-a\tPerform automatic repairs\n" \
657 "\t-s\tOutputs super-block information\n" \
658 "\t-m\tActivates MINIX-like \"mode not cleared\" warnings\n" \
659 "\t-f\tForce file system check."
661 #define ftpget_trivial_usage \
662 "[options] remote-host local-directory remote-file"
663 #define ftpget_full_usage \
664 "Retrieve a remote file via FTP.\n\n" \
666 "\t-c, --continue Continue a previous transfer\n" \
667 "\t-v, --verbose Verbose\n" \
668 "\t-u, --username Username to be used\n" \
669 "\t-p, --password Password to be used\n" \
670 "\t-P, --port Port number to be used\n"
672 #define ftpput_trivial_usage \
673 "[options] remote-host remote-directory local-file"
674 #define ftpput_full_usage \
675 "Store a local file on a remote machine via FTP.\n\n" \
677 "\t-v, --verbose Verbose\n" \
678 "\t-u, --username Username to be used\n" \
679 "\t-p, --password Password to be used\n" \
680 "\t-P, --port Port number to be used\n"
682 #define getopt_trivial_usage \
684 #define getopt_full_usage \
685 "Parse command options\n" \
686 "\t-a, --alternative Allow long options starting with single -\n" \
687 "\t-l, --longoptions=longopts Long options to be recognized\n" \
688 "\t-n, --name=progname The name under which errors are reported\n" \
689 "\t-o, --options=optstring Short options to be recognized\n" \
690 "\t-q, --quiet Disable error reporting by getopt(3)\n" \
691 "\t-Q, --quiet-output No normal output\n" \
692 "\t-s, --shell=shell Set shell quoting conventions\n" \
693 "\t-T, --test Test for getopt(1) version\n" \
694 "\t-u, --unqote Do not quote the output"
695 #define getopt_example_usage \
696 "$ cat getopt.test\n" \
698 "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
699 " -n 'example.busybox' -- "$@"`\n" \
700 "if [ $? != 0 ] ; then exit 1 ; fi\n" \
701 "eval set -- "$GETOPT"\n" \
702 "while true ; do\n" \
704 " -a|--a-long) echo \"Option a\" ; shift ;;\n" \
705 " -b|--b-long) echo \"Option b, argument `$2'\" ; shift 2 ;;\n" \
708 " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \
709 " *) echo \"Option c, argument `$2'\" ; shift 2 ;;\n" \
711 " --) shift ; break ;;\n" \
712 " *) echo \"Internal error!\" ; exit 1 ;;\n" \
716 #define getty_trivial_usage \
717 "getty [OPTIONS]... baud_rate,... line [termtype]"
718 #define getty_full_usage \
719 "\nOpens a tty, prompts for a login name, then invokes /bin/login\n\n" \
721 "\t-h\t\tEnable hardware (RTS/CTS) flow control.\n" \
722 "\t-i\t\tDo not display /etc/issue before running login.\n" \
723 "\t-L\t\tLocal line, so do not do carrier detect.\n" \
724 "\t-m\t\tGet baud rate from modem's CONNECT status message.\n" \
725 "\t-w\t\tWait for a CR or LF before sending /etc/issue.\n" \
726 "\t-l login_app\tInvoke login_app instead of /bin/login.\n" \
727 "\t-t timeout\tTerminate after timeout if no username is read.\n" \
728 "\t-I initstring\tSets the init string to send before anything else.\n" \
729 "\t-H login_host\tLog login_host into the utmp file as the hostname."
732 #define grep_trivial_usage \
733 "[-ihHnqvs] PATTERN [FILEs...]"
734 #define grep_full_usage \
735 "Search for PATTERN in each FILE or standard input.\n\n" \
737 "\t-H\tprefix output lines with filename where match was found\n" \
738 "\t-h\tsuppress the prefixing filename on output\n" \
739 "\t-i\tignore case distinctions\n" \
740 "\t-l\tlist names of files that match\n" \
741 "\t-n\tprint line number with output lines\n" \
742 "\t-q\tbe quiet. Returns 0 if result was found, 1 otherwise\n" \
743 "\t-v\tselect non-matching lines\n" \
744 "\t-s\tsuppress file open/read error messages"
745 #define grep_example_usage \
746 "$ grep root /etc/passwd\n" \
747 "root:x:0:0:root:/root:/bin/bash\n" \
748 "$ grep ^[rR]oo. /etc/passwd\n" \
749 "root:x:0:0:root:/root:/bin/bash\n"
751 #define gunzip_trivial_usage \
753 #define gunzip_full_usage \
754 "Uncompress FILE (or standard input if FILE is '-').\n\n" \
756 "\t-c\tWrite output to standard output\n" \
757 "\t-t\tTest compressed file integrity"
758 #define gunzip_example_usage \
759 "$ ls -la /tmp/BusyBox*\n" \
760 "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
761 "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
762 "$ ls -la /tmp/BusyBox*\n" \
763 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
765 #define gzip_trivial_usage \
766 "[OPTION]... [FILE]..."
767 #define gzip_full_usage \
768 "Compress FILE(s) with maximum compression.\n" \
769 "When FILE is '-' or unspecified, reads standard input. Implies -c.\n\n" \
771 "\t-c\tWrite output to standard output instead of FILE.gz\n" \
773 #define gzip_example_usage \
774 "$ ls -la /tmp/busybox*\n" \
775 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
776 "$ gzip /tmp/busybox.tar\n" \
777 "$ ls -la /tmp/busybox*\n" \
778 "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
780 #define halt_trivial_usage \
782 #define halt_full_usage \
785 #ifdef CONFIG_FEATURE_FANCY_HEAD
786 #define USAGE_FANCY_HEAD(a) a
788 #define USAGE_FANCY_HEAD(a)
791 #define head_trivial_usage \
792 "[OPTION]... [FILE]..."
793 #define head_full_usage \
794 "Print first 10 lines of each FILE to standard output.\n" \
795 "With more than one FILE, precede each with a header giving the\n" \
796 "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
798 "\t-n NUM\t\tPrint first NUM lines instead of first 10" \
800 "\n\t-c NUM\t\toutput the first NUM bytes\n" \
801 "\t-q\t\tnever output headers giving file names\n" \
802 "\t-v\t\talways output headers giving file names" )
803 #define head_example_usage \
804 "$ head -n 2 /etc/passwd\n" \
805 "root:x:0:0:root:/root:/bin/bash\n" \
806 "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
808 #define hexdump_trivial_usage \
809 "[-[bcdefnosvx]] [OPTION] FILE"
810 #define hexdump_full_usage \
811 "The hexdump utility is a filter which displays the specified files,\n" \
812 "or the standard input, if no files are specified, in a user specified\n"\
814 "\t-b\t\tOne-byte octal display\n" \
815 "\t-c\t\tOne-byte character display\n" \
816 "\t-d\t\tTwo-byte decimal display\n" \
817 "\t-e FORMAT STRING\n" \
818 "\t-f FORMAT FILE\n" \
819 "\t-n LENGTH\tInterpret only length bytes of input\n" \
820 "\t-o\t\tTwo-byte octal display\n" \
821 "\t-s OFFSET\tSkip offset byte\n" \
822 "\t-v\t\tdisplay all input data\n" \
823 "\t-x\t\tTwo-byte hexadecimal display\n"
825 #define hostid_trivial_usage \
827 #define hostid_full_usage \
828 "Print out a unique 32-bit identifier for the machine."
830 #define hostname_trivial_usage \
831 "[OPTION] {hostname | -F FILE}"
832 #define hostname_full_usage \
833 "Get or set the hostname or DNS domain name. If a hostname is given\n" \
834 "(or FILE with the -F parameter), the host name will be set.\n\n" \
837 "\t-i\tAddresses for the hostname\n" \
838 "\t-d\tDNS domain name\n" \
839 "\t-f\tFully qualified domain name\n" \
840 "\t-F FILE\tUse the contents of FILE to specify the hostname"
841 #define hostname_example_usage \
844 #ifdef CONFIG_FEATURE_HTTPD_BASIC_AUTH
845 #define USAGE_HTTPD_BASIC_AUTH(a) a
847 #define USAGE_HTTPD_BASIC_AUTH(a)
849 #define httpd_trivial_usage \
850 "[-p <port>] [-d/-e <string>]" USAGE_HTTPD_BASIC_AUTH(" [-c <conf file>] [-r <realm>]")
851 #define httpd_full_usage \
852 "Listens for incoming http server requests.\n"\
854 "\t-p PORT\tServer port (default 80).\n" \
855 USAGE_HTTPD_BASIC_AUTH("\t-c FILE\tSpecifies configuration file. (default httpd.conf)\n\t-r REALM\tAuthentication Realm for Basic Authentication\n") \
856 "\t-e STRING\tHtml encode STRING\n" \
857 "\t-d STRING\tURL decode STRING\n"
858 #define hwclock_trivial_usage \
859 "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
860 #define hwclock_full_usage \
861 "Query and set the hardware clock (RTC)\n\n" \
863 "\t-r\tread hardware clock and print result\n" \
864 "\t-s\tset the system time from the hardware clock\n" \
865 "\t-w\tset the hardware clock to the current system time\n" \
866 "\t-u\tthe hardware clock is kept in coordinated universal time\n" \
867 "\t-l\tthe hardware clock is kept in local time"
869 #define id_trivial_usage \
870 "[OPTIONS]... [USERNAME]"
871 #define id_full_usage \
872 "Print information for USERNAME or the current user\n\n" \
874 "\t-g\tprints only the group ID\n" \
875 "\t-u\tprints only the user ID\n" \
876 "\t-n\tprint a name instead of a number (with for -ug)\n" \
877 "\t-r\tprints the real user ID instead of the effective ID (with -ug)"
878 #define id_example_usage \
880 "uid=1000(andersen) gid=1000(andersen)\n"
882 #ifdef CONFIG_FEATURE_IFCONFIG_SLIP
883 #define USAGE_SIOCSKEEPALIVE(a) a
885 #define USAGE_SIOCSKEEPALIVE(a)
887 #ifdef CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
888 #define USAGE_IFCONFIG_MII(a) a
890 #define USAGE_IFCONFIG_MII(a)
892 #ifdef CONFIG_FEATURE_IFCONFIG_HW
893 #define USAGE_IFCONFIG_HW(a) a
895 #define USAGE_IFCONFIG_HW(a)
897 #ifdef CONFIG_FEATURE_IFCONFIG_STATUS
898 #define USAGE_IFCONFIG_OPT_A(a) a
900 #define USAGE_IFCONFIG_OPT_A(a)
902 #ifdef CONFIG_FEATURE_IPV6
903 #define USAGE_IPV6(a) a
905 #define USAGE_IPV6(a)
908 #define ifconfig_trivial_usage \
909 USAGE_IFCONFIG_OPT_A("[-a]") " <interface> [<address>]"
910 #define ifconfig_full_usage \
911 "configure a network interface\n\n" \
913 USAGE_IPV6("[add <address>[/<prefixlen>]]\n") \
914 USAGE_IPV6("[del <address>[/<prefixlen>]]\n") \
915 "\t[[-]broadcast [<address>]] [[-]pointopoint [<address>]]\n" \
916 "\t[netmask <address>] [dstaddr <address>]\n" \
917 USAGE_SIOCSKEEPALIVE("\t[outfill <NN>] [keepalive <NN>]\n") \
918 "\t" USAGE_IFCONFIG_HW("[hw ether <address>] ") \
919 "[metric <NN>] [mtu <NN>]\n" \
920 "\t[[-]trailers] [[-]arp] [[-]allmulti]\n" \
921 "\t[multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]\n" \
922 USAGE_IFCONFIG_MII("\t[mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \
925 #define ifup_trivial_usage \
926 "<-ahinv> <ifaces...>"
927 #define ifup_full_usage \
928 "Usage: ifup <options> <ifaces...>\n\n" \
930 "\t-h\tthis help\n" \
931 "\t-a\tde/configure all interfaces automatically\n" \
932 "\t-i FILE\tuse FILE for interface definitions\n" \
933 "\t-n\tprint out what would happen, but don't do it\n" \
934 "\t\t\t(note that this option doesn't disable mappings)\n" \
935 "\t-v\tprint out what would happen before doing it\n" \
936 "\t-m\tdon't run any mappings\n" \
937 "\t-f\tforce de/configuration\n"
939 #define ifdown_trivial_usage \
940 "<-ahinv> <ifaces...>"
941 #define ifdown_full_usage \
942 "Usage: ifdown <options> <ifaces...>\n\n" \
944 "\t-h\tthis help\n" \
945 "\t-a\tde/configure all interfaces automatically\n" \
946 "\t-i FILE\tuse FILE for interface definitions\n" \
947 "\t-n\tprint out what would happen, but don't do it\n" \
948 "\t\t(note that this option doesn't disable mappings)\n" \
949 "\t-v\tprint out what would happen before doing it\n" \
950 "\t-m\tdon't run any mappings\n" \
951 "\t-f\tforce de/configuration\n"
953 #define inetd_trivial_usage \
955 #define inetd_full_usage \
956 "Usage: [-q len] [conf]\n\n" \
958 "\t-q\tSets the size of the socket listen queue to\n" \
959 "the specified value. Default is 128."
961 #define init_trivial_usage \
963 #define init_full_usage \
964 "Init is the parent of all processes."
965 #define init_notes_usage \
966 "This version of init is designed to be run only by the kernel.\n" \
968 "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
969 "the /etc/inittab file is completely ignored by BusyBox init. If you want \n" \
970 "runlevels, use sysvinit.\n" \
972 "BusyBox init works just fine without an inittab. If no inittab is found, \n" \
973 "it has the following default behavior:\n" \
975 " ::sysinit:/etc/init.d/rcS\n" \
976 " ::askfirst:/bin/sh\n" \
977 " ::ctrlaltdel:/sbin/reboot\n" \
978 " ::shutdown:/sbin/swapoff -a\n" \
979 " ::shutdown:/bin/umount -a -r\n" \
980 " ::restart:/sbin/init\n" \
982 "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
984 " tty2::askfirst:/bin/sh\n" \
985 " tty3::askfirst:/bin/sh\n" \
986 " tty4::askfirst:/bin/sh\n" \
988 "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
990 " <id>:<runlevels>:<action>:<process>\n" \
994 " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
995 " The id field is used by BusyBox init to specify the controlling tty for\n" \
996 " the specified process to run on. The contents of this field are\n" \
997 " appended to "/dev/" and used as-is. There is no need for this field to\n" \
998 " be unique, although if it isn't you may have strange results. If this\n" \
999 " field is left blank, the controlling tty is set to the console. Also\n" \
1000 " note that if BusyBox detects that a serial console is in use, then only\n" \
1001 " entries whose controlling tty is either the serial console or /dev/null\n" \
1002 " will be run. BusyBox init does nothing with utmp. We don't need no\n" \
1003 " stinkin' utmp.\n" \
1005 " <runlevels>: \n" \
1007 " The runlevels field is completely ignored.\n" \
1011 " Valid actions include: sysinit, respawn, askfirst, wait, \n" \
1012 " once, restart, ctrlaltdel, and shutdown.\n" \
1014 " The available actions can be classified into two groups: actions\n" \
1015 " that are run only once, and actions that are re-run when the specified\n" \
1016 " process exits.\n" \
1018 " Run only-once actions:\n" \
1020 " 'sysinit' is the first item run on boot. init waits until all\n" \
1021 " sysinit actions are completed before continuing. Following the\n" \
1022 " completion of all sysinit actions, all 'wait' actions are run.\n" \
1023 " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
1024 " the specified task completes. 'once' actions are asynchronous,\n" \
1025 " therefore, init does not wait for them to complete. 'restart' is\n" \
1026 " the action taken to restart the init process. By default this should\n" \
1027 " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
1028 " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
1029 " actions are run when the system detects that someone on the system\n" \
1030 " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
1031 " wants to run 'reboot' at this point to cause the system to reboot.\n" \
1032 " Finally the 'shutdown' action specifies the actions to taken when\n" \
1033 " init is told to reboot. Unmounting filesystems and disabling swap\n" \
1034 " is a very good here\n" \
1036 " Run repeatedly actions:\n" \
1038 " 'respawn' actions are run after the 'once' actions. When a process\n" \
1039 " started with a 'respawn' action exits, init automatically restarts\n" \
1040 " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
1041 " respawning out of control. The 'askfirst' actions acts just like\n" \
1042 " respawn, except that before running the specified process it\n" \
1043 " displays the line "Please press Enter to activate this console."\n" \
1044 " and then waits for the user to press enter before starting the\n" \
1045 " specified process. \n" \
1047 " Unrecognized actions (like initdefault) will cause init to emit an\n" \
1048 " error message, and then go along with its business. All actions are\n" \
1049 " run in the order they appear in /etc/inittab.\n" \
1053 " Specifies the process to be executed and it's command line.\n" \
1055 "Example /etc/inittab file:\n" \
1057 " # This is run first except when booting in single-user mode.\n" \
1059 " ::sysinit:/etc/init.d/rcS\n" \
1061 " # /bin/sh invocations on selected ttys\n" \
1063 " # Start an "askfirst" shell on the console (whatever that may be)\n" \
1064 " ::askfirst:-/bin/sh\n" \
1065 " # Start an "askfirst" shell on /dev/tty2-4\n" \
1066 " tty2::askfirst:-/bin/sh\n" \
1067 " tty3::askfirst:-/bin/sh\n" \
1068 " tty4::askfirst:-/bin/sh\n" \
1070 " # /sbin/getty invocations for selected ttys\n" \
1072 " tty4::respawn:/sbin/getty 38400 tty4\n" \
1073 " tty5::respawn:/sbin/getty 38400 tty5\n" \
1076 " # Example of how to put a getty on a serial line (for a terminal)\n" \
1078 " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
1079 " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
1081 " # Example how to put a getty on a modem line.\n" \
1082 " #::respawn:/sbin/getty 57600 ttyS2\n" \
1084 " # Stuff to do when restarting the init process\n" \
1085 " ::restart:/sbin/init\n" \
1087 " # Stuff to do before rebooting\n" \
1088 " ::ctrlaltdel:/sbin/reboot\n" \
1089 " ::shutdown:/bin/umount -a -r\n" \
1090 " ::shutdown:/sbin/swapoff -a\n"
1092 #ifdef CONFIG_FEATURE_INSMOD_LOAD_MAP
1093 #define USAGE_INSMOD_MAP(a) a
1095 #define USAGE_INSMOD_MAP(a)
1097 #define insmod_trivial_usage \
1098 "[OPTION]... MODULE [symbol=value]..."
1099 #define insmod_full_usage \
1100 "Loads the specified kernel modules into the kernel.\n\n" \
1102 "\t-f\tForce module to load into the wrong kernel version.\n" \
1103 "\t-k\tMake module autoclean-able.\n" \
1104 "\t-v\tverbose output\n" \
1105 "\t-L\tLock to prevent simultaneous loads of a module\n" \
1106 USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout") \
1107 "\t-x\tdo not export externs\n"
1109 #define ip_trivial_usage \
1110 "[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }"
1111 #define ip_full_usage \
1112 "ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \
1113 "where OBJECT := { link | addr | route | tunnel }\n" \
1114 "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }\n"
1116 #define ipaddr_trivial_usage \
1117 "{ {add|del} IFADDR dev STRING | {show|flush} [ dev STRING ] [ to PREFIX ] }"
1118 #define ipaddr_full_usage \
1119 "ipaddr {add|del} IFADDR dev STRING\n" \
1120 "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
1121 " [ to PREFIX ] [ label PATTERN ]\n" \
1122 "IFADDR := PREFIX | ADDR peer PREFIX\n" \
1123 " [ broadcast ADDR ] [ anycast ADDR ]\n" \
1124 " [ label STRING ] [ scope SCOPE-ID ]\n" \
1125 "SCOPE-ID := [ host | link | global | NUMBER ]\n"
1127 #ifndef CONFIG_FEATURE_IPCALC_FANCY
1128 # define ipcalc_trivial_usage \
1129 "[--broadcast] [--netmask] [--network] ipaddr <netmask>"
1131 # define ipcalc_full_usage \
1132 "Calculate IP network settings from a IP address\n\n" \
1134 "\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \
1135 "\t-n\t--netmask\tDisplay default netmask for IP.\n" \
1136 "\t-w\t--network\tDisplay calculated network address."
1138 # define ipcalc_trivial_usage \
1139 "[OPTION]... ipaddr <netmask>"
1141 # define ipcalc_full_usage \
1142 "Calculate IP network settings from a IP address\n\n" \
1144 "\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \
1145 "\t-n\t--netmask\tDisplay default netmask for IP.\n" \
1146 "\t-w\t--network\tDisplay calculated network address.\n" \
1147 "\t-h\t--hostname\tDisplay first resolved host name.\n" \
1148 "\t-s\t--silent\tDon't ever display error messages."
1151 #define ipcalc_notes_usage \
1152 "ipcalc provides a simple way to calculate IP information for\n" \
1153 "a host. The various options specify what information ipcalc\n" \
1154 "should display on standard out. Multiple options may be\n" \
1157 #define iplink_trivial_usage \
1158 "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
1159 #define iplink_full_usage \
1160 "iplink set DEVICE { up | down | arp { on | off } |\n" \
1161 " dynamic { on | off } |\n" \
1163 "iplink show [ DEVICE ]\n"
1165 #define iproute_trivial_usage \
1166 "{ list | flush | { add | del | change | append | replace | monitor } ROUTE }"
1167 #define iproute_full_usage \
1168 "iproute { list | flush } SELECTOR\n" \
1169 "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
1170 " [ oif STRING ] [ tos TOS ]\n" \
1171 "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
1172 "SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
1173 "ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]\n"
1175 #define iptunnel_trivial_usage \
1176 "{ add | change | del | show } [ NAME ] [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
1177 #define iptunnel_full_usage \
1178 "iptunnel { add | change | del | show } [ NAME ]\n" \
1179 " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
1180 " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
1181 " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]\n"
1183 #define kill_trivial_usage \
1184 "[-signal] process-id [process-id ...]"
1185 #define kill_full_usage \
1186 "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
1188 "\t-l\tList all signal names and numbers."
1189 #define kill_example_usage \
1190 "$ ps | grep apache\n" \
1191 "252 root root S [apache]\n" \
1192 "263 www-data www-data S [apache]\n" \
1193 "264 www-data www-data S [apache]\n" \
1194 "265 www-data www-data S [apache]\n" \
1195 "266 www-data www-data S [apache]\n" \
1196 "267 www-data www-data S [apache]\n" \
1199 #define killall_trivial_usage \
1200 "[-signal] process-name [process-name ...]"
1201 #define killall_full_usage \
1202 "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
1204 "\t-l\tList all signal names and numbers."
1205 #define killall_example_usage \
1206 "$ killall apache\n"
1208 #define klogd_trivial_usage \
1210 #define klogd_full_usage \
1213 "\t-c n\tSets the default log level of console messages to n.\n"\
1214 "\t-n\tRun as a foreground process."
1216 #define length_trivial_usage \
1218 #define length_full_usage \
1219 "Prints out the length of the specified STRING."
1220 #define length_example_usage \
1221 "$ length Hello\n" \
1224 #define ln_trivial_usage \
1225 "[OPTION] TARGET... LINK_NAME|DIRECTORY"
1226 #define ln_full_usage \
1227 "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n"\
1228 "\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \
1230 "\t-s\tmake symbolic links instead of hard links\n" \
1231 "\t-f\tremove existing destination files\n" \
1232 "\t-n\tno dereference symlinks - treat like normal file"
1233 #define ln_example_usage \
1234 "$ ln -s BusyBox /tmp/ls\n" \
1235 "$ ls -l /tmp/ls\n" \
1236 "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
1238 #define loadacm_trivial_usage \
1240 #define loadacm_full_usage \
1241 "Loads an acm from standard input."
1242 #define loadacm_example_usage \
1243 "$ loadacm < /etc/i18n/acmname\n"
1245 #define loadfont_trivial_usage \
1247 #define loadfont_full_usage \
1248 "Loads a console font from standard input."
1249 #define loadfont_example_usage \
1250 "$ loadfont < /etc/i18n/fontname\n"
1252 #define loadkmap_trivial_usage \
1254 #define loadkmap_full_usage \
1255 "Loads a binary keyboard translation table from standard input."
1256 #define loadkmap_example_usage \
1257 "$ loadkmap < /etc/i18n/lang-keymap\n"
1259 #define logger_trivial_usage \
1260 "[OPTION]... [MESSAGE]"
1261 #define logger_full_usage \
1262 "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \
1264 "\t-s\tLog to stderr as well as the system log.\n" \
1265 "\t-t\tLog using the specified tag (defaults to user name).\n" \
1266 "\t-p\tEnter the message with the specified priority.\n" \
1267 "\t\tThis may be numerical or a ``facility.level'' pair."
1268 #define logger_example_usage \
1269 "$ logger "hello"\n"
1271 #define login_trivial_usage \
1272 "[OPTION]... [username] [ENV=VAR ...]"
1273 #define login_full_usage \
1274 "Begin a new session on the system\n\n" \
1276 "\t-f\tDo not authenticate (user already authenticated)\n" \
1277 "\t-h\tName of the remote host for this login.\n" \
1278 "\t-p\tPreserve environment."
1280 #define logname_trivial_usage \
1282 #define logname_full_usage \
1283 "Print the name of the current user."
1284 #define logname_example_usage \
1288 #define logread_trivial_usage \
1291 #define logread_full_usage \
1292 "Shows the messages from syslogd (using circular buffer)."
1294 #define losetup_trivial_usage \
1295 "[OPTION]... LOOPDEVICE FILE\n" \
1296 "or: losetup [OPTION]... -d LOOPDEVICE"
1297 #define losetup_full_usage \
1298 "Associate LOOPDEVICE with FILE.\n\n" \
1300 "\t-d\t\tDisassociate LOOPDEVICE.\n" \
1301 "\t-o OFFSET\tStart OFFSET bytes into FILE.\n"
1303 #ifdef CONFIG_FEATURE_LS_TIMESTAMPS
1304 #define USAGE_LS_TIMESTAMPS(a) a
1306 #define USAGE_LS_TIMESTAMPS(a)
1308 #ifdef CONFIG_FEATURE_LS_FILETYPES
1309 #define USAGE_LS_FILETYPES(a) a
1311 #define USAGE_LS_FILETYPES(a)
1313 #ifdef CONFIG_FEATURE_LS_FOLLOWLINKS
1314 #define USAGE_LS_FOLLOWLINKS(a) a
1316 #define USAGE_LS_FOLLOWLINKS(a)
1318 #ifdef CONFIG_FEATURE_LS_RECURSIVE
1319 #define USAGE_LS_RECURSIVE(a) a
1321 #define USAGE_LS_RECURSIVE(a)
1323 #ifdef CONFIG_FEATURE_LS_SORTFILES
1324 #define USAGE_LS_SORTFILES(a) a
1326 #define USAGE_LS_SORTFILES(a)
1328 #ifdef CONFIG_FEATURE_AUTOWIDTH
1329 #define USAGE_AUTOWIDTH(a) a
1331 #define USAGE_AUTOWIDTH(a)
1333 #define ls_trivial_usage \
1334 "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USAGE_HUMAN_READABLE("h") USAGE_NOT_HUMAN_READABLE("") "k] [filenames...]"
1335 #define ls_full_usage \
1336 "List directory contents\n\n" \
1338 "\t-1\tlist files in a single column\n" \
1339 "\t-A\tdo not list implied . and ..\n" \
1340 "\t-a\tdo not hide entries starting with .\n" \
1341 "\t-C\tlist entries by columns\n" \
1342 USAGE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \
1343 "\t-d\tlist directory entries instead of contents\n" \
1344 USAGE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \
1345 USAGE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \
1346 "\t-i\tlist the i-node for each file\n" \
1347 "\t-l\tuse a long listing format\n" \
1348 "\t-n\tlist numeric UIDs and GIDs instead of names\n" \
1349 USAGE_LS_FILETYPES("\t-p\tappend indicator (one of /=@|) to entries\n") \
1350 USAGE_LS_FOLLOWLINKS("\t-L\tlist entries pointed to by symbolic links\n") \
1351 USAGE_LS_RECURSIVE("\t-R\tlist subdirectories recursively\n") \
1352 USAGE_LS_SORTFILES("\t-r\tsort the listing in reverse order\n") \
1353 USAGE_LS_SORTFILES("\t-S\tsort the listing by file size\n") \
1354 "\t-s\tlist the size of each file, in blocks\n" \
1355 USAGE_AUTOWIDTH("\t-T NUM\tassume Tabstop every NUM columns\n") \
1356 USAGE_LS_TIMESTAMPS("\t-t\twith -l: show modification time\n") \
1357 USAGE_LS_TIMESTAMPS("\t-u\twith -l: show access time\n") \
1358 USAGE_LS_SORTFILES("\t-v\tsort the listing by version\n") \
1359 USAGE_AUTOWIDTH("\t-w NUM\tassume the terminal is NUM columns wide\n") \
1360 "\t-x\tlist entries by lines instead of by columns\n" \
1361 USAGE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \
1362 USAGE_HUMAN_READABLE( \
1363 "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
1364 "\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \
1365 "\t-k\tprint sizes in kilobytes(compatibility)")
1367 #define lsmod_trivial_usage \
1369 #define lsmod_full_usage \
1370 "List the currently loaded kernel modules."
1372 #define makedevs_trivial_usage \
1373 "NAME TYPE MAJOR MINOR FIRST LAST [s]"
1374 #define makedevs_full_usage \
1375 "Creates a range of block or character special files\n\n" \
1376 "TYPEs include:\n" \
1377 "\tb:\tMake a block (buffered) device.\n" \
1378 "\tc or u:\tMake a character (un-buffered) device.\n" \
1379 "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes.\n\n" \
1380 "FIRST specifies the number appended to NAME to create the first device.\n" \
1381 "LAST specifies the number of the last item that should be created.\n" \
1382 "If 's' is the last argument, the base device is created as well.\n\n" \
1384 "\tmakedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \
1385 "\tmakedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
1386 #define makedevs_example_usage \
1387 "$ makedevs /dev/ttyS c 4 66 2 63\n" \
1388 "[creates ttyS2-ttyS63]\n" \
1389 "$ makedevs /dev/hda b 3 0 0 8 s\n" \
1390 "[creates hda,hda1-hda8]\n"
1392 #define md5sum_trivial_usage \
1393 "[OPTION] [FILE]...\n" \
1394 "or: md5sum [OPTION] -c [FILE]"
1395 #define md5sum_full_usage \
1396 "Print or check MD5 checksums.\n\n" \
1398 "With no FILE, or when FILE is -, read standard input.\n\n" \
1399 "\t-b\tread files in binary mode\n" \
1400 "\t-c\tcheck MD5 sums against given list\n" \
1401 "\t-t\tread files in text mode (default)\n" \
1402 "\t-g\tread a string\n" \
1403 "\nThe following two options are useful only when verifying checksums:\n" \
1404 "\t-s\tdon't output anything, status code shows success\n" \
1405 "\t-w\twarn about improperly formated MD5 checksum lines"
1406 #define md5sum_example_usage \
1407 "$ md5sum < busybox\n" \
1408 "6fd11e98b98a58f64ff3398d7b324003\n" \
1409 "$ md5sum busybox\n" \
1410 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
1412 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
1416 #define mesg_trivial_usage \
1418 #define mesg_full_usage \
1419 "mesg [Y|N], controls write access to your terminal\n" \
1420 "\ty\tAllow write access to your terminal.\n" \
1421 "\tn\tDisallow write access to your terminal.\n"
1423 #define mkdir_trivial_usage \
1424 "[OPTION] DIRECTORY..."
1425 #define mkdir_full_usage \
1426 "Create the DIRECTORY(ies) if they do not already exist\n\n" \
1428 "\t-m\tset permission mode (as in chmod), not rwxrwxrwx - umask\n" \
1429 "\t-p\tno error if existing, make parent directories as needed"
1430 #define mkdir_example_usage \
1431 "$ mkdir /tmp/foo\n" \
1432 "$ mkdir /tmp/foo\n" \
1433 "/tmp/foo: File exists\n" \
1434 "$ mkdir /tmp/foo/bar/baz\n" \
1435 "/tmp/foo/bar/baz: No such file or directory\n" \
1436 "$ mkdir -p /tmp/foo/bar/baz\n"
1438 #define mkfifo_trivial_usage \
1440 #define mkfifo_full_usage \
1441 "Creates a named pipe (identical to 'mknod name p')\n\n" \
1443 "\t-m\tcreate the pipe using the specified mode (default a=rw)"
1445 #define mkfs_minix_trivial_usage \
1446 "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
1447 #define mkfs_minix_full_usage \
1448 "Make a MINIX filesystem.\n\n" \
1450 "\t-c\t\tCheck the device for bad blocks\n" \
1451 "\t-n [14|30]\tSpecify the maximum length of filenames\n" \
1452 "\t-i INODES\tSpecify the number of inodes for the filesystem\n" \
1453 "\t-l FILENAME\tRead the bad blocks list from FILENAME\n" \
1454 "\t-v\t\tMake a Minix version 2 filesystem"
1456 #define mknod_trivial_usage \
1457 "[OPTIONS] NAME TYPE MAJOR MINOR"
1458 #define mknod_full_usage \
1459 "Create a special file (block, character, or pipe).\n\n" \
1461 "\t-m\tcreate the special file using the specified mode (default a=rw)\n\n" \
1462 "TYPEs include:\n" \
1463 "\tb:\tMake a block (buffered) device.\n" \
1464 "\tc or u:\tMake a character (un-buffered) device.\n" \
1465 "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes."
1466 #define mknod_example_usage \
1467 "$ mknod /dev/fd0 b 2 0 \n" \
1468 "$ mknod -m 644 /tmp/pipe p\n"
1470 #define mkswap_trivial_usage \
1471 "[-c] [-v0|-v1] device [block-count]"
1472 #define mkswap_full_usage \
1473 "Prepare a disk partition to be used as a swap partition.\n\n" \
1475 "\t-c\t\tCheck for read-ability.\n" \
1476 "\t-v0\t\tMake version 0 swap [max 128 Megs].\n" \
1477 "\t-v1\t\tMake version 1 swap [big!] (default for kernels >\n\t\t\t2.1.117).\n" \
1478 "\tblock-count\tNumber of block to use (default is entire partition)."
1480 #define mktemp_trivial_usage \
1482 #define mktemp_full_usage \
1483 "Creates a temporary file with its name based on TEMPLATE.\n" \
1484 "TEMPLATE is any name with six `Xs' (i.e., /tmp/temp.XXXXXX)."
1485 #define mktemp_example_usage \
1486 "$ mktemp /tmp/temp.XXXXXX\n" \
1487 "/tmp/temp.mWiLjM\n" \
1488 "$ ls -la /tmp/temp.mWiLjM\n" \
1489 "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
1491 #define modprobe_trivial_usage \
1493 #define modprobe_full_usage \
1494 "Used for high level module loading and unloading."
1495 #define modprobe_example_usage \
1496 "$ modprobe cdrom\n"
1498 #define more_trivial_usage \
1500 #define more_full_usage \
1501 "More is a filter for viewing FILE one screenful at a time."
1502 #define more_example_usage \
1505 #ifdef CONFIG_FEATURE_MOUNT_LOOP
1506 #define USAGE_MOUNT_LOOP(a) a
1508 #define USAGE_MOUNT_LOOP(a)
1510 #ifdef CONFIG_FEATURE_MTAB_SUPPORT
1511 #define USAGE_MTAB(a) a
1513 #define USAGE_MTAB(a)
1515 #define mount_trivial_usage \
1516 "[flags] DEVICE NODE [-o options,more-options]"
1517 #define mount_full_usage \
1518 "Mount a filesystem\n\n" \
1520 "\t-a:\t\tMount all filesystems in fstab.\n" \
1522 "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it.\n" \
1523 "\t-n:\t\tDon't write a mount table entry.\n" \
1525 "\t-o option:\tOne of many filesystem options, listed below.\n" \
1526 "\t-r:\t\tMount the filesystem read-only.\n" \
1527 "\t-t fs-type:\tSpecify the filesystem type.\n" \
1528 "\t-w:\t\tMount for reading and writing (default).\n" \
1530 "Options for use with the \"-o\" flag:\n" \
1531 "\tasync/sync:\tWrites are asynchronous / synchronous.\n" \
1532 "\tatime/noatime:\tEnable / disable updates to inode access times.\n" \
1533 "\tdev/nodev:\tAllow use of special device files / disallow them.\n" \
1534 "\texec/noexec:\tAllow use of executable files / disallow them.\n" \
1536 "\tloop:\t\tMounts a file via loop device.\n" \
1538 "\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them.\n" \
1539 "\tremount:\tRe-mount a mounted filesystem, changing its flags.\n" \
1540 "\tro/rw:\t\tMount for read-only / read-write.\n" \
1541 "\tbind:\t\tUse the linux 2.4.x \"bind\" feature.\n" \
1542 "\nThere are EVEN MORE flags that are specific to each filesystem.\n" \
1543 "You'll have to see the written documentation for those filesystems."
1544 #define mount_example_usage \
1546 "/dev/hda3 on / type minix (rw)\n" \
1547 "proc on /proc type proc (rw)\n" \
1548 "devpts on /dev/pts type devpts (rw)\n" \
1549 "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
1550 "$ mount /tmp/diskimage /opt -t ext2 -o loop\n"
1552 #define mt_trivial_usage \
1553 "[-f device] opcode value"
1554 #define mt_full_usage \
1555 "Control magnetic tape drive operation\n" \
1556 "\nAvailable Opcodes:\n\n" \
1557 "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
1558 "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
1559 "ras3 reset retension rew rewoffline seek setblk setdensity\n" \
1560 "setpart tell unload unlock weof wset"
1562 #define mv_trivial_usage \
1564 "or: mv SOURCE... DIRECTORY"
1565 #define mv_full_usage \
1566 "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY."
1567 #define mv_example_usage \
1568 "$ mv /tmp/foo /bin/bar\n"
1570 #define nameif_trivial_usage \
1571 "[-s] [-c FILE] [{IFNAME MACADDR}]"
1572 #define nameif_full_usage \
1573 "Nameif renaming network interface while it in the down state.\n\n" \
1575 "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \
1576 "\t-s\t\tUse syslog (LOCAL0 facility).\n" \
1577 "\tIFNAME MACADDR\tnew_interface_name interface_mac_address\n"
1578 #define nameif_example_usage \
1579 "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
1581 "$ nameif -c /etc/my_mactab_file\n" \
1583 #define nc_trivial_usage \
1584 "[OPTIONS] [IP] [port]"
1585 #define nc_full_usage \
1586 "Netcat opens a pipe to IP:port\n\n" \
1588 "\t-l\t\tlisten mode, for inbound connects\n" \
1589 "\t-p PORT\t\tlocal port number\n" \
1590 "\t-i SECS\t\tdelay interval for lines sent\n" \
1591 "\t-e PROG\t\tprogram to exec after connect (dangerous!)"
1592 #define nc_example_usage \
1593 "$ nc foobar.somedomain.com 25\n" \
1594 "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
1596 "214-Commands supported:\n" \
1597 "214- HELO EHLO MAIL RCPT DATA AUTH\n" \
1598 "214 NOOP QUIT RSET HELP\n" \
1600 "221 foobar closing connection\n"
1602 #define netstat_trivial_usage \
1604 #define netstat_full_usage \
1605 "-l display listening server sockets\n" \
1606 "-a display all sockets (default: connected)\n" \
1607 "-e display other/more information\n" \
1608 "-n don't resolve names\n" \
1609 "-r display routing table\n" \
1610 "-t tcp sockets\n" \
1611 "-u udp sockets\n" \
1612 "-w raw sockets\n" \
1615 #define nslookup_trivial_usage \
1617 #define nslookup_full_usage \
1618 "Queries the nameserver for the IP address of the given HOST\n" \
1619 "optionally using a specified DNS server"
1620 #define nslookup_example_usage \
1621 "$ nslookup localhost\n" \
1622 "Server: default\n" \
1623 "Address: default\n" \
1626 "Address: 127.0.0.1\n"
1628 #define od_trivial_usage \
1629 "[-aBbcDdeFfHhIiLlOovXx] [FILE]"
1630 #define od_full_usage \
1631 "Write an unambiguous representation, octal bytes by default, of FILE\n"\
1632 "to standard output. With no FILE, or when FILE is -, read standard input."
1634 #define openvt_trivial_usage \
1635 "<vtnum> <COMMAND> [ARGS...]"
1636 #define openvt_full_usage \
1637 "Start a command on a new virtual terminal"
1638 #define openvt_example_usage \
1639 "openvt 2 /bin/ash\n"
1641 #ifdef CONFIG_FEATURE_SHA1_PASSWORDS
1642 #define PASSWORD_ALG_TYPES(a) a
1644 #define PASSWORD_ALG_TYPES(a)
1646 #define passwd_trivial_usage \
1648 #define passwd_full_usage \
1649 "Change a user password. If no name is specified,\n" \
1650 "changes the password for the current user.\n" \
1652 "\t-a\tDefine which algorithm shall be used for the password.\n" \
1653 "\t\t\t(Choices: des, md5" \
1654 PASSWORD_ALG_TYPES(", sha1") \
1655 ")\n\t-d\tDelete the password for the specified user account.\n" \
1656 "\t-l\tLocks (disables) the specified user account.\n" \
1657 "\t-u\tUnlocks (re-enables) the specified user account."
1659 #define pidof_trivial_usage \
1660 "process-name [process-name ...]"
1661 #define pidof_full_usage \
1662 "Lists the PIDs of all processes with names that match the names on the command line"
1663 #define pidof_example_usage \
1667 #ifndef CONFIG_FEATURE_FANCY_PING
1668 #define ping_trivial_usage "host"
1669 #define ping_full_usage "Send ICMP ECHO_REQUEST packets to network hosts"
1671 #define ping_trivial_usage \
1673 #define ping_full_usage \
1674 "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
1676 "\t-c COUNT\tSend only COUNT pings.\n" \
1677 "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
1678 "\t-q\t\tQuiet mode, only displays output at start\n" \
1679 "\t\t\tand when finished."
1681 #define ping_example_usage \
1682 "$ ping localhost\n" \
1683 "PING slag (127.0.0.1): 56 data bytes\n" \
1684 "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
1686 "--- debian ping statistics ---\n" \
1687 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
1688 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
1690 #ifndef CONFIG_FEATURE_FANCY_PING6
1691 #define ping6_trivial_usage "host"
1692 #define ping6_full_usage "Send ICMP ECHO_REQUEST packets to network hosts"
1694 #define ping6_trivial_usage \
1696 #define ping6_full_usage \
1697 "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
1699 "\t-c COUNT\tSend only COUNT pings.\n" \
1700 "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
1701 "\t-q\t\tQuiet mode, only displays output at start\n" \
1702 "\t\t\tand when finished."
1704 #define ping6_example_usage \
1705 "$ ping6 ip6-localhost\n" \
1706 "PING ip6-localhost (::1): 56 data bytes\n" \
1707 "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
1709 "--- ip6-localhost ping statistics ---\n" \
1710 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
1711 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
1713 #define pivot_root_trivial_usage \
1715 #define pivot_root_full_usage \
1716 "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
1717 "the new root file system."
1719 #define poweroff_trivial_usage \
1721 #define poweroff_full_usage \
1722 "Halt the system and request that the kernel shut off the power."
1724 #define printf_trivial_usage \
1725 "FORMAT [ARGUMENT...]"
1726 #define printf_full_usage \
1727 "Formats and prints ARGUMENT(s) according to FORMAT,\n" \
1728 "Where FORMAT controls the output exactly as in C printf."
1729 #define printf_example_usage \
1730 "$ printf "Val=%d\\n" 5\n" \
1733 #define ps_trivial_usage \
1735 #define ps_full_usage \
1736 "Report process status\n" \
1737 "\nThis version of ps accepts no options."
1738 #define ps_example_usage \
1740 " PID Uid Gid State Command\n" \
1741 " 1 root root S init\n" \
1742 " 2 root root S [kflushd]\n" \
1743 " 3 root root S [kupdate]\n" \
1744 " 4 root root S [kpiod]\n" \
1745 " 5 root root S [kswapd]\n" \
1746 " 742 andersen andersen S [bash]\n" \
1747 " 743 andersen andersen S -bash\n" \
1748 " 745 root root S [getty]\n" \
1749 " 2990 andersen andersen R ps\n"
1751 #define pwd_trivial_usage \
1753 #define pwd_full_usage \
1754 "Print the full filename of the current working directory."
1755 #define pwd_example_usage \
1759 #define rdate_trivial_usage \
1761 #define rdate_full_usage \
1762 "Get and possibly set the system date and time from a remote HOST.\n\n" \
1764 "\t-s\tSet the system date and time (default).\n" \
1765 "\t-p\tPrint the date and time."
1767 #define readlink_trivial_usage \
1769 #define readlink_full_usage \
1770 "Read a symbolic link."
1772 #define realpath_trivial_usage \
1774 #define realpath_full_usage \
1775 "return the canonicalized absolute pathnames of given arguments\n\n"
1777 #define reboot_trivial_usage \
1779 #define reboot_full_usage \
1780 "Reboot the system."
1782 #define renice_trivial_usage \
1783 "priority pid [pid ...]"
1784 #define renice_full_usage \
1785 "Changes priority of running processes. Allowed priorities range\n" \
1786 "from 20 (the process runs only when nothing else is running) to 0\n" \
1787 "(default priority) to -20 (almost nothing else ever gets to run)."
1789 #define reset_trivial_usage \
1791 #define reset_full_usage \
1792 "Resets the screen."
1794 #define rm_trivial_usage \
1795 "[OPTION]... FILE..."
1796 #define rm_full_usage \
1797 "Remove (unlink) the FILE(s). You may use '--' to\n" \
1798 "indicate that all following arguments are non-options.\n\n" \
1800 "\t-i\t\talways prompt before removing each destination\n" \
1801 "\t-f\t\tremove existing destinations, never prompt\n" \
1802 "\t-r or -R\tremove the contents of directories recursively"
1803 #define rm_example_usage \
1804 "$ rm -rf /tmp/foo\n"
1806 #define rmdir_trivial_usage \
1807 "[OPTION]... DIRECTORY..."
1808 #define rmdir_full_usage \
1809 "Remove the DIRECTORY(ies), if they are empty."
1810 #define rmdir_example_usage \
1811 "# rmdir /tmp/foo\n"
1813 #define rmmod_trivial_usage \
1814 "[OPTION]... [MODULE]..."
1815 #define rmmod_full_usage \
1816 "Unloads the specified kernel modules from the kernel.\n\n" \
1818 "\t-a\tRemove all unused modules (recursively)"
1819 #define rmmod_example_usage \
1822 #define route_trivial_usage \
1824 #define route_full_usage \
1825 "Edit the kernel's routing tables.\n\n" \
1827 "\t-n\tDont resolve names.\n" \
1828 "\t-e\tDisplay other/more information"
1830 #define rpm_trivial_usage \
1831 "-i -q[ildc]p package.rpm"
1832 #define rpm_full_usage \
1833 "Manipulates RPM packages" \
1835 "\t-i Install package" \
1836 "\t-q Query package" \
1837 "\t\t-p Query uninstalled package" \
1838 "\t\t-i Show information" \
1839 "\t\t-l List contents" \
1840 "\t\t-d List documents" \
1841 "\t\t-c List config files"
1843 #define rpm2cpio_trivial_usage \
1845 #define rpm2cpio_full_usage \
1846 "Outputs a cpio archive of the rpm file."
1848 #define run_parts_trivial_usage \
1849 "[-t] [-a ARG] [-u MASK] DIRECTORY"
1850 #define run_parts_full_usage \
1851 "Run a bunch of scripts in a directory.\n\n" \
1853 "\t-t\t\tTest only what file will be executed, without execute them.\n" \
1854 "\t-a ARG\tPass ARG as an argument for every program invoked.\n" \
1855 "\t-u MASK\tSet the umask to MASK before executing every program."
1857 #define sed_trivial_usage \
1858 "[-nef] pattern [files...]"
1859 #define sed_full_usage \
1861 "\t-n\t\tsuppress automatic printing of pattern space\n" \
1862 "\t-e script\tadd the script to the commands to be executed\n" \
1863 "\t-f scriptfile\tadd the contents of script-file to the commands to be executed\n" \
1865 "If no -e or -f is given, the first non-option argument is taken as the\n" \
1866 "sed script to interpret. All remaining arguments are names of input\n" \
1867 "files; if no input files are specified, then the standard input is read."
1868 #define sed_example_usage \
1869 "$ echo "foo" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
1872 #define setkeycodes_trivial_usage \
1873 "SCANCODE KEYCODE ..."
1874 #define setkeycodes_full_usage \
1875 "Set entries into the kernel's scancode-to-keycode map,\n" \
1876 "allowing unusual keyboards to generate usable keycodes.\n\n" \
1877 "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
1878 "and KEYCODE is given in decimal"
1879 #define setkeycodes_example_usage \
1880 "$ setkeycodes e030 127\n"
1882 #define lash_trivial_usage \
1884 "or: sh -c command [args]..."
1885 #define lash_full_usage \
1886 "lash: The BusyBox LAme SHell (command interpreter)"
1887 #define lash_notes_usage \
1888 "This command does not yet have proper documentation.\n" \
1890 "Use lash just as you would use any other shell. It properly handles pipes,\n" \
1891 "redirects, job control, can be used as the shell for scripts, and has a\n" \
1892 "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
1893 "Bourne Shell syntax. If you need things like "if-then-else", "while", and such\n" \
1894 "use ash or bash. If you just need a very simple and extremely small shell,\n" \
1895 "this will do the job."
1897 #define sha1sum_trivial_usage \
1899 #define sha1sum_full_usage \
1902 #ifdef CONFIG_FEATURE_FANCY_SLEEP
1903 #define USAGE_FANCY_SLEEP(a) a
1904 #define USAGE_NOT_FANCY_SLEEP(a)
1906 #define USAGE_FANCY_SLEEP(a)
1907 #define USAGE_NOT_FANCY_SLEEP(a) a
1910 #define sleep_trivial_usage \
1911 USAGE_FANCY_SLEEP("[") "N" USAGE_FANCY_SLEEP("]...")
1912 #define sleep_full_usage \
1913 USAGE_NOT_FANCY_SLEEP("Pause for N seconds.") \
1914 USAGE_FANCY_SLEEP( \
1915 "Pause for a time equal to the total of the args given, where each arg can\n" \
1916 "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
1917 #define sleep_example_usage \
1919 "[2 second delay results]\n" \
1920 USAGE_FANCY_SLEEP("$ sleep 1d 3h 22m 8s\n" \
1921 "[98528 second delay results]\n")
1923 #ifdef CONFIG_FEATURE_SORT_UNIQUE
1924 #define USAGE_SORT_UNIQUE(a) a
1926 #define USAGE_SORT_UNIQUE(a)
1928 #ifdef CONFIG_FEATURE_SORT_REVERSE
1929 #define USAGE_SORT_REVERSE(a) a
1931 #define USAGE_SORT_REVERSE(a)
1933 #define sort_trivial_usage \
1934 "[-n" USAGE_SORT_REVERSE("r") USAGE_SORT_UNIQUE("u") "] [FILE]..."
1935 #define sort_full_usage \
1936 "Sorts lines of text in the specified files\n\n"\
1938 USAGE_SORT_UNIQUE("\t-u\tsuppress duplicate lines\n") \
1939 USAGE_SORT_REVERSE("\t-r\tsort in reverse order\n") \
1940 "\t-n\tsort numerics"
1941 #define sort_example_usage \
1942 "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
1950 #define start_stop_daemon_trivial_usage \
1952 #define start_stop_daemon_full_usage \
1953 "Program to start and stop services.\n"\
1957 "-b\t\t\tforce process into background (daemonize)\n"\
1958 "-x <executable>\t\tprogram to start/check if it is running\n"\
1959 "-u <username>|<uid>\tstop this user's processes\n"\
1960 "-n <process-name>\tstop processes with this name\n"\
1961 "-s <signal>\t\tsignal to send (default 15)\n"\
1962 "-a <pathname>\t\tprogram to start (default <executable>)\n"
1964 #define strings_trivial_usage \
1965 "[-afo] [-n length] [file ... ]"
1966 #define strings_full_usage \
1967 "Display printable strings in a binary file." \
1969 "\n\t-f\tPrecede each string with the name of the file where it was found." \
1970 "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \
1971 "\n\t-o\tEach string is preceded by its decimal offset in the file."
1973 #define stty_trivial_usage \
1974 "[-a|g] [-F DEVICE] [SETTING]..."
1975 #define stty_full_usage \
1976 "Without arguments, prints baud rate, line discipline," \
1977 "\nand deviations from stty sane." \
1979 "\n\t-F DEVICE\topen device instead of stdin" \
1980 "\n\t-a\t\tprint all current settings in human-readable form" \
1981 "\n\t-g\t\tprint in stty-readable form" \
1982 "\n\t[SETTING]\tsee manpage"
1984 #define su_trivial_usage \
1985 "[OPTION]... [-] [username]"
1986 #define su_full_usage \
1987 "Change user id or become root.\n" \
1989 "\t-p\tPreserve environment"
1991 #define sulogin_trivial_usage \
1992 "[OPTION]... [tty-device]"
1993 #define sulogin_full_usage \
1994 "Single user login\n" \
1996 "\t-f\tDo not authenticate (user already authenticated)\n" \
1997 "\t-h\tName of the remote host for this login.\n" \
1998 "\t-p\tPreserve environment."
2000 #define swapoff_trivial_usage \
2002 #define swapoff_full_usage \
2003 "Stop swapping virtual memory pages on DEVICE.\n\n" \
2005 "\t-a\tStop swapping on all swap devices"
2007 #define swapon_trivial_usage \
2009 #define swapon_full_usage \
2010 "Start swapping virtual memory pages on DEVICE.\n\n" \
2012 "\t-a\tStart swapping on all swap devices"
2014 #define sync_trivial_usage \
2016 #define sync_full_usage \
2017 "Write all buffered filesystem blocks to disk."
2020 #ifdef CONFIG_FEATURE_REMOTE_LOG
2021 #define USAGE_REMOTE_LOG(a) a
2023 #define USAGE_REMOTE_LOG(a)
2025 #ifdef CONFIG_FEATURE_IPC_SYSLOG
2026 #define USAGE_IPC_LOG(a) a
2028 #define USAGE_IPC_LOG(a)
2031 #define syslogd_trivial_usage \
2033 #define syslogd_full_usage \
2034 "Linux system and kernel logging utility.\n" \
2035 "Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \
2037 "\t-m NUM\t\tInterval between MARK lines (default=20min, 0=off)\n" \
2038 "\t-n\t\tRun as a foreground process\n" \
2039 "\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)" \
2041 "\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \
2042 "\t-L\t\tLog locally and via network logging (default is network only)") \
2044 "\n\t-C\t\tLog to a circular buffer (read the buffer using logread)")
2045 #define syslogd_example_usage \
2046 "$ syslogd -R masterlog:514\n" \
2047 "$ syslogd -R 192.168.1.1:601\n"
2050 #ifndef CONFIG_FEATURE_FANCY_TAIL
2051 #define USAGE_UNSIMPLE_TAIL(a)
2053 #define USAGE_UNSIMPLE_TAIL(a) a
2055 #define tail_trivial_usage \
2056 "[OPTION]... [FILE]..."
2057 #define tail_full_usage \
2058 "Print last 10 lines of each FILE to standard output.\n" \
2059 "With more than one FILE, precede each with a header giving the\n" \
2060 "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
2062 USAGE_UNSIMPLE_TAIL("\t-c N[kbm]\toutput the last N bytes\n") \
2063 "\t-n N[kbm]\tprint last N lines instead of last 10\n" \
2064 "\t-f\t\toutput data as the file grows" \
2065 USAGE_UNSIMPLE_TAIL( "\n\t-q\t\tnever output headers giving file names\n" \
2066 "\t-s SEC\t\twait SEC seconds between reads with -f\n" \
2067 "\t-v\t\talways output headers giving file names\n\n" \
2068 "If the first character of N (bytes or lines) is a '+', output begins with \n" \
2069 "the Nth item from the start of each file, otherwise, print the last N items\n" \
2070 "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
2071 #define tail_example_usage \
2072 "$ tail -n 1 /etc/resolv.conf\n" \
2073 "nameserver 10.0.0.1\n"
2075 #ifdef CONFIG_FEATURE_TAR_CREATE
2076 #define USAGE_TAR_CREATE(a) a
2078 #define USAGE_TAR_CREATE(a)
2080 #ifdef CONFIG_FEATURE_TAR_EXCLUDE
2081 #define USAGE_TAR_EXCLUDE(a) a
2083 #define USAGE_TAR_EXCLUDE(a)
2085 #ifdef CONFIG_FEATURE_TAR_GZIP
2086 #define USAGE_TAR_GZIP(a) a
2088 #define USAGE_TAR_GZIP(a)
2090 #ifdef CONFIG_FEATURE_TAR_BZIP2
2091 #define USAGE_TAR_BZIP2(a) a
2093 #define USAGE_TAR_BZIP2(a)
2096 #define tar_trivial_usage \
2097 "-[" USAGE_TAR_CREATE("c") USAGE_TAR_GZIP("z") USAGE_TAR_BZIP2("j") "xtvO] " \
2098 USAGE_TAR_EXCLUDE("[--exclude FILE] [-X FILE]") \
2099 "[-f TARFILE] [-C DIR] [FILE(s)] ..."
2100 #define tar_full_usage \
2101 "Create, extract, or list files from a tar file.\n\n" \
2103 USAGE_TAR_CREATE("\tc\t\tcreate\n") \
2104 "\tx\t\textract\n" \
2106 "\nArchive format selection:\n" \
2107 USAGE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \
2108 USAGE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \
2109 "\nFile selection:\n" \
2110 "\tf\t\tname of TARFILE or \"-\" for stdin\n" \
2111 "\tO\t\textract to stdout\n" \
2112 USAGE_TAR_EXCLUDE( \
2113 "\texclude\t\tfile to exclude\n" \
2114 "\tX\t\tfile with names to exclude\n" \
2116 "\tC\t\tchange to directory DIR before operation\n" \
2117 "\tv\t\tverbosely list files processed"
2118 #define tar_example_usage \
2119 "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
2120 "$ tar -cf /tmp/tarball.tar /usr/local\n"
2122 #define tee_trivial_usage \
2123 "[OPTION]... [FILE]..."
2124 #define tee_full_usage \
2125 "Copy standard input to each FILE, and also to standard output.\n\n" \
2127 "\t-a\tappend to the given FILEs, do not overwrite\n" \
2128 "\t-i\tignore interrupt signals (SIGINT)"
2129 #define tee_example_usage \
2130 "$ echo "Hello" | tee /tmp/foo\n" \
2131 "$ cat /tmp/foo\n" \
2134 #define telnet_trivial_usage \
2136 #define telnet_full_usage \
2137 "Telnet is used to establish interactive communication with another\n"\
2138 "computer over a network using the TELNET protocol."
2140 #ifdef CONFIG_FEATURE_TELNETD_INETD
2141 #define telnetd_trivial_usage \
2142 "(inetd mode) [OPTION]"
2143 #define telnetd_full_usage \
2144 "Telnetd uses incoming TELNET connections via inetd.\n"\
2146 "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)"
2148 #define telnetd_trivial_usage \
2150 #define telnetd_full_usage \
2151 "Telnetd listens for incoming TELNET connections on PORT.\n"\
2153 "\t-p PORT\tlisten for connections on PORT (default 23)\n"\
2154 "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)"
2157 #define test_trivial_usage \
2158 "EXPRESSION\n or [ EXPRESSION ]"
2159 #define test_full_usage \
2160 "Checks file types and compares values returning an exit\n" \
2161 "code determined by the value of EXPRESSION."
2162 #define test_example_usage \
2163 "$ test 1 -eq 2\n" \
2166 "$ test 1 -eq 1\n" \
2172 "$ [ -d /junk ]\n" \
2176 #ifdef CONFIG_FEATURE_TFTP_GET
2177 #define USAGE_TFTP_GET(a) a
2179 #define USAGE_TFTP_GET(a)
2181 #ifdef CONFIG_FEATURE_TFTP_PUT
2182 #define USAGE_TFTP_PUT(a) a
2184 #define USAGE_TFTP_PUT(a)
2186 #ifdef CONFIG_FEATURE_TFTP_BLOCKSIZE
2187 #define USAGE_TFTP_BS(a) a
2189 #define USAGE_TFTP_BS(a)
2192 #define tftp_trivial_usage \
2193 "[OPTION]... HOST [PORT]"
2194 #define tftp_full_usage \
2195 "Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \
2197 "\t-l FILE\tLocal FILE.\n" \
2198 "\t-r FILE\tRemote FILE.\n" \
2200 "\t-g\tGet file.\n" \
2203 "\t-p\tPut file.\n" \
2206 "\t-b SIZE\tTransfer blocks of SIZE octets.\n" \
2208 #define time_trivial_usage \
2209 "[OPTION]... COMMAND [ARGS...]"
2210 #define time_full_usage \
2211 "Runs the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
2212 "COMMAND's resource usage information is displayed\n\n" \
2214 "\t-v\tDisplays verbose resource usage information."
2216 #define top_trivial_usage \
2218 #define top_full_usage \
2219 "top provides an view of processor activity in real time.\n" \
2220 "This utility reads the status for all processes in /proc each <seconds>\n" \
2221 "and shows the status for however many processes will fit on the screen.\n" \
2222 "This utility will not show processes that are started after program startup,\n" \
2223 "but it will show the EXIT status for and PIDs that exit while it is running."
2225 #define touch_trivial_usage \
2226 "[-c] FILE [FILE ...]"
2227 #define touch_full_usage \
2228 "Update the last-modified date on the given FILE[s].\n\n" \
2230 "\t-c\tDo not create any files"
2231 #define touch_example_usage \
2232 "$ ls -l /tmp/foo\n" \
2233 "/bin/ls: /tmp/foo: No such file or directory\n" \
2234 "$ touch /tmp/foo\n" \
2235 "$ ls -l /tmp/foo\n" \
2236 "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
2238 #define tr_trivial_usage \
2239 "[-cds] STRING1 [STRING2]"
2240 #define tr_full_usage \
2241 "Translate, squeeze, and/or delete characters from\n" \
2242 "standard input, writing to standard output.\n\n" \
2244 "\t-c\ttake complement of STRING1\n" \
2245 "\t-d\tdelete input characters coded STRING1\n" \
2246 "\t-s\tsqueeze multiple output characters of STRING2 into one character"
2247 #define tr_example_usage \
2248 "$ echo "gdkkn vnqkc" | tr [a-y] [b-z]\n" \
2251 #define traceroute_trivial_usage \
2252 "[-dnrv] [-m max_ttl] [-p port#] [-q nqueries]\n\
2253 [-s src_addr] [-t tos] [-w wait] host [data size]"
2254 #define traceroute_full_usage \
2255 "trace the route ip packets follow going to \"host\"\n" \
2257 "\t-d\tset SO_DEBUG options to socket\n" \
2258 "\t-n\tPrint hop addresses numerically rather than symbolically\n" \
2259 "\t-r\tBypass the normal routing tables and send directly to a host\n" \
2260 "\t-v\tVerbose output\n" \
2261 "\t-m max_ttl\tSet the max time-to-live (max number of hops)\n" \
2262 "\t-p port#\tSet the base UDP port number used in probes\n" \
2263 "\t\t(default is 33434)\n" \
2264 "\t-q nqueries\tSet the number of probes per ``ttl'' to nqueries\n" \
2265 "\t\t(default is 3)\n" \
2266 "\t-s src_addr\tUse the following IP address as the source address\n" \
2267 "\t-t tos\tSet the type-of-service in probe packets to the following value\n" \
2268 "\t\t(default 0)\n" \
2269 "\t-w wait\tSet the time (in seconds) to wait for a response to a probe\n" \
2270 "\t\t(default 3 sec.)."
2273 #define true_trivial_usage \
2275 #define true_full_usage \
2276 "Return an exit code of TRUE (0)."
2277 #define true_example_usage \
2282 #define tty_trivial_usage \
2284 #define tty_full_usage \
2285 "Print the file name of the terminal connected to standard input.\n\n"\
2287 "\t-s\tprint nothing, only return an exit status"
2288 #define tty_example_usage \
2292 #define udhcpc_trivial_usage \
2293 "[-fbnqv] [-c CLIENTID] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
2294 #define udhcpc_full_usage \
2295 "\t-c,\t--clientid=CLIENTID\tClient identifier\n" \
2296 "\t-H,\t--hostname=HOSTNAME\tClient hostname\n" \
2297 "\t-h,\t \tAlias for -H\n" \
2298 "\t-f,\t--foreground\tDo not fork after getting lease\n" \
2299 "\t-b,\t--background\tFork to background if lease cannot be immediately negotiated.\n" \
2300 "\t-i,\t--interface=INTERFACE\tInterface to use (default: eth0)\n" \
2301 "\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated.\n" \
2302 "\t-p,\t--pidfile=file\tStore process ID of daemon in file\n" \
2303 "\t-q,\t--quit\tQuit after obtaining lease\n" \
2304 "\t-r,\t--request=IP\tIP address to request (default: none)\n" \
2305 "\t-s,\t--script=file\tRun file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \
2306 "\t-v,\t--version\tDisplay version"
2308 #define udhcpd_trivial_usage \
2311 #define udhcpd_full_usage \
2314 #ifdef CONFIG_FEATURE_MOUNT_FORCE
2315 #define USAGE_MOUNT_FORCE(a) a
2317 #define USAGE_MOUNT_FORCE(a)
2319 #define umount_trivial_usage \
2320 "[flags] FILESYSTEM|DIRECTORY"
2321 #define umount_full_usage \
2322 "Unmount file systems\n" \
2323 "\nFlags:\n" "\t-a\tUnmount all file systems" \
2324 USAGE_MTAB(" in /etc/mtab\n\t-n\tDon't erase /etc/mtab entries") \
2325 "\n\t-r\tTry to remount devices as read-only if mount is busy" \
2326 USAGE_MOUNT_FORCE("\n\t-f\tForce umount (i.e., unreachable NFS server)") \
2327 USAGE_MOUNT_LOOP("\n\t-l\tDo not free loop device (if a loop device has been used)")
2328 #define umount_example_usage \
2329 "$ umount /dev/hdc1 \n"
2331 #define uname_trivial_usage \
2333 #define uname_full_usage \
2334 "Print certain system information. With no OPTION, same as -s.\n\n" \
2336 "\t-a\tprint all information\n" \
2337 "\t-m\tthe machine (hardware) type\n" \
2338 "\t-n\tprint the machine's network node hostname\n" \
2339 "\t-r\tprint the operating system release\n" \
2340 "\t-s\tprint the operating system name\n" \
2341 "\t-p\tprint the host processor type\n" \
2342 "\t-v\tprint the operating system version"
2343 #define uname_example_usage \
2345 "Linux debian 2.2.15pre13 #5 Tue Mar 14 16:03:50 MST 2000 i686 unknown\n"
2347 #define uncompress_trivial_usage \
2348 "[-c] [-f] [ name ... ]"
2349 #define uncompress_full_usage \
2350 "Uncompress .Z file[s]\n" \
2352 "\t-c\textract to stdout\n" \
2353 "\t-f\tforce overwrite an existing file\n"
2355 #define uniq_trivial_usage \
2356 "[OPTION]... [INPUT [OUTPUT]]"
2357 #define uniq_full_usage \
2358 "Discard all but one of successive identical lines from INPUT\n" \
2359 "(or standard input), writing to OUTPUT (or standard output).\n\n" \
2361 "\t-c\tprefix lines by the number of occurrences\n" \
2362 "\t-d\tonly print duplicate lines\n" \
2363 "\t-u\tonly print unique lines\n" \
2364 "\t-f N\tskip the first N fields\n" \
2365 "\t-s N\tskip the first N chars (after any skipped fields)"
2366 #define uniq_example_usage \
2367 "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
2372 #define unix2dos_trivial_usage \
2374 #define unix2dos_full_usage \
2375 "Converts FILE from unix format to dos format. When no option\n" \
2376 "is given, the input is converted to the opposite output format.\n" \
2377 "When no file is given, uses stdin for input and stdout for output.\n" \
2379 "\t-u\toutput will be in UNIX format\n" \
2380 "\t-d\toutput will be in DOS format"
2382 #define unzip_trivial_usage \
2383 "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
2384 #define unzip_full_usage \
2385 "Extracts files from ZIP archives.\n\n" \
2387 "\t-l\tlist archive contents (short form)\n" \
2388 "\t-n\tnever overwrite existing files (default)\n" \
2389 "\t-o\toverwrite files without prompting\n" \
2390 "\t-p\tsend output to stdout\n" \
2391 "\t-q\tbe quiet\n" \
2392 "\t-x\texclude these files\n" \
2393 "\t-d\textract files into this directory"
2395 #define update_trivial_usage \
2397 #define update_full_usage \
2398 "Periodically flushes filesystem buffers.\n\n" \
2400 "\t-S\tforce use of sync(2) instead of flushing\n" \
2401 "\t-s SECS\tcall sync this often (default 30)\n" \
2402 "\t-f SECS\tflush some buffers this often (default 5)"
2404 #define uptime_trivial_usage \
2406 #define uptime_full_usage \
2407 "Display the time since the last boot."
2408 #define uptime_example_usage \
2410 " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
2412 #define usleep_trivial_usage \
2414 #define usleep_full_usage \
2415 "Pause for N microseconds."
2416 #define usleep_example_usage \
2417 "$ usleep 1000000\n" \
2418 "[pauses for 1 second]\n"
2420 #define uudecode_trivial_usage \
2422 #define uudecode_full_usage \
2423 "Uudecode a file that is uuencoded.\n\n" \
2425 "\t-o FILE\tdirect output to FILE"
2426 #define uudecode_example_usage \
2427 "$ uudecode -o busybox busybox.uu\n" \
2428 "$ ls -l busybox\n" \
2429 "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
2431 #define uuencode_trivial_usage \
2432 "[OPTION] [INFILE] REMOTEFILE"
2433 #define uuencode_full_usage \
2434 "Uuencode a file.\n\n" \
2436 "\t-m\tuse base64 encoding per RFC1521"
2437 #define uuencode_example_usage \
2438 "$ uuencode busybox busybox\n" \
2439 "begin 755 busybox\n" \
2440 "<encoded file snipped>\n" \
2441 "$ uudecode busybox busybox > busybox.uu\n" \
2444 #define vconfig_trivial_usage \
2445 "COMMAND [OPTIONS] ..."
2447 #define vconfig_full_usage \
2448 "Usage: add [interface-name] [vlan_id] \n" \
2449 " rem [vlan-name] \n" \
2450 " set_flag [interface-name] [flag-num] [0 | 1] \n" \
2451 " set_egress_map [vlan-name] [skb_priority] [vlan_qos] \n" \
2452 " set_ingress_map [vlan-name] [skb_priority] [vlan_qos] \n" \
2453 " set_name_type [name-type] \n"
2455 #define vi_trivial_usage \
2456 "[OPTION] [FILE]..."
2457 #define vi_full_usage \
2460 "\t-R\tRead-only- do not write to the file."
2462 #define vlock_trivial_usage \
2464 #define vlock_full_usage \
2465 "Lock a virtual terminal. A password is required to unlock\n" \
2467 "\t-a\tLock all VTs"
2469 #define watch_trivial_usage \
2470 "[-n <seconds>] COMMAND..."
2471 #define watch_full_usage \
2472 "Executes a program periodically.\n" \
2474 "\t-n\tLoop period in seconds - default is 2."
2475 #define watch_example_usage \
2477 "Mon Dec 17 10:31:40 GMT 2000\n" \
2478 "Mon Dec 17 10:31:42 GMT 2000\n" \
2479 "Mon Dec 17 10:31:44 GMT 2000"
2481 #define watchdog_trivial_usage \
2483 #define watchdog_full_usage \
2484 "Periodically write to watchdog device DEV"
2486 #define wc_trivial_usage \
2487 "[OPTION]... [FILE]..."
2488 #define wc_full_usage \
2489 "Print line, word, and byte counts for each FILE, and a total line if\n" \
2490 "more than one FILE is specified. With no FILE, read standard input.\n\n" \
2492 "\t-c\tprint the byte counts\n" \
2493 "\t-l\tprint the newline counts\n" \
2494 "\t-L\tprint the length of the longest line\n" \
2495 "\t-w\tprint the word counts"
2496 #define wc_example_usage \
2497 "$ wc /etc/passwd\n" \
2498 " 31 46 1365 /etc/passwd\n"
2500 #define wget_trivial_usage \
2501 "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url"
2502 #define wget_full_usage \
2503 "wget retrieves files via HTTP or FTP\n\n" \
2505 "\t-c\tcontinue retrieval of aborted transfers\n" \
2506 "\t-q\tquiet mode - do not print\n" \
2507 "\t-P\tSet directory prefix to DIR\n" \
2508 "\t-O\tsave to filename ('-' for stdout)\n" \
2509 "\t-Y\tuse proxy ('on' or 'off')"
2511 #define which_trivial_usage \
2513 #define which_full_usage \
2514 "Locates a COMMAND."
2515 #define which_example_usage \
2519 #define who_trivial_usage \
2521 #define who_full_usage \
2522 "Prints the current user names and related information"
2524 #define whoami_trivial_usage \
2526 #define whoami_full_usage \
2527 "Prints the user name associated with the current effective user id."
2529 #define xargs_trivial_usage \
2530 "[COMMAND] [-prt] [ARGS...]"
2531 #define xargs_full_usage \
2532 "Executes COMMAND on every item given by standard input.\n\n" \
2534 "\t-p\tPrompt the user about whether to run each command\n" \
2535 "\t-r\tDo not run command for empty readed lines\n" \
2536 "\t-t\tPrint the command line on stderr before executing it."
2537 #define xargs_example_usage \
2538 "$ ls | xargs gzip\n" \
2539 "$ find . -name '*.c' -print | xargs rm\n"
2541 #define yes_trivial_usage \
2542 "[OPTION]... [STRING]..."
2543 #define yes_full_usage \
2544 "Repeatedly outputs a line with all specified STRING(s), or 'y'."
2546 #define zcat_trivial_usage \
2548 #define zcat_full_usage \
2549 "Uncompress to stdout."
projects / oweals / busybox.git / blob