1 /* vi: set sw=8 ts=8: */
3 * This file suffers from chronically incorrect tabification
4 * of messages. Before editing this file:
5 * 1. Switch you editor to 8-space tab mode.
6 * 2. Do not use \t in messages, use real tab character.
7 * 3. Start each source line with message as follows:
8 * |<7 spaces>"text with tabs"....
11 #ifndef __BB_USAGE_H__
12 #define __BB_USAGE_H__
14 #define addgroup_trivial_usage \
15 "[-g GID] group_name [user_name]"
16 #define addgroup_full_usage \
17 "Add a group to the system" \
21 #define adduser_trivial_usage \
23 #define adduser_full_usage \
24 "Add a user to the system" \
26 " -h DIR Assign home directory DIR\n" \
27 " -g GECOS Assign gecos field GECOS\n" \
28 " -s SHELL Assign login shell SHELL\n" \
29 " -G Add the user to existing group GROUP\n" \
30 " -S Create a system user (ignored)\n" \
31 " -D Do not assign a password (logins still possible via ssh)\n" \
32 " -H Do not create the home directory"
34 #define adjtimex_trivial_usage \
35 "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
36 #define adjtimex_full_usage \
37 "Read and optionally set system timebase parameters.\n" \
40 " -q Quiet mode - do not print\n" \
41 " -o offset Time offset, microseconds\n" \
42 " -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)\n" \
43 " (positive values make the system clock run fast)\n" \
44 " -t tick Microseconds per tick, usually 10000\n" \
47 #define ar_trivial_usage \
48 "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
49 #define ar_full_usage \
50 "Extract or list FILES from an ar archive" \
52 " -o Preserve original dates\n" \
53 " -p Extract to stdout\n" \
56 " -v Verbosely list files processed"
58 #define arp_trivial_usage \
60 "[-vn] [-H type] [-i if] -a [hostname]\n" \
61 "[-v] [-i if] -d hostname [pub]\n" \
62 "[-v] [-H type] [-i if] -s hostname hw_addr [temp]\n" \
63 "[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \
64 "[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n"
65 #define arp_full_usage \
66 "Manipulate the system ARP cache" \
68 "\n -a Display (all) hosts" \
69 "\n -s Set a new ARP entry" \
70 "\n -d Delete a specified entry" \
72 "\n -n Don't resolve names" \
73 "\n -i if Specify network interface (e.g. eth0)" \
74 "\n -D Read <hwaddr> from given device" \
75 "\n -A, -p Specify protocol family" \
76 "\n -H hwtype Specify hardware address type"
78 #define arping_trivial_usage \
79 "[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target"
80 #define arping_full_usage \
81 "Ping hosts by ARP requests/replies" \
83 " -f Quit on first ARP reply\n" \
85 " -b Keep broadcasting, don't go unicast\n" \
86 " -D Duplicated address detection mode\n" \
87 " -U Unsolicited ARP mode, update your neighbours\n" \
88 " -A ARP answer mode, update your neighbours\n" \
89 " -c count Stop after sending count ARP request packets\n" \
90 " -w timeout Time to wait for ARP reply, in seconds\n" \
91 " -i device Outgoing interface name, default is eth0\n" \
92 " -s sender Set specific sender IP address\n" \
93 " target Target IP address of ARP request"
95 #define ash_trivial_usage \
97 "or: ash -c command [args]..."
98 #define ash_full_usage \
99 "The ash shell (command interpreter)"
101 #define awk_trivial_usage \
102 "[OPTION]... [program-text] [FILE ...]"
103 #define awk_full_usage \
105 " -v var=val Assign value 'val' to variable 'var'\n" \
106 " -F sep Use 'sep' as field separator\n" \
107 " -f progname Read program source from file 'progname'"
109 #define basename_trivial_usage \
111 #define basename_full_usage \
112 "Strip directory path and suffixes from FILE.\n" \
113 "If specified, also remove any trailing SUFFIX."
114 #define basename_example_usage \
115 "$ basename /usr/local/bin/foo\n" \
117 "$ basename /usr/local/bin/\n" \
119 "$ basename /foo/bar.txt .txt\n" \
122 #define bunzip2_trivial_usage \
124 #define bunzip2_full_usage \
125 "Uncompress FILE (or standard input if FILE is '-' or omitted)" \
127 " -c Write output to standard output\n" \
130 #define busybox_notes_usage \
133 #define bzcat_trivial_usage \
135 #define bzcat_full_usage \
136 "Uncompress to stdout"
138 #define unlzma_trivial_usage \
140 #define unlzma_full_usage \
141 "Uncompress FILE (or standard input if FILE is '-' or omitted)" \
143 " -c Write output to standard output\n" \
146 #define lzmacat_trivial_usage \
148 #define lzmacat_full_usage \
149 "Uncompress to stdout"
151 #define cal_trivial_usage \
152 "[-jy] [[month] year]"
153 #define cal_full_usage \
154 "Display a calendar" \
156 " -j Use julian dates\n" \
157 " -y Display the entire year"
159 #define cat_trivial_usage \
161 #define cat_full_usage \
162 "Concatenate FILE(s) and print them to stdout" \
164 " -u Ignored since unbuffered i/o is always used"
165 #define cat_example_usage \
166 "$ cat /proc/uptime\n" \
169 #define catv_trivial_usage \
171 #define catv_full_usage \
172 "Display nonprinting characters as ^x or M-x" \
174 " -e End each line with $\n" \
175 " -t Show tabs as ^I\n" \
176 " -v Don't use ^x or M-x escapes"
177 #define chattr_trivial_usage \
178 "[-R] [-+=AacDdijsStTu] [-v version] files..."
179 #define chattr_full_usage \
180 "Change file attributes on an ext2 fs\n\n" \
182 " - Remove attributes\n" \
183 " + Add attributes\n" \
184 " = Set attributes\n" \
186 " A Don't track atime\n" \
187 " a Append mode only\n" \
188 " c Enable compress\n" \
189 " D Write dir contents synchronously\n" \
190 " d Do not backup with dump\n" \
191 " i Cannot be modified (immutable)\n" \
192 " j Write all data to journal first\n" \
193 " s Zero disk storage when deleted\n" \
194 " S Write file contents synchronously\n" \
195 " t Disable tail-merging of partial blocks with other files\n" \
196 " u Allow file to be undeleted\n" \
198 " -R Recursively list subdirectories\n" \
199 " -v Set the file's version/generation number"
201 #define chgrp_trivial_usage \
202 "[-Rh"USE_DESKTOP("cvf")"]... GROUP FILE..."
203 #define chgrp_full_usage \
204 "Change the group membership of each FILE to GROUP" \
206 " -R Changes files and directories recursively\n" \
207 " -h Do not dereference symbolic links" \
209 "\n -c List changed files" \
210 "\n -v List all files" \
211 "\n -f Hide errors" \
213 #define chgrp_example_usage \
214 "$ ls -l /tmp/foo\n" \
215 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
216 "$ chgrp root /tmp/foo\n" \
217 "$ ls -l /tmp/foo\n" \
218 "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
220 #define chmod_trivial_usage \
221 "[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
222 #define chmod_full_usage \
223 "Each MODE is one or more of the letters ugoa, one of the\n" \
224 "symbols +-= and one or more of the letters rwxst" \
226 "\n -R Changes files and directories recursively" \
228 "\n -c List changed files" \
229 "\n -v List all files" \
230 "\n -f Hide errors" \
232 #define chmod_example_usage \
233 "$ ls -l /tmp/foo\n" \
234 "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
235 "$ chmod u+x /tmp/foo\n" \
236 "$ ls -l /tmp/foo\n" \
237 "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
238 "$ chmod 444 /tmp/foo\n" \
239 "$ ls -l /tmp/foo\n" \
240 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
242 #define chown_trivial_usage \
243 "[-Rh"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
244 #define chown_full_usage \
245 "Change the owner and/or group of each FILE to OWNER and/or GROUP" \
247 "\n -R Changes files and directories recursively" \
248 "\n -h Do not dereference symbolic links" \
250 "\n -c List changed files" \
251 "\n -v List all files" \
252 "\n -f Hide errors" \
254 #define chown_example_usage \
255 "$ ls -l /tmp/foo\n" \
256 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
257 "$ chown root /tmp/foo\n" \
258 "$ ls -l /tmp/foo\n" \
259 "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
260 "$ chown root.root /tmp/foo\n" \
262 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
264 #define chpst_trivial_usage \
265 "[-vP012] [-u user[:group]] [-U user[:group]] [-e dir] " \
266 "[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \
267 "[-p processes] [-f bytes] [-c bytes] prog args"
268 #define chpst_full_usage \
269 "Change the process state and run specified program" \
271 " -u user[:grp] Set uid and gid\n" \
272 " -U user[:grp] Set environment variables UID and GID\n" \
273 " -e dir Set environment variables as specified by files\n" \
274 " in the directory: file=1st_line_of_file\n" \
275 " -/ dir Chroot to dir\n" \
276 " -n inc Add inc to nice value\n" \
277 " -m bytes Limit data segment, stack segment, locked physical pages,\n" \
278 " and total of all segment per process to bytes bytes each\n" \
279 " -d bytes Limit data segment\n" \
280 " -o n Limit the number of open file descriptors per process to n\n" \
281 " -p n Limit number of processes per uid to n\n" \
282 " -f bytes Limit output file size to bytes bytes\n" \
283 " -c bytes Limit core file size to bytes bytes\n" \
285 " -P Run prog in a new process group\n" \
286 " -0 Close standard input\n" \
287 " -1 Close standard output\n" \
288 " -2 Close standard error"
289 #define setuidgid_trivial_usage \
291 #define setuidgid_full_usage \
292 "Set uid and gid to account's uid and gid, removing all supplementary\n" \
293 "groups, then run prog"
294 #define envuidgid_trivial_usage \
296 #define envuidgid_full_usage \
297 "Set $UID to account's uid and $GID to account's gid, then run prog"
298 #define envdir_trivial_usage \
300 #define envdir_full_usage \
301 "Set various environment variables as specified by files\n" \
302 "in the directory dir, then run prog"
303 #define softlimit_trivial_usage \
304 "[-a allbytes] [-c corebytes] [-d databytes] [-f filebytes] " \
305 "[-l lockbytes] [-m membytes] [-o openfiles] [-p processes] " \
306 "[-r residentbytes] [-s stackbytes] [-t cpusecs] prog args"
307 #define softlimit_full_usage \
308 "Set soft resource limits, then run prog" \
310 " -m n Same as -d n -s n -l n -a n\n" \
311 " -d n Limit the data segment per process to n bytes\n" \
312 " -s n Limit the stack segment per process to n bytes\n" \
313 " -l n Limit the locked physical pages per process to n bytes\n" \
314 " -a n Limit the total of all segments per process to n bytes\n" \
315 " -o n Limit the number of open file descriptors per process to n\n" \
316 " -p n Limit the number of processes per uid to n\n" \
317 "Options controlling file sizes:\n" \
318 " -f n Limit output file sizes to n bytes\n" \
319 " -c n Limit core file sizes to n bytes\n" \
320 "Efficiency opts:\n" \
321 " -r n Limit the resident set size to n bytes. This limit is not\n" \
322 " enforced unless physical memory is full\n" \
323 " -t n Limit the CPU time to n seconds. This limit is not enforced\n" \
324 " except that the process receives a SIGXCPU signal after n seconds\n" \
326 "Some options may have no effect on some operating systems\n" \
327 "n may be =, indicating that soft limit should be set equal to hard limit"
329 #define chroot_trivial_usage \
330 "NEWROOT [COMMAND...]"
331 #define chroot_full_usage \
332 "Run COMMAND with root directory set to NEWROOT"
333 #define chroot_example_usage \
334 "$ ls -l /bin/ls\n" \
335 "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
336 "# mount /dev/hdc1 /mnt -t minix\n" \
338 "# ls -l /bin/ls\n" \
339 "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
341 #define chvt_trivial_usage \
343 #define chvt_full_usage \
344 "Change the foreground virtual terminal to /dev/ttyN"
346 #define cksum_trivial_usage \
348 #define cksum_full_usage \
349 "Calculate the CRC32 checksums of FILES"
351 #define clear_trivial_usage \
353 #define clear_full_usage \
356 #define cmp_trivial_usage \
357 "[-l] [-s] FILE1 [FILE2]"
358 #define cmp_full_usage \
359 "Compares FILE1 vs stdin if FILE2 is not specified" \
361 " -l Write the byte numbers (decimal) and values (octal)\n" \
362 " for all differing bytes\n" \
363 " -s Quiet mode - do not print"
365 #define comm_trivial_usage \
367 #define comm_full_usage \
368 "Compare FILE1 to FILE2, or to stdin if - is specified" \
370 " -1 Suppress lines unique to FILE1\n" \
371 " -2 Suppress lines unique to FILE2\n" \
372 " -3 Suppress lines common to both files"
374 #define bbconfig_trivial_usage \
376 #define bbconfig_full_usage \
377 "Print the config file which built busybox"
379 #define bbsh_trivial_usage \
381 "or: bbsh -c command [args]..."
382 #define bbsh_full_usage \
383 "The bbsh shell (command interpreter)"
385 #define cp_trivial_usage \
386 "[OPTION]... SOURCE DEST"
387 #define cp_full_usage \
388 "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY" \
390 " -a Same as -dpR\n" \
391 " -d,-P Preserve links\n" \
392 " -H,-L Dereference all symlinks (implied by default)\n" \
393 " -p Preserve file attributes if possible\n" \
394 " -f Force, overwrite\n" \
395 " -i Interactive, prompt before overwrite\n" \
396 " -R,-r Copy directories recursively\n" \
397 " -l,-s Create (sym)links"
399 #define cpio_trivial_usage \
400 "-[dimtuv][F cpiofile]"
401 #define cpio_full_usage \
402 "Extract or list files from a cpio archive\n" \
403 "Main operation mode:\n" \
404 " d Make leading directories\n" \
406 " m Preserve mtime\n" \
409 " u Unconditional overwrite\n" \
412 #define crond_trivial_usage \
413 "-d[#] -c <crondir> -f -b"
414 #define crond_full_usage \
415 " -d [#] -l [#] -S -L logfile -f -b -c dir\n" \
416 " -d num Debug level\n" \
417 " -l num Log level (8 - default)\n" \
418 " -S Log to syslogd (default)\n" \
419 " -L file Log to file\n" \
420 " -f Run in foreground\n" \
421 " -b Run in background (default)\n" \
422 " -c dir Working dir"
424 #define crontab_trivial_usage \
425 "[-c dir] {file|-}|[-u|-l|-e|-d user]"
426 #define crontab_full_usage \
427 " File <opts> replace crontab from file\n" \
428 " - <opts> replace crontab from stdin\n" \
429 " -u user specify user\n" \
430 " -l [user] list crontab for user\n" \
431 " -e [user] edit crontab for user\n" \
432 " -d [user] delete crontab for user\n" \
433 " -c dir specify crontab directory"
436 #define cut_trivial_usage \
437 "[OPTION]... [FILE]..."
438 #define cut_full_usage \
439 "Print selected fields from each input FILE to standard output" \
441 " -b LIST Output only bytes from LIST\n" \
442 " -c LIST Output only characters from LIST\n" \
443 " -d CHAR Use CHAR instead of tab as the field delimiter\n" \
444 " -s Output only the lines containing delimiter\n" \
445 " -f N Print only these fields\n" \
447 #define cut_example_usage \
448 "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
450 "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
453 #define date_trivial_usage \
454 "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
455 #define date_full_usage \
456 "Display current time in the given FORMAT, or set system date" \
458 " -R Outputs RFC-822 compliant date string\n" \
459 " -d STRING Displays time described by STRING, not 'now'\n" \
460 USE_FEATURE_DATE_ISOFMT( \
461 " -I[TIMESPEC] Outputs an ISO-8601 compliant date/time string\n" \
462 " TIMESPEC='date' (or missing) for date only,\n" \
463 " 'hours', 'minutes', or 'seconds' for date and,\n" \
464 " time to the indicated precision\n" \
465 " -D hint Use 'hint' as date format, via strptime()\n" \
467 " -s Sets time described by STRING\n" \
468 " -r FILE Displays the last modification time of FILE\n" \
469 " -u Prints or sets Coordinated Universal Time"
470 #define date_example_usage \
472 "Wed Apr 12 18:52:41 MDT 2000\n"
474 #define dc_trivial_usage \
476 #define dc_full_usage \
477 "This is a Tiny RPN calculator that understands the\n" \
478 "following operations: +, add, -, sub, *, mul, /, div, %, mod, " \
479 "**, exp, and, or, not, eor.\n" \
480 "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16." \
482 "p - Prints the value on the top of the stack, without altering the stack\n" \
483 "f - Prints the entire contents of the stack without altering anything\n" \
484 "o - Pops the value off the top of the stack and uses it to set the output radix\n" \
485 " Only 10 and 16 are supported"
486 #define dc_example_usage \
489 "$ dc 8 8 \\* 2 2 + / p\n" \
495 "$ echo 72 9 div 8 mul p | dc\n" \
498 #define dd_trivial_usage \
499 "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
500 " [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]")
501 #define dd_full_usage \
502 "Copy a file with converting and formatting" \
504 " if=FILE Read from FILE instead of stdin\n" \
505 " of=FILE Write to FILE instead of stdout\n" \
506 " bs=N Read and write N bytes at a time\n" \
507 USE_FEATURE_DD_IBS_OBS( \
508 " ibs=N Read N bytes at a time\n") \
509 USE_FEATURE_DD_IBS_OBS( \
510 " obs=N Write N bytes at a time\n") \
511 " count=N Copy only N input blocks\n" \
512 " skip=N Skip N input blocks\n" \
513 " seek=N Skip N output blocks\n" \
514 USE_FEATURE_DD_IBS_OBS( \
515 " conv=notrunc Don't truncate output file\n" \
516 " conv=noerror Continue after read errors\n" \
517 " conv=sync Pad blocks with zeros\n") \
519 "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
520 "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)"
521 #define dd_example_usage \
522 "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
526 #define deallocvt_trivial_usage \
528 #define deallocvt_full_usage \
529 "Deallocate unused virtual terminal /dev/ttyN"
531 #define delgroup_trivial_usage \
533 #define delgroup_full_usage \
534 "Delete group GROUP from the system"
536 #define deluser_trivial_usage \
538 #define deluser_full_usage \
539 "Delete user USER from the system"
541 #define devfsd_trivial_usage \
543 USE_DEVFSD_FG_NP("[-fg][-np]" )
544 #define devfsd_full_usage \
545 "Manage devfs permissions and old device name symlinks" \
547 "\n mntpnt The mount point where devfs is mounted" \
548 "\n -v Print the protocol version numbers for devfsd" \
549 "\n and the kernel-side protocol version and exits" \
551 "\n -fg Run the daemon in the foreground" \
552 "\n -np Exit after parsing the configuration file" \
553 "\n and processing synthetic REGISTER events," \
554 "\n do not poll for events")
556 #define df_trivial_usage \
557 "[-" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILESYSTEM ...]"
558 #define df_full_usage \
559 "Print the filesystem space used and space available" \
561 USE_FEATURE_HUMAN_READABLE( \
562 "\n -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \
563 " -m Print sizes in megabytes\n" \
564 " -k Print sizes in kilobytes(default)") \
565 SKIP_FEATURE_HUMAN_READABLE( \
567 #define df_example_usage \
569 "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
570 "/dev/sda3 8690864 8553540 137324 98% /\n" \
571 "/dev/sda1 64216 36364 27852 57% /boot\n" \
573 "Filesystem 1k-blocks Used Available Use% Mounted on\n" \
574 "/dev/sda3 8690864 8553540 137324 98% /\n"
576 #define dhcprelay_trivial_usage \
577 "[client_device_list] [server_device]"
578 #define dhcprelay_full_usage \
579 "Relay dhcp requests from client devices to server device"
581 #define dhcprelay_trivial_usage \
582 "[client_device_list] [server_device]"
583 #define dhcprelay_full_usage \
584 "Relay dhcp requests from client devices to server device"
586 #define diff_trivial_usage \
587 "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
588 #define diff_full_usage \
589 "Compare files line by line and output the differences between them.\n" \
590 "This diff implementation only supports unified diffs." \
592 " -a Treat all files as text\n" \
593 " -b Ignore changes in the amount of whitespace\n" \
594 " -d Try hard to find a smaller set of changes\n" \
595 " -i Ignore case differences\n" \
596 " -L Use LABEL instead of the filename in the unified header\n" \
597 " -N Treat absent files as empty\n" \
598 " -q Output only whether files differ\n" \
599 " -r Recursively compare subdirectories\n" \
600 " -S Start with FILE when comparing directories\n" \
601 " -T Make tabs line up by prefixing a tab when necessary\n" \
602 " -s Report when two files are the same\n" \
603 " -t Expand tabs to spaces in output\n" \
604 " -U Output LINES lines of context\n" \
605 " -w Ignore all whitespace"
607 #define dirname_trivial_usage \
609 #define dirname_full_usage \
610 "Strip non-directory suffix from FILENAME"
611 #define dirname_example_usage \
612 "$ dirname /tmp/foo\n" \
614 "$ dirname /tmp/foo/\n" \
617 #define dmesg_trivial_usage \
618 "[-c] [-n LEVEL] [-s SIZE]"
619 #define dmesg_full_usage \
620 "Print or control the kernel ring buffer" \
622 " -c Clears the ring buffer's contents after printing\n" \
623 " -n LEVEL Sets console logging level\n" \
624 " -s SIZE Use a buffer of size SIZE"
626 #define dnsd_trivial_usage \
627 "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]"
628 #define dnsd_full_usage \
629 "Small and static DNS server daemon" \
631 " -c Config filename\n" \
632 " -t TTL in seconds\n" \
633 " -p Listening port\n" \
634 " -i Listening iface ip (default all)\n" \
637 #define dos2unix_trivial_usage \
639 #define dos2unix_full_usage \
640 "Convert FILE from dos format to unix format. When no option\n" \
641 "is given, the input is converted to the opposite output format.\n" \
642 "When no file is given, use stdin for input and stdout for output." \
644 " -u Output will be in UNIX format\n" \
645 " -d Output will be in DOS format"
647 #define dpkg_trivial_usage \
648 "[-ilCPru] [-F option] package_name"
649 #define dpkg_full_usage \
650 "Install, remove and manage Debian packages" \
652 " -i Install the package\n" \
653 " -l List of installed packages\n" \
654 " -C Configure an unpackaged package\n" \
655 " -F depends Ignore dependency problems\n" \
656 " -P Purge all files of a package\n" \
657 " -r Remove all but the configuration files for a package\n" \
658 " -u Unpack a package, but don't configure it"
660 #define dpkg_deb_trivial_usage \
661 "[-cefxX] FILE [argument]"
662 #define dpkg_deb_full_usage \
663 "Perform actions on Debian packages (.debs)" \
665 " -c List contents of filesystem tree\n" \
666 " -e Extract control files to [argument] directory\n" \
667 " -f Display control field name starting with [argument]\n" \
668 " -x Extract packages filesystem tree to directory\n" \
669 " -X Verbose extract"
670 #define dpkg_deb_example_usage \
671 "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
673 #define du_trivial_usage \
674 "[-aHLdclsx" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
675 #define du_full_usage \
676 "Summarize disk space used for each FILE and/or directory.\n" \
677 "Disk space is printed in units of " \
678 USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
679 SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
682 " -a Show sizes of files in addition to directories\n" \
683 " -H Follow symbolic links that are FILE command line args\n" \
684 " -L Follow all symbolic links encountered\n" \
685 " -d N Limit output to directories (and files with -a) of depth < N\n" \
686 " -c Output a grand total\n" \
687 " -l Count sizes many times if hard linked\n" \
688 " -s Display only a total for each argument\n" \
689 " -x Skip directories on different filesystems\n" \
690 USE_FEATURE_HUMAN_READABLE( \
691 " -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \
692 " -m Print sizes in megabytes\n" \
694 " -k Print sizes in kilobytes" \
695 USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("(default)")
696 #define du_example_usage \
699 "12 ./kernel-patches/CVS\n" \
700 "80 ./kernel-patches\n" \
703 "12 ./scripts/CVS\n" \
709 #define dumpkmap_trivial_usage \
711 #define dumpkmap_full_usage \
712 "Print out a binary keyboard translation table to standard output"
713 #define dumpkmap_example_usage \
714 "$ dumpkmap > keymap\n"
716 #define dumpleases_trivial_usage \
717 "[-r|-a] [-f LEASEFILE]"
718 #define dumpleases_full_usage \
719 "Display DHCP leases granted by udhcpd" \
721 " -f, --file=FILENAME Leases file to load\n" \
722 " -r, --remaining Interpret lease times as time remaining\n" \
723 " -a, --absolute Interpret lease times as expire time"
725 #define e2fsck_trivial_usage \
726 "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
727 "[-I inode_buffer_blocks] [-P process_inode_size] " \
728 "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
729 "[-E extended-options] device"
730 #define e2fsck_full_usage \
731 "Check ext2/ext3 file system" \
733 " -p Automatic repair (no questions)\n" \
734 " -n Make no changes to the filesystem\n" \
735 " -y Assume 'yes' to all questions\n" \
736 " -c Check for bad blocks and add them to the badblock list\n" \
737 " -f Force checking even if filesystem is marked clean\n" \
739 " -b superblock Use alternative superblock\n" \
740 " -B blocksize Force blocksize when looking for superblock\n" \
741 " -j journal Set location of the external journal\n" \
742 " -l file Add to badblocks list\n" \
743 " -L file Set badblocks list"
745 #define echo_trivial_usage \
746 USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG ...]"
747 #define echo_full_usage \
748 "Print the specified ARGs to stdout" \
749 USE_FEATURE_FANCY_ECHO( \
751 " -n Suppress trailing newline\n" \
752 " -e Interpret backslash-escaped characters (i.e., \\t=tab)\n" \
753 " -E Disable interpretation of backslash-escaped characters" \
755 #define echo_example_usage \
756 "$ echo \"Erik is cool\"\n" \
758 USE_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
762 "$ echo \"Erik\\nis\\ncool\"\n" \
763 "Erik\\nis\\ncool\n")
765 #define eject_trivial_usage \
767 #define eject_full_usage \
768 "Eject specified DEVICE (or default /dev/cdrom)" \
771 " -T Open/close tray (toggle)"
773 #define ed_trivial_usage ""
774 #define ed_full_usage ""
776 #define env_trivial_usage \
777 "[-iu] [-] [name=value]... [command]"
778 #define env_full_usage \
779 "Print the current environment or run a program after setting\n" \
780 "up the specified environment" \
782 " -, -i Start with an empty environment\n" \
783 " -u Remove variable from the environment"
785 #define ether_wake_trivial_usage \
786 "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
787 #define ether_wake_full_usage \
788 "Send a magic packet to wake up sleeping machines.\n" \
789 "MAC must be a station address (00:11:22:33:44:55) or\n" \
790 "a hostname with a known 'ethers' entry." \
792 " -b Send wake-up packet to the broadcast address\n" \
793 " -i iface Use interface ifname instead of the default \"eth0\"\n" \
794 " -p pass Append the four or six byte password PW to the packet"
796 #define expr_trivial_usage \
798 #define expr_full_usage \
799 "Print the value of EXPRESSION to standard output.\n\n" \
800 "EXPRESSION may be:\n" \
801 " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
802 " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
803 " ARG1 < ARG2 ARG1 is less than ARG2\n" \
804 " ARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \
805 " ARG1 = ARG2 ARG1 is equal to ARG2\n" \
806 " ARG1 != ARG2 ARG1 is unequal to ARG2\n" \
807 " ARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \
808 " ARG1 > ARG2 ARG1 is greater than ARG2\n" \
809 " ARG1 + ARG2 Sum of ARG1 and ARG2\n" \
810 " ARG1 - ARG2 Difference of ARG1 and ARG2\n" \
811 " ARG1 * ARG2 Product of ARG1 and ARG2\n" \
812 " ARG1 / ARG2 Quotient of ARG1 divided by ARG2\n" \
813 " ARG1 % ARG2 Remainder of ARG1 divided by ARG2\n" \
814 " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
815 " match STRING REGEXP Same as STRING : REGEXP\n" \
816 " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
817 " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
818 " length STRING Length of STRING\n" \
819 " quote TOKEN Interpret TOKEN as a string, even if\n" \
820 " it is a keyword like 'match' or an\n" \
821 " operator like '/'\n" \
822 " (EXPRESSION) Value of EXPRESSION\n\n" \
823 "Beware that many operators need to be escaped or quoted for shells.\n" \
824 "Comparisons are arithmetic if both ARGs are numbers, else\n" \
825 "lexicographical. Pattern matches return the string matched between\n" \
826 "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
827 "of characters matched or 0."
829 #define fakeidentd_trivial_usage \
830 "[-fiw] [-b ADDR] [STRING]"
831 #define fakeidentd_full_usage \
832 "Provide fake ident (auth) service" \
834 "\n -f Run in foreground" \
836 "\n -w Inetd 'wait' mode" \
837 "\n -b ADDR Bind to specified address" \
838 "\n STRING Ident answer string (default is 'nobody')"
840 #define false_trivial_usage \
842 #define false_full_usage \
843 "Return an exit code of FALSE (1)"
844 #define false_example_usage \
849 #define fbset_trivial_usage \
851 #define fbset_full_usage \
852 "Show and modify frame buffer settings"
853 #define fbset_example_usage \
855 "mode \"1024x768-76\"\n" \
856 " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
857 " geometry 1024 768 1024 768 16\n" \
858 " timings 12714 128 32 16 4 128 4\n" \
860 " rgba 5/11,6/5,5/0,0/0\n" \
863 #define fdflush_trivial_usage \
865 #define fdflush_full_usage \
866 "Force floppy disk drive to detect disk change"
868 #define fdformat_trivial_usage \
870 #define fdformat_full_usage \
871 "Format floppy disk" \
873 " -n Don't verify after format"
875 #define fdisk_trivial_usage \
876 "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
877 #define fdisk_full_usage \
878 "Change partition table" \
880 " -l List partition table(s)\n" \
881 " -u Give Start and End in sector (instead of cylinder) units\n" \
882 " -s PARTITION Give partition size(s) in blocks\n" \
883 " -b 2048 (for certain MO disks) use 2048-byte sectors\n" \
884 " -C CYLINDERS Set the number of cylinders\n" \
885 " -H HEADS Set the number of heads\n" \
886 " -S SECTORS Set the number of sectors\n" \
887 " -v Give fdisk version"
889 #define find_trivial_usage \
890 "[PATH...] [EXPRESSION]"
891 #define find_full_usage \
892 "Search for files in a directory hierarchy. The default PATH is\n" \
893 "the current directory; default EXPRESSION is '-print'\n" \
894 "\nEXPRESSION may consist of:\n" \
895 " -follow Dereference symbolic links\n" \
896 " -name PATTERN File name (leading directories removed) matches PATTERN\n" \
897 " -print Print (default and assumed)" \
898 USE_FEATURE_FIND_PRINT0( \
899 "\n -print0 Delimit output with null characters rather than" \
901 ) USE_FEATURE_FIND_TYPE( \
902 "\n -type X Filetype matches X (where X is one of: f,d,l,b,c,...)" \
903 ) USE_FEATURE_FIND_PERM( \
904 "\n -perm PERMS Permissions match any of (+NNN); all of (-NNN);" \
905 "\n or exactly (NNN)" \
906 ) USE_FEATURE_FIND_MTIME( \
907 "\n -mtime DAYS Modified time is greater than (+N); less than (-N);" \
908 "\n Or exactly (N) days" \
909 ) USE_FEATURE_FIND_MMIN( \
910 "\n -mmin MINS Modified time is greater than (+N); less than (-N);" \
911 "\n or exactly (N) minutes" \
912 ) USE_FEATURE_FIND_NEWER( \
913 "\n -newer FILE Modified time is more recent than FILE's" \
914 ) USE_FEATURE_FIND_INUM( \
915 "\n -inum N File has inode number N" \
916 ) USE_FEATURE_FIND_EXEC( \
917 "\n -exec CMD Execute CMD with all instances of {} replaced by the" \
918 "\n files matching EXPRESSION" \
920 "\n -size N File size is N" \
921 "\n -prune Stop traversing current subtree" \
925 #define find_example_usage \
926 "$ find / -name passwd\n" \
929 #define fold_trivial_usage \
930 "[-bs] [-w WIDTH] [FILE]"
931 #define fold_full_usage \
932 "Wrap input lines in each FILE (standard input by default), writing to\n" \
935 " -b Count bytes rather than columns\n" \
936 " -s Break at spaces\n" \
937 " -w Use WIDTH columns instead of 80"
939 #define free_trivial_usage \
941 #define free_full_usage \
942 "Display the amount of free and used system memory"
943 #define free_example_usage \
945 " total used free shared buffers\n" \
946 " Mem: 257628 248724 8904 59644 93124\n" \
947 " Swap: 128516 8404 120112\n" \
948 "Total: 386144 257128 129016\n" \
950 #define freeramdisk_trivial_usage \
952 #define freeramdisk_full_usage \
953 "Free all memory used by the specified ramdisk"
954 #define freeramdisk_example_usage \
955 "$ freeramdisk /dev/ram2\n"
957 #define fsck_trivial_usage \
958 "[-ANPRTV] [ -C fd ] [-t fstype] [fs-options] [filesys ...]"
959 #define fsck_full_usage \
960 "Check and repair filesystems" \
962 " -A Walk /etc/fstab and check all filesystems\n" \
963 " -N Don't execute, just show what would be done\n" \
964 " -P When using -A, check filesystems in parallel\n" \
965 " -R When using -A, skip the root filesystem\n" \
966 " -T Don't show title on startup\n" \
968 " -C n Write status information to specified filedescriptor\n" \
969 " -t type List of filesystem types to check"
971 #define fsck_minix_trivial_usage \
972 "[-larvsmf] /dev/name"
973 #define fsck_minix_full_usage \
974 "Perform a consistency check for MINIX filesystems" \
976 " -l Lists all filenames\n" \
977 " -r Perform interactive repairs\n" \
978 " -a Perform automatic repairs\n" \
980 " -s Outputs super-block information\n" \
981 " -m Activates MINIX-like \"mode not cleared\" warnings\n" \
982 " -f Force file system check"
984 #define ftpget_trivial_usage \
985 "[options] remote-host local-file remote-file"
986 #define ftpget_full_usage \
987 "Retrieve a remote file via FTP" \
989 " -c, --continue Continue a previous transfer\n" \
990 " -v, --verbose Verbose\n" \
991 " -u, --username Username to be used\n" \
992 " -p, --password Password to be used\n" \
993 " -P, --port Port number to be used"
995 #define ftpput_trivial_usage \
996 "[options] remote-host remote-file local-file"
997 #define ftpput_full_usage \
998 "Store a local file on a remote machine via FTP" \
1000 " -v, --verbose Verbose\n" \
1001 " -u, --username Username to be used\n" \
1002 " -p, --password Password to be used\n" \
1003 " -P, --port Port number to be used"
1005 #define fuser_trivial_usage \
1006 "[options] file OR port/proto"
1007 #define fuser_full_usage \
1009 " -m Show all processes on the same mounted fs\n" \
1010 " -k Kill all processes that match\n" \
1011 " -s Don't print or kill anything\n" \
1012 " -4 When using port/proto only search IPv4 space\n" \
1013 " -6 When using port/proto only search IPv6 space\n" \
1014 " -SIGNAL When used with -k, this signal will be used to kill"
1016 #define getopt_trivial_usage \
1018 #define getopt_full_usage \
1019 "Parse command options\n" \
1020 " -a, --alternative Allow long options starting with single -\n" \
1021 " -l, --longoptions=longopts Long options to be recognized\n" \
1022 " -n, --name=progname The name under which errors are reported\n" \
1023 " -o, --options=optstring Short options to be recognized\n" \
1024 " -q, --quiet Disable error reporting by getopt(3)\n" \
1025 " -Q, --quiet-output No normal output\n" \
1026 " -s, --shell=shell Set shell quoting conventions\n" \
1027 " -T, --test Test for getopt(1) version\n" \
1028 " -u, --unquoted Do not quote the output"
1029 #define getopt_example_usage \
1030 "$ cat getopt.test\n" \
1032 "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
1033 " -n 'example.busybox' -- \"$@\"`\n" \
1034 "if [ $? != 0 ] ; then exit 1 ; fi\n" \
1035 "eval set -- \"$GETOPT\"\n" \
1036 "while true ; do\n" \
1038 " -a|--a-long) echo \"Option a\" ; shift ;;\n" \
1039 " -b|--b-long) echo \"Option b, argument '$2'\" ; shift 2 ;;\n" \
1041 " case \"$2\" in\n" \
1042 " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \
1043 " *) echo \"Option c, argument '$2'\" ; shift 2 ;;\n" \
1045 " --) shift ; break ;;\n" \
1046 " *) echo \"Internal error!\" ; exit 1 ;;\n" \
1050 #define getty_trivial_usage \
1051 "[OPTIONS]... baud_rate,... line [termtype]"
1052 #define getty_full_usage \
1053 "Open a tty, prompt for a login name, then invoke /bin/login" \
1055 " -h Enable hardware (RTS/CTS) flow control\n" \
1056 " -i Do not display /etc/issue before running login\n" \
1057 " -L Local line, so do not do carrier detect\n" \
1058 " -m Get baud rate from modem's CONNECT status message\n" \
1059 " -w Wait for a CR or LF before sending /etc/issue\n" \
1060 " -n Do not prompt the user for a login name\n" \
1061 " -f issue_file Display issue_file instead of /etc/issue\n" \
1062 " -l login_app Invoke login_app instead of /bin/login\n" \
1063 " -t timeout Terminate after timeout if no username is read\n" \
1064 " -I initstring Sets the init string to send before anything else\n" \
1065 " -H login_host Log login_host into the utmp file as the hostname"
1067 #define grep_trivial_usage \
1069 USE_FEATURE_GREP_EGREP_ALIAS("E") \
1070 USE_FEATURE_GREP_CONTEXT("ABC") \
1071 "] PATTERN [FILEs...]"
1072 #define grep_full_usage \
1073 "Search for PATTERN in each FILE or standard input" \
1075 " -H Prefix output lines with filename where match was found\n" \
1076 " -h Suppress the prefixing filename on output\n" \
1077 " -r Recurse subdirectories\n" \
1078 " -i Ignore case distinctions\n" \
1079 " -l List names of files that match\n" \
1080 " -L List names of files that do not match\n" \
1081 " -n Print line number with output lines\n" \
1082 " -q Be quiet. Returns 0 if PATTERN was found, 1 otherwise\n" \
1083 " -v Select non-matching lines\n" \
1084 " -s Suppress file open/read error messages\n" \
1085 " -c Only print count of matching lines\n" \
1086 " -f Read PATTERN from file\n" \
1087 " -o Show only the part of a line that matches PATTERN\n" \
1088 " -e PATTERN is a regular expression\n" \
1089 " -F PATTERN is a set of newline-separated strings" \
1090 USE_FEATURE_GREP_EGREP_ALIAS( \
1091 "\n -E PATTERN is an extended regular expression") \
1092 USE_FEATURE_GREP_CONTEXT( \
1093 "\n -A Print NUM lines of trailing context") \
1094 USE_FEATURE_GREP_CONTEXT( \
1095 "\n -B Print NUM lines of leading context") \
1096 USE_FEATURE_GREP_CONTEXT( \
1097 "\n -C Print NUM lines of output context")
1099 #define grep_example_usage \
1100 "$ grep root /etc/passwd\n" \
1101 "root:x:0:0:root:/root:/bin/bash\n" \
1102 "$ grep ^[rR]oo. /etc/passwd\n" \
1103 "root:x:0:0:root:/root:/bin/bash\n"
1105 #define gunzip_trivial_usage \
1107 #define gunzip_full_usage \
1108 "Uncompress FILE (or standard input if FILE is '-')" \
1110 " -c Write output to standard output\n" \
1111 " -f Force read when source is a terminal\n" \
1112 " -t Test compressed file integrity"
1113 #define gunzip_example_usage \
1114 "$ ls -la /tmp/BusyBox*\n" \
1115 "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
1116 "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
1117 "$ ls -la /tmp/BusyBox*\n" \
1118 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
1120 #define gzip_trivial_usage \
1121 "[OPTION]... [FILE]..."
1122 #define gzip_full_usage \
1123 "Compress FILE(s) with maximum compression.\n" \
1124 "When FILE is '-' or unspecified, reads standard input. Implies -c." \
1126 " -c Write output to standard output instead of FILE.gz\n" \
1127 " -d Decompress\n" \
1128 " -f Force write when destination is a terminal"
1129 #define gzip_example_usage \
1130 "$ ls -la /tmp/busybox*\n" \
1131 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
1132 "$ gzip /tmp/busybox.tar\n" \
1133 "$ ls -la /tmp/busybox*\n" \
1134 "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
1136 #define halt_trivial_usage \
1137 "[-d<delay>] [-n<nosync>] [-f<force>]"
1138 #define halt_full_usage \
1141 " -d Delay interval for halting\n" \
1142 " -n No call to sync()\n" \
1143 " -f Force halt (don't go through init)"
1145 #define hdparm_trivial_usage \
1146 "[options] [device] .."
1147 #define hdparm_full_usage \
1148 USE_FEATURE_HDPARM_GET_IDENTITY( \
1149 "If no device name is specified try to read from stdin.\n\n") \
1151 " -a Get/set fs readahead\n" \
1152 " -A Set drive read-lookahead flag (0/1)\n" \
1153 " -b Get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
1154 " -B Set Advanced Power Management setting (1-255)\n" \
1155 " -c Get/set IDE 32-bit IO setting\n" \
1156 " -C Check IDE power mode status\n" \
1157 USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \
1158 " -d Get/set using_dma flag\n") \
1159 " -D Enable/disable drive defect-mgmt\n" \
1160 " -f Flush buffer cache for device on exit\n" \
1161 " -g Display drive geometry\n" \
1162 " -h Display terse usage information\n" \
1163 USE_FEATURE_HDPARM_GET_IDENTITY( \
1164 " -i Display drive identification\n") \
1165 USE_FEATURE_HDPARM_GET_IDENTITY( \
1166 " -I Detailed/current information directly from drive\n") \
1167 " -k Get/set keep_settings_over_reset flag (0/1)\n" \
1168 " -K Set drive keep_features_over_reset flag (0/1)\n" \
1169 " -L Set drive doorlock (0/1) (removable harddisks only)\n" \
1170 " -m Get/set multiple sector count\n" \
1171 " -n Get/set ignore-write-errors flag (0/1)\n" \
1172 " -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
1173 " -P Set drive prefetch count\n" \
1174 " -q Change next setting quietly\n" \
1175 " -Q Get/set DMA tagged-queuing depth (if supported)\n" \
1176 " -r Get/set readonly flag (DANGEROUS to set)\n" \
1177 USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
1178 " -R Register an IDE interface (DANGEROUS)\n") \
1179 " -S Set standby (spindown) timeout\n" \
1180 " -t Perform device read timings\n" \
1181 " -T Perform cache read timings\n" \
1182 " -u Get/set unmaskirq flag (0/1)\n" \
1183 USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
1184 " -U Un-register an IDE interface (DANGEROUS)\n") \
1185 " -v Defaults; same as -mcudkrag for IDE drives\n" \
1186 " -V Display program version and exit immediately\n" \
1187 USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
1188 " -w Perform device reset (DANGEROUS)\n") \
1189 " -W Set drive write-caching flag (0/1) (DANGEROUS)\n" \
1190 USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
1191 " -x Tristate device for hotswap (0/1) (DANGEROUS)\n") \
1192 " -X Set IDE xfer mode (DANGEROUS)\n" \
1193 " -y Put IDE drive in standby mode\n" \
1194 " -Y Put IDE drive to sleep\n" \
1195 " -Z Disable Seagate auto-powersaving mode\n" \
1196 " -z Re-read partition table"
1198 #define head_trivial_usage \
1199 "[OPTION]... [FILE]..."
1200 #define head_full_usage \
1201 "Print first 10 lines of each FILE to standard output.\n" \
1202 "With more than one FILE, precede each with a header giving the\n" \
1203 "file name. With no FILE, or when FILE is -, read standard input." \
1205 "\n -n NUM Print first NUM lines instead of first 10" \
1206 USE_FEATURE_FANCY_HEAD( \
1207 "\n -c NUM Output the first NUM bytes" \
1208 "\n -q Never output headers giving file names" \
1209 "\n -v Always output headers giving file names")
1210 #define head_example_usage \
1211 "$ head -n 2 /etc/passwd\n" \
1212 "root:x:0:0:root:/root:/bin/bash\n" \
1213 "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
1215 #define hexdump_trivial_usage \
1216 "[-[bcCdefnosvx]] [OPTION] FILE"
1217 #define hexdump_full_usage \
1218 "Display file(s) or standard input in a user specified format" \
1220 " -b One-byte octal display\n" \
1221 " -c One-byte character display\n" \
1222 " -C Canonical hex+ASCII, 16 bytes per line\n" \
1223 " -d Two-byte decimal display\n" \
1224 " -e FORMAT STRING\n" \
1225 " -f FORMAT FILE\n" \
1226 " -n LENGTH Interpret only length bytes of input\n" \
1227 " -o Two-byte octal display\n" \
1228 " -s OFFSET Skip offset bytes\n" \
1229 " -v Display all input data\n" \
1230 " -x Two-byte hexadecimal display"
1232 #define hostid_trivial_usage \
1234 #define hostid_full_usage \
1235 "Print out a unique 32-bit identifier for the machine"
1237 #define hostname_trivial_usage \
1238 "[OPTION] {hostname | -F FILE}"
1239 #define hostname_full_usage \
1240 "Get or set the hostname or DNS domain name. If a hostname is given\n" \
1241 "(or FILE with the -F parameter), the host name will be set." \
1244 " -i Addresses for the hostname\n" \
1245 " -d DNS domain name\n" \
1246 " -f Fully qualified domain name\n" \
1247 " -F FILE Use the contents of FILE to specify the hostname"
1248 #define hostname_example_usage \
1252 #define httpd_trivial_usage \
1253 "[-c <conf file>]" \
1256 USE_FEATURE_HTTPD_SETUID(" [-u user[:grp]]") \
1257 USE_FEATURE_HTTPD_BASIC_AUTH(" [-r <realm>]") \
1258 USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \
1261 #define httpd_full_usage \
1262 "Listen for incoming http server requests" \
1264 " -c FILE Specifies configuration file. (default httpd.conf)\n" \
1265 " -p PORT Server port (default 80)\n" \
1266 " -i Assume that we are started from inetd\n" \
1267 " -f Do not daemonize\n" \
1268 USE_FEATURE_HTTPD_SETUID( \
1269 " -u USER[:GRP] Set uid/gid after binding to port\n") \
1270 USE_FEATURE_HTTPD_BASIC_AUTH( \
1271 " -r REALM Authentication Realm for Basic Authentication\n") \
1272 USE_FEATURE_HTTPD_AUTH_MD5( \
1273 " -m PASS Crypt PASS with md5 algorithm\n") \
1274 " -h HOME Specifies http HOME directory (default ./)\n" \
1275 " -e STRING HTML encode STRING\n" \
1276 " -d STRING URL decode STRING"
1278 #define hwclock_trivial_usage \
1279 "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
1280 #define hwclock_full_usage \
1281 "Query and set the hardware clock (RTC)" \
1283 " -r Read hardware clock and print result\n" \
1284 " -s Set the system time from the hardware clock\n" \
1285 " -w Set the hardware clock to the current system time\n" \
1286 " -u The hardware clock is kept in coordinated universal time\n" \
1287 " -l The hardware clock is kept in local time"
1289 #define id_trivial_usage \
1290 "[OPTIONS]... [USERNAME]"
1291 #define id_full_usage \
1292 "Print information for USERNAME or the current user" \
1295 " -c Prints only the security context\n") \
1296 " -g Prints only the group ID\n" \
1297 " -u Prints only the user ID\n" \
1298 " -n Print a name instead of a number\n" \
1299 " -r Prints the real user ID instead of the effective ID"
1300 #define id_example_usage \
1302 "uid=1000(andersen) gid=1000(andersen)\n"
1304 #define ifconfig_trivial_usage \
1305 USE_FEATURE_IFCONFIG_STATUS("[-a]") " <interface> [<address>]"
1306 #define ifconfig_full_usage \
1307 "Configure a network interface" \
1310 " [add <address>[/<prefixlen>]]\n") \
1312 " [del <address>[/<prefixlen>]]\n") \
1313 " [[-]broadcast [<address>]] [[-]pointopoint [<address>]]\n" \
1314 " [netmask <address>] [dstaddr <address>]\n" \
1315 USE_FEATURE_IFCONFIG_SLIP( \
1316 " [outfill <NN>] [keepalive <NN>]\n") \
1317 " " USE_FEATURE_IFCONFIG_HW("[hw ether <address>] ") "[metric <NN>] [mtu <NN>]\n" \
1318 " [[-]trailers] [[-]arp] [[-]allmulti]\n" \
1319 " [multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]\n" \
1320 USE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
1321 " [mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \
1324 #define ifup_trivial_usage \
1325 "<-ahinv> <ifaces...>"
1326 #define ifup_full_usage \
1328 " -a De/configure all interfaces automatically\n" \
1329 " -i FILE Use FILE for interface definitions\n" \
1330 " -n Print out what would happen, but don't do it\n" \
1331 " (note that this option doesn't disable mappings)\n" \
1332 " -v Print out what would happen before doing it\n" \
1333 " -m Don't run any mappings\n" \
1334 " -f Force de/configuration"
1336 #define ifdown_trivial_usage \
1337 "<-ahinv> <ifaces...>"
1338 #define ifdown_full_usage \
1340 " -a De/configure all interfaces automatically\n" \
1341 " -i FILE Use FILE for interface definitions\n" \
1342 " -n Print out what would happen, but don't do it\n" \
1343 " (note that this option doesn't disable mappings)\n" \
1344 " -v Print out what would happen before doing it\n" \
1345 " -m Don't run any mappings\n" \
1346 " -f Force de/configuration"
1348 #define inetd_trivial_usage \
1349 "[-f] [-q len] [conf]"
1350 #define inetd_full_usage \
1351 "Listen for network connections and launch programs" \
1353 " -f Run in foreground\n" \
1354 " -q N Set the size of the socket listen queue to N\n" \
1357 #define init_trivial_usage \
1359 #define init_full_usage \
1360 "Init is the parent of all processes"
1361 #define init_notes_usage \
1362 "This version of init is designed to be run only by the kernel.\n" \
1364 "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
1365 "the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \
1366 "runlevels, use sysvinit.\n" \
1368 "BusyBox init works just fine without an inittab. If no inittab is found,\n" \
1369 "it has the following default behavior:\n" \
1371 " ::sysinit:/etc/init.d/rcS\n" \
1372 " ::askfirst:/bin/sh\n" \
1373 " ::ctrlaltdel:/sbin/reboot\n" \
1374 " ::shutdown:/sbin/swapoff -a\n" \
1375 " ::shutdown:/bin/umount -a -r\n" \
1376 " ::restart:/sbin/init\n" \
1378 "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
1380 " tty2::askfirst:/bin/sh\n" \
1381 " tty3::askfirst:/bin/sh\n" \
1382 " tty4::askfirst:/bin/sh\n" \
1384 "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
1386 " <id>:<runlevels>:<action>:<process>\n" \
1390 " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
1391 " The id field is used by BusyBox init to specify the controlling tty for\n" \
1392 " the specified process to run on. The contents of this field are\n" \
1393 " appended to \"/dev/\" and used as-is. There is no need for this field to\n" \
1394 " be unique, although if it isn't you may have strange results. If this\n" \
1395 " field is left blank, the controlling tty is set to the console. Also\n" \
1396 " note that if BusyBox detects that a serial console is in use, then only\n" \
1397 " entries whose controlling tty is either the serial console or /dev/null\n" \
1398 " will be run. BusyBox init does nothing with utmp. We don't need no\n" \
1399 " stinkin' utmp.\n" \
1403 " The runlevels field is completely ignored.\n" \
1407 " Valid actions include: sysinit, respawn, askfirst, wait,\n" \
1408 " once, restart, ctrlaltdel, and shutdown.\n" \
1410 " The available actions can be classified into two groups: actions\n" \
1411 " that are run only once, and actions that are re-run when the specified\n" \
1412 " process exits.\n" \
1414 " Run only-once actions:\n" \
1416 " 'sysinit' is the first item run on boot. init waits until all\n" \
1417 " sysinit actions are completed before continuing. Following the\n" \
1418 " completion of all sysinit actions, all 'wait' actions are run.\n" \
1419 " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
1420 " the specified task completes. 'once' actions are asynchronous,\n" \
1421 " therefore, init does not wait for them to complete. 'restart' is\n" \
1422 " the action taken to restart the init process. By default this should\n" \
1423 " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
1424 " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
1425 " actions are run when the system detects that someone on the system\n" \
1426 " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
1427 " wants to run 'reboot' at this point to cause the system to reboot.\n" \
1428 " Finally the 'shutdown' action specifies the actions to taken when\n" \
1429 " init is told to reboot. Unmounting filesystems and disabling swap\n" \
1430 " is a very good here.\n" \
1432 " Run repeatedly actions:\n" \
1434 " 'respawn' actions are run after the 'once' actions. When a process\n" \
1435 " started with a 'respawn' action exits, init automatically restarts\n" \
1436 " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
1437 " respawning out of control. The 'askfirst' actions acts just like\n" \
1438 " respawn, except that before running the specified process it\n" \
1439 " displays the line \"Please press Enter to activate this console.\"\n" \
1440 " and then waits for the user to press enter before starting the\n" \
1441 " specified process.\n" \
1443 " Unrecognized actions (like initdefault) will cause init to emit an\n" \
1444 " error message, and then go along with its business. All actions are\n" \
1445 " run in the order they appear in /etc/inittab.\n" \
1449 " Specifies the process to be executed and its command line.\n" \
1451 "Example /etc/inittab file:\n" \
1453 " # This is run first except when booting in single-user mode\n" \
1455 " ::sysinit:/etc/init.d/rcS\n" \
1457 " # /bin/sh invocations on selected ttys\n" \
1459 " # Start an \"askfirst\" shell on the console (whatever that may be)\n" \
1460 " ::askfirst:-/bin/sh\n" \
1461 " # Start an \"askfirst\" shell on /dev/tty2-4\n" \
1462 " tty2::askfirst:-/bin/sh\n" \
1463 " tty3::askfirst:-/bin/sh\n" \
1464 " tty4::askfirst:-/bin/sh\n" \
1466 " # /sbin/getty invocations for selected ttys\n" \
1468 " tty4::respawn:/sbin/getty 38400 tty4\n" \
1469 " tty5::respawn:/sbin/getty 38400 tty5\n" \
1472 " # Example of how to put a getty on a serial line (for a terminal)\n" \
1474 " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
1475 " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
1477 " # Example how to put a getty on a modem line\n" \
1478 " #::respawn:/sbin/getty 57600 ttyS2\n" \
1480 " # Stuff to do when restarting the init process\n" \
1481 " ::restart:/sbin/init\n" \
1483 " # Stuff to do before rebooting\n" \
1484 " ::ctrlaltdel:/sbin/reboot\n" \
1485 " ::shutdown:/bin/umount -a -r\n" \
1486 " ::shutdown:/sbin/swapoff -a\n"
1488 #define insmod_trivial_usage \
1489 "[OPTION]... MODULE [symbol=value]..."
1490 #define insmod_full_usage \
1491 "Load the specified kernel modules into the kernel" \
1493 " -f Force module to load into the wrong kernel version\n" \
1494 " -k Make module autoclean-able\n" \
1495 " -v Verbose output\n" \
1496 " -q Quiet output\n" \
1497 " -L Lock to prevent simultaneous loads of a module\n" \
1498 USE_FEATURE_INSMOD_LOAD_MAP( \
1499 " -m Output load map to stdout\n") \
1500 " -o NAME Set internal module name to NAME\n" \
1501 " -x Do not export externs"
1503 #define install_trivial_usage \
1504 "[-cgmops] [sources] <dest|directory>"
1505 #define install_full_usage \
1506 "Copy files and set attributes" \
1508 " -c Copy the file, default\n" \
1509 " -d Create directories\n" \
1510 " -g Set group ownership\n" \
1511 " -m Set permission modes\n" \
1512 " -o Set ownership\n" \
1513 " -p Preserve date\n" \
1514 " -s Strip symbol tables"
1516 #define ip_trivial_usage \
1517 "[OPTIONS] {address | link | route | tunnel | rule} {COMMAND}"
1518 #define ip_full_usage \
1519 "ip [OPTIONS] OBJECT {COMMAND}\n" \
1520 "where OBJECT := {link | addr | route | tunnel |rule}\n" \
1521 "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }"
1523 #define ipaddr_trivial_usage \
1524 "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
1525 " [ dev STRING ] [ to PREFIX ] }"
1526 #define ipaddr_full_usage \
1527 "ipaddr {add|delete} IFADDR dev STRING\n" \
1528 "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
1529 " [ to PREFIX ] [ label PATTERN ]\n" \
1530 " IFADDR := PREFIX | ADDR peer PREFIX\n" \
1531 " [ broadcast ADDR ] [ anycast ADDR ]\n" \
1532 " [ label STRING ] [ scope SCOPE-ID ]\n" \
1533 " SCOPE-ID := [ host | link | global | NUMBER ]"
1535 #define ipcalc_trivial_usage \
1536 "[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
1537 #define ipcalc_full_usage \
1538 "Calculate IP network settings from a IP address" \
1540 "\n -b --broadcast Display calculated broadcast address" \
1541 "\n -n --network Display calculated network address" \
1542 "\n -m --netmask Display default netmask for IP" \
1543 USE_FEATURE_IPCALC_FANCY( \
1544 "\n -p --prefix Display the prefix for IP/NETMASK" \
1545 "\n -h --hostname Display first resolved host name" \
1546 "\n -s --silent Don't ever display error messages")
1548 #define ipcrm_trivial_usage \
1549 "[-[MQS] key] [-[mqs] id]"
1550 #define ipcrm_full_usage \
1551 "The upper-case options MQS are used to remove a shared memory segment by a\n" \
1552 "segment by a shmkey value. The lower-case options mqs are used\n" \
1553 "to remove a segment by shmid value.\n" \
1555 " -[mM] Remove the memory segment after the last detach\n" \
1556 " -[qQ] Remove the message queue\n" \
1557 " -[sS] Remove the semaphore"
1559 #define ipcs_trivial_usage \
1560 "[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
1561 #define ipcs_full_usage \
1562 " -i Specify a specific resource id\n" \
1563 "Resource specification:\n" \
1564 " -m Shared memory segments\n" \
1565 " -q Message queues\n" \
1566 " -s Semaphore arrays\n" \
1567 " -a All (default)\n" \
1568 "Output format:\n" \
1575 #define iplink_trivial_usage \
1576 "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
1577 #define iplink_full_usage \
1578 "iplink set DEVICE { up | down | arp { on | off } |\n" \
1579 " dynamic { on | off } |\n" \
1581 "iplink show [ DEVICE ]"
1583 #define iproute_trivial_usage \
1584 "{ list | flush | { add | del | change | append |\n" \
1585 " replace | monitor } ROUTE }"
1586 #define iproute_full_usage \
1587 "iproute { list | flush } SELECTOR\n" \
1588 "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
1589 " [ oif STRING ] [ tos TOS ]\n" \
1590 "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
1591 " SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
1592 " ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]"
1594 #define iprule_trivial_usage \
1595 "{[ list | add | del ] RULE}"
1596 #define iprule_full_usage \
1597 "iprule [ list | add | del ] SELECTOR ACTION\n" \
1598 " SELECTOR := [ from PREFIX ] [ to PREFIX ] [ tos TOS ] [ fwmark FWMARK ]\n" \
1599 " [ dev STRING ] [ pref NUMBER ]\n" \
1600 " ACTION := [ table TABLE_ID ] [ nat ADDRESS ]\n" \
1601 " [ prohibit | reject | unreachable ]\n" \
1602 " [ realms [SRCREALM/]DSTREALM ]\n" \
1603 " TABLE_ID := [ local | main | default | NUMBER ]"
1605 #define iptunnel_trivial_usage \
1606 "{ add | change | del | show } [ NAME ]\n" \
1607 " [ mode { ipip | gre | sit } ]\n" \
1608 " [ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
1609 #define iptunnel_full_usage \
1610 "iptunnel { add | change | del | show } [ NAME ]\n" \
1611 " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
1612 " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
1613 " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]"
1615 #define kill_trivial_usage \
1616 "[-l] [-signal] process-id [process-id ...]"
1617 #define kill_full_usage \
1618 "Send a signal (default is TERM) to the specified process(es)" \
1620 " -l List all signal names and numbers"
1621 #define kill_example_usage \
1622 "$ ps | grep apache\n" \
1623 "252 root root S [apache]\n" \
1624 "263 www-data www-data S [apache]\n" \
1625 "264 www-data www-data S [apache]\n" \
1626 "265 www-data www-data S [apache]\n" \
1627 "266 www-data www-data S [apache]\n" \
1628 "267 www-data www-data S [apache]\n" \
1631 #define killall_trivial_usage \
1632 "[-l] [-q] [-signal] process-name [process-name ...]"
1633 #define killall_full_usage \
1634 "Send a signal (default is TERM) to the specified process(es)" \
1636 " -l List all signal names and numbers\n" \
1637 " -q Do not complain if no processes were killed"
1638 #define killall_example_usage \
1639 "$ killall apache\n"
1641 #define killall5_trivial_usage \
1643 #define killall5_full_usage \
1644 "Send a signal (default is TERM) to all processes outside current session" \
1646 " -l List all signal names and numbers\n" \
1648 #define klogd_trivial_usage \
1650 #define klogd_full_usage \
1653 " -c n Sets the default log level of console messages to n\n" \
1654 " -n Run as foreground process"
1656 #define length_trivial_usage \
1658 #define length_full_usage \
1659 "Print out the length of the specified STRING"
1660 #define length_example_usage \
1661 "$ length Hello\n" \
1664 #define less_trivial_usage \
1665 "[-EMNmh~?] FILE1 FILE2..."
1666 #define less_full_usage \
1667 "View a file or list of files. The position within files can be\n" \
1668 "changed, and files can be manipulated in various ways." \
1670 " -E Quit once the end of a file is reached\n" \
1671 " -M Display a status line containing the current line numbers\n" \
1672 " and the percentage through the file\n" \
1673 " -N Prefix line numbers to each line\n" \
1674 " -m Display a status line containing the percentage through the\n" \
1676 " -~ Suppress ~s displayed when input past the end of the file is\n" \
1679 #define setarch_trivial_usage \
1680 "<personality> <program> [args ...]"
1681 #define setarch_full_usage \
1682 "Personality may be:\n" \
1683 " linux32 Set 32bit uname emulation\n" \
1684 " linux64 Set 64bit uname emulation"
1686 #define ln_trivial_usage \
1687 "[OPTION] TARGET... LINK_NAME|DIRECTORY"
1688 #define ln_full_usage \
1689 "Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \
1690 "You may use '--' to indicate that all following arguments are non-options." \
1692 " -s Make symbolic links instead of hard links\n" \
1693 " -f Remove existing destination files\n" \
1694 " -n No dereference symlinks - treat like normal file\n" \
1695 " -b Make a backup of the target (if exists) before link operation\n" \
1696 " -S suf Use suffix instead of ~ when making backup files"
1697 #define ln_example_usage \
1698 "$ ln -s BusyBox /tmp/ls\n" \
1699 "$ ls -l /tmp/ls\n" \
1700 "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
1702 #define loadfont_trivial_usage \
1704 #define loadfont_full_usage \
1705 "Load a console font from standard input"
1706 #define loadfont_example_usage \
1707 "$ loadfont < /etc/i18n/fontname\n"
1709 #define loadkmap_trivial_usage \
1711 #define loadkmap_full_usage \
1712 "Load a binary keyboard translation table from standard input"
1713 #define loadkmap_example_usage \
1714 "$ loadkmap < /etc/i18n/lang-keymap\n"
1716 #define logger_trivial_usage \
1717 "[OPTION]... [MESSAGE]"
1718 #define logger_full_usage \
1719 "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin." \
1721 " -s Log to stderr as well as the system log\n" \
1722 " -t TAG Log using the specified tag (defaults to user name)\n" \
1723 " -p PRIO Enter the message with the specified priority.\n" \
1724 " This may be numerical or a 'facility.level' pair."
1725 #define logger_example_usage \
1726 "$ logger \"hello\"\n"
1728 #define login_trivial_usage \
1729 "[OPTION]... [username] [ENV=VAR ...]"
1730 #define login_full_usage \
1731 "Begin a new session on the system" \
1733 " -f Do not authenticate (user already authenticated)\n" \
1734 " -h Name of the remote host for this login\n" \
1735 " -p Preserve environment"
1737 #define logname_trivial_usage \
1739 #define logname_full_usage \
1740 "Print the name of the current user"
1741 #define logname_example_usage \
1745 #define logread_trivial_usage \
1747 #define logread_full_usage \
1748 "Show the messages from syslogd (using circular buffer)" \
1750 " -f Output data as the log grows"
1752 #define losetup_trivial_usage \
1753 "[-o OFFSET] [-d] LOOPDEVICE [FILE]]"
1754 #define losetup_full_usage \
1755 "(Dis)associate LOOPDEVICE with FILE, or display current associations" \
1757 " -d Disassociate LOOPDEVICE\n" \
1758 " -o OFFSET Start OFFSET bytes into FILE"
1759 #define losetup_notes_usage \
1760 "No arguments will display all current associations.\n" \
1761 "One argument (losetup /dev/loop1) will display the current association\n" \
1762 "(if any), or disassociate it (with -d). The display shows the offset\n" \
1763 "and filename of the file the loop device is currently bound to.\n\n" \
1764 "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
1765 "with an optional offset (-o 12345). Encryption is not yet supported.\n\n"
1767 #define ls_trivial_usage \
1768 "[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \
1769 USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \
1770 USE_FEATURE_LS_FILETYPES("p") USE_FEATURE_LS_FOLLOWLINKS("L") \
1771 USE_FEATURE_LS_RECURSIVE("R") USE_FEATURE_LS_SORTFILES("rS") "s" \
1772 USE_FEATURE_AUTOWIDTH("T") USE_FEATURE_LS_TIMESTAMPS("tu") \
1773 USE_FEATURE_LS_SORTFILES("v") USE_FEATURE_AUTOWIDTH("w") "x" \
1774 USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \
1775 USE_SELINUX("K") "] [filenames...]"
1776 #define ls_full_usage \
1777 "List directory contents" \
1779 "\n -1 List files in a single column" \
1780 "\n -A Do not list implied . and .." \
1781 "\n -a Do not hide entries starting with ." \
1782 "\n -C List entries by columns" \
1783 USE_FEATURE_LS_TIMESTAMPS( \
1784 "\n -c With -l: show ctime") \
1785 USE_FEATURE_LS_COLOR( \
1786 "\n --color[={always,never,auto}] Control coloring") \
1787 "\n -d List directory entries instead of contents" \
1788 USE_FEATURE_LS_TIMESTAMPS( \
1789 "\n -e List both full date and full time") \
1790 USE_FEATURE_LS_FILETYPES( \
1791 "\n -F Append indicator (one of */=@|) to entries") \
1792 "\n -i List the i-node for each file" \
1793 "\n -l Use a long listing format" \
1794 "\n -n List numeric UIDs and GIDs instead of names" \
1795 USE_FEATURE_LS_FILETYPES( \
1796 "\n -p Append indicator (one of /=@|) to entries") \
1797 USE_FEATURE_LS_FOLLOWLINKS( \
1798 "\n -L List entries pointed to by symbolic links") \
1799 USE_FEATURE_LS_RECURSIVE( \
1800 "\n -R List subdirectories recursively") \
1801 USE_FEATURE_LS_SORTFILES( \
1802 "\n -r Sort the listing in reverse order") \
1803 USE_FEATURE_LS_SORTFILES( \
1804 "\n -S Sort the listing by file size") \
1805 "\n -s List the size of each file, in blocks" \
1806 USE_FEATURE_AUTOWIDTH( \
1807 "\n -T NUM Assume Tabstop every NUM columns") \
1808 USE_FEATURE_LS_TIMESTAMPS( \
1809 "\n -t With -l: show modification time") \
1810 USE_FEATURE_LS_TIMESTAMPS( \
1811 "\n -u With -l: show access time") \
1812 USE_FEATURE_LS_SORTFILES( \
1813 "\n -v Sort the listing by version") \
1814 USE_FEATURE_AUTOWIDTH( \
1815 "\n -w NUM Assume the terminal is NUM columns wide") \
1816 "\n -x List entries by lines instead of by columns" \
1817 USE_FEATURE_LS_SORTFILES( \
1818 "\n -X Sort the listing by extension") \
1819 USE_FEATURE_HUMAN_READABLE( \
1820 "\n -h Print sizes in human readable format (e.g., 1K 243M 2G)") \
1822 "\n -k Print security context") \
1824 "\n -K Print security context in long format")
1826 #define lsattr_trivial_usage \
1827 "[-Radlv] [files...]"
1828 #define lsattr_full_usage \
1829 "List file attributes on an ext2 fs" \
1831 " -R Recursively list subdirectories\n" \
1832 " -a Do not hide entries starting with .\n" \
1833 " -d List directory entries instead of contents\n" \
1834 " -l Print long flag names\n" \
1835 " -v List the file's version/generation number"
1837 #define lsmod_trivial_usage \
1839 #define lsmod_full_usage \
1840 "List the currently loaded kernel modules"
1842 #ifdef CONFIG_FEATURE_MAKEDEVS_LEAF
1843 #define makedevs_trivial_usage \
1844 "NAME TYPE MAJOR MINOR FIRST LAST [s]"
1845 #define makedevs_full_usage \
1846 "Create a range of block or character special files\n\n" \
1847 "TYPEs include:\n" \
1848 " b: Make a block (buffered) device\n" \
1849 " c or u: Make a character (un-buffered) device\n" \
1850 " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes\n" \
1852 "FIRST specifies the number appended to NAME to create the first device.\n" \
1853 "LAST specifies the number of the last item that should be created\n" \
1854 "If 's' is the last argument, the base device is created as well.\n\n" \
1856 " makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \
1857 " makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
1858 #define makedevs_example_usage \
1859 "# makedevs /dev/ttyS c 4 66 2 63\n" \
1860 "[creates ttyS2-ttyS63]\n" \
1861 "# makedevs /dev/hda b 3 0 0 8 s\n" \
1862 "[creates hda,hda1-hda8]\n"
1865 #ifdef CONFIG_FEATURE_MAKEDEVS_TABLE
1866 #define makedevs_trivial_usage \
1867 "[-d device_table] rootdir"
1868 #define makedevs_full_usage \
1869 "Create a range of special files as specified in a device table.\n" \
1870 "Device table entries take the form of:\n" \
1871 "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
1872 "Where name is the file name, type can be one of:\n" \
1873 " f A regular file\n" \
1875 " c Character special device file\n" \
1876 " b Block special device file\n" \
1877 " p Fifo (named pipe)\n" \
1878 "uid is the user id for the target file, gid is the group id for the\n" \
1879 "target file. The rest of the entries (major, minor, etc) apply to\n" \
1880 "to device special files. A '-' may be used for blank entries."
1881 #define makedevs_example_usage \
1883 "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
1884 "/dev d 755 0 0 - - - - -\n" \
1885 "/dev/console c 666 0 0 5 1 - - -\n" \
1886 "/dev/null c 666 0 0 1 3 0 0 -\n" \
1887 "/dev/zero c 666 0 0 1 5 0 0 -\n" \
1888 "/dev/hda b 640 0 0 3 0 0 0 -\n" \
1889 "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
1899 #define md5sum_trivial_usage \
1900 "[OPTION] [FILEs...]" \
1901 USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
1902 #define md5sum_full_usage \
1903 "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
1905 "With no FILE, or when FILE is -, read standard input." \
1906 USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \
1907 " -c Check MD5 sums against given list\n" \
1908 "\nThe following two options are useful only when verifying checksums:\n" \
1909 " -s Don't output anything, status code shows success\n" \
1910 " -w Warn about improperly formatted MD5 checksum lines")
1911 #define md5sum_example_usage \
1912 "$ md5sum < busybox\n" \
1913 "6fd11e98b98a58f64ff3398d7b324003\n" \
1914 "$ md5sum busybox\n" \
1915 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
1917 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
1921 #define mdev_trivial_usage \
1923 #define mdev_full_usage \
1924 " -s Scan /sys and populate /dev during system boot\n\n" \
1925 "Called with no options (via hotplug) it uses environment variables\n" \
1926 "to determine which device to add/remove."
1927 #define mdev_notes_usage "" \
1928 USE_FEATURE_MDEV_CONFIG( \
1929 "The mdev config file contains lines that look like:\n" \
1930 " hd[a-z][0-9]* 0:3 660\n\n" \
1931 "That's device name (with regex match), uid:gid, and permissions.\n\n" \
1932 USE_FEATURE_MDEV_EXEC( \
1933 "Optionally, that can be followed (on the same line) by a special character\n" \
1934 "and a command line to run after creating/before deleting the corresponding\n" \
1935 "device(s). The environment variable $MDEV indicates the active device node\n" \
1936 "(which is useful if it's a regex match). For example:\n\n" \
1937 " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
1938 "The special characters are @ (run after creating), $ (run before deleting),\n" \
1939 "and * (run both after creating and before deleting). The commands run in\n" \
1940 "the /dev directory, and use system() which calls /bin/sh.\n\n" \
1942 "Config file parsing stops on the first matching line. If no config\n"\
1943 "entry is matched, devices are created with default 0:0 660. (Make\n"\
1944 "the last line match .* to override this.)\n\n" \
1947 #define mesg_trivial_usage \
1949 #define mesg_full_usage \
1950 "Control write access to your terminal\n" \
1951 " y Allow write access to your terminal\n" \
1952 " n Disallow write access to your terminal"
1954 #define mkdir_trivial_usage \
1955 "[OPTION] DIRECTORY..."
1956 #define mkdir_full_usage \
1957 "Create the DIRECTORY(ies) if they do not already exist" \
1959 " -m Set permission mode (as in chmod), not rwxrwxrwx - umask\n" \
1960 " -p No error if existing, make parent directories as needed"
1961 #define mkdir_example_usage \
1962 "$ mkdir /tmp/foo\n" \
1963 "$ mkdir /tmp/foo\n" \
1964 "/tmp/foo: File exists\n" \
1965 "$ mkdir /tmp/foo/bar/baz\n" \
1966 "/tmp/foo/bar/baz: No such file or directory\n" \
1967 "$ mkdir -p /tmp/foo/bar/baz\n"
1969 #define mke2fs_trivial_usage \
1970 "[-c|-l filename] [-b block-size] [-f fragment-size] [-g blocks-per-group] " \
1971 "[-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] " \
1972 "[-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] " \
1973 "[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \
1974 "[-M last-mounted-directory] [-S] [-T filesystem-type] " \
1975 "device [blocks-count]"
1976 #define mke2fs_full_usage \
1977 " -b size Block size in bytes\n" \
1978 " -c Check for bad blocks before creating\n" \
1979 " -E opts Set extended options\n" \
1980 " -f size Fragment size in bytes\n" \
1981 " -F Force (ignore sanity checks)\n" \
1982 " -g num Number of blocks in a block group\n" \
1983 " -i ratio The bytes/inode ratio\n" \
1984 " -j Create a journal (ext3)\n" \
1985 " -J opts Set journal options (size/device)\n" \
1986 " -l file Read bad blocks list from file\n" \
1987 " -L lbl Set the volume label\n" \
1988 " -m percent Percent of fs blocks to reserve for admin\n" \
1989 " -M dir Set last mounted directory\n" \
1990 " -n Do not actually create anything\n" \
1991 " -N num Number of inodes to create\n" \
1992 " -o os Set the 'creator os' field\n" \
1993 " -O features Dir_index/filetype/has_journal/journal_dev/sparse_super\n" \
1994 " -q Quiet execution\n" \
1995 " -r rev Set filesystem revision\n" \
1996 " -S Write superblock and group descriptors only\n" \
1997 " -T fs-type Set usage type (news/largefile/largefile4)\n" \
1998 " -v Verbose execution"
2000 #define mkfifo_trivial_usage \
2002 #define mkfifo_full_usage \
2003 "Create a named pipe (identical to 'mknod name p')" \
2005 " -m Create the pipe using the specified mode (default a=rw)"
2007 #define mkfs_minix_trivial_usage \
2008 "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
2009 #define mkfs_minix_full_usage \
2010 "Make a MINIX filesystem" \
2012 " -c Check the device for bad blocks\n" \
2013 " -n [14|30] Specify the maximum length of filenames\n" \
2014 " -i INODES Specify the number of inodes for the filesystem\n" \
2015 " -l FILENAME Read the bad blocks list from FILENAME\n" \
2016 " -v Make a Minix version 2 filesystem"
2018 #define mknod_trivial_usage \
2019 "[OPTIONS] NAME TYPE MAJOR MINOR"
2020 #define mknod_full_usage \
2021 "Create a special file (block, character, or pipe)" \
2023 " -m Create the special file using the specified mode (default a=rw)" \
2024 "\n\nTYPEs include:\n" \
2025 " b: Make a block (buffered) device\n" \
2026 " c or u: Make a character (un-buffered) device\n" \
2027 " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes"
2028 #define mknod_example_usage \
2029 "$ mknod /dev/fd0 b 2 0\n" \
2030 "$ mknod -m 644 /tmp/pipe p\n"
2032 #define mkswap_trivial_usage \
2033 "[-c] [-v0|-v1] device [block-count]"
2034 #define mkswap_full_usage \
2035 "Prepare a disk partition to be used as swap partition" \
2037 " -c Check for read-ability\n" \
2038 " -v0 Make version 0 swap [max 128 Megs]\n" \
2039 " -v1 Make version 1 swap [big!] (default for kernels > 2.1.117)\n" \
2040 " block-count Number of block to use (default is entire partition)"
2042 #define mktemp_trivial_usage \
2044 #define mktemp_full_usage \
2045 "Create a temporary file with its name based on TEMPLATE.\n" \
2046 "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX)." \
2048 " -d Make a directory instead of a file\n" \
2049 " -q Fail silently if an error occurs"
2050 #define mktemp_example_usage \
2051 "$ mktemp /tmp/temp.XXXXXX\n" \
2052 "/tmp/temp.mWiLjM\n" \
2053 "$ ls -la /tmp/temp.mWiLjM\n" \
2054 "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
2056 #define modprobe_trivial_usage \
2057 "[-knqrsv] MODULE [symbol=value ...]"
2058 #define modprobe_full_usage \
2060 " -k Make module autoclean-able\n" \
2061 " -n Just show what would be done\n" \
2062 " -q Quiet output\n" \
2063 " -r Remove module (stacks) or do autoclean\n" \
2064 " -s Report via syslog instead of stderr\n" \
2065 " -v Verbose output"
2066 #define modprobe_notes_usage \
2067 "modprobe can (un)load a stack of modules, passing each module options (when\n" \
2068 "loading). modprobe uses a configuration file to determine what option(s) to\n" \
2069 "pass each module it loads.\n" \
2071 "The configuration file is searched (in order) amongst:\n" \
2073 " /etc/modprobe.conf (2.6 only)\n" \
2074 " /etc/modules.conf\n" \
2075 " /etc/conf.modules (deprecated)\n" \
2077 "They all have the same syntax (see below). If none is present, it is\n" \
2078 "_not_ an error; each loaded module is then expected to load without\n" \
2079 "options. Once a file is found, the others are tested for.\n" \
2081 "/etc/modules.conf entry format:\n" \
2083 " alias <alias_name> <mod_name>\n" \
2084 " Makes it possible to modprobe alias_name, when there is no such module.\n" \
2085 " It makes sense if your mod_name is long, or you want a more representative\n" \
2086 " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \
2087 " This makes it also possible to use a different set of options (below) for\n" \
2088 " the module and the alias.\n" \
2089 " A module can be aliased more than once.\n" \
2091 " options <mod_name|alias_name> <symbol=value ...>\n" \
2092 " When loading module mod_name (or the module aliased by alias_name), pass\n" \
2093 " the \"symbol=value\" pairs as option to that module.\n" \
2095 "Sample /etc/modules.conf file:\n" \
2097 " options tulip irq=3\n" \
2098 " alias tulip tulip2\n" \
2099 " options tulip2 irq=4 io=0x308\n" \
2101 "Other functionality offered by 'classic' modprobe is not available in\n" \
2102 "this implementation.\n" \
2104 "If module options are present both in the config file, and on the command line,\n" \
2105 "then the options from the command line will be passed to the module _after_\n" \
2106 "the options from the config file. That way, you can have defaults in the config\n" \
2107 "file, and override them for a specific usage from the command line.\n"
2108 #define modprobe_example_usage \
2109 "(with the above /etc/modules.conf):\n\n" \
2110 "$ modprobe tulip\n" \
2111 " will load the module 'tulip' with default option 'irq=3'\n\n" \
2112 "$ modprobe tulip irq=5\n" \
2113 " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \
2114 "$ modprobe tulip2\n" \
2115 " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \
2116 " which are the default for alias 'tulip2'\n\n" \
2117 "$ modprobe tulip2 irq=8\n" \
2118 " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \
2119 " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \
2120 " from the command line\n\n" \
2121 "$ modprobe tulip2 irq=2 io=0x210\n" \
2122 " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \
2123 " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \
2124 " from the command line\n"
2126 #define more_trivial_usage \
2128 #define more_full_usage \
2129 "View FILE or standard input one screenful at a time"
2130 #define more_example_usage \
2133 #define mount_trivial_usage \
2134 "[flags] DEVICE NODE [-o options,more-options]"
2135 #define mount_full_usage \
2136 "Mount a filesystem. Filesystem autodetection requires /proc be mounted." \
2138 " -a Mount all filesystems in fstab\n" \
2139 USE_FEATURE_MTAB_SUPPORT( \
2140 " -f \"Fake\" Add entry to mount table but don't mount it\n" \
2141 " -n Don't write a mount table entry\n" \
2143 " -o option One of many filesystem options, listed below\n" \
2144 " -r Mount the filesystem read-only\n" \
2145 " -t fs-type Specify the filesystem type\n" \
2146 " -w Mount for reading and writing (default)\n" \
2148 "Options for use with the \"-o\" flag:\n" \
2149 USE_FEATURE_MOUNT_LOOP( \
2150 " loop Ignored (loop devices are autodetected)\n" \
2152 USE_FEATURE_MOUNT_FLAGS( \
2153 " [a]sync Writes are asynchronous / synchronous\n" \
2154 " [no]atime Disable / enable updates to inode access times\n" \
2155 " [no]diratime Disable / enable atime updates to directories\n" \
2156 " [no]dev Allow use of special device files / disallow them\n" \
2157 " [no]exec Allow use of executable files / disallow them\n" \
2158 " [no]suid Allow set-user-id-root programs / disallow them\n" \
2159 " [r]shared Convert [recursively] to a shared subtree\n" \
2160 " [r]slave Convert [recursively] to a slave subtree\n" \
2161 " [r]private Convert [recursively] to a private subtree\n" \
2162 " [un]bindable Make mount point [un]able to be bind mounted\n" \
2163 " bind Bind a directory to an additional location\n" \
2164 " move Relocate an existing mount point\n" \
2166 " remount Remount a mounted filesystem, changing its flags\n" \
2167 " ro/rw Mount for read-only / read-write\n" \
2169 "There are EVEN MORE flags that are specific to each filesystem\n" \
2170 "You'll have to see the written documentation for those filesystems"
2171 #define mount_example_usage \
2173 "/dev/hda3 on / type minix (rw)\n" \
2174 "proc on /proc type proc (rw)\n" \
2175 "devpts on /dev/pts type devpts (rw)\n" \
2176 "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
2177 "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
2178 "$ mount cd_image.iso mydir\n"
2179 #define mount_notes_usage \
2180 "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
2182 #define mountpoint_trivial_usage \
2183 "[-q] <[-d] DIR | -x DEVICE>"
2184 #define mountpoint_full_usage \
2185 "mountpoint checks if the directory is a mountpoint" \
2187 " -q Be more quiet\n" \
2188 " -d Print major/minor device number of the filesystem\n" \
2189 " -x Print major/minor device number of the blockdevice"
2190 #define mountpoint_example_usage \
2191 "$ mountpoint /proc\n" \
2192 "/proc is not a mountpoint\n" \
2193 "$ mountpoint /sys\n" \
2194 "/sys is a mountpoint\n"
2196 #define mt_trivial_usage \
2197 "[-f device] opcode value"
2198 #define mt_full_usage \
2199 "Control magnetic tape drive operation\n" \
2200 "\nAvailable Opcodes:\n\n" \
2201 "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
2202 "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
2203 "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
2204 "setpart tell unload unlock weof wset"
2206 #define mv_trivial_usage \
2207 "[OPTION]... SOURCE DEST\n" \
2208 "or: mv [OPTION]... SOURCE... DIRECTORY"
2209 #define mv_full_usage \
2210 "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY" \
2212 " -f Don't prompt before overwriting\n" \
2213 " -i Interactive, prompt before overwrite"
2214 #define mv_example_usage \
2215 "$ mv /tmp/foo /bin/bar\n"
2217 #define nameif_trivial_usage \
2218 "[-s] [-c FILE] [{IFNAME MACADDR}]"
2219 #define nameif_full_usage \
2220 "Rename network interface while it in the down state" \
2222 " -c FILE Use configuration file (default is /etc/mactab)\n" \
2223 " -s Use syslog (LOCAL0 facility)\n" \
2224 " IFNAME MACADDR new_interface_name interface_mac_address"
2225 #define nameif_example_usage \
2226 "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
2228 "$ nameif -c /etc/my_mactab_file\n" \
2230 #if ENABLE_NC_SERVER || ENABLE_NC_EXTRA
2231 #define NC_OPTIONS_STR "\n\nOptions:"
2233 #define NC_OPTIONS_STR
2236 #define nc_trivial_usage \
2237 USE_NC_EXTRA("[-iN] [-wN] ")USE_NC_SERVER("[-l] [-p PORT] ") \
2238 "["USE_NC_EXTRA("-f FILENAME|")"IPADDR PORTNUM]"USE_NC_EXTRA(" [-e COMMAND]")
2239 #define nc_full_usage \
2240 "Open a pipe to IP:port" USE_NC_EXTRA(" or file") \
2243 "\n -e Exec rest of command line after connect" \
2244 "\n -i SECS Delay interval for lines sent" \
2245 "\n -w SECS Timeout for connect" \
2246 "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \
2249 "\n -l Listen mode, for inbound connects" \
2251 "\n (use -l twice with -e for persistent server)") \
2252 "\n -p PORT Local port number" \
2255 #define nc_notes_usage "" \
2257 "To use netcat as a terminal emulator on a serial port:\n\n" \
2258 "$ stty 115200 -F /dev/ttyS0\n" \
2259 "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
2262 #define nc_example_usage \
2263 "$ nc foobar.somedomain.com 25\n" \
2264 "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
2266 "214-Commands supported:\n" \
2267 "214- HELO EHLO MAIL RCPT DATA AUTH\n" \
2268 "214 NOOP QUIT RSET HELP\n" \
2270 "221 foobar closing connection\n"
2272 #define netstat_trivial_usage \
2274 #define netstat_full_usage \
2275 "Display networking information" \
2277 " -l Display listening server sockets\n" \
2278 " -a Display all sockets (default: connected)\n" \
2279 " -e Display other/more information\n" \
2280 " -n Don't resolve names\n" \
2281 " -r Display routing table\n" \
2282 " -t Tcp sockets\n" \
2283 " -u Udp sockets\n" \
2284 " -w Raw sockets\n" \
2287 #define nice_trivial_usage \
2288 "[-n ADJUST] [COMMAND [ARG] ...]"
2289 #define nice_full_usage \
2290 "Run a program with modified scheduling priority" \
2292 " -n ADJUST Adjust the scheduling priority by ADJUST"
2294 #define nmeter_trivial_usage \
2296 #define nmeter_full_usage \
2297 "Monitor system in real time\n\n" \
2298 "Format specifiers:\n" \
2299 "%Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \
2300 " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \
2301 "%[niface] Monitor network interface 'iface'\n" \
2302 "%m Monitor allocated memory\n" \
2303 "%[mf] Monitor free memory\n" \
2304 "%[mt] Monitor total memory\n" \
2305 "%s Monitor allocated swap\n" \
2306 "%f Monitor number of used file descriptors\n" \
2307 "%Ni Monitor total/specific IRQ rate\n" \
2308 "%x Monitor context switch rate\n" \
2309 "%p Monitor forks\n" \
2310 "%[pn] Monitor # of processes\n" \
2311 "%b Monitor block io\n" \
2312 "%Nt Show time (with N decimal points)\n" \
2313 "%Nd Milliseconds between updates (default=1000)\n" \
2314 "%r Print <cr> instead of <lf> at EOL"
2315 #define nmeter_example_usage \
2316 "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
2318 #define nohup_trivial_usage \
2320 #define nohup_full_usage \
2321 "Run a command immune to hangups, with output to a non-tty"
2322 #define nohup_example_usage \
2325 #define nslookup_trivial_usage \
2327 #define nslookup_full_usage \
2328 "Query the nameserver for the IP address of the given HOST\n" \
2329 "optionally using a specified DNS server"
2330 #define nslookup_example_usage \
2331 "$ nslookup localhost\n" \
2332 "Server: default\n" \
2333 "Address: default\n" \
2336 "Address: 127.0.0.1\n"
2338 #define od_trivial_usage \
2339 "[-aBbcDdeFfHhIiLlOovXx] [FILE]"
2340 #define od_full_usage \
2341 "Write an unambiguous representation, octal bytes by default, of FILE\n" \
2342 "to standard output. With no FILE, or when FILE is -, read standard input."
2344 #define openvt_trivial_usage \
2345 "<vtnum> <COMMAND> [ARGS...]"
2346 #define openvt_full_usage \
2347 "Start a command on a new virtual terminal"
2348 #define openvt_example_usage \
2349 "openvt 2 /bin/ash\n"
2351 #define passwd_trivial_usage \
2353 #define passwd_full_usage \
2354 "Change a user password. If no name is specified,\n" \
2355 "changes the password for the current user." \
2357 " -a Define which algorithm shall be used for the password\n" \
2358 " (choices: des, md5)\n" /* ", sha1)" */ \
2359 " -d Delete the password for the specified user account\n" \
2360 " -l Locks (disables) the specified user account\n" \
2361 " -u Unlocks (re-enables) the specified user account"
2363 #define patch_trivial_usage \
2364 "[-p<num>] [-i <diff>]"
2365 #define patch_full_usage \
2366 " -p NUM Strip NUM leading components from file names\n" \
2367 " -i DIFF Read DIFF instead of stdin"
2368 #define patch_example_usage \
2369 "$ patch -p1 < example.diff\n" \
2370 "$ patch -p0 -i example.diff"
2372 #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
2373 #define USAGE_PIDOF "Options:"
2375 #define USAGE_PIDOF "\nThis version of pidof accepts no options."
2378 #define pidof_trivial_usage \
2379 "process-name [OPTION] [process-name ...]"
2381 #define pidof_full_usage \
2382 "List the PIDs of all processes with names that match the\n" \
2383 "names on the command line\n" \
2385 USE_FEATURE_PIDOF_SINGLE( \
2386 "\n -s Display only a single PID") \
2387 USE_FEATURE_PIDOF_OMIT( \
2388 "\n -o Omit given pid") \
2389 USE_FEATURE_PIDOF_OMIT( \
2390 "\n Use %PPID to omit the parent pid of pidof itself")
2391 #define pidof_example_usage \
2394 USE_FEATURE_PIDOF_OMIT( \
2395 "$ pidof /bin/sh\n20351 5973 5950\n") \
2396 USE_FEATURE_PIDOF_OMIT( \
2397 "$ pidof /bin/sh -o %PPID\n20351 5950")
2399 #ifndef CONFIG_FEATURE_FANCY_PING
2400 #define ping_trivial_usage \
2402 #define ping_full_usage \
2403 "Send ICMP ECHO_REQUEST packets to network hosts"
2405 #define ping_trivial_usage \
2407 #define ping_full_usage \
2408 "Send ICMP ECHO_REQUEST packets to network hosts" \
2410 " -c CNT Send only CNT pings\n" \
2411 " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
2412 " -I IP Use IP as source address\n" \
2413 " -q Quiet mode, only displays output at start\n" \
2414 " and when finished"
2416 #define ping_example_usage \
2417 "$ ping localhost\n" \
2418 "PING slag (127.0.0.1): 56 data bytes\n" \
2419 "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
2421 "--- debian ping statistics ---\n" \
2422 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
2423 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
2425 #ifndef CONFIG_FEATURE_FANCY_PING6
2426 #define ping6_trivial_usage \
2428 #define ping6_full_usage \
2429 "Send ICMP ECHO_REQUEST packets to network hosts"
2431 #define ping6_trivial_usage \
2433 #define ping6_full_usage \
2434 "Send ICMP ECHO_REQUEST packets to network hosts" \
2436 " -c CNT Send only CNT pings\n" \
2437 " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
2438 " -q Quiet mode, only displays output at start\n" \
2439 " and when finished"
2441 #define ping6_example_usage \
2442 "$ ping6 ip6-localhost\n" \
2443 "PING ip6-localhost (::1): 56 data bytes\n" \
2444 "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
2446 "--- ip6-localhost ping statistics ---\n" \
2447 "1 packets transmitted, 1 packets received, 0% packet loss\n" \
2448 "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
2450 #define pivot_root_trivial_usage \
2452 #define pivot_root_full_usage \
2453 "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
2454 "the new root file system"
2456 #define poweroff_trivial_usage \
2457 "[-d<delay>] [-n<nosync>] [-f<force>]"
2458 #define poweroff_full_usage \
2459 "Halt and shut off power" \
2461 " -d Delay interval for halting\n" \
2462 " -n No call to sync()\n" \
2463 " -f Force power off (don't go through init)"
2465 #define printenv_trivial_usage \
2467 #define printenv_full_usage \
2468 "Print all or part of environment.\n" \
2469 "If no environment VARIABLE specified, print them all."
2471 #define printf_trivial_usage \
2472 "FORMAT [ARGUMENT...]"
2473 #define printf_full_usage \
2474 "Format and print ARGUMENT(s) according to FORMAT,\n" \
2475 "where FORMAT controls the output exactly as in C printf"
2476 #define printf_example_usage \
2477 "$ printf \"Val=%d\\n\" 5\n" \
2483 #define ps_trivial_usage \
2485 #define ps_full_usage \
2486 "Report process status" \
2488 "\n -o col1,col2=header Select columns for display" \
2490 #else /* !ENABLE_DESKTOP */
2492 #if !defined CONFIG_SELINUX && !ENABLE_FEATURE_PS_WIDE
2493 #define USAGE_PS "\nThis version of ps accepts no options"
2495 #define USAGE_PS "\nOptions:"
2498 #define ps_trivial_usage \
2500 #define ps_full_usage \
2501 "Report process status\n" \
2504 "\n -c Show SE Linux context") \
2505 USE_FEATURE_PS_WIDE( \
2508 #endif /* ENABLE_DESKTOP */
2510 #define ps_example_usage \
2512 " PID Uid Gid State Command\n" \
2513 " 1 root root S init\n" \
2514 " 2 root root S [kflushd]\n" \
2515 " 3 root root S [kupdate]\n" \
2516 " 4 root root S [kpiod]\n" \
2517 " 5 root root S [kswapd]\n" \
2518 " 742 andersen andersen S [bash]\n" \
2519 " 743 andersen andersen S -bash\n" \
2520 " 745 root root S [getty]\n" \
2521 " 2990 andersen andersen R ps\n"
2524 #define pwd_trivial_usage \
2526 #define pwd_full_usage \
2527 "Print the full filename of the current working directory"
2528 #define pwd_example_usage \
2532 #define raidautorun_trivial_usage \
2534 #define raidautorun_full_usage \
2535 "Tell the kernel to automatically search and start RAID arrays"
2536 #define raidautorun_example_usage \
2537 "$ raidautorun /dev/md0"
2539 #define rdate_trivial_usage \
2541 #define rdate_full_usage \
2542 "Get and possibly set the system date and time from a remote HOST" \
2544 " -s Set the system date and time (default)\n" \
2545 " -p Print the date and time"
2547 #define readahead_trivial_usage \
2549 #define readahead_full_usage \
2550 "Preload FILE(s) in RAM cache so that subsequent reads for those" \
2551 "files do not block on disk I/O"
2553 #define readlink_trivial_usage \
2554 USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE"
2555 #define readlink_full_usage \
2556 "Display the value of a symbolic link" \
2557 USE_FEATURE_READLINK_FOLLOW( \
2559 " -f Canonicalize by following all symlinks")
2561 #define readprofile_trivial_usage \
2563 #define readprofile_full_usage \
2565 " -m <mapfile> (Default: /boot/System.map)\n" \
2566 " -p <profile> (Default: /proc/profile)\n" \
2567 " -M <mult> Set the profiling multiplier to <mult>\n" \
2568 " -i Print only info about the sampling step\n" \
2569 " -v Print verbose data\n" \
2570 " -a Print all symbols, even if count is 0\n" \
2571 " -b Print individual histogram-bin counts\n" \
2572 " -s Print individual counters within functions\n" \
2573 " -r Reset all the counters (root only)\n" \
2574 " -n Disable byte order auto-detection"
2576 #define realpath_trivial_usage \
2578 #define realpath_full_usage \
2579 "Return the absolute pathnames of given argument"
2581 #define reboot_trivial_usage \
2582 "[-d<delay>] [-n<nosync>] [-f<force>]"
2583 #define reboot_full_usage \
2584 "Reboot the system" \
2586 " -d Delay interval for rebooting\n" \
2587 " -n No call to sync()\n" \
2588 " -f Force reboot (don't go through init)"
2590 #define renice_trivial_usage \
2591 "{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]"
2592 #define renice_full_usage \
2593 "Change priority of running processes" \
2595 " -n Adjusts current nice value (smaller is faster)\n" \
2596 " -p Process id(s) (default)\n" \
2597 " -g Process group id(s)\n" \
2598 " -u Process user name(s) and/or id(s)"
2600 #define reset_trivial_usage \
2602 #define reset_full_usage \
2605 #define resize_trivial_usage \
2607 #define resize_full_usage \
2610 #define rm_trivial_usage \
2611 "[OPTION]... FILE..."
2612 #define rm_full_usage \
2613 "Remove (unlink) the FILE(s). You may use '--' to\n" \
2614 "indicate that all following arguments are non-options." \
2616 " -i Always prompt before removing each destination\n" \
2617 " -f Remove existing destinations, never prompt\n" \
2618 " -r,-R Remove the contents of directories recursively"
2619 #define rm_example_usage \
2620 "$ rm -rf /tmp/foo\n"
2622 #define rmdir_trivial_usage \
2623 "[OPTION]... DIRECTORY..."
2624 #define rmdir_full_usage \
2625 "Remove the DIRECTORY, if it is empty"
2626 #define rmdir_example_usage \
2627 "# rmdir /tmp/foo\n"
2629 #define rmmod_trivial_usage \
2630 "[OPTION]... [MODULE]..."
2631 #define rmmod_full_usage \
2632 "Unload the specified kernel modules from the kernel" \
2634 " -a Remove all unused modules (recursively)"
2635 #define rmmod_example_usage \
2638 #define route_trivial_usage \
2639 "[{add|del|delete}]"
2640 #define route_full_usage \
2641 "Edit the kernel's routing tables" \
2643 " -n Dont resolve names\n" \
2644 " -e Display other/more information\n" \
2645 " -A inet" USE_FEATURE_IPV6("{6}") " Select address family"
2647 #define rpm_trivial_usage \
2648 "-i -q[ildc]p package.rpm"
2649 #define rpm_full_usage \
2650 "Manipulate RPM packages" \
2652 "\n -i Install package" \
2653 "\n -q Query package" \
2654 "\n -p Query uninstalled package" \
2655 "\n -i Show information" \
2656 "\n -l List contents" \
2657 "\n -d List documents" \
2658 "\n -c List config files"
2660 #define rpm2cpio_trivial_usage \
2662 #define rpm2cpio_full_usage \
2663 "Output a cpio archive of the rpm file"
2665 #define run_parts_trivial_usage \
2666 "[-t] [-a ARG] [-u MASK] DIRECTORY"
2667 #define run_parts_full_usage \
2668 "Run a bunch of scripts in a directory" \
2670 " -t Prints what would be run, but does not actually run anything\n" \
2671 " -a ARG Pass ARG as an argument for every program invoked\n" \
2672 " -u MASK Set the umask to MASK before executing every program"
2674 #define runlevel_trivial_usage \
2676 #define runlevel_full_usage \
2677 "Find the current and previous system runlevel.\n\n" \
2678 "If no utmp file exists or if no runlevel record can be found,\n" \
2680 #define runlevel_example_usage \
2681 "$ runlevel /var/run/utmp\n" \
2684 #define runsv_trivial_usage \
2686 #define runsv_full_usage \
2687 "Start and monitor a service and optionally an appendant log service"
2689 #define runsvdir_trivial_usage \
2691 #define runsvdir_full_usage \
2692 "Start a runsv process for each subdirectory"
2694 #define rx_trivial_usage \
2696 #define rx_full_usage \
2697 "Receive a file using the xmodem protocol"
2698 #define rx_example_usage \
2701 #define sed_trivial_usage \
2702 "[-efinr] pattern [files...]"
2703 #define sed_full_usage \
2705 " -e script Add the script to the commands to be executed\n" \
2706 " -f scriptfile Add script-file contents to the\n" \
2707 " commands to be executed\n" \
2708 " -i Edit files in-place\n" \
2709 " -n Suppress automatic printing of pattern space\n" \
2710 " -r Use extended regular expression syntax\n" \
2712 "If no -e or -f is given, the first non-option argument is taken as the sed\n" \
2713 "script to interpret. All remaining arguments are names of input files; if no\n" \
2714 "input files are specified, then the standard input is read. Source files\n" \
2715 "will not be modified unless -i option is given."
2717 #define sed_example_usage \
2718 "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
2721 #define seq_trivial_usage \
2722 "[first [increment]] last"
2723 #define seq_full_usage \
2724 "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \
2725 "FIRST, INCREMENT default to 1" \
2726 "\n\nArguments:\n" \
2729 " FIRST INCREMENT LAST"
2731 #define setconsole_trivial_usage \
2732 "[-r|--reset] [DEVICE]"
2733 #define setconsole_full_usage \
2734 "Redirect system console output to DEVICE (default: /dev/tty)" \
2736 " -r Reset output to /dev/console"
2738 #define setkeycodes_trivial_usage \
2739 "SCANCODE KEYCODE ..."
2740 #define setkeycodes_full_usage \
2741 "Set entries into the kernel's scancode-to-keycode map,\n" \
2742 "allowing unusual keyboards to generate usable keycodes.\n\n" \
2743 "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
2744 "and KEYCODE is given in decimal"
2745 #define setkeycodes_example_usage \
2746 "$ setkeycodes e030 127\n"
2748 #define setlogcons_trivial_usage \
2750 #define setlogcons_full_usage \
2751 "Redirect the kernel output to console N (0 for current)"
2753 #define setsid_trivial_usage \
2755 #define setsid_full_usage \
2756 "Run any program in a new session by calling setsid() before\n" \
2757 "exec'ing the rest of its arguments. See setsid(2) for details."
2759 #define lash_trivial_usage \
2761 "or: sh -c command [args]..."
2762 #define lash_full_usage \
2763 "The BusyBox LAme SHell (command interpreter)"
2764 #define lash_notes_usage \
2765 "This command does not yet have proper documentation.\n\n" \
2766 "Use lash just as you would use any other shell. It properly handles pipes,\n" \
2767 "redirects, job control, can be used as the shell for scripts, and has a\n" \
2768 "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
2769 "Bourne Shell syntax. If you need things like \"if-then-else\", \"while\", and such\n" \
2770 "use ash or bash. If you just need a very simple and extremely small shell,\n" \
2771 "this will do the job."
2773 #define last_trivial_usage \
2775 #define last_full_usage \
2776 "Show listing of the last users that logged into the system"
2778 #define sha1sum_trivial_usage \
2779 "[OPTION] [FILEs...]" \
2780 USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
2781 #define sha1sum_full_usage \
2782 "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n" \
2783 "With no FILE, or when FILE is -, read standard input." \
2785 USE_FEATURE_MD5_SHA1_SUM_CHECK( \
2786 " -c Check SHA1 sums against given list\n" \
2787 "\nThe following two options are useful only when verifying checksums:\n" \
2788 " -s Don't output anything, status code shows success\n" \
2789 " -w Warn about improperly formatted SHA1 checksum lines")
2791 #define sleep_trivial_usage \
2792 USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...")
2793 #define sleep_full_usage \
2794 SKIP_FEATURE_FANCY_SLEEP("Pause for N seconds") \
2795 USE_FEATURE_FANCY_SLEEP( \
2796 "Pause for a time equal to the total of the args given, where each arg can\n" \
2797 "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays")
2798 #define sleep_example_usage \
2800 "[2 second delay results]\n" \
2801 USE_FEATURE_FANCY_SLEEP( \
2802 "$ sleep 1d 3h 22m 8s\n" \
2803 "[98528 second delay results]\n")
2805 #define sort_trivial_usage \
2807 USE_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o outfile] [-k start[.offset][opts][,end[.offset][opts]] [-t char") \
2809 #define sort_full_usage \
2810 "Sort lines of text in the specified files" \
2812 USE_FEATURE_SORT_BIG( \
2813 " -b Ignore leading blanks\n" \
2814 " -c Check whether input is sorted\n" \
2815 " -d Dictionary order (blank or alphanumeric only)\n" \
2816 " -f Ignore case\n" \
2817 " -g General numerical sort\n" \
2818 " -i Ignore unprintable characters\n" \
2819 " -k Specify sort key\n" \
2820 " -M Sort month\n") \
2821 " -n Sort numbers\n" \
2822 USE_FEATURE_SORT_BIG( \
2823 " -o Output to file\n" \
2824 " -k Sort by key\n" \
2825 " -t Use key separator other than whitespace\n") \
2826 " -r Reverse sort order\n" \
2827 USE_FEATURE_SORT_BIG( \
2828 " -s Stable (don't sort ties alphabetically)\n") \
2829 " -u Suppress duplicate lines" \
2830 USE_FEATURE_SORT_BIG( \
2831 "\n -z Input terminated by nulls, not newlines\n") \
2832 USE_FEATURE_SORT_BIG( \
2833 " -mST Ignored for GNU compatibility") \
2835 #define sort_example_usage \
2836 "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
2843 USE_FEATURE_SORT_BIG( \
2844 "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \
2851 #define start_stop_daemon_trivial_usage \
2852 "[OPTIONS] [--start|--stop] ... [-- arguments...]"
2853 #define start_stop_daemon_full_usage \
2854 "Start and stop services" \
2856 "\n -S|--start Start" \
2857 "\n -K|--stop Stop" \
2858 "\n -a|--startas <pathname> Starts process specified by pathname" \
2859 "\n -b|--background Force process into background" \
2860 "\n -u|--user <username>|<uid> Stop this user's processes" \
2861 "\n -x|--exec <executable> Program to either start or check" \
2862 "\n -m|--make-pidfile Create the -p file and enter pid in it" \
2863 "\n -n|--name <process-name> Stop processes with this name" \
2864 "\n -p|--pidfile <pid-file> Save or load pid using a pid-file" \
2865 "\n -q|--quiet Be quiet" \
2866 USE_FEATURE_START_STOP_DAEMON_FANCY( \
2867 "\n -o|--oknodo Exit status 0 if nothing done" \
2868 "\n -v|--verbose Be verbose" \
2869 "\n -N|--nicelevel <N> Add N to process's nice level" \
2871 "\n -s|--signal <signal> Signal to send (default TERM)" \
2872 "\n -U|--chuid <username>|<uid> Start process with this name"
2874 #define stat_trivial_usage \
2876 #define stat_full_usage \
2877 "Display file (default) or filesystem status" \
2879 USE_FEATURE_STAT_FORMAT( \
2880 " -c fmt Use the specified format\n") \
2881 " -f Display filesystem status\n" \
2882 " -L,-l Dereference links\n" \
2883 " -t Display info in terse form" \
2884 USE_FEATURE_STAT_FORMAT( \
2885 "\n\nValid format sequences for files:\n" \
2886 " %a Access rights in octal\n" \
2887 " %A Access rights in human readable form\n" \
2888 " %b Number of blocks allocated (see %B)\n" \
2889 " %B The size in bytes of each block reported by %b\n" \
2890 " %d Device number in decimal\n" \
2891 " %D Device number in hex\n" \
2892 " %f Raw mode in hex\n" \
2894 " %g Group ID of owner\n" \
2895 " %G Group name of owner\n" \
2896 " %h Number of hard links\n" \
2897 " %i Inode number\n" \
2899 " %N Quoted file name with dereference if symbolic link\n" \
2900 " %o I/O block size\n" \
2901 " %s Total size, in bytes\n" \
2902 " %t Major device type in hex\n" \
2903 " %T Minor device type in hex\n" \
2904 " %u User ID of owner\n" \
2905 " %U User name of owner\n" \
2906 " %x Time of last access\n" \
2907 " %X Time of last access as seconds since Epoch\n" \
2908 " %y Time of last modification\n" \
2909 " %Y Time of last modification as seconds since Epoch\n" \
2910 " %z Time of last change\n" \
2911 " %Z Time of last change as seconds since Epoch\n" \
2912 "\nValid format sequences for file systems:\n" \
2913 " %a Free blocks available to non-superuser\n" \
2914 " %b Total data blocks in file system\n" \
2915 " %c Total file nodes in file system\n" \
2916 " %d Free file nodes in file system\n" \
2917 " %f Free blocks in file system\n" \
2918 " %i File System ID in hex\n" \
2919 " %l Maximum length of filenames\n" \
2921 " %s Block size (for faster transfers)\n" \
2922 " %S Fundamental block size (for block counts)\n" \
2923 " %t Type in hex\n" \
2924 " %T Type in human readable form" \
2927 #define strings_trivial_usage \
2928 "[-afo] [-n length] [file ... ]"
2929 #define strings_full_usage \
2930 "Display printable strings in a binary file" \
2932 "\n -a Scan the whole files (this is the default)" \
2933 "\n -f Precede each string with the name of the file where it was found" \
2934 "\n -n N Specifies that at least N characters forms a sequence (default 4)" \
2935 "\n -o Each string is preceded by its decimal offset in the file"
2937 #define stty_trivial_usage \
2938 "[-a|g] [-F DEVICE] [SETTING]..."
2939 #define stty_full_usage \
2940 "Without arguments, prints baud rate, line discipline,\n" \
2941 "and deviations from stty sane" \
2943 "\n -F DEVICE Open device instead of stdin" \
2944 "\n -a Print all current settings in human-readable form" \
2945 "\n -g Print in stty-readable form" \
2946 "\n [SETTING] See manpage"
2948 #define su_trivial_usage \
2949 "[OPTION]... [-] [username]"
2950 #define su_full_usage \
2951 "Change user id or become root" \
2953 "\n -p, -m Preserve environment" \
2954 "\n -c Command to pass to 'sh -c'" \
2955 "\n -s Shell to use instead of default shell"
2957 #define sulogin_trivial_usage \
2958 "[OPTION]... [tty-device]"
2959 #define sulogin_full_usage \
2960 "Single user login" \
2964 #define sum_trivial_usage \
2966 #define sum_full_usage \
2967 "Checksum and count the blocks in a file" \
2969 " -r Use BSD sum algorithm (1K blocks)\n" \
2970 " -s Use System V sum algorithm (512byte blocks)"
2972 #define sv_trivial_usage \
2973 "[-v] [-w sec] command service..."
2974 #define sv_full_usage \
2975 "Report the current status and control the state of services " \
2976 "monitored by the runsv supervisor"
2978 #define svlogd_trivial_usage \
2979 "[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..."
2980 #define svlogd_full_usage \
2981 "Continuously read log data from standard input, optionally " \
2982 "filter log messages, and write the data to one or more automatically " \
2985 #define swapoff_trivial_usage \
2987 #define swapoff_full_usage \
2988 "Stop swapping virtual memory pages on DEVICE" \
2990 " -a Stop swapping on all swap devices"
2992 #define swapon_trivial_usage \
2994 #define swapon_full_usage \
2995 "Start swapping virtual memory pages on DEVICE" \
2997 " -a Start swapping on all swap devices"
2999 #define switch_root_trivial_usage \
3000 "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]"
3001 #define switch_root_full_usage \
3002 "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \
3003 "and exec NEW_INIT" \
3005 " -c Redirect console to device on new root"
3007 #define sync_trivial_usage \
3009 #define sync_full_usage \
3010 "Write all buffered filesystem blocks to disk"
3012 #define sysctl_trivial_usage \
3013 "[OPTIONS]... [VALUE]..."
3014 #define sysctl_full_usage \
3015 "Configure kernel parameters at runtime" \
3017 " -n Use this option to disable printing of the key name when printing values\n" \
3018 " -w Use this option when you want to change a sysctl setting\n" \
3019 " -p Load in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \
3020 " -a Display all values currently available\n" \
3021 " -A Display all values currently available in table form"
3022 #define sysctl_example_usage \
3023 "sysctl [-n] variable ...\n" \
3024 "sysctl [-n] -w variable=value ...\n" \
3025 "sysctl [-n] -a\n" \
3026 "sysctl [-n] -p <file> (default /etc/sysctl.conf)\n" \
3029 #define syslogd_trivial_usage \
3031 #define syslogd_full_usage \
3032 "System logging utility.\n" \
3033 "Note that this version of syslogd ignores /etc/syslog.conf." \
3035 "\n -m MIN Minutes between MARK lines (default=20, 0=off)" \
3036 "\n -n Run as foreground process" \
3037 "\n -O FILE Use an alternate log file (default=/var/log/messages)" \
3038 "\n -l n Sets the local log level of messages to n" \
3039 "\n -S Make logging output smaller" \
3040 USE_FEATURE_ROTATE_LOGFILE( \
3041 "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \
3042 "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \
3043 USE_FEATURE_REMOTE_LOG( \
3044 "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
3045 "\n -L Log locally and via network logging (default is network only)") \
3046 USE_FEATURE_IPC_SYSLOG( \
3047 "\n -C[size(KiB)] Log to a shared mem buffer (read the buffer using logread)")
3048 /* NB: -Csize shouldn't have space (because size is optional) */
3049 #define syslogd_example_usage \
3050 "$ syslogd -R masterlog:514\n" \
3051 "$ syslogd -R 192.168.1.1:601\n"
3053 #define tail_trivial_usage \
3054 "[OPTION]... [FILE]..."
3055 #define tail_full_usage \
3056 "Print last 10 lines of each FILE to standard output.\n" \
3057 "With more than one FILE, precede each with a header giving the\n" \
3058 "file name. With no FILE, or when FILE is -, read standard input." \
3060 USE_FEATURE_FANCY_TAIL( \
3061 "\n -c N[kbm] Output the last N bytes") \
3062 "\n -n N[kbm] Print last N lines instead of last 10" \
3063 "\n -f Output data as the file grows" \
3064 USE_FEATURE_FANCY_TAIL( \
3065 "\n -q Never output headers giving file names" \
3066 "\n -s SEC Wait SEC seconds between reads with -f" \
3067 "\n -v Always output headers giving file names" \
3069 "If the first character of N (bytes or lines) is a '+', output begins with\n" \
3070 "the Nth item from the start of each file, otherwise, print the last N items\n" \
3071 "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
3072 #define tail_example_usage \
3073 "$ tail -n 1 /etc/resolv.conf\n" \
3074 "nameserver 10.0.0.1\n"
3076 #define tar_trivial_usage \
3077 "-[" USE_FEATURE_TAR_CREATE("c") USE_FEATURE_TAR_GZIP("z") \
3078 USE_FEATURE_TAR_BZIP2("j") USE_FEATURE_TAR_LZMA("a") \
3079 USE_FEATURE_TAR_COMPRESS("Z") "xtvO] " \
3080 USE_FEATURE_TAR_FROM("[-X FILE] ") \
3081 "[-f TARFILE] [-C DIR] [FILE(s)] ..."
3082 #define tar_full_usage \
3083 "Create, extract, or list files from a tar file" \
3085 USE_FEATURE_TAR_CREATE( \
3089 "\nArchive format selection:\n" \
3090 USE_FEATURE_TAR_GZIP( \
3091 " z Filter the archive through gzip\n") \
3092 USE_FEATURE_TAR_BZIP2( \
3093 " j Filter the archive through bzip2\n") \
3094 USE_FEATURE_TAR_LZMA( \
3095 " a Filter the archive through lzma\n") \
3096 USE_FEATURE_TAR_COMPRESS( \
3097 " Z Filter the archive through compress\n") \
3098 "\nFile selection:\n" \
3099 " f Name of TARFILE or \"-\" for stdin\n" \
3100 " O Extract to stdout\n" \
3101 USE_FEATURE_TAR_FROM( \
3102 " exclude File to exclude\n" \
3103 " X File with names to exclude\n") \
3104 " C Change to directory DIR before operation\n" \
3105 " v Verbosely list files processed"
3106 #define tar_example_usage \
3107 "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
3108 "$ tar -cf /tmp/tarball.tar /usr/local\n"
3110 #define taskset_trivial_usage \
3111 "[OPTIONS] [mask] [pid | command [arg]...]"
3112 #define taskset_full_usage \
3113 "Set or get CPU affinity" \
3115 " -p Operate on an existing PID"
3116 #define taskset_example_usage \
3117 "$ taskset 0x7 ./dgemm_test&\n" \
3118 "$ taskset -p 0x1 $!\n" \
3119 "pid 4790's current affinity mask: 7\n" \
3120 "pid 4790's new affinity mask: 1\n" \
3121 "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
3122 "pid 6671's current affinity mask: 1\n" \
3123 "pid 6671's new affinity mask: 1\n" \
3124 "$ taskset -p 1\n" \
3125 "pid 1's current affinity mask: 3\n"
3127 #define tee_trivial_usage \
3128 "[OPTION]... [FILE]..."
3129 #define tee_full_usage \
3130 "Copy standard input to each FILE, and also to standard output" \
3132 " -a Append to the given FILEs, do not overwrite\n" \
3133 " -i Ignore interrupt signals (SIGINT)"
3134 #define tee_example_usage \
3135 "$ echo \"Hello\" | tee /tmp/foo\n" \
3136 "$ cat /tmp/foo\n" \
3139 #ifdef CONFIG_FEATURE_TELNET_AUTOLOGIN
3140 #define telnet_trivial_usage \
3141 "[-a] [-l USER] HOST [PORT]"
3142 #define telnet_full_usage \
3143 "Connect to remote telnet server" \
3145 " -a Attempt an automatic login with the USER variable\n" \
3146 " -l USER Attempt an automatic login with the USER argument\n" \
3147 " HOST The official name, alias or the IP address of the\n" \
3149 " PORT The remote port number to connect to. If it is not\n" \
3150 " specified, the default telnet (23) port is used."
3152 #define telnet_trivial_usage \
3154 #define telnet_full_usage \
3155 "Connect to remote telnet server"
3158 #define telnetd_trivial_usage \
3160 #define telnetd_full_usage \
3161 "Handle incoming telnet connections" \
3162 SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") \
3164 "\n -l LOGIN Exec LOGIN on connect" \
3165 "\n -f issue_file Display issue_file instead of /etc/issue" \
3166 USE_FEATURE_TELNETD_STANDALONE( \
3167 "\n -p PORT Port to listen to" \
3168 "\n -b ADDR Address to bind to" \
3169 "\n -F Stay in foreground" \
3170 "\n -i Run as inetd subservice" \
3173 #define test_trivial_usage \
3174 "EXPRESSION\n or [ EXPRESSION ]"
3175 #define test_full_usage \
3176 "Check file types and compares values returning an exit code\n" \
3177 "determined by the value of EXPRESSION"
3178 #define test_example_usage \
3179 "$ test 1 -eq 2\n" \
3182 "$ test 1 -eq 1\n" \
3188 "$ [ -d /junk ]\n" \
3192 #define tftp_trivial_usage \
3193 "[OPTION]... HOST [PORT]"
3194 #define tftp_full_usage \
3195 "Transfer a file from/to tftp server using \"octet\" mode" \
3197 "\n -l FILE Local FILE" \
3198 "\n -r FILE Remote FILE" \
3199 USE_FEATURE_TFTP_GET( \
3202 USE_FEATURE_TFTP_PUT( \
3205 USE_FEATURE_TFTP_BLOCKSIZE( \
3206 "\n -b SIZE Transfer blocks of SIZE octets" \
3208 #define time_trivial_usage \
3209 "[OPTION]... COMMAND [ARGS...]"
3210 #define time_full_usage \
3211 "Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
3212 "COMMAND's resource usage information is displayed." \
3214 " -v Display verbose resource usage information"
3216 #define top_trivial_usage \
3217 "[-b] [-n count] [-d seconds]"
3218 #define top_full_usage \
3219 "Provide a view of process activity in real time.\n" \
3220 "Read the status of all processes from /proc each <seconds>\n" \
3221 "and show the status for however many processes will fit on the screen."
3223 #define touch_trivial_usage \
3224 "[-c] FILE [FILE ...]"
3225 #define touch_full_usage \
3226 "Update the last-modified date on the given FILE[s]" \
3228 " -c Do not create any files"
3229 #define touch_example_usage \
3230 "$ ls -l /tmp/foo\n" \
3231 "/bin/ls: /tmp/foo: No such file or directory\n" \
3232 "$ touch /tmp/foo\n" \
3233 "$ ls -l /tmp/foo\n" \
3234 "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
3236 #define tr_trivial_usage \
3237 "[-cds] STRING1 [STRING2]"
3238 #define tr_full_usage \
3239 "Translate, squeeze, and/or delete characters from\n" \
3240 "standard input, writing to standard output" \
3242 " -c Take complement of STRING1\n" \
3243 " -d Delete input characters coded STRING1\n" \
3244 " -s Squeeze multiple output characters of STRING2 into one character"
3245 #define tr_example_usage \
3246 "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
3249 #define traceroute_trivial_usage \
3250 "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \
3251 " [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \
3252 " [-z pausemsecs] host [data size]"
3253 #define traceroute_full_usage \
3254 "Trace the route ip packets follow going to \"host\"" \
3256 " -F Set the don't fragment bit\n" \
3257 " -I Use ICMP ECHO instead of UDP datagrams\n" \
3258 " -l Display the ttl value of the returned packet\n" \
3259 " -d Set SO_DEBUG options to socket\n" \
3260 " -n Print hop addresses numerically rather than symbolically\n" \
3261 " -r Bypass the normal routing tables and send directly to a host\n" \
3262 " -v Verbose output\n" \
3263 " -m max_ttl Set the max time-to-live (max number of hops)\n" \
3264 " -p port# Set the base UDP port number used in probes\n" \
3265 " (default is 33434)\n" \
3266 " -q nqueries Set the number of probes per 'ttl' to nqueries\n" \
3267 " (default is 3)\n" \
3268 " -s src_addr Use the following IP address as the source address\n" \
3269 " -t tos Set the type-of-service in probe packets to the following value\n" \
3271 " -w wait Set the time (in seconds) to wait for a response to a probe\n" \
3272 " (default 3 sec)\n" \
3273 " -g Specify a loose source route gateway (8 maximum)"
3276 #define true_trivial_usage \
3278 #define true_full_usage \
3279 "Return an exit code of TRUE (0)"
3280 #define true_example_usage \
3285 #define tty_trivial_usage \
3287 #define tty_full_usage \
3288 "Print the file name of the terminal connected to standard input" \
3290 " -s Print nothing, only return an exit status"
3291 #define tty_example_usage \
3295 #define tune2fs_trivial_usage \
3296 "[-c max-mounts-count] [-e errors-behavior] [-g group] " \
3297 "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " \
3298 "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " \
3299 "[-r reserved-blocks-count] [-u user] [-C mount-count] " \
3300 "[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \
3301 "[-T last-check-time] [-U UUID] device"
3302 #define tune2fs_full_usage \
3303 "Adjust filesystem options on ext[23] filesystems"
3305 #define udhcpc_trivial_usage \
3306 "[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
3307 #define udhcpc_full_usage \
3308 " -V,--vendorclass=CLASSID Set vendor class identifier\n" \
3309 " -i,--interface=INTERFACE Interface to use (default: eth0)\n" \
3310 " -H,-h,--hostname=HOSTNAME Client hostname\n" \
3311 " -c,--clientid=CLIENTID Set client identifier\n" \
3312 " -C,--clientid-none Suppress default client identifier\n" \
3313 " -p,--pidfile=file Store process ID of daemon in file\n" \
3314 " -r,--request=IP IP address to request (default: none)\n" \
3315 " -s,--script=file Run file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \
3316 " -t,--retries=NUM Send up to NUM request packets\n"\
3317 " -f,--foreground Do not fork after getting lease\n" \
3318 " -b,--background Fork to background if lease cannot be immediately negotiated\n" \
3319 " -n,--now Exit with failure if lease cannot be immediately negotiated\n" \
3320 " -q,--quit Quit after obtaining lease\n" \
3321 " -R,--release Release IP on quit\n" \
3322 " -v,--version Display version" \
3324 #define udhcpd_trivial_usage \
3327 #define udhcpd_full_usage \
3330 #define umount_trivial_usage \
3331 "[flags] FILESYSTEM|DIRECTORY"
3332 #define umount_full_usage \
3333 "Unmount file systems" \
3335 "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
3336 USE_FEATURE_MTAB_SUPPORT( \
3337 "\n -n Don't erase /etc/mtab entries") \
3338 "\n -r Try to remount devices as read-only if mount is busy" \
3339 "\n -l Lazy umount (detach filesystem)" \
3340 "\n -f Force umount (i.e., unreachable NFS server)" \
3341 USE_FEATURE_MOUNT_LOOP( \
3342 "\n -D Do not free loop device (if a loop device has been used)")
3343 #define umount_example_usage \
3344 "$ umount /dev/hdc1\n"
3346 #define uname_trivial_usage \
3348 #define uname_full_usage \
3349 "Print certain system information. With no OPTION, same as -s." \
3351 " -a Print all information\n" \
3352 " -m The machine (hardware) type\n" \
3353 " -n Print the machine's network node hostname\n" \
3354 " -r Print the operating system release\n" \
3355 " -s Print the operating system name\n" \
3356 " -p Print the host processor type\n" \
3357 " -v Print the operating system version"
3358 #define uname_example_usage \
3360 "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
3362 #define uncompress_trivial_usage \
3363 "[-c] [-f] [ name ... ]"
3364 #define uncompress_full_usage \
3365 "Uncompress .Z file[s]" \
3367 " -c Extract to stdout\n" \
3368 " -f Force overwrite an existing file"
3370 #define uniq_trivial_usage \
3371 "[-fscdu]... [INPUT [OUTPUT]]"
3372 #define uniq_full_usage \
3373 "Discard all but one of successive identical lines from INPUT\n" \
3374 "(or standard input), writing to OUTPUT (or standard output)" \
3376 " -c Prefix lines by the number of occurrences\n" \
3377 " -d Only print duplicate lines\n" \
3378 " -u Only print unique lines\n" \
3379 " -f N Skip the first N fields\n" \
3380 " -s N Skip the first N chars (after any skipped fields)"
3381 #define uniq_example_usage \
3382 "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
3387 #define unix2dos_trivial_usage \
3389 #define unix2dos_full_usage \
3390 "Convert FILE from unix format to dos format. When no option\n" \
3391 "is given, the input is converted to the opposite output format.\n" \
3392 "When no file is given, use stdin for input and stdout for output." \
3394 " -u Output will be in UNIX format\n" \
3395 " -d Output will be in DOS format"
3397 #define unzip_trivial_usage \
3398 "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
3399 #define unzip_full_usage \
3400 "Extract files from ZIP archives" \
3402 " -l List archive contents (short form)\n" \
3403 " -n Never overwrite existing files (default)\n" \
3404 " -o Overwrite files without prompting\n" \
3405 " -p Send output to stdout\n" \
3407 " -x Exclude these files\n" \
3408 " -d Extract files into this directory"
3410 #define uptime_trivial_usage \
3412 #define uptime_full_usage \
3413 "Display the time since the last boot"
3414 #define uptime_example_usage \
3416 " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
3418 #define usleep_trivial_usage \
3420 #define usleep_full_usage \
3421 "Pause for N microseconds"
3422 #define usleep_example_usage \
3423 "$ usleep 1000000\n" \
3424 "[pauses for 1 second]\n"
3426 #define uudecode_trivial_usage \
3428 #define uudecode_full_usage \
3431 " -o FILE Direct output to FILE"
3432 #define uudecode_example_usage \
3433 "$ uudecode -o busybox busybox.uu\n" \
3434 "$ ls -l busybox\n" \
3435 "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
3437 #define uuencode_trivial_usage \
3438 "[OPTION] [INFILE] REMOTEFILE"
3439 #define uuencode_full_usage \
3442 " -m Use base64 encoding per RFC1521"
3443 #define uuencode_example_usage \
3444 "$ uuencode busybox busybox\n" \
3445 "begin 755 busybox\n" \
3446 "<encoded file snipped>\n" \
3447 "$ uudecode busybox busybox > busybox.uu\n" \
3450 #define vconfig_trivial_usage \
3451 "COMMAND [OPTIONS] ..."
3452 #define vconfig_full_usage \
3453 "Create and remove virtual ethernet devices" \
3455 " add [interface-name] [vlan_id]\n" \
3456 " rem [vlan-name]\n" \
3457 " set_flag [interface-name] [flag-num] [0 | 1]\n" \
3458 " set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
3459 " set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
3460 " set_name_type [name-type]"
3462 #define vi_trivial_usage \
3463 "[OPTION] [FILE]..."
3464 #define vi_full_usage \
3467 " -R Read-only - do not write to the file"
3469 #define vlock_trivial_usage \
3471 #define vlock_full_usage \
3472 "Lock a virtual terminal. A password is required to unlock." \
3476 #define watch_trivial_usage \
3477 "[-n <seconds>] [-t] COMMAND..."
3478 #define watch_full_usage \
3479 "Execute a program periodically" \
3481 " -n Loop period in seconds - default is 2\n" \
3482 " -t Don't print header"
3483 #define watch_example_usage \
3485 "Mon Dec 17 10:31:40 GMT 2000\n" \
3486 "Mon Dec 17 10:31:42 GMT 2000\n" \
3487 "Mon Dec 17 10:31:44 GMT 2000"
3489 #define watchdog_trivial_usage \
3490 "[-t <seconds>] [-F] DEV"
3491 #define watchdog_full_usage \
3492 "Periodically write to watchdog device DEV" \
3494 " -t Timer period in seconds - default is 30\n" \
3495 " -F Stay in the foreground and don't fork"
3497 #define wc_trivial_usage \
3498 "[OPTION]... [FILE]..."
3499 #define wc_full_usage \
3500 "Print line, word, and byte counts for each FILE, and a total line if\n" \
3501 "more than one FILE is specified. With no FILE, read standard input." \
3503 " -c Print the byte counts\n" \
3504 " -l Print the newline counts\n" \
3505 " -L Print the length of the longest line\n" \
3506 " -w Print the word counts"
3507 #define wc_example_usage \
3508 "$ wc /etc/passwd\n" \
3509 " 31 46 1365 /etc/passwd\n"
3511 #define wget_trivial_usage \
3512 "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \
3513 " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
3514 " [-U|--user-agent agent] url"
3515 #define wget_full_usage \
3516 "Retrieve files via HTTP or FTP" \
3518 " -c Continue retrieval of aborted transfers\n" \
3519 " -q Quiet mode - do not print\n" \
3520 " -P Set directory prefix to DIR\n" \
3521 " -O Save to filename ('-' for stdout)\n" \
3522 " -U Adjust 'User-Agent' field\n" \
3523 " -Y Use proxy ('on' or 'off')"
3525 #define which_trivial_usage \
3527 #define which_full_usage \
3529 #define which_example_usage \
3533 #define who_trivial_usage \
3535 #define who_full_usage \
3536 "Print the current user names and related information"
3538 #define whoami_trivial_usage \
3540 #define whoami_full_usage \
3541 "Print the user name associated with the current effective user id"
3543 #define xargs_trivial_usage \
3544 "[OPTIONS] [COMMAND] [ARGS...]"
3545 #define xargs_full_usage \
3546 "Execute COMMAND on every item given by standard input" \
3548 USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
3549 " -p Prompt the user about whether to run each command\n") \
3550 " -r Do not run command for empty read lines\n" \
3551 USE_FEATURE_XARGS_SUPPORT_TERMOPT( \
3552 " -x Exit if the size is exceeded\n") \
3553 USE_FEATURE_XARGS_SUPPORT_ZERO_TERM( \
3554 " -0 Input filenames are terminated by a null character\n") \
3555 " -t Print the command line on stderr before executing it"
3556 #define xargs_example_usage \
3557 "$ ls | xargs gzip\n" \
3558 "$ find . -name '*.c' -print | xargs rm\n"
3560 #define yes_trivial_usage \
3561 "[OPTION]... [STRING]..."
3562 #define yes_full_usage \
3563 "Repeatedly output a line with all specified STRING(s), or 'y'"
3565 #define zcat_trivial_usage \
3567 #define zcat_full_usage \
3568 "Uncompress to stdout"
3570 #define zcip_trivial_usage \
3571 "[OPTIONS] ifname script"
3572 #define zcip_full_usage \
3573 "Manage a ZeroConf IPv4 link-local address" \
3575 " -f foreground mode\n" \
3576 " -q quit after address (no daemon)\n" \
3577 " -r 169.254.x.x request this address first\n" \
3580 #endif /* __BB_USAGE_H__ */
projects / oweals / busybox.git / blob