davinci: omapl138_lcdk: switch to using common mmc args
[oweals/u-boot.git] / include / spi_flash.h
1 /*
2  * Common SPI flash Interface
3  *
4  * Copyright (C) 2008 Atmel Corporation
5  * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
6  *
7  * SPDX-License-Identifier:     GPL-2.0
8  */
9
10 #ifndef _SPI_FLASH_H_
11 #define _SPI_FLASH_H_
12
13 #include <dm.h> /* Because we dereference struct udevice here */
14 #include <linux/types.h>
15
16 #ifndef CONFIG_SF_DEFAULT_SPEED
17 # define CONFIG_SF_DEFAULT_SPEED        1000000
18 #endif
19 #ifndef CONFIG_SF_DEFAULT_MODE
20 # define CONFIG_SF_DEFAULT_MODE         SPI_MODE_3
21 #endif
22 #ifndef CONFIG_SF_DEFAULT_CS
23 # define CONFIG_SF_DEFAULT_CS           0
24 #endif
25 #ifndef CONFIG_SF_DEFAULT_BUS
26 # define CONFIG_SF_DEFAULT_BUS          0
27 #endif
28
29 struct spi_slave;
30
31 /**
32  * struct spi_flash - SPI flash structure
33  *
34  * @spi:                SPI slave
35  * @dev:                SPI flash device
36  * @name:               Name of SPI flash
37  * @dual_flash:         Indicates dual flash memories - dual stacked, parallel
38  * @shift:              Flash shift useful in dual parallel
39  * @flags:              Indication of spi flash flags
40  * @size:               Total flash size
41  * @page_size:          Write (page) size
42  * @sector_size:        Sector size
43  * @erase_size:         Erase size
44  * @bank_read_cmd:      Bank read cmd
45  * @bank_write_cmd:     Bank write cmd
46  * @bank_curr:          Current flash bank
47  * @erase_cmd:          Erase cmd 4K, 32K, 64K
48  * @read_cmd:           Read cmd - Array Fast, Extn read and quad read.
49  * @write_cmd:          Write cmd - page and quad program.
50  * @dummy_byte:         Dummy cycles for read operation.
51  * @memory_map:         Address of read-only SPI flash access
52  * @flash_lock:         lock a region of the SPI Flash
53  * @flash_unlock:       unlock a region of the SPI Flash
54  * @flash_is_locked:    check if a region of the SPI Flash is completely locked
55  * @read:               Flash read ops: Read len bytes at offset into buf
56  *                      Supported cmds: Fast Array Read
57  * @write:              Flash write ops: Write len bytes from buf into offset
58  *                      Supported cmds: Page Program
59  * @erase:              Flash erase ops: Erase len bytes from offset
60  *                      Supported cmds: Sector erase 4K, 32K, 64K
61  * return 0 - Success, 1 - Failure
62  */
63 struct spi_flash {
64         struct spi_slave *spi;
65 #ifdef CONFIG_DM_SPI_FLASH
66         struct udevice *dev;
67 #endif
68         const char *name;
69         u8 dual_flash;
70         u8 shift;
71         u16 flags;
72
73         u32 size;
74         u32 page_size;
75         u32 sector_size;
76         u32 erase_size;
77 #ifdef CONFIG_SPI_FLASH_BAR
78         u8 bank_read_cmd;
79         u8 bank_write_cmd;
80         u8 bank_curr;
81 #endif
82         u8 erase_cmd;
83         u8 read_cmd;
84         u8 write_cmd;
85         u8 dummy_byte;
86
87         void *memory_map;
88
89         int (*flash_lock)(struct spi_flash *flash, u32 ofs, size_t len);
90         int (*flash_unlock)(struct spi_flash *flash, u32 ofs, size_t len);
91         int (*flash_is_locked)(struct spi_flash *flash, u32 ofs, size_t len);
92 #ifndef CONFIG_DM_SPI_FLASH
93         /*
94          * These are not strictly needed for driver model, but keep them here
95          * while the transition is in progress.
96          *
97          * Normally each driver would provide its own operations, but for
98          * SPI flash most chips use the same algorithms. One approach is
99          * to create a 'common' SPI flash device which knows how to talk
100          * to most devices, and then allow other drivers to be used instead
101          * if required, perhaps with a way of scanning through the list to
102          * find the driver that matches the device.
103          */
104         int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf);
105         int (*write)(struct spi_flash *flash, u32 offset, size_t len,
106                         const void *buf);
107         int (*erase)(struct spi_flash *flash, u32 offset, size_t len);
108 #endif
109 };
110
111 struct dm_spi_flash_ops {
112         int (*read)(struct udevice *dev, u32 offset, size_t len, void *buf);
113         int (*write)(struct udevice *dev, u32 offset, size_t len,
114                      const void *buf);
115         int (*erase)(struct udevice *dev, u32 offset, size_t len);
116 };
117
118 /* Access the serial operations for a device */
119 #define sf_get_ops(dev) ((struct dm_spi_flash_ops *)(dev)->driver->ops)
120
121 #ifdef CONFIG_DM_SPI_FLASH
122 /**
123  * spi_flash_read_dm() - Read data from SPI flash
124  *
125  * @dev:        SPI flash device
126  * @offset:     Offset into device in bytes to read from
127  * @len:        Number of bytes to read
128  * @buf:        Buffer to put the data that is read
129  * @return 0 if OK, -ve on error
130  */
131 int spi_flash_read_dm(struct udevice *dev, u32 offset, size_t len, void *buf);
132
133 /**
134  * spi_flash_write_dm() - Write data to SPI flash
135  *
136  * @dev:        SPI flash device
137  * @offset:     Offset into device in bytes to write to
138  * @len:        Number of bytes to write
139  * @buf:        Buffer containing bytes to write
140  * @return 0 if OK, -ve on error
141  */
142 int spi_flash_write_dm(struct udevice *dev, u32 offset, size_t len,
143                        const void *buf);
144
145 /**
146  * spi_flash_erase_dm() - Erase blocks of the SPI flash
147  *
148  * Note that @len must be a muiltiple of the flash sector size.
149  *
150  * @dev:        SPI flash device
151  * @offset:     Offset into device in bytes to start erasing
152  * @len:        Number of bytes to erase
153  * @return 0 if OK, -ve on error
154  */
155 int spi_flash_erase_dm(struct udevice *dev, u32 offset, size_t len);
156
157 int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
158                            unsigned int max_hz, unsigned int spi_mode,
159                            struct udevice **devp);
160
161 /* Compatibility function - this is the old U-Boot API */
162 struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
163                                   unsigned int max_hz, unsigned int spi_mode);
164
165 /* Compatibility function - this is the old U-Boot API */
166 void spi_flash_free(struct spi_flash *flash);
167
168 static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
169                                  size_t len, void *buf)
170 {
171         return spi_flash_read_dm(flash->dev, offset, len, buf);
172 }
173
174 static inline int spi_flash_write(struct spi_flash *flash, u32 offset,
175                                   size_t len, const void *buf)
176 {
177         return spi_flash_write_dm(flash->dev, offset, len, buf);
178 }
179
180 static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
181                                   size_t len)
182 {
183         return spi_flash_erase_dm(flash->dev, offset, len);
184 }
185
186 struct sandbox_state;
187
188 int sandbox_sf_bind_emul(struct sandbox_state *state, int busnum, int cs,
189                          struct udevice *bus, int of_offset, const char *spec);
190
191 void sandbox_sf_unbind_emul(struct sandbox_state *state, int busnum, int cs);
192
193 #else
194 struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
195                 unsigned int max_hz, unsigned int spi_mode);
196
197 /**
198  * Set up a new SPI flash from an fdt node
199  *
200  * @param blob          Device tree blob
201  * @param slave_node    Pointer to this SPI slave node in the device tree
202  * @param spi_node      Cached pointer to the SPI interface this node belongs
203  *                      to
204  * @return 0 if ok, -1 on error
205  */
206 struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
207                                       int spi_node);
208
209 void spi_flash_free(struct spi_flash *flash);
210
211 static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
212                 size_t len, void *buf)
213 {
214         return flash->read(flash, offset, len, buf);
215 }
216
217 static inline int spi_flash_write(struct spi_flash *flash, u32 offset,
218                 size_t len, const void *buf)
219 {
220         return flash->write(flash, offset, len, buf);
221 }
222
223 static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
224                 size_t len)
225 {
226         return flash->erase(flash, offset, len);
227 }
228 #endif
229
230 static inline int spi_flash_protect(struct spi_flash *flash, u32 ofs, u32 len,
231                                         bool prot)
232 {
233         if (!flash->flash_lock || !flash->flash_unlock)
234                 return -EOPNOTSUPP;
235
236         if (prot)
237                 return flash->flash_lock(flash, ofs, len);
238         else
239                 return flash->flash_unlock(flash, ofs, len);
240 }
241
242 #endif /* _SPI_FLASH_H_ */