1 /* vi: set sw=4 ts=4: */
3 * Busybox main internal header file
5 * Based in part on code from sash, Copyright (c) 1999 by David I. Bell
6 * Permission has been granted to redistribute this code under the GPL.
8 * Licensed under the GPL version 2, see the file LICENSE in this tarball.
10 #ifndef __LIBBUSYBOX_H__
11 #define __LIBBUSYBOX_H__ 1
29 #include <sys/ioctl.h>
31 #include <sys/socket.h>
33 #include <sys/statfs.h>
35 #include <sys/types.h>
43 #include <selinux/selinux.h>
44 #include <selinux/context.h>
47 #if ENABLE_LOCALE_SUPPORT
50 #define setlocale(x,y) ((void)0)
55 /* ifdef it out, because it may include <shadow.h> */
56 /* and we may not even _have_ <shadow.h>! */
57 #if ENABLE_FEATURE_SHADOWPASSWDS
61 /* Try to pull in PATH_MAX */
63 #include <sys/param.h>
68 /* Tested to work correctly (IIRC :]) */
69 #define MAXINT(T) (T)( \
72 : (T)~((T)1 << (sizeof(T)*8-1)) \
75 #define MININT(T) (T)( \
78 : ((T)1 << (sizeof(T)*8-1)) \
81 /* Large file support */
82 /* Note that CONFIG_LFS forces bbox to be built with all common ops
83 * (stat, lseek etc) mapped to "largefile" variants by libc.
84 * Practically it means that open() automatically has O_LARGEFILE added
85 * and all filesize/file_offset parameters and struct members are "large"
86 * (in today's world - signed 64bit). For full support of large files,
87 * we need a few helper #defines (below) and careful use of off_t
88 * instead of int/ssize_t. No lseek64(), O_LARGEFILE etc necessary */
90 /* CONFIG_LFS is on */
91 # if ULONG_MAX > 0xffffffff
92 /* "long" is long enough on this system */
93 # define XATOOFF(a) xatoul_range(a, 0, LONG_MAX)
94 /* usage: sz = BB_STRTOOFF(s, NULL, 10); if (errno || sz < 0) die(); */
95 # define BB_STRTOOFF bb_strtoul
96 # define STRTOOFF strtoul
97 /* usage: printf("size: %"OFF_FMT"d (%"OFF_FMT"x)\n", sz, sz); */
100 /* "long" is too short, need "long long" */
101 # define XATOOFF(a) xatoull_range(a, 0, LLONG_MAX)
102 # define BB_STRTOOFF bb_strtoull
103 # define STRTOOFF strtoull
104 # define OFF_FMT "ll"
107 /* CONFIG_LFS is off */
108 # if UINT_MAX == 0xffffffff
109 /* While sizeof(off_t) == sizeof(int), off_t is typedef'ed to long anyway.
110 * gcc will throw warnings on printf("%d", off_t). Crap... */
111 # define XATOOFF(a) xatoi_u(a)
112 # define BB_STRTOOFF bb_strtou
113 # define STRTOOFF strtol
116 # define XATOOFF(a) xatoul_range(a, 0, LONG_MAX)
117 # define BB_STRTOOFF bb_strtoul
118 # define STRTOOFF strtol
122 /* scary. better ideas? (but do *test* them first!) */
123 #define OFF_T_MAX ((off_t)~((off_t)1 << (sizeof(off_t)*8-1)))
125 /* This structure defines protocol families and their handlers. */
131 char *(*print) (unsigned char *);
132 const char *(*sprint) (struct sockaddr *, int numeric);
133 int (*input) (/*int type,*/ const char *bufp, struct sockaddr *);
134 void (*herror) (char *text);
135 int (*rprint) (int options);
136 int (*rinput) (int typ, int ext, char **argv);
139 int (*getmask) (char *src, struct sockaddr * mask, char *name);
142 /* This structure defines hardware protocols and their handlers. */
148 char *(*print) (unsigned char *);
149 int (*input) (const char *, struct sockaddr *);
150 int (*activate) (int fd);
151 int suppress_null_addr;
154 /* Some useful definitions */
156 #define FALSE ((int) 0)
158 #define TRUE ((int) 1)
160 #define SKIP ((int) 2)
163 #define MTAB_GETMOUNTPT '1'
164 #define MTAB_GETDEVICE '2'
166 #define BUF_SIZE 8192
167 #define EXPAND_ALLOC 1024
169 /* Macros for min/max. */
171 #define MIN(a,b) (((a)<(b))?(a):(b))
175 #define MAX(a,b) (((a)>(b))?(a):(b))
178 /* buffer allocation schemes */
179 #if ENABLE_FEATURE_BUFFERS_GO_ON_STACK
180 #define RESERVE_CONFIG_BUFFER(buffer,len) char buffer[len]
181 #define RESERVE_CONFIG_UBUFFER(buffer,len) unsigned char buffer[len]
182 #define RELEASE_CONFIG_BUFFER(buffer) ((void)0)
184 #if ENABLE_FEATURE_BUFFERS_GO_IN_BSS
185 #define RESERVE_CONFIG_BUFFER(buffer,len) static char buffer[len]
186 #define RESERVE_CONFIG_UBUFFER(buffer,len) static unsigned char buffer[len]
187 #define RELEASE_CONFIG_BUFFER(buffer) ((void)0)
189 #define RESERVE_CONFIG_BUFFER(buffer,len) char *buffer=xmalloc(len)
190 #define RESERVE_CONFIG_UBUFFER(buffer,len) unsigned char *buffer=xmalloc(len)
191 #define RELEASE_CONFIG_BUFFER(buffer) free (buffer)
196 #if defined(__GLIBC__) && __GLIBC__ < 2
197 int vdprintf(int d, const char *format, va_list ap);
199 // This is declared here rather than #including <libgen.h> in order to avoid
200 // confusing the two versions of basename. See the dirname/basename man page
202 char *dirname(char *path);
203 /* Include our own copy of struct sysinfo to avoid binary compatibility
204 * problems with Linux 2.4, which changed things. Grumble, grumble. */
206 long uptime; /* Seconds since boot */
207 unsigned long loads[3]; /* 1, 5, and 15 minute load averages */
208 unsigned long totalram; /* Total usable main memory size */
209 unsigned long freeram; /* Available memory size */
210 unsigned long sharedram; /* Amount of shared memory */
211 unsigned long bufferram; /* Memory used by buffers */
212 unsigned long totalswap; /* Total swap space size */
213 unsigned long freeswap; /* swap space still available */
214 unsigned short procs; /* Number of current processes */
215 unsigned short pad; /* Padding needed for m68k */
216 unsigned long totalhigh; /* Total high memory size */
217 unsigned long freehigh; /* Available high memory size */
218 unsigned int mem_unit; /* Memory unit size in bytes */
219 char _f[20-2*sizeof(long)-sizeof(int)]; /* Padding: libc5 uses this.. */
221 extern int sysinfo(struct sysinfo* info);
224 extern void chomp(char *s);
225 extern void trim(char *s);
226 extern char *skip_whitespace(const char *);
227 extern char *skip_non_whitespace(const char *);
229 //TODO: supply a pointer to char[11] buffer (avoid statics)?
230 extern const char *bb_mode_string(mode_t mode);
231 extern int is_directory(const char *name, int followLinks, struct stat *statBuf);
232 extern int remove_file(const char *path, int flags);
233 extern int copy_file(const char *source, const char *dest, int flags);
234 #define action_recurse (1<<0)
235 #define action_followLinks (1<<1)
236 #define action_depthFirst (1<<2)
237 #define action_reverse (1<<3)
238 extern int recursive_action(const char *fileName, unsigned flags,
239 int (*fileAction) (const char *fileName, struct stat* statbuf, void* userData, int depth),
240 int (*dirAction) (const char *fileName, struct stat* statbuf, void* userData, int depth),
241 void* userData, const unsigned depth);
242 extern int device_open(const char *device, int mode);
243 extern int get_console_fd(void);
244 extern char *find_block_device(const char *path);
245 /* bb_copyfd_XX print read/write errors and return -1 if they occur */
246 extern off_t bb_copyfd_eof(int fd1, int fd2);
247 extern off_t bb_copyfd_size(int fd1, int fd2, off_t size);
248 extern void bb_copyfd_exact_size(int fd1, int fd2, off_t size);
249 /* "short" copy can be detected by return value < size */
250 /* this helper yells "short read!" if param is not -1 */
251 extern void complain_copyfd_and_die(off_t sz) ATTRIBUTE_NORETURN;
252 extern char bb_process_escape_sequence(const char **ptr);
253 /* TODO: sometimes modifies its parameter, which
254 * makes it rather inconvenient at times: */
255 extern char *bb_get_last_path_component(char *path);
257 int ndelay_on(int fd);
258 int ndelay_off(int fd);
259 void xmove_fd(int, int);
262 extern DIR *xopendir(const char *path);
263 extern DIR *warn_opendir(const char *path);
265 char *xrealloc_getcwd_or_warn(char *cwd);
266 char *xmalloc_readlink_or_warn(const char *path);
267 char *xmalloc_realpath(const char *path);
268 extern void xstat(const char *filename, struct stat *buf);
270 /* Unlike waitpid, waits ONLY for one process,
271 * It's safe to pass negative 'pids' from failed [v]fork -
272 * wait4pid will return -1 and ECHILD in errno.
273 * IOW: rc = wait4pid(spawn(argv));
274 * if (rc < 0) bb_perror_msg("%s", argv[0]);
275 * if (rc > 0) bb_error_msg("exit code: %d", rc);
277 extern int wait4pid(int pid);
278 extern int wait_pid(int *wstat, int pid);
279 extern int wait_nohang(int *wstat);
280 //TODO: signal(sid, f) is the same? then why?
281 extern void sig_catch(int,void (*)(int));
282 //#define sig_ignore(s) (sig_catch((s), SIG_IGN))
283 //#define sig_uncatch(s) (sig_catch((s), SIG_DFL))
284 extern void sig_block(int);
285 extern void sig_unblock(int);
286 /* UNUSED: extern void sig_blocknone(void);*/
287 extern void sig_pause(void);
289 #define wait_crashed(w) ((w) & 127)
290 #define wait_exitcode(w) ((w) >> 8)
291 #define wait_stopsig(w) ((w) >> 8)
292 #define wait_stopped(w) (((w) & 127) == 127)
296 extern void xsetgid(gid_t gid);
297 extern void xsetuid(uid_t uid);
298 extern void xchdir(const char *path);
299 extern void xsetenv(const char *key, const char *value);
300 extern int xopen(const char *pathname, int flags);
301 extern int xopen3(const char *pathname, int flags, int mode);
302 extern off_t xlseek(int fd, off_t offset, int whence);
303 extern off_t fdlength(int fd);
306 int xsocket(int domain, int type, int protocol);
307 void xbind(int sockfd, struct sockaddr *my_addr, socklen_t addrlen);
308 void xlisten(int s, int backlog);
309 void xconnect(int s, const struct sockaddr *s_addr, socklen_t addrlen);
310 int setsockopt_reuseaddr(int fd);
311 int setsockopt_broadcast(int fd);
312 /* NB: returns port in host byte order */
313 unsigned bb_lookup_port(const char *port, const char *protocol, unsigned default_port);
314 typedef struct len_and_sockaddr {
318 struct sockaddr_in sin;
319 #if ENABLE_FEATURE_IPV6
320 struct sockaddr_in6 sin6;
324 /* Create stream socket, and allocated suitable lsa
325 * (lsa of correct size and lsa->sa.sa_family (AF_INET/AF_INET6)) */
326 int xsocket_stream(len_and_sockaddr **lsap);
327 /* Create server TCP socket bound to bindaddr:port. bindaddr can be NULL,
328 * numeric IP ("N.N.N.N") or numeric IPv6 address,
329 * and can have ":PORT" suffix (for IPv6 use "[X:X:...:X]:PORT").
330 * If there is no suffix, port argument is used */
331 int create_and_bind_stream_or_die(const char *bindaddr, int port);
332 /* Create client TCP socket connected to peer:port. Peer cannot be NULL.
333 * Peer can be numeric IP ("N.N.N.N"), numeric IPv6 address or hostname,
334 * and can have ":PORT" suffix (for IPv6 use "[X:X:...:X]:PORT").
335 * If there is no suffix, port argument is used */
336 int create_and_connect_stream_or_die(const char *peer, int port);
337 /* Connect to peer identified by lsa */
338 int xconnect_stream(const len_and_sockaddr *lsa);
339 /* Return malloc'ed len_and_sockaddr with socket address of host:port
340 * Currently will return IPv4 or IPv6 sockaddrs only
341 * (depending on host), but in theory nothing prevents e.g.
342 * UNIX socket address being returned, IPX sockaddr etc...
343 * On error does bb_error_msg and returns NULL */
344 len_and_sockaddr* host2sockaddr(const char *host, int port);
345 /* Version which dies on error */
346 len_and_sockaddr* xhost2sockaddr(const char *host, int port);
347 len_and_sockaddr* xdotted2sockaddr(const char *host, int port);
348 #if ENABLE_FEATURE_IPV6
349 /* Same, useful if you want to force family (e.g. IPv6) */
350 len_and_sockaddr* host_and_af2sockaddr(const char *host, int port, sa_family_t af);
351 len_and_sockaddr* xhost_and_af2sockaddr(const char *host, int port, sa_family_t af);
353 /* [we evaluate af: think about "host_and_af2sockaddr(..., af++)"] */
354 #define host_and_af2sockaddr(host, port, af) ((void)(af), host2sockaddr((host), (port)))
355 #define xhost_and_af2sockaddr(host, port, af) ((void)(af), xhost2sockaddr((host), (port)))
357 /* Assign sin[6]_port member if the socket is of corresponding type,
358 * otherwise no-op. Useful for ftp.
359 * NB: does NOT do htons() internally, just direct assignment. */
360 void set_nport(len_and_sockaddr *lsa, unsigned port);
361 /* Retrieve sin[6]_port or return -1 for non-INET[6] lsa's */
362 int get_nport(const struct sockaddr *sa);
363 /* Reverse DNS. Returns NULL on failure. */
364 char* xmalloc_sockaddr2host(const struct sockaddr *sa, socklen_t salen);
365 /* This one doesn't append :PORTNUM */
366 char* xmalloc_sockaddr2host_noport(const struct sockaddr *sa, socklen_t salen);
367 /* This one also doesn't fall back to dotted IP (returns NULL) */
368 char* xmalloc_sockaddr2hostonly_noport(const struct sockaddr *sa, socklen_t salen);
369 /* inet_[ap]ton on steroids */
370 char* xmalloc_sockaddr2dotted(const struct sockaddr *sa, socklen_t salen);
371 char* xmalloc_sockaddr2dotted_noport(const struct sockaddr *sa, socklen_t salen);
372 // "old" (ipv4 only) API
373 // users: traceroute.c hostname.c
374 struct hostent *xgethostbyname(const char *name);
375 // Also inetd.c and inetd.c are using gethostbyname(),
376 // + inet_common.c has additional IPv4-only stuff
379 extern char *xstrdup(const char *s);
380 extern char *xstrndup(const char *s, int n);
381 extern char *safe_strncpy(char *dst, const char *src, size_t size);
382 extern char *xasprintf(const char *format, ...) __attribute__ ((format (printf, 1, 2)));
383 // gcc-4.1.1 still isn't good enough at optimizing it
384 // (+200 bytes compared to macro)
385 //static ATTRIBUTE_ALWAYS_INLINE
386 //int LONE_DASH(const char *s) { return s[0] == '-' && !s[1]; }
387 //static ATTRIBUTE_ALWAYS_INLINE
388 //int NOT_LONE_DASH(const char *s) { return s[0] != '-' || s[1]; }
389 #define LONE_DASH(s) ((s)[0] == '-' && !(s)[1])
390 #define NOT_LONE_DASH(s) ((s)[0] != '-' || (s)[1])
391 #define LONE_CHAR(s,c) ((s)[0] == (c) && !(s)[1])
392 #define NOT_LONE_CHAR(s,c) ((s)[0] != (c) || (s)[1])
394 /* dmalloc will redefine these to it's own implementation. It is safe
395 * to have the prototypes here unconditionally. */
396 extern void *xmalloc(size_t size);
397 extern void *xrealloc(void *old, size_t size);
398 extern void *xzalloc(size_t size);
400 extern ssize_t safe_read(int fd, void *buf, size_t count);
401 extern ssize_t full_read(int fd, void *buf, size_t count);
402 extern void xread(int fd, void *buf, size_t count);
403 extern unsigned char xread_char(int fd);
404 extern char *reads(int fd, char *buf, size_t count);
405 extern ssize_t read_close(int fd, void *buf, size_t count);
406 extern ssize_t open_read_close(const char *filename, void *buf, size_t count);
407 extern void *xmalloc_open_read_close(const char *filename, size_t *sizep);
409 extern ssize_t safe_write(int fd, const void *buf, size_t count);
410 extern ssize_t full_write(int fd, const void *buf, size_t count);
411 extern void xwrite(int fd, const void *buf, size_t count);
413 /* Reads and prints to stdout till eof, then closes FILE. Exits on error: */
414 extern void xprint_and_close_file(FILE *file);
415 extern char *xmalloc_fgets(FILE *file);
416 /* Read up to (and including) TERMINATING_STRING: */
417 extern char *xmalloc_fgets_str(FILE *file, const char *terminating_string);
418 /* Chops off '\n' from the end, unlike fgets: */
419 extern char *xmalloc_getline(FILE *file);
420 extern char *bb_get_chunk_from_file(FILE *file, int *end);
421 extern void die_if_ferror(FILE *file, const char *msg);
422 extern void die_if_ferror_stdout(void);
423 extern void xfflush_stdout(void);
424 extern void fflush_stdout_and_exit(int retval) ATTRIBUTE_NORETURN;
425 extern int fclose_if_not_stdin(FILE *file);
426 extern FILE *xfopen(const char *filename, const char *mode);
427 /* Prints warning to stderr and returns NULL on failure: */
428 extern FILE *fopen_or_warn(const char *filename, const char *mode);
429 /* "Opens" stdin if filename is special, else just opens file: */
430 extern FILE *fopen_or_warn_stdin(const char *filename);
433 extern char *utoa(unsigned n);
434 extern char *itoa(int n);
435 /* Returns a pointer past the formatted number, does NOT null-terminate */
436 extern char *utoa_to_buf(unsigned n, char *buf, unsigned buflen);
437 extern char *itoa_to_buf(int n, char *buf, unsigned buflen);
438 extern void smart_ulltoa5(unsigned long long ul, char buf[5]);
439 /* Put a string of hex bytes (ala "1b"), return advanced pointer */
440 extern char *bin2hex(char *buf, const char *cp, int count);
448 /* Using xatoi() instead of naive atoi() is not always convenient -
449 * in many places people want *non-negative* values, but store them
450 * in signed int. Therefore we need this one:
451 * dies if input is not in [0, INT_MAX] range. Also will reject '-0' etc */
452 int xatoi_u(const char *numstr);
453 /* Useful for reading port numbers */
454 uint16_t xatou16(const char *numstr);
457 /* These parse entries in /etc/passwd and /etc/group. This is desirable
458 * for BusyBox since we want to avoid using the glibc NSS stuff, which
459 * increases target size and is often not needed on embedded systems. */
460 long xuname2uid(const char *name);
461 long xgroup2gid(const char *name);
462 /* wrapper: allows string to contain numeric uid or gid */
463 unsigned long get_ug_id(const char *s, long (*xname2id)(const char *));
464 /* from chpst. Does not die, returns 0 on failure */
469 /* always sets uid and gid */
470 int get_uidgid(struct bb_uidgid_t*, const char*, int numeric_ok);
471 /* chown-like handling of "user[:[group]" */
472 void parse_chown_usergroup_or_die(struct bb_uidgid_t *u, char *user_group);
474 /*extern char *bb_getug(char *buffer, char *idname, long id, int bufsize, char prefix);*/
475 char *bb_getpwuid(char *name, long uid, int bufsize);
476 char *bb_getgrgid(char *group, long gid, int bufsize);
477 /* versions which cache results (useful for ps, ls etc) */
478 const char* get_cached_username(uid_t uid);
479 const char* get_cached_groupname(gid_t gid);
480 void clear_username_cache(void);
481 /* internally usernames are saved in fixed-sized char[] buffers */
482 enum { USERNAME_MAX_SIZE = 16 - sizeof(int) };
485 int execable_file(const char *name);
486 char *find_execable(const char *filename);
487 int exists_execable(const char *filename);
489 #if ENABLE_FEATURE_EXEC_PREFER_APPLETS
490 int bb_execvp(const char *file, char *const argv[]);
491 #define BB_EXECVP(prog,cmd) bb_execvp(prog,cmd)
492 #define BB_EXECLP(prog,cmd,...) \
493 execlp((find_applet_by_name(prog)) ? CONFIG_BUSYBOX_EXEC_PATH : prog, \
496 #define BB_EXECVP(prog,cmd) execvp(prog,cmd)
497 #define BB_EXECLP(prog,cmd,...) execlp(prog,cmd, __VA_ARGS__)
500 /* NOMMU friendy fork+exec */
501 pid_t spawn(char **argv);
502 pid_t xspawn(char **argv);
503 /* Helpers for daemonization.
505 * bb_daemonize(flags) = daemonize, does not compile on NOMMU
507 * bb_daemonize_or_rexec(flags, argv) = daemonizes on MMU (and ignores argv),
508 * rexec's itself on NOMMU with argv passed as command line.
509 * Thus bb_daemonize_or_rexec may cause your <applet>_main() to be re-executed
510 * from the start. (It will detect it and not reexec again second time).
511 * You have to audit carefully that you don't do something twice as a result
512 * (opening files/sockets, parsing config files etc...)!
514 * Both of the above will redirect fd 0,1,2 to /dev/null and drop ctty
515 * (will do setsid()).
517 * forkexit_or_rexec(argv) = bare-bones "fork + parent exits" on MMU,
518 * "vfork + re-exec ourself" on NOMMU. No fd redirection, no setsid().
519 * Currently used for openvt. On MMU ignores argv.
521 * Helper for network daemons in foreground mode:
523 * bb_sanitize_stdio() = make sure that fd 0,1,2 are opened by opening them
524 * to /dev/null if they are not.
527 DAEMON_CHDIR_ROOT = 1,
528 DAEMON_DEVNULL_STDIO = /* 2 */ 0, /* no users so far */
529 DAEMON_CLOSE_EXTRA_FDS = 4,
530 DAEMON_ONLY_SANITIZE = 8, /* internal use */
533 void forkexit_or_rexec(void);
534 # define forkexit_or_rexec(argv) forkexit_or_rexec()
535 # define bb_daemonize_or_rexec(flags, argv) bb_daemonize_or_rexec(flags)
536 # define bb_daemonize(flags) bb_daemonize_or_rexec(flags, bogus)
538 void forkexit_or_rexec(char **argv);
539 extern smallint re_execed;
540 # define fork() BUG_fork_is_unavailable_on_nommu()
541 # define daemon(a,b) BUG_daemon_is_unavailable_on_nommu()
542 # define bb_daemonize(a) BUG_bb_daemonize_is_unavailable_on_nommu()
544 void bb_daemonize_or_rexec(int flags, char **argv);
545 void bb_sanitize_stdio(void);
548 enum { BB_GETOPT_ERROR = 0x80000000 };
549 extern const char *opt_complementary;
550 #if ENABLE_GETOPT_LONG
551 extern const struct option *applet_long_options;
553 extern uint32_t option_mask32;
554 extern uint32_t getopt32(int argc, char **argv, const char *applet_opts, ...);
557 typedef struct llist_s {
559 struct llist_s *link;
561 extern void llist_add_to(llist_t **old_head, void *data);
562 extern void llist_add_to_end(llist_t **list_head, void *data);
563 extern void *llist_pop(llist_t **elm);
564 extern void llist_unlink(llist_t **head, llist_t *elm);
565 extern void llist_free(llist_t *elm, void (*freeit)(void *data));
566 extern llist_t* llist_rev(llist_t *list);
568 #if ENABLE_FEATURE_PIDFILE
569 int write_pidfile(const char *path);
570 #define remove_pidfile(f) ((void)unlink(f))
572 #define write_pidfile(f) 1
573 #define remove_pidfile(f) ((void)0)
578 LOGMODE_STDIO = 1<<0,
579 LOGMODE_SYSLOG = 1<<1,
580 LOGMODE_BOTH = LOGMODE_SYSLOG + LOGMODE_STDIO,
582 extern const char *msg_eol;
584 extern int die_sleep;
585 extern int xfunc_error_retval;
586 extern void sleep_and_die(void) ATTRIBUTE_NORETURN;
587 extern void bb_show_usage(void) ATTRIBUTE_NORETURN ATTRIBUTE_EXTERNALLY_VISIBLE;
588 extern void bb_error_msg(const char *s, ...) __attribute__ ((format (printf, 1, 2)));
589 extern void bb_error_msg_and_die(const char *s, ...) __attribute__ ((noreturn, format (printf, 1, 2)));
590 extern void bb_perror_msg(const char *s, ...) __attribute__ ((format (printf, 1, 2)));
591 extern void bb_perror_msg_and_die(const char *s, ...) __attribute__ ((noreturn, format (printf, 1, 2)));
592 extern void bb_vherror_msg(const char *s, va_list p);
593 extern void bb_herror_msg(const char *s, ...) __attribute__ ((format (printf, 1, 2)));
594 extern void bb_herror_msg_and_die(const char *s, ...) __attribute__ ((noreturn, format (printf, 1, 2)));
595 extern void bb_perror_nomsg_and_die(void) ATTRIBUTE_NORETURN;
596 extern void bb_perror_nomsg(void);
597 extern void bb_info_msg(const char *s, ...) __attribute__ ((format (printf, 1, 2)));
598 /* These are used internally -- you shouldn't need to use them */
599 extern void bb_verror_msg(const char *s, va_list p, const char *strerr);
600 extern void bb_vperror_msg(const char *s, va_list p);
601 extern void bb_vinfo_msg(const char *s, va_list p);
604 /* applets which are useful from another applets */
605 int bb_cat(char** argv);
606 int bb_echo(char** argv);
607 int bb_test(int argc, char** argv);
609 void bb_displayroutes(int noresolve, int netstatfmt);
611 int chown_main(int argc, char **argv);
613 int gunzip_main(int argc, char **argv);
615 int bbunpack(char **argv,
616 char* (*make_new_name)(char *filename),
617 USE_DESKTOP(long long) int (*unpacker)(void)
622 int create_icmp_socket(void);
623 int create_icmp6_socket(void);
625 extern int interface_opt_a;
626 int display_interfaces(char *ifname);
627 const struct aftype *get_aftype(const char *name);
628 const struct hwtype *get_hwtype(const char *name);
629 const struct hwtype *get_hwntype(int type);
632 #ifndef BUILD_INDIVIDUAL
633 extern struct BB_applet *find_applet_by_name(const char *name);
634 extern void run_applet_by_name(const char *name, int argc, char **argv);
637 extern struct mntent *find_mount_point(const char *name, const char *table);
638 extern void erase_mtab(const char * name);
639 extern unsigned int tty_baud_to_value(speed_t speed);
640 extern speed_t tty_value_to_baud(unsigned int value);
641 extern void bb_warn_ignoring_args(int n);
643 extern int get_linux_version_code(void);
645 extern char *query_loop(const char *device);
646 extern int del_loop(const char *device);
647 extern int set_loop(char **device, const char *file, unsigned long long offset);
650 //TODO: provide pointer to buf (avoid statics)?
651 const char *make_human_readable_str(unsigned long long size,
652 unsigned long block_size, unsigned long display_unit);
654 //TODO: pass buf pointer or return allocated buf (avoid statics)?
655 char *bb_askpass(int timeout, const char * prompt);
656 int bb_ask_confirmation(void);
657 int klogctl(int type, char * b, int len);
659 extern int bb_parse_mode(const char* s, mode_t* theMode);
661 char *concat_path_file(const char *path, const char *filename);
662 char *concat_subpath_file(const char *path, const char *filename);
663 char *last_char_is(const char *s, int c);
666 USE_DESKTOP(long long) int uncompress(int fd_in, int fd_out);
667 int inflate(int in, int out);
670 int bb_make_directory(char *path, long mode, int flags);
672 int get_signum(const char *name);
673 const char *get_signame(int number);
675 char *bb_simplify_path(const char *path);
678 extern void bb_do_delay(int seconds);
679 extern void change_identity(const struct passwd *pw);
680 extern const char *change_identity_e2str(const struct passwd *pw);
681 extern void run_shell(const char *shell, int loginshell, const char *command, const char **additional_args);
683 extern void renew_current_security_context(void);
684 extern void set_current_security_context(security_context_t sid);
685 extern context_t set_security_context_component(security_context_t cur_context,
686 char *user, char *role, char *type, char *range);
687 extern void setfscreatecon_or_die(security_context_t scontext);
689 extern void selinux_or_die(void);
690 extern int restricted_shell(const char *shell);
691 extern void setup_environment(const char *shell, int loginshell, int changeenv, const struct passwd *pw);
692 extern int correct_password(const struct passwd *pw);
693 extern char *pw_encrypt(const char *clear, const char *salt);
694 extern int obscure(const char *old, const char *newval, const struct passwd *pwdp);
695 extern int index_in_str_array(const char * const string_array[], const char *key);
696 extern int index_in_substr_array(const char * const string_array[], const char *key);
697 extern void print_login_issue(const char *issue_file, const char *tty);
698 extern void print_login_prompt(void);
701 extern int get_terminal_width_height(const int fd, int *width, int *height);
703 char *is_in_ino_dev_hashtable(const struct stat *statbuf);
704 void add_to_ino_dev_hashtable(const struct stat *statbuf, const char *name);
705 void reset_ino_dev_hashtable(void);
707 /* At least glibc has horrendously large inline for this, so wrap it */
708 extern unsigned long long bb_makedev(unsigned int major, unsigned int minor);
710 #define makedev(a,b) bb_makedev(a,b)
714 #if ENABLE_FEATURE_EDITING
715 /* It's NOT just ENABLEd or disabled. It's a number: */
716 #ifdef CONFIG_FEATURE_EDITING_HISTORY
717 #define MAX_HISTORY (CONFIG_FEATURE_EDITING_HISTORY + 0)
719 #define MAX_HISTORY 0
721 struct line_input_t {
723 const char *path_lookup;
727 USE_FEATURE_EDITING_SAVEHISTORY(const char *hist_file;)
728 char *history[MAX_HISTORY + 1];
732 DO_HISTORY = 1 * (MAX_HISTORY > 0),
733 SAVE_HISTORY = 2 * (MAX_HISTORY > 0) * ENABLE_FEATURE_EDITING_SAVEHISTORY,
734 TAB_COMPLETION = 4 * ENABLE_FEATURE_TAB_COMPLETION,
735 USERNAME_COMPLETION = 8 * ENABLE_FEATURE_USERNAME_COMPLETION,
736 VI_MODE = 0x10 * ENABLE_FEATURE_EDITING_VI,
737 WITH_PATH_LOOKUP = 0x20,
738 FOR_SHELL = DO_HISTORY | SAVE_HISTORY | TAB_COMPLETION | USERNAME_COMPLETION,
740 typedef struct line_input_t line_input_t;
741 line_input_t *new_line_input_t(int flags);
742 int read_line_input(const char* prompt, char* command, int maxsize, line_input_t *state);
744 int read_line_input(const char* prompt, char* command, int maxsize);
745 #define read_line_input(prompt, command, maxsize, state) \
746 read_line_input(prompt, command, maxsize)
752 enum { COMM_LEN = TASK_COMM_LEN };
754 /* synchronize with sizeof(task_struct.comm) in /usr/include/linux/sched.h */
755 enum { COMM_LEN = 16 };
760 /* Fields are set to 0/NULL if failed to determine (or not requested) */
763 unsigned long stime, utime;
770 /* basename of executable file in call to exec(2), size from */
771 /* sizeof(task_struct.comm) in /usr/include/linux/sched.h */
774 // user/group? - use passwd/group parsing functions
778 PSSCAN_PPID = 1 << 1,
779 PSSCAN_PGID = 1 << 2,
781 PSSCAN_UIDGID = 1 << 4,
782 PSSCAN_COMM = 1 << 5,
784 PSSCAN_STATE = 1 << 7,
786 PSSCAN_STIME = 1 << 9,
787 PSSCAN_UTIME = 1 << 10,
788 /* These are all retrieved from proc/NN/stat in one go: */
789 PSSCAN_STAT = PSSCAN_PPID | PSSCAN_PGID | PSSCAN_SID
790 | PSSCAN_COMM | PSSCAN_STATE
791 | PSSCAN_VSZ | PSSCAN_STIME | PSSCAN_UTIME,
793 procps_status_t* alloc_procps_scan(int flags);
794 void free_procps_scan(procps_status_t* sp);
795 procps_status_t* procps_scan(procps_status_t* sp, int flags);
796 pid_t *find_pid_by_name(const char* procName);
797 pid_t *pidlist_reverse(pid_t *pidList);
800 extern const char bb_uuenc_tbl_base64[];
801 extern const char bb_uuenc_tbl_std[];
802 void bb_uuencode(const unsigned char *s, char *store, const int length, const char *tbl);
804 typedef struct sha1_ctx_t {
809 void sha1_begin(sha1_ctx_t *ctx);
810 void sha1_hash(const void *data, size_t length, sha1_ctx_t *ctx);
811 void *sha1_end(void *resbuf, sha1_ctx_t *ctx);
813 typedef struct md5_ctx_t {
822 void md5_begin(md5_ctx_t *ctx);
823 void md5_hash(const void *data, size_t length, md5_ctx_t *ctx);
824 void *md5_end(void *resbuf, md5_ctx_t *ctx);
826 uint32_t *crc32_filltable(int endian);
829 enum { /* DO NOT CHANGE THESE VALUES! cp.c, mv.c, install.c depend on them. */
830 FILEUTILS_PRESERVE_STATUS = 1,
831 FILEUTILS_DEREFERENCE = 2,
834 FILEUTILS_INTERACTIVE = 0x10,
835 FILEUTILS_MAKE_HARDLINK = 0x20,
836 FILEUTILS_MAKE_SOFTLINK = 0x40,
838 FILEUTILS_PRESERVE_SECURITY_CONTEXT = 0x80,
839 FILEUTILS_SET_SECURITY_CONTEXT = 0x100
843 #define FILEUTILS_CP_OPTSTR "pdRfils" USE_SELINUX("c")
844 extern const char *applet_name;
845 extern const char BB_BANNER[];
847 extern const char bb_msg_full_version[];
848 extern const char bb_msg_memory_exhausted[];
849 extern const char bb_msg_invalid_date[];
850 extern const char bb_msg_read_error[];
851 extern const char bb_msg_write_error[];
852 extern const char bb_msg_unknown[];
853 extern const char bb_msg_can_not_create_raw_socket[];
854 extern const char bb_msg_perm_denied_are_you_root[];
855 extern const char bb_msg_requires_arg[];
856 extern const char bb_msg_invalid_arg[];
857 extern const char bb_msg_standard_input[];
858 extern const char bb_msg_standard_output[];
860 extern const char bb_str_default[];
861 /* NB: (bb_hexdigits_upcase[i] | 0x20) -> lowercase hex digit */
862 extern const char bb_hexdigits_upcase[];
864 extern const char bb_path_mtab_file[];
865 extern const char bb_path_nologin_file[];
866 extern const char bb_path_passwd_file[];
867 extern const char bb_path_shadow_file[];
868 extern const char bb_path_gshadow_file[];
869 extern const char bb_path_group_file[];
870 extern const char bb_path_securetty_file[];
871 extern const char bb_path_motd_file[];
872 extern const char bb_path_wtmp_file[];
873 extern const char bb_dev_null[];
875 extern const int const_int_0;
876 extern const int const_int_1;
881 extern char bb_common_bufsiz1[BUFSIZ+1];
882 /* This struct is deliberately not defined. */
883 /* See docs/keep_data_small.txt */
885 /* Magic prevents this from going into rodata */
886 /* If you want to assign a value, use PTR_TO_GLOBALS = xxx */
887 extern struct globals *const ptr_to_globals;
888 #define PTR_TO_GLOBALS (*(struct globals**)&ptr_to_globals)
890 /* You can change LIBBB_DEFAULT_LOGIN_SHELL, but don't use it,
891 * use bb_default_login_shell and following defines.
892 * If you change LIBBB_DEFAULT_LOGIN_SHELL,
893 * don't forget to change increment constant. */
894 #define LIBBB_DEFAULT_LOGIN_SHELL "-/bin/sh"
895 extern const char bb_default_login_shell[];
897 #define DEFAULT_SHELL (bb_default_login_shell+1)
899 #define DEFAULT_SHELL_SHORT_NAME (bb_default_login_shell+6)
902 #if ENABLE_FEATURE_DEVFS
903 # define CURRENT_VC "/dev/vc/0"
904 # define VC_1 "/dev/vc/1"
905 # define VC_2 "/dev/vc/2"
906 # define VC_3 "/dev/vc/3"
907 # define VC_4 "/dev/vc/4"
908 # define VC_5 "/dev/vc/5"
909 #if defined(__sh__) || defined(__H8300H__) || defined(__H8300S__)
910 /* Yes, this sucks, but both SH (including sh64) and H8 have a SCI(F) for their
911 respective serial ports .. as such, we can't use the common device paths for
913 # define SC_0 "/dev/ttsc/0"
914 # define SC_1 "/dev/ttsc/1"
915 # define SC_FORMAT "/dev/ttsc/%d"
917 # define SC_0 "/dev/tts/0"
918 # define SC_1 "/dev/tts/1"
919 # define SC_FORMAT "/dev/tts/%d"
921 # define VC_FORMAT "/dev/vc/%d"
922 # define LOOP_FORMAT "/dev/loop/%d"
923 # define LOOP_NAME "/dev/loop/"
924 # define FB_0 "/dev/fb/0"
926 # define CURRENT_VC "/dev/tty0"
927 # define VC_1 "/dev/tty1"
928 # define VC_2 "/dev/tty2"
929 # define VC_3 "/dev/tty3"
930 # define VC_4 "/dev/tty4"
931 # define VC_5 "/dev/tty5"
932 #if defined(__sh__) || defined(__H8300H__) || defined(__H8300S__)
933 # define SC_0 "/dev/ttySC0"
934 # define SC_1 "/dev/ttySC1"
935 # define SC_FORMAT "/dev/ttySC%d"
937 # define SC_0 "/dev/ttyS0"
938 # define SC_1 "/dev/ttyS1"
939 # define SC_FORMAT "/dev/ttyS%d"
941 # define VC_FORMAT "/dev/tty%d"
942 # define LOOP_FORMAT "/dev/loop%d"
943 # define LOOP_NAME "/dev/loop"
944 # define FB_0 "/dev/fb0"
947 /* The following devices are the same on devfs and non-devfs systems. */
948 #define CURRENT_TTY "/dev/tty"
949 #define DEV_CONSOLE "/dev/console"
953 /* Stop system and switch power off if possible. */
954 #define RB_POWER_OFF 0x4321fedc
957 /* Make sure we call functions instead of macros. */
971 /* This one is more efficient - we save ~400 bytes */
973 #define isdigit(a) ((unsigned)((a) - '0') <= 9)
980 #endif /* __LIBBUSYBOX_H__ */