1 /* vi: set sw=4 ts=4: */
3 * Busybox main internal header file
5 * Based in part on code from sash, Copyright (c) 1999 by David I. Bell
6 * Permission has been granted to redistribute this code under the GPL.
8 * Licensed under the GPL version 2, see the file LICENSE in this tarball.
10 #ifndef __LIBBUSYBOX_H__
11 #define __LIBBUSYBOX_H__ 1
29 #include <sys/ioctl.h>
31 #include <sys/socket.h>
34 #include <sys/types.h>
40 /* Try to pull in PATH_MAX */
42 #include <sys/param.h>
51 #ifdef HAVE_SYS_STATFS_H
52 #include <sys/statfs.h>
56 #include <selinux/selinux.h>
57 #include <selinux/context.h>
58 #include <selinux/flask.h>
59 #include <selinux/av_permissions.h>
62 #if ENABLE_LOCALE_SUPPORT
65 #define setlocale(x,y) ((void)0)
74 #if ENABLE_FEATURE_SHADOWPASSWDS
78 /* Some libc's forget to declare these, do it ourself */
80 extern char **environ;
81 #if defined(__GLIBC__) && __GLIBC__ < 2
82 int vdprintf(int d, const char *format, va_list ap);
84 /* klogctl is in libc's klog.h, but we cheat and not #include that */
85 int klogctl(int type, char *b, int len);
86 /* This is declared here rather than #including <libgen.h> in order to avoid
87 * confusing the two versions of basename. See the dirname/basename man page
89 char *dirname(char *path);
90 /* Include our own copy of struct sysinfo to avoid binary compatibility
91 * problems with Linux 2.4, which changed things. Grumble, grumble. */
93 long uptime; /* Seconds since boot */
94 unsigned long loads[3]; /* 1, 5, and 15 minute load averages */
95 unsigned long totalram; /* Total usable main memory size */
96 unsigned long freeram; /* Available memory size */
97 unsigned long sharedram; /* Amount of shared memory */
98 unsigned long bufferram; /* Memory used by buffers */
99 unsigned long totalswap; /* Total swap space size */
100 unsigned long freeswap; /* swap space still available */
101 unsigned short procs; /* Number of current processes */
102 unsigned short pad; /* Padding needed for m68k */
103 unsigned long totalhigh; /* Total high memory size */
104 unsigned long freehigh; /* Available high memory size */
105 unsigned int mem_unit; /* Memory unit size in bytes */
106 char _f[20 - 2 * sizeof(long) - sizeof(int)]; /* Padding: libc5 uses this.. */
108 int sysinfo(struct sysinfo* info);
111 /* Make all declarations hidden (-fvisibility flag only affects definitions) */
112 /* (don't include system headers after this until corresponding pop!) */
113 #if __GNUC_PREREQ(4,1)
114 # pragma GCC visibility push(hidden)
118 #if ENABLE_USE_BB_PWD_GRP
122 #if ENABLE_FEATURE_SHADOWPASSWDS
123 # if ENABLE_USE_BB_SHADOW
124 # include "shadow_.h"
128 /* Tested to work correctly with all int types (IIRC :]) */
129 #define MAXINT(T) (T)( \
132 : (T)~((T)1 << (sizeof(T)*8-1)) \
135 #define MININT(T) (T)( \
138 : ((T)1 << (sizeof(T)*8-1)) \
141 /* Large file support */
142 /* Note that CONFIG_LFS=y forces bbox to be built with all common ops
143 * (stat, lseek etc) mapped to "largefile" variants by libc.
144 * Practically it means that open() automatically has O_LARGEFILE added
145 * and all filesize/file_offset parameters and struct members are "large"
146 * (in today's world - signed 64bit). For full support of large files,
147 * we need a few helper #defines (below) and careful use of off_t
148 * instead of int/ssize_t. No lseek64(), O_LARGEFILE etc necessary */
150 /* CONFIG_LFS is on */
151 # if ULONG_MAX > 0xffffffff
152 /* "long" is long enough on this system */
153 # define XATOOFF(a) xatoul_range(a, 0, LONG_MAX)
154 /* usage: sz = BB_STRTOOFF(s, NULL, 10); if (errno || sz < 0) die(); */
155 # define BB_STRTOOFF bb_strtoul
156 # define STRTOOFF strtoul
157 /* usage: printf("size: %"OFF_FMT"d (%"OFF_FMT"x)\n", sz, sz); */
160 /* "long" is too short, need "long long" */
161 # define XATOOFF(a) xatoull_range(a, 0, LLONG_MAX)
162 # define BB_STRTOOFF bb_strtoull
163 # define STRTOOFF strtoull
164 # define OFF_FMT "ll"
167 /* CONFIG_LFS is off */
168 # if UINT_MAX == 0xffffffff
169 /* While sizeof(off_t) == sizeof(int), off_t is typedef'ed to long anyway.
170 * gcc will throw warnings on printf("%d", off_t). Crap... */
171 # define XATOOFF(a) xatoi_u(a)
172 # define BB_STRTOOFF bb_strtou
173 # define STRTOOFF strtol
176 # define XATOOFF(a) xatoul_range(a, 0, LONG_MAX)
177 # define BB_STRTOOFF bb_strtoul
178 # define STRTOOFF strtol
182 /* scary. better ideas? (but do *test* them first!) */
183 #define OFF_T_MAX ((off_t)~((off_t)1 << (sizeof(off_t)*8-1)))
185 /* Some useful definitions */
187 #define FALSE ((int) 0)
189 #define TRUE ((int) 1)
191 #define SKIP ((int) 2)
194 #define MTAB_GETMOUNTPT '1'
195 #define MTAB_GETDEVICE '2'
197 #define BUF_SIZE 8192
198 #define EXPAND_ALLOC 1024
200 /* Macros for min/max. */
202 #define MIN(a,b) (((a)<(b))?(a):(b))
206 #define MAX(a,b) (((a)>(b))?(a):(b))
209 /* buffer allocation schemes */
210 #if ENABLE_FEATURE_BUFFERS_GO_ON_STACK
211 #define RESERVE_CONFIG_BUFFER(buffer,len) char buffer[len]
212 #define RESERVE_CONFIG_UBUFFER(buffer,len) unsigned char buffer[len]
213 #define RELEASE_CONFIG_BUFFER(buffer) ((void)0)
215 #if ENABLE_FEATURE_BUFFERS_GO_IN_BSS
216 #define RESERVE_CONFIG_BUFFER(buffer,len) static char buffer[len]
217 #define RESERVE_CONFIG_UBUFFER(buffer,len) static unsigned char buffer[len]
218 #define RELEASE_CONFIG_BUFFER(buffer) ((void)0)
220 #define RESERVE_CONFIG_BUFFER(buffer,len) char *buffer = xmalloc(len)
221 #define RESERVE_CONFIG_UBUFFER(buffer,len) unsigned char *buffer = xmalloc(len)
222 #define RELEASE_CONFIG_BUFFER(buffer) free(buffer)
226 #if defined(__GLIBC__)
227 /* glibc uses __errno_location() to get a ptr to errno */
228 /* We can just memorize it once - no multithreading in busybox :) */
229 extern int *const bb_errno;
231 #define errno (*bb_errno)
234 unsigned long long monotonic_ns(void) FAST_FUNC;
235 unsigned long long monotonic_us(void) FAST_FUNC;
236 unsigned monotonic_sec(void) FAST_FUNC;
238 extern void chomp(char *s) FAST_FUNC;
239 extern void trim(char *s) FAST_FUNC;
240 extern char *skip_whitespace(const char *) FAST_FUNC;
241 extern char *skip_non_whitespace(const char *) FAST_FUNC;
242 extern char *strrstr(const char *haystack, const char *needle) FAST_FUNC;
244 //TODO: supply a pointer to char[11] buffer (avoid statics)?
245 extern const char *bb_mode_string(mode_t mode) FAST_FUNC;
246 extern int is_directory(const char *name, int followLinks, struct stat *statBuf) FAST_FUNC;
247 enum { /* DO NOT CHANGE THESE VALUES! cp.c, mv.c, install.c depend on them. */
248 FILEUTILS_PRESERVE_STATUS = 1,
249 FILEUTILS_DEREFERENCE = 2,
252 FILEUTILS_INTERACTIVE = 0x10,
253 FILEUTILS_MAKE_HARDLINK = 0x20,
254 FILEUTILS_MAKE_SOFTLINK = 0x40,
255 FILEUTILS_DEREF_SOFTLINK = 0x80,
257 FILEUTILS_PRESERVE_SECURITY_CONTEXT = 0x100,
258 FILEUTILS_SET_SECURITY_CONTEXT = 0x200
261 #define FILEUTILS_CP_OPTSTR "pdRfilsL" USE_SELINUX("c")
262 extern int remove_file(const char *path, int flags) FAST_FUNC;
263 /* NB: without FILEUTILS_RECUR in flags, it will basically "cat"
264 * the source, not copy (unless "source" is a directory).
265 * This makes "cp /dev/null file" and "install /dev/null file" (!!!)
266 * work coreutils-compatibly. */
267 extern int copy_file(const char *source, const char *dest, int flags) FAST_FUNC;
270 ACTION_RECURSE = (1 << 0),
271 ACTION_FOLLOWLINKS = (1 << 1),
272 ACTION_FOLLOWLINKS_L0 = (1 << 2),
273 ACTION_DEPTHFIRST = (1 << 3),
274 /*ACTION_REVERSE = (1 << 4), - unused */
275 ACTION_QUIET = (1 << 5),
277 extern int recursive_action(const char *fileName, unsigned flags,
278 int FAST_FUNC (*fileAction)(const char *fileName, struct stat* statbuf, void* userData, int depth),
279 int FAST_FUNC (*dirAction)(const char *fileName, struct stat* statbuf, void* userData, int depth),
280 void* userData, unsigned depth) FAST_FUNC;
281 extern int device_open(const char *device, int mode) FAST_FUNC;
282 enum { GETPTY_BUFSIZE = 16 }; /* more than enough for "/dev/ttyXXX" */
283 extern int xgetpty(char *line) FAST_FUNC;
284 extern int get_console_fd_or_die(void) FAST_FUNC;
285 extern void console_make_active(int fd, const int vt_num) FAST_FUNC;
286 extern char *find_block_device(const char *path) FAST_FUNC;
287 /* bb_copyfd_XX print read/write errors and return -1 if they occur */
288 extern off_t bb_copyfd_eof(int fd1, int fd2) FAST_FUNC;
289 extern off_t bb_copyfd_size(int fd1, int fd2, off_t size) FAST_FUNC;
290 extern void bb_copyfd_exact_size(int fd1, int fd2, off_t size) FAST_FUNC;
291 /* "short" copy can be detected by return value < size */
292 /* this helper yells "short read!" if param is not -1 */
293 extern void complain_copyfd_and_die(off_t sz) NORETURN FAST_FUNC;
294 extern char bb_process_escape_sequence(const char **ptr) FAST_FUNC;
295 /* xxxx_strip version can modify its parameter:
299 * "abc/def/" -> "def" !!
301 extern char *bb_get_last_path_component_strip(char *path) FAST_FUNC;
302 /* "abc/def/" -> "" and it never modifies 'path' */
303 extern char *bb_get_last_path_component_nostrip(const char *path) FAST_FUNC;
305 int ndelay_on(int fd) FAST_FUNC;
306 int ndelay_off(int fd) FAST_FUNC;
307 int close_on_exec_on(int fd) FAST_FUNC;
308 void xdup2(int, int) FAST_FUNC;
309 void xmove_fd(int, int) FAST_FUNC;
312 DIR *xopendir(const char *path) FAST_FUNC;
313 DIR *warn_opendir(const char *path) FAST_FUNC;
315 /* UNUSED: char *xmalloc_realpath(const char *path) FAST_FUNC; */
316 char *xmalloc_readlink(const char *path) FAST_FUNC;
317 char *xmalloc_readlink_or_warn(const char *path) FAST_FUNC;
318 char *xrealloc_getcwd_or_warn(char *cwd) FAST_FUNC;
320 char *xmalloc_follow_symlinks(const char *path) FAST_FUNC;
324 /* bb_signals(BB_FATAL_SIGS, handler) catches all signals which
325 * otherwise would kill us, except for those resulting from bugs:
326 * SIGSEGV, SIGILL, SIGFPE.
327 * Other fatal signals not included (TODO?):
328 * SIGBUS Bus error (bad memory access)
329 * SIGPOLL Pollable event. Synonym of SIGIO
330 * SIGPROF Profiling timer expired
331 * SIGSYS Bad argument to routine
332 * SIGTRAP Trace/breakpoint trap
334 * The only known arch with some of these sigs not fitting
335 * into 32 bits is parisc (SIGXCPU=33, SIGXFSZ=34, SIGSTKFLT=36).
336 * Dance around with long long to guard against that...
338 BB_FATAL_SIGS = (int)(0
342 + (1LL << SIGPIPE) // Write to pipe with no readers
343 + (1LL << SIGQUIT) // Quit from keyboard
344 + (1LL << SIGABRT) // Abort signal from abort(3)
345 + (1LL << SIGALRM) // Timer signal from alarm(2)
346 + (1LL << SIGVTALRM) // Virtual alarm clock
347 + (1LL << SIGXCPU) // CPU time limit exceeded
348 + (1LL << SIGXFSZ) // File size limit exceeded
349 + (1LL << SIGUSR1) // Yes kids, these are also fatal!
353 void bb_signals(int sigs, void (*f)(int)) FAST_FUNC;
354 /* Unlike signal() and bb_signals, sets handler with sigaction()
355 * and in a way that while signal handler is run, no other signals
356 * will be blocked: */
357 void bb_signals_recursive(int sigs, void (*f)(int)) FAST_FUNC;
358 /* syscalls like read() will be interrupted with EINTR: */
359 void signal_no_SA_RESTART_empty_mask(int sig, void (*handler)(int)) FAST_FUNC;
360 /* syscalls like read() won't be interrupted (though select/poll will be): */
361 void signal_SA_RESTART_empty_mask(int sig, void (*handler)(int)) FAST_FUNC;
362 void wait_for_any_sig(void) FAST_FUNC;
363 void kill_myself_with_sig(int sig) NORETURN FAST_FUNC;
364 void sig_block(int sig) FAST_FUNC;
365 void sig_unblock(int sig) FAST_FUNC;
366 /* Will do sigaction(signum, act, NULL): */
367 int sigaction_set(int sig, const struct sigaction *act) FAST_FUNC;
368 /* SIG_BLOCK/SIG_UNBLOCK all signals: */
369 int sigprocmask_allsigs(int how) FAST_FUNC;
370 /* Standard handler which just records signo */
371 extern smallint bb_got_signal;
372 void record_signo(int signo); /* not FAST_FUNC! */
375 void xsetgid(gid_t gid) FAST_FUNC;
376 void xsetuid(uid_t uid) FAST_FUNC;
377 void xchdir(const char *path) FAST_FUNC;
378 void xchroot(const char *path) FAST_FUNC;
379 void xsetenv(const char *key, const char *value) FAST_FUNC;
380 void xunlink(const char *pathname) FAST_FUNC;
381 void xstat(const char *pathname, struct stat *buf) FAST_FUNC;
382 int xopen(const char *pathname, int flags) FAST_FUNC FAST_FUNC;
383 int xopen3(const char *pathname, int flags, int mode) FAST_FUNC;
384 int open_or_warn(const char *pathname, int flags) FAST_FUNC;
385 int open3_or_warn(const char *pathname, int flags, int mode) FAST_FUNC;
386 int open_or_warn_stdin(const char *pathname) FAST_FUNC;
387 void xrename(const char *oldpath, const char *newpath) FAST_FUNC;
388 int rename_or_warn(const char *oldpath, const char *newpath) FAST_FUNC;
389 off_t xlseek(int fd, off_t offset, int whence) FAST_FUNC;
390 off_t fdlength(int fd) FAST_FUNC;
392 void xpipe(int filedes[2]) FAST_FUNC;
393 /* In this form code with pipes is much more readable */
394 struct fd_pair { int rd; int wr; };
395 #define piped_pair(pair) pipe(&((pair).rd))
396 #define xpiped_pair(pair) xpipe(&((pair).rd))
398 /* Useful for having small structure members/global variables */
399 typedef int8_t socktype_t;
400 typedef int8_t family_t;
401 struct BUG_too_small {
402 char BUG_socktype_t_too_small[(0
409 char BUG_family_t_too_small[(0
426 int xsocket(int domain, int type, int protocol) FAST_FUNC;
427 void xbind(int sockfd, struct sockaddr *my_addr, socklen_t addrlen) FAST_FUNC;
428 void xlisten(int s, int backlog) FAST_FUNC;
429 void xconnect(int s, const struct sockaddr *s_addr, socklen_t addrlen) FAST_FUNC;
430 ssize_t xsendto(int s, const void *buf, size_t len, const struct sockaddr *to,
431 socklen_t tolen) FAST_FUNC;
432 /* SO_REUSEADDR allows a server to rebind to an address that is already
433 * "in use" by old connections to e.g. previous server instance which is
434 * killed or crashed. Without it bind will fail until all such connections
435 * time out. Linux does not allow multiple live binds on same ip:port
436 * regardless of SO_REUSEADDR (unlike some other flavors of Unix).
437 * Turn it on before you call bind(). */
438 void setsockopt_reuseaddr(int fd) FAST_FUNC; /* On Linux this never fails. */
439 int setsockopt_broadcast(int fd) FAST_FUNC;
440 /* NB: returns port in host byte order */
441 unsigned bb_lookup_port(const char *port, const char *protocol, unsigned default_port) FAST_FUNC;
442 typedef struct len_and_sockaddr {
446 struct sockaddr_in sin;
447 #if ENABLE_FEATURE_IPV6
448 struct sockaddr_in6 sin6;
453 LSA_LEN_SIZE = offsetof(len_and_sockaddr, u),
454 LSA_SIZEOF_SA = sizeof(
457 struct sockaddr_in sin;
458 #if ENABLE_FEATURE_IPV6
459 struct sockaddr_in6 sin6;
464 /* Create stream socket, and allocate suitable lsa.
465 * (lsa of correct size and lsa->sa.sa_family (AF_INET/AF_INET6))
466 * af == AF_UNSPEC will result in trying to create IPv6 socket,
467 * and if kernel doesn't support it, IPv4.
469 #if ENABLE_FEATURE_IPV6
470 int xsocket_type(len_and_sockaddr **lsap, int af, int sock_type) FAST_FUNC;
472 int xsocket_type(len_and_sockaddr **lsap, int sock_type) FAST_FUNC;
473 #define xsocket_type(lsap, af, sock_type) xsocket_type((lsap), (sock_type))
475 int xsocket_stream(len_and_sockaddr **lsap) FAST_FUNC;
476 /* Create server socket bound to bindaddr:port. bindaddr can be NULL,
477 * numeric IP ("N.N.N.N") or numeric IPv6 address,
478 * and can have ":PORT" suffix (for IPv6 use "[X:X:...:X]:PORT").
479 * Only if there is no suffix, port argument is used */
480 /* NB: these set SO_REUSEADDR before bind */
481 int create_and_bind_stream_or_die(const char *bindaddr, int port) FAST_FUNC;
482 int create_and_bind_dgram_or_die(const char *bindaddr, int port) FAST_FUNC;
483 /* Create client TCP socket connected to peer:port. Peer cannot be NULL.
484 * Peer can be numeric IP ("N.N.N.N"), numeric IPv6 address or hostname,
485 * and can have ":PORT" suffix (for IPv6 use "[X:X:...:X]:PORT").
486 * If there is no suffix, port argument is used */
487 int create_and_connect_stream_or_die(const char *peer, int port) FAST_FUNC;
488 /* Connect to peer identified by lsa */
489 int xconnect_stream(const len_and_sockaddr *lsa) FAST_FUNC;
490 /* Return malloc'ed len_and_sockaddr with socket address of host:port
491 * Currently will return IPv4 or IPv6 sockaddrs only
492 * (depending on host), but in theory nothing prevents e.g.
493 * UNIX socket address being returned, IPX sockaddr etc...
494 * On error does bb_error_msg and returns NULL */
495 len_and_sockaddr* host2sockaddr(const char *host, int port) FAST_FUNC;
496 /* Version which dies on error */
497 len_and_sockaddr* xhost2sockaddr(const char *host, int port) FAST_FUNC;
498 len_and_sockaddr* xdotted2sockaddr(const char *host, int port) FAST_FUNC;
499 /* Same, useful if you want to force family (e.g. IPv6) */
500 #if !ENABLE_FEATURE_IPV6
501 #define host_and_af2sockaddr(host, port, af) host2sockaddr((host), (port))
502 #define xhost_and_af2sockaddr(host, port, af) xhost2sockaddr((host), (port))
504 len_and_sockaddr* host_and_af2sockaddr(const char *host, int port, sa_family_t af) FAST_FUNC;
505 len_and_sockaddr* xhost_and_af2sockaddr(const char *host, int port, sa_family_t af) FAST_FUNC;
507 /* Assign sin[6]_port member if the socket is an AF_INET[6] one,
508 * otherwise no-op. Useful for ftp.
509 * NB: does NOT do htons() internally, just direct assignment. */
510 void set_nport(len_and_sockaddr *lsa, unsigned port) FAST_FUNC;
511 /* Retrieve sin[6]_port or return -1 for non-INET[6] lsa's */
512 int get_nport(const struct sockaddr *sa) FAST_FUNC;
513 /* Reverse DNS. Returns NULL on failure. */
514 char* xmalloc_sockaddr2host(const struct sockaddr *sa) FAST_FUNC;
515 /* This one doesn't append :PORTNUM */
516 char* xmalloc_sockaddr2host_noport(const struct sockaddr *sa) FAST_FUNC;
517 /* This one also doesn't fall back to dotted IP (returns NULL) */
518 char* xmalloc_sockaddr2hostonly_noport(const struct sockaddr *sa) FAST_FUNC;
519 /* inet_[ap]ton on steroids */
520 char* xmalloc_sockaddr2dotted(const struct sockaddr *sa) FAST_FUNC;
521 char* xmalloc_sockaddr2dotted_noport(const struct sockaddr *sa) FAST_FUNC;
522 // "old" (ipv4 only) API
523 // users: traceroute.c hostname.c - use _list_ of all IPs
524 struct hostent *xgethostbyname(const char *name) FAST_FUNC;
525 // Also mount.c and inetd.c are using gethostbyname(),
526 // + inet_common.c has additional IPv4-only stuff
529 void socket_want_pktinfo(int fd) FAST_FUNC;
530 ssize_t send_to_from(int fd, void *buf, size_t len, int flags,
531 const struct sockaddr *to,
532 const struct sockaddr *from,
533 socklen_t tolen) FAST_FUNC;
534 ssize_t recv_from_to(int fd, void *buf, size_t len, int flags,
535 struct sockaddr *from,
537 socklen_t sa_size) FAST_FUNC;
539 char *xstrdup(const char *s) FAST_FUNC;
540 char *xstrndup(const char *s, int n) FAST_FUNC;
541 void overlapping_strcpy(char *dst, const char *src) FAST_FUNC;
542 char *safe_strncpy(char *dst, const char *src, size_t size) FAST_FUNC;
543 /* Guaranteed to NOT be a macro (smallest code). Saves nearly 2k on uclibc.
544 * But potentially slow, don't use in one-billion-times loops */
545 int bb_putchar(int ch) FAST_FUNC;
546 char *xasprintf(const char *format, ...) __attribute__ ((format (printf, 1, 2))) FAST_FUNC;
547 /* Prints unprintable chars ch as ^C or M-c to file
548 * (M-c is used only if ch is ORed with PRINTABLE_META),
549 * else it is printed as-is (except for ch = 0x9b) */
550 enum { PRINTABLE_META = 0x100 };
551 void fputc_printable(int ch, FILE *file) FAST_FUNC;
552 // gcc-4.1.1 still isn't good enough at optimizing it
553 // (+200 bytes compared to macro)
554 //static ALWAYS_INLINE
555 //int LONE_DASH(const char *s) { return s[0] == '-' && !s[1]; }
556 //static ALWAYS_INLINE
557 //int NOT_LONE_DASH(const char *s) { return s[0] != '-' || s[1]; }
558 #define LONE_DASH(s) ((s)[0] == '-' && !(s)[1])
559 #define NOT_LONE_DASH(s) ((s)[0] != '-' || (s)[1])
560 #define LONE_CHAR(s,c) ((s)[0] == (c) && !(s)[1])
561 #define NOT_LONE_CHAR(s,c) ((s)[0] != (c) || (s)[1])
562 #define DOT_OR_DOTDOT(s) ((s)[0] == '.' && (!(s)[1] || ((s)[1] == '.' && !(s)[2])))
564 /* dmalloc will redefine these to it's own implementation. It is safe
565 * to have the prototypes here unconditionally. */
566 void *malloc_or_warn(size_t size) FAST_FUNC;
567 void *xmalloc(size_t size) FAST_FUNC;
568 void *xzalloc(size_t size) FAST_FUNC;
569 void *xrealloc(void *old, size_t size) FAST_FUNC;
570 /* After xrealloc_vector(v, 4, idx) it's ok to use
571 * at least v[idx] and v[idx+1], for all idx values.
572 * shift specifies how many new elements are added (1: 2, 2: 4... 8: 256...)
573 * when all elements are used up. New elements are zeroed out. */
574 #define xrealloc_vector(vector, shift, idx) \
575 xrealloc_vector_helper((vector), (sizeof((vector)[0]) << 8) + (shift), (idx))
576 void* xrealloc_vector_helper(void *vector, unsigned sizeof_and_shift, int idx) FAST_FUNC;
579 extern ssize_t safe_read(int fd, void *buf, size_t count) FAST_FUNC;
580 extern ssize_t nonblock_safe_read(int fd, void *buf, size_t count) FAST_FUNC;
581 // NB: will return short read on error, not -1,
582 // if some data was read before error occurred
583 extern ssize_t full_read(int fd, void *buf, size_t count) FAST_FUNC;
584 extern void xread(int fd, void *buf, size_t count) FAST_FUNC;
585 extern unsigned char xread_char(int fd) FAST_FUNC;
586 extern ssize_t read_close(int fd, void *buf, size_t maxsz) FAST_FUNC;
587 extern ssize_t open_read_close(const char *filename, void *buf, size_t maxsz) FAST_FUNC;
588 // Reads one line a-la fgets (but doesn't save terminating '\n').
589 // Reads byte-by-byte. Useful when it is important to not read ahead.
590 // Bytes are appended to pfx (which must be malloced, or NULL).
591 extern char *xmalloc_reads(int fd, char *pfx, size_t *maxsz_p) FAST_FUNC;
592 /* Reads block up to *maxsz_p (default: MAX_INT(ssize_t)) */
593 extern void *xmalloc_read(int fd, size_t *maxsz_p) FAST_FUNC;
594 /* Returns NULL if file can't be opened */
595 extern void *xmalloc_open_read_close(const char *filename, size_t *maxsz_p) FAST_FUNC;
596 /* Autodetects .gz etc */
597 extern int open_zipped(const char *fname) FAST_FUNC;
598 extern void *xmalloc_open_zipped_read_close(const char *fname, size_t *maxsz_p) FAST_FUNC;
599 /* Never returns NULL */
600 extern void *xmalloc_xopen_read_close(const char *filename, size_t *maxsz_p) FAST_FUNC;
602 extern ssize_t safe_write(int fd, const void *buf, size_t count) FAST_FUNC;
603 // NB: will return short write on error, not -1,
604 // if some data was written before error occurred
605 extern ssize_t full_write(int fd, const void *buf, size_t count) FAST_FUNC;
606 extern void xwrite(int fd, const void *buf, size_t count) FAST_FUNC;
607 extern void xopen_xwrite_close(const char* file, const char *str) FAST_FUNC;
609 /* Reads and prints to stdout till eof, then closes FILE. Exits on error: */
610 extern void xprint_and_close_file(FILE *file) FAST_FUNC;
612 extern char *bb_get_chunk_from_file(FILE *file, int *end) FAST_FUNC;
613 extern char *bb_get_chunk_with_continuation(FILE *file, int *end, int *lineno) FAST_FUNC;
614 /* Reads up to (and including) TERMINATING_STRING: */
615 extern char *xmalloc_fgets_str(FILE *file, const char *terminating_string) FAST_FUNC;
616 /* Chops off TERMINATING_STRING from the end: */
617 extern char *xmalloc_fgetline_str(FILE *file, const char *terminating_string) FAST_FUNC;
618 /* Reads up to (and including) "\n" or NUL byte: */
619 extern char *xmalloc_fgets(FILE *file) FAST_FUNC;
620 /* Chops off '\n' from the end, unlike fgets: */
621 extern char *xmalloc_fgetline(FILE *file) FAST_FUNC;
622 /* Same, but doesn't try to conserve space (may have some slack after the end) */
623 /* extern char *xmalloc_fgetline_fast(FILE *file) FAST_FUNC; */
625 extern void die_if_ferror(FILE *file, const char *msg) FAST_FUNC;
626 extern void die_if_ferror_stdout(void) FAST_FUNC;
627 extern void xfflush_stdout(void) FAST_FUNC;
628 extern void fflush_stdout_and_exit(int retval) NORETURN FAST_FUNC;
629 extern int fclose_if_not_stdin(FILE *file) FAST_FUNC;
630 extern FILE *xfopen(const char *filename, const char *mode) FAST_FUNC;
631 /* Prints warning to stderr and returns NULL on failure: */
632 extern FILE *fopen_or_warn(const char *filename, const char *mode) FAST_FUNC;
633 /* "Opens" stdin if filename is special, else just opens file: */
634 extern FILE *xfopen_stdin(const char *filename) FAST_FUNC;
635 extern FILE *fopen_or_warn_stdin(const char *filename) FAST_FUNC;
636 extern FILE* fopen_for_read(const char *path) FAST_FUNC;
637 extern FILE* xfopen_for_read(const char *path) FAST_FUNC;
638 extern FILE* fopen_for_write(const char *path) FAST_FUNC;
639 extern FILE* xfopen_for_write(const char *path) FAST_FUNC;
641 int bb_pstrcmp(const void *a, const void *b) /* not FAST_FUNC! */;
642 void qsort_string_vector(char **sv, unsigned count) FAST_FUNC;
644 /* Wrapper which restarts poll on EINTR or ENOMEM.
645 * On other errors complains [perror("poll")] and returns.
646 * Warning! May take (much) longer than timeout_ms to return!
647 * If this is a problem, use bare poll and open-code EINTR/ENOMEM handling */
648 int safe_poll(struct pollfd *ufds, nfds_t nfds, int timeout_ms) FAST_FUNC;
650 char *safe_gethostname(void) FAST_FUNC;
651 char *safe_getdomainname(void) FAST_FUNC;
653 /* Convert each alpha char in str to lower-case */
654 char* str_tolower(char *str) FAST_FUNC;
656 char *utoa(unsigned n) FAST_FUNC;
657 char *itoa(int n) FAST_FUNC;
658 /* Returns a pointer past the formatted number, does NOT null-terminate */
659 char *utoa_to_buf(unsigned n, char *buf, unsigned buflen) FAST_FUNC;
660 char *itoa_to_buf(int n, char *buf, unsigned buflen) FAST_FUNC;
661 /* Intelligent formatters of bignums */
662 void smart_ulltoa4(unsigned long long ul, char buf[5], const char *scale) FAST_FUNC;
663 void smart_ulltoa5(unsigned long long ul, char buf[5], const char *scale) FAST_FUNC;
664 //TODO: provide pointer to buf (avoid statics)?
665 const char *make_human_readable_str(unsigned long long size,
666 unsigned long block_size, unsigned long display_unit) FAST_FUNC;
667 /* Put a string of hex bytes ("1b2e66fe"...), return advanced pointer */
668 char *bin2hex(char *buf, const char *cp, int count) FAST_FUNC;
670 /* Last element is marked by mult == 0 */
677 /* Using xatoi() instead of naive atoi() is not always convenient -
678 * in many places people want *non-negative* values, but store them
679 * in signed int. Therefore we need this one:
680 * dies if input is not in [0, INT_MAX] range. Also will reject '-0' etc */
681 int xatoi_u(const char *numstr) FAST_FUNC;
682 /* Useful for reading port numbers */
683 uint16_t xatou16(const char *numstr) FAST_FUNC;
686 /* These parse entries in /etc/passwd and /etc/group. This is desirable
687 * for BusyBox since we want to avoid using the glibc NSS stuff, which
688 * increases target size and is often not needed on embedded systems. */
689 long xuname2uid(const char *name) FAST_FUNC;
690 long xgroup2gid(const char *name) FAST_FUNC;
691 /* wrapper: allows string to contain numeric uid or gid */
692 unsigned long get_ug_id(const char *s, long FAST_FUNC (*xname2id)(const char *)) FAST_FUNC;
693 /* from chpst. Does not die, returns 0 on failure */
698 /* always sets uid and gid */
699 int get_uidgid(struct bb_uidgid_t*, const char*, int numeric_ok) FAST_FUNC;
700 /* always sets uid and gid, allows numeric; exits on failure */
701 void xget_uidgid(struct bb_uidgid_t*, const char*) FAST_FUNC;
702 /* chown-like handling of "user[:[group]" */
703 void parse_chown_usergroup_or_die(struct bb_uidgid_t *u, char *user_group) FAST_FUNC;
704 /* bb_getpwuid, bb_getgrgid:
705 * bb_getXXXid(buf, bufsz, id) - copy user/group name or id
706 * as a string to buf, return user/group name or NULL
707 * bb_getXXXid(NULL, 0, id) - return user/group name or NULL
708 * bb_getXXXid(NULL, -1, id) - return user/group name or exit
710 char *bb_getpwuid(char *name, int bufsize, long uid) FAST_FUNC;
711 char *bb_getgrgid(char *group, int bufsize, long gid) FAST_FUNC;
712 /* versions which cache results (useful for ps, ls etc) */
713 const char* get_cached_username(uid_t uid) FAST_FUNC;
714 const char* get_cached_groupname(gid_t gid) FAST_FUNC;
715 void clear_username_cache(void) FAST_FUNC;
716 /* internally usernames are saved in fixed-sized char[] buffers */
717 enum { USERNAME_MAX_SIZE = 16 - sizeof(int) };
718 #if ENABLE_FEATURE_CHECK_NAMES
719 void die_if_bad_username(const char* name) FAST_FUNC;
721 #define die_if_bad_username(name) ((void)(name))
724 int execable_file(const char *name) FAST_FUNC;
725 char *find_execable(const char *filename, char **PATHp) FAST_FUNC;
726 int exists_execable(const char *filename) FAST_FUNC;
728 /* BB_EXECxx always execs (it's not doing NOFORK/NOEXEC stuff),
729 * but it may exec busybox and call applet instead of searching PATH.
731 #if ENABLE_FEATURE_PREFER_APPLETS
732 int bb_execvp(const char *file, char *const argv[]) FAST_FUNC;
733 #define BB_EXECVP(prog,cmd) bb_execvp(prog,cmd)
734 #define BB_EXECLP(prog,cmd,...) \
735 execlp((find_applet_by_name(prog) >= 0) ? CONFIG_BUSYBOX_EXEC_PATH : prog, \
738 #define BB_EXECVP(prog,cmd) execvp(prog,cmd)
739 #define BB_EXECLP(prog,cmd,...) execlp(prog,cmd, __VA_ARGS__)
742 /* NOMMU friendy fork+exec */
743 pid_t spawn(char **argv) FAST_FUNC;
744 pid_t xspawn(char **argv) FAST_FUNC;
746 int safe_waitpid(int pid, int *wstat, int options) FAST_FUNC;
747 /* Unlike waitpid, waits ONLY for one process.
748 * It's safe to pass negative 'pids' from failed [v]fork -
749 * wait4pid will return -1 (and will not clobber [v]fork's errno).
750 * IOW: rc = wait4pid(spawn(argv));
751 * if (rc < 0) bb_perror_msg("%s", argv[0]);
752 * if (rc > 0) bb_error_msg("exit code: %d", rc);
754 int wait4pid(int pid) FAST_FUNC;
755 int wait_any_nohang(int *wstat) FAST_FUNC;
756 #define wait_crashed(w) ((w) & 127)
757 #define wait_exitcode(w) ((w) >> 8)
758 #define wait_stopsig(w) ((w) >> 8)
759 #define wait_stopped(w) (((w) & 127) == 127)
760 /* wait4pid(spawn(argv)) + NOFORK/NOEXEC (if configured) */
761 int spawn_and_wait(char **argv) FAST_FUNC;
762 struct nofork_save_area {
764 const char *applet_name;
765 int xfunc_error_retval;
766 uint32_t option_mask32;
770 void save_nofork_data(struct nofork_save_area *save) FAST_FUNC;
771 void restore_nofork_data(struct nofork_save_area *save) FAST_FUNC;
772 /* Does NOT check that applet is NOFORK, just blindly runs it */
773 int run_nofork_applet(int applet_no, char **argv) FAST_FUNC;
774 int run_nofork_applet_prime(struct nofork_save_area *old, int applet_no, char **argv) FAST_FUNC;
776 /* Helpers for daemonization.
778 * bb_daemonize(flags) = daemonize, does not compile on NOMMU
780 * bb_daemonize_or_rexec(flags, argv) = daemonizes on MMU (and ignores argv),
781 * rexec's itself on NOMMU with argv passed as command line.
782 * Thus bb_daemonize_or_rexec may cause your <applet>_main() to be re-executed
783 * from the start. (It will detect it and not reexec again second time).
784 * You have to audit carefully that you don't do something twice as a result
785 * (opening files/sockets, parsing config files etc...)!
787 * Both of the above will redirect fd 0,1,2 to /dev/null and drop ctty
788 * (will do setsid()).
790 * forkexit_or_rexec(argv) = bare-bones "fork + parent exits" on MMU,
791 * "vfork + re-exec ourself" on NOMMU. No fd redirection, no setsid().
792 * Currently used for openvt and setsid. On MMU ignores argv.
794 * Helper for network daemons in foreground mode:
796 * bb_sanitize_stdio() = make sure that fd 0,1,2 are opened by opening them
797 * to /dev/null if they are not.
800 DAEMON_CHDIR_ROOT = 1,
801 DAEMON_DEVNULL_STDIO = 2,
802 DAEMON_CLOSE_EXTRA_FDS = 4,
803 DAEMON_ONLY_SANITIZE = 8, /* internal use */
806 void forkexit_or_rexec(void) FAST_FUNC;
807 enum { re_execed = 0 };
808 # define forkexit_or_rexec(argv) forkexit_or_rexec()
809 # define bb_daemonize_or_rexec(flags, argv) bb_daemonize_or_rexec(flags)
810 # define bb_daemonize(flags) bb_daemonize_or_rexec(flags, bogus)
812 void re_exec(char **argv) NORETURN FAST_FUNC;
813 void forkexit_or_rexec(char **argv) FAST_FUNC;
814 extern bool re_execed;
815 int BUG_fork_is_unavailable_on_nommu(void) FAST_FUNC;
816 int BUG_daemon_is_unavailable_on_nommu(void) FAST_FUNC;
817 void BUG_bb_daemonize_is_unavailable_on_nommu(void) FAST_FUNC;
818 # define fork() BUG_fork_is_unavailable_on_nommu()
819 # define daemon(a,b) BUG_daemon_is_unavailable_on_nommu()
820 # define bb_daemonize(a) BUG_bb_daemonize_is_unavailable_on_nommu()
822 void bb_daemonize_or_rexec(int flags, char **argv) FAST_FUNC;
823 void bb_sanitize_stdio(void) FAST_FUNC;
824 /* Clear dangerous stuff, set PATH. Return 1 if was run by different user. */
825 int sanitize_env_if_suid(void) FAST_FUNC;
828 extern const char *const bb_argv_dash[]; /* "-", NULL */
829 extern const char *opt_complementary;
830 #if ENABLE_GETOPT_LONG
831 #define No_argument "\0"
832 #define Required_argument "\001"
833 #define Optional_argument "\002"
834 extern const char *applet_long_options;
836 extern uint32_t option_mask32;
837 extern uint32_t getopt32(char **argv, const char *applet_opts, ...) FAST_FUNC;
840 typedef struct llist_t {
842 struct llist_t *link;
844 void llist_add_to(llist_t **old_head, void *data) FAST_FUNC;
845 void llist_add_to_end(llist_t **list_head, void *data) FAST_FUNC;
846 void *llist_pop(llist_t **elm) FAST_FUNC;
847 void llist_unlink(llist_t **head, llist_t *elm) FAST_FUNC;
848 void llist_free(llist_t *elm, void (*freeit)(void *data)) FAST_FUNC;
849 llist_t *llist_rev(llist_t *list) FAST_FUNC;
850 /* BTW, surprisingly, changing API to
851 * llist_t *llist_add_to(llist_t *old_head, void *data)
852 * etc does not result in smaller code... */
854 /* start_stop_daemon and udhcpc are special - they want
855 * to create pidfiles regardless of FEATURE_PIDFILE */
856 #if ENABLE_FEATURE_PIDFILE || defined(WANT_PIDFILE)
857 /* True only if we created pidfile which is *file*, not /dev/null etc */
858 extern smallint wrote_pidfile;
859 void write_pidfile(const char *path) FAST_FUNC;
860 #define remove_pidfile(path) do { if (wrote_pidfile) unlink(path); } while (0)
862 enum { wrote_pidfile = 0 };
863 #define write_pidfile(path) ((void)0)
864 #define remove_pidfile(path) ((void)0)
869 LOGMODE_STDIO = (1 << 0),
870 LOGMODE_SYSLOG = (1 << 1) * ENABLE_FEATURE_SYSLOG,
871 LOGMODE_BOTH = LOGMODE_SYSLOG + LOGMODE_STDIO,
873 extern const char *msg_eol;
874 extern smallint logmode;
875 extern int die_sleep;
876 extern int xfunc_error_retval;
877 extern jmp_buf die_jmp;
878 extern void xfunc_die(void) NORETURN FAST_FUNC;
879 extern void bb_show_usage(void) NORETURN FAST_FUNC;
880 extern void bb_error_msg(const char *s, ...) __attribute__ ((format (printf, 1, 2))) FAST_FUNC;
881 extern void bb_error_msg_and_die(const char *s, ...) __attribute__ ((noreturn, format (printf, 1, 2))) FAST_FUNC;
882 extern void bb_perror_msg(const char *s, ...) __attribute__ ((format (printf, 1, 2))) FAST_FUNC;
883 extern void bb_simple_perror_msg(const char *s) FAST_FUNC;
884 extern void bb_perror_msg_and_die(const char *s, ...) __attribute__ ((noreturn, format (printf, 1, 2))) FAST_FUNC;
885 extern void bb_simple_perror_msg_and_die(const char *s) __attribute__ ((noreturn)) FAST_FUNC;
886 extern void bb_herror_msg(const char *s, ...) __attribute__ ((format (printf, 1, 2))) FAST_FUNC;
887 extern void bb_herror_msg_and_die(const char *s, ...) __attribute__ ((noreturn, format (printf, 1, 2))) FAST_FUNC;
888 extern void bb_perror_nomsg_and_die(void) NORETURN FAST_FUNC;
889 extern void bb_perror_nomsg(void) FAST_FUNC;
890 extern void bb_info_msg(const char *s, ...) __attribute__ ((format (printf, 1, 2))) FAST_FUNC;
891 extern void bb_verror_msg(const char *s, va_list p, const char *strerr) FAST_FUNC;
893 /* We need to export XXX_main from libbusybox
894 * only if we build "individual" binaries
896 #if ENABLE_FEATURE_INDIVIDUAL
897 #define MAIN_EXTERNALLY_VISIBLE EXTERNALLY_VISIBLE
899 #define MAIN_EXTERNALLY_VISIBLE
903 /* Applets which are useful from another applets */
904 int bb_cat(char** argv);
905 /* If shell needs them, they exist even if not enabled as applets */
906 int echo_main(int argc, char** argv) USE_ECHO(MAIN_EXTERNALLY_VISIBLE);
907 int printf_main(int argc, char **argv) USE_PRINTF(MAIN_EXTERNALLY_VISIBLE);
908 int test_main(int argc, char **argv) USE_TEST(MAIN_EXTERNALLY_VISIBLE);
909 int kill_main(int argc, char **argv) USE_KILL(MAIN_EXTERNALLY_VISIBLE);
910 /* Similar, but used by chgrp, not shell */
911 int chown_main(int argc, char **argv) USE_CHOWN(MAIN_EXTERNALLY_VISIBLE);
912 /* Don't need USE_xxx() guard for these */
913 int gunzip_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
914 int bunzip2_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
917 void bb_displayroutes(int noresolve, int netstatfmt) FAST_FUNC;
921 /* "Keycodes" that report an escape sequence.
922 * We use something which fits into signed char,
923 * yet doesn't represent any valid Unicode characher.
924 * Also, -1 is reserved for error indication and we don't use it. */
934 KEYCODE_PAGEUP = -10,
935 KEYCODE_PAGEDOWN = -11,
950 /* How long the longest ESC sequence we know? */
951 KEYCODE_BUFFER_SIZE = 4
953 int read_key(int fd, smalluint *nbuffered, char *buffer) FAST_FUNC;
957 int create_icmp_socket(void) FAST_FUNC;
958 int create_icmp6_socket(void) FAST_FUNC;
960 /* This structure defines protocol families and their handlers. */
966 char* FAST_FUNC (*print)(unsigned char *);
967 const char* FAST_FUNC (*sprint)(struct sockaddr *, int numeric);
968 int FAST_FUNC (*input)(/*int type,*/ const char *bufp, struct sockaddr *);
969 void FAST_FUNC (*herror)(char *text);
970 int FAST_FUNC (*rprint)(int options);
971 int FAST_FUNC (*rinput)(int typ, int ext, char **argv);
973 int FAST_FUNC (*getmask)(char *src, struct sockaddr *mask, char *name);
975 /* This structure defines hardware protocols and their handlers. */
981 char* FAST_FUNC (*print)(unsigned char *);
982 int FAST_FUNC (*input)(const char *, struct sockaddr *);
983 int FAST_FUNC (*activate)(int fd);
984 int suppress_null_addr;
986 extern smallint interface_opt_a;
987 int display_interfaces(char *ifname) FAST_FUNC;
988 #if ENABLE_FEATURE_HWIB
989 int in_ib(const char *bufp, struct sockaddr *sap) FAST_FUNC;
991 #define in_ib(a, b) 1 /* fail */
993 const struct aftype *get_aftype(const char *name) FAST_FUNC;
994 const struct hwtype *get_hwtype(const char *name) FAST_FUNC;
995 const struct hwtype *get_hwntype(int type) FAST_FUNC;
998 #ifndef BUILD_INDIVIDUAL
999 extern int find_applet_by_name(const char *name) FAST_FUNC;
1000 /* Returns only if applet is not found. */
1001 extern void run_applet_and_exit(const char *name, char **argv) FAST_FUNC;
1002 extern void run_applet_no_and_exit(int a, char **argv) NORETURN FAST_FUNC;
1005 #ifdef HAVE_MNTENT_H
1006 extern int match_fstype(const struct mntent *mt, const char *fstypes) FAST_FUNC;
1007 extern struct mntent *find_mount_point(const char *name, const char *table) FAST_FUNC;
1009 extern void erase_mtab(const char * name) FAST_FUNC;
1010 extern unsigned int tty_baud_to_value(speed_t speed) FAST_FUNC;
1011 extern speed_t tty_value_to_baud(unsigned int value) FAST_FUNC;
1012 extern void bb_warn_ignoring_args(int n) FAST_FUNC;
1014 extern int get_linux_version_code(void) FAST_FUNC;
1016 extern char *query_loop(const char *device) FAST_FUNC;
1017 extern int del_loop(const char *device) FAST_FUNC;
1018 /* If *devname is not NULL, use that name, otherwise try to find free one,
1019 * malloc and return it in *devname.
1020 * return value: 1: read-only loopdev was setup, 0: rw, < 0: error */
1021 extern int set_loop(char **devname, const char *file, unsigned long long offset) FAST_FUNC;
1024 //TODO: pass buf pointer or return allocated buf (avoid statics)?
1025 char *bb_askpass(int timeout, const char * prompt) FAST_FUNC;
1026 int bb_ask_confirmation(void) FAST_FUNC;
1028 int bb_parse_mode(const char* s, mode_t* theMode) FAST_FUNC;
1031 * Config file parser
1034 PARSE_COLLAPSE = 0x00010000, // treat consecutive delimiters as one
1035 PARSE_TRIM = 0x00020000, // trim leading and trailing delimiters
1036 // TODO: COLLAPSE and TRIM seem to always go in pair
1037 PARSE_GREEDY = 0x00040000, // last token takes entire remainder of the line
1038 PARSE_MIN_DIE = 0x00100000, // die if < min tokens found
1039 // keep a copy of current line
1040 PARSE_KEEP_COPY = 0x00200000 * ENABLE_DEBUG_CROND_OPTION,
1041 // PARSE_ESCAPE = 0x00400000, // process escape sequences in tokens
1043 // * remove leading and trailing delimiters and collapse
1044 // multiple delimiters into one
1045 // * warn and continue if less than mintokens delimiters found
1046 // * grab everything into last token
1047 PARSE_NORMAL = PARSE_COLLAPSE | PARSE_TRIM | PARSE_GREEDY,
1049 typedef struct parser_t {
1055 parser_t* config_open(const char *filename) FAST_FUNC;
1056 parser_t* config_open2(const char *filename, FILE* FAST_FUNC (*fopen_func)(const char *path)) FAST_FUNC;
1057 int config_read(parser_t *parser, char **tokens, unsigned flags, const char *delims) FAST_FUNC;
1058 #define config_read(parser, tokens, max, min, str, flags) \
1059 config_read(parser, tokens, ((flags) | (((min) & 0xFF) << 8) | ((max) & 0xFF)), str)
1060 void config_close(parser_t *parser) FAST_FUNC;
1062 /* Concatenate path and filename to new allocated buffer.
1063 * Add "/" only as needed (no duplicate "//" are produced).
1064 * If path is NULL, it is assumed to be "/".
1065 * filename should not be NULL. */
1066 char *concat_path_file(const char *path, const char *filename) FAST_FUNC;
1067 char *concat_subpath_file(const char *path, const char *filename) FAST_FUNC;
1068 const char *bb_basename(const char *name) FAST_FUNC;
1069 /* NB: can violate const-ness (similarly to strchr) */
1070 char *last_char_is(const char *s, int c) FAST_FUNC;
1073 int bb_make_directory(char *path, long mode, int flags) FAST_FUNC;
1075 int get_signum(const char *name) FAST_FUNC;
1076 const char *get_signame(int number) FAST_FUNC;
1077 void print_signames(void) FAST_FUNC;
1079 char *bb_simplify_path(const char *path) FAST_FUNC;
1081 #define FAIL_DELAY 3
1082 extern void bb_do_delay(int seconds) FAST_FUNC;
1083 extern void change_identity(const struct passwd *pw) FAST_FUNC;
1084 extern void run_shell(const char *shell, int loginshell, const char *command, const char **additional_args) NORETURN FAST_FUNC;
1085 extern void run_shell(const char *shell, int loginshell, const char *command, const char **additional_args) FAST_FUNC;
1087 extern void renew_current_security_context(void) FAST_FUNC;
1088 extern void set_current_security_context(security_context_t sid) FAST_FUNC;
1089 extern context_t set_security_context_component(security_context_t cur_context,
1090 char *user, char *role, char *type, char *range) FAST_FUNC;
1091 extern void setfscreatecon_or_die(security_context_t scontext) FAST_FUNC;
1092 extern void selinux_preserve_fcontext(int fdesc) FAST_FUNC;
1094 #define selinux_preserve_fcontext(fdesc) ((void)0)
1096 extern void selinux_or_die(void) FAST_FUNC;
1097 extern int restricted_shell(const char *shell) FAST_FUNC;
1099 /* setup_environment:
1100 * if clear_env = 1: cd(pw->pw_dir), clear environment, then set
1102 * USER=pw->pw_name, LOGNAME=pw->pw_name
1103 * PATH=bb_default_[root_]path
1106 * else if change_env = 1:
1107 * if not root (if pw->pw_uid != 0):
1108 * USER=pw->pw_name, LOGNAME=pw->pw_name
1113 extern void setup_environment(const char *shell, int clear_env, int change_env, const struct passwd *pw) FAST_FUNC;
1114 extern int correct_password(const struct passwd *pw) FAST_FUNC;
1115 /* Returns a malloced string */
1116 #if !ENABLE_USE_BB_CRYPT
1117 #define pw_encrypt(clear, salt, cleanup) pw_encrypt(clear, salt)
1119 extern char *pw_encrypt(const char *clear, const char *salt, int cleanup) FAST_FUNC;
1120 extern int obscure(const char *old, const char *newval, const struct passwd *pwdp) FAST_FUNC;
1121 /* rnd is additional random input. New one is returned.
1122 * Useful if you call crypt_make_salt many times in a row:
1123 * rnd = crypt_make_salt(buf1, 4, 0);
1124 * rnd = crypt_make_salt(buf2, 4, rnd);
1125 * rnd = crypt_make_salt(buf3, 4, rnd);
1126 * (otherwise we risk having same salt generated)
1128 extern int crypt_make_salt(char *p, int cnt, int rnd) FAST_FUNC;
1129 /* Returns number of lines changed, or -1 on error */
1130 extern int update_passwd(const char *filename, const char *username,
1131 const char *new_pw) FAST_FUNC;
1133 int index_in_str_array(const char *const string_array[], const char *key) FAST_FUNC;
1134 int index_in_strings(const char *strings, const char *key) FAST_FUNC;
1135 int index_in_substr_array(const char *const string_array[], const char *key) FAST_FUNC;
1136 int index_in_substrings(const char *strings, const char *key) FAST_FUNC;
1137 const char *nth_string(const char *strings, int n) FAST_FUNC;
1139 extern void print_login_issue(const char *issue_file, const char *tty) FAST_FUNC;
1140 extern void print_login_prompt(void) FAST_FUNC;
1142 /* NB: typically you want to pass fd 0, not 1. Think 'applet | grep something' */
1143 int get_terminal_width_height(int fd, unsigned *width, unsigned *height) FAST_FUNC;
1145 int tcsetattr_stdin_TCSANOW(const struct termios *tp) FAST_FUNC;
1147 /* NB: "unsigned request" is crucial! "int request" will break some arches! */
1148 int ioctl_or_perror(int fd, unsigned request, void *argp, const char *fmt,...) __attribute__ ((format (printf, 4, 5))) FAST_FUNC;
1149 int ioctl_or_perror_and_die(int fd, unsigned request, void *argp, const char *fmt,...) __attribute__ ((format (printf, 4, 5))) FAST_FUNC;
1150 #if ENABLE_IOCTL_HEX2STR_ERROR
1151 int bb_ioctl_or_warn(int fd, unsigned request, void *argp, const char *ioctl_name) FAST_FUNC;
1152 int bb_xioctl(int fd, unsigned request, void *argp, const char *ioctl_name) FAST_FUNC;
1153 #define ioctl_or_warn(fd,request,argp) bb_ioctl_or_warn(fd,request,argp,#request)
1154 #define xioctl(fd,request,argp) bb_xioctl(fd,request,argp,#request)
1156 int bb_ioctl_or_warn(int fd, unsigned request, void *argp) FAST_FUNC;
1157 int bb_xioctl(int fd, unsigned request, void *argp) FAST_FUNC;
1158 #define ioctl_or_warn(fd,request,argp) bb_ioctl_or_warn(fd,request,argp)
1159 #define xioctl(fd,request,argp) bb_xioctl(fd,request,argp)
1162 char *is_in_ino_dev_hashtable(const struct stat *statbuf) FAST_FUNC;
1163 void add_to_ino_dev_hashtable(const struct stat *statbuf, const char *name) FAST_FUNC;
1164 void reset_ino_dev_hashtable(void) FAST_FUNC;
1166 /* At least glibc has horrendously large inline for this, so wrap it */
1167 unsigned long long bb_makedev(unsigned int major, unsigned int minor) FAST_FUNC;
1169 #define makedev(a,b) bb_makedev(a,b)
1173 #if ENABLE_FEATURE_EDITING
1174 /* It's NOT just ENABLEd or disabled. It's a number: */
1175 #ifdef CONFIG_FEATURE_EDITING_HISTORY
1176 #define MAX_HISTORY (CONFIG_FEATURE_EDITING_HISTORY + 0)
1178 #define MAX_HISTORY 0
1180 typedef struct line_input_t {
1182 const char *path_lookup;
1186 USE_FEATURE_EDITING_SAVEHISTORY(const char *hist_file;)
1187 char *history[MAX_HISTORY + 1];
1191 DO_HISTORY = 1 * (MAX_HISTORY > 0),
1192 SAVE_HISTORY = 2 * (MAX_HISTORY > 0) * ENABLE_FEATURE_EDITING_SAVEHISTORY,
1193 TAB_COMPLETION = 4 * ENABLE_FEATURE_TAB_COMPLETION,
1194 USERNAME_COMPLETION = 8 * ENABLE_FEATURE_USERNAME_COMPLETION,
1195 VI_MODE = 0x10 * ENABLE_FEATURE_EDITING_VI,
1196 WITH_PATH_LOOKUP = 0x20,
1197 FOR_SHELL = DO_HISTORY | SAVE_HISTORY | TAB_COMPLETION | USERNAME_COMPLETION,
1199 line_input_t *new_line_input_t(int flags) FAST_FUNC;
1201 * -1 on read errors or EOF, or on bare Ctrl-D,
1202 * 0 on ctrl-C (the line entered is still returned in 'command'),
1203 * >0 length of input string, including terminating '\n'
1205 int read_line_input(const char* prompt, char* command, int maxsize, line_input_t *state) FAST_FUNC;
1207 int read_line_input(const char* prompt, char* command, int maxsize) FAST_FUNC;
1208 #define read_line_input(prompt, command, maxsize, state) \
1209 read_line_input(prompt, command, maxsize)
1214 #ifdef TASK_COMM_LEN
1215 enum { COMM_LEN = TASK_COMM_LEN };
1217 /* synchronize with sizeof(task_struct.comm) in /usr/include/linux/sched.h */
1218 enum { COMM_LEN = 16 };
1221 typedef struct procps_status_t {
1223 uint8_t shift_pages_to_bytes;
1224 uint8_t shift_pages_to_kb;
1225 /* Fields are set to 0/NULL if failed to determine (or not requested) */
1228 USE_SELINUX(char *context;)
1229 /* Everything below must contain no ptrs to malloc'ed data:
1230 * it is memset(0) for each process in procps_scan() */
1231 unsigned long vsz, rss; /* we round it to kbytes */
1232 unsigned long stime, utime;
1233 unsigned long start_time;
1240 unsigned tty_major,tty_minor;
1241 #if ENABLE_FEATURE_TOPMEM
1242 unsigned long mapped_rw;
1243 unsigned long mapped_ro;
1244 unsigned long shared_clean;
1245 unsigned long shared_dirty;
1246 unsigned long private_clean;
1247 unsigned long private_dirty;
1248 unsigned long stack;
1251 /* basename of executable in exec(2), read from /proc/N/stat
1252 * (if executable is symlink or script, it is NOT replaced
1253 * by link target or interpreter name) */
1254 char comm[COMM_LEN];
1255 /* user/group? - use passwd/group parsing functions */
1256 #if ENABLE_FEATURE_TOP_SMP_PROCESS
1257 int last_seen_on_cpu;
1261 PSSCAN_PID = 1 << 0,
1262 PSSCAN_PPID = 1 << 1,
1263 PSSCAN_PGID = 1 << 2,
1264 PSSCAN_SID = 1 << 3,
1265 PSSCAN_UIDGID = 1 << 4,
1266 PSSCAN_COMM = 1 << 5,
1267 /* PSSCAN_CMD = 1 << 6, - use read_cmdline instead */
1268 PSSCAN_ARGV0 = 1 << 7,
1269 /* PSSCAN_EXE = 1 << 8, - not implemented */
1270 PSSCAN_STATE = 1 << 9,
1271 PSSCAN_VSZ = 1 << 10,
1272 PSSCAN_RSS = 1 << 11,
1273 PSSCAN_STIME = 1 << 12,
1274 PSSCAN_UTIME = 1 << 13,
1275 PSSCAN_TTY = 1 << 14,
1276 PSSCAN_SMAPS = (1 << 15) * ENABLE_FEATURE_TOPMEM,
1277 PSSCAN_ARGVN = (1 << 16) * (ENABLE_PGREP || ENABLE_PKILL || ENABLE_PIDOF),
1278 USE_SELINUX(PSSCAN_CONTEXT = 1 << 17,)
1279 PSSCAN_START_TIME = 1 << 18,
1280 PSSCAN_CPU = 1 << 19,
1281 /* These are all retrieved from proc/NN/stat in one go: */
1282 PSSCAN_STAT = PSSCAN_PPID | PSSCAN_PGID | PSSCAN_SID
1283 /**/ | PSSCAN_COMM | PSSCAN_STATE
1284 /**/ | PSSCAN_VSZ | PSSCAN_RSS
1285 /**/ | PSSCAN_STIME | PSSCAN_UTIME | PSSCAN_START_TIME
1287 #if ENABLE_FEATURE_TOP_SMP_PROCESS
1291 //procps_status_t* alloc_procps_scan(void) FAST_FUNC;
1292 void free_procps_scan(procps_status_t* sp) FAST_FUNC;
1293 procps_status_t* procps_scan(procps_status_t* sp, int flags) FAST_FUNC;
1294 /* Format cmdline (up to col chars) into char buf[col+1] */
1295 /* Puts [comm] if cmdline is empty (-> process is a kernel thread) */
1296 void read_cmdline(char *buf, int col, unsigned pid, const char *comm) FAST_FUNC;
1297 pid_t *find_pid_by_name(const char* procName) FAST_FUNC;
1298 pid_t *pidlist_reverse(pid_t *pidList) FAST_FUNC;
1301 extern const char bb_uuenc_tbl_base64[];
1302 extern const char bb_uuenc_tbl_std[];
1303 void bb_uuencode(char *store, const void *s, int length, const char *tbl) FAST_FUNC;
1305 typedef struct sha1_ctx_t {
1310 void sha1_begin(sha1_ctx_t *ctx) FAST_FUNC;
1311 void sha1_hash(const void *data, size_t length, sha1_ctx_t *ctx) FAST_FUNC;
1312 void *sha1_end(void *resbuf, sha1_ctx_t *ctx) FAST_FUNC;
1314 typedef struct md5_ctx_t {
1323 void md5_begin(md5_ctx_t *ctx) FAST_FUNC;
1324 void md5_hash(const void *data, size_t length, md5_ctx_t *ctx) FAST_FUNC;
1325 void *md5_end(void *resbuf, md5_ctx_t *ctx) FAST_FUNC;
1327 uint32_t *crc32_filltable(uint32_t *tbl256, int endian) FAST_FUNC;
1329 typedef struct masks_labels_t {
1333 int print_flags_separated(const int *masks, const char *labels,
1334 int flags, const char *separator) FAST_FUNC;
1335 int print_flags(const masks_labels_t *ml, int flags) FAST_FUNC;
1338 extern const char *applet_name;
1339 /* "BusyBox vN.N.N (timestamp or extra_version)" */
1340 extern const char bb_banner[];
1341 extern const char bb_msg_memory_exhausted[];
1342 extern const char bb_msg_invalid_date[];
1343 extern const char bb_msg_read_error[];
1344 extern const char bb_msg_write_error[];
1345 extern const char bb_msg_unknown[];
1346 extern const char bb_msg_can_not_create_raw_socket[];
1347 extern const char bb_msg_perm_denied_are_you_root[];
1348 extern const char bb_msg_requires_arg[];
1349 extern const char bb_msg_invalid_arg[];
1350 extern const char bb_msg_standard_input[];
1351 extern const char bb_msg_standard_output[];
1353 extern const char bb_str_default[];
1354 /* NB: (bb_hexdigits_upcase[i] | 0x20) -> lowercase hex digit */
1355 extern const char bb_hexdigits_upcase[];
1357 extern const char bb_path_mtab_file[];
1358 extern const char bb_path_passwd_file[];
1359 extern const char bb_path_shadow_file[];
1360 extern const char bb_path_gshadow_file[];
1361 extern const char bb_path_group_file[];
1362 extern const char bb_path_motd_file[];
1363 extern const char bb_path_wtmp_file[];
1364 extern const char bb_dev_null[];
1365 extern const char bb_busybox_exec_path[];
1366 /* util-linux manpage says /sbin:/bin:/usr/sbin:/usr/bin,
1367 * but I want to save a few bytes here */
1368 extern const char bb_PATH_root_path[]; /* "PATH=/sbin:/usr/sbin:/bin:/usr/bin" */
1369 #define bb_default_root_path (bb_PATH_root_path + sizeof("PATH"))
1370 #define bb_default_path (bb_PATH_root_path + sizeof("PATH=/sbin:/usr/sbin"))
1372 extern const int const_int_0;
1373 extern const int const_int_1;
1379 /* Providing hard guarantee on minimum size (think of BUFSIZ == 128) */
1380 enum { COMMON_BUFSIZE = (BUFSIZ >= 256*sizeof(void*) ? BUFSIZ+1 : 256*sizeof(void*)) };
1381 extern char bb_common_bufsiz1[COMMON_BUFSIZE];
1382 /* This struct is deliberately not defined. */
1383 /* See docs/keep_data_small.txt */
1385 /* '*const' ptr makes gcc optimize code much better.
1386 * Magic prevents ptr_to_globals from going into rodata.
1387 * If you want to assign a value, use SET_PTR_TO_GLOBALS(x) */
1388 extern struct globals *const ptr_to_globals;
1389 /* At least gcc 3.4.6 on mipsel system needs optimization barrier */
1390 #define barrier() __asm__ __volatile__("":::"memory")
1391 #define SET_PTR_TO_GLOBALS(x) do { \
1392 (*(struct globals**)&ptr_to_globals) = (x); \
1396 /* You can change LIBBB_DEFAULT_LOGIN_SHELL, but don't use it,
1397 * use bb_default_login_shell and following defines.
1398 * If you change LIBBB_DEFAULT_LOGIN_SHELL,
1399 * don't forget to change increment constant. */
1400 #define LIBBB_DEFAULT_LOGIN_SHELL "-/bin/sh"
1401 extern const char bb_default_login_shell[];
1403 #define DEFAULT_SHELL (bb_default_login_shell+1)
1405 #define DEFAULT_SHELL_SHORT_NAME (bb_default_login_shell+6)
1407 #if ENABLE_FEATURE_DEVFS
1408 # define CURRENT_VC "/dev/vc/0"
1409 # define VC_1 "/dev/vc/1"
1410 # define VC_2 "/dev/vc/2"
1411 # define VC_3 "/dev/vc/3"
1412 # define VC_4 "/dev/vc/4"
1413 # define VC_5 "/dev/vc/5"
1414 #if defined(__sh__) || defined(__H8300H__) || defined(__H8300S__)
1415 /* Yes, this sucks, but both SH (including sh64) and H8 have a SCI(F) for their
1416 respective serial ports .. as such, we can't use the common device paths for
1418 # define SC_0 "/dev/ttsc/0"
1419 # define SC_1 "/dev/ttsc/1"
1420 # define SC_FORMAT "/dev/ttsc/%d"
1422 # define SC_0 "/dev/tts/0"
1423 # define SC_1 "/dev/tts/1"
1424 # define SC_FORMAT "/dev/tts/%d"
1426 # define VC_FORMAT "/dev/vc/%d"
1427 # define LOOP_FORMAT "/dev/loop/%d"
1428 # define LOOP_NAMESIZE (sizeof("/dev/loop/") + sizeof(int)*3 + 1)
1429 # define LOOP_NAME "/dev/loop/"
1430 # define FB_0 "/dev/fb/0"
1432 # define CURRENT_VC "/dev/tty0"
1433 # define VC_1 "/dev/tty1"
1434 # define VC_2 "/dev/tty2"
1435 # define VC_3 "/dev/tty3"
1436 # define VC_4 "/dev/tty4"
1437 # define VC_5 "/dev/tty5"
1438 #if defined(__sh__) || defined(__H8300H__) || defined(__H8300S__)
1439 # define SC_0 "/dev/ttySC0"
1440 # define SC_1 "/dev/ttySC1"
1441 # define SC_FORMAT "/dev/ttySC%d"
1443 # define SC_0 "/dev/ttyS0"
1444 # define SC_1 "/dev/ttyS1"
1445 # define SC_FORMAT "/dev/ttyS%d"
1447 # define VC_FORMAT "/dev/tty%d"
1448 # define LOOP_FORMAT "/dev/loop%d"
1449 # define LOOP_NAMESIZE (sizeof("/dev/loop") + sizeof(int)*3 + 1)
1450 # define LOOP_NAME "/dev/loop"
1451 # define FB_0 "/dev/fb0"
1454 /* The following devices are the same on devfs and non-devfs systems. */
1455 #define CURRENT_TTY "/dev/tty"
1456 #define DEV_CONSOLE "/dev/console"
1459 #ifndef RB_POWER_OFF
1460 /* Stop system and switch power off if possible. */
1461 #define RB_POWER_OFF 0x4321fedc
1464 /* Make sure we call functions instead of macros. */
1478 /* This one is more efficient - we save ~400 bytes */
1480 #define isdigit(a) ((unsigned)((a) - '0') <= 9)
1482 #define ARRAY_SIZE(x) ((unsigned)(sizeof(x) / sizeof((x)[0])))
1485 #if __GNUC_PREREQ(4,1)
1486 # pragma GCC visibility pop
1490 #endif /* __LIBBUSYBOX_H__ */