3 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
5 * SPDX-License-Identifier: GPL-2.0+
8 #ifndef __FDT_SUPPORT_H
9 #define __FDT_SUPPORT_H
11 #ifdef CONFIG_OF_LIBFDT
15 u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell,
16 const char *prop, const u32 dflt);
17 u32 fdt_getprop_u32_default(const void *fdt, const char *path,
18 const char *prop, const u32 dflt);
21 * Add data to the root of the FDT before booting the OS.
23 * See doc/device-tree-bindings/root.txt
25 * @param fdt FDT address in memory
26 * @return 0 if ok, or -FDT_ERR_... on error
28 int fdt_root(void *fdt);
31 * Add chosen data the FDT before booting the OS.
33 * In particular, this adds the kernel command line (bootargs) to the FDT.
35 * @param fdt FDT address in memory
36 * @return 0 if ok, or -FDT_ERR_... on error
38 int fdt_chosen(void *fdt);
41 * Add initrd information to the FDT before booting the OS.
43 * @param fdt FDT address in memory
44 * @return 0 if ok, or -FDT_ERR_... on error
46 int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end);
48 void do_fixup_by_path(void *fdt, const char *path, const char *prop,
49 const void *val, int len, int create);
50 void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop,
53 static inline void do_fixup_by_path_string(void *fdt, const char *path,
54 const char *prop, const char *status)
56 do_fixup_by_path(fdt, path, prop, status, strlen(status) + 1, 1);
59 void do_fixup_by_prop(void *fdt,
60 const char *pname, const void *pval, int plen,
61 const char *prop, const void *val, int len,
63 void do_fixup_by_prop_u32(void *fdt,
64 const char *pname, const void *pval, int plen,
65 const char *prop, u32 val, int create);
66 void do_fixup_by_compat(void *fdt, const char *compat,
67 const char *prop, const void *val, int len, int create);
68 void do_fixup_by_compat_u32(void *fdt, const char *compat,
69 const char *prop, u32 val, int create);
70 int fdt_fixup_memory(void *blob, u64 start, u64 size);
71 int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks);
72 void fdt_fixup_ethernet(void *fdt);
73 int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
74 const void *val, int len, int create);
75 void fdt_fixup_qe_firmware(void *fdt);
78 * Update native-mode property of display-timings node to the phandle
79 * of the timings matching a display by name (case insensitive).
81 * see kernel Documentation/devicetree/bindings/video/display-timing.txt
83 * @param blob FDT blob to update
84 * @param path path within dt
85 * @param display name of display timing to match
86 * @return 0 if ok, or -FDT_ERR_... on error
88 int fdt_fixup_display(void *blob, const char *path, const char *display);
90 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
91 void fdt_fixup_dr_usb(void *blob, bd_t *bd);
93 static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
94 #endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
96 #if defined(CONFIG_SYS_FSL_SEC_COMPAT)
97 void fdt_fixup_crypto_node(void *blob, int sec_rev);
99 static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
104 int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
107 int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name);
110 * Add board-specific data to the FDT before booting the OS.
112 * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
113 * This function is called if CONFIG_OF_BOARD_SETUP is defined
115 * @param blob FDT blob to update
116 * @param bd_t Pointer to board data
117 * @return 0 if ok, or -FDT_ERR_... on error
119 int ft_board_setup(void *blob, bd_t *bd);
122 * The keystone2 SOC requires all 32 bit aliased addresses to be converted
123 * to their 36 physical format. This has to happen after all fdt nodes
124 * are added or modified by the image_setup_libfdt(). The ft_board_setup_ex()
125 * called at the end of the image_setup_libfdt() is to do that convertion.
127 void ft_board_setup_ex(void *blob, bd_t *bd);
128 void ft_cpu_setup(void *blob, bd_t *bd);
129 void ft_pci_setup(void *blob, bd_t *bd);
132 * Add system-specific data to the FDT before booting the OS.
134 * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
135 * This function is called if CONFIG_OF_SYSTEM_SETUP is defined
137 * @param blob FDT blob to update
138 * @param bd_t Pointer to board data
139 * @return 0 if ok, or -FDT_ERR_... on error
141 int ft_system_setup(void *blob, bd_t *bd);
143 void set_working_fdt_addr(ulong addr);
144 int fdt_shrink_to_minimum(void *blob);
145 int fdt_increase_size(void *fdt, int add_len);
147 int fdt_fixup_nor_flash_size(void *blob);
149 void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
150 void fdt_del_node_and_alias(void *blob, const char *alias);
151 u64 fdt_translate_address(void *blob, int node_offset, const __be32 *in_addr);
152 int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
153 phys_addr_t compat_off);
154 int fdt_alloc_phandle(void *blob);
155 int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle);
156 unsigned int fdt_create_phandle(void *fdt, int nodeoffset);
157 int fdt_add_edid(void *blob, const char *compat, unsigned char *buf);
159 int fdt_verify_alias_address(void *fdt, int anode, const char *alias,
161 u64 fdt_get_base_address(void *fdt, int node);
162 int fdt_read_range(void *fdt, int node, int n, uint64_t *child_addr,
163 uint64_t *addr, uint64_t *len);
169 FDT_STATUS_FAIL_ERROR_CODE,
171 int fdt_set_node_status(void *fdt, int nodeoffset,
172 enum fdt_status status, unsigned int error_code);
173 static inline int fdt_status_okay(void *fdt, int nodeoffset)
175 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY, 0);
177 static inline int fdt_status_disabled(void *fdt, int nodeoffset)
179 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0);
181 static inline int fdt_status_fail(void *fdt, int nodeoffset)
183 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0);
186 int fdt_set_status_by_alias(void *fdt, const char *alias,
187 enum fdt_status status, unsigned int error_code);
188 static inline int fdt_status_okay_by_alias(void *fdt, const char *alias)
190 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0);
192 static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias)
194 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0);
196 static inline int fdt_status_fail_by_alias(void *fdt, const char *alias)
198 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0);
201 /* Helper to read a big number; size is in cells (not bytes) */
202 static inline u64 of_read_number(const fdt32_t *cell, int size)
206 r = (r << 32) | fdt32_to_cpu(*(cell++));
210 void of_bus_default_count_cells(void *blob, int parentoffset,
211 int *addrc, int *sizec);
212 int ft_verify_fdt(void *fdt);
213 int arch_fixup_memory_node(void *blob);
215 int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width,
216 u32 height, u32 stride, const char *format);
218 #endif /* ifdef CONFIG_OF_LIBFDT */
221 int fdtdec_get_int(const void *blob, int node, const char *prop_name,
224 #endif /* ifndef __FDT_SUPPORT_H */