2 * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
4 * See file CREDITS for list of people who contributed to this
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 /************************************************************************
24 * 1 january 2005 Alain Saurel <asaurel@amcc.com>
25 * Adapted to current Das U-Boot source
26 ***********************************************************************/
27 /************************************************************************
28 * yucca.h - configuration for AMCC 440SPe Ref (yucca)
29 ***********************************************************************/
37 /*-----------------------------------------------------------------------
38 * High Level Configuration Options
39 *----------------------------------------------------------------------*/
40 #define CONFIG_4xx 1 /* ... PPC4xx family */
41 #define CONFIG_440 1 /* ... PPC440 family */
42 #define CONFIG_440SPE 1 /* Specifc SPe support */
43 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
44 #undef CFG_DRAM_TEST /* Disable-takes long time */
45 #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
46 #define EXTCLK_33_33 33333333
47 #define EXTCLK_66_66 66666666
48 #define EXTCLK_50 50000000
49 #define EXTCLK_83 83333333
51 #define CONFIG_IBM_EMAC4_V4 1
52 #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
53 #undef CONFIG_SHOW_BOOT_PROGRESS
56 /*-----------------------------------------------------------------------
57 * Base addresses -- Note these are effective addresses where the
58 * actual resources get mapped (not physical addresses)
59 *----------------------------------------------------------------------*/
60 #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
61 #define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */
62 #define CFG_MONITOR_BASE 0xfffb0000 /* start of monitor */
63 #define CFG_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */
64 #define CFG_ISRAM_BASE 0x90000000 /* internal SRAM */
66 #define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
67 #define CFG_PCI_MEMBASE1 0x90000000 /* mapped pci memory */
68 #define CFG_PCI_MEMBASE2 0xa0000000 /* mapped pci memory */
69 #define CFG_PCI_MEMBASE3 0xb0000000 /* mapped pci memory */
71 #define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
72 #define CFG_PCI_TARGBASE 0x80000000 /*PCIaddr mapped to CFG_PCI_MEMBASE*/
74 /* #define CFG_PCI_BASE_IO 0xB8000000 */ /* internal PCI I-O */
75 /* #define CFG_PCI_BASE_REGS 0xBEC00000 */ /* internal PCI regs */
76 /* #define CFG_PCI_BASE_CYCLE 0xBED00000 */ /* internal PCI regs */
78 /* System RAM mapped to PCI space */
79 #define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE
80 #define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
81 #define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
83 #define CFG_FPGA_BASE 0xe2000000 /* epld */
84 #define CFG_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */
86 /* #define CFG_NVRAM_BASE_ADDR 0x08000000 */
87 /*-----------------------------------------------------------------------
88 * Initial RAM & stack pointer (placed in internal SRAM)
89 *----------------------------------------------------------------------*/
90 #define CFG_TEMP_STACK_OCM 1
91 #define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE
92 #define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
93 #define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
94 #define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
96 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
97 #define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
98 #define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
100 #define CFG_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Mon */
101 #define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc */
103 /*-----------------------------------------------------------------------
105 *----------------------------------------------------------------------*/
106 #define CONFIG_SERIAL_MULTI 1
107 #undef CONFIG_UART1_CONSOLE
109 #undef CONFIG_SERIAL_SOFTWARE_FIFO
110 #undef CFG_EXT_SERIAL_CLOCK
111 /* #define CFG_EXT_SERIAL_CLOCK (1843200 * 6) */ /* Ext clk @ 11.059 MHz */
113 #define CONFIG_BAUDRATE 115200
115 #define CFG_BAUDRATE_TABLE \
116 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
118 /*-----------------------------------------------------------------------
120 *----------------------------------------------------------------------*/
121 #undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
122 #define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses */
123 #define IIC0_DIMM0_ADDR 0x53
124 #define IIC0_DIMM1_ADDR 0x52
126 /*-----------------------------------------------------------------------
128 *----------------------------------------------------------------------*/
129 #define CONFIG_HARD_I2C 1 /* I2C with hardware support */
130 #undef CONFIG_SOFT_I2C /* I2C bit-banged */
131 #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
132 #define CFG_I2C_SLAVE 0x7F
134 #define IIC0_BOOTPROM_ADDR 0x50
135 #define IIC0_ALT_BOOTPROM_ADDR 0x54
137 /* Don't probe these addrs */
138 #define CFG_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54}
140 /* #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
141 /* #define CFG_I2C_EEPROM_ADDR 0x50 */ /* I2C boot EEPROM */
142 #define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
145 /*-----------------------------------------------------------------------
147 *----------------------------------------------------------------------*/
148 /* #define CFG_NVRAM_SIZE (0x2000 - 8) */ /* NVRAM size(8k)- RTC regs */
150 #undef CFG_ENV_IS_IN_NVRAM /* ... not in NVRAM */
151 #define CFG_ENV_IS_IN_FLASH 1 /* Environment uses flash */
152 #undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
153 #define CONFIG_ENV_OVERWRITE 1
155 #define CONFIG_BOOTARGS "console=ttyS0,115200n8 root=/dev/nfs rw"
156 #define CONFIG_BOOTCOMMAND "bootm E7C00000" /* autoboot command */
157 #define CONFIG_BOOTDELAY -1 /* -1 to disable autoboot */
159 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
160 #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
162 #define CONFIG_MII 1 /* MII PHY management */
163 #undef CONFIG_NET_MULTI
164 #define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
165 #define CONFIG_HAS_ETH0
166 #define CONFIG_PHY_RESET 1 /* reset phy upon startup */
167 #define CONFIG_PHY_RESET_DELAY 1000
168 #define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
169 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
170 #define CONFIG_NETMASK 255.255.0.0
171 #define CONFIG_IPADDR 192.168.80.10
172 #define CONFIG_ETHADDR 00:04:AC:01:CA:FE
173 #define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
174 #define CONFIG_SERVERIP 192.168.1.1
176 #define CONFIG_EXTRA_ENV_SETTINGS \
180 "nfsargs=setenv bootargs root=/dev/nfs rw " \
181 "nfsroot=${serverip}:${rootpath}\0" \
182 "ramargs=setenv bootargs root=/dev/ram rw\0" \
183 "addip=setenv bootargs ${bootargs} " \
184 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
185 ":${hostname}:${netdev}:off panic=1\0" \
186 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
187 "flash_nfs=run nfsargs addip addtty;" \
188 "bootm ${kernel_addr}\0" \
189 "flash_self=run ramargs addip addtty;" \
190 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
191 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
193 "rootpath=/opt/eldk-4.0/ppc_4xx\0" \
194 "bootfile=yucca/uImage\0" \
195 "kernel_addr=E7F10000\0" \
196 "ramdisk_addr=E7F20000\0" \
197 "load=tftp 100000 yuca/u-boot.bin\0" \
198 "update=protect off 2:4-7;era 2:4-7;" \
199 "cp.b ${fileaddr} FFFB0000 ${filesize};" \
200 "setenv filesize;saveenv\0" \
201 "upd=run load;run update\0" \
204 #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
216 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
217 #include <cmd_confdefs.h>
219 #undef CONFIG_WATCHDOG /* watchdog disabled */
222 * Miscellaneous configurable options
224 #define CFG_LONGHELP /* undef to save memory */
225 #define CFG_PROMPT "=> " /* Monitor Command Prompt */
227 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
228 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
230 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
232 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
233 #define CFG_MAXARGS 16 /* max number of command args */
234 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
236 #define CFG_MEMTEST_START 0x0400000 /* memtest works on */
237 #define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
239 #define CFG_LOAD_ADDR 0x100000 /* default load address */
240 #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
242 #define CFG_HZ 1 /* decrementer freq: 1 ms ticks */
244 /*-----------------------------------------------------------------------
246 *----------------------------------------------------------------------*/
247 #define CFG_MAX_FLASH_BANKS 3 /* number of banks */
248 #define CFG_MAX_FLASH_SECT 256 /* sectors per device */
250 #undef CFG_FLASH_CHECKSUM
251 #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
252 #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
254 #define CFG_FLASH_ADDR0 0x5555
255 #define CFG_FLASH_ADDR1 0x2aaa
256 #define CFG_FLASH_WORD_SIZE unsigned char
258 #define CFG_FLASH_2ND_16BIT_DEV 1 /* evb440SPe has 8 and 16bit device */
259 #define CFG_FLASH_2ND_ADDR 0xe7c00000 /* evb440SPe has 8 and 16bit device*/
261 #ifdef CFG_ENV_IS_IN_FLASH
262 #define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
263 #define CFG_ENV_ADDR 0xfffa0000
264 /* #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) */
265 #define CFG_ENV_SIZE 0x10000 /* Size of Environment vars */
266 #endif /* CFG_ENV_IS_IN_FLASH */
267 /*-----------------------------------------------------------------------
269 *-----------------------------------------------------------------------
272 #define CONFIG_PCI /* include pci support */
273 #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
274 #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
275 #undef CONFIG_PCI_CONFIG_HOST_BRIDGE
277 /* Board-specific PCI */
278 #define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */
279 #define CFG_PCI_TARGET_INIT /* let board init pci target */
280 #undef CFG_PCI_MASTER_INIT
282 #define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
283 #define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
284 /* #define CFG_PCI_SUBSYS_ID CFG_PCI_SUBSYS_DEVICEID */
287 * NETWORK Support (PCI):
289 /* Support for Intel 82557/82559/82559ER chips. */
290 #define CONFIG_EEPRO100
292 * For booting Linux, the board info and command line data
293 * have to be in the first 8 MB of memory, since this is
294 * the maximum mapped by the Linux kernel during initialization.
296 #define CFG_BOOTMAPSZ (8 << 20) /*Initial Memory map for Linux*/
297 /*-----------------------------------------------------------------------
298 * Cache Configuration
300 #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
301 #define CFG_CACHELINE_SIZE 32 /* ... */
302 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
303 #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
307 * Internal Definitions
311 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
312 #define BOOTFLAG_WARM 0x02 /* Software reboot */
314 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
315 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
316 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
319 /* FB Divisor selection */
320 #define FPGA_FB_DIV_6 6
321 #define FPGA_FB_DIV_10 10
322 #define FPGA_FB_DIV_12 12
323 #define FPGA_FB_DIV_20 20
325 /* VCO Divisor selection */
326 #define FPGA_VCO_DIV_4 4
327 #define FPGA_VCO_DIV_6 6
328 #define FPGA_VCO_DIV_8 8
329 #define FPGA_VCO_DIV_10 10
331 /*----------------------------------------------------------------------------+
332 | FPGA registers and bit definitions
333 +----------------------------------------------------------------------------*/
334 /* PowerPC 440SPe Board FPGA is reached with physical address 0x1 E2000000. */
335 /* TLB initialization makes it correspond to logical address 0xE2000000. */
336 /* => Done init_chip.s in bootlib */
337 #define FPGA_REG_BASE_ADDR 0xE2000000
338 #define FPGA_GPIO_BASE_ADDR 0xE2010000
339 #define FPGA_INT_BASE_ADDR 0xE2020000
341 /*----------------------------------------------------------------------------+
343 +----------------------------------------------------------------------------*/
344 #define PPC440SPE_DISPLAY FPGA_REG_BASE_ADDR
346 #define PPC440SPE_DISPLAY_D8 (FPGA_REG_BASE_ADDR+0x06)
347 #define PPC440SPE_DISPLAY_D4 (FPGA_REG_BASE_ADDR+0x04)
348 #define PPC440SPE_DISPLAY_D2 (FPGA_REG_BASE_ADDR+0x02)
349 #define PPC440SPE_DISPLAY_D1 (FPGA_REG_BASE_ADDR+0x00)
350 /*define WRITE_DISPLAY_DIGIT(n) IOREG8(FPGA_REG_BASE_ADDR + (2*n))*/
351 /*#define IOREG8(addr) *((volatile unsigned char *)(addr))*/
353 /*----------------------------------------------------------------------------+
354 | ethernet/reset/boot Register 1
355 +----------------------------------------------------------------------------*/
356 #define FPGA_REG10 (FPGA_REG_BASE_ADDR+0x10)
358 #define FPGA_REG10_10MHZ_ENABLE 0x8000
359 #define FPGA_REG10_100MHZ_ENABLE 0x4000
360 #define FPGA_REG10_GIGABIT_ENABLE 0x2000
361 #define FPGA_REG10_FULL_DUPLEX 0x1000 /* force Full Duplex*/
362 #define FPGA_REG10_RESET_ETH 0x0800
363 #define FPGA_REG10_AUTO_NEG_DIS 0x0400
364 #define FPGA_REG10_INTP_ETH 0x0200
366 #define FPGA_REG10_RESET_HISR 0x0080
367 #define FPGA_REG10_ENABLE_DISPLAY 0x0040
368 #define FPGA_REG10_RESET_SDRAM 0x0020
369 #define FPGA_REG10_OPER_BOOT 0x0010
370 #define FPGA_REG10_SRAM_BOOT 0x0008
371 #define FPGA_REG10_SMALL_BOOT 0x0004
372 #define FPGA_REG10_FORCE_COLA 0x0002
373 #define FPGA_REG10_COLA_MANUAL 0x0001
375 #define FPGA_REG10_SDRAM_ENABLE 0x0020
377 #define FPGA_REG10_ENET_ENCODE2(n) ((((unsigned long)(n))&0x0F)<<4) /*from ocotea ?*/
378 #define FPGA_REG10_ENET_DECODE2(n) ((((unsigned long)(n))>>4)&0x0F) /*from ocotea ?*/
380 /*----------------------------------------------------------------------------+
382 +----------------------------------------------------------------------------*/
383 #define FPGA_REG12 (FPGA_REG_BASE_ADDR+0x12)
385 #define FPGA_REG12_EBC_CTL 0x8000
386 #define FPGA_REG12_UART1_CTS_RTS 0x4000
387 #define FPGA_REG12_UART0_RX_ENABLE 0x2000
388 #define FPGA_REG12_UART1_RX_ENABLE 0x1000
389 #define FPGA_REG12_UART2_RX_ENABLE 0x0800
390 #define FPGA_REG12_EBC_OUT_ENABLE 0x0400
391 #define FPGA_REG12_GPIO0_OUT_ENABLE 0x0200
392 #define FPGA_REG12_GPIO1_OUT_ENABLE 0x0100
393 #define FPGA_REG12_GPIO_SELECT 0x0010
394 #define FPGA_REG12_GPIO_CHREG 0x0008
395 #define FPGA_REG12_GPIO_CLK_CHREG 0x0004
396 #define FPGA_REG12_GPIO_OETRI 0x0002
397 #define FPGA_REG12_EBC_ERROR 0x0001
399 /*----------------------------------------------------------------------------+
401 +----------------------------------------------------------------------------*/
402 #define FPGA_REG16 (FPGA_REG_BASE_ADDR+0x16)
404 #define FPGA_REG16_PCI_CLK_CTL0 0x8000
405 #define FPGA_REG16_PCI_CLK_CTL1 0x4000
406 #define FPGA_REG16_PCI_CLK_CTL2 0x2000
407 #define FPGA_REG16_PCI_CLK_CTL3 0x1000
408 #define FPGA_REG16_PCI_CLK_CTL4 0x0800
409 #define FPGA_REG16_PCI_CLK_CTL5 0x0400
410 #define FPGA_REG16_PCI_CLK_CTL6 0x0200
411 #define FPGA_REG16_PCI_CLK_CTL7 0x0100
412 #define FPGA_REG16_PCI_CLK_CTL8 0x0080
413 #define FPGA_REG16_PCI_CLK_CTL9 0x0040
414 #define FPGA_REG16_PCI_EXT_ARB0 0x0020
415 #define FPGA_REG16_PCI_MODE_1 0x0010
416 #define FPGA_REG16_PCI_TARGET_MODE 0x0008
417 #define FPGA_REG16_PCI_INTP_MODE 0x0004
419 /* FB1 Divisor selection */
420 #define FPGA_REG16_FB2_DIV_MASK 0x1000
421 #define FPGA_REG16_FB2_DIV_LOW 0x0000
422 #define FPGA_REG16_FB2_DIV_HIGH 0x1000
423 /* FB2 Divisor selection */
424 /* S3 switch on Board */
425 #define FPGA_REG16_FB1_DIV_MASK 0x2000
426 #define FPGA_REG16_FB1_DIV_LOW 0x0000
427 #define FPGA_REG16_FB1_DIV_HIGH 0x2000
428 /* PCI0 Clock Selection */
429 /* S3 switch on Board */
430 #define FPGA_REG16_PCI0_CLK_MASK 0x0c00
431 #define FPGA_REG16_PCI0_CLK_33_33 0x0000
432 #define FPGA_REG16_PCI0_CLK_66_66 0x0800
433 #define FPGA_REG16_PCI0_CLK_100 0x0400
434 #define FPGA_REG16_PCI0_CLK_133_33 0x0c00
435 /* VCO Divisor selection */
436 /* S3 switch on Board */
437 #define FPGA_REG16_VCO_DIV_MASK 0xc000
438 #define FPGA_REG16_VCO_DIV_4 0x0000
439 #define FPGA_REG16_VCO_DIV_8 0x4000
440 #define FPGA_REG16_VCO_DIV_6 0x8000
441 #define FPGA_REG16_VCO_DIV_10 0xc000
442 /* Master Clock Selection */
443 /* S3, S4 switches on Board */
444 #define FPGA_REG16_MASTER_CLK_MASK 0x01c0
445 #define FPGA_REG16_MASTER_CLK_EXT 0x0000
446 #define FPGA_REG16_MASTER_CLK_66_66 0x0040
447 #define FPGA_REG16_MASTER_CLK_50 0x0080
448 #define FPGA_REG16_MASTER_CLK_33_33 0x00c0
449 #define FPGA_REG16_MASTER_CLK_25 0x0100
451 /*----------------------------------------------------------------------------+
453 +----------------------------------------------------------------------------*/
454 #define FPGA_REG18 (FPGA_REG_BASE_ADDR+0x18)
456 #define FPGA_REG18_PCI_PRSNT1 0x8000
457 #define FPGA_REG18_PCI_PRSNT2 0x4000
458 #define FPGA_REG18_PCI_INTA 0x2000
459 #define FPGA_REG18_PCI_SLOT0_INTP 0x1000
460 #define FPGA_REG18_PCI_SLOT1_INTP 0x0800
461 #define FPGA_REG18_PCI_SLOT2_INTP 0x0400
462 #define FPGA_REG18_PCI_SLOT3_INTP 0x0200
463 #define FPGA_REG18_PCI_PCI0_VC 0x0100
464 #define FPGA_REG18_PCI_PCI0_VTH1 0x0080
465 #define FPGA_REG18_PCI_PCI0_VTH2 0x0040
466 #define FPGA_REG18_PCI_PCI0_VTH3 0x0020
468 /*----------------------------------------------------------------------------+
470 +----------------------------------------------------------------------------*/
471 #define FPGA_REG1A (FPGA_REG_BASE_ADDR+0x1A)
473 #define FPGA_REG1A_PE0_GLED 0x8000
474 #define FPGA_REG1A_PE1_GLED 0x4000
475 #define FPGA_REG1A_PE2_GLED 0x2000
476 #define FPGA_REG1A_PE0_YLED 0x1000
477 #define FPGA_REG1A_PE1_YLED 0x0800
478 #define FPGA_REG1A_PE2_YLED 0x0400
479 #define FPGA_REG1A_PE0_PWRON 0x0200
480 #define FPGA_REG1A_PE1_PWRON 0x0100
481 #define FPGA_REG1A_PE2_PWRON 0x0080
482 #define FPGA_REG1A_PE0_REFCLK_ENABLE 0x0040
483 #define FPGA_REG1A_PE1_REFCLK_ENABLE 0x0020
484 #define FPGA_REG1A_PE2_REFCLK_ENABLE 0x0010
485 #define FPGA_REG1A_PE_SPREAD0 0x0008
486 #define FPGA_REG1A_PE_SPREAD1 0x0004
487 #define FPGA_REG1A_PE_SELSOURCE_0 0x0002
488 #define FPGA_REG1A_PE_SELSOURCE_1 0x0001
490 /*----------------------------------------------------------------------------+
492 +----------------------------------------------------------------------------*/
493 #define FPGA_REG1C (FPGA_REG_BASE_ADDR+0x1C)
495 #define FPGA_REG1C_PE0_ROOTPOINT 0x8000
496 #define FPGA_REG1C_PE1_ENDPOINT 0x4000
497 #define FPGA_REG1C_PE2_ENDPOINT 0x2000
498 #define FPGA_REG1C_PE0_PRSNT 0x1000
499 #define FPGA_REG1C_PE1_PRSNT 0x0800
500 #define FPGA_REG1C_PE2_PRSNT 0x0400
501 #define FPGA_REG1C_PE0_WAKE 0x0080
502 #define FPGA_REG1C_PE1_WAKE 0x0040
503 #define FPGA_REG1C_PE2_WAKE 0x0020
504 #define FPGA_REG1C_PE0_PERST 0x0010
505 #define FPGA_REG1C_PE1_PERST 0x0080
506 #define FPGA_REG1C_PE2_PERST 0x0040
508 /*----------------------------------------------------------------------------+
510 +----------------------------------------------------------------------------*/
511 #define PERIOD_133_33MHZ 7500 /* 7,5ns */
512 #define PERIOD_100_00MHZ 10000 /* 10ns */
513 #define PERIOD_83_33MHZ 12000 /* 12ns */
514 #define PERIOD_75_00MHZ 13333 /* 13,333ns */
515 #define PERIOD_66_66MHZ 15000 /* 15ns */
516 #define PERIOD_50_00MHZ 20000 /* 20ns */
517 #define PERIOD_33_33MHZ 30000 /* 30ns */
518 #define PERIOD_25_00MHZ 40000 /* 40ns */
520 /*---------------------------------------------------------------------------*/
522 #endif /* __CONFIG_H */