ARMV7: AM3517/05: Add support for CraneBoard.
[oweals/u-boot.git] / include / configs / xpedite520x.h
1 /*
2  * Copyright 2008 Extreme Engineering Solutions, Inc.
3  * Copyright 2004-2008 Freescale Semiconductor, Inc.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23
24 /*
25  * xpedite520x board configuration file
26  */
27 #ifndef __CONFIG_H
28 #define __CONFIG_H
29
30 /*
31  * High Level Configuration Options
32  */
33 #define CONFIG_BOOKE            1       /* BOOKE */
34 #define CONFIG_E500             1       /* BOOKE e500 family */
35 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41/48 */
36 #define CONFIG_MPC8548          1
37 #define CONFIG_XPEDITE5200      1
38 #define CONFIG_SYS_BOARD_NAME   "XPedite5200"
39 #define CONFIG_SYS_FORM_PMC_XMC 1
40 #define CONFIG_BOARD_EARLY_INIT_R       /* Call board_pre_init */
41
42 #ifndef CONFIG_SYS_TEXT_BASE
43 #define CONFIG_SYS_TEXT_BASE    0xfff80000
44 #endif
45
46 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
47 #define CONFIG_PCI_PNP          1       /* do pci plug-and-play */
48 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
49 #define CONFIG_PCI1             1       /* PCI controller 1 */
50 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
51 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
52 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
53
54 /*
55  * DDR config
56  */
57 #define CONFIG_FSL_DDR2
58 #undef CONFIG_FSL_DDR_INTERACTIVE
59 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
60 #define CONFIG_DDR_SPD
61 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
62 #define SPD_EEPROM_ADDRESS              0x54
63 #define CONFIG_NUM_DDR_CONTROLLERS      1
64 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
65 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
66 #define CONFIG_DDR_ECC
67 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
68 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
69 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
70 #define CONFIG_VERY_BIG_RAM
71
72 #define CONFIG_SYS_CLK_FREQ     66666666
73
74 /*
75  * These can be toggled for performance analysis, otherwise use default.
76  */
77 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
78 #define CONFIG_BTB                      /* toggle branch predition */
79 #define CONFIG_ENABLE_36BIT_PHYS        1
80
81 /*
82  * Base addresses -- Note these are effective addresses where the
83  * actual resources get mapped (not physical addresses)
84  */
85 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
86 #define CONFIG_SYS_CCSRBAR              0xef000000      /* relocated CCSRBAR */
87 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
88 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
89
90 /*
91  * Diagnostics
92  */
93 #define CONFIG_SYS_ALT_MEMTEST
94 #define CONFIG_SYS_MEMTEST_START        0x10000000
95 #define CONFIG_SYS_MEMTEST_END          0x20000000
96 #define CONFIG_POST                     (CONFIG_SYS_POST_MEMORY | \
97                                          CONFIG_SYS_POST_I2C)
98 #define I2C_ADDR_LIST                   {CONFIG_SYS_I2C_MAX1237_ADDR,   \
99                                          CONFIG_SYS_I2C_EEPROM_ADDR,    \
100                                          CONFIG_SYS_I2C_PCA953X_ADDR0,  \
101                                          CONFIG_SYS_I2C_PCA953X_ADDR1,  \
102                                          CONFIG_SYS_I2C_RTC_ADDR}
103
104 /*
105  * Memory map
106  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
107  * 0x8000_0000  0xbfff_ffff     PCI1 Mem                1G non-cacheable
108  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
109  * 0xe800_0000  0xe87f_ffff     PCI1 IO                 8M non-cacheable
110  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
111  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
112  * 0xf800_0000  0xfbff_ffff     NOR Flash 2             64M non-cacheable
113  * 0xfc00_0000  0xffff_ffff     NOR Flash 1             64M non-cacheable
114  */
115
116 #define CONFIG_SYS_LBC_LCRR     (LCRR_CLKDIV_8 | LCRR_EADC_3)
117
118 /*
119  * NAND flash configuration
120  */
121 #define CONFIG_SYS_NAND_BASE            0xef800000
122 #define CONFIG_SYS_NAND_BASE2           0xef840000 /* Unused at this time */
123 #define CONFIG_SYS_MAX_NAND_DEVICE      1
124 #define CONFIG_NAND_ACTL
125 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 3)        /* ADDR3 is CLE */
126 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 4)        /* ADDR4 is ALE */
127 #define CONFIG_SYS_NAND_ACTL_NCE        (0)             /* NCE not controlled by ADDR */
128 #define CONFIG_SYS_NAND_ACTL_DELAY      25
129
130 /*
131  * NOR flash configuration
132  */
133 #define CONFIG_SYS_FLASH_BASE           0xfc000000
134 #define CONFIG_SYS_FLASH_BASE2          0xf8000000
135 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
136 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
137 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
138 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
139 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
140 #define CONFIG_FLASH_CFI_DRIVER
141 #define CONFIG_SYS_FLASH_CFI
142 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
143 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff40000, 0xc0000}, \
144                                                   {0xfbf40000, 0xc0000} }
145 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
146
147 /*
148  * Chip select configuration
149  */
150 /* NOR Flash 0 on CS0 */
151 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  | \
152                                  BR_PS_16               | \
153                                  BR_V)
154 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_64MB             | \
155                                  OR_GPCM_ACS_DIV4       | \
156                                  OR_GPCM_SCY_8)
157
158 /* NOR Flash 1 on CS1 */
159 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 | \
160                                  BR_PS_16               | \
161                                  BR_V)
162 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
163
164 /* NAND flash on CS2 */
165 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   | \
166                                  BR_PS_8                | \
167                                  BR_V)
168
169 /* NAND flash on CS2 */
170 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            | \
171                                  OR_GPCM_BCTLD          | \
172                                  OR_GPCM_CSNT           | \
173                                  OR_GPCM_ACS_DIV4       | \
174                                  OR_GPCM_SCY_4          | \
175                                  OR_GPCM_TRLX           | \
176                                  OR_GPCM_EHTR)
177
178 /* NAND flash on CS3 */
179 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  | \
180                                  BR_PS_8                | \
181                                  BR_V)
182 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
183
184 /*
185  * Use L1 as initial stack
186  */
187 #define CONFIG_SYS_INIT_RAM_LOCK        1
188 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
189 #define CONFIG_SYS_INIT_RAM_SIZE                0x4000
190
191 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
192 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
193
194 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
195 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
196
197 /*
198  * Serial Port
199  */
200 #define CONFIG_CONS_INDEX               1
201 #define CONFIG_SYS_NS16550
202 #define CONFIG_SYS_NS16550_SERIAL
203 #define CONFIG_SYS_NS16550_REG_SIZE     1
204 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
205 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
206 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
207 #define CONFIG_SYS_BAUDRATE_TABLE       \
208         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
209 #define CONFIG_BAUDRATE                 115200
210 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
211 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
212
213 /*
214  * Use the HUSH parser
215  */
216 #define CONFIG_SYS_HUSH_PARSER
217 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
218
219 /*
220  * Pass open firmware flat tree
221  */
222 #define CONFIG_OF_LIBFDT                1
223 #define CONFIG_OF_BOARD_SETUP           1
224 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
225
226 /*
227  * I2C
228  */
229 #define CONFIG_FSL_I2C                          /* Use FSL common I2C driver */
230 #define CONFIG_HARD_I2C                         /* I2C with hardware support */
231 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
232 #define CONFIG_SYS_I2C_SLAVE            0x7F
233 #define CONFIG_SYS_I2C_OFFSET           0x3000
234 #define CONFIG_SYS_I2C2_OFFSET          0x3100
235 #define CONFIG_I2C_MULTI_BUS
236
237 /* I2C EEPROM */
238 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
239 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
240 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
241 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
242
243 /* I2C RTC */
244 #define CONFIG_RTC_M41T11                       1
245 #define CONFIG_SYS_I2C_RTC_ADDR                 0x68
246 #define CONFIG_SYS_M41T11_BASE_YEAR             2000
247
248 /* GPIO */
249 #define CONFIG_PCA953X
250 #define CONFIG_SYS_I2C_PCA953X_ADDR0            0x18
251 #define CONFIG_SYS_I2C_PCA953X_ADDR1            0x19
252 #define CONFIG_SYS_I2C_PCA953X_ADDR             CONFIG_SYS_I2C_PCA953X_ADDR0
253
254 /* PCA957 @ 0x18 */
255 #define CONFIG_SYS_PCA953X_BRD_CFG0             0x01
256 #define CONFIG_SYS_PCA953X_BRD_CFG1             0x02
257 #define CONFIG_SYS_PCA953X_BRD_CFG2             0x04
258 #define CONFIG_SYS_PCA953X_XMC_ROOT0            0x08
259 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS        0x10
260 #define CONFIG_SYS_PCA953X_NVM_WP               0x20
261 #define CONFIG_SYS_PCA953X_MONARCH              0x40
262 #define CONFIG_SYS_PCA953X_EREADY               0x80
263
264 /* PCA957 @ 0x19 */
265 #define CONFIG_SYS_PCA953X_P14_IO0              0x01
266 #define CONFIG_SYS_PCA953X_P14_IO1              0x02
267 #define CONFIG_SYS_PCA953X_P14_IO2              0x04
268 #define CONFIG_SYS_PCA953X_P14_IO3              0x08
269 #define CONFIG_SYS_PCA953X_P14_IO4              0x10
270 #define CONFIG_SYS_PCA953X_P14_IO5              0x20
271 #define CONFIG_SYS_PCA953X_P14_IO6              0x40
272 #define CONFIG_SYS_PCA953X_P14_IO7              0x80
273
274 /* 12-bit ADC used to measure CPU diode */
275 #define CONFIG_SYS_I2C_MAX1237_ADDR             0x34
276
277 /*
278  * General PCI
279  * Memory space is mapped 1-1, but I/O space must start from 0.
280  */
281 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
282 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BUS
283 #define CONFIG_SYS_PCI1_MEM_SIZE        0x40000000      /* 1G */
284 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
285 #define CONFIG_SYS_PCI1_IO_PHYS         0xe8000000
286 #define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 1M */
287
288 /*
289  * Networking options
290  */
291 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
292 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
293 #define CONFIG_NET_MULTI        1
294 #define CONFIG_MII              1       /* MII PHY management */
295 #define CONFIG_ETHPRIME         "eTSEC1"
296
297 #define CONFIG_TSEC1            1
298 #define CONFIG_TSEC1_NAME       "eTSEC1"
299 #define TSEC1_FLAGS             TSEC_GIGABIT
300 #define TSEC1_PHY_ADDR          1
301 #define TSEC1_PHYIDX            0
302 #define CONFIG_HAS_ETH0
303
304 #define CONFIG_TSEC2            1
305 #define CONFIG_TSEC2_NAME       "eTSEC2"
306 #define TSEC2_FLAGS             TSEC_GIGABIT
307 #define TSEC2_PHY_ADDR          2
308 #define TSEC2_PHYIDX            0
309 #define CONFIG_HAS_ETH1
310
311 #define CONFIG_TSEC3    1
312 #define CONFIG_TSEC3_NAME       "eTSEC3"
313 #define TSEC3_FLAGS             TSEC_GIGABIT
314 #define TSEC3_PHY_ADDR          3
315 #define TSEC3_PHYIDX            0
316 #define CONFIG_HAS_ETH2
317
318 #define CONFIG_TSEC4    1
319 #define CONFIG_TSEC4_NAME       "eTSEC4"
320 #define TSEC4_FLAGS             TSEC_GIGABIT
321 #define TSEC4_PHY_ADDR          4
322 #define TSEC4_PHYIDX            0
323 #define CONFIG_HAS_ETH3
324
325 /*
326  * BOOTP options
327  */
328 #define CONFIG_BOOTP_BOOTFILESIZE
329 #define CONFIG_BOOTP_BOOTPATH
330 #define CONFIG_BOOTP_GATEWAY
331
332 /*
333  * Command configuration.
334  */
335 #include <config_cmd_default.h>
336
337 #define CONFIG_CMD_ASKENV
338 #define CONFIG_CMD_DATE
339 #define CONFIG_CMD_DHCP
340 #define CONFIG_CMD_EEPROM
341 #define CONFIG_CMD_ELF
342 #define CONFIG_CMD_SAVEENV
343 #define CONFIG_CMD_FLASH
344 #define CONFIG_CMD_I2C
345 #define CONFIG_CMD_JFFS2
346 #define CONFIG_CMD_MII
347 #define CONFIG_CMD_NAND
348 #define CONFIG_CMD_NET
349 #define CONFIG_CMD_PCA953X
350 #define CONFIG_CMD_PCA953X_INFO
351 #define CONFIG_CMD_PCI
352 #define CONFIG_CMD_PCI_ENUM
353 #define CONFIG_CMD_PING
354 #define CONFIG_CMD_SNTP
355 #define CONFIG_CMD_REGINFO
356
357 /*
358  * Miscellaneous configurable options
359  */
360 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
361 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
362 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
363 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
364 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
365 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
366 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
367 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
368 #define CONFIG_CMDLINE_EDITING  1               /* add command line history     */
369 #define CONFIG_AUTO_COMPLETE    1               /* add autocompletion support */
370 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
371 #define CONFIG_BOOTDELAY        3               /* -1 disables auto-boot */
372 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
373 #define CONFIG_PREBOOT                          /* enable preboot variable */
374 #define CONFIG_FIT              1
375 #define CONFIG_FIT_VERBOSE      1
376 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
377 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
378
379 /*
380  * For booting Linux, the board info and command line data
381  * have to be in the first 16 MB of memory, since this is
382  * the maximum mapped by the Linux kernel during initialization.
383  */
384 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
385 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
386
387 /*
388  * Environment Configuration
389  */
390 #define CONFIG_ENV_IS_IN_FLASH  1
391 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
392 #define CONFIG_ENV_SIZE         0x8000
393 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
394
395 /*
396  * Flash memory map:
397  * fff80000 - ffffffff     Pri U-Boot (512 KB)
398  * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
399  * fff00000 - fff3ffff     Pri FDT (256KB)
400  * fef00000 - ffefffff     Pri OS image (16MB)
401  * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
402  *
403  * fbf80000 - fbffffff     Sec U-Boot (512 KB)
404  * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
405  * fbf00000 - fbf3ffff     Sec FDT (256KB)
406  * faf00000 - fbefffff     Sec OS image (16MB)
407  * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
408  */
409 #define CONFIG_UBOOT1_ENV_ADDR  MK_STR(0xfff80000)
410 #define CONFIG_UBOOT2_ENV_ADDR  MK_STR(0xfbf80000)
411 #define CONFIG_FDT1_ENV_ADDR    MK_STR(0xfff00000)
412 #define CONFIG_FDT2_ENV_ADDR    MK_STR(0xfbf00000)
413 #define CONFIG_OS1_ENV_ADDR     MK_STR(0xfef00000)
414 #define CONFIG_OS2_ENV_ADDR     MK_STR(0xfaf00000)
415
416 #define CONFIG_PROG_UBOOT1                                              \
417         "$download_cmd $loadaddr $ubootfile; "                          \
418         "if test $? -eq 0; then "                                       \
419                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
420                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
421                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
422                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
423                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
424                 "if test $? -ne 0; then "                               \
425                         "echo PROGRAM FAILED; "                         \
426                 "else; "                                                \
427                         "echo PROGRAM SUCCEEDED; "                      \
428                 "fi; "                                                  \
429         "else; "                                                        \
430                 "echo DOWNLOAD FAILED; "                                \
431         "fi;"
432
433 #define CONFIG_PROG_UBOOT2                                              \
434         "$download_cmd $loadaddr $ubootfile; "                          \
435         "if test $? -eq 0; then "                                       \
436                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
437                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
438                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
439                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
440                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
441                 "if test $? -ne 0; then "                               \
442                         "echo PROGRAM FAILED; "                         \
443                 "else; "                                                \
444                         "echo PROGRAM SUCCEEDED; "                      \
445                 "fi; "                                                  \
446         "else; "                                                        \
447                 "echo DOWNLOAD FAILED; "                                \
448         "fi;"
449
450 #define CONFIG_BOOT_OS_NET                                              \
451         "$download_cmd $osaddr $osfile; "                               \
452         "if test $? -eq 0; then "                                       \
453                 "if test -n $fdtaddr; then "                            \
454                         "$download_cmd $fdtaddr $fdtfile; "             \
455                         "if test $? -eq 0; then "                       \
456                                 "bootm $osaddr - $fdtaddr; "            \
457                         "else; "                                        \
458                                 "echo FDT DOWNLOAD FAILED; "            \
459                         "fi; "                                          \
460                 "else; "                                                \
461                         "bootm $osaddr; "                               \
462                 "fi; "                                                  \
463         "else; "                                                        \
464                 "echo OS DOWNLOAD FAILED; "                             \
465         "fi;"
466
467 #define CONFIG_PROG_OS1                                                 \
468         "$download_cmd $osaddr $osfile; "                               \
469         "if test $? -eq 0; then "                                       \
470                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
471                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
472                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
473                 "if test $? -ne 0; then "                               \
474                         "echo OS PROGRAM FAILED; "                      \
475                 "else; "                                                \
476                         "echo OS PROGRAM SUCCEEDED; "                   \
477                 "fi; "                                                  \
478         "else; "                                                        \
479                 "echo OS DOWNLOAD FAILED; "                             \
480         "fi;"
481
482 #define CONFIG_PROG_OS2                                                 \
483         "$download_cmd $osaddr $osfile; "                               \
484         "if test $? -eq 0; then "                                       \
485                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
486                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
487                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
488                 "if test $? -ne 0; then "                               \
489                         "echo OS PROGRAM FAILED; "                      \
490                 "else; "                                                \
491                         "echo OS PROGRAM SUCCEEDED; "                   \
492                 "fi; "                                                  \
493         "else; "                                                        \
494                 "echo OS DOWNLOAD FAILED; "                             \
495         "fi;"
496
497 #define CONFIG_PROG_FDT1                                                \
498         "$download_cmd $fdtaddr $fdtfile; "                             \
499         "if test $? -eq 0; then "                                       \
500                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
501                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
502                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
503                 "if test $? -ne 0; then "                               \
504                         "echo FDT PROGRAM FAILED; "                     \
505                 "else; "                                                \
506                         "echo FDT PROGRAM SUCCEEDED; "                  \
507                 "fi; "                                                  \
508         "else; "                                                        \
509                 "echo FDT DOWNLOAD FAILED; "                            \
510         "fi;"
511
512 #define CONFIG_PROG_FDT2                                                \
513         "$download_cmd $fdtaddr $fdtfile; "                             \
514         "if test $? -eq 0; then "                                       \
515                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
516                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
517                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
518                 "if test $? -ne 0; then "                               \
519                         "echo FDT PROGRAM FAILED; "                     \
520                 "else; "                                                \
521                         "echo FDT PROGRAM SUCCEEDED; "                  \
522                 "fi; "                                                  \
523         "else; "                                                        \
524                 "echo FDT DOWNLOAD FAILED; "                            \
525         "fi;"
526
527 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
528         "autoload=yes\0"                                                \
529         "download_cmd=tftp\0"                                           \
530         "console_args=console=ttyS0,115200\0"                           \
531         "root_args=root=/dev/nfs rw\0"                                  \
532         "misc_args=ip=on\0"                                             \
533         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
534         "bootfile=/home/user/file\0"                                    \
535         "osfile=/home/user/board.uImage\0"                              \
536         "fdtfile=/home/user/board.dtb\0"                                \
537         "ubootfile=/home/user/u-boot.bin\0"                             \
538         "fdtaddr=c00000\0"                                              \
539         "osaddr=0x1000000\0"                                            \
540         "loadaddr=0x1000000\0"                                          \
541         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
542         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
543         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
544         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
545         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
546         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
547         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
548         "bootcmd_flash1=run set_bootargs; "                             \
549                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
550         "bootcmd_flash2=run set_bootargs; "                             \
551                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
552         "bootcmd=run bootcmd_flash1\0"
553 #endif  /* __CONFIG_H */