include/configs/xpedite517x.h

   1 /*
   2  * Copyright 2009 Extreme Engineering Solutions, Inc.
   3  * Copyright 2007-2008 Freescale Semiconductor, Inc.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * xpedite517x board configuration file
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * High Level Configuration Options
  16  */
  17 #define CONFIG_MPC86xx          1       /* MPC86xx */
  18 #define CONFIG_MPC8641          1       /* MPC8641 specific */
  19 #define CONFIG_XPEDITE5140      1       /* MPC8641HPCN board specific */
  20 #define CONFIG_SYS_BOARD_NAME   "XPedite5170"
  21 #define CONFIG_SYS_FORM_3U_VPX  1
  22 #define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
  23 #define CONFIG_BOARD_EARLY_INIT_R       /* Call board_pre_init */
  24 #define CONFIG_BAT_RW           1       /* Use common BAT rw code */
  25 #define CONFIG_HIGH_BATS        1       /* High BATs supported and enabled */
  26 #define CONFIG_ALTIVEC          1
  27
  28 #define CONFIG_SYS_TEXT_BASE    0xfff00000
  29
  30 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  31 #define CONFIG_PCI_PNP          1       /* do pci plug-and-play */
  32 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
  33 #define CONFIG_PCIE1            1       /* PCIE controler 1 */
  34 #define CONFIG_PCIE2            1       /* PCIE controler 2 */
  35 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  36 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  37 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  38 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  39
  40 /*
  41  * DDR config
  42  */
  43 #define CONFIG_FSL_DDR2
  44 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  45 #define CONFIG_DDR_SPD
  46 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  47 #define SPD_EEPROM_ADDRESS1             0x54    /* Both channels use the */
  48 #define SPD_EEPROM_ADDRESS2             0x54    /* same SPD data         */
  49 #define SPD_EEPROM_OFFSET               0x200   /* OFFSET of SPD in EEPROM */
  50 #define CONFIG_NUM_DDR_CONTROLLERS      2
  51 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  52 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  53 #define CONFIG_DDR_ECC
  54 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  55 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000      /* DDR is system memory*/
  56 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  57 #define CONFIG_VERY_BIG_RAM
  58 #define CONFIG_SYS_MAX_DDR_BAT_SIZE     0x80000000      /* BAT mapping size */
  59
  60 /*
  61  * virtual address to be used for temporary mappings.  There
  62  * should be 128k free at this VA.
  63  */
  64 #define CONFIG_SYS_SCRATCH_VA   0xe0000000
  65
  66 #ifndef __ASSEMBLY__
  67 extern unsigned long get_board_sys_clk(unsigned long dummy);
  68 #endif
  69
  70 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0) /* sysclk for MPC86xx */
  71
  72 /*
  73  * L2CR setup
  74  */
  75 #define CONFIG_SYS_L2
  76 #define L2_INIT         0
  77 #define L2_ENABLE       (L2CR_L2E)
  78
  79 /*
  80  * Base addresses -- Note these are effective addresses where the
  81  * actual resources get mapped (not physical addresses)
  82  */
  83 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
  84 #define CONFIG_SYS_CCSRBAR              0xef000000      /* relocated CCSRBAR */
  85 #define CONFIG_SYS_CCSRBAR_PHYS         CONFIG_SYS_CCSRBAR
  86 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  87 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH    0x0
  88 #define CONFIG_SYS_IMMR                 CONFIG_SYS_CCSRBAR
  89
  90 /*
  91  * Diagnostics
  92  */
  93 #define CONFIG_SYS_ALT_MEMTEST
  94 #define CONFIG_SYS_MEMTEST_START        0x10000000
  95 #define CONFIG_SYS_MEMTEST_END          0x20000000
  96 #define CONFIG_POST                     (CONFIG_SYS_POST_MEMORY |\
  97                                          CONFIG_SYS_POST_I2C)
  98 #define I2C_ADDR_LIST                   {CONFIG_SYS_I2C_DS1621_ADDR,    \
  99                                          CONFIG_SYS_I2C_DS4510_ADDR,    \
 100                                          CONFIG_SYS_I2C_EEPROM_ADDR,    \
 101                                          CONFIG_SYS_I2C_LM90_ADDR,      \
 102                                          CONFIG_SYS_I2C_PCA9553_ADDR,   \
 103                                          CONFIG_SYS_I2C_PCA953X_ADDR0,  \
 104                                          CONFIG_SYS_I2C_PCA953X_ADDR1,  \
 105                                          CONFIG_SYS_I2C_PCA953X_ADDR2,  \
 106                                          CONFIG_SYS_I2C_PCA953X_ADDR3,  \
 107                                          CONFIG_SYS_I2C_PEX8518_ADDR,   \
 108                                          CONFIG_SYS_I2C_RTC_ADDR}
 109 /* The XPedite5170 can host an XMC which has an EEPROM at address 0x50 */
 110 #define I2C_ADDR_IGNORE_LIST            {0x50}
 111
 112 /*
 113  * Memory map
 114  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 115  * 0x8000_0000  0xbfff_ffff     PCIe1 Mem               1G non-cacheable
 116  * 0xc000_0000  0xcfff_ffff     PCIe2 Mem               256M non-cacheable
 117  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
 118  * 0xe800_0000  0xe87f_ffff     PCIe1 IO                8M non-cacheable
 119  * 0xe880_0000  0xe8ff_ffff     PCIe2 IO                8M non-cacheable
 120  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
 121  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
 122  * 0xf000_0000  0xf7ff_ffff     NOR Flash 2             128M non-cacheable
 123  * 0xf800_0000  0xffff_ffff     NOR Flash 1             128M non-cacheable
 124  */
 125
 126 #define CONFIG_SYS_LBC_LCRR             (LCRR_CLKDIV_4 | LCRR_EADC_3)
 127
 128 /*
 129  * NAND flash configuration
 130  */
 131 #define CONFIG_SYS_NAND_BASE            0xef800000
 132 #define CONFIG_SYS_NAND_BASE2           0xef840000      /* Unused at this time */
 133 #define CONFIG_SYS_NAND_BASE_LIST       {CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE2}
 134 #define CONFIG_SYS_MAX_NAND_DEVICE      2
 135 #define CONFIG_NAND_ACTL
 136 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 14)       /* C_LA14 */
 137 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 15)       /* C_LA15 */
 138 #define CONFIG_SYS_NAND_ACTL_NCE        0               /* NCE not controlled by ADDR */
 139 #define CONFIG_SYS_NAND_ACTL_DELAY      25
 140 #define CONFIG_SYS_NAND_QUIET_TEST
 141 #define CONFIG_JFFS2_NAND
 142
 143 /*
 144  * NOR flash configuration
 145  */
 146 #define CONFIG_SYS_FLASH_BASE           0xf8000000
 147 #define CONFIG_SYS_FLASH_BASE2          0xf0000000
 148 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
 149 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 150 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 151 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 152 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 153 #define CONFIG_FLASH_CFI_DRIVER
 154 #define CONFIG_SYS_FLASH_CFI
 155 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 156 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff00000, 0xc0000}, \
 157                                                   {0xf7f00000, 0xc0000} }
 158 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 159 #define CONFIG_SYS_MONITOR_BASE_EARLY   0xfff00000      /* early monitor loc */
 160
 161 /*
 162  * Chip select configuration
 163  */
 164 /* NOR Flash 0 on CS0 */
 165 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  |\
 166                                  BR_PS_16               |\
 167                                  BR_V)
 168 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_128MB            |\
 169                                  OR_GPCM_CSNT           |\
 170                                  OR_GPCM_XACS           |\
 171                                  OR_GPCM_ACS_DIV2       |\
 172                                  OR_GPCM_SCY_8          |\
 173                                  OR_GPCM_TRLX           |\
 174                                  OR_GPCM_EHTR           |\
 175                                  OR_GPCM_EAD)
 176
 177 /* NOR Flash 1 on CS1 */
 178 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 |\
 179                                  BR_PS_16               |\
 180                                  BR_V)
 181 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 182
 183 /* NAND flash on CS2 */
 184 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   |\
 185                                  BR_PS_8                |\
 186                                  BR_V)
 187 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            |\
 188                                  OR_GPCM_BCTLD          |\
 189                                  OR_GPCM_CSNT           |\
 190                                  OR_GPCM_ACS_DIV4       |\
 191                                  OR_GPCM_SCY_4          |\
 192                                  OR_GPCM_TRLX           |\
 193                                  OR_GPCM_EHTR)
 194
 195 /* Optional NAND flash on CS3 */
 196 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  |\
 197                                  BR_PS_8                |\
 198                                  BR_V)
 199 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 200
 201 /*
 202  * Use L1 as initial stack
 203  */
 204 #define CONFIG_SYS_INIT_RAM_LOCK        1
 205 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
 206 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 207
 208 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 209 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 210
 211 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
 212 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 213
 214 /*
 215  * Serial Port
 216  */
 217 #define CONFIG_CONS_INDEX               1
 218 #define CONFIG_SYS_NS16550
 219 #define CONFIG_SYS_NS16550_SERIAL
 220 #define CONFIG_SYS_NS16550_REG_SIZE     1
 221 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 222 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 223 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 224 #define CONFIG_SYS_BAUDRATE_TABLE       \
 225         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 226 #define CONFIG_BAUDRATE                 115200
 227 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 228 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 229
 230 /*
 231  * Use the HUSH parser
 232  */
 233 #define CONFIG_SYS_HUSH_PARSER
 234
 235 /*
 236  * Pass open firmware flat tree
 237  */
 238 #define CONFIG_OF_LIBFDT                1
 239 #define CONFIG_OF_BOARD_SETUP           1
 240 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 241
 242 /*
 243  * I2C
 244  */
 245 #define CONFIG_SYS_I2C
 246 #define CONFIG_SYS_I2C_FSL
 247 #define CONFIG_SYS_FSL_I2C_SPEED        100000
 248 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 249 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 250 #define CONFIG_SYS_FSL_I2C2_SPEED       100000
 251 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 252 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 253
 254 /* PEX8518 slave I2C interface */
 255 #define CONFIG_SYS_I2C_PEX8518_ADDR     0x70
 256
 257 /* I2C DS1631 temperature sensor */
 258 #define CONFIG_SYS_I2C_DS1621_ADDR      0x48
 259 #define CONFIG_DTT_DS1621
 260 #define CONFIG_DTT_SENSORS              { 0 }
 261 #define CONFIG_SYS_I2C_LM90_ADDR        0x4c
 262
 263 /* I2C EEPROM - AT24C128B */
 264 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x54
 265 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 266 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
 267 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
 268
 269 /* I2C RTC */
 270 #define CONFIG_RTC_M41T11               1
 271 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 272 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 273
 274 /* GPIO/EEPROM/SRAM */
 275 #define CONFIG_DS4510
 276 #define CONFIG_SYS_I2C_DS4510_ADDR      0x51
 277
 278 /* GPIO */
 279 #define CONFIG_PCA953X
 280 #define CONFIG_SYS_I2C_PCA953X_ADDR0    0x18
 281 #define CONFIG_SYS_I2C_PCA953X_ADDR1    0x1c
 282 #define CONFIG_SYS_I2C_PCA953X_ADDR2    0x1e
 283 #define CONFIG_SYS_I2C_PCA953X_ADDR3    0x1f
 284 #define CONFIG_SYS_I2C_PCA953X_ADDR     CONFIG_SYS_I2C_PCA953X_ADDR0
 285 #define CONFIG_SYS_I2C_PCA9553_ADDR     0x62
 286
 287 /*
 288  * PU = pulled high, PD = pulled low
 289  * I = input, O = output, IO = input/output
 290  */
 291 /* PCA9557 @ 0x18*/
 292 #define CONFIG_SYS_PCA953X_C0_SER0_EN           0x01 /* PU; UART0 enable (1: enabled) */
 293 #define CONFIG_SYS_PCA953X_C0_SER0_MODE         0x02 /* PU; UART0 serial mode select */
 294 #define CONFIG_SYS_PCA953X_C0_SER1_EN           0x04 /* PU; UART1 enable (1: enabled) */
 295 #define CONFIG_SYS_PCA953X_C0_SER1_MODE         0x08 /* PU; UART1 serial mode select */
 296 #define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS     0x10 /* PU; Boot flash CS select */
 297 #define CONFIG_SYS_PCA953X_NVM_WP               0x20 /* PU; Set to 0 to enable NVM writing */
 298
 299 /* PCA9557 @ 0x1c*/
 300 #define CONFIG_SYS_PCA953X_XMC0_ROOT0           0x01 /* PU; Low if XMC is RC */
 301 #define CONFIG_SYS_PCA953X_PLUG_GPIO0           0x02 /* Samtec connector GPIO */
 302 #define CONFIG_SYS_PCA953X_XMC0_WAKE            0x04 /* PU; XMC wake */
 303 #define CONFIG_SYS_PCA953X_XMC0_BIST            0x08 /* PU; XMC built in self test */
 304 #define CONFIG_SYS_PCA953X_XMC_PRESENT          0x10 /* PU; Low if XMC module installed */
 305 #define CONFIG_SYS_PCA953X_PMC_PRESENT          0x20 /* PU; Low if PMC module installed */
 306 #define CONFIG_SYS_PCA953X_PMC0_MONARCH         0x40 /* PMC monarch mode enable */
 307 #define CONFIG_SYS_PCA953X_PMC0_EREADY          0x80 /* PU; PMC PCI eready */
 308
 309 /* PCA9557 @ 0x1e*/
 310 #define CONFIG_SYS_PCA953X_P0_GA0               0x01 /* PU; VPX Geographical address */
 311 #define CONFIG_SYS_PCA953X_P0_GA1               0x02 /* PU; VPX Geographical address */
 312 #define CONFIG_SYS_PCA953X_P0_GA2               0x04 /* PU; VPX Geographical address */
 313 #define CONFIG_SYS_PCA953X_P0_GA3               0x08 /* PU; VPX Geographical address */
 314 #define CONFIG_SYS_PCA953X_P0_GA4               0x10 /* PU; VPX Geographical address */
 315 #define CONFIG_SYS_PCA953X_P0_GAP               0x20 /* PU; VPX Geographical address parity */
 316 #define CONFIG_SYS_PCA953X_P1_SYSEN             0x80 /* PU; VPX P1 SYSCON */
 317
 318 /* PCA9557 @ 0x1f */
 319 #define CONFIG_SYS_PCA953X_VPX_GPIO0            0x01 /* PU; VPX P15 GPIO */
 320 #define CONFIG_SYS_PCA953X_VPX_GPIO1            0x02 /* PU; VPX P15 GPIO */
 321 #define CONFIG_SYS_PCA953X_VPX_GPIO2            0x04 /* PU; VPX P15 GPIO */
 322 #define CONFIG_SYS_PCA953X_VPX_GPIO3            0x08 /* PU; VPX P15 GPIO */
 323
 324 /*
 325  * General PCI
 326  * Memory space is mapped 1-1, but I/O space must start from 0.
 327  */
 328 /* PCIE1 - PEX8518 */
 329 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 330 #define CONFIG_SYS_PCIE1_MEM_PHYS       CONFIG_SYS_PCIE1_MEM_BUS
 331 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x40000000      /* 1G */
 332 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 333 #define CONFIG_SYS_PCIE1_IO_PHYS        0xe8000000
 334 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000      /* 8M */
 335
 336 /* PCIE2 - VPX P1 */
 337 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 338 #define CONFIG_SYS_PCIE2_MEM_PHYS       CONFIG_SYS_PCIE2_MEM_BUS
 339 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 340 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 341 #define CONFIG_SYS_PCIE2_IO_PHYS        0xe8800000
 342 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00800000      /* 8M */
 343
 344 /*
 345  * Networking options
 346  */
 347 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
 348 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 349 #define CONFIG_MII              1       /* MII PHY management */
 350 #define CONFIG_ETHPRIME         "eTSEC1"
 351
 352 #define CONFIG_TSEC1            1
 353 #define CONFIG_TSEC1_NAME       "eTSEC1"
 354 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 355 #define TSEC1_PHY_ADDR          1
 356 #define TSEC1_PHYIDX            0
 357 #define CONFIG_HAS_ETH0
 358
 359 #define CONFIG_TSEC2            1
 360 #define CONFIG_TSEC2_NAME       "eTSEC2"
 361 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 362 #define TSEC2_PHY_ADDR          2
 363 #define TSEC2_PHYIDX            0
 364 #define CONFIG_HAS_ETH1
 365
 366 /*
 367  * BAT mappings
 368  */
 369 #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
 370 #define CONFIG_SYS_CCSR_DEFAULT_DBATL   (CONFIG_SYS_CCSRBAR_DEFAULT     |\
 371                                          BATL_PP_RW                     |\
 372                                          BATL_CACHEINHIBIT              |\
 373                                          BATL_GUARDEDSTORAGE)
 374 #define CONFIG_SYS_CCSR_DEFAULT_DBATU   (CONFIG_SYS_CCSRBAR_DEFAULT     |\
 375                                          BATU_BL_1M                     |\
 376                                          BATU_VS                        |\
 377                                          BATU_VP)
 378 #define CONFIG_SYS_CCSR_DEFAULT_IBATL   (CONFIG_SYS_CCSRBAR_DEFAULT     |\
 379                                          BATL_PP_RW                     |\
 380                                          BATL_CACHEINHIBIT)
 381 #define CONFIG_SYS_CCSR_DEFAULT_IBATU   CONFIG_SYS_CCSR_DEFAULT_DBATU
 382 #endif
 383
 384 /*
 385  * BAT0         2G      Cacheable, non-guarded
 386  * 0x0000_0000  2G      DDR
 387  */
 388 #define CONFIG_SYS_DBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE)
 389 #define CONFIG_SYS_DBAT0U       (BATU_BL_2G | BATU_VS | BATU_VP)
 390 #define CONFIG_SYS_IBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE)
 391 #define CONFIG_SYS_IBAT0U       CONFIG_SYS_DBAT0U
 392
 393 /*
 394  * BAT1         1G      Cache-inhibited, guarded
 395  * 0x8000_0000  1G      PCI-Express 1 Memory
 396  */
 397 #define CONFIG_SYS_DBAT1L       (CONFIG_SYS_PCIE1_MEM_PHYS      |\
 398                                  BATL_PP_RW                     |\
 399                                  BATL_CACHEINHIBIT              |\
 400                                  BATL_GUARDEDSTORAGE)
 401 #define CONFIG_SYS_DBAT1U       (CONFIG_SYS_PCIE1_MEM_PHYS      |\
 402                                  BATU_BL_1G                     |\
 403                                  BATU_VS                        |\
 404                                  BATU_VP)
 405 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCIE1_MEM_PHYS      |\
 406                                  BATL_PP_RW                     |\
 407                                  BATL_CACHEINHIBIT)
 408 #define CONFIG_SYS_IBAT1U       CONFIG_SYS_DBAT1U
 409
 410 /*
 411  * BAT2         512M    Cache-inhibited, guarded
 412  * 0xc000_0000  512M    PCI-Express 2 Memory
 413  */
 414 #define CONFIG_SYS_DBAT2L       (CONFIG_SYS_PCIE2_MEM_PHYS      |\
 415                                  BATL_PP_RW                     |\
 416                                  BATL_CACHEINHIBIT              |\
 417                                  BATL_GUARDEDSTORAGE)
 418 #define CONFIG_SYS_DBAT2U       (CONFIG_SYS_PCIE2_MEM_PHYS      |\
 419                                  BATU_BL_512M                   |\
 420                                  BATU_VS                        |\
 421                                  BATU_VP)
 422 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCIE2_MEM_PHYS      |\
 423                                  BATL_PP_RW                     |\
 424                                  BATL_CACHEINHIBIT)
 425 #define CONFIG_SYS_IBAT2U       CONFIG_SYS_DBAT2U
 426
 427 /*
 428  * BAT3         1M      Cache-inhibited, guarded
 429  * 0xe000_0000  1M      CCSR
 430  */
 431 #define CONFIG_SYS_DBAT3L       (CONFIG_SYS_CCSRBAR             |\
 432                                  BATL_PP_RW                     |\
 433                                  BATL_CACHEINHIBIT              |\
 434                                  BATL_GUARDEDSTORAGE)
 435 #define CONFIG_SYS_DBAT3U       (CONFIG_SYS_CCSRBAR             |\
 436                                  BATU_BL_1M                     |\
 437                                  BATU_VS                        |\
 438                                  BATU_VP)
 439 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_CCSRBAR             |\
 440                                  BATL_PP_RW                     |\
 441                                  BATL_CACHEINHIBIT)
 442 #define CONFIG_SYS_IBAT3U       CONFIG_SYS_DBAT3U
 443
 444 /*
 445  * BAT4         32M     Cache-inhibited, guarded
 446  * 0xe200_0000  16M     PCI-Express 1 I/O
 447  * 0xe300_0000  16M     PCI-Express 2 I/0
 448  */
 449 #define CONFIG_SYS_DBAT4L       (CONFIG_SYS_PCIE1_IO_PHYS       |\
 450                                  BATL_PP_RW                     |\
 451                                  BATL_CACHEINHIBIT              |\
 452                                  BATL_GUARDEDSTORAGE)
 453 #define CONFIG_SYS_DBAT4U       (CONFIG_SYS_PCIE1_IO_PHYS       |\
 454                                  BATU_BL_32M                    |\
 455                                  BATU_VS                        |\
 456                                  BATU_VP)
 457 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCIE1_IO_PHYS       |\
 458                                  BATL_PP_RW                     |\
 459                                  BATL_CACHEINHIBIT)
 460 #define CONFIG_SYS_IBAT4U       CONFIG_SYS_DBAT4U
 461
 462 /*
 463  * BAT5         128K    Cacheable, non-guarded
 464  * 0xe400_1000  128K    Init RAM for stack in the CPU DCache (no backing memory)
 465  */
 466 #define CONFIG_SYS_DBAT5L       (CONFIG_SYS_INIT_RAM_ADDR       |\
 467                                  BATL_PP_RW                     |\
 468                                  BATL_MEMCOHERENCE)
 469 #define CONFIG_SYS_DBAT5U       (CONFIG_SYS_INIT_RAM_ADDR       |\
 470                                  BATU_BL_128K                   |\
 471                                  BATU_VS                        |\
 472                                  BATU_VP)
 473 #define CONFIG_SYS_IBAT5L       CONFIG_SYS_DBAT5L
 474 #define CONFIG_SYS_IBAT5U       CONFIG_SYS_DBAT5U
 475
 476 /*
 477  * BAT6         256M    Cache-inhibited, guarded
 478  * 0xf000_0000  256M    FLASH
 479  */
 480 #define CONFIG_SYS_DBAT6L       (CONFIG_SYS_FLASH_BASE2         |\
 481                                  BATL_PP_RW                     |\
 482                                  BATL_CACHEINHIBIT              |\
 483                                  BATL_GUARDEDSTORAGE)
 484 #define CONFIG_SYS_DBAT6U       (CONFIG_SYS_FLASH_BASE          |\
 485                                  BATU_BL_256M                   |\
 486                                  BATU_VS                        |\
 487                                  BATU_VP)
 488 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_FLASH_BASE          |\
 489                                  BATL_PP_RW                     |\
 490                                  BATL_MEMCOHERENCE)
 491 #define CONFIG_SYS_IBAT6U       CONFIG_SYS_DBAT6U
 492
 493 /* Map the last 1M of flash where we're running from reset */
 494 #define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY  |\
 495                                  BATL_PP_RW                     |\
 496                                  BATL_CACHEINHIBIT              |\
 497                                  BATL_GUARDEDSTORAGE)
 498 #define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE                   |\
 499                                  BATU_BL_1M                     |\
 500                                  BATU_VS                        |\
 501                                  BATU_VP)
 502 #define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY  |\
 503                                  BATL_PP_RW                     |\
 504                                  BATL_MEMCOHERENCE)
 505 #define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY
 506
 507 /*
 508  * BAT7         64M     Cache-inhibited, guarded
 509  * 0xe800_0000  64K     NAND FLASH
 510  * 0xe804_0000  128K    DUART Registers
 511  */
 512 #define CONFIG_SYS_DBAT7L       (CONFIG_SYS_NAND_BASE           |\
 513                                  BATL_PP_RW                     |\
 514                                  BATL_CACHEINHIBIT              |\
 515                                  BATL_GUARDEDSTORAGE)
 516 #define CONFIG_SYS_DBAT7U       (CONFIG_SYS_NAND_BASE           |\
 517                                  BATU_BL_512K                   |\
 518                                  BATU_VS                        |\
 519                                  BATU_VP)
 520 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_NAND_BASE           |\
 521                                  BATL_PP_RW                     |\
 522                                  BATL_CACHEINHIBIT)
 523 #define CONFIG_SYS_IBAT7U       CONFIG_SYS_DBAT7U
 524
 525 /*
 526  * Command configuration.
 527  */
 528 #include <config_cmd_default.h>
 529
 530 #define CONFIG_CMD_ASKENV
 531 #define CONFIG_CMD_DATE
 532 #define CONFIG_CMD_DHCP
 533 #define CONFIG_CMD_DS4510
 534 #define CONFIG_CMD_DS4510_INFO
 535 #define CONFIG_CMD_DTT
 536 #define CONFIG_CMD_EEPROM
 537 #define CONFIG_CMD_ELF
 538 #define CONFIG_CMD_SAVEENV
 539 #define CONFIG_CMD_FLASH
 540 #define CONFIG_CMD_I2C
 541 #define CONFIG_CMD_IRQ
 542 #define CONFIG_CMD_JFFS2
 543 #define CONFIG_CMD_MII
 544 #define CONFIG_CMD_NAND
 545 #define CONFIG_CMD_NET
 546 #define CONFIG_CMD_PCA953X
 547 #define CONFIG_CMD_PCA953X_INFO
 548 #define CONFIG_CMD_PCI
 549 #define CONFIG_CMD_PCI_ENUM
 550 #define CONFIG_CMD_PING
 551 #define CONFIG_CMD_REGINFO
 552 #define CONFIG_CMD_SNTP
 553
 554 /*
 555  * Miscellaneous configurable options
 556  */
 557 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 558 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 559 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 560 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 561 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 562 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 563 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 564 #define CONFIG_CMDLINE_EDITING  1               /* Command-line editing */
 565 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
 566 #define CONFIG_BOOTDELAY        3               /* -1 disables auto-boot */
 567 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
 568 #define CONFIG_PREBOOT                          /* enable preboot variable */
 569 #define CONFIG_FIT              1
 570 #define CONFIG_FIT_VERBOSE      1
 571 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 572
 573 /*
 574  * For booting Linux, the board info and command line data
 575  * have to be in the first 16 MB of memory, since this is
 576  * the maximum mapped by the Linux kernel during initialization.
 577  */
 578 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 579 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
 580
 581 /*
 582  * Environment Configuration
 583  */
 584 #define CONFIG_ENV_IS_IN_FLASH  1
 585 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
 586 #define CONFIG_ENV_SIZE         0x8000
 587 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 588
 589 /*
 590  * Flash memory map:
 591  * fffc0000 - ffffffff  Pri FDT (256KB)
 592  * fff80000 - fffbffff  Pri U-Boot Environment (256 KB)
 593  * fff00000 - fff7ffff  Pri U-Boot (512 KB)
 594  * fef00000 - ffefffff  Pri OS image (16MB)
 595  * f8000000 - feefffff  Pri OS Use/Filesystem (111MB)
 596  *
 597  * f7fc0000 - f7ffffff  Sec FDT (256KB)
 598  * f7f80000 - f7fbffff  Sec U-Boot Environment (256 KB)
 599  * f7f00000 - f7f7ffff  Sec U-Boot (512 KB)
 600  * f6f00000 - f7efffff  Sec OS image (16MB)
 601  * f0000000 - f6efffff  Sec OS Use/Filesystem (111MB)
 602  */
 603 #define CONFIG_UBOOT1_ENV_ADDR  __stringify(0xfff00000)
 604 #define CONFIG_UBOOT2_ENV_ADDR  __stringify(0xf7f00000)
 605 #define CONFIG_FDT1_ENV_ADDR    __stringify(0xfffc0000)
 606 #define CONFIG_FDT2_ENV_ADDR    __stringify(0xf7fc0000)
 607 #define CONFIG_OS1_ENV_ADDR     __stringify(0xfef00000)
 608 #define CONFIG_OS2_ENV_ADDR     __stringify(0xf6f00000)
 609
 610 #define CONFIG_PROG_UBOOT1                                              \
 611         "$download_cmd $loadaddr $ubootfile; "                          \
 612         "if test $? -eq 0; then "                                       \
 613                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
 614                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
 615                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
 616                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
 617                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
 618                 "if test $? -ne 0; then "                               \
 619                         "echo PROGRAM FAILED; "                         \
 620                 "else; "                                                \
 621                         "echo PROGRAM SUCCEEDED; "                      \
 622                 "fi; "                                                  \
 623         "else; "                                                        \
 624                 "echo DOWNLOAD FAILED; "                                \
 625         "fi;"
 626
 627 #define CONFIG_PROG_UBOOT2                                              \
 628         "$download_cmd $loadaddr $ubootfile; "                          \
 629         "if test $? -eq 0; then "                                       \
 630                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
 631                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
 632                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
 633                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
 634                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
 635                 "if test $? -ne 0; then "                               \
 636                         "echo PROGRAM FAILED; "                         \
 637                 "else; "                                                \
 638                         "echo PROGRAM SUCCEEDED; "                      \
 639                 "fi; "                                                  \
 640         "else; "                                                        \
 641                 "echo DOWNLOAD FAILED; "                                \
 642         "fi;"
 643
 644 #define CONFIG_BOOT_OS_NET                                              \
 645         "$download_cmd $osaddr $osfile; "                               \
 646         "if test $? -eq 0; then "                                       \
 647                 "if test -n $fdtaddr; then "                            \
 648                         "$download_cmd $fdtaddr $fdtfile; "             \
 649                         "if test $? -eq 0; then "                       \
 650                                 "bootm $osaddr - $fdtaddr; "            \
 651                         "else; "                                        \
 652                                 "echo FDT DOWNLOAD FAILED; "            \
 653                         "fi; "                                          \
 654                 "else; "                                                \
 655                         "bootm $osaddr; "                               \
 656                 "fi; "                                                  \
 657         "else; "                                                        \
 658                 "echo OS DOWNLOAD FAILED; "                             \
 659         "fi;"
 660
 661 #define CONFIG_PROG_OS1                                                 \
 662         "$download_cmd $osaddr $osfile; "                               \
 663         "if test $? -eq 0; then "                                       \
 664                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
 665                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
 666                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
 667                 "if test $? -ne 0; then "                               \
 668                         "echo OS PROGRAM FAILED; "                      \
 669                 "else; "                                                \
 670                         "echo OS PROGRAM SUCCEEDED; "                   \
 671                 "fi; "                                                  \
 672         "else; "                                                        \
 673                 "echo OS DOWNLOAD FAILED; "                             \
 674         "fi;"
 675
 676 #define CONFIG_PROG_OS2                                                 \
 677         "$download_cmd $osaddr $osfile; "                               \
 678         "if test $? -eq 0; then "                                       \
 679                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
 680                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
 681                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
 682                 "if test $? -ne 0; then "                               \
 683                         "echo OS PROGRAM FAILED; "                      \
 684                 "else; "                                                \
 685                         "echo OS PROGRAM SUCCEEDED; "                   \
 686                 "fi; "                                                  \
 687         "else; "                                                        \
 688                 "echo OS DOWNLOAD FAILED; "                             \
 689         "fi;"
 690
 691 #define CONFIG_PROG_FDT1                                                \
 692         "$download_cmd $fdtaddr $fdtfile; "                             \
 693         "if test $? -eq 0; then "                                       \
 694                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
 695                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
 696                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
 697                 "if test $? -ne 0; then "                               \
 698                         "echo FDT PROGRAM FAILED; "                     \
 699                 "else; "                                                \
 700                         "echo FDT PROGRAM SUCCEEDED; "                  \
 701                 "fi; "                                                  \
 702         "else; "                                                        \
 703                 "echo FDT DOWNLOAD FAILED; "                            \
 704         "fi;"
 705
 706 #define CONFIG_PROG_FDT2                                                \
 707         "$download_cmd $fdtaddr $fdtfile; "                             \
 708         "if test $? -eq 0; then "                                       \
 709                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
 710                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
 711                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
 712                 "if test $? -ne 0; then "                               \
 713                         "echo FDT PROGRAM FAILED; "                     \
 714                 "else; "                                                \
 715                         "echo FDT PROGRAM SUCCEEDED; "                  \
 716                 "fi; "                                                  \
 717         "else; "                                                        \
 718                 "echo FDT DOWNLOAD FAILED; "                            \
 719         "fi;"
 720
 721 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 722         "autoload=yes\0"                                                \
 723         "download_cmd=tftp\0"                                           \
 724         "console_args=console=ttyS0,115200\0"                           \
 725         "root_args=root=/dev/nfs rw\0"                                  \
 726         "misc_args=ip=on\0"                                             \
 727         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 728         "bootfile=/home/user/file\0"                                    \
 729         "osfile=/home/user/board.uImage\0"                              \
 730         "fdtfile=/home/user/board.dtb\0"                                \
 731         "ubootfile=/home/user/u-boot.bin\0"                             \
 732         "fdtaddr=c00000\0"                                              \
 733         "osaddr=0x1000000\0"                                            \
 734         "loadaddr=0x1000000\0"                                          \
 735         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
 736         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
 737         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
 738         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
 739         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
 740         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
 741         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 742         "bootcmd_flash1=run set_bootargs; "                             \
 743                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
 744         "bootcmd_flash2=run set_bootargs; "                             \
 745                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
 746         "bootcmd=run bootcmd_flash1\0"
 747 #endif  /* __CONFIG_H */