2 * Configuation settings for the WB45N CPU Module.
4 * SPDX-License-Identifier: GPL-2.0+
10 #include <asm/hardware.h>
12 #define CONFIG_SYS_TEXT_BASE 0x23f00000
14 /* ARM asynchronous clock */
15 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768
16 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
18 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
19 #define CONFIG_SETUP_MEMORY_TAGS
20 #define CONFIG_INITRD_TAG
21 #define CONFIG_SKIP_LOWLEVEL_INIT
23 /* general purpose I/O */
24 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
25 #define CONFIG_AT91_GPIO
28 #define CONFIG_ATMEL_USART
29 #define CONFIG_USART_BASE ATMEL_BASE_DBGU
30 #define CONFIG_USART_ID ATMEL_ID_SYS
35 #define CONFIG_BOOTP_BOOTFILESIZE
36 #define CONFIG_BOOTP_BOOTPATH
37 #define CONFIG_BOOTP_GATEWAY
38 #define CONFIG_BOOTP_HOSTNAME
41 #define CONFIG_NR_DRAM_BANKS 1
42 #define CONFIG_SYS_SDRAM_BASE 0x20000000
43 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 MB */
45 #define CONFIG_SYS_INIT_SP_ADDR \
46 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
49 #define CONFIG_NAND_ATMEL
50 #define CONFIG_SYS_MAX_NAND_DEVICE 1
51 #define CONFIG_SYS_NAND_BASE 0x40000000
53 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
55 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
56 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4
57 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5
59 /* PMECC & PMERRLOC */
60 #define CONFIG_ATMEL_NAND_HWECC 1
61 #define CONFIG_ATMEL_NAND_HW_PMECC 1
62 #define CONFIG_PMECC_CAP 4
63 #define CONFIG_PMECC_SECTOR_SIZE 512
65 #define CONFIG_MTD_DEVICE
66 #define CONFIG_CMD_MTDPARTS
67 #define CONFIG_MTD_PARTITIONS
74 #define CONFIG_NET_RETRY_COUNT 20
75 #define CONFIG_MACB_SEARCH_PHY
76 #define CONFIG_ETHADDR C0:EE:40:00:00:00
77 #define CONFIG_ENV_OVERWRITE 1
80 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
81 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
82 #define CONFIG_SYS_MEMTEST_END 0x23e00000
84 #ifdef CONFIG_SYS_USE_NANDFLASH
85 /* bootstrap + u-boot + env + linux in nandflash */
86 #define CONFIG_ENV_OFFSET 0xa0000
87 #define CONFIG_ENV_OFFSET_REDUND 0xc0000
88 #define CONFIG_ENV_SIZE 0x20000 /* 1 block = 128 kB */
90 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xe0000 0x280000; " \
93 #define MTDIDS_DEFAULT "nand0=atmel_nand"
94 #define MTDPARTS_DEFAULT "mtdparts=atmel_nand:" \
101 "38912K(rootfs-a)," \
102 "38912K(rootfs-b)," \
107 #error No boot method selected, please select 'CONFIG_SYS_USE_NANDFLASH'
110 #define CONFIG_BOOTARGS "console=ttyS0,115200 earlyprintk " \
111 "rw noinitrd mem=64M " \
112 "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=6"
114 #define CONFIG_EXTRA_ENV_SETTINGS \
115 "_mtd=mtdparts default; setenv bootargs ${bootargs} ${mtdparts}\0" \
118 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
121 #define CONFIG_SYS_CBSIZE 256
122 #define CONFIG_SYS_MAXARGS 16
123 #define CONFIG_SYS_LONGHELP
124 #define CONFIG_CMDLINE_EDITING
125 #define CONFIG_AUTO_COMPLETE
128 * Size of malloc() pool
130 #define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000)
133 #define CONFIG_SPL_FRAMEWORK
134 #define CONFIG_SPL_TEXT_BASE 0x300000
135 #define CONFIG_SPL_MAX_SIZE 0x6000
136 #define CONFIG_SPL_STACK 0x308000
138 #define CONFIG_SPL_BSS_START_ADDR 0x20000000
139 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
140 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000
141 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
143 #define CONFIG_SYS_MONITOR_LEN (512 << 10)
145 #define CONFIG_SYS_MASTER_CLOCK 132096000
146 #define CONFIG_SYS_AT91_PLLA 0x20c73f03
147 #define CONFIG_SYS_MCKR 0x1301
148 #define CONFIG_SYS_MCKR_CSS 0x1302
150 #define CONFIG_SPL_NAND_DRIVERS
151 #define CONFIG_SPL_NAND_BASE
152 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
153 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
154 #define CONFIG_SYS_NAND_PAGE_SIZE 0x800
155 #define CONFIG_SYS_NAND_PAGE_COUNT 64
156 #define CONFIG_SYS_NAND_OOBSIZE 64
157 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
158 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
159 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
161 #endif /* __CONFIG_H__ */