ARM: configs: Add da850evm_nand to boot from NAND
[oweals/u-boot.git] / include / configs / usbarmory.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * USB armory MkI board configuration settings
4  * http://inversepath.com/usbarmory
5  *
6  * Copyright (C) 2015, Inverse Path
7  * Andrej Rosano <andrej@inversepath.com>
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #define CONFIG_SYS_FSL_CLK
14
15 #include <asm/arch/imx-regs.h>
16
17 /* U-Boot environment */
18 #define CONFIG_ENV_OFFSET       (6 * 64 * 1024)
19 #define CONFIG_ENV_SIZE         (8 * 1024)
20 #define CONFIG_SYS_MMC_ENV_DEV  0
21
22 /* U-Boot general configurations */
23 #define CONFIG_SYS_CBSIZE       512
24
25 /* UART */
26 #define CONFIG_MXC_UART
27 #define CONFIG_MXC_UART_BASE    UART1_BASE
28
29 /* SD/MMC */
30 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
31 #define CONFIG_SYS_FSL_ESDHC_NUM        1
32
33 /* USB */
34 #define CONFIG_USB_EHCI_MX5
35 #define CONFIG_MXC_USB_PORT     1
36 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
37 #define CONFIG_MXC_USB_FLAGS    0
38
39 /* I2C */
40 #define CONFIG_SYS_I2C
41 #define CONFIG_SYS_I2C_MXC
42 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
43 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
44
45 /* Fuse */
46 #define CONFIG_FSL_IIM
47
48 /* U-Boot memory offsets */
49 #define CONFIG_LOADADDR         0x72000000
50 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
51
52 /* Linux boot */
53 #define CONFIG_HOSTNAME         "usbarmory"
54 #define CONFIG_BOOTCOMMAND                                              \
55         "run distro_bootcmd; "                                          \
56         "setenv bootargs console=${console} ${bootargs_default}; "      \
57         "ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; "              \
58         "ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; "             \
59         "bootz ${kernel_addr_r} - ${fdt_addr_r}"
60
61 #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
62
63 #include <config_distro_bootcmd.h>
64
65 #define MEM_LAYOUT_ENV_SETTINGS                 \
66         "kernel_addr_r=0x70800000\0"            \
67         "fdt_addr_r=0x71000000\0"               \
68         "scriptaddr=0x70800000\0"               \
69         "pxefile_addr_r=0x70800000\0"           \
70         "ramdisk_addr_r=0x73000000\0"
71
72 #define CONFIG_EXTRA_ENV_SETTINGS                               \
73         MEM_LAYOUT_ENV_SETTINGS                                 \
74         "bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0"    \
75         "fdtfile=imx53-usbarmory.dtb\0"                         \
76         "console=ttymxc0,115200\0"                              \
77         BOOTENV
78
79 #ifndef CONFIG_CMDLINE
80 #define USBARMORY_FIT_PATH      "/boot/usbarmory.itb"
81 #define USBARMORY_FIT_ADDR      "0x70800000"
82 #endif
83
84 /* Physical Memory Map */
85 #define PHYS_SDRAM                      CSD0_BASE_ADDR
86 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
87
88 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
89 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
90 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
91
92 #define CONFIG_SYS_INIT_SP_OFFSET \
93         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
94 #define CONFIG_SYS_INIT_SP_ADDR \
95         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
96
97 #define CONFIG_SYS_MEMTEST_START        0x70000000
98 #define CONFIG_SYS_MEMTEST_END          0x90000000
99
100 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
101
102 #endif                          /* __CONFIG_H */