1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2012-2015 Panasonic Corporation
4 * Copyright (C) 2015-2016 Socionext Inc.
5 * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
8 /* U-Boot - Common settings for UniPhier Family */
10 #ifndef __CONFIG_UNIPHIER_COMMON_H__
11 #define __CONFIG_UNIPHIER_COMMON_H__
13 #ifndef CONFIG_SPL_BUILD
14 #include <config_distro_bootcmd.h>
17 #define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
19 #define BOOT_TARGET_DEVICE_MMC(func)
22 #ifdef CONFIG_CMD_UBIFS
23 #define BOOT_TARGET_DEVICE_UBIFS(func) func(UBIFS, ubifs, 0)
25 #define BOOT_TARGET_DEVICE_UBIFS(func)
29 #define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0)
31 #define BOOT_TARGET_DEVICE_USB(func)
34 #define BOOT_TARGET_DEVICES(func) \
35 BOOT_TARGET_DEVICE_MMC(func) \
36 BOOT_TARGET_DEVICE_UBIFS(func) \
37 BOOT_TARGET_DEVICE_USB(func)
42 #define CONFIG_ARMV7_PSCI_1_0
44 /*-----------------------------------------------------------------------
45 * MMU and Cache Setting
46 *----------------------------------------------------------------------*/
48 /* Comment out the following to enable L1 cache */
49 /* #define CONFIG_SYS_ICACHE_OFF */
50 /* #define CONFIG_SYS_DCACHE_OFF */
52 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
54 #define CONFIG_TIMESTAMP
58 #define CONFIG_SYS_MAX_FLASH_SECT 256
59 #define CONFIG_SYS_MONITOR_BASE 0
60 #define CONFIG_SYS_MONITOR_LEN 0x000d0000 /* 832KB */
61 #define CONFIG_SYS_FLASH_BASE 0
64 * flash_toggle does not work for our support card.
65 * We need to use flash_status_poll.
67 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
69 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
71 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
73 /* serial console configuration */
75 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
76 /* Boot Argument Buffer Size */
77 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
79 #define CONFIG_ENV_OFFSET 0x100000
80 #define CONFIG_ENV_SIZE 0x2000
81 /* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
83 #define CONFIG_SYS_MMC_ENV_DEV 0
84 #define CONFIG_SYS_MMC_ENV_PART 1
86 #if !defined(CONFIG_ARM64)
88 #define CONFIG_SYS_TIMER_RATE 1000000
91 #define CONFIG_SYS_MAX_NAND_DEVICE 1
92 #define CONFIG_SYS_NAND_ONFI_DETECTION
93 #define CONFIG_SYS_NAND_REGS_BASE 0x68100000
94 #define CONFIG_SYS_NAND_DATA_BASE 0x68000000
95 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
98 #define CONFIG_SUPPORT_EMMC_BOOT
100 /* memtest works on */
101 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
102 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
105 * Network Configuration
107 #define CONFIG_SERVERIP 192.168.11.1
108 #define CONFIG_IPADDR 192.168.11.10
109 #define CONFIG_GATEWAYIP 192.168.11.1
110 #define CONFIG_NETMASK 255.255.255.0
112 #define CONFIG_LOADADDR 0x85000000
113 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
114 #define CONFIG_SYS_BOOTM_LEN (32 << 20)
116 #if defined(CONFIG_ARM64)
117 /* ARM Trusted Firmware */
118 #define BOOT_IMAGES \
119 "second_image=unph_bl.bin\0" \
120 "third_image=fip.bin\0"
122 #define BOOT_IMAGES \
123 "second_image=u-boot-spl.bin\0" \
124 "third_image=u-boot.bin\0"
127 #define CONFIG_ROOTPATH "/nfs/root/path"
128 #define CONFIG_NFSBOOTCOMMAND \
129 "setenv bootargs $bootargs root=/dev/nfs rw " \
130 "nfsroot=$serverip:$rootpath " \
131 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
135 #define CONFIG_BOOTFILE "fitImage"
136 #define LINUXBOOT_ENV_SETTINGS \
137 "kernel_addr_r=0x85100000\0" \
138 "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
139 "bootm $kernel_addr_r\0" \
140 "__nfsboot=run tftpboot\0"
143 #define CONFIG_BOOTFILE "Image"
144 #define LINUXBOOT_CMD "booti"
145 #define KERNEL_ADDR_R "kernel_addr_r=0x82080000\0"
147 #define CONFIG_BOOTFILE "zImage"
148 #define LINUXBOOT_CMD "bootz"
149 #define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0"
151 #define LINUXBOOT_ENV_SETTINGS \
152 "fdt_addr_r=0x85100000\0" \
154 "ramdisk_addr_r=0x86000000\0" \
155 "ramdisk_file=rootfs.cpio.gz\0" \
156 "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
157 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
158 "tftpboot=tftpboot $kernel_addr_r $bootfile && " \
159 "tftpboot $fdt_addr_r $fdtfile &&" \
160 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
161 "setenv ramdisk_addr_r $ramdisk_addr_r:$filesize &&" \
162 "run boot_common\0" \
163 "__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
164 "tftpboot $fdt_addr_r $fdtfile &&" \
165 "setenv ramdisk_addr_r - &&" \
169 #define CONFIG_EXTRA_ENV_SETTINGS \
171 "initrd_high=0xffffffffffffffff\0" \
172 "scriptaddr=0x85000000\0" \
173 "nor_base=0x42000000\0" \
174 "emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \
175 "nandboot=run bootcmd_ubifs0\0" \
176 "norboot=run tftpboot\0" \
177 "usbboot=run bootcmd_usb0\0" \
178 "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \
179 "tftpboot $tmp_addr $second_image && " \
180 "setexpr tmp_addr $nor_base + 0x70000 && " \
181 "tftpboot $tmp_addr $third_image\0" \
182 "emmcupdate=mmcsetn &&" \
183 "mmc dev $mmc_first_dev &&" \
184 "mmc partconf $mmc_first_dev 0 1 1 &&" \
185 "tftpboot $second_image && " \
186 "mmc write $loadaddr 0 100 && " \
187 "tftpboot $third_image && " \
188 "mmc write $loadaddr 100 f00\0" \
189 "nandupdate=nand erase 0 0x00100000 &&" \
190 "tftpboot $second_image && " \
191 "nand write $loadaddr 0 0x00020000 && " \
192 "tftpboot $third_image && " \
193 "nand write $loadaddr 0x00020000 0x001e0000\0" \
194 "usbupdate=usb start &&" \
195 "tftpboot $second_image && " \
196 "usb write $loadaddr 0 100 && " \
197 "tftpboot $third_image && " \
198 "usb write $loadaddr 100 f00\0" \
200 LINUXBOOT_ENV_SETTINGS \
203 #define CONFIG_SYS_BOOTMAPSZ 0x20000000
205 #define CONFIG_SYS_SDRAM_BASE 0x80000000
207 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
210 #if defined(CONFIG_ARCH_UNIPHIER_LD4) || \
211 defined(CONFIG_ARCH_UNIPHIER_SLD8)
212 #define CONFIG_SPL_TEXT_BASE 0x00040000
214 #define CONFIG_SPL_TEXT_BASE 0x00100000
217 #define CONFIG_SPL_STACK (0x00200000)
219 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
221 /* subtract sizeof(struct image_header) */
222 #define CONFIG_SYS_UBOOT_BASE (0x130000 - 0x40)
224 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
225 #define CONFIG_SPL_MAX_FOOTPRINT 0x10000
226 #define CONFIG_SPL_MAX_SIZE 0x10000
227 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000
229 #define CONFIG_SPL_PAD_TO 0x20000
231 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */