include/configs/udoo_neo.h

   1 /*
   2  * Copyright 2014-2015 Freescale Semiconductor, Inc.
   3  * Copyright Jasbir Matharu
   4  * Copyright 2015 UDOO Team
   5  *
   6  * Configuration settings for the UDOO NEO board.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include <config_distro_defaults.h>
  15 #include "mx6_common.h"
  16
  17 #include "imx6_spl.h"
  18
  19 /* Size of malloc() pool */
  20 #define CONFIG_SYS_MALLOC_LEN           (3 * SZ_1M)
  21 #define CONFIG_BOARD_EARLY_INIT_F
  22 #define CONFIG_BOARD_LATE_INIT
  23 #define CONFIG_MXC_UART
  24
  25 /* MMC Configuration */
  26 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  27
  28 /* Command definition */
  29 #define CONFIG_MXC_UART_BASE            UART1_BASE
  30 #define CONFIG_SYS_MMC_ENV_DEV          0  /*USDHC2*/
  31
  32 /* Linux only */
  33 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  34 #define CONFIG_EXTRA_ENV_SETTINGS \
  35         "fdt_high=0xffffffff\0" \
  36         "initrd_high=0xffffffff\0" \
  37         "fdt_file=undefined\0" \
  38         "fdt_addr=0x83000000\0" \
  39         "ip_dyn=yes\0" \
  40         "mmcdev=0\0" \
  41         "mmcrootfstype=ext4\0" \
  42         "findfdt="\
  43                 "if test $board_name = BASIC; then " \
  44                         "setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \
  45                 "if test $board_name = BASICKS; then " \
  46                         "setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \
  47                 "if test $board_name = FULL; then " \
  48                         "setenv fdt_file imx6sx-udoo-neo-full.dtb; fi; " \
  49                 "if test $board_name = EXTENDED; then " \
  50                         "setenv fdt_file imx6sx-udoo-neo-extended.dtb; fi; " \
  51                 "if test $fdt_file = UNDEFINED; then " \
  52                         "echo WARNING: Could not determine dtb to use; fi; \0" \
  53         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  54         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  55         "ramdisk_addr_r=0x83000000\0" \
  56         "ramdiskaddr=0x83000000\0" \
  57         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
  58         BOOTENV
  59
  60 #define BOOT_TARGET_DEVICES(func) \
  61         func(MMC, mmc, 0)
  62
  63 #define CONFIG_BOOTCOMMAND \
  64         "run findfdt; " \
  65         "run distro_bootcmd"
  66
  67 #include <config_distro_bootcmd.h>
  68
  69 /* Miscellaneous configurable options */
  70 #define CONFIG_SYS_MEMTEST_START        0x80000000
  71 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x10000)
  72 #define CONFIG_STACKSIZE                SZ_128K
  73
  74 /* Physical Memory Map */
  75 #define CONFIG_NR_DRAM_BANKS            1
  76 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  77 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  78 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  79 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  80
  81 #define CONFIG_SYS_INIT_SP_OFFSET \
  82         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  83 #define CONFIG_SYS_INIT_SP_ADDR \
  84         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  85
  86 /* Environment organization */
  87 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
  88 #define CONFIG_ENV_SIZE                 SZ_8K
  89 #define CONFIG_ENV_IS_IN_MMC
  90
  91 #define CONFIG_IMX_THERMAL
  92
  93 #endif                          /* __CONFIG_H */