3 * Texas Instruments Incorporated.
4 * Aneesh V <aneesh@ti.com>
5 * Steve Sakoman <steve@sakoman.com>
7 * TI OMAP4 common configuration settings
9 * SPDX-License-Identifier: GPL-2.0+
12 #ifndef __CONFIG_TI_OMAP4_COMMON_H
13 #define __CONFIG_TI_OMAP4_COMMON_H
16 * High Level Configuration Options
18 #define CONFIG_OMAP4430 1 /* which is in a 4430 */
19 #define CONFIG_MISC_INIT_R
20 #define CONFIG_DISPLAY_CPUINFO 1
21 #define CONFIG_DISPLAY_BOARDINFO 1
23 #define CONFIG_SYS_THUMB_BUILD
25 #ifndef CONFIG_SYS_L2CACHE_OFF
26 #define CONFIG_SYS_L2_PL310 1
27 #define CONFIG_SYS_PL310_BASE 0x48242000
29 #define CONFIG_SYS_CACHELINE_SIZE 32
32 #include <asm/arch/cpu.h>
33 #include <asm/arch/omap.h>
35 /* Use General purpose timer 1 */
36 #define CONFIG_SYS_TIMERBASE GPT2_BASE
39 * Total Size Environment - 128k
41 #define CONFIG_ENV_SIZE (128 << 10)
44 * For the DDR timing information we can either dynamically determine
45 * the timings to use or use pre-determined timings (based on using the
46 * dynamic method. Default to the static timing infomation.
48 #define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
49 #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
50 #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
51 #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
54 #include <configs/ti_armv7_omap.h>
59 #define CONFIG_SYS_NS16550_CLK 48000000
60 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
61 #define CONFIG_SYS_NS16550_SERIAL
62 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
63 #define CONFIG_SYS_NS16550_COM3 UART3_BASE
65 #define CONFIG_CONS_INDEX 3
68 #ifndef CONFIG_SPL_BUILD
69 #define CONFIG_TWL6030_POWER 1
73 #define CONFIG_USB_MUSB_UDC 1
74 #define CONFIG_USB_OMAP3 1
76 /* USB device configuration */
77 #define CONFIG_USB_DEVICE 1
78 #define CONFIG_USB_TTY 1
79 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
84 #define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
85 "bootcmd_" #devtypel #instance "=" \
86 "setenv mmcdev " #instance"; "\
87 "setenv bootpart " #instance":2 ; "\
90 #define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
91 #devtypel #instance " "
93 #define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
94 #devtypel #instance " "
96 #define BOOT_TARGET_DEVICES(func) \
98 func(LEGACY_MMC, legacy_mmc, 0) \
100 func(LEGACY_MMC, legacy_mmc, 1) \
104 #define CONFIG_BOOTCOMMAND \
109 #include <config_distro_bootcmd.h>
111 #define CONFIG_EXTRA_ENV_SETTINGS \
112 DEFAULT_LINUX_BOOT_ENV \
113 DEFAULT_MMC_TI_ARGS \
114 "console=ttyO2,115200n8\0" \
115 "fdtfile=undefined\0" \
118 "bootfile=zImage\0" \
121 "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
122 "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
123 "mmcboot=echo Booting from mmc${mmcdev} ...; " \
125 "bootz ${loadaddr} - ${fdtaddr}\0" \
126 "uimageboot=echo Booting from mmc${mmcdev} ...; " \
128 "bootm ${loadaddr}\0" \
130 "if test $board_name = sdp4430; then " \
131 "setenv fdtfile omap4-sdp.dtb; fi; " \
132 "if test $board_name = panda; then " \
133 "setenv fdtfile omap4-panda.dtb; fi;" \
134 "if test $board_name = panda-a4; then " \
135 "setenv fdtfile omap4-panda-a4.dtb; fi;" \
136 "if test $board_name = panda-es; then " \
137 "setenv fdtfile omap4-panda-es.dtb; fi;" \
138 "if test $board_name = duovero; then " \
139 "setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
140 "if test $fdtfile = undefined; then " \
141 "echo WARNING: Could not determine device tree to use; fi; \0" \
142 "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
147 * It is known that this will break HS devices. Since the current size of
148 * SPL is overlapped with public stack and breaking non HS devices to boot.
149 * So moving TEXT_BASE down to non-HS limit.
151 #define CONFIG_SPL_TEXT_BASE 0x40300000
152 #define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
153 #define CONFIG_SPL_DISPLAY_PRINT
154 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
155 #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
159 #define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
162 #ifdef CONFIG_SPL_BUILD
163 /* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */
164 #undef CONFIG_SYS_I2C
165 #undef CONFIG_SYS_I2C_OMAP24XX
166 #undef CONFIG_SPL_I2C_SUPPORT
169 #endif /* __CONFIG_TI_OMAP4_COMMON_H */